Samsung | SGH-T400 | Samsung SGH-T400 User Manual

DUAL BAND
GSM TELEPHONE
SGH-T400
OWNER’S MANUAL
ELECTRONICS
Printed in Korea
Code No.: GH68-03562A
English. 2003/03. Rev.1.0
GLOBAL SYSTEMS FOR
MOBILE COMMUNICATIONS
Contents
Important Safety Precautions. . . . . . . . . . . . . . .
7
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Phone Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Service Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . 17
Installing the SIM Card and the Battery . . . . . . . .
Charging a Battery . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the Phone On/Off . . . . . . . . . . . . . . . . . .
Using the Ear-Microphone . . . . . . . . . . . . . . . . . . . .
17
19
22
23
Call Functions . . . . . . . . . . . . . . . . . . . . . . . . . 24
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . .
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Missed Calls . . . . . . . . . . . . . . . . . . . . . . . .
In-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24
26
27
28
30
Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Storing a Phone Number with a Name . . . . . . . . .
Using the Phonebook Options . . . . . . . . . . . . . . . . .
Speed-Dialling by SIM Memory Location . . . . . . .
Searching for and Dialling a Number
in the Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dialling a Number Using the Service Directory
or Information Numbers . . . . . . . . . . . . . . . . . . . . .
37
38
41
42
43
The information in this manual is believed to be correct at
the time of printing; Samsung reserves the right, however,
to change or modify any of the specifications
without notice. Some of the contents in this manual may
differ from your phone, depending on the software
installed, your SIM card or your service provider.
3
Contents (continued)
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Changing the Text Input Mode . . . . . . . . . . . . . . . .
Using the T9 Mode . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the ABC Mode . . . . . . . . . . . . . . . . . . . . . . . .
Using the Number Mode . . . . . . . . . . . . . . . . . . . . .
Using the Symbolic Mode . . . . . . . . . . . . . . . . . . . .
Ring Tone (Menu 4-1) . . . . . . . . . . . . . . . . . . . . . . . .
Melody Composer (Menu 4-2) . . . . . . . . . . . . . . . . .
Ring Volume (Menu 4-3) . . . . . . . . . . . . . . . . . . . . . .
Alert Type (Menu 4-4) . . . . . . . . . . . . . . . . . . . . . . . .
Keypad Tone (Menu 4-5). . . . . . . . . . . . . . . . . . . . . .
Message Tone (Menu 4-6) . . . . . . . . . . . . . . . . . . . .
Power On/Off (Menu 4-7) . . . . . . . . . . . . . . . . . . . . .
Error Tone (Menu 4-8). . . . . . . . . . . . . . . . . . . . . . . .
Minute Minder (Menu 4-9) . . . . . . . . . . . . . . . . . . . .
Connect Tone (Menu 4-10) . . . . . . . . . . . . . . . . . . . .
45
46
48
50
50
Selecting Functions and Options . . . . . . . . . . . . . 51
Using the Menus . . . . . . . . . . . . . . . . . . . . . . . 53
Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Call Records . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Missed Calls (Menu 1-1) . . . . . . . . . . . . . . . . . . . . . .
Received Calls (Menu 1-2) . . . . . . . . . . . . . . . . . . . .
Dialled Calls (Menu 1-3) . . . . . . . . . . . . . . . . . . . . . .
Call Time (Menu 1-4) . . . . . . . . . . . . . . . . . . . . . . . . .
Call Cost (Menu 1-5) . . . . . . . . . . . . . . . . . . . . . . . . .
57
57
58
58
59
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Voice Mail (Menu 2-1) . . . . . . . . . . . . . . . . . . . . . . . .
Read Messages (Menu 2-2) . . . . . . . . . . . . . . . . . . .
Write Messages (Menu 2-3) . . . . . . . . . . . . . . . . . . .
Preset Message List (Menu 2-4) . . . . . . . . . . . . . . .
Setup (Menu 2-5) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Broadcast (Menu 2-6) . . . . . . . . . . . . . . . . . . . . . . . .
Picture Messages (Menu 2-7) . . . . . . . . . . . . . . . . .
60
61
63
64
64
65
67
Voice Functions . . . . . . . . . . . . . . . . . . . . . . . . 69
Voice Dial (Menu 3-1) . . . . . . . . . . . . . . . . . . . . . . . .
Voice Command (Menu 3-2) . . . . . . . . . . . . . . . . . . .
Voice Memo (Menu 3-3) . . . . . . . . . . . . . . . . . . . . . .
AnswerPhone (Menu 3-4) . . . . . . . . . . . . . . . . . . . . .
4
69
71
72
73
74
75
77
77
78
78
78
79
79
79
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Phone Settings (Menu 5-1). . . . . . . . . . . . . . . . . . . .
Network Services (Menu 5-2) . . . . . . . . . . . . . . . . .
Security Settings (Menu 5-3) . . . . . . . . . . . . . . . . . .
LCD/LED Settings (Menu 5-4). . . . . . . . . . . . . . . . . .
Browser Settings (Menu 5-5). . . . . . . . . . . . . . . . . .
80
86
95
98
100
Organiser . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Scheduler (Menu 6-1) . . . . . . . . . . . . . . . . . . . . . . . .
Alarm (Menu 6-2) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator (Menu 6-3) . . . . . . . . . . . . . . . . . . . . . . . .
To Do List (Menu 6-4) . . . . . . . . . . . . . . . . . . . . . . . .
Calendar (Menu 6-5) . . . . . . . . . . . . . . . . . . . . . . . . .
World Time (Menu 6-6) . . . . . . . . . . . . . . . . . . . . . . .
Clock (Menu 6-7) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Conversion (Menu 6-8) . . . . . . . . . . . . . . . . . . . . . . .
Timer (Menu 6-9) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stopwatch (Menu 6-10) . . . . . . . . . . . . . . . . . . . . . .
101
103
105
107
108
109
110
111
113
114
5
Contents (continued)
Important Safety
Precautions
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Bowling (Menu 7-1). . . . . . . . . . . . . . . . . . . . . . . . . 116
Speed Up (Menu 7-2) . . . . . . . . . . . . . . . . . . . . . . . 116
Honey Ball (Menu 7-3) . . . . . . . . . . . . . . . . . . . . . . 117
WWW Services . . . . . . . . . . . . . . . . . . . . . . . . 119
Home (Menu 8-1). . . . . . . . . . . . . . . . . . . . . . . . . . .
Bookmark (Menu 8-2) . . . . . . . . . . . . . . . . . . . . . . .
Goto (Menu 8-3). . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigating with the WAP Browser . . . . . . . . . . . .
Entering Text, Numbers or Symbols . . . . . . . . . . .
119
120
121
121
123
Additional Services . . . . . . . . . . . . . . . . . . . . 124
ALS (Alternate Line Service) . . . . . . . . . . . . . . . . . 124
Solving Problems . . . . . . . . . . . . . . . . . . . . . . 126
Reference Information . . . . . . . . . . . . . . . . . . 129
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Health and Safety Information . . . . . . . . . . . . . . . 132
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Quick Reference Card . . . . . . . . . . . . . . . . . . . 153
Read these guidelines before using your wireless
phone. Failure to comply with them may be dangerous or illegal. For more detailed safety information,
see “Health and Safety Information” on page 132.
Road Safety at All Times
Do not use a hand-held phone while driving; park the
vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any rules or regulations in force.
Interference
All wireless phones may be subject to interference,
which may affect their performance.
Special Regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden to use it, or when it may cause interference or
danger (in a hospital for example).
6
7
Important Safety Precautions
Unpacking
Radio Frequency Exposure
The design of this phone complies with European
Union (EU) requirements relating to radio frequency
(RF) exposure. To maintain compliance with these
requirements, use only Samsung-supplied or
approved accessories. Use of non-approved
accessories may violate the requirements.
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Your package contains the following items.
Phone
Travel Adapter Hand Strap
Batteries
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Qualified Service
Only qualified service personnel may install or repair
your phone.
Owner’s Manual Battery Charger
Wearable
Ear-Microphone
In addition, you can obtain the following accessories
for your phone from your local Samsung dealer:
• Cigarette lighter adapter
• Content download kit
• Car cradle
• Simple hands-free kit
• Standard battery
• Data kit
Note: There is a rubber dust cover fitted to the
connector on the bottom of the phone for
protection during shipment. When unpacking
the product, remove this cover and dispose of
it along with any other unwanted packaging.
8
9
Your Phone
Your Phone
Phone Layout
Closed Vi e w
The following illustrations show the main elements
of your phone.
Antenna
Service light
Open Vi e w
Earpiece
External display
Display
Volume
During a call,
adjust the
earpiece volume.
In idle mode with
the phone open,
adjust the key
volume.
When held down
with the phone
closed, reject an
incoming call.
Key
(soft keys)
Microphone
10
Description
Perform the functions indicated by the text
above them (on the bottom line of the
display).
In the menu facility, scroll through the
menu options and phonebook memory.
In idle mode,
allows you to access
the Messages menu,
allows you to
access the Ring Tone menu.
11
Your Phone
Your Phone
Key
Description
(continued)
Display
Deletes characters from the display.
Display Layout
In idle mode, launches the WAP Browser
directly.
The display comprises three areas.
Makes or answers a call.
In idle mode, recalls the last number dialled,
received or missed.
In the menu facility, selects a menu function
or stores information that you have entered
(such as a name) in the phone or SIM
memory.
Icons
Text and
graphic area
Ends a call. When held down, switches the
phone on and off.
In the menu facility, cancels your input and
returns to the idle mode.
~
When held down in idle mode, accesses
your voice mail.
Enter numbers, letters and some special
characters.
Used for various purposes in different
functions.
When held down while entering a number,
enters a pause.
When held down in idle mode,
activates/deactivates the silent mode.
12
Menu
PhoneBook
Soft keys
Area
Description
First line
Displays various icons (see page 14).
Middle lines
Display messages, instructions and
any information that you enter
(number to be dialled, for example).
Last line
Shows the functions currently
assigned to the two soft keys.
13
Your Phone
Icons
Backlight
Shows the received signal strength. The
greater the number of bars, the stronger
the signal.
Appears when a call is in progress.
Appears when the phone can not find a
signal.
Appears when a new text message has
been received.
Appears when a new voice mail message
has been received.
Appears when the vibrate mode is on;
the phone vibrates rather than rings
when you receive a call.
Appears when you set an alarm.
Shows the level of your battery. The
more bars you see, the more power you
have left.
14
Your Phone
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
illuminates. It turns off if no key is pressed within a
given period of time, depending on the Backlight
option set in the Phone Settings menu. The
backlight remains on at all times when the phone is
connected to an optional car kit.
To specify the length of time for which the backlight
is active, set the Backlight menu option; see
page 82 for further details.
External Display
Your phone has an external display on the cover,
showing the signal strength and battery strength. It
indicates that you have an incoming call or message,
notifies you of any missed calls, indicates whether
the vibrate mode is on and notifies you at the
specified time when you set an alarm.
When you hold down one of the volume keys in idle
mode with the phone closed, the external display
backlight illuminates.
15
Your Phone
Getting Started
Service Light
Installing the SIM Card and the Battery
The service light is in the top right-hand corner of the
phone. It flashes when services are available on the
phone.
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
To activate or deactivate use of the service light, set
the Service Light menu option; see page 83 for
further details.
• Keep all miniature SIM cards out of the reach of
small children.
• The SIM card and its contacts can easily be
damaged by scratches or bending, so be careful
when handling, inserting or removing the card.
• Before installing the SIM card, always make sure
that the phone is switched off before you remove
the battery.
Service light
1. If necessary, switch off the phone by holding
down
until the closing animation is
displayed.
2. Push the catch above the battery on the back of
the phone and hold it in this position. Lift the
battery away.
16
17
Getting Started
3. Insert and slide the SIM card under the two tabs,
ensuring that the notched corner is top left and
the gold contacts of the card face into the phone.
Getting Started
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
standard battery is fully recharged in
approximately 160 minutes.
Using a Travel Adapter
The phone can be used while the battery is charging.
4. Place the battery back on the phone. First insert
the teeth on the bottom of the battery into the
corresponding slots, then push the battery against
the back of the phone until it clicks into place.
