Samsung | SGH-X820 | Samsung SGH-X820 User Manual

* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.:GH68-10937A
English (EU). 05/2006. Rev. 1.0
SGH-X820
User’s Guide
Drive safely at all times
Do not use a hand-held phone while driving. Park the
vehicle first.
Important
safety
precautions
Failure to comply with the following
precautions may be dangerous or illegal.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them in
an aircraft is both illegal and dangerous.
Switch off the phone near all medical equipment
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables. Use
of any unauthorised accessories could damage you or
your phone and may be dangerous.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Important safety precautions
Be aware of special regulations
• The phone could explode if the battery is replaced
with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
At very high volumes, prolonged listening to a
headset can damage your hearing.
Emergency calls
Key in the emergency number for your present
location, then press
.
Qualified service
Keep your phone away from small children
Only qualified service personnel may repair your
phone.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
For more detailed safety information, see "Health and
safety information" on page 96.
1
About this Guide
•
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
In this guide, the following instruction icons appear:
Indicates that you need to pay careful attention
to the subsequent information regarding safety or
phone features.
Indicates that you can get more information on
the referenced page.
→
Indicates that you need to press the Navigation
keys to scroll to the specified option and then
select it.
[
]
< >
2
Indicates a key on the phone. For example, [
].
Indicates a soft key, whose function is displayed
on the phone screen. For example, <Menu>
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
Special features of your phone
•
Music player
Play music files using your phone as
a music player.
•
Bluetooth
Transfer media files and personal
data and connect to other devices
using free, wireless Bluetooth
technology.
Photo printing
Print your photos to preserve your
best moments forever.
•
Phone to TV
View photos and video clips
captured with the phone on your TV
screen.
•
Image editor
Crop, resize, rotate, and decorate
your photos.
•
File viewer
Open documents in various formats
on the phone without corruption.
•
Web browser
Access the wireless web to get upto-the-minute information and a
wide variety of media content.
•
Java
Enjoy Java™-based embedded
games and download new games.
•
Offline mode
Switch your phone to offline to use its
non-wireless functions in an airplane.
•
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, image, video, and audio.
•
E-mail
Send and receive e-mails with image, video, and
audio attachments.
Special features of your phone
•
3
Contents
Unpack
6
Make sure you have each item
Your phone
6
Get started
7
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Enter text
Call functions
. 7
. 8
. 9
12
13
15
Menu functions
15
Health and safety information
Begin with your camera, the music player, the web browser,
and other special features
Use the camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Play music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
18
18
20
21
22
24
25
27
Advanced calling features
First steps to operating your phone
Step outside the phone
.
.
.
.
.
.
AB, T9, Number, and Symbol modes
Keys, features, and locations
Install and charge the phone
Power on or off. . . . . . . . . .
Keys and display. . . . . . . . .
Access menu functions . . . .
Customise your phone. . . . .
Make/Answer calls . . . . . . .
Browse the web . . . . . . . . . . . .
Use Phonebook . . . . . . . . . . . . .
Send messages . . . . . . . . . . . . .
View messages . . . . . . . . . . . . .
Use Bluetooth . . . . . . . . . . . . . .
Watch the phone display on a TV
31
All menu options listed
Solve problems
94
Help and personal needs
Index
96
103
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
1 Call log
p. 31
3 Applications
p. 38
5 Messages
p. 51
1
2
3
4
5
6
7
p. 31
p. 32
p. 32
p. 32
p. 32
p. 32
p. 33
1 Music player
2 Voice recorder
3 Image editor
4 Java world
5 World clock
6 Alarm
7 Calculator
8 Converter
9 Timer
10 Stopwatch
11 Key management
12 SIM AT*
p. 38
p. 41
p. 42
p. 44
p. 44
p. 45
p. 46
p. 46
p. 47
p. 47
p. 47
p. 47
1
2
3
4
5
6
p. 51
p. 55
p. 60
p. 60
p. 61
p. 66
4 Browser
p. 48
Recent contacts
Missed calls
Dialled calls
Received calls
Delete all
Call time
Call costs*
2 Phonebook
p. 33
1
2
3
4
5
6
7
8
p. 33
p. 34
p. 35
p. 36
p. 36
p. 37
p. 37
p. 37
Contact list
Create contact
Group
Speed dial
My namecard
Own number
Management
Service number*
1
2
3
4
5
6
7
8
Home
p.
Enter URL
p.
Bookmarks
p.
Saved pages
p.
History
p.
Clear cache
p.
Browser settings
p.
Streaming settings**p.
48
49
49
50
50
50
51
51
Create message
My messages
Templates
Delete all
Settings
Memory status
6 My files
p. 66
1
2
3
4
5
6
p. 67
p. 68
p. 69
p. 69
p. 70
p. 72
Images
Videos
Music
Sounds
Other files
Memory status
7 Calendar
p. 72
8 Camera
p. 76
9 Settings
p. 82
1 Time and date
2 Phone settings
3 Display settings
4 Sound settings
5 Light settings
6 Network services
7 Bluetooth
8 Security
9 Connection settings
10 Reset settings
p. 82
p. 82
p. 83
p. 84
p. 85
p. 86
p. 89
p. 91
p. 93
p. 94
* Shows only if supported by your
SIM card.
**Shows only if supported by your
service provider.
5
Unpack
Your phone
Make sure you have each item
Keys, features, and locations
Camera lens
Earpiece
Phone
Travel Adapter
Headset/
Adapter jack
Camera key
Volume keys
Display
Battery
User’s Guide
You can obtain various accessories from
your local Samsung dealer.
The items supplied with your phone and
the accessories available at your
Samsung dealer may vary, depending on
your country or service provider.
6
Web access/
Confirm key
Navigation keys
(Up/Down/Left/
Right)
Left soft key
Right soft key
Dial key
Power on/off/
Menu exit key
Alphanumeric
keys
Delete key
Special
function keys
Microphone
Get started
Install the battery.
Reattach the cover.
First steps to operating your phone
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Remove the battery
cover.
Plug the travel adapter into the phone.
Insert the SIM card.
Plug the adapter into a standard AC wall outlet.
If the phone is already on,
first turn it off by pressing
and holding [
].
Make sure that the goldcoloured contacts on the
card are face down.
7
Get started
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
Remove the adapter from the phone.
Power on or off
Switch on
1. Press and hold [
Do not turn on
the phone when
mobile phone
use is prohibited.
2. If necessary, enter the PIN and
press <OK>.
Switch off
Press and hold [
].
].
Keypad lock
Low battery indicator
When the battery is low:
• a warning tone sounds,
• the low battery message displays, and
• the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
You can lock the keypad to prevent accidental presses
from affecting phone operations.
In Idle mode, press and hold [ ] and press <Yes>.
To unlock the keypad, press the left soft key and then
[ ].
You can also set the phone to lock the keypad
automatically. p. 83
Offline mode
To switch to Offline mode, press <Menu> and select
Settings → Phone settings → Offline mode → On.
In Offline mode, you can use non-wireless functions,
such as games, calendar, camera, and music player.
Keys and display
Keys
Perform the function indicated on the
bottom line of the display.
Get started
You can switch the phone to Offline mode, in which the
phone functions requiring network connection are
deactivated. This mode is helpful when you want to
use your phone in a place where you are not allowed
to use mobile devices, such as in an airplane and at a
hospital.
In Idle mode, access your favourite
menus directly.p. 82
In Menu mode, scroll through menu
options.
In Idle mode, launch the web browser.
In Menu mode, select the highlighted
menu option or confirm input.
Make or answer a call.
In Idle mode, retrieve numbers recently
dialled, missed, or received.
Delete characters from the display and
selected items in an application.
9
Get started
Press and hold to switch the phone on or
off.
End a call.
In Menu mode, cancel input and return
the phone to Idle mode.
Enter numbers, letters, and some special
characters.
In Idle mode, press and hold [1] to
access your voicemail server. Press and
hold [0] to enter an international call
prefix.
Enter special characters.
In Idle mode, press and hold [ ] to
activate or deactivate Silent mode. Press
and hold [ ] to lock the keypad.
In Idle mode, press and hold to turn on
the camera.
In camera mode, take a photo or record a
video.
10
Adjust the phone volume.
In Idle mode, adjust the key tone
volume.
Display
Layout
Icons
display various icons.
Text and graphics
display messages,
instructions, and
information you enter.
Menu
Icons*
Contacts
Soft key function
indicators
show the current functions
assigned to the soft keys.
Received signal strength
GPRS network
Connecting to GPRS network
Transferring data in GPRS
network
Icons
EDGE network
Connecting to EDGE network
Keys lockedp. 83
Call in progress
Connected to Bluetooth
hands-free car kit or headset
Out of your service area; you
cannot make or receive calls
Synchronised with PC
Connected to Internet
MP3 playback in progress
Roaming network
MP3 playback paused
New message
New e-mail
New voicemail
Call diverting feature active
p. 87
Home Zone, if registered for the
appropriate service
Get started
Transferring data in EDGE
network
Office Zone, if registered for the
appropriate service
Bluetooth activep. 89
Alarm setp. 45
Silent mode (Vibration)
Silent mode (Mute)
Mute mode, during a call
Battery power level
* Depending on your country or service provider, the
icons shown on the display may vary.
11
Get started
Access menu functions
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current role.
Select
Press the left
soft key to select
the highlighted
option.
Select an
option
2. Press the Navigation keys to
move to the next or previous
option.
3. Press <Select> or [ ] to
confirm the function displayed
or option highlighted.
Back
4. To exit, choose either of the
following methods.
• Press <Back> to move up
one level.
• Press [ ] to return to Idle
mode.
Press the right
soft key to return
to the previous
menu level.
Use shortcuts
12
1. Press a desired soft key.
Press the number key
corresponding to the option you
want. For the menu numbers 10,
11, and 12, press [0], [ ], and [ ]
respectively.
Customise your phone
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Language.
2. Select a language.
Call ringer
melody
You can set wallpaper for the idle
screen on the display.
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Wallpaper →
Wallpaper image.
1. In Idle mode, press <Menu>
and select Settings → Sound
settings → Incoming call →
Ringtone.
2. Select an image or a video
category.
2. Select a ringtone category.
5. Press <Save>.
3. Select an image or a video.
4. Press <Select>.
3. Select a ringtone.
4. Press <Save>.
Get started
Display
language
Idle mode
wallpaper
Menu mode
skin colour
You can change the colour for the
display components, such as title
bars and highlight bars.
1. In Idle mode, press <Menu>
and select Settings → Display
settings → Skin.
2. Select a colour pattern.
13
Get started
Menu
shortcuts
You can set the Navigation keys to
function as shortcuts to access
your favourite menus.
1. In Idle mode, press <Menu>
and select Settings → Phone
settings → Shortcuts.
2. Select a key.
3. Select a menu to be assigned to
the key.
Silent mode
You can switch the phone to Silent
mode to avoid disturbing other
people.
Press and hold [ ] in Idle mode.
Phone lock
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on power-up.
1. In Idle mode, press <Menu>
and select Settings →
Security → Change
password.
2. Enter the default password,
00000000, and press <OK>.
3. Enter a new 4- to 8-digit
password and press <OK>.
4. Enter the new password again
and press <OK>.
5. Select Phone lock.
6. Select Enable.
7. Enter the password and press
<OK>.
14
Make/Answer calls
Make a call
Step outside the phone
1. In Idle mode, enter an area
code and a phone number.
2. Press [
].
3. To end the call, press [
Answer a call
1. When the phone rings, press
[ ].
2. To end the call, press [
Adjust the
volume during
a call
].
Press [Volume].
].
Begin with your camera, the music player, the web
browser, and other special features
Use the camera
Take a photo
1. In Idle mode, press and hold
[Camera] to turn on the
camera.
2. Aim the lens at the subject and
make any desired adjustments.
3. Press [ ] or [Camera] to take
a photo. The photo is saved
automatically.
4. Press <Preview> to take
another photo.
15
Step outside the phone
View a photo
1. In Idle mode, press <Menu>
and select My files → Images
→ My photos.
Play a video
2. Select the photo you want.
Record a video 1. In Idle mode, press and hold
[Camera] to turn on the
camera.
2. Press [1] to switch to Record
mode.
3. Press [ ] or [Camera] to start
recording.
4. Press [ ], < >, or [Camera]
to stop recording. The video is
saved automatically.
5. Press <Preview> to record
another video.
16
1. In Idle mode, press <Menu>
and select My files → Videos →
My video clips.
2. Select the video you want.
Play music
Copy music
files to the
phone
Use these methods:
•
Download from the wireless
webp. 48
•
Download from a computer
using the optional Samsung PC
StudioSamsung PC Studio
User’s Guide
•
Receive via Bluetoothp. 91
Create a play
list
2. Press <Options> and select
Add to playlist → Add all or
Add files.
3. For Add files, press [ ] to
select the files you want and
press <Select>.
