Samsung | SGH-X670 | Samsung SGH-X670 User Manual

SGH-X670
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switch off the phone near all medical
equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Qualified service
Emergency calls
For more detailed safety information, see "Health and
safety information" on page 91.
Key in the emergency number for your present
location, then press
.
Important safety precautions
Interference
Only qualified service personnel may repair your
phone.
1
About this Guide
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety
or phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
[
]
< >
2
Indicates a key on the phone. For example,
[
].
Indicates a soft key, whose function is displayed
on the phone screen. For example, <Menu>
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special features of your phone
•
Music player
Play MP3 music files using your
phone as a music player.
•
FM radio
Listen to your favourite radio
channels anytime, anywhere.
•
•
•
Get personal with photo caller
ID
See who’s calling you when their
very own photo displays.
Name card
Create name cards with your
number and profile. Whenever
introducing yourself to others, use
this convenient electronic name
card.
•
E-mail
Send and receive e-mails with images, video, and
audio attachments.
•
Printing via Bluetooth
Print images, messages, and
personal data directly from your
phone.
•
Web browser
Access the wireless web to get upto-the-minute information and a
wide variety of media content.
•
Java
Enjoy Java™-based embedded
games and download new games.
Special features of your phone
•
Bluetooth
Transfer media files and personal
data and connect to other devices
using free, wireless Bluetooth
technology.
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, video, and audio.
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Buttons, features, and locations
Get started
7
First steps to operating your phone
4
Listen to the FM radio .............................................
Browse the web......................................................
Use Phonebook ......................................................
Send messages ......................................................
View messages.......................................................
Use Bluetooth ........................................................
Quickly launch menus by number .............................
17
18
19
20
21
22
23
Enter text
24
ABC, T9, Number, and Symbol modes
Call functions
Install and charge the phone ..................................... 7
Power on or off........................................................ 8
Keys and display ..................................................... 9
Access menu functions ............................................ 11
Customise your phone............................................. 12
Make/Answer calls .................................................. 15
Advanced calling features
Step outside the phone
Help and personal needs
15
Menu functions
26
30
All menu options listed
Solve problems
89
Begin with your camera, the music player, the radio, web,
and other special features
Health and safety information
91
Use the camera ...................................................... 15
Play music files....................................................... 16
Index
98
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Call records
p. 30
3 Applications
p. 36
5 Messages
1
2
3
4
5
6
7
p. 30
p. 31
p. 31
p. 31
p. 31
p. 31
p. 32
1 Music Player
2 Voice recorder
3 Java world
4 FM radio
5 World time
6 Alarm
7 Calculator
8 Converter
9 Timer
10 Stopwatch
11 SIM AT*
p. 37
p. 38
p. 39
p. 40
p. 42
p. 42
p. 43
p. 44
p. 44
p. 44
p. 45
1
2
3
4
5
6
7
4 Browser
p. 45
1
2
3
4
5
6
p. 45
p. 46
p. 47
p. 47
p. 47
p. 48
Recent contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call costs*
2 Phonebook
p. 32
1
2
3
4
5
6
7
8
9
p. 32
p. 33
p. 33
p. 34
p. 35
p. 35
p. 36
p. 36
p. 36
Contact list
FDN list
Add new contact
Group
Speed dial
My name card
Own number
Management
Service number*
Home
Bookmarks
Goto URL
Clear cache
Profile settings
Current profile
p. 48
Create new message p.
My messages
p.
Templates
p.
Delete all
p.
Settings
p.
Broadcast messages p.
Memory status
p.
49
52
56
57
57
64
64
6 File manager
p. 64
1
2
3
4
5
6
p. 65
p. 66
p. 67
p. 67
p. 68
p. 68
Images
Videos
Music
Sounds
Other files
Memory status
7 Calendar
p. 68
8 Camera
p. 72
9 Settings
p. 77
1 Time & Date
2 Phone settings
3 Display settings
4 Sound settings
5 Light settings
6 Network services
7 Bluetooth
8 Security
9 Memory status
10 Reset settings
11 VOD settings**
p. 77
p. 78
p. 79
p. 80
p. 82
p. 82
p. 84
p. 87
p. 88
p. 88
p. 89
* Shows only if supported by your
SIM card.
**Shows only if supported by your
service provider.
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Phone
Travel Adapter
Display
Camera lens
Web access/
Confirm key
Battery
User’s Guide
You can obtain various accessories from
your local Samsung dealer.
The items supplied with your phone
and the accessories available at your
Samsung dealer may vary, depending
on your country or service provider.
6
Headset jack
Left soft key
Dial key
Volume keys
Navigation keys
(Up/Down/Left/
Right)
Right soft key
Power on/off/
Menu exit key
Delete key
Alphanumeric
keys
Special
function keys
Microphone
Camera key
External
display
Get started
Install the battery.
First steps to operating your phone
Plug the travel adapter
into the phone.
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery.
Insert the SIM card.
Plug the adapter into a standard AC wall outlet.
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
If the phone is already
on, first turn it off by
holding [
].
Make sure that the goldcoloured contacts on the
card face down into the
phone.
7
Get started
Remove the adapter from the phone.
Power on or off
Switch on
1. Open the phone.
2. Press and hold [
the phone.
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the low battery message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
] to turn on
Do not turn on
the phone when
mobile phone
use is prohibited.
3. If necessary, enter the PIN and
press <OK>.
Switch off
1. Open the phone.
2. Press and hold [
].
Keys and display
Keys
In Idle mode, access your favourite menus
directly.p. 78
In Menu mode, scroll through menu options.
In Idle mode, launch the web browser.
In Menu mode, select the highlighted menu
option or confirm input.
Make or answer a call.
In Idle mode, retrieve the recent numbers
dialled, missed, or received.
Delete characters from the display and
selected item in an application.
End a call.
Press and hold to switch the phone on or off.
In Menu mode, cancel input and return the
phone to Idle mode.
Get started
Perform the function indicated on the bottom
line of the display.
Enter numbers, letters, and some special
characters.
In Idle mode, press and hold [1] to access
your voicemail server. Press and hold [0] to
enter an international call prefix.
Enter special characters.
In Idle mode, press and hold [ ] to activate
or deactivate Quiet mode. Press and hold
[ ] to enter a pause between numbers.
Adjust the phone volume.
In Idle mode, with the phone open, adjust
the keypad tone volume. With the phone
closed, press and hold to activate the
backlight.
In Idle mode, press and hold to turn on the
camera.
In Camera mode, take a photo or record a
video.
9
Get started
Display
One of the message Inboxes is full
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Menu
Icons*
Contacts
Soft key function
indicators
show the current functions
assigned to the soft keys.
Bluetooth activep. 84
Connected with a computer via a
USB port
GPRS network
EDGE network
Home Zone, if registered for the
appropriate service
Received signal strength
Office Zone, if registered for the
appropriate service
Call in progress
Ringer typep. 80
Out of your service area; you
cannot make or receive calls
• None: Melody
Alarm setp. 42
New text message
New multimedia message
New e-mail
New voicemail
10
Call diverting feature activep. 83
•
: Vibration
•
: Melody and vibration
•
: Vibration then melody
•
: Melody then vibration
Quiet modep. 14
Mute mode, during a call
Battery power level
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Select
Press the left
soft key to select
the highlighted
option.
Get started
* Depending on your country or service provider, the icons
shown on the display may vary.
Access menu functions
Back
Press the right
soft key to return
to the previous
menu level.
11
Get started
Select an
option
1. Press the appropriate soft key.
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <Select> or [
] to
confirm the function displayed
or option highlighted.
4. To exit, choose either of the
following methods.
• Press <Back> to move up
one level.
• Press [ ] to return to Idle
mode.
Use shortcuts
12
Press the number key
corresponding to the option you
want.
Customise your phone
Display
language
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Language.
2. Select a language.
Call ringer
melody
1. In Idle mode, press <Menu>
and select Settings → Sound
settings → Incoming call →
Ring tone.
2. Select a ringtone category.
3. Select a ringtone.
4. Press <Save>.
Idle mode
wallpaper
You can set wallpaper for the idle
screen on each display.
For the main display:
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Wallpaper → Main
display.
For Wallpaper images, select
an image category, scroll to an
image and press <Save>.
2. Select an image category.
3. Select an image.
For the external display:
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Wallpaper →
Cover display.
2. Select an image type.
Get started
3. For Clock, scroll to a clock type
and press <Save>.
For Cover title, enter a
greeting and press [
].
Menu mode
skin colour
You can change the colour for the
display components, such as title
bars and highlight bars.
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Skin.
2. Select a colour pattern.
13
Menu
shortcuts
You can set the Navigation keys to
function as shortcuts to access
your favourite menus.
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Short cut.
Quiet mode
Phone lock
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on power-up.
2. Select a menu to be assigned to
the key.
1. In Idle mode, press <Menu>
and select Settings →
Security → Change
password.
You can switch the phone to Quiet
mode to avoid disturbing other
people.
3. Enter a new 4- to 8-digit
password and press <OK>.
Press and hold [
] in Idle mode.
2. Enter the default password,
00000000, and press <OK>.
4. Enter the new password again
and press <OK>.
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
<OK>.
14
Make/Answer calls
Make a call
Step outside the phone
Begin with your camera, the music player, the radio, web,
and other special features
2. Press [
Use the camera
].
3. To end the call, press [
Answer a call
1. When the phone is ringing,
press [ ].
2. To end the call, press [
Adjust the
volume during
a call
].
Press [ / ].
].
Take a photo
Step outside the phone
1. In Idle mode, enter an area
code and phone number.
1. Open the phone.
2. In Idle mode, press and hold
[ ] to turn on the camera.
3. Aim the lens at the subject and
make any desired adjustments.
4. Press [ ] to take a photo. The
photo is saved automatically.
5. Press <Back> to take another
photo.
15
Step outside the phone
View a photo
1. In Idle mode, press <Menu>
and select File manager →
Images → Photos.
2. Select the photo you want.
Play music files
Copy music
files to the
phone
Use these methods:
• Download from the wireless
webp. 45
• Download from a computer
using Samsung PC
StudioSamsung PC Studio
User’s Guide
• Receive via Bluetoothp. 87
Create a play
list
1. In idle mode, press <Menu>
and select Applications →
Music Player.
Record a video 1. In Idle mode, press and hold
[ ] to turn on the camera.
2. Press [1] to switch to Record
mode.
3. Press [
] to start recording.
4. Press < > to stop recording.
The video is saved
automatically.
5. Press <
video.
Play a video
> to record another
1. In Idle mode, press <Menu>
and select File manager →
Videos → Videos.
2. Select the video you want.
16
2. Press <Options> and select
Add to list → Add all or Add a
file.
3. For Add a file, press [Centre]
to select the files you want and
press <Add>.
4. Press <Back> to return to the
music player screen.
Play music files 1. From the music player screen,
press [
].
Listening to the 1. Plug the connector of the
headset into the jack on the left
radio
side of the phone.
Step outside the phone
2. During playback, use the
following keys:
•
: pauses or resumes
playback.
• Up: accesses the play list.
• Left: moves back to the
previous file. Moves
backward in a file when held
down.