Make sure that the battery is properly installed
before switching the phone on.
18
1. Connect the travel adapter connector into the
bottom of the phone. Check that the arrow on
the lead connector is facing towards the front of
the phone.
19
Getting Started
Getting Started
Low Battery Indicator
2. Connect the adapter to a standard AC wall outlet.
When the battery is charging, the battery icon
in the top right-hand corner of the display fills
repeatedly.
3. When charging is finished, disconnect the adapter
from the power outlet, and from the phone by
pressing the grey tabs on both sides of the
connector and pulling the connector out.
20
When the battery is weak and only a few minutes of
talk time remain, the battery sensor informs you in the
following ways: an empty battery icon flashes (
),
you hear a warning tone and a message is repeated at
regular intervals on the display. When the battery
becomes too weak for the phone to operate, it
switches off automatically.
21
Getting Started
Getting Started
Switching the Phone On/Off
1. Open the phone.
2. Hold down
until the phone switches on.
3. If the phone asks for a password, key in the
password and press the OK soft key. The
password is factory set to 0000. For further
details, see page 129.
Note: The display language is determined by the SIM
card inserted. To change the language, use the
Language menu option; for further details, refer
to page 81.
5. When you wish to switch the phone off, hold
down
until the power-off animation is displayed.
Using the Ear-Microphone
4. If the phone asks for a PIN, key in the PIN and
press the OK soft key. For further details, see
page 130.
When the phone has registered with an approved
network provider, the idle screen, illustrated
below, is displayed on the main and external
displays.
<Service Provider>
Wed 14 Aug
10:29
10:29
14/08
External display
Menu
PhoneBook
With the ear-microphone supplied with your phone, you
can make or answer a call without holding the phone.
When you connect the ear-microphone to the jack
above the volume keys, the button on the earmicrophone will operate as listed below.
To...
Then press the button...
Redial the last call
Twice in idle mode.
Answer a call
When you receive the call.
End a call
When you have finished the
call.
Note: You can use the voice dialling or voice command
features by pressing the button, if the Active
Folder menu option is set to Voice Dial or Voice
Command. For further details, refer to page 84.
Main display
22
23
Call Functions
Call Functions
Making a Call
When the idle screen is displayed, key in the area
code and phone number and press
.
Note: If you have set the Auto Redial option to ON
(see page 83) and the person called does not
answer or the line is busy, the number is
redialled automatically up to ten times.
Making an International Call
1. Press and hold down
for the international
prefix. The + character appears.
2. Key in the country code, area code and phone
number and press
.
Correcting the Number
To clear...
Then...
The last digit
displayed
Press the ❙!soft key.
Any other digit
in the number
Press
until the cursor
( ❘ ) is immediately to the right
of the digit to be cleared.
Press the ❙!soft key.
You can also insert a missing
digit simply by pressing the
appropriate key.
The whole display
24
Hold down the ❙!soft key for
more than one second.
Ending a Call
When you have finished your call, briefly press
.
Making a Call from the Phonebook
You can store the names and phone numbers called
regularly in the SIM card and phone memories,
which are jointly called the phonebook. You then do
not need to remember all your numbers; simply
select the required name to recall the associated
number. For further details on the Phonebook feature,
refer to page 37.
Voice Dialling
If you have set the Active Folder option to Voice
Dial (see page 84), your phone also allows you to
say a name when you open the phone. It then
automatically dials the number stored with that
name. For further details on the Voice Dialling
feature, refer to page 69.
Redialling the Last Number
The phone stores the last 15 numbers dialled,
received or missed. To recall any of these numbers,
proceed as follows.
1. If there are any characters on the display,
press
to return to the idle mode.
25
Call Functions
Call Functions
Answering a Call
2. Access the list of numbers by pressing
.
3. Use
or
to scroll through the list of
numbers until the required number is highlighted.
4. To dial the number, press
.
1. To answer a call, open the phone. If the phone is
already open, press
or the Accept soft key.
Adjusting the Volume
During a call, if you wish to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
Press
to increase and
When somebody calls you, the phone rings and the
icon indicating the call is animated in the middle of
the screen. If the caller can be identified, the caller’s
phone number or name, if stored in your phonebook,
is displayed.
to decrease the volume.
If the Any-key Answer menu option is set to ON,
you can press any key to answer a call, except
for
and the Reject soft key (see page 82).
Note: To reject an incoming call, press the Reject
soft key or
. When the phone is closed,
hold down the volume key on the left side of
the phone.
2. End the call by closing the phone or pressing
.
Note: You can answer a call while using the
phonebook or menu features.
In idle mode with the phone open, you can adjust the
key volume using the same keys.
26
27
Call Functions
Call Functions
Viewing Missed Calls
Editing a Missed Call Number
If you have a subscription that includes the Caller Line
Identification (CLI) feature and you are unable to
answer a call for any reason, you can find out who was
calling you and then call the person back, if necessary.
2. Press the Select soft key.
The number of missed calls is displayed on the idle
screen immediately after a call was missed.
3. Change the number as required. Press
to move back through the number.
To view the missed call immediately, proceed as
follows.
4. To...
1. Press the Options soft key.
or
Then press...
Call the number
.
1. If the phone is closed, open it.
The Save soft key and enter
the name and location
required (for further details,
refer to page 37).
Store the number
2. Press the View soft key.
The number corresponding to the most recent
missed call is displayed, if available.
3. To...
Then press...
Scroll through the
missed calls
Call the number displayed
Edit or delete a missed
call number
or
.
Deleting a Missed Call
1. Press the Options soft key.
2. Press
.
The Options soft key
(see the following
paragraphs).
or
to highlight the Delete option.
3. Press the Select soft key.
You can press
feature.
at any time to exit the Missed Call
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu option;
for further details, see page 57.
28
29
Call Functions
Call Functions
In-Call Options
Your phone provides a number of control functions
that you can use during a call. To access these
functions during a call, press the Options soft key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
Example: You wish to say something to another
person in the room but do not want the
calling party to hear you.
To switch the microphone off temporarily, proceed as
follows.
1. Press the Options soft key.
2. Press
or
to highlight the Mute option.
3. Press the OK soft key.
Your correspondent can no longer hear you.
To switch the microphone back on, proceed as
follows.
1. Press the Options soft key.
2. Press
option.
or
to highlight the Unmute
Searching for a Number in the Phonebook
You can search for a number in the phonebook during
a call.
1. Press the Options soft key.
2. Press
option.
or
to highlight the PhoneBook
3. Press the OK soft key.
4. Enter the first few letters of the name that you
want to find and press the Find soft key.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
5. To review the highlighted entry, press the View
soft key.
For a more detailed description of the Phonebook
feature, refer to page 37.
3. Press the OK soft key.
Your correspondent can hear you again.
30
31
Call Functions
Call Functions
Putting a Call on Hold
Answering a Second Call
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and if you have activated the Call Waiting
menu option; see page 91. You will be notified of an
incoming call by a call waiting tone.
To place a call on hold, press the Options soft key,
and select the Hold option. You can reactivate the
call whenever you want, by pressing the Retrieve
soft key.
To answer a call while you have a call in progress,
proceed as follows.
To make a call while you have a call in progress,
proceed as follows.
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
2. Press
to dial the second call.
The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the
Options soft key and selecting the Hold option.
1. Press
to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the Swap
soft key.
To end a held call, press the Options soft key and
select the End held option.
3. To end the current call, press
.
Any held calls will automatically be reconnected
to you.
2. Make the second call in the normal way.
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing
.
32
33
Call Functions
Call Functions
Making a Multiparty Call
A multiparty call is a network service that allows
up to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
Setting Up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
2. Highlight the required person, by pressing
or
, and then press
.
3. Select Private.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
4. To return to the multiparty call, press the Options
soft key and select Join.
All the multiparty call participants can now hear
each other.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
D ropping One Participant
4. To add a new person to the multiparty call, call
the person in the normal way. Then press the
Options soft key and select the Join option.
1. Press the Options soft key and choose the
Select One option.
The list of call participants appears.
You can add incoming callers by answering the call,
pressing Options and selecting the Join option.
Repeat as required.
2. Highlight the required person, by pressing
or
, followed by
.
3. Select Remove.
Having a Private Conversation With One
P a rticipant
1. Press the Options soft key and choose the
Select One option.
The list of call participants appears.
34
The call is ended with that participant, but you
can continue to talk with the other participants.
4. End the multiparty call by closing the phone or
pressing
.
35
Call Functions
Phonebook
Muting/Sending Key Tones
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your phone
does not transmit the key tones.
Note: To communicate with answering machines or
computerised telephony systems, the Send
keys option must be selected.
Using the SMS Service
If you receive an SMS (Short Message Service)
message during a call, the message icon (
)
flashes in the display.
Either during your call or after you have finished it,
you can read the message or send a reply; refer to
page 60 for further details.
You can store phone numbers and the corresponding
names in the memory of your SIM card. In addition,
you can store up to 500 numbers and names in the
phone memory. The SIM card and phone memories,
although physically separate, are used as if they were
a single entity, called the phonebook.
Note: If you change phones, any numbers stored in
your SIM card are automatically available with
the new phone, whereas any numbers stored
in the phone must be stored again.
Storing a Phone Number with a Name
As soon as you start to enter a number, Save appears
above the left soft key to allow you to store the
number in the phonebook.
1. Key in the number to be stored.
Notes:
• If you make a mistake while entering a number,
correct it using the ❙ soft key. For further
details, refer to page 24.
• To insert a dialling pause for special phone
services, such as banking by phone, hold
down
. “P” is displayed to indicate the pause.
2. When you are sure that the number is correct,
press the Save soft key.
3. Enter the associated name.
The maximum length of a name depends on your
SIM card. For information on how to enter
characters, see page 44.
4. When you are satisfied, press the Save soft key.
The phone now displays the first free location in
the SIM card for you to save the number and
name.
36
37
Phonebook
Phonebook
If the card memory is full, the first free location in
the phone memory is displayed.
5. Press the right soft key to toggle between the phone
(To Phone) and card (To Card) memories.
6. If you do not want to save the number and name in
the suggested location, press
to clear the
location number and enter your preferred location by
pressing the number keys.
7. Press the OK soft key to store the name and number.
8. You can access the phonebook options by pressing
the Options soft key, or scroll through the memory
with
or
.
To exit, press
.
Using the Phonebook Options
When storing or viewing a number in the phonebook,
Options appears above the left soft key to allow you to
access the phonebook options, described in the
following paragraphs.
The following options are available.
Voice Record
Note: This option appears only when no name has
been recorded.
This option allows you to add a voice tag to the
number.
Follow the instructions given by your phone to record
the required name.
Play Voice
Note: This option appears only when you have
already recorded some names.
This option plays back the names that you have
recorded.
Voice Delete
Note: This option appears only when you have
already recorded some names.
This option allows you to delete a specific voice
entry.
Accessing the Options
You are asked to confirm the deletion by pressing the
OK soft key.
To access the various phonebook options, proceed as
follows.
Paste
1. Press the Options soft key.
The first available option is highlighted.
2. Scroll to the required option by pressing
or
.
3. Press the Select soft key.
38
This option allows you to paste the phonebook
number into the normal dialling mode. Use this
option to dial a number similar to one in the
phonebook (a different extension in the same office,
for example).
Use the ❙!soft key to change the number as
required; refer to page 24 for further details. When
you are ready to dial, press
.
39
Phonebook
PPhhoonneebBooookk
Edit
Colour
This option allows you to edit a number and name
stored in the phonebook.
This option allows you to assign a specific service light
colour to a number and thus distinguish the caller by
the service light colour.
Four colours are available (normal, orange, violet and
blue) and they can be assigned to up to twenty numbers.
If no specific colour is assigned, the service light
flashes with the colour you set in the Service Colour
option; see page 99.
Erase
This option allows you to erase a number and name
stored in the phonebook. You are asked to confirm
that you wish to erase the name and number from
the phonebook by pressing the Yes soft key.
Copy
This option allows you to copy a phonebook number
to another location. Use this option to store a
number similar to one already in memory; once
copied, edit the number and store it into another
location on the SIM card or in the phone memory.
Memory Status
This option allows you to check how many names
and phone numbers are stored and how many
locations are still free in the card and phone
memories.
