Samsung | APH503QG/XSG | Samsung APH503QG User Manual

APH503QG_E IB_20297
3/24/08 14:38
Page 25
FLOOR STAND TYPE AIR CONDITIONER
( Cooling and Heating )
This product is not manufactured for lran.
SVC Warraty will not be applicable and the user will be responsible
for service expenses when the product is used in lran.
E S F A DB98-20297A(6)
ESPAÑOL
FRANÇAIS
APH503QG
APH523QF
APH553QF
AP50Q1A
AP55Q1A
ENGLISH
USER’S MANUAL
Register your product at www.samsung.com/global/register
Safety Precautions
The following safety precautions must be taken when using your air conditioner.
WARNING
DURING
OPERATION
Risk of electric shock. • Can cause injury or death. • Disconnect all
remote electric power supplies before servicing, installing or cleaning.
• This must be done by the manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
◆ Users of this product are cautioned not to attempt repair of this product
at their own discretion. Instead, they are requested to directly contact a
designated service center or the outlet at which the product was
purchased.
◆ Never spill any kind of liquid into the unit. Should this happen, unplug
or main switch off the unit and contact an authorized service center.
◆ Do not insert anything between the air outlet blades because the inner
fan may be damaged and could cause injury. Keep children away from
the unit.
◆ Do not place any obstacles in front of the unit.
◆ Do not spray liquid of any kind into the indoor unit. Should this happen,
switch off the breaker used for your air conditioner and contact your
installation specialist.
◆ Make sure that the unit is correctly ventilated at all times:
Do not place clothing or other materials over it.
◆ If the wireless remote control will not be used for a long time, remove
the batteries. (If applicable)
◆ When using a wireless remote control, the distance should not be more
than 7 meters from the air conditioner. (If applicable)
DISPOSING OF THE UNIT
◆ Before throwing out the device, it is necessary to pull back the battery
cells and get rid of them safely for recycling reasons.
◆ When you need to dispose of the unit, consult your dealer. If pipes are
removed incorrectly, refrigerant may blow out and come into contact
with your skin, causing injury. Releasing refrigerant into the atmosphere
also damages the environments.
◆ Please recycle or dispose of the packaging material for this product in
an environmentally responsible manner.
OTHERS
◆ Never store or ship the air conditioner upside down or sideways to
avoid damage to the compressor.
◆ The appliance is not intended for use by young children or infirm
persons without supervision: Young children should be supervised to
ensure that they do not play with the appliance.
◆ Max current is measured according to IEC standard for safety and
current is measured according to ISO standard for energy efficiency.
E-2
ENGLISH
Contents
◆ PREPARING YOUR AIR CONDITIONER
■ Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Remote Control-Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . .
■ Operating Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
■ Using the Control Panel on the Indoor Unit . . . . . . . . . . . . . . . .
■ Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
4
6
7
8
8
8
8
◆ OPERATING YOUR AIR CONDITIONER
■ Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
■ Heating Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
■ Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . 11
■ Changing the Room Temperature Quickly . . . . . . . . . . . . . . . 12
■ Operating to the Long Distance . . . . . . . . . . . . . . . . . . . . . . . 13
■ Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . 14
■ Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
■ Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . 16
■ Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . 16
◆ PROGRAMMING YOUR AIR CONDITIONER
■ Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
■ Other Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
◆ RECOMMENDATIONS FOR USE
■ Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . .
■ Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . .
■ Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . .
■ Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . .
19
20
21
22
◆ TECHNICAL SPECIFICATIONS
E-3
View of the Unit
Indoor Unit
Air flow blades
(up/down orientation)
Air flow blades
(right/left orientation)
Air outlet
Remote
control holder
Air filter
To open the grille
Air inlet
◆ Hold the
upper
part of the
grille, then
pull it slightly
forward.
Control Panel You can operate the air conditioner with the control panel when you do not
wish to or cannot operate the air conditioner with the remote control.
Timer indicator
Operating mode indicators
(Cool, Heat, Auto, Dry, Fan)
Remote control sensor
Lock function indicator
Defrost indicator
Turbo function indicator
Set temperature
Indoor temperature
Outdoor operating indicator
On/Off button
Long function indicator
Fan speed
Temperature
adjustment buttons
Fan speed adjustment button
Operation mode selection button
Air Swing button
E-4
ENGLISH
Outdoor Unit
Air inlet(Rear)
Air outlet
Connection valve
E-5
Remote Control - Buttons
Temperature adjustment
buttons
Air flow swing buttons
Operation mode selection button
(Cool, Heat, Auto, Dry, Fan)
Off Timer button
Turbo/Long function button
(Only in the Cool mode)
Fan speed adjustment button
On/Off button
E-6
ENGLISH
Getting Started
You have just purchased a Floor stand type air conditioner and
it has been installed by your installation specialist.