• Right: skips to the next file.
Skips forward in a file when
held down.
• Volume: adjusts the
volume.
• Down: stops playback.
Listen to the FM radio
2. In Idle mode, press <Menu>
and select Applications → FM
radio.
3. Press <Options> and select
FM radio on.
4. Press [Left] or [Right] to find
available radio stations.
5. To turn off the radio, disconnect
the headset.
17
Step outside the phone
Storing a radio
station
1. From the FM radio screen, press
<Options> and select Add.
2. Enter the title of the station and
press [Down].
3. Enter the frequency of the
station and press <Save>.
4. Select an empty location.
Browse the web
Using a built-in web browser, you can easily access the
wireless web to get a variety of up-to-date services
and information and to download web content.
Launch the
web browser
18
In Idle mode, press [
], or
press <Menu> and select
Browser → Home.
Navigate the
web
•
To scroll through browser items,
press [Up] or [Down].
•
To select an item, press [
•
To return to the previous page,
press <Back> or [C].
•
To access browser menu
options, press [ ] or select .
To access web page options,
press [ ].
•
].
Use Phonebook
Find an entry
Add an entry
To the phone’s memory:
3. Select an entry.
2. Select Phone → a number type.
4. Press <Save> to save the
entry.
To the SIM card:
1. In Idle mode, enter a phone
number and press <Save>.
2. Select SIM.
3. Enter a name.
4. Press [
] to save the entry.
Step outside the phone
2. Enter the first few letters of the
name you want.
1. In Idle mode, enter a phone
number and press <Save>.
3. Specify contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Graphic ID, Alert, Group, and
Notes.
1. In Idle mode, press
<Contacts>.
4. Scroll to a number and press
[
] to dial or press [
] to
edit contact information.
Create and
send a name
card
1. In Idle mode, press <Menu>
and select Phonebook → My
name card.
2. Specify your contact
information.
3. Press <Save> to save the
name card.
4. To send the name card, press
<Options> and select Send
via → a sending method.
19
Step outside the phone
Send messages
1. In Idle mode, press <Menu>
Send a text
and select Messages → Create
message (SMS)
new message → Text
message.
2. Enter the message text.
3. Press <Options> and select
Save and send or Send only.
4. Enter destination numbers.
5. Press [
] to send the
message.
Send a
multimedia
message
(MMS)
1. In Idle mode, press <Menu>
and select Messages → Create
new message → Multimedia
message.
2. Select Subject.
3. Enter the message subject and
press [
].
20
4. Select Picture & Video or
Sound.
5. For Picture & Video, select
Add image or Add video and
add an image or video clip.
For Sound, select Add sound
and add a sound clip.
6. Select Message.
7. Enter the message text and
press [
].
8. Press <Options> and select
Send.
9. Enter destination numbers or
e-mail addresses.
10. Press [
] to send the
message.
2. Select Subject.
View messages
View a text
message
From the Inbox:
4. Select Message.
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
5. Enter the e-mail text and press
[
].
6. Select File attach.
8. Press <Options> and select
Send.
9. Enter e-mail addresses.
10. Press [
] to send the e-mail.
1. Press <View>.
2. Select the message from the
Inbox.
3. Enter the e-mail subject and
press [
].
7. Add image, video, sound, music
files, or document files.
When a notification appears:
Step outside the phone
Send an e-mail 1. In Idle mode, press <Menu>
and select Messages → Create
new message → Email.
2. Select an SMS message (
View a
multimedia
message
).
When a notification appears:
1. Press <View>.
2. Select the message from the
Inbox.
21
Step outside the phone
Use Bluetooth
From the Inbox:
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
2. Select an MMS message (
View an e-mail
).
1. In Idle mode, press <Menu>
and select Messages → My
messages → Email box.
2. Select Check new mail to
download new e-mails or
headers.
3. Select an e-mail or a header.
4. If you selected a header, press
<Options> and select
Retrieve to view the body of
the e-mail.
22
Your phone is equipped with Bluetooth technology,
enabling you to connect the phone wirelessly to other
Bluetooth devices and exchange data with them, talk
hands-free, or control the phone remotely.
Turn on
Bluetooth
In Idle mode, press <Menu> and
select Settings → Bluetooth →
Activation → On.
Search for and
pair with a
Bluetooth
device
1. In Idle mode, press <Menu>
and select Settings →
Bluetooth → My devices →
Search new device.
2. Select a device.
3. Enter a Bluetooth PIN or the
other device’s Bluetooth PIN, if
it has one, and press <OK>.
When the owner of the other
device enters the same code,
pairing is complete.
Send data
1. Access an application,
Phonebook, File manager, or
Calendar.
3. Press <Options> and select
Send via → Bluetooth.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press <OK>.
Receive data
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
If necessary, press <Yes> to
confirm that you are willing to
receive.
Access
applications
You can quickly access the text
message, alarm, calendar, and
converter applications from the
dialling screen.p. 78
1. For an alarm or scheduled item,
enter the time you want as 4digit in Idle mode.
For the converter, enter the first
number you want to use.
2. Press one of the Navigation
keys.
You can access the following
applications:
Key
Application
Up
Alarmp. 42
Down converterp. 44
Left
Text messagep. 49
Right
Calendarp. 68
23
Step outside the phone
2. Scroll to an item.
Quickly launch menus by number
Enter text
ABC, T9, Number, and Symbol modes
You can enter text in some features, such as
Messages, Phonebook, or Calendar, using ABC mode,
T9 mode, Number mode, and Symbol mode.
Using ABC mode
Press the appropriate key until the character you want
appears on the display.
Key
Characters in order displayed
Upper case
Lower case
Changing the text input mode
•
•
•
Press and hold [ ] to switch between T9 mode
(
) and ABC mode (
).
Press and hold [ ] to switch to Symbol mode
(
).
Press [ ] to change case or switch to Number
mode (
).
(Creating an SMS message with GSM-alphabet encoding)
24
Other ABC mode operations
•
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter Hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Enter text
•
•
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Other T9 mode operations
•
•
•
•
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
25
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Spell appears on the bottom line.
3. Press <Spell>.
4. Enter the word you want using ABC mode and
press <Add>.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Using Symbol mode
Symbol mode enables you to insert symbols.
26
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered symbols
[C].
insert the symbols
<OK>.
Call functions
Advanced calling features
Making a call
1. In Idle mode, enter the area code and phone
number.
2. Press [ ].
• Press [C] to clear the last digit or press and hold
[C] to clear the whole display.
• Press and hold [ ] to enter a pause between
numbers.
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
Making a call from Phonebook
Answering a call
Once you have stored a number in Phonebook, you
can dial the number by selecting it from Phonebook.
p. 32
When you receive an incoming call, the phone rings
and displays the incoming call image.
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
keys.p. 35
Tips for answering a call
•
] to answer the call.
When Anykey answer is active, you can press
any key, except for <Reject> and [ ].p. 79
When Active folder is active, you can simply open
the phone.p. 79
Press <Reject> or [ ] to reject a call.
Press and hold [ / ] to reject a call or mute the
ringer, depending on the Volume key
setting.p. 79
You can quickly dial a number from the SIM card using
its location number assigned when stored.
1. In Idle mode, enter a location number and press
[ ].
2. Press [Left] or [Right] to scroll through other
numbers.
3. Press <Dial> or [ ] to dial the number you want.
•
•
Ending a call
Viewing missed calls
Close the phone or press [
].
•
Call functions
Press <Accept> or [
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
27
Call functions
Using the headset
Using the speakerphone feature
Use the headset to make or answer calls without
holding the phone.
Use the speakerphone feature to talk and listen with
the phone a short distance away.
Connect the headset to the jack on the left side of the
phone. The button on the headset works as follows:
To
Press
Placing a call on hold/Retrieving
redial the last call
the button and then press
and hold it again.
Press <Hold> or <Retrieve> to place a call on hold
or retrieve the call.
answer a call
and hold the button.
Making a second call
end a call
and hold the button.
You can make another call if your network supports
this function.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select End held call to end
the call on hold.
5. To end the current call, press [ ].
Options during a call
You can access a number of functions during a call.
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
28
Press [
] to activate the speakerphone feature.
Press the key again to switch back to the earpiece.
Answering a second call
•
•
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
•
•
Using In-call options
Press <Options> to access the following options
during a call:
• Voice clarity on/Voice clarity off: remove
extraneous noise and increase call quality so that
the person with whom you are speaking can hear
you clearly even if you are in a noise place.
If you are using the speakerphone feature, you
must first deactivate it in order to use the Voice
Clarity feature.
Mute/Unmute: switch off the phone’s microphone
so that the other person on the phone cannot hear
you, or switch it back on.
Mute keys/Send keys: switch the key tones on
or off.
•
•
Phonebook: access the contact list.
Send DTMF: send the DTMF (Dual tone multifrequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Message: create and send an SMS message or
access received messages.p. 49
SIM service: access special services, such as
news, weather forecasts, entertainment, and
location services, provided by your SIM card. This
option is available when you use a SIM card
supporting SIM AT menus.
29
Call functions
You can answer an incoming call while already on the
phone, if your network supports this function and you
have activated the call waiting feature.p. 83
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select End held call to end
the call on hold.
4. To end the current call, press [ ].
•
•
•
•
•
•
30
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
End held call: disconnect the call currently on
hold.
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
Split: have a private conversation with one multiparty call participant. The other participants can
converse with each other. After the private
conversation, select Join to return both all private
participants to the multi-party call.
Remove: disconnect one multi-party call
participant.
Switch to headset/Switch to phone: switch the
call to a Bluetooth headset or hands-free car kit or
back to the phone. p. 85
Menu functions
All menu options listed
Call records (Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of calls. You can
also check the cost of your calls, if your SIM card
supports this function.
To access this menu, press <Menu> in Idle mode and
select Call records.
Recent contacts (Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call record
1. Press [Left] or [Right] to move to another call
type.
2. Press [Up] or [Down] to scroll through the call list.
3. Press [
] to view the details of a call, or [ ] to
dial a number.
Using call record options
Received calls (Menu 1.4)
From the call list, press <Options> to access the
following options:
• Details: access the call details.
• Call: make a voice call to the number.
• Save as contacts: save the number to
Phonebook.
• Send message: send an SMS or MMS message to
the selected number.
• Delete: delete the selected call record or all
records.
This menu displays the most recent calls you have
received.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
Use this menu to delete all of the records in each call
type.
1. Press [
] to select the call types to be cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Call records (Menu 1)
This menu displays the most recent calls you did not
answer.
Menu functions
Missed calls (Menu 1.2)
Delete all (Menu 1.5)
Call time (Menu 1.6)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total sent: check the total length of all the calls
you have dialled.
• Total received: check the total length of all the
calls you have received.
31
Menu functions
•
Reset timers: reset the call timers. You need to
enter the phone password.
The password is preset to 00000000. You can
change this password.p. 87
Call costs (Menu 1.7)
This network feature displays the cost of calls. This
menu is available only if supported by your SIM card.
Note that this is not intended to be used for billing
purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
• Max cost: check the maximum cost limit set in
Set max cost.
• Reset counters: reset the cost counters.