Alert
This option allows you to assign specific ring tones
to up to twenty numbers and thus distinguish the
caller by the ring tone.
Speed-Dialling by SIM Memory Location
Once you have stored phone numbers in the SIM card,
you can dial them easily whenever required.
To speed-dial a number, proceed as follows.
To speed-dial a
Then...
number in locations...
2 to 9
Press and hold down the
appropriate key.
10 and above
Press the appropriate keys,
followed by
.
When the display shows the
name, phone number and
location, press the Dial soft
key.
Note: Memory location 1 is reserved for your Voice
Mail server number.
40
41
Phonebook
Phonebook
Searching for and Dialling a Number in
the Phonebook
Dialling a Number Using the Service
Directory or Information Numbers
1. When the idle screen is displayed, press the
PhoneBook soft key.
Note: The Service Dir. and Information Numbers
options may not be available, depending on
your SIM card.
2. If your SIM card provides Service Dialling Number
(SDN) and Information Number services, press the
O K soft key when the Find Entry option is
highlighted.
3. Enter the start of the name that you wish to find
and press the Find soft key.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find soft
key directly.
The phonebook entries are listed, starting with the
first entry matching your input. This entry is also
highlighted.
4. To...
When the idle screen is displayed, press the
PhoneBook soft key, then you can select one of the
services.
Service Dir.: enables you to view the Service
Directory and make calls from it.
Information Numbers: enables you to see the
Information Numbers in a tree structure and make
a call.
Then press...
View the
highlighted entry
The View soft key.
Select a
different entry
or
one or
more times until the required
entry is highlighted.
Look for a name
starting with a
different letter
The key labelled with the
required letter.
5. Once you have found the required entry, press
to dial the number.
42
43
Entering Text
Entering Text
Changing the Text Input Mode
When storing a name in the phonebook, creating your
personal greeting or scheduling events in your calendar,
you will need to enter text.
When you are in a field that allows characters to be
entered, you will see the text input mode indicator at
the bottom of the display.
You are provided with the following text input modes.
T9 Mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter – when you press
once, J, K or L
may be displayed. The T9 mode automatically compares
your keystrokes with an internal linguistic dictionary to
determine the correct word, thus requiring far fewer
keystrokes than the traditional ABC mode.
ABC Mode
This mode allows you to enter letters by pressing the
key labelled with the required letter once, twice, three
or four times until the letter is displayed.
Number Mode
This mode allows you to enter numbers.
To change to another text input mode, proceed as
follows.
1. Press the right soft key, indicating the current text
input mode.
2. Scroll to the required mode, by pressing
or
.
Note: If you want to exit the menu without
changing the mode, press the
soft key.
3. Press the Select soft key to select the highlighted
text input mode.
The selected text input mode is indicated on the
bottom line of the display.
Symbolic Mode
This mode allows you to enter special characters.
is a registered trademark of Tegic Communications, Inc. and
is licensed under U.S. Patent 5,818,437/5,953,541/
6,011,554.
44
45
Entering Text
Using the T9 Mode
To type a word, proceed as follows.
1. Start entering the word by pressing keys
to
. Press each key only once for each letter.
Example: To enter Hello in the T9 mode, press
,
,
,
and
.
The word you are typing appears in the display. It
may change with each key that you press.
2. Enter the whole word before editing or deleting
any keystrokes.
3. If the word is correct, start entering the next word.
Otherwise, press
repeatedly to display other
word choices for the keys that you have pressed.
Example: Both “of” and “me” have the sequence
and
. The phone displays the
most commonly used choice first.
4. Complete each word with a space by pressing
.
To type words not found in the T9 mode, change the
text input mode to the ABC mode.
Entering Text
Smart Punctuation
To enter periods, hyphens or apostrophes, press
.
The T9 mode applies rules of grammar to insert the
correct punctuation.
Example: The
key is used twice to display two
punctuation marks.
l
e
t
‘
s
e
a
t
.
Changing the Case
To change the case of the next letter(s) that you type,
press
. There are three case states:
• Lower Case
• Initial Capitals
• Capital Lock
Scrolling
• To move the cursor to the left or right within the
text, press
or
.
• To scroll through other word choices for the keys
you have entered, press
.
Clearing Letters and Words
To clear letters to the left of the cursor, press
one or more times. To erase entire words, hold
down
.
46
47
Entering Text
Entering Text
Using the ABC Mode
When typing in the ABC mode, press the key labelled
with the required letter:
• Once for the first letter
• Twice for the second letter
• And so on
Example: To display the letter “C”, quickly press
three times. To display the letter “K”,
press
twice. This method is called
Multi-tap typing.
The cursor moves to the right when you press a
different key. When entering the same letter twice or
a different letter on the same key, just wait a few
seconds for the cursor to move right automatically,
and then enter the next letter.
Changing the Case
Refer to the table below for more information on the
characters available.
To change the case of the next letter(s) that you type,
press
. There are three case states:
• Lower Case
• Initial Capitals
• Capital Lock
Key
Characters in the Order Displayed
Inserting a Space
Upper Case
To insert a space between each word, press
1
2
3
4
5
6
7
8
9
0
48
: ;
A B
D E
G H
J K
MN
P Q
T U
WX
0 x
1
C
F
I
L
O
R
V
Y
<
=
2
3
4
5
6
S
8
Z
>
“ /
7
9
%#
Lower Case
.
a
d
g
j
m
p
t
w
0
,
b
e
h
k
n
q
u
x
+
?
c
f
i
l
o
r
v
y
(
!
2
3
4
5
6
s
8
z
)
.
1 - ‘ @:
Scrolling
To move the cursor to the left or right within the text,
press
or
.
7
Clearing Letters and Words
9
& _ $
To clear letters to the left of the cursor, press
one or more times. To erase entire words, hold
down
.
49
Entering Text
Selecting Functions
and Options
Using the Number Mode
The Number mode enables you to enter numbers.
Press the keys corresponding to the required digits
before manually switching back to the appropriate text
input mode.
The roles of the soft keys vary according to the current
context; the label on the bottom line of the display just
above each key indicates its current role.
Using the Symbolic Mode
The Symbolic mode enables you to insert symbols in a
text message.
To...
Display more symbols
Enter a given symbol
Your phone offers a set of functions that allow
you to customise your phone. These functions are
arranged in menus and sub-menus, accessed via the
two soft keys marked and . Each menu and submenu allows you to view and alter the settings of a
particular function.
Example:
Then press ...
.
The corresponding key.
The phone automatically switches back to the text
input mode used immediately prior to selecting the
Symbolic mode.
<Service Provider>
Wed 14 Aug
10:29
Menu PhoneBook
Press the left soft key
to access the menu
functions.
50
Press the right soft
key to access the
Phonebook feature.
51
Selecting Functions and Options
Using the Menus
To view the various functions/options available and
select the one required, proceed as follows.
1. Press the appropriate soft key.
2. To...
Select the:
• Function displayed
or
• Option highlighted
Then press...
The left soft key.
View the next function
or highlight the next
option in a list
.
Move back to the
previous function
or option in a list
.
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions are
arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling with the navigation keys.
1. In idle mode, press the Menu soft key to access
the menu facility. Scroll with
or
to reach
the required main menu, such as Tones.
2. If the menu contains any sub-menus, Ring Tone
for example, find the one you want by scrolling
with
or
. Press the Select soft key to
enter the sub-menu.
If the menu you have selected contains further
options, repeat this step.
3. To...
Move back up one
level in the structure
Exit the structure
without changing
the settings
Scroll through the menus
.
In some functions, you may be asked for a password
or PIN. Enter the required code and press
.
52
Then press...
The right soft key.
or
.
Confirm the chosen setting
The Select soft key.
Return to the previous
menu level
The
Exit the menu, without
changing the settings
soft key.
.
53
Using the Menus
Using the Menus
Menu Structure
The various menus let you check or change your phone
settings. The following illustration shows the menu
structure.The numbers assigned to each menu option may
not match the menu number on the phone. It depends on
the services supported by the SIM.
Main Menu
Level 1
Level 2
3. Voice Functions
1. Voice Dial
1. Record
2. Act
3. Delete One
4. Play All
5. Delete All
1. Record
2. Act
3. Play All
4. Delete All
1. Record
2. Replay
3. Delete One
4. Delete All
1. AnswerPhone
2. Message Record
3. Message Select
2. Voice Command
Note: You can only see menu 0, if your SIM card
supports the SIM Application Toolkit. This is a
network feature. Please contact your service
provider for more information.
Main Menu
Level 1
1. Call Records
1. Missed Calls
2. Received Calls
3. Dialled Calls
4. Call Time
5. Call Cost 1
2. Messages
1. Voice Mail
2. Read Messages
3. Write Messages
4. Preset Message List
5. Setup
6. Broadcast
3. Voice Memo
4. AnswerPhone
Level 2
4. Tones
1. Last Call Time
2. Total Sent
3. Total Received
4. Reset Timers
1. Last Call Cost
2. Total Cost
3. Max Cost
4. Reset Counters
5. Set Max Cost
6. Price/Unit
5. Settings
1. Ring Tone
2. Melody Composer
3. Ring Volume
4. Alert Type
5. Keypad Tone
6. Message Tone
7. Power On/Off
8. Error Tone
9. Minute Minder
10. Connect Tone
1. Phone Settings
1. Connect to Voice Mail
2. Voice Server Number
1. Service Centre
2. Default Type
3. Default Validity
4. Reply Path
5. Delivery Report
1. Read
2. Receive
3. Channel List
4. Language
2. Network Services
7. Picture Messages
1
54
2
1. Greeting Message
2. Own Number 1
3. Language
4. Any-key Answer
5. Backlight
6. Service Light
7. Auto Redial
8. Auto Answer
9. Caller ID
10. Active Folder
11. Reset Settings
12. Active Line 1
1. Call Diverting 2
2. Call Barring 2
3. Call Waiting 2
4. Network Selection
5. Line Identification 2
6. Closed User Group
Shown only if supported by your SIM card.
May not be shown or supported by your network service provider.
55
Using the Menus
Main Menu
Level 1
Level 2
5. Settings
(continued)
3. Security Settings
1. PIN Check
2. Change PIN
3. Phone Lock
4. Change Password
5. SIM Lock
6. FDN Mode 1
7. Change PIN2 1
1. Wallpaper
2. Main Menu
3. Skin
4. LCD Brightness
5. Service Colour
6. Graphic Logo
1. Proxy Settings
2. Current Proxy
4. LCD/LED Settings
5. Browser Settings 2
6. Organiser
1. Scheduler
2. Alarm
3. Calculator
4. To Do List
5. Calendar
6. World Time
7. Clock
8. Conversion
1. Daily Alarm
2. Once Alarm
3. Weekly Alarm
4. Alarm Tone
1. Set Time
2. Set Date
1. Length
2. Weight
3. Volume
4. Area
5. Temperature
9. Timer
10. Stopwatch
7. Games
1. Bowling
2. Speed Up
3. Honey Ball
8. WWW Services 2
1. Home
2. Bookmark
3. Goto
1
2
56
Shown only if supported by your SIM card.
May not be shown or supported by your network service provider.
Call Records
Via this menu, you can view:
• Missed calls
• Received calls
• Dialled calls
The number and name (if available) are displayed
together with the date and time at which the call
was made. You can also view call times and costs.
Missed Calls
Menu 1-1
This option lets you view the last 15 unanswered
calls. You can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the call from the list
Received Calls
Menu 1-2
This option lets you view the last 15 phone calls
received. You can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the call from the list
57
Call Records
Dialled Calls
Call Records
Menu 1-3
This option lets you view the last 15 numbers dialled.
You can also:
• Edit the number and save it in the phonebook
• Redial the number
• Delete the number from the list
Call Time
Menu 1-4
Call Cost
Menu 1-5
This network feature lets you view the cost of calls.
The following options are available.
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the cost
counter was last reset. If the total cost exceeds the
maximum cost set via the Set Max Cost option, you
can no longer make any calls, except calls to the
emergency services, until you reset the counter.
This option lets you view the timers for calls made
and received. The following timers are available.
Max Cost: maximum cost set via the Set Max Cost
option (see below).