Your Owner's Instructions contain much valuable information on using your
air conditioner. Please take the time to read them as they will help you take
full advantage of unit's features.
The booklet is organized as follows.
◆ The following figures are shown on pages from 4 to 6:
- Indoor and outdoor units
- Remote control (buttons and display)
They will help you find the buttons and understand the symbols displayed.
◆ In the manual, you will find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use three different symbols:
PRESS
PUSH
For the...
The illustrations are...
Remote control
In the upper part.
Unit itself
In the lower part.
HOLD DOWN
E-7
Inserting the Remote Control Batteries
You must insert or replace the remote control batteries when :
◆ You purchase the air conditioner
◆ The remote control does not work correctly
Note
◆ Use two AAA, LR03 1.5V batteries.
◆ Do not use old batteries or different kinds of batteries together.
◆ Batteries may be completely discharged after 12 months,
even if they have not actually been used.
1
Push the battery cover on the rear of the remote control with your thumb
in the direction of the arrow and remove it.
2
Insert the two batteries, taking care to respect the polarities :
◆ + on the battery with + on the remote control.
◆ - on the battery with - on the remote control.
3
Close the cover by sliding it back until it clicks into place.
Operating Preparation
Look around the indoor and outdoor unit. Confirm if any obstacles
that may prevent the air flow are present near the air conditioner.
1
Turn the power switch on.
IMPORTANT
ON
To operate the unit, the power switch is fitted to the wall
must be set to ON.
Using the Control Panel on the Indoor Unit
You can operate with the indoor unit when you do not wish to or cannot
operate the air conditioner with the remote control.
You can :
Adapt the On/Off, Temperature, Fan Speed, Operation Mode and
Air Swing settings to your specific requirements.
For example : Remote control is broken or lost.
Using the Remote Control
All air conditioner features except Lock function can be controlled from
your seat by using the remote control.
E-8
You can :
Adapt the Turbo, Long function and Fan Speed, Timer settings
to your specific requirements.
Note
You must operate the Turbo, Long function and Off Timer with
the remote control.
ENGLISH
Cooling Your Room
You must select the Cool mode if you wish to adjust the :
◆ Cooling temperature
◆ Fan speed when cooling
1
If necessary, press the
◆ The power indicator on the control panel comes on.
◆ The indoor unit beeps.
Result:
IMPORTANT
2
3
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Switched on
◆ Stopped
lt will start up normally after three minutes.
If the
is not displayed on the control panel, press the
remote control one or more times until it appears.
button on the
Result:
◆ The indoor unit beeps each time you press the
◆ The air conditioner runs in the Cool mode.
Note
You can change modes at any time.
button.
To adjust the temperature, press the
buttons on the remote control or
buttons on the control panel one or more times until the required temperature is
displayed. Possible temperatures are between 18OC and 30OC inclusive.
Result:
4
(On/Off) button.
◆ Each time you press the
buttons:
- The temperature is adjusted by 1OC.
- The indoor unit beeps.
◆ The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
◆ If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan is still operating.
Select the fan speed by pressing the
button on the remote control
or
button one or more times until the required setting is displayed :
Automatic(rotated :
➔
➔
)
Low
High
Turbo
Result:
5
◆ Each time you press the
button, the indoor unit beeps.
To control the direction of the air flow, refer to page 16.
E-9
Heating Your Room
You must select the Heat mode if you wish to adjust the :
◆ Heating temperature
◆ Fan speed when heating
1
If necessary, press the
◆ The power indicator on the control panel comes on.
◆ The indoor unit beeps.
Result:
IMPORTANT
2
3
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Switched on
◆ Stopped
lt will start up normally after three minutes.
If the
is not displayed on the control panel, press the
remote control one or more times until it appears.
button on the
Result:
◆ The indoor unit beeps each time you press the
◆ The air conditioner runs in the Heat mode.
Note
You can change modes at any time.
button.
To adjust the temperature, press the
buttons on the remote control or
buttons on the control panel one or more times until the required temperature is
displayed. Possible temperatures are between 16°C and 30°C inclusive.