• Set max cost: set the maximum cost authorised
for your calls.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
32
Phonebook
(Menu 2)
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
To access this menu, press <Menu> in Idle mode and
select Phonebook.
Contact list (Menu 2.1)
Use this menu to search for numbers in Phonebook.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
2. Select the name from the list.
3. Scroll to a number and press [ ] to dial, or press
[
] to edit contact information.
Using Phonebook options
While viewing contact details, press <Options> to
access the following options:
• Edit: edit contact information.
•
•
•
•
Use this menu to create a list of contacts to be used in
FDN (Fixed Dialling Number) mode, in which the
phone allows outgoing calls only to the specified
phone numbers, if your SIM card supports this
feature. You can activate FDN mode in the FDN mode
menu.p. 88
1. From the FDN list, press <Options> and select
Add.
2. Enter your PIN2 and press <OK>.
3. Enter information about the contact:
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
4. Press <Save>.
Phonebook (Menu 2)
FDN list (Menu 2.2)
Adding a contact
Menu functions
•
Send message: send an SMS or MMS message to
the selected number, or an e-mail to the selected
address.
Copy: copy the contact to the phone’s memory, to
the SIM card, or the FDN list.
Send via: send the contact via SMS, MMS, e-mail,
or Bluetooth.
Delete: delete the selected contact.
Print via Bluetooth: print the contact information
via a Bluetooth-compatible printer. Some printers
may not be compatible with the phone.
Using contact options
You can access contact options by pressing
<Options> in Contact list.
Add new contact (Menu 2.3)
Use this menu to add a new contact to Phonebook.
Storing a number in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about the
contact.
• First name/Last name: assign a name.
33
Menu functions
Mobile/Home/Office/Fax/Other: add a
number in any type.
• Email: assign an e-mail address.
• Graphic ID: assign an image to alert you to a
call from the person.
• Alert: assign a ringtone to alert you to a call
from the person.
• Group: assign the contact to a caller group.
• Notes: add a memo about the person.
3. Press <Save> to save the contact.
Group (Menu 2.4)
Storing a number on the SIM card
While viewing the group list, press <Options> to
access the following options:
• View: display the members of the selected group.
• Add: add a new group.
• Edit: change the group properties.
• Send message: send an SMS, MMS, or e-mail
message to the group members you want.
• Delete: delete the selected group. Group
members, however, will not be deleted from
Phonebook.
•
1. Select SIM.
2. Enter information about the contact.
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
To assign a caller ID image, ringtone, or group,
the contact must be saved to the phone’s
memory.
3. Press <Save> to save the contact.
34
Use this menu to organise your contacts in caller
groups.
Adding members to a caller group
1. Select a group.
2. Press <Add> and select a contact.
3. To add more contacts, press <Options> and
select Add → a contact.
Managing caller groups
My name card (Menu 2.6)
Use this menu to assign a speed dial number (2 to 9)
for 8 of your most frequently called numbers.
Use this menu to create a name card and send it to
other people.
Assigning speed dial numbers
Saving your name card
1. Select a key location from 2 to 9. Key 1 is reserved
for your voicemail server.
2. Select a contact from the contact list or the FDN
list.
3. Select a number, if the contact has more than one
number.
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 33
From the Speed dial screen, press <Options> to
access the following options:
• Add: assign a number to an unassigned key.
• View: check the name and number assigned to a
key.
• Change: assign a different number to a key.
• Remove: clear the speed dial setting for a key.
Dialling speed dial entries
In Idle mode, press and hold the appropriate key.
Using name card options
After saving your name card, press <Options> to
access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS, MMS,
e-mail, or Bluetooth.
• Exchange namecard: exchange name cards with
another person via Bluetooth.
• Remove: delete the name card.
• Print via Bluetooth: print the name card
information via a Bluetooth-compatible printer.
Some printers may not be compatible with the
phone.
Phonebook (Menu 2)
Managing speed dial entries
Menu functions
Speed dial (Menu 2.5)
35
Menu functions
Own number (Menu 2.7)
Service number (Menu 2.9)
Use this menu to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your SIM
card supports SDN.
1. Scroll to the number you want.
2. Press <Dial> or [ ].
Management (Menu 2.8)
Use this menu to manage Phonebook entries.
• Default saving: select a default memory location
for saving contacts. If you select Ask on saving,
the phone will ask you to select a memory location
each time you save a number.
• Copy all to: copy all of the contacts stored on the
SIM card to the phone’s memory, or vice versa.
• Sort by contacts: sort your contacts by the first
name or last name.
• Delete all: delete all of the contacts from your
phone’s memory, your SIM card, or the FDN list.
• Memory status: check the number of contacts
you have stored in the phone’s memory, on the
SIM card, and the FDN list.
36
Applications
(Menu 3)
Use this menu to play Java games, play music files,
and listen to the FM radio. You can also use convenient
features, such as a voice recorder, alarm clock,
calculator, converter and stopwatch.
To access this menu, press <Menu> in Idle mode and
select Applications.
Music Player (Menu 3.1)
Use this menu to enjoy music. First, you need to save
music files into your phone’s memory.
The downloaded or received files are stored in the
Music folder.p. 67
Playing music files
From the music player screen, press [
Key
Function
Pauses or resumes playback.
Left
Moves back to the previous file. Moves
backward in a file when pressed and held.
Right
Skips to the next file. Skips forward in a
file when pressed and held.
Up
Opens the play list.
Creating a play list
1. From the music player screen, press <Options>
and select Add to list.
2. Select either of the following options:
• Add all: add all of the files in the phone’s
memory to the play list.
• Add a file: add a specific file to the play list.
].
During playback, use the following keys:
Down
/
3
Applications (Menu 3)
Use these methods to save music files to your phone’s
memory:
• Download from the wireless webp. 45
• Download from a computer using the optional
Samsung PC StudioSamsung PC Studio User’s
Guide
• Via an active Bluetooth connectionp. 87
Menu functions
Downloading or receiving music files
3. If you select Add a file, press [
] to select files
you want and press <Add>.
4. Press <Back> to return to the music player
screen.
Stops playback.
Adjusts the volume level.
Changes the repeat mode.
37
Menu functions
Key
6
•
Turns Shuffle mode on or off.
Accessing the play list
Using music player options
While playing a file, press <Options> to access the
following options:
• Play/Pause: begin or pause playback.
• Send via: send the current file via e-mail or
Bluetooth.
• Open play list: access the play list.
• Set as: set the file as your ringtone, as a ringtone
for a Phonebook entry, or as an alarm melody.
• Remove: remove the selected file from play list.
• Settings: change the default settings for playing
music files.
Repeat mode: select a repeat mode.
Shuffle: set the music player to play music at
random.
Visualization: change the playback animation.
Volume: select a volume level.
38
Properties: access the file properties.
Function
From the music player screen, press [Up].
Press <Options> to access the following options:
• Play: play the currently selected file.
• Add to list: add files to the play list.
• Change order: move the selected file to the
position you want within the play list.
• Remove: remove the selected file or all files from
the play list.
Voice recorder (Menu 3.2)
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Recording a voice memo
1. Press [
] to start recording.
2. Speak into the microphone.
Press [
] to pause or resume recording.
3. Press <Save> or [Down] to end recording. The
voice memo is saved automatically.
4. Press [
] to review the voice memo, or [Up] to
record a new memo.
Using the voice recorder options
Left
Moves backward in a file.
Moves forward in a file.
Java world (Menu 3.3)
Adjusts the volume.
Use this menu to access the embedded Java games
and downloaded Java applications.
During playback, use the following keys:
Pauses or resumes playback.
Right
/
Down
Stops playback.
Up
Switch to Record mode (
Review mode ( ).
) or
Applications (Menu 3)
Function
1. From the voice recorder screen, press <Options>
and select Go to voice list.
2. Select a voice memo.
Menu functions
Key
From the voice recorder screen, press <Options> to
access the following options:
• Record: record a new voice memo.
• Settings: customise the default settings for the
voice recorder.
Recording time: select a recording time.
Volume: select a volume level.
Default name: change the default prefix for file
names.
• Go to voice list: access the voice list.
Playing a voice memo
Playing a game
Select a game from the game list and follow the
onscreen instructions. The procedure may differ from
game to game.
39
Menu functions
Using Java application options
From the application list, press <Options> to access
the following options:
• Start: launch the selected application.
• Delete: delete the selected application.
• Properties: access the application properties.
• Permission: set permission settings for services
charging you additional costs, such as network
access and SMS.
• Protection: lock the application to protect it from
being deleted, or unlock the application.
• Upgrade: upgrade the application to the latest
version, except for embedded games.
• Send information via SMS: send the URL
containing the application via SMS, except for
embedded games.
• Memory status: access memory information for
applications.
• Network settings: customise a connection profile
to be used for applications requiring network
access. The following options are available:
40
APN: enter the access point name of the network
gateway.
Login ID: enter the user ID.
Password: enter the password.
Proxy: select whether or not the phone uses a
proxy server to launch the web browser.
Proxy settings: customise the following proxy
settings:
When the proxy is set to Enable:
- IP address: enter the gateway address.
- Port: enter the port number.
When the proxy is set to Disable:
- DNS1: enter the primary address.
- DNS2: enter the secondary address.
FM radio (Menu 3.4)
Use this menu to access the FM radio on your phone.
First, you must connect your phone with the headset,
which serves as a radio antenna.
Turning on and listening to the radio
presses by pressing and holding [
].
Setting up a radio station list
1. Connect the headset to the phone and turn on the
radio.
2. Press <Options> and select Add.
Turning off the radio
Applications (Menu 3)
When you listen to the FM radio with the phone
closed, you can lock [ / ] to keep accidental
3. Enter a title for the station you want and press
[Down].
4. Enter the frequency of the station and press
<Save>.
5. Select an empty location.
6. Repeat from step 2 to store other stations.
To listen to the stored stations, press [Up] or
[Down] from the FM Radio screen.
Menu functions
1. Plug the connector of a headset into the jack on
the left side of the phone.
2. From the FM radio screen, press <Options> and
select FM radio on.
3. Press [Left] or [Right] to find the radio station you
want.
You can also press and hold [Left] or [Right] to
scan through available radio stations.
4. To exit the FM radio menu without turning off the
radio, press [ ].
This enables you to access other functions while
listening to the radio.
To turn off the radio, press <Options> from the radio
screen and select FM radio off or disconnect the
headset.
Using radio options
On the FM radio screen, press <Options> to access
the following radio options:
• FM radio on/FM radio off: turn the radio on or
off.
• Add: add a radio station.
• Edit: edit the name or frequency for the station.
41
Menu functions
•
•
•
•
•
Self-tuning: let the phone automatically scan
through and save available radio frequencies.
Remove: remove the selected station or all
stations.
Pop-up alert: set the phone to alert you to listen
to the radio at a specific time. When the pop-up
notification appears on the screen, press <Listen>
to turn on the specified radio station.
Speaker on/Earphone on: change the audio
mode to the phone’s speaker or headset.
Settings: select the radio volume.
Applying daylight savings time
1. From the world map, press <Options> and select
Set daylight saving time.
2. Press [
] to select the time zones you want.
