Samsung | SGH-V200 | Samsung SGH-V200 User Manual

* Some of the contents in this manual may differ from your phone,
depending on the software installed or your service provider.
TRI BAND
GPRS TELEPHONE
SGH-V200
ELECTRONICS
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.: GH68-04870A
English. 01/2004. Rev. 1.0
Contents
Important Safety Precautions ...................... 7
Unpacking .................................................... 9
Your Phone ................................................ 10
Phone Layout .................................................... 10
Display............................................................. 13
Service Light..................................................... 16
Getting Started .......................................... 17
Installing the SIM Card....................................... 17
Charging the Battery.......................................... 19
Switching the Phone On/Off ................................ 23
Call Functions ............................................ 24
Making a Call ....................................................
Adjusting the Volume .........................................
Answering a Call................................................
Viewing Missed Calls ..........................................
Quickly Switching to the Silent mode....................
24
26
27
28
30
Selecting Functions and Options ................ 31
Phonebook ................................................. 33
Storing a Number with a Name............................
Using Phonebook Entry Options ...........................
Searching for a Number in Phonebook .................
Editing a Caller Group ........................................
Speed-Dialling...................................................
Checking the Memory Status...............................
33
35
37
39
40
41
Entering Text ............................................. 42
Changing the Text Input Mode ............................
Using the T9 Mode .............................................
Using the Upper/Lower-Case
Character Mode .................................................
Using the Symbol Mode ......................................
Using the Number Mode .....................................
2
43
44
45
47
47
3
Contents
Contents
Options During a Call ................................. 48
Camera ...................................................... 83
Putting a Call on Hold.........................................
Switching the Microphone Off (Mute) ....................
Muting/Sending Key Tones..................................
Sending DTMF Tones..........................................
Searching for a Number in Phonebook .................
Using the Message Service..................................
Answering a Second Call.....................................
Making a Multi-party Call ....................................
Take and Send (Menu 4.1) .................................... 83
New Photo (Menu 4.2) .......................................... 84
My Photos (Menu 4.3)........................................... 85
48
49
50
50
51
51
52
52
Sound Settings........................................... 86
Accessing a Menu Function by Scrolling ................ 55
Accessing a Menu Function by Using its Shortcut ... 56
List of Menu Functions........................................ 56
Ring Tone (Menu 5.1) ...........................................
Ring Volume (Menu 5.2) .......................................
Alert Type (Menu 5.3)...........................................
Keypad Tone (Menu 5.4).......................................
Message Tone (Menu 5.5) .....................................
Folder Tone (Menu 5.6) ........................................
Power On/Off (Menu 5.7) ......................................
Extra Tones (Menu 5.8) ........................................
Text Messages ........................................... 61
Phone Settings........................................... 91
Inbox (Menu 1.1) .................................................
Outbox (Menu 1.2) ...............................................
Write New (Menu 1.3) ...........................................
Templates (Menu 1.4) ..........................................
Settings (Menu 1.5)..............................................
My Objects (Menu 1.6) .........................................
Memory Status (Menu 1.7) ...................................
Voice Mail (Menu 1.8) ...........................................
Broadcast (Menu 1.9) ...........................................
Infrared Activate (Menu 6.1) ................................. 91
My Settings (Menu 6.2) ........................................ 92
Greeting Message (Menu 6.3) ............................... 93
Own Number (Menu 6.4) ...................................... 93
Language (Menu 6.5) ........................................... 94
Security (Menu 6.6).............................................. 94
Display Settings (Menu 6.7) ................................. 97
Extra Settings (Menu 6.8) ..................................... 99
Short Cut (Menu 6.9)........................................... 100
Reset Settings (Menu 6.10) .................................. 100
Using the Menus......................................... 55
61
62
64
66
67
68
69
69
70
86
86
87
87
88
89
89
89
Picture Messages ....................................... 72
Inbox (Menu 2.1) .................................................
Outbox (Menu 2.2) ...............................................
Write New (Menu 2.3) ..........................................
Delete All (Menu 2.4)............................................
Setup (Menu 2.5) .................................................
MMS Profile (Menu 2.6).........................................
72
74
75
77
77
78
Organiser ................................................. 101
Calendar (Menu 7.1) ............................................
To Do List (Menu 7.2) ..........................................
Time & Date (Menu 7.3) ......................................
Alarm (Menu 7.4) ................................................
Calculator (Menu 7.5) ..........................................
Currency Exchange (Menu 7.6) ............................
101
103
106
107
108
109
Call Records ............................................... 80
Missed Calls (Menu 3.1) ........................................
Received Calls (Menu 3.2).....................................
Dialled Calls (Menu 3.3) ........................................
Delete All (Menu 3.4)............................................
Call Time (Menu 3.5) ............................................
Call Cost (Menu 3.6) .............................................
4
80
80
81
81
81
82
Network Services ..................................... 110
Call Diverting (Menu 8.1) .....................................
Call Barring (Menu 8.2) .......................................
Call Waiting (Menu 8.3) .......................................
Network Selection (Menu 8.4) ..............................
Caller ID (Menu 8.5) ............................................
110
112
114
115
116
5
Contents
Network Services (continued)
Closed User Group (CUG) (Menu 8.6) ................... 116
Band Selection (Menu 8.7) ................................... 118
Funbox ..................................................... 119
Games (Menu 9.1) .............................................. 119
WAP Browser (Menu 9.2) ..................................... 120
Downloads (Menu 9.3) ......................................... 126
Solving Problems ..................................... 127
Access Codes ........................................... 130
Phone Password ...............................................
PIN.................................................................
PUK ................................................................
PIN2 ...............................................................
PUK2 ..............................................................
130
131
131
132
132
Health and Safety Information ................. 133
Exposure to Radio-Frequency
Energy (SAR Information)..................................
Precautions When Using Batteries .......................
Road Safety .....................................................
Operating Environment .....................................
Electronic Devices.............................................
Potentially Explosive Atmospheres ......................
Emergency Calls...............................................
Other Important Safety Information ....................
Care and Maintenance .......................................
133
135
137
138
139
141
142
143
144
Glossary ................................................... 146
Index ....................................................... 150
Quick Reference Card ............................... 155
6
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Unpacking
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Your package contains the following items:
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
then press the
key. If certain feature are in use,
deactivate those features before you can make an
emergency call. Give all the necessary information
as accurately as possible. Do not cut off the call
until given permission to do so.
Handset
Travel Adapter
Water Resistance
Battery
Your phone is not water-resistance. Keep it dry.
User’s Manual
Accessories and Batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories
could damage your phone and may be dangerous.
Ear-microphone
Qualified Service
Only qualified service personnel may install or
repair your phone.
For more detailed safety information, see “Health
and Safety Information” on page 133.
8
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
•
•
•
•
•
•
•
•
Earphone
Simple hands-free kit
Standard/slim batteries
Cigarette lighter adapter
Holster
Software CD-ROM
Data Cable
Battery Charger
9
Your Phone
Your Phone
Key(s)
Phone Layout
In Menu Mode, scroll through the menu
options and the Phonebook memory.
The following illustrations show the main elements
of your phone:
In Idle Mode, allow you to access your
favourite menu options directly. For
further details about shortcuts, see
page 100.
Earpiece
Folder
Description
In Menu Mode, returns to the previous
menu level and selects the current
menu respectively.
Display
When entering text, moves the cursor
to the left and right respectively.
In Idle Mode, allow you to access your
favourite menu options directly. For
further details about shortcuts, see
page 100.
Navigation
keys
Camera key
Soft key (right)
Soft key (left)
WAP Browser
key
Ear-microphone
jack
Dial/menu
confirmation key
Volume/menu
browse keys
Cancel/
correction key
IrDA port
Power on/off /
menu exit key
Alphanumeric
keys
Microphone
Special
function keys
Antenna
(soft keys)
Perform the functions indicated by the
text above them, on the bottom line of
the display.
In Idle Mode, accesses the Camera
menu to allow you to use the camera
on your phone.
In Idle Mode, launches the WAP
(Wireless Application Protocol) browser
directly.
Camera module
Deletes characters from the display.
External display
Service light
10
In Menu Mode, returns to the previous
menu level.
11
Your Phone
Key(s)
Your Phone
Description (continued)
Display
Makes or answers a call.
In Idle Mode, recalls the last number
dialled or received when held down.
Display Layout
The display has three areas:
In Menu Mode, selects a menu function
or stores information that you have
entered, such as a name in the phone
or SIM memory.
Icons
Ends a call. Also switches the phone on
and off when held down.
Text and
graphic area
In Menu Mode, cancels your input and
returns to Idle Mode.
Menu
Name
In Idle Mode, quickly accesses your
voice mail when held down.
Enter numbers, letters and some
special characters.
Area
Description
First line
Displays various icons. See
page 14.
Middle lines
Display messages, instructions
and any information that you
enter, such as number to be
dialled.
Last line
Shows the functions currently
assigned to the two soft keys.
Enter special characters.
Perform various functions.
(on the side of the phone)
During a call, adjust the earpiece
volume.
Soft key
indications
In Idle Mode, adjust the key volume.
In Menu Mode, scroll through the menu
options and the Phonebook memory.
12
13
Your Phone
Icons
Icon
Your Phone
Icon
Description
Description
Appears when the mute mode is active.
Shows the received signal strength. The
greater the number of bars, the stronger
the signal.
Appears when you are connected to the
GPRS network.
Appears when a call is in progress.
Appears when the silent mode is active or
you set the Alert Type menu option
(Menu 5.3) so that the phone vibrates
when you receive a call. For further
details, see page 30 and page 87
respectively.
Appears when a new text message has
been received.
Appears when a new voice mail message
has been received.
Appears when you are entering text to
indicate the current text input mode.
Appears when you set an alarm to ring at
a specified time.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Appears when you are out of your home
area and have logged on a different
network; for example, when travelling in
other countries.
Backlight
A backlight illuminates the display and the keypad.
When you press any key or open the foler, the
backlight turns on. It turns off if no key is pressed
within a given period of time, depending on the
Back Light menu option. After one minute, the
display turns off to conserve your battery power.
To specify the length of time for which the backlight
is active, set the Back Light menu option (Menu
6.7.2). See page 97 for further details.
You can also set the phone to use the backlight only
during a specified period of time, in the Auto Light
menu option (Menu 6.7.3). See page 97 for
further details.
Appears when the IrDA port is active. For
details, see page 91.
14
15
Your Phone
Getting Started
External Display
Your phone has an external display on the cover. It
indicates that you have an incoming call or a
message. It also alerts you at the specified time
when you have set an alarm by turning its backlight
and showing corresponding icon on it.
Installing the SIM Card
Service Light
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches
or bending, so be careful when
handling, inserting or removing the
card.
The service light is below the external display on
the folder. It flashes when services are available on
the phone.
To activate or deactivate the use of the service
light, set the Service Light menu option (Menu
6.7.4). See page 98 for further details.
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
Keep all SIM cards out of the reach of
small children.
1. If necessary, switch off the phone by holding
down the
key until the power-off image
displays.
2. Remove the battery. To do so:
➀ Press the catch above the battery and hold it
in that position.
➁ Slide the battery and lift it away, as shown.
Service light
16
17
Getting Started
3. Slide the SIM card into the SIM card socket so
that it locks the card into position.
Make sure that the notched corner is top left and
the gold contacts of the card face into the
phone.
Getting Started
5. Slide the battery towards the top of the phone
until it clicks into place.
Make sure that the battery is properly installed
before switching the phone on.
Charging the Battery
Note: When you need to remove the SIM card, slide
it, as shown, and take it out of the socket.
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter and a battery charger come
with your phone. Use only approved batteries and
chargers. Ask your local Samsung dealer for further
details.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
Using the Battery Charger
4. Place the battery back, taking care to match the
tabs on the battery with the grooves on the
phone.
18
You can charge the battery by using the battery
charger.
19
Getting Started
1. Insert the battery into the charger, ensuring that
the terminals on the battery are in contact with
those on the charger. Press the battery until it
clicks into place.
Getting Started
4. When charging is finished, unplug the adapter
from both the power outlet and the charger.
5. Remove the battery from the charger.
2. Plug the connector of the travel adapter into the
jack at the bottom of the charger.