Last Call Time: length of the last call.
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see page 130)
and then press the OK soft key.
Total Sent: total length of all calls made since the
timer was last reset.
Total Received: total length of all calls received
since the timer was last reset.
You can use the Reset Timers option to reset the
call timers; you must first enter the phone password
(see page 129) and then press the OK soft key.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes, and so forth.
58
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls; you must first
enter your PIN2 (see page 130) and then press the OK
soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the cost
of your calls; you must first enter your PIN2 (see
page 130) and then press the OK soft key.
59
Messages
Messages
Your phone receives voice mail notification messages,
and Short Message Service (SMS) text messages. Voice
mail and SMS are network services. Please contact your
service provider for more information.
When the
icon appears, you have received voice
mail. When the
icon appears, you have received
new text messages. If the message memory is full, an
error message is displayed and you cannot receive any
new messages. Use the Delete option in the Read
Messages menu to delete obsolete messages. Once
there is space in the memory, any undelivered SMS
messages will be received (provided sufficient space is
available).
Note: If your SIM card supports the ALS feature and
you receive voice mail, one of the holes in the
tape symbol (
) is filled in to indicate the line
concerned.
Picture and ring tone messages can also be received.
To...
Send or receive
picture messages
Load ring
tone messages
Then use the...
Picture Messages menu
option; see page 67.
Ring Tone menu option;
see page 74.
Voice Mail
Note: If you press and hold down
when the phone
is in idle mode, you can access your voice mail
server directly, provided that the number has
already been set via the Voice Server Number
menu option.
Voice Server Number
You can change the voice mail server number.
Note: Some networks do not allow the user to change
this setting.
To...
Enter the server
number
Recall a number in
the phonebook
Correct a digit
Move the cursor to the
left/right without clearing
the digit
Then press...
The corresponding number
keys.
The PhoneBook soft key.
The ❙ soft key or
.
.
Note: See page 37 for instructions on how to use the
phonebook.
Menu 2-1
This menu provides you with a quick way of accessing
your voice mailbox (if provided by your network).
Connect to Voice Mail
Before using this feature, you must enter the voice
server number obtained from your service provider (see
the following page).
60
You can then select this option and simply press the
OK soft key to listen to your messages.
Read Messages
Menu 2-2
When the Read Messages menu is selected, the
header of the first message is displayed. This contains
the:
• Message number
• Message status (new, old, not sent, sent)
61
Messages
Messages
To view this message, press the View soft key. The
screen shows the:
• Sender’s phone number (if sent with the message)
• Date and time at which the message was
received
• Message text
To scroll through the messages, press
or
.
You can choose the following options, by pressing
the Options soft key.
Text Reply: allows you to reply by sending a text
message. You can also:
• Change the SMS centre number (if required)
• Send the message
• Save and send the message
• Save but not send the message
Call back: allows you to call the sender back.
Edit: allows you to edit a message.
Delete: allows you to delete obsolete messages.
Cut Number: allows you to extract a number from
the message text, so that you can call the number or
save it in the phonebook.
Send: allows you to send a message that you have
not already sent.
Send again: allows you to resend a message that
you have already sent.
Note: The options available vary, depending on the
message status (new, old, not sent, sent).
62
Write Messages
Menu 2-3
Via this menu, you can write and edit text messages
of up to 160 characters.
1. Key in a message. For details on how to enter
text, refer to page 44.
2. After you complete the message, you can select
the following options.
Send Only: allows you to send the message
immediately. You can enter the required
destination.
Save and Send: allows you to save a copy of the
message and then send the message to the
required destination. You can read the message
using the Read Messages option. When you
read the message, ‘Sent’ is displayed to indicate
the message state.
Save Only: allows you to save the message so
that it can be sent later. When you read the
message, ‘Not sent’ is displayed.
3. After selecting the required option, press the
Select soft key.
The display prompts you to enter the destination
number.
4. Enter the phone number and press the OK soft
key or press the PhoneBook soft key to select
the number from the phonebook.
63
Messages
Messages
Preset Message List
Menu 2-4
Using this menu, you can preset up to five messages
that you use most frequently. When you access this
menu, the preset message list is displayed. Scroll
through the list using
or
. When the
required message number appears, press the
Options soft key.
The following options are available.
Edit: allows you to write a new message or edit the
selected preset message.
Note: For further information on how to enter
characters, refer to page 44.
Send Message: allows you to recall the selected
preset message. Once you have completed the
message, you can send, save and send, or simply save
it. For details on how to send a message, see page 63.
Default Type: allows you to set the default message
type (Text, Voice, Fax, X400, Email and ERMES). The
network can convert the message into the selected
format (possibly on a subscription basis).
Default Validity: allows you to set the length of
time for which your text messages will be stored at
the message centre while attempts are made to
deliver them.
Possible values are one hour, 6 hours, 24 hours, one
week and the maximum authorised by your service
provider.
Reply Path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
Delete: allows you to delete the selected preset
message.
Delivery Report: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Setup
Broadcast
Menu 2-5
Via this menu, you can set up default SMS
information.
Service Centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
64
Menu 2-6
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately they are
received, provided that:
• The phone is in the idle mode
• The Receive option is set to Enable
• The message channel is currently active in the
channel list
65
Messages
Messages
Picture Messages
If the message is long, press the down volume key
on the left side of the phone one or more times.
The last five messages are also stored for later
retrieval. Please contact your service provider for
more information.
Menu 2-7
The phone allows you to send and receive text
messages that contain pictures. These messages are
called “picture messages”, several of which are
preset in the phone and can be replaced with new
ones received from other sources.
The following options are available.
The following options are available.
Read: allows you to view the first message. Scroll
through the message using
or
. At the end
of the message, press the Next soft key to move to
the next message.
Receive: allows you to turn the reception of
broadcast messages on or off.
Channel List: lists all available channels. The
channels currently selected are indicated by an
asterisk (*) beside the name. When you select one of
them, you can edit, enable, disable or delete the
channel.
The Enter Channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel ID obtained from your service provider, and a
title for the channel.
Write Message: allows you to write text to send
with the picture message.
Delete: deletes the picture message; Empty is
displayed instead of the title.
Send Message: allows you to enter the destination
phone number; you must then press the O K soft key
to send the picture message.
Cut Number: allows you to extract a number from
the picture message, so that you can call the number
or save it in the phonebook.
Receiving a Picture Message
To view a message immediately you receive it, press
the Vi e w soft key. Press the right soft key to toggle
between viewing the message and the image.
Language: allows you to select your preferred
language to be used when displaying cell broadcast
messages.
66
67
Messages
The following options are available.
Save: allows you to save the picture message in your
picture message list.
Discard: allows you to discard the picture message
without saving it.
Cut Number: allows you to extract a number from the
picture message, so that you can call the number or
save it in the phonebook.
Note: This function is available between phones
supporting Nokia’s* Smart Messaging services.
Each picture message is made up of several text
messages; it may, therefore, cost you more to
send one picture message than one text
message.
Picture messages are stored in the phone; you
cannot, therefore, view them if you use your SIM
card in another phone.
*
68
Nokia is a registered trademark of Nokia Corporation.
Voice Functions
In the Voice Functions menu, you can use voice
features, such as:
• Voice dial
• Voice command
• Voice memo
• AnswerPhone
Voice Dial
Menu 3-1
The voice dialling feature allows you to make phone
calls by saying a voice tag that has been added to a
name and phone number in the phonebook. Any
spoken word, such as a name, can be a voice tag.
When recording a voice dial tag, note that:
• Voice tags are not language-dependent. They are
dependent on the speaker’s voice.
• Voice tags are sensitive to background noise. Where
possible, record voice tags or make calls in a quiet
environment.
• When recording a voice tag or making a call, hold
the phone in the normal position close to your ear.
• The maximum length for a voice tag recording is
about 1.5 seconds, but very short names are not
recorded.
• You can record up to twenty voice-dial entries.
Record: allows you to record name tags and allocate
them to numbers for voice dialling.
69
Voice Functions
Voice Functions
1. Say the name you want to use for voice dialling
after you hear a voice prompt. For best results, use
names with at least two syllables, or use both a
first and last name. The phone stores the name as
the first sample, and then prompts you to say the
name again.
2. Respond to the prompt by repeating the name.
The phone stores the name as the second sample
and then requests the phone number and name.
3. To store the number, press the O K soft key. Follow
the instructions described on page 37 to store the
number in your phonebook.
Act: allows you to activate voice dialling.
You hear a voice prompt and Say Name is displayed.
Say the voice tag clearly. The phone automatically
dials the number of the recognised voice tag. If no
match is found for the voice tag or the tag is not
recognised, the phone may ask you to try again.
Note: This option is only available once you have
recorded and stored voice tags.
Delete One: allows you to delete an individual voice
tag. The corresponding phone number remains in the
phonebook but the voice tag is deleted.
If the name displayed is... Then press...
To be deleted
The OK soft key.
Not to be deleted
or
.
The next name is
displayed.
70
To exit the Delete One option, press the
soft key.
Play All: allows you to play back all recorded voice
tags.
Delete All: allows you to delete all voice tags. The
corresponding phone numbers remain in the
phonebook but the voice tags are all deleted. Press the
OK soft key when the message “Delete All Confirm?”
is displayed.
Otherwise, press the Cancel soft key to exit the
function without deleting the voice tags.
Voice Command
Menu 3-2
This menu gives you quick access to menus you use
frequently, by saying your own voice commands.
The following options are available.
Record: the most frequently used menu functions are
programmable with your own voice commands. The
menus are preset to OFF by default, indicating that
they are not recorded. When voice commands are
recorded successfully, the menus are changed to O N
in the display.
Act: allows you to access the menus using the
recorded voice commands.
Play All: plays back all voice commands you have
recorded.
Delete All: deletes all commands you have recorded.
71
Voice Functions
Voice Functions
Voice Memo
Menu 3-3
You can use the Voice Memo feature to:
• Record up to three voice memos
• Play the recorded voice memos
• Delete one or all voice memos
All memos recorded are played back, starting with
the most recent one.
Delete All: allows you to delete all memos. Press
the OK soft key when the message “Delete All
Confirm?” is displayed.
The following options are available.
Record: allows you to record a memo. The screen
displays the:
• Memo location
• Date and time when the memo was recorded
• Recording time counter
The maximum recording time is about 35 seconds.
If you want to record for longer, press the Continue
soft key. Split appears instead of Continue. You can
continue recording and the rest of the memo is
stored in the next memo location.
To stop recording, press the Stop soft key.
Note: If all memo locations are full, you must delete
an old memo before recording a new one.
Replay: allows you to play back all memos recorded,
starting with the most recent memo. The screen
displays the:
• Memo location
• Date and time when the memo was recorded
To skip to the next memo, press the Skip soft key. To
stop the playback, press the Stop soft key.
Delete One: allows you to delete a specific memo.
72
AnswerPhone
Menu 3-4
You can set your phone to answer calls with your
own recorded message.
You can use the message to inform callers of your
current situation and to guide them to leaving
messages in your voice mail.
While the message is being played, if you wish, you
can take the call by pressing the Accept soft key.
The following options are available.
AnswerPhone: To turn off the AnswerPhone, select
Disable, to turn on, select Enable.
Message Record: You can record for up to 35
seconds. To stop recording before the time is up,
press the Stop soft key. To change the message, use
the Delete option, and record a new one.
Message Select: The phone offers two default
messages, and one message of your own. You can
select User Message only when you have recorded
your own message.
73
Tones
Tones
When you receive a ring tone message, proceed as
follows.
You can use the Tones menu to customise various
sound settings, such as the:
• Ring tone, volume and type for incoming calls or
messages
• Sounds made when your call is connected, you
press a key, make a mistake or you switch your
phone on/off.
Ring Tone
Menu 4-1
This option allows you to set the ring tone for incoming
calls or messages.
Note: If your SIM card supports the ALS feature, this
option also allows you to select a different ring
tone for each line.
The following options are available.
Melody: lets you choose between many different
melodies. Each time you select a melody from the list,
the melody is played.
Bell: lets you choose between many different bells.
Each time you select a bell from the list, the bell rings.
My Music Box: lets you choose between
17 changeable ring tones; see below for further details.
