Samsung | SGH-T100 | Samsung SGH-T100 User Manual

DUAL BAND
GSM TELEPHONE
SGH-T100
OWNER’S MANUAL
ELECTRONICS
World Wide Web
www.samsungmobile.com
Printed in Korea
Code No.:GH68-02777A
Eng. 2002/03. Rev.1.0
GLOBAL SYSTEMS FOR
MOBILE COMMUNICATIONS
Contents
Safety Quick Guide . . . . . . . . . . . . . . . . . . . . . . . 5
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Phone Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Service Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . 15
Installing the SIM Card and the Battery . . . . . . . . . 15
Charging a Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Switching the Phone On/Off . . . . . . . . . . . . . . . . . . . 20
Using the Earmicrophone . . . . . . . . . . . . . . . . . . . . . . 21
Call Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . 24
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Viewing Missed Calls . . . . . . . . . . . . . . . . . . . . . . . . . 26
In-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Storing a Phone Number with a Name . . . . . . . . . . 35
Phonebook Options . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Speed-Dialling by SIM Memory Location . . . . . . . . 39
Searching for and Dialling a Number
in the Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Dialling a Number using the Service Directory
or Information Numbers . . . . . . . . . . . . . . . . . . . . . . 41
The information in this manual is believed to be correct at
the time of printing; Samsung reserves the right, however,
to change or modify any of the specifications
without notice. Some of the contents in this manual may
differ from your phone, depending on the software
installed, your SIM card or your service provider.
1
Contents (Continued)
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Voice Functions . . . . . . . . . . . . . . . . . . . . . . . . . 67
Changing Text Input Mode . . . . . . . . . . . . . . . . . . . . 43
English Mode (T9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
ABC Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Number Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Symbolic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Voice Dial (Menu 3-1) . . . . . . . . . . . . . . . . . . . . . . . . . 67
Voice Command (Menu 3-2) . . . . . . . . . . . . . . . . . . . . 70
Voice Memo (Menu 3-3) . . . . . . . . . . . . . . . . . . . . . . . 70
Selecting Functions and Options . . . . . . . . . . . . . 49
Using the Menu . . . . . . . . . . . . . . . . . . . . . . . . 51
Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Call Records . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Missed Calls (Menu 1-1) . . . . . . . . . . . . . . . . . . . . . . . 55
Received Calls (Menu 1-2) . . . . . . . . . . . . . . . . . . . . . 55
Dialled Calls (Menu 1-3) . . . . . . . . . . . . . . . . . . . . . . . 56
Call Time (Menu 1-4) . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Call Cost (Menu 1-5) . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Voice Mail (Menu 2-1) . . . . . . . . . . . . . . . . . . . . . . . . . 58
Read Messages (Menu 2-2) . . . . . . . . . . . . . . . . . . . . 59
Write Messages (Menu 2-3) . . . . . . . . . . . . . . . . . . . . 61
Preset Message List (Menu 2-4) . . . . . . . . . . . . . . . . 62
Setup (Menu 2-5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Broadcast (Menu 2-6) . . . . . . . . . . . . . . . . . . . . . . . . . 63
Picture Messages (Menu 2-7) . . . . . . . . . . . . . . . . . . 65
2
Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Ring Tone (Menu 4-1) . . . . . . . . . . . . . . . . . . . . . . . . . 72
Melody Composer (Menu 4-2) . . . . . . . . . . . . . . . . . . 73
Ring Volume (Menu 4-3) . . . . . . . . . . . . . . . . . . . . . . . 75
Alert Type (Menu 4-4) . . . . . . . . . . . . . . . . . . . . . . . . . 75
Keypad Tone (Menu 4-5) . . . . . . . . . . . . . . . . . . . . . . . 76
Message Tone (Menu 4-6) . . . . . . . . . . . . . . . . . . . . . 76
Error Tone (Menu 4-7) . . . . . . . . . . . . . . . . . . . . . . . . . 77
Minute Minder (Menu 4-8) . . . . . . . . . . . . . . . . . . . . . 77
Connect Tone (Menu 4-9) . . . . . . . . . . . . . . . . . . . . . . 77
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Phone Settings (Menu 5-1) . . . . . . . . . . . . . . . . . . . . . 78
Network Services (Menu 5-2) . . . . . . . . . . . . . . . . . . 84
Security Settings (Menu 5-3) . . . . . . . . . . . . . . . . . . . 94
LCD/LED Settings (Menu 5-4) . . . . . . . . . . . . . . . . . . . 97
Browser Settings (Menu 5-5) . . . . . . . . . . . . . . . . . . . 98
Organiser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Scheduler (Menu 6-1) . . . . . . . . . . . . . . . . . . . . . . . . . 99
Alarm (Menu 6-2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Calculator (Menu 6-3) . . . . . . . . . . . . . . . . . . . . . . . . 103
To Do List (Menu 6-4) . . . . . . . . . . . . . . . . . . . . . . . . 105
Calendar (Menu 6-5) . . . . . . . . . . . . . . . . . . . . . . . . . 106
World Time (Menu 6-6) . . . . . . . . . . . . . . . . . . . . . . . 107
Clock (Menu 6-7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
3
Contents (Continued)
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
AirShooting(Menu 7-1) . . . . . . . . . . . . . . . . . . . . . . . 110
SpaceWar(Menu 7-2) . . . . . . . . . . . . . . . . . . . . . . . . 111
MyPet(Menu 7-3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
WWW Services . . . . . . . . . . . . . . . . . . . . . . . . 113
Home(Menu 8-1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Bookmark(Menu 8-2) . . . . . . . . . . . . . . . . . . . . . . . . . 114
Goto(Menu 8-3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Navigating with the WAP Browser . . . . . . . . . . . . . 115
Entering Text, Numbers, or Symbols . . . . . . . . . . . 117
Network Connection Information . . . . . . . . . . . . . . 118
Additional Services . . . . . . . . . . . . . . . . . . . . . 119
ALS(Alternate Line Service) . . . . . . . . . . . . . . . . . . 119
Solving Problems . . . . . . . . . . . . . . . . . . . . . . 121
Reference Information . . . . . . . . . . . . . . . . . . . 124
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Health and Safety Information . . . . . . . . . . . . . . . . 127
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Quick Reference Card. . . . . . . . . . . . . . . . . . . . 149
Safety Quick Guide
Read these guidelines before using your wireless
phone. Failure to comply with these guidelines may
be dangerous or illegal. For more detailed safety
information, see “Health and Safety Information” on
page 127.
Road safety comes first
Do not use a hand-held phone while driving; park the
vehicle first.
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off on aircraft
Wireless phones can cause interference. Using them
on aircraft is both illegal and dangerous.
Switch off in hospital
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may get interference which
could affect performance.
Respect special regulations
Follow any special regulations in force in any area
and always switch off your phone whenever it is forbidden to use it, or when it may cause interference
or danger (in a hospital for example).
4
5
Safety Precautions
Unpacking
Radio frequency exposure information
The design of this phone complies with the EU
requirements for RF exposure. To maintain
compliance with the requirements, use the Samsung
supplied or approved accessory. Use of non-approved
accessories may violate the requirements.
Use sensibly
Use only in the normal position (to ear). Avoid
unnessary contact with the antenna when the phone
is switched on.
Your package contains the following items.
Phone
Travel Adapter
Batteries
Wearable
EarMIcrophone
Owner’s Manual
Accessories and batteries
Use only SAMSUNG-approved accessories and
batteries.
Use qualified service
Only qualified service personnel may install or repair
your phone.
PC Link for GSM
Ver1.0
Hand String
Downloading Cable
(Only for Download Image&Ringtone)
In addition, you can obtain the following accessories
for your phone from your local SAMSUNG dealer:
• Cigarette lighter adapter
• Hands-free car kit
• Standard and Extended batteries
6
• Data kit
7
Your Phone
Your Phone
Phone Layout
The following illustrations show the main elements
of your phone.
Antenna
Service light
earpiece
External display
Display
External speaker
Volume
During a call, adjusts
the earpiece volume.
In idle mode with the
phone open, the keys
adjust the key tone
volume.
To reject an incoming
call, press and hold
the volume key when
the phone is closed.
Key
Functions
Soft keys perform the functions indicated
by the text above them (in the bottom line
of the display).
In the menu facility, scroll through the
menu options and phonebook memory.
In idle mode, performs as a hot key to the
several menus respectively.
Microphone
8
9
Your Phone
Your Phone
Key
Functions (continued...)
Deletes characters from the display.
In idle mode, allows you quick access to
WWW services.
Display
Display Layout
The display comprises of three areas.
Makes or answers a call.
In idle mode, recalls the last number dialled.
In the menu facility, selects a menu function
or stores information that you have entered
(such as a name) in the phone or SIM
memory.
Icons
Text and
graphic area
Ends a call. Also switches the phone on and
off when pressed and held.
In the menu facility, returns to the idle
mode and cancels your input.
Enters numbers, letters and some special
characters.
Used for various purposes in different
functions.
When pressed and held down in idle mode,
the # key toggles the alert type from the
current alert type to vibraton.
10
Menu
PhoneBook
Soft key
indications
Area
Description
First line
Displays various icons (see below).
Middle lines
Display messages, instructions and
any information that you enter
(number to be dialled, for example).
Last line
Shows the functions currently
assigned to the two soft keys and
the divert icon.
11
Your Phone
Your Phone
Icons
Backlight
Signal strength : Shows the received
signal strength. The greater the number
of bars, the better the signal strength.
Service: Appears when a call is in
progress.
New Message: Appears when a new
text message has been received.
New Voice Mail: Appears when a new
voice mail message has been received.
Vibrator on: Appears when the vibrate
mode is on. An incoming call will vibrate
the phone rather than ring it.
12
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
illuminates. It turns off if no key is pressed within a
given period of time, depending on the Backlight
option set in the Phone Settings menu. The
backlight remains on at all times when the phone is
connected to a car kit (optional).
To specify the length of time for which the backlight
is active, set the Backlight menu option (5-1-5); see
page 80 for further details.
External Display
Alarm on: Appears when you set an
alarm.
Your phone has an external display on the cover. It
also shows Signal strength, Vibrator, and Battery
Strength icon. It indicates that you have an incoming
call or message, missed calls and alerts you at the
specified time if an alarm has been set.
Battery strength: Shows the level of
your battery. The more bars you see, the
more power you have left.
When you press and hold the volume key with the
phone closed, the backlight of the external display
illuminates.
13
Your Phone
Getting Started
Service Light
Installing the SIM Card and the Battery
The service light is on the top right-hand corner of
the phone. It flashes when services are available on
the phone.
• Keep all miniature SIM cards out of the reach of
small children.
• The SIM card and its contacts can easily be
damaged by scratches or bending, so be careful
when handling, inserting or removing the card.
• Before installing the SIM card, always make sure
that the phone is switched off and then remove
the battery.
To activate or deactivate use of the service light, set
the Service Light menu option (5-1-6); see page 81
for further details.
Service light
1. If necessary, switch off the phone by holding
down
until the closing animation is
displayed.
2. Pull/push and hold the catch above the battery on
the back of the phone. Lift the battery away.
14
15
Getting Started
3. Insert and slide the SIM card under the two tabs,
ensuring that the cut corner is top left and the
gold contacts of the card face into the phone.
Getting Started
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local SAMSUNG dealer for further details.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
120 minutes for a Standard battery, 150
minutes for a Extended battery.
Using a Travel Adapter
4. Place the battery back on the phone. First insert
the teeth on the bottom of the battery into the
corresponding slots, then push the battery against
the back of the phone until it clicks into place.