Using the Travel Adapter
3. Plug the adapter into a standard AC wall outlet.
The LED on the charger indicates the charging
progress with the following colours:
• Red: the battery is charging.
The travel adapter allows you to use the phone
while the battery is charging, but this causes the
phone to charge more slowly.
1. With the battery in position on the phone, plug
the connector of the travel adapter into the jack
at the bottom of the phone.
• Green: the battery is completely charged.
• Yellow: the battery is not correctly plugged in
or is operating at a too high or too low
temperature.
20
21
Getting Started
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter
from the power outlet and from the phone by
pressing the grey tabs on both sides of the
connector and pulling the connector out.
Getting Started
Switching the Phone On/Off
1. Open the folder.
2. Hold down the
switches on.
key until the phone
3. If the phone asks you to enter the phone
password, enter the password and press the OK
soft key. The phone password is preset to
“00000000” at the factory. For further details,
see page 130.
Note: You must unplug the adapter before removing
the battery from the phone during charging;
otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you hear a warning tone and a
message repeats at regular intervals on the display.
When the battery level gets too low, the phone
automatically turns off.
4. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 131.
The phone searches for your network, after
finding it, the idle screen, illustrated below,
appears on both displays. Now, you can make or
receive a call.
Service Provider
05:17
Sat 02 Oct
05:17
Sat/02
Menu
Name
Note: The display language is preset to English at the
factory. To change the language, use the
Language menu option (Menu 6.5). For
further details, refer to page 94.
5. When you wish to switch the phone off, hold
down the
key until the power-off image
displays.
22
23
Call Functions
Call Functions
Ending a Call
Making a Call
When you want to finish your call, briefly press the
key.
When the idle screen displays, enter the area code
and phone number, and press the
key.
Redialling the Last Number
Note: If you checked the Auto Redial option in the
Extra Settings menu (Menu 6.8), the
phone automatically redials up to ten times
when the person does not answer the call or is
already on the phone. See page 99 for further
details.
Making an International Call
1. Press and hold the
key.
The + character appears.
2. Enter the country code, area code and phone
number and press the
key.
Correcting the Number
To clear
the last digit
displayed
Press the
key.
any other digit
in the number
or key until the cursor is
immediately to the right of the
digit to be cleared. Press the
key. You can also insert a
missing digit simply by pressing
the appropriate key.
the whole
display
key and hold it for more
than one second.
24
The phone stores the numbers you dialled, received
or missed if the caller is identified. See “Call
Records” on page 80 for further details.
To recall any of these numbers:
1. If you have typed any characters on the display,
clear the display by holding down the
key for
more than one second.
2. Press the
key to display a list of the last
numbers in the order in which the calls were
made.
3. Use the
and
keys to scroll through the
numbers until the number you want highlights.
4. To
dial the number
highlighted
edit the number
highlighted
Press the
key.
Edit soft key and change
the number as required,
referring to “Correcting
the Number” on page 24
for further details.
25
Call Functions
Making a Call from the Phonebook
You can store the phone numbers that you use
regularly in the SIM card or the phone’s memory,
which are collectively called Phonebook. Simply
select the name you want to recall the associated
number. For further details about the Phonebook
features, see page 33.
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the
and
keys on the left side of
the phone.
Press the
key to increase the volume level and
the
key to decrease the level.
Call Functions
Answering a Call
When somebody calls you, the phone rings and
shows the incoming call animation.
If the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook,
displays.
1. If necessary, open the folder. Press the
key
or the Accept soft key to answer the incoming
call.
If the Anykey Answer option in the Extra
Settings menu (Menu 6.8) is checked, you
can press any key to answer a call except for
the
key and the Reject soft key. See
page 99.
If the Active Folder option in the Extra
Settings menu (Menu 6.8) is checked, you
can answer the call simply by opening the folder
(see page 99).
Note: To reject an incoming call, press and hold
the volume keys on the left side of the
phone before opening the folder.
2. End the call by closing the folder or pressing
the
key.
Note: You can answer a call while using Phonebook or
menu features.
In Idle Mode with the folder open, you can also
adjust the keypad tone volume using the
and
keys.
26
27
Call Functions
Call Functions
Viewing Missed Calls
Editing a Missed Call Number
When you are unable to answer a call for any
reason, you can find out who is calling you, if this
service is available, so that you can call the person
back.
The number of missed calls display on the idle
screen immediately after a call is missed.
To view the missed call immediately:
Note: When the number corresponding to the missed
call is not available, the Edit Number option
does not display.
1. Press the Options soft key.
2. Press the
or
Number option.
key to highlight the Edit
3. Press the Select soft key.
1. If the phone is closed, open the folder.
4. Change the number, as required.
2. Press the View soft key.
The number corresponding to the most recent
missed call displays, if available.
3. To
Press the
scroll through the
missed calls
or
call the number
displayed
key.
edit or delete a missed
call number
5. To
Press the
call the number
store the number
key.
key.
Save soft key and enter
the name and location
required. For further
details, see page 33.
Deleting a Missed Call
Select soft key. See
the following page.
1. Press the Options soft key.
2. If necessary, press the
the Delete option.
or
key to highlight
3. Press the Select soft key.
You can press the
Missed Call feature.
key at any time to exit the
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu
option (Menu 3.1). For further details, see
page 80.
28
29
Call Functions
Quickly Switching to the Silent mode
Silent Mode is convenient when discretion is
required and you wish to stop the phone from
making noise, in a theatre for example.
In Idle Mode, press and hold the
key until the
“Silent Mode” message and vibration icon ( )
display.
In the silent mode, your phone changes the sound
settings as follows:
Option
New Setting
Alert Type (Menu 5.3)
Vibration
Keypad Tone (Menu 5.4)
OFF
Message Tone (Menu 5.5)
Light Only
Folder Tone (Menu 5.6)
Off
Power Off Tone
Off
Extra Tones (Menu 5.8)
OFF
Selecting Functions
and Options
Your phone offers a set of functions that allow you
to customise it. These functions are arranged in
menus and sub-menus, accessed via the two soft
keys marked
and
. Each menu and submenu allows you to view and alter the settings of a
particular function.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current
role.
Example:
Service Provider
05:17
Sat 02 Oct
Menu
Name
To exit and reactivate the previous sound settings,
press and hold the
key again until “Exit Silent
Mode” appears. The vibration icon ( ) no longer
displays.
Note: When you turn the phone off, the silent mode is
automatically deactivated.
Press the left soft
key to access Menu
Mode.
30
Press the right soft
key to access the
Phonebook feature.
31
Selecting Functions and Options
Phonebook
To view various functions/options available and
select the one required:
1. Press the appropriate soft key.
2. To
Press the
select the:
• function displayed
• option highlighted
Select soft key or
the key.
view the next function
or highlight the next
option on a list
key or
key on
the left side of the
phone.
move back to the
previous function or
option on a list
key or
key on
the left side of the
phone.
move back up one level
in the structure
exit the structure
without changing the
settings
You can store phone numbers and their
corresponding names in the memory of your SIM
card. In addition, you can store up to 500 numbers
in the phone memory. The SIM card and phone
memories, although physically separate, are used
as a single entity, called Phonebook.
Storing a Number with a Name
key,
soft key or
key.
key.
In some functions, you may be asked for a
password or PIN. Enter the code you want and
press the OK soft key.
There are two ways to store a number:
• Using the Save soft key in Idle Mode
• Using the New Entry option in the Phonebook
menu
Storing a Number in Idle Mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in Phonebook.
1. Enter the number you want to store.
Note: If you make a mistake while entering a
number, correct it using the
key. For
further details, refer to page 24.
2. To save the number, press the Save soft key.
3. Select an icon to identify the category of the
number to be stored. Three categories are
available:
•
: Mobile phone number
•
: Office number
•
: Home number
To select the category, press the
press the Select soft key.
32
or
key, and
33
Phonebook
Phonebook
4. Enter a name and press the OK soft key.
The maximum length of a name depends on
your SIM card. For further details about how to
enter characters, see page 42.
5. Press the right soft key, labelled To Card or To
Phone to switch between the phone and card
memories.
Note: If you change phones, any numbers stored
in your SIM card memory are automatically
available with the new phone, whereas any
numbers stored in the phone’s memory
must be reentered.
Storing a Number Using the Phonebook
Menu
1. When the idle screen displays, press the Name
soft key.
2. Scroll to New Entry by pressing the
key and press the Select soft key.
or
3. Select an icon to identify the category of the
number to be stored by pressing the or key
and press the Select soft key.
Note: The E-mail icon ( ) is available in this
step. It allows you to save an E-mail
address instead of a phone number.
6. If you do not want to save the number and
name in the suggested location, press the
key to clear the location number and enter your
preferred location by pressing the number keys.
4. Continue the procedure from Step 4 on page 34
to store the number.
7. Press the OK soft key to store the name and
number.
Using Phonebook Entry Options
After storing, the phone displays the Phonebook
entry or name just created.
8. To
use the entry options
return to the idle
screen
34
While accessing any Phonebook entry, press the
Options soft key to access the options for the
entry.
Press the
Options soft key. For
details about the
option, see page 35.
key.
To
Press the
select the
highlighted option
Select soft key or the
key.
highlight a different
option
or
key until the
option you want highlights.
35
Phonebook
The following options are available:
Paste: allows you to paste the selected number
into the normal dialling mode. Use this option to
dial a number similar to one in Phonebook, such as
a different extension in the same office.
Use the
key to change the number as required;
see page 24 for further details. When you are ready
to dial, press the
key.
Phonebook
Searching for a Number in
Phonebook
After storing numbers in Phonebook, you can
search for them in two ways; by name and by caller
group.
Searching for a Number by Name
Edit: allows you to edit the name and/or number.
1. When the idle screen displays, press the Name
soft key.
Select One Entry to change one number in the
selected name. If you change the name, the
number is saved separately, select All Entry to
change the name of the entry.
2. Press the Select soft key when Search
highlights. You are asked to enter a name.
Erase: allows you to delete the name and number
from Phonebook. You are asked to confirm that you
wish to delete the name and number by pressing
the Yes soft key.
Copy: allows you to copy the number to another
location. Use this option to store a number similar
to one already in the memory; once copied, edit the
number and store it in Phonebook.
Caller Group: allows you to organise your
Phonebook entries in up to 10 caller groups so that
the phone alerts you in a way when a person from
one of your groups calls you. Select one of the ten
groups available.
To remove an entry from a group, select the No
Group option.
For further details about how to change caller group
properties, see page 39.
Add Entry: allows you to add a new number to the
currently selected name.
36
3. Enter the first few letters of the name that you
wish to find.
The Phonebook entries are listed, starting with
the first entry matching your input.
4. To
Press the
view the highlighted
entry
View soft key.
select a different
entry
or
key until the
entry you want
highlights.
look for a name
starting with a
different letter
key labelled with the
letter you want to
enter.
5. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phonebook entry options;
for further details, see page 35.
37
Phonebook
Phonebook
Searching for a Number by Caller Group
1. When the idle screen displays, press the Name
soft key.
Editing a Caller Group
1. When the idle screen displays, press the Name
soft key.
or
2. Scroll to Group Search by pressing the
key and press the Select soft key. You are
asked to enter a group name.
2. Scroll to Group Edit by pressing the
key and press the Select soft key.
3. Enter the first few letters of the group name that
you want to find.
3. Enter the first few letters of the group name you
want or scroll through the group list by pressing
the
or
key.
The caller groups are listed, starting with the
first group matching your input.
4. Scroll to a group by pressing the
or
key, if
necessary, and press the View soft key.
The Phonebook entries in the caller group are
listed.
5. To
Press the
view the
highlighted entry
View soft key.
select a different
entry
or
key until the
entry you want highlights.
6. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phonebook entry options;
for further details, see page 35.
or
4. When the group you want highlights, press the
Options soft key.
5. Select each option and change the settings, as
required. The following options are available:
• Call ring tone: allows you to set a ring tone
to be used when you receive a voice call from
a person in the group.
• SMS tone: allows you to set a ring tone to be
used when you receive a text message from a
person in the group.
• Graphic: allows you to set a graphic icon to
be displayed when you receive a voice call
from a person in the group.
• Group Name: allows you to assign a name to
the group. For further details about how to
enter characters, see page 42.
6. When you finish changing the settings, press the
or
key.
38
39
Phonebook
Phonebook
Speed-Dialling
Once you have stored phone numbers in the SIM
card, you can set up to eight speed-dial entries and
then dial them easily whenever you want, simply by
pressing the associated number key.
• Number: allows you to view the number
assigned to the key.
7. When you finish setting the options, press the
or
key.
Setting Up Speed-Dial Entries
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Speed Dial by pressing the
key and press the Select soft key.
• Erase All: allows you to clear the settings for
all keys so that no numbers are assigned to
any of the keys.
or
3. Select the key, to which you wish to assign the
speed-dialling number, from
to
keys
and press the OK soft key.
Note: If you have already assigned a number to
the key, the Options soft key replaces the
OK soft key. Go to Step 6.
4. Select a Phonebook entry from the list and press
the View soft key.
5. Select a number, if the entry has more than one
number, by pressing the
or
key and press
the Select soft key.
6. Once you have assigned a number to the key,
you can use the following options by pressing
the Options soft key:
• Change: allows you to assign a different
number to the key.
Speed-Dialling from Phonebook
To speed-dial the numbers assigned to keys,
, press and hold the appropriate key.
to
Note: Memory location 1 is reserved for your Voice
Mail server number.
Checking the Memory Status
You can check how many names and numbers are
stored in Phonebook; SIM card and phone
memories. You can also see the capacity of both
memories.
1. When the idle screen displays, press the Name
soft key.
2. Select the Memory Status option by pressing
the
or
key and press the Select soft key.
3. Press the
or
key to view the number of
existing and remaining entries in the card and
phone memories.
• Erase: allows you to clear the setting so that
no number is assigned to the key.
40
41
Entering Text
Entering Text
Changing the Text Input Mode
When using your phone, you will often need to
enter text, such as when storing a name in
Phonebook, creating your personal greeting or
scheduling events on your calendar. You can enter
alphanumeric characters by using your phone’s
keypad.
When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator on the display.
Example: Writing a text message
Your phone has the following text input modes:
Text input mode
indicator
• T9 mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter – when you press the
key once, J, K or L displays. The T9 mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the
correct word, thus requiring far fewer keystrokes
than the traditional upper/lower-case character
modes.
Options
918
• Upper/lower-case character modes
These modes allow you to enter letters by
pressing the key labelled with the letter you want
to enter once, twice, three or four times until it
displays.
• Symbol mode
This mode allows you to enter various symbols,
and special characters.
• Number mode
This mode allows you to enter numbers.
42
To select the
Press the
until
T9 mode
displays.
See page 44.
Upper-case character
mode
A displays.
See page 45.
Lower-case character
mode
a displays.
See page 45.
Symbol mode
displays.
See page 47.
Number mode
1 displays.
See page 47.
soft key
43
Entering Text
Using the T9 Mode
The T9 predictive text input mode allows you to key
in any character using single keystrokes. This text
input mode is based on a built-in dictionary.
1. When you are in T9 predictive text input mode,
start entering a word by pressing keys
to
. Press each key only once for one letter.
Entering Text
• To enter full stops, hyphens or apostrophes, press
the
key. The T9 mode applies grammar rules
to ensure that the correct punctuation is used.
Example:
L
is used twice to display two
punctuation marks:
e
t
’
s
e
a
t
.
Example: To enter “Hello” in the T9 mode,
press
,
,
,
and
.
• To shift the case in T9 mode, use the
The word that you are typing appears on the
display. It may change with each key that you
press.
• You can move the cursor by using the and
keys. To delete letters, press the
key. Press
and hold the
key to clear the display.
2. Enter the whole word before editing or deleting
the keystrokes.
3. If the word is correct, start entering the next
word.
Otherwise, press the
,
or
key
repeatedly to display alternative word choices
for the keys that you have pressed.
Example: both “Of” and “Me” have the sequence
,
. The phone displays the most
commonly used choice first.
key.
Using the Upper/Lower-Case
Character Mode
Use the
to
keys to enter your text.
1. Press the key labelled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
4. Put a space between words by pressing the
key.
• To type words not found in the T9 mode, change
the text input mode to the upper/lower-case
character input mode.
44
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move
to the right automatically, and then select the
next letter.
45
Entering Text
Entering Text
Refer to the table below for more information about
the characters available.
Key
Characters in the Order Displayed
Upper Case
1
Using the Symbol Mode
The symbol mode enables you to insert symbols
into a text message.
Lower Case
Space
2
3
4
5
6
OK
7
8
Use the navigation keys to scroll to the symbol you
want to enter and then press the OK soft key to
insert the highlighted symbol into your message.
9
0
Note: The characters available may be different
depending on your language setting(Menu
6.5)
• To insert a space, press the
key.
• You can move the cursor by using the and
key. Press
keys. To delete letters, press the
and hold the
key to clear the display.
46
918
Using the Number Mode
The number mode enables you to enter numbers
into a text message. Press the keys corresponding
to the digits you want to enter.
47
Options During a Call
Options During a Call
Your phone provides a number of control functions
that you can use during a call.
When you have finished, end each call normally by
pressing the
key.
Switching the Microphone Off (Mute)
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if your network supports this
service. When you have an active call and a call on
hold, you may switch between the two calls,
changing the one on hold to active and placing the
other on hold.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want,
by pressing the Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or
look it up in Phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or alternatively,
1. Put the current call on hold by pressing the
Hold soft key.
2. Make the second call in the normal way.
You can temporarily switch your phone’s
microphone off so that the other person cannot
hear you.
Example: You wish to say something to another
person in the room but do not want the
other person to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. If necessary, press the
Mute option.
key to highlight the
3. Press the OK soft key.
The other person can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the
Unmute option.
key to highlight the
3. Press the OK soft key.
The other person can hear you again.
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
48
49
Options During a Call
Muting/Sending Key Tones
Options During a Call
Searching for a Number in
Phonebook
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your
phone does not transmit the key tones. It allows
you to press keys without hearing annoying key
tones during a call.
You can search for a number in Phonebook during a
call.
Note: To communicate with answering machines or
computerised telephone systems, the Send
keys option must be selected.
2. Press the
option.
1. Press the Options soft key.
key to highlight the Phonebook
3. Press the OK soft key.
Sending DTMF Tones
The Phonebook entries are listed.
4. Enter the name that you wish to find.
You can send the DTMF (dual tone multi-frequency)
tones of the number on the display during a call.
This option is helpful for entering a password or
account number when you call an automated
system, like a banking service.
To send the DTMF tones:
1. When you are connected to the teleservice
system, press the Options soft key.
2. Press the
option.
key to highlight the Send DTMF
3. Press the OK soft key.
4. Enter the number you want to send and press
the OK soft key.
The tones of the displayed number are sent.
50
If you enter the first few letters of the name, the
Phonebook entries are listed, starting with the
first entry matching your input.
5. To view the highlighted entry, press the View
soft key.
For further details about the Phonebook feature,
see page 33.
Using the Message Service
If you receive an SMS (Short Message Service)
message during a call, the message icon (
)
flashes on the display. The Messages option
enables you to use this feature.
For further details about the message service, see
page 61.
51
Options During a Call
Options During a Call
Answering a Second Call
You can answer an incoming call while you have a
call in progress, if your network supports this
service and you have set the Call Waiting menu
option (Menu 8.3) to Activate; see Page 112.
You are notified of an incoming call by a call waiting
tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the
Swap soft key.
To end the call on hold, press the Options soft
key and select the End Held Call option.
3. To end the current call, press the
key.
Making a Multi-party Call
A multi-party call is a network service that allows
up to six people to take part simultaneously in a
multi-party or conference call. For further details,
contact your service provider.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
4. To add a new person to the multi-party call, call
the person in the normal way and press the
Options soft key. Select the Conference
option and press the OK soft key.
You can add incoming callers by answering the call,
pressing the Options soft key, and selecting the
Conference option. Repeat as required.
Having a Private Conversation With One
Participant
1. Press the Options soft key and choose the
Select one option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list by pressing
the
or
key, and press the Select soft key
or the
key.
3. When the Private option highlights, press the
OK soft key.
Now you can talk privately with that person. The
other participants can still converse with each
other.
4. To return to the multi-party call, press the
Options soft key and select the Conference
option. Press the OK soft key.
All the multi-party call participants can now hear
each other.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the OK soft key.
52
53
Options During a Call
Using the Menus
Dropping One Participant
1. Press the Options soft key and choose the
Select one option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person from the list, by pressing
the
or
key, and press the Select soft key
or the
key.
3. Press the
key to select the Remove option
and press the OK soft key.
The call ends with that participant, but you can
continue to talk with the other participants.
4. When you want to end the multi-party call, close
the folder or press the
key.
The phone offers a range of functions that allow you
to tailor it to your needs. These functions are
arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling with the navigation keys or by using the
shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle Mode, press the Menu soft key to access
Menu Mode.
2. Scroll with the
or
key to reach a main
menu, Phone Settings for example. Press the
Select soft key or the key to enter the menu.
3. If the menu contains any sub-menus,
Language for example, you can access them
by scrolling with the
or
key and pressing
the Select soft key.
If the menu that you have selected contains
further options, repeat this step.
4. To
scroll through
the menus
or
key, or use
the
and
keys on
the left side of the
phone.
confirm the
chosen setting
Select soft key or the
key.
return to the
previous menu level
soft key or the
key.
exit the menu without
changing the settings
54
Press the
key.
55
Using the Menus
Accessing a Menu Function by
Using its Shortcut
The menu items, such as menu, sub-menus and
options, are numbered and can be accessed quickly
by using their shortcut numbers. The shortcut
number is shown on the bottom right next to the
soft key on the display. Simply press the Menu soft
key and key in the required number.
Note: The numbers assigned to each menu option are
indicated on the list on page 57. They may not
match the menu number on the phone,
depending on the services supported by your
SIM card.
Using the Menus
1. Text Messages
1.1
1.2
1.3
1.4
1.5
1.6
1.7
Example: Accessing the Language option.
1. Press the Menu soft key.
2. Press
for Phone Settings.
3. Press
for Language.
1.8
1.9
The languages available display.
List of Menu Functions
The following list shows the menu structure
available and indicates the number assigned to
each option and the page where you can find a
description of each feature.
Note: If you use a SIM AT card that provides
additional services, the SIM AT menu
displays when you press the Menu soft key to
enter Menu Mode. For further details, see your
SIM card instructions.
(see page 61)
Inbox
Outbox
Write New
Templates
Settings
1.5.1 Setting 1*
1.5.2 Setting 2*
1.5.3 Setting 3*
1.5.4 Common Setting
My Objects
1.6.1 My EMS Melody
1.6.2 My EMS Picture
1.6.3 My EMS Animation
1.6.4 Delete All
Memory Status
1.7.1 SIM memory
1.7.2 PHONE memory
1.7.3 CB memory
1.7.4 Delete all
Voice Mail
1.8.1 Connect to Voice Server
1.8.2 Voice Server Number
Broadcast
1.9.1 Read
1.9.2 Receive
1.9.3 Channel List
1.9.4 Language
2. Picture Messages
2.1
2.2
2.3
2.4
2.5
2.6
(see page 72)
Inbox
Outbox
Write New
Delete All
Setup
MMS Profile
* Shown only if supported by your SIM card.
56
57
Using the Menus
Using the Menus
3. Call Records
(see page 80)
3.1
3.2
3.3
3.4
Missed Calls
Received Calls
Dialled Calls
Delete All
3.4.1 Missed Calls
3.4.2 Received Calls
3.4.3 Dialled Calls
3.5 Call Time
3.5.1 Last Call Time
3.5.2 Total Sent
3.5.3 Total Received
3.5.4 Reset Timers
3.6 Call Cost*
3.6.1 Last Call Cost
3.6.2 Total Cost
3.6.3 Max Cost
3.6.4 Reset Counters
3.6.5 Set Max Cost
3.6.6 Price/Unit
4. Camera
(see page 83)
4.1 Take and Send
4.2 New Photo
4.3 My Photos
5. Sound Settings
(see page 86)
5.1
5.2
5.3
5.4
5.5
Ring Tone
Ring Volume
Alert Type
Keypad Tone
Message Tone
5.5.1 SMS Tone
5.5.2 SMS-CB Tone
5.6 Folder Tone
5.7 Power On/Off
5.8 Extra Tones
5.8.1 Error Tone
5.8.2 Minute Minder
5.8.3 Connect Tone
58
* Shown only if supported by your SIM card.
