Samsung | SGH-E800 | Samsung SGH-E800 User Manual

* Some of the contents in this manual may differ from your
phone, depending on the software installed or your
service provider.
GPRS TELEPHONE
SGH-E800
Printed in Korea
World Wide Web
http://www.samsungmobile.com
Code No.: GH68-05349A
English. 11/2004. Rev. 1.1
E800English_ORA.book Page 2 Thursday, July 1, 2004 5:49 PM
2
E800English_ORA.book Page 3 Thursday, July 1, 2004 5:49 PM
Contents
Important safety precautions ...................... 7
Unpacking .................................................... 9
Your phone ................................................ 10
Phone layout......................................................
Display..............................................................
Backlight ...........................................................
Service display...................................................
Homescreen menu .............................................
Camera .............................................................
Built-in antenna .................................................
10
14
17
17
17
18
18
Getting started........................................... 19
Inserting/Removing the SIM card .........................
Installing/Removing/Charging the battery..............
Switching the phone on or off...............................
Selecting functions and options ............................
Locking or unlocking the keypad...........................
19
20
24
25
27
Call functions ............................................. 28
Making a call......................................................
Ending a call ......................................................
Answering a call .................................................
Rejecting a call...................................................
Adjusting the volume ..........................................
Accessing options during a call .............................
Using the ear-microphone....................................
28
31
31
31
32
32
41
Entering text .............................................. 42
Changing the text input mode ..............................
Using the T9 mode .............................................
Using the ABC mode ...........................................
Using the symbolic mode .....................................
Using the number mode ......................................
43
44
46
49
49
Using the menus ........................................ 50
Accessing a menu function................................... 50
List of menu functions ......................................... 51
3
E800English_ORA.book Page 4 Thursday, July 1, 2004 5:49 PM
Contents
Contacts menu ........................................... 57
Find name .........................................................
Add entry ..........................................................
Speed list .........................................................
Copy all to phone ...............................................
Send all via infrared............................................
Delete all...........................................................
Own number......................................................
Group setting.....................................................
Memory status ...................................................
Service directory ................................................
57
60
61
63
64
66
67
68
69
69
Call history................................................. 70
Missed calls .......................................................
Received calls ....................................................
Dialled calls .......................................................
Delete all...........................................................
Call time ...........................................................
Call costs ..........................................................
70
70
71
71
72
72
Games .................................................... 74
Applications ......................................................
More games.......................................................
Internet settings ................................................
Memory status ...................................................
74
77
77
78
Phone settings ........................................... 79
Sound settings ...................................................
Display..............................................................
Language ..........................................................
Security ............................................................
Network services ................................................
Others ..............................................................
Reset settings ....................................................
79
83
84
85
88
95
98
Camera ...................................................... 99
Take photos....................................................... 99
My photos ....................................................... 105
My albums....................................................... 105
Delete all......................................................... 106
Settings .......................................................... 106
Memory status ................................................. 107
4
E800English_ORA.book Page 5 Thursday, July 1, 2004 5:49 PM
Contents
Messages ................................................. 108
Text messages ................................................
Photo messages ...............................................
Push messages ................................................
Preset messages ..............................................
Answer phone ..................................................
Broadcast ........................................................
Settings ..........................................................
Memory status ................................................
108
115
126
127
127
128
130
133
WAP ......................................................... 135
Home..............................................................
Bookmark........................................................
Go to URL........................................................
Clear cache......................................................
Proxy settings ..................................................
Current proxy ..................................................
135
138
139
139
139
141
SAT (SIM Application Toolkit) .................. 142
Media album ............................................ 143
Photos ...............................................................
Images ...........................................................
Sounds ...........................................................
Delete all.........................................................
Memory status .................................................
143
144
144
145
146
Calendar .................................................. 147
New memo ......................................................
Calendar .........................................................
To do list .........................................................
Clock ..............................................................
Alarm .............................................................
Calculator........................................................
Conversion ......................................................
Timer..............................................................
Stopwatch .......................................................
147
149
152
153
155
157
158
159
160
5
E800English_ORA.book Page 6 Thursday, July 1, 2004 5:49 PM
Contents
Using ALS (Alternate Line Service) .......... 161
Solving problems ..................................... 163
Access codes............................................ 166
Phone password ...............................................
PIN.................................................................
PIN2 ...............................................................
PUK ................................................................
PUK2 ..............................................................
Call barring password........................................
166
166
167
167
167
168
Health and safety information.................. 169
SAR certification information ..............................
Precautions when using batteries........................
Road safety .....................................................
Operating environment .....................................
Electronic devices .............................................
Potentially explosive atmospheres.......................
Emergency calls ...............................................
Other important safety information .....................
Care and maintenance ......................................
169
170
172
172
173
174
175
176
177
Glossary ................................................... 179
Index ....................................................... 183
Quick reference card ................................ 187
6
E800English_ORA.book Page 7 Thursday, July 1, 2004 5:49 PM
Important safety
precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road safety at all times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching off in aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching off in hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
E800English_ORA.book Page 8 Thursday, July 1, 2004 5:49 PM
Important safety precautions
Sensible use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on, especially the phone is in
service.
Emergency call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
then press the
key. If certain features are in
use, deactivate those features before you can make
an emergency call. Give all the necessary
information as accurately as possible. Do not cut off
the call until given permission to do so.
Water resistance
Your phone is not water-resistant. Keep it dry.
Accessories and batteries
Use only Samsung-approved accessories and
batteries.
Qualified service
Only qualified service personnel may install or
repair your phone.
For more detailed safety information, see “Health
and safety information” on page 169.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS
8
E800English_ORA.book Page 9 Thursday, July 1, 2004 5:49 PM
Unpacking
Your package contains the following items:
Phone
Travel Adapter
Battery
Owner’s Manual
Note: The items supplied with your phone may be
different depending on the country.
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
• Advanced handsfree car kit
• Simple handsfree car kit
• PC data link kit
• Headset
9
E800English_ORA.book Page 10 Thursday, July 1, 2004 5:49 PM
Your phone
Phone layout
The following illustrations show the main elements
of your phone:
(Reverse side)
Camera
Flash
Mirror
Earpiece
Display
Navigation keys
(Up/Down/Left/
Right)
Soft key (left)
Volume keys
Homescreen
menu key
Dial/Menu
confirmation key
Cancel/Back/
Correction key
Special
function keys
Power On/Off /
Menu exit key
Soft key (right)
Ear-microphone
jack
Camera key
Alphanumeric
keys
IrDA port
Microphone
10
E800English_ORA.book Page 11 Thursday, July 1, 2004 5:49 PM
Your phone
h
Key(s)
(soft keys)
Description
Perform the functions indicated by the
text above them, on the bottom line of
the display.
In Menu Mode, scroll through the
menu options.
In Idle Mode, the Left and Right keys
enter the Homescreen Menu (page 17)
at the bottom of the screen and the Up
and Down keys enter the Find name
in the Contacts menu.
In Homescreen Menu Mode, the Left
and Right keys scroll through the
menu options and Up and Down keys
enter the Find name in the Contacts
menu.
In Idle Mode, enters the Homescreen
Menu (page 17) when you short press.
Or launches the WAP (Wireless
Application Protocol) browser directly
when you long press.
In Homescreen Menu Mode, accesses
each menu option.
Makes or answers a call.
In Idle Mode, accesses the call log list.
In Menu Mode, selects a menu function
or stores information that you have
entered, such as a name in the phone
or SIM memory.
11
E800English_ORA.book Page 12 Thursday, July 1, 2004 5:49 PM
Your phone
Key(s)
Description (continued)
Deletes characters from the display.
When pressed and held in Idle Mode,
quickly accesses the New memo
screen.
In Menu Mode, returns to previous
menu.
Ends a call.
When pressed and held, switches the
phone on or off.
In Menu Mode, cancells your input and
returns to Idle Mode.
When pressed and held in Idle Mode,
quickly accesses your answer phone
server.
Enter numbers, letters and some
special characters.
Used for various purposes in different
functions.
When pressed and held while entering
a phone number, the
key enters a
pause.
When pressed and held in Idle Mode,
the
key enters or exits the Quiet
Mode.
12
E800English_ORA.book Page 13 Thursday, July 1, 2004 5:49 PM
Your phone
Key(s)
Description (continued)
(on the left side of the phone)
During a call, adjust the earpiece
volume.
In Idle Mode, adjust the key tone
volume.
In the capture mode, flip the picture
vertically by pressing the volume up
key and horizontally by pressing the
volume down key.
(on the right side of the phone)
When pressed and held, turns the
camera capture mode on. In capture
mode, works as a camera shutter.
13
E800English_ORA.book Page 14 Thursday, July 1, 2004 5:49 PM
Your phone
Display
Display layout
The display has three areas:
Icons
Text and
graphic area
Menu
Contacts
Soft keys
Indications
Area
Description
First line
Displays various icons. See
page 15.
Middle lines
Display messages, instructions
and any information that you
enter, such as number to be
dialled.
Last line
Shows the functions currently
assigned to the two soft keys.
14
E800English_ORA.book Page 15 Thursday, July 1, 2004 5:49 PM
Your phone
Icons
Icon
Description
Shows the received signal strength. The
more the number of bars, the stronger
the signal.
Appears when a call is in progress.
Appears when you are out of a service
area. When it displays, you cannot make
or receive calls.
Appears when you have new or
unchecked voice messages. When your
SIM card supports ALS (Alternate Line
Service), this icon may appears like
,
,
.
Appears when you have new or unread
messages.
Appears when you have new or
unchecked photo messages.
Appears when you are retrieving a photo
message.
Appears when you are sending a photo
message.
Appears when you set the alarms to ring
at a specified time.
Appears when the IrDA port is active. For
details, see page 97.
Appears when you connect the phone to
the computer by the IrDA port.
15
E800English_ORA.book Page 16 Thursday, July 1, 2004 5:49 PM
Your phone
Icon
Description (continued)
Appears when you are connected to the
GPRS network.
Appears when your SIM card supports the
Call diverting status indication and the
Call diverting feature is activated. When
your SIM card supports ALS (Alternate
Line Service), this icon may appears with
the number 1, 2, or both. For example:
,
,
.
Appears when you are at the home zone.
(May be shown only if your service provider
supports this feature)
Appears when you are at the office zone.
(May be shown only if your service provider
supports this feature)
Appears when you set the alert type for
incoming calls to Vibration or Vibration
then melody. For further details, see
page 80.
Appears when the Quiet Mode is active.
Shows the level of your battery. The more
bars you see, the more power you have
left.
16
E800English_ORA.book Page 17 Thursday, July 1, 2004 5:49 PM
Your phone
Backlight
The display and the keypad are illuminated by a
backlight. When you press any key, the backlight
illuminates. It turns off if you don’t press any key
within a given period of time, depending on the
Backlight menu option. For further details, see
page 84.
Service display
The service display works when the LCD turns off
and you are in a service area. The service light’s
activity depends on the Service display menu
option. See page 84.
Homescreen menu
The homescreen menu appears at the bottom of
screen in Idle Mode. You can enter the homescreen
Menu by pressing the Left, Right and homescreen
menu keys and access each menu option by
pressing the homescreen menu key. The
Homescreen menu consists of the WAP browser, call
history, creating text messages and take photos
menu options.
17
E800English_ORA.book Page 18 Thursday, July 1, 2004 5:49 PM
Your phone
Camera
The camera embedded in your phone allows you to
take a picture of people or events while on the
move.
For further details about using the Camera feature,
see page 99.
(Reverse side)
Built-in antenna
Your phone has a built-in antenna. As with other
mobile radio transmitting equipment, do not touch
the antenna unnecessarily when the phone is
switched on. Contact with the antenna affects call
quality and may cause the phone to operate at a
higher power level than needed.
18
E800English_ORA.book Page 19 Thursday, July 1, 2004 5:49 PM
Getting started
Inserting/Removing the SIM card
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
• Keep all miniature SIM cards out of the reach of
small children.
• The SIM card and its data can be easily damaged
by scratches or bending, so be careful when
handling, inserting or removing the card.
• When installing the SIM card, always make sure
that the phone is switched off before you remove
the battery.
Inserting the SIM card
1. If necessary, remove the battery by referring to
page 21.
2. Insert and slide the SIM card under the tab,
ensuring that the notched corner is top left and
the gold contacts of the card face into the
phone.
19
E800English_ORA.book Page 20 Thursday, July 1, 2004 5:49 PM
Getting started
Removing the SIM card
To remove the SIM card, slide the card out of the
holder, as shown.
Installing/Removing/Charging the
battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
standard battery is fully recharged in
approximately 130 minutes.
Installing the battery
1. Insert the teeth on the bottom of the battery
into the corresponding slots on the phone..
20
E800English_ORA.book Page 21 Thursday, July 1, 2004 5:49 PM
Getting started
2. Press the battery against the back of the phone
until it clicks into place.
Removing the battery
1. Switch off the phone by pressing and holding the
key.
2. To remove the battery, pull the battery catch
toward the top of the phone and hold it in that
position. Lift the battery away from the phone.
21
E800English_ORA.book Page 22 Thursday, July 1, 2004 5:49 PM
Getting started
Charging the battery by using the travel
adapter
Note: The phone can be used while the battery is
being charged, but this causes the battery to
charge more slowly.
1. Plug the connector of the travel adapter into the
jack at the bottom of the phone.
Check that the arrow on the connector is facing
towards the front of the phone.
2. Plug the adapter into a standard AC wall outlet.
While charging, the battery icon at the top righthand corner of the display repeatedly fills to
show that the battery is charging.
22
E800English_ORA.book Page 23 Thursday, July 1, 2004 5:49 PM
Getting started
3. When charging is finished, disconnect the
adapter from the power outlet and from the
phone by pressing the grey tabs on both sides of
the connector and pulling the connector out.
Low battery indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor informs you in
the following ways: an empty battery icon flashes
(
), you hear a warning tone and a message
repeats at regular intervals on the display.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
23
E800English_ORA.book Page 24 Thursday, July 1, 2004 5:49 PM
Getting started
Switching the phone on or off
To switch the phone on:
1. Hold down the
switches on.
key until the phone
2. If the phone asks for a PIN, enter the PIN and
press the Ok soft key. For further details, see
page 166.
The phone searches for your network and the
current date and time appear on the display.
After finding it, you can make or receive a call.
Note: To change the language, use the
Language menu option. For further
details, see page 84.
To switch the phone off:
Hold down the
key until the power-off
animation displays.
24
E800English_ORA.book Page 25 Thursday, July 1, 2004 5:49 PM
Getting started
Selecting functions and options
Your phone offers a set of functions that allow you
to customise your phone. These functions are
arranged in menus and sub-menus, accessed via
the two soft keys marked
and
Each menu
and sub-menu allows you to view and alter the
settings of a particular function.
The roles of the soft keys vary according to the
current context; the labels or icons on the bottom
line of the display and just above the soft keys
indicate their current roles.
Example:
Press the left soft
key to access the
menu functions.
Press the right soft key
to access the Contacts
feature.
25
E800English_ORA.book Page 26 Thursday, July 1, 2004 5:49 PM
Getting started
To view various functions/options available or select
the one is required:
1. Press the appropriate soft key.
2. To
select the:
• function displayed
• option highlighted
Press the
Select soft key.
view the next function or Down key.
highlight the next option
on a list
move back to the
previous function or
option on a list
Up key.
move back up one level
in the structure
(or Back) soft
key or C key.
return to Idle Mode
key.
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the Ok soft key.
26
E800English_ORA.book Page 27 Thursday, July 1, 2004 5:49 PM
Getting started
Locking or unlocking the keypad
You can lock the soft keys, navigation keys,
homescreen menu key, volume keys and camera
key to avoid pressing keys by accident.
To lock the keys, slide the folder down.
If you set the Stop operation option in the Slide
down operation menu (see page 96), the phone
locks the keys automatically when you slide the
folder down.
Otherwise, if you set the Continue operation
option in the Slide down operation menu (see
page 96), the confirming message appears on the
display when you slide the folder down in the Idle
Mode. In the message, you can lock the keys by
pressing the Yes soft key. If you don't press the
Yes or NO soft keys in the confirming message, the
phone locks the keys after a little while.
To unlock the keys, slide the folder up or press the
Unlock soft key and then press the OK soft key
again.
Note: the missed calls or text messages display when
you long press the Unlock soft key.
27
E800English_ORA.book Page 28 Thursday, July 1, 2004 5:49 PM
Call functions
Making a call
Using the number keypad
When the idle screen is displayed, enter the area
code and phone number, and press the
key.
Note: If you have set the Auto redial option to On,
the number is redialled automatically up to ten
times if the person you called does not answer
or the line is busy. For further details, see
page 95.
Correcting the number
To clear
Press the
the last digit
displayed
C key.
any other digit in
the number
Navigation keys until the
cursor (|) is immediately to
the right of the digit to be
cleared and press the C key.
You can also insert a missing
digit simply by pressing the
appropriate key.
the all digits
displayed
C key and hold it down for
more than one second.
