Samsung | DVD-CM350 | Samsung DVD-CM350 Benutzerhandbuch

DVD-VCR
DVD-CM350
Instruction Manual
www.samsungvcr.com
Contents
Contents (cont.)
GB
GB
◆ FOREWORD
■
Disc Type and Characteristics.......................................................................
6
◆ DVD-VCR OVERVIEWS
■
■
■
■
■
Front View of the DVD-VCR ..........................................................................
Rear View of the DVD-VCR...........................................................................
Infrared Remote Control ................................................................................
Display Indicators ..........................................................................................
Accessories ...................................................................................................
■
7
7
8
9
9
■
■
■
■
■
■
■
■
■
■
■
Deciding How to Connect DVD-VCR.............................................................
Connecting DVD-VCR to the TV using the Coaxial Cable ............................
Connecting DVD-VCR to the TV using the SCART Cable ............................
Connecting DVD-VCR to a Satellite Receiber or Other Equipment ..............
Plug & Auto Set up ........................................................................................
Tuning Your Television for the DVD-VCR .....................................................
Deck Control Keys.........................................................................................
Basic TV Tuner Operations ...........................................................................
Copying from DVD to VCR ............................................................................
Inserting Batteries in the Remote Control......................................................
Setting the Date and Time.............................................................................
Menu Language.............................................................................................
10
11
11
12
13
14
15
16
17
18
18
19
■
■
■
■
■
■
■
■
■
■
■
■
■
Presetting the Stations Automatically ............................................................
Presetting the Stations Manually ...................................................................
Clearing a Preset Station...............................................................................
Changing the Preset Station Table................................................................
Selecting the RF OUT Sound Mode (B/G-D/K) .............................................
Setting the DVD-VCR Output Channel..........................................................
Selecting the Colour Mode ............................................................................
NICAM ...........................................................................................................
Intelligent Picture Control ..............................................................................
Auto Power off ...............................................................................................
ShowView EXTEND ......................................................................................
Selecting the Cassette Type..........................................................................
Auto Repeat Play...........................................................................................
OSD...............................................................................................................
20
21
22
23
24
24
25
25
26
26
27
28
28
29
◆ RECORDING TELEVISION BROADCASTS
■
■
■
■
■
■
■
■
■
2
Selecting the Recording Speed .....................................................................
Protecting a Recorded Cassette....................................................................
Recording a Programme Immediately ...........................................................
Recording a Programme with Automatic Stop...............................................
Using the ShowView Feature ........................................................................
Modifying ShowView Programming...............................................................
Using the Timer Programming Feature .........................................................
Checking a Preset Recording........................................................................
Cancelling a Preset Programme....................................................................
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
29
30
30
31
32
33
34
35
35
Playing a Cassette.........................................................................................
Adjusting Picture Alignment Automatically ....................................................
Adjusting Picture Alignment Manually ...........................................................
Selecting the Audio Output Mode..................................................................
Playing a Cassette in Slow Motion ................................................................
Playing a Sequence Frame by Frame ...........................................................
Playing a Sequence at Variable Speeds .......................................................
Searching for a Specific Sequence ...............................................................
Using the Tape Counter ................................................................................
Connecting an RCA Audio/Video Input Cable ...............................................
Using the Assemble Edit Function.................................................................
Recording from Another VCR or Camcorder.................................................
Audio Dubbing a Pre-recorded Cassette.......................................................
Using the TV Buttons on the Remote Control ...............................................
SQPB (Super VHS Quasi Playback) .............................................................
36
36
36
37
37
38
38
39
40
41
42
42
43
44
45
◆ DVD FUNCTIONS
■
◆ SETTING UP YOUR DVD-VCR
■
■
■
◆ CONNECTING YOUR DVD-VCR
■
◆ PLAYING BACK
■
■
■
■
■
■
■
Playing a Disc................................................................................................
Using the Search & Skip Functions ...............................................................
Choosing a Connection .....................................................................................
Using the Setup Menu ...................................................................................
Using the Disc Menu Language ....................................................................
Setting Up the Audio Language Features .....................................................
Using the Subtitle Language .........................................................................
Setting Up the Parental Control.....................................................................
Setting Up the Audio Options ........................................................................
Setting Up the Display Options......................................................................
S-Video Connections (for DVD).....................................................................
Special Playback Features ............................................................................
Using the Display Function (DVD/VCD/CD) ..................................................
Repeat Play ...................................................................................................
Programmed Playback (CD)..........................................................................
Random Play (CD) ........................................................................................
SCREEN FIT Play .........................................................................................
Selecting the Audio Language (Using the Audio button)...............................
Selecting the Subtitle Language (Using the Subtitle button) .........................
Changing the Camera Angle .........................................................................
Using the Mark Function (DVD/VCD) ............................................................
Recalling a Marked Scene.............................................................................
Clearing a Mark .............................................................................................
Using the Zoom (DVD/VCD)..........................................................................
MP3 Play .......................................................................................................
MP3 Play (CD-R MP3 disc requirements) .....................................................