• Downloading mono-poly ring tones (Download 1~3)
With this method, you can select one of three ring
tones extracted from a Nokia-compatible ring tone
message. For details about this network service,
contact your service provider.
74
1. To listen to the tone, press the Play soft key.
2. To save the ring tone, press the Save soft key.
3. Select the location in which you wish to save the
ring tone and press the O K soft key.
4. To use this tone as the current ring tone, press the
Ye s soft key. Otherwise, press the N o soft key.
• Composing ring tones (User 1~2)
With this method, you can select one of two ring
tones composed with the Melody Composer menu
option.
• Downloading 40 poly ring tones from other sources
(Empty)
With this method, you can download 12 of the ring
tones from sources, such as PCLink in the content
download kit or a WAP site.
Note: While downloading ring tones, if the battery is
detached from the phone, you may lose the
downloaded ring tones.
Melody Composer
Menu 4-2
This menu allows you to compose your own,
customised ring tone.
• Three octaves are available.
• A maximum of 100 notes can be entered.
• You can adjust the length of the notes and add
rests, as required.
Composing a Melody
You can compose two melodies.
1. When you access the menu, the names of any
melodies created are displayed. Otherwise, (Empty)
appears. Select the melody that you wish to
create or edit.
75
Tones
Tones
2. Press the Select soft key and compose your melody
using the following keys.
To...
Then press...
Enter C, the first note
in the musical scale
Enter D
Enter E
Enter F
Enter G
Enter A
Enter B
Move a note up or
down one octave
Enter a rest
Delete notes
Move a note a
semitone up or down
Add # to a note or not
Change the length
of a note
Listen to your melody
Cancel your changes
.
Deleting a Melody
.
.
.
.
.
.
.
until the rest is of the
required length.
.
or
(for example,
the note A changes to A#, B,
C, C#, and so on each time
).
you press
.
(the length changes
each time you press the key).
The Listen soft key.
.
3. When you are satisfied with your melody, press the
Yes soft key.
4. Enter a title for the melody.
76
5. To use the melody as the ring tone, press the Yes
soft key.
The melody is saved and is played each time your
phone rings.
1. Select the melody that you wish to delete.
2. Hold down
for a few seconds.
All notes are erased.
3. Press the Listen soft key. You are asked to
confirm that you wish to delete the melody by
pressing the Ye s soft key.
Ring Volume
Menu 4-3
This option allows you to adjust the ring volume to
one of five levels. Use the volume keys on the left
side of the phone or
. The more bars you see,
the greater the volume.
Alert Type
Menu 4-4
This option allows you to indicate how you are to be
informed of any incoming calls. The following options
are available.
Light Only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the tone selected via
the Ring Tone menu option.
Vibration: the phone vibrates but does not ring.
Note: For further details on how to enter characters,
refer to page 44.
Vibra+Melody: the phone first vibrates three times
and then starts ringing.
You are asked if the melody is to become the ring tone.
Note: To toggle between the current alert type and
the Silent mode, hold down
.
77
Tones
Keypad Tone
Tones
Menu 4-5
This option allows you to select the tone that the
keypad generates when you press a key. The following
options are available.
OFF: the keys do not generate any sound.
The following options are available.
OFF: when you switch the phone on and off, you do not
hear a jingle.
Classical: when you switch the phone on and off, you
hear the default jingle.
Cool: each key from
, when pressed,
to
generates a pure sound only in the idle mode.
Cheerful: when you switch the phone on and off, you
hear a cheerful jingle.
Piano: each key from
, when pressed,
to
generates a different note in the musical scale only in
the idle mode.
Error Tone
Tone: each key, when pressed, generates a different
sound.
This option allows you to select how the phone informs
you that you have made a mistake. The following
options are available.
Beep: each key, when pressed, generates the same
sound.
Message Tone
OFF: the phone does not beep.
ON: the phone beeps to indicate an invalid entry.
Menu 4-6
Minute Minder
This option allows you to indicate how you are to be
informed that you have received a new message. The
following options are available.
Single Beep: the phone beeps once.
SMS Tone1 ~ SMS Tone5: the phone rings using the
selected SMS tone.
Light Only: the service light on the top of the phone
flashes.
Vibration: the phone vibrates but does not ring.
Power On/Off
Menu 4-7
This option allows you to select the tone that you will
hear when you switch your phone on or off.
78
Menu 4-8
Menu 4-9
This option allows you to specify whether the phone
must beep every minute during an outgoing call to keep
you informed of the length of your call. The following
options are available.
OFF: the phone does not beep.
ON: the phone beeps every minute.
Connect Tone
Menu 4-10
This option allows you to specify whether the phone
should beep when the phone connects to the network.
The following options are available.
OFF: the phone does not beep.
ON: the phone beeps when your call is accepted.
79
Settings
Settings
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Settings menu.
Phone Settings
Menu 5-1
Greeting Message
Own Number
Note: The contents of this menu may vary, depending
on the SIM card.
You can enter your own name and number using this
menu. If you have subscribed to the Alternate Line
Service (ALS), you can select a line with
or
.
The following options are available.
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
When you select this option, the current message is
displayed.
Erase: allows you to erase the name and number.
Edit: allows you to edit the name and number. If your
SIM card supports the ALS service, only the Edit soft
key is displayed. Press the Edit soft key and enter or
edit your own name for the ALS line.
To...
Then press...
Clear the existing message
and hold it
down until the message
is cleared.
Language
The appropriate
alphanumeric keys.
You can select a different language for the display
and voice functions.
Enter a new message
Cancel your input and
return to the previous menu
.
You can also set the default text input mode. For
details on the text input modes, refer to page 44.
For more information on entering characters, refer to
page 44.
80
81
Settings
Settings
Any-key Answer
Service Light
Depending on the setting of the Any-key Answer
option, you can answer an incoming call by pressing
any key, except
and the Reject soft key.
This option allows you to select whether the service
light on the top of the phone is used or not. The
following options are available.
To reject a call when
the phone is...
Then press the...
ON: the service light flashes when the phone is
ready for use.
Open
Reject soft key or
Closed
Volume keys on the left side
of the phone.
.
Note: Hold this key down if
the Any-key Answer
option is set to OFF.
ON: you can press any key, except
Reject soft key.
OFF: you can only press
and the
OFF: the service light is not used.
Auto Redial
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies.
or the Accept soft key.
The following options are available.
Backlight
ON: the number is redialled automatically.
You can specify whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off. The
following options are available.
OFF: the number is not redialled.
Short: the backlight comes on when you press a key
or receive a call and switches off 10 seconds after the
last key is pressed.
With the Auto Answer function, the phone automatically answers calls after 3, 5 or 10 seconds. You
can also turn this feature off.
Long: the backlight comes on when you press a key or
receive a call and switches off 20 seconds after the
last key is pressed.
Note: This feature is only available when the phone
is connected to a car kit (optional).
Auto Answer
OFF: the backlight is not used.
82
83
Settings
Settings
Caller ID
Reset Settings
You can prevent your phone number from being
displayed on the phone of the person being called.
You can easily reset your phone to its default
configuration. Before proceeding, you must enter the
phone’s 4-digit password.
Note: Some networks do not allow the user to
change this setting.
The following options are available.
Note: The password is preset to 0000. To change this
password, refer to page 97.
Default: the default setting provided by the network
is used.
Active Line
Hide Number: your number is not displayed on the
other person’s phone.
Some SIM cards may be used with two subscriber
numbers (network service). This function is only
available if your SIM card supports it.
Send Number: your number is sent each time you
make a call.
Active Folder
The voice dial and voice command modes can be
activated automatically whenever the phone is
opened. The following options are available.
OFF: the voice dial and voice command modes must
be activated manually via the Voice Dial and Voice
Command menu options; for further information,
refer to pages 69 and 71 respectively.
This option allows you to select the line to be used
to make calls. However, calls can be answered on
both lines, regardless of the selected line. When you
select a line, the line number appears as an indicator
after the operator/service provider’s name.
When you select the Manual option, you can choose
a line whenever you use the call barring, call
diverting or call waiting functions; in this case, there
is no indicator to show which line is active.
Voice Dial: the voice dial mode is activated when
you open the phone.
Voice Command: the voice command mode is
activated when you open the phone.
Note: When you use the ear-microphone and the
Active Folder menu option is set to Voice Dial
or Voice Command, you can use the corresponding function by pressing the button on the
ear-microphone.
84
85
Settings
Network Services
Settings
Menu 5-2
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
Call Diverting
Note: The call divert options may be different,
depending on your SIM card and those not
supported by your network operator may not
be shown.
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
You can specify individual diverting options for each of
the following call types:
• Voice calls only
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in use)
Example: You can:
• Systematically divert fax calls to your
office fax machine
• Divert voice calls to your colleague if you
are already using the phone
To set your call diverting options, proceed as follows.
1. Select the type of call diverting required by
pressing
or
until the appropriate option
is highlighted, and then press the Select soft key.
Call diverting can be set up in the following ways.
2. Select the type of calls to be diverted by
pressing
or
until the appropriate option
is highlighted and then press the Select soft key.
Divert Always: all calls are diverted.
3. Press the Activate soft key to confirm your settings.
Busy: calls are diverted if your phone is engaged on
another call.
4. Enter the number to which the calls are to be
diverted.
No Reply: calls are diverted if you do not answer
the phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
Cancel All: all call diverting options are cancelled.
86
To enter an international code, hold down
until the + sign is displayed. You can also select a
number in the phonebook or the voice server
number, by pressing the Options soft key, followed
by PhoneBook or Voice Server Number.
5. When you are satisfied, press
or the OK soft
key. The phone sends your settings to the network
and the network’s acknowledgement is displayed.
87
Settings
Settings
Call Barring
To deactivate specific call diverting settings, proceed
as follows.
1. Select the call diverting option to be deactivated.
2. Select the type of calls to which this option
applies.
3. Press the Remove soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call diverting settings by
selecting the Cancel All option.
The call barring network service allows you to restrict
your calls.
Call barring can be set up in the following ways.
All outgoing: calls cannot be made.
International: international calls cannot be made.
International except to home: when abroad, calls
can be made only to numbers within the current
country and to your home country, that is the country
where your home network provider is located.
All Incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
You can specify individual call barring options for
each of the following call types:
• Voice calls only
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in use)
To set your call barring options, proceed as follows.
1. Select the type of call barring required by pressing
or
until the appropriate option is
highlighted and then press the Select soft key.
2. Select the type of calls to be barred by
pressing
or
until the appropriate option
is highlighted and then press the Select soft key.
3. Press the Activate soft key to confirm your
settings.
88
89
Settings
Settings
Call Waiting
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
This network service enables you to be informed
when someone is trying to reach you during another
call.
1. Select the call barring option to be deactivated.
You can specify individual call waiting options for
each of the following call types:
• Voice calls only
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in use)
2. Select the type of calls to which this option applies.
To set your call waiting options, proceed as follows.
3. Press the Remove soft key.
1. Select the type of calls to which the call waiting
option is to be applied by pressing
or
until the appropriate option is highlighted and then
press the Select soft key.
To deactivate specific call barring settings, proceed as
follows.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and change
the call barring password obtained from your service
provider using this option. You must enter the current
password before you can specify a new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
2. Press the Activate soft key to confirm your
settings.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call waiting settings, proceed
as follows.
1. Select the type of calls to which the option applies.
2. Press the Deactivate soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
90
91
Settings
Settings
Network Selection
Line Identification
The Network Selection feature enables you to control
whether the network used when roaming (outside
your home area) is selected automatically or manually.
This option allows you to view the following line
identification settings.
Note: You can select a network other than your home
network only if it has a valid roaming
agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed as
follows.
1. When the Network Selection menu is displayed,
press the Select soft key.
2. Press
or
until the appropriate option is
highlighted and press the OK soft key.
CLIP (Calling Line Identification Presentation) /
COLP (Connected Line Identification Presentation)
If these network functions are active, the caller’s
number is displayed during a call. If the phone
number matches one stored in the phonebook, the
caller’s name is also displayed.
CLIR (Calling Line Identification Restriction) /
COLR (Connected Line Identification Restriction)
If these network functions are active, your phone
number is not displayed on the called person’s phone.