28
E800English_ORA.book Page 29 Thursday, July 1, 2004 5:49 PM
Call functions
Making an international call
1. Press and hold the 0 key for the international
prefix. The + character appears.
2. Enter the country code, area code and phone
number and press the
key.
Making a call from Contacts
You can store the names and phone numbers called
regularly in the SIM card and phone’s memory,
which are jointly called the Contacts. You then do
not need to remember all your numbers; simply
select the required name to recall the associated
number.
For further details about the Contacts feature, see
page 57.
Using the call logs
The phone stores up to 20 calls dialled, received or
missed chronologically. The last call is saved in the
first position. If the same number occurs more than
once, only the latest occurrence is saved.
To recall any of these numbers:
1. Press the
log list.
key in Idle Mode to access the Call
2. Use the Up and Down keys to scroll through the
list until the number you want highlights.
The call logs are listed with the following icons:
•
: Dialled calls
•
: Received calls
•
: Missed calls
29
E800English_ORA.book Page 30 Thursday, July 1, 2004 5:49 PM
Call functions
3. To dial the number, press the
key.
To view each call record, see “Call History” on
page 70.
Viewing missed calls
If you have a subscription that includes the Caller
Line Identification (CLI) feature and you are unable
to answer a call for any reason, you can find out
who was calling you so that you can call the person
back.
The number of missed calls displays on the idle
screen immediately after a call was missed.
To view the missed calls immediately:
1. Press the Missed soft key.
The list of the missed calls displays.
2. If necessary, scroll to the number you want by
pressing the Up or Down key.
3. To dial the number, press the
key.
To use the missed call options, see “Missed Calls” on
page 70.
Note: To clear the missed call notification on the
display, press the
key. When you also
have voice mails (answer phone), text
messages or photo messages and multi CBs,
the right soft key indication changes in the
following order: Missed, Connect, View, CB
and Contacts
30
E800English_ORA.book Page 31 Thursday, July 1, 2004 5:49 PM
Call functions
Speed-dialling from Contacts
Once you have stored numbers in the Contacts, you
can dial a number simply by pressing one or two
keys. For further details, see page 61.
Ending a call
When you want to finish your call, briefly press the
key or slide the folder down.
Answering a call
When somebody calls you, the phone rings and
displays the incoming call animation.
If the caller can be identified, the caller’s phone
number, or name if stored in your Contacts,
displays.
To answer a call, press the
key or Accept soft
key. Or, slide the folder up when the Active slide
option is set to on.
Note: You can answer a call while using the Address
or menu features. The current operation stops.
Rejecting a call
To reject an incoming call, press the
key or
Reject soft key. Or, slide the folder down.
31
E800English_ORA.book Page 32 Thursday, July 1, 2004 5:49 PM
Call functions
Adjusting the volume
During a call, if you wish to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
When you hear a sound, such as ringtone, you can
also adjust the earpiece volume. But it is not fixed.
Note: When the folder is slid down and a call comes
in, you can mute the call ringer by pressing and
holding one of the volume keys.
Accessing options during a call
Your phone provides a number of control functions
that you can use during a call.
Using the loudspeaker
You can speak and listen to the phone from a short
distance without holding the phone to your ear.
Turn on / off the loudspeaker
1. Press the Options soft key.
2. Press the Up or Down key to highlight the Loud
spk. on / Loud spk. off option. Press the
Select soft key.
CAUTIONS: Do not hold the phone near to your
ear when you use the loudspeaker. Because the
volume may be extremely loud.
32
E800English_ORA.book Page 33 Thursday, July 1, 2004 5:49 PM
Call functions
Switching the microphone off (Mute)
You can temporarily switch your phone’s
microphone off so that the other person cannot
hear you.
Example: You may wish to say something to
another person in the room but do not
want the calling person to hear you.
1. Press the Options soft key.
2. When Mute highlights, press the Select soft
key.
The Mute icon (
) appears on the bottom line
of the display and your correspondent can no
longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. When Unmute highlights, press the Select soft
key.
The Mute icon disappears and your
correspondent can hear you.
Searching for a number in Contacts
You can search for a number in your Contacts
during a call.
1. Press the Options soft key.
2. If necessary, press the Up or Down key to
highlight the Contacts option. Press the Select
soft key.
33
E800English_ORA.book Page 34 Thursday, July 1, 2004 5:49 PM
Call functions
3. Select the Find name option and press the
Select soft key.
The Contacts entries are listed.
4. Enter the first a few letters of the name that you
want to find.
The Contacts entries are listed starting with the
first entry matching your input.
Note: You can also scroll through the Contacts
from the beginning, by pressing the Up or
Down key.
5. To view the highlighted entry, press the Ok soft
key.
For further details about the Contacts feature,
see page 57.
Muting/Sending key tones
You can turn the key tones off or on during a call.
When the Mute keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
To communicate with answering machines or
computerised telephone systems, the Send keys
option must be selected.
Sending DTMF tones
You can send the DTMF(Dual Tone Multi-Frequency)
tones of the number on the display during a call.
34
E800English_ORA.book Page 35 Thursday, July 1, 2004 5:49 PM
Call functions
This option is helpful for entering a password or
account number when you call an automated
system, like a banking service.
To send the DTMF tones:
1. When you are connected to the teleservice
system, press the Options soft key.
2. Press the Up or Down key to highlight the Send
DTMF option. Press the Select soft key.
3. Enter the number you want to send and press
the OK soft key.
The tones of the displayed number are sent.
Using the message service
You can read or write a new message during a call.
1. Press the Options soft key.
2. Press the Up or Down key to highlight the
Message option. Press the Select soft key.
3. To read a received message, select the Inbox
option, and then scroll to the message that you
want to read.
To write a new message, select the Create
option.
4. Press the Select soft key.
For further details about the SMS feature, see
page 108.
35
E800English_ORA.book Page 36 Thursday, July 1, 2004 5:49 PM
Call functions
Using the voiceclarity
The voiceclarity feature makes received sound loud
and clear during a call. It is useful when you are in
a noisy place.
The phone turns on the voiceclarity feature
automatically after a while when you are in a noisy
place and the voiceclarity is set to on.
Turn on / off the voiceclarity
1. Press the Options soft key.
2. Press the Up or Down key to highlight the
Voiceclarity on / Voiceclarity off option.
Press the Select soft key.
Note: You cannot activate the voiceclarity when you
use the loudspeaker and the handsfree car kit.
Using the SAT (SIM Applicatioin Toolkit)
If you use a SAT card that provides additional
services, the SAT menu displays. For further details,
see your SIM card instructions.
Putting a call on hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can switch between the
calls.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want
by pressing the Retrieve soft key.
36
E800English_ORA.book Page 37 Thursday, July 1, 2004 5:49 PM
Call functions
To make a call while you have a call in progress:
1. Enter the phone number that you want to dial or
look it up in the Contacts.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or alternatively:
1. Put the current call on hold by pressing the Hold
soft key.
2. Make the second call in the normal way.
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
To end the call on hold, press the Options soft key
and select the End held call option.
When you want to finish, end each call normally by
pressing the
key. If you want to finish all calls
at once, slide the folder down.
Answering a second call
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have activated the Call waiting
option (see page 92). You will be notified of an
incoming call by a call waiting tone.
To answer a call while you have another call in
progress:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
37
E800English_ORA.book Page 38 Thursday, July 1, 2004 5:49 PM
Call functions
2. To switch between the two calls, press the Swap
soft key.
3. To end the call on hold, press the Options soft
key and select the End held call option.
To end the current call, press the
The call on hold is continued.
key.
Transferring a call
You can transfer the current call to the call on hold
if this service is supported by the network, so that
the callers can talk to each other. You are
disconnected from both of them.
1. During a call, answer or make a call in the
normal way, and press the Options soft key.
2. Press the Up or Down key to select the Transfer
option and press the Select soft key.
The two people are connected to each other.
Making a multi-party call
A multi-party call feature is a network service that
allows up to six people to take part simultaneously
in a multi-party or conference call. For more
information, contact your service provider.
Setting up the multi-party call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
38
E800English_ORA.book Page 39 Thursday, July 1, 2004 5:49 PM
Call functions
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the Select soft key.
4. To add a new person to the multi-party call, call
the person in the normal way. Then press the
Options soft key and select the Join option.
Press the Select soft key.
You can add incoming callers by answering the call
and selecting the Join option. Repeat as needed.
Having a second call during a multi-party call
To answer a call when you have the muti-party call:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the Swap
soft key.
3. To end the call on hold, press the Options soft
key and select the End held multiparty option
or End held call option.
To end the current call, press the
The call on hold is continued.
key.
To make a call when you have the multi-party call:
See “To make a call while you have a call in
progress:” on page 37.
To answer an incoming call when you have the
multi-party call in progress and another call on
hold:
1. Press the Accept soft key.
2. Select the End held option to end the call on
hold.
39
E800English_ORA.book Page 40 Thursday, July 1, 2004 5:49 PM
Call functions
Or, select the End current option to end the call
in progress.
And then you can answer the new call.
Having a private conversation with one
participant
1. Press the Options soft key and select the Split
option. Press the Select soft key.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
Now you can talk privately with that person. The
other participants can continue to converse with
each other
3. To return to the multi-party call, press the
Options soft key and select the Join option.
4. Press the Select soft key.
All of the multi-party call participants can now
hear each other.
Removing one participant
1. Press the Options soft key and select the
Remove option.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
The call ends with that participant, but you can
continue to talk with the other participants.
3. End the multi-party call by pressing the
key.
40
E800English_ORA.book Page 41 Thursday, July 1, 2004 5:49 PM
Call functions
Using the ear-microphone
With the ear-microphone, you can make or answer
a call without holding the phone.
When you connect the ear-microphone to the jack
at the right side of the phone, the button on the
ear-microphone works as listed below:
To
Press
redial the last call
the button twice in Idle Mode.
answer a call
and hold the button when you
receive the call.
end a call
and hold the button when you
have finished the call.
41
E800English_ORA.book Page 42 Thursday, July 1, 2004 5:49 PM
Entering text
At many times while you are using your phone, you
need to enter text, such as when storing a name in
the Contacts, writing a new message, creating your
personal greeting or scheduling events on your
calendar.
You are provided with the following text input
modes:
• T9 mode*
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter – when you press the 5
key once, J, K or L may be displayed. The T9
mode automatically compares your keystrokes
with an internal linguistic dictionary to determine
the correct word, thus requiring far fewer
keystrokes than the traditional ABC mode.
• ABC mode
This mode allows you to enter letters by pressing
the key labelled with the required letter once,
twice, three or four times until the letter displays.
• Number mode
This mode allows you to enter numbers.
• Symbolic mode
This mode allows you to enter special characters.
*
42
is a registered trademark of Tegic Communications,
Inc. and is licensed under U.S. Patent 5,818,437/
5,953,541/ 6,011,554.
E800English_ORA.book Page 43 Thursday, July 1, 2004 5:49 PM
Entering text
Changing the text input mode
When you are in a field that allows characters to be
entered, you will see the text input mode indicator
at the bottom of the display.
Example: Entering a name in the Contacts
Enter name
Ok
20
Eng
Text input mode indicator:
T9 English mode
To change to another text input mode:
1. Press the right soft key indicating the current
text input mode.
2. Scroll to the mode you want to use by pressing
the Up or Down key.
The Language select option allows you to
change the text input language.
You can use the Add word option to add new
words into the T9 dictionary. See page 45.
Note: If you want to exit the menu without
changing the mode, press the
soft key or
key.
3. Press the Select soft key to confirm the
highlighted text input mode.
43
E800English_ORA.book Page 44 Thursday, July 1, 2004 5:49 PM
Entering text
Quickly changing the text input mode
To switch between the
Press and hold the
Number and previous mode
key.
Symbol and previous mode
ABC and T9 mode
key.
right soft key.
Using the T9 mode
To type a word in the T9 mode:
1. Start entering the word by pressing keys 2 to 9.
Press each key only once for each letter.
Example: To enter “hello” in the T9 mode, press
the 4, 3, 5, 5, and 6 keys.
The word you are typing appears on the display.
It may change with each key that you press.
2. Enter the whole word before editing or deleting
any keystrokes.
3. If the word is correct, start entering the next
word. Otherwise, press the 0 key repeatedly to
display alternative word choices for the keys
that you have pressed.
Example: Both “of” and “me” have the sequence
of 6 and 3. The phone displays the
most commonly used choice first.
4. Insert a space between words by pressing the
key.
5. Continue entering the next word.
44
E800English_ORA.book Page 45 Thursday, July 1, 2004 5:49 PM
Entering text
If Spell appears above the left soft key while you
are entering text, the word does not exist in the T9
dictionary. To type words not found in the T9 mode,
change the text input mode to the ABC mode, or
proceed as follows:
1. Press the Spell soft key, or press the right soft
key and select the Add word option.
2. Enter the word you want to add using the ABC
mode (see page 46) and press the Ok soft key.
The word is saved in the T9 dictionary and
inserted in the input field.
3. Continue entering other words in the T9 mode.
Smart punctuation
To enter periods, hyphens or apostrophes, press the
1 key. The T9 mode applies rules of grammar to
insert the correct punctuation.
Example: The 1 key is used twice to display two
punctuation marks.
l
e
t
‘
s
e
a
t
.
Changing the case
To change the case of the next letter(s) that you
type, press the
key. There are three cases:
• Lower Case (no indicator)
• Initial Capital (
• Capital Lock (
)
)
45
E800English_ORA.book Page 46 Thursday, July 1, 2004 5:49 PM
Entering text
Inserting a space
To insert a space between words, press the
key.
Entering a number directly
To enter a number, press and hold the number key.
Scrolling
To move the cursor to the left or right within the
text, press the Left or Right key.
Clearing letters and words
To clear the letter to the left of the cursor, press the
C key. You can clear all of the letters on the display
by pressing and holding the C key.
Returning to the previous screen
When the text input field is cleared, press and hold
the C key to return to the previous screen.
Using the ABC mode
When typing in the ABC mode, press the key
labelled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
Example: To display the letter “C”, quickly press the
2 key three times. To display the letter
“K”, press the 5 key twice. This method is
called Multi-tap typing.
46
E800English_ORA.book Page 47 Thursday, July 1, 2004 5:49 PM
Entering text
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
press the Right key or wait a few seconds for
the cursor to move to the right automatically,
and then enter the next letter.
Refer to the table for more information about the
characters available. The characters vary,
depending on the text input language. You can
select the language by setting one of the following
options:
• Language select; see page 43
• Input mode; see page 84
List of the characters available
Key
Characters in the order displayed
1
.
,
-
?
2
A
B
C
2
3
D
E
F
3
4
G
H
I
4
5
J
K
L
5
6
M N
O
6
7
P
Q
R
S
8
T
U
V
8
9
W X
Y
Z
0
0
!
‘
@
:
1
7
9
(Capital Lock mode in English)
47
E800English_ORA.book Page 48 Thursday, July 1, 2004 5:49 PM
Entering text
Changing the case
To change the case of the next letter(s) that you
type, press the
key. There are three cases:
• Lower Case (no indicator)
• Initial Capital (
• Capital Lock (
)
)
Inserting a space
To insert a space between words, press the
key.
Entering a number directly
To enter a number, press and hold the number key.
Scrolling
To move the cursor to the left or right within the
text, press the Left or Right key.
Clearing letters and words
To clear the letter to the left of the cursor, press the
C key. You can clear all of the letters on the display
by pressing and holding the C key.
Returning to the previous screen
When the text input field is empty, press and hold
the C key to return to the previous screen.
48
E800English_ORA.book Page 49 Thursday, July 1, 2004 5:49 PM
Entering text
Using the symbolic mode
The Symbolic mode enables you to enter symbols in
your text.
To
Press the
display more
symbols
Up or Down key.
enter a symbol
corresponding number key.
Ok soft key.
return to the
previous text input
mode with entered
symbol(s)
return to the
previous text input
mode without
entered symbol(s)
soft key.
Using the number mode
The Number mode enables you to enter numbers in
your text. Press the keys corresponding to the digits
you want to enter.
49
E800English_ORA.book Page 50 Thursday, July 1, 2004 5:49 PM
Using the menus
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
Accessing a menu function
The menus and sub-menus can be accessed by
pressing the Menu or Contacts soft key in Idle
Mode, then scrolling with the navigation keys.
1. In Idle Mode, press the Menu soft key to access
the main menu or press the Contacts soft key
to access Contacts menu.
2. Scroll through the menus using the navigation
keys. And then press the Select soft key if you
access the main menu.
3. Find the sub-menu that you wish to use by
scrolling with the Up or Down key.
4. Press the Select soft key to access the submenu.
If the menu that you have selected contains
further sub-menus, repeat steps 3 and 4.
5. Scroll to the option you want to choose with the
Up or Down key.
6. Press the Select soft key to choose the setting.
Note: You can return to the previous menu level by
pressing the
soft key.
You can also access the menus and sub-menus by
quickly entering the corresponding menu number.