4. Press <Back> to return to the
music player screen.
Play music
files
1. From the music player screen,
press [ ].
2. During playback, use the
following keys:
•
: pauses or resumes
playback.
• Left: returns to the previous
file.
• Right: skips to the next file.
• Up: opens the play list.
• Volume: adjusts the
volume.
• Down: stops playback.
Step outside the phone
1. In Idle mode, press <Menu>
and select Applications →
Music player.
17
Step outside the phone
Browse the web
Use Phonebook
Using a built-in web browser, you can easily access the
wireless web to get a variety of up-to-date services
and information and to download web content.
Launch the
web browser
Navigate the
web
18
In Idle mode, press [
].
Add a contact
To the phone’s memory:
1. In Idle mode, enter a phone
number and press <Options>.
2. Select Save contact → Phone
→ a number type.
•
To scroll through browser items,
press [Up] or [Down].
•
To select an item, press [
•
To return to the previous page,
press <Back>.
•
To move to the next page, press
<Options> and select Go →
Forward.
•
To access options, press
<Options>.
].
3. Specify contact information:
First name, Last name, Mobile,
Home, Office, Fax, Other, Email,
Caller ID, Ringtone, Group, and
Memo.
4. Press <Save> to save the
contact.
To the SIM card:
2. Select Save contact → SIM.
3. Enter a name.
4. Press <Save> to save the
contact.
Find a contact
1. In Idle mode, press
<Contacts>.
Create and
send a name
card
1. In Idle mode, press <Menu>
and select Phonebook → My
namecard.
Step outside the phone
1. In Idle mode, enter a phone
number and press <Options>.
2. Specify your contact
information.
3. Press <Save> to save the
name card.
4. To send the name card, press
<Options> and select Send
via → a sending method.
2. Enter the first few letters of the
name you want.
3. Select a contact.
4. Scroll to a number and press
[ ] to dial, or press [ ] to
edit contact information.
19
Step outside the phone
Send messages
1. In Idle mode, press <Menu>
Send a text
and select Messages → Create
message (SMS)
message → Text message.
2. Enter the message text.
3. Press <Options> and select
Save and send or Send only.
4. Enter destination numbers.
5. Press [
Send a
multimedia
message
(MMS)
] to send the message.
5. For Image and video, select
Add image or Add video and
add an image or video clip.
For Sound, select Add sound
and add a sound clip.
6. Select Message.
7. Enter the message text and
press [ ].
8. Press <Options> and select
Send.
1. In Idle mode, press <Menu>
and select Messages → Create
message → Multimedia
message.
9. Enter destination numbers or
addresses.
2. Select Subject.
10. Press [
3. Enter the message subject and
press [ ].
20
4. Select Image and video or
Sound.
] to send the message.
2. Select Subject.
View messages
View a text
message
From the Inbox:
4. Select Message.
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
5. Enter the e-mail text and press
[ ].
6. Select File attached.
8. Press <Options> and select
Send.
9. Enter e-mail addresses.
10. Press [
] to send the e-mail.
1. Press <View>.
2. Select the message from the
Inbox.
3. Enter the e-mail subject and
press [ ].
7. Add image, video, sound, music
files, or document files.
When a notification appears:
Step outside the phone
Send an e-mail 1. In Idle mode, press <Menu>
and select Messages → Create
message → Email.
2. Select an SMS message (
View a
multimedia
message
).
When a notification appears:
1. Press <View>.
2. Press <Options> and select
Retrieve.
3. Select the message from the
Inbox.
21
Step outside the phone
View a
multimedia
message
(continued)
1. In Idle mode, press <Menu>
and select Messages → My
messages → Inbox.
2. Select an MMS message (
View an e-mail
Use Bluetooth
From the Inbox:
).
1. In Idle mode, press <Menu>
and select Messages → My
messages → Email inbox.
2. Select an account.
3. Press <Yes> to download new
e-mails or headers.
4. Select an e-mail or a header.
5. If you selected a header, press
<Options> and select
Retrieve to view the body of
the e-mail.
22
Your phone is equipped with Bluetooth technology,
enabling you to connect the phone wirelessly to other
Bluetooth devices and exchange data with them, talk
hands-free, or control the phone remotely.
Turn on
Bluetooth
1. In Idle mode, press <Menu>
and select Settings →
Bluetooth → Activation → On.
2. Select My phone’s visibility →
On to allow other devices to
find your phone.
1. In Idle mode, press <Menu>
and select Settings →
Bluetooth → My devices →
Search for new devices.
Send data
1. Access an application,
Phonebook, My files, or
Calendar.
2. Scroll to an item.
2. Select a device.
3. Press <Options> and select
Send via → Bluetooth.
3. Enter a Bluetooth PIN or the
other device’s Bluetooth PIN, if
it has one, and press <OK>.
When the owner of the other
device enters the same code,
pairing is complete.
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press <OK>.
Receive data
To receive data via Bluetooth, your
phone’s Bluetooth feature must be
active.
1. When a device attempts to
access your phone, press
<Yes> to permit the
connection.
2. If necessary, press <Yes> to
confirm that you are willing to
receive.
23
Step outside the phone
Search for and
pair with a
Bluetooth
device
Step outside the phone
Watch the phone display on a TV
You can view the display of your phone on a TV screen
by connecting the phone and TV with a TV out cable.
This enables you to enjoy the photos, videos and
music stored in the phone’s memory with your family
or friends on a larger screen.
Important TV
information
•
•
•
•
24
Depending on your particular
TV model, the location and
shape of the video input and
audio output ports may vary.
Match cable connector and TV
port colours.
Depending on the video
system, the image may vibrate
or in some other way be less
than optimal.
Depending on the video quality,
some video files may not
display.
You cannot use a Bluetooth
stereo headset or the zooming
feature in TV Out mode.
Transfer
phone display
to a TV
1. With the TV switched on,
connect your phone to the TV
with a TV out cable, as shown.
2. Switch the TV to External Input
mode.
The display switches to TV Out
mode and you can view the
phone’s display on the TV
screen.
3. If necessary, set the video
system for your TV in the TVout settings menu.p. 84
4. Access the application you want
and open files.
Enter text
AB, T9, Number, and Symbol modes
You can enter text in some features, such as
Messages, Phonebook, or Calendar using AB mode, T9
mode, Number mode, and Symbol mode.
Using AB mode
Press the appropriate key until the character you want
appears on the display.
Key
Characters in order displayed
Upper case
Lower case
Changing the text input mode
•
•
•
Press and hold [ ] to switch between T9 mode
(
) and AB mode (
). Depending on your
country, you may also be able to access an input
mode for your specific language.
Press [ ] to change case or switch to Number
mode (
).
Press and hold [ ] to switch to Symbol mode.
(Creating an SMS message with GSM-Alphabet encoding)
Other AB mode operations
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
25
Enter text
•
•
•
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Other T9 mode operations
Using T9 mode
•
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
•
•
•
Entering a word in T9 mode
1. Press [2] to [9] to start entering a word. Press
each key once for each letter.
For example, press [4], [3], [5], [5], and [6] to
enter Hello in T9 mode.
T9 predicts the word that you are typing, and it
may change with each key that you press.
2. Enter the whole word before editing or deleting
characters.
3. When the word displays correctly, go to step 4.
Otherwise, press [0] to display alternative word
choices for the keys that you have pressed.
26
For example, Of and Me use [6] and [3].
4. Press [ ] to insert a space and enter the next
word.
Press [1] to enter periods or apostrophes
automatically.
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [C] to delete characters one by one. Press
and hold [C] to clear the display.
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Add appears on the bottom line.
3. Press <Add>.
4. Enter the word you want using AB mode and press
<OK>.
Using Number mode
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Call functions
Advanced calling features
Making a call
Using Symbol mode
Symbol mode enables you to insert symbols.
To
Press
display more symbols
[Up] or [Down].
select a symbol
the corresponding
number key.
clear the entered symbols
[C].
insert the symbols
<OK>.
1. In Idle mode, enter the area code and phone
number.
• Press [C] to clear the last digit or press and
hold [C] to clear the whole display. You can
move the cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
2. Press [ ].
3. When you want to end the call, press [
].
Making an international call
1. In Idle mode, press and hold [0]. The + character
appears.
2. Enter the country code, area code, and phone
number, then press [ ].
27
Call functions
Redialling recent numbers
Answering a call
1. In Idle mode, press [ ] to display the list of
recent numbers.
2. Scroll to the number you want and press [ ].
When you receive an incoming call, the phone rings
and displays the incoming call image.
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
Phonebook.p. 33
You can also use the speed dial feature to assign your
most frequently dialled numbers to specific number
keys.p. 36
You can quickly dial a number from the SIM card using
its location number assigned when stored.
1. In Idle mode, enter a location number and press
[ ].
2. Press [Left] or [Right] to scroll through other
numbers.
3. Press <Dial> or [ ] to dial the number you want.
28
Press <Accept> or [
] to answer the call.
Tips for answering a call
•
•
•
When Anykey answer is active, you can press
any key, except for <Reject> and [ ].p. 83
Press <Reject> or [ ] to reject a call.
Press and hold [Volume] to reject a call or mute
the ringer, depending on the Volume key setting.
p. 83
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Using the headset
Use the headset to make or answer calls without
holding the phone.
To
Press
redial the last call
the button twice.
answer a call
the button.
end a call
the button.
Placing a call on hold/Retrieving
Press <Hold> to place a call on hold, or press
<Retrieve> to retrieve the call.
Making a second call
You can access a number of functions during a call.
You can make another call if your network supports
this function.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
4. Press <Options> and select End held call to end
the call on hold.
5. To end the current call, press [ ].
Adjusting the volume during a call
Answering a second call
Options during a call
Use [Volume] to adjust the earpiece volume during a
call.
Call functions
Connect the headset to the jack on the right side of
the phone. The button on the headset works as
follows:
Press [Volume up] to increase the volume level and
[Volume down] to decrease the volume level.
You can answer an incoming call while already on the
phone, if your network supports this function and you
have activated the call waiting feature.p. 87
29
Call functions
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select End held call to end
the call on hold.
4. To end the current call, press [ ].
•
•
•
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
Using the speakerphone feature
Use the speakerphone to talk and listen with the
phone a short distance away. Press [ ] and then
<Yes> to activate the speakerphone feature. Press
[ ] again to switch back to the earpiece.
•
Using In-call options
Press <Options> to access the following options
during a call:
• Speaker on/Normal: turn on the speakerphone
feature or switch back to Normal mode.
• Switch to headset/Switch to phone: switch the
call to a Bluetooth headset or hands-free car kit or
back to the phone.
30
Menu: access the phone's menu functions.
Voice off/Voice on: switch off the phone's
microphone so that the other person on the phone
cannot hear you, or switch it back on.
Mute keys/Send keys: switch the key tones off
or on.
•
•
Send DTMF: send the DTMF (Dual tone multifrequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Phonebook: access the contact list.
End held call: disconnect the call currently on
hold.
•
•
•
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
Select one: select one of the multi-party call
participants. You can then use the following
options:
Private: have a private conversation with the
selected participant. The other participants can
converse with each other. After the private
conversation, select Join to return both private
participants to the multi-party call.
Remove: disconnect the selected participant.
Menu functions
All menu options listed
Call log (Menu 1)
Use this menu to view the calls you have dialled,
received, or missed, and the length of the calls. You
can also check the cost of your calls, if your SIM card
supports this function.
To access this menu, press <Menu> in Idle mode and
select Call log.
Recent contacts (Menu 1.1)
This menu displays the most recent calls dialled,
received, or missed.
Accessing a call log
1. Press [Left] or [Right] to move to another call
type.
2. Press [Up] or [Down] to scroll through the call list.
31
Menu functions
3. Press [ ] to view the details of a call, or [
dial a number.
] to
Using call log options
This menu displays the most recent calls you have
received.
While viewing call details, press <Options> to access
the following options:
• Call: edit the number and dial it.
• Add to Phonebook: save the number to
Phonebook.
• Send: send an SMS or MMS message to the
selected number.
• Delete: delete the selected call log or all logs.
Delete all (Menu 1.5)
Missed calls (Menu 1.2)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
• Last call time: check the length of your last call.
• Total dialled calls: check the total length of all
the calls you have dialled.
• Total received calls: check the total length of all
the calls you have received.
This menu displays the most recent calls you did not
answer.
Dialled calls (Menu 1.3)
This menu displays the most recent calls you have
dialled.
32
Received calls (Menu 1.4)
Use this menu to delete all of the records in each call
type.
1. Press [ ] to select the call types to be cleared.
2. Press <Delete>.
3. Press <Yes> to confirm the deletion.
Call time (Menu 1.6)
To reset the call timers, press <Reset>. You need to
enter the phone password.
Call costs (Menu 1.7)
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
To access this menu, press <Menu> in Idle mode and
select Phonebook.
Contact list (Menu 2.1)
Phonebook (Menu 2)
This network feature displays the cost of calls. This
menu is available only if supported by your SIM card.