3. Press <Save>.
World time (Menu 3.5)
Alarm (Menu 3.6)
Use this menu to find out what time it is in another
part of the world.
Use this menu to set alarms. The alert type for a
normal alarm corresponds to the call alert type
settings. A wake-up alarm is not affected by your
sound settings.
Viewing world time
1. From the world map, press [Left] or [Right] to
scroll to the city you want on the upper line ( ).
As the time line moves, the time and date of the
given zone displays.
42
2. To set another time zone, press [Down] to move to
the lower line ( ).
3. Press [Left] or [Right] to scroll to the city you
want.
4. Press [
] to save the time zone.
Setting an alarm
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
•
Stopping an alarm
•
•
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm lines.
3. Press <Save>.
From the Alarm screen, select Auto power → On.
If the phone is off when it is time for the alarm to
sound, the phone switches on and sounds the alarm.
Calculator (Menu 3.7)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press <.()> to insert a decimal point or
bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [
] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
Applications (Menu 3)
For a non-wake-up alarm, press any key.
].
For a wake-up alarm, press <OK> or [
Press any key, except <OK> and [
], to cause
it to sound again after 5 minutes. You can do this a
maximum of 5 times.
Setting the alarm to sound even if the phone
is off
Menu functions
Alarm time: enter the time for the alarm to
ring.
• AM/PM: set AM or PM in 12-hour format.
• Alarm day: select the days for the alarm.
• Alarm tone: select an alarm tone.
3. Press <Save>.
43
Menu functions
Converter (Menu 3.8)
Timer (Menu 3.9)
Use this menu for common conversions, such as
currency and temperature.
Use this menu to set a period of time for the phone to
count down. The phone will sound an alarm when the
specified period of time has expired.
Performing a conversion
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
Starting the timer
Using converter options
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [
] to start the stopwatch.
2. Press [
] to check an interval. You can repeat
this step for a total of 4 intervals.
Press <Options> to access the following options:
• Clear: clear the current values.
• Reverse: reverse the conversion.
• Currency rates: edit the currency rate list.
44
1. Press <Set>.
2. Enter the length of time you want to count down
and press <OK>.
3. Press [
] to start counting down.
Stopping the timer
•
•
Press any key when the timer rings.
Press [
] on the Timer screen to stop the timer
before it rings.
Stopwatch (Menu 3.10)
SIM AT (Menu 3.11)
Browser
This menu is available if you use a SIM AT card that
supports SIM Application Toolkit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
From the wireless web, you can access up-to-date
information and a wide variety of media content, such
as games, wallpapers, ringtones, and music files.
(Menu 4)
Menu functions
To access this menu, press <Menu> in Idle mode and
select Browser.
Browser (Menu 4)
Home (Menu 4.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [
] in Idle mode.
Navigating the web browser
To
Press
scroll through browser
items
[Up] or [Down].
select a browser item
[
] or <
>.
45
Menu functions
To
Press
return to the previous
page
<Back> or [C].
return to the homepage
and hold [C].
Using browser menu options
From the web page, press [ ] or select
on the top
of screen.
• Back: go back to the previous page.
• Home: return to the homepage.
• Exit: exit the web browser.
• Reload: reload the current page with updated
information.
• Show URL: display the URL address of the current
web page.
• About...: access version and copyright information
about the browser.
46
Using web page options
From any web page, press [ ] to access the following
options:
• Goto URL: enter a URL address manually.
• Bookmarks: switch to the Bookmarks menu.
• Messages: check the messages stored in the My
Messages folder. You can also create and send a
new SMS message.
• File manager: switch to the File manager menu.
Exiting the browser
Press [ ] to end the network connection and exit the
browser.
Bookmarks (Menu 4.2)
Use this menu to save URL addresses in order to
quickly access web pages.
Adding a bookmark
1. Select an empty location.
2. Enter a title for the bookmark and press [Down].
3. Enter a URL address and press [
].
Profile settings (Menu 4.5)
Selecting a bookmark item launches the web browser
and accesses the associated web page.
Use this menu to set up servers for the web browser.
Contact your service provider for details about your
setting options.
Using bookmark options
Goto URL (Menu 4.3)
Use this menu to manually enter a URL address and
access the associated web page.
Clear cache (Menu 4.4)
Use this menu to clear information stored in the cache,
which is the temporary memory that stores the web
pages you have recently accessed.
For each server, the following options are available:
• Profile name: assign a name to the server profile.
• Home URL: set the address of your homepage.
• Bearer: select a bearer for each type of network
address accessed.
• Proxy: select whether or not the phone uses a
proxy server to launch the web browser.
• GPRS settings: customise the following GPRS
network settings:
When the proxy is set to Enable:
Proxy IP: enter the proxy IP address.
Proxy port: enter the proxy port number.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
Browser (Menu 4)
After saving an item, press <Options> to access the
following options:
• Go: access the bookmarked web page.
• Edit: edit the URL address and title of the
bookmark.
• Delete: delete the selected bookmark or all
bookmarks.
Menu functions
Accessing a bookmarked page
47
Menu functions
•
48
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
APN: enter the access point name of the GPRS
network gateway.
Login ID: enter the user ID.
Password: enter the password.
GSM settings: customise the following GSM
network settings:
When the proxy is set to Enable:
Proxy IP: enter the proxy IP address.
Proxy port: enter the proxy port number.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
Dial number: enter the PPP server phone number.
Login ID: enter the user ID.
Password: enter the password.
Data call type: select a data call type.
Current profile (Menu 4.6)
Use this menu to select a connection profile for
accessing the web browser.
Messages (Menu 5)
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also use push message and cell broadcast
message features.
To access this menu, press <Menu> in Idle mode and
select Messages.
Create new message (Menu 5.1)
Use this menu to create and send messages.
Text message (Menu 5.1.1)
2. Press <Options> to access the following options
for creating a message:
• Send only: just send the message.
• Save and send: save the message in
Sentbox and then send it.
• Insert: add a text template, Phonebook entry,
or bookmark.
• Add picture/Add animation/Add melody:
attach a simple image, animated image, or
melody.
Messages (Menu 5)
The maximum number of characters allowed in a
message varies by service provider. If your
message exceeds the maximum number of
characters, the phone will split the message.
Attach: attach a Phonebook entry as a name
card or calender data as a data format
attachment.
• Save to: save the message in another folder.
• Language select: change the language to be
used in T9 input mode.
• Text style: change the text attributes.
3. When you have finished, press <Options> and
select Save and send or Send only.
4. Enter a destination number.
To send the message to more than one recipient,
fill in additional destination fields.
5. Press [
] to send the message.
Menu functions
Short Message Service (SMS) allows you to send or
receive text messages that may include simple
pictures, animated images, and melodies.
1. Enter your message.
•
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
1. Select the Subject line.
2. Enter the message subject and press [
].
49
Menu functions
3. Select the Picture & Video or Sound line and add
an image, a video, or a sound file.
• The maximum size allowed for a message can
differ, depending on your service provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
4. Select the Message line.
5. Enter the message text and press [
].
6. After adding items, press <Options> to access
the following options for editing the message:
• Edit: edit the subject or text of your message.
• Preview: view the message as it will be shown
on the recipient’s phone.
• Send: send the message.
• Save to: save the message in another
message box.
• Change image/Change video/Change
sound: replace an added item.
• Add page: add pages. Move to each page by
pressing [Left] or [Right].
50
•
•
Delete page: delete an added page.
Edit page: change the duration of page display
or move the page to the next or previous page.
• Attach: attach name cards or calender data as
data format attachments, or a document file
stored in the Other files folder.
• Remove subject/Remove media/Remove
sound/Remove message/Remove: remove
an added item.
7. When you have finished, press <Options> and
select Send.
8. Enter a phone number or e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
9. Press [
] to send the message.
Email (Menu 5.1.3)
You can create and send e-mails that include text,
audio, and images. To use this feature, you need to
subscribe to an e-mail service and set up your e-mail
account and profile.p. 61
1. Select the Subject line.
Enter the subject of your e-mail and press [
].
Select the Message line.
Enter the e-mail text and press [
].
Select the File attach line and select one of the
following options:
• Add image/Add videos/Add sounds/Add
music: add media files stored in the phone’s
memory.
Other files: add document files stored in the
Other files folder.
• Send: send the e-mail.
• Save to: save the e-mail in another message
box.
• Attach: attach name cards or calender data as
data format attachments.
6. After adding items, press <Options> to access
the following options:
• Edit: edit the subject or text.
•
Messages (Menu 5)
Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
View: open the selected file.
Add image/Add videos/Add sounds/Add
music: add media files stored in the phone’s
memory.
• Other files: add document files stored in the
Other files folder.
• Send: send the e-mail.
• Save to: save the e-mail in another message
box.
• Attach: attach name cards or calender data as
data format attachments.
• Remove subject/Remove message: clear
the subject or text.
• Remove: delete the selected attachment or all
attachments.
• Remove all attachments: delete all
attachments.
7. When you have finished, press <Options> and
select Send.
8. Enter an e-mail address.
To send the e-mail to more than one recipient, fill
in additional destination fields.
•
•
Menu functions
2.
3.
4.
5.
51
Menu functions
9. Press [
] to send the e-mail.
My messages (Menu 5.2)
Use this menu to access messages you have received,
sent, saved, or which have failed in sending.
Inbox (Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
Viewing a message
The following icons may appear on the message list to
show the message type:
•
SMS or delivery report for your sent messages
•
MMS
•
MMS notification
•
Push message from web servers.
•
Configuration message, containing network
parameters from your service provider.
52
• Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
• A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
Using message options
While viewing a message, press <Options> to access
the following options:
SMS messages
• Reply via: reply to the sender via SMS or MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
• Add to block list: add the sender’s number to the
Block list to reject the messages from the sender.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
•
•
•
Cut media: save media content from the message
to your phone’s memory.
Properties: access the message properties.
Delivery reports
• Delete: delete the report.
Configuration messages
• Install: apply the configuration specified in the
message to your phone.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Protection: protect the message from being
deleted.
Messages (Menu 5)
MMS messages/MMS notifications
• Retrieve: retrieve the MMS message from the
MMS server.
• Reply via SMS: reply to the sender via SMS.
• Reply via MMS to: reply to the sender or all
recipients via MMS.
• Forward: forward the message to other people.
• Delete: delete the selected message or all
messages.
• Add to block list: add the sender’s number to the
Block list to reject the message from the sender.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
•
Menu functions
•
Cut media: save media content from the message
to your phone’s memory.
Print via Bluetooth: print the message via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Protection: protect the message from being
deleted.
Push messages
• Go to URL: connect to the URL specified in the
message.
• Delete: delete the message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
53
Menu functions
Draft (Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
When you select an SMS or e-mail message, it opens
in Edit mode so that you can edit and/or send the
message.
When you select an MMS message, it opens in Preview
mode as would a message from the Inbox. To edit the
MMS message, press <Options> and select Edit.
Outbox (Menu 5.2.3)
This folder stores messages that the phone is
attempting to send or has failed to send.
The following icons are available to show the message
status:
•
SMS message failed to send
•
MMS message being sent
•
MMS message being retried
•
MMS message failed to send
•
E-mail being sent
•
E-mail failed to send
54
While viewing a message, press <Options> to access
the following options:
• Open file: open the selected file.