If you select Automatic, you are connected to the
first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press
or
until the preferred network is
highlighted and press the OK soft key.
You are connected to that network when roaming.
92
93
Settings
Settings
Closed User Group (CUG)
This network service allows incoming and outgoing calls
to be restricted to a selected user group. You may be a
member of up to 10 user groups.
For details on how to create, activate and use a closed
user group, contact your service provider.
Example: A company lends SIM cards to its employees
and wants to restrict outgoing calls to members
of the same team.
When you select the Closed User Group option, you
are asked if you want to activate the CUG function.
Press the Yes soft key to confirm. You can now access
the following options.
Deactivate: deactivates the CUG function.
Outside Access: enables you to allow or prohibit
calls to numbers other than those nominated for the
closed user group. This feature depends on the
nature of your CUG subscription. Please check with
your service provider.
Default Group: you may communicate a default
CUG to your service provider. If you have done so,
you can enable the Default Group option on your
phone. When making a call, you will be given the
option of using your default CUG, instead of
selecting one from the list.
Security Settings
Menu 5-3
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears. Add
a new CUG index (as advised by your service provider)
or delete a selected group.
The security settings enable you to restrict the use of
your phone to:
• The people of your choice
• The types of calls of your choice
To...
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (also see page 129).
Scroll through the
existing CUG indexes
Then press...
or
.
Add a new CUG index
The Options soft key, select
Add and enter the index.
Delete a CUG index
or
to select the
index you want to delete, press
the Options soft key and
select Delete.
94
PIN Check
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
95
Settings
Note: Before disabling the PIN Check feature, you must
enter your PIN.
The following options are available.
Enable: you must enter the PIN each time the phone is
switched on.
Settings
Change Password
The Change Password feature allows you to change your
current phone password to a new one. You must enter
the current password before you can specify a new one.
Disable: the phone connects directly to the network
when you switch it on.
The password is factory set to 0000. Once you have
entered a new password, you are asked to confirm it by
entering it again.
To change your PIN, refer to the Change PIN menu
option below.
SIM Lock
Change PIN
When the SIM Lock feature is enabled, your phone only
works with the current SIM. You must enter the SIM lock
code.
This feature allows you to change your current PIN to a
new one, provided that the PIN Check feature is
enabled. You must enter the current PIN before you can
specify a new one. Once you have entered a new PIN,
you are asked to confirm it by entering it again.
Once you have entered the lock code, you are asked to
confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock code.
Phone Lock
FDN Mode
When the Phone Lock feature is enabled, the phone is
locked and you must enter the 4-digit phone password
each time the phone is switched on.
The FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The password is factory set to 0000. To change the
phone password, refer to the Change Password menu
option on page 97.
Once the correct password has been entered, you can
use the phone until you switch it off.
The following options are available.
Enable: you can only call phone numbers stored in the
phonebook. You must enter your PIN2.
Disable: you can phone any number.
The following options are available.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Enable: you are required to enter the phone password
when you switch the phone on.
To change your PIN2, refer to the Change PIN2 menu
option on page 98.
Disable: you are not asked to enter the phone
password when you switch the phone on.
96
97
Settings
Settings
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
Note: This feature is only available if you have selected
the My Image menu option.
Main Menu
This option allows you to select the type of animation
for the menus: Classical or Cute.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Skin
LCD/LED Settings
LCD Brightness
Menu 5-4
Wallpaper
This option allows you to select the background image
to be displayed on your phone.
Image: allows you to select one of the five predefined
images or the calendar. When the calendar is displayed
in idle mode, you can scroll through the months by
pressing
or
.
My Image: allows you to select one of the images
downloaded from the content CD or a WAP site.
To preview an image, press the P review soft key. To
return to the image list, press the
soft key.
If you select the Animation option, the downloaded
images are displayed in sequence.
My Image Settings: allows you to set the text colour,
background colour, text position and display time by
selecting the appropriate sub-options.
98
This option allows you to select one of three menu
patterns.
This option allows you to adjust the brightness of the
displays. Press
to increase or decrease the
brightness.
Service Colour
There are six colours available for the service light:
green, yellow, orange, violet, blue and sky blue.
You can scroll through these colours, by pressing
or
. Press the Select soft key to select the
required colour.
Graphic Logo
This option allows you to display your operator’s logo
instead of its name.
O N: the operator logo stored in your phone is displayed
in idle mode; if no logo has been stored, the operator
name is displayed.
OFF: the operator name is displayed in idle mode.
99
Settings
Browser Settings
Menu 5-5
Note: This menu may not be shown, depending on
your network service provider.
Organiser
P roxy Name: name of the proxy server.
The Organiser feature enables you to:
• Write your schedule or to do list
• Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for example)
• Use your phone as a calculator
• View the calendar
• Find out what time it is in various cities around
the world
• Set the current date and time
• Use your phone as a unit converter, timer or
stopwatch
WDP Address: IP address required to connect to the
Internet.
Scheduler
You can set up several proxies, using the P ro x y
Settings menu option, and you can designate one as
the current proxy, using the Current Pro x y menu
option. The following parameters must be set for each
proxy; they may vary depending on your service
provider. Contact your service provider for further
details.
P o rt Number: number of the port used to connect the
gateway.
Home URL: URL address of your home web site.
Access Point
Menu 6-1
The Scheduler helps you to keep track of reminders,
calls that you need to make, meetings and birthdays.
The phone alarm rings when the date set for a
birthday, reminder or call is reached.
When you access the Scheduler menu, the
following options are available.
NAS Phone Number: PPP server phone number.
Go to date: allows you to enter a particular date and
schedule an event on that date.
Login Name: PPP server login ID (may be optional).
View All: shows the events scheduled.
Password: PPP server password (may be optional).
Delete All: deletes all the scheduled events.
Network Type: V.32 Transparent, V.32 Non-Transparent,
V.110 Transparent or V.110 Non-Transparent.
100
101
Organiser
To schedule a new event, proceed as follows.
1. When the calendar is displayed, select the month
by pressing the volume keys on the left side of the
phone, select the week by pressing
or
,
and select the day by pressing
or
. You
can also use the Go to date menu option to
specify the date.
Notes:
• You can also use
or
to select the week,
and
or
to select the day.
• To exit the Calendar screen, press
. The
phone returns to the previous menu level.
2. Press the O K soft key.
3. Select a schedule type. Four types are available.
Reminder: requires a description and the time.
Call: requires a phone number and the time.
Meeting: requires a description and the time.
B i rthday: requires a name and the time.
4. Enter the appropriate information, referring to
page 44 for further details on how to enter text if
necessary.
5. If you wish to set the alarm to ring on the
scheduled date and time, select Yes. Otherwise,
select N o.
6. If you selected Ye s, set the time for the alarm and
press O K.
Organiser
A date that has a schedule already associated with it
is underlined. If you select such a date, the contents
are displayed.
Note: If you have scheduled more than one event on
a given day, you can scroll to the required
event by pressing
or
.
The following options are available.
Add: allows you to add new contents.
Delete: deletes the scheduled event.
Move: moves the scheduled event to a new date.
Copy: copies the scheduled event to a new date.
Delete Day: deletes all events scheduled on that
date.
Alarm
Menu 6-2
This option allows you to set the alarm to ring at a
specific time when your phone is switched on. You
can set one or more alarms.
The following alarms are available.
Daily Alarm: the alarm rings every day at the same
time.
Once Alarm: the alarm rings only once and is then
deactivated.
Weekly Alarm: the alarm rings every week on the
same day and at the same time.
The Alarm Tone option allows you to select a
specific tone for the alarm.
102
103
Organiser
Organiser
Calculator
To set the alarm, proceed as follows.
1. Select an alarm type by pressing the Select soft
key.
The Set Alarm option allows you to set the alarm
time or days of the week.
Menu 6-3
You can use the phone as a 9-digit calculator. The
calculator provides the basic arithmetic functions:
addition, subtraction, multiplication, division,
percentages.
To use the calculator, proceed as follows.
1. Enter the first figure using the number keys.
2. If you have chosen Weekly Alarm, select the
required day of the week and press
.
The * symbol appears to indicate that the day is
selected.
To remove it, press
.
You can set more than one day.
3. Enter the second figure.
3. Press the OK soft key.
4. Repeat Steps 2 and 3 if necessary.
4. Enter the required time, then press the OK soft key.
5. To calculate the result to two decimal places, press
the Equal soft key or
.
Alarm Activated is displayed.
Once an alarm has been set, you can see the alarm
icon ( ) in the top line of the display. To stop the
alarm when it rings, open the phone or press any
key.
2. Press the Operator soft key until you find the
appropriate arithmetic symbol: + (add), - (subtract),
x (multiply), / (divide).
To erase any mistakes or clear the display, press
To enter a decimal point, press
.
.
To deactivate the alarm, select the Remove Alarm
option.
Note: If your phone is switched off, the alarm will not
ring.
104
105
Organiser
Organiser
To Do List
Examples:
Expression
Key Sequence
Result
12*3+5=
12x3+5
(or
)
41
34+57=
34+57
(or
)
91
45+57=
45+57
(or
)
102
48-23=
48-23
(or
)
25
14-23=
14-23
(or
)
-9
68*25=
68x25
(or
)
1700
68*40=
68x40
(or
)
2720
35/14=
35/14
(or
)
2.5
98/14=
98/14
(or
)
7
10% of 200
200x10
10=? % of 100
20
10/100
10
10% premium of 200 200+10
220
10% discount of 200 200-10
180
Square of 4
4x
(or
)
16
Reciprocal of 8
8/
(or
)
0.12
Note: When you have finished with the calculator,
press
to return to the previous menu level.
Menu 6-4
This feature allows you to:
• Draw up a list of tasks to be done
• Assign a priority and deadline to each task
• Sort the tasks by priority and status mark
Creating the To Do List
1. Press the N e w soft key.
2. Enter the task.
For further information on how to enter text, see
page 44.
3. Press the O K soft key.
4. Select high or low priority using
the Select soft key.
or
, and
5. Enter your deadline.
6. Press the Ye s soft key.
Editing the To Do List
If tasks are already defined in the to do list when you
select the To Do List menu option, the current
contents are displayed with the associated status
mark and priority.
To view the detailed contents of a task, press the
Vi e w soft key. To change the status of a task,
press
.
106
107
Organiser
Organiser
World Time
You can choose the following options, by pressing
the Options soft key.
N e w: allows you to create a new task.
Mark: allows you to mark a task as completed.
Edit: allows you to edit an existing task.
Sort: allows you to sort the tasks by priority (high,
low) or by status.
Copy: allows you to copy a task.
1. Select the city corresponding to your time zone by
pressing
one or more times.
Delete All: allows you to delete all tasks.
The local date and time are displayed.
Calendar
Menu 6-5
You can view calendars for 1900 through to 2099.
Then press...
Previous day
or
.
Next day
or
.
Previous week
or
.
Next week
or
.
Next or previous month
The volume key on the
left side of the phone.
You can also change dates by pressing the Goto soft
key.
108
You can use your phone to check the current time in
21 major cities around the world. Scroll through the
cities using
.
The screen shows the:
• City name
• Current date and time
• Time difference between the selected city and your
city if you have set the local time (see below for
further details) or GMT (by default)
To select the time zone in which you are located,
proceed as follows.
Delete: allows you to delete a task.
To move to the...
Menu 6-6
2. Press the Set soft key.
3. To...
Then press the...
Update the current
date/time with this
new setting
Set Local soft key.
Indicate that the
time zone is currently
using the daylight
saving time
Set DST soft key.
A check mark is shown
next to the time
difference.
Indicate that the
time zone is no longer
using the daylight
saving time
Remove DST soft key
(only available when the
check mark is shown
next to the time
difference).
109
Organiser
Clock
Organiser
Menu 6-7
Conversion
Menu 6-8
This option allows you to change the current time
and date.
This option allows you to convert from one type of
unit to another.
The following options are available.
To convert a value, proceed as follows.
Set Time: allows you to change the time displayed,
1. Select the type of conversion to be performed from
Length, Weight, Volume, A re a and
Temperature, and press the Select soft key.
using the 24-hour system.
Note: Before setting the time, you must specify your
time zone, via the World Time menu option.