46
47
48
49
50
51
51
52
53
54
55
56
57
58
59
59
60
61
61
62
63
63
63
64
64
65
3
Contents (cont.)
Safety Instructions
GB
GB
◆ Appendix A - Advanced Connections
Connecting the FM and AM antennas ...........................................................
Connecting the Speakers ..............................................................................
AUX Audio Setting.........................................................................................
Speaker Volume Control ...............................................................................
Speaker setup ...............................................................................................
Dolby Pro Logic II decoder ............................................................................
Sound mode/effect function...........................................................................
Listening to radio broadcasts.........................................................................
Presetting stations .........................................................................................
■
■
■
■
■
■
■
■
■
66
67
68
68
69
71
72
73
73
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
◆ SOLVING PROBLEMS
Technical Specifications ................................................................................
Problems and Solutions (VCR)......................................................................
Troubleshooting Guide (DVD) .......................................................................
■
■
■
74
75
77
This manuel is divided into two sections:
one describing the VCR; the other, the DVD.
Prior to undertaking anything, please verify in which section you actually are by
checking either the VCR or DVD symbols or the header of the chapter.
Do NOT expose the DVD-VCR
to extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or lightning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corpration and other rights owners. Use of this copyright
protection technology must by authorized by Macrovision Corporized by
Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Symbols
1
1
☛
➢
Press/push
Hold down
Important
Note
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
1 = Step number
4
5
Disc Type and Characteristics
Front View of the DVD-VCR
GB
GB
This DVD player is capable of playing the following types of discs with the corresponding logos :
STANDBY/ON
BUTTON
Disc Types
(Logos)
Recording Disc Size
Types
DVD
12 Cm
Audio
+
Video
8 Cm
VIDEO-CD
12 Cm
Audio
+
Video
Max.
Playing
Time
Characteristics
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
OPEN/CLOSE
BUTTON
20 min.
F.F/SKIP NEXT
BUTTON
STOP
BUTTON
HEADPHON
JACK
AUDIO-CD
RECORD
BUTTON
VIDEO CASSETTE
COMPARTMENT
FM/AM
SELECT
BUTTON
EJECT BUTTON
74 min.
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
8 Cm
DVD DECK
12 Cm
74 min.
8 Cm
20 min.
Audio
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
PLAY/PAUSE
BUTTON
COPY
BUTTON
SOUND
EFFECT
INPUT SELECT
DVD/VCR SELECT
BUTTON
VOLUME
PROGRAMME
SELECTION
BUTTONS
REW/SKIP BACK
BUTTON
Rear View of the DVD-VCR
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
Disc Markings
PAL
• Playback
Region
Number
• PAL colour
system in U.K,
France, Germany,
etc.
RADIO FM
ANTENNA INPUT
NTSC
STEREO
• Stereo
• NTSC broadcast • Dolby
Digital disc
disc
system in USA,
Canada, japan,
South Korea, etc.
AV2 (DEC./EXT.) SCART
(EURO-21) SOCKET
AUX AUDIO L, R
IN/OUT SOCKETS
DIGITAL
SOUND
• Digital
Audio disc
AERIAL IN
CONNECTOR
COOLING FAN
SPEAKER OUT
S-VIDEO OUT
• DTS disc
• ”DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
• Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
Playback Region Number
OPTICAL INPUT
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
6
RADIO AM
ANTENNA INPUT
OUT TO TV
CONNECTOR
VIDEO IN/OUT
SOCKETS
AV1 (EURO AV) IN/OUT
SCART (EURO-21) SOCKET
AUDIO L, R OUT
SOCKETS
7
Infrared Remote Control
Display Indicators
GB
GB
GB
1
1
21
2
22
23
3
24
4
25
5
6
26
27
28
7
29
8
9
30
10
11
12
31
32
33
34
13
14
15
16
17
18
19
20
35
36
37
38
39
40
41
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
STANDBY/ON
OPEN/CLOSE, EJECT
SPEAKER SELECT
TEST
MODE, REPEAT
ANGLE
TV VOLUME
TV SELECT
DVD, VCR, FM/AM, INPUT
SELECT
REWIND, SKIP BACK
STOP
DISPLAY
SETUP
UP
LEFT
ENTER
RECORD
MARK, INDEX
AUDIO
TITLE, SPEED
TV STANDBY/ON
MUTE
0-9
SOUND MODE
SOUND EFFECT
STEP
ZOOM/ATR
PROG/TRK œ/❷
AMP VOLUME
TV INPUT
FAST-FORWARD, SKIP
NEXT
PLAY/PAUSE
CLEAR
DISC MENU
RIGHT
DOWN
RETURN, A.DUB
SUBTITLE, TIMER
SCREEN FIT, SVHS
TV/VCR
JOG/SHUTTLE
12
2
4
5
6
7 8 9 19 10
13 14 15 16 17
21
1 The DVD Deck is selected
2 A DVD, CD, VCD or SVCD is loaded
3 A disc with LPCM (Linear Pulse Code Modulation)
audio is loaded
4 A DVD with a Dolby Digital is loaded
5 A DVD with a DTS soundtrack is loaded
6 The time, counter position, time remaining or
current deck status is displayed
7 The current TV show or video is broadcast in Stereo
8 The Hi-Fi track of a VHS tape is playing
9 A Timer Recording is programmed or in progress.
If blinking there is an error.