• Save file: save the selected file.
• Send again: retry sending the message.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
• Print via Bluetooth: print the message via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
• Protection: protect the message from being
deleted.
• Properties: access the message properties.
Sentbox (Menu 5.2.4)
This folder stores messages that you have sent.
While viewing a message, press <Options> to access
the following options:
•
•
Email box (Menu 5.2.5)
This folder stores e-mails that you have received.
Viewing an e-mail
1. Select an e-mail account.
2. Press <Select> when Check new mail displays,
or press <Options> and select Retrieve. The
phone checks the e-mail server and downloads
new e-mails.
The following icons may appear on the list to show
the e-mail status:
•
Retrieved from the server
•
Being retrieved
•
Failed to retrieve
A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
3. Select an e-mail or a header.
4. Press [ ] or [ ] to view other pages in the
e-mail.
Press and hold [ ] or [ ] to move to the first or
last page in the e-mail.
5. Press [ ] or [ ] to view the previous or next
e-mail.
Messages (Menu 5)
•
Open file: open the selected file.
Save file: save the selected file.
Forward: forward the message to other people.
Delete: delete the message.
Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
Print via Bluetooth: print the message via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Protection: protect the message from being
deleted.
Properties: access the message properties.
Menu functions
•
•
•
•
•
Using e-mail options
While viewing the e-mail or header, press <Options>
to access the following options:
• Retrieve: retrieve the body of the e-mail from the
e-mail server.
• Open file: open the selected file.
55
Menu functions
•
•
•
•
•
•
•
•
•
•
56
Save file: save the selected file.
Reply to: send a reply to the sender and all other
recipients.
Forward: forward the e-mail to other people.
Delete: delete the e-mail.
Add to block list: add the sender’s e-mail
address or subject to the Block list to reject
e-mails from that address or containing that
subject.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the e-mail.
Cut attachment: save the attached files from the
e-mail to your phone’s memory.
Print via Bluetooth: print the e-mail via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Protection: protect the e-mail from being deleted.
Properties: access the e-mail properties.
My folder (Menu 5.2.6)
Use this menu to view the messages you have moved
to this folder using the Move to my folder option
while viewing a message list.
Templates (Menu 5.3)
Use this menu to make and use templates of
frequently used messages or passages.
Text template (Menu 5.3.1)
You can create SMS templates with the sentences you
use frequently so that you can retrieve and insert
them when composing an SMS, MMS, or e-mail
message.
Creating a template
1. Select an empty location.
2. Enter a message and press [
].
Using template options
From the template list, press <Options> to access
the following options:
• Edit: edit the selected template.
•
•
Send message: create and send a new message.
Delete: delete the selected template.
•
Delete: delete the selected template or all
templates, except for the embedded ones.
Use this menu to delete messages in each message
folder all at once.
1. Press [
] to select the message folders to be
cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Creating a template
1. Press <Options> and select Add new.
2. Create a template as you would when creating a
MMS message.
3. Press <Options> and select Save to →
Templates.
Using template options
From the template list, press <Options> to access
the following options:
• View: open the selected template.
• Send message: send the selected message.
• Edit: edit the selected template.
• Add new: add a new template.
Messages (Menu 5)
Delete all (Menu 5.4)
You can access embedded MMS templates or ones you
have saved so that you can use them in composing an
MMS message.
Menu functions
MMS template (Menu 5.3.2)
Settings (Menu 5.5)
Use this menu to set up various options for using the
messaging service.
Text message (Menu 5.5.1)
You can configure SMS settings.
• Send settings: set up the options for sending
SMS messages:
Reply path: allow recipients to reply to you
through your SMS server.
57
Menu functions
•
Delivery report: set the network to inform you
when your messages have been delivered.
Character support: select a character encoding
type. If you select Auto, the phone switches the
encoding type from GSM-alphabet to Unicode if
you enter a Unicode character. Use of Unicode
encoding will reduce the maximum number of
characters in a message to about half. If this menu
is not shown, your phone provides automatic
character encoding by default.
Validity period: set the length of time your
messages are stored in the SMS server.
Message type: set the default message type. The
network can convert the messages into the
selected format.
Service centre: store or change the number of
your SMS server.
Block number: store the phone numbers from
which you want to reject messages.
Multimedia message (Menu 5.5.2)
You can configure MMS settings.
58
•
•
Send settings: set up the options for sending
MMS messages:
Delivery report: set the network to inform you
when your messages have been delivered.
Address hiding: set your address to be hidden
from the recipient’s phone.
Read reply: send a read-reply request along with
your messages.
Priority: set the priority level of messages.
Expiry Date: set the length of time messages are
stored in the MMS server.
Delivery after: set a time delay before messages
are sent.
Receive settings: set up the options for receiving
MMS messages:
Anonymous reject: reject messages from
unknown senders.
Advert allowed: accept advertisements.
Report allowed: set the network to inform the
sender when a message has been delivered to you.
- Server URL: enter the address of your MMS
server.
- Proxy: connect to the GPRS network using the
proxy server.
- GPRS settings: customise the settings required
for connecting to the GPRS network.
when the proxy is set to Enable:
IP address: enter the gateway address.
Port: enter the port number.
APN: enter the access point name used for the
address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
when the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
APN: enter the access point name used for the
address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
Menu functions
Messages (Menu 5)
•
Home reception: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Roaming reception: determine if your phone
retrieves new messages automatically when you
are roaming on another network.
Reception within home network or abroad has the
following options:
- Automatic: the phone automatically retrieves
messages from the server.
- Reject: the phone rejects all messages.
- Manual: the phone displays notifications. Use
the Retrieve option to manually download new
messages.
MMS profiles: configure required network
settings for MMS.
Current profile: select a profile.
Profile settings: customise the options for each
profile:
- Profile name: assign a name to the MMS profile.
59
Menu functions
- Version: select an available OMA version and
maximum size limit for sending or receiving
messages.
- Video rich: you can add any type of items of up
to 300 KB.
Creation mode: select an MMS creation mode.
- Warning: you can create a message with any
type of content and of any size, but the phone
will inform you when the content and size have
exceeded the maximum.
- Free: you can create a message with any type of
contents and of any size.
- Restricted: you can create a message with the
type of content and size specified in Message
class.
Depending on your service provider, it may not
be possible to support the maximum limit
300KB. In this case, try again after changing
the setting to 100KB.
•
•
60
Block number: set the Block number list to reject
MMS messages from specific phone numbers.
Message class: set up the options creating MMS
messages:
Message class: select the type of message
content you will add or the message size.
- Text: you can add only text of up to 30 KB.
- Image basic: you can add any type of item,
except for video, of up to 30 KB.
- Image rich: you can add any type of item,
except for video, of up to 100 KB.
- Video basic: you can add any type of item of up
to 100 KB.
Email (Menu 5.5.3)
You can configure default e-mail settings.
You cannot change e-mail profile and account
settings while an e-mail is being sent or retrieved.
•
Send settings: set up the options for sending
e-mails:
Send copy to self: send a copy of your e-mails to
your e-mail account.
Messages (Menu 5)
•
Retrieve option: set whether the phone
downloads e-mail headers only or e-mail headers
and bodies both.
Delete option: determine whether e-mails are
deleted immediately or the next time you connect
to the server.
Reject if over: determine the maximum size for
incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Leave a copy of messages on the server: leave
copies of e-mails on the e-mail server after
retrieving.
Email account: set up an e-mail account and
select an account to be used.
Current account: select an account.
Account settings: configure e-mail accounts
using different e-mail servers. Press <Options>
and select Create:
- In use: select this option to use the account and
to display the account in the Email box folder.
Menu functions
•
Delivery confirm: set the network to inform you
when your e-mails have been delivered.
Read confirm: send a read-reply request along
with e-mails.
Priority: select the priority level of e-mails.
Include signature: attach your name, phone
number or a simple memo to your e-mails.
Edit name: edit the name in your signature.
Edit telephone number: edit the phone number
in your signature.
Edit note: edit the tag line in your signature.
Receive settings: set up the options for receiving
e-mails:
Check interval: determine how often the phone
checks the server for incoming e-mails. If you
select Not used, use the Check new mail feature
to receive new e-mails manually.
Read reply: determine whether or not the phone
sends a read-reply for incoming e-mails. If you
select Announce, the phone asks you to send a
read-reply.
61
Menu functions
- Account name: enter a name for the currently
selected account.
To access the following options, press [
], or
press <Options> and select Next.
- User name: enter a user name.
- Email address: enter your e-mail address.
- Reply address: enter your e-mail address to be
used when the recipient sends a reply.
To access the following options, press [
], or
press <Options> and select Next.
- Secure connection (SMTP): use a secure
connections for e-mail service.
- SMTP server: enter the IP address or host name
of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- SMTP user ID: enter the SMTP user ID.
- SMTP password: enter the SMTP password.
- Retrieve server type: select the protocol for
the incoming e-mail server. The remaining
options depend on the protocol type setting.
62
When the protocol type is POP3:
- Secure connection (POP3): use a secure
connections for e-mail service.
- POP3 server: enter the IP address or host name
of the server that receives your e-mail.
- POP3 port: enter the POP3 port number.
- Same ID and password: select to use the same
SMTP user ID and password with incoming
server.
- POP3 user ID: enter the POP3 user ID.
- POP3 password: enter the POP3 password.
- APOP login: connect to the server by using the
APOP login scheme.
When the protocol type is IMAP4:
- Secure connection (IMAP4): use a secure
connections for e-mail service.
- IMAP4 server: enter the IP address or host
name of the server that receives your e-mail.
- IMAP4 port: enter the IMAP4 port number.
•
- APN: enter the access point name used for the
GPRS network address.
- Login ID: enter the user ID.
- Password: enter the password.
- DNS1: enter the primary address.
- DNS2: enter the secondary address.
Block list: specify e-mail addresses or subjects
you want to reject.
Menu functions
Push message (Menu 5.5.4)
Messages (Menu 5)
•
- Same ID and password: select to use the same
SMTP user ID and password with incoming
server.
- IMAP4 user ID: enter the IMAP4 user ID.
- IMAP4 password: enter the IMAP4 password.
- Include attachments: select this option to
receive attachments with e-mails.
- Email retrieval limit: set the number of
headers you will retrieve from the server.
When you have finished, press <Options> and
select Save, or press [
].
Email profile: select a connection profile to be
used for e-mail services.
Current profile: select a profile.
Profile settings: configure up to five e-mail
profiles. For each profile, the options are required
to connect to the GPRS network:
- Profile name: enter a name for the e-mail
profile.
You can change the settings for receiving push
messages from the wireless web server.
• Receive: set how your phone receives push
messages.
• Service centre: enter the address of the server
from which you want to receive push messages.
63
Menu functions
Broadcast messages (Menu 5.6)
Memory status (Menu 5.7)
The Cell Broadcast service delivers short messages on
various topics, such as weather, sports, or traffic.
Use this menu to view the amount of memory
currently in use in each folder.
Use this menu to change the settings for the service
and to access broadcast messages.
• Read: open received messages.
The Temporary box saves network messages until
the phone is switched off.