6. Phone Settings
(see page 91)
6.1 Infrared Activate
6.2 My Settings
6.2.1 Wallpaper
6.2.2 Menu Style
6.3 Greeting Message
6.4 Own Number
6.5 Language
6.6 Security
6.6.1 PIN Check
6.6.2 Change PIN
6.6.3 Phone Lock
6.6.4 Change Password
6.6.5 SIM Lock
6.6.6 FDN Mode*
6.6.7 Change PIN2*
6.7 Display Settings
6.7.1 Brightness
6.7.2 Back Light
6.7.3 Auto Light
6.7.4 Service Light
6.7.5 Graphic Logo
6.8 Extra Settings
6.8.1 Auto Redial
6.8.2 Active Folder
6.8.3 Anykey Answer
6.9 Short Cut
6.10 Reset Settings
7. Organiser
(see page 101)
7.1 Calendar
7.2 To Do List
7.3 Time & Date
7.3.1 Set Time
7.3.2 Set Date
7.3.3 World Time
7.3.4 Time Format
7.4 Alarm
7.5 Calculator
7.6 Currency Exchange
* Shown only if supported by your SIM card.
59
Using the Menus
Text Messages
8. Network Services
(see page 110)
8.1 Call Diverting
8.1.1 Divert Always
8.1.2 Busy
8.1.3 No Reply
8.1.4 Unreachable
8.1.5 Cancel All
8.2 Call Barring
8.2.1 All Outgoing
8.2.2 International
8.2.3 International Except to Home
8.2.4 All Incoming
8.2.5 Incoming While Abroad
8.2.6 Cancel All
8.2.7 Change Barring Password
8.3 Call Waiting
8.3.1 Voice Calls
8.3.2 Data Calls
8.3.3 Cancel All
8.4 Network Selection
8.4.1 Automatic
8.4.2 Manual
8.5 Caller ID
8.5.1 Default
8.5.2 Hide Number
8.5.3 Send Number
8.6 Closed User Group
8.6.1 Index List
8.6.2 Outside Access
8.6.3 Default Group
8.6.4 Deactivate*
8.7 Band Selection
9. Funbox
(see page 119)
The SMS (Short Message Service) function is a
network service that may not be supported by your
network. You can send messages using text, fax,
Email and paging messaging systems, provided that
these services are supported by your network. To
send text messages by phone, you must obtain the
number of the SMS centre from your service
provider.
When the message icon (
) appears, you have
received new text messages. If the memory is full,
an error message displays and you cannot receive
any new messages. Use the Delete option in each
message box to delete obsolete ones.
Inbox
(Menu 1.1)
This message box is used to store the messages
that you have received.
When you enter this menu, the list of messages in
the box displays with the senders’ phone numbers
or names, if available in your Phonebook.
1. Select a message from the list and press the
View soft key to read the message contents.
2. To scroll through the contents, press the
key.
or
3. To scroll to the previous or next messages, press
the
or
key.
9.1 Games
9.2 WAP Browser
9.3 Downloads
9.3.1 Sounds
9.3.2 Pictures
* Shown only if the Closed User Group feature is active.
60
61
Text Messages
Text Messages
While reading a message, you can choose the
following options by pressing the Options soft key:
3. To scroll to the previous or next messages, press
the
or
key.
Delete: allows you to delete the message.
While reading a message, you can choose the
following options by pressing the Options soft key:
Send: allows you to resend the message. For
further details about how to send a message, see
page 64.
Reply: allows you to reply to the sender by sending
a text message.
Call Back: allows you to call the sender back.
Cut Address: allows you to extract the destination
number and URL/e-mail addresses or phone
numbers from the message text, so that you can
save them in your Phone’s memory.
Move To Phone/SIM: allows you to move the
message to another memory location, from the SIM
card to the phone’s memory or vice versa.
Select Objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can use the objects when writing a
message. For details, see page 65.
Outbox
Delete: allows you to delete the message.
Send: allows you to resend the message. For
further details about how to send a message, see
page 64.
Cut Address: allows you to extract the destination
number and URL/e-mail addresses or phone
numbers from the message text, so that you can
save them in your Phone’s memory.
Move To Phone/SIM: allows you to move the
message to another memory location, from the SIM
card to the phone’s memory or vice versa.
Select Objects: allows you to save media objects,
such as sounds or images, from the message into
your phone. You can use the objects when writing a
message. For details, see page 65.
(Menu 1.2)
This message box is used to store the messages that
you have already sent or will send.
When you enter this menu, the list of messages in
the box displays with the recipients’ phone numbers
or names, if available in your Phonebook.
1. Select a message from the list and press the
View soft key to read the message contents.
2. To scroll through the contents, press the
key.
62
or
63
Text Messages
Write New
Text Messages
(Menu 1.3)
In this menu option, you can write and send a text
message.
Note: You can enter up to 918 alphanumeric
characters for your message. When you add
objects to the message, the number of
characters you can enter decreases.
Creating a Simple Text Message
4. If you select a save option, choose the memory
where the message is saved and press the OK
soft key.
5. Enter a destination number and press the OK
soft key. The message is sent.
Creating a Message Using the Options
1. Create your message.
2. Press the Options soft key.
1. Create your message.
Note: For further details about entering
characters, see page 42.
2. When you finish entering the message, press
the Options soft key. The following options are
available:
• Send: allows you to send the message. The
message is deleted after sending.
• Save and Send: allows you to save a copy of
the message and then send the message. You
can read the message in your Outbox
• Save: allows you to save the message so that
it can be sent later. You can read the message
in your Outbox.
For further details about the Text Formatting,
Add Objects, Add Templates, Add
Phonebook, Add Bookmark and Language
options, see “Creating a Message Using the
Options” on page 65.
3. Select Send or Save and Send, and press the
Select soft key.
If you want to just save the message, select
Save. After saving the message, the phone
returns to the Messages menu.
64
3. Select one of the following options by using the
and
keys and pressing the Select soft
key:
• Text Formatting: allows you to format the
style of the text. For the Size attribute,
Normal, Large and Small sizes are
available. For the Underline and
Strikethrough attributes, select On or Off.
The attributes can be combined.
• Add Objects: allows you to add a sound,
melody, picture or animation to your message.
Select the category of the object to be added.
In each category, you can select the various
factory-set items or choose an item received
from other sources, such as the Internet or
other phones.
• Add Templates: allows you to apply one of
the preset message templates to the text.
Select one of five messages stored in the
Templates menu option (Menu 1.4). For
further details, see page 66.
• Add Phonebook: allows you to add a
Phonebook entry in your message. Select one
from the list.
65
Text Messages
Text Messages
• Add Bookmark: allows you to add a web
page’s address stored in your Favorites list
(Menu 9.2.2). Select one from the list.
• Language: allows you to change the
language to be used in the T9 input mode.
Select the language to be used.
4. Complete the message, and send or save it by
following the procedure from Step 3 on page 64.
Templates
(Menu 1.4)
Using this menu option, you can preset up to five
messages that you use most frequently.
Scroll through the template list using the
and
keys. When the message template you want
highlights, press the Options soft key.
The following options are available:
Edit: allows you to write a new message or edit the
message.
Note: For further details about how to enter
characters, see page 42.
Send Message: allows you to recall the message.
Once you have completed the message, you can
send, save and send, or simply save it. For further
details about how to send a message, see page 64.
Delete: allows you to delete the message. You are
asked to confirm the deletion by pressing the Yes
soft key.
Settings
(Menu 1.5)
In this menu option, you can set up default SMS
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card.
Note: The last setting you accessed is automatically
activated for sending messages.
Setting x (where x is the setting group number):
each group has its own sub-menu.
Service Centre: allows you to store or change the
number of your SMS centre which is required when
sending messages. You must obtain this number
from your service provider.
Default Destination: allows you to store the default
destination number. The number will automatically
display on the Destination screen when you create a
message.
Default Type: allows you to set the default message
type to Text, Fax, Email and Paging. The network
can convert the messages into the selected format.
Default Validity: allows you to set the length of time
your text messages are stored at the message
centre while attempts are made to deliver them.
Setting Name: allows to give a name to the setting
group currently being defined.
Common Setting: The following options are
available:
Reply Path: allows the recipient of your SMS
message to send you a reply message via your
message centre, if your network supports this
service.
66
67
Text Messages
Text Messages
Delivery Reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Bearer Selection: allows you to choose either GSM
or GPRS, depending on your current network.
My Objects
(Menu 1.6)
In this menu option, you can see the objects you
saved from messages into your phone’s memory by
using the Select Objects option.
Three categories of objects are available:
• My EMS Melody
• My EMS Picture
• My EMS Animation
You can delete all of the items using the Delete All
option (Menu 1.6.4).
To
Press the
select a category to
clear
or
key. To delete all
of your objects, select All
Object.
place a check mark
on the category
Mark soft key.
remove the check
mark
Unmark soft key.
delete the marked
objects
Delete soft key.
When a confirming message displays, press the
Yes soft key to confirm.
68
Memory Status
(Menu 1.7)
This menu option shows how many messages are
currently stored in the SIM, phone and CB (cell
broadcast) memories.
You can delete all of the messages in each message
box using the Delete all option (Menu 1.7.4).
To
Press the
select a message
box to clear
or
key. To delete all
of your messages, select
All Messages.
place a check mark
Mark soft key.
remove the check
mark
Unmark soft key.
delete the marked
messages
Delete soft key.
When a confirming message displays, press the
Yes soft key to confirm.
Voice Mail
(Menu 1.8)
This menu provides you with a way of accessing
your voice mailbox, if your network supports this
service.
The following options are available:
Connect to Voice Server: before using this
feature, you must enter the voice server number(s)
obtained from your service provider (see menu
option 1.8.2). You can then select a server number
from the list and press the OK soft key to listen to
your messages.
69
Text Messages
Text Messages
You can quickly connect to the first voice server by
pressing and holding the
key in Idle Mode.
Voice Server Number: allows you to change the
voice mail server number, if necessary.
1. Select a number location using the
and press the OK soft key.
or
key
2. Press the Name soft key.
3. To
Press the
enter the server
number
corresponding numeric
keys.
correct a digit
C key.
move the cursor
to the left/right
without clearing
the digit
or
key.
The following options are available:
Read: lets you view the received message.
Volatile displays the messages from the network,
but loses its contents as soon as the phone is
switched off. Scroll through the message by using
the
and
keys. While reading a message,
press the Save soft key to store the message in the
Archive box for later retrieval.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available:
Select: use to enable or disable channels on the list
by marking or unmarking them respectively.
Add Channel: use to enter the ID and title for a new
channel.
3. Press the OK soft key to save the number.
Delete: use to remove a channel from the list.
Note: Voice Mail is a network feature. Please contact
your service provider for further details.
Edit: use to change the ID and title of an existing
channel.
Broadcast
Language: allows you to select your preferred
language display cell broadcast messages.
(Menu 1.9)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages display as soon as they are
received, provided that:
Please contact your service provider for further
details.
• the phone is in Idle Mode.
• the Receive option is set to Disable.
• the message channel is currently active on the
channel list.
70
71
Picture Messages
Picture Messages
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides automatic and immediate
delivery of personal multimedia messages from
phone to phone or from phone to e-mail.
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and audio clips. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Using the MMS feature, your phone can receive
multimedia messages. You can also send picture
messages, which are short messages that contain
images, such as your photos or graphics you
downloaded from the Internet. This function is
available only if it is supported by your service
provider. Only phones that offer picture message
features can receive and display picture message.
Inbox
(Menu 2.1)
Viewing a Message When You Receive it
When a new multimedia message comes in, the
display shows the text notification along with the
sender’s number.
1. Press the Select soft key to view the message.
The display shows brief information about the
message, such as the sender’s number, the
message size and the subject.
If you want to view the message later in Inbox,
press the Exit soft key.