Make sure the battery is properly installed before
switching on the power.
16
The phone can be used while the battery is charging.
1. Connect the lead from the travel adapter to the
bottom of the phone. Check that the arrow on
the lead connector is facing towards the front of
the phone.
17
Getting Started
2. Connect the adapter to a standard AC wall outlet.
When the battery is charging, the battery icon
in the top right-hand corner of the display fills
repeatedly.
3. When finished charging, disconnect the adapter
from the power outlet.
Getting Started
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor will let you know
by blinking an empty battery icon(
), you will
hear a warning tone and a message will be repeated
at regular intervals on the display. When the battery
becomes too weak for the phone to operate, it
switches off automatically.
Disconnect the adapter from the phone by
pressing the grey tabs on either side of the
connector and pulling the connector out.
18
19
Getting Started
Getting Started
Switching the Phone On/Off
1. Open the phone.
2. Hold down
for more than one second to
switch the phone on.
3. If the phone asks for a password, key in the
password and press the OK soft key. The
password is factory set to 0000. For further
details, see page 124.
4. If the phone asks for a PIN, key in the PIN and
press the OK soft key. For further details, see
page 125.
When the phone has registered with an approved
network provider, the idle screen, illustrated
below, is displayed on the main display and the
external display respectively.
<Service Provider>
Feb 03 Saturday
12:57
12:57
Sat 02/03
Note: The display language is determined by the
SIM card inserted. To change the language,
use the Language menu option (5-1-3); for
further details, refer to page 79.
5. When you wish to switch the phone off, hold down
for more than two seconds.
Using the Earmicrophone
When you connect the earmicrophone to the jack on
the top of the phone, the button on the
earmicrophone will operate as below without
opening the phone or pressing a key on the phone.
Redialling a last call: Press the button twice in idle
mode.
Answering a call: press the button when a call
comes in.
Ending a call: press the button during a call.
Note: You can use the voice dialling or voice
command by pressing the button, when the
Active Folder menu option (5-1-10) is set Voice
Dial or Voice Command. For further details,
refer to page 82.
<External display>
Menu
PhoneBook
<Main display>
20
21
Call Functions
Call Functions
Making a Call
Ending a Call
When the idle screen is displayed, key in the area
code and phone number and press
.
Note: If you have set the Auto Redial option (5-1-7) to
ON (see page 81) and the person called does not
answer or the line is busy, the number is
redialled automatically up to ten times.
International Calls
1. Press and hold down
for the international
prefix. The + character appears.
2. Key in the country code, area code and phone
number and press
.
Correcting the Number
To clear...
Then...
The last digit
displayed
Press the ❙!soft key.
Any other digit
in the number
Press
or
key until
the cursor ( ❘ ) is immediately
to the right of the digit to be
cleared.
Press the ❙!soft key.
The whole display
22
Hold down the ❙!soft key for
more than one second.
When you have finished your call, briefly press
.
Making a Call using the Phonebook
You can store the names and phone numbers called
regularly in the SIM card and phone memory, called
the phonebook. You then simply select the required
name to recall the associated number. For further
details on the Phonebook feature, refer to page 35.
Voice Dialling
If you have set the Active Folder option (5-1-10) to
Voice Dial (see page 82), your phone also allows
you to say a name when you open the phone. It then
automatically dials the number stored with that
name. For further details on the Voice Dialling
feature, refer to page 67.
Last Number Redial
The phone stores the last 10 numbers dialled. To
recall any of these numbers, proceed as follows.
1. If there are any characters on the display, press
to return to idle mode.
23
Call Functions
Call Functions
Answering a Call
2. Press
numbers.
to access the list of last-dialled
3. Use
or
to scroll through the Redial list
until the required number is displayed.
4. Press
to dial the number displayed.
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
When somebody calls you, the phone rings and the
phone icon in the middle of the screen flashes.
If the caller can be identified, the caller’s phone
number (or name if stored in your phonebook) is
displayed.
1. To answer a call, open the phone. If the phone is
already open, press
or the Accept soft key.
If the Any-key Answer menu option (5-1-4) is set
to ON, you can press any key to answer a call
except for
and the Reject soft key (see page
80).
Note: To reject an incoming call, press the Reject
soft key or
. When the phone is closed,
press and hold the volume key on the left
side of the phone .
2. End the call by closing the phone or pressing
.
Note: You can answer a call while using the
phonebook or menu features.
In idle mode with the phone open, you can adjust the
key tone volume using the same keys.
24
25
Call Functions
Call Functions
Viewing Missed Calls
Editing a Missed Call Number
If you are unable to answer a call for any reason, you
can find out who was calling you, if this service is
available. In this way, you can call the person back,
if necessary.
The number of missed calls is displayed on the idle
screen immediately after a call was missed.
1. Press the Options soft key.
2. Press the Select soft key.
3. Change the number as required. Press
to move back through the number.
4. To...
Then press the...
To view the missed call immediately, proceed as
follows.
Call the number
1. If the phone is closed, open the phone.
Store the number
key.
Save soft key and enter
the name and location
required (for further
details, refer to page 35).
2. Press the View soft key.
The number corresponding to the most recent
missed call is displayed, if available.
3. To...
Scroll through the
missed calls
or
Call the number displayed
key.
Edit or delete a missed
call number
26
Then press the...
key.
or
Deleting a Missed Call
1. Press the Options soft key.
2. Press
or
to highlight the Delete option.
3. Press the Select soft key.
Options soft key
(see the following
paragraphs).
You can press
Call feature.
at any time to exit the Missed
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu option
(1-1); for further details, see page 55.
27
Call Functions
Call Functions
In-Call Options
Searching for a Number in the Phonebook
Your phone provides a number of control functions
that you can use during a call. To access these
functions during a call, press the Options soft key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
To switch the microphone off temporarily,
proceed as follows.
1. Press the Options soft key.
2. Press
or
to highlight the Mute option.
3. Press the OK soft key.
Your correspondent can no longer hear you.
To switch the microphone back on, proceed as
follows.
1. Press the Options soft key.
2. Press
option.
or
You can search for a number in the phonebook during
a call.
1. Press the Options soft key.
2. Press
option.
or
to highlight the Phonebook
3. Press the OK soft key.
4. Enter the start of the name that you want to find
and press the Find soft key.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
5. To review the highlighted entry, press the View
soft key.
For a more detailed description of the Phonebook
feature, refer to page 35.
to highlight the Unmute
3. Press the OK soft key.
Your correspondent can hear you again.
28
29
Call Functions
Call Functions
Putting a Call on Hold
Answering a Second Call
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and if you have set the Call Waiting menu
option (5-2-3) to Active (see page 89). You will be
notified of an incoming call by a call waiting tone.
To place a call on hold, press the Options soft key,
and select the Hold option. You can reactivate the
call whenever you want, by pressing the Retrieve
soft key.
To make a call while you have a call in
progress, proceed as follows.
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
2. Press
to dial the second call.
The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the
Options soft key, followed by the Hold option.
To answer a call while you have a call in progress,
proceed as follows.
1. Press
to answer the incoming call.
The first call is automatically put on hold.
2. If you want to switch between the two calls,
press the Swap soft key.
If you want to end a held call, press the Options
soft key and select the End held option.
3. To end the current call, press
.
Any held calls will automatically be reconnected
to you.
2. Make the second call in the normal way.
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing
.
30
31
Call Functions
Call Functions
Making a Multiparty Call
A multiparty call is a network service that allows
up to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The
first call is automatically put on hold.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Join option.
You can add incoming callers by answering the call
and pressing Options, followed by Join. Repeat as
required.
Having a Private Conversation With One
Participant
1. Press the Options soft key and choose the
Select one option. The list of call participants
appears.
32
2. Highlight the required person, by pressing
, followed by
.
or
3. Select Private.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
4. To return to the multiparty call, press the Options
soft key and select Join.
All the multiparty call participants can now hear
each other.
Dropping One Participant
1. Press the Options soft key and choose the
Select one option. The list of call participants
appears.
2. Highlight the required person, by pressing
, followed by
.
or
3. Select Remove.
The call is ended with that participant, but you
can continue to talk with the other participants.
4. End the multiparty call by closing the phone or
pressing
.
33
Call Functions
Phonebook
Muting/Sending Key Tones
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your phone
does not transmit the key tones.
Note: To communicate with answering machines or
computerised telephony systems, the Send
keys option must be selected.
Using the SMS Service
If you receive an SMS (Short Message Service)
message during a call, the message icon (
)
flashes in the display.
After you have finished your call, you can read the
message; refer to page 59 for further details.
You can store phone numbers and their associated
names in the memory of your SIM card. In addition,
you can store up to 500 numbers and names in the
phone memory. The SIM card and phone memories,
although physically separate, are used as if they
were a single entity, called the Phonebook.
Storing a Phone Number with a Name
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the phonebook.
1. Key in the number to be stored.
2. When you are sure that it is correct, press the
Save soft key.
Notes:
• If you make a mistake while entering a number,
correct it using the ❙ soft key. For further
details, refer to page 22.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
. ‘P’ is displayed to indicate the pause.
3. Enter the associated name (the maximum length
depends on your SIM card). For information on
how to enter a name, see page 42.
4. When you are satisfied, press the Save soft key.
The phone now displays the first free location in
the SIM card for you to save the number and
name. If the card memory is full, the first free
location in the phone memory is displayed.
34
35
Phonebook
Phonebook
5. Press the right soft key to toggle between the phone
(To Phone) and card (To Card) memories.
6. If you do not want to save the number and name in
the suggested location, press
to clear the
location number and enter your preferred location by
pressing the number keys.
7. Press OK to store the name and number.
8. You can access the phonebook options by pressing
the Options soft key, or scroll through the memory
with
or
.
To exit, press
.
Voice Record
Note: This option appears only when no name has
been recorded.
Allows you to add a voice tag to the number.
Follow the instructions given by your phone to record
the required name.
Play Voice
Note: This option appears only when you have
already recorded some names.
Plays back the names that you have recorded.
Phonebook Options
When storing or viewing a number in the phonebook,
Options appears above the left soft key to allow you to
access the phonebook options, described in the
following paragraphs.
Voice Delete
Note: This option appears only when you have
already recorded some names.
Allows you to delete a specific voice entry.
You are asked to confirm the deletion by pressing the
OK soft key.
Accessing the Options
To access the various phonebook options, proceed as
follows.
1. Press the Options soft key.
The first available option is highlighted.
2. Press the Select soft key to select the highlighted
option. Or, press
or
key one or more
times until the required option is highlighted to
highlight a differnt option.
36
Paste
Allows you to paste the phonebook number into the
normal dialling mode. Use this option to dial a
number similar to one in the phonebook (a different
extension in the same office for example).
Use the ❙!soft key to change the number as
required (refer to page 22 for further details). When
you are ready to dial, press
.
37
Phone Book
PPhhoonneebBooookk
Edit
Speed-Dialling by SIM Memory Location
Allows you to edit a number and name stored in the
phonebook.
Once you have stored phone numbers in the SIM
card, you can dial them easily whenever required.
Erase
To speed-dial a number, proceed as follows.
Allows you to erase a number and name stored in
the phonebook. You are asked to confirm that you
wish to erase the name and number from the
phonebook by pressing the Yes soft key.
To speed-dial a
Then...
number in locations...
2 to 9
Press and hold down the
appropriate key.
10 and above
Press the appropriate keys,
followed by the # key.
When the display shows
the name, phone number
and location, press the
Dial soft key.
Copy
Allows you to copy a phonebook number to another
location. Use this option to store a number similar to
one already in memory; once copied, edit the number
and store it into another location on the SIM card or
in the phone memory.