The Archive box saves network messages
indefinitely. Press <Options> and select Save to
save messages to the Archive box when a text
notification appears.
• Receive: enable or disable the reception of
broadcast messages.
• Channel: specify the channels from which you
receive broadcast messages.
When you select Respective channels, you can
set up a list of active CB channels.
• Language: select the languages in which
broadcast messages display.
Please contact your service provider for details.
64
File manager (Menu 6)
The File manager menu allows you to access images,
videos, music files, and sound files stored in the
phone’s memory.
To access this menu, press <Menu> in Idle mode and
select File manager.
As a result of the Digital Rights Management (DRM)
system, some of the media items you download from
the Internet or receive by MMS may require a license
key to access them.
•
This menu displays photos you have taken and images
you have downloaded, received in messages, or
imported from your computer.
•
Viewing an image
1. Select an image folder.
2. Select an image.
Viewing a slide show
Using image options
While viewing an image, press <Options> to access
the following options:
• List: return to the image list.
•
•
•
•
•
•
•
•
File manager (Menu 6)
You can view your photos as a slide show, a sequential
presentation of each photo in the current folder.
1. Select Photos.
2. Press <Options> and select Slide show.
3. Select an interval option. The slide show begins.
4. Press <Cancel> to stop the slide show.
•
Send via: send the file via MMS, e-mail, or
Bluetooth.
Set as: set the image as wallpaper for the displays
or as a caller ID image for a Phonebook entry.
Edit: decorate the photo by adding emoticons or
applying a frame or special effect.
Delete: delete the file.
Rename: change the file name.
Move to favourite images/Move to: move the
file to another folder.
Slide show: view all images as a slide show.
Share for Bluetooth: share the file or all files
with other Bluetooth devices.
Print via Bluetooth: print the image via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Protection: protect the file from being deleted.
Properties: access the file properties.
Menu functions
Images (Menu 6.1)
65
Menu functions
Printing an image
Videos (Menu 6.2)
You can print images via a Bluetooth connection.
This menu displays video clips you have recorded,
downloaded, received in messages, or imported from
your computer.
• Some image formats may not be compatible with
the printer you use.
• Printing settings may vary depending on the
printer you use.
1. Select an image.
2. Press <Options> and select Print via Bluetooth
→ a printing option:
• Image only: print the image only.
• With frame: print the image with image
information, such as file name, time and date,
and file properties.
3. Select a printer. p. 85
4. Press <Print> to print the image.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Playing a video clip
1. Select a video folder.
2. Select a video clip.
During playback, use the following keys:
Key
Left
Moves backward in a file.
Right
Skips forward in a file.
/
Down
66
Function
Pauses or resumes playback.
Adjusts the volume.
Stops playback.
Sounds (Menu 6.4)
After playback, press < > to access the following
options:
• Play: play the file.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Delete: delete the selected file.
• Rename: change the file name.
• Move to favourite videos/Move to: move the
file to another folder.
• Share for Bluetooth: share the file with other
Bluetooth devices.
• Protection: protect the file from being deleted.
• Properties: access the file properties.
This menu displays voice memos you have recorded,
and sound files you have downloaded, received in
messages, or imported from your computer.
This menu displays MP3 files you have downloaded or
imported from your computer.
Select a file. The music player opens.
p. 37
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo, see Voice
recorder. p. 39
Using sound options
File manager (Menu 6)
Music (Menu 6.3)
Menu functions
Using video options
While playing a sound file, press <Options> to access
the following options:
• List: return to the sound list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the file as your ringtone, as a ringtone
for a Phonebook entry, or as a ringtone for alarms.
• Delete: delete the file.
• Rename: change the file name.
67
Menu functions
•
•
•
•
Move to favourite sounds: move the file to
another folder.
Share for Bluetooth: share the file with other
Bluetooth devices.
Protection: protect the file from being deleted.
Properties: access the file properties.
Other files (Menu 6.5)
Files that you have received but which are not
supported by your phone are stored in this folder. You
cannot open these files on the phone. Unsupported file
formats include *.doc, *.ppt, and *.txt.
Memory status (Menu 6.6)
Use this menu to view memory information for media
items in the phone’s memory.
You can also access a media box by selecting it from
this menu.
68
Calendar (Menu 7)
The Calendar menu enables you to keep track of your
schedule.
To access this menu, press <Menu> in Idle mode and
select Calendar.
Consulting the calendar
When you enter the Calendar menu, the calendar in
Month view appears with today’s date indicated by a
blue box.
Selecting a day
•
•
•
Press [Left] or [Right] to move by day.
Press [Up] or [Down] to move by week.
Press [ / ] to move by month.
Using calendar options
Press <Options> to access the following options:
• View mode: change the view mode of the
calendar.p. 71
• Create: add a new item.next section
•
•
•
•
You can store scheduled items, anniversaries,
miscellaneous items, and To do items on the calendar.
More than one item per day can be stored.
Entering a new scheduled item or
miscellaneous item
1. Select a date on the calendar.
2. Press <Options> and select Create → Schedule
or Miscellaneous.
3. Enter information or change the settings:
• Subject: enter a title for the item.
• Details: enter the item details.
Start date and Start time: enter the starting
date and time for the item.
• AM/PM: select AM or PM in 12-hour time
format.
• End date and End time: enter the ending date
and time for the item.
• AM/PM: select AM or PM in 12-hour time
format.
• Location: (for Schedule) enter information
about the item location.
• Alarm: set an alarm for the item.
• before: set how long before the item the alarm
is to alert you.
• Alarm tone: select an alarm tone.
• Repeat: (for Schedule) set the item to recur
and select a repeat unit.
• until: (for Schedule) set the ending date, if
the item will recur.
4. Press <Save> to save the item.
Calendar (Menu 7)
Creating an item
•
Menu functions
•
Go to: select today’s date or enter a specific date.
Sort by: sort items by type of item.
Delete: delete the items stored on the calendar by
using various deleting options.
Missed alarm events: view items whose alarms
you have missed.
Memory status: access memory information for
the items stored on the calendar.
69
Menu functions
70
Entering a new anniversary
Entering a To do item
1. Select a date on the calendar.
2. Press <Options> and select Create →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
• before: set how long before the anniversary
the alarm is to alert you.
• Alarm time: enter the time for the alarm to
ring.
• AM/PM: select AM or PM in 12-hour time
format.
• Alarm tone: select an alarm tone.
• Repeat every year: set the phone to remind
you of the anniversary every year.
4. Press <Save> to save the anniversary.
1. Select a date on the calendar.
2. Press <Options> and select Create → To do.
3. Enter information or change the settings:
• To do: enter information about the To do item.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Priority: select a priority level.
4. Press <Save> to save the To do item.
Viewing an item
Once you have scheduled things, the item icons and
the number of items for a specific day appears at the
bottom of the calendar.
•
Scheduled item
•
Anniversary
•
To do item
•
Miscellaneous item
Accessing an item
1. Select a date on the calendar to display the item
for the day.
2. Select an item to view its details.
3. Press [Left] or [Right] to access the other items
scheduled for the selected day.
Using options
You can change the calendar display to Day view or
Week view. Press <Options> and select View mode
→ a view mode.
Menu functions
Day view
You can view items for the selected date. Select an
item to view its details.
The following icons may display to indicate the item
status:
•
Alarm set
•
Recurring item
•
To do item priority (Red: high, Blue: normal,
Grey: low)
•
Completed To do item
Calendar (Menu 7)
While viewing an item, press <Options> to access
the following options:
• Edit: edit the item.
• Create: add a new item.
• Send via: send the item via SMS, MMS, e-mail, or
Bluetooth.
• View mode: change the view mode of the
calendar.
• Done/Undone: change the status of the to-do
item.
• Delete: delete the item.
• Print via Bluetooth: print the item details via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Viewing an item in a different mode
Week view
You can view items for the selected week. A cell on the
timetable indicates the presence of a schedule item.
Select a cell in the day you want.
71
Menu functions
Camera (Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
To access this menu, press <Menu> in Idle mode and
select Camera, or press and hold [ ].
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
You can take photos in various modes. The camera
produces JPEG photos.
Press
access photo options
<Options>.p. 74
delete the photo
[C] and then <Yes>.
<Back>.
Using camera options in Capture mode
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
Taking a photo with the phone open
72
4. To
return to Capture mode
Taking a photo
1. Access the Camera menu or press and hold [
to turn on the camera.
2. Make any desired adjustments.
• Press < > to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 73
3. Press [ ] to take a photo. The photo is saved in
the Photos folder.
]
In Capture mode, press < > to access the following
options:
• Record video: switch to Record mode.
• Shooting mode: take a photo in the following
modes:
•
•
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Key
Camera (Menu 8)
•
•
•
Brightness sound: turn the sound effect for
brightness adjustment on or off.
Default name: change the default prefix for file
names.
Camera short cuts: view the functions of the
keys you can use in Capture mode.
Menu functions
•
Single shot: take a photo in normal mode. You
can select whether or not the Camera
automatically saves a photo.
Multi shot: take a series of action stills. You can
select the number of photos the camera will take
and the shooting speed.
Effects: change the colour tone or apply a special
effect.
Frames: apply a decorative frame.
Timer: set a time delay before the camera takes a
photo.
Go to photos: access the Photos folder.
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality setting.
View finder: select a preview screen.
Shutter sound: select the sound that you hear
when you press the shutter release, [ ].
Zoom sound: turn the sound effect for zooming
on or off.
Function
Left/Right
Adjusts the image brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
Shows the mirror image.
1
Switches to Record mode.p. 75
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
73
Menu functions
Key
Function
5
Changes the colour tone or applies a
special effect.
7
Selects a decorative frame.
8
Sets the timer.
0
Goes to the Photos folder.
Changes the preview screen.
74
•
•
•
•
•
•
Rename: change the file name.
Go to photos: access the Photos folder.p. 65
Share for Bluetooth: share the selected file or all
files with other Bluetooth devices.
Print via Bluetooth: print the image via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Protection: protect the file from being deleted.
Properties: access the file properties.
Using photo options
Taking a photo with the phone closed
After saving a photo, press <Options> to access the
following options:
• Take another: return to Capture mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the photo as wallpaper for the displays
or as a caller ID image for a Phonebook entry.
• Delete: delete the file.
• Multi shot delete all: delete one of the
multi-shot photos.
If you use Capture mode before exiting the Camera
mode, you can use Capture mode.
1. Press and hold [ ].
2. Make any desired adjustments.
Press [ ] to flip the image vertically.
Press [ ] to show the mirror image.
3. Press [ ] to take a photo. The photo is
automatically saved.
In Record mode, press < > to access the following
options:
• Take a photo: switch to Capture mode.
• Effects: change the colour tone or apply a special
effect.
• Timer: set a time delay before the camera starts
recording.
• Go to videos: access the Videos folder.
• Settings: change the following settings for
recording a video:
Recording mode: select a video recording mode.
Select Normal to record a video within the limit of
the currently available memory.
Select Limit of MMS to record a video suitable for
MMS messages.
Select Limit of Email to record a video suitable
for e-mails.
Size: select a frame size.
Quality: select an image quality setting.
Audio rec.: record audio with a video clip.