72
2. To scroll through the message, press the
key.
or
While viewing a message, press the Options soft
key to use the following options:
Retrieve: shows you the message contents.
Delete: deletes the message.
More Information: shows you detailed
information about the message.
Viewing a Received Message in the Inbox
When you access the Inbox menu option (Menu
2.1), the list of multimedia messages you received
displays with the senders’ phone numbers, if they
are available in your Phonebook, or subjects.
1. Select the message and press the Select soft
key to view the message.
2. To scroll through the message, press the
key.
or
While viewing a message, you can choose the
Message options by pressing the Options soft key.
If you are viewing a new message, the options are
the same as when you view a message as soon as
you receive it. See the previous section.
When you are reviewing a message, the following
options are available:
Delete: deletes the message.
Reply: allows you to reply to the sender by
sending a text or picture message.
Call Back: allows you to call the sender back.
73
Picture Messages
Picture Messages
Cut Address: allows you to extract the destination
numbers or address from the message, so that you
can dial a number or save one of them in
Phonebook.
Forward: allows you to forward the message to
another person.
Save Picture: allows you to save an image from
the message into your phone. Images are in the
Pictures folder in the Downloads menu (Menu
9.3)
Save Sound: allows you to save a sound from the
message into the Sounds folder in the
Downloads menu (Menu 9.3).
Outbox
(Menu 2.3)
This menu option allows you to create a new picture
message and then send it to multiple destinations.
Creating and Sending a Picture Message
1. Enter the subject of your message and press the
OK soft key.
For further details about entering characters,
see page 42.
2. Press the Options soft key and add the
message contents using one of the following
options:
• Add Text: enter the message text and press
the OK soft key.
(Menu 2.2)
When you access this menu option, the list of the
picture messages you sent displays.
1. Select a message you want and press the
Select soft key to view the message contents.
2. To scroll through the message, press the
key.
Write New
or
While viewing a message, you can use the following
options by pressing the Options soft key:
Delete: deletes the message.
Cut Address: allows you to extract the destination
numbers or address from the message, so that you
can dial a number or save one of them in
Phonebook.
• Add My Photo: allows you to add a picture
you took using the camera on your phone.
Select a picture and press the View soft key.
Then, press the Select soft key to add. For
further details about using the camera, see
page 83.
• Add Picture: allows you to add a picture
stored in the Pictures folder in the
Downloads menu (Menu 9.3). Choose a
picture and press the Select soft key.
• Send: allows you to send the message. Use
this option when you finish creating the
message.
• Save: saves the message in your Outbox
(Menu 2.2) for later use. Use this option
when you finish creating the message.
Send: allows you to resend the message.
Edit Message: allows you to change the message
contents, picture or text.
74
75
Picture Messages
3. When the added content displays, press the
key to highlight Add Here.
4. Repeat steps 2 and 3 until you finish creating
your message.
Picture Messages
10.If you want to send the message to multiple
destinations, select Add Destination and
press the Select soft key.
11.Repeat steps 7 to 10. You can enter up to 10
destinations.
5. If you want to change the added items, press
the
or
key to highlight one and press the
Options soft key.
If you want to edit the destinations, select one
and press the Select soft key. You can change
or delete it.
The following options are available:
• Edit: allows you to change text or replace the
image with another.
12.After entering the destinations, press the OK
soft key when Send Message highlights.
• Delete: deletes the item from your message.
Your phone sends the message.
• Send: allows you to send the message.
• Save: saves the message in your Outbox
(Menu 2.2) for later use.
Delete All
(Menu 2.4)
6. When you finish creating the message, select
Send from the options.
You can delete all of the messages in your Inbox or
Outbox.
7. Choose one of the following options and press
the Select soft key:
When a confirming message appears, press the
Yes soft key to confirm.
• Phone Number: allows you to enter a phone
number you want.
• E-mail: allows you to enter the e-mail
address of the recipient to send the message
as an e-mail.
• Phone Book: allows you to recall a phone
number from your Phonebook.
8. Enter a number or an address, or select a
number in Phonebook.
9. When the correct number or address displays,
press the OK soft key.
76
Setup
(Menu 2.5)
You can change the default message settings.
To turn a given
option
Press the
on
Select soft key.
A check mark displays in
front of the option.
off
Select soft key.
The check mark no longer
displays.
77
Picture Messages
Picture Messages
The following options are available:
Hide ID: When this option is checked, your phone
number does not display on the recipient’s phone.
APN: Access point name used for the address of
the MMS server.
For further details, contact your service provider.
Delivery Report: When this option is checked, the
network informs you whether or not your message
has been delivered.
Read Reply: When this option is checked, your
phone sends a request for a reply along with your
message to the recipient
Auto Download: When this option is checked,
your phone automatically downloads the received
pictures or sounds.
MMS Profile
(Menu 2.6)
Profile Name: Name that you wish to assign to
the MMS server.
Connection URL: Address of your MMS server.
Security: Data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-Secure.
IP address: Gateway address required to connect
to the MMS server.
User Name: User ID required to connect to the
MMS server.
Password: Password required to connect to the
MMS server.
78
79
Call Records
Call Records
Dialled Calls
(Menu 3.3)
In this menu, you can view the:
• calls you missed, received or dialled.
• length of your calls.
• cost of your calls.
Note: You can access all of the numbers in the three
types of call records by pressing the
key in
Idle Mode.
Missed Calls
(Menu 3.1)
This menu option lets you view the last 20 numbers
of the calls you received, but did not answer.
The number and name, if available, display
together with the date and time when the call was
received.
By pressing the Options soft key, you can:
• delete the call from the list.
• edit the number, if available, and dial it or save it
in Phonebook.
Received Calls
(Menu 3.2)
This menu option lets you view the last 20 numbers
of the calls you received.
The number and name, if available, display
together with the date and time when the call was
received.
By pressing the Options soft key, you can:
• delete the call from the list.
• edit the number, if available, and dial it or save it
in Phonebook.
80
This menu option lets you view the last 20 numbers
you dialled.
The number and name, if available, diaplay
together with the date and time when the call was
made.
By pressing the Options soft key, you can:
• delete the call from the list.
• edit the number and dial it or save it in
Phonebook.
Delete All
(Menu 3.4)
You can delete all of the numbers stored in each call
record.
When a confirming message appears, press the
Yes soft key to confirm.
Call Time
(Menu 3.5)
This menu option lets you view the timers for calls
made and received.
The following timers are available:
Last Call Time: length of the last call.
Total Sent: total length of all calls made since the
timer was last reset.
Total Received: total length of all calls received
since the timer was last reset.
81
Call Records
Camera
Reset Timers: the option used to reset the call
timers. You must first enter the phone password
(see page 130) and then press the OK soft key.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and others.
Using the camera module built in your phone, you
can take pictures of people or events while on the
move. Additionally, you can send photos to other
people in a picture message or as an e-mail
attachment. The camera produces JPEG pictures.
Take and Send
Call Cost
(Menu 3.6)
This network feature lets you view the cost of calls.
This menu option may not be shown depending on
your SIM card.
The following options are available:
Last Call Cost: cost of the last call made.
Total Cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set in the Set Max Cost option,
you can no longer make any calls until you reset the
counter.
Max Cost: maximum cost set in the Set Max
Cost option. See below.
(Menu 4.1)
This menu allows you to take a picture to send the
photo as a picture message to other destinations.
Note: When you take a picture in direct sunlight or
under too bright illumination, shading may
occur on the picture.
Taking a Picture to Send a Message
1. Accessing this menu turns on the camera at the
top left of the phone.
You can see the image to be captured on the
display.
2. Adjust the picture by rotating the camera
module.
Reset Counters: option used to reset the cost
counter. You must first enter your PIN2 (see
page 132) and then press the OK soft key.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls.
Price/Unit: option used to set the cost of one
unit; this price per unit is applied when calculating
the cost of your calls.
82
83
Camera
Camera
Use the
and
of the picture.
Use the
picture.
and
keys to adjust the brightness
keys to adjust the size of the
The
and keys on the left side of the phone
allow you to flip the picture up and down.
3. Press the Take soft key to take a picture.
My Photos
(Menu 4.3)
This menu option allows you to review your
pictures.
When you access this menu, the latest picture
displays. Press the or key to scroll through the
pictures.
4. Press the Save soft key to save the picture.
Pressing the Multi soft key shows the pictures as
thumbnail images on one screen. In the thumbnail
view mode, use the navigation keys to scroll
through the pictures. To go back to the normal view
mode, press the View soft key.
5. Enter a name for your picture and press the OK
soft key.
Press the Options soft key to use the following
options:
If you want to have the delay time of 10
seconds, press the After 10s soft key.
For further details about entering characters,
see page 42.
6. Follow the procedures on page 75 to send the
picture as a picture message.
Send: allows you to send the picture as a picture
message. For further details, see page 75.
Wallpaper: allows you to set the picture as a
background image.
Delete: deletes the picture.
New Photo
(Menu 4.2)
In this menu option, you can take a picture and
save it.
Delete All: deletes all of the pictures saved in your
phone.
Rename: allows you to change the name of the
picture.
Accessing this menu turns on the camera at the top
left of the phone.
Follow steps 2 to 5 in “Taking a Picture to Send a
Message” on page 83.
84
85
Sound Settings
Sound Settings
Alert Type
You can use the Sound Settings feature to
customise various settings, such as the:
• ring melody, volume and type.
• sounds made when you press a key, receive a
message, open/close the folder or switch your
phone on/off.
• alert tone made every minute during a call, when
you make an error or when your call is connected
to the system.
Note: When the phone is in the silent mode (see
page 30), you cannot change the sound
settings.
Ring Tone
(Menu 5.3)
This menu option allows you to specify how you are
to be informed of incoming calls.
The following options are available:
Light only: the service light flashes; the phone
neither rings nor vibrates.
Melody: the phone rings using the ring melody
selected in the Ring Tone menu option
(Menu 5.1); see page 86.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
(Menu 5.1)
This menu option allows you to select a ring
melody.
You can choose between many different melodies.
Each time you select a melody, it plays for a few
seconds. If you have downloaded any sounds from
the Internet or EasyGPRS programme, you can use
them in this menu.
Ring Volume
Keypad Tone
(Menu 5.4)
This menu option allows you to select a tone that
the phone sounds when you press a key.
You can select an option from Cool, Piano, Tone
and Beep. To turn off the sound, select OFF.
(Menu 5.2)
This menu option allows you to adjust the ring
volume to one of five levels.
Use the
and
keys or the
and
keys on
the left side of the phone to increase or decrease
the volume.
86
87
Sound Settings
Sound Settings
Message Tone
(Menu 5.5)
Folder Tone
(Menu 5.6)
This menu option allows you to select how the
phone informs you that a new message has been
received.
This menu option allows you to select a tone that
the phone sounds when you open or close the
folder.
SMS Tone
You can choose either Future or Crystal.
To turn the sound off, select Off.
(Menu 5.5.1)
This option allows you to select how the phone
informs you that a new SMS message has been
received.
The following options are available:
OFF: the phone does not use the SMS tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS Tone x: the phone uses one of several SMS
tones.
SMS-CB Tone
(Menu 5.5.2)
This option allows you to select how the phone
informs you that a new cell broadcast (CB) message
has been received.
Power On/Off
This menu option allows you to select a melody that
the phone sounds when it is switched on and off.
You can choose either Classical or Cheerful. To
turn the sound off, select Off.
Extra Tones
Light Only: the service light flashes.
(Menu 5.8)
You can customise additional tones for the phone.
To turn a given
tone
Press the
on
ON soft key.
A check mark displays in
front of the option.
off
OFF soft key again.
The check mark no longer
displays.
The following options are available:
OFF: the phone does not use the CB tone.
(Menu 5.7)
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS-CB Tone x: the phone uses one of several
CB tones.
88
89
Sound Settings
Phone Settings
The following options are available:
Error Tone: sets whether or not the phone
informs you when you make a mistake.
Minute Minder: sets whether or not the phone
beeps every minute during an outgoing call to keep
you informed of the length of your call.
Connect Tone: sets your phone to beep when
your call is connected to the system.
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed in the Phone Settings
menu.
Infrared Activate
(Menu 6.1)
This feature allows you to send or receive data
through the infrared port. To use an infrared
connection, you must:
• configure and activate an IrDA-compliant infrared
port on your PC.