Note that this is not intended to be used for billing
purposes.
• Last call cost: check the cost of your last call.
• Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max. cost, you must reset the counter before
you can make another call.
• Max. cost: check the maximum cost limit set in
Set max. cost.
• Reset counters: reset the cost counters.
• Set max. cost: set the maximum cost authorised
for your calls.
• Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
(Menu 2)
Menu functions
The password is preset to 00000000. You can
change this password.p. 92
Phonebook
Use this menu to search for contacts in Phonebook.
You can quickly access this menu by pressing
<Contacts> in Idle mode.
Finding a contact
1. Enter the first few letters of the name that you
want to find.
2. Select the name from the list.
3. Scroll to a number and press [ ] to dial, or press
[ ] to edit contact information.
33
Menu functions
Finding a contact in Idle mode
You can find contacts in Idle mode, by the spelling of a
contact name. The phone searches for the contact
names starting with the letters labelled on any of the
keys you pressed.
1. In Idle mode, press the number keys containing
the letters you want.
2. Press <Options> and select Search as spelling.
The phone searches Phonebook for the matching
contacts and shows results.
Using Phonebook options
While viewing contact details, press <Options> to
access the following options:
• Edit: edit contact information.
• Send message: send an SMS or MMS message to
the selected number, or an e-mail to the selected
address.
• Copy to: copy the contact to the phone’s memory
or to the SIM card.
34
•
•
Send via: send the contact via SMS, MMS, e-mail,
or Bluetooth.
Delete: delete the selected contact.
Create contact (Menu 2.2)
Use this menu to add a new contact to Phonebook.
Storing a contact in the phone’s memory
1. Select Phone.
2. Change the settings or enter information about the
contact.
• First name/Last name: assign a name.
• Mobile/Home/Office/Fax/Other: add a
number in any type.
• Email: assign an e-mail address.
• Caller ID: assign an image or a video to alert
you to a call from the person.
• Ringtone: assign a ringtone to alert you to a
call from the person.
• Group: assign the number to a caller group.
• Memo: add a memo about the person.
3. Press <Save> to save the contact.
Storing a contact on the SIM card
To assign a caller ID image or video, ringtone, or
group, the contact must be saved to the phone’s
memory.
Group (Menu 2.3)
Use this menu to organise your contacts in caller
groups.
Creating a caller group
1. Press <Options> and select Create group.
2. Enter a name for the group.
3. Select the caller ID line and set an image.
Adding members to a caller group
1.
2.
3.
4.
Select a group.
Press <Add>.
Press [ ] to select the contacts to be added.
Press <Select>.
Managing caller groups
Phonebook (Menu 2)
3. Press <Save> to save the contact.
4. Select the ringtone line and set a melody.
5. Press <Save> to save the group.
Menu functions
1. Select SIM.
2. Enter information about the contact.
• Name: assign a name.
• Phone number: add a number.
• Location: assign a location number.
While viewing the group list, press <Options> to
access the following options:
• View: display the members of the selected group.
• Create group: add a new group.
• Edit: change the group properties.
• Send message: send an SMS, MMS, or e-mail
message to the group members you want.
• Delete: delete the selected group or all groups.
Group members, however, will not be deleted from
Phonebook.
35
Menu functions
Speed dial (Menu 2.4)
Dialling speed dial numbers
Use this menu to assign a speed dial number (2 to 9)
for 8 of your most frequently dialled numbers.
In Idle mode, press and hold the appropriate key.
Assigning speed dial numbers
1. Select a key location from 2 to 9. Key 1 is reserved
for your voicemail server.
2. Select a contact from the contact list.
3. Select a number, if the contact has more than one
number.
Managing speed dial entries
From the Speed dial screen, press <Options> to
access the following options:
• Add: assign a number to an unassigned key.
• View: check the name and number assigned to a
key.
• Change: assign a different number to a key.
• Remove: clear the speed dial setting for a key.
36
My namecard (Menu 2.5)
Use this menu to create a name card and send it to
other people.
Saving your name card
The procedure for creating your name card is the
same as the one for saving a phone number in the
phone’s memory.p. 34
Using namecard options
After saving your name card, press <Options> to
access the following options:
• Edit: edit the name card.
• Send via: send the name card via SMS, MMS,
e-mail, or Bluetooth.
• Exchange namecard: exchange name cards with
another person via Bluetooth.
• Delete: delete the name card.
Service number (Menu 2.8)
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
Use this menu to view the list of Service Dialling
Numbers (SDN) assigned by your service provider,
including emergency numbers and numbers for
directory enquiries. This menu is available if your SIM
card supports SDN.
1. Scroll to the number you want and press <View>.
2. Press <Dial> or [ ].
Management (Menu 2.7)
Phonebook (Menu 2)
Use this menu to manage contacts in Phonebook.
• Save new contact to: select a default memory
location for saving contacts. If you select Always
ask, the phone will ask you to select a memory
location each time you save a number.
• Copy all to: copy all of the contacts stored on the
SIM card to the phone’s memory, or vice versa.
• Delete all: delete all of the contacts from your
phone’s memory, your SIM card, or both.
• Memory status: check the number of contacts
you have stored in the phone’s memory and on the
SIM card.
Menu functions
Own number (Menu 2.6)
37
Menu functions
Applications
(Menu 3)
Use this menu to play music files or Java games, or
edit photos. You can also use convenient features,
such as a voice recorder, alarm clock, calculator,
converter, timer, and stopwatch.
To access this menu, press <Menu> in Idle mode and
select Applications.
Music player (Menu 3.1)
Use this menu to enjoy music. First, you need to save
music files into your phone’s memory.
To enjoy high quality music, you can use an optional
Bluetooth stereo headset.
Normal headsets and Bluetooth mono headsets are
not compatible with the music player.
38
Downloading or receiving music files
Your phone supports *.mp3, *.aac, and *.m4a files
from the phone’s memory.
Use these methods to save music files to your phone’s
memory:
• Download from the wireless webp. 48
• Download from a computer using the optional
Samsung PC StudioSamsung PC Studio User’s
Guide
• Receive via an active Bluetooth connectionp. 91
The downloaded or received files are stored in the
Music folder.p. 69
Creating a play list
1. From the music player screen, press <Options>
and select Add to playlist → Add all or Add files.
2. For Add files, press [ ] to select the files to be
added and press <Select>.
3. Press <Back> to return to the music player
screen.
Playing music files
During playback, use the following keys:
Function
Pauses or resumes playback.
Left
Returns to the previous file.
Right
Skips to the next file.
Up
Opens the play list.
Down
Stops playback.
Volume
Adjusts the volume level.
1
Turns 3D sound on or off.
2
Changes the playback animation.
Function
3
Changes the repeat mode.
4
Changes the equaliser mode.
6
Turns Shuffle mode on or off.
Camera
Locks the keys when held down to keep
accidental presses from affecting
playback.
Applications (Menu 3)
Key
Key
Menu functions
1. From the music player screen, press <Options>
and select Play via.
2. Select Phone to use the phone speaker.
Select Bluetooth stereo headset to use a
Bluetooth headset, and then search for and
connect the phone to the headset.
Using music player options
From the music player screen, press <Options> to
access the following options:
• Play via/Pause: begin or pause playback.
• Transfer to Bluetooth stereo headset/
Transfer to phone: switch sound output to a
Bluetooth stereo headset or back to the phone
speaker.
• Open: access the play list of the current album or
album list. On the album list, you can set up
multiple albums.
39
Menu functions
•
•
•
•
•
•
40
Go to Music: access the Music folder.
Send via: send the file via e-mail or Bluetooth.
Set as: set the file as your ringtone or as a
ringtone for a Phonebook entry.
Activate key: get a new licence key when the key
for the selected DRM files expires.
Remove from playlist: remove the selected file
from the play list.
Settings: change the default settings for playing
music files.
Repeat mode: select a repeat mode.
Shuffle: set the music player to play tracks in
random order.
MP3 overrides other sounds: set the music
player to continue playback even if you exit it.
Equaliser: select an equaliser setting.
3D sound: turn 3D sound on or off.
Visualisation: change the playback animation
and select the length of time the backlight remains
on while playing music files.
•
•
Volume: select a volume level.
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
Accessing the play list
From the music player screen, press [Up].
Press <Options> to access the following options:
• Play via: play the currently selected file via the
phone speaker or a Bluetooth stereo headset.
• Add to playlist: add files to the play list.
• Go to album list: access the album list.
• Move to: move the selected file to another album.
• Copy to: copy the selected file to another album.
• Move track in playlist: move the selected file to
the position you want within the play list.
• Activate key: get a new licence key when the key
for the selected DRM file expires.
• Remove: remove the selected file or all files from
the play list.
•
•
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
Use this menu to record voice memos. A voice memo
can be up to one hour long.
Recording a voice memo
Playing a voice memo
1. From the Voice recorder screen, press <Options>
and select Go to My voice clips.
2. Select a voice memo.
Function
Pauses or resumes playback.
Left
Moves backward in a memo.
Right
Moves forward in a memo.
Volume
Adjusts the volume.
Down
Stops playback.
Applications (Menu 3)
1. Press [ ] to start recording.
2. Speak into the microphone.
Press [ ] to pause or resume recording.
3. Press <Stop> or [Down] to end recording. The
voice memo is saved automatically.
4. Press [ ] to review the voice memo, or [Up] to
record a new memo.
Key
Menu functions
Voice recorder (Menu 3.2)
During playback, use the following keys:
Changing the recording mode
You can change the recording mode of the voice
recorder. The maximum recording time is determined
by this setting. Before recording a memo, press
<Options> and select Settings → a recording mode:
• Limit for multimedia message: record a voice
memo for adding to an MMS message.
• Limit for email: record a voice memo for adding
to an e-mail.
• Maximum 1 hour: record a voice memo of up to
one hour.
41
Menu functions
Image editor (Menu 3.3)
Use this menu to edit your photos using various
editing tools.
3. Press <Done>.
4. Press <Options> and select Save as.
5. Enter a new file name and press <OK>.
Applying an effect
Cropping
1. Press <Options> and select New image → Open
or Take photo.
2. Select a photo or take a new photo.
3. Press <Options> and select Effects → an effect
option.
4. Press <Done>.
5. Press <Options> and select Save as.
6. Enter a new file name and press <OK>.
1. Select a photo or take a new photo.
2. Press <Options> and select Crop.
3. Move the cropping frame to the area of the image
you want.
Press <Options> and select Resize to change the
frame size.
4. Press <Options> and select Done.
5. Press <Options> and select Save as.
6. Enter a new file name and press <OK>.
Transforming
1. Select a photo or take a new photo.
2. Press <Options> and select Transform → an
option:
• Resize: change the photo size.
• Rotate: rotate the photo 90 degrees.
• Flip: flip the photo.
42
Adding visual features
You can decorate photos by adding a frame, an image,
or a note.
1. Select a photo or take a new photo.
2. Press <Options> and select Insert → a feature
type.
Merging a stamp effect
Applications (Menu 3)
This editing tool allows you to make an outline stamp
of a photo and then merge it with another photo. You
can use this tool to create your own photo postcard by
taking a photo of a handwritten message and merging
it with a photo.
1. Select a photo or take a new photo.
2. Press <Options> and select Merge stamp. The
background photo appears in the image box next
to
.
3. Press <Options> and select Add image.
4. Add a photo by selecting or taking a photo. The
added photo appears in the image box next to
. This will be the stamp.
5. Press <Options> and select Merge. The stamp
photo is added to the background photo as an
outline.
6. Press <Options> to access the following stamp
edit options:
• Resize: change the stamp size.
• Move: change the position of the stamp.
• Rotate: rotate the stamp.
• Stamp colour: change the stamp colour.
• Shadow on: apply a shadow to the stamp.
7. When you have finished, press <Options> and
select Done.
8. Press <Options> and select Save as.
9. Enter a new file name and press <OK>.
Menu functions
3. Select an item or enter text to be inserted.
4. Adjust the position of the inserted item and press
<Done>.
5. Press <Options> and select Save as.
6. Enter a new file name and press <OK>.
43
Menu functions
Java world (Menu 3.4)
•
Use this menu to access the embedded Java games
and downloaded Java applications.
•
Accessing an embedded game
•
1. Select My games → a game.
2. If necessary, press [ ].
Using Java application options
From the application list, press <Options> to access
the following options:
• Start: launch the selected application.
• Move to: move the application to another folder.
• Delete: delete the selected application or all
applications, except for the embedded games.
• Protection: lock the application to protect it from
being deleted, or unlock the application.
• Details: access the application properties.
• Permissions: set permission settings for services
charging you additional costs, such as network
access and SMS.
44
•
Upgrade: upgrade the application to the latest
version.
Send information via Text message: send the
URL containing the application via SMS.
Memory status: access memory information for
applications.