Recording a video with the phone open
1. In Capture mode, press [1].
2. Make any desired adjustment.
• Press < > to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 76
] to start recording.
3. Press [ ] or [
4. Press [ ] or < > to stop recording. The video is
automatically saved in the Videos folder.
5. To
Press
play back the video clip
[
access video options
<
].
delete the video clip
[C] and then <Yes>.
return to Record mode
<
>.p. 76
>.
Camera (Menu 8)
Using camera options in Record mode
You can record a video of what is displayed on the
camera screen and save it.
Menu functions
Recording a video
75
Menu functions
•
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
Default name: change the default prefix of file
names.
Camcorder short cuts: view the functions of the
keys you can use in Record mode.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode:
Key
Function
Left/Right
Adjusts the image brightness.
Up/Down
Zooms in or out.
Flips the image vertically.
Shows the mirror image.
1
76
Switches to Capture mode.p. 72
Key
Function
2
Changes the frame size.
3
Changes the image quality.
4
Changes the video recording mode.
5
Changes the colour tone or applies a
special effect.
7
Mutes or unmutes audio.
8
Sets the timer.
0
Goes to the Videos folder.
Using video options
After saving a video clip, press < > to access the
following options:
• Record another: return to Record mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Delete: delete the file.
•
•
•
Recording a video with the phone closed
The Settings menu provides you with various setting
options to customise the phone to your preferences
and needs. You can also reset the settings to their
default status.
To access this menu, press <Menu> in Idle mode and
select Settings.
Time & Date (Menu 9.1)
Use this menu to set the current time and date on
your phone.
• Time: enter the current time.
• Home zone: press [
] and set the home time
zone. Select the city that corresponds to your
home zone. To set the daylight saving time, select
Set daylight saving time.
• AM/PM: select AM or PM in 12-hour time format.
• Time format: select the time format.
• Set date: enter the current date.
• Date format: select the date format.
Settings (Menu 9)
If you use Record mode before exiting the Camera
mode, you can use Record mode.
1. Press and hold [ ].
2. Make any desired adjustments.
Press [ ] to flip the image vertically.
Press [ ] to show the mirror image.
3. Press [ ] to record a video. The video clip is
automatically saved.
Settings (Menu 9)
Menu functions
•
•
Rename: change the file name.
Go to videos: access the Videos folder.p. 66
Share for Bluetooth: share the file with other
Bluetooth devices
Protection: protect the file from being deleted.
Properties: access the file properties.
77
Menu functions
•
Week start day: set which day of the week the
calendar starts with.
Phone settings (Menu 9.2)
Many different features of your phone’s system can be
customised to suit your preferences.
Language (Menu 9.2.1)
Use this menu to select one of several languages for
the display text.
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Short cut (Menu 9.2.3)
You can use the Navigation keys as shortcuts to access
specific menus directly from Idle mode. Use this menu
to assign a shortcut to a key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select the menu to be assigned to the key.
78
Using shortcut options
Press <Options> to access the following options:
• Change: assign or change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut assignments.
Advanced shortcut (Menu 9.2.4)
Use this menu to activate the Advanced shortcut
feature. You can quickly access the text message,
alarm, calendar, and converter applications from the
dialling screen.
Activating the Advanced shortcut feature
1. From the Advanced screen, select On.
2. Press <Save>.
Changing an Advanced shortcut key
1. Select the key to be changed as a shortcut key.
2. Select the menu that will be assigned to the key.
Using Advanced shortcut options
Press <Options> to access the following options:
•
•
Volume key (Menu 9.2.5)
Use this menu to set whether the phone mutes the call
ringer or rejects a call if you press and hold [ / ]
when a call comes in.
You can turn the automatic redialling or answering
feature on or off.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
• Anykey answer: answer an incoming call by
pressing any key, except [ ] and <Reject>.
• Voice clarity: remove extraneous noise and
increase call quality so that the person with whom
you are speaking can hear you clearly even if you
are in a noisy place.
Active folder: answer an incoming call by opening
the phone.
Display settings (Menu 9.3)
Use this menu to change settings for the display.
Wallpaper (Menu 9.3.1)
You can set up the idle screen on both displays.
• Main display: select an image to be displayed on
the main display.
• Cover display: change the settings for the
external display:
Clock: select a clock type.
Cover title: set a message to be displayed on the
external display.
Wallpaper images: change the wallpaper image
for the external display.
Settings (Menu 9)
Extra settings (Menu 9.2.6)
•
Menu functions
•
Change: assign or change a shortcut menu.
Remove: deactivate the shortcut assignment to
the selected key.
Remove all: deactivate all shortcut assignments.
Text display (Menu 9.3.2)
Use this menu to change the display settings for the
text displayed on the idle screen.
79
Menu functions
•
•
•
Text position: select a text position. If you don’t
want to display text in Idle mode, select Off.
Text style: select a font style.
Text colour: select a font colour.
Dialling display (Menu 9.3.3)
Use this menu to select a font colour and size for the
numbers entered and the background colour of the
display while dialling.
Calendar (Menu 9.3.4)
Use this menu to display the calendar of the current
month on the idle screen.
You can adjust the contrast of the brightness for the
main display and external display. Adjust this setting
with the display brightness to see the display clearly in
different lighting conditions.
Show caller information (Menu 9.3.8)
Use this menu to set the phone to display missed call
notifications with the most recently missed caller’s
information. To set the external display to show caller
information, select With cover display.
Sound settings (Menu 9.4)
Skin (Menu 9.3.5)
Use this menu to customise various sound settings.
You can select a skin colour pattern for Menu mode.
Incoming call (Menu 9.4.1)
LCD brightness (Menu 9.3.6)
Use this menu to change the sound settings for
incoming calls.
• Alert type: specify how you are to be informed of
incoming calls.
• Ring tone: select a ringtone to be used for the call
ringer.
You can adjust the brightness of the display for
varying lighting conditions.
80
LCD contrast (Menu 9.3.7)
•
Volume: select a ringtone volume.
Keypad tone (Menu 9.4.2)
You can adjust the keypad tone volume using
[ / ] in Idle mode.
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Quiet mode (Menu 9.4.6)
Use this menu to set how the phone acts to alert you
to a specific event while in Quiet mode.
Extra tones (Menu 9.4.7)
Use this menu to change the sound settings for
incoming messages.
• Tone: select one of several message tones.
• Alert type: specify how you are to be informed
when a message comes in.
• Repetition: specify how often the phone informs
you of a new message.
Use this menu to customise additional tones for the
phone.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
• Connection tone: set the phone to beep when an
outgoing call connects to the system.
• Alerts on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
• Indicative tones: set the phone to beep when a
pop-up window displays.
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Settings (Menu 9)
Message tone (Menu 9.4.3)
Power on/off (Menu 9.4.4)
Menu functions
Use this menu to select the tone that the phone
sounds when you press a key.
Folder tone (Menu 9.4.5)
81
Menu functions
Light settings (Menu 9.5)
Network services (Menu 9.6)
Use this menu to change settings for the light.
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
Backlight (Menu 9.5.1)
You can change the length of time the backlight or
display stays on in Dim mode.
• Main LCD on: select the length of time the
backlight stays on.
• Main LCD dim: select the length of time the
display stays on in Dim mode after the backlight
turns off.
Keypad light (Menu 9.5.2)
You can set how the phone controls the use of the
keypad light.
• Use at any time: the keypad light is always used.
• Use at night time: the keypad light is used only
between 5:00 PM and 9:00 AM.
• Use at custom time: specify the time period that
the keypad light is used.
82
Call diverting (Menu 9.6.1)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
• Busy: divert calls when you are on another
call.
• No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
• Cancel all: cancel all call diverting options.
2. Select the type of calls to be diverted.
3. Select Activate. To deactivate call diverting, select
Deactivate.
Call barring (Menu 9.6.2)
Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Deactivate.
4. Enter the call barring password supplied by your
service provider and press <Select>.
Call waiting (Menu 9.6.3)
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which call waiting option
will apply.
2. Select Activate. To deactivate call waiting, select
Deactivate.
Settings (Menu 9)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing: prohibit all outgoing calls.
• International: prohibit international calls.
• International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home country.
• All incoming: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
•
Menu functions
4. Move to the Divert to line.
5. Enter the number to which calls are to be diverted.
6. If you selected No reply, move to the Seconds
line and select the length of time the network
delays before diverting a call.
7. Press <Select>.
83
Menu functions
Network selection (Menu 9.6.4)
This network service allows you to manually select the
network to be used while roaming outside of your
home area, or to let the network be chosen
automatically.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
Caller ID (Menu 9.6.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. If you select Default, the phone
will use the default setting provided by the network.
Some networks may not allow you to change this
setting.
Voice mail server (Menu 9.6.6)
Use this menu to store the number of the voicemail
server and access your voicemails.
You must store the voicemail server number before
accessing the server. Your service provider can give
you the number.
84
•
•
Connect to voice mail: connect to the voicemail
server to listen to your messages.
Voice server number: enter the voicemail server
number.
Band selection (Menu 9.6.7)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900, Combined GSM 900/1800, and GSM 900/
1800/1900.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you may need to change to an
appropriate band.
Bluetooth (Menu 9.7)
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
Setting up the Bluetooth feature
The Bluetooth menu provides the following options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices.
• My phone’s visibility: allow other Bluetooth
devices to search for your phone.
•
•
My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
Bluetooth services: display available Bluetooth
services.
Searching for and pairing with a Bluetooth
device
Settings (Menu 9)
• If there are obstacles between the devices, the
operating distance may be reduced.
• It is recommended that you don’t use the
Bluetooth feature while using multimedia features,
such as voice recorder, camera, and music player,
or vice versa, for better performance.
• Some devices may not be compatible with your
phone.
•
Menu functions
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 meters. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
1. From the Bluetooth setting options, select My
devices.
2. Select Search new device.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
type of device:
•
Computer •
Mobile phone
•
Printer
•
Unknown device
•
PDA
•
Headset/Hands-free car kit
85
Menu functions
The colour of the icon indicates the status of the
the device:
• Grey for unpaired devices
• Blue for paired devices
• Red for devices that are currently connected to
your phone
3. Select a device.
4. Enter a Bluetooth PIN and press <OK>. This code
is used just once and you don’t need to memorise
it.
When the owner of the other device enters the
same code, pairing is complete.
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as 0000.
If the other device has a code, you must enter it.
Using device options
From the device list, press <Options> to access the
following options:
• Connect: connect to a headset or hands-free car
kit.
86
•
•
•
•
•
•
Disconnect: end the connection with the
connected device.
Browse files: search for data from the device and
import data directly to your phone.
Service list: access the Bluetooth service list of
the device.
Rename: rename the paired device.
Authorize device/Unauthorize device:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
Delete: remove the selected device or all devices
from the list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press <Options>.
4. Select Send via → Bluetooth.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active.
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Change PIN (Menu 9.8.2)
If an unauthorised Bluetooth device sends data to your
phone, the phone displays a confirmation message. To
receive data, press <Yes>.
Use this menu to change your PIN. The PIN check
feature must be enabled to change the PIN.
Security (Menu 9.8)
Use this menu to lock the phone from unauthorised
use.
