Samsung | SGH-E810 | Samsung SGH-E810 User Manual

* Some of the contents of this manual may differ from your phone,
depending on the software installed or your service provider.
Printed in Korea
World Wide Web
http://www.samsungmobile.com
Code No.:GH68-06639A
English. 03/2005. Rev 1.0
SGH-E810
User Guide
Contents
Important Safety Precautions ...................... 7
Unpacking .................................................... 9
Your Phone ................................................ 10
Phone Layout .....................................................
Display..............................................................
Service Light......................................................
Camera .............................................................
Flashlight ..........................................................
10
13
16
16
16
Getting Started .......................................... 17
Installing the SIM Card........................................
Charging the Battery...........................................
Switching the Phone On or Off..............................
Using the Keypad Lock Feature.............................
17
19
20
21
Call Functions ............................................ 22
Making a Call .....................................................
Adjusting the Volume ..........................................
Answering a Call.................................................
Viewing Missed Calls ...........................................
Quickly Switching to Silent Mode ..........................
22
27
28
29
31
Selecting Functions and Options ................ 32
Using the Soft Keys ............................................ 32
Selecting Options ............................................... 33
Entering Text ............................................. 34
Changing the Text Input Mode .............................
Using Alphabet Mode ..........................................
Using T9 Mode ...................................................
Using Number Mode............................................
Using Symbol Mode ............................................
35
36
37
39
39
3
Contents
Options During a Call ................................. 40
Putting a Call on Hold..........................................
Using the Menu Functions ....................................
Switching Off the Microphone (Mute).....................
Muting or Sending Key Tones ...............................
Sending a Sequence of DTMF Tones ......................
Searching for a Number in Contacts ......................
Call Waiting .......................................................
Making a Multi-party Call .....................................
40
41
42
43
43
44
45
45
Using the Menus ........................................ 48
Accessing a Menu Function by Scrolling ................. 48
Using Shortcuts.................................................. 49
List of Menu Functions......................................... 50
Games & more ........................................... 56
Saved applications.............................................. 56
More games....................................................... 58
DNS settings...................................................... 59
Vodafone live! ............................................ 60
Vodafone live! ....................................................
Enter URL..........................................................
Bookmarks ........................................................
What’s new........................................................
Games ..............................................................
Ringtones ..........................................................
Pictures.............................................................
News ................................................................
Browser settings ................................................
Clear cache........................................................
60
63
64
64
65
65
65
65
66
67
Applications ............................................... 68
Vodafone (SIM AT menu).....................................
Alarms ..............................................................
Calculator..........................................................
To do list ...........................................................
Voice recorder....................................................
Currency converter .............................................
4
68
68
70
71
73
75
Contents
Messages ................................................... 76
Create message ................................................. 76
Inbox................................................................ 85
My messages ..................................................... 90
Call voicemail..................................................... 97
live! Studio ........................................................ 98
Push messages .................................................. 98
Message settings ................................................ 99
Memory status ................................................. 103
Delete all......................................................... 103
Camera .................................................... 105
Take photo ......................................................
Record video....................................................
My photos .......................................................
My videos........................................................
105
109
110
111
My items .................................................. 113
Pictures...........................................................
Games ............................................................
Sounds ...........................................................
My videos........................................................
Templates .......................................................
Memory status .................................................
113
114
115
116
116
116
Calendar .................................................. 117
Consulting the Calendar .................................... 117
Writing a Memo................................................ 117
Viewing a Memo ............................................... 119
Contacts................................................... 120
Contacts list.....................................................
Create contact .................................................
Group search ...................................................
Group edit .......................................................
Call log ...........................................................
Speed dial list ..................................................
My numbers.....................................................
Memory status .................................................
120
123
124
125
126
130
132
132
5
Contents
Settings ................................................... 133
Phone settings .................................................
Display settings................................................
Sound settings .................................................
Call settings.....................................................
Time & date.....................................................
Network selection .............................................
Security ..........................................................
133
137
139
144
151
152
152
Solving Problems ..................................... 157
Access Codes ........................................... 160
Phone Password ...............................................
PIN.................................................................
PUK ................................................................
PIN2 ...............................................................
PUK2 ..............................................................
Barring Password..............................................
160
161
161
162
162
163
Health and Safety Information................. 164
Exposure to Radio Frequency (RF) Waves ............
Precautions When Using Batteries .......................
Road Safety.....................................................
Operating Environment .....................................
Electronic Devices.............................................
Potentially Explosive Environments .....................
Emergency Calls...............................................
Other Important Safety Information....................
Care and Maintenance.......................................
164
165
167
167
168
170
171
172
173
Glossary ................................................... 175
Index ....................................................... 181
Quick Reference Card............................... 187
6
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in an Aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch your phone off near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Follow any special regulations in force in any area
and always switch your phone off whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
then press the
key. You must deactivate any
unnecessary features in use before you can make
an emergency call. Give all necessary information
as accurately as possible. Do not cut off the call
until given permission to do so.
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories
could damage your phone and may be dangerous.
Qualified Service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see “Health
and Safety Information” on page 164.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS
REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
8
Unpacking
Your package contains the following items:
Handset
Travel Charger
Battery
Necklace Headset
User’s Manuals
Finger Ring
Note: The items supplied with your phone may be
different, depending on your country or service
provider.
You can obtain the following accessories for your
phone from your local Samsung dealer:
• Standard/slim battery
• Necklace headset
• Simple handsfree car kit
• Car cradle
• Battery charger
• Finger ring
• Travel charger
• PC data link kit
• Stylish handsfree car kit
9
Your Phone
Phone Layout
The following illustration shows the main elements
of your phone:
Camera
Slider
Earpiece
Display
Navigation (Up/
Down/Left/Right)
keys
Ear-microphone
jack
Soft key (left)
Volume/menu
browse keys
Dial key
Alphanumeric
keys
Menu access/
confirm key (Centre)
Soft key (right)
Power on/off/
menu exit key
Camera key
Cancel/
correction key
IrDA port
Special
function keys
10
Microphone
Your Phone
Key(s)
Description
In Menu mode, scrolls through the
menu options.
When entering text, moves the cursor
up and down depending on the
direction of the key you pressed.
In Idle mode, allows you to access your
favourite menu options directly. For
further details about shortcuts, see
page 135.
When entering text, moves the cursor
to the left and right, depending on the
direction of the key you pressed. When
there are options available, pressing
this key selects the first option
immediately.
In Idle mode, allows you to access your
favourite menu options directly. For
further details about shortcuts, see
page 135.
Performs the functions indicated by the
text above them, on the bottom line of
(soft keys) the display.
Enters Menu mode in Idle mode.
In Menu mode, selects the current
menu or option or confirms your
input. When there are options
available, pressing this key selects the
first option immediately.
Deletes characters from the display.
In Menu mode, returns you to the
previous screen.
11
Your Phone
Key(s)
Description (continued)
Makes or answers a call.
In Idle mode, recalls the last number
dialled, missed or received when held
down.
Ends a call. Also switches on and off the
phone when held down.
In Menu mode, cancels your input and
returns the phone to Idle mode.
In Idle mode, accesses your voicemail
server when held down.
Enters numbers, letters, and some
special characters.
Enters special characters.
Performs various functions.
(on the right side of the phone)
In Idle mode, enters the Camera
menu. Enters Capture mode when held
down.
In Capture mode, takes a photo.
(on the left side of the phone)
During a call, adjusts the earpiece
volume.
In Idle mode, adjusts the keypad tone
volume.
In Menu mode, scrolls through menu
options.
12
Your Phone
Display
Display Layout
The display has three areas:
Icons
Text and
graphics area
Soft key function
indicators
Area
Description
First line
Displays various icons. See
page 14.
Middle lines
Displays messages, instructions,
and any information that you
enter, such as the number you are
dialling.
Last line
Shows the current functions
assigned to the two soft keys.
13
Your Phone
Icons
Icon
Description
Shows the received signal strength. The
greater the number of bars, the stronger
the signal.
Appears when the IrDA port is active. For
details, see page 133.
Appears when you set an alarm to ring at a
specified time.
Appears when you are out of your home
area and have logged onto a different
network; for example, when travelling in
other countries.
Appears when a new SMS (Short Message
Service) message has been received.
Appears when a new voice mail message
has been received.
Appears when a new MMS (Multimedia
Message Service) message has been
received.
Appears when a call is in progress.
Appears when you are out of your service
area. When it displays, you cannot make or
receive a call.
Appears when you are connected to the
GPRS network.
14
Your Phone
Icon
Description (continued)
Appears when you are in Home zone, if
your service provider supports it.
Appears when you are in Office zone, if
your service provider supports it.
Appears when you set incoming calls to be
diverted to another destination. When your
SIM card supports ALS (Alternate Line
Service), it may appears with the number
of the current line, such as
,
, and
.
Appears when Silent mode is active or
when you set the phone to vibrate when
you receive a call. For further details, see
page 31 and page 140 respectively.
Appears when Mute mode is active.
Shows the level of your battery. The more
bars you see, the more power you have
remaining.
Backlight
The backlight illuminates the display and the
keypad. When you press any key or push the slider
up, the backlight comes on. It goes off when no
keys are pressed within a given period of time,
depending on the setting in the Back light menu
(Menu 9.2.3). The display turns off after fifteen
seconds to conserve battery power.
To specify the length of time the backlight is active,
set the Back light menu. See page 138 for further
details.
15
Your Phone
Service Light
The service light, which is a circular light around the
Navigation keys, flashes when services are available
on the phone.
To activate or deactivate the service light, use the
Service light menu (Menu 9.2.4). See page 138
for further details.
Camera
The camera module on the top left of your phone
allows you to take a photo and record a video while
on the move.
For further details about the Camera feature, see
page 105.
Flashlight
You can use the built-in flashlight on the back of the
slider to take photos when it is dark. You can also
use the flashlight in emergency conditions.
For further details about the Flash light option, see
page 108.
16
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available, and so on.
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches or
bending, so be careful when handling,
inserting, or removing the card.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch the phone off by holding
down the
key until the power-off image
displays.
2. Remove the battery. To do so:
➀ Slide the battery lock toward the top of the
phone and hold it in that position.
➁ Lift the battery away, as shown.
17
Getting Started
3. Slide the SIM card into the SIM card socket so
that the card locks into position.
Make sure the metal contacts of the card face
into the phone.
Note: When you need to remove the SIM card,
slide it upward, as shown, and take it out of
the socket.
4. Replace the battery so that the tabs on the end
align with the slots at the bottom of the phone.
18
Getting Started
5. Press the battery down until it clicks into place.
Make sure that the battery is properly installed
before switching on the power.
Charging the Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel charger comes with your phone for
charging the battery. Use only approved batteries
and chargers. Ask your local Samsung dealer for
further details.
The travel charger allows you to use the phone
while the battery is charging, but this causes the
phone to charge more slowly.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery recharges fully in approximately
100 minutes.
1. With the battery in position on the phone, plug
the connector of the travel charger into the jack
at the bottom of the phone.
19
Getting Started
2. Plug the charger into a standard AC wall outlet.
3. When charging is finished, unplug the charger
from the power outlet and disconnect it from the
phone by pressing the buttons on both sides of
the connector and pulling the connector out.
Note: You must unplug the charger before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, a warning tone sounds and a
message repeats at regular intervals on the display.
If this happens, your phone will turn off the
backlight to conserve the remaining battery power.
When the battery level becomes too low, the phone
automatically turns off.
Switching the Phone On or Off
1. Press and hold the
switches on.
key until the phone
2. If the phone asks you to enter a password, enter
a password and press the Centre key or the Ok
soft key.
20
The phone password is preset to “00000000” at
the factory. For further details, see page 160.
Getting Started
3. If the phone asks for a PIN, enter the PIN and
press the Centre key or the Ok soft key. For
further details, see page 161.
The phone searches for your network and, after
finding it, the idle screen appears on the display.
Now, you can make or receive calls.
Note: The display language is preset to English at
the factory. To change the language, use
the Language menu (Menu 9.1.3). For
further details, see page 134.
4. When you wish to switch off the phone, press
and hold the
key until the power-off image
displays.
Using the Keypad Lock Feature
You can push the slider up to use the number
keypad and back down to make the phone compact.
When you push the slider down back in place, the
display turns off and the phone automatically locks
the keypad to keep it from being pressed
accidentally.
When you press and hold down the Left soft key or
one of the Volume keys on the left side of the
phone, the display turns on. To unlock the keypad,
press the Unlock soft key and then press the Ok
soft key. The keypad is activated and you can use
the phone’s functions.
21
Call Functions
Making a Call
When the idle screen displays, enter the area code
and phone number, then press the
key.
Note: When you activate the Auto redial option in
the Extra settings menu (Menu 9.1.5), the
phone will automatically redial up to ten times
when the person does not answer the call or is
already on the phone. See page 136 for further
details.
Making an International Call
1. Press and hold the 0 key.
The + character appears.
2. Enter the country code, area code, and phone
number and press the
key.
Correcting the Number
To clear
Press the
the last digit
displayed
C key or Clear soft key.
any other digit in
the number
Left or Right key until the
cursor is immediately to the
right of the digit to be cleared.
Press the C key or the Clear
soft key. You can also insert a
missing digit simply by
pressing the appropriate key.
the whole display
C key or Clear soft key and
hold it for more than one
second.
22
Call Functions
Ending a Call
When you want to end your call, briefly press the
key or push the slider down.
Redialling the Last Number
The phone stores the numbers of the calls you’ve
dialled, received or missed if the call recipient or
caller is identified. See “Call log” on page 126 for
further details.
To recall any of these numbers:
1. If you have typed characters on the display,
press the
key to return to Idle mode.
2. Press the
key to display a list of the most
recent numbers used, in the order you dialled or
received them.
3. Use the Up and Down keys to scroll through the
numbers until the number you want highlights.
4. To
dial the number
Press the
key.
view the number in
Edit mode
Centre key, or press the
Options soft key and
select View.
delete the number
Options soft key and
select Delete.
delete all of the
numbers on the
Call log list
Options soft key and
select Delete all. For
details, see page 128.
23
Call Functions
Making a Call from the Contacts List
You can store the phone numbers that you use
regularly on the SIM card or the phone’s memory.
These entries are collectively called Contacts.
Once you have stored a number in Contacts, you
can dial a number by pressing a few keys. You can
also assign your most frequently-used numbers to
number keys using the Speed dial feature.
For further details about the Contacts feature, see
page 120.
Storing a Number in Idle Mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in Contacts.
1. Enter the number you want to store.
Note: If you make a mistake while entering a
number, correct it using the C key or the
Clear soft key. For further details, see
page 22.
2. When you are sure that it is correct, press the
Centre key or the Save soft key.
3. Select an icon to identify the category in which
the number is to be stored. Three categories are
available:
•
: Mobile phone number
•
: Office number
•
: Home number
To select the category, press the Left or Right
key and press the Centre key or the Select soft
key.
24
Call Functions
4. Select a memory location, either SIM or Phone,
by pressing the Up or Down key and press the
Centre key or the Select soft key.
Note: When you change phones, any numbers
stored in your SIM card memory are
automatically available with the new phone,
whereas any numbers stored in the phone’s
memory will need to be reentered.
5. Enter a name and press the Centre key or the
Ok soft key.
For further details about how to enter
characters, see page 34.
6. If you do not want to save the number and
name in the suggested location, press the C key
or the Clear soft key to clear the location
number and enter another location by pressing
the numeric keys.
7. Press the Centre key or the Ok soft key to store
the name and number.
After storing, the phone displays the Contacts
entry or name you just created.
8. To
Press the
use the entry options
Options soft key. For
further details, see
page 121.
dial the number
Centre key or the
key.
return to the idle
screen
key.