50
E800English_ORA.book Page 51 Thursday, July 1, 2004 5:49 PM
Using the menus
Example: Accessing the Answer phone menu.
1. Press the Menu soft key.
2. Press the 5 for Messages.
3. Press the 5 for Answer phone.
List of menu functions
Various menus let you check or change your phone
settings. The following list shows the menu
structure.
The numbers assigned to each menu option may
not match the menu number on the phone. It
depends on the services supported by your SIM
card.
Contacts menu
1. Contacts
1.
2.
3.
4.
5.
6.
(see page 57)
Find name
Add entry
Speed list
Copy all to phone
Send all via infrared
Delete all
2. Management
(see page 67)
1. Own number
2. Group setting
3. Memory status
3. Services
(see page 69)
1. Service directory
51
E800English_ORA.book Page 52 Thursday, July 1, 2004 5:49 PM
Using the menus
Main Menu
1. Call history
(see page 70)
1.
2.
3.
4.
5.
Missed calls
Received calls
Dialled calls
Delete all
Call time
1. Last call time
2. Total sent
3. Total received
4. Reset timers
6. Call costs*
1. Last call cost
2. Total cost
3. Max cost
4. Reset counters
5. Set max cost
6. Price/Unit
2. Games
(see page 74)
1. Applications
2. More games
3. Internet settings
1. APN
2. Login ID
3. Password
4. DNS settings
4. Memory status
3. Phone settings
(see page 79)
1. Sound settings
1. Incoming calls
2. Messages
3. Power on/off
4. Connection tone
5. Key tone
52
E800English_ORA.book Page 53 Thursday, July 1, 2004 5:49 PM
Using the menus
2.
3.
4.
5.
6.
7.
6. Minute minder
7. Quiet mode
8. Slider tone
9. Alerts on call
Display
1. Wallpaper
2. Skin
3. Backlight
4. LCD brightness
5. Service display
Language
1. Text language
2. Input mode
Security
1. PIN check
2. Change PIN
3. Phone lock
4. Change password
5. Privacy
6. SIM lock
7. FDN mode*
8. Change PIN2*
Network service
1. Call diverting
2. Call barring
3. Call waiting
4. Network selection
5. Caller ID
6. Active line*
Others
1. Greeting message
2. Auto redial
3. Slide down operation
4. Active slide
5. Anykey answer
6. Fax mode
7. Infrared activation
Reset settings
* Shown only if it is supported by your SIM card.
53
E800English_ORA.book Page 54 Thursday, July 1, 2004 5:49 PM
Using the menus
4. Camera
1.
2.
3.
4.
5.
6.
(see page 99)
Take photos
My photos
My albums
Delete all
Settings
Memory status
5. Messages
(see page 108)
1. Text messages
1. Create
2. Inbox
3. Outbox
4. Delete all
2. Photo messages
1. Create
2. Inbox
3. Outbox
4. Draft
5. My folder
6. Delete all
3. Push message
1. Inbox
2. Setting
3. Delete all
4. Preset messages
5. Answer phone
1. Connect to answer phone
2. Answer phone number
6. Broadcast
1. Read
2. Receive
3. Channel
4. Language
7. Settings
1. Text messages
2. Photo messages
54
E800English_ORA.book Page 55 Thursday, July 1, 2004 5:49 PM
Using the menus
8. Memory status
1. Text messages
2. Photo messages
6. WAP*
1.
2.
3.
4.
5.
6.
(see page 135)
Home
Bookmark
Go to URL
Clear cache
Proxy settings
Current proxy
7. SAT (SIM Application Toolkit)**
(see
page 142)
8. Media album
(see page 143)
1. Photos
1. My photos
2. My album1
3. My album2
2. Images
3. Sounds
1. Voices
2. My sounds
4. Delete all
1. Photos
2. Images
3. Sounds
5. Memory status
9. Calendar
1.
2.
3.
4.
(see page 147)
New memo
Calendar
To do list
Clock
1. Set time
* May not be shown or supported by your network service provider.
** Shown only if it is supported by your SIM card.
55
E800English_ORA.book Page 56 Thursday, July 1, 2004 5:49 PM
Using the menus
5.
6.
7.
8.
9.
56
2. Set date
3. Set world time
4. Set format
Alarm
Calculator
Conversion
1. Currency
2. Length
3. Weight
4. Volume
5. Area
6. Temperature
Timer
Stopwatch
E800English_ORA.book Page 57 Thursday, July 1, 2004 5:49 PM
Contacts menu
Contacts offer the following features:
• Contacts: allows you to find, create or set up the
speed-dialling feature and manage Contacts
entries.
• Management: allows you to create or remove
your own number, set up caller groups and check
the memory status.
• Services: allows you to use the service directory
depending on your SIM card.
Find name
To search for a number in the Contacts, proceed as
follows.
1. Enter a letter(s) of the name that you want to
find.
The Contacts entries are listed, highlighting the
entry matching your input.
2. If necessary, press the Up or Down key to scroll
to the entry you want.
3. Once you have found the entry, press the Ok
soft key.
4.
To
dial the displayed
number
change the Contacts
entries
Press the
key.
Options soft key. For
further details, see
page 58.
57
E800English_ORA.book Page 58 Thursday, July 1, 2004 5:49 PM
Contacts menu
Changing the phone memory entries
Scroll to the category that you want to edit by
pressing the Left or Right key. Following categories
are available and you can edit information of each
category by pressing the Options soft key.
Category Then
Mobile
Home
Office
Fax
Other
Select one of the following options. For
details for these options, refer to the
page 59.
Edit number
Change name
Send message (shown if the category
contains a number)
Copy (shown if the category contains a
number)
Send via infrared (shown if the
category contains a number)
Delete entry
E-Mail
Enter or edit e-mail address.
Note
Enter or edit the memo.
Group
Set one of the groups or no group.
Graphic
Set one of the images or no image.
Alert
Set one of the melodies or not assign.
58
E800English_ORA.book Page 59 Thursday, July 1, 2004 5:49 PM
Contacts menu
Changing the SIM memory entries
To change the SIM memory entry’s information,
press the Options soft key.
The following options are available:
Edit number
This option allows you to change the number. You
can also add a new number if none has been stored
for the selected category.
Change name
This option allows you to change the name of the
entry.
To clear the old name, press the C key. For more
information about how to enter characters, see
page 42.
Send message
This option allows you to send a message to the
number. For more information about how to send a
message, see page 110.
Copy
This option allows you to copy the entry from the
phone’s memory to the SIM card, and vice versa.
Send via infrared
This option allows you to copy the entry from your
phone to another device that has the IrDA port via
infrared.
Delete entry
This option allows you to delete the entry from
Contacts. To confirm the deletion, press the Yes
soft key. Otherwise, press the No soft key.
59
E800English_ORA.book Page 60 Thursday, July 1, 2004 5:49 PM
Contacts menu
Add entry
You can store phone numbers and the
corresponding names in the memory of your SIM
card. In addition, you can store up to 1000 names
in the phone memory and each name can be
associated with up to five numbers.
1. Enter the number you want to save.
Notes:
• If you make a mistake while entering a number,
correct it using the C key. For further details, see
page 28.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
the
key. “P” is displayed to indicate the pause.
2. When you are sure that the number is correct,
press the Save soft key.
3. Select the memory where the number is to be
stored, either Phone or SIM, and press the
Select soft key.
Note: If you change phones, any numbers stored
in your SIM card will automatically be
available with the new phone, whereas any
numbers stored in the phone’s memory
must be stored again.
4. If you select SIM in step 3, go to step 5.
If you select Phone in step 3, choose a number
type using the Up or Down key and press the
Select soft key.
5. Enter the associated name.
60
E800English_ORA.book Page 61 Thursday, July 1, 2004 5:49 PM
Contacts menu
For information about how to enter characters,
see page 42.
6. When you are satisfied, press the Ok soft key.
7. If you select Phone in step 3, go to step 8.
If you select SIM in step 3, enter the location
number and press the Ok soft key.
8. If you want to change the entry, use the options.
for information about how to do it, see page 58.
If you want to return to Idle Mode, press the
soft key or the
key.
Storing a number in idle mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the Contacts.
Continue the procedure from step 1 on page 60 to
store the number.
Speed list
You can set up to eight speed-dial entries and then
dial them easily whenever you want, simply by
pressing the associated number key.
Setting up speed-dial entries
1. Press the Up or Down key to scroll to an empty
location and press the Select soft key.
2. When the Edit number option highlights, press
the Select soft key.
61
E800English_ORA.book Page 62 Thursday, July 1, 2004 5:49 PM
Contacts menu
3. Enter a phone number and press the Ok soft
key. Or,
To retrieve a number from your Contacts, press
the Contacts soft key. Select an entry from the
list and press the Ok soft key. Press the Ok soft
key to save it.
4. When you have finished, press the
the
key to exit.
soft key or
Editing the speed-dial entries
1. Select the speed-dial entry you want to edit
from the list and press the Select soft key.
2. Select one of the following menu options by
pressing the Up or Down key and press the
Select soft key:
• Edit number: allows you to change the
number.
• Change name: allows you to change the
name of the entry.
• Delete: allows you to clear the setting so that
no number is assigned to the key.
3. When you have finished, press the
the
key to exit.
soft key or
Using the speed-dial feature
When the idle screen is displayed, press the number
key, 2 to 9, assigned to the speed-dial entry and
press the
key. You can also press and hold the
number key.
Note: The 1 key is reserved for your answer phone
server number.
62
E800English_ORA.book Page 63 Thursday, July 1, 2004 5:49 PM
Contacts menu
Dialling a number stored in the SIM card
Once you have stored phone numbers in your SIM
card, you can dial them easily whenever required.
To dial a number stored in the SIM card:
1. Enter the number of the SIM card location where
the number you want to dial is stored.
2. Press the
key.
The display shows the name and number stored
in that location.
3. Press the Dial soft key or the
key.
Copy all to phone
You can copy all of the numbers stored in the SIM
card to the phone’s memory.
1. When a confirming message appears, press the
Yes soft key to copy.
The numbers in the SIM card are copied to the
phone’s memory, labelled with Mobile by
default.
Otherwise, press the No soft key.
2. When you have finished, press the
the
key to exit.
soft key or
63
E800English_ORA.book Page 64 Thursday, July 1, 2004 5:49 PM
Contacts menu
Send all via infrared
Via the infrared connection, you can send your
Contacts entries to another IrDA- compliant devices
and vice versa.
Note: This feature may not be available depending on
the devices.
Sending your Contacts
1. Align the IrDA ports on both sides each other.
2. Access the Send all via infrared menu option
in the Contacts menu and choose one of the
following options and press the Select soft key:
• All: allows you to send all of the entries, from
the entry you choose to the end of the SIM
card and Phone list.
• SIM: allows you to send all of the entries,
from the entry you choose to the end of the
SIM card list.
• Phone: allows you to send all of the entries,
from the entry you choose to the end of the
Phone list.
3. When you select All and press the OK soft key,
your phone displays all of the Contacts entries.
When you select SIM or Phone and press the
OK soft key, all of the entries stored in the
corresponding memory location are listed.
4. Scroll to the entry you want to send as
beginning and press the OK soft key.
Your phone begins sending the entry(ies).
64
E800English_ORA.book Page 65 Thursday, July 1, 2004 5:49 PM
Contacts menu
IrDA port
IrDA port
Receiving Contacts from another device
1. Align the IrDA ports on both sides each other.
2. Access the Infrared activation menu (see
page 97) and select On to activate the port.
3. When your phone receives Contacts data from
the other device:
If the other person sends you one entry, your
phone displays the name and the phone number
and you can specify whether or not you want to
save it. Continue to step 4.
If the person sends you the entries by All, SIM,
Phone you can select a memory location, SIM
card or phone’s memory. Continue to step 5.
4. Press the Save soft key to store the entry.
You can also discard the entry by pressing the
Cancel soft key.
5. Press the SIM or Phone soft key.
The entries are saved in the appropriate
memory.
65
E800English_ORA.book Page 66 Thursday, July 1, 2004 5:49 PM
Contacts menu
Delete all
You can delete Contacts entries selectively
depending on the memory location, or all entries at
once.
1. Scroll to a desired memory selection and place a
check mark ahead of it by pressing the Select
soft key.
Selecting All places check marks on all of the
memories.
2. If necessary, repeat step 1 to check another
options.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the entries in the
memory(ies). Then enter the phone password
and press the Ok soft key.
The password is preset to “00000000” by
default. To change it, see page 86.
Otherwise, press the No soft key.
66
E800English_ORA.book Page 67 Thursday, July 1, 2004 5:49 PM
Contacts menu
Own number
To store your own phone number(s) with a name:
1. Scroll to an empty location by pressing the Up or
Down key and press the Select soft key.
2. When Edit number highlights, press the Select
soft key.
3. Enter your number and press the Ok key.
4. To assign a name, press the Down key to move
to Change name and press the Select soft key.
5. Enter a name and press the Ok soft key.
6. When you have finished, press the
the
key to exit.
soft key or
To remove one of your numbers:
1. Select the entry you want to delete from the
Own number list and press the Select soft key.
2. Scroll to Delete by pressing the Up or Down key
and press the Select soft key.
3. When a confirming message appears, press the
Yes soft key to delete the number.
Otherwise, press the No soft key.
4. When you have finished, press the
the
key to exit.
soft key or
67
E800English_ORA.book Page 68 Thursday, July 1, 2004 5:49 PM
Contacts menu
Group setting
You can change the settings of the ten predefined
caller groups.
1. Select a caller group by pressing the Up or Down
key and press the Select soft key.
2. Scroll to a setting option by pressing the Up or
Down key and press the Select soft key.
The following options are available:
• Melody: allows you to select a melody to
sound when a call comes in from a member in
the group.
• Change name: allows you to change the
name of the group; for further details about
how to enter characters, see page 42.
• View image: shows the image to display
when a call comes in from a member in the
group.
3. Change the setting as required and press the
Select soft key.
4. Repeat steps 2 and 3 to change other options.
When you have finished, press the
the
key to exit.
68
soft key or
E800English_ORA.book Page 69 Thursday, July 1, 2004 5:49 PM
Contacts menu
Memory status
You can check how many names are stored in SIM
card and phone’s memory.
When you have finished, press the
the
key to exit.
soft key or
Service directory
Note: This feature may not be available depending on
your SIM card.
The display shows the list of the numbers in the
Service directory.
If necessary, scroll to a number by pressing the Up
or Down key and press the
key to dial the
number.
69
E800English_ORA.book Page 70 Thursday, July 1, 2004 5:49 PM
Call history
Via this menu, you can view the:
• calls you missed, received or dialled.
• cost of your calls.
• length of your calls.
Note: You can access the numbers in the three types
of call records by pressing the
key in Idle
Mode.
Missed calls
This option lets you view the last 20 unanswered
calls if the caller line identification is available.
The number, or name if available, displays together
with the date and time when the call was missed.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all of the calls.
• paste the number into Contacts.
Received calls
This option lets you view the last 20 received calls if
the caller line identification is available.
The number, or name if available, displays together
with the date and time when the call was received.
70
E800English_ORA.book Page 71 Thursday, July 1, 2004 5:49 PM
Call history
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all of the calls.
• paste the number into Contacts.
Dialled calls
This option lets you view the last 20 dialled
numbers.
The number, or name if available, displays together
with the date and time when the call was made.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all the calls.
• paste the number in Contacts.
Delete all
You can delete all of the numbers stored in each call
record.
When a confirming messages appears, press the
Yes soft key to confirm.
Otherwise, press the No soft key.
71
E800English_ORA.book Page 72 Thursday, July 1, 2004 5:49 PM
Call history
Call time
This option lets you view the timers for calls made
and received.
Notes:
• If your SIM card supports the ALS (Alternate Line
Service) feature, you must first select the
appropriate line.
• The actual time invoiced for calls by your service
provider may vary, depending on network features,
rounding-off for billing purposes and others.
The following timers are available:
Last call time: the length of the last call.
Total sent: the total length of all calls made since
the timer was last reset.
Total received: the total length of all calls received
since the timer was last reset.
Reset timers: the option used to reset the call
timers. You need to enter the phone password and
then press the Ok soft key.
Call costs
This feature lets you view the cost of calls.
Notes:
• This feature is not intended to be used for billing
purposes.
• AOC (Advice Of Charge) information may display in
Idle Mode, depending on your SIM card or service
provider.
72
E800English_ORA.book Page 73 Thursday, July 1, 2004 5:49 PM
Call history
The following options are available:
Last call cost: cost of the last call made.
Total cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set via the Set max cost
option, you can no longer make any calls until you
reset the counter.
Max cost: maximum cost set via the Set max cost
option.
Reset counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 167) and then press the Ok soft key.
Set max cost: option used to enter the maximum
cost that you authorise for your calls; you must first
enter your PIN2 (see page 167) and then press the
Ok soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls; you must first enter your PIN2
(see page 167) and then press the Ok soft key.