• activate the infrared feature on the phone; the
IrDA icon ( ) appears on the top line of the
display.
• align the IrDA port on the phone with the IrDA
port on your computer.
15
IrDA port
IrDA port
The connection is ready for data transmission.
If there is no communication between your phone
and the IrDA-compliant device within 30 seconds of
activating the feature, it is automatically
deactivated.
Note: For the best performance, use the data link
cable supplied in your SGH-V200 kit.
90
91
Phone Settings
Phone Settings
My Settings
Greeting Message
(Menu 6.2)
You can change the background image and the
display style of Menu Mode according to your
preference.
Wallpaper
(Menu 6.2.1)
This menu option allows you to change the
background image to be displayed in Idle Mode.
To change the background image:
1. Scroll through the list by pressing the
key.
or
You have various preset images available. When
you set a photo as your wallpaper in the My
Photos menu option (Menu 4.3), you can see
it by the name of My Photo.icn.
2. Press the Select soft key when the image you
want highlights.
3. When the image displays, press the Select soft
key.
The display asks you if you want to display text
on the screen
4. Press the Yes soft key to display the current
date and time on the wallpaper image.
To display only the image, press the No soft
key.
Menu Style
(Menu 6.3)
This menu option allows you to set a greeting
message to be displayed briefly when the phone is
switched on.
To
Press the
clear the existing
message
key and hold it down until
the message is cleared.
enter a new
message
appropriate alphanumeric
keys.
change the text
input mode
soft key.
For further details about how to enter characters,
see page 42.
Own Number
(Menu 6.4)
This feature allows you to:
• assign a name to each of your own phone
numbers registered on your SIM card.
• edit the names and numbers.
This function is a memory aid, which you can use to
check your own phone numbers if you need to do so.
Any changes made here do not in any way affect
the actual subscriber numbers on your SIM card.
(Menu 6.2.2)
This menu option allows you to select the menu
display style. You can choose either Film Style or
Page Style.
92
93
Phone Settings
Language
Phone Settings
(Menu 6.5)
You can select a display language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
Change PIN
(Menu 6.6.2)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Security
(Menu 6.6)
The Security feature enables you to restrict the use
of your phone to the people and the types of calls of
your choice.
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections. See also pages 130-132.
PIN Check
(Menu 6.6.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
To change your PIN, see the Change PIN menu
option (Menu 6.6.2).
Phone Lock
(Menu 6.6.3)
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change Password menu option (Menu 6.6.4)
below.
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
The following options are available:
Change Password
Disable: the phone connects directly to the
network when you switch it on.
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
Enable: you must enter the PIN each time the
phone is switched on.
(Menu 6.6.4)
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
94
95
Phone Settings
SIM Lock
Phone Settings
(Menu 6.6.5)
Display Settings
(Menu 6.7)
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code.
Brightness
Once you have entered the lock code, you are
asked to confirm it by entering it again.
This menu option allows you to adjust the contrast
of the display screens to see them better in
different lighting conditions.
To unlock the SIM, you must enter the SIM lock
code.
To adjust the display contrast:
FDN Mode
(Menu 6.6.6)
(Menu 6.7.1)
1. Select a display, Main LCD or Front LCD, and
press the Select soft key.
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
2. Adjust the brightness by using the
and
keys or the
and
keys on the left side of the
phone.
The following options are available:
3. When you are satisfied, press the OK soft key to
save the selection.
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
Back Light
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
To change your PIN2, see the Change PIN2 menu
option (Menu 6.6.7) below.
Change PIN2
(Menu 6.6.7)
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
(Menu 6.7.2)
Select the length of time for which the backlight is
on. The backlight comes on when you press a key
or receive a call or message and turns off after the
specified length of time. The display turns off after
one minute to conserve your battery power.
Auto Light
(Menu 6.7.3)
Using this feature, you can specify the time for
which the backlight is to be used. This feature helps
you to conserve your battery power.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option does not display.
96
97
Phone Settings
Phone Settings
The following options are available:
Extra Settings
Disable: the backlight is used according to the
setting in the Back Light menu option
(Menu 6.7.2); see page 97.
You can turn the automatic redialling or answering
features on or off.
(Menu 6.8)
Enable: the backlight is used only during the
specified period of time. Set the time when the
phone turns the light on and turns it off, using the
appropriate number keys.
To turn a feature
Press the
on
ON soft key.
A check mark displays in
front of the option.
Service Light
off
OFF soft key.
The check mark no longer
displays.
This menu option allows you to select whether or
not the service light is used or in which colour it
flashes.
Select one from the seven colour settings available.
When the phone is ready for use, the service light
flashes in the appropriate colour.
The following options are available:
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
If you do not want to use the service light,
select Off.
Note: The interval between two call attempts varies.
Graphic Logo
Active Folder: when this option is checked, you
can simply open the folder to answer a call.
This menu option allows you to display your
operator’s logo instead of its name.
Off: the operator name displays in Idle Mode.
On: the operator logo stored in your phone displays
in Idle Mode; if no logo has been stored, the
operator name displays.
When it is unchecked, you must open the folder and
press a key, depending on the setting of the
Anykey Answer option. See below.
Anykey Answer: when this option is checked,
you can answer an incoming call by pressing any
key, except the
key and the Reject soft key.
To reject the call, press the
key or the Reject
soft key.
When this option is unchecked, you can only press
the
key or Accept soft key.
98
99
Phone Settings
Short Cut
(Menu 6.9)
The navigation keys can be used as shortcut keys.
In Idle Mode, they allow you to access specific
menu options directly.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by
pressing the
or
key, and press the Select
soft key.
• Key up (
)
• Key down (
)
• Key right ( )
• Key left ( )
2. Select the menu option to be assigned to the
key by pressing the
or
key.
Note: To deactivate a shortcut key, select the
None option.
3. Press the Select soft key to save the selection.
Reset Settings
(Menu 6.10)
You can easily reset your phone to its default
settings. To reset your phone:
1. Select the Reset Settings menu option.
2. Enter the 8-digit phone password and press the
OK soft key.
Note: The password is preset to “00000000.” To
change this password, see page 95.
100
Organiser
The Organiser feature enables you to:
•
•
•
•
view the calendar and organise your schedule.
define a list of things to do.
set the current date and time.
set the alarm so that the phone rings at a specific
time, such as to remind you of an appointment.
• use the phone as a calculator for basic
mathematical equations or currency exchange
operations.
Calendar
(Menu 7.1)
With the Calendar feature, you can:
• consult the calendar.
• write memos to keep track of your schedule.
• trigger an alarm, if necessary.
Consulting the Calendar
When you select the Calendar menu option
(Menu 7.1), the calendar displays. The following
options are available when you press the Options
soft key:
Search all: displays all of the memos, starting
with the oldest, regardless of the day. To scroll
through the memos, press the
or
key.
Delete all: allows you to delete all of the memos.
You are asked to confirm your action.
Go to date: allows you to jump to a specific date.
Exit: exits the Calendar feature and returns to Idle
Mode.
101
Organiser
Writing a Memo
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the
navigation keys.
Note: To skip to the previous or next month, press
the
and
keys on the left side of the
phone.
2. Press the Select soft key.
An empty memo screen displays allowing you to
enter your memo.
3. Enter your memo and then press the OK soft
key.
Note: For further details about how to enter
characters, see page 42.
You are asked if you wish to set an alarm.
4. If you want an alarm to ring on the chosen day,
press the Yes soft key.
Otherwise, press the No soft key.
5. If you pressed the Yes soft key, set the time for
the alarm and press the OK soft key.
The colour of the date on the calendar changes to
green to indicate that a memo exists.
Organiser
Once you have finished editing the memo, press the
OK soft key. The following options are then
available when you press the Options soft key:
Alarm: allows you to set an alarm to ring at the
specified time to inform yoou of the memo. If you
already set, you can change or delete the alarm.
Erase: allows you to delete the memo.
Copy to: allows you to copy the memo to another
date.
Move to: allows you to change the date of the
memo.
To Do List
(Menu 7.2)
This feature allows you to:
• enter a list of tasks to be done.
• assign a priority and deadline to each task.
• sort the tasks by priority and status mark.
Creating the To Do List
1. Press the New soft key.
2. Enter the first task.
Note: For further details about how to enter
characters, see page 42.
Editing a Memo
3. Press the OK soft key.
When you select a day for which a memo already
exists, you can press the Edit soft key to edit the
memo displayed.
4. Select high, normal or low priority using the
and
keys and press the Select soft key.
Note: For further details about how to enter
characters, refer to page 42.
102
5. Enter your deadline and press the OK soft key.
If you do not want to set a deadline, press the
Skip soft key.
103
Organiser
Organiser
Editing the To Do List
If tasks are already defined on the To Do List when
you select the To Do List menu option
(Menu 7.2), the current contents display with the
status mark and priority;
for High,
for
Normal and
for Low.
The following options are available:
To view the details
for a specific task
➀ highlight the task.
➁ press the View soft key.
➂ scroll through the tasks
using the
and
keys,
if necessary.
To change the
status
of a specific task
➀ highlight the task.
➁ press the
key to mark
the task as completed as of
the current date and time.
or
➀ highlight the task.
➁ press the Options soft
key.
➂ select the Mark option.
➃ select the appropriate
status (Done or Undo).
To sort the existing
tasks by priority or
status
➀ press the Options soft
key.
➁ select the Sort option.
➂ select the sort criterion
(High, Low, Done or
Undo).
To copy a task
➀ highlight the task.
➁ press the Options soft
key.
➂ select the Copy option.
➃ change the text, priority
and/or deadline for the
task, as required.
To copy a task to
the calendar
➀ highlight the task.
➁ press the Options soft
key.
➂ select the Copy to
calendar option.
➃ change the text and
deadline for the task and
set the alarm, as required.
To delete a task
➀ highlight the task.
➁ press the Options soft
key.
➂ select the Delete option.
To create a new
task
➀ press the Options soft
key.
➁ select the New option.
➂ enter the text, priority and
deadline for the task.
To delete all tasks
To edit an existing
task
➀ highlight the task.
➁ press the Options soft
key.
➂ select the Edit option.
➃ change the text, priority
and for deadline for the
task, as required.
➀ press the Options soft
key.
➁ select the Delete all
option.
➂ confirm the deletion by
pressing the OK soft key.
To exit the To Do
list
➀ press the Options soft
key.
➁ select the Exit option.
104
105
Organiser
Time & Date
Organiser
(Menu 7.3)
This menu option allows you to change the current
time and date displayed. You can also use this
option to find out what time it is in another part of
the world.
The following options are available:
Set Time: allows you to enter the current time.
You can choose the time format in the Time
Format menu option (Menu 7.3.4); see below.
Alarm
(Menu 7.4)
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring
the alarm even if the phone is switched off
(Autopower menu option set to Enable).
The following options are available:
Once Alarm: the alarm rings only once and is
then deactivated.
Note: Before setting the time, you must specify your
time zone, in the World Time menu option
(Menu 7.3.3).
Daily Alarm: the alarm rings every day at the
same time.
Set Date: allows you to enter the day, month and
year.
Morning Call: the alarm rings to wake you up in
the morning.
World Time: allows you to find out what time it is
in another part of the world, using the and
keys.
To set the alarm:
The screen shows the:
1. Choose the type of alarm to be set and press the
Select soft key.
2. Enter the time for the alarm to sound.
• city name.
• current date and time.
• time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default).
To select your time zone:
1. Select the city corresponding to your time zone
by pressing the or key one or more times.
The local date and time display.
2. Press the Set soft key.
Time Format: allows you to change the time
format to 24 Hours or 12 Hours.
106
If you want to use the alarm options, press the
Options soft key. The following options are
available:
• Remove Alarm: deactivates the current
alarm.
• Alarm Sound Set: allows you to select the
alarm melody.
3. Press the OK soft key.
4. If you select Morning Call in Step 1, select the
repeat option, Monday to friday or Monday
to Saturday and press the Select soft key.
107
Organiser
Organiser
To stop the alarm when it rings, open the folder and
press the Exit soft key.
Currency Exchange
Remove Alarm: deactivates all alarm settings.
Using this menu option, you can make currency
conversions.