25
Call Functions
Dialling a Number from Contacts
Once you have stored phone numbers in Contacts,
you can dial them easily and quickly by using the
location numbers that were assigned to them in
Contacts.
Note: If you don’t remember a location number, you
must go into the Contacts list menu to
search for the entry by name. See page 120
To dial a number from the SIM card:
1. In Idle mode, enter the location number of the
number you want to dial and press the
key.
The list of the entries in the SIM card appears.
2. If necessary, scroll through the list using the Up
or Down key.
3. When the number displays, press the Dial soft
key, the
key, or the Centre key.
To dial a number from the phone’s memory:
1. In Idle mode, press and hold the 0 key. A +
appears.
2. Enter the location number of the number you
want and press the
key.
The list of the entries in the phone’s memory
appears.
3. If necessary, scroll through the list using the Up
or Down key.
4. When the number displays, press the Dial soft
key, the
key, or the Centre key.
26
Call Functions
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the Volume keys on the left side of the
phone.
Press the
key to increase the volume level and
the
key to decrease the level.
In Idle mode, you can also adjust the keypad tone
volume using these keys.
27
Call Functions
Answering a Call
When somebody calls you, the phone rings and
displays the incoming call image.
The caller’s phone number or name, if stored in
Contacts, displays.
1. If necessary, push the slider up. Press the
key or the Accept soft key to answer the
incoming call.
When the Anykey answer option in the Extra
settings menu (Menu 9.1.5) is activated, you
can press any key to answer a call except for the
key and the Reject soft key. See
page 135.
When the Active slider option in the Extra
settings menu (Menu 9.1.5) is activated, you
can answer the call simply by pushing the slider
up. See page 136.
Note: To reject the call, press the Reject soft key
or the
key.
2. End the call by pushing the slider down or
pressing the
key.
Note: You can answer a call while using Contacts or
menu features. After ending the call, the
display returns to the function screen you were
using.
28
Call Functions
Viewing Missed Calls
When you are unable to answer a call for any
reason, you can find out who called you so that you
can call the person back.
The number of calls you have missed displays on
the idle screen immediately after a call is missed.
To view a missed call immediately:
1. If necessary, push the slider up.
2. Press the Centre key or the View soft key.
The number for the most recent missed call
displays, if available.
3. To
scroll through the
missed calls
call the number
displayed
Press the
Up or Down key.
key.
edit or delete a missed Centre key or the
call number
Select soft key. See
below.
Editing a Missed Call Number
1. Press the Centre key.
You can also press the Options soft key and
then press the Select soft key or the Centre key
when the View option highlights.
2. Change the number.
29
Call Functions
3. To
Press the
call the number
store the number
key.
Centre key or the Save
soft key and enter a name
and location. For further
details, see page 24.
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, press the Up or Down key to
highlight the Delete option.
3. Press the Centre key or the Select soft key.
You can press the
Missed call feature.
key at any time to exit the
Note: You can access the Missed call feature at any
time by selecting the Missed calls (Menu
8.5.1) menu. For further details, see
page 126.
30
Call Functions
Quickly Switching to Silent Mode
Silent mode is convenient when you wish to stop
the phone from making noise, in a theatre for
example.
In Idle mode, press and hold the
key until the
“Silent mode” message and the Vibration icon ( )
display.
In Silent mode, your phone changes the sound
settings as follows:
Option
New Setting
Alert type
Vibration
Keypad tone
Off
SMS/MMS tone
Light + Vibration
SMS-CB tone
Light only
Slider tone
Off
Power off tone
Off
Error tone
Off
To exit and reactivate the previous sound settings,
press and hold the
key again until “Exit silent
mode” appears. The Vibration icon ( ) no longer
displays.
Notes:
• When you turn off the phone, Silent mode is
automatically deactivated.
• Activating Silent mode will not turn off the camera
shutter sound.
31
Selecting Functions
and Options
Your phone offers a set of functions that allow you
to customise it. These functions are arranged in
menus and sub-menus, accessed using the two soft
keys,
and
. Each menu and sub-menu allows
you to view and alter the settings of a particular
function.
Using the Soft Keys
The roles of the soft keys vary depending on the
function you are currently using; the labels on the
bottom line of the display just above each key
indicate their current role.
Example:
Service Provider
07:30
Tue 09 Mar
Press the left soft
key to access the
Messages menu.
32
Press the right soft key
to launch the WAP
(Wireless Application
Protocol) browser.
Selecting Functions and Options
Selecting Options
To view the various functions and options available
and to select the one you want:
1. Press the appropriate soft key.
2. To
Press the
select the:
• function displayed
• option highlighted
Centre key or the
Select soft key.
view the next function
or highlight the next
option on a list
Down key or the
key on the left side of
the phone.
move back to the
previous function or
option on a list
Up key or the
key
on the left side of the
phone.
move back up one
level in the menu
structure
Back soft key or the C
key.
exit the menu
structure without
changing the settings
key.
In some functions, you may be asked for a
password or PIN. Enter the code and press the
Centre key or the Ok soft key.
Note: When you access a list of options, your phone
highlights the currently active option. If,
however, there are only two options, such as
On/Off or Enable/Disable, your phone
highlights the option that is not currently
active, so that you can select it directly.
33
Entering Text
When using your phone, you will often need to
enter text, such as when storing a name in
Contacts, writing a message, creating your personal
greeting, or scheduling events on your calendar.
You can enter alphanumeric characters by using
your phone’s keypad.
Your phone has the following text input modes:
• Alphabet mode
This mode allows you to enter letters by pressing
the key labelled with the letter you want. Press
the key once, twice, three, or four times until it
displays.
• T9 mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter; for example, pressing
the 5 key can enter J, K, or L. However, T9 mode
automatically compares the series of keystrokes
you make with an internal linguistic dictionary to
determine the most likely word, thus requiring far
fewer keystrokes than the traditional Alphabet
mode.
• Number mode
This mode allows you to enter numbers.
• Symbol mode
This mode allows you to enter various symbols
and special characters.
34
Entering Text
Changing the Text Input Mode
When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator on the display.
Example: Writing an SMS message
Text input mode
indicator
Create message
918/1
Options
Back
1. Press and hold the
key to switch between
Alphabet mode and T9 mode.
In T9 mode,
appears on the menu title bar.
In Alphabet mode, no indicator appears.
2. Press the
modes:
key to switch to the following
To select
Initial Capital mode
Press the
key until
displays.
Capital Lock mode
displays.
Lower Case mode
displays.
Number mode
displays. See page 39.
Symbol mode
displays. See page 39.
Notes:
• Additional text input modes may be available,
depending on your country.
35
Entering Text
Using Alphabet Mode
Use the 1 to 0 keys to enter your text.
1. Press the keys labelled with the letter you want:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to
the right automatically, and then select the
next letter.
Refer to the table below for further details about
available characters:
Key
Characters in the Order Displayed
Upper Case
Lower Case
Note: The characters available in Alphabet mode may
be different, depending on your country.
36
Entering Text
• To insert a space, press the
key.
• You can move the cursor by using the Navigation
keys. To delete letters, press the C key or the
Clear soft key. Press and hold the C key or the
Clear soft key to clear the display.
Using T9 Mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes. This
text input mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word
by pressing the keys 2 to 9. Press each key only
once for each letter.
Example: To enter “Hello” in T9 mode,
press the 4, 3, 5, 5, and 6 keys.
The word that you are typing appears on the
display. It may change with each key that you
press.
2. Enter the whole word before editing or deleting
the keystrokes.
3. When the word displays correctly, go to step 4.
If the word doesn’t display correctly, press the 0
key or the Up or Down key repeatedly to display
alternative word choices for the keys that you
have pressed.
Example: Both “Of” and “Me” use the 6 and 3
keys. The phone displays the most
commonly used choice first.
4. Put a space by pressing the
entering the next word.
key and start
37
Entering Text
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the
word you want to add, press the 0 or Down key
to display the alternative words.
2. When there are no more alternative words, the
display shows Add on the bottom line. Press the
Centre key or the Add soft key.
3. If necessary, clear the word using the Clear soft
key or the C key and enter the word you want to
add using Alphabet mode. See page 36.
4. Press the Centre key or the Ok soft key.
The word is added to the T9 dictionary and
becomes the first word for the associated
keypress series.
Note: This feature may not be available for some
languages.
• To enter periods, hyphens, or apostrophes, press
the 1 key. T9 mode applies grammar rules to
ensure that correct punctuation is used.
Example: The 1 key is used twice to display two
punctuation marks:
L
e
t
’
s
e
a
t
.
• You can move the cursor by using the Navigation
key. To delete letters, press the C key or the
Clear soft key. Press and hold the C key or the
Clear soft key to clear the display.
38
Entering Text
Using Number Mode
Number mode enables you to enter numbers. Press
the keys corresponding to the digits you want to
enter.
Using Symbol Mode
Symbol mode enables you to insert symbols.
To
Press the
select a symbol
corresponding numeric
key.
display more symbols
Up or Down key.
insert the symbol(s)
into your message
Centre key or the Ok soft
key.
clear the symbol(s)
Clear soft key or the C
key. When the input field
is empty, this key returns
to the previous mode.
return to the previous
input mode
Back soft key or C key.
39
Options During a Call
Your phone provides a number of control functions
that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if your network supports this
service.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want,
by pressing the Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or
look it up in Contacts.
For details about searching for a number in
Contacts, see page 120.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Alternatively,
1. Put the current call on hold by pressing the Hold
soft key.
2. Make the second call in the normal way.
When you have an active call and a call on hold, you
may switch between the two calls, changing the one
on hold to active and placing the other on hold.
40
Options During a Call
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with that person.
When you want to finish, end each call normally by
pressing the
key.
Using the Menu Functions
You can access the main menu functions during a
call.
1. Press the Centre key.
You can also press the Options soft key and
then press the Centre key or press the Ok soft
key when the Menu option highlights.
2. Press the Up or Down key to scroll through the
menu list.
Note: You cannot use some menus during a call.
They are deactivated on this list.
3. When the menu you want highlights, press the
Centre key or the Select soft key.
4. If the selected menu has sub-options, repeat
steps 2 and 3.
For further details about available menu functions,
see the list on page 50.
41
Options During a Call
Switching Off the Microphone (Mute)
You can temporarily switch your phone’s
microphone off so that the other person on the
phone cannot hear you.
Example: You wish to say something to person in
the room, but do not want the person on
the phone to hear you.
To switch off the microphone temporarily:
1. Press the Options soft key.
2. Press the Down key to highlight the Mute
option.
3. Press the Centre key or the Ok soft key.
The other person can no longer hear you.
To switch back off the microphone:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the
Unmute option.
3. Press the Centre key or the Ok soft key.
The other person can hear you again.
42
Options During a Call
Muting or Sending Key Tones
The Mute keys and Send keys options allow you
to turn the key tones off or on. If the Mute keys
option is selected, your phone does not transmit the
DTMF (Dual Tone Multi-Frequency) tones of the
keys, which allows you to press keys without
hearing annoying key tones during a call.
Note: To communicate with answering machines or
computerised telephone systems, the Send
keys option must be selected.
Sending a Sequence of DTMF Tones
You can send the DTMF tones as a group after
entering all of the number you need to send.
This option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
To send the DTMF tones:
1. While connected to the teleservice system, press
the Options soft key.
2. Press the Down key to highlight the Send DTMF
option.
3. Press the Centre key or the Ok soft key.
4. Enter the number you want to send and press
the Centre key.
The tones are sent.
43
Options During a Call
Searching for a Number in Contacts
You can search for a number in Contacts during a
call.
1. Press the Options soft key.
2. Press the Down key to highlight the Contacts
option.
3. Press the Centre key or the Ok soft key.
The Contacts entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the
Contacts entries are listed starting with the first
entry matching your input.
5. To view the highlighted entry, press the Centre
key or the View soft key.
For further details about the Contacts feature, see
page 120.
44
Options During a Call
Call Waiting
You can answer an incoming call while you have a
call in progress, if your network supports this
service and you have set the Call waiting menu
(Menu 9.4.3) to Activate; see page 147. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the Swap
soft key.
3. To end the call on hold, press the Options soft
key and select the End held call option.
To end the current call, press the
key.
Making a Multi-party Call
A multi-party call is a network service that allows
up to six people to take part simultaneously in a
multi-party or conference call. For further details
about subscribing to this service, contact your
service provider.
Setting up a Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
45
Options During a Call
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the Centre key or the Ok soft
key.
4. To add a new person to the multi-party call, call
the new person in the normal way and press the
Options soft key. Select the Join option and
press the Centre key or the Ok soft key.
You can add incoming callers by answering the call,
pressing the Options soft key, and selecting the
Join option. Repeat as required.
Having a Private Conversation with One
Participant
1. Press the Options soft key and choose the
Select one option. Press the Centre key.
The list of call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key and press the
key.
3. When the Private option highlights, press the
Centre key or the Ok soft key.
Now you can talk privately to that person. The
other participants can still converse with each
other.
4. To return to the multi-party call, press the
Options soft key and select the Join option.
Press the Centre key or the Ok soft key.
All the multi-party call participants can now hear
each other.
46
Options During a Call
Dropping One Participant
1. Press the Options soft key and choose the
Select one option. Press the Centre key or the
Ok soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key and press the
key.
3. Press the Down key to select the Remove
option and press the Centre key or the Ok soft
key.
The call with that participant ends, but you can
continue to talk to the others.
4. When you want to end the multi-party call, push
the slider down or press the
key.
47
Using the Menus
The phone offers a range of functions that allow you
to tailor it to your needs. These functions are
arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling using the Navigation keys or by using the
shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Centre key to access
Menu mode.
2. Scroll using the Navigation keys to reach a main
menu, Settings for example. Press the Centre
key or the Select soft key to enter the menu.
3. Scroll using the Up or Down key to reach a
menu, Phone settings for example. Press the
Centre key or the Select soft key to enter the
menu.
4. If the menu contains sub-menus, Language for
example, you can access them by scrolling using
the Up or Down key and pressing the Centre key
or the Select soft key.
If the menu that you have selected contains
further options, repeat this step.
5. To
48
Press the
scroll through the
menus
Up or Down key, or use
the Volume keys.
confirm the chosen
setting
Centre key or the
Select soft key.
Using the Menus
5. To
Press the
return to the previous Back soft key or C key.
menu level
exit the menu without
changing the settings
key.
Using Shortcuts
Menu items, such as menus, sub-menus and
options, can be accessed quickly by using their
shortcut numbers. For the main menus, you can
access any one of them by pressing the number keys
(1 to 9) corresponding to their location on the screen.
Press the Centre key and enter the number of the
menu you want.
Notes:
• The numbers assigned to each menu are indicated
on the list on page 50. They may not match the
menu number on the phone, depending on the
services supported by your SIM card.
• For menu number 10 and 11, use the 0 and
keys
respectively.
Example: Accessing the Language menu.
1. Press the Centre key.
2. Press the 9 key for Settings.
3. Press the 1 key for Phone settings.
4. Press the 3 key for Language.
The languages available display.
49
Using the Menus
List of Menu Functions
The following list shows the menu structure
available and indicates the number assigned to
each option and the page where you can find a
description of each feature.