Settings: select a connection profile to be used for
applications requiring network access. You can also
create or edit a profile.p. 93
World clock (Menu 3.5)
Use this menu to set your local time zone and find out
the current time in another part of the world.
Viewing world time
1. From the world map, press [Down].
2. Press [Left] or [Right] to scroll to the city you
want. As the time line moves, the time and date of
the given zone display.
3. Press [ ] to save the city as your local time zone.
Applying daylight saving time
• Repeat: select a repeat option.
• Alarm tone: select an alarm tone.
3. Press <Save>.
Stopping an alarm
•
•
Use this menu to set alarms. The alert type for a
normal alarm corresponds to the call alert type
settings. A wake-up alarm is not affected by your
sound settings.
Deactivating an alarm
1. Select the type of alarm.
2. Set each alarm option:
• Alarm: activate the alarm.
• Alarm time: enter the time for the alarm to
ring.
• AM/PM: select AM or PM in 12-hour time
format.
For a non-wake-up alarm, press any key.
For a wake-up alarm, press <Confirm> or [ ].
Press any key, except <Confirm> and [ ], to
cause it to sound again after 5 minutes. You can do
this a maximum of 5 times.
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line and press <Save>.
Setting alarms to sound when the phone is off
From the Alarm screen, select Auto power → On.
If the phone is off when it is time for the alarm to
sound, the phone switches on and sounds the alarm.
45
Applications (Menu 3)
Alarm (Menu 3.6)
Setting an alarm
Menu functions
1. From the world map, press <Options> and select
Apply daylight saving time.
2. Press [ ] to select the time zones you want.
3. Press <Save>.
Menu functions
Calculator (Menu 3.7)
Converter (Menu 3.8)
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
1. Enter the first number.
• Press <.()> to insert a decimal point or
bracket.
• Press [ ] or [ ] to move the cursor.
2. Press one of the Navigation keys to access the
math function you want.
3. Enter the second number.
4. Press [ ] to view the result.
5. If necessary, repeat from step 2 to continue the
calculation.
Use this menu for common conversions, such as
currency and temperature.
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
3. Enter the value to be converted and press [Down].
• Press [ ] to insert a decimal point.
• Press [ ] to change the temperature to above
zero (+) or below zero (-).
4. Press [Left] or [Right] to select the unit to which
you want to convert.
The equivalent value for the amount you entered
displays.
For the currency converter, you can view and set
currency rates by pressing <View rate>.
46
Use this menu to manage the licence keys you have
acquired to activate media contents locked by DRM
systems.
Starting the timer
Press <Options> to access the following options:
• View: open the corresponding media content.
• Delete: delete the selected licence key or all
licence keys.
• Go to my items: access the corresponding file
folder.
• Details: access the properties of the licence key.
1. Press <Set>.
2. Enter the length of time you want to count down
and press <OK>.
3. Press [ ] to start counting down.
Stopping the timer
•
•
Press any key when the timer rings.
Press [ ] on the Timer screen to stop the timer
before it rings.
Stopwatch (Menu 3.10)
Use this menu to measure elapsed time. The
maximum time is 10 hours.
1. Press [ ] to start the stopwatch.
2. Press [ ] to check an interval. You can repeat this
step for a total of 3 intervals.
Applications (Menu 3)
Key management (Menu 3.11)
Use this menu to set a period of time for the phone to
count down. The phone sounds an alarm when the
specified period of time expires.
Menu functions
Timer (Menu 3.9)
SIM AT (Menu 3.12)
This menu is available if you use a SIM AT card that
supports SIM Application Toolkit menus and provides
additional services, such as news, weather, sports,
entertainment, and location services. Available
services may vary, depending on your service
provider’s plans. For details, see your SIM card
instructions or contact your service provider.
47
Menu functions
Browser
(Menu 4)
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
From the wireless web, you can access up-to-date
information and a wide variety of media content, such
as games, wallpapers, ringtones, and music files.
To access this menu, press <Menu> in Idle mode and
select Browser.
Home (Menu 4.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [ ] in Idle mode.
Navigating the web
48
To
Press
scroll through browser
items
[Up] or [Down].
select a browser item
[ ], or <Options> and
select Go to.
To
Press
return to the previous
page
<Back>, or <Options>
and select Go → Back.
move to the next page
<Options> and select Go
→ Forward.
Using page options
From any web page, press <Options> to access the
following options:
• Go to: access the linked web page.
• Go to homepage: return to the homepage.
• Keys to buy: send a request for buying a licence
key for a DRM file. This option will be available only
when you access the web browser from a message
containing a DRM file.
• Enter URL: enter a URL address manually.
• Go: move backward or forward through pages in
history.
• Reload: reload the current page with updated
information.
•
•
•
•
•
About browser: access version and copyright
information about the browser.
Exiting the browser
Menu functions
•
Press [ ] to end the network connection and exit the
browser.
Enter URL (Menu 4.2)
Use this menu to manually enter a URL address and
access the associated web page.
Browser (Menu 4)
Bookmarks: bookmark the current page or access
the bookmark list.
Send URL: send the URL of the current page via
SMS or e-mail.
To SmartFit view/To Desktop view: change the
display mode of the browser.
Save: save the selected image or page.
Page details: access the page properties.
Browser options: change the various settings for
the browser.
Cache: change the cache mode or clear the cache.
The cache is a temporary memory that stores
recently accessed web pages.
Cookies: change the cookie acceptance mode or
delete cookies. Cookies are pieces of personal
information sent to a web server while navigating
the web.
Preferences: change the browser display and
sound settings.
Certificates: access certificate information.
You can add the entered URL to the bookmark list by
selecting Add bookmark.
Bookmarks (Menu 4.3)
Use this menu to save URL addresses in order to
quickly access web pages.
Adding a bookmark
1. Press <Add>. If a bookmark has already been
saved, press <Options> and select Add
bookmark.
49
Menu functions
2. Enter a title for the bookmark and press [Down].
3. Enter a URL address and press <Save>.
Accessing a bookmarked page
Selecting a bookmark item launches the web browser
and accesses the associated web page.
50
Saved pages (Menu 4.4)
You can access the list of pages you have saved while
online.
If you select a link on the page, the phone switches to
online to access the linked page.
Using bookmark options
History (Menu 4.5)
On the Bookmarks screen, press <Options> to access
the following options:
• Go to: access the bookmarked web page.
• Go to homepage: access the homepage.
• Enter URL: enter a URL address manually.
• Edit bookmark: edit the URL address and title of
the bookmark.
• Add bookmark: add a new bookmark.
• Send URL: send the URL address of the bookmark
via SMS.
• Delete: delete the selected bookmark or all
bookmarks.
You can access the list of pages you have accessed
recently.
Select a URL from the list to access the corresponding
web page.
Clear cache (Menu 4.6)
Use this menu to clear information stored in the cache,
a temporary memory that stores recently accessed
web pages.
Browser settings (Menu 4.7)
Messages
Use this menu to select a connection profile to be used
for accessing the wireless web. You can also create or
edit a profile.p. 93
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also access push messages and cell broadcast
messages.
To access this menu, press <Menu> in Idle mode and
select Messages.
Create message (Menu 5.1)
Messages (Menu 5)
Use this menu to select a connection profile to be used
for accessing your service provider’s streaming
service. This menu may not be shown depending on
your service provider. You can also create or edit a
profile.p. 93
Menu functions
Streaming settings (Menu 4.8)
(Menu 5)
Use this menu to create and send messages.
Text message (Menu 5.1.1)
Short Message Service (SMS) allows you to send or
receive text messages that may include simple
pictures, animated images, and melodies.
51
Menu functions
Creating and sending an SMS message
1. Enter your message and press [ ].
• The maximum number of characters allowed
in a message varies by service provider. If
your message exceeds the maximum number
of characters, the phone will split the
message.
• You can use various options by pressing
<Options>.next section
2. Enter a destination number.
To send the message to more than one recipient,
fill in additional destination fields.
3. Press [ ] to send the message.
Using options while composing an SMS message
While composing a message, press <Options> to
access the following options:
• Save and send: save the message in Sentbox
and then send it.
• Send only: just send the message.
• Insert: add a template, Phonebook entry, or
bookmark to text.
52
•
•
•
•
•
•
Add image/Add animation/Add melody: attach
a simple image, an animated image, or a melody.
Attach: attach a name card or calender data as a
data format attachment.
Save in: save the message in another message
folder.
Input language: change the language to be used
in T9 input mode.
Text style: change the text attributes.
Input method: change the text input mode.
Multimedia message (Menu 5.1.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, image, video, and
audio, from phone to phone or from phone to e-mail.
Creating and sending an MMS message
1. Select the Subject line.
You can use various options by pressing
<Options> in each field.next section
2. Enter the message subject and press [
].
3. Select the Image and video line.
4. Select Add image or Add video and add an
image or a video clip.
Select the Sound line.
Select Add sound and add a sound clip.
Select the Message line.
Enter the message text and press [ ].
When you have finished, press <Options> and
select Send.
10. Enter a phone number or an e-mail address.
To send the message to more than one recipient,
fill in additional destination fields.
11. Press [ ] to send the message.
Messages (Menu 5)
5.
6.
7.
8.
9.
While composing a message, press <Options> to
access the following options:
• Add: add the message subject or message text.
• Add image/Add video/Add sound: add an
image, video clip, or sound clip.
• Change image/Change video/Change sound:
replace an added item.
• Edit: edit the subject or text.
• Preview: view the message as it will be shown on
the recipient’s phone.
• View: open the selected attachment.
• Send: send the message.
• Save in: save the message in another message
folder.
• Add page: add pages. Move to each page by
pressing [Left] or [Right].
• Delete page: delete a page.
• Edit page: change the duration of page display or
move the page forward among the other pages.
Menu functions
• The maximum size allowed for a message can
differ, depending on your service provider.
• Depending on the file type or DRM (Digital
Rights Management) system, some files may
not be able to be forwarded.
Using options while composing an MMS message
53
Menu functions
•
•
Attach: attach a Phonebook entry as a name card
or calender data as a data format attachment, or a
document file stored in the Other files folder.
Remove subject/Remove message/Remove
media/Remove sound/Remove: remove an
added item.
Email (Menu 5.1.3)
You can create and send e-mails that include text,
audio, and images.
Creating and sending an e-mail
1. Select the Subject line.
You can use various options by pressing
<Options> in each field.next section
2.
3.
4.
5.
54
Enter the subject of your e-mail and press [ ].
Select the Message line.
Enter the e-mail text and press [ ].
Select the File attached line.
6. Add media files, document files stored in the
Other files folder, or Phonebook entries as name
cards or calender data as data format
attachments.
Depending on the file type or DRM (Digital Rights
Management) system, some files may not be
able to be forwarded.
7. When you have finished, press <Options> and
select Send.
8. Enter an e-mail address.
To send the e-mail to more than one recipient, fill
in additional destination fields.
9. Press [ ] to send the e-mail.
Using options while composing an e-mail
While composing an e-mail, press <Options> to
access the following options:
• Add: add the subject of your e-mail or e-mail text.
• Edit: edit the subject or text.
• Add image/Add video/Add sound/Add music:
add media files stored in the phone’s memory.
•
•
•
•
My messages (Menu 5.2)
Use this menu to access messages you have received,
sent, or which have failed in sending.
Inbox (Menu 5.2.1)
This folder stores all of the messages you have
received, except for e-mails.
The following icons may appear on the message list to
show the message type:
•
SMS
•
MMS
•
MMS notification ( : Being retrieved,
: Failed to retrieve)
•
Voicemail
•
Push message from web servers or
Configuration message, containing network
parameters from your service provider
•
CB (Cell broadcast) message from your
service provider
•
Delivery report for your sent messages
Messages (Menu 5)
•
Viewing a message
Menu functions
•
•
Add other files: add document files stored in the
Other files folder.
Send: send the e-mail.
Save in: save the e-mail in another message
folder.
Attach: attach Phonebook entries as name cards
or calender data as data format attachments.
Remove subject/Remove message: clear the
subject or text.
Remove attachment: delete the selected
attachment.
Remove all attachments: delete all
attachments.
• Depending on the DRM (Digital Rights
Management) system, messages having web
content may not be able to be forwarded.
• A ! icon next to a message means that the
message is of high priority. A grey-coloured
message icon indicates low priority.
55
Menu functions
Using message options
While viewing a message, press <Options> to access
the following options:
SMS messages
• Reply via: reply to the sender via SMS or MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Move to phone/Move to SIM: move the
message between the SIM card and the phone’s
memory.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Cut media: save media content from the message
to your phone’s memory.
• Protection: protect the message from being
deleted. You can protect only those messages
stored in the phone’s memory.
• Add to Block list: add the sender’s number to the
Block list to reject the messages from the sender.
56
MMS messages
• Retrieve: retrieve the MMS message from the
MMS server.
• Reply via text message: reply to the sender via
SMS.
• Reply via multimedia message to: reply to the
sender via MMS.
• Forward: forward the message to other people.
• Delete: delete the message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Cut media: save media content from the message
to your phone’s memory.
• Protection: protect the message from being
deleted.
• Details: access the message properties.
Configuration messages
• Install: apply the configuration specified in the
message to your phone.
• Delete: delete the message.
•
Protection: protect the message from being
deleted.
Delivery reports
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the report.
• Delete: delete the report.
Drafts (Menu 5.2.2)
This folder stores messages you have saved to send at
a later time.
When you select a message, it opens in Edit mode so
that you can edit and send the message.
Outbox (Menu 5.2.3)
This folder stores messages that the phone is
attempting to send or has failed to send.
Messages (Menu 5)
Broadcast messages
• Save: save the message to the phone’s memory.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
Protection: protect the report from being deleted.
Menu functions
Push messages
• Go to URL: connect to the URL specified in the
message.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Protection: protect the message from being
deleted.
•
The following icons are available to show the message
status:
•
Being sent
•
Failed to be sent
While viewing a message, press <Options> to access
the following options:
• Send again: retry sending the message.
• Forward: forward the message to other people.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
57
Menu functions
•
•
•
Delete: delete the message.
Protection: protect the message from being
deleted.
Details: access the message properties.
Sentbox (Menu 5.2.4)
This folder stores messages that you have sent.
While viewing a message, press <Options> to access
the following options:
• Send: send the MMS message.
• Forward: forward the message to other people.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
• Delete: delete the message.
• Protection: protect the message from being
deleted.
• Details: access the message properties.
58
Email inbox (Menu 5.2.5)
This folder stores e-mails that you have received.
Viewing an e-mail
1. Select an e-mail account.
2. Press <Yes> when Check for new email
displays, or press <Options> and select Check
for new mail. The phone checks the e-mail server
and downloads new e-mails.
The following icons may appear on the list to show
the e-mail status:
•
Retrieved from the server
•
Being retrieved
•
Failed to be retrieved
A ! icon next to a message means that the message
is of high priority. A grey-coloured message icon
indicates low priority.
3. Select an e-mail or a header.
4. Press [Left] or [Right] to view other pages in the
e-mail.
5. Press [ ] or [ ] to view the previous or next
e-mail.
Using e-mail options
My folders (Menu 5.2.6)
While viewing the e-mail or header, press <Options>
to access the following options:
• Retrieve: retrieve the body of the e-mail from the
e-mail server.
• Reply: send a reply to the sender, or to the sender
and all of the other recipients.
• Forward: forward the e-mail to other people.
• Delete: delete the e-mail.
• Add to filtering list: add the sender’s e-mail
address or subject to the Block list to reject
e-mails from that address or containing that subject.
• Cut address: extract URLs, e-mail addresses, or
phone numbers from the e-mail.
• Attached items: save the attached files from the
e-mail to your phone’s memory.
• Protection: protect the e-mail from being deleted.
• Details: access the e-mail properties.
Use this menu to create new folders and organise your
messages.
Menu functions
Creating a folder
1. Press <Yes>.
2. Enter a folder name and press <OK>.
Using folder options
Messages (Menu 5)
On the folder list, press <Options> to access the
following options:
• Open: open the selected folder.
• Create folder: add a new folder.
• Rename folder: change the folder name.
• Delete: delete the selected folder.
59
Menu functions
Templates (Menu 5.3)
Multimedia message templates (Menu 5.3.2)
Use this menu to make and use templates of
frequently used messages or passages.
You can access embedded MMS templates or ones you
have saved so that you can use them when composing
an MMS message.
Text message templates (Menu 5.3.1)
You can create SMS templates with the sentences you
use frequently so that you can retrieve and insert
them when composing an SMS message.
Creating a template
1. Select an empty location.
2. Enter a message and press <OK>.
Using template options
From the template list, press <Options> to access
the following options:
• Edit: edit the selected template.
• Send message: create and send a new message
using the selected template.
• Delete: delete the selected template.
• Add new: add a new template.
60
From the template list, press <Options> to access
the following options:
• View: open the selected template.
• Edit: edit the template.
• Send message: send the selected template via
MMS.
• Delete: delete the selected template or all
templates, except for the embedded ones.
Delete all (Menu 5.4)
Use this menu to delete messages in each message
folder all at once.
1. Press [ ] to select the message folders to be
cleared.
Pressing the key twice displays the message types
so that you can specify the ones to be cleared.
Settings (Menu 5.5)
Use this menu to set up various options for using the
messaging service.
•
You can configure SMS settings.
• Sending options: set up the options for sending
SMS messages:
Send read receipt: send a read-reply requests
along with your messages.
Send delivery receipt: set the network to inform
you when your messages have been delivered.
Character support: select a character encoding
type. When you select Automatic, the phone
switches the encoding type from GSM-Alphabet to
Uni-Code if you enter a Unicode character.
•
•
•
Messages (Menu 5)
Text messages (Menu 5.5.1)
Use of Unicode encoding will reduce the maximum
number of characters in a message to about half. If
this menu is not shown, your phone provides
automatic character encoding by default.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
Receiving options: activate 3D vivid view mode
for displaying received SMS messages on your
phone. The phone will convert message text to 3D
vivid graphics and displays it in 3D view mode.
This option is available only when the message
consists of a single page.
Block list: store the phone numbers from which
you want to reject messages.
Current profile: check or select an SMS setting
profile.
Profile settings: set the properties of each
profile:
Service centre: store or change the number of
your SMS server.
Menu functions
2. Press <Delete>.
3. Press [ ] to select the check box to delete
protected messages, and then press <Yes>.
4. Press <Yes> to confirm the deletion.
61
Menu functions
Default destination: enter the default
destination. It will be automatically entered on the
recipient list.
Default type: set the default message type. The
network can convert the messages into the
selected format.
Default validity: set the length of time your
messages are stored in the SMS server.
Setting name: enter a profile name.
Multimedia messages (Menu 5.5.2)
You can configure MMS settings.
• Sending options: set up the options for sending
MMS messages:
Delivery report: set the network to inform you
when your messages have been delivered.
Hide address: set your address to be hidden from
the recipient’s phone.
Read reply: send a read-reply request along with
your messages.
Priority: set the priority level of messages.
62
•
Expiry date: set the length of time messages are
stored in the MMS server.
Delivery time: set a time delay before messages
are sent.
Outgoing message size: select a maximum size
of attached items allowed for messages.
Retrieving options: set up the options for
receiving MMS messages:
Reject unknown senders: reject messages from
unknown senders.
Allow adverts: accept advertisements.
Allow information: accept information
messages.
Allow reports: set the network to inform the
sender when a message has been delivered to you.
Recep. in home network: determine if your
phone retrieves new messages automatically when
you are in your home service area.
Reception when abroad: determine if your
phone retrieves new messages automatically when
you are roaming on another network.
You can configure e-mail settings.
You cannot change e-mail profile and account
settings while an e-mail is being sent or retrieved.
•
Sending options: set up the options for sending
e-mails:
Send copy to self: send a copy of your e-mails to
your e-mail account.
•
Messages (Menu 5)
Emails (Menu 5.5.3)
Send delivery receipt: set the network to inform
you when your e-mails have been delivered.
Send read receipt: send a read-reply request
along with e-mails.
Reply-To address: set an e-mail address to
receive read-reply messages from recipients.
Priority: select the priority level of e-mails.
Add signature: attach your name, phone number,
a simple memo, or a tag line to your e-mails.
Edit name: edit the name in your signature.
Edit number: edit the phone number in your
signature.
Edit note: edit the tag line in your signature.
Receiving options: set up the options for
receiving e-mails:
Check interval: determine how often the phone
checks the server for incoming e-mails. If you
select Do not notify, use the Check for new
email option to receive new e-mails manually.
Menu functions
•
Reception within home network or abroad has the
following options:
- Manual: the phone displays notifications. Use
the Retrieve option to manually download new
messages.
- Automatic: the phone automatically retrieves
messages from the server.
- Reject: the phone rejects all messages.
Multimedia message Profiles: select a
connection profile to be used for MMS. You can also
create or edit a profile.p. 93
63
Menu functions
•
•
64
Read reply: determine whether or not the phone
sends a read-reply for incoming e-mails. If you
select Reply reminder, the phone asks you to
send a read-reply.
Reject if larger than: determine the maximum
size for incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Download method: set whether the phone
downloads e-mail headers only or e-mail headers
and bodies both.
Leave copy of messages on server: leave
copies of e-mails on the e-mail server after
retrieving.
Block list: specify e-mail addresses or subjects
you want to reject.
Email accounts: set up an e-mail account and
select an account to be used.
Current account: check or select an account.
Account settings: configure e-mail accounts
using different e-mail servers. Set the options for
each account:
- Account name: enter a name for the currently
selected account.
- User name: enter a user name.
- Email address: enter your e-mail address.
- SMTP server: enter the IP address or host name
of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- Connect to POP3 server first/Connect to
IMAP4 server first: connect to the POP3 or
IMAP4 server before connecting to the SMTP
server to send e-mails.
- Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or host name
of the server that receives your e-mail.
- POP3 port: enter the POP3 port number.
- User ID: enter the POP3 user name.
- Password: enter the POP3 password.
Messages (Menu 5)
•
- Same as IMAP4: select if you want the SMTP
server to have the same parameters as the
IMAP4 server.
- SMTP user ID: enter the SMTP user name.
- SMTP password: enter the SMTP password.
- Include attachments: select this option to
receive attachments with e-mails.
- Email retrieval limit(1-100): set the number
of headers you will retrieve from the server.
- Secure connection: use a secured connection
for e-mail service.
Email profile: select a connection profile to be
used for e-mail services. You can also create or
edit a profile.p. 93
Menu functions
- Use SMTP authentication: enable SMTP
authentication, which requires the user to login
before sending e-mails.
- Same as POP3: select if you want the SMTP
server to have the same parameters as the POP3
server.
- SMTP user ID: enter the SMTP user name.
- SMTP password: enter the SMTP password.
- APOP login: connect to the server by using the
APOP login scheme.
- Secure connection: use a secure connection for
the e-mail service.
When the protocol type is IMAP4:
- IMAP4 server: enter the IP address or host
name of the server that receives your e-mail.
- IMAP4 port: enter the IMAP4 port number.
- User ID: enter the IMAP4 user name.
- Password: enter the IMAP4 password.
- Use SMTP authentication: enable SMTP
authentication, which requires the user to login
before sending e-mails.
Push messages (Menu 5.5.4)
You can change the settings for receiving push
messages from the wireless web server.
• Receive: set how your phone receives push
messages. If you select Black list, the phone will
not accept messages from the specified addresses
on the Black list.
65
Menu functions
•
Black list: manage blocked server addresses.
Broadcast messages (Menu 5.5.5)
You can change the settings for receiving broadcast
messages.
• Receive: select to receive broadcast messages, or
not.
• Channel list: indicate the channels from which
you wish to receive broadcast messages. Please
contact your service provider for further details.
• Language: select the preferred languages in
which broadcast messages display.
Memory status (Menu 5.6)
Use this menu to view the amount of memory
currently in use in each message folder.
66
My files
(Menu 6)
The My files menu allows you to access images,
videos, music files, and sound clips stored in the
phone’s memory.
To access this menu, press <Menu> in Idle mode and
select My files.
Tips for Digital Rights Management
As a result of the Digital Rights Management (DRM)
system, some of the media items you download from
the Internet or receive by MMS may require a licence
key to access them.
You can acquire the key from the website which owns
the rights to the content; use the Activate key
option.
Note the following icons on the list:
•
: Forwardable item with a valid key.
•
: Forwardable item without a valid key.
•
: Unforwardable item with a valid key.
•
: Unforwardable item without a valid key.
Your service provider supports only count-based or
unlimited-access DRM files.
4. Press <Stop> to stop the slide show.
Images (Menu 6.1)
While viewing an image, press <Options> to access
the following options:
• Full screen view: view the image on the full
screen.
• List: return to the image list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the image as wallpaper for the display
or as a caller ID image for a Phonebook entry.
• Edit: edit the image using the Image editor if it is
a photo taken by the camera on the phone.
p. 42
• Activate key: get a new licence key when the key
for the selected DRM file expires.
• Delete: delete the file.
• Rename: change the file name.
• Move to Favourite images/Move to Photos:
move the file to another folder.
Viewing an image
Viewing a slide show
You can view your photos as a slide show, a sequential
presentation of each photo in the current folder.
1. Select My photos.
2. Press <Options> and select Slide show.
3. Select an interval option. The slide show begins.
My files (Menu 6)
1. Select an image folder.
2. Select an image.
You can view the enlarged image by pressing
[Volume up]. To zoom in or out, press [Volume].
Press the Navigation keys to scroll through the
image.
Menu functions
This menu displays photos you have taken and images
you have downloaded, received in messages, or
imported from a computer.