Autopower: if this option is set to Enable, the
alarm will ring at the specified time, even when the
phone is switched off.
1. Enter the current exchange rate of your source
currency and press the OK soft key.
If the menu option is set to Disable and the phone
is switched off at the specified time, the alarm will
not ring.
Calculator
(Menu 7.6)
You can insert a decimal point by pressing
the
key.
2. Enter the amount to convert and press the OK
soft key.
The amount you entered and its equivalent
value display.
(Menu 7.5)
With this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions; addition, subtraction,
multiplication and division.
3. Press the Exit soft key to exit the currency
convertor.
1. Enter the first number using the numeric keys.
Notes:
• To delete mistakes or clear the display, press the
key.
• To include a decimal point or a bracket, press the
left soft key until the symbol you want displays.
2. Press the right soft key until the required
arithmetic symbol appears; + (addition), (subtraction), x (multiplication), / (division).
3. Enter the second number.
4. Repeat Steps 1 to 3 as many times as required.
5. To calculate the result, press the
108
key.
109
Network Services
Network Services
To set your call diverting options:
These menu functions are network services. Please
contact your service provider to check their
availability and subscribe to them, if you wish.
Call Diverting
(Menu 8.1)
1. Select the type of call diverting by pressing the
or
key, and then press the Select soft
key.
2. Select the type of calls to be diverted by
pressing the
or
key, and then press the
Select soft key.
This network service enables incoming calls to be
rerouted to the number that you specify.
The current status displays. If the option has
already been set, the number to which the calls
are diverted displays.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
Call diverting can be set up in the following ways:
Divert Always: all calls are diverted.
Busy: calls are diverted when you are already on
another call.
No Reply: calls are diverted when you do not
answer the phone.
Unreachable: calls are diverted when you are not
in an area covered by your service provider.
Cancel All: all call diverting options are cancelled.
You can specify individual diverting options for each
of the following call types:
• Voice calls only
• Data calls only
3.
To
Press the
activate call
diverting
Activate soft key.
Go to Step 4.
change the
call number
Change soft key.
Go to Step 4.
deactivate call
diverting
Remove soft key.
4. Enter the number to which the calls are to be
diverted and press the OK soft key.
To enter an international code, press the
key until the + sign displays.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can deactivate all call diverting settings by
selecting the Cancel All option.
110
111
Network Services
Call Barring
Network Services
(Menu 8.2)
The call barring network service allows you to
restrict your calls.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
Call barring can be set up in the following ways:
To deactivate specific call barring settings:
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International Except to Home: when abroad,
calls can be made only to numbers within the
current country and to your home country, which is
the country where your home network provider is
located.
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option
applies.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be
received when you are using your phone outside of
your home service area.
Cancel All: all call barring settings are
deactivated; calls can be made and received
normally.
You can specify individual barring options for each of
the following call types:
• Voice calls only
• Data calls only
The phone sends your settings to the network
and the network’s acknowledgement displays
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can specify a
new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
To set your call barring options:
1. Select the type of call barring by pressing the
or
key, and then press the Select soft key.
2. Select the type of calls to be barred by pressing
the
or
key, and then press the Select
soft key.
3. Press the Activate soft key to confirm your
settings.
112
113
Network Services
Call Waiting
Network Services
(Menu 8.3)
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for
each of the following call types:
• Voice calls only
• Data calls only
Network Selection
(Menu 8.4)
The Network Selection feature enables you to
automatically or manually select the network used
when roaming outside of your home area.
Note: You can select a network other than your home
network only if there is a valid roaming agreement between them.
To set your call waiting options:
To indicate to automatically or manually select the
network when roaming:
1. Select the type of calls to which the call waiting
option is to be applied by pressing the
or
key, and then press the Select soft key.
1. When Network Selection displays, press the
Select soft key.
The screen informs you whether call waiting is
activated or deactivated.
2. You can activate or deactivate the call waiting
feature as necessary by using the Activate or
Deactivate soft key respectively.
To return to the previous screen, press the Exit
soft key.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
2. Press the
or
key until the appropriate
option highlights and then press the OK soft
key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press the
or
key until the preferred
network highlights and then press the OK soft
key.
You are connected to that network.
114
115
Network Services
Caller ID
Network Services
(Menu 8.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow the user to change
this setting.
The following options are available:
Default: the default setting provided by the
network is used.
Hide Number: your number does not display on
the other person’s phone.
Send Number: your number is sent each time you
make a call.
Closed User Group (CUG)
(Menu 8.6)
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index as advised by your service
provider or delete a group.
To
scroll through the
existing CUG
indexes
Press the
or
key.
add a new CUG
index
Options soft key, select the
Add option and enter the
index.
delete a CUG
index
Options soft key and select
the Delete option.
activate a CUG
index
Options soft key and select
the Activate option.
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to ten user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
Outside Access: lets you enable or disable calls
to numbers other than those in the Closed User
Group. This feature depends on the nature of your
CUG subscription. Please check with your service
provider.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
Default Group: you may set a default CUG with
your service provider. If you have done so, you can
enable the Default Group option on your phone.
When making a call, you are given the option of
using your default CUG, instead of selecting one
from the list.
Activating a Closed User Group
If you select the Closed User Group menu, you
can enter the CUG function. You can now access the
following options after pressing the Select soft key.
116
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
117
Network Services
Funbox
Band Selection
(Menu 8.7)
The Funbox menu contains several fun options.
For the phone to make and receive phone calls, it
must register with one of the available networks.
Your phone can handle either of the following types
of networks:
• GSM 900
Games
(Menu 9.1)
You can enjoy games with your phone.
• GSM 1800
Scroll to game, using the
the Select soft key.
• Combined GSM 900/1800
For each game, the following options are available:
• GSM 1900
New Game: allows you to start a game.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
High Score: shows you the High Score table.
1. When Band Selection displays, press the
Select soft key.
Continue: allows you to continue the last game
you played.
2. Press the
or
key until the appropriate
option, GSM 900/1800 or GSM 1900,
highlights and press the OK soft key.
While you are playing a game:
When you select a new band, your phone displays a
confirmation message and then automatically
searches for all of the available networks. Your
phone registers with a preferred network within the
selected band.
118
and
keys and press
Key Info: shows you which keys do what within
the game.
To
pause or resume the
game
exit the game
Press the
key.
key.
At the end of the game, if your score is ranked fifth
or higher, you may enter a name of up to 10
characters.
119
Funbox
Funbox
WAP Browser
(Menu 9.2)
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access
and navigate the Wireless Web via your phone.
Home
To
Press the
return to the
previous page
Back soft key or the
key.
return to the
startup homepage
key and select the
Home option. For further
details about this option, see
page 121.
(Menu 9.2.1)
Selecting this option connects the phone to the
network and loads the homepage of the Wireless
Web service provider.
The content of the WAP Browser startup homepage
depends on your Wireless Web service provider. To
scroll through the screen, use the
and
keys.
Note: To access the startup homepage from any other
screen in the WAP browser, use the Home
option. For further details about the WAP
Browser menus, see page 121.
Entering Text in the WAP Browser
When you are prompted to enter text, the current
text entry mode is indicated on the screen.
To change
modes
press the
times.
To enter a
space
press the
To edit text
➀ set the cursor to the right of
the character(s) to be
corrected.
➁ press the
key as required.
➂ enter the correct character(s).
Exiting the WAP Browser
To exit the browser at any time, simply press the
key.
Navigating the WAP Browser
To
Press the
scroll through and
select browser
items
or
key until the symbol
points to the required
item, and then press the OK
soft key to confirm the
selection.
select a numbered
item
corresponding numeric key.
120
key one or more
key.
For further details about the text entry modes, see
page 42.
Selecting and Using Browser Menu Options
Various menu options are available when you are
using the WAP Browser to navigate the Wireless
Web.
To access a menu option:
1. Press the
key. A menu displays.
121
Funbox
Funbox
2. Highlight a menu option by pressing the
keys.
and
3. Select an option by pressing the left soft key.
Edit Home: allows you to change the startup
homepage manually. Enter the required URL and
press the OK soft key. For further details about
entering text, see page 42.
4. If necessary, select the secondary option using
the
and
keys, and press the left soft key
to confirm.
Inbox: allows you to read messages received from
the web server.
Note: The menus may vary, depending on your
version of the WAP Browser.
Favorite
The following menu options are available:
Reload: reloads the current page.
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
Goto URL: allows you to manually enter the URL
address of the required Web page. After entering an
address, press the OK soft key to go there directly.
Show URL: displays the URL address of the site to
which you are currently connected. It also enables
you to set the current site as the startup
homepage.
To
Press the
set the current
page as your
startup homepage
Option soft key, select the
Save to Home option and
press the Select soft key.
set a bookmark for
the current page
Option soft key, select the
Save to Bookmark option
and press the Select soft
key.
cancel your setting
Back soft key.
122
(Menu 9.2.2)
This option allows you to store the URL addresses of
your favourite web sites. You can access this menu
directly by pressing and holding the
key while
using the WAP Browser.
To store a URL address:
1. Select an empty location and press the Options
soft key.
2. Enter the address and press the Enter soft key.
Note: For further details about how to enter
characters, see page 42.
3. Enter a name for the favourite item and press
the Enter soft key.
After saving favourite items, you can use the
following options by pressing the Options soft key:
Goto URL: quickly accesses you to the site.
Edit: allows you to edit the address.
Erase: deletes the address.
123
Funbox
http://
Funbox
(Menu 9.2.3)
This options allows you to manually enter the URL
address of the Web site that you wish to access. You
can access this menu directly by pressing and
holding the
key in the WAP browser.
For further details about entering characters, see
page 42.
Settings
(Menu 9.2.4)
This option allows you to set up five proxy servers
for the WAP browser. Contact your service provider
for details about setting options.
For each server, the following options are available:
Profile Name: enter a name that you wish to
assign to the HTTP proxy server.
Homepage URL: set the address of your startup
homepage. When the default homepage displays,
you can delete it using the
key and enter your
own choice.
Security: select a data transmission mode. Choose
Secure to protect your data against unauthorised
access; otherwise, choose Non-Secure.
APN: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to Data:
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone
number.
Data Call Type: select a data call type; Analogue
or ISDN.
Note: The WAP browser settings may vary, depending
on the service provider. Contact your service
provider for further details.
Clear Cache (Menu 9.2.5)
You can clear the information stored in the cache,
the phone’s temporary memory which stores the
most recently accessed Web pages.
Press the Yes soft key to confirm the deletion.
Otherwise, press the No soft key.
Push Message (Menu 9.2.6)
IP Address: enter the WAP gateway address
required to connect to the Internet.
In this menu, you can receive and access web
messages from the server.
Bearer: select a bearer to be used for each type of
network address accessed; GPRS or Data.
The following options are available:
When the bearer is set to GPRS:
Inbox: allows you to read the messages received
from the web server.
User Name: enter the User ID required to connect
to the GPRS network.
Receive: allows you to set whether or not your
phone receives web messages.
Password: enter the password required to connect
to the GPRS network.
Delete All: allows you to delete all of the web
messages.
124
125
Funbox
Solving Problems
Downloads
(Menu 9.3)
Sounds (Menu 9.3.1)
In this menu, you can view the list of sounds
downloaded from the server. You can set the
downloaded sounds as the current ring tone, but
cannot send the sounds to other phones.
When the memory is full, a warning message
displays and the phone rejects additional sounds
until you delete the obsolete ones.
Pictures (Menu 9.3.2)
In this menu, you can view the list of pictures
downloaded from the server. You can set the
downloaded pictures as the current background
image, but cannot send them to other phones.
When the memory is full, a warning message
displays and the phone rejects additional pictures
until you delete the obsolete ones.
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
When you switch your phone on, the
following messages may appear
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN Check menu
option (Menu 6.6.1).
Enter PUK
• The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your network operator.
126
127
Solving Problems
Solving Problems
“No service,” “Network failure” or “Not
done” displays
• The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialled
• Have you pressed the
The phone starts beeping and
“**Warning** Low Battery” flashes on
the display
• The battery is insufficiently charged. Replace the
battery and recharge it.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (the
for more than one second)?
key pressed
No number is dialled when you recall a
Phonebook entry
• Check that the number has been stored correctly,
by using the Phonebook Search feature.