1. Games & more (see page 56)
1.1 Saved applications
1.2 More games
1.3 DNS settings
2. Vodafone live! (see page 60)
2.1 Vodafone live!
2.2 Enter URL
2.3 Bookmarks
2.4 What’s new
2.5 Games
2.6 Ringtones
2.7 Pictures
2.8 News
2.9 Browser settings
2.10 Clear cache
3. Applications (see page 68)
3.1 Vodafone (SIM AT menu)
3.2 Alarms
3.1.1 Once alarm
3.1.2 Daily alarm
3.1.3 Morning call
3.1.4 Remove all alarms
3.1.5 Autopower
3.3 Calculator
3.4 To do list
3.5 Voice recorder
3.5.1 Record
3.5.2 My sounds
3.5.3 Delete all
3.5.4 Memory status
3.6 Currency converter
50
Using the Menus
4. Messages (see page 76)
4.1 Create message
4.1.1 MMS
4.1.2 SMS
4.1.3 Postcard
4.2 Inbox
4.2.1 MMS
4.2.2 SMS
4.3 My messages
4.3.1 Drafts
4.3.1.1 MMS Drafts
4.3.1.2 SMS Drafts
4.3.1.3 Postcard
4.3.2 Outbox
4.3.2.1 MMS
4.3.2.2 Postcard
4.3.3 Templates
4.3.3.1 MMS templates
4.3.3.2 SMS templates
4.3.4 Cell broadcast
4.3.4.1 Read
4.3.4.2 Receive
4.3.4.3 Channel list
4.3.4.4 Language
4.4 Call voicemail
4.4.1 Connect to voice server
4.4.2 Voice server number
4.5 live! Studio
4.6 Push messages
4.6.1 Inbox
4.6.2 Receive
4.6.3 Delete all
4.7 Message settings
4.7.1 MMS settings
4.7.2 MMS profiles
4.7.3 SMS settings
4.8 Memory status
4.8.1 MMS
4.8.2 SMS
51
Using the Menus
4. Messages (continued)
4.9 Delete all
4.9.1 MMS
4.9.2 SMS
4.9.3 Postcard
5. Camera (see page 105)
5.1
5.2
5.3
5.4
Take photo
Record video
My photos
My videos
6. My items (see page 113)
6.1 Pictures
6.1.1 My photos
6.1.2 Saved pictures
6.1.3 Download more
6.2 Games
6.2.1 Saved games
6.2.2 Download more
6.3 Sounds
6.3.1 My sounds
6.3.2 Saved sounds
6.3.3 Download more
6.4 My videos
6.5 Templates
6.5.1 MMS templates
6.5.2 SMS templates
6.6 Memory status
6.6.1 Games
6.6.2 Sounds & images
6.6.3 Photos & videos
7. Calendar (see page 117)
52
Using the Menus
8. Contacts (see page 120)
8.1
8.2
8.3
8.4
8.5
Contacts list
Create contact
Group search
Group edit
Call log
8.5.1 Missed calls
8.5.2 Received calls
8.5.3 Dialled calls
8.5.4 Delete all
8.5.5 Call time
8.5.6 Call costs*
8.5.7 Data counter
8.6 Speed dial list
8.7 My numbers
8.8 Memory status
9. Settings (see page 133)
9.1 Phone settings
9.1.1 Activate infrared
9.1.2 Greeting message
9.1.3 Language
9.1.4 Shortcuts
9.1.4.1 Key up
9.1.4.2 Key down
9.1.4.3 Key right
9.1.4.4 Key left
9.1.5 Extra settings
9.1.6 Reset settings
9.2 Display settings
9.2.1 Main display
9.2.1.1 Wallpaper
9.2.1.2 Text display
9.2.1.3 Text colour
9.2.2 Menu style
9.2.3 Back light
9.2.4 Service light
9.2.5 Graphic logo
* Actives only if supported by your SIM card.
53
Using the Menus
9. Settings (continued)
9.3 Sound settings
9.3.1 Ringtone
9.3.2 Ring volume
9.3.3 Alert type
9.3.4 Keypad tone
9.3.5 Message tone
9.3.5.1 SMS tone
9.3.5.2 SMS-CB tone
9.3.5.3 MMS tone
9.3.5.4 Repetiton
9.3.6 Slider tone
9.3.7 Power on/off
9.3.8 Alert on call
9.3.9 Extra tones
9.4 Call settings
9.4.1 Call diverting
9.4.1.1 Divert always
9.4.1.2 Busy
9.4.1.3 No reply
9.4.1.4 Unreachable
9.4.1.5 Cancel all
9.4.2 Call barring
9.4.2.1 All outgoing
9.4.2.2 International
9.4.2.3 International except home
9.4.2.4 All incoming
9.4.2.5 Incoming while abroad
9.4.2.6 Cancel all
9.4.2.7 Change barring password
9.4.3 Call waiting
9.4.4 Caller ID
9.4.4.1 Default
9.4.4.2 Hide number
9.4.4.3 Send number
9.4.5 Closed user group
9.4.5.1 Index list
9.4.5.2 Outside access
9.4.5.3 Default group
9.4.5.4 Deactivate*
* Shows when the closed user group feature is activated.
54
Using the Menus
9. Settings (continued)
9.5 Time & date
9.5.1 Set time
9.5.2 Set date
9.5.3 World time
9.5.4 Time format
9.5.5 Display options
9.6 Network selection
9.6.1 Automatic
9.6.2 Manual
9.7 Security
9.7.1 PIN check
9.7.2 Change PIN
9.7.3 Phone lock
9.7.4 Change password
9.7.5 Privacy
9.7.6 SIM lock
9.7.7 FDN mode*
9.7.8 Change PIN2*
* Shows only if supported by your SIM card.
55
Games & more
In this menu, you can
• enjoy downloaded MIDlets (Java applications that
run on mobile phones).
• download applications from the web site provided
by your service provider.
• change the DNS (Domain name server) setting
required for accessing Java services, if necessary.
Saved applications
When you access this menu, the list of the default
games appears. Once you have downloaded games,
they are added to the list.
Launching a MIDlet
Note: The procedure explained below are for the
default games. For downloaded games, the
procedure may be different.
1. Scroll to the MIDlet you want on the Games list
and press the Centre key.
2. On the startup screen of the MIDlet, scroll to an
option using the Navigation keys or the 2, 4, 6
and 8 keys.
The following options are available:
• START GAME: starts a new game.
• CONTINUE: allows you to continue the last
game you played.
• HIGH SCORE: shows the high score table.
This option may not be available for some
games.
56
Games & more
• HOW TO PLAY: shows how to play the game
and the key functions for the game.
• OPTION: allows you to switch on or off the
game sound.
3. Press the Centre key or the 5 key or the Centre
key to confirm your selection.
While you are playing a
game, to
Press the
adjust the sound volume
Volume keys.
return to the startup
screen
key.
exit the game
key.
Viewing MIDlet Information
1. Scroll to the MIDlet you want and press the Info
soft key.
The display shows information about the MIDlet,
such as the file size, application version, and its
vendor.
2. Press the Up or Down key to scroll through the
information screen. Press the Left or Right key
to scroll to other MIDlet information.
3. If you want to delete the MIDlet, press the
Delete soft key and then press the Centre key
or the Yes soft key to confirm the deletion.
Note: When you select default games from the
list, the Delete option is not available.
4. To exit and return to the Games list, press the
Back soft key or the C key.
57
Games & more
Entering Text
If you need to enter text while using a MIDlet, you
can use the following input modes:
Upper-case character mode (A): allows you to
enter upper-case English characters.
Lower-case character mode (a): allows you to
enter lower-case English characters.
Number mode (1): allows you to enter numbers.
Symbol mode: allows you to enter symbols. After
highlighting a symbol by pressing the Navigation
keys, press the Centre key to insert it.
T9 mode (T9): allows you to enter English
characters by pressing one key per letter. In this
mode, you can change the case by pressing the 0
key.
To change the text input mode, press the
key
until the appropriate indicator appears on the soft
key area of the display.
More games
When you select this menu, you are accessed to the
web site preset by your service provider and
download more MIDlet games.
Note: Downloading Java applications may not be
available, depending on your service provider.
58
Games & more
DNS settings
The DNS (Domain Name Server) is the server that
assigns the Java server domain name to an IP
address. The DNS setting is preset at the factory,
but sometimes you may need to change it at your
service provider’s instructions.
1. Enter the primary address using the number
keypad and press the Centre key or the Ok soft
key.
2. Enter the secondary address and press the
Centre key or the Ok soft key.
59
Vodafone live!
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access
and navigate the Wireless Web using your phone.
Vodafone live!
Selecting this menu connects the phone to the
network and loads the homepage of the Wireless
Web service provider. You can also press the
live! soft key in Idle mode to launch the browser.
The contents of the WAP Browser startup homepage
depends on your Wireless Web service provider. To
scroll through the screen, use the Up or Down keys.
Note: To go to the startup homepage from any other
screen in the WAP browser, use the Home
option. For further details about the WAP
Browser menus, see page 62.
Exiting the WAP Browser
To exit the browser at any time, simply press and
hold the
key.
Navigating the WAP Browser
To
Press the
scroll through and
select browser
items
Up or Down key and then
press the Centre key or the
Select soft key to confirm the
selection.
return to the
previous page
Back soft key or the C key.
60
Vodafone live!
To
Press the
return to the
startup homepage
key for more than 2
seconds and select Home. For
further details about this
option, see page 62.
use the Browser
menu
key for more than 2
seconds.
Entering Text in the WAP Browser
When you are prompted to enter text, the current
text input mode is indicated on the screen.
To change the text input mode, press the Centre
key one or more times.
The following modes are available:
Upper-case character mode (A): allows you to
enter upper-case English characters.
Lower-case character mode (a): allows you to
enter lower-case English characters.
Note: You can enter symbols and punctuation marks
in Upper-case or Lower-case Character mode.
For details about available characters, see
page 36.
T9 mode (T9): allows you to enter English
characters by pressing one key per letter. In this
mode, you can use only the 0 key to display
alternative words. To change case, press and hold
the
key.
Number mode (1): allows you to enter numbers.
61
Vodafone live!
Selecting and Using Browser Menu
Options
Various menu options are available when you are
using the WAP browser to navigate the Wireless
Web.
To access a menu option:
1. Press and hold the
key.
A menu list displays.
2. Highlight a menu by pressing the Up or Down
key.
3. Select an option by pressing the Centre key or
the Select soft key.
4. If necessary, select a secondary option using the
Up or Down keys, and press the Centre key or
the Select soft key to confirm.
Note: The menus may vary, depending on your
version of the WAP browser.
The following options are available:
Bookmarks: shows the bookmarks list. You can
bookmark the current web page or access one of
bookmarked pages.
Reload: reloads the current page.
Home: takes you back at any time to the home
page of the Wireless Web service provider.
Go to URL: allows you to manually enter the URL
address of a Web page. After entering an address,
press the Ok soft key to go there directly.
62
Vodafone live!
Show URL: displays the URL address of the Web
page to which you are currently connected. It also
enables you to set the current site as the startup
home page.
To
Press the
set the current
page as your
startup home page
Options soft key and select
the Save to home option.
set a bookmark for
the current page
Option soft key and select
the Save to bookmark
option.
cancel your setting
C key or Back soft key.
Clear cache: deletes the information stored in the
cache. The cache stores the most recently accessed
Web pages.
Security info: shows security information when
you access the wireless web with the secured WAP
setting activated.
Inbox: allows you to read messages received from
a web server.
Show images: shows the image on the current
web page.
Enter URL
This menu allows you to manually enter the URL
address of the Web site that you wish to access.
For further details about how to enter characters,
see page 34.
After entering the address, press the Ok soft key or
Centre key to access the web site.
63
Vodafone live!
Bookmarks
This menu allows you to store up to 13 URL
addresses. The first to fourth bookmark item is a
default link preset by your service provider.
You can access this menu directly by pressing and
holding the
key while using the WAP browser.
To store a URL address:
1. Select an empty location and press the Centre
key or the Edit soft key.
2. Enter the address and press the Centre key or
Ok soft key.
For further details about how to enter
characters, see page 34.
3. Enter a name for the item and press the Ok soft
key or the Centre key.
After saving an item, you can use the following
options by pressing the Options soft key:
Go to URL: takes you to the site.
Edit: allows you to edit the address and the name
of the bookmark item.
Delete: deletes the bookmark item.
What’s new
Selecting this menu loads the web site preset by
your service provider so that you can obtain latest
information about your service provider.
64
Vodafone live!
Games
Selecting this menu loads the web site preset by
your service provider so that you can obtain
information about latest games and download
various games.
Ringtones
Selecting this menu loads the web site preset by
your service provider so that you can download
various ring tones and melodies.
Note: You may not able to download some ring tones
if they are not in the correct file format.
Pictures
Selecting this menu loads the web site preset by
your service provider so that you can download
various pictures and animated images.
Note: You may not able to download some pictures if
they are not in the correct file format.
News
Selecting this menu loads the web site preset by
your service provider so that you can obtain latest
news.
65
Vodafone live!
Browser settings
This menu allows you to set up four proxy servers
for the WAP browser. Contact your service provider
for details about your WAP profile options.
Notes:
• The last profile accessed is automatically selected for
connecting to the Wireless Web.
• Changing the default profile, Vodafone live!, is not
allowed.
• Depending on your country, the availability of the
setting options may vary.
For each server, the following options are available:
Profile name: enter a name that you wish to
assign to the HTTP server.
Homepage URL: set the address of your startup
homepage. When the default homepage displays,
you can delete it using the Clear soft key or the C
key and enter your own choice.
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-secure.
Bearer: select a bearer to be used for each type of
network address accessed; GPRS, Data, or GPRS
preferred.
When you select GPRS preferred, the phone
searches for a GPRS network first. If a GPRS
network is not available, the phone uses a GSM
(Data) network.
The remaining options depend on the Bearer
setting.
66
Vodafone live!
When the bearer is set to GPRS or GPRS
preferred:
IP address: enter the WAP gateway address
required to connect to the Internet.
User name: enter the User ID required to connect
to the GPRS network.
Password: enter the password required to connect
to the GPRS network.
APN: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to Data:
IP address: enter the WAP gateway address
required to connect to the Internet.
Login name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up number: enter the PPP server phone
number.
Data call type: select a data call type; Analogue
or ISDN.
Note: The WAP browser settings may vary, depending
on the service provider. Contact your service
provider for further details.
Clear cache
You can clear the information stored in the cache,
the phone’s temporary memory in which the most
recently accessed Web pages are stored.
Press the Yes soft key or the Centre key to confirm
the deletion. Otherwise, press the No soft key or
the C key.
67
Applications
In this menu, you can use the various applications
which provides you with convenient features.
Vodafone (SIM AT menu)
This menu is available if you use a SIM AT card that
provides additional services, such as news, weather,
sports, entertainment, and location services.
Available services may vary, depending on your
service provider’s service plans.
For further details, see your SIM card instructions
or contact your service provider.
Alarms
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring
the alarm even if the phone is switched off.
The following options are available:
Once alarm: the alarm rings only once and is then
deactivated.
Daily alarm: the alarm rings every day at the
same time.
Morning call: the alarm rings to wake you up in
the morning.
To set an alarm:
1. Choose the type of alarm to be set and press the
Centre key or the Select soft key.
68
Applications
2. Enter the time for the alarm to sound.
Note: Your phone is preset to a 24-hour format.
To change the format, see page 151.
If you want to use the alarm options, press the
Options soft key. The following options are
available:
• Set alarm: sets the alarm.
• Remove alarm: deactivates the current
alarm.
• Alarm tone: allows you to select the alarm
melody.
3. Press the Centre key or the Ok soft key.
4. If applicable, select AM or PM and press the
Centre key or the Select soft key.
5. If you select Morning call in step 1, choose the
repeat option, Monday to friday or Monday to
saturday, and press the Centre key or the
Select soft key.
To stop the alarm when it rings, press one of the
Exit soft key, the Volume keys, and the
key.
Remove all alarms: deactivates all alarm settings.
Autopower: when this option is set to Enable, the
alarm rings at the specified time, even if the phone
is switched off.
If the option is set to Disable and the phone is
switched off at the specified time, the alarm does
not ring.
69
Applications
Calculator
With this feature, you can use the phone as a
calculator. The calculator provides basic arithmetic
functions: addition, subtraction, multiplication, and
division.
1. Enter the first number using the numeric keys.
Notes:
• You can move the cursor by pressing the
or
key.
• To delete mistakes or clear the display, press the
C key or the Clear soft key.
• To include a decimal point or a bracket, press the
left soft key until the symbol you want displays.
2. Enter the operation for your calculation by
pressing the Navigation keys, according to the
illustration on the display.
3. Enter the second number.
4. To view the result, press the Centre key.
5. Repeat steps 1 to 4 as many times as required.
70
Applications
To do list
This feature allows you to:
• enter a list of tasks to be done.
• assign a priority and a deadline to each task.
• sort the tasks by priority and status.
Creating the To Do List
1. Press the Centre key or the Add new soft key.
2. Enter the first task.
Note: For further details about how to enter
characters, see page 34.
3. Press the Centre key or the Ok soft key.
4. Select a priority level of High, Normal, or Low,
using the Up or Down key and press the Centre
key or the Select soft key.
5. Enter your deadline and press the Centre key or
the Skip soft key.
If you don’t want to set a deadline, press the
Skip soft key.
Editing the To Do List
When you select the To do list menu, the current
contents display with the status mark, if the task
has been done, and priority;
for High,
for
Normal, and
for Low.
Scroll to a task from the list and press the Centre
key to view the details for the task. You can scroll
through the tasks using the Up and Down keys, if
necessary.
71
Applications
To change the status of a specific task, press the
key to mark the task as completed as of the current
time and date.
You can use the following options by pressing the
Options soft key:
View: shows the details of a specific task.
Add new: allows you to create a new task.
Status: allows you to change the status of a task.
Select the appropriate status (Completed or To
do)
Edit: allows you to edit a task. You can change the
text, priority, and/or deadline for the task.
Sort: allows you to sort the existing tasks by
priority or status. Select the sort criterion
(High, Low, Completed, or To do).
Copy: allows you to copy a task.
Copy to calendar: allows you to copy a task to the
calendar as a memo. You can also change the text
and deadline for the task and/or set the alarm.
Delete: deletes a task.
Delete all: allows you to delete all tasks.
72
Applications
Voice recorder
You can record voice memos. After recording, you
can send a memo to other people via MMS
message.
Record
This menu allows you to record a new memo. When
you select this menu, the display shows a 30second timer.
1. To start recording, press the Centre key or the
Record soft key.
2. Record a memo by speaking into the
microphone.
3. When you press the Centre key or the Stop soft
key, or if the recording time expires, the
following options display:
• Play: plays back your memo.
• Re-record: discards the memo and enables
you to record another one.
• Save: allows you to save the memo.
4. To save the memo, choose Save from the
options and press the Centre key or the Select
soft key.
5. Press the Clear soft key or the C key to clear
the default name, if necessary, and enter a
name for the memo.
For further details about how to enter
characters, see page 34.
6. Press the Centre key or the Ok soft key.
The memo is saved and then the display shows
the memo information.
73
Applications
7. Press the Options soft key to use the following
memo options:
• Send MMS: allows you to send the memo to
other people by using the MMS feature. See
page 76 for further details about sending a
message.
• Rename: allows you to change the memo’s
name.
• Delete: deletes the memo.
Note: To select the Send MMS option directly,
press the Centre key.
8. To exit, press the Back soft key or the C key.
My sounds
This menu shows a list of saved voice memos.
Scroll to a memo and press the Centre key to play
the memo.
On the My sounds list, press the Options soft key
to use the following options:
Play: plays the memo.
Send MMS: allows you to send the memo to other
people by using the MMS feature. See page 76 for
further details about sending a message.
Rename: allows you to change the memo’s name.
Information: displays information about the
memo, such as the name, the date when the memo
was made, recording duration, and memory size.
Delete: deletes the memo.
74
Applications
Delete all
In this menu, you can delete all of your voice
memos.
When a confirmation message appears, press the
Centre key or the Yes soft key. When the phone
asks for confirmation again, press the Centre key or
the Yes soft key one more time.
Memory status
You can check the amount of memory being used
and the memory remaining for voice memos.
The display shows the total, free, and used
memory, including the number of memos you
recorded and the total number of memos you can
record. Press the Up and Down keys to scroll
through the screen.
Currency converter
Using this menu, you can figure out currency
conversions.
1. Enter the current exchange rate of your source
currency and press the Centre key or the Ok
soft key.
You can insert a decimal point by pressing
the
key.
2. Enter the amount to convert and press the
Centre key or the Ok soft key.
The amount you entered and its equivalent
value display.
3. Press the Exit soft key to exit the currency
convertor.
75
Messages
Using the Messages menu, you can use various
message features, such as:
• SMS (Short Message Service) messages
• MMS (Multimedia Message Service) messages
• Postcards
• WAP push messages
• voice mail
• cell broadcast messages
You can also access online album, mail services
preset by your service provider.
Note: You can quickly access the Messages menu by
pressing the
soft key in Idle mode.
Create message
This menu allows you to create a new message.
MMS
Multimedia Message Service (MMS) is a messaging
service that provides delivery of personal MMS
messages from phone to phone or from phone to email.
In addition to the familiar text content of SMS
messages, MMS messages can contain images,
graphics, voice, and audio clips. An MMS message is
a multimedia presentation in a single file entry. It is
not a text file with attachments.
76
Messages
Using the MMS feature, your phone can receive and
send MMS messages that contain multimedia files,
such as photos, sounds, and images you
downloaded from the Internet and voice memos
you recorded. This function is available only if it is
supported by your service provider.
Only phones that offer MMS messaging features can
receive and display MMS messages.
Creating and Sending a MMS Message
1. Enter the subject of your message.
For further details about how to enter
characters, see page 34.
By pressing the Options soft key, you can use
the following options:
• Ok: confirms the entered subject and
continues to the next step.
• Input method: allows you to change the text
input mode.
• Input language: allows you to change the
language to be used in T9 input mode.
2. Press the Centre key when you have finished
entering the subject.
3. When Add here highlights, press the Centre key
or the Options soft key and add the message
contents using one of the following options:
• Add text: allows you to enter the message
text. After entering text, press the Centre key.
• Add photo: allows you to add a photo you
took using the camera on your phone. Select
Take photo to take a new photo, or My
photos to add one of the photos stored in the
phone’s memory. For further details about
using the camera, see page 105.
77
Messages
• Add picture: allows you to add a picture
stored in the Pictures folder. You can add
some downloaded images if they are in the
correct format and your service provider
supports them.
• Add sound: allows you to add a sound file.
You can record a new voice memo or select
one of voice memos or sounds stored in the
phone’s memory.
• Send message: allows you to send the
message. Use this option when you finish
creating the message.
• Save: saves the message in the MMS Drafts
or MMS template box for later use.
• Settings: allows you to change the message
settings. For further details about each setting
option, see page 99. After changing the
settings, you need to press the Back soft key
or the C key to go to back to the Options list.
• Preview: shows the entire message.
Note: You can add text, an image and a sound
once for each page.
4. Repeat step 2 until you finish creating your
message.
5. If you want to change the added items, press
the Up or Down key to highlight one and press
the Centre key or the Options soft key to
display the Options list.
Note: The options available are different
depending on whether the item you select
on the message screen is text, an image, a
sound, or the Page field.
The following options are available:
78
Messages
• Edit text/photo/picture/sound: allows you
to change the text or replace the image or
sound with another one.
• Add page: allows you to add up to 5 pages.
After you add a page, the display shows you
the current page number and memory space
used for the page. You can move to each page
using the Left or Right key on the message
screen.
• Delete text/photo/picture/sound: deletes
the item from your message.
• Duration: allows you to set when and how
long text, an image or a sound displays on the
message presentation screen. If the duration
you set is shorter than the content duration for
a particular page, the content duration is
automatically decreased.
• Send message: allows you to send the
message.
• Save: saves the message in the MMS Drafts
or MMS template box for later use.
• Settings: allows you to change the message
settings. For further details about each setting
option, see page 99.
• Preview: shows the entire message.
6. When you have finished creating the message,
choose Send message from the options and
press the Centre key or the Select soft key.
7. Select a destination type (To, Cc, or Bcc) and
press the Centre key or the Select soft key.
8. Choose one of the following options and press
the Centre key or the Select soft key:
79
Messages
• Contacts list: allows you to retrieve a number
or e-mail address from your Contacts list.
• Phone number: allows you to enter the
phone number you want.
• E-mail address: allows you to enter the email address of the recipient.
9. Enter a number or an e-mail address, or select
a number from the Contacts list.
10. When the correct number or address displays,
press the Centre key or the Ok soft key.
11. To add a destination, press the Centre key or
the Select soft key when Add contacts
highlights. Repeat from step 7.
If you want to edit the destinations, select one
and press the Centre key or the Options soft
key. You can change or delete it.
12. To enter additional numbers or addresses to the
other destination types, press the Back soft
key or the C key and repeat steps 7 through 11.
You can enter up to 10 destinations each for To,
Cc, and Bcc.
13. When you have finished entering the
destinations, select Send message and press
the Centre key or the Select soft key.
Your phone sends the message.
80
Messages
SMS
Short Message Service (SMS) allows you to send
and receive short SMS messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to include simple pictures,
melodies, and animated images in your messages.
To use this feature, you must subscribe to your
service provider’s message service.
Creating a Simple SMS Message
1. Create your message.
Note: For further details about how to enter
characters, see page 34.
2. When you finish entering the message, press
the Options soft key. The following options are
available:
• Send only: allows you to send the message.
The message is deleted after sending.
• Save and send: allows you to save a copy of
the message and then send the message. You
can read the message in SMS Drafts box.
• Save only: allows you to save the message so
that it can be sent later. You can read the
message in the SMS Drafts box.
• For further details about SMS template,
Input method, Input language, Text
formatting, Add objects, Add contact, and
Add bookmark options, see page 82.
Note: To select the Send only option directly,
press the Centre key.
81
Messages
3. Select Send only or Save and send, and press
the Centre key or the Select soft key.
If you want to just save the message, select
Save only. After saving the message, the phone
returns to the Create message menu screen.
4. If you select a save option, choose the memory
location by pressing the Up and Down keys and
press the Centre key or the Ok soft key.
5. Enter a destination number and press the Centre
key or the Ok soft key.
The message is sent.
Creating a SMS Message Using Options
1. Create a message.
2. Press the Options soft key.
3. Select one of the following options by using the
Up or Down key and pressing the Centre key or
the Select soft key:
• SMS template: allows you to apply one of the
preset message templates to the text. Select
one of five messages stored in the SMS
templates menu. For further details, see
page 95.
• Input method: allows you to change the text
input mode.
• Input language: allows you to change the
language to be used in T9 input mode. Select
the language you want to use.
82
Messages
• Text formatting: allows you to format the
style of the text.
For the Size attribute, Normal, Large, and
Small sizes are available.
For the Bold, Italic, Underline, and
Strikethrough attributes, select On or Off.
These attributes can be combined.
• Add objects: allows you to add a sound,
melody, picture, or animated image to the
message. Select the category of the object to
be added. In each category, you can select
from the various factory-set items or choose
an item received from other sources, such as
the Internet or other phones.
• Add contact: allows you to add a Contacts
entry to your message. Select one from the
list.
• Add bookmark: allows you to add a web
page’s address stored in your Bookmarks list.
Select one from the list.
4. Complete the message, and send or save it by
following the procedure from step 2 on page 81.
Postcard
In this menu, you can send photos stored in the My
photos menu as a postcard along with a simple
greeting. Your message is sent to the MMS centre,
where it is formatted, printed and sent out as a real
postcard to the address of your choice.
Note: This feature may not be available, depending
on your country. Please contact your service
provider for further details.
83
Messages
1. Select the photo you want to send using the
Navigation keys and press the Centre key.
Note: Use a photo in maximum resolution.
You can also select one of the following options
by pressing the Options soft key:
• Select: selects the photo.
• View: displays the photo on the full screen. To
use the photo for sending a postcard, press
the Select soft key or the Centre key.
2. Enter a greeting message and press the Centre
key.
Note: For further details about how to enter
characters, see page 34.
3. Scroll to the field using the Up or Down key and
press the Centre key to enter the recipient
information.
The following options are available:
• Name: enter the recipient’s name.
• Additional information: enter any additional
personal information.
• Street: enter the house number and street.
• Zip & City: enter the zip or postal code.
• State/Province: enter the state or province.
• Country: enter the country. This option may
not be available, depending on your country.
Note: If you do not enter the name, street, and
zip code, your postcard cannot be sent.
84
Messages
4. When you have finished, press the Options soft
key.
The following options are available:
• Send: sends the postcard.
• Save: saves the postcard in the Postcard
folder in the Drafts box.
Note: You can also select a name from among
your Contacts by selecting the Contacts
list option. To send the message later,
select Save. The message will be saved
in the Draft box.
5. Select Send to send the message and press the
Centre key or the Select soft key.
Inbox
In this menu, you can access received messages.
MMS
Viewing a Message When You Receive it
When a new MMS message comes in, the display
shows the MMS Message icon (
) and a text
notification along with the sender’s number.
1. Press the Centre key to view brief information
about the message, such as the sender’s
number, the message size and the subject.
If you want to view the message later in the
Inbox, press the Exit soft key or the C key.
85
Messages
2. To scroll through the message information, press
the Up or Down key.
You can use the following options by pressing
the Options soft key:
• View: shows the information about message.
• Retrieve: retrieves the message from the
MMS server.
• Delete: deletes the message.
• properties: shows you detailed information
about the message.
Note: If the Auto download option in the MMS
settings menu is switched on, your phone
automatically retrieves new messages from
the server. You can then immediately view
the new messages by pressing the View
soft key. See page 99 for more about the
option.
3. To read the message, press the Centre key.
Your phone retrieves the message contents from
the server and displays it.
4. To scroll through the message, press the Up or
Down key.
5. When you have finished, press the
86
key.
Messages
Viewing a Message from the Inbox
When you access the Inbox menu, the list of MMS
messages you have received displays along with the
message subjects. The icons on the left tell you the
status of the messages:
•
: MMS notifications that have been opened.
•
: MMS notifications that have not been
opened.
•
: You have sent an enquiry to the MMS server
requesting the message be sent to your
phone.
•
: The MMS server is processing your request.
•
: The MMS server is unable to send the
message to your phone.
•
: Messages that have been opened.
•
: Messages that have not been opened.
1. Select a message on the list and press the
Centre key.
The message displays and scrolls to the next
page, if it has one, after a specified time.
2. Press the Centre key or the Ok soft key to go to
the message view screen.
Or, the display automatically switches to the
screen after a few seconds.
3. To scroll through the message, press the Up or
Down key.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
4. Press the
or
next message.
key to scroll to the previous or
87
Messages
While viewing a message, you can choose the
Message options by pressing the Centre key or the
Options soft key.
If you are viewing a new message, the options are
the same as when you view a message at the time of
its receipt. See page 86.
When you are reviewing a message retrieved from
the MMS server, the following options are available:
View: shows the message.
Reply: allows you to reply to the sender.
Reply all: allows you to send a reply to the sender
and all of the other recipients.
Delete: deletes the message.
Call sender: allows you to call the sender.
Extract...: allows you to extract the sender’s number
or e-mail address and URL, e-mail addresses, or
phone numbers from the message text.
Forward: allows you to forward the message to
another person.
Save picture: allows you to save an image from the
message into the Pictures folder.
Save sound: allows you to save a sound from the
message into the Sounds folder.
Properties: shows you detailed information about
the message.
88
Messages
SMS
This message box is used to store messages that
you have received.
When you enter this menu, the list of messages in
the box displays with the senders’ phone numbers
or names, if available in your Contacts.
You can use the following options by pressing the
Options soft key:
View: shows the message contents.
Delete: deletes the message.
1. Select a message from the list and press the
Centre key.
2. To scroll through the message, press the Up or
Down key.
3. On the message screen, you can scroll to the
previous or next message, press the
or
key.
While viewing a message, you can choose the
following options by pressing the Options soft key:
Reply: allows you to send a reply to the sender.
Delete: deletes the message.
Forward: allows you to forward the message to
another person. when the message contains media
contents, this option is not available.
89
Messages
Call sender: allows you to call the sender back.
Extract...: allows you to extract the sender’s
number and URL, e-mail addresses, or phone
numbers from the message text.
Move to phone: allows you to move the message
from the SIM card to the phone’s memory. This
option is only available when you select a message
stored in the SIM card.
Move to SIM: allows you to move the message
from the phone memory to the SIM card. This
option is only available when you select a message
stored in the phone’s memory.
Select objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can use the objects when writing a
message. For details, see page 83.
My messages
In this menu, you can access messages you sent or
saved for later retrieval. You can also cell broadcast
messages from your service provider.
Drafts
This menu stores MMS messages and postcards you
saved as a Draft or SMS message you saved and/or
sent. When you press the
key while creating a
message, you can also select to save the message
in this box.
90
Messages
MMS Drafts
When you select this menu, the list of the MMS
messages appears.
Scroll to the message you want to view and press
the Centre key.
While viewing the message, you can use the
following options by pressing the Options soft key:
Send: allows you to send the message.
Edit: allows you to change the message.
Delete: allows you to delete the message.
Extract...: extracts the destination numbers or
addresses of the message and the URL, e-mail
addresses, and phone number from the message
text.
Properties: shows the information about the
message.
SMS Drafts
When you select this menu, the list of the SMS
messages you sent and/or saved appears.
You can use the following options by pressing the
Options soft key:
View: shows the message contents.
Delete: deletes the message.
Scroll to the message you want to view and press
the Centre key.
While viewing the message, you can use the
following options by pressing the Options soft key.
Edit: allows you to edit the message.
Delete: allows you to delete the message.
91
Messages
Extract...: extracts the destination numbers or
addresses of the message and the URL, e-mail
addresses, and phone number from the message
text.
Move to phone: allows you to move the message
from the SIM card to the phone memory. This
option is only available when you select a message
stored in the SIM card.
Move to SIM: allows you to move the message
from the phone memory to the SIM card. This
option is only available when you select a message
stored in the phone’s memory.
Select objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can use the objects when writing a
message. For details, see page 83.
Postcard
When you select this menu, the list of the postcards
you saved appears.
Scroll to the message you want to view and press
the Centre key.
While viewing the message, you can use the
following options by pressing the Options soft key.
Send: allows you to send the postcard.
Edit: allows you to change the postcard.
Delete: allows you to delete the postcard.
Properties: shows detailed information about the
postcard.
92
Messages
Outbox
In this menu, you can access the MMS messages
and postcards you sent.
MMS
When you access this menu, the list of the MMS
messages that you have sent or saved displays. The
icons on the left tell you the status of the messages.
•
: Messages currently being sent
•
: Messages sent
•
: Messages your phone couldn’t send
•
: Messages to be sent
•
: Messages deferred
Select a message on the list and press the Centre
key.
You can use the following options by pressing the
Options soft key:
Delete: deletes the message.
Send: allows you to send/resend the message.
Edit: allows you to change the message contents,
sound, picture, or text.
Extract...: allows you to extract the destination
numbers or e-mail addresses and URL, e-mail
addresses, or phone numbers from the message
text.
Properties: shows you detailed information about
the message.
93
Messages
Postcard
When you access this menu, the list of the
postcards you sent displays.
Select a message on the list and press the Centre
key.
You can use the following options by pressing the
Options soft key:
Delete: allows you to delete the postcard.
Send: allows you to send the postcard.
Edit: allows you to change the postcard.
Properties: shows detailed information about the
postcard.
Templates
In this menu, you can use message templates to
easily and quickly create a new message.
MMS templates
This menu stores messages you saved as templates
so that you can use them to make new messages.
Your phone has three preset message templates.
Scroll through the template list using the Up or
Down key. When the message template you want
highlights, press the Centre key.
Press the Centre key or the Ok soft key to use the
following options, or the display automatically
shows the options after a specified time:
94
Messages
View: shows the message contents.
Edit: allows you to change the message template
and then send it.
Delete: allows you to delete the message template.
You are asked to confirm the deletion by pressing
the Centre key or the Yes soft key.
SMS templates
Using this menu, you can preset a maximum of five
messages that you use most frequently.
Select an empty location or the message template
you want and press the Centre key to enter a new
message.
Once you have preset a message template, you can
use the following options by pressing the Options
soft key:
Edit: allows you to write a new message or edit the
message template.
Note: For further details about how to enter
characters, see page 34.
Send: allows you to retrieve the message template.
Once you have completed the message, you can
send, save and send, or simply save it. For further
details about how to send a message, see page 76.
Delete: allows you to delete the message template.
You are asked to confirm the deletion by pressing
the Centre key or the Yes soft key.
95
Messages
Cell broadcast
This network service allows you to receive SMS
messages on various topics, such as the weather or
traffic. Cell Broadcast (CB) messages display as
soon as they are received, provided that:
• the phone is in Idle mode.
• the Receive option is set to Enable.
• the message channel is currently active on the
channel list.
The following options are available:
Read: lets you view the received message. The
Volatile box displays messages from the network,
but loses its contents as soon as the phone is
switched off. Scroll through the message by using
the Up and Down keys.
You can save a CB message in the Archive box for
later retrieval. When a text notification appears,
press the Centre key or the Options soft key and
select Save.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel list: allows you to indicate the channels
from which you wish to receive broadcast
messages.
96
Messages
The following options are available:
Select: use to enable or disable channels on the list
by marking or unmarking them, respectively. A
check mark displays in front of each selected
channel.
Add channel: use to enter the ID and title for a new
channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an existing
channel.
Language: allows you to select your preferred
language in which to display cell broadcast
messages.
Please contact your service provider for further
details.
Call voicemail
This menu allows you to access your voice mailbox,
if your network supports this service.
The following options are available:
Connect to voice server: before using the Voice
mail feature, you must enter the voice server
number obtained from your service provider. You
can then select this option and press the Centre key
or the Ok soft key to listen to your messages.
You can quickly connect to the voice server by
pressing and holding the 1 key in Idle mode.
97
Messages
Voice server number: allows you to change the
voice mail server number, if necessary.
Note: Voice mail is a network feature. Please contact
your service provider for further details.
live! Studio*
From this menu, you can access the live! Studio.
Your online media album allows you to store your
photos and compose MMS messages. You can also
access Vodafone content and message templates.
Please contact your service provider for more
information.
Push messages
In this menu, you can receive and access web
messages from the server.
The following options are available:
Inbox: allows you to read the messages received
from the web server.
Receive: allows you to set whether or not your
phone receives web messages. Select Always to
receive web messages or Never to reject web
messages.
Delete all: allows you to delete all of the web
messages.
*In other countries it is called Media Album.
98
Messages
Message settings
In this menu, you can change the various setting
for the Message feature.
MMS settings
You can change the default settings for sending or
receiving multimedia messages.
The following options are available:
Delivery report: when this option is enabled, the
network informs you whether or not your message
has been delivered.
Read reply: when this option is enabled, your
phone sends a request for a reply along with your
message to the recipient.
Auto download: you can set whether or not your
phone retrieves new incoming messages from the
MMS server without notifications.
Off: you need to manually download new messages
by using the Retrieve option.
On: the phone automatically retrieves new
messages from the server. As soon as you receive a
message you can use more options while you are
reading. See page 88 for details about the options.
Off when roaming: the phone automatically
downloads new messages unless you are roaming
on another network or in another country.
99
Messages
Message acceptance: you can specify the
category of messages you want to receive.
Hide ID: when this option is enabled, your phone
number does not display on the recipient’s phone.
Expiry period: you can select the length of time
your messages are stored at the message centre
after they are sent.
Delivery time: you can set a delay time before the
phone sends your messages.
Priority: you can select the priority level of your
messages.
Report allowed: when this option is enabled, the
sender of an incoming message receives a delivery
report from the network.
Page duration: you can set how long one page of
an outgoing message displays on the message
presentation screen. After a specified time, the
display automatically scrolls to the next page.
MMS profiles
In this menu, you can configure various network
settings that are required when you send or receive
MMS messages.
Notes:
• The last profile you accessed is automatically
activated for sending messages.
• If you change the MMS settings without first
checking with your service provider, the MMS feature
may not work properly.
The following options are available for each profile:
Profile name: enter a name that you wish to
assign to the MMS server.
100
Messages
Connection URL: enter the address of your MMS
server.
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-secure.
IP address: enter the gateway address required to
connect to the MMS server.
User name: enter the user ID required to connect
to the MMS server.
Password: enter the password required to connect
to the MMS server.
APN: enter the access point name used for the
address of the MMS server.
For further details, contact your service provider.
SMS settings
In this menu, you can set up default SMS/EMS
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card.
Notes:
• The setting options available in this menu may be
different, depending on your service provider.
• The last setting you accessed is automatically
activated for sending messages.
Setting x (where x is the setting group number):
each group has its own sub-menu.
101
Messages
Setting name: allows you to give a name to the
setting group currently being defined.
Service centre: allows you to store or change the
number of your message centre, which is required
when sending messages. You must obtain this
number from your service provider.
Default destination: allows you to store the default
destination number. The number automatically
displays on the Destination screen when you create
a message.
Default type: allows you to set the default message
type to Text, Fax, E-mail, or Paging. The network
can convert the messages into the selected format.
Validity period: allows you to set the length of time
your text messages are stored in the message
centre while attempts are made to deliver them.
Common settings: The following options are
available:
Reply path: allows the recipient of your message to
send you a reply through your message centre, if
your network supports this service.
Delivery reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Bearer selection: allows you to choose either GSM
or GPRS, depending on your network.
102
Messages
Character support: allows you to choose a character
type from GSM-alphabet, Uni-code, or
Automatic. If you select Uni-code and your
recipient’s phone does not support it, your recipient
may not be able to read your message.
Memory status
You can check the amount of memory being used
and the amount remaining for messages.
The following options are available:
MMS: shows the total space, including the free and
used space, and how much space is currently
occupied by each message box. Press the Up or
Down key to scroll through the screen.
SMS: shows the number of messages currently
stored and the total number of messages you can
store in the SIM, Phone, and CB memories.
Delete all
This menu allows you to delete all of the messages
in each message box separately. You can also delete
all of your messages at one time.
1. Select a message type and press the Centre key
or the Select soft key.
103
Messages
2.
To
Press the
select a message
box to clear
Up or Down key. To
delete all of your
messages, select All
messages.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
3. Press the Centre key to delete the marked
messages.
4. When a confirmation message displays, press
the Centre key or the Yes soft key to confirm.
5. When the phone asks for confirmation again,
press the Centre key or the Yes soft key.
104
Camera
Using the camera module embedded in your phone,
you can take photos of people or events while on
the move. Additionally, you can send photos to
other people in a multimedia message or set one as
wallpaper or as a caller ID image for a Contacts
entry.
You can also record videos using the phone as a
camcorder.
Note: You can quickly access the Camera menu by
pressing the Camera key ( ) on the right side
of the phone in Idle mode.
CAUTION:
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are not
allowed.
• Do not take photos in a place where you may
interfere with other person’s privacy.
Take photo
This menu allows you to take photos. Your camera
produces JPEG pictures.
You can take photos with the slider pushed up.
Note: When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
1. Accessing the Take photo menu turns on the
camera on the top left of the phone.
105
Camera
Alternatively, you can press and hold the
Camera ( ) key on the right side of the phone
in Idle mode.
The image to be captured appears on the
display.
2. Adjust the image by aiming the camera at the
subject.
3. To
Press the
flip the image
vertically
key.
flip the image
horizontally
key.
zoom in or out
Up or Down key.
adjust the brightness
Left or Right key.
use the options
left soft key.
For details, see
page 107.
4. Press the Centre key or the Camera key to take
the photo.
106
Camera
5. Press the Centre key or the Save soft key.
To discard the photo, press the Cancel soft key.
6. To
Press the
use the photo options Centre key or the
Options soft key. For
details, see page 110.
return to Capture
mode
Back soft key.
return to Idle mode
key.
Using the Camera Options
In Capture mode, you can use various options for
the camera by pressing the left soft key.
The following options are available:
Effects: allows you to change the colour tone or
apply a special effect to the photo.
Frames: allows you to use a decorated frame.
Select a frame from the list using the Navigation
keys.
Multi shot: allows you to take a series of action
stills. Select the capture speed, High speed or
Normal speed, and the number of photos the
camera will take. When you press the Centre key or
the Camera key, the camera takes photos
successively.
After taking photos, press the SaveAll soft key or
the Centre key. You can save all of the photos in a
separate folder.
Rotation: allows you to rotate the photo. You can
flip the photo vertically, see its mirror image, or do
both at the same time
107
Camera
Self timer: allows you to set a time delay before
the camera takes the photo. Select the length of
delay you want. When you press the Centre key or
the Camera key, the camera takes the photo after
the specified time.
Settings: allows you to change the image settings.
Photo size: sets the image size to either
VGA(640x480), QVGA(320x240),
QQVGA(160x120), or Mobile(128x120). The
selected image size displays on the top of the
capture screen.
Photo quality: allows you to select the image quality
from Economy, Normal, Fine, and Super fine.
The selected quality displays on the top of the
capture screen.
Flash light: allows you to select the flash light
option between Auto and Manual. When you select
Manual, press the 0 key to use the flash light and
press the 0 key again to deactivate.
Using the Number Keys in Capture Mode
You can use the number keys to customise your
camera settings when you are in Capture mode.
key
108
Function
1
switches to Record mode. See page 109.
2
changes the image size.
3
changes the image quality
4
changes the camera mode.
5
changes the colour tone or applies special
effects to the photo.
Camera
key
Function
6
removes the white line or spots on the
display.
7
uses a frame.
8
sets the timer.
9
switches to the My photos menu.
Record video
You can record a video using your phone as a
camcorder. You can record up to five videos,
regardless their length.
1. When the camera turns on, adjust the image by
aiming the camera at the subject.
2. To
Press the
flip the image vertically
key.
flip the image
horizontally
key.
zoom in or out
Up or Down key.
adjust the brightness
Left or Right key.
switch to Capture mode
1 key. For details,
see page 108.
flash on/off
0 key. For details,
see page 108.
3. Press the left soft key, the Centre key, or the
Camera key to start recording.
109
Camera
4. When you have finished, press the left soft key,
the Centre key, or the Camera key.
The phone automatically stops when the
recording time expires.
5. Press the Centre key or the Save soft key. The
video is saved and the display returns to Record
mode.
To discard the video, press the Cancel soft key.
My photos
This menu allows you to review your photos.
When you access this menu, your phone displays
the photos in Thumbnail mode, which shows them
as small images. Use the Navigation keys to scroll
through the photos.
To view the photos on the full screen, press the
Centre key. To go back to Thumbnail mode, press
the Back soft key or the C key.
Press the Options soft key to use the following
options:
View: displays the photo on the full screen. This
option is shown only in Thumbnail mode.
Send MMS: allows you to send the photo to other
people as part of a MMS message. For further
details, see page 77.
Send live! Studio: allows you to send the photo to
the server of the live! Studio using the MMS.
Rename: allows you to change the name of the
photo.
110
Camera
Set as wallpaper: allows you to set the photo as
your wallpaper on the idle screen.
Set as caller ID: allows you to set the photo as a
caller ID image for a Contacts entry.
Protection: allows you to protect the photo from
being deleted.
Delete: allows you to delete the photo.
Delete all: allows you to delete all of the photos
saved in your phone.
Properties: shows the properties of the photo,
such as the time and date it was taken, file size,
photo size, protection status, file format, and file
name.
My videos
When you access this menu, the thumbnail images
of your videos display.
To play a video:
1. Press the Navigation keys to scroll to the video
you want to review.
2. Press the Centre key to start playing the video.
3. To
Press the
pause the playing
Pause soft key.
resume
Continue soft key.
stop
Stop soft key or the C
key.
return to Idle mode
key.
111
Camera
Press the Options soft key on the video list to use
the following options:
Play: plays the video.
Rename: allows you to change the name of the
video.
Delete: allows you to delete the current video.
Delete all: allows you to delete all of your videos.
Protection: allows you to protect the video from
being deleted.
Properties: shows the properties of the video,
such as the time and date it was recorded, file size,
protection status, and playing time.
112
My items
This menu allows you to access:
• games, pictures, and sounds you downloaded
from the Wireless Web.
• photos and videos you captured by using the
camera.
• message templates you saved while using the
Message feature.
Pictures
In this menu, you can view the photos you took
using your phone. You can also access the images
you have downloaded or access a web site to
download new images.
My photos
You can access the photos you have taken using the
camera.
For further details about viewing a photo and using
the options, see page 110.
Saved pictures
You can view the list of images downloaded from a
web server or received in messages.
Scroll to the image you want to view and press the
Centre key.
By pressing the Options soft key, you can use the
following options:
View: displays the image.
Send MMS: allows you to send the image in an
MMS message. For details, see page 77
113
My items
Send live! Studio: allows you to upload ths image
into the server.
Rename: allows you to change the name of the
image.
Delete: deletes the image.
Set as wallpaper: sets the image as your
wallpaper for the idle screen.
Download more
Selecting this menu loads the web site preset by
your service provider so that you can download
more pictures or animated images.
Games
In this menu, you can access Java games you
downloaded from the web or access a web site to
download new games.
Saved games
You can view the list of games downloaded from a
web server.
Scroll to the game you want and press the Centre
key. For further details for playing a game, see
page 56.
Download more
Selecting this menu loads the web site preset by
your service provider so that you can download
more games.
114
My items
Sounds
In this menu, you can listen to the sounds you
recorded. You can also access sounds you have
downloaded from the web or access a web site to
download new sounds.
My sounds
You can view the list of the sounds you recorded by
using the Voice recorder menu.
For further details about listening a sound and using
the options, see page 74.
Saved sounds
You can view the list of sounds downloaded from a
web server or received in MMS messages.
Scroll to the sound you want to listen to and press
the Centre key.
By pressing the Options soft key, you can use the
following options:
Play: plays the sound.
Send MMS: allows you to send the sound as an
MMS message.
Rename: allows you to change the name of the
sound.
Delete: deletes the sound.
Set as ringtone: sets the sound as your ring tone.
Download more
Selecting this menu loads the web site preset by
your service provider so that you can download
115
more ring tones or melodies.
My items
My videos
In this menu, you can access the videos you
recorded by using the camera.
For further details about playing a video and using
the options, see page 111.
Templates
In this menu, you can access the message
templates you made while using the SMS or MMS
message feature.
For further details about viewing a template and
using the options, see page 94.
Memory status
You can check the amount of the memory being
used and the memory remaining for games or
sounds and images. Press the Up or Down key to
scroll through the screen.
The following options are available:
Games: the display shows the total, free, and used
space and the number of games you downloaded.
Sounds & images: the display shows the total,
free, and used space, including each space used for
sounds and images.
Photos & videos: the displays shows the total
space, including free, and used space for photos
and videos.
116
Calendar
With the Calendar feature, you can:
• consult the calendar and check your memos.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder.
Consulting the Calendar
When you select the Calendar menu, the calendar
displays with today’s date highlighted.
The following options are available when you press
the Options soft key:
Go to date: allows you to go to a specific date.
Search all: displays all of the memos, starting with
the oldest regardless of the day. To scroll through
the memos, press the Up or Down key.
Delete all: allows you to delete all of the memos.
You are asked to confirm your action.
Writing a Memo
You can make up to 30 memos for one day.
To write or edit a memo on a specific date:
1. Select a date on the calendar by using the
Navigation keys.
Note: To skip to the previous or next month,
press the Volume keys on the left side of
the phone.
117
Calendar
2. Press the Centre key.
An empty memo screen displays allowing you to
enter your memo.
3. Enter your memo and then press the Centre key
or the Ok soft key.
Note: For further details about how to enter
characters, see page 34.
You are asked if you wish to set an alarm.
4. If you want an alarm to ring on the chosen day,
press the Centre key.
Otherwise, press the Skip soft key. The memo is
saved.
5. If you pressed the Centre key, enter the time for
the alarm and press the Centre key.
Note: Your phone is preset to a 24-hour format.
To change the format, see page 151.
You can access following options by pressing the
Options soft key:
• Set alarm: sets the alarm.
• Melody: allows you to select a melody for the
alarm.
6. If applicable, select AM or PM and press the
Centre key or the Select soft key.
The colour of the date on the calendar changes
to green to indicate that a memo exists for that
date.
When the alarm time for a memo expires and the
phone sounds the selected alarm melody, press the
Centre key or the View soft key to view the memo.
Alternatively, press the Exit soft key or the
key to stop the alarm.
118
Calendar
Viewing a Memo
When you select a day on which more than one
memo exists, the latest memo for the day displays.
In that case, press the Up or Down key to scroll to
the previous or next memo.
You can use the following options by pressing the
Options soft key:
Edit: allows you to change the memo text.
Add new: allows you to write a new memo.
Alarm: allows you to set an alarm to ring at a
specified time to remind you of the memo. If you
have already set an alarm for that memo, you can
change or delete the alarm.
Delete: allows you to delete the memo.
Duplicate: allows you to duplicate the memo to
another date.
Change date: allows you to change the date of the
memo.
Note: To select the Edit option directly, press the
Centre key.
119
Contacts
You can store phone numbers of contact persons
and their corresponding names in both your SIM
card and your phone’s memory. They are physically
separate but are used as a single entity, called
Contacts.
Note: Depending on your particular SIM card, the
maximum number of phone numbers the SIM
card can store may differ.
Contacts list
In this menu, you can access the Contacts list and
search for Contacts entries by entering names.
1. Enter the first few letters of the name that you
want to find.
The Contacts entries are listed, starting with the
first entry matching your input.
2. To
120
Press the
view the highlighted
entry
Centre key or the View
soft key.
select a different
entry
Up or Down key until
the entry you want
highlights.
look for a name
starting with a
different letter
key labelled with the
letter you want.
Contacts
3. Once you have found the entry, press the Centre
key or the
key to dial the number.
Alternatively, press the Options soft key to
access the Contacts entry options; for further
details, see the following page.
Using Contacts Entry Options
While accessing any Contacts entry, press the
Options soft key to access the options for the
entry.
The following options are available:
Call: make a call to the selected contact person.
Edit: allows you to edit the name and/or number.
Select Name and contact to change the name
and/or phone number for the selected entry. If you
change the name, the number is saved separately
with the new name.
Select Name only to change only the name of the
entry.
Add entry: allows you to add a new number to the
currently selected name.
Photo caller ID: allows you to assign one of the
photos you took using the camera as a caller ID
image to be displayed when you receive a call from
the selected number. For details about the Camera
feature, see page 105.
Take photo: allows you to take a new photo to be
used as a caller ID.
Select photos: allows you to select a photo for the
number.
121
Contacts
View: displays the photo assigned to the number.
Delete caller ID: cancels the photo caller ID setting
for the number.
Paste: allows you to paste the number into the
normal dialling mode. Use this option to dial a
number similar to one in Contacts, such as a
different extension in the same office.
Use the C key or the Clear soft key to change the
number as required. When you are ready to dial,
press the
key.
Delete: allows you to delete the selected number
from Contacts. You are asked to confirm that you
wish to delete the name and number by pressing
the Centre key or the Yes soft key.
Copy: allows you to copy the number to another
location. You can select the memory location, either
SIM or Phone, and the location number.
Caller group: allows you to organise your Contacts
entries in caller groups so that the phone alerts you
in a specific way when a person from one of your
groups calls you. Select one of the ten groups
available.
To remove an entry from a group, select the No
group option.
For further details about how to change caller group
properties, see page 125.
Send MMS: allows you to send an MMS message to
the person. For details, see page 76.
Send SMS: allows you to send an SMS message to
the person. For details, see page 81.
Send postcard: allows you to send a postcard to
the person. For details, see page 83.
122
Contacts
Create contact
This menu allows you to add a new entry to the
Contacts list.
1. Select an icon to identify the category of the
number to be stored by pressing the Left or
Right key, and press the Centre key or the
Select soft key.
Note: The E-mail icon (
) is available in this
step. It allows you to save an e-mail
address instead of a phone number.
2. Select a memory location, either SIM or Phone,
by pressing the Up or Down key and press the
Centre key or the Select soft key.
Note: When you are saving an e-mail address,
SIM is not available.
3. Enter a name and press the Centre key or the
Ok soft key.
For further details about how to enter
characters, see page 34.
4. Enter the number or address you want to store
and press the Centre key or the Save soft key.
5. If you do not want to save the number and
name in the suggested location, press the C key
or the Clear soft key to clear the location
number and enter another location by pressing
the numeric keys.
6. Press the Centre key or the Ok soft key to store
the name and number.
After storing, the phone displays the Contacts
entry or name you just created.
123
Contacts
7. Once you have found the entry, press the Centre
key or the
key to dial the number.
Alternatively, press the Options soft key to
access the Contacts entry options; for further
details, see page 121.
Group search
You can search for Contacts entries by selecting a
caller group.
1. Enter the first few letters of the group name that
you want to find.
The caller groups are listed, starting with the
first group matching your input.
2. If necessary, scroll to a group by pressing the Up
or Down key and press the Centre key or the
View soft key.
The Contacts entries in the caller group are
listed.
3. To
Press the
view the highlighted
entry
Centre key or the View
soft key.
select a different
entry
Up or Down key until
the entry you want
highlights.
4. Once you have found the entry, press the Centre
key or the
key to dial the number.
Alternatively, press the Options soft key to
access the Contacts entry options; for further
details, see page 121.
124
Contacts
Group edit
In this menu, you can change the properties of each
caller group.
1. Scroll through the group list by pressing the Up
or Down key.
2. When the group you want highlights, press the
Options soft key.
3. Select each option and change the settings, as
you want. The following options are available:
• Call ringtone: allows you to set a ring tone to
be used when you receive a voice call from a
member of that group.
• SMS tone: allows you to set a ring tone to be
used when you receive a message from a
member of that group.
• Graphic: allows you to set a graphic icon to be
displayed when you receive a voice call from a
member of that group.
• Group name: allows you to assign a name to
the group. For further details about how to
enter characters, see page 34.
Note: To select the Call ringtone option directly,
press the Centre key.
4. After changing the settings, press the Centre
key, the Select key, or the Ok soft key.
125
Contacts
Call log
In this menu, you can view the:
• calls you missed, received, or dialled.
• length of your calls.
• cost of your calls, if your SIM card supports it.
Notes:
• You can access the numbers in the three types of call
records by pressing the
key in Idle mode.
• The number of call records the phone can store may
vary, depending on your SIM card.
Missed calls
This menu lets you view the 20 most recent calls
you received, but did not answer.
The number or name, if available, displays together
with the time and date the call was received.
Pressing the Centre key allows you to change the
number to save or dial it.
By pressing the Options soft key, you can use the
following options:
View: shows the number of the call log. You can
edit the number, if necessary, and dial it or save it
in Contacts.
Delete: deletes the call log from the list.
You can also dial the number by pressing the
key.
126
Contacts
Received calls
This menu lets you view the 20 most recent calls
you received.
The number or name, if available, displays together
with the time and date the call was received.
Pressing the Centre key allows you to change the
number to save or dial it.
By pressing the Options soft key, you can use the
following options:
View: shows the number of the call log. You can
edit the number, if necessary, and dial it or save it
in Contacts.
Delete: deletes the call log from the list.
You can also dial the number by pressing the
key.
Dialled calls
This menu lets you view the 20 most recent calls
you dialled.
The number or name, if available, displays together
with the time and date the call was made. Pressing
the Centre key allows you to change the number to
save or dial it.
By pressing the Options soft key, you can use the
following options:
View: shows the number of the call log. You can
edit the number, if necessary, and dial it or save it
in Contacts.
Delete: deletes the call log from the list.
You can also dial the number by pressing the
key.
127
Contacts
Delete all
This menu allows you to delete all of the records in
each call record separately. You can also delete all
of your call logs at one time.
1. Scroll to the call type to be deleted and press
the Mark soft key to place a check.
You can remove the check mark by pressing the
Unmark soft key again.
2. If necessary, repeat step 1.
3. Press the Centre soft key to delete the marked
types.
4. When a confirmation message displays, press
the Centre key or the Yes soft key to confirm.
5. When the phone asks for confirmation again,
press the Centre key or the Yes soft key.
Call time
This menu lets you view the timers for calls you
made and received.
Note: The actual time invoiced by your service
provider may vary, depending on network
features, rounding-off for billing purposes, and
so on.
The following timers are available:
Last call time: length of the last call.
Total sent: total length of all calls you made since
the timer was last reset.
Total received: total length of all calls you
received since the timer was last reset.
128
Contacts
Reset timers: option used to reset the call timers.
You must first enter the phone password and then
press the Centre key or the Ok soft key.
Note: The password is preset to “00000000.” To
change this password, see page 154.
Call costs
This network feature lets you view the cost of calls.
This menu may not be available depending on your
SIM card.
The following options are available:
Last call cost: cost of the last call you made.
Total cost: total cost of all calls you made since
the cost counter was last reset. If the total cost
exceeds the maximum cost set in the Set max cost
option, you can no longer make any calls until you
reset the counter.
Max cost: maximum cost set in the Set max cost
option. See below.
Reset counters: option used to reset the cost
counter. You must first enter your PIN2 (see
page 162) and then press the Centre key or the Ok
soft key.
Set max cost: option used to enter the maximum
cost that you authorise for your calls. You must first
enter your PIN2 (see page 162) and then press the
Centre key or the Ok soft key.
Price/unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 162) and then press the Centre key or
the Ok soft key.
129
Contacts
Data counter
This menu allows you to view and check the amount
of data (Byte, KB, MB, GB) sent and received during
GPRS connections.
The following options are available:
Last sent data: amount of the data you last
sent.
Last received data: amount of data you last
received.
Total sent data: total amount of data you have
sent since the data counter was last reset.
Total received data: total amount of data you
have received since the data counter was last
reset.
Reset counters: option used to reset the data
counter. You must first enter your phone
password and then press the Ok soft key or the
Centre key.
Speed dial list
Once you have stored phone numbers in Contacts,
you can set up to eight speed-dial entries and then
dial them easily whenever you want, simply by
pressing the associated numeric key.
To set up the Speed dial list:
1. Select the key to which you wish to assign the
speed-dialling number, from the 2 to 9 keys,
and press the Centre key or the Select soft key.
Note: Memory location 1 is reserved for your Voice
mail server number.
130
Contacts
If you have already assigned a number to the
key, the Options soft key replaces the Select
soft key.
2. Select an entry from the Contacts list and press
the Centre key or the View soft key.
3. Select a number, if the entry has more than one,
by pressing the Up or Down key and press the
Centre key or the Select soft key.
Once you have assigned a number to the key, you
can use the following options by pressing the
Options soft key:
Change: allows you to assign a different number to
the key.
Delete: allows you to clear the setting so that no
number is assigned to the key.
Delete all: allows you to clear the settings for all
keys so that no numbers are assigned to any of the
keys.
Number: allows you to view the number assigned
to the key. You can dial the number by pressing the
key.
To speed-dial the numbers assigned to the 2 to 9
keys, press and hold the appropriate key in Idle
mode.
131
Contacts
My numbers
This function is a memory aid, which you can use to
check your own phone numbers if you need to do so.
You can:
• assign a name to each of the own phone numbers
registered on your SIM card.
• edit the names and numbers.
Any changes made here do not in any way affect
the actual subscriber numbers on your SIM card.
Memory status
You can check how many names and numbers are
stored in Contacts, in both the SIM card and the
phone’s memory. You can also see the capacity of
both memories.
Press the Up or Down key to view the number of
existing and total entries available in the SIM card
and the phone’s memory.
132
Settings
In this menu, you can customise various settings
related to your phone system, display, sounds, time
and date, network, and security.
Phone settings
Many different features of your phone can be
customised to suit your preferences.
Activate infrared
This feature allows you to send or receive data
through the infrared port. To use an infrared
connection, you must:
• configure and activate an IrDA-compliant infrared
port on your PC.
• activate the infrared feature on the phone; the
IrDA icon ( ) appears on the top line of the
display.
• align the IrDA port on the phone with the IrDA
port on your computer.
IrDA port
IrDA port
The connection is ready for data transmission.
133
Settings
If there is no communication between your phone
and the IrDA-compliant device within 30 seconds of
activating the feature, it is automatically
deactivated.
Note: For optional performance, use an optional PC
data link cable.
Greeting message
This menu allows you to set a greeting to be
displayed briefly when the phone is switched on.
For further details about how to enter characters,
see page 34.
Language
You can select a display language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
Note: Depending on your country, service provider, or
the software version of the phone, the
Automatic option may not display.
134
Settings
Shortcuts
The Navigation keys can be used as shortcut keys.
In Idle mode, they allow you to access specific
menus directly.
In this menu, you can change the shortcuts
assigned to the Navigation keys.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by
pressing the Up or Down key and press the
Centre key or the Select soft key.
2. Select the menu to be assigned to the key by
pressing the Up or Down key.
Note: To deactivate a shortcut key, select the
None option.
3. Press the Centre key or the Select soft key to
save the selection.
Extra settings
You can turn the automatic redialling or answering
features on or off.
To turn a feature
Press the
on
Mark soft key. A check
mark displays in front of the
option.
off
Unmark soft key. The
check mark no longer
displays.
135
Settings
The following options are available:
Auto redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
Note: The interval between two attempts varies.
Active slider: when this option is checked, you can
simply push the slider up to answer a call.
When it is unchecked, you must push the slider up
and press a key to answer a call, depending on the
setting of the Anykey answer option. See below.
Anykey answer: when this option is checked, you
can answer an incoming call by pressing any key,
except the
key and the Reject soft key. To
reject the call, press the
key or the Reject
soft key.
When this option is unchecked, you can only press
the
key or the Accept soft key.
Reset settings
You can easily reset your phone to its default
settings.
Enter the 4 to 8-digit phone password and press the
Centre key or the Ok soft key.
Note: The password is preset to “00000000.” To
change this password, see page 154.
136
Settings
Display settings
In this menu, you can change various settings for
the display or backlight.
Main display
This menu allows you to change the background
image or the colour of the text to be displayed in
Idle mode.
The following options are available:
Wallpaper: you can download images from the
wireless web site preset by your service provider, or
select a background image to be displayed on the
idle screen.
To change the background image:
1. Scroll through the list by pressing the Up or
Down key.
You have various preset images available. You
can also select a blank background, any photos
you took, or any images downloaded from the
Internet and the EasyGPRS programme, or
received in messages.
2. Press the Centre key or the Select soft key
when the image you want highlights.
3. When the image displays, press the Centre key
or the Select soft key to display it on the idle
screen.
Using the More pictures option, you can access
the web site preset by your service provider and
download new images.
137
Settings
Text display: you can specify whether or not the
phone displays the time and date on the idle
screen.
Text colour: you can select the colour of the text
to be displayed on the idle screen. This option is
available when the text display is enabled.
Menu style
This menu allows you to select the menu display
style. You can choose either Grid style, Bar style,
and Page style.
Back light
You can select the length of time the backlight is on.
The backlight turns on when you press a key, when
you push the slider up, or when you receive a call or
message, and remains on for the specified length of
time.
Service light
This menu allows you to select whether or not the
service light is used. It also allows you to select a
colour in which it flashes.
Select one of the five colour settings. When the
phone is ready for use, the service light flashes in
the chosen colour.
If you do not wish to use the service light,
select Off.
138
Settings
Graphic logo
This menu allows you to display your service
provider’s logo instead of its name.
Off: the service provider’s name displays in Idle
mode.
On: the service provider’s logo stored in your phone
displays in Idle mode; if no logo has been stored,
the service provider’s name displays.
Sound settings
You can change various sound settings.
Note: When the phone is in Silent mode (see
page 31), you cannot change the sound
settings.
Ringtone
This menu allows you to select a ring melody.
You can choose between many different melodies. If
you have downloaded sounds from the Internet or
the optional EasyGPRS programme, you can use
them in this menu.
Using the More sounds option, you can access the
web site preset by your service provider and
download new ring tones or melodies.
139
Settings
Ring volume
This menu allows you to adjust the ring volume to
one of five levels.
Use the Up and Down keys or the Volume keys on
the left side of the phone to increase or decrease
the volume.
Alert type
This menu allows you to specify how you are to be
informed of incoming calls.
The following options are available:
Light only: the service light flashes; the phone
neither rings nor vibrates.
Melody: the phone rings using the ring tone
selected in the Ringtone menu.
Vibration: the phone vibrates but does not ring.
Vibration+melody: the phone first vibrates three
times and then starts ringing.
Keypad tone
This menu allows you to select the tone that the
phone sounds when you press a key.
To turn the sound off, select Off.
140
Settings
Message tone
This menu allows you to select how the phone
informs you that a new message has been received.
SMS tone
The following options are available for alerting you
to new SMS messages:
Off: the phone does not use an SMS tone.
Light only: the service light flashes.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
SMS tone X: the phone uses one of several SMS
tones.
SMS-CB tone
The following options are available for alerting you
to new cell broadcast (CB) messages:
Off: the phone does not use a CB tone.
Light only: the service light flashes.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
SMS-CB tone X: the phone uses one of several CB
tones.
141
Settings
MMS tone
The following options are available for alerting you
to new MMS messages:
Off: the phone does not use an MMS tone.
Light only: the service light flashes.
Vibration: the phone vibrates.
Single beep: the phone beeps once.
MMS tone X: the phone uses one of several MMS
tones.
Repetition
This menu allows you to specify how often the
phone informs you of a new message. The following
options are available:
Once: the phone alerts you once.
Periodic: the phone alerts you every 2 minutes.
Slider tone
This menu allows you to select the tone that the
phone sounds when you open or push the slider
down. Select either Future or Crystal.
To turn the sound off, select Off.
Power on/off
This menu allows you to select the melody that the
phone sounds when it is switched on or off. Select
either Classical or Cheerful.
To turn the sound off, select Off.
142
Settings
Alert on call
This menu allows you to set whether or not the
phone informs you when you receive a new
message or when the time for an alarm comes
during a call.
The following options are available:
Off: the phone doesn’t alert you to incoming
messages or alarms. It only displays the
corresponding notification.
On: the phone alerts you with a beep. The alert
occurs only in your earpiece, so the person with
whom you are talking doesn’t hear it.
Extra tones
You can customise additional tones for the phone.
To turn a given
tone
Press the
on
Mark soft key. A check mark
displays in front of the option.
off
Unmark soft key. The check
mark no longer displays.
The following options are available:
Error tone: sets whether or not the phone informs
you when you make a mistake.
Minute minder: sets whether or not the phone
beeps every minute during an outgoing call to keep
you informed of the length of your call.
Connect tone: sets whether or not your phone
beeps when your call is connected to the system.
143
Settings
Call settings
These menu functions are network services. Please
contact your service provider to check their
availability and subscribe to them, if you wish.
Call diverting
This network service enables incoming calls to be
rerouted to a number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holidays.
To set your call diverting options:
1. Select a call diverting option by pressing the Up
or Down key, and then press the Centre key or
the Select soft key.
The following options are available:
• Divert always: all calls are diverted.
• Busy: calls are diverted when you are already
on another call.
• No reply: calls are diverted when you do not
answer the phone.
• Unreachable: calls are diverted when you are
not in an area covered by your service
provider or when your phone is switched off.
• Cancel all: all call diverting options are
cancelled.
2. Select the type of calls, voice or data, by
pressing the Up or Down key, and then press the
Centre key or the Select soft key.
The current status displays. If the option has
already been set, the number to which the calls
are diverted displays.
144
Settings
3. If you selected No reply in step 1, select the
length of time the network waits before diverting
a call and press the Centre key or the Select
soft key.
4.
To
Press the
activate call
diverting
Centre key or the
Activate soft key. Go to
step 5.
change the number
to be called
Centre key or the
Change soft key. Go to
step 5.
deactivate call
diverting
Remove soft key.
5. Enter the number to which the calls are to be
diverted and press the Centre key or the Ok soft
key.
To enter an international code, press the 0 key
until the + sign displays.
The phone sends your settings to the network
and the network’s acknowledgement displays.
145
Settings
Call barring
The call barring network service allows you to
restrict your calls.
To set your call barring options:
1. Select a call barring option by pressing the Up or
Down key, and then press the Centre key or the
Select soft key.
The following options are available:
• All outgoing: calls cannot be made.
• International: international calls cannot be
made.
• International except home: when abroad,
calls can be made only to numbers within the
current country and to your home country,
which is the country where your home network
provider is located.
• All incoming: calls cannot be received.
• Incoming while abroad: calls cannot be
received when you are using your phone
outside of your home country.
• Cancel all: all call barring settings are
deactivated; calls can be made and received
normally.
• Change barring password: you can set and
change the call barring password obtained
from your service provider using this option.
2. Select the type of calls, voice or data, by
pressing the Up or Down key, and then press the
Centre key or the Select soft key.
3. Press the Activate soft key to confirm your
settings.
146
Settings
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
To deactivate specific call barring settings:
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option
applies.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
Call waiting
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for
voice calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which
you want to apply the call waiting option by
pressing the Up or Down key, and then press the
Centre key or the Select soft key.
The screen informs you whether call waiting is
activated or deactivated.
147
Settings
2. You can activate or deactivate the Call waiting
feature as necessary by using the Activate or
the Deactivate soft key respectively.
To return to the previous screen, press the Exit
soft key.
You can also deactivate all call waiting settings by
selecting the Cancel all option.
Caller ID
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to change
this setting.
The following options are available:
Default: the default setting provided by the
network is used.
Hide number: your number does not display on
the other person’s phone.
Send number: your number is sent each time you
make a call.
148
Settings
Closed user group
Closed User Group (CUG) is a network service
which allows incoming and outgoing calls to be
restricted to a selected user group. You can create
up to ten user groups.
For details about how to create and use a closed
user group, contact your service provider.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
Activating a Closed User Group
If you select the Closed user group menu, you
can enter the CUG function. You can now access the
following options after pressing the Centre key or
the Select soft key:
Index list: lets you list, add, or delete CUG index
numbers.
If there is no CUG index stored, you are prompted
to add a new index when you select this option.
Once you have added a CUG index, the list of
current CUG indexes appears.
149
Settings
Add a new CUG index as advised by your service
provider, or delete a group.
To
Press the
scroll through
existing CUG
indexes
Up or Down key.
add a new CUG
index
Options soft key, select the
Add option and enter the
index.
delete a CUG
index
Options soft key and select
the Delete option.
activate a CUG
index
Options soft key and select
the Activate option.
Outside access: lets you enable or disable calls to
numbers other than those in the Closed user group.
This feature depends on the nature of your CUG
subscription. Please check with your service
provider.
Default group: you may set a default CUG with
your service provider. If you have done so, you can
enable the Default group option on your phone.
When making a call, you are given the option of
using your default CUG, instead of selecting one
from the list.
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
150
Settings
Time & date
This menu allows you to change the current time
and date displayed. You can also find out what time
it is in another part of the world.
The following options are available:
Set time: allows you to enter the current time. You
can choose the time format in the Time format
menu.
Note: Before setting the time, you must specify your
time zone in the World time menu. See
below.
Set date: allows you to enter the day, month, and
year.
World time: allows you to find out what time it is
in another part of the world, using the Left or Right
key.
The screen shows the city name and the current
time and date.
To select your time zone:
1. Select the city corresponding to your time zone
by pressing the Left or Right key one or more
times.
The local time and date display.
2. Press the Centre key or the Set soft key.
Time format: allows you to change the time
format to 12 hours or 24 hours.
Display options: allows you to set whether the
phone displays the time or the date on the menu
title bars.
151
Settings
Network selection
The Network selection feature enables you to
automatically or manually select the network used
when roaming outside of your home area.
Note: You can select a network other than your home
network only if there is a valid roaming
agreement between the two.
To automatically or manually select the network to
be used when roaming:
1. Press the Up or Down key until the appropriate
option highlights and then press the Centre key
or the Ok soft key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, go to step 2.
2. Press the Up or Down key until the network you
want highlights and then press the Centre key or
the Ok soft key. The phone will scan for that
network and you will be connected.
Security
The Security feature enables you to restrict the use
of your phone by others and to restrict the types of
calls.
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections. Also see pages 160-163.
152
Settings
PIN check
When the PIN check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN check feature, you
must enter your PIN.
The following options are available:
Disable: the phone connects directly to the
network when you switch it on. This option may not
be available depending on your network provider
Enable: you must enter the PIN each time the
phone is switched on.
Change PIN
This feature allows you to change your current PIN
to a new one, provided that the PIN check feature is
enabled. You must enter the current PIN before you
can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone lock
When the Phone lock feature is enabled, the phone
is locked and you must enter an 4 to 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change password menu.
Once the correct password has been entered, you
can use the phone until you switch it off.
153
Settings
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Change password
The Change password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Privacy
Using this menu, you can lock your media contents,
such as MMS, postcards, Photos, Video clips,
Pictures, Sounds and My sounds. Once you have
locked the contents, you must enter the phone
password to access the associated menus.
To
Press the
select an item to
lock
Up or Down key. To lock all
of the contents, select All.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
lock the marked
items
Ok soft key.
154
Settings
When the phone asks for the phone password,
enter the password and press the Centre key or the
Ok soft key.
Note: The password is preset to “00000000” at the
factory. To change this password, see
page 154.
SIM lock
When the SIM lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code to use a different SIM card.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
FDN mode
FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
Disable: you can call any number.
Enable: you can only call phone numbers stored in
Contacts. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu does not display.
155
Settings
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu does not display.
156
Solving Problems
If you are experiencing problems with your phone,
perform the following simple checks, before
contacting a service professional. This may save
you the time and expense of an unnecessary
service call.
When you switch your phone on, the
following messages may appear:
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
(PIN) supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu
(Menu 9.7.1).
Enter PUK
• The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your service provider.
157
Solving Problems
“No service,” “Network failure,”
“Service not available,” or “Not done”
displays
• The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialled
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
158
Solving Problems
The phone starts beeping and
“**Warning** Low battery” flashes on
the display
• Your battery is insufficiently charged. Recharge
the battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
Contacts entry
• Check that the number has been stored correctly,
by using the Contacts list feature.
• Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung aftersales service.
159
Access Codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
When requested for any of the codes explained
below, enter the appropriate code (displayed as
asterisks) and press the Centre key or the Ok soft
key. If you make a mistake, press the C key one or
more times until the incorrect digit is cleared and
then continue entering the correct code.