Memory Status
You can check how many names and phone numbers
are stored and how many locations are still free in
the card memory and phone memory.
Note: Memory location 1 is reserved for your Voice
Mail server number.
Alert
Allows you to set a ringing tone on a number stored
by the phone. You can select the required ringing
tone from several tones. When this number calls you,
the phone rings with this ringing tone.
38
39
Phonebook
Phonebook
Searching for and Dialling a Number in
the Phonebook
Dialling a Number using the Service
Directory or Information Numbers
1. When the idle screen is displayed, press the
PhoneBook soft key.
Note: The Service Dir. and Information Numbers
options may not be available, depending on
your SIM card.
2. If your SIM card provides with Service Dialling
Number (SDN) and Information Numbers services,
you should select the Find option.
3. Enter the start of the name that you want to find
and press the Find soft key.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
4. To...
When the idle screen is displayed, press the
PhoneBook soft key, then you can select one of the
services.
Service Dir.: enables you to view the Service
Directory and make calls from it.
Information Numbers: enables you to see the
Information Numbers in a tree structure and make
a call.
Then press the...
View the
highlighted entry
View soft key.
Select a
different entry
or
key one or
more times until the
required entry is
highlighted.
Look for a name
starting with a
different letter
Key labelled with the
required letter.
5. Once you have found the required entry, press
to dial the number.
40
41
Entering Text
Entering Text
Changing Text Input Mode
When storing a name in the phonebook, creating your
personal greeting or scheduling events in your
calendar, you will need to enter text.
When you are in a field that allows character entry,
you should notice the text input mode indicator in the
bottom of the display.
You are provided with the following text input modes.
To change to another text input mode:
English mode (T9)
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter – when you press the
key once, J,
K or L may be displayed. The English mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the correct
word, thus requiring far fewer keystrokes than the
traditional ABC mode.
ABC mode
This mode allows you to enter letters by pressing the
key labelled with the required letter once, twice,
three or four times until the letter is displayed.
1. Press the right soft key, indicating the text input
mode.
2. Scroll to the desired mode with
or
.
Note: If you want to exit the menu without changing
to a new mode, press the right
soft key.
3. Press the Select soft key to select the displayed
mode.
4. You will find the selected text input mode
indicated in the bottom of the display.
Number mode
This mode allows you to enter numbers.
Symbolic mode
This mode allows you to enter special characters.
is a registered Trademark of Tegic Communications, Inc. and
is licensed under U.S. Patent 5,818,437/ 5,953,541/ 6,011,554.
42
43
Entering Text
English Mode (T9)
To type a word, press keys corresponding to the
letters you need. Remember the following as you are
typing:
1. Press keys on the phone just once per desired
letter. For example, to enter ‘hello’, press
,
,
,
.
,
2. The word you are typing appears in the display. It
may change with each key press.
3. Type to the end of the word before editing or
deleting any keystrokes.
4. Complete each word with a space by pressing
.
If the word that appears in the display is not the
word that you desire, press
one or more times
to display alternate word choices for the keys you
have typed. (For example, ‘of’ and ‘me’ both shares
the sequence
,
. The phone displays the
most commonly used choice first.)
To type words not found in the English mode, change
the text input mode to ABC mode.
44
Entering Text
Smart Punctuations
Period, hyphen, and apostrophe are available on
.
English mode applies rules of grammar to insert the
correct punctuation. Notice that
is used twice
in this
example to display two punctuation marks:
l
e
t
‘
s
e
a
t
.
Changing Case
To shift the case of the next letter(s) that you type,
press
. There are three shift states: Lower
Case, Initial Capital and Capitals Lock.
Scrolling
• To move the cursor left or right through your text
message, press
or
.
• To scroll through alternate word choices for the
keys you have entered, press
.
Clearing Letters and Words
Press
one or more times to clear letters to the
left. Press and hold down the key to erase a word.
45
Entering Text
Entering Text
ABC Mode
When typing in ABC mode, you should press the key
labelled with the required letter:
-Once for the first letter
-Twice for the second letter
-And so on.
For example, you press
three times quickly to
display the letter “C” ,
two times quickly to
display the letter “K”. So, this method is called
Multi-tap typing.
Refer to the table below for the list of characters
assigned on each key.
The cursor moves to the right when you press a
different key. When entering the same letter twice (or
a different letter on the same key), just wait for a few
seconds for the cursor to move right automatically,
and enter the next letter.
Changing Case
To shift the case of the next letter(s) that you type,
press
. There are three shift states: Lower Case,
Initial Capital and Capitals Lock.
Inserting a Space
Press
Key
Characters in the Order Displayed
Upper Case
1
2
3
4
5
6
7
8
9
0
46
: ;
A B
D E
G H
J K
MN
P Q
T U
WX
0 x
¿
C
F
I
L
O
R
V
Y
<
¡
2
3
4
5
6
S
8
Z
>
1 = “ /
Ä ÆÅ Γ
É ∆
Θ
Λ
Ñ Ö Ø Ξ
7 ΠΣ
Ü Φ
9 ΨΩ
%# £
Lower Case
.
a
d
g
j
m
p
t
w
0
,
b
e
h
k
n
q
u
x
+
?
c
f
i
l
o
r
v
y
(
!
2
3
4
5
6
s
8
z
)
1 - ‘ @:
à ä æå Ç
é è
ì
ñ
7
ù
9
&
ò ö ø
ß
ü
to insert a space between the words.
Scrolling
To move the cursor left or right through your text
message, press
or
.
Clearing Letters and Words
Press
one or more times to clear letters to the
left. Press and hold down the key to erase a words.
_ $
47
Entering Text
Number Mode
Number mode enables you to enter numbers into a
text message. Press keys corresponding to the
desired digits, and manually switch back to the text
entry mode of choice.
Symbolic Mode
Symbolic mode enables you enter symbols into a
text message.
Press
or
to display more symbol sets.
Press keys corresponding to the desired mark, then
the phone automatically switches back to the text
entry mode used just prior to selecting Symbol mode.
Selecting Functions
and Options
Your phone offers a set of functions that allow
you to customise your phone. These functions are
arranged in menus and sub-menus, accessed via the
two soft keys (
and
). Each menu and submenu allows you to view and alter the settings of a
particular function.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current role.
Example:
<ServcieProvd
ier>
Feb03Saturday
10:40
MenuPhoneBook
Press the left soft key
to access the Menu
functions.
48
Press the right soft
key to access the
Phonebook feature.
49
Selecting Functions and Options
Using the Menu
To view the various functions/options available and
select the one required, proceed as follows.
1. Press the appropriate soft key.
2. To...
Select the:
• Function displayed
or
• Option highlighted
Then press the...
Left soft key.
View the next function
or highlight the next
option in a list
key.
Move back to the
previous function
or option in a list
key.
Move back up one
level in the structure
Exit the structure
without changing
the settings
Right soft key.
key.
The phone offers a range of functions that allows
you to tailor the phone to your needs. These
functions are arranged in menus and submenus.
The menus and submenus can be accessed by
scrolling.
1. In idle mode, press the Menu soft key to access
the menu facility. Scroll with
or
.
2. If the menu contains any submenus: for example,
Ring Tone, find the one you want by scrolling
or
. Press the Select soft key to
with
enter the submenu.
If the menu you have selected contains submenus,
repeat this step.
3. Scroll with
or
to find the setting of
your choice. Press the Select soft key to confirm
the chosen setting.
Notes:
• You can return to the previous menu level by
pressing the
soft key.
• You can exit the menu without changing the menu
settings by pressing
.
In some functions, you may be asked for a password
or PIN. Enter the required code and press
.
50
51
Using the Menu
Using the Menu
Menu Structure
Menus let you check or change your phone settings. The
following shows the menu structure.
Main menu
level 1
level 2
3. Voice Functions
1. Voice Dial
1. Record
2. Act
3. Delete One
4. Play All
5. Delete All
1. Record
2. Act
3. Play All
4. Delete All
1. Record
2. Replay
3. Delete One
4. Delete All
Note: You can only see menu 0, if your SIM card
supports the SIM Application Toolkit. This is a
network feature. Please contact your service
provider for more information.
2. Voice Command
3. Voice Memo
The numbers assigned to each menu function may
not match the menu number on the phone. It
depends on the services supported by the SIM.
Main menu
level 1
1. Call Records
1. Missed Calls
2. Received Calls
3. Dialled Calls
4. Call Time
5. Call Cost 1
2. Messages
1. Voice Mail
2. Read Messages
3. Write Messages
4. Preset Message List
5. Setup
6. Broadcast
52
7. Picture Messages
4. Tones
1. Ring Tone
2. Melody Composer
3. Ring Volume
4. Alert Type
5. Keypad Tone
6. Message Tone
7. Error Tone
8. Minute Minder
9. Connect Tone
5. Settings
1. Phone Settings
level 2
1. Last Call Time
2. Total Sent
3. Total Received
4. Reset Timers
1. Last Call Cost
2. Total Cost
3. Max Cost
4. Reset Counters
5. Set Max Cost
6. Price/Unit
1. Connect to Voice Mail
2. Voice Server Number
1. Greeting Message
2. Own Number 1
3. Language
4. Any-key Answer
5. Backlight
6. Service Light
7. Auto Redial
8. Auto Answer
9. Caller ID
10. Active Folder
11. Reset Settings
12. Active Line 1
1. Service Centre
2. Default Type
3. Default Validity
4. Reply Path
5. Delivery Report
1. Read
2. Receive
3. Channel List
4. Language
53
Using the Menu
Main menu
level 1
level 2
5. Settings
2. Network Services
1. Call Diverting 2
2. Call Barring 2
3. Call Waiting 2
4. Network Selection
5. Line Identification 2
6. Closed User Group
1. PIN Check
2. Change PIN
3. Phone Lock
4. Change Password
5. SIM Lock
6. FDN Mode 1
7. Change PIN2 1
1. Select Image
2. LCD Contrast
3. Menu Colour
4. Service Colour
1. Proxy Settings
2. Current Proxy
3. Security Settings
4. LCD/LED Settings
5. Browser Settings 2
6. Organiser
1. Scheduler
2. Alarm
3. Calculator
4. To Do List
5. Calendar
6. World Time
7. Clock
7. Games
1. AirShooting
2. SpaceWar
3. MyPet
8. WWW Services 2
1. Home
2. Bookmark
3. Goto
1
2
1. Daily Alarm
2. Once Alarm
3. Weekly Alarm
4. Alarm Tone
1. Set Time
2. Set Date
3. Format
Shown only if supported by your SIM card.
May not be shown or supported by your network service provider.
54
Call Records
Via this menu, you can view the phone calls:
• Missed
• Received
• Dialled
The number and name (if available) are displayed
together with the date and time at which the call
was made. You can also view call times and costs.
Missed Calls
Menu 1-1
Lets you view the last 10 unanswered calls. You can
also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the number from the list
Received Calls
Menu 1-2
Lets you view the last 10 phone calls received. You
can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the number from the list
55
Call Records
Dialled Calls
Call Records
Menu 1-3
Lets you view the last 10 numbers dialled.
You can also:
• Edit the number and save it in the phonebook
• Redial the number
• Delete the number from the list
Call Time
Menu 1-4
Lets you view the timers for calls made and received.
The following timers are available.
Last Call Time: length of the last call.
Total Sent: total length of all calls made since the
timer was last reset.
Total Received: total length of all calls received
since the timer was last reset.
You can use the Reset Timers option to reset the
call timers; you must first enter the phone password
(see page 124) and then press the OK soft key.
Call Cost
Menu 1-5
This network feature lets you view the cost of calls.
The following options are available.
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the cost
counter was last reset. If the total cost exceeds the
maximum cost set via the Set Max Cost option, you
will no longer be able to make any calls until you
reset the counter(does not affect calls to the
emergency services).
Max Cost: maximum cost set via the Set Max
Cost option (see below).
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see page
125) and then press the OK soft key.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes, and so forth.
56
57
Messages
Messages
Your phone receives voice mail notification messages,
and text messages. Voice mail and short message service
(SMS) are network service. Please contact your service
provider for more information.
When the
icon appears, you have received voice
mail.When the
icon appears, you have received
new messages. If the message memory is full, an error
message is displayed and you cannot receive any new
messages. Use the Delete option in the Read
Messages menu (2-2) to delete obsolete messages.
Once there is space in the memory any undelivered SMS
messages will be received (provided sufficient space is
available).
Picture and ringing tone messages can also be received.
To...
Send or receive
picture messages
Load ringing
tone messages
Then use the...
Picture Messages menu
option (2-7); see page 65.
Ring Tone menu option (4-1);
see page 72.
Voice Mail
Menu 2-1
This menu provides you with a quick way of accessing
your voice mailbox (if provided by your network).
Connect to Voice Mail
Before using this feature, you must enter the voice
server number obtained from your service provider (see
the following page). You can then select this option and
simply press the OK soft key to listen to your messages.
58
Note: If you press and hold
when the phone is in
idle mode, you can access your voice mail server
directly (Provided the number has already been
programmed into the Voice Server Number menu
location (2-1-2)).
Voice Server Number
You can change the voice mail server number.
To...
Then press the...
Enter the server
number
Corresponding number
keys.
Recall a number in
the phonebook
PhoneBook soft key.
Correct a digit
❙ soft key.
Move the cursor
without clearing the digit
or
key.
Note: See page 35 for instructions on how to use the
phonebook.
Read Messages
Menu 2-2
When the Read Messages menu is selected, the
header of the first message is displayed. This contains:
• Message number
• Message status (New, Old, Not sent, Sent)
59
Messages
Messages
To view this message, press the View soft key. The
screen shows the:
• Sender’s phone number (if sent with the message)
• Date and time at which the message was
received
• Message text
To scroll through the messages, press
or
.
You can choose the following options, by pressing
the Options soft key.
Text Reply: allows you to reply by sending a text
message. You can also:
• Change the SMS centre number (if required)
• Send the message
• Save and send the message
• Save but not send the message
Call back: allows you to call the sender back.
Edit: allows you to edit a message.
Delete: allows you to delete obsolete messages.
Cut Number: allows you to extract a number from
the message text, so that you can call the number or
save it in the phonebook.
Send: allows you to send a message that you have
not already sent.
Send again: allows you to resend a message that
you have already sent.
Note: The options available vary, depending on the
message status (New/Old, Not sent, Sent).
60
Write Messages
Menu 2-3
Via this menu, you can write and edit text messages
of up to 160 characters.
1. Key in a message. For details on how to enter
text, refer to page 42.
2. After you complete the message, you can select
the following options.
Send Only: allows you to send the message
immediately. You can enter the required
destination.
Save and Send: allows you to save a copy of the
message and then send the message to the
required destination. You can read the message
using the Read Messages option. When you
read the message, ‘Sent’ is displayed to indicate
the message state.
Save Only: allows you to save the message so
that it can be sent later. When you read the
message, ‘Not sent’ is displayed.
3. After selecting the required option, press the
Select soft key.
The display prompts you to enter the destination
number.
4. Enter the phone number and press the OK soft
key. Or,
Press the PhoneBook soft key to select the
number from the phone book.
61
Messages
Messages
Preset Message List
Menu 2-4
Using this menu, you can preset up to five messages
that you use most frequently. This menu shows the
preset message list. Scroll through the list using
or
. When the required message number
appears, press the Options soft key.
The following options are available.
Edit: allows you to write a new message or edit the
selected preset message.
Note: For further information on how to enter text in
your message, refer to page 42.
Send Message: allows you to recall the selected
preset message. Once you have completed the
message, you can send, save and send, or simply save
it.
Delete: allows you to delete the selected preset
message.
Default Type: allows you to set the default message
type (Text, Voice, Fax, X.400, Email, and ERMES). The
network can convert the message into the selected
format.
Default Validity: allows you to set the length of
time for which your text messages will be stored at
the SMS centre while attempts are made to deliver
them to the recipient.
Possible values are one hour, 6 hours, 24 hours, one
week and the maximum authorised by your service
provider.
Reply Path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
Delivery Report: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Broadcast
Setup
Menu 2-5
Via this menu, you can set up default information on
the SMS feature.
Service Centre: allows you to store or change the
number of your SMS centre required when sending
text messages. You must obtain this number from
your service provider.
62
Menu 2-6
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately they are
received, provided that:
• The phone is in the idle mode
• The Receive option is set to Enable
• The message channel is currently active in the
channel list
63
Messages
Messages
If the message is long, press the down volume key
on the left side of the phone one or more times.
Picture Messages
Menu 2-7
The last five messages are also stored for later
retrieval. Please contact your service provider for
more information.
The phone allows you to send and receive text
messages that contain pictures. These messages are
called ‘Picture Messages’, several of which are preset
in the phone and can be replaced with new ones
received from other sources.
The following options are available.
The following options are available.
Read: lets you view the first message. Scroll through
the message using
or
. At the end of the
message, press the Next soft key to move to the
next message.
Write Message: allows you to write text to send
with the picture message.
Receive: allows you to Enable or Disable the
reception of broadcast messages.
Channel List: lists all available channels. The
channels currently selected are indicated by an
asterisk (*) beside the name. When you select one of
them, you can edit, enable, disable or delete the
channel.
The Enter Channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel ID obtained from your service provider, and a
title for the channel.
Delete: deletes the picture message; Empty is
displayed instead of the title.
Send Message: allows you to enter the destination
phone number; you must then press the OK soft key
to send the picture message.
Cut Number: allows you to extract a number from
the picture message, so that you can call the number
or save it in the phonebook.
Receiving a Picture Message
To view a message immediately you receive it, press
the View soft key. Press the right soft key to toggle
between viewing the message and the image.
Language: allows you to select your preferred
language for the cell broadcast message display.
64
65
Messages
The following options are available.
Save: allows you to save the picture message to your
picture message list.
Discard: allows you to discard the picture message
without saving it.
Cut Number: allows you to extract a number from the
picture message, so that you can call the number or
save it in the phonebook.
Note: This function is available between phones
supporting Nokia’s* Smart Messaging services.
Each picture message is made up of several text
messages;therefore, sending one picture
message may cost more than one text message.
Picture messages are stored in the phone, you
cannot view them if you use your SIM in another
phone.
*
66
Nokia is a registered trademark of Nokia Corporation.
Voice Functions
You can use the Voice feature to customize various
settings, such as the:
• Voice Dial
• Voice Command
• Voice Memo
Voice Dial
Menu 3-1
The voice dialling feature allows you to make phone
calls by saying a voice tag that has been added to a
desired name and phone number. Any spoken word, for
example a name, can be a voice tag.
Before using voice dialling, note that:
• Voice tags are not language dependent. They are
dependent on the speaker’s voice.
• The voice tags are sensitive to background noise.
Where possible, record voice tags or make calls in a
quiet environment.
• When recording a voice tag or making a call, hold
the phone in the normal position close to your ear.
• The maximum length for a voice tag recording is
about 1.5 seconds, but very short names are not
recorded
• You can store up to twenty voice tags in the
phone’s memory.
67
Voice Functions
Voice Functions
Voice Dial Record
Voice Dial Delete One
Allows you to record name tags and allocate them to
numbers for voice dialling.
Allows you to delete an individual voice tag. The
corresponding phone number remains in the
phonebook but the voice tag is deleted.
Say the name you want to use for voice dialling after
you hear a voice prompt. For best results, use names
with at least two syllables, or use both a first and
last name. The phone stores the name as a “first”
sample, and then prompts you to say the name
again.
If the name displayed is... Then press the...
To be deleted
OK soft key.
Not to be deleted
or
key.
The next name is
displayed.
Respond to the prompt by repeating the name. The
phone stores the name as a second sample and then
requests the phone number.
To exit the Voice Dial Delete One option, press the
soft key.
To store the number, press the O K soft key. Follow
the instructions described on page 35 to complete
storing the number into your internal phonebook.
Voice Dial Play All
Voice Dial Act
Voice Dial Delete All
This option activates voice dialling.
Allows you to delete all voice tags. The
corresponding phone numbers remain in the
phonebook but the voice tags are all deleted. Press
the OK soft key when the message ‘Delete All
confirm?’ is displayed.
Otherwise, press the Cancel soft key to exit the
function without deleting the voice tags.
You hear a voice prompt and Say Name is
displayed. Say the voice tag clearly. If no match for
the voice tag is found or recognized, the phone may
ask you to try again. The phone automatically dials
the number of a recognized voice tag.
Allows you to play back all recorded voice tags.
Note: This option is only available once you have
recorded and stored voice tags.
68
69
Voice Functions
Voice Functions
Voice Command
Menu 3-2
This menu allows you quick access to menus you use
frequently, using your own voice commands.
You can select the following functions:
Voice Command Record: The most frequently used
menu functions are programmable with your own
voice commands. The menus are preset to OFF at the
factory, indicating that they are not recorded. When
voice commands are recorded successfully, the
menus are changed to ON in the display.
Voice Command Act: Use this menu to access the
menu of the recorded voice commands.
Voice Memo Record: Allows you to record a
memo. The screen displays the:
• Memo location
• Date and time when the memo was recorded
• Recording time counter
The maximum recording time is about 35 seconds.
If you want to record for longer, press the Continue
soft key. Split appears instead of Continue. You can
continue recording and the rest of the memo is
stored in the next memo location.
To stop recording, press the Stop soft key.
Note: If all memo locations are full, you must delete
an old memo before recording a new one.
Voice Memo Replay: Allows you to play back all
memos recorded, starting with the most recent
memo. The screen displays the:
• Memo location
• Date and time when the memo was recorded.
Voice Command Play All: Plays all voice
commands you have recorded.
Voice Command Delete All : Deletes all
commands you have recorded.
To skip to the next memo, press the Skip soft key, to
stop the playback, press the Stop soft key.
Voice Memo
You can use the Voice Memo feature to :
• Record up to 3 voice memos
• Play the recorded voice memos
• Delete one or all voice memos
70
Menu 3-3
Voice Memo Delete One: Allows you to delete a
specific memo. All memos recorded are played back,
starting with the most recent one.
Voice Memo Delete All: Allows you to delete all
memos. Press the OK soft key to confirm.
71
Tones
Tones
You can use the Tones menu to customise various sound
settings, such as the:
• Ringing tone, volume and type
• Composing your own melody
• Sounds made when you press a key, make an error or
receive a message
Ring Tone
Menu 4-1
This option allows you to select the phones ringing tone.
You can choose between many different tones and each
time you select a tone it is played for a few seconds. 3
download ring tones from ringing tone message, 2 user
ring tones using the Melody Composer, and 12 changable
ringtones downloading from the CD in this package are
also available.
When you receive a ringing tone message, proceed as
follows.
1. To listen to the tone, press the Play soft key.
2. To save the ring tone, press the Save soft key.
3. Select the ringing tone location you wish to save it and
press the O K soft key.
4. To use this tone as the current ringing tone, press the
Ye s soft key. Otherwise press the N o soft key.
If your SIM card supports ALS, this option also allows you
to select a different ring tone for each line. If you set a
different ring tone for each line, you can distinguish
between incoming calls.
Note: While downloading, if the battery is detached from
the phone, you can lose the downloaded ringtones.
72
Melody Composer
Menu 4-2
This menu allows you to compose your own,
customised ringing tone.
• Three octaves are available.
• A maximum of 100 notes can be entered.
• Adjustable length of note and note rest.
To Compose Melody
You can compose two melodies. When you access
the menu, the melody name appears, if already
created. Otherwise, Empty appears. Select Empty
to create a new melody or select the melody’s name
that you want to edit.
Use the following keys to compose a melody:
: to enter C, the first note in the musical scale
(doh).
: to enter D (re).
: to enter E (mi).
: to enter F (fa).
: to enter G (soh).
: to enter A (la).
: to enter B (ti).
: to raise an octave higher or drop an octave
lower.
: Not available
: to enter a note rest. Press
until you
find the desired length of rest.
: to raise one semitone above the tone
written. Example: If you want to enter a F
sharp, press F (fa) then press
.
73
Tones
Tones
: to delete notes.
: to move a note to the next semitone
higher position or lower position in the
musical scale. For example, the note A
moves A#, B, C, C# in the scale each time
you press
.
: to adjust a length of a note. Enter a note,
then press
. Notice that the note length
changes each time you press the key.
You can listen to your melody by pressing the Listen
soft key. If you are satisfied, press the Ye s soft key,
and enter the melody name. For information on how
to enter a name, refer to page 42.
Note: If you want to cancel your composing, press
. The display goes back to the previous
menu level, the screen displays Empty.
After you save the melody, the display asks you if
you want to set the melody as the ring tone. If you
select Ye s, your phone plays the melody each time
your phone rings. If you select N o, the melody is just
saved and the phone returns to the idle mode.
To Delete a Selected Melody
Ring Volume
Menu 4-3
Allows you to adjust the ringing volume to one of
five levels. Use the volume keys on the left side of
the phone or the
or
keys. The greater the
number of bars, the greater the volume level.
Alert Type
Menu 4-4
Allows you to indicate how you are to be informed of
any incoming calls. The following options are
available.
Light Only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ringing tone
selected via menu option 4-1.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone both rings and vibrates.
Note: Pressing and holding down
toggles
between the current alert type and Vibration.
1. Select the melody you want to delete.
2. Press and hold
will be erased.
for a few seconds. All notes
3. Press the Listen soft key. The display asks you if
you are sure you want to erase the melody. Select
the Ye s soft key.
74
75
Tones
Keypad Tone
Tones
Menu 4-5
Error Tone
Menu 4-7
Allows you to select the tone that the keypad
generates when you press a key. The following
options are available.
Allows you to select how the phone informs you that
you have made a mistake. The following options are
available.
OFF: the keys do not make any sound.
OFF: the phone does not beep.
Tone: each key, when pressed, makes a different
sound.
ON: the phone beeps to indicate an invalid entry.
Beep: each key, when pressed, makes the same
sound.
Minute Minder
Message Tone
Allows you to specify whether the phone must beep
every minute during an outgoing call to keep you
informed of the length of your call. The following
options are available.
Menu 4-6
Allows you to select how the phone informs you that
a new message has been received. The following
options are available.
Single Beep: the phone beeps once.
Menu 4-8
OFF: the phone does not beep.
ON: the phone beeps every minute.
SMS Tone 1 ~ SMS Tone 5: the phone sounds the
selected SMS tone.
Connect Tone
Light Only: the service light on the top of the phone
flashes.
Allows you to specify whether the phone should
beep when the phone connects to the network. The
following options are available.
Vibration: the phone vibrates but does not ring.
Menu 4-9
OFF: the phone does not beep.
ON: the phone beeps when your call is accepted.
76
77
Settings
Settings
Own Number
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Settings menu.
Phone Settings
Menu 5-1
Note: The contents of this menu may be different
depending on the SIM card.
You can enter your own name and number using this
menu. If you have subscribed to the Alternative Line
Service, you can select a line with
or
.
Greeting Message
The following options are available:
Allows you to set a greeting message to be displayed
briefly when the phone is switched on. The current
message is displayed.
Erase: allows you to erase name and number.
To...
Then press the...
Clear the existing message
key and hold it
down until the message
is cleared.
Enter a new message
Appropriate
alphanumeric keys.
For more information on entering characters, refer to
page 42.
Edit: allows you to edit name and number. If your
SIM card supports ALS only the Edit soft key
displays. Press the Edit soft key and you can
setup or edit your own name for the ALS line.
Language
You can set a different setting for the text language
and voice language.
You can also set the default text input mode. For
details on the text input mode, refer to page 42.
To go back to the previous menu level without saving
your input, press
.
78
79
Settings
Settings
Any-key Answer
Service Light
Depending on the setting of the Any-key Answer
option, you can answer an incoming call by pressing
any key except
and the Reject soft key.
To reject the call, press
or the Reject soft
key.When the phone is closed, press the volume key
on the left side of the phone to reject an incoming
call. ( If the Any-key Answer menu option (5-1-4) is
set to ON, just press, if it’s set to OFF press and hold
down the button.)
Allows you to select whether or not the service light
on the top of the phone is used. The following
options are available.
ON: you can press any key except
Auto Redial
OFF: you can only press
and Reject.
or Accept keys.
ON: the service light flashes when the phone is
ready for use.
OFF: the service light is not used.
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Backlight
Note: The interval between two call attempts varies.
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off. The
following options are available.
The following options are available.
Short: the backlight comes on when you press a key
or receive a call and switches off 10 seconds after
the last key is pressed.
Long: the backlight comes on when you press a key
or receive a call and switches off 20 seconds after
the last key is pressed.
OFF: the backlight is not used.
80
ON: the number is redialled automatically.
OFF: the number is not redialled.
Auto Answer
With the Auto Answer function, the phone automatically answers calls after 3, 5 or 10 seconds. You
can also turn this feature off.
Note: This feature is only available when the phone
is connected to a car kit (optional).
81
Settings
Settings
Caller ID
Reset Settings
You can prevent your phone number from being
displayed on the phone of the person being called.
You can easily reset your phone to its default
configuration. Before proceeding, you must enter the
phones 4-digit password.
Note: Some networks do not allow the user to
change this setting.
The following options are available.
Default: the default setting provided by the network
is used.
Hide Number: your number is not displayed on the
other person’s phone.
Send Number: your number is sent each time you
make a call.
Active Folder
The voice dial and voice command mode can be
activated automatically whenever the phone is
opened.
The following options are available.
OFF: the voice dial mode must be activated manually
via the Voice Dial menu; for further information, refer
to page 67.
Note: The password is preset to 0000. To change this
password, refer to page 95.
Active Line
Some SIM cards may be used with two subscriber
numbers (network service). This function is available
only if your SIM card supports it.
This menu allows you to select the desired line for
making calls. However, calls on both lines can be
answered regardless of the selected line. When you
select a line, the line number appears as an indicator
after the operator/service provider’s names.
When you select the Manual option, you can choose
a line whenever you are in call barring, diverting,
waiting function, and there is no indicator to show
the active line.
Voice Dial: the voice dial mode is activated when
you open the phone.
Voice Command: the voice command mode is
activated when you open the phone.
Note: When you use the earmicrophone and the
Voice Dial or Voice Comand is set, you can
use this function by pressing the button on the
earmicrophone.
82
83
Settings
Network Services
Settings
Menu 5-2
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
Call Diverting
Note: The call divert options that are not supported
by your network operator may not be shown.
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
Call diverting can be set up in the following ways.
Divert Always: all calls are diverted.
Busy: calls are diverted if your phone is engaged on
another call.
No Reply: calls are diverted if you do not answer
the phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
Cancel All: all call diverting options are cancelled.
Note: These options may be different depending on
the SIM card.
84
You can specify individual diverting options for each of
the following call types:
• Voice calls only
• Fax calls only ; not available when a Line 2 is in use
• Data calls only ; not available when a Line 2 is in
use.
Example: You can:
• Systematically divert fax calls to your
office fax machine
• Divert voice calls to your colleague if you
are already using the phone
To set your call diverting options, proceed as follows.
1. Select the type of calls diverting required by
pressing
or
until the appropriate option
is highlighted, and then press the Select soft key.
2. Select the type of calls to be diverted by pressing
or
until the appropriate option is
highlighted and then press the Select soft key.
3. Press the Activate soft key to confirm your settings.
4. You can enter the number of your choice.
To enter the international code, press and hold
until the + sign is displayed. You can also select a
number in the phonebook or the voice server
number, by pressing the Options soft key, followed
by PhoneBook or Voice Server Number.
When you are satisfied, press the Send or OK soft
key; the phone sends your setting to the network
and the network’s acknowledgement is displayed.
85
Settings
Settings
Call Barring
To deactivate specific call diverting settings, proceed
as follows.
1. Select the call diverting option to be deactivated.
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways.
2. Select the type of call to which this option applies.
All outgoing: calls cannot be made.
3. Press the Remove soft key.
International: international calls cannot be made.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call diverting settings by
selecting the Cancel All option.
International except to home: when abroad, calls
can be made only to numbers within the current
country and to your home country, that is the country
where your home network provider is located.
All Incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
To set your call barring options, proceed as follows.
1. Select the type of calls barring required by
pressing
or
until the appropriate option
is highlighted and then press the Select soft key.
2. Select the type of calls to be barred by pressing
or
until the appropriate option is
highlighted and then press the Select soft key.
3. Press the Activate soft key to confirm your
settings.
86
87
Settings
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
Settings
Call Waiting
This network service enables you to be informed
when someone is trying to reach you during another
call.
To set your call waiting options, proceed as follows.
To deactivate specific call barring settings, proceed
as follows.
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option applies.
3. Press the Remove soft key.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and
change the call barring password obtained from your
service provider using this option. You must enter the
current password before you can specify a new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
88
1. Select the type of calls to which the call waiting
option is to be applied by pressing
or
until the appropriate option is highlighted and
then press the Select soft key.
2. Press the Activate soft key to confirm your
settings.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call waiting settings, proceed
as follows.
1. Select the type of call to which the option applies.
2. Press the Deactivate soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
89
Settings
Settings
Network Selection
Line Identification
The Network Selection feature enables you to:
• Indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually
This menu option lets you view the following line
identification settings.
Note: You can select a network other than your
home network only if it has a valid roaming
agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed as
follows.
1. When Network Select is displayed, press the
Select soft key.
CLIP (Calling Line Identification Presentation) /
COLP (Connected Line Identification Presentation)
If these network functions are active, the caller’s
number is displayed during a call. If the phone
number matches one stored in the phonebook, the
caller’s name is also displayed.
CLIR (Calling Line Identification Restriction) /
COLR (Connected Line Identification Restriction)
If these network functions are active, your phone
number is not displayed on the called person’s phone.
2. Press
or
until the appropriate option is
highlighted and press the OK soft key.
If you select Automatic, you are connected to the
first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press
or
until the preferred network is
highlighted and press the OK soft key.
You are connected to that network when roaming.
90
91
Settings
Closed User Group (CUG)
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to 10 user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
Settings
Deactivate: deactivates the CUG function.
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index (as advised by your service
provider) or delete a selected group.
Example: A company lends SIM cards to its employees
and wants to restrict outgoing calls to
members of the same team.
To...
Activating a Closed User Group
Add a new CUG index
If you select the Closed User Group menu, you are
asked if you want to activate the CUG function. Press
the Yes soft key. You can now access the following
options.