If you enter an incorrect PIN/PIN2 three times in
succession, the SIM card is blocked. To unblock it,
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
service provider.
Phone lock (Menu 9.8.3)
Settings (Menu 9)
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
Menu functions
Receiving data via Bluetooth
PIN check (Menu 9.8.1)
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.8.4)
Use this menu to change your phone password.
87
Privacy (Menu 9.8.5)
Memory status (Menu 9.9)
Use this menu to lock access to your media contents,
including messages, media files, and files stored in the
Other files folder. When a privacy option is enabled,
you must enter the phone password to access the
locked items.
Use this menu to check the amount of memory being
used for storing data in Messages, File manager,
Calendar, Phonebook, and JAVA world. You can also
check the shared memory for MMS, Email, and File
manager.
SIM lock (Menu 9.8.6)
This menu allows your phone to work only with the
current SIM by assigning a SIM lock code. You must
enter the SIM lock code to use a different SIM card.
FDN mode (Menu 9.8.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Change PIN2 (Menu 9.8.8)
If supported by your SIM card, use this menu to
change your current PIN2.
88
Reset settings (Menu 9.10)
Use this menu to reset the phone’s settings you have
changed.
1. Press [
] to select the setting categories to be
reset.
2. Press <Reset>.
3. Press <Yes> to confirm the reset.
4. Enter the phone password and press <OK>.
The password is preset to 00000000. You can
change this password.p. 87
VOD settings (Menu 9.11)
Use this menu to select a connection profile to be used
for accessing a video streaming server. This menu may
not be shown depending on your service provider.
For each profile, you can access the following options:
• Profile name: assign a name to the profile.
• APN: enter the access point name of the GPRS
network gateway.
• Login ID: enter the user ID.
• Password: enter the password.
Solve problems
Help and personal needs
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly installed.
“Enter password”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
89
Solve problems
“Enter PUK”
• The PIN has been entered incorrectly three times
in succession, and the SIM card is now blocked.
Enter the PUK supplied by your service provider.
•
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
You have entered a number but it was not dialled
• Be sure that you have pressed [
].
• Be sure you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([
pressed for more than one second.)
90
]
•
Be sure that you are accessing the correct cellular
network.
Be sure that you have not set an incoming call
barring option.
The phone starts beeping and “Low battery”
flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you re-call a
Phonebook entry
• Use the Contact list menu to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
The battery doesn’t charge properly or the phone
sometimes turns itself off
• Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the limits for
exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines
were developed by independent scientific organisations
through the periodic and thorough evaluation of scientific
studies. The limits include a substantial safety margin
designed to ensure the safety of all persons, regardless of
age and health.
The exposure standard for mobile phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the EU Council is 2.0 W/
kg.*
The highest SAR value for this model phone was 0.848 W/
kg.
91
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health and
safety of the user and any other person.
Precautions when using batteries
•
•
•
•
•
•
* The SAR limit for mobile phones used by the public is 2.0 watts/
kilogram (W/kg) averaged over ten grams of body tissue. The limit
incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements. The SAR values may vary, depending on national
reporting requirements and the network band.
92
Never use a charger or battery that is damaged in any
way.
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power. Talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time is noticeably shorter than normal, it
is time to buy a new battery.
If left unused, a fully charged battery will discharge
itself over time.
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when it
is not in use. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
•
•
•
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
Health and safety information
•
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
Do not leave the battery in hot or cold places because
the capacity and lifetime of the battery will be
reduced. Try to keep the battery at room temperature.
A phone with a hot or cold battery may not work
temporarily, even when the battery is fully charged.
Li-ion batteries are particularly affected by
temperatures below 0°C (32°F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a coin,
clip or pen causes a direct connection between the +
and – terminals of the battery (metal strips on the
battery). For example, do not carry a spare battery in
a pocket or bag where the battery may contact metal
objects. Short-circuiting the terminals may damage
the battery or the object causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
When you are driving a car, driving is your first
responsibility. When using your wireless phone while
driving, follow local regulations in the country or region
you are in.
Operating environment
Remember to follow any special regulations in force in the
area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
93
Health and safety information
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Electronic devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research. If you
have any reason to suspect that interference is taking
place, switch off your phone immediately.
94
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Other medical devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Your physician may be able to assist you in obtaining this
information.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Emergency calls
Switch off your phone in any facility where posted notices
require you to do so.
This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as userprogrammed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
Potentially explosive environments
Switch off your phone when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains chemicals
or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Health and safety information
Posted facilities
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [
].
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
95
Health and safety information
Other important safety information
Care and maintenance
•
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
•
•
•
•
•
96
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air bag
inflates.
Switch off your phone before boarding an aircraft. It is
dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the operation
of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
•
•
•
•
•
Keep your phone and all its parts and accessories out
of the reach of small children and pets. They may
inadvertently damage these things or choke on small
parts.
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
•
•
•
•
•
•
•
•
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
Health and safety information
•
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, stove, or radiator. The phone may
explode when overheated.
When the phone or battery gets wet, the label
indicating water damage inside the phone changes
colour. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even if
the warranty for your phone has not expired.
If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may cause
damage to their eyes.
97
Index
A
ABC mode, text input • 24
Active folder • 79
Alarm • 42
Answering
call • 27
second call • 29
Anykey answer • 79
Auto redial • 79
B
Background image • 79
Backlight time, set
display • 82
keypad • 82
Band selection • 84
Barring, calls • 83
Battery
charging • 7
low indicator • 8
precautions • 92
Bluetooth
receiving, data • 87
sending, data • 86
settings • 85
98
Broadcast messages • 64
Browser, web • 45
C
Calculator • 43
Calendar • 68
Call cost • 32
Call log
dialled • 31
missed • 31
received • 31
Call time • 31
Caller ID • 80, 84
Calls
answering • 27
barring • 83
diverting • 82
holding • 28
redialling • 26
rejecting • 27
transferring • 30
waiting • 83
Camera
photos • 72
videos • 75
CB (Cell Broadcast) messages •
64
Characters, enter • 24
Configuration messages • 52
Connection tone • 81
Converter • 44
Creating messages
e-mail • 50
MMS • 49
SMS • 49
D
Deleting
call log • 31
e-mail • 55, 56, 57
events • 71
MMS • 53, 55, 57
phonebook • 33, 36
SMS • 52, 55, 57
Dialled calls • 31
Dialling display, set • 80
Display
backlight, set • 82
brightness • 80
icons • 10
language • 78
layout • 10
settings • 79
Diverting, calls • 82
DRM (Digital Rights
Management) • 64
DTMF tones, send • 29
E
E-mails
creating/sending • 50
deleting • 56
setting • 60
viewing • 55
Emergency calls • 95
F
FDN (Fixed Dialling Number)
mode • 88
File manager • 64
FM radio • 40
Folder tone • 81
G
Games • 39
Greeting message • 78
H
Health and safety • 91
Holding, call • 28
I
J
Java applications • 39
K
Keypad tones
selecting • 81
sending/muting • 29
volume • 81
L
Language, select • 78
Last number, redial • 26
Light settings • 82
Locking
menu functions • 88
phone • 87
SIM card • 88
Memory status
downloaded items • 68
file manager • 68
messages • 64
phonebook 36
shared memory • 88
Message tone • 81
Messages
cell broadcast • 64
configuration • 53
e-mail • 50, 55
greeting • 78
MMS • 49, 53
push • 53, 63
SMS • 49, 52
Minute minder • 81
Missed calls • 31
MMS messages
creating/sending • 49
deleting • 53
setting • 58
viewing • 52
MP3 player • 37
Multiparty-call • 30
Music, downloaded • 67
N
Name card • 35
Names
entering • 24
searching • 32
Network band, select • 84
Network selection • 84
Network services • 82
Numbers
searching • 32
storing • 33
O
Outbox, messages • 54
P
Password
call barring • 83
phone • 87
Phone
care and maintenance •
96
display • 10
icons • 10
locking • 87
password • 87
resetting • 88
switching on/off • 8
unpacking • 6
Phonebook
adding • 33
deleting • 33, 36
finding • 32
managing • 36
options • 32
speed dialling • 35
Photos
printing • 66
taking • 72
viewing • 65
PIN, change • 87
PIN2, change • 88
Power on/off tone • 81
Privacy • 88
Problems, solve • 89
Push messages • 53, 63
Index
Icons, description • 10
Images, downloaded • 65
Inbox, messages
e-mail • 55
MMS/SMS • 52
International calls • 26
Internet • 45
Low battery indicator • 8
M
Q
Quiet mode
entering • 14
setting • 81
R
Received calls • 31
Received messages
e-mail • 55
MMS/SMS • 52
99
Index
Recording
videos • 75
voice memos • 38
Redialling
automatically • 79
manually • 26
Resetting phone • 88
Ringer
incoming calls • 80
messages • 81
Road safety • 93
Roaming • 84
S
100
Safety
information • 91
precautions • 1
Security, calls • 87
Sent messages • 54
Shortcut • 78
SIM card
inserting • 7
locking • 88
Skin colour • 80
SMS messages
creating/sending • 49
deleting • 52
setting • 57
viewing • 52
Sound settings • 80
Sounds, downloaded • 67
Speed dial • 35
Stopwatch • 44
Switching on/off
microphone • 29
phone • 8
T
T9 mode, text input • 25
Templates, message • 56
Text, enter • 24
Timer • 44
V
Videos
playing • 66
recording • 75
Voice recorder
playing • 39
recording • 38
Voicemail server • 84
W
Waiting call • 83
Wallpaper • 79
Web browser
access • 45
bookmarks • 46
World time • 42
Declaration of Conformity (R&TTE)
For the following product :
GSM900/GSM1800/GSM1900 with Bluetooth
Portable Cellular Telephone
(Product description)
SGH-X670
(Model name)
Manufactured at :
‫ ڈ‬Samsung Electronics Co., Ltd, 94-1, Imsoo-Dong, Gumi City, Kyung-Buk, Korea,
730-350
(factory name, address)
to which this declaration relates, is in conformity with the following standards and/or other normative
documents.
Safety
: EN 60950-1:2001
EMC
: EN 301 489-01 v1.4.1 (08-2002)
EN 301 489-07 v1.2.1 (08-2002)
EN 301 489-17 v1.2.1 (08-2002)
SAR
: EN 50360:2001
EN 50361:2001
Network
: EN 301 511 v9.0.2 (03-2003)
EN 300 328 v1.6.1 (11-2004)
We hereby declare that [all essential radio test suites have been carried out and that] the above named
product is in conformity to all the essential requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in Annex[ญ] of Directive
1999/5/EC has been followed with the involvement of the following Notified Body(ies):
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark:
0168
The technical documentation kept at :
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park,Saxony Way,
Yateley, Hampshire,GU46 6GG, UK
2006.02.13
(place and date of issue)
Yong-Sang Park / S. Manager
(name and signature of authorized person)
ଖ It is not the address of Samsung Service Centre. For the address or the phone number of Samsung
Service Centre, see the warranty card or contact the retailer where you purchased your phone.
* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-09435A
English (EU). 03/2006. Rev. 1.1
Download PDF