Set Date: allows you to change the date displayed.
Enter the day, month and year.
2. Enter the value to be converted and press
move to the F ro m field.
to
3. Select the original unit by pressing
or
and
press
to move to the To field. Refer to the
table on the following page for the units available.
4. Select the required unit by pressing
or
.
5. Press the Select soft key or
to view the
result.
The result appears in the Answer box.
110
111
Organiser
Organiser
Timer
Units Available
Menu 6-9
Using the Timer feature, you can set the phone to
sound an alarm after a certain time.
Type
Units
Length
mm
km
yard
cm
in
mile
m
ft
Weight
g
grain
kg
oz
ton
pound
Volume
cm3
in3
gal
m3
ft3
l
yd3
Area
cm2
in2
Acre
m2
ft2
a
yd2
°C
°F
1. Press the Set soft key.
Temperature
112
2. Enter the length of time you wish to count down in
hours and minutes and press the OK soft key.
3. Press the Start soft key to start counting down.
Even if you exit the Timer screen, the timer will
continue running. After the specified time has expired,
the phone informs you by playing a melody and
displaying a text notification. To stop the timer melody
when it rings, open the phone or press any key.
To stop the timer before the end, press the Stop soft
key on the Timer screen.
Note: The timer uses power from the battery;
consequently, the phone’s operating time will
be reduced.
113
Organiser
Stopwatch
Menu 6-10
The stopwatch can be used to measure times for
various sports.
Example: Running or swimming races.
Up to four stopwatches can be used.
The precision of the stopwatch is one hundredth of a
second. The maximum measurement time is 10 hours.
1. To start the stopwatches, press the Select soft
key.
2. When you wish to stop the first stopwatch, press
the Select soft key. Repeat this step for the other
stopwatches.
3. Press the Reset soft key to reset the watches.
4. Press
114
or
to exit.
Games
Using this menu option, you can also enjoy playing
three games.
Scroll to the required game by pressing
and press the Select soft key.
or
The following options are available.
New Game: allows you to start a new game.
High Score: shows you the High Score table.
Key Info: shows you which keys do what within the
game.
Continue: allows you to continue a previously saved
game. This option is only available when a game has
already been saved.
While you are
playing a game, to...
Then press...
Adjust the game volume
The volume keys.
Pause the game
.
Pause and exit the game
.
115
OG
rgaam
ne
isser
OG
rgaam
ne
isser
Bowling
Menu 7-1
When you reach the finish line, the time spent and
your score are displayed.
The goal of the game is to knock down a triangular
group of ten pins by rolling a ball.
When you start a new game, you can select the
required mode, character and ball by pressing
.
When the game starts, the screen shows the character
and ball. Move the character first, then select the spin
and direction, and finally set the power of the ball.
Key Commands
To...
Then press...
Move left
,
or
.
Move right
,
or
.
Set the speed or spin
or throw the ball
,
or
Turn the sound on or off
.
Speed Up
To...
Then press...
Move left
,
or
.
Move right
,
or
.
Accelerate
.
Brake
.
Honey Ball
Menu 7-3
.
The goal of the game is to break honey blocks by
bouncing a ball between a bat and the honey blocks.
Menu 7-2
When you start a new game, the ball is sitting on the
bat in the middle of the screen. Once you start the ball
moving, you must position the bat, so that the ball
continues to bounce off it. Each time the ball hits a
honey block, the block breaks, sometimes revealing
letters that enhance the efficiency of the bat or ball:
The goal of the game is to get to the destination
without crashing in the shortest time possible.
When you start a new game, you can select a
destination, level of difficulty and vehicule. Once you
have selected all the options, “Ready?” is displayed and
the countdown starts.
116
Key Commands
B : the bat and ball change back to their standard form.
C: the ball sticks to the bat each time it hits it, giving
you time to optimise your position.
H: the bat increases in length.
P : the ball is changed into a power ball, so that it
no longer bounces off the blocks. It goes straight
through them, destroying anything that it touches.
117
Games
WWW Services
If you reach the final stage of the game, the rules are
slightly different. The honey blocks are much
stronger and need to be hit more than once before
they are destroyed. At the same time, small bees
attack the bat, damaging it a little each time until it
is destroyed and you lose a life.
Key Commands
To...
You can use your phone as a Web Browser. You can
obtain up-to-date news, weather, sport and other
information as well as use e-mail and other Internet
services.
Please contact your service provider to open your
Internet account. To use the Web Browser, you must
check that you have specified your mobile phone
number in the Own Number menu option.
Then press...
Slope up
.
Slope down
.
Move left
,
or
.
Move right
,
or
.
Hit the ball
,
Home
,
or
Menu 8-1
When you select this menu option, the phone
connects to the network and loads the homepage of
the Wireless Web service provider.
.
Once connected, the homepage is displayed. The
content depends on the service provider.
Note: To launch the browser from the idle mode,
press
in the centre of the scroll button.
To exit the browser, press
at any time.
The phone returns to the idle mode.
118
119
WWW Services
Bookmark
WWW Services
Menu 8-2
Goto
Menu 8-3
You can store the addresses of up to five Internet
sites for easy access using the Bookmark feature.
This menu option allows you to manually enter the
URL address of the Web site that you wish to access.
Three options are available.
Enter the URL address and press the G o soft key.
Edit: allows you to create or edit a local bookmark.
1. Enter the required title (up to 14 characters).
2. Press the O K soft key.
3. Enter the URL address (up to 128 characters).
4. Press the O K soft key.
G o: allows you to open the selected page.
Delete: allows you to delete the selected bookmark.
Navigating with the WAP Browser
You can surf the Internet using either the phone keys
or the WAP Browser menu.
Using the Phone Keys
When surfing the Internet, the phone keys function
differently from the phone mode.
To...
Scroll each line of the
content area
120
Then press...
or
.
Return to the previous page
(except on the
homepage).
Return to the startup
homepage
and hold it
down anywhere.
121
WWW Services
WWW Services
Using the WAP Browser Menu
There are various menu options available when surfing
the Wireless Web.
To access the WAP Browser menu, proceed as follows.
1. Press
.
A list of menu options appears.
2. Highlight the required option using
Show URL: shows the URL of the current page.
Clear Cache: allows you to clear the information
stored in the cache (the phone’s temporary memory
used to store the most recently accessed Web
pages).
About...: shows the version of the WAP Browser.
or
.
Entering Text, Numbers or Symbols
3. Press the left soft key to select the option.
4. If necessary, select the secondary option by
pressing
or
, followed by the left soft key.
Note: The WAP Browser menus may vary, depending
on your version of the browser.
The following options are available.
B a c k: returns to the previous page.
Home: takes you back at any time to the homepage of
the Wireless Web service provider.
Exit: exits the WAP Browser.
Inbox: stores received push messages or WAP data.
Reload: reloads the current page.
Advanced: gives you access to the following
advanced features. Some features may not be
supported by your network operator.
122
When you are prompted to enter text, the current
text entry mode appears above the right soft key
(ABC/abc). To change modes, press the right soft key.
Three options are displayed.
ABC/abc: allows you to enter lower-case and uppercase letters. You can switch between lower- and
upper-case letters by pressing
.
123: allows you to enter numbers.
Sym: allows you to enter various symbols and
punctuation marks. When you select this option, a
window is displayed with all available symbols. To
select the required symbol, use
.
If you wish to edit text, move the cursor to the
required position, using
and clear the incorrect
letter by pressing
. Then enter the correct letter.
123
Additional Services
Additional Services
ALS (Alternate Line Service)
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to ALS.
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make and
receive calls on either line. If you subscribe to this
network service, a few additional menu options
enable you to set up this feature.
Selecting a Line
You can set a line for each call via the Active Line
menu option. For further details, refer to page 85.
Setting the Ring Type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each line
via the Ring Tone menu option. For further details,
refer to page 74.
Setting Call Diverting Options
You can set up call diverting via the Call Diverting
menu option. This service reroutes incoming calls on
the line of your choice to a specified number. For
further details, see page 86.
Editing the Line Name
You can edit the name of each line via the O w n
Number menu option.
When you edit the name of a line, this name replaces
“Line 1” or “Line 2”, as applicable. For further details,
refer to page 81.
124
125
Solving Problems
Solving Problems
Before contacting the after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
When you switch your phone on, the following
messages appear
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The option requiring that the PIN be entered each
time the phone is switched on was enabled. You
must enter your PIN and then disable this option if
so required.
Enter PUK
• The PIN was entered wrongly three times in
succession and the phone is now blocked. Enter
the PUK supplied by your network operator.
126
“No Service” is displayed
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was not dialled
• Have you pressed
?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (
pressed for more
than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you speaking
• Have you switched off the microphone (Mute
appears)?
• Are you holding the phone close enough to your
mouth? The microphone is located on the bottom
right of the phone.
127
Solving Problems
Reference Information
The phone starts beeping and “**Warning** Battery
Low” flashes on the display
Access Codes
• The battery is insufficiently charged. Replace the
battery and recharge it or connect the travel adapter.
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
The audio quality of the call is poor
The access codes (except for the PUK and PUK2 codes)
can be changed using the Security Settings menu
option. See page 95 for further details.
• Check the signal strength indicator on the display ( );
the number of bars indicates the signal strength from
strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
Phone Password
No number is dialled when you recall a phonebook
entry
The phone password can be set to avoid unauthorised
use of the phone. The default password supplied with
the phone is 0000, but you are advised to change it
before you start using your phone. Keep the new code
secret and in a safe place, separate from the phone.
• Check that the numbers have been stored correctly,
by using the Phonebook Search feature.
• Re-store them, if necessary.
If you key in an incorrect password five times in
succession, the phone will not accept the correct code
for the next five minutes.
If the above guidelines do not help you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
128
129
Reference Information
Reference Information
PIN
PUK
The PIN (Personal Identification Number) protects your
SIM card against unauthorised use. It is usually
supplied with the SIM card. When the PIN Check
feature is enabled (see page 95), you must enter the
PIN each time you switch on the phone.
The PUK (Personal Unblocking Key) is required to
change a blocked PIN. The PUK may be supplied with
the SIM card. If not, contact your local service
provider.
If you key in an incorrect PIN three times in succession,
key in the PUK and press the OK soft key. Key in a new
PIN and press the OK soft key. Key in the new PIN
again and press the OK soft key.
PIN2
The PIN2, supplied with some SIM cards, is required to
access some functions, such as charging unit counters.
These functions are only available if supported by your
SIM card.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press the OK soft key.
Key in a new PIN2 and press the OK soft key. Key in
the new PIN2 again and press the OK soft key.
If you key in an incorrect PUK ten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
You cannot change the PUK. If you lose the code,
contact your service provider.
PUK2
The PUK2, supplied with some SIM cards, is required
to change a blocked PIN2.
If you key in an incorrect PUK2 ten times in
succession, you cannot use the functions requiring
the PIN2. Contact your service provider for a new
card.
You cannot change the PUK2. If you lose the code,
contact your service provider.
Call Barring Password
The 4-digit call barring password is required when you
use the Call Barring function. You obtain the password
from your service provider when you subscribe to this
function.
130
131
Reference Information
Reference Information
Health and Safety Information
Exposure to Radio-Frequency Energy
(SAR Information)
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver.
It is designed and manufactured, so as not to exceed
the limits for exposure to radio-frequency (RF) energy,
as recommended by the EU Council. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed by
independent scientific organisations through the
periodic and thorough evaluation of scientific studies.
The limits include a substantial safety margin
designed to ensure the safety of all persons,
regardless of age and health.
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as to
use only the power required to reach the network. In
general, the closer you are to a base station, the
lower the power output of the phone.
The highest SAR value for this model phone when
tested for compliance against the standard was
0.718W/kg. While there may be differences between
the SAR levels of various phones and various
positions, they all meet the EU requirements for RF
exposure.
The exposure standard for mobile phones employs a
unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by the
EU Council is 2.0W/kg.*
* The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged
over ten grams of body tissue. The limit incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in measurements. The SAR
values may vary depending on national reporting requirements and the network band.
132
133
Reference Information
Reference Information
P recautions When Using Batteries
• Your phone is powered by a rechargeable Li-ion
standard battery.