Result:
4
(On/Off) button.
◆ Each time you press the
buttons:
- The temperature is adjusted by 1°C.
- The indoor unit beeps.
◆ The air conditioner starts heating, provided that the room
temperature is lower than the selected temperature.
◆ For the first 3~5 minutes, the fan may not operate to prevent
the cool air from running out of the indoor unit.
◆ If the room temperature reachs the set temperature, the air
conditioner stops heating, but the fan is still operating.
◆ The Defrost indicator( ) appears when frost forms on the outdoor
unit and disappears automatically after removing frost.
Select the fan speed by pressing the
button on the remote control
or
button one or more times until the required setting is displayed :
Automatic(rotated :
➔
➔
)
Low
High
Result:
5
button, the indoor unit beeps.
To control the direction of the air flow, refer to page 16.
Note
E-10
◆ Each time you press the
You can't control the airflow direction when the fan doesn't operate.
ENGLISH
Selecting the Automatic Operating Mode
You can start the air conditioner in the Automatic mode.
In the Automatic mode, the temperature and the optimum fan speed is
selected automatically.
1
If necessary, press the
Result:
IMPORTANT
2
(On/Off) button.
◆ The power indicator on the control panel comes on.
◆ The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Switched on
◆ Stopped
lt will start up normally after three minutes.
If the
is not displayed on the control panel, press the
remote control one or more times until it appears.
Result:
button on the
◆ The indoor unit beeps each time you press the
button.
◆ The air conditioner runs in the Auto mode.
Note
◆ You can change modes at any time.
◆ If the indoor temperature is higher than 21°C, the air
conditioner operates in the Cool mode. If the indoor
temperature is lower than 21°C, the air conditioner
operates in the Heat mode.
◆ Cooling operation
◆ Heating operation
3
To control the direction of the air flow, refer to page 16.
E-11
Changing the Room Temperature Quickly
The Turbo function is used to Cool /Auto(Cool) your room as quickly as possible.
F o r e x a m p l e : You have just come home and find that the room is very hot.
You wish to cool it down as quickly as possible.
The Turbo function operates for 30 minutes with the maximum setting before
returning automatically to the mode and temperature previously selected.
1
If necessary, press the
Result:
IMPORTANT
2
Press the
Result:
3
E-12
◆ The power indicator on the control panel comes on.
◆ The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Switched on
◆ Stopped
lt will start up normally after three minutes.
button.
◆ The air conditioner cools the room as quickly as possible.
◆ The temperature and fan settings are adjusted automatically.
◆ After 30 minutes, the air conditioner is reset automatically to
the previous mode, temperature and fan setting.
If you wish to stop the Turbo function before the end of 30-minute period,
press the
button twice.
Result:
4
(On/Off) button.
◆ The air conditioner is reset automatically to the previous
mode, temperature and fan settings.
◆ You can't select the Turbo and Long function simultaneously.
To control the direction of the air flow, refer to page 16.
ENGLISH
Operating to the Long Distance
The Long function is used to Cool/Auto(Cool) your room as far as possible.
In the Long function, the up/down orientation of air flow and fan
speed are selected automatically.
1
If necessary, press the
◆ The power indicator on the control panel comes on.
◆ The indoor unit beeps.
Result:
IMPORTANT
2
Press the
Result:
(On/Off) button.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Switched on
◆ Stopped
lt will start up normally after three minutes.
button twice.
◆ The air conditioner cools the room as far as possible.
◆ The fan settings are adjusted automatically.
3
To adjust the temperature, press the
buttons one or more times until the
required temperature is displayed. Possible temperatures are between 18°C
and 30°C inclusive.
Result: ◆ Each time you press the
buttons:
- The temperature is adjusted by 1°C.
- The indoor unit beeps.
4
If you wish to stop the Long function, press the
Result:
5
button again.
◆ The air conditioner is reset automatically to the previous
mode, temperature and fan settings.
To control the direction of the air flow vertically, refer to page 16.
Note
You can't control the airflow direction horizontally in the Long function.
E-13
Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature too much.
1
If necessary, press the
Result:
IMPORTANT
2
(On/Off) button.
◆ The power indicator on the control panel comes on.
◆ The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Switched on
◆ Stopped
lt will start up normally after three minutes.
If the
is not displayed on the control panel, press the
remote control one or more times until it appears.
Result:
button on the
◆ The indoor unit beeps each time you press the
button.
◆ The air conditioner runs in the Dry mode.
Note
3
To adjust the temperature, press the
buttons one or more times until the
required temperature is displayed. Possible temperatures are between 18°C
and 30°C inclusive.
Result:
E-14
You can change modes at any time.
◆ Each time you press the
buttons:
- The temperature is adjusted by 1°C.
- The indoor unit beeps.
◆ The air conditioner starts removing the excess humidity;
◆ the quantity of air is adjusted automatically.
4
The fan speed is selected automatically(
5
To control the direction of the air flow, refer to page 16.
: Automatic).
ENGLISH
Airing Your Room
If the atmosphere in your room is stale, you can air the room using
the Fan feature.
1
If necessary, press the
Result:
IMPORTANT
2
(On/Off) button.
◆ The power indicator on the control panel comes on.
◆ The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Switched on
◆ Stopped
lt will start up normally after three minutes.
If the
is not displayed on the control panel, press the
remote control one or more times until it appears.
Result:
◆ The indoor unit beeps each time you press the
button on the
button.
◆ The air conditioner runs in the Fan mode.
Note
3
You can change modes at any time.
Select the fan speed by pressing the
until the required setting is displayed:
Low
button one or more times
High
Turbo
Result:
4
◆ Each time you press the
button, the indoor unit beeps.
To control the direction of the air flow, refer to page 16.
E-15
Adjusting the Air Flow Direction Vertically
Depending on the position of the indoor unit your room, you can
adjust the position of the outer air flow blade on the upper part of
the unit, thus increasing the efficiency of the air conditioner.
1
Press the
Result:
button.
◆ The outer blade moves up and down.
RECOMMENDATION
2
When...
Adjust the blade to face...
Cooling
Upwards.
Heating
Downwards.
To stop the blade moving up and down, press the
button again.
Adjusting the Air Flow Direction Horizontally
There are two sets of air flow blades. Just as the outer air flow
blade can be adjusted vertically, the inner blade can be adjusted
horizontally.
1
Press the
Result:
2
button.
◆ The inner blade moves right and left.
To stop the blade moving right and left, press the
Note
button again.
◆ You can't control the airflow direction horizontally in the Long Function.
◆ You can't control the airflow direction when the fan doesn't
operate in the Heat mode.
E-16
ENGLISH
Setting the Off Timer
The Off Timer enables you to switch off the air conditioner automatically
after a given period of time. You can set the period of time from 1 to 8
hours. You can select the Off Timer only when the air conditioner is on.
To set the operating time, press the
button one or more times until the
required time is displayed. Possible time is between 1 hour and 8 hours
inclusive.
Result:
◆ After blinking of the timer indicator for 5 seconds, it will be
changed to temperature setting.
◆ The air conditioner will switch off automatically after the set
time and the Off Timer indicator disappears.
Note
You can see or change the setting mode and/or the temperature
by pressing the
button or the
buttons after setting the
Off Timer.
To Cancel the Off Timer
Press the
disappears.
button one or more times until the Off Timer indicator
E-17
Other Function
You can use the Lock function on the control panel of the indoor unit.
1
Press the
Result:
buttons simultaneously for 3 seconds.
◆
indicates on the control panel.
◆ The control panel is locked.
Note
2
E-18
You can use the remote control even if the control panel is
locked.
To cancel the Lock function, press the
3 seconds once again.
buttons simultaneously for
ENGLISH
Operating Recommendations
Here are a few recommendations that you should follow when using
your air conditioner.
Topic
Recommendation
Heating performances
The heat pump inside the air conditioner
absorbs heat from outside air and brings it
indoors. If the temperature of the outside air
drops, the air conditioner will heat less.
Warm air circulation
The air conditioner circulates warm air to heat
your room; as a result, some time will be
required after starting the air conditioner to
warm the entire room. If necessary, set the air
conditioner on before you wish to use the
room.
Frost
When outside temperatures are low and
humidity is high, frost may form in the outdoor
unit when heating is selected.
If this happens:
◆ The heating operation is stopped.
◆ The Defrost(
) mode is triggered
automatically for about 7 minutes.
No intervention is required from you; after
about 7 minutes, the air conditioner starts
operating again normally.
High indoor and outdoor
temperatures
If both the indoor and outdoor temperatures
are high and you select the Heat mode, the
outdoor unit’s fan and compressor may stop at
times. This is normal; simply wait until the air
conditioner switches on again.
Power failure
If a power failure occurs when the air conditioner
is operating, the unit is switched off.
When the power returns, you must press the
(On/Off) button to restart it.
E-19
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges,
within which the air conditioner can be used.
If the air conditioner is used at...
Then...
High temperature
The automatic protection feature may be
triggered and the air conditioner stopped.
Low temperature
A water leakage or some other
malfunction may happen if the heat
exchanger freezes.
High humidity levels
Water may condense on and drip from
the surface of the indoor unit if it is used
for a long periods.
Mode
Indoor Temperature
27°C or less.
Indoor Humidity
Heating
0°C to 24°C approx.
Cooling
21°C to 54°C approx.
18°C to 32°C approx.
80% or less
Drying
18°C to 54°C approx.
18°C to 32°C approx.
-
❇
E-20
Outdoor Temperature
-
If the outdoor temperature is as low as 0°C, the heating capacity drops
up to 70~80% depending on the operation condition.
If the cooling operation is used at over 33°C(indoor temperature),
it does not cool at its full capacity.
ENGLISH
Cleaning Your Air Conditioner
For the best use of your air conditioner, you must clean it every 2
weeks regularly to remove the dust that accumulates on the air filter.
IMPORTANT
Before cleaning your air conditioner, ensure that you have switched
off the breaker for the unit.
1
Open the front grille, then pull out the air filter.
2
Remove all dust on the air filter with a vacuum cleaner or brush.
3
When you have finished, insert the air filter into the original position and
close the front grille.
4
Clean the unit with a damp cloth and mild detergent (do NOT use benzene,
solvents or other chemicals).
Note
If you have not used the air conditioner for a long period of time,
set the fan going for 3 to 4 hours to dry the inside of the air conditioner
thoroughly.
E-21
Solving Common Problems
Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Explanation/Solution
Problem
E-22
The air conditioner does not
operate at all
◆ Check that the breaker used for the air conditioner is switched on.
◆ Check that the indoor unit is turned on;
if necessary press the
(On/Off) button on the remote control.
◆ Check whether the Timer indicator on the indoor unit is switched on.
If so:
- Wait until the switch-on time is reached and the air conditioner starts
up automatically.
- Cancel the Timer (see page 17 for further details).
The air conditioner does not
operate with the remote control
◆ Check that there are no obstacles between you and the indoor unit.
◆ Check the remote control batteries.
◆ Check that you are close enough to the indoor unit (7 meters/ yards
or less).
No beep is heard when you press
the
(On/Off) button on the
remote control
◆ Check that you are pointing the remote control at the remote control
sensor of the indoor unit.
◆ Replace the remote control batteries if necessary.
The air conditioner does not cool
or heat
◆ Check that the correct operating mode has been selected
(Cool, Auto, Heat).
◆ The room temperature may be too low or too high.
◆ Dust may be blocking the air filter guard; refer to page 21 for cleaning
instructions.
◆ Check that there is no obstacle in front of the outdoor unit.
The fan speed does not change
when you press the
button
◆ Check that the operating mode is set to Cool, Heat or Fan;
in the Auto, Turbo, Long and Dry mode, the fan speed is
controlled automatically.
The air flow direction does not
change when you press the
or
button
◆ Check that the air conditioner has been switched on; if necessary,
press the
(On/Off) button on the remote control.
The Timer is not correctly triggered
◆ Check that the timer has been programmed correctly;
see page 17.
Odour is permeated in the room
during air conditioning
◆ Air the room.
APH503QG_E IB_20297
2/27/07 1:22 AM
Page 23
ENGLISH
Technical Specifications
Model
APH503QG
AP50Q1A
Power Supply
3N~, 380V, 50Hz
APH523QF
APH553QF
3~, 220V, 60Hz
AP55Q1A
E-23
APH503QG_E IB_20297
3/24/08 14:38
Page 24
ELECTRONICS
Contact SAMSUNG WORLD WIDE
If you have any comments or questions regarding a Samsung product, contact the SAMSUNG
customer care center.
Country
Customer Care Center
☎
Web Site
TURKEY
444 77 11
www.samsung.com
SOUTH AFRICA
0860-SAMSUNG (726-7864)
www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
8000-4726
C Samsung Electronics Co., Ltd. All Rights Reserved.
www.samsung.com
Download PDF

advertising