• Re-store the number, if necessary.
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you
speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
128
If the above guidelines do not help you to solve
the problem, take a note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung aftersales service.
129
Access Codes
Access Codes
PIN
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorized use.
When requested for any of the codes explained
below, key in the appropriate code (displayed as
asterisks) and press the OK soft key. If you make a
mistake, press the
key until the incorrect digit
is cleared and then continue entering the correct
code.
The access codes, except for the PUK and PUK2
codes can be changed using the Security menu
options (Menu 6.6). See page 94 for further
details.
Important! Avoid using access codes resembling
emergency numbers, such as 112, so
that you do not dial an emergency
number accidentally.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be used
until you re-enable it by entering the PUK (see
below).
To
See
activate/deactivate the
PIN Check feature
page 94
(Menu 6.6.1).
change the PIN
page 95
(Menu 6.6.2).
PUK
The 8-digit PUK (PIN Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it,
contact your service provider.
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorised use. The
phone password is supplied with the phone and is
preset to “00000000” at the factory.
To
See
activate/deactivate the
Phone Lock feature
page 95
(Menu 6.6.3).
change the phone
password
page 95
(Menu 6.6.4).
130
The Personal Identification Number or PIN (4 to
8 digits) protects your SIM card against unauthorised
use. It is usually supplied with the SIM card.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the
OK soft key.
3. When the Confirm New PIN message
displays, enter the same code again and press
the OK soft key.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact
your service provider for a new card.
131
Access Codes
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To change the PIN2, see page 96 (Menu 6.6.7).
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
Health and Safety
Information
Exposure to Radio-Frequency
Energy (SAR Information)
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the
OK soft key.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
the EU Council is 2.0W/kg.*
3. When the Confirm PIN2 message displays,
enter the same code again and press the OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
132
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten gram of body
tissue. The limit incorporates a substantial margin of safety
to give additional protection for the public and to account for
any variations in measurements. The SAR values may vary
depending on national reporting requirements and the
network band.
133
Health and Safety Information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
The highest SAR value for this model phone when
tested for compliance against the standard was
0.685 W/kg. While there may be differences
between the SAR levels of various phones and
various positions, they all meet the EU
requirements for RF exposure.
Health and Safety Information
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
134
135
Health and Safety Information
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental shortcircuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
Health and Safety Information
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you are
following the special regulations in a given area or
country.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
136
137
Health and Safety Information
Health and Safety Information
Operating Environment
Electronic Devices
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to
minimise potential interference.
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
138
139
Health and Safety Information
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch off your phone
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
140
Health and Safety Information
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
141
Health and Safety Information
Health and Safety Information
Emergency Calls
Other Important Safety Information
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
142
143
Health and Safety Information
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
Health and Safety Information
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
144
145
Glossary
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features on your mobile phone,
here are a few definitions.
Active Folder
Ability to answer a call simply by opening the
phone.
Call Forwarding
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming
call when engaged on another call.
Caller Line Identification Services
(Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
GSM (Global System for Mobile
Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
MMS (Multimedia Message Service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can also be sent by
e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and later also video clips and presentation
information.
Multi-party Calling
Ability to establish a conference call involving up to
five additional parties.
Phone Password
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS guaranties continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
146
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
147
Glossary
Glossary
PIN (Personal Identification Number)
SMS (Short Message Service)
Security code that protects the phone/SIM against
unauthorized use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when traveling for example).
Soft Keys
Two keys marked
purpose of which:
and
on the phone, the
• varies according to the function that you are
currently using.
• is indicated on the bottom line of the display just
above the corresponding key.
Tri Band
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
148
Ability to handle any of the following types of
network; GSM 900, GSM 1800, combined GSM 900/
1800 and GSM 1900 MHz bands, for greater call
success and wider roaming.
Your phone automatically searches for the last
network used. If, for any reason, this network is
unavailable, your phone will attempt to register
with a different network.
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
149
Index
Index
A
Access codes • 130
Accessories • 9
Active folder • 99
Alarm, set (7.4) • 107
Alert type (5.3) • 87
Answering
a call • 27
a second call • 52
Anykey answer • 99
Auto light • 97
Auto power, alarm • 108
Auto redial• 99
B
Background image • 92
Backlight • 15, 97
Band selection • 118
Barring
password • 113
Battery
charging • 19
low battery indicator •
22
Broadcast (1.9) • 70
C
Calculator (7.5) • 108
Calendar (7.1) • 101
Caller ID (8.5) 116
Calls
answering
a call • 27
a second call • 52
cost (3.6) • 82
dialled (3.3) • 81
diverting (8.1) • 110
emergency • 142
ending • 25
holding • 48
international • 24
making • 24
missed • 28, 80
multi-party • 52
150
received (3.2) • 80
records (3) • 80
redialling automatically
99
time (3.5) • 81
via phonebook • 37
waiting 114
waiting (8.3) • 52
Camera (4) • 83
Card
installing the SIM • 17
Care • 144
Changing
barring password • 113
password (6.6.4) • 95
PIN (6.6.2) • 95
PIN2 (6.6.7) • 96
Characters
changing mode • 43
entering • 42
Charging battery • 19
Closed User Group (8.6) •
116
Conference call • 52
Connect tone • 90
Contrast (6.7.1) • 97
Copying
memos • 103
phonebook number • 36
task • 105
Correcting numbers • 24
Cost of calls (3.6) • 82
CUG • 116
Currency Exchange (7.6) •
109
icons • 14
layout • 13
setting language • 94
Diverting calls (8.1) • 110
Downloads (9.3) • 126
E
Earpiece volume • 26
Editing
memos • 102
missed calls • 29, 80
phonebook number • 36
tasks • 104
to do list • 104
Emergency calls • 142
Error tone • 90
F
FDN mode (6.6.6) • 96
Fixed Dial Number mode • 96
Funbox (9) • 119
Functions, select • 31
G
Games (9.1) • 119
Greeting message (6.3) • 93
Groups
user • 116
H
Holding calls • 48
I
D
Date setting (7.3.2) • 106
Deleting
memos • 103
messages • 62, 63
missed calls • 29, 80
phonebook number • 36
tasks • 105
Display
contrast • 97
Icons, description • 14
Identifying a caller • 27
Incoming calls (3.2) • 80
Incoming messages
picture (2.1) • 72
text (1.1) • 61
Infrared activate (6.1) • 91
IrDA port • 91
K
Key tones
adjusting volume • 26
muting • 50
selecting (5.4) • 87
sending • 50
Keys
description • 11
location • 10
shortcut • 100
L
Language (6.5) • 94
Last number, redial • 25
Length of calls • 81, 90
Letters
changing mode • 43
entering • 42
Light
backlight • 15, 97
service • 16, 98
Locking phone (6.6.3) • 95
Low battery indicator • 22
Lower-case characters
entering • 45
M
Maintenance • 144
Memory status
message (1.7) • 69
phonebook • 41
Memos
copying • 103
deleting • 103
editing • 102
writing • 102
Menus
accessing by scroll • 55
accessing by shortcuts •
56
list • 56
Message tone (5.5) • 88
Microphone, mute • 49
Minute minder • 90
Missed calls • 28, 80
151
Index
Morning Call • 107
Multimedia message, view •
72
Multiparty calls
dropping • 54
making • 52
private conversation •
53
Muting
key tones • 50
microphone • 49
My objects (1.6) • 68
N
Names
entering • 42
searching/dialling • 37
storing • 33
Network selection (8.4) •
115
Network services (8) • 110
Numbers
copying phonebook • 36
correcting • 24
erasing • 36
fixed dial • 96
own • 93
pasting phonebook • 36
searching/dialling • 37
storing • 33
O
Options, select • 31
Organiser (7) • 101
Outgoing calls (3.3) • 81
Outgoing messages
picture (2.2) • 74
text (1.2) • 62
Own number (6.4) • 93
P
Password
barring
changing • 113
Password, phone
152
Index
changing • 95
code • 130
Phone
lock (6.6.3) • 95
password • 130
settings (6) • 91
Phonebook
copying • 36
editing • 36
erasing • 36
options • 35
pasting • 36
searching/dialling • 37
speed-dialling • 40
storing numbers/names
• 33
Photos, take • 83
Picture message
inbox (2.1) • 72
outbox (2.2) • 74
setup (2.5) • 77
write new (2.3) • 75
PIN
changing • 95
checking • 94
code • 131
PIN2
changing • 96
code • 132
Problem solving • 127
PUK • 131
PUK2 • 132
R
Read messages
multimedia (2.1) • 72
text (1.1) • 61
Redialling
automatically • 99
last number • 25
Reset setting (6.10) • 100
Ring
tone (5.1) • 86
type (5.3) • 87
volume (5.2) • 86
Roaming • 115
S
Safety
information • 133
precautions • 7
Schedule • 101
Searching in phonebook • 37
Security (6.6) • 94
Selecting functions/options •
31
Sending
key tones • 50
messages • 64
Service light • 16, 98
Setting
alarm (7.4) • 107
date (7.3.2) • 106
language (6.5) • 94
time (7.3.1) • 106
Shortcut (6.9) • 100
SIM card
installing • 17
locking 96
SIM Lock (6.6.5) • 96
SMS
message icon• 61
setup • 67
using • 51, 61
Soft keys • 31
Solving problems • 127
Sound settings (5) • 86
Speed-dialling • 40
Switching on/off
microphone • 49
phone • 23
Text messages
broadcast (1.9) • 70
inbox (1.1) • 61
outbox (1.2) • 62
setting (1.5) • 67
templates (1.4) • 66
write new (1.3) • 64
Time
call • 81
format (7.3.4) • 106
setting (7.3.1) • 106
world (7.3.3) • 106
To do list (7.2) • 103
Tone
connect • 90
error • 90
keypad • 87
message • 88
ring • 86
Travel adapter • 19
U
Unpacking • 9
Upper-case characters
entering • 45
User group • 116
V
Vibration • 87
Voice mail (1.8) • 69
Voice server • 70
Volume
adjusting • 26
selecting the ring • 86
T
T9 mode • 44
Tasks
defining • 103
editing • 104
Templates (1.4) • 66
Text
changing mode • 43
entering • 42
W
Waiting call • 52, 114
World time (7.3.3) • 106
Writing memos • 102
Writing messages
picture (2.3) • 75
text (1.3) • 64
153
154
155
➄ Press the Select soft key.
➃ Scroll with the
and
keys through the list
of the options until the
required one is selected.
➂ Press the Select soft key.
➁ Scroll with the
and
keys through the list
of the menus until you
reach the required menu.
➀ Press the Menu soft key.
Each of the two soft keys (
and
)
perform the function indicated by the text
above it, on the bottom line of the
display.
Access the
Menu
Functions
key.
Briefly press the
➀ Open the phone and
press the View soft
key.
➁ Scroll with the
and
keys through the
missed calls.
➂ To return the call, press
the
key.
View Missed
Calls
Immediately
After Missing
Them
➀ Enter the number.
➁ Press the
key.
Make a Call
End a Call
Press and hold the
key.
Switch On/Off
Quick Reference Card
Tri Band SGH-V200 GPRS Telephone
Adjust the
Volume
Answer a
Call
➀ Select the Alert Type
menu option (5.3).
Press the
or
key on the
left side of the phone.
Open the phone
or
Press the
key.
➀
➁
➂
➃
Enter the
Press the
Select an
Press the
number.
Save soft key.
icon for label.
Select soft key.
➂ Press the Select soft key.
➁ Select an option:
• Light only
• Melody
• Vibration
• Vibra+Melody
Choose the
Alert Type
Store
Numbers in
Phonebook
Store
Numbers in
Phonebook
(continued)
Search for a
Number in
Phonebook
➄ Enter the name.
➅ Press the OK soft key.
➆ If necessary, change the
location.
➇ Press the OK soft key.
➈ Press
to return to
Idle Mode.
➀ Press the Name soft
key.
➁ Select the Search
option.
➂ Enter the first few letters
of the name.
➃ To scroll through the
names, press the
or
key.
➄ Press the View soft key.
➅ To scroll through the
numbers, press the
or
key.
➆ Press the
key to dial.
156
Download PDF

advertising