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby times
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging times depend on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time to
buy a new battery.
• If left unused, a fully charged battery will discharge
itself over time.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
• Use only Samsung-approved batteries and recharge
your battery only with Samsung-approved chargers.
When a charger is not in use, disconnect it from
the power source. Do not leave the battery
connected to a charger for more than a week, since
overcharging may shorten its life.
134
135
Reference Information
Reference Information
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But
an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your phone behind the wheel, practice good
common sense and remember the following tips.
1. Get to know your wireless phone and its features,
such as speed-dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If possible,
add an extra layer of convenience and safety to your
wireless phone with one of the many hands-free
accessories available today.
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice
mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic
or hazardous weather conditions. Rain, sleet, snow,
ice and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a to do list or flipping through
your phonebook takes your attention away from your
primary responsibility, driving safely.
136
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car is
stationary. If you need to make a call while moving,
dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that you
are driving and suspend conversations that have
the potential to divert your attention from the road.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is
a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives
are in danger, call the emergency number, as you
would want others to do for you.
10. Call roadside assistance or a special nonemergency wireless assistance number when
necessary. If you see a broken-down vehicle posing
no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a
vehicle you know to be stolen, call roadside
assistance or any other special non-emergency
wireless number.
137
Reference Information
Reference Information
Operating Environment
Remember to follow any special regulations in force in
any area and always switch off your phone whenever
it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the independent
research and recommendations of Wireless Technology
Research.
138
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone is
switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such interference,
you may wish to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch off your phone in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
139
Reference Information
Reference Information
Emergency Calls
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially Explosive Atmosphere s
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations
are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas (such
as propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally
be advised to turn off your vehicle engine.
140
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate
signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary by
location.
3. Press the
key.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before
you can make an emergency call. Consult this document
and your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
141
Reference Information
Reference Information
Other Important Safety Information
Care and Maintenance
• Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as the
phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including both installed or portable wireless
equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious
injury could result.
• Keep the phone and all its parts and accessories out
of the reach of small children.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode electronic
circuits.
• Do not touch the phone with wet hands while it is
charging. Doing so may give you an electric shock or
damage the phone.
• Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
142
143
Reference Information
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-andwater solution.
• Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
• Do not put the phone in or on heating devices, such
as a microwave oven, stove or radiator. The phone
may explode when overheated.
• Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you,
and if necessary, arrange for service.
144
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features of your mobile phone, here
are a few definitions.
Active Folder
Ability to voice dial or submit a voice command
immediately on opening the phone.
ALS (Alternate Line Service)
Capability of associating two lines with one SIM card.
With this service, you can make and receive calls on
either line, as required.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between the
two calls, as required.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
145
Glossary
Glossary
CLI (Caller Line Identification) Services
PUK (PIN Unblocking Key)
Service allowing subscribers to view or block the
telephone numbers of callers.
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Roaming
Multiparty Calling
SIM (Subscriber Identification Module)
Ability to establish a conference call involving up to
five additional parties.
Card containing a chip with all the information
required to operate the phone (network and memory
information, as well as the subscriber’s personal
data). The SIM card fits into a small slot on the back
of the phone and is protected by the battery.
Phone’s Password
Security code used to unlock the phone when you
have selected the option to lock it automatically each
time it switches on.
PIN (Personal Identification Number)
Security code that protects the phone/SIM against
unauthorised use. The PIN is supplied by the service
provider with the SIM card. It may be a four to eightdigit number and can be changed, as required.
146
Use of your phone when you are outside your home
area (when travelling for example).
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to speak
to the correspondent. The message created or
received (up to 160 characters long) can be
displayed, received, edited or sent.
147
Glossary
Index
Soft Keys
Two keys marked and on the phone, the
purpose of which:
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available, plays
a greeting (optionally in your own voice) and records
a message.
A
C (continued)
ABC mode • 44; 48
Access codes • 129
Accessories • 9
Active Folder • 84
Active Line • 85
Alarm • 103
Alert Type • 77
ALS • 124
Answering
calls • 26
second call • 33
AnswerPhone • 73
Any-key Answer • 82
Auto Answer • 83
Auto Redial • 83
Calls (continued)
received • 57
records • 57
redialling • 25
automatically • 83
rejecting • 27
ring tone • 40
searching for a number in
the phonebook • 42
time • 58
via the phonebook • 42
voice functions • 69
waiting • 33; 91
Care • 143
Changing
passwords
call barring • 90
phone • 97
PIN • 96
PIN2 • 98
text input modes • 45
Characters
entering • 44
Charging batteries • 19
Clock • 110
Closed User
Group • 94
Colour
service light • 41; 99
Command
voice • 71
Composing melodies • 75
Conference calls
• See Multiparty calls
Connect
to Voice Mail • 60
Tone • 79
Conversion • 111
Copying phonebook
entries • 40
Correcting numbers • 24
Cost of calls • 59
CUG • 94
B
Backlight • 15; 82
Barring
calls • 89
password • 90; 131
Batteries
charging • 19
installing • 17
low battery indicator • 21
precautions • 134
Brightness • 99
Broadcast • 65
Browser
settings • 100
using • 119
C
148
Calculator • 105
Calendar • 108
Caller ID • 84
Calls
alert types • 40; 77
answering • 27
second call • 33
barring • 89
cost • 59
dialled • 58
diverting • 86
emergency • 141
ending • 25
holding • 32
international • 24
making • 24
missed • 28; 57
multiparty • 34
D
Date setting • 110
Deleting
melodies • 77
messages • 62
missed calls • 29
149
Index
Index
D (continued)
I
M (continued)
P
Deleting (continued)
phonebook entries • 40
schedule events • 101
to do list tasks • 108
voice commands • 71
voice dial numbers • 71
voice memos • 73
Dialled Calls • 58
Dialling • 24
phonebook numbers • 42
speed • 41
voice • 69
Icons • 14
Identifying
callers • 84
lines • 93
Information numbers • 43
Input mode
changing • 45
setting • 81
International calls • 24
Internet • 119
brightness • 99
external • 15
icons • 14
language • 81
main • 13
settings • 98
Diverting calls • 86
Key tones
muting • 36
selecting • 78
sending • 36
volume • 26
Keys
location • 10
purpose • 11
Messages • 60
broadcast • 65
greeting • 80
picture • 67
preset • 64
reading • 61
ring tones • 74
setup • 64
tone • 78
voice mail • 60
writing • 63
Microphone mute • 30
Minute Minder • 79
Missed Calls • 29; 57
Multiparty calls • 34
Music box • 74
Mute
key tones • 36
microphone • 30
Pacemakers • 138
Password
barring • 131
changing • 90
phone • 129
changing • 97
Pasting phonebook numbers • 39
Personal Identification Number
• See PIN
Phone
layout • 10
lock • 96
password • 97; 129
settings • 80
switching on/off • 22
Phonebook • 37
copying numbers • 40
deleting recorded names • 39
dialling • 42
editing numbers • 40
erasing numbers • 40
making calls • 42
memory status • 40
options • 38
pasting numbers • 39
playing recorded names • 39
ring tones • 40
searching • 42
speed-dialling • 41
storing numbers/names • 37
voice recording • 39
Picture Messages • 67
PIN • 130
changing • 96
checking • 95
PIN2 • 130
changing • 98
Power On/Off • 78
Preset Message List • 64
Problem solving • 126
PUK • 131
PUK2 • 131
Display
E
K
N
FDN Mode • 97
Fixed Dial Number mode • 97
Functions
selecting • 51
Language • 81
Last number redialling • 25
LCD
brightness • 99
external • 15
icons • 14
language • 81
main • 13
settings • 98
Length of calls • 58; 79
Letters
entering • 44
Line Identification • 93
Locking
phone • 96
SIM card • 97
Low battery indicator • 21
Names
entering • 44
searching/dialling • 42
storing • 37
voice dial • 69
Network Selection • 92
Network Services • 86
Numbers
correcting • 24
FDN • 97
information • 43
mode • 44; 50
own • 81
redialling • 25
searching/dialling • 42
speed-dial • 41
storing • 37
voice dial • 69
voice server • 61
G
M
O
Games • 115
Graphic Logo • 99
Greeting Message • 80
Maintenance • 143
Medical devices • 139
Melody Composer • 75
Memory status • 40
Memos • 72
Menus
animation • 99
scrolling • 53
skin • 99
structure • 54
Options
phonebook • 38
selecting • 51
Organiser • 101
Own Number • 81
Ear-microphone • 23
Earpiece volume • 26
Editing
missed calls • 29
phonebook entries • 40
to do list • 107
Emergency calls • 141
Ending calls • 25
Error Tone • 79
Explosive atmospheres • 140
External display • 15
F
H
Health • 132
Hearing aids • 139
Holding calls • 32
150
L
R
Radio-frequencies • 132
Read Messages • 61
Received Calls • 57
Recording
voice commands • 71
voice dial names • 69
voice memos • 72
Records
call • 57
151
Index
R (continued)
S (continued)
Redialling
automatically • 83
last number • 25
Rejecting calls • 27
Replaying
voice commands • 71
voice dial tags • 71
voice memos • 72
Reset Settings • 85
Ring Tone • 74
phonebook • 40
Ring Volume • 77
Road safety • 136
Roaming • 92
Stopwatch • 114
Switching on/off
microphone • 30
phone • 22
Symbolic mode • 44; 50
152
.
Briefly press
➁ Say the name.
Provided that the name
is recorded and the
Active Folder menu
option is set to Voice
Dial:
➀ Open the phone.
(Voice Dial)
➀ Key in the number.
➁ Press
.
(Direct Call)
Make a Call
End a Call
• Each of the two soft keys ( and )
performs the function indicated by the
text above it (bottom line in the display).
W
➂ Scroll with
or
through the list of options
until the required option
is selected.
➃ Press the left soft key to
confirm.
Voice
command • 71
dial • 69
functions • 69
language • 81
mail
connecting to • 60
server number • 61
memo • 72
server number • 61
Volume
earpiece • 26
keys • 26
ring • 77
➁ Scroll with
or
through the main menus
until you reach the
required menu.
V
Press and hold down
.
User groups • 94
Switch On/Off
U
➀ Press the Menu soft key.
input modes • 44
language • 81
Time
setting • 110
world • 109
Timer • 113
To Do List • 107
Tones • 74
connect • 79
error • 79
keypad • 78
message • 78
ring • 40; 74
Travel adapter • 19
Access
the Menu
Function
entering • 44
Quick Reference Card
Safety
batteries • 134
electronic devices • 138
explosive atmospheres • 140
information • 132; 142
medical devices • 139
operating environment • 138
precautions • 7
road • 136
Scheduler • 101
Searching/dialling
phonebook numbers • 42
Second call • 33
Security Settings • 95
Selecting functions/options • 51
Sending key tones • 36
Service directory • 43
Service Light • 16; 83
colour • 41; 99
Settings
alarm • 104
browser • 100
date • 110
LCD/LED • 98
network • 86
phone • 80
reset • 85
security • 95
text language • 81
time • 110
Setup • 64
SIM card
installing • 17
locking • 97
SMS • See Messages
Soft keys • 51
Solving problems • 126
Speed-dialling • 41
T9 mode • 44; 46
Text
SGH-T400 GSM Telephone
S
T
Waiting
call • 33; 91
Wallpaper • 98
WAP Browser • 119
World Time • 109
Write Messages • 63
WWW Services • 119
153
Answer a
Call
Adjust the
Volume
Store
Numbers
in the
Phonebook
.
Open the phone
or
Press
Press the volume keys
on the left side of the
phone.
➀ Key in the number.
➁ Press the Save soft
key.
➂ Enter the name.
➃ Press the Save soft
key.
➄ If necessary, change
the location.
➅ Press the OK soft key.
➁ Press the Options soft key.
➀ Press the PhoneBook
soft key.
➄ To make a call,
press
.
➃ To scroll through the
names, press
or
.
➂ Press the Find soft key.
Search for ➀ Press the PhoneBook
a Number
soft key.
in the
➁ Enter the start of the
Phonebook
name.
Record a
Name for
Voice
Dialling
➂ Select the Voice Record
option.
➃ Record the name and
follow the instructions.
154
Download PDF

advertising