73
E800English_ORA.book Page 74 Thursday, July 1, 2004 5:49 PM
Games
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone.
Applications
A list of Java games is displayed. In basic, two preloaded MIDlets (Java games) are provided. If the
list of Java games is empty, a pop up message is
displayed to invite to download a new game. To add
MIDlets to the list, you can download MIDlets from
the Web sites.
To
Press the
find a game
Up or Down key.
run a game
Launch soft key.
view detail
information
Info soft key.
delete the game
Delete soft key in the
information display.
SnowBallFight
The goal of this game is to challenge and defeat the
snowball fight champions of four different teams.
Accessing a game
After loading the game, press any key twice to go to
the first menu screen. At the first menu screen,
press
key to play a game, or press
key to
access the main menu of this game.
74
E800English_ORA.book Page 75 Thursday, July 1, 2004 5:49 PM
Games
Play: allows you to start a new game or a saved
game. Saved game allows you to continue the
beginning of last stage you played.
Instructions: shows you the explanation of control
keys, offense items and defense items.
Configuration: allows you to turn the sound,
vibration on or off and select the game speed from
1 to 5.
Quit: quits the game and returns to the downloads
menu screen.
Playing a game
Move the character along the street using the
navigation key. If you have enough gold coins which
you can earn while fighting to buy items, you can
buy defense items at the drug store and offense
items at the item shop. Move the character to the
team of current stage and press
key to select it.
When the snowball fight game starts, hit the rival
kids with snowballs and avoid theirs. While fighting
you can use items you have. If you raise enough
mana, you can also use special attack. You should
win all fights in four stages in order to challenge the
champions of the snowball fight.
Key Commands
4/6 or Left/Right: move left or right
2,5 or Up, :control the distance at the first press
and throw the snowball at the next press.
8 or Down: use the special attack depending on
your mana
3: enters item mode to use your item, select the
item you want to use by pressing 2, 5, Up or
key.
75
E800English_ORA.book Page 76 Thursday, July 1, 2004 5:49 PM
Games
Special attacks
Level 1: Aurora, all enemies are hit by a snowball.
Level 2: Ice dragon, all enemies are hit by a
snowball and frozen for 8 seconds.
Level 3: Icicle storm, double powered snowball
attack to all enemies and decreasing enemies’
attack accuracy for 10 seconds.
BubbleSmile
BubbleSmile is an arcade puzzle game.
Accessing a game
After loading the game, you will see the following
options, press
key to select one of them:
Start game: allows you to start a new game with
timed mode or skilled mode.
• Timed mode: you have to achieve the best score
before gauge disappear at the time bar. When
you get the same coloured bubble together,
gauge at the time bar increases.
• Skilled mode: you have to make more then 4
bubbles disappear at once for the gauge at the
skill bar increase. If 3 or none of bubbles
disappear, then the gauge decreases.
Continue: allows you to continue the last game
you played. The menu is only available when a
game has already been played.
High score: shows you the high score table.
How to play: shows you the instruction of this
game.
Option: allows you to set the sound on or off
76
E800English_ORA.book Page 77 Thursday, July 1, 2004 5:49 PM
Games
Playing a game
Your score goes up when you remove the bubbles.
Only when more than 3 same coloured bubbles line
up horizontally or diagonally, they disappear. To line
up the bubbles, move the band rounding three
bubbles to suitable place and rotate it. When the
game is over, your score is ranked on the high score
board if it is within third.
Key Commands
2, 4, 6, 8, or navigation key: move the band up,
down, left or right
1: rotate the bubbles in the band counterclockwise
3: rotate the bubbles in the band clockwise
More games
This menu option allows you to download Java
games to your phone via WAP, which you can then
use wherever you are.
Internet settings
This menu option allows you to set the information
to connect the Java server. This information is
provided by the network operator automatically, but
you can change it manually.
APN: enter the access point name used for the
address of the GPRS network gateway.
Login ID: enter the user ID required to connect to
the GPRS network.
77
E800English_ORA.book Page 78 Thursday, July 1, 2004 5:49 PM
Games
Password: enter the password required to connect
to the GPRS network.
DNS setting: enter the DNS address. The DNS
(Domain Name Server) address to connect the Java
server is automatically set when making data call
set up.
Memory status
You can check the free space for Java download.
The display also shows the total memory and used
memory.
78
E800English_ORA.book Page 79 Thursday, July 1, 2004 5:49 PM
Phone settings
Many different features of your phone can be
customised to suit your preferences via the
Phone settings menu.
Sound settings
You can use the Sound settings feature to
customise various settings, such as the:
• ringtone, volume and type for incoming calls or
messages.
• sounds made when your call is connected or
when you press a key.
• quiet mode which your phone switches to when
you hold down the
key in the Idle Mode.
Incoming calls
This option allows you to set up the ringer for
incoming calls.
Note: If your SIM card supports the ALS (Alternate
Line Service) feature, you must select the line
you wish to change first.
The following options are available:
Each time you select a melody from the list, it plays
the melody.
Default melodies: allows you to select one of the
predefined melodies.
79
E800English_ORA.book Page 80 Thursday, July 1, 2004 5:49 PM
Phone settings
More ringtones: allows you to download melodies
via WAP.
My sounds: allows you to select one of the sounds
received from other sources, such as theWAP sites,
the EasyStudio PC software or photo messages.
Ring volume: allows you to adjust the ring
volume. Use the Up and Down keys or the volume
keys on the left side of the phone. The more bars
you see, the louder the volume.
Alert type: lets you specify how you are informed
of any incoming calls.
Melody: the phone rings using the melody selected
via the Default melodies and My sounds option.
See above.
Vibration: the phone vibrates but does not ring.
Vibration then melody: the phone first vibrates and
then starts ringing.
Messages
This option allows you to set up the ringer for each
incoming text message and photo message
received.
Text messages / Photo messages:The following
options are available:
Tone: lets you choose from many different tones.
Each time you select a tone from the list, the tone is
played.
Alert type: lets you specify how you are informed of
any incoming messages.
• Silent: only the text notification appears; the
phone neither rings nor vibrates.
80
E800English_ORA.book Page 81 Thursday, July 1, 2004 5:49 PM
Phone settings
• Tone: the phone rings using the tone selected via
the Tone option. See above.
• Vibration: the phone vibrates but does not ring.
• Vibration then tone: the phone first vibrates and
then the phone rings.
Repetition: allows you to specify how often the
phone informs you of a new message. You can
choose either Once or Periodic.
Power on/off
This option allows you to select the melody that the
phone sounds when you switch it on or off.
You can choose either Classical or Future. To turn
the sound off, select Off.
Connection tone
This menu option allows you to specify whether or
not the phone beeps when the phone connects to
the network.
The following options are available:
Off: the phone does not beep.
On: the phone beeps when your call is accepted.
Key tone
This menu option allows you to select the tone that
the keypad sounds when you press a dial key.
To turn the sound off, select Off.
To adjust the key tone volume, press the volume
keys on the left side of the phone in Idle Mode.
81
E800English_ORA.book Page 82 Thursday, July 1, 2004 5:49 PM
Phone settings
Minute minder
This menu option allows you to specify whether or
not the phone beeps every minute during a call to
keep you informed of the length of your call.
The following options are available:
Off: the phone does not beep.
On: the phone beeps every minute.
Quiet mode
When you hold the
key down in Idle Mode, the
phone switches to the Quiet Mode. You can specify
whether the phone vibrates or mutes when in the
Quiet Mode.
The following options are available:
Vibration: the phone vibrates rather than rings in
the Quiet Mode.
Mute: the phone mutes sounds in the Quiet Mode.
Slider tone
This menu allows you to select the slider tone that
the phone sounds when you slide the folder up or
down.
To turn the sound off, select Off.
Alerts on call
This menu allows you to set the phone to all alerts
while calling.
To turn the alerts off, select Off.
82
E800English_ORA.book Page 83 Thursday, July 1, 2004 5:49 PM
Phone settings
Display
You can change the background image and the
colour of the components on the display according
to your preference and needs.
Wallpaper
This option allows you to change the background
image to be displayed in Idle Mode.
The following options are available:
Animations: allows you to select one of the
animations.
More pictures: allows you to download images via
WAP.
Photos: allows you to select one of the photos
taken by the camera.
Images: allows you to select one of the images in
the Images in the Media album menu that are
downloaded from the WAP sites, the EasyStudio PC
software or photo messages.
Text style: allows you to set the style of the text
displayed on the idle screen.
Skin
You can change the colour setting of the display
components, such as soft key indications area or
the menu names and icons.
83
E800English_ORA.book Page 84 Thursday, July 1, 2004 5:49 PM
Phone settings
Backlight
You can specify how long the phone uses the
backlight.
Select how long the backlight remains on after the
last key is pressed.
LCD brightness
This option allows you to adjust the brightness of
the display screens to make them lighter or darker.
1. Adjust the contrast by using the Up and Down
keys or the volume keys on the left side of the
phone.
2. When you are satisfied, press the Ok soft key to
save the selection.
Service display
You can turn off the service display or change the
time interval of the service display.
Language
You can select a different language for the display
text and text input modes. The following options
are available:
Text language: allows you to change the language
of the display text, such as menus, options or
warning messages.
Input mode: allows you to set the default
language to be used in the text input mode.
84
E800English_ORA.book Page 85 Thursday, July 1, 2004 5:49 PM
Phone settings
Security
The security settings enable you to restrict the use
of your phone to the people and types of calls of
your choice.
Various codes and passwords are used to protect
the features of your phone. For more information,
see page 166 -168.
PIN check
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
To change your PIN, see the Change PIN menu
option below.
Change PIN
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
85
E800English_ORA.book Page 86 Thursday, July 1, 2004 5:49 PM
Phone settings
Phone lock
When the Phone lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change password menu option below.
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Change password
The Change password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Privacy
This feature allows you to lock or unlock the usage
of the contents, such as photo messages, photos,
images and sounds.
To enable or disable the Privacy feature, you must
enter your phone password.
86
E800English_ORA.book Page 87 Thursday, July 1, 2004 5:49 PM
Phone settings
SIM lock
To enable the SIM lock feature, you must enter a
new four- to eight-digit SIM lock code, and confirm
it by entering it again.
The following options are available:
Disable: you can use any other SIM cards with
your phone.
Enable: you must enter the SIM lock code to use
another SIM card with your phone.
To unlock the SIM, enter the SIM lock code.
FDN mode
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
Contacts. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To change your PIN2, see the Change PIN2 menu
option below.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
87
E800English_ORA.book Page 88 Thursday, July 1, 2004 5:49 PM
Phone settings
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Network services
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you wish.
Call diverting
Note: The call divert options may be different
depending on your SIM card and those not
supported by your network operator may not
be shown.
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
Call diverting can be set up in the following ways:
Divert always: all calls are diverted.
Busy: calls are diverted if your phone is engaged
on another call.
No reply: calls are diverted if you do not answer
the phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
Cancel all: all call diverting options are
deactivated.
You can specify individual call diverting options for
each of the following call types:
88
E800English_ORA.book Page 89 Thursday, July 1, 2004 5:49 PM
Phone settings
• Voice calls only
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
Example: You can:
• systematically divert fax calls to your
office fax machine.
• divert voice calls to your colleague if
you are already using the phone.
Setting call diverting options
1. Select the type of call diverting by pressing the
Up or Down key and then press the Select soft
key.
2. Select the type of calls to be diverted by
pressing the Up or Down key and then press the
Select soft key.
3. Press the Activate soft key to confirm your
settings.
4. Enter the number to which the calls are to be
diverted.
To enter an international code, hold down the 0
key until the + sign displays.
You can also select a number in Contacts or the
answer phone server number, by pressing the
Options soft key, followed by Contacts or
Answer phone.
5. When you are satisfied, press the Ok soft key.
The phone sends your settings to the network
and displays the network’s acknowledgement.
89
E800English_ORA.book Page 90 Thursday, July 1, 2004 5:49 PM
Phone settings
Deactivating specific call diverting options
1. Select the call diverting option to be
deactivated.
2. Select the type of calls to which this option
applies.
3. Press the Remove soft key.
The phone sends your settings to the network
and displays the network’s acknowledgement.
You can also deactivate all call diverting options by
selecting the Cancel all option.
Call barring
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways:
All outgoing: calls cannot be made.
International: international calls cannot be made.
International except to home: when abroad,
calls can be made only to numbers within the
current country and to your home country, that is
the country where your home network provider is
located.
All incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
Cancel all: all call barring options are deactivated;
calls can be made and received normally.
90
E800English_ORA.book Page 91 Thursday, July 1, 2004 5:49 PM
Phone settings
Change barring password: allows you to change
barring password.
You can specify individual call barring options for
each of the following call types:
• Voice calls only
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
Setting call barring options
1. Select the type of call barring by pressing the Up
or Down key and then press the Select soft key.
2. Select the type of calls to be barred by pressing
the Up or Down key and then press the Select
soft key.
3. Press the Activate soft key to confirm your
settings.
4. Enter your call barring password supplied by
your service provider and press the Ok soft key.
The phone sends your settings to the network
and displays the network’s acknowledgement.
Deactivating specific call barring options
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option
applies.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and displays the network’s acknowledgement.
91
E800English_ORA.book Page 92 Thursday, July 1, 2004 5:49 PM
Phone settings
You can also deactivate all call barring options by
selecting the Cancel all option.
Changing the barring password
You can set and change the call barring password
obtained from your service provider.
1. Select Change barring password from the
Call barring screen, and press the Select soft
key.
2. Enter the current password and press the Ok
soft key.
3. Enter a new password and press the Ok soft
key.
4. Enter the new password again to confirm it and
press the Ok soft key.
Call waiting
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for
each of the following call types:
• Voice calls only
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
Activating the call waiting feature
1. Select the type of calls to which the call waiting
option is to be applied by pressing the Up or
Down key and then press the Select soft key.
92
E800English_ORA.book Page 93 Thursday, July 1, 2004 5:49 PM
Phone settings
2. Press the Activate soft key to confirm your
settings.
The phone sends your settings to the network
and displays the network’s acknowledgement.
Deactivating specific call waiting options
1. Select the type of call to which the option
applies.
2. Press the Deactivate soft key.
The phone sends your settings to the network
and displays the network’s acknowledgement.
You can also deactivate all call waiting options by
selecting the Cancel all option.
Network selection
The Network selection feature enables you to
automatically or manually select the network used
when roaming outside your home area.
Note: You can select a network other than your home
network only if it has a valid roaming
agreement with your home network.
To indicate to automatically or manually select the
network when roaming:
1. Press the Up or Down key until the appropriate
option highlights and press the Select soft key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to step 2.
93
E800English_ORA.book Page 94 Thursday, July 1, 2004 5:49 PM
Phone settings
2. Press the Up or Down key until the preferred
network highlights and press the Select soft
key.
You are connected to that network when
roaming.
Caller ID
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to change
this setting.
The following options are available:
Default: the default setting provided by the
network is used.
Hide number: your number does not display on
the other person’s phone.
Send number: your number is sent each time you
make a call.
Active line
Some SIM cards may be used with two subscriber
numbers. This functions is available only if your SIM
card supports it.
This menu option allows you to select the line to be
used to make calls. However, calls can be answered
on both lines, regardless of the selected line.
94
E800English_ORA.book Page 95 Thursday, July 1, 2004 5:49 PM
Phone settings
Others
Greeting message
This menu option allows you to set a greeting
message to be displayed briefly when the phone is
switched on.
When you access this menu, the current message
displays.
To
Press the
clear the existing
message
C key and hold it down.
enter a new
message
appropriate alphanumeric
keys.
save your input
Ok soft key.
cancel your input
and return to Idle
Mode
key.
For further information on how to enter text, see
page 42.
Auto redial
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies.
The following options are available:
Off: the number is not redialled.
On: the number is redialled automatically.
95
E800English_ORA.book Page 96 Thursday, July 1, 2004 5:49 PM
Phone settings
Slide down operation
You can select the phone’s action when you slide
the folder down.
Stop operation: when you slide the folder down,
the phone stops the current operation and locks the
keypad automatically.
Continue operation: when you slide the folder
down, the phone performs the current operation
continuously. But the confirming message to lock
the keypad appears on the display in the Idle Mode.
Active slide
You can answer incoming calls by sliding the folder
up or not.
Off: you have to press a key to answer a call,
depending on the setting of the Anykey answer
option. See below.
On: you can simply slide the folder up to answer a
call.
Anykey answer
You can answer incoming calls by pressing anykey
or not.
Off: you can only press
to answer incoming calls.
or the Accept soft key
On: you can press any key, except
and the
Reject soft key to answer incoming calls.
96
E800English_ORA.book Page 97 Thursday, July 1, 2004 5:49 PM
Phone settings
Fax mode
You can use your phone as a modem for faxing
when it is connected to computing devices. You
need to purchase a data kit from your local
Samsung dealer.
In this menu, you can enable the fax mode on your
phone.
The following options are available:
Off: you can send or receive data calls.
On: you can send or receive fax calls.
In any case you can send or receive voice calls.