Options soft key, select
Add and enter the index.
Delete a CUG index
or
key to select
the index you want to
delete, press the Options
soft key and select Delete.
Scroll through the
existing CUG indexes
Then press the...
or
key.
Outside Access: enables you to allow or prohibit
calls to numbers other than those nominated for the
Closed User Group. This feature depends on the
nature of your CUG subscription. Please check with
your service provider.
Default Group: you may communicate a default
CUG to your service provider. If you have done so,
you can enable the Default Group option on your
phone. When making a call, you will be given the
option of using your default CUG, instead of
selecting one from the list.
92
93
Settings
Security Settings
Settings
Menu 5-3
Change PIN
The Security feature enables you to restrict the use
of your phone to:
• The people of your choice
• The types of calls of your choice
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature is
enabled. You must enter the current PIN before you
can specify a new one.
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (also see page 124).
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
PIN Check
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 4-digit phone
password each time the phone is switched on.
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Any person who does not have your PIN cannot,
therefore, use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
To change your PIN, refer to menu option 5-3-2
opposite.
The following options are available.
Enable: you must enter the PIN each time the phone
is switched on.
Disable: the phone connects directly to the network
when you switch it on.
Phone Lock
The password is factory set to 0000. To change the
phone password, refer to menu option 5-3-4.
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available.
Enable: you are required to enter the phone
password when you switch the phone on.
Disable: you are not asked to enter the phone
password when you switch the phone on.
Change Password
The Change Password feature allows you to change
your current phone password to a new one. You must
enter the current password before you can specify a
new one.
The password is factory set to 0000. Once you have
entered a new password, you are asked to confirm it
by entering it again.
94
95
Settings
SIM Lock
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter the
SIM lock code.
Once you have entered the lock code, you are asked to
confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock code.
FDN Mode
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available.
Enable: you can only call phone numbers stored in the
phonebook. You must enter your PIN2.
Disable: you can phone any number.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Settings
LCD/LED Settings
Menu 5-4
Select Image
This option allows you to select the image to be displayed.
Image 1~5: shows you the predefined image.
Calendar: shows you the calendar. When you see the
Calendar in idle mode you can scroll monthly by pressing
or
key.
User Image: shows the downloaded image from the CD in
this package. You can set the text colour, background
colour, text position and display time with the sub options.
To preview each image by pressing the Preview soft key
and return the image list by pressing .
Note: The name of the downloaded image is not displayed
in the phone, but shown in the PC link.
LCD Contrast
To change your PIN2, refer to menu option 5-3-7
below.
This option allows you to adjust the contrast of the LCD
screen. Press
to increase or
to decrease the
contrast.
Change PIN2
Menu Colour
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one.
This option allows you to select the pattern of the menu.
You can choose one of three patterns.
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
96
Service Colour
There are six colours available for the service light: green,
orange, red, violet, blue and sky blue.
You can scroll through these colours, by pressing
or
key. Press the Select soft key to select
the required colour.
97
Settings
Browser Settings
Menu 5-5
Note: This menu may not be shown depending
on your network service provider.
You can setup several proxies using the Proxy
Settings menu (5-5-1), and you can choose one of
those for a current proxy using the Current Proxy
menu (5-5-2). Each proxy has following information.
These may vary depending on your service provider.
Contact the service provider for further details.
Organiser
The Organiser feature enables you to:
• Write your schedule or to do list
• Use a calculator
• Check the calendar
• Set the current date and time
• Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for example)
• Find out what time it is in various cities around
the world
Proxy Name: To view or edit the name of proxy.
WDP Address: To view or edit the WDP address.
Scheduler
Menu 6-1
Home URL: To view or edit your home URL address.
The Scheduler helps you to keep track of reminders,
calls that you need to make, meetings, and birthdays.
The phone sounds an alarm tone when the set date
for a birthday, reminder or call is reached.
Access Point : To view or edit the following settings.
Note: Your phone must be switched on to use this
function.
NAS Phone Number: You can set the number of the
PPP server.
When you access the Scheduler menu, the
following options are available:
Login Name: You can set the login name of the PPP
server. You can ignore it, if it’s not necessary.
Go to date: allows you to enter a particular date and
to make a schedule on that date.
Port Number: To view or edit the number of the port
used for connecting to the gateway.
Password: You can set the password of the PPP
server. You can ignore it, if it’s not necessary.
View All: shows the schedules you have made.
Delete All: deletes all the schedules you have
made.
Network Type: You can select one of network types
among V.32 Transparent, V.32 Non-Transparent, V.110
Transparent and V.110 Non-Transparent.
98
99
Organiser
To create a new schedule, proceed as follows.
1. When a calendar screen appears, select the month
by using the volume key on the left side of the
phone, select the week by using
or
, and
select the day by using
and
. You can
also use the Go to date menu option to specify
the date.
Note: If you want to cancel your selection in the
Calendar screen, press
. The phone goes
back to the previous menu level.
2. When you press the O K soft key, you can select a
schedule type. Four types are available:
• Reminder: requires contents and the time.
• Call: requires a phone number and the time.
• Meeting: requires contents and the time.
• B i rthday: requires a name and the time.
3. Enter the appropriate information, referring to
page 42 for further details on how to enter text if
necessary.
4. If you want to set an alarm on the scheduled date
and time, select Yes when the phone asks you to
set alarm and specify the alarm time.
If you select No, the phone just saves the
schedule and returns to idle mode.
Organiser
A date that has a schedule associated is displayed with
an underline. If you select a date where a schedule has
already been created, its contents will be displayed.
Note: If you have created more than two schedules for
a day, you can scroll to the desired schedule by
pressing
or
.
The following options are available:
Add: allows you to add new contents. For details on
entering text, see page 42.
Delete: deletes the schedule.
Move: moves the schedule to a new date of your
choice.
Copy: copies the schedule to a new date of your choice.
Delete Day: deletes schedules on the date.
Alarm
Menu 6-2
This option allows you to set the alarm to ring at a
specific time. You can set one or more alarms.
The following alarms are available.
Daily Alarm: the alarm rings everyday at the same
time.
Once Alarm: the alarm rings only once and is then
deactivated.
Weekly Alarm: the alarm rings every week on the
same day and at the same time.
Alarm Tone: allows you to select a specific tone for the
alarm ringer.
100
101
Organiser
To set the alarm, proceed as follows.
1. Select an alarm type by pressing the Select soft
key.
2. Set Alarm option allows you to set the alarm time
or days of the week.
If you choose Weekly Alarm, select the required
day of the week and press
. The * symbol
appears to indicate that the day is selected. Repeat
as necessary.
To remove it, press
.
You can set more than one day.
Organiser
Calculator
Menu 6-3
You can use the phone as a 9-digit calculator. The
calculator performs basic arithmetic functions;
addition, subtraction, multiplication, division.
Percentage operation is also available.
To use the calculator, proceed as follows.
1. Enter the first figure using the number keys.
2. Press the Operator soft key until you find the
desired arithmetic symbol; + (add), - (subtract), x
(multiply), / (divide).
3. Press the OK soft key.
3. Enter the second figure.
4. Enter the required time, then press the OK soft key.
4. Repeat Steps 2 and 3 if necessary.
Alarm Activated is displayed.
Once an alarm has been set, you can see the alarm
icon ( ) in the top line of the display. To stop the
alarm when it rings, open the phone and press any
key.
5. To get the result, press the Equal soft key or
To erase any mistakes or clear the display, use
To enter a decimal point, press
two decimal places.
.
.
. It calculates to
To deactivate the alarm, select Remove Alarm.
Note: When your phone is switched off, the alarm
doesn’t work.
102
103
Organiser
Organiser
To Do List
Menu 6-4
Examples:
Expression
Key operation
Result
12*3+5=
12x3+5
(or
)
41
34+57=
34+57
(or
)
91
45+57=
45
(or
)
102
48-23=
48-23
(or
)
25
14-23=
14
(or
68*25=
68x25
(or
)
)
1700
-9
68*40=
40
(or
)
2720
35/14=
35/14
(or
)
2.5
98/14=
98
(or
)
7
10% of 200
200x10
20
10=? % of 100
10/100
10
10% premium of 200 200+10
220
10% discount of 200 200-10
180
square of 4
4x
(or
)
16
reciprocal of 8
8/
(or
)
0.12
Note: When you have finished with the calculator,
press
to exit the calculator and return to the
previous menu level.
This menu allows you to write a job list with
priorities and deadlines and also sort the jobs
according to their priority type or their status. If you
don’t have any items in the list, proceed as follows
to make your to do list.
1. press the N e w soft key to input a new item.
2. Input your details.
For information on how to enter characters, see
page 42.
3. Press the O K soft key.
4. Select the priority type using the Select soft key.
(1 or 2)
5. Input deadline.
6. Press the Ye s soft key.
If you have any other items in the list, you can see
the list in the display with a mark box, priority level
and job details.
To see the detailed contents of an item, press the
Vi e w soft key. In this view, if you press
,a
mark box, date and time created will be displayed.
To mark your item, press
. The key toggles
between marking and unmarking the viewed job.
104
105
Organiser
Organiser
You can choose the following options, by pressing the
Options soft key.
N e w : allows you to write new item.
Mark : allows you to mark an item or job.
Edit : allows you to edit your item’s details.
Sort : allows you to sort according to priority 1,
priority 2, or marking status.
Copy : copies one item to another.
Delete : deletes the item.
Menu 6-5
You can view calendars of 1900 through to 2099.
You can also view the lunar date of the selected date.
• Use
or
to moves to the next day or back
to a previous day.
• Use
or
to moves to the next week or back
to a previous week.
• Use the volume key on the left side of the phone to
move to the next or previous month.
Note: You can also use
or
to select the day
and
or
to select the week.
You can see another date by selecting the Goto soft
key.
106
Menu 6-6
You can use your phone to check the current time in
21 major cities around the world. Scroll through the
cities using
.
The screen shows the:
• City name
• Current date and time
• Time difference between the selected city and your
city if you have set the local time (see below for
further details) or GMT (by default)
To select the time zone in which you are located,
proceed as follows.
Delete All : deletes all items.
Calendar
World Time
1. Select the city corresponding to your time zone by
pressing
one or more times.
The local date and time are displayed.
2. Press the Set soft key.
3. To...
Then press the...
Update the current
date/time with this
new setting
Set Local soft key.
Indicate that the
time zone is currently
using the daylight
saving time
Set DST soft key.
A check mark is shown
next to the time
difference.
Indicate that the
time zone is no longer
using the daylight
saving time
Remove DST soft key
(only available when the
check mark is shown
next to the time
difference).
107
Organiser
Games
Clock
Menu 6-7
Set Time
Using this menu you can also enjoy games on the
phone.
Allows you to change the time displayed, using the
24-hour system.
Scroll to the desired game and press the Select soft
key.
Note: Before setting the time, you must specify your
time zone, via the World Time menu option (6-6).
The following options are available.
Set Date
Allows you to change the date displayed. Enter the
day, month and year.
Format
Allows you to select the format of date between
DD/MM/YYYY and MM/DD/YYYY.
New Game: allows you to start a new game.
High Score: shows you the highest scores table.
Not all games have a high score table.
Key Info.: shows you what keys do what within the
game.
Continue: allows you continue a previously saved
game. The menu is only available when a
game has already been saved.
While you are playing a game,
To...
adjust the game volume
Then press the...
volume keys
pause the game
pause and exit the game
108
109
Games
Games
If your finishing score is ranked fifth or higher, you are
allowed to enter your name using up to 10 characters.
Here are the list of available characters or function.
