Samsung | SC8040 | Samsung SC8040 User Manual

DJ68-00316C-EN (0.0)
4/15/05 4:09 PM
Page 1
Operating Instructions
VACUUM CLEANER
❈ Before
❈ Indoor
operating this unit, please read the instructions carefully.
use only.
Register your product at www.samsung.com/global/register
DJ68-00316C-EN (0.0)
4/15/05 4:09 PM
Page 1
IMPORTANT SAFEGUARDS
1. Read all instructions carefully. Before switching on, make sure that the voltage of your
electricity supply is the same as that indicated on the rating plate on the bottom of the
cleaner.
2. WARNING: Do not use the vacuum cleaner when rug or floor is wet.
Do not use to suck up water.
3. Close supervision is necessary when any appliance is used by or near children. Do not
allow the vacuum cleaner to be used as a toy. Do not allow the vacuum cleaner to run
unattended at any time. Use the vacuum cleaner only for its intended use as described in
these instructions.
4. Do not use the vacuum cleaner without a dust bag (dust bin). Empty the dust bin before it
is full in order to maintain the best efficiency.
5. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep the
vacuum cleaner away from stoves and other heat sources. Heat can deform and discolour
the plastic parts of the unit.
6. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the
cleaner parts. Do not stand on the hose assembly. Do not put a weight on the hose. Do
not block the suction or the exhaust port.
7. Switch the vacuum cleaner off on the body of the machine before unplugging from the
electrical outlet. Disconnect plug from the electrical outlet before changing the dust bag or
dust container. To avoid damage, please remove the plug by grasping the plug itself, not
by pulling on the cord.
8. This appliance is not intended for use by young persons or infirm persons without
supervision unless they have been adequately supervised by a responsible person to
ensure that they can use the appliance safely.
Young children should be supervised to ensure that they do not play with the appliance.
9. The plug must be removed from the socket outlet before cleaning or maintaining the appliance.
10. The use of an extension cord is not recommended.
11. If your vacuum cleaner is not operating correctly, switch off the power supply and consult
an authorized service agent.
12. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
13. Don’t carry the vacuum cleaner by holding the hose.
Use the handle on the vacuum cleaner set.
1
DJ68-00316C-EN (0.0)
4/15/05 4:09 PM
Page 2
1 ASSEMBLING THE CLEANER
NOTE : Use the Cyclone Filter to vacuum for long without emptying the Cassette Filter.
▼
OPTION
Features may vary according to model.
For storage, park the floor nozzle.
2
DJ68-00316C-EN (0.0)
4/15/05 4:09 PM
Page 3
2 OPERATING THE CLEANER
2-1 POWER CORD
NOTE
When removing the
plug from the
electrical outlet, grasp the
plug, not the cord.
2-2 POWER-CONTROL (INFRARED-CONTROL)
SENDER
HANDLE CONTROL
BODY CONTROL
Press Power Control on the main
body to turn on the power (MAX).
And, press it again to turn it off (STOP).
NOTE
1. When using the control button for suction power, make sure that the transmitter of the
remote controller not be blocked by your body.
2. When operating the cleaner in a room with a high ceiling or under intensive light, the suction power controlling button may not work properly. So, use the "Power Control" button on
the main body.
3. When the battery is run down, it does not work with the button pressed on the handle
control part. In this case, replace the battery. (How to change: Refer to User Manual No.7)
3
DJ68-00316C-EN (0.0)
4/15/05 4:09 PM
Page 4
2-3 USING FLOOR TOOLS
Carpets
CREVICE
Bare floors
DUSTING
UPHOLSTERY
OPTION
Smart Brush
OPTION
Blanket Brush
Cut off pet
hairs or threads
surrounding
brush by using
scissors.
bedclothes or blanket
OPTION
Pet Brush
Detach transparent drum cover
for easy cleaning.
4
DJ68-00316C-EN (0.0)
4/15/05 4:09 PM
Page 5
3 NANO SILVER FUNCTION (OPTIONAL)
Silver nano particles are incorporated into the dust bin and the exhaust filter.
DUST BIN
EXHAUST FILTER
4 NEGATIVE IONS FUNCTION (OPTIONAL)
- Model with the negative ion function
When power is applied to the unit, the “GREEN”
LED turns on and negative ions come out.
- Model without the negative ion function
When power is applied to the
unit, the “RED” LED turns on.
GREEN
RED
WARNING
1. Do not put it near the TV with its power on.
2. Do not put an iron skewer into the negative ion discharge port.
3.Do not pour liquid, etc into the negative ion discharge port.
4.Do not put any object into ionizer opening.
5
DJ68-00316C-EN (0.0)
4/15/05 4:09 PM
Page 6
5 INDICATOR LIGHTS
When the indicator light comes on, please empty
and clean the Cyclone Filter (5-1) and the Basket
filter (5-2) as shown in the following illustrations.
5-1 CLEANING THE CYCLONE FILTER (OPTIONAL)
5-1-1 EMPTYING THE CYCLONE FILTER
1
2
3
5-1-2 CLEANING THE CYCLONE FILTER
1
2
3
4
5
6
7
8
NOTE
The Cyclone Filter must
be used at all times to
retain optimum efficiency.
6
DJ68-00316C-EN (0.0)
4/15/05 4:09 PM
Page 7
5-2 CLEANING THE BASKET FILTER
5-2-1 EMPTYING THE BASKET FILTER
1
2
3
4
5
6
NOTE
You can rinse the basket filter with water.
Do not immerse the whole cleaner in water.
Ensure completely dry before replacing.
7
DJ68-00316C-EN (0.0)
4/15/05 4:09 PM
Page 8
5-2-2 CLEANING THE CASE FILTER
1
4
2
5
3
7
6
NOTE : Please do not throw away the filter. It must be retained to maintain cleaning efficiency.
6 CLEANING THE FILTER
6-1 CLEANING THE INLET FILTER
1
2
3
6-2 CLEANING THE OUTLET FILTER
1
2
3
NOTE : Please do not throw away the filter. It must be retained to maintain cleaning efficiency.
8
DJ68-00316C-EN (0.0)
4/15/05 4:09 PM
Page 9
7 CHANGE THE BATTERY
BATTERY TYPE : AA Size
NOTE
When the vacuum cleaner does not operate, replace the batteries.
If the problem persists, please contact our authorized dealer.
1. Never disassemble or recharge the batteries.
WARNING 2. Never heat up the batteries or throw them into fire.
3. Do not reverse (+),(-) terminals.
4. Dispose the batteries properly.
- IF YOU HAVE A PROBLEM
PROBLEM
Motor does not start.
CAUSE
REMEDY 0
No power supply.
Thermal cut-out.
Nozzle, suction hose or tube
is blocked.
Check cable, plug and socket.
Leave to cool.
Check for blockage and
remove.
Check that the cord is not
twisted or wound unevenly.
Pull the cord out 2-3m and
push down the cord rewind
button.
Vacuum cleaner does not
pick up dirt.
Crack or hole in hose.
Check hose and replace if
required.
Low or decreasing suction
Filter is full with dust.
Please check filter and, if
required, clean as illustrated
in the instructions.
Suction force is gradually
decreasing.
Cord does not rewind fully.
9
DJ68-00316C-EN (0.0)
4/15/05 4:09 PM
Page 10
DJ68-00316C REV(0.0)
Download PDF