After connecting the phone to your computing
device using the data cable and set this menu to
On. Your phone works as a fax modem.
For further details about setting and faxing through
the phone on your computer, see the computers
user’s manual.
Infrared activation
In this menu, you can activate or deactivate the
infrared port.
The following options are available:
Off: deactivates infrared feature on the phone.
On: activates the infrared feature on the phone.
The IrDA icon (
) appears on the top line of the
display.
If there is no communication between your phone
and the IrDA-compliant device within 1 minute of
activating the feature, it is automatically
deactivated.
97
E800English_ORA.book Page 98 Thursday, July 1, 2004 5:49 PM
Phone settings
Reset settings
This menu option allows you to reset your phone to
its default configuration. You can reset all of the
settings at once.
When a confirming message appears, press the Yes
soft key to reset settings. Then enter the phone
password and press the Ok soft key.
The password is preset to “00000000” by default.
To change it, see page 86.
Otherwise, press the No soft key.
98
E800English_ORA.book Page 99 Thursday, July 1, 2004 5:49 PM
Camera
Using the camera module embedded in your phone,
you can take pictures for people or events while on
the move. Additionally, you can send photos to
other people in a picture message or as an e-mail
attachment. The camera produces JPEG pictures.
CAUTIONS:
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are not
allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Take photos
This menu allows you to take a picture to send the
photo as a picture message to other destinations.
You can use the picture as a background and store
it separately in My album folder.
Taking a picture
1. Slide the folder up.
2. To take pictures immediately in Idle Mode, press
and hold the Camera ( ) key on the right side
of the phone. Or select the take photos menu
options in the Homescreen Menu.
The image to be captured appears on the
display.
99
E800English_ORA.book Page 100 Thursday, July 1, 2004 5:49 PM
Camera
The icons on the top line of the display indicate
the size, quality, flash type and current mode
(shown if you select the multi-shot mode or
night mode).
3. Adjust the image by aiming the camera to the
subject.
To
Press the
adjust the brightness of
the picture
Left or Right key.
zoom in or out the
picture
Up or Down key.
flip the picture up and
down
volume up key
reverse the picture like a volume down key
mirror image
turn the viewfinder’s
frame on or off
1 key
change the picture size
2 key
change the picture
quality
3 key
select the mode
4 key
select the effect
5 key
go to the Settings menu 6 key
100
select the frame
7 key
select the delay time
8 key
go to the My photos
menu
9 key
E800English_ORA.book Page 101 Thursday, July 1, 2004 5:49 PM
Camera
To
Press the
switch the camera flash
on or off (if you set the
Manual option in the
Flash light menu. See
page 104, 107)
0 key
For more information about these functions, see
“Using the Camera options” on page 102.
4. Press the
soft key or the Camera ( ) key on
the right side of the phone to take a picture.
The picture is automatically saved in the My
photos (see page 105).
5. To
Press the
use the options
Options soft key.
For details about the
options, see below.
delete the picture file
Delete soft key.
return to the capture
mode to take another
picture.
C key.
turn the camera off
and return to Idle Mode
key.
When you press the Options soft key in step 4, the
following options are available. Scroll the option you
want by pressing the Up and Down keys and press
the Select soft key:
Send: allows you to send a photo message using
the taken picture. For further details about sending
photo messages, see page 117.
101
E800English_ORA.book Page 102 Thursday, July 1, 2004 5:49 PM
Camera
Rename: allows you to rename the taken picture.
Go to my photos: allows you to see the taken
pictures in the My photos (see page 105).
Set as: allows you to set it as a wallpaper or a
caller ID.
Wallpaper: allows you to set it as a wallpaper.
Caller ID: allows you to set it as a caller ID.
Protection: allows you to protect the taken picture
from deletion or not.
Properties: this option shows you information
about the picture, such as name, size, date,
resolution, protection type and format.
Using the Camera options
When you press the
soft key in the capture
mode, the following options are available for the
current shot:
Mode: You can take a picture in various modes.
Once you change the mode, its indicator appears at
the top left on the display.
Normal shot: you can take a picture in the normal
mode.
Multi-shot: you can take action stills. Select speed
and the number of pictures you want to take. When
you press the
soft key or the Camera ( ) key
on the right side of the phone, the phone
automatically takes and saves the pictures
successively as many times as you set. The Mobile
(128*120) size will be set by default.
102
E800English_ORA.book Page 103 Thursday, July 1, 2004 5:49 PM
Camera
Note: The zoom control bar and the brigthness control
bar do not display when you use the multi-shot
mode.
Night mode: this option allows you to take a picture
of the best quality when it is dark.
Capture only: you can take pictures without review.
Frame: this option allows you to use a frame on
the picture. Press the navigation key to find the
frame format you want to use. You can preview the
image with the frame format by using the Preview
soft key. The Mobile (128*120) size will be set by
default.
Note: The zoom control bar and the brigthness control
bar do not display when you use the frame.
Effects: this option allows you to apply special
effects to the picture. Press the Up or Down key to
find the tone you want to use. Gray, Negative,
Sepia, Emboss and Sketch are available. To
deactivate the effect setting, select Off.
Rotation: this option allows you to flip the image
vertically or reverse it as a mirror image.
Timer: you can select the delay time. When you
press the capture key, the phone takes the picture
after the specified time. When you exit the camera
mode or select Off in the Timer menu, the timer is
off.
Settings: this option allows you to change the
settings for taking a picture. And this option is
synchronized with the Settings menu (Menu 4.5).
103
E800English_ORA.book Page 104 Thursday, July 1, 2004 5:49 PM
Camera
Photo size: sets the image size to one of
VGA(640*480), QVGA(320*240),
QQVGA(160*120) and Mobile(128*120). The
selected image size displays on the capture screen.
Photo quality: allows you to select the image quality
from Super fine, Fine, Normal, and Economy.
The option you select appears on the top of the
display.
Shutter sound: allows you to select a sound when
you press the shutter, the
soft key or the
Camera ( ) key on the right side of the phone.
Note: This sound setting is not applied to the multishot sound.
Flash light: allows you to set the camera flash to
use automatically or not.
• Manual: to switch the camera flash on or off, you
have to press the 0 key in the capture mode.
• Automatic: when you press the shutter, the
soft key or the Camera ( ) key on the right side
of the phone, the phone lights a flashlight. After a
while the camera takes a picture and the
flashlight go out.
Default name: allows you to change the default
prefix name of the picture.
Help: this option shows you the functions of the
navigation keys and the volume keys in the capture
mode.
104
E800English_ORA.book Page 105 Thursday, July 1, 2004 5:49 PM
Camera
My photos
In this menu, you can review the pictures you have
taken.
To
Press the
scroll through the
pictures
navigation keys.
show the selected picture View soft key.
as an enlargement
go back to the multiple
view mode
Multi soft key.
use the options
Options soft key.
For details, see
page 101.
turn the camera off
and return to Idle Mode
key.
My albums
My Album allows you to store the pictures as your
photo album. Select one of albums. It shows the
pictures saved in the album. For details about
viewing your pictures and using them, see
page 105.
105
E800English_ORA.book Page 106 Thursday, July 1, 2004 5:49 PM
Camera
Delete all
You can delete all the photos saved in each
category.
1. Scroll to a photo box and place a check mark
ahead it by pressing the Select soft key.
Selecting All places check marks on all of the
photo boxes. If you want to delete the protected
photos and the caller ID photos, select the With
protected photos option and the With caller
ID photos option.
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the photos in the
box(es).
Otherwise, press the No soft key.
Settings
This menu option allows you to change the default
settings of the options for using the camera feature.
The following options are available:
Photo size: sets the image size to one of
VGA(640*480), QVGA(320*240),
QQVGA(160*120) and Mobile(128*120). The
selected image size displays on the capture screen.
106
E800English_ORA.book Page 107 Thursday, July 1, 2004 5:49 PM
Camera
Photo quality: allows you to select the image
quality from Super fine, Fine, Normal, and
Economy. The option you select appears on the top
of the display.
Shutter sound: allows you to select a sound when
you press the shutter, the
soft key or the
Camera ( ) key on the right side of the phone.
Note: This sound setting is not applied to the multishot sound when.
Flash light: allows you to set the camera flash to
use automatically or not.
Manual: to switch the camera flash on or off, you
have to press the 0 key in the capture mode.
Automatic: when you press the shutter, the
soft
key or the Camera ( ) key on the right side of the
phone, the phone lights a flashlight. After a while
the camera takes a picture and the flashlight go
out.
Default name: allows you to change the default
prefix name of the picture.
Memory status
Camera, Media album and photo message boxes
share a given amount of memory in your phone.
The display shows the status of free and used
memory.
You can see the used memory status of Camera,
Media album and photo message boxes by pressing
the Left or Right key.
107
E800English_ORA.book Page 108 Thursday, July 1, 2004 5:49 PM
Messages
This menu allows you to create, send, read and
save messages with the Short Message Service
(SMS: text message), Enhanced Message Service
(EMS: message including simple image, animation
or melody) and Multimedia Message Service
(MMS, photo message service: message supporting
the presentation of various media types, such as
full colour images and polyphonic ring tones). Voice
mails (answer phone) are also available.
Note: This feature is only available if your service
provider’s network supports it. Contact your
service provider for more information.
Text messages
Short message service (SMS, text message) allows
you to send and receive short text messages to and
from other GSM mobile phones. In addition, your
phone supports the Enhanced Messaging Service
(EMS), which enables you to make text messages
consisting of simple pictures, melodies, animations
and styled text all of which adds a new dimension to
simple text messages.
To send text messages by phone, you must obtain
the number of the SMS centre from your service
provider.
Receiving a new message
When you receive a new message, the New
message icon (
) and a text notification showing
the number of the message appear on the display.
You also hear an alert, depending on the message
sound setting; for further details, see page 80.
108
E800English_ORA.book Page 109 Thursday, July 1, 2004 5:49 PM
Messages
To read the new message(s) immediately, press the
View soft key. The list of the messages appears.
Note: To clear the new message notification on the
display, press the
key. When you also
have missed calls, voice mails (answer phone),
text messages or photo messages, and multi
CBs, the right soft key indication changes in the
following order: Missed, Connect, View, CB
and Contacts.
Managing memory
Inbox and Outbox share a given amount of memory
in your phone or SIM card. When the message
memory is full, the New message icon (
) blinks
and an error message displays. (It disappears when
you press the
key, but it reappears if you
don’t delete old messages.) In this case, you cannot
receive any new messages. You must delete one or
more old messages to get free memory for new
messages using the Delete option within the Inbox
or Outbox or the Delete all option; for further
details, see page 114.
Create
Using this menu, you can write messages,
containing text, images and melodies.
1. Create a message.
On the first line of the display, you see the
number of remaining characters you can enter,
the number of current message and the
maximum messages you can create, and the
font style you set in Text option.
109
E800English_ORA.book Page 110 Thursday, July 1, 2004 5:49 PM
Messages
Note: For further information about how to enter
characters, see page 42.
2. While entering your message, press the
Options soft key to use the following options.
• Send: allows you to send the message. Refer
to the next step.
• Text: allows you to format the text. Following
text attributes can all be combined as
required.
Text size: Small/Medium/Large
Text mode: Normal/Underscore/Strikethrough
Bold: Off/On
Italic: Off/On
Alignment: Left/Center/Right
• Add media: allows you to add pictures,
animations and/or melodies to the message.
Select a category; Add picture, Add
animation or Add melody. You can then
choose a factory-set object or an object that
you have received from another source and
stored in the Media album. See page 143.
• Preset messages: allows you to add a preset
message to your text. Select one of nine
messages stored in the Preset messages
menu option. See page 127.
• Save message: allows you to save the
message so that it can be sent later. You can
read the message in the Outbox.
3. When you have finished entering your message,
choose Send from the options.
110
E800English_ORA.book Page 111 Thursday, July 1, 2004 5:49 PM
Messages
4. Enter a destination number on the Address
screen.
You can search for a number in Contacts by
pressing the Contacts soft key.
Note: To clear or clear all your input, press or press
and hold the C key. When you have no input,
press and hold the C key to move to the
previous screen.
To send the message to multiple destinations up
to 5, press the Add soft key and repeat step 4.
5. When you have finished entering the numbers,
press the Ok soft key.
6. If the Enter centre screen displays, enter the
service number and press the Ok soft key.
You can store the SMS service centre number. For
details, see page 130.
Note: When the phone fails to send the message;
Press the Retry soft key to try again the
transmission. Or, press the No soft key and the
Save soft key to save the message or exit the
menu by pressing the No soft key.
Inbox
Your phone receives incoming messages and saves
them in the Inbox. SMS is usually saved in the SIM
card, but if the SIM memory is full, the incoming
messages will be saved in the phone’s memory.
When the Inbox menu is selected, the list of
messages received displays with the:
• sender’s phone number, or name if stored in
Contacts.
111
E800English_ORA.book Page 112 Thursday, July 1, 2004 5:49 PM
Messages
• message status;
for a read message,
message to read or
for an incomplete
message.
for a
To view a message, scroll to it and press the Select
soft key. The screen shows the:
• date and time when the message was received.
• memory where the message was stored;
for
the SIM card or
for the phone’s memory.
• message contents.
You can scroll to the next or previous message by
pressing the Left or Right key.
To scroll through the message contents, press the
Up or Down key. When you focus on an object that
includes a melody, the melody is played.
You can choose the following options by pressing
the Options soft key:
Delete: allows you to delete the message.
Message reply: allows you to reply by sending a
message.
Call back: allows you to call the sender back.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Contacts.
Send: allows you to send the message to another
person.
Edit: allows you to edit the message.
Extract media: you can save media (except the
predefined EMS animations and sounds) from the
message into Media album. You can use these items
112
E800English_ORA.book Page 113 Thursday, July 1, 2004 5:49 PM
Messages
when writing a message; for further details, see
page 110.
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory or vice versa.
Outbox
Outbox stores any messages that you have already
sent or just saved without sending.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
• recipient’s phone number, or name if stored in
Contacts.
• message status;
for a sent message or
a message to send.
for
To view a message, scroll to it and press the Select
soft key. The screen shows the:
• message status;
for a sent message or
a message to send.
for
• memory where the message was stored;
for
the SIM card or
for the phone’s memory.
• message contents.
You can scroll to the next or previous message by
pressing the Left or Right key.
To scroll through the message, press the Up or
Down key.
You can choose the following options by pressing
the Options soft key:
Delete: allows you to delete the message.
113
E800English_ORA.book Page 114 Thursday, July 1, 2004 5:49 PM
Messages
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Contacts.
Send: allows you to send the message to another
person.
Edit: allows you to edit the message.
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory or vice versa.
Delete all
You can delete all messages stored in the SIM card
and phone’s memory in this menu.
1. Scroll to a message box and place a check mark
ahead of it by pressing the Select soft key.
Selecting All places check marks on all of the
message boxes.
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
Otherwise, press the No soft key.
114
E800English_ORA.book Page 115 Thursday, July 1, 2004 5:49 PM
Messages
Photo messages
Multimedia Message Service (MMS, photo message
service) is a messaging service very similar to Short
Message Service (SMS, text message service). It
provides asynchronous delivery of personal photo
messages from between phone and phone, phone
and e-mail, phone and web(by URL).
In addition to the familiar text content of text
messages, photo messages can contain images,
graphics, voice and sounds. An MMS message is a
multimedia presentation in a single entry. It is not a
text file with attachments.
Using the MMS feature, your phone can receive
photo messages. You can also send picture
messages. This function is available only if it is
supported by your service provider. Only phones
that offer picture message features can receive and
display picture messages.
Retrieving a new message
When you are retrieving a message, the Retrieving
icon (
) appears on the display. When you finish
retrieving a new message, the New message icon
(
) and a text notification showing the number of
the message appear on the display. You also hear
an alert, depending on the message sound setting;
for further details, see page 80.
To read the new message in Idle Mode, press the
View soft key. And then you see the list in the
Inbox. If you select a message, you can read it.
Notes:
• While retrieving a new message, you cannot access
WAP sites, and cannot also enter the Applications
menu (see page 74).
115
E800English_ORA.book Page 116 Thursday, July 1, 2004 5:49 PM
Messages
• To clear the new message notification on the display,
press the
key. When you also have missed
calls, voice mails (answer phone), text messages or
photo messages, and multi CBs, the right soft key
indication changes in the following order: Missed,
Connect, View, CB and Contacts.
If Msg. reception was set to Manual (for details,
see page 132), when the New message icon (
)
appears on the display, you have to retrieve
messages in the Inbox. You select a message with
the icon such as
,
and
in the Inbox. Then
you can select retrieve or delete message by
pressing the Options soft key.
Managing memory
When the memory is full, the New message icon
(
) blinks and an error message displays. (It
disappears when you press the
key, but it
reappears if you don’t delete old messages.) In this
case, you cannot receive any new messages. You
must delete one or more old messages to get free
memory for new messages using the Delete option
within the Inbox, Outbox, Draft or My folder, or the
Delete all option; for further details, see page 125.
Notes:
• You can only receive up to 150 messages.
• Photo message boxes, Camera, and Media album
share a given amount of memory in your phone. You
can also use the Delete or Delete all option to
delete some sounds or images in Camera or Media
album.
116
E800English_ORA.book Page 117 Thursday, July 1, 2004 5:49 PM
Messages
Create
This menu option allows you to create a new photo
message and then send it to multiple destinations.
1. Select one of the following items using the Up or
Down key and press the Add soft key.
Item
Subject
How to add
1. Enter a subject of your message.
For details about entering
characters, see page 42.
2. Press the Ok soft key.
Note: To return to previous screen while
entering a subject, press and hold
the C key.
Picture
To add a new picture;
1. Select the Create new option.
2. Take a photo using the camera
feature. For details about the
camera feature, see page 99.
3. Select one of pictures you want to
add. The picture is displayed.
4. Press the Add soft key.
117
E800English_ORA.book Page 118 Thursday, July 1, 2004 5:49 PM
Messages
Item
Picture
How to add
To add a picture in the Media album;
(continued)
1. Select one of the picture categories.
The picture list of the category is
displayed.
2. Select one of pictures you want to
add. The picture is displayed.
3. Press the Add soft key.
Sound
To add a new sound;
1. Select the Record new option.
2. Press the Record soft key to start
recording.
3. Press the Stop soft key to stop
recording.
4. Press the Play soft key to replay the
sound. Or, press the Add soft key to
add it. Enter the sound’s name and
press the Ok soft key. The sound is
added to the message and saved in
Media album automatically.
To add a sound in the Media album;
1. Select one of the sound categories.
The sound list of the category is
displayed.
2. Select one of the sounds you want
to add.
3. Press the Select soft key to add it.
118
E800English_ORA.book Page 119 Thursday, July 1, 2004 5:49 PM
Messages
Item
Message
How to add
1. Enter a new message. Or you can
enter a preset message.
To enter a preset message;
• Press the Options soft key and
select the Preset messages.
• Select one of the preset
messages.
2. Press the Options soft key and
select the Done option to add the
message.
Note: To return to previous screen while
entering a subject, press and hold
the C key.
2. Press the Options soft key to use the following
options.
• Preview: shows your message as it will
display on the recipient’s phone. To go back to
the message screen, press the Edit soft key.
To send the message, press the Send soft key
and go to step 4.
• Send: allows you to send the message to
another person. Refer to the next steps.
• Add page: allows you to add up to 10 pages.
You can move to each page using the Left or
Right key on the message screen.
• Page timing: allows you to set how long one
page of the received messages displays. After
a specified time, the display automatically
scrolls to the next page.
• Text effect: allows you to set the colour, size
and style of the message text.
119
E800English_ORA.book Page 120 Thursday, July 1, 2004 5:49 PM
Messages
• Clear subject/picture/sound/message:
allows you to delete the subject, image, sound
or message by selected work.
• Delete page: allows you to delete the current
page.
• Save message: saves the message in Draft
(see page 124) or My folder (see page 124).
Note: To go back to the edit screen, press the
soft key or the C key.
3. When you finish creating the message, select
Send from the options.
4. Select an entry on the Send screen.
If it is an empty entry, enter a destination as
below.
Number: to enter a destination number.
Email: to enter e-mail address.
Contacts: to enter a destination from Contacts.
After entering a destination, press the Ok soft
key.
If it is not an empty entry, do the following
things.
Edit address: to edit the selected address.
Delete address: to delete the selected address.
Note: To clear or clear all your input, press or press
and hold the C key. When you have no input,
press and hold the C key to move to the
previous screen.
5. To send the message to multiple destinations up
to 20, repeat step 4.
120
E800English_ORA.book Page 121 Thursday, July 1, 2004 5:49 PM
Messages
6. When you have finished entering the
destinations, press the Send soft key.
If you want to cancel a sending message or resend
a message that you failed to send, go to the
Outbox. Then select the message and the option
in point. For further details, see page 123.
Inbox
Your phone receives incoming messages and saves
them in the Inbox.
When the Inbox menu is selected, the list of
messages received displays with the:
• message’s subject or No subject if the message
had no subject.
• sender’s phone number, or name if stored in the
Contacts.
• message status;
for a retrieving message,
for a read message,
for a message to
read,
for a read notification message and
for a notification message to read.
Note: The icon of message status can have
various forms like
,
,
as the
priority that sender fixed (see page 131).
To view a message, scroll to it and press the Select
soft key. But you cannot view the retrieving
message.
To scroll through the message contents, press the
Up or Down key. When the message has more than
one page, you can press the Left or Right key to
move through the pages or the pages are moved
through as predefined page timer, which the sender
sets, has elapsed.
121
E800English_ORA.book Page 122 Thursday, July 1, 2004 5:49 PM
Messages
Notes:
• Some types of sound or picture may not be able to
play or display.
• When the message has an attachment like video
clips, the Attachment icon ( ) appears on the title
line. You may not play the attachment. And you may
also not extract it from the message.
You can choose the following options by pressing
the Options soft key:
Delete: deletes the message
Replay: replays the message.
Reply: replies to the sender by sending a message.
Forward: forwards the message to another person.
Call back: allows you to call the sender back.
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper or ringtone or you
can send them as a photo message.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Contacts.
Properties: shows you detailed information about
the message.
Move to My folder: moves the message to the My
folder for later use.
122
E800English_ORA.book Page 123 Thursday, July 1, 2004 5:49 PM
Messages
Outbox
Outbox stores messages that you sent, you failed to
send and you cancelled sending.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
• message’s subject or No subject if the message
had no subject.
• recipient’s phone number, or name if stored in the
Contacts.
• message status;
for a sending message,
for a sent message,
for a message that you
failed to send or you cancelled sending,
for a
delivery report. When a receiver retrieves a
message you sent and the Delivery report
option (see page 131) is set to on,
is
changed into
.
To view a message, scroll to it and press the Select
soft key. But you cannot view the sending message.
To cancel a sending message, scroll through and select
the message by pressing the Up or Down key, and
then press the Select soft key. Then the confirming
message appears. In the message, you can cancel
sending it by pressing the Yes soft key.
To resend the message that you failed to send,
scroll through and select the message by pressing the
Up or Down key, and then press the Select soft
key. Then press the Opt. soft key, and then select
the Send option.
To scroll through the message, press the Up or
Down key. When the message has more than one
page, you can press the Left or Right key to move
through the pages or the pages are moved through
as paging timing that sender fixed automatically.
123
E800English_ORA.book Page 124 Thursday, July 1, 2004 5:49 PM
Messages
You can choose the following options by pressing
the Options soft key:
Delete: deletes the message.
Replay: replays the message.
Send: send the message.
Properties: shows you detailed information about
the message.
Move to My folder: moves the message to the My
folder for later use.
Draft
This message box stores messages that you save,
interrupted messages by an incoming call, or
messages while you create a new message.
Note: Saves messages that are failed to send in the
Outbox.
To view a message, scroll to it and press the Select
soft key.
You can choose the following options by pressing
the Options soft key:
Send: replies to the sender by sending a message.
Replay: replays the message.
Delete: deletes the message.
Properties: shows you detailed information about
the message.
My folder
You can move the messages stored in the Inbox or
Outbox to the My folder by using the Move to My
folder option. While making a new message, you
124
E800English_ORA.book Page 125 Thursday, July 1, 2004 5:49 PM
Messages
can also save to My folder by using the Save
message option.
To view a message, scroll to it and press the Select
soft key.
You can choose the following options by pressing
the Options soft key:
Delete: deletes the message.
Replay: replays the message.
Send: send the message.
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper or ringtone or you
can send them as a photo message.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Contacts.
Properties: shows you detailed information about
the message.
Delete all
This menu option allows you to delete all of the
messages in each message box. You can also delete
all of your messages at one time.
1. Scroll to a message box and place a check mark
ahead of it by pressing the Select soft key.
Selecting All places check marks on all of the
message boxes.
2. If necessary, repeat step 1 to check another
box.
125
E800English_ORA.book Page 126 Thursday, July 1, 2004 5:49 PM
Messages
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
Otherwise, press the No soft key.
Push messages
This menu allows you to set to be received and read
push messages.
The following options are available:
Inbox: Your phone receives push messages and
saves them in the Inbox. And you can read push
messages in the Inbox.
Setting: This option allows you to set the push
message receiving options.
Always: always push message comes in.
Never: the push message never comes in.
Optional: Only the push messages whose setting
matches to the number in this option come in. The
preset number is SMS service centre. You can also
edit the number.
Delete all: deletes all of the push messages.
126
E800English_ORA.book Page 127 Thursday, July 1, 2004 5:49 PM
Messages
Preset messages
Using this menu, you can preset up to nine
messages that you use most frequently. When you
access this menu, the preset message list displays.
1. Scroll to a message or an empty entry by
pressing the Up or Down key.
2. Press the Select soft key and enter a new
message or change the old message.
For further details about entering characters,
see page 42.
3. Press the Ok soft key to save the message.
Answer phone
When you receive a answer phone, your phone
displays the
icon and you hear an alert.
Connect to answer phone
• In Idle Mode, when you receive a new answer
phone, press the Connect soft key to access your
answer phone server and follow the instructions
provided.
• In Idle Mode, hold the 1 key down to access your
answer phone server and follow the instructions
provided.
• Call your answer phone server number by
accessing the Connect to answer phone menu
and follow the instructions provided.
127
E800English_ORA.book Page 128 Thursday, July 1, 2004 5:49 PM
Messages
Answer phone number
Before using the answer phone service, you must
store the answer phone server number obtained
from your service provider.
When you select an entry, following options are
available.
Edit number: enter a answer phone server number
or press the Contacts soft key to enter a number
from the Contacts. And then press the Ok soft key.
Change name: enter a server name and press the
Ok soft key to save it.
Delete: when the confirming message appears,
press the Yes soft key. To cancel, press the No soft
key.
Broadcast
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately as they
are received, provided that:
• the phone is in Idle Mode.
• the Receive option (see page 129) is set to On.
• the message channel is currently active on the
channel list.
When you get broadcast messages, you can see the
messages in Idle Mode. If it is short you can see the
display, otherwise, press the CB soft key to read the
message.
128
E800English_ORA.book Page 129 Thursday, July 1, 2004 5:49 PM
Messages
In the Broadcast menu option, the following
options are available:
Read: lets you read the received broadcast
messages.
Archive: shows the list of the messages you saved
from the temporary list.
Temporary: shows the latest messages. These
messages will be gone when the phone is switched
off.
If the message is long, press the UP or Down key.
When you read a message, press the Options soft
key to access following options:
Cut number: shows the list of numbers included in
the message.
Save: (Temporary only) saves this message to
Archive list.
Delete: delete this message.
Delete all: delete all message on the list.
Receive: allows you to turn the reception of
broadcast messages on or off.
Channel: the check mark inside All check box
indicates that the channel is enabled.
To enable or disable this channel press the Select
soft key, then select Enable or Disable.
The Add channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel code obtained from your service provider
and a title for the channel.
129
E800English_ORA.book Page 130 Thursday, July 1, 2004 5:49 PM
Messages
Language: selects a language you prefer. Then,
You can get cell broadcast messages only in the
language you selected.
Settings
Text messages
Using this menu, you can set up default SMS (text
message service) information. The following options
are available:
Service centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
Validity period: allows you to set the length of
time your messages are stored at the message
centre while attempts are made to deliver them.
Message type: allows you to set the message type
to Text, Fax, Voice, ERMES, X400, or E-Mail.
The network can convert the messages into the
selected format.
Reply path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
Delivery report: allows you to set on or off. When
this function is set to on, the network informs you
whether or not your message has been delivered.
Character support: allows you to select the
character set when editing and sending messages.
GSM-alphabet: you can only send the message
using GSM characters.
130
E800English_ORA.book Page 131 Thursday, July 1, 2004 5:49 PM
Messages
Uni-code: you can send the message using Unicode
characters, including GSM alphabets. And the
maximum number of characters which can be
entered in a message is reduced to half in length.
Automatic: if you select Automatic, the phone
selects the character set according as you use
Unicode characters or not.
Photo messages
Using this menu, you can set up default settings for
sending or receiving MMS message (photo
message). The following options are available:
Send settings: The following options are available:
Priority: allows you to set the priority of message.
Validity period: allows you to set the length of time
your messages are stored at the message centre
while attempts are made to deliver them.
Delivery after: you can set the delay time before
the phone sends your messages.
Address hiding: when this option sets to On, your
phone number does not display on the recipients
phone.
Delivery report: when this option sets to On, the
network informs you whether or not your message
has been delivered.
Read reply: when this option sets to On, your
recipient’s phone sends a reply to let you know
when your message was read by her/him.
Receive settings: the following options are
available:
131
E800English_ORA.book Page 132 Thursday, July 1, 2004 5:49 PM
Messages
Msg. reception: allows you to set how you receive a
message in the home network or the roaming
network.
• Home network / Roaming network: you can
select one of Manual, Automatic and Reject.
Anonymous reject: when this option sets to On,
your phone rejects messages without a caller ID.
Adverts reject: when this option sets to On, you
can reject advertisements by service provider.
Report allowed: when this option sets to Off, your
phone does not send a reply to the recipient’s
phone even if the sender asks for the read reply.
Photo message profiles: in this menu, you can
configure Photo message profile settings that are
required when you send or receive photo messages.
Current profile: allows you to select one profile to
use currently.
Profile setting: allows you to set up to five profiles.
• Profile name: enter the name of the profile.
• Server URL: enter the address of profile server.
• GSM setting: allows you to change the proxy
settings for the GSM network.
- Gateway: enter the IP address and IP port.
- Data call type: select a network connection
type between ISDN and Analogue.
- Dial number: enter the server phone
number.
132
E800English_ORA.book Page 133 Thursday, July 1, 2004 5:49 PM
Messages
- Login ID: enter the server login ID.
- Password: enter the server password.
• GPRS setting: allows you to change the proxy
settings for the GPRS network.
- Gateway: enter the IP address and IP port.
- APN: enter the access point name used for
the address of the GPRS network gateway.
- Login ID: enter the user ID required to
connect to GPRS network.
- Password: enter the password required to
connect to the GPRS network.
• Bearer: select the bearer to be used for each type
of network accesses.
- GPRS only: it only work in GPRS network.
- GSM only: it only works in GSM network.
Memory status
You can check the memory status for messages.
Text messages
You can check how many messages are stored in
SIM card and phone’s memory.
When you have finished, press the
the
key to exit.
soft key or
133
E800English_ORA.book Page 134 Thursday, July 1, 2004 5:49 PM
Messages
Photo messages
Photo message boxes, Camera and Media album
share a given amount of memory in your phone.
The display shows the status of free and used
memory.
You can see the used memory status of photo
message boxes, Camera and Media album by
pressing the Left or Right key.
134
E800English_ORA.book Page 135 Thursday, July 1, 2004 5:49 PM
WAP
Your phone comes equipped with a WAP (Wireless
Application Protocol) Browser, making it possible for
you to access the Wireless Web.
Each time you start the WAP Browser, the phone
connects to the Wireless Web and the service
indicator icon (
or
) appears on the display to
inform you that you are connected to the Wireless
Web and will be billed accordingly. Rates vary
according to your service option.
The WAP Browser ends the network connection
after a certain period of inactivity and automatically
reconnects as necessary. For this reason, you may
find that you are billed for several network
connections within a single session. This is normal
and is designed to minimise your bill.
Home
When you select this menu option, the phone
connects to the network and loads the homepage of
the Wireless Web service provider.
Once connected, the homepage displays. The
content depends on the service provider.
Note: To quickly launch the WAP browser from Idle
Mode, long press the
key.
To scroll through the screen, use the Up and Down
keys.
To exit the browser, press the
key at any
time. The phone returns to Idle Mode.
135
E800English_ORA.book Page 136 Thursday, July 1, 2004 5:49 PM
WAP
Navigating the WAP browser
To
Press the
scroll through and
select browser
items
Up or Down key until the item
you want highlights, and then
press the
soft key.
select a numbered
item
corresponding numeric key.
return to the
previous page
return to the
startup homepage
soft key or C key.
key and select the Home
browser option. For details,
see page 136.
Entering text in the WAP browser
When you are prompted to enter text, the current
text input mode appears above the right soft key.
For further information on how to enter text, see
page 42.
Using the WAP browser menus
There are various menu options available when
surfing the Wireless Web.
To access the WAP Browser menu:
1. Press the
key or scroll to the logo on the top
left of all WAP pages and then press the
soft
key.
A list of options appears.
2. Highlight the required option using the Up or
Down key.
136
E800English_ORA.book Page 137 Thursday, July 1, 2004 5:49 PM
WAP
3. Press the
soft key to select the option.
4. If necessary, select the secondary option by
pressing the Up or Down key and then press the
soft key.
Note: The WAP Browser menus may vary,
depending on your version of the browser.
The following WAP Browser menus are available:
Back: returns to the previous page.
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
Exit: exits the WAP browser.
Reload: reloads the current page.
Show URL: shows the URL address of the WAP
page you are currently accessing.
About: shows browser information.
Using the WAP browser options
Several options are available when you are surfing
the Wireless Web. To access these options, press
the
key once connected to the Wireless Web.
Goto URL: allows you to manually enter the URL
address of the site that you wish to access.
Bookmark: allows you to use the Bookmark
menu option. For details, see page 138.
Messages: allows you to read or write an SMS
message. For details, see page 108.
Media box: allows you to use your Media album.
For details, see page 143.
137
E800English_ORA.book Page 138 Thursday, July 1, 2004 5:49 PM
WAP
Answering a call during a WAP connection
You can receive an incoming call while you are
navigating the WAP browser.
Answer the call by pressing the
key, as you
normally would. After ending the call, you can
continue navigating on the WAP page you were
previously accessing.
Bookmark
This menu option allows you to store the URL
addresses of up to 15 of your favourite Web sites.
To store a URL address:
1. Select an empty location and press the Select
soft key.
2. Enter the address and press the Ok soft key to
save it.
3. Enter the name of the bookmark and press the
Ok soft key.
For further information about how to enter text,
see page 42.
Once you have stored an address, the following
options are available when you select it.
Go: allows you to access the site directly.
Edit: allows you to change the name and URL
address of the bookmark.
Delete: allows you to delete the bookmark.
138
E800English_ORA.book Page 139 Thursday, July 1, 2004 5:49 PM
WAP
Go to URL
This menu option allows you to manually enter the
URL address of the Web site that you wish to
access.
Enter the URL address and press the Ok soft key.
For further information about how to enter text, see
page 42.
Clear cache
This menu option allows you to clear the
information stored in the cache, the phone’s
temporary memory used to store the most recently
accessed WAP pages.
Proxy settings
This menu option allows you to set up five proxy
servers.
Note: You do not need to change the browser settings
in most cases. Change the settings only when
your network provider asks you to.
For each proxy, the following options are available:
Proxy name: enter the name of the HTTP proxy
server.
GSM setting: you can change the proxy settings
for the GSM network.
Gateway: enter the IP Address and IP Port
139
E800English_ORA.book Page 140 Thursday, July 1, 2004 5:49 PM
WAP
Data call type: select a network connection type;
ISDN or Analogue.
Dial number: enter the PPP server phone number.
Login ID: enter the PPP server login ID.
Password: enter the PPP server password.
GPRS setting: you can change the proxy settings
for the GPRS network.
Gateway: enter the IP Address and IP Port.
APN: enter the access point name used for the
address of the GPRS network gateway.
Login ID: enter the user ID required to connect to
the GPRS network.
Password: enter the password required to connect
to the GPRS network.
Home URL: you can change the address of your
startup homepage.
When the default homepage displays, you can
delete it using the C key and enter your own choice.
To enter any special characters, / for example, use
the Symbolic mode; see page 49.
Bearer: you can select the bearer to be used for
each type of network accesses.
GPRS first: your phone will search for the GPRS
network first. If this service is not available, you can
set the GSM service temporarily.
GPRS only: the phone only works in GPRS
networks.
GSM only: the phone only works in GSM networks.
140
E800English_ORA.book Page 141 Thursday, July 1, 2004 5:49 PM
WAP
Current proxy
This menu option allows you to activate one of the
proxies you set up to use the WAP connection.
141
E800English_ORA.book Page 142 Thursday, July 1, 2004 5:49 PM
SAT (SIM Application
Toolkit)
If you use a SAT card that provides additional
services, the SAT menu displays. For further details,
see your SIM card instructions.
Shown only if it is supported by your SIM card.
142
E800English_ORA.book Page 143 Thursday, July 1, 2004 5:49 PM
Media album
This menu option stores various media items from
other sources, such as the WAP sites, the
EasyStudio PC software or photo messages.
Photos
This option allows you to view the taken pictures.
My photos: allow you to view the photos in my
photos.
My album1 / My album 2: allow you to view the
photos in the selected album.
When you view a photo, press the Options soft key
to do the followings.
Send: allows you to send it via a message.
Rename: allows you to rename it.
Delete: allows you to delete it.
Move to album: allows you to move it to one of
the albums.
Set as: allows you to set it as a wallpaper or a
caller ID.
Wallpaper: allows you to set it as a wallpaper.
Caller ID: allows you to set it as a caller ID.
Protection: allows you to protect it from deletion
or not.
Properties: allows you to view the detail
information of the photo.
143
E800English_ORA.book Page 144 Thursday, July 1, 2004 5:49 PM
Media album
Images
This option allows you to view the images received
from other sources, such as the WAP sites, the
EasyStudio PC software or photo messages.
When you view an image, press the Options soft
key to send, rename, delete, set as a wallpaper or
view the properties.
For further details about these options, see the
options of the Photos menu. See page 143.
Sounds
This option allows you to listen to the recorded
voices and the melodies received from other
sources, such as the WAP sites, the EasyStudio PC
software or photo messages.
Voices: allow you to listen to the recorded voices.
My sounds: allow you to listen to various melodies.
When you select a sound, press the Options soft
key to send, rename, delete, set as a ringtone (only
in My sounds) or view the properties.
For further details about these options, see the
options of the Photos menu. See page 143.
144
E800English_ORA.book Page 145 Thursday, July 1, 2004 5:49 PM
Media album
Delete all
This option deletes all of the photos, images and
sounds in the Media album.
Photos
1. Scroll to a box and place a check mark ahead it
by pressing the Select soft key.
Selecting All places check marks on all of the
boxes. If you want to delete the protected
photos and the caller ID photos, select the With
protected photos option and the With caller
ID photos option.
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the photos in the
box(es).
Otherwise, press the No soft key.
Images
When a confirming message appears, press the Yes
soft key to delete all of the images.
Otherwise, press the No soft key.
Sounds
1. Scroll to a sound box and place a check mark
ahead it by pressing the Select soft key.
Selecting All places check marks on all of the
boxes.
145
E800English_ORA.book Page 146 Thursday, July 1, 2004 5:49 PM
Media album
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the sounds in the
box(es).
Otherwise, press the No soft key
Memory status
Media album, Camera and photo message boxes
share a given amount of memory in your phone.
The display shows the status of free and used
memory.
You can see the used memory status of Media
album, Camera and photo message boxes by
pressing the Left or Right key.
146
E800English_ORA.book Page 147 Thursday, July 1, 2004 5:49 PM
Calendar
The Calendar feature enables you to:
• view the calendar and/or write a memo or to do
list.
• set the current date and time, and find out what
time it is in various cities around the world.
• set the alarm so that the phone rings at a specific
time.
• use your phone as a calculator, unit convertor,
timer or stopwatch.
New memo
This menu option allows you to create a new memo.
Note: You can also access this menu by holding down
the C key in Idle Mode.
1. Write your memo of up to 100 characters and
press the Ok soft key.
For further information about how to enter text,
see page 42.
2. Select the category of the memo to be saved
and press the Select soft key.
The following categories are available:
• Scheduler: general schedule events, such as
appointments or meetings.
• To do list: tasks you need to do. They are
saved on the to do list.
• Call: calls you need to make.
147
E800English_ORA.book Page 148 Thursday, July 1, 2004 5:49 PM
Calendar
• Anniversary: anniversaries to be
remembered, such as wedding anniversaries,
birthdays or other special days.
Note: You can save up to 25 items to each
category, so you can save 100 memos
totally.
3. Scroll to a date on the calendar by pressing the
navigation keys. Press the Select soft key.
4. If applicable depending on the category you
selected, enter the event time and press the Ok
soft key.
5. If you have selected the 12-hour time format
(see page 154), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
6. To set an alarm for the memo, press the Yes
soft key.
Otherwise, press the No soft key. The memo is
saved immediately. Go to step 10.
7. Enter the time for the alarm to sound and press
the Ok soft key.
8. If you have selected the 12-hour time format
(see page 154), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
9. Select an alarm melody and press the Select
soft key.
The memo is saved and then displays on the
screen.
10. You can choose the following option by pressing
the Options soft key:
148
E800English_ORA.book Page 149 Thursday, July 1, 2004 5:49 PM
Calendar
• Add: allows you to add a new memo on the
day.
• Delete: allows you to delete the memo.
• Edit: allows you to edit the memo.
• Move: allows you to move the memo to a
different date.
• Copy: allows you to copy the memo to a
different date.
11. When you have finished, press the
or the
key to exit.
soft key
Calendar
The calendar helps you to keep track of schedule,
calls that you need to make, tasks that you need to
do and anniversaries. You can set the alarm to ring
when the set date for a schedule is reached.
Consulting the Calendar
To
Press the
move to another
day
Left or Right key.
move to another
week
Up or Down key.
move to the
previous or next
month
Up or Down key and hold it
down
move to the
previous or next
year
Left or Right key and hold it
down.
149
E800English_ORA.book Page 150 Thursday, July 1, 2004 5:49 PM
Calendar
The following options are available when you press
the Options soft key on the Calendar display:
Add memo: allows you to add a new memo on the
day.
Go to date: allows you to enter a particular date
and then schedule an event on that date.
View all: shows all of the events that you have
scheduled.
Delete day: deletes the scheduled event on the
selected day.
Delete all: deletes all of the events that you have
scheduled.
Creating a new memo
1. Scroll to a date on the calendar, referring to
page 149, and press the Select soft key.
2. Write your memo and press the Ok soft key.
For further information about how to enter
characters, see page 42.
3. Select the category of the memo to be saved
and press the Select soft key.
The following categories are available:
• Scheduler: general schedule events, such as
appointments or meetings.
• To do list: tasks you need to do.
• Call: calls you need to make.
• Anniversary: anniversaries to be
remembered, such as wedding anniversaries,
birthdays or other special days.
150
E800English_ORA.book Page 151 Thursday, July 1, 2004 5:49 PM
Calendar
4. Follow the procedure from step 4 on page 148
onwards to save the memo.
Viewing your calendar memos
A date that has a memo associated with it is
highlighted in a red box. If you select a date when
events have already been scheduled, the number of
memos of each type is shown at the bottom of the
calendar.
•
: General schedule events
•
: To do list
•
: Calls
•
: Anniversaries
Press the Select soft key to view the memos.
If you have created more than one memo on the
same day, you can scroll to the event you want to
view by pressing the Left or Right key.
The following options are available when you press
the Options soft key:
Add: allows you to add a new memo. For further
information about how to add a memo, see
page 147.
Delete: allows you to delete the memo.
Edit: allows you to edit the memo.
Move: allows you to move the memo to a different
date.
Copy: allows you to copy the memo to a different
date.
151
E800English_ORA.book Page 152 Thursday, July 1, 2004 5:49 PM
Calendar
To do list
This menu allows you to view a list of tasks.
To create a new memo of the To do list type:
1. Write the memo about your task and press the
Ok soft key.
For more information about how to enter
characters, see page 42.
2. Scroll to a date on the calendar, referring to
page 149, and press the Select soft key.
3. Follow step 4 on page 148 onwards to save the
memo.
Once you have defined tasks, they are listed with a
status mark (
for Done or
for Undo) within
the To do list menu.
To scroll to a specific task, press the Up or Down
key and press the Select soft key. The task displays
with the deadline, alarm setting, job details and
status mark.
You can scroll to the previous or next task by
pressing the Left or Right key.
The following options are available when you press
the Options soft key:
Add: allows you to add a new task. For details
about adding To do list-type memos, see page 147.
Mark: allows you to change the status mark.
Edit: allows you to edit the contents of the task.
Move: allows you to move the task to a different
date.
152
E800English_ORA.book Page 153 Thursday, July 1, 2004 5:49 PM
Calendar
Copy: allows you to copy the task to a different
date.
Delete: allows you to delete the task.
Delete all: allows you to delete all of tasks from
the list.
Clock
This option allows you to change the current time
and date displayed. You can also check the current
time for Greenwich Mean Time (GMT) and 22 major
cities around the world.
The following options are available:
Set time: allows you to enter the current time. You
can choose the time format in the Set format
menu option; see page 154.
Note: Before setting the time, you must specify your
time zone in the Set world time menu option.
Set date: allows you to enter the day, month and
year. You can change the date format in the Set
format menu option; see page 154.
Set world time: allows you to check the current
time in GMT and 22 major cities around the world.
Scroll through the cities using the Left or Right key.
The screen shows the:
• city name.
• current date and time.
• time difference between the selected city and
your city if you have set the local time (see
below) or GMT (by default).
153
E800English_ORA.book Page 154 Thursday, July 1, 2004 5:49 PM
Calendar
To select your time zone:
1. Select the city corresponding to your time zone
by pressing the Left or Right key one or more
times.
The local date and time display.
2. Press the Set soft key.
3.
To
Select
update the current Set local.
date/time with this
new setting
indicate that the
time zone is
currently using the
daylight saving
time
Set DST. The
icon is
shown next to the time
difference.
indicate that the
time zone is no
longer using the
daylight saving
time
Remove DST (only
available when the
icon is shown next to the
time difference).
4. When you have finished, press the
the
key to exit.
soft key or
Set format: allows you to change the time and
date formats.
Time format: 24 hours
12 hours
Date format: DD/MM/YYYY (day/month/year)
YYYY/MM/DD (year/month/day)
154
E800English_ORA.book Page 155 Thursday, July 1, 2004 5:49 PM
Calendar
Alarm
This option allows you to set an alarm to ring at a
specific time. You can set up to three alarms or set
the phone to ring an alarm when it is switched off.
To set an alarm:
1. Select either Morning call, Alarm1 or Alarm2
by pressing the Up or Down key.
The
icon means that no alarm is currently
set. The
icon means that an alarm has
already been set.
2. Press the Select soft key.
3. Press the Options soft key.
4. Scroll to an option by pressing the Up or Down
key and press the Select soft key. Change the
setting, as needed.
• Alarm day: place or remove a check mark on
the day(s) of the week by pressing the Select
soft key. If you want to set a daily alarm,
select Everyday. If you want to set a
temporary alarm, select Once alarm. When
you press the Ok soft key after selecting, your
phone asks you to enter the alarm time.
• Alarm time: enter the time for the alarm to
sound.
• Alarm tone: select an alarm melody.
• Remove alarm: deactivates the alarm.
Note: The alert type of Alarm1 and 2 is affected by
the alert type of incomming call. Moring call’s
alert type is always melody.
5. Repeat step 4 to change each setting.
155
E800English_ORA.book Page 156 Thursday, July 1, 2004 5:49 PM
Calendar
6. When you have finished, press the
the
key to exit.
soft key or
Once an alarm has been set, you can see the Alarm
icon ( ) on the top line of the display. To stop the
alarm when it rings, press any key.
Note: When the Quiet Mode is activated, the alarm
tone doesn’t sound. But When you set an
Morning call, it sounds the alarm tone even if
the Quiet Mode is activated.
To set the alarm to ring even if your phone is
switched off:
1. Scroll to Auto power on the Alarm list and
press the Select soft key.
2. If necessary, press the Up or Down key to select
On.
To turn the Auto Power feature off, select Off.
3. Press the Select soft key to save the setting.
4. When you have finished, press the
the
key to exit.
soft key or
Once you have activated the auto power alarm, a
check mark appears ahead of Auto power. If the
phone is switched off at the specified alarm time, it
automatically switches on and rings the alarm. It
then automatically switches off again.
To turn off an alarm:
• Press the Confirm soft key.
• When the mornig call’s alarm tone sounds, press
any key or the Snooze soft key to stop the alarm
for five minutes, after which it will resume. You
can do this a maximum of five times.
156
E800English_ORA.book Page 157 Thursday, July 1, 2004 5:49 PM
Calendar
The snooze alarm tone sounds while the phone is
switched off and the Auto power is set to on, and
the Quiet Mode is activated. If you reset the moring
call’s alarm time or deactivate the morning call’s alarm
, the snooze alarm is cancelled.
Calculator
You can use the phone as a calculator. The
calculator performs basic arithmetic functions, such
as addition, subtraction, multiplication, division and
remainder computation.
To perform a calculation:
1. Enter the first number using the number keys.
Note: To erase any mistakes or clear the display,
press the C key.
2. Press the
key to enter a decimal point (.) or
the
key to enter the appropriate arithmetic
symbol: + (add), - (subtract),
(multiply), /
(divide), % (remainder), ( or ).
3. Enter the second figure.
4. Repeat steps 2 and 3, if necessary.
5. Press the Equal soft key to view the result.
The result appears in the Answer box.
Note: The result is rounded to six decimal places.
6. When you have finished, press the
the
key to exit.
soft key or
157
E800English_ORA.book Page 158 Thursday, July 1, 2004 5:49 PM
Calendar
Conversion
This menu option allows you to convert from one
type of unit to another.
To convert a value:
1. Scroll to the type of conversion to be performed
from Currency, Length, Weight, Volume,
Area and Temperature, and press the Select
soft key.
2. Enter the value to be converted and press the
Down key to move to the From field.