1: . @ - _ / : ~ 1
2: A B C 2
3: D E F 3
4: G H I 4
5: J K L 5
6: M N O 6
7: P Q R S 7
8: T U V 8
9: W X Y Z 9
0: 0
: to clear a previous character
left/right soft key: to move the cursor left or
right
: to move the cursor to the next position
AirShooting
Menu 7-1
Key Commands
1: move up
4: move left
5: move right
7: move down
6: launch a missile
9: drop a bomb
Space War
Menu 7-2
Object
It is an arcade board game. It requires patience and
discretion. The aim is to remove about 80% of the
black background while avoiding the mushroom
bombs in order to progress to the next stage.
When you start a new game, press
Object
Key Commands
The goal of the game is to drive a fighter plane to its
destination. There are 3 stages, each stage is harder
than the previous and the weapons get more powerful
with each stage.
2: move up
4: move left
6: move right
8: move down
5: stop
to start.
When you start a new game, press any key to select a
player. Press 1 or 7 to scroll up or down, and press 9 to
start a game.
110
111
Games
WWW Services
MyPet
Menu 7-3
Object
To care for a virtual pet cat. Choose a cat from a
choice of three colours. You will need to care for the
cat, feed it at least 3 times a day, bath it, read to or
play with it and give it medical attention if sick. This
is all done by selecting the appropriate symbol at the
bottom of the display. Your pet will be judged at a
pet contest once a month and then placed as 1st,
2nd or 3rd. The game ends when your pet either runs
away or you abandon it by not feeding it for more
than 5 days.
When you start a new game, pressing the left or
right soft key scrolls through the available pets and
then press
to select the pet and start the
game. The game starts by showing the house were
the pet lives. A sun or moon at the window shows
whether it is day or night. Selecting the ? option at
the bottom of the display will show you the status of
your pet.
112
You can use your phone as a Web Browser.
You can obtain up-to-date news, weather, sport, and
other information as well as use e-mail and other
Internet services.
Please contact your service provider to open your
Internet account. To use the Web Browser, you must
indicate your phone number via the Own Number
menu option (5-1-2).
Home
Menu 8-1
To launch the browser from the idle mode, press
the
key in the centre of the scroll button.
Once connected, the homepage is displayed. The
content depends on the service provider.
To exit the browser at any time, press the
The idle screen is displayed.
key.
113
WWW Services
Bookmark
WWW Services
Menu 8-2
You can store the addresses of up to five Internet
sites for easy access using the Bookmark feature.
Three options are available.
Edit: allows you to create or edit a local bookmark.
1. Enter the required title (up to 16 characters).
Goto
Menu 8-3
You can open any WWW page by entering its URL
address.
Enter the URL address and press the G o soft key.
Navigating with the WAP Browser
2. Press the O K soft key.
3. Enter the URL address (up to 128 characters).
4. Press the O K soft key.
You can surf the Internet using either the phone keys
or the WAP Browser menu.
Go: allows you to open the selected page.
Using the Phone Keys
Delete: allows you to delete the selected bookmark.
When surfing the Internet, the phone keys function
differently from the phone mode.
To...
Scroll each line of the
content area
114
Then press the...
or
key.
Return to the previous page
key (except on
the homepage).
Return to the startup
homepage
key and hold it
down anywhere.
115
WWW Services
WWW Services
Using the WAP Browser Menu
Show URL: shows the URL of the current page.
There are various menu options available when surfing
the Wireless Web.
Homepage: moves to the homepage.
To access the WAP Browser menu, proceed as follows.
Offline Services: allows you to copy and save Web pages so
that you can view them, even if the network is down.
1. Press
.
A list of menu options appears.
Outbox: stores outgoing requests from the browser so that
they can be processed at a later date.
2. Highlight the required option using the
key.
or
3. Press the O K soft key to select the option.
Restart UP.Browser: clears the cache memory and displays
the homepage.
Encryption: allows you to check and generate the security
key required to contact a server.
4. If necessary, select the secondary option by pressing
the
or
key, followed by O K.
Note: The WAP Browser menus may vary, depending on
your version of the browser.
The following options are available.
Reload: reloads the current page.
Home: takes you back at any time to the homepage of
the Wireless Web service provider.
Bookmarks: allows you to load a bookmarked Web
page directly.
Mark Site: adds the current page to your bookmark list.
About Phone.com: shows the version of the WAP
Browser.
Entering Text, Numbers, or Symbols
When you are prompted to enter text, the current text entry
mode appears above the right soft key: abc/Abc/ABC, NUM
or SYM 1 ~ 4. To change modes, press the right soft key
until the required mode is displayed.
abc/Abc/ABC: allows you to enter lower-case and uppercase letters. You can switch between lower-and upper-case
letters by pressing the
key.
SYM1 ~ 4: allows you to enter various symbols and
punctuation marks. To view more symbols, press the More
soft key.
NUM: allows you to enter numbers.
Advanced...: gives you access to the following
advanced features. Some features may not be supported
by your network operator.
116
117
WWW Services
If you wish to edit text, move the cursor to the
required position, using
, and clear the wrong
letter by pressing the
key. Then enter the
correct letter.
Network Connection Information
To check the network connection time, press and
hold down the
key. You can see the
connection time on the last line of the content area.
The linger time is one or more minutes (depending on
your service provider). Consequently, if you do not
use the browser for one or more minutes, the
network is disconnected automatically. In this case,
you can see that the connection time is stopped at
that point.
The connection time is reset whenever you exit the
browser.
118
Additional Services
ALS(Alternate Line Service)
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to ALS.
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make and
receive calls on either line as required. If you
subscribe to this network service, a few additional
menu options enable you to set up this feature.
1. Selecting a Line
You can set a line for use, or manually for each call
with the Active Line Menu (5-1-12).
For further details, refer to page 83.
2. Editing the Line Name
You can edit the name of each line with the Own
Number Menu (5-1-2).
When you edit the name of a line, you can see the
name in every menu string which are shown as “Line
1” or “Line 2”. For further details, refer to page 79.
119
Additional Services
Solving Problems
3. Setting the Ring Type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each line
with the Ring Tone Menu (4-1).
See page 72 for further details.
4. Setting Call Diverting Options
You can set up call diverting with Call Diverting
Menu (5-2-1). This service enables incoming calls of
the line which you want to be reroute to the number
that you specify. Please see page 84 for further
details.
Before contacting after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
When you switch your phone on, the following
messages appear
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The option requiring that the PIN be entered each
time the phone is switched on has been enabled.
You must enter your PIN and then disable this
option if so required.
Enter PUK
• The PIN code was entered wrongly three times in
succession and the phone is now blocked. Enter
the PUK supplied by your network operator.
120
121
Solving Problems
“No service” is displayed
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was not dialled
• Have you pressed
?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (
pressed for more
than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you speaking
• Have you switched off the microphone (Mute
appears)?
• Are you holding the phone close enough to your
mouth? The microphone is located in the bottom
right side of the phone.
122
Solving Problems
The phone starts beeping and “**Warning** Battery
Low” flashes in the display
• The battery is insufficiently charged. Replace the
battery and recharge it or connect the battery
charger.
The audio quality of the call is poor
• Check the signal strength indicator in the display ( );
the number of bars after it indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialled when you recall a phonebook
entry
• Check that the numbers have been stored correctly,
by using the Phonebook Search feature.
• Re-store them, if necessary.
If the above guidelines do not enable you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or SAMSUNG
after-sales service.
123
Reference Information
Reference
Information
Access Codes
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
The access codes (except for the PUK and PUK2
codes) can be changed using the Security Settings
menu (5-3) options. See page 94 for further details.
Phone Password
This security code can be used to avoid unauthorised
use of the phone. The security code 0000 is the
factory default setting but you are advised to change
the security code before you start using your phone.
Keep the new code secret and in a safe place, which
is separate from the phone.
If you key in an incorrect security code five times in
succession, the phone will not accept the correct
code for the next five minutes.
124
PIN code
The PIN (Personal Identification Number) code protects
your SIM card against unauthorised use. The PIN code
is usually supplied with the SIM card. When the PIN
code request is enabled (Menu 5-3-1), the code is
asked each time the phone is switched on.
If you key in an incorrect PIN code three times in
succession, key in the PUK code and press the OK soft
key. Key in a new PIN code and press the OK soft key.
Key in the new PIN code again and press the OK soft
key.
PIN2 code
The PIN2 code, supplied with some SIM cards, is
required to access some functions, such as charging
unit counters. These functions are only available if
supported by your SIM card.
If you key in an incorrect PIN2 code three times in
succession, key in the PUK2 code and press the OK soft
key. Key in a new PIN2 code and press the OK soft
key. Key in the new PIN2 code again and press the OK
soft key.
125
Reference Information
Reference Information
Health and Safety Information
PUK code
The PUK (Personal Unblocking Key) code is required
to change a blocked PIN code. The PUK code may be
supplied with the SIM card. If not, contact your local
service provider.
If you key in an incorrect PUK code ten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
You cannot change the PUK code. If you lose the
code, contact your service provider.
PUK2 code
The PUK2 code, supplied with some SIM cards, is
required to change a blocked PIN2 code.
If you key in an incorrect PUK2 code ten times in
succession, you cannot use the functions requiring
the PIN2 code. Contact your service provider for a
new card.
You cannot change the PUK2 code. If you lose the
code, contact your service provider.
Exposure to Radio-Frequency Energy
(SAR Information)
This model phone meets the EU Requirements for
exposure to radio waves.
Your mobile phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
limits for exposure to radio-frequency (RF) energy
recommended by the EU Council. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed by
independent scientific organisations through periodic
and through evaluation of scientific studies. The
limits include a substantial safety margin designed to
ensure the safety of all persons, regardless of age
and health.
The exposure standard for mobile phones employs a
unit of measurement known as SAR(the Specific
Absorption Rate). The SAR limit recommended by the
EU Council is 2.0W/kg *.
Barring Password
The 4-digit barring password is required when you use
the Call Barring function. You obtain the password
from your service provider when you subscribe to this
function.
* The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/kg) averaged
over ten gram of body tissue. The limit incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in measurements. The SAR
values may vary depending on the national reporting requirements and the network band.
126
127
Reference Information
Reference Information
Precautions When Using Batteries
Tests for SAR are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operation can be well below the
maximum value. This is because the phone is designed
to operate at multiple power levels so as to use only
the power required to reach the network. In general,
the closer you are to a base station, the lower the
power output of the phone.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE
Derective must be shown. This directive includes as
one of its essential requirements the protection of the
health and safety for the user and any other person.
Your phone is powered by a rechargeable Li-ion
standard battery.
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
128
129
Reference Information
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and - terminals of the battery (metal strips
on the back of the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Reference Information
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice - almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, on that every user must
uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of
a car, practice good common sense and remember
the following tips:
1. Get to know your wireless phone and its features
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands free device. If
possible, add an additional layer of convenience and
safety to your wireless phone with one of the many
hands free accessories available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without removing
your eyes from the road. If you get an incoming call
at an inconvenient time, if possible, let your voice
mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic
or hazardous weather conditions. Rain, sleet, snow,
ice, and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or flipping
through your address book takes attention away from
your primary responsibility, driving safely.
130
131
Reference Information
Reference Information
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road and
your mirrors, then continue.
Operating Environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference of danger.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and
suspend conversations that have the potential to
divert your attention from the road.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
8. Use your wireless phone to call for help. Dial
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a
free call on your wireless phone!
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it is
recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives are
in danger, call emergency number, as you would
want others to do for you.
10. Call roadside assistance or a special nonemergency wireless assistance number when
necessary. If you see a broken-down vehicle posing
no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a
vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless
number.