10 Tape Speed
11 The VCR Deck is selected
20
11
18
12 The status of the DVD deck is graphically displayed
13 The DVD has multiple angles.
14 MP3
15 A MPEG Audio Disc is loaded.
16 The number to the right of the “T” symbol is the
current title number
17 The number to the right of the “C” symbol is the
current chapter number
18 VHS tape is inserted and the VCR Deck is active
19 NICAM Indicator
20 COPY mode Indicator
21 VPS or PDC Indicator
Accessories
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
REMOTE CONTROL
BATTERIES
8
3
AUDIO & VIDEO CABLE
OWNER’S INSTRUCTIONS
AM ANTENNA CABLE
COAXIAL CABLE
FM ANTENNA CABLE
9
Deciding How to Connect DVD-VCR
GB
You must take into account various factors when connecting audio or video systems:
Connecting DVD-VCR to the TV using the Coaxial Cable
◆
◆
◆
◆
◆ Types of connectors available on your systems
◆ Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector
Location
AV1 (EURO AV) Rear
AV2 IN
Rear
AUDIO input
Rear
AUDIO output
VIDEO input
Rear
VIDEO output
Type
SCART
SCART
Direction
Recommended Use
In/Out
◆ Television
◆ Satellite receiver
◆ Other VCR
In
☛
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Remove the aerial or network input cable from the television.
2
◆ Satellite receiver
◆ CANAL/DECODER
◆ Other VCR
Connect this cable to the 75Ω coaxial socket marked
rear of your DVD-VCR.
3
Plug the coaxial cable supplied into the
DVD-VCR.
on the
socket on your
Audio RCA
In
◆ Audio in
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
Audio RCA
Out
◆ Audio out
5
RCA
In
◆ Video in
To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the SCART
cable (see section below) if your television is equipped with this
type of connection.
RCA
Out
◆ Video out
Rear
S-JACK
Out
◆ S-Video out (DVD only)
AUDIO
output
Rear
RCA
Out
◆ Audio out (DVD only)
2
Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
1
S-VIDEO
output
GB
To receive television programmes a signal must be received from
one of the following sources:
TV
4
3
Connecting DVD-VCR to the TV using the SCART Cable
Aeria
TV
IN FROM ANT. Rear
75 Ω
coaxial
In
◆ Aerial
◆ Cable television network
◆ Satellite receiver
75 Ω
coaxial
Out
Rear
Optical
In
◆ Digital Audio In
FM/AM Antenna Rear
Input
75 Ω
coaxial
In
◆ FM Antenna
OUT TO TV
Digital Audio
Input
Rear
3
◆ Television
2
SCART Cable
RF coaxial cable
You can connect your DVD-VCR to the television using the SCART cable if the appropriate input is
available on the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
☛
◆ AM Antenna
◆ Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the DVD-VCR is switched
off.
◆ Make sure that both the television and the DVD-VCR are switched off before connecting the
cables.
☛Whenever
you connect an audio or video system to your DVD-VCR, ensure that all elements are
switched off.
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the SCART cable to the AV1 (EURO AV) socket on the rear of the DVD-VCR.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
3
Plug the other end into the appropriate connector on the television.
10
11
Connecting DVD-VCR to a Satellite Receiver or Other Equipment
Plug & Auto Set up
GB
GB
You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the
appropriate outputs are available on the equipment chosen. The following illustrations give a few examples
of the connection possibilities.
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
TV
1. AV1(EURO AV): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the
DVD-VCR.
After making this connection, select the source by pressing the INPUT button for the AV1 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
Aerial
Satellite Receiver or other Equipment
1
Connect the coaxial cable as indicated on page 12.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2
Plug the DVD-VCR into the mains.
3
Set “Language”
Move the selection bar to your desired Language, then press
ENTER button.
4
Start the auto scanning.
◆ The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
5
The time and date are displayed. See page 18, Check the date
and time.
◆ It is correct, Press RETURN button twice to exit the menu.
Aerial Connector
2
➢
TV
1
2
Auto preset can be performed by pressing ■ (STOP) on
the VCR continuously for 5 seconds or more with no
tape inserted.
SCART Cable
RF coaxial cable
LANGUAGE SET
❿ English
Français
Deutsch
Español
Italiano
Nederlands
1. AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of
the DVD-VCR.
After making this connection, select the source by pressing the INPUT button for the AV2 input sources.
RETURN
œ❷
ENTER
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
Aerial
Satellite Receiver or other Equipment
AUTO SET UP
PLEASE WAIT
Aerial Connector
60%
I■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ -------I
RETURN
2
1
TV
CLOCK SET
12:01
1/JAN/2003
WED
SCART Cable
RF coaxