Samsung | SGH-X300 | Samsung SGH-X300 User Manual

SGH-X300
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Emergency calls
Key in the emergency number for your present
location, then press
.
Important safety precautions
Interference
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see "Health and
safety information" on page 64.
1
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
Indicates that you can get more information
on the referenced page.
→
2
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
[ ]
Indicates a key on the phone.
For example, [ ]
< >
Indicates a soft key, whose function is
displayed on the phone screen.
For example, <Menu>
•
Tri-band operation
Use your phone in worldwide GSM networks, in
any of 900, 1800, and 1900 bands.
Special features of your phone
•
FM radio
Listen to your favourite radio
stations anytime, anywhere.
•
IrDA
Send and receive Phonebook
entries via an infrared port.
Web browser
Access the wireless web to get
up-to-the-minute information
and a wide variety of media
content.
•
Java
Enjoy Java™-based embedded
games and download new
games.
•
Phonebook
Store home, office, or cellular
phone numbers for your entries.
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, and sounds.
•
Calendar and to do list
Keep track of your daily and
monthly schedules and tasks.
•
Alarm
Use your phone as an alarm
clock to wake you up in the
morning or notify you to an
event.
•
Calculator
Perform basic calculations and
do currency conversions.
•
Voice recorder
Record memos or sounds.
Special features of your phone
•
•
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Enter text
19
ABC, T9, Number, and Symbol mode
7
22
Advanced calling features
First steps to operating your phone
Menu functions
Install and charge the phone ..................................... 7
Power on or off........................................................ 8
Keys and display ..................................................... 9
Access menu functions ............................................ 11
Customise your phone............................................. 12
Make/Answer calls .................................................. 14
All menu options listed
Step outside the phone
Solve problems
26
62
Help and personal needs
Health and safety information
64
Index
71
14
Begin with games, the web, the FM radio, and other special
features
Play games ............................................................ 14
Browse the web...................................................... 15
4
15
16
17
18
Call functions
Buttons, features, and locations
Get started
Listen to the FM radio .............................................
Use Phonebook ......................................................
Send messages ......................................................
View messages.......................................................
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 SIM AT
p. 29
2
2 Call records
p. 29
1
2
3
4
5
6
p.
p.
p.
p.
p.
p.
Missed calls
Received calls
Dialled calls
Delete all
Call time
Call cost*
29
30
30
30
30
31
3 Network services
p. 31
1
2
3
4
5
6
7
p.
p.
p.
p.
p.
p.
p.
Call diverting
Call barring
Call waiting
Network selection
Caller ID
Closed user group
Band selection
31
32
32
33
33
33
34
4 Sound settings
p. 34
7 Organiser
p. 50
1
2
3
4
5
6
7
8
9
p.
p.
p.
p.
p.
p.
p.
p.
p.
1
2
3
4
5
6
7
p.
p.
p.
p.
p.
p.
p.
Ring tone
Ring volume
Alert type
Keypad tone
Message tone
Folder tone
Alert on call
Power on/off
Extra tones
34
34
34
35
35
35
35
35
35
5 Messages
p. 36
1 Text messages
2 Multimedia
messages
3 Push messages
p. 36
p. 41
6 Funbox
p. 45
1
2
3
4
5
6
p.
p.
p.
p.
p.
p.
WAP browser
Games
Sounds
Images
Delete all
Memory status
p. 45
45
48
49
49
49
49
Alarm
Calendar
Time & Date
Calculator
To do list
Voice memo
Currency exchange
50
51
52
52
53
53
54
8 FM Radio
p. 55
9 Phone settings
p. 56
1
2
3
4
5
6
7
8
9
0
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
Infrared activate
Display settings
Greeting message
Own number
Language
Security
Extra settings
Volume key
Short cut
Reset settings
56
58
59
59
59
59
61
61
61
61
Press <Phonebook> in Idle
mode.
Phonebook
p. 26
1
2
3
4
5
6
7
8
p.
p.
p.
p.
p.
p.
p.
p.
Search
New entry
Group search
Edit group
Speed dial
Delete all
Memory status
SDN*
26
26
27
27
28
28
28
29
* Shows only if supported by your
SIM card.
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Display
Phone
Travel Adapter
Headset
jack
External
display
Battery
User’s Guide
You can obtain various accessories from
your local Samsung dealer.
The items supplied with your phone
and the accessories available at your
Samsung dealer may vary, depending
on your country or service provider.
6
Navigation keys
(Up/Down/
Left/Right)
Left soft key
Volume keys
Dial key
Alphanumeric
keys
Infrared port
Special
function keys
Web access/
Confirm key
Right soft key
Power on/off/
Menu exit key
Cancel/Correct
key
Microphone
Get started
Install the battery.
Replace the cover.
First steps to operating your phone
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery
cover.
Plug the travel adapter into the phone.
Insert the SIM card.
Plug the adapter into a standard AC wall outlet.
If the phone is already
on, first turn it off by
holding [
].
Make sure that the
gold-coloured contacts
on the card face down
into the phone.
7
Get started
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
Power on or off
Power on
Remove the adapter from the phone.
2. Press and hold [
the phone.
Do not turn on
the phone when
mobile phone
use is
prohibited.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the battery low message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
1. Open the phone.
Power off
] to turn on
3. If necessary, enter the PIN
and press <OK>.
1. Open the phone.
2. Press and hold [
].
Keys and display
Keys
In Idle mode, access your favourite menus
directly. p. 61
In Menu mode, scroll through menu
options.
In Idle mode, launch the web browser.
In Menu mode, select the highlighted menu
option or confirm input.
Make or answer a call.
In Idle mode, retrieve numbers recently
dialled, missed, or received.
Delete characters from the display.
In Menu mode, return to the previous
menu level.
Get started
Perform the function indicated on the
bottom line of the display.
End a call.
Press and hold to switch the phone on or
off.
In Menu mode, cancel input and return the
phone to Idle mode.
Enter numbers, letters, and some special
characters.
In Idle mode, press and hold [1] to access
your voicemail server. Press and hold [0] to
enter an international call prefix.
Enter special characters.
In Idle mode, press and hold [ ] to
activate or deactivate Silent mode. Press
and hold [ ] to enter a pause between
numbers.
Adjust the phone volume.
In Idle mode, with the phone open, adjust
the keypad tone volume. With the phone
closed, press and hold to turn on the
backlight of the external display.
9
Get started
Display
IrDA feature active
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Menu
Icons*
Phonebook
Soft key function
indicators
show the current
functions assigned to
the soft keys.
Received signal strength
Call in progress
Out of your service area; you
cannot make or receive calls
GPRS network
Roaming
Call diverting feature active
p. 31
10
p. 56
Silent mode or call ringer set to
vibrate p. 13, p. 34
Mute mode
p. 25
New text message
New voicemail message
New multimedia message
Alarm set
p. 50
Battery power level
* Depending on your country or service provider, the icons
shown on the display may vary.
Access menu functions
Use the soft
keys
Select an
option
1. Press the appropriate soft key.
2. Press the Navigation keys to
move to the next or previous
option.
Get started
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
3. Press <Select> or [ ] to
confirm the function displayed
or option highlighted.
Select
4. To exit, choose either of the
following methods:
• Press < > or [C] to move
up one level.
• Press [ ] to return to Idle
mode.
Press the left soft
key to select the
highlighted option.
Press the right soft
key to return to the
previous menu
level
Use shortcuts
Press the number key
corresponding to the option you
want.
11
Get started
Customise your phone
Display
language
1. In Idle mode, press <Menu>
and select Phone settings →
Language.
2. Select a language.
Call ringer
melody and
volume
1. In Idle mode, press <Menu>
and select Sound settings →
Ring tone.
2. Select a ringtone.
3. Select Ring volume.
4. Adjust the volume level.
5. Press <OK>.
12
Idle mode
wallpaper
You can set wallpaper for the idle
screen.
1. In Idle mode, press <Menu>
and select Phone settings →
Display settings →
Wallpaper → Wallpaper list.
2. Select the image name you
want.
3. Scroll through images until you
find the one you want.
4. Press <Select>.
Menu
shortcuts
You can set [Up], [Left], and
[Right] to function as shortcuts to
access your favourite menus.
2. Select a key.
3. Select a menu to be assigned to
the key.
Silent mode
You can switch the phone to Silent
mode to avoid disturbing other
people.
Press and hold [ ] in Idle mode.
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on power-up.
Get started
1. In Idle mode, press <Menu>
and select Phone settings →
Short cut.
Phone lock
1. In Idle mode, press <Menu>
and select Phone settings →
Security → Change
password.
2. Enter the default password,
00000000, and press <OK>.
3. Enter a new 4- to 8-digit
password and press <OK>.
4. Enter the new password again
and press <OK>.
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
<OK>.
13
Make/Answer calls
Make a call
Step outside the phone
1. Enter an area code and phone
number.
Begin with games, the web, the FM radio, and other
special features
2. Press [
Play games
].
3. To end the call, press [
Answer a call
1. When the phone is ringing,
press [ ].
2. To end the call, press [
Press [ / ].
Adjust the
volume during
a call
14
].
].
Launch a
game
1. In Idle mode, press <Menu>
and select Funbox → Games
→ a game.
2. Scroll to START GAME and
press [ ].
3. Select a game mode or press
any key to start the game.
4. To end the game, press [
and then <Yes>.
]
Browse the web
Listen to the FM radio
Launch the
web browser
Navigate the
web
In Idle mode, press [
].
Listening to
the radio
1. Plug the connector of the
supplied headset into the jack
on the right side of the phone.
Step outside the phone
Using a built-in web browser, you can easily access the
wireless web to get a variety of up-to-date services
and information and to download web content.
2. In Idle mode, press [Down].
3. Press <Options> and select
Power on/off → On.
•
•
•
•
•
To scroll through browser items,
press [Up] or [Down].
To select an item, press [ ].
To return to the previous page,
press [C].
To access the Favorite list, press
and hold [ ].
To access options, press and
hold [ ].
4. Press [Left] or [Right] to find
available radio stations.
5. To turn off the radio, disconnect
the headset from the phone.
15
Step outside the phone
Storing a
radio station
1. From the station list on the FM
Radio screen, select an empty
location.
Use Phonebook
Add an entry
2. Select Add.
2. Select a number type.
3. Enter the station title and press
<OK>.
3. Select Phone or SIM.
4. Enter a name and press <OK>.
4. Enter the frequency of the
station and press <OK>.
5. Select a location in which you
want to store the station.
1. In Idle mode, enter a phone
number and press <Save>.
5. Press <OK> to save the entry.
Find an entry
1. In Idle mode, press
<Phonebook> and select
Search.
2. Enter the first few letters of the
name you want.
3. Select an entry.
4. Scroll to a number and press
[ ] to dial, or press
<Options> to access options.
16
Send messages
1. In Idle mode, press <Menu>
and select Messages → Text
messages → Write new.
2. Enter the message text.
6. Select a destination type.
3. Press <Options> and select
Save and send or Send only.
7. Select one of Phone number,
E-mail address, or
Phonebook.
4. If you selected Save and send,
select a memory location.
5. Enter a destination number and
press <OK>.
Send a
multimedia
message
(MMS)
5. When you have finished, press
<Options> and select Send.
1. In Idle mode, press <Menu>
and select Messages →
Multimedia messages →
Write new.
2. Enter the message subject
press <OK>.
Step outside the phone
Send a text
message
(SMS)
4. Select an adding option and add
message contents.
8. Enter a destination number or
address and press <OK>, or
select a number from
Phonebook.
9. To add other destinations,
select Add destination and
repeat from step 7.
10. When you have finished, select
Send message.
3. Select Add here.
17
Step outside the phone
View messages
View a text
message
When a notification appears:
1. Press <View>.
2. Select the message from the
Inbox.
From the Inbox:
1. In Idle mode, press <Menu>
and select Messages → Text
messages → Inbox.
2. Select a message.
View a
multimedia
message
When a notification appears:
1. Press <View>.
2. Press <Options> and select
Retrieve.
3. Select the message from the
Inbox.
18
From the Inbox:
1. In Idle mode, press <Menu>
and select Messages →
Multimedia messages →
Inbox.
2. Select a message.
•
•
Enter text
ABC, T9, Number, and Symbol mode
You can enter text in some features, such as
Messages, Phonebook, or Organiser, using ABC mode,
T9 mode, Number mode, and Symbol mode.
Changing the text input mode
: Number mode
None: Symbol mode
Using ABC mode
Press the appropriate key until the character you want
appears on the display.
Characters in order displayed
Key
Upper case
The text input mode indicator displays when the
cursor is in a text field
Lower case
Example: Writing an SMS message
Write new
Options
Text input mode
indicator
Press the right soft key to change the input mode:
•
: ABC mode
•
: T9 mode
space
(Creating an SMS message with GSM-alphabet encoding)
19
Enter text
Other ABC mode operations
Using T9 mode
•
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
•
•
•
•
•
20
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
Press [ ] to insert a space.
Press [ ] to change case. Initial capital ( ),
Capital lock ( ), and Lower case ( ) are
available.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Depending on your country, you may be able to
access an input mode for your specific language by
press and holding [ ].
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter Hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Other T9 mode operations
Using Number mode
•
Number mode enables you to enter numbers.
•
•
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Add displays on the bottom line.
3. Press <Add>.
4. Enter the word you want using ABC mode and
press <OK>.
Press the keys corresponding to the digits you want.
Enter text
•
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to change case. Initial capital ( ),
Capital lock ( ), and Lower case ( ) are
available.
Press [Left] or [Right] to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Using Symbol mode
Symbol mode enables you to insert symbols.
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the symbol(s)
[C].
insert the symbol(s)
<OK>.
21
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
• Press [C] to clear the last digit or press and hold
[C] to clear the whole display. You can move the
cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
22
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
p. 26
Phonebook.
You can also use the Speed dial feature to assign your
most frequently called numbers to specific number
keys.
p. 28
You can quickly dial a number from Phonebook using
its location number assigned when stored.
To dial a number from the phone’s memory:
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the location number for the phone number
you want and press [ ].
3. Press [Up] or [Down] to scroll through other
numbers, if necessary.
4. Press <Dial> or [
] to dial the number you want.
Ending a call
Close the phone or press [
].
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press <Accept> or [
•
•
•
When Active folder is active, you can simply open
the phone.
p. 61
Press <Reject> or [ ] to reject a call.
Press and hold [ / ] to reject a call or mute the
ringer, depending on the Volume key setting.
p. 61
Call functions
To dial a number from the SIM card:
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Press [Up] or [Down] to scroll through other
numbers, if necessary.
3. Press <Dial> or [ ] to dial the number you want.
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
] to answer the call.
Tips for answering a call
•
When Anykey answer is active, you can press
any key to answer a call, except for <Reject> and
[ ].
p. 61
23
Call functions
Using the headset
Placing a call on hold/Retrieving
Use the headset to make or answer calls without
holding the phone.
Press <Hold> or <Unhold> to place the call on hold
or retrieve the call.
Connect the headset to the jack on the right side of
the phone. The button on the headset works as
follows:
Making a second call
To
Press
redial the last call
the button twice.
answer a call
the button.
end a call
the button.
You can make another call if your network supports
this function.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. To end the current call, press [ ].
Answering a second call
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
24
You can answer an incoming call, if your network
supports this function and you have activated the Call
waiting feature.
p. 32
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. To end the current call, press [ ].
Using the speakerphone feature
•
Use the speakerphone feature to talk and listen with
the phone a short distance away.
Using In-call options
Press <Options> to access the following options
during a call:
• Menu: access the phone's menu functions.
• Mute/Unmute: switch off the phone's microphone
so that the other person on the phone cannot hear
you, or switch it back on.
• Mute keys/Send keys: switch the key tones on
or off.
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
•
•
•
Call functions
Press [ ] and then <Yes> to activate the
speakerphone feature. Press the key again to switch
back to the earpiece.
Send DTMF: send the DTMF (Dual tone
multi-frequency) tones as a group. The DTMF
tones are the tones used in phones for tone
dialling, sounding when you press the number
keys. This option is helpful for entering a password
or an account number when you call an automated
system, like a banking service.
Phonebook: access the contact list.
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
Select one: select one of multi-party call
participants. You can then use the following
options:
Private: have a private conversation with one
multi-party call participant. The other participants
can converse with each other. After the private
conversation, select Join to return to the
multi-party call.
Remove: disconnect one multi-party call
participant.
25
Menu functions
Use this menu to search for numbers in Phonebook.
While viewing an entry, press <Options> to access
the following options:
• Paste: paste the selected number into the dialling
screen.
• Edit: edit entry information.
• Delete: delete the selected entry from the name.
• Copy: copy the number to the phone’s memory or
to the SIM card.
• Caller group: assign the selected number to a
caller group.
• Add entry: add a new entry to the selected name.
• Send via IrDA: send the selected number or all
numbers in entry via the infrared port. p. 56
Finding an entry
New entry
1. Enter the first few letters of the name that you
want to find.
2. Select a name from the list.
3. Scroll to a number and press [ ] to dial, or press
<Options> to access Phonebook options.
Use this menu to add a new entry to Phonebook.
All menu options listed
Phonebook
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
To access this menu, press <Phonebook> in Idle
mode.
Search
26
Using Phonebook options
Storing an entry in the phone’s memory
1. Select an entry type.
•
: Mobile phone number
•
•
•
5.
Group search
Use this menu to search for your numbers in
Phonebook in caller groups.
1. Enter the first few letters of the group name.
2. Select a group.
3. Select the name you want.
4. Press [ ] to dial the number or <Options> to
access Phonebook options.
Use this menu to edit your caller groups’ properties.
1.
2.
3.
4.
5.
Select a group and change the group settings by using
the following options:
• Call ring tone: set a ringtone for incoming calls
from the group members.
• SMS tone: set a ringtone for incoming messages
from the group members.
• Graphic: set a graphic icon for incoming calls from
the group members.
• Group name: assign a name to the group.
Phonebook
Edit group
Storing an entry on the SIM card
Select an entry type.
Select SIM.
Enter a name and press <OK>.
Enter a number and press <Save>
Change the location number, if you want, and
press <OK>.
Menu functions
2.
3.
4.
: Office phone number
: Home phone number
: E-mail address; an e-mail address can be
stored only in the phone’s memory.
Select Phone.
Enter a name and press <OK>.
Enter a number or an e-mail address and press
<Save>.
Change the location number, if you want, and
press <OK>.
27
Menu functions
Speed dial
Delete all
Use this menu to assign speed dial numbers (2 to 9) to
eight of your most frequently called numbers.
Use this menu to delete all of the entries from your
phone’s memory, your SIM card, or both.
1. Press [ ] to select the memory locations to be
cleared.
2. Press <Delete>.
3. Enter the phone password and press <OK>.
Assigning speed dial entries
1. Select a key location from 2 to 9. Key 1 is reserved
for your voicemail server.
2. Select a name from the Phonebook list.
3. Select the number you want.
Managing speed dial entries
From the Speed dial list, press <Options> to access
the following options:
• Change: assign a different number to a key.
• Delete: clear the speed dial setting for a key.
• Delete all: clear the speed dial settings for all
keys.
• Number: check the number assigned to a key.
Dialling speed dial entries
In Idle mode, press and hold the appropriate key.
28
The password is preset to 00000000. You can
change this password. p. 60
4. Press <Yes> twice to confirm the deletion.
Memory status
Use this menu to check the number of entries you
have stored in the phone’s memory and on the SIM
card.
SDN
Call records
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your SIM
card supports SDN.
Use this menu to view the calls you have dialled,
received, or missed, and the length of calls. You can
also check the cost of your calls, if your SIM card
supports this function.
Menu functions
Scroll to the number you want and press <Dial> or
[ ].
(Menu 2)
To access this menu, press <Menu> in Idle mode and
select Call records.
Missed calls (Menu 2.1)
This menu is available if you use a SIM AT card that
supports SIM Application Toolkit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
To access this menu, press <Menu> in Idle mode and
select SIM AT.
This menu displays the most recent calls you did not
answer.
SIM AT (Menu 1)
SIM AT (Menu 1)
Accessing a call record
1. Select a call record.
2. Press [Up] or [Down] to move to another call
record.
3. Press [ ] to dial, or <Options> to access call
record options.
29
Menu functions
Using call record options
Call time (Menu 2.5)
While viewing call details, press <Options> to access
the following options:
• Edit: change the number of the selected call
record.
• Delete: delete the selected call record.
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total sent: check the total length of all the calls
you have dialled.
• Total received: check the total length of all the
calls you have received.
• Reset timers: reset the call timers. You need to
enter the phone password.
Received calls (Menu 2.2)
This menu displays the most recent calls you have
received.
Dialled calls (Menu 2.3)
This menu displays the most recent calls you have
dialled.
Delete all (Menu 2.4)
Use this menu to delete all of the records in each call
type.
1. Press [ ] to select the call types to be cleared.
2. Press <Delete>.
3. Press <Yes> twice to confirm the deletion.
30
The password is preset to 00000000. You can
change this password. p. 60
Network services (Menu 3)
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
• Max cost: check the maximum cost limit set in
Set max cost.
• Reset counters: reset the cost counters.
• Set max cost: set the maximum cost authorised
for your calls.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
Menu functions
Call cost (Menu 2.6)
To access this menu, press <Menu> in Idle mode and
select Network services.
Call diverting (Menu 3.1)
Network services (Menu 3)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: divert calls when you are on another
call.
• No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
• Cancel all: cancel all call diverting options.
31
Menu functions
2. Select the type of calls to be diverted.
3. Press <Activate>. To deactivate call diverting,
press <Remove>.
4. Enter the number to which calls are to be diverted
and press <OK>.
5. If you selected No reply, select the length of time
the network delays before diverting a call.
Call barring (Menu 3.2)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing: prohibit all outgoing calls.
• International: prohibit international calls.
• International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home country.
• All incoming: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
service area.
32
•
Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
• Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Press <Activate>. To deactivate call barring,
press <Deactivate>.
4. Enter the call barring password supplied by your
service provider and press <OK>.
Call waiting (Menu 3.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Press <Activate>. To deactivate call waiting,
press <Deactivate>.
Use this menu to set incoming and outgoing calls to be
restricted to a selected user group. For details about
how to create a closed user group, contact your
service provider.
• Index list: list, add, or delete CUG index
numbers. Press <Options> to access the options
for setting up an index list.
• Outside access: enable calls to numbers other
than those in the Closed user group. This feature
depends on the nature of your CUG subscription.
• Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from the
list.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
Caller ID (Menu 3.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. If you select Default, the phone
will use the default setting provided by the network.
Some networks do not allow the user to change this
setting.
Network services (Menu 3)
Closed user group (Menu 3.6)
This network service allows you to select the network
used when roaming outside of your home area, or let
the network to be chosen automatically.
Menu functions
Network selection (Menu 3.4)
33
Menu functions
Band selection (Menu 3.7)
Sound settings
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900 and Combined GSM 900/1800.
Use this menu to customise various sound settings.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
Ring tone (Menu 4.1)
(Menu 4)
To access this menu, press <Menu> in Idle mode and
select Sound settings.
Use this menu to select a ringtone for the call ringer.
You can select one of the embedded ringtones or
downloaded sounds.
Ring volume (Menu 4.2)
Use this menu to adjust the ringtone volume.
Alert type (Menu 4.3)
Use this menu to specify how you are to be informed
of incoming calls.
• Melody: the phone rings using the selected
ringtone.
• Vibration: the phone vibrates but not rings.
• Vibra+melody: the phone vibrates three times
and then starts ringing.
34
Keypad tone (Menu 4.4)
Folder tone (Menu 4.6)
Use this menu to select the tone that the phone
sounds when you press a key.
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Message tone (Menu 4.5)
Alert on call (Menu 4.7)
Use this menu to select whether or not the phone
informs you when you receive a new message or when
the time for an alarm comes during a call.
Power on/off (Menu 4.8)
Sound settings (Menu 4)
Use this menu to change the sound settings for
incoming SMS messages, MMS messages, and cell
broadcast (CB) messages individually.
• SMS tone: specify how you are informed of new
SMS messages.
• SMS-CB tone: specify how you are informed of
new CB messages.
• MMS tone: specify how you are informed of new
MMS messages.
• Repetition: set whether or not the phone repeats
alerting you to new messages. If you selected
Periodic, the phone alerts you every 2 minutes
until you view the message.
Menu functions
You can adjust the keypad tone volume using [ / ]
in Idle mode.
Use this menu to select the melody that the phone
plays when it is switched on or off.
Extra tones (Menu 4.9)
Use this menu to customise additional tones for the
phone.
• Error tone: set the phone to beep when you make
a mistake.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
35
Menu functions
•
Connect tone: set the phone to beep when an
outgoing call is connected to the system.
Messages
(Menu 5)
Use the Messages menu to send and receive short
messages, and multimedia messages. You can also
access push messages from web servers.
•
Send: forward the message to other people.
Text reply: reply to the sender.
Call back: make a call to the sender.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Select objects: save images or sounds from the
message into your phone’s memory.
To access this menu, press <Menu> in Idle mode and
select Messages.
•
Text messages (Menu 5.1)
Outbox (Menu 5.1.2)
Short Message Service (SMS) allows you to send or
receive text messages including simple pictures,
melodies, and animated images.
Use this menu to access SMS messages that you have
sent or have saved to send at a later time.
Inbox (Menu 5.1.1)
Use this menu to access SMS messages you have
received.
While viewing a message, press <Options> to access
the following options:
• Delete: delete the message.
36
•
•
•
•
While viewing a message, press <Options> to access
the following options:
• Delete: delete the message.
• Send: forward the message to other people.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
•
•
•
Write new (Menu 5.1.3)
2. Press <Options> to access the following options:
• Send only: just send the message.
• Save and send: save the message in Outbox
and then send it.
• Save only: save the message in Outbox to
send it later.
• Text formatting: change the text attributes.
3.
4.
5.
6.
Messages (Menu 5)
Use this menu to create and send an SMS message.
1. Enter your message.
The maximum number of characters allowed in
a short message varies by service provider. If
your message exceeds the maximum number of
characters, the phone will split the message.
Add objects: add a sound, melody, picture, or
animated image to the message.
• Add templates: add one of text templates.
• Add emoticon: add one of preset emoticons.
• Add phonebook: add a phone number or
e-mail address from Phonebook.
• Add bookmark: add a web page’s address
from the Favorite list.
• Language: change the language to be used in
T9 mode.
When you have finished, press <Options> and
select Send only or Save and send.
If you selected Save and send, select a memory
location.
Enter a destination number.
Press <OK> to send the message.
Menu functions
Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Select objects: save images or sounds from the
message into your phone’s memory.
37
Menu functions
Templates (Menu 5.1.4)
Emoticon templates (Menu 5.1.5)
Use this menu to create templates with the sentences
you use frequently so that you can retrieve and insert
them when composing an SMS message.
Your phone provides preset emoticons so that you can
retrieve and insert them when composing an SMS
message. Use this menu to create or edit emoticons.
Creating a template
1. Select an empty location.
2. Select Edit.
3. Enter a message and press <OK>.
Creating an emoticon
1. Select a category.
2. Press <Options> and select Add.
3. Enter an emoticon and press <Save>.
Using template options
Using emoticon options
From the template list, press <Options> to access
the following options:
• Edit: create a new template or edit the selected
template.
• Send message: create and send a new message
using the template.
• Delete: delete the selected template.
38
From the emoticon list, press <Options> to access
the following options:
• Add: add a new emoticon.
• Edit: edit the selected emoticon.
• Send: create and send a new message using the
emoticon.
• Delete: delete the selected emoticon.
Settings (Menu 5.1.6)
Use this menu to customise the SMS settings.
•
Messages (Menu 5)
Setting x (where x is the setting group number):
set the properties of each setting group. The group
accessed last is activated for sending or receiving
subsequent messages.
Service centre: store or changes the number of
your message centre.
Default destination: store a default destination
number. It will be displayed in the Destination
field.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Default validity: set the length of time your
messages are stored in the SMS server.
Setting name: change the name of the setting
group.
Common settings: the following options are
available:
Reply path: allow recipients to reply to you
through your SMS server.
Delivery reports: set the network to inform you
when your messages have been delivered.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to Uni-code
if you enter a uni-code character.
Use of uni-code encoding will reduce the maximum
number of characters in a message to about half. If
this menu is not shown, your phone provides the
automatic character encoding by default.
Menu functions
The setting options available in this menu may vary
depending on your service provider.
•
Delete all (Menu 5.1.7)
Use this menu to delete SMS messages in each
message folder all at once.
1. Press [ ] to select the message folders to be
cleared.
39
Menu functions
2. Press <Delete>.
3. Press <Yes> twice to confirm the deletion.
Memory status (Menu 5.1.8)
Use this menu to check the number of SMS messages
you have stored in each folder.
Voice mail (Menu 5.1.9)
Use this menu to store the number of the voicemail
server and access your voicemails.
You must enter the voicemail server number before
accessing the server. Your service provider can give
you the number.
•
•
Connect to voice server: connect to the
voicemail server to allow you to listen to your
messages. You can also connect to the voicemail
server by pressing and holding [1] in Idle mode.
Voice server number: change the voicemail
server number.
Broadcast (Menu 5.1.0)
Your phone receives Cell Broadcast (CB) messages,
which are messages related to various topics, such as
weather forecast, traffic, and news report, from
network. Use this menu to access broadcast messages
or change the settings for the service.
• Read: open received CB messages.
The Volatile box saves messages until the phone
is switched off.
The Archive box saves messages indefinitely.
Press <Options> and select Save when a text
notification appears or while viewing a CB message
in the Volatile box. The message is saved in the
Archive box.
• Receive: select to receive CB messages, or not.
• Channel list: specify the channels from which you
receive CB messages.
• Language: select the preferred languages in
which CB messages display.
Please contact your service provider for details.
40
Multimedia messages (Menu 5.2)
Inbox (Menu 5.2.1)
While viewing a message, press <Options> to access
the following message options:
Notifications
• Retrieve: retrieve the message from the MMS
server.
Delete: delete the notification.
More properties: access the message properties.
Messages
• Delete: delete the message.
• Reply: reply to the sender.
• Call back: make a call to the sender.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Forward: forward the message to other people.
• Save picture: save an image from the message
into the Images folder.
• Save sound: save a sound from the message into
the Sounds folder.
• Properties: access the message properties.
Messages (Menu 5)
Use this menu to access MMS messages that you have
received. The following icons tell you the message
status:
•
Read notification
•
Unread notification
•
Retrieving from the server
•
Processing your request
•
Failed to retrieve
•
Read message
•
Unread message
•
•
Menu functions
Multimedia Message Service (MMS) delivers messages
containing a combination of text, an image, and an
audio, from phone to phone or from phone to e-mail.
Outbox (Menu 5.2.2)
Use this menu to access MMS messages that you have
sent. The following icons tell you the message status:
•
Being sent
•
Sent
41
Menu functions
•
•
Failed to send
To be sent
While viewing a message, press <Options> to access
the following options:
• Delete: delete the message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Send: send or resend the message.
• Edit message: edit the message.
• Properties: access the message properties.
Draft (Menu 5.2.3)
Use this menu to access MMS messages you have
saved to send at a later time.
You can view a message and use the options the same
as in Outbox.
Write new (Menu 5.2.4)
Use this menu to create and send an MMS message.
1. Enter the message subject and press <OK>.
42
2. Press <Options> to access the following options:
• Add text: add message text.
• Add picture: add a picture to the message.
• Add sound: add a sound clip to the message.
• Send: send the message.
• Save: save the message in Draft or
Templates.
• Settings: change the message settings.
p. 44
• Add destination: enter destination numbers
or addresses.
• Preview: view the message as it will be shown
on the recipient’s phone.
The maximum size allowed for a message can
differ, depending on your service provider.
3. After adding items, highlight one and press
<Options> to access the following options for
editing the message:
• Edit text/Edit picture/Edit sound: edit the
text, picture, or sound.
•
Templates (Menu 5.2.5)
Use this menu to access MMS templates you have
saved as templates so that you can use them for
composing an MMS message.
Menu functions
From the template list, press <OK> to access the
following options:
• Edit message: create and send a new message
using the template.
• Delete: delete the selected template.
Messages (Menu 5)
Add page: add pages. Move to each page by
pressing [Left] or [Right].
• Delete: remove the added item.
• Duration: set how long one page displays.
After the specified time, the display
automatically scrolls to the next page.
4. When you have finished, press <Options> and
select Send.
5. Select a destination type (To, Cc, Bcc).
6. Select one of Phone number, E-mail address, or
Phonebook.
7. Enter a phone number or an e-mail address and
press <OK>, or select one from Phonebook.
8. To add more destinations, select Add destination
and repeat from step 6.
9. To enter additional numbers or addresses to other
destination types, press < >and repeat from step
5.
10. When you have finished, select Send message.
Delete all (Menu 5.2.6)
Use this menu to delete MMS messages in each
message folder all at once.
1. Press [ ] to select the message boxes to be
cleared.
2. Press <Delete>.
3. Press <Yes> twice to confirm the deletion.
Memory status (Menu 5.2.7)
Use this menu to check the amount of memory
currently in use in each message box.
43
Menu functions
Setup (Menu 5.2.8)
Use this menu to customise the MMS settings.
• Delivery report: set the network to inform you
when your messages have been delivered.
• Read reply: send a read-reply request along with
your messages.
• Auto download: set whether or not your phone
retrieves new incoming messages from the MMS
server without notifications.
• Message acceptance: select the categories of
messages you want to receive.
• Hide ID: set whether to hide your phone number
from the recipient’s phone.
• Expiry date: set the length of time your messages
are stored in the message server.
• Delivery time: set the time delay before
messages are sent.
• Priority: set the priority level of your messages.
• Report allowed: set the network to inform the
sender when a message has been delivered to you.
44
•
Page duration: set how long one page in your
outgoing messages displays. After a specified time,
the display automatically scrolls to the next page.
MMS profile (Menu 5.2.9)
You can configure required network connection
settings for MMS. The profile accessed last is
automatically activated for sending or receiving
subsequent messages.
Check with your service provider before you
change any MMS settings on your phone.
For each profile, set the following parameters:
• Profile name: assign a name to the MMS profile.
• Connection URL: enter the URL address of your
MMS server.
• Security: select a security mode for data
transmission.
• IP address: enter the IP address of the MMS
server.
• User name: enter the login ID.
•
•
Password: enter the login password.
APN: enter the access point name of the MMS
server.
To access this menu, press <Menu> in Idle mode and
select Funbox.
WAP browser (Menu 6.1)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
From the wireless web, you can access up-to-date
information and a wide variety of media content, such
as games, wallpapers, and ringtones.
Funbox (Menu 6)
Use this menu to access push messages from the
wireless web server or change the settings for
receiving push messages.
• Inbox: view push messages you have received.
• Receive: determine whether or not your phone
receives push messages.
Never: the phone rejects push messages.
Always: the phone receives all push messages.
• Delete all: delete all push messages.
The Funbox menu allows you to use the web browser,
play Java games, and access images and sounds
stored in the phone’s memory.
Menu functions
Push messages (Menu 5.3)
Funbox (Menu 6)
Home (Menu 6.1.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [ ] in Idle mode.
45
Menu functions
•
Navigating the web browser
46
To
Press
scroll through browser items
[Up] or [Down].
select a browser item
[
return to the previous page
[C].
access the Favourite list
and hold [
].
•
Clear cache: delete information stored in the
cache. The cache is a temporary memory site that
stores recently accessed web pages.
Inbox: read messages received from a web
server.
Exiting the web browser
].
Press [ ] to end the network connection and exit the
browser.
Using page options
Favorite (Menu 6.1.2)
From any web page, press and hold [ ] to access the
following options:
• Reload: reload the current page with updated
information.
• Home: return to the homepage.
• Go to URL: enter a URL address manually.
• Show URL: view the URL address of the current
web page.
• Edit home: change the page to be used for your
homepage.
Use this menu to save URL addresses as bookmarks in
order to quickly access web pages.
Adding a bookmark
1. Select an empty location.
2. Enter a URL address and press <Enter>.
3. Enter a title for the bookmark and press <Enter>.
Using bookmark options
http:// (Menu 6.1.3)
Settings (Menu 6.1.4)
Use this menu to set up connection profiles to be used
for the web browser. The profile accessed last is
automatically activated for accessing the wireless web.
Check with your service provider before you change
any browser settings on your phone.
When the bearer is set to GPRS:
• IP address: enter the IP address of the proxy
server.
• User name: enter the login ID.
• Password: enter the login password.
• APN: enter the access point name of the GPRS
network gateway.
Funbox (Menu 6)
Use this menu to manually enter a URL address and
access the associated web page.
For each server, set the following parameters:
• Profile name: enter a profile name.
• Homepage URL: enter the URL address of the
page to be used as your homepage.
• Security: select a security mode for data
transmission.
• Bearer: select the network bearer type; GPRS or
Data. Remaining options depend on the bearer
setting.
Menu functions
After saving an item, press <Options> to access the
following options:
• Go to URL: access the bookmarked web page.
• Edit: edit the URL address and title of the
bookmark.
• Delete: delete the bookmark.
When the bearer is set to Data:
• IP address: enter the IP address of the proxy
server.
• Login name: enter the login ID.
47
Menu functions
•
•
•
Password: enter the login password.
Dial-up number: enter the PPP phone number.
Data call type: select a call type for data
transmission.
Clear cache (Menu 6.1.5)
Use this menu to clear information stored in the cache.
Games (Menu 6.2)
You can download Java applications from various
sources using the web browser, and store them in your
phone. Use this menu to access and play Java games.
Java services may not be available, depending on
your service provider.
Accessing an embedded game
1. Select the game you want on the Games list.
On the startup screen of the game, you can access
the following options:
• START GAME: start a new game.
48
•
CONTINUE: continue the last game you
played.
• HIGH SCORE: view the high score table. This
option may not be available for some games.
• HOW TO PLAY: view how to play the game
and the key functions for the game.
• OPTION: switch on or off the game sound.
2. Select START GAME or CONTINUE to start a
game.
3. Follow the onscreen instructions.
Viewing game information
Scroll to the game you want and press <Info>.
Changing the DNS settings
You may need to change the DNS (Domain Name
Server) setting of the Java server at your service
provider’s instructions.
1. Select Setting on the Games list.
2. Enter the primary address and press <OK>.
3. Enter the secondary address and press <OK>.
Delete all (Menu 6.5)
Use this menu to access sounds downloaded from the
wireless web or received in messages.
Use this menu to delete all of the downloaded items in
the Games, Sounds, and Images folders.
1. Press [ ] to select the folders to be cleared.
2. Press <Delete>.
3. Press <Yes> twice to confirm the deletion.
Images (Menu 6.4)
Memory status (Menu 6.6)
Use this menu to check the total amount of memory
for media items and the amount of memory currently
in use in each media box.
Funbox (Menu 6)
While reviewing a file, press <Options> to access the
following options:
• Rename: change the file name.
• Delete: delete the file.
• Set as ring tone: set the sound as your call
ringtone.
Menu functions
Sounds (Menu 6.3)
Use this menu to access images downloaded from the
wireless web or received in messages.
While reviewing a file, press <Options> to access the
following options:
• Rename: change the file name.
• Delete: delete the file.
• Set as wallpaper: set the image as wallpaper for
the idle screen.
49
Menu functions
Organiser
(Menu 7)
The Organiser menu enables you to keep track of
your schedule and tasks, and to record voice memos.
You can also set the time and date and use convenient
features, such as an alarm clock, a calculator, and a
currency converter.
To access this menu, press <Menu> in Idle mode and
select Organiser.
Alarm (Menu 7.1)
Use this menu to set alarms to sound at a specific
time.
Setting an alarm
1. Select the type of alarm.
2. Enter the time for the alarm to sound.
Press <Options> and select Alarm tone to
change the alarm tone.
3. Press [ ].
4. Select AM or PM in 12-hour time format.
50
5. If you selected Morning call in step 1, select a
schedule for the alarm to work.
Stopping an alarm
When the alarm sounds, press any key.
Deactivating alarms
When you do not need an alarm to sound any longer,
you can deactivate it.
• To remove an alarm set, select it from the Alarm
screen, press <Options>, and select Remove
alarm.
• To remove all alarm sets, select Remove alarm
from the Alarm screen.
Setting the alarm to sound even if the phone
is off
From the Alarm screen, select Autopower → Enable.
If the phone is off when it is time for the alarm to
sound, the phone switches on and sounds the alarm.
1. Select a date on the calendar.
2. Enter your memo and press <OK>.
3. Press [ ] to set an alarm to sound on the chosen
day. Otherwise, press <Skip>.
4. Enter the time for the alarm to sound.
Press <Melody> to change the alarm tone.
5. Press [ ].
6. Select AM or PM in 12-hour format.
The colour of the date on the calendar changes to
green to indicate that a memo exists for that date.
When you access the Calendar menu, the calendar in
Month view appears with today’s date highlighted.
Selecting a day
•
•
•
Press [Left] or [Right] to move by day.
Press [Up] or [Down] to move by week.
Press [ / ] to move by month.
Using calendar options
From the calendar, press <Options> to access the
following options:
• Search all: view all of the memos you have
created.
• Delete all: delete all memos.
• Go to date: enter the specific date you want to
access.
• Exit: exit the Calendar menu.
Organiser (Menu 7)
Entering a new memo
Use this menu to write memos on your schedule or set
alarms to act as a reminder.
Menu functions
Calendar (Menu 7.2)
Viewing a memo
1. Select a date which has memos on the calendar.
If more than one memo exists, they will display in
order of their alarm times.
2. Press [Left] or [Right] to access the other memos
scheduled for the selected day.
51
Menu functions
Using calendar memo options
While viewing a memo, press <Options> to access
the following options:
• New: add a new memo.
• Edit: edit the selected memo.
• Alarm: set an alarm for the memo.
• Delete: delete the memo.
• Copy to: copy the memo to another date.
• Move to: change the date of the memo.
Time & Date (Menu 7.3)
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in World time.
• Set time: enter the current time.
• Set date: enter the current date.
• World time: set your local time zone and find out
what time it is in another part of the world.
52
To apply daylight savings time to time zones,
press <Options> and select Set daylight
saving time.
•
Time format: select 12-hour or 24-hour time
format.
Calculator (Menu 7.4)
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press <.()> to insert a decimal point or a
bracket.
• Press [ ] or [ ] to move the cursor.
2. Press the Navigation keys to access the math
function you want.
3. Enter the second number.
4. Press [ ] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
To do list (Menu 7.5)
Use this menu to create tasks and manage them.
Creating a task
Press <New>.
Enter a task and press <OK>.
Select a priority level.
Enter your deadline and press [
].
When you access the To do list menu, the tasks
display with a check mark, if the task has been done,
and a priority level indicator;
for High,
for
Normal, and
for Low.
You can change the status of a specific task by
pressing [ ].
While viewing a task, press <Options> to access the
following options:
• New: add a new task.
• Mark: change the status of the selected task.
Voice memo (Menu 7.6)
Organiser (Menu 7)
Viewing the task
•
•
•
Edit: edit the task.
Sort: sort the tasks by priority or status.
Copy: copy the selected task.
Copy to calendar: copy the task to the calendar
as a memo.
Delete: delete the task.
Delete all: delete all tasks.
Exit: exit the To do list menu.
Menu functions
1.
2.
3.
4.
•
•
•
•
Use this menu to record and play voice memos.
Voice record (Menu 7.6.1)
You can record a voice memo of up to 30 seconds.
1. Press <Record> to start recording.
2. Speak into the microphone.
3. When you have finished, press <Stop>. The
following options display:
• Replay: play back your memo.
• Re-record: discard the memo and record
another one.
53
Menu functions
•
•
Save: save the memo.
Quit: cancel your recording and exit the Voice
record menu.
4. Select Save to save the voice memo.
5. Enter a name of the voice memo and press <OK>.
Memo list (Menu 7.6.2)
You can access the list of voice memos you have
recorded.
Press <Options> to access the following options:
• Play: play the selected voice memo.
• Send: send the voice memo as part of an MMS
message.
• Rename: change the file name.
• Information: access the file properties.
• Delete: delete the voice memo.
Delete all (Menu 7.6.3)
You can delete all of the voice memos you have
recorded at one time.
54
Memory status (Menu 7.6.4)
You can check the total amount of memory currently
in use for storing voice memos and the number of
voice memos.
Currency exchange (Menu 7.7)
Use this menu to do currency conversions.
1. Enter the rate of foreign currency and press
<OK>.
2. Enter the amount of the source currency you want
to convert and press <OK>.
The amount you entered and its equivalent value
in the foreign currency display.
FM Radio
(Menu 8)
Use this menu to listen to music or news via the FM
radio on your phone.
Turning on and listening to the radio
FM Radio (Menu 8)
First, you must connect your phone with the headset,
which serves as a radio antenna.
1. Plug the connector of the supplied headset into the
jack on the right side of the phone.
2. From the FM Radio screen, press <Options> and
select Power on/off → On.
3. Press [Left] or [Right] to find the radio station you
want.
You can also press and hold [Left] or [Right] to
scan through available radio stations.
4. To exit the FM Radio menu without turning off the
radio, press [ ]. This enables you to access other
functions while listening to the radio.
You can store your favourite radio stations to quickly
access them without searching through noisy
frequencies.
1. Connect the headset to the phone and turn on the
radio.
2. Select an empty location and select Add.
3. Enter a title for the station you want and press
<OK>.
4. Enter the frequency of the station and press
<OK>.
5. Select a location in which you want to store the
station.
6. Repeat from step 2 to store other stations.
Menu functions
To access this menu, press <Menu> in Idle mode and
select FM radio, or press [Down].
Setting up a radio station list
To listen to the stored stations, press [Up] or [Down]
from the FM Radio screen.
Turning off the radio
To turn off the radio, press <Options> from the radio
screen and select Power on/off → Off, or disconnect
the headset.
55
Menu functions
56
Using radio options
Phone settings
On the FM radio screen, press <Options> to access
the following options:.
• Power on/off: turn the radio on or off.
• Add: store a radio station.
• Edit: edit the title or frequency for a saved radio
station.
• Self tuning: let the phone automatically scan
through and save available radio stations.
• Remove: remove the selected station or all
stations.
• Pop-up alert: set the phone to alert you to listen
to the radio at a specified time. When the pop-up
notification appears on the screen, press
<Accept> to turn on the specified radio station.
• Settings: change the radio settings.
Volume: select the radio volume.
Mode: change the audio mode to the phone’s
speaker or headset.
The Phone settings menu provides you with various
setting options to customise the phone to your
preferences and needs. You can also reset the settings
to their default status.
(Menu 9)
To access this menu, press <Menu> in Idle mode and
select Phone settings.
Infrared activate (Menu 9.1)
Use this menu to receive data from IrDA-compatible
computers or phones through the infrared port.
Connecting with a computer
Select With PC to use the IrDA feature with a
computer.
To use an infrared connection, you must:
• configure and activate an IrDA-compliant infrared
port on your PC.
• activate the infrared feature on the phone; the
IrDA icon ( ) appears on the top line of the
display.
•
align the IrDA port on the phone with the IrDA port
on your phone computer or another phone.
Receiving Phonebook data from another
phone
1. Align the IrDA ports on both phones with each
other.
2. Select With other phone from the Infrared
activate menu.
3. When the list of the received data displays, select
one of the two options:
Sending your Phonebook to another phone
1. Align the IrDA ports on both phones with each
other.
2. Access Phonebook → Search.
3. Select a name.
4. Scroll to a number or e-mail address.
5. Press <Options> and select Send via IrDA.
6. Select a sending option.
57
Phone settings (Menu 9)
If there is no communication between your phone and
the IrDA-compliant device within 30 seconds
activating the feature, it is automatically deactivated.
Otherwise, select Discard to delete the data.
To save all data:
a. From the item list, press <Options> to select
one of the following options:
• Save all vCard: save all Phonebook entries.
• Discard all vCard: delete all Phonebook
entries.
b. Press <Save> to save the entries.
Menu functions
The connection is ready for data transmission.
To save an individual item:
a. Select the item you want from the list.
b. Press <Options> and select Save to save the
data.
Menu functions
•
•
Selected data: send the selected number.
All data: send all of the numbers and e-mail
addresses in the name.
The number is sent to the other phone.
Deactivating the infrared port
To end the IrDA connection and deactivate the infrared
port, select Deactivate IrDA from the Infrared
activate menu.
Display settings (Menu 9.2)
Use this menu to change settings for the display and
light.
Wallpaper (Menu 9.2.1)
You can change the background image and the
settings for the text of Idle mode.
• Wallpaper list: select a background image.
• Text display: determine the phone displays the
time and date.
• Text colour: select a text colour.
Brightness (Menu 9.2.2)
You can adjust the brightness of the display for
varying lighting conditions.
Contrast (Menu 9.2.3)
You can adjust the contrast of the brightness for the
main display and external display. Adjust this setting
with the display brightness to see the display clearly in
different lighting conditions.
58
Own number (Menu 9.4)
You can select the length of time the backlight or
display stays on.
• Backlight on: select the length of time the
backlight stays on.
• Backlight dim: select the length of time the
display is in Dim mode after the backlight turns off.
After a specified time, the display turns off.
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Use this menu to set the phone to display a graphic
icon instead of your service provider’s logo on the idle
screen. This is only available if a graphic icon has been
received in a message.
Dialling font colour (Menu 9.2.6)
Use this menu to select a font colour for the numbers
entered while dialling.
Greeting message (Menu 9.3)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Language (Menu 9.5)
Use this menu to select one of several languages for
the display text. If you select Automatic, the phone
uses the same language as the SIM card.
Phone settings (Menu 9)
Graphic logo (Menu 9.2.5)
Menu functions
Backlight (Menu 9.2.4)
Security (Menu 9.6)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three times in
succession, the SIM card is blocked. To unblock it,
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
59
Menu functions
PIN check (Menu 9.6.1)
Privacy (Menu 9.6.5)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Change PIN (Menu 9.6.2)
Use this menu to lock your media content, including
MMS messages, voice memos, images, and sounds.
1. Press [ ] to select the items to be locked.
2. Press <OK> to lock the marked items.
3. Enter the phone password and press <OK>.
Use this menu to change your PIN. The PIN check
feature must be enabled to change the PIN.
To access a locked item, you need to enter the phone
password.
Phone lock (Menu 9.6.3)
SIM lock (Menu 9.6.6)
Use this menu to lock the phone from unauthorised
use. When this feature is enabled, you must enter a 4to 8-digit phone password each time the phone is
switched on.
This menu allows your phone to work only with the
current SIM by assigning a SIM lock code. You must
enter the SIM lock code to use a different SIM card.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.6.4)
Use this menu to change your phone password.
60
FDN mode (Menu 9.6.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Short cut (Menu 9.9)
If supported by your SIM card, the Change PIN2
feature changes your current PIN2.
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to change the shortcut assignments for
[Up], [Left], and [Right]. [Down] is fixed as a shortcut
to FM Radio.
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
Extra settings (Menu 9.7)
Volume key (Menu 9.8)
Use this menu to set whether the phone mutes the call
ringer or rejects a call if you press and hold [ / ]
when a call comes in.
Reset settings (Menu 9.0)
Phone settings (Menu 9)
You can turn the automatic redialling or answering
feature on or off.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
• Active folder: answer an incoming call by opening
the phone.
• Anykey answer: answer an incoming call by
pressing any key, except <Reject> or [ ].
Menu functions
Change PIN2 (Menu 9.6.8)
Use this menu to reset the phone to its default
settings.
Enter the 4- to 8-digit phone password and press
<OK>.
The password is preset to 00000000. You can
change this password. p. 60
61
Solve problems
Help and personal needs
To save the time and expense of an unnecessary
service call, perform the simple checks in this section
before contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM card”
• Be sure that the SIM card is correctly installed.
“Phone locked”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
62
“Enter PUK”
• The PIN code has been entered incorrectly three
times in succession, and the SIM card is now
blocked. Enter the PUK supplied by your service
provider.
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([ ]
pressed for more than one second.)
• Be sure that you are accessing the correct cellular
network.
• Be sure that you have not set an incoming call
barring option.
•
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
The battery doesn’t charge properly or the phone
sometimes turns itself off
• Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
No number is dialled when you re-call a
Phonebook entry
• Use the Search menu to ensure the number has
been stored correctly.
• Re-store the number, if necessary.
Solve problems
The phone starts beeping and “Warning Low
battery” flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
Try moving the phone slightly or moving closer to a
window if you are in a building.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
63
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver.
It is designed and manufactured to not exceed the
limits for exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part
of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines were developed by independent scientific
organisations through the periodic and thorough
evaluation of scientific studies. The limits include a
substantial safety margin designed to ensure the
safety of all persons, regardless of age and health.
The exposure standard for mobile phones employs a
unit of measurement known as Specific Absorption
Rate (SAR). The SAR limit recommended by the EU
Council is 2.0W/kg.*
The highest SAR value for this model phone was
0.578W/kg.
64
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone
while operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the closer
you are to a base station, the lower the power output
of the phone.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health
and safety of the user and any other person.
* The SAR limit for mobile phones used by the public is 2.0 watts/
kilogram (W/kg) averaged over ten grams of body tissue. The
limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations
in measurements. The SAR values may vary, depending on
national reporting requirements and the network band.
Precautions when using batteries
•
•
•
•
•
•
Use only Samsung-approved batteries, and
recharge your battery only with Samsungapproved chargers. Disconnect the charger from
the power source when it is not in use. Do not
leave the battery connected to a charger for more
than a week, since overcharging may shorten its
life.
Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
Do not leave the battery in hot or cold places
because the capacity and lifetime of the battery
will be reduced. Try to keep the battery at room
temperature. A phone with a hot or cold battery
may not work temporarily, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0°C (32°F).
Health and safety information
•
•
Never use a charger or battery that is damaged in
any way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base
station, it uses less power. Talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
Battery charging time depends on the remaining
battery charge, the type of battery, and the
charger used. The battery can be charged and
discharged hundreds of times, but it will gradually
wear out. When the operation time is noticeably
shorter than normal, it is time to buy a new
battery.
If left unused, a fully charged battery will
discharge itself over time.
65
Health and safety information
•
•
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a
coin, clip or pen causes a direct connection
between the + and – terminals of the battery
(metal strips on the battery). For example, do not
carry a spare battery in a pocket or bag where the
battery may contact metal objects. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user must
uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone while driving, follow
local regulations in the country or region you are in.
66
Operating environment
Remember to follow any special regulations in force in
the area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your ear with
the antenna pointing over your shoulder).
Electronic devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may wish to consult your hearing aid manufacturer to
discuss alternatives.
Other medical devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining
this information.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do
so.
Vehicles
Health and safety information
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These
recommendations are consistent with the independent
research and recommendations of Wireless Technology
Research. If you have any reason to suspect that
interference is taking place, switch off your phone
immediately.
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially explosive environments
Switch off your phone when in any area with a
potentially explosive atmosphere, and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
67
Health and safety information
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded
of the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations
are in progress.
To make or receive calls, the phone must be switched
on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless
phone networks or when certain network services and/
or phone features are in use. Check with local service
providers.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include the
areas below decks on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum
gas, such as propane or butane, areas where the air
contains chemicals or particles, such as grain, dust or
metal powders, and any other area where you would
normally be advised to turn off your vehicle engine.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [ ].
Emergency calls
This phone, like any wireless phone, operates using
radio signals, wireless, and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore, you
should never rely solely on any wireless phone for
essential communications like medical emergencies.
68
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
Other important safety information
•
Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty installation
or service may be dangerous and may invalidate
any warranty applicable to the device.
•
•
•
•
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep your phone and all its parts and accessories
out of the reach of small children and pets. They
may inadvertently damage these things or choke
on small parts.
• Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
Health and safety information
•
Check regularly that all wireless phone equipment
in your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as
the phone, its parts, or accessories.
For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including installed or portable
wireless equipment, in the area over the air bag or
in the air bag deployment area. Improperly
installed wireless equipment could result in serious
injury if the air bag inflates.
Switch off your phone before boarding an aircraft.
It is dangerous and illegal to use wireless phones
in an aircraft because they can interfere with the
operation of the aircraft.
Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
69
Health and safety information
•
•
•
•
•
•
70
Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone’s electronic circuit
boards.
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in a mild soap-andwater solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices,
such as a microwave oven, stove, or radiator. The
phone may explode when overheated.
When the phone or battery gets wet, the label
indicating water damage inside the phone changes
colour. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even
if the warranty for your phone has not expired.
•
•
•
If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may
cause damage to their eyes.
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
Index
A
ABC mode, text input • 19
Active folder • 61
Alarm • 50
Answering
call • 23
second call • 24
Anykey answer • 61
Auto redial • 61
B
Background image • 58
Backlight, set • 59
Band selection • 34
Barring, calls • 32
Battery
charging • 7
low indicator • 8
precautions • 65
Brightness, display • 58
Broadcast messages • 40
Browser, web • 45
C
Calculator • 52
Calendar • 51
Call cost • 31
Call records
dialled • 30
missed • 29
received • 30
Call time • 30
Caller group
editing • 27
searching • 27
Caller ID • 33
Calls
answering • 23
barring • 32
diverting • 31
holding • 24
making • 22
redialling • 22
rejecting • 23
waiting • 32
CB (Cell Broadcast) messages •
40
Characters, enter • 19
Connection tone • 36
Contrast, display • 58
Creating messages
MMS • 42
SMS • 37
CUG (Closed User Group) • 33
Currency converter • 54
layout • 10
settings • 58
Diverting calls • 31
DTMF tones, send • 25
D
E
Date, set • 52
Deleting
calendar memos • 52
call records • 30
downloaded items • 49
MMS • 41, 42, 43
phonebook • 26, 28
SMS • 36, 43
tasks • 53
voice memos • 54
Delivery reports, message • 44
Dialled calls • 30
Dialling font, set • 59
Display
backlight, set • 59
brightness • 58
contrast • 58
icons • 10
language • 59
Emergency calls • 68
Emoticons • 38
F
FDN (Fixed Dialling Number)
mode • 60
FM radio • 55
Folder tone • 35
Funbox • 45
G
Games • 48
Greeting message • 59
H
Health and safety • 64
Holding, call • 24
I
Icons, description • 10
Images, downloaded • 49
71
Index
Inbox, messages
MMS • 41
SMS • 36
Infrared port • 56
International calls • 22
Internet • 45
J
Java applications • 48
K
Keypad tones
selecting • 35
sending/muting • 25
volume • 35
L
Language, select • 59
Last number, redial • 22
Locking
media content • 60
phone • 60
SIM card • 60
Low battery indicator • 8
M
Memory status
downloaded items • 49
messages • 43
72
phonebook • 28
Message tone • 35
Messages
cell broadcast • 40
greeting • 59
MMS • 41
push • 45
SMS • 36
voice • 40
Minute minder • 35
Missed calls • 29
MMS messages
creating/sending • 42
deleting • 41, 42
setting • 44
viewing • 41
Multiparty-call • 25
N
Names
entering • 19
searching • 26
Network band, selection • 33
Network services • 31
Numbers
searching 26
storing • 26
O
Organiser • 50
Outbox, messages
MMS • 41
SMS • 36
P
Password
call barring • 32
phone • 60
Phone
care and maintenance •
69
display • 10
icons • 10
locking • 13, 60
password • 60
resetting • 61
switching on/off • 8
unpacking • 6
Phonebook
adding • 26
deleting • 26, 28
finding • 26
options • 26
speed dialling • 28
PIN, change • 60
PIN2, change • 61
Power on/off tone • 35
Privacy • 60
Problems, solve • 62
Push messages • 45
R
Radio • 55
Received calls • 30
Redialling
automatically • 61
manually • 22
Resetting phone • 61
Ringer
incoming calls • 34
messages • 35
Road safety • 66
Roaming • 33
S
Safety
information • 64
precautions • 1
SDN (Service Dialling
Numbers) • 29
Security, calls • 59
Sent messages
MMS • 41
SMS • 36
V
Voice memos • 53
Voicemail server • 40
Volume key, set • 61
W
Index
Shortcut • 13, 61
Silent mode • 13
SIM card
inserting • 7
locking • 60
SMS messages
creating/sending • 37
deleting • 36, 39
setting • 39
viewing • 36
Sound settings • 34
Sounds, downloaded • 49
Speakerphone • 25
Speed dial • 28
Switching on/off
microphone • 25
phone • 8
Waiting call • 32
Wallpaper • 58
Web browser
access • 45
bookmarks • 46
World time • 52
T
T9 mode, text input • 20
Templates
emoticon • 38
MMS • 43
SMS • 38
Text, enter • 19
Time, set • 52
73
Declaration of Conformity (R&TTE)
For the following product :
GSM900/GSM1800/GSM1900
Portable Cellular Telephone
(Product description)
SGH-X300
(Model name)
Manufactured at :
‫ ڈ‬Samsung Electronics Co., Ltd, 94-1, Imsoo-Dong, Gumi City, Kyung-Buk, Korea,
730-350
(factory name, address)
to which this declaration relates, is in conformity with the following standards and/or other normative
documents.
Safety
: EN 60950-1:2001
EMC
: EN 301 489-01 v1.4.1 (08-2002)
EN 301 489-07 v1.2.1 (08-2002)
SAR
: EN 50360:2001
EN 50361:2001
Network
: EN 301 511 v9.0.2 (03-2003)
We hereby declare that [all essential radio test suites have been carried out and that] the above named
product is in conformity to all the essential requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in Annex[ญ] of Directive
1999/5/EC has been followed with the involvement of the following Notified Body(ies):
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark:
0168
The technical documentation kept at :
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park,Saxony Way,
Yateley, Hampshire,GU46 6GG, UK
2006.02.06
(place and date of issue)
Yong-Sang Park / S. Manager
(name and signature of authorized person)
ଖ It is not the address of Samsung Service Centre. For the address or the phone number of Samsung
Service Centre, see the warranty card or contact the retailer where you purchased your phone.
* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-09035A
English (EU). 03/2006. Rev. 1.0
Download PDF