132
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone.
consult the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum separation of 6 inches (15 cm) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
133
Reference Information
with the independent research by and recommendations of Wireless Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 6
inches (15cm) from their pacemaker when the
phone is switched on;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the pacemaker to
minimize the potential for interference.
• If you have any reason to suspect that
interference is taking place, switch off your
phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such interference,
you may want to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to determine
if they are adequately shielded from external RF
energy. Your physician may be able to assist you in
obtaining this information. Switch off your phone in
health care facilities when any regulations posted in
these areas instruct you to do so.Hospitals or health
care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
134
Reference Information
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices so require.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instrutions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refueling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats; chemical transfer or storage
facilities; vehicles using liquefied petroleum gas
(such as propane or butane); areas where the air
contains chemicals or particles, such as grain, dust
or metal powders; and any other area where you
would normally be advised to turn off your vehicle
engine.
135
Reference Information
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely upon any wireless phone for essential
communications (for example, medical emergencies).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or other official emergency
number). Emergency numbers vary by location.
3. Press the <SEND> key.
If certain features are in use (keyguard, restrict calls,
etc.), you may first need to turn those features off
before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident - do not cut
off the call until given permission to do so.
136
Reference Information
Other Important Safety Information
• Only qualified personnel should service the
phone, or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty which may apply to
the unit.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or
portable wireless equipment in the area over the
air bag or in the air bag deployment area. If in
vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury
could result.
• Switch off your phone before boarding an
aircraft. The use of wireless phones in aircraft
may be dangerous to the operation of the
aircraft, and may be illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services
to the offender, or legal action, or both.
137
Reference Information
Reference Information
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you to fulfill any
warranty obligations and allow you to enjoy this
product for many years. When using your phone,
battery, charger, or any accessory:
• Keep it and all its parts and accessories out of
small children’s reach.
• Keep it dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic
circuits.
• Do not use or store it in dusty, dirty areas as its
moving parts can be damaged.
• Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean it. Wipe it with a soft
cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint it. Paint can clog the device’s moving
parts and prevent proper operation.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications of
attachments could damage the phone and may
violate regulations governing radio devices.
• If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if neccessary, arrange for service.
• Do not store it in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store it in cold areas. When the phone
warms up (to its nomal operating temperature),
moisture can form inside the phone, which may
damage the phone’s electronic circuit boards.
• Do not drop, knock or shake it. Rough handling
can break internal circuit boards.
138
139
Glossary
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone, here
are a few definitions.
Active Folder
Ability to voice dial or voice command immediately on
opening the phone.
ALS(Alternate Line Service)
ALS provides the capability of associating two
alternate lines with one SIM card. You can make and
receive calls on either line as desired with this
service.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another mobile or fixed line.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Line Identification Services
Service allowing subscribers to view or block the
telephone numbers of callers.
Multi-party Calling
Ability to establish a conference call involving up to
five additional parties.
Phone’s Password
Security code used to unlock the phone when you
have selected the option to lock it automatically each
time it switches on.
PIN (Personal Identification Number)
Security code that protects the phone/SIM against
unauthorised use. The PIN is supplied by the service
provider with the SIM card. It may be a four to eightdigit number and can be changed, as required.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
140
141
Glossary
Glossary
PUK (PIN Unblocking Key)
Soft Keys
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
and
on the phone, the purpose of which:
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and memory
information, as well as the subscriber’s personal
data). The SIM card fits into a small slot on the back
of the phone and is protected by the battery.
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available, plays
a greeting (optionally in your own voice) and records
a message.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to speak
to the correspondent. The message created or
received (up to 160 characters long) can be
displayed, received, edited or sent.
142
143
Index
Index
A
Access codes • 124
Accessories • 7
Active Folder • 82
Active Line • 83
Alarm (6-2) • 101
Alert Type (4-4) • 75
ALS • 119
Any-key Answer • 80
Auto Answer • 81
Auto Redial • 81
B
Backlight • 13; 80
Barring
calls • 87
password • 126
Batteries
charging • 17
installing • 15
low battery indicator • 19
precautions • 129
Broadcast (2-6) • 63
Browser Settings (5-5) • 98
C
Calculator (6-3) • 103
Calendar (6-5) • 106
Call Barring • 87
Call Cost (1-5) • 57
Caller ID • 82
Calls
answering • 25
answering a second
call • 31
barring • 87
cost (1-5) • 57
dialled (1-3) • 56
diverting • 84
emergency • 132
ending • 23
holding • 30
international • 22
making • 22
missed • 26; 55
144
multiparty • 32
received (1-2) • 55
records (1) • 55
searching for a number in
the phonebook • 40
time (1-4) • 56
via the phonebook • 23
waiting • 89
Call Time (1-4) • 56
Call Waiting • 31; 89
Care • 138
Changing
passwords • 95
PIN • 95
PIN2 • 96
Characters
entering • 42
Charging batteries • 17
Clock (6-7) • 108
Closed User Group • 92
Conference calls
• See Multiparty calls
Connect Tone (4-9) • 77
Connect to Voice
Mail (2-1) • 58
Contrast • 97
Copying phonebook
numbers • 38
Cost of calls(1-5) •57
CUG (9-6)• 92
D
Date setting (6-7) • 108
Deleting
melody • 74
messages • 60
missed calls • 26
phonebook entries • 38
voice commands • 70
voice dial numbers • 69
voice memos • 71
Dialled Calls (1-3) • 56
Dialling • 22
voice • 23; 67
Display
external • 9;13
icons • 12
layout • 8
Diverting calls • 84
E
L
Earmicrophone • 21
Earpiece volume • 24
Emergency calls • 136
Entering text • 42
Error Tone (4-7) • 77
FDN Mode • 96
Fixed Dial Number
mode • 96
Functions
selecting • 49
Language • 79
Last number redialling • 23
LCD
display • 11
settings • 97
Length of calls • 56
Letters
entering • 42
Line Identification • 91
Locking
phone • 95
SIM card • 96
Low battery indicator • 19
G
M
F
Games (7) • 109
Glossary • 140
Greeting Message • 78
H
Holding calls • 30
I
Icons • 12
Identifying a caller • 82
Information numbers • 41
Input mode
changing • 43
setting • 79
International calls • 22
Internet • 113
K
Key tones
adjusting • 24
muting • 34
selecting • 76
sending • 34
Keypad Tone (4-5) • 76
Keys
location • 8
purpose • 9
Maintenance • 138
Melody composer (4-2) • 73
Menu
scrolling • 51
structure • 52
Message Tone (4-6) • 76
Messages • 58
broadcast (2-6) • 63
greeting • 78
picture (2-7) • 65
preset (2-4) • 62
reading • 59
ring tone • 72
setup (2-5) • 62
voice (2-1) • 58
writing (2-3) • 61
Microphone mute • 28
Minute Minder (4-8) • 77
Missed calls (1-1) • 55
deleting • 27
editing the number • 27
viewing • 26; 55
Multiparty calls
dropping a
participant • 33
making • 32
private conversation • 32
Mute
key tones • 34
microphone • 28
145
Index
N
Names
entering • 42
searching/dialling • 40
storing • 35
Network Selection • 90
Network Services (5-2) • 84
Number
caller • 82
own • 79
searching/dialling • 40
storing • 35
voice dial • 23; 67
O
Organiser (6) • 99
Options
selecting • 49
Own Number • 79
P
Password
barring • 126
changing • 95
phone • 124
Pasting phonebook
numbers • 37
Personal Identification
Number • See PIN
Phone
layout • 8
lock • 95
password • 124
Settings (5-1) • 78
Phonebook • 35
copying numbers • 38
deleting recorded
names • 37
dialling • 40
editing numbers • 38
erasing numbers • 38
making calls • 22; 40
pasting numbers • 37
playing recorded
names • 37
searching • 40
146
Index
storing numbers/
names • 35
voice recording • 37
PIN • 125
changing • 95
checking • 94
PIN2 • 125
changing • 96
Preset Message
List (2-4) • 62
Problem, solving • 121
PUK • 126
PUK2 • 126
R
Read Messages (2-2) • 59
Received Calls (1-2) • 55
Recording
answering message • 71
memos • 70
voice commands • 70
voice dial names • 68
voice dial numbers • 68
Records
call (1) • 55
Redialling
automatically • 81
last number • 23
Reference information • 124
Replaying memos • 71
Reset Settings • 83
Ring Tone (4-1) • 72
Ring Volume (4-3) • 75
Roaming • 142
Setting
alarm • 101
date • 108
text language • 79
time • 108
Settings
LCD (5-4) • 97
phone (5-1) • 78
reset • 83
security (5-3) • 94
Setup (2-5) • 62
SIM card
installing • 15
locking • 96
SIM Lock • 96
SMS messages • 34
Solving problems • 121
Switching on/off • 20
playing recorded
names/numbers • 69
recording • 68
Voice functions (3) • 67
Voice language
selecting • 79
Voice mail (2-1)
connecting to • 58
server number • 59
Voice Memo (3-3) • 70
deleting • 71
recording • 71
replaying • 71
Voice Server Number • 59
Volume
adjusting • 24
selecting the ring
(4-3) • 75
T
W
Text
entering • 42
input modes • 42
language • 79
Time
setting • 108
world (6-6) • 107
To Do List (6-4)• 105
Tone
connect (4-9) • 77
error (4-7) • 77
keypad (4-5) • 76
message (4-6) • 76
ring (4-1) • 72
Travel adapter • 17
World Time (6-6) • 107
Write Messages (2-3) • 61
WWW Services (8) • 113
S
U
Safety
batteries • 129
information • 127
precautions • 5
Scheduler (6-1) • 99
Second call • 31
Security Settings (5-3) • 94
Selecting functions/
options • 49
Sending key tones • 34
Service directory • 39
Service light • 14; 81
Unpacking • 7
User groups • 92
V
Voice command (3-2) • 70
Voice dial (3-1) • 21; 67
activating • 68
deleting numbers • 69
147
148
149
➄ Press the OK soft key to
confirm.
➃ Scroll with
or
through the list of setting
options until
the required option is
selected.
➂ Press the Select soft
key.
➁ Scroll with
or
through the list of menus
until you reach the
required menu.
➀ Press the Menu soft key.
• Each of the two soft keys (
and
)
performs the function indicated by the
text above it (bottom line in the display).
How to
Access
the Menu
Function
End a Call
(Direct Call)
Make a Call
.
Briefly press
➁ Say the name.
.
➀ Open the phone.
Provided that the name
is recorded and the
Active Folder menu
option (5-1-10) is set to
Voice Dial:
(Voice Dial)
➁ Press
➀ Key in the number.
Press and hold down
Switch On/Off
Quick Reference Card
SGH-T100 GSM Telephone
.
Answer a
Call
Adjust the
Volume
Store
Numbers
in the
PhoneBook
Open the phone
or
Press
.
Press the volume key on
the left side of the
phone.
➀ Type in the number.
➁ Press the Save soft
key.
➂ Enter the name.
➃ Press the Save soft
key.
➄ If necessary, change
the location.
➅ Press the OK soft key.
➁ Press the Options soft key.
➀ Press the PhoneBook soft
key.
➄ To make a call,
press
.
➃ To scroll through the
names, press
or
.
➂ Press the Find soft key.
Search for a ➀ Press the PhoneBook
soft key.
Number
in the
➁ Enter the start of the
name.
PhoneBook
Record a
Name for
Voice
Dialling
➂ Select the Voice Record
option.
➃ Record the name and
follow the instructions.
150
Download PDF