The access codes, except for the PUK and PUK2
codes, can be changed using the Security menu
(Menu 9.7). See page 152 for further details.
Important! Avoid using access codes resembling
emergency numbers, such as 112, so
that you do not accidentally dial an
emergency number.
Phone Password
The Phone lock feature uses the phone password to
protect your phone against unauthorised use. The
phone password is supplied with the phone and is
preset to “00000000” at the factory.
To
See
activate/deactivate the
Phone lock feature
page 153.
change the phone
password
page 154.
160
Access Codes
PIN
The Personal Identification Number or PIN (4 to
8 digits) protects your SIM card against
unauthorised use. It is usually supplied with the
SIM card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be used
until you re-enable it by entering the PUK (see
below).
To
See
activate/deactivate the
PIN check feature
page 153.
change the PIN
page 153.
PUK
The 8-digit PUK (PIN Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it,
contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the Centre key or the
Ok soft key.
2. Enter a new PIN of your choice and press the
Centre key or the Ok soft key.
3. When the Confirm new PIN message displays,
enter the same code again and press the Centre
key or Ok soft key.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact
your service provider for a new card.
161
Access Codes
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see page 156.
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the Centre key or the
Ok soft key.
2. Enter a new PIN2 of your choice and press the
Centre key or the Ok soft key.
3. When the Confirm PIN2 message displays,
enter the same code again and press the Centre
key or the Ok soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
162
Access Codes
Barring Password
A 4-digit barring password is required when you use
the Call barring function. You can obtain the
password from your service provider when you
subscribe to this function.
You can change this password in the Call barring
menu (Menu 9.4.2). See page 146 for further
details.
163
Health and Safety
Information
Exposure to Radio Frequency (RF)
Waves
THIS MODEL MEETS INTERNATIONAL GUIDELINES
FOR EXPOSURE TO RADIO WAVES
Your mobile phone is a radio transmitter and
receiver. It is designed not to be exceed the limits
for exposure to radio waves recommended by
international guidelines. These guidelines were
developed by the independent scientific
organization ICNIRP and inculde safty margins
designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known as
the Specific Absorption Rate, or SAR. The SAR limit
for mobile devices is 2W/kg and the highest SAR
value for this device when tested at the ear was
0.5W/kg1. As mobile phone offer a range of
functions, they can be used in other positions, such
as on the body as described in this user guide2. In
this case, the highest tested SAR value is 1.16W/
kg.
1) The testes are carried out in accordance with international
guidelines for testing.
2) For body worn operation, this model phone has been tested and
meets the RF exposure guidelines when used with a Samsung-supplied or approves accessory designated for this product or when
used with an accessory that contains no metal and that positions
the handset a minimum of 0cm from the body.
164
Health and Safety Information
As SAR is measured utilizing the devices highest
transmitting power the actual SAR of this device
while operating is typically below that indicated
above. This is due to automatic changes to the
power level of the device to ensure it only uses the
minimum level required to reach the network.
The World Health Organization has stated that
present scientific information does not indicate the
need for any special precautions for the use of
mobile devices. They note that if you want to
reduce your exposure then you can do so by
limiting the length of calls or using a ‘hands-free’
device to keep the mobile phone away from the
head and body.
Additional Information can be found on the websites
of the World Health Organization(http://
www.who.int/emf) or Mobile Manufacturers Forum
(http://www.mmfai.com/public).
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge, the type of battery and the
charger used. The battery can be charged and
discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal,
it is time to buy a new battery.
165
Health and Safety Information
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
166
Health and Safety Information
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you are
following the special regulations in a given area or
country.
Operating Environment
Remember to follow any special regulations in force
in any area and always switch your phone off
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
167
Health and Safety Information
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
168
Health and Safety Information
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch your phone off
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices require you to do so.
169
Health and Safety Information
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
the areas below decks on boats, chemical transfer
or storage facilities, vehicles using liquefied
petroleum gas, such as propane or butane, areas
where the air contains chemicals or particles, such
as grain, dust or metal powders, and any other area
where you would normally be advised to turn off
your vehicle engine.
170
Health and Safety Information
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
171
Health and Safety Information
Other Important Safety Information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment
in your vehicle is mounted and operating
properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch your phone off before boarding an aircraft.
The use of wireless phones in an aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
172
Health and Safety Information
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
173
Health and Safety Information
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
174
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet, and to take
full advantage of the features of your mobile phone,
here are a few definitions:
Active Slider
Ability to answer a call simply by pushing the slider
up.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Informs you that you have an incoming call when
you are engaged on another call.
Caller Line Identification Services (Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
175
Glossary
EMS (Enhanced Message Service)
An adaptation of the Short Message Service (SMS)
that allows you to send and receive ring tones and
the service provider’s logo, as well as combinations
of simple media to and from EMS-compliant
handsets. Because EMS is based on SMS, it can use
SMS centres the same way that SMS does. EMS
works on all Global System for Mobile
communications (GSM) networks. EMS senders can
use text, melodies, photos, sounds, and animations
to enhance the expressive power of messages that
are limited by the display constraints of mobile
devices.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS provides continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
GSM (Global System for Mobile
Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
176
Glossary
Java
Programming language generating applications that
can run on all hardware platforms, whether small,
medium or large, without modification. It has been
promoted for and geared heavily to the Web, both
for public Web sites and Intranets. When a Java
program runs from a Web page, it is called a Java
applet. When it is run on a mobile phone or pager, it
is called a MIDlet.
MMS (Multimedia Message Service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can be sent by email. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and also video clips and presentation
information.
Multi-party Calling
Ability to establish a conference call involving up to
five additional parties.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
177
Glossary
PIN (Personal Identification Number)
Security code that protects the phone against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
Proxy Server
A proxy server resides between a Web client, such
as a web browser, and a real Web server and acts
as an intermediary between them. When some
people browse a web site, their browser is not
actually connecting to the web server. The request
from their browser goes to a proxy server, and the
proxy server makes the request to the web server.
A proxy server can improve performance for groups
of users because it caches the results of all requests
for a certain amount of time. If a user requests a
web page that it already loaded for another user, it
reloads the page instead of forwarding the request
to the Web server, which can be a time-consuming
operation.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
178
Glossary
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft Keys
Two keys marked
purpose of which:
and
on the phone, the
• varies according to the function that you are
currently using.
• is indicated on the bottom line of the display just
above the corresponding key.
179
Glossary
Dual Band
Ability to operate with both DCS (1800 Mhz) and
GSM (900 Mhz) networks. The phone automatically
uses the network with the strongest signal and even
switches networks during a call within the same
operator’s network.
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
180
Index
A
Access codes • 162
Active slider • 138
Alarm • 68
Alert type • 142
Alphabet mode, text input •
36
Answering
call • 28
second call • 45
Anykey answer • 138
Auto redial • 138
B
Background image • 139
Backlight
description • 15
time, set • 140
Barring, calls • 148
Battery
charging • 19
installing • 18
low indicator • 20
precautions • 167
removing • 17
Broadcast messages • 96
Browser, WAP • 60
C
Calculator • 70
Calendar memos
copying • 121
deleting • 121
viewing • 121
writing • 119
Call back, message • 88, 90
Call cost • 131
Call log
dialled • 129
missed • 29, 128
received • 129
Call settings • 146
Call time • 130
Caller groups
editing • 127
searching • 126
Caller ID • 150
Calls
answering • 28
barring • 148
diverting • 146
ending • 23
from Contacts • 26
holding • 40
making • 22
redialling • 23
rejecting • 28
waiting • 45, 149
Camera
playing video • 112
recording video • 110
taking photos • 106
viewing picture • 111
CB (Cell Broadcast) messages
• 96
Characters, enter • 34
Charging battery • 19
Closed user group (CUG) •
151
Conference call • 45
Connect tone • 145
Contacts
copying • 124
deleting • 124
dialling • 26
editing • 123
options • 123
searching/dialling •
122
speed-dialling • 132
storing • 24, 125
Cost, calls • 131
Currency converter • 75
D
Date, set • 153
Deleting
calendar memo • 121
181
Index
call log • 128
Contacts • 124
multimedia message •
88, 91, 94
photo • 112
postcard • 93, 94
text message • 90, 92
video • 113
voice memo • 74
Delivery reports, message •
104
Dialled calls • 129
Display
backlight • 15
icons • 14
layout • 13
settings • 139
Diverting, calls • 146
DNS settings • 59
DTMF tones, send • 43
E
Earpiece volume • 27
Emergency calls • 173
EMS (Enhanced Message
Service) • 81
Error tone • 145
F
FDN (Fixed Dial Number)
mode • 157
Flashlight • 16
Forwarding, multimedia
message • 88
G
Games
downloading • 58
playing • 56
Graphic logo • 141
Greeting message • 136
182
H
Health and safety • 166
Holding, call • 40
I
Icons, description • 14
Images, downloaded • 114
Inbox, messages
multimedia • 85
text • 89
Infrared, connect • 135
International calls • 22
Internet • 60
J
Java service • 56
K
Key volume • 27
Keypad tones
selecting • 142
sending • 43
Keys
description • 11
location • 10
shortcut • 137
L
Language, select • 136
Last number, redial • 23
Locking
media contents • 156
phone • 155
SIM card • 157
Low battery indicator • 20
M
Memory status
Contacts • 134
downloaded items •
118
Index
multimedia messages
• 104
text messages • 104
voice memos • 75
Menus
accessing • 48
list • 50
Message tone • 143
Messages
cell broadcast • 96
greeting • 136
multimedia • 76
postcard • 83
text • 81
voice • 98
MIDlets, launch • 56
Minute minder • 145
Missed calls • 29, 128
MMS (Multimedia Messages
Service) • 76
Morning call • 68
Multimedia messages
creating/sending • 77
deleting • 88, 94
editing • 94
reading • 85, 93
setting • 78
Multi-party calls • 45
Muting
all sounds • 31
key tones • 43
microphone • 42
N
Names
entering • 34
searching/dialling •
122
Network selection • 154
Numbers, phone
searching/dialling •
122
storing • 125
O
On/off switch, phone • 20
Outbox, messages
multimedia • 93
Own number • 134
P
Password
call barring • 148, 165
phone • 156, 162
Phone
care and maintenance
• 175
display • 13
icons • 14
keys • 11
layout • 10
locking • 155
password • 162
resetting • 138
switching on/off • 20
unpacking • 9
Photo
deleting • 112
taking • 106
viewing • 111
PIN
changing • 155
description • 163
PIN2
changing • 158
description • 164
Power on/off tone • 144
Privacy • 156
Problems, solve • 159
PUK • 163
PUK2 • 164
R
Received calls • 129
Received messages
multimedia • 85
text • 89
Recording
183
Index
videos • 110
voice memos • 73
Redialling
automatically • 138
manually • 23
Resetting phone • 138
Ring tone • 141
Ring type • 142
Ring volume • 142
Road safety • 169
Roaming • 154
S
Safety
information • 166
precautions • 7
SAR information • 166
Scheduler • 119
Searching, Contacts • 122
Security, calls • 154
Sent messages
multimedia • 93
postcard • 94
text • 92
Service light • 16, 140
Shortcut, keys • 137
Silent mode • 31
SIM card
installing • 17
locking • 156
Slider tone • 144
SMS (Short Message Service)
Inbox • 85
Soft keys • 32
Sound settings • 141
Sounds, downloaded • 116
Speed-dial • 132
Switching on/off
microphone • 42
phone • 20
Symbol, text input • 39
T
T9 mode, text input • 37
Tasks, to do list
creating • 71
editing • 71
184
Templates
multimedia • 95
text • 95
Text input mode • 35
Text message
creating/sending • 76
deleting • 90, 105
reading • 89
setting • 103
Text, enter • 34
Time format • 153
Time, set • 153
To do list • 71
Tone
connect • 145
error • 145
keypad • 142
message • 143
minute minder • 145
power on/off • 144
ring • 141
slider • 144
Travel adapter • 19
U
User group • 151
V
Vibration • 142
Video
deleting • 113
playing • 112
recording • 110
Vodafone live! • 60
Voice mail • 98
Voice memo
deleting • 74
playing • 74
recording • 73
Voicemail server • 98
Volume, adjust
earpiece • 27
keypad tone • 27
ring • 142
Index
W
Waiting call • 149
Wallpaper • 139
WAP browser
access • 60
cache, clear • 67
favourite • 64
settings • 66
Wireless web • 60
World time • 153
Writing messages
multimedia • 76
postcard • 83
text • 81
185
186
187
➀ Press the Centre key.
➁ Scroll using the
Navigation keys through
the list of the menus until
you reach the menu you
want.
➂ Press the Select soft key.
➃ Scroll using the Up and
Down keys through the
list of the options until the
one you want is selected.
➄ Press the Select soft key.
Each of the two soft keys (
and
)
performs the function indicated by the
text above it, on the bottom line of the
display.
Access
the Menu
Functions
SGH-E810
Open the phone
or
Press the
key.
Press the
or
key on
the left side of the phone.
Answer a
Call
Adjust the
Volume
key.
Briefly press the
➀ Press the View soft key.
➁ Scroll using the Up or
Down key through the
missed calls.
➂ To return the call, press
the
key.
View Missed
Calls
Immediately
After Missing
Them
➀ Enter the number.
➁ Press the
key.
Make a Call
End a Call
Press and hold the
key.
Switch On/
Off
Quick Reference Card
Store
Numbers in
Contacts
Choose the
Alert Type
➀ Enter the number and
press the Save soft key.
➁ Select an icon.
➂ Press the Select soft key.
➃ Select a memory.
➄ Press the Select soft key.
➅ Enter the name.
➆ Press the Ok soft key.
➇ If necessary, change the
location number.
➈ Press the Ok soft key.
➉ Press the
key to
return to Idle mode.
➀ Select the Alert type
menu.
➁ Select an option:
• Light only
• Melody
• Vibration
• Vibration+melody
➂ Press the Select soft key.
Take a
Photo
Search for a
Number in
Contacts
➀ Press and hold the
Camera key in Idle
mode.
➁ Press the Camera key.
➂ Press the Save soft key.
➀ Press the Centre key.
➁ Press the 8 key.
➂ Select the Contacts list
option.
➃ Enter the first few letters
of the name.
➄ To scroll through the
names, press the Up or
Down key.
➅ Press the View soft key.
➆ To scroll through the
numbers, press the Up
or Down key.
➇ Press the
key to dial.
188
Declaration of Conformity (R&TTE)
For the following product:
GSM900/GSM1800 Dualband Digital
Portable Cellualr Telephone
(Ptoduct description)
SGH-E810
(Model name)
Manufactured at:
Samsung Electronics, Co., Ltd, 94-1, Imsoo-Dong, Gumi City, Kyung-Buk, Korea,
730-350
(factory names, address*)
to which this declaration relates, is in conformity with the following
standards and/or other normative documents.
Safty
: EN 60950-1:2001
EMC
: EN 301 489-01 v1.4.1 (2002-08)
SAR
: EN 50360:2001
EN 301 489-07 v1.2.1 (2002-08)
EN 50361:2001
Network : EN 301 511 v7.0.1 (2000-12)
We herby declare that [all essential radio test suites have been carried out
and that] the above named product is in conformity to all the essential
requirementes of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailes in
Annex [IV] of Directive 1999/5/EC has been follwed with the involvement of
the following Notified Body(ies):
BABT, Claremont House, 34 Molesey Road,
Walton-on-Thames, KT12 4RQ, UK
Identification mark: 168
The technical documentation kept at:
Samsung Electronics Euro QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
2004. 07. 07
(place and date of issue)
Yong-Sang Park / S. Manager
(Name and signature of authorized person)
* It is not the address of Samsung Service Centre. For the address or the phone number of
Samsung Service Centre, see the warranty card or contact the retailer where you
purchased your phone.
Download PDF

advertising