Samsung | FG87KST | Samsung FG87KST User Manual

IINSTALLATION_FG87KST_EN.pdf 2010-08-05 오후 7:33:23
FG87KST / FG87K
FW87KST / FW87K
Installation instructions
microwave oven
general
technical information
Electrical supply:
Power consumption:
Dimensions(w×h×d):
230 V
AC, 50 Hz
2400 W (FG87KST/FG87K)
1250 W (FW87KST/FW87K)
595×380×360 mm (FG87KST/FG87K)
595×380×350 mm (FW87KST/FW87K)
50
This appliance complies with the EU regulations.
disposal of packaging and appliance
The appliance's packaging is recyclable.
The following can be used:
- cardboard;
- polyethylene film (PE);
- CFC-free polystyrene(PS rigid foam).
Dispose of these materials in a responsible manner and in accordance
with government regulations.
The authorities can provide you with information about how to dispose
of discarded domestic appliances in a responsible manner.
safety
The appliance should only be connected by a qualified technician.
The microwave oven has been designed for domestic use.
You should use it exclusively for cooking food.
The appliance is hot during and after use.
Bear this in mind if young children come anywhere near the appliance.
Installation near to a conventional oven.
-Where a microwave oven is to be installed next to a conventional oven,
sufficient space between them should be allowed to prevent overheating,
as the surround can wrap with excessively high temperatures, Obviously,
it is important to adherent strictly to the conventional oven manufacturer's
installation instructions.
-A built-in microwave oven must not be installed above a conventional
oven otherwise the microwave oven's cooling system may be adversely
affected by hot air produced by the conventional oven.
Building-in dimensions
electrical connection
The house mains to which the appliance is connected should comply
with national and local regulations.
If you wish to make a fixed connection, ensure that a multipolar switch
with a minimum contact spacing of 3 mm is fitted in the supply line.
C
M
Y
CM
MY
1. Use the 3mm drill to make holes. Fix screws into BKT-Install. (Fig1)
CY
CMY
2. Insert the microwave oven into the cabinet. (Fig2)
K
3. Use the template to place the BKT-Base 71mm away
from "A" side of the cabinet. (Fig3)
4. Use the 3mm drill to make holes. Fix screws into BKT-Base. (Fig4)
5. Attach the surround. (Fig5)
6. Make the electrical connection. Check that the appliance work.
BKT-Install
Fig1
Fig2
"A" side
BKT-Base
Fig3
Fig5
71mm
Fig4
EN
Download PDF