Using image options
67
Menu functions
•
•
•
•
•
Bluetooth visibility: share the file or all files with
other Bluetooth devices.
Protection: protect the file from being deleted.
Print via Bluetooth: print the image via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
Videos (Menu 6.2)
This menu displays video clips you have recorded,
downloaded, received in messages, or imported from
a computer.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
Playing a video clip
1. Select a video folder.
2. Select a video clip.
68
During playback, use the following keys:
Key
Function
Pauses or resumes playback.
Left
Returns to the previous file. Moves
backward in a file when held down.
Right
Skips to the next file. Moves forward
in a file when held down.
Up
Opens the video list.
Volume
Adjusts the volume.
Down
Stops playback.
Using video options
After playback, press <Options> to access the
following options:
• Full screen: play the video clip on the full screen.
• List: return to the video list.
•
•
•
•
•
•
•
•
This menu displays music files you have downloaded
or imported from a computer.
Select a file. The music player opens.p. 39
When you play a file from this menu, without first
adding it to the play list in the music player,
background play is not supported.
Sounds (Menu 6.4)
My files (Menu 6)
•
Music (Menu 6.3)
Menu functions
•
Send via: send the file via MMS, e-mail, or
Bluetooth.
Set as: set the video clip, if saved as a 3GP file, as
wallpaper for the display or caller image.
Activate key: get a new licence key when the key
for the selected DRM file expires.
Delete: delete the file.
Rename: change the file name.
Move to Favourite videos/Move to Video clips:
move the file to another video folder.
Bluetooth visibility: share the file or the files you
want with other Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
This menu displays voice memos you have recorded,
and sound clips you have downloaded, received in
messages, or imported from a computer.
Playing a sound clip
1. Select a sound folder.
2. Select a sound clip. For a voice memo, see Voice
recorder.p. 41
69
Menu functions
Using sound options
While playing a sound clip, press <Options> to
access the following options:
• List: return to the sound list.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the file as your ringtone or as a
ringtone for a Phonebook entry.
• Activate key: get a new licence key when the key
for the selected DRM file expires.
• Delete: delete the file.
• Rename: change the file name.
• Move to Favourite sounds/Move to
Downloaded sounds: move the file to another
sound folder.
• Bluetooth visibility: share the file or the files you
want with other Bluetooth devices.
• Protection: protect the file from being deleted.
70
•
•
Details: access the file properties.
Key management: manage the licence keys you
have acquired.
Other files (Menu 6.5)
Use this menu to view, without corruption, various
document files and files stored in the phone’s memory.
Available file formats are DOC, XLS, PPT, PDF, and TXT.
Viewing a document
Select a document. Picsel File Viewer runs to open the
document.
• Depending on the file size or memory capacity of
Picsel File Viewer, some files may not open
properly.
• If a document file contains languages
unsupported by Picsel File Viewer, the content of
the document will not display correctly.
Use the following keys to view the document:
Function
Up/Down
/Left/Right
Pans around the page.
Fits the document to the page
size.
Zooms in.
2
Returns to the first page.
3/Volume down
Zooms out.
4
Returns to the previous page.
5
Rotates the document.
6
Moves to the next page.
8
Moves to the last page.
Changes the display to Full
screen view or Normal screen
view.
My files (Menu 6)
1/Volume up
While viewing a document, press <Options> or
< > to access the following options:
• Full screen view/Normal view: change the view
mode.
• Zoom: zoom in or out.
• Fit to: fit the document to the page size, screen
width, or screen height.
• Go to: move to another page of the document.
• Rotate: rotate the document.
• Screen panning/Normal panning: change the
panning mode to by screen or by preset pixel.
• Show controller/Hide controller: show or hide
the shortcut tool bar of the Picsel file viewer.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Delete: delete the selected file.
• Rename: change the file name.
Menu functions
Key
Using document options
71
Menu functions
•
•
•
•
Bluetooth visibility: share the file or the files you
want with other Bluetooth devices.
Protection: protect the file from being deleted.
Details: access the file properties.
Shortcuts: view the functions of the keys you can
use in Picsel File Viewer.
Memory status (Menu 6.6)
Use this menu to view memory information for media
items in the phone’s memory. Press [Left] or [Right] to
view the memory status by size or number of items.
You can also access a media box by selecting it from
this menu.
Calendar (Menu 7)
The Calendar menu enables you to keep track of your
schedule.
To access this menu, press <Menu> in Idle mode and
select Calendar.
Selecting a day on the calendar
When you enter the Calendar menu, the calendar in
Month view appears with today’s date indicated by a
gray box.
• Press [Left] or [Right] to move by day.
• Press [Up] or [Down] to move by week.
• Press [Volume] to move by month.
Creating an item
You can store appointments, anniversaries, memos,
and tasks on the calendar. More than one item per day
can be stored.
72
Entering an appointment
•
•
Alarm tone: select an alarm tone.
Repeat: set the appointment to recur and
select a repeat option.
• Until: set the ending date, if the appointment
will recur.
4. Press <Save> to save the appointment.
Menu functions
Entering an anniversary
1. Select a date on the calendar.
2. Press <Options> and select Create →
Anniversary.
3. Enter information or change the settings:
• Occasion: enter information about the
anniversary.
• Date: enter the date.
• Alarm: select to set an alarm for the
anniversary.
• Before: set how long before the anniversary
the alarm is to alert you.
• Alarm time: enter the time for the alarm to
ring.
Calendar (Menu 7)
1. Select a date on the calendar.
2. Press <Options> and select Create →
Appointment.
3. Enter information or change the settings:
• Subject: enter a title for the appointment.
• Details: enter the appointment details.
• Start date and Start time: enter the starting
date and time for the appointment.
• AM/PM: select AM or PM in 12-hour time
format.
• End date and End time: enter the ending date
and time for the appointment.
• AM/PM: select AM or PM in 12-hour time
format.
• Location: enter information about the
appointment location.
• Alarm: set an alarm for the appointment.
• Before: set how long before the appointment
the alarm is to alert you.
73
Menu functions
•
AM/PM: select AM or PM in 12-hour time
format.
• Alarm tone: select an alarm tone.
• Repeat every year: set the phone to remind
you of the anniversary every year.
4. Press <Save> to save the anniversary.
Entering a memo
1. Select a date on the calendar.
2. Press <Options> and select Create → Memo.
3. Enter a memo and press <Save>.
Entering a task
1. Select a date on the calendar.
2. Press <Options> and select Create → Task.
3. Enter information or change the settings:
• Task: enter information about the task.
• Start date: enter the starting date.
• Due date: enter the ending date.
• Select priority: select a priority level.
4. Press <Save> to save the task.
74
Consulting the calendar
Once you have created items, the item icons and the
number of items for a specific day appears at the
bottom of the calendar.
•
Appointment
•
Anniversary
•
Task
•
Memo
Viewing an item
1. Select a date on the calendar to display the items
for the day.
2. Select an item to view its details.
3. Press [Left] or [Right] to access the other items
scheduled for the selected day.
While viewing an item, press <Options> to access
the following options:
• Edit: edit the item.
• Create: add a new item.
• Send via: send the item via SMS, MMS, e-mail, or
Bluetooth.
• View by: change the view mode of the calendar.
•
•
Delete: delete the item.
Memory status: access memory information for
the items stored on the calendar.
You can delete recurring items in Day view only.
•
•
Missed alarm events: view items whose alarms
you have missed.
Memory status: access memory information for
the items stored on the calendar.
Day view
You can view items for the selected date. Select an
item to view its details.
The following icons may display to indicate the item
status:
•
Alarm set
•
Recurring item
•
Task priority (Red: high, Blue: normal,
Grey: low)
•
Completed task
Calendar (Menu 7)
On the calendar, press <Options> to access the
following options:
• View by: change the view mode of the calendar.
• Create: add a new item.
• Go to: select today’s date or enter a specific date.
• Event list: sort items by type of item.
• Delete: delete the items stored on the calendar by
using various deleting options.
You can change the calendar display to Day view or
Week view. Press <Options> and select View by →
a view mode.
Menu functions
Using calendar options
Viewing items in a different mode
Week view
You can view items for the selected week. A cell on the
timetable indicates the presence of a schedule item.
Select a cell in the day you want.
75
Menu functions
Camera (Menu 8)
You can use the camera module embedded in your
phone to take photos and record videos.
To access this menu, press <Menu> in Idle mode and
select Camera, or press and hold [Camera].
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras are
not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
Taking a photo
You can take photos in various modes. The camera
produces JPEG photos.
When you take a photo in direct sunlight or in bright
conditions, shadows may appear on the photo.
Taking a photo
1. Access the Camera menu or press and hold
[Camera] to turn on the camera.
76
2. Make any desired adjustments.
• Press < > to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 78
3. Press [ ] or [Camera] to take a photo. The photo
is saved in the My photos folder.
4. To
Press
access photo options
<Options>.p. 78
delete the photo
[C] and then <Yes>.
return to Capture mode
<Preview>.
Using camera options in Capture mode
In Capture mode, press < > to access the following
options:
• Record video: switch to Record mode.
• Shooting mode: take a photo in the following
modes:
•
•
•
Camera (Menu 8)
•
•
Scene programs: set whether or not to use Night
shot mode.
Shutter sound: select the sound that you hear
when you press the shutter release key, [ ] or
[Camera].
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
White balance: adjust the colour balance of the
image. You can make your photo appear warmer
or cooler.
ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light situations,
select a higher ISO number. The higher the ISO
number, the faster the camera shutter functions
and the more sensitive the camera is to light.
Higher ISO settings may bring some distortion to
an image.
Camera shortcuts: view the functions of the keys
you can use in Capture mode.
Menu functions
•
Single shot: take a photo in Normal mode. You
can select whether or not the camera automatically
saves a photo.
Multi-shot: take a series of action stills. You can
select the number of photos the camera will take
and the shooting speed.
Mosaic shot: take several stills and save them in
one frame. You can select the layout.
Effects: change the colour tone or apply a special
effect.
Frames: apply a decorative frame.
Timer: set a time delay before the camera takes a
photo.
Go to My photos: access the My photos folder.
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality setting.
Viewfinder: select a preview screen.
77
Menu functions
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
78
Key
Function
Left/Right
Adjusts the image brightness.
Up/Down
Zooms in or out.
Volume up
Flips the image vertically.
Volume down
Shows the mirror image.
1
Switches to Record mode.p. 79
2
Changes the image size.
3
Changes the image quality.
4
Changes the shooting mode.
5
Changes the colour tone or applies a
special effect.
6
Changes the white balance.
7
Selects a decorative frame.
Key
Function
8
Sets the timer.
9
Changes the ISO setting.
Switch to Night shot mode.
0
Goes to the My photos folder.
Changes the preview screen.
Using photo options
After saving a photo, press <Options> to access the
following options:
• View: access one of the multi-shot photos.
• Viewfinder: returns to Capture mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
• Set as: set the photo as wallpaper for the display
or as a caller ID image for a Phonebook entry.
• Edit: edit the photo by using various tools.
p. 42
•
•
•
•
You can record a video of what is displayed on the
camera screen and save it.
Recording a video
1. In Capture mode, press [1].
2. Make any desired adjustments.
• Press < > to access camera options.
next section
• Use the keypad to change the camera settings
or switch to other modes.p. 80
5. To
Press
play back the video clip
[ ].
access video options
<Options>.p. 81
delete the video clip
[C] and then <Yes>.
return to Record mode
<Preview>.
Camera (Menu 8)
Recording a video
3. Press [ ] or [Camera] to start recording.
4. Press [ ], < >, or [Camera] to stop recording.
The video is automatically saved in the My video
clips folder.
Menu functions
•
•
Delete: delete the file.
Rename: change the file name.
Go to My photos: access the My photos folder.
p. 67
Protection: protect the file from being deleted.
Print via Bluetooth: print the photo via a
Bluetooth-compatible printer. Some printers may
not be compatible with the phone.
Details: access the file properties.
Using camera options in Record mode
In Record mode, press < > to access the following
options:
• Take photo: switch to Capture mode.
• Effects: change the colour tone or apply a special
effect.
• Timer: set a time delay before the camera starts
recording.
79
Menu functions
•
•
80
Go to My video clips: access the My video clips
folder.
Settings: change the following settings for
recording a video:
Recording mode: select a video recording mode.
Select Normal to record a video within the limit of
the currently available memory. The video clip is
saved in MP4 format.
Select Limit for multimedia messages/
wallpaper to record a video suitable for
messaging or for setting as wallpaper or caller ID
image. The video clip is saved in 3GP format.
Size: select a frame size.
Quality: select an image quality setting.
Viewfinder: select a preview screen.
Record audio: record a video clip with audio.
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
•
White balance: adjust the colour balance of the
image. You can make your video appear warmer or
cooler.
Camcorder shortcuts: view the functions of the
keys you can use in Record mode.
Using the keypad in Record mode
You can use the keypad to customise your camera
settings in Record mode.
Key
Function
Left/Right
Adjusts the image brightness.
Up/Down
Zooms in or out.
Volume up
Flips the image vertically.
Volume down Shows the mirror image.
1
Switches to Capture mode.p. 76
2
Changes the frame size.
3
Changes the image quality.
•
4
Changes the video recording mode.
5
Changes the colour tone or applies a
special effect.
•
•
•
6
Changes the white balance.
7
Mutes or unmutes audio.
8
Sets the timer.
0
Goes to the My video clips folder.
•
•
Set as: set the video clip, if saved as a 3GP file, as
wallpaper for the display or the caller image.
Delete: delete the file.
Rename: change the file name.
Go to My video clips: access the My video clips
folder.p. 68
Protection: protect the file from being deleted.
Details: access the file properties.
Camera (Menu 8)
Function
Menu functions
Key
Changes the preview screen.
Using video options
After saving a video clip, press <Options> to access
the following options:
• Full screen: play the video clip on the full screen.
• Record another: return to Record mode.
• Send via: send the file via MMS, e-mail, or
Bluetooth.
81
Menu functions
Settings (Menu 9)
Phone settings (Menu 9.2)
The Settings menu provides you with various setting
options to customise the phone to your preferences
and needs. You can also reset the settings to their
default status.
Many different features of your phone’s system can be
customised to suit your preferences.
To access this menu, press <Menu> in Idle mode and
select Settings.
Time and date (Menu 9.1)
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in the World clock menu.
p. 44
• Set time: enter the current time.
• AM/PM: select AM or PM in 12-hour time format.
• Time format: select a time format.
• Set date: enter the current date.
• Calendar starting day: set which day of the
week the calendar starts with.
• Auto update: select to receive time information
from your network.
82
Some menus may not be available, depending on
your service provider.
Language (Menu 9.2.1)
Use this menu to select a language for the display
text. If you select Automatic, the phone uses the
same language as the SIM card.
Greeting message (Menu 9.2.2)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Shortcuts (Menu 9.2.3)
You can use the Navigation keys as shortcuts to access
specific menus directly from Idle mode. Use this menu
to assign a shortcut to a key.
Assigning a shortcut menu
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
Using shortcut options
Auto keypad lock (Menu 9.2.4)
Volume key (Menu 9.2.5)
Use this menu to set whether the phone mutes the call
ringer or rejects a call if you press and hold [Volume]
when a call comes in.
Extra settings (Menu 9.2.6)
You can turn the automatic redialling or answering
feature on or off.
• Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
Anykey answer: answer an incoming call by
pressing any key, except for <Reject> and [ ].
Offline mode (Menu 9.2.7)
Use this menu to switch the phone to Offline mode or
back to Online mode.
Display settings (Menu 9.3)
Use this menu to change settings for the display.
Wallpaper (Menu 9.3.1)
Settings (Menu 9)
Use this menu to set the phone to lock the keypad
automatically when the display turns off.
•
Menu functions
Press <Options> to access the following options:
• Change: assign or change a shortcut menu.
• Remove: deactivate the shortcut assignment to
the selected key.
• Remove all: deactivate all shortcut assignments.
You can set up the idle screen on the display.
• Wallpaper image: select an image or a video clip
to be displayed on the display.
• Text position: select a text position. If you do not
want to display text in Idle mode, select Off.
• Text mode: select a font style.
• Text colour: select a font colour.
• Graphic logo: set the phone to display a graphic
icon instead of the service provider’s logo on the
idle screen. This is only available if a graphic icon
has been received in a message.
83
Menu functions
Skin (Menu 9.3.2)
Sound settings (Menu 9.4)
You can select a skin colour pattern for Menu mode.
Use this menu to customise various sound settings.
Brightness (Menu 9.3.3)
Incoming call (Menu 9.4.1)
You can adjust the brightness of the display for
varying lighting conditions.
Use this menu to change the sound settings for
incoming calls.
• Ringtone: select a ringtone to be used for the call
ringer.
• Volume: select a ringtone volume.
• Alert type: specify how you are to be informed of
incoming calls.
Dialling display (Menu 9.3.4)
Use this menu to select a font type, a colour and size
for the numbers entered, and background colour of
the display while dialling.
Show caller information (Menu 9.3.5)
Use this menu to set the phone to display missed call
notifications with the most recently missed caller’s
information.
TV-out settings (Menu 9.3.6)
Use this menu to select a video system for a TV.
Keypad tone (Menu 9.4.2)
Use this menu to select the tone that the phone
sounds when you press a key.
You can adjust the key tone volume using [Volume]
in Idle mode.
Message tone (Menu 9.4.3)
Use this menu to change the sound settings for
incoming SMS messages, MMS messages, e-mails,
and broadcast messages individually.
84
•
•
•
•
Alerts on call: set the phone to beep when you
receive a new message or when the time for an
alarm comes during a call.
Indicative tone: set the phone to beep when a
pop-up window displays.
Power on/off (Menu 9.4.4)
Light settings (Menu 9.5)
Use this menu to select the melody that the phone
sounds when it is switched on or off.
Use this menu to change settings for the light.
Use this menu to set how the phone acts to alert you
to a specific event while in Silent mode.
Extra tones (Menu 9.4.6)
Use this menu to customise additional tones for the
phone.
• Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
• Connection tone: set the phone to beep when an
outgoing call connects to the system.
Backlight time (Menu 9.5.1)
Settings (Menu 9)
Silent mode (Menu 9.4.5)
Menu functions
•
Tone: select one of the several message tones.
Alert type: specify how you are to be informed
when a message comes in.
Repetition: specify how often the phone informs
you of a new message.
You can select the length of time the backlight or
display stays on.
• Main display normal: select the length of time
the backlight stays on.
• Main display dim: select the length of time the
display stays on in Dim mode after the backlight
turns off. After a specified time, the display turns
off.
85
Menu functions
Keypad light (Menu 9.5.2)
Use this menu to set how the phone controls the use
of the keypad light. Select one of the following options
in the Use at line.
• Any time: the keypad light is always used.
• Night time: the keypad light is used only between
5:00 PM and 9:00 AM.
• Custom time: you can specify the time period
that the keypad light is used.
Network services (Menu 9.6)
Use this menu to access network services. Yo can
contact your service provider to check their availability
and subscribe to them, if you wish.
•
2.
3.
4.
5.
6.
Call diverting (Menu 9.6.1)
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
• Divert always: divert all calls.
86
7.
Busy: divert calls when you are on another
call.
• No reply: divert calls when you do not answer
the phone.
• Unreachable: divert calls when you are not in
your service area or when your phone is
switched off.
• Cancel all: cancel all call diverting options.
Select the type of calls to be diverted.
Select Activate. To deactivate call diverting, select
Deactivate.
Move to the Divert to line.
Enter the number to which calls are to be diverted.
If you selected No reply, move to the Seconds
line and select the length of time the network
delays before diverting a call.
Press <Select>.
Call barring (Menu 9.6.2)
4. Enter the call barring password supplied by your
service provider and press <Select>.
Call waiting (Menu 9.6.3)
Menu functions
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which call waiting option
will apply.
2. Select Activate. To deactivate call waiting, select
Deactivate.
Settings (Menu 9)
This network service allows you to restrict your calls.
1. Select a call barring option:
• All outgoing calls: prohibit all outgoing calls.
• International: prohibit international calls.
• International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home service area.
• All incoming calls: prohibit incoming calls.
• Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home service area.
• Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
• Change barring password: change the call
barring password obtained from your service
provider.
2. Select the type of calls to be barred.
3. Select Activate. To deactivate call barring, select
Deactivate.
Network selection (Menu 9.6.4)
This network service allows you to manually select the
network to be used while roaming outside of your
home area, or to let the network be chosen
automatically.
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
87
Menu functions
Caller ID (Menu 9.6.5)
Closed user group (Menu 9.6.7)
This network service allows you to hide your phone
number from the person you are calling. If you select
Default, the phone will use the default setting
provided by the network.
Use this menu to set incoming and outgoing calls to be
restricted to a selected user group. For details about
how to create a closed user group (CUG), contact your
service provider.
• Index list: add, delete, or activate CUG index
numbers.
• Outside access: enable calls to numbers other
than those in the closed user group. This feature
depends on the nature of your CUG subscription.
• Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from the
list.
Some networks may not allow you to change this
setting.
Voice mail server (Menu 9.6.6)
Use this menu to store the number of the voicemail
server and access your voicemails.
You must store the voicemail server number before
accessing the server. Your service provider can give
you the number.
•
•
88
Connect to voice server: connect to the
voicemail server to listen to your messages.
Voice server number: enter the voicemail server
number.
The Bluetooth menu provides the following options:
• Activation: activate or deactivate the Bluetooth
feature.
• My devices: search for connectable Bluetooth
devices.
• My phone’s visibility: allow other Bluetooth
devices to search for your phone.
• My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
• Secure mode: determine if the phone asks for
your confirmation when other devices access your
data.
• Bluetooth services: display available Bluetooth
services.
Bluetooth technology allows free wireless connections
between all Bluetooth-compliant devices within a
range of 10 meters. Since the devices communicate
using radio waves, they do not need to be in line of
sight to each other.
• If there are obstacles between the devices, the
operating distance may be reduced.
• It is recommended that you do not use the
Bluetooth feature while using multimedia
features, such as voice recorder, camera, and
music player, or vice versa, for better
performance.
• Some devices may not be compatible with your
phone.
Settings (Menu 9)
Setting up the Bluetooth feature
Using the Bluetooth feature, you can connect the
phone wirelessly to other Bluetooth devices and
exchange data with them, talk hands-free, or control
the phone remotely.
Menu functions
Bluetooth (Menu 9.7)
89
Menu functions
Searching for and pairing with a Bluetooth
device
1. From the Bluetooth menu, select My devices.
2. Select Search for new devices.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
type of device:
Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth PIN, such as 0000.
If the other device has a code, you must enter it.
•
Stereo headset
•
PDA
•
Mobile phone
•
Unknown device
Using device options
•
Computer
•
Printer
•
Mono headset/
Hands-free car kit
From the device list, press <Options> to access the
following options:
• Connect: connect to a headset or hands-free car
kit.
• Disconnect: end the connection with the
connected device.
• Browse files: search for data from the device and
import data directly to your phone.
• Service list: access the Bluetooth service list of
the device.
• Rename: rename the paired device.
The colour of the icon indicates the status of the
the device:
• Grey for unpaired devices
• Blue for paired devices
• Orange for devices that are currently
connected to your phone
3. Select a device.
90
4. Enter a Bluetooth PIN and press <OK>. This code
is used just once and you do not need to memorise
it.
When the owner of the other device enters the
same code, pairing is complete.
•
Sending data via Bluetooth
To receive data via Bluetooth, your phone’s Bluetooth
feature must be active and its visibility must be
enabled.
1. If an unauthorised Bluetooth device sends data to
your phone, press <Yes> to allow the device to
access your phone.
2. Press <Yes> to receive data.
Security (Menu 9.8)
Settings (Menu 9)
1. Activate the Bluetooth feature.
2. Select the application in which the item you want
to send is stored.
3. Scroll to the item you want and press <Options>.
4. Select Send via → Bluetooth.
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
Receiving data via Bluetooth
Menu functions
•
Authorise device/Unauthorised device:
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
Delete: remove the selected device or all devices
from the list.
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three times, the
SIM card is blocked. To unblock it, you need to enter
your PUK/PUK2 (Personal Unblocking Key). The
codes are supplied by your service provider.
91
Menu functions
PIN check (Menu 9.8.1)
Privacy (Menu 9.8.5)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Use this menu to lock access to messages, media files,
or all menu functions on the phone, except for call
functions.
Change PIN code (Menu 9.8.2)
Use this menu to change your PIN. The PIN check
feature must be enabled to change the PIN.
Phone lock (Menu 9.8.3)
Use this menu to lock the phone from unauthorised
use.
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.8.4)
Use this menu to change your phone password.
92
When a privacy option is enabled, you must enter the
phone password to access the locked items or
functions.
SIM lock (Menu 9.8.6)
This menu allows your phone to work only with the
current SIM by assigning a SIM lock code. You must
enter the SIM lock code to use a different SIM card.
Fixed dialling mode (Menu 9.8.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Change PIN2 code (Menu 9.8.8)
If supported by your SIM card, use this menu to
change your current PIN2.
Connection settings (Menu 9.9)
Creating a profile
1. Press <New>. If a profile has already been saved,
press <Options> and select Add new
connection.
2. Specify profile parameters:
• Profile name: enter a profile name.
• Homepage URL: enter the URL address of the
page to be used as your homepage.
• Proxy: activate or deactivate the proxy server.
• IP address: enter the IP address of the proxy
server.
•
•
•
•
•
Port: enter the port number of the proxy
server.
Linger time: set a time period after which the
network is disconnected if there has been no
new data traffic in that time.
DNS: activate or deactivate the DNS (Domain
Name Server) addresses.
DNS 1 and DNS 2: enter the primary and
secondary DNS addresses.
Bearer: select the network bearer type.
Advanced settings: change the advanced
options. Depending on the bearer setting,
available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the bearer is set to GSM:
Dial number: enter the PPP phone number.
Login ID: enter the login ID.
Password: enter the login password.
Settings (Menu 9)
Your phone is set up by default for connecting to the
network. If you change the settings without first
checking with your service provider, the web
browser, MMS, and e-mail features may not work
properly.
•
Menu functions
Use this menu to create and customise the profiles
containing the settings for connecting your phone to
the network. You need these settings to use the web
browser or send MMS messages or e-mails.
93
Data call type: select a call type for data
transmission.
3. Press <Save> to save the profile.
Using profile options
Press <Options> to access the following options:
• Edit: edit the selected profile.
• Delete: delete the profile.
• Add new connection: add a new profile.
Reset settings (Menu 9.10)
Use this menu to reset the phone’s settings you have
changed.
1. Press [ ] to select the setting categories to be
reset.
2. Press <Reset>.
3. Press <Yes> to confirm the reset.
4. Enter the phone password and press <OK>.
The password is preset to 00000000. You can
change this password.p. 92
94
Solve problems
Help and personal needs
To save the time and expense of an unnecessary
service call, perform the simple checks in this section
before contacting a service professional.
When you switch on your phone, the following
messages may appear:
“Insert SIM”
• Be sure that the SIM card is correctly installed.
“Enter password”
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
• You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
• The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
“Enter PUK”
• The PIN has been entered incorrectly three times,
and the SIM card is now blocked. Enter the PUK
supplied by your service provider.
•
“No service,” “Network failure,” or “Not done”
displays
• The network connection has been lost. You may be
in a weak signal area. Move and try again.
• You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
Your correspondent cannot hear you speaking
• Be sure that you have switched on the
microphone.
• Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
Your correspondent cannot reach you
• Be sure that your phone is switched on. ([
pressed for more than one second.)
]
Solve problems
You have entered a number but it was not dialled
• Be sure that you have pressed [ ].
• Be sure that you have accessed the right cellular
network.
• Be sure that you have not set an outgoing call
barring option.
•
Be sure that you are accessing the correct cellular
network.
Be sure that you have not set an incoming call
barring option.
The phone starts beeping and “Warning. Low
battery” flashes on the display
• Your battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
95
No number is dialled when you re-call a
Phonebook entry
• Use the Contact list menu to ensure the number
has been stored correctly.
• Re-store the number, if necessary.
The battery does not charge properly or the
phone sometimes turns itself off
• Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
If the above guidelines do not help you to solve
the problem, take note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
Health and safety information
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured to not exceed the limits for
exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines
were developed by independent scientific organisations
through the periodic and thorough evaluation of scientific
studies. The limits include a substantial safety margin
designed to ensure the safety of all persons, regardless of
age and health.
The exposure standard for mobile phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the EU Council is
2.0W/kg.*
The highest SAR value for this model phone was
0.639W/kg.
96
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health and
safety of the user and any other person.
Precautions when using batteries
Never use a charger or battery that is damaged in any
way.
•
•
•
•
•
* The SAR limit for mobile phones used by the public is 2.0 watts/
kilogram (W/kg) averaged over ten grams of body tissue. The limit
incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements. The SAR values may vary, depending on national
reporting requirements and the network band.
Use the battery only for its intended purpose.
If you use the phone near the network’s base station,
it uses less power. Talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
Battery charging time depends on the remaining
battery charge, the type of battery, and the charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out. When
the operation time is noticeably shorter than normal, it
is time to buy a new battery.
If left unused, a fully charged battery will discharge
itself over time.
Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers.
Disconnect the charger from the power source when it
is not in use. Do not leave the battery connected to a
charger for more than a week, since overcharging may
shorten its life.
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple
power levels so as to use only the power required to reach
the network. In general, the closer you are to a base
station, the lower the power output of the phone.
97
Health and safety information
•
•
•
•
98
Extreme temperatures will affect the charging capacity
of your battery: it may require cooling or warming
first.
Do not leave the battery in hot or cold places because
the capacity and lifetime of the battery will be
reduced. Try to keep the battery at room temperature.
A phone with a hot or cold battery may not work
temporarily, even when the battery is fully charged.
Li-ion batteries are particularly affected by
temperatures below 0°C (32°F).
Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object like a coin,
clip or pen causes a direct connection between the +
and – terminals of the battery (metal strips on the
battery). For example, do not carry a spare battery in
a pocket or bag where the battery may contact metal
objects. Short-circuiting the terminals may damage
the battery or the object causing the short-circuiting.
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When you are driving a car, driving is your first
responsibility. When using your wireless phone while
driving, follow local regulations in the country or region
you are in.
Operating environment
Remember to follow any special regulations in force in the
area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may cause
interference or danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Other medical devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Pacemakers
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do so.
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research. If you
have any reason to suspect that interference is taking
place, switch off your phone immediately.
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Health and safety information
Electronic devices
Your physician may be able to assist you in obtaining this
information.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted notices
require you to do so.
99
Health and safety information
Potentially explosive environments
Emergency calls
Switch off your phone when in any area with a potentially
explosive atmosphere, and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
This phone, like any wireless phone, operates using radio
signals, wireless, and landline networks as well as userprogrammed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications like medical emergencies.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are
in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include the areas
below decks on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas, such as
propane or butane, areas where the air contains chemicals
or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
100
To make or receive calls, the phone must be switched on
and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [
].
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
Care and maintenance
•
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
•
•
•
•
•
Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as the
phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that
an air bag inflates with great force. Do not place
objects, including installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. Improperly installed wireless
equipment could result in serious injury if the air bag
inflates.
Switch off your phone before boarding an aircraft. It is
dangerous and illegal to use wireless phones in an
aircraft because they can interfere with the operation
of the aircraft.
Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
•
•
•
•
•
Keep your phone and all its parts and accessories out
of the reach of small children and pets. They may
accidentally damage these things or choke on small
parts.
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the
phone.
Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt certain
plastics.
Health and safety information
Other important safety information
101
Health and safety information
•
•
•
•
•
•
•
102
Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature,
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with a
soft cloth slightly dampened in a mild soap-and-water
solution.
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
Do not put the phone in or on heating devices, such as
a microwave oven, stove, or radiator. The phone may
explode when overheated.
When the phone or battery gets wet, the label
indicating water damage inside the phone changes
colour. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even if
the warranty for your phone has not expired.
If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may cause
damage to their eyes.
•
•
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
If the phone, battery, charger, or any accessory is not
working properly, take it to your nearest qualified
service facility. The personnel there will assist you, and
if necessary, arrange for service.
Index
A
AB mode, text input • 25
Alarm • 45
Answering
call • 28
second call • 29
Anykey answer • 83
Auto redial • 83
B
Background image • 83
Backlight, set
display • 85
keypad • 86
Barring, calls • 87
Battery
charging • 7
low indicator • 8
precautions • 97
Bluetooth
receiving, data • 91
sending, data • 91
settings • 89
Broadcast messages • 57, 66
Browser, web • 48
C
Calculator • 46
Calendar • 72
Call cost • 33
Call log
dialled • 32
missed • 32
received • 32
Call time • 32
Caller groups • 35
Caller ID • 84, 88
Calls
answering • 28
barring • 87
diverting • 86
holding • 29
redialling • 28
rejecting • 28
transferring • 31
waiting • 87
Camera
photos • 76
videos • 79
CB (Cell Broadcast) messages •
57, 66
Characters, enter • 25
Configuration messages • 55
Connection tone • 85
Converter • 46
Creating messages
e-mail • 54
MMS • 52
SMS • 51
CUG (Closed User Group) • 88
D
Date, set • 82
Deleting
call log • 31
e-mail • 58, 59, 60
events • 75
MMS • 56, 58, 60
phonebook • 34, 37
SMS • 56, 58, 60
Dialled calls • 32
Dialling font, set • 84
Display
brightness • 84
icons • 10, 11
language • 82
layout • 10
settings • 83
Diverting, calls • 86
Document files • 70
DRM (Digital Rights
Management) • 66
DTMF tones, send • 30
E
E-mails
creating/sending • 54
deleting • 59
setting • 63
viewing • 58
Emergency calls • 100
F
FDN (Fixed Dialling Number)
mode • 92
File manager • 66
File viewer • 70
G
Games • 44
Greeting message • 82
H
Health and safety • 96
Holding, call • 29
103
Index
I
Icons, description • 10, 11
Image editor • 42
Images, downloaded • 67
Inbox, messages
e-mail • 58
MMS/SMS • 55
International calls • 27
Internet • 48
J
Java applications • 44
K
Key tones
selecting • 84
sending/muting • 30
L
Language, select • 82
Last number, redial • 28
Light settings • 85
Locking
keys • 8
menu functions • 92
phone • 92
SIM card • 92
Low battery indicator • 8
104
M
Memory status
downloaded items • 72
file manager • 72
messages • 66
phonebook 37
Message tone • 84
Messages
cell broadcast • 57, 66
configuration • 56
e-mail • 54, 58
greeting • 82
MMS • 52, 56
push • 57, 65
SMS • 51, 56
Minute minder • 85
Missed calls • 32
MMS messages
creating/sending • 52
deleting • 56
setting • 62
viewing • 55
Multiparty-call • 31
Music player • 38
Music, downloaded • 69
My files • 66
N
Name card • 36
Names
entering • 25
searching • 33
Network band, select • 89
Network selection • 87
Network services • 86
Numbers
searching • 33
storing • 34
O
Offline mode • 9, 83
Outbox, messages • 57
P
Password
call barring • 87
phone • 92
Phone
care and maintenance •
101
display • 10
icons • 10
locking • 92
password • 92
resetting • 94
switching on/off • 8
unpacking • 6
Phonebook
adding • 34
deleting • 34, 37
finding • 33
managing • 37
options • 34
speed dialling • 36
Photos
editing • 42
taking • 76
viewing • 67
PIN, change • 92
PIN2, change • 92
Power on/off tone • 85
Privacy • 92
Problems, solve • 94
Push messages • 57, 65
R
Received calls • 32
Received messages
e-mail • 58
MMS/SMS • 55
Recording
videos • 79
voice memos • 41
Redialling
automatically • 83
manually • 28
Speed dial • 36
Stopwatch • 47
Switching on/off
microphone • 30
phone • 8
S
T9 mode, text input • 26
Templates, message • 60
Text, enter • 25
Time, set • 82
Timer • 47
TV out
setting • 84
viewing on TV screen •
24
Safety
information • 96
precautions • 1
Security, calls • 91
Sent messages • 58
Shortcut • 82
Silent mode
entering • 14
setting • 85
SIM card
inserting • 7
locking • 92
Skin colour • 84
SMS messages
creating/sending • 51
deleting • 56
setting • 61
viewing • 55
Sound settings • 84
Sounds, downloaded • 69
Speakerphone • 30
T
Web browser
access • 48
bookmarks • 49
World time • 44
Index
Resetting phone • 94
Ringer
incoming calls • 84
messages • 85
Road safety • 98
Roaming • 87
V
Videos
playing • 68
recording • 79
Voice recorder
playing • 41
recording • 41
Voicemail server • 88
W
Waiting call • 87
Wallpaper • 83
105
* It is not the address of Samsung Service Centre. For the address or the phone number
of Samsung Service Centre, see the warranty card or contact the retailer where you
purchased your phone.
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
2006. 05. 11
Yong-Sang Park / S. manager
(place and date of issue) (name and signature of authorised person)
(Representative in the EU)
which will be made available upon request.
Samsung Electronics QA Lab.
The technical documentation kept at:
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark: 0168
The conformity assessment procedure referred to in Article 10 and
detailed in Annex[IV] of Directive 1999/5/EC has been followed with
the involvement of the following Notified Body(ies):
We hereby declare the [all essential radio test suites have been
carried out and that] the above named product is in conformity to all
the essential requirements of Directive 1999/5/EC.
to which this declaration relates, is in conformity with the following
standards and/or other normative documents.
Safety
: EN 60950-1:2001
EMC
: EN 301 489-01 v1.4.1 (08-2002)
: EN 301 489-07 v1.2.1 (08-2002)
: EN 301 489-17 v1.2.1 (08-2002)
SAR
: EN 50360:2001
EN 50361:2001
Network : EN 301 511 v9.0.2 (03-2003)
EN 300 328 v1.6.1 (11-2004)
(factory name, address*)
Samsung Electronics Co., Ltd, 94-1 Imsoo-Dong, Gumi City,
Kyung Buk, Korea, 730-350
Manufactured at:
(Model name)
SGH-X820
(Product description)
GSM900/GSM1800/GSM1900 with Bluetooth
Portable Cellular Telephone
For the following product:
Declaration of Conformity (R&TTE)
Download PDF