You can enter a decimal point (.) using the
key. And you can enter a minus (-) using the
key in Temperature.
3. Select the original unit by pressing the Left or
Right key and press the Down key to move to
the To field.
Refer to the table on the following page for the
units available.
4. Select the required unit by pressing the Left or
Right key.
5. Press the Ok soft key or the
result.
key to view the
The result appears in the Answer box.
6. When you have finished, press the
the
key to exit.
158
soft key or
E800English_ORA.book Page 159 Thursday, July 1, 2004 5:49 PM
Calendar
Units Available
Type
Currency
Units
EURO
DEM
ITL
FRF
ESP
NLG
ATS
BEF
FIM
PTE
GRD
IEP
LUF
Length
Weight
Volume
mm
cm
m
km
in
ft
yard
mile
g
kg
ton
grain
oz
pound
3
cm
m3
l
in3
ft3
yd3
gal
Area
cm2
m2
a
in2
ft2
yd2
acre
Temperature
°C
°F
Timer
Using the Timer feature, you can set the phone to
sound an alarm after a certain time.
1. Press the Set soft key.
2. Enter the length of time you want to count down
in hours and minutes and press the Ok soft key.
3. Press the Start soft key to start counting down.
159
E800English_ORA.book Page 160 Thursday, July 1, 2004 5:49 PM
Calendar
Even if you exit the Timer screen, the timer will
continue running. After the specified time has
expired, the phone informs you by playing a melody
and displaying a text notification.
To stop the timer melody when it rings, press any
key.
To stop the timer before the end, press the Stop
soft key on the Timer screen.
Notes:
• The timer uses power from the battery consequently,
the phone’s operating time is reduced.
• When the Quiet Mode is activated, there is no sound.
Stopwatch
The stopwatch can be used to measure times for
various sports.
Example: Running or swimming races
Up to four stopwatches can be used.
The precision of the stopwatch is one hundredth of
a second. The maximum measurement time is 10
hours.
1. To start the stopwatches, press the Ok soft key.
2. When you wish to stop the first stopwatch, press
the Ok soft key. Repeat this step for the other
stopwatches.
3. Press the Reset soft key to reset the watches.
4. Press the C or
160
key to exit.
E800English_ORA.book Page 161 Thursday, July 1, 2004 5:49 PM
Using ALS (Alternate
Line Service)
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make
and receive calls on either line. If you subscribe to
this network service, a few additional menu options
enable you to set up this feature.
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to ALS.
Selecting a line
You can select a line for each call via the Active
line menu option. For further details, refer to
page 94.
Editing the line name
You can edit the name of each line via the Own
number menu option.
When you edit the name of a line, this name
replaces “Line 1” or “Line 2”, as applicable. For
further details, refer to page 67.
Setting the ring type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each
line via the Incoming calls menu option. For
further details, see page 79.
161
E800English_ORA.book Page 162 Thursday, July 1, 2004 5:49 PM
Using ALS (Alternate Line Service)
Setting call diverting options
You can set up call diverting via the Call diverting
menu option. This service reroutes incoming calls
on the line of your choice to a specified number. For
further details, see page 88.
Viewing call information
You can view call times and last call cost
information for each line. For further details, see
page 72.
162
E800English_ORA.book Page 163 Thursday, July 1, 2004 5:49 PM
Solving problems
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
When you switch your phone on, the
following messages may appear
No SIM card
Check that the SIM card is correctly installed.
Phone locked Enter password
The Phone lock feature is enabled. You must enter
the phone’s password before you can use the
phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, you must enter the PIN. To
disable this feature, use the PIN check menu
option. See page 85.
Enter PUK
The PIN was entered wrongly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your network operator.
163
E800English_ORA.book Page 164 Thursday, July 1, 2004 5:49 PM
Solving problems
“No service” displays
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded
by buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialled
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone (Mute
appears)?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
164
E800English_ORA.book Page 165 Thursday, July 1, 2004 5:49 PM
Solving problems
The phone starts beeping and “Battery
Low” flashes on the display
The battery is insufficiently charged. Replace the
battery and recharge it.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
Contacts entry
• Check that the number has been stored correctly,
by using the Contacts Search feature.
• Re-store them, if necessary.
If the above guidelines do not help you to solve
the problem, take a note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
165
E800English_ORA.book Page 166 Thursday, July 1, 2004 5:49 PM
Access codes
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
Some access codes can be changed using the
Security menu option. See page 85 for further
details.
Phone password
The Phone lock feature (see page 86) uses the
phone password to protect your phone against
unauthorised use.
The phone password is supplied with the phone and
is preset to “00000000” at the factory. To change
the password, use the Change password menu
option. See page 86.
PIN
The PIN (Personal Identification Number) protects
your SIM card against unauthorised use. It is
usually supplied with the SIM card. When the PIN
Check feature is enabled (see page 85), you must
enter the PIN each time you switch on the phone.
If you key in an incorrect PIN three times in
succession, key in the PUK and press the Ok soft
key to unlock the phone. Key in a new PIN and
press the Ok soft key. Key in the new PIN again and
press the Ok soft key.
166
E800English_ORA.book Page 167 Thursday, July 1, 2004 5:49 PM
Access codes
PIN2
The PIN2, supplied with some SIM cards, is required
to access some functions, such as charging unit
counters. These functions are only available if
supported by your SIM card.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press the Ok soft
key to unlock the phone. Key in a new PIN2 and
press the Ok soft key. Key in the new PIN2 again
and press the Ok soft key.
PUK
The PUK (PIN Unblocking Key) is required to change
a blocked PIN. The PUK may be supplied with the
SIM card. If not, contact your local service provider.
If you key in an incorrect PUK ten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
You cannot change the PUK. If you lose the code,
contact your service provider.
PUK2
The PUK2, supplied with some SIM cards, is
required to change a blocked PIN2.
If you key in an incorrect PUK2 ten times in
succession, you cannot use the functions requiring
the PIN2. Contact your service provider for a new
card.
167
E800English_ORA.book Page 168 Thursday, July 1, 2004 5:49 PM
Access codes
You cannot change the PUK2. If you lose the code,
contact your service provider.
Call barring password
The 4-digit call barring password is required when
you use the Call Barring function. You obtain the
password from your service provider when you
subscribe to this function.
You can change this password using the Change
barring password menu option. For further
details, see page 92.
168
E800English_ORA.book Page 169 Thursday, July 1, 2004 5:49 PM
Health and safety
information
SAR certification information
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
the EU Council is 2.0W/kg.*
The Highest SAR Value for this model
phone was 0.357 W/kg.
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body
tissue. The limit incorporates a substantial margin of
safety to give additional protection for the public and to
account for any variations in measurements. The SAR
values may vary depending on national reporting
requirements and the network band.
169
E800English_ORA.book Page 170 Thursday, July 1, 2004 5:49 PM
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a new model phone is available for sale to
the public, compliance with the European R&TTE
Directive must be shown. This directive includes as
one of its essential requirements the protection of
the health and safety of the user and any other
person.
Precautions when using batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will gradually
170
E800English_ORA.book Page 171 Thursday, July 1, 2004 5:49 PM
Health and safety information
wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal,
it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
171
E800English_ORA.book Page 172 Thursday, July 1, 2004 5:49 PM
Health and safety information
Road safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you are
following the special regulations in a given area or
country.
Operating environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
172
E800English_ORA.book Page 173 Thursday, July 1, 2004 5:49 PM
Health and safety information
Electronic devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
• should not carry the phone in a breast pocket
• should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
173
E800English_ORA.book Page 174 Thursday, July 1, 2004 5:49 PM
Health and safety information
Other medical devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch off your phone
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially explosive atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
174
E800English_ORA.book Page 175 Thursday, July 1, 2004 5:49 PM
Health and safety information
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
Emergency calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
175
E800English_ORA.book Page 176 Thursday, July 1, 2004 5:49 PM
Health and safety information
emergency number). Emergency numbers vary
by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
Other important safety information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment
in your vehicle is mounted and operating
properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
176
E800English_ORA.book Page 177 Thursday, July 1, 2004 5:49 PM
Health and safety information
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
Care and maintenance
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
177
E800English_ORA.book Page 178 Thursday, July 1, 2004 5:49 PM
Health and safety information
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
178
E800English_ORA.book Page 179 Thursday, July 1, 2004 5:49 PM
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features of your mobile phone,
here are a few definitions.
ALS (Alternate Line Service)
Capability of associating two lines with one SIM
card. With this service, you can make and receive
calls on either line, as required.
Call barring
Ability to restrict outgoing and incoming calls.
Call diverting
Ability to reroute calls to another number.
Call holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call waiting
Ability to inform users that they have an incoming
call when engaged on another call.
CLI (Caller Line Identification) services
Services allowing subscribers to view or block the
telephone numbers of callers.
179
E800English_ORA.book Page 180 Thursday, July 1, 2004 5:49 PM
Glossary
EMS (Enhanced Message Service)
Network service sending and receiving messages
that include images, sounds and animations to and
from another user without having to speak to the
correspondent.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS guaranties continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
GSM (Global System for Mobile
Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
IrDA (Infrared Data Association)
A standard defined by the IrDA consortium. It
specifies a way to wirelessly transfer data via
infrared radiation. The IrDA specifications include
standards for both the physical devices and the
protocols they use to communicate with each other.
MMS (Multimedia Message Service, Photo
message service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
180
E800English_ORA.book Page 181 Thursday, July 1, 2004 5:49 PM
Glossary
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can also be sent by
e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and later also video clips and presentation
information.
Multiparty calling
Ability to establish a conference call involving up to
five additional parties.
PIN (Personal Identification Number)
Security code that protects the phone/SIM against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
SDN (Service Dialling Numbers)
181
E800English_ORA.book Page 182 Thursday, July 1, 2004 5:49 PM
Glossary
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
SMS (Short Message Service, Texm message
Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft Keys
Two keys marked
purpose of which:
and
on the phone, the
• varies according to the function that you are
currently using
• is indicated on the bottom line of the display just
above the corresponding key
Voice mail (Answer phone)
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
182
E800English_ORA.book Page 183 Thursday, July 1, 2004 5:49 PM
Index
A
ABC mode • 42, 46
Access codes • 166
Accessories • 9
Active line
select • 94
service, use • 161
Alarm, set • 155
Alert type • 80
ALS • 161
Autopower alarm • 156
B
background image, set • 83
Backlight • 17
Barring
calls • 90
Battery
charging • 22
installing • 20
low battery indicator •
23
precautions • 170
removing • 21
Broadcast • 128
Browser, WAP • 135
C
Calculator • 157
Calendar • 147, 149
Caller
groups • 68
ID • 94
Calls
alert type • 80
answering • 31
a second call • 37
barring • 90
costs • 72
dialled • 71
diverting • 88
emergency • 175
ending • 31
history • 70
holding • 36
international • 29
log • 29
making • 28
missed • 30, 70
multi-party • 38
received • 70
redialling • 29
automatically • 95
rejecting • 31
ring tone • 79
searching for a number
in contacts • 57
times • 72
waiting • 37, 92
Card, SIM
dialling numbers • 63
inserting • 19
locking • 87
removing • 20
Care • 177
Characters
entering • 42
Clock • 153
Conference calls • 38
Connection tone • 81
Contacts • 57
copying numbers • 59
deleting numbers • 59
editing numbers • 59
erasing numbers • 59
memory status • 69
sending SMS • 59
storing numbers/names
• 60
Conversion, unit • 158
Cost of calls • 72
D
Date, set • 153
Dialled calls • 71
Dialling • 28
SIM card numbers • 63
Display
brightness • 84
icons • 15
language • 84
DTMF tones, send • 34
183
E800English_ORA.book Page 184 Thursday, July 1, 2004 5:49 PM
Index
E
Ear-microphone • 41
Earpiece volume • 32
Emergency calls • 175
F
FDN mode • 87
Fixed Dial Number mode • 87
Functions, select • 25
G
Games • 74
Greeting message • 95
Group settings • 68
I
Icons • 15
Inbox • 111, 121
Input mode
changing • 43
language, set • 84
International calls • 29
Internet • 135
K
Key tones
type, select • 81
volume • 32
Keys
location • 10
L
Language, set • 84
LCD
brightness • 84
icons • 15
settings • 83
Length of calls • 72, 82
Letters
entering • 42
Locking
phone • 86
184
SIM card • 87
Loudspeaker • 32
Low battery indicator • 23
M
Maintenance • 177
Media album • 143
Memory status, contacts • 69
Memos
making • 147, 150
viewing 151
Menu
list • 51
scrolling • 50
Messages
MMS • 115
SMS • 108
Messages • 108
alert types • 80
answer phone • 127
broadcast • 128
deleting • 114, 125
greeting • 95
inbox • 111, 121
outbox • 113, 123
preset • 127
reading • 111
ring tone • 80
writing • 109
Microphone, mute • 33
Minute minder • 82
Missed calls • 30, 70
Multi-party calls
making • 38
private conversation •
40
removing a participant •
40
N
Names
entering • 42
searching/dialling • 57
storing • 60
Network selection • 93
E800English_ORA.book Page 185 Thursday, July 1, 2004 5:49 PM
Index
Network services • 88
Numbers
correcting • 28
FDN • 87
mode • 42, 49
speed-dial • 61
storing • 60
O
Options, select • 25
Outbox • 113, 123
P
Password
barring • 92, 168
phone • 86, 166
Personal Identification
Number • 166
Phone
layout • 10
settings • 79
switching on/off • 24
PIN • 166
changing • 85
checking • 85
PIN2 • 167
changing • 87
Power on/off tone • 81
Preset messages • 127
Problem, solve • 163
PUK • 167
PUK2 • 167
Q
Quiet mode • 82
R
Received calls • 70
Redialling
automatically • 95
Reset settings • 98
Ringer
incoming calls • 80
messages • 80
Road safety • 172
S
Safety
batteries • 170
electronic devices • 173
explosive atmospheres •
174
information • 169, 176
medical devices • 174
operating environment •
172
precautions • 7
road • 172
SAT • 142
Second call, answer• 37
Security settings • 85
Service directory, dial • 69
Settings
alarm • 155
date • 153
display • 83
network • 88
phone • 79
reset • 98
security • 85
sound • 79
text language • 84
time • 153
SIM card
dialling numbers • 63
inserting • 19
locking • 87
removing • 20
SMS • 108
Soft keys, use • 25
Sound settings • 79
Speed-dialling • 61
Stopwatch • 160
Switching on/off
microphone • 33
phone • 24
Symbolic mode • 42, 49
185
E800English_ORA.book Page 186 Thursday, July 1, 2004 5:49 PM
Index
T
T9 mode • 42, 44
Text
entering • 42
input modes • 42
language • 84
Time
setting • 153
world • 153
Timer • 159
To do list • 152
Tone
connection • 81
keypad • 81
message • 80
power on/off • 81
Travel adapter • 22
V
Voiceclarity • 36
Volume
call ringer • 80
earpiece • 32
keys • 32
W
Waiting call • 37, 92
WAP Browser • 135
World time • 153
WWW Services • 135
186
➃ Press the Select soft key
to confirm.
➂ Scroll with the Up or
Down key through the
list of options until the
required option is
selected.
➁ Scroll with the navigation
keys through the main
menus until you reach
the required menu. And
the press the Select soft
key.
➀ Press the Menu soft key
in Idle Mode.
Each of the two soft keys (
and
)
performs the function indicated by the
text above them, on the bottom line on
the display.
Access
the Menu
Functions
➀ Enter the number.
➁ Press the
key.
Make a Call
Press the
Press the volume keys
on the left side of the
phone.
Answer a
Call
Adjust the
Volume
key.
Press the
End a Call
key.
Press and hold the
key.
Switch On/
Off
SGH-E800 GPRS telephone
Quick reference card
E800English_ORA.book Page 187 Thursday, July 1, 2004 5:49 PM
187
E800English_ORA.book Page 188 Thursday, July 1, 2004 5:49 PM
In Idle Mode, hold down the
appropriate key (2 to 9).
Or, press the key and the
key.
key twice.
SpeedDial
Enter the SIM location,
press the
key, and press
the
key.
Press the
Dial a
Number
in Your
SIM Card
Press and hold the 1 key.
Redial the
Last
Number
Listen to
Your
Answer
phone
Search for
a Number
in Contacts
Store
Numbers in
Contacts
➀ Press the Contacts
soft key in Idle Mode.
➁ Select Find name.
➂ Enter a name.
➃ Press the Ok soft key.
➄ Press the Left or Right
key, if necessary.
➅ Press the
key to dial.
➀ Enter the number.
➁ Press the Save soft
key.
➂ Select the memory
type and press the
Select soft key.
➃ If you select Phone,
select the number type
and press the Select
soft key.
➄ Enter the name and
press the Ok soft key.
➅ If you select SIM, enter
the location number and
press the Ok soft key.
188
E800English_ORA.book Page 189 Thursday, July 1, 2004 5:49 PM
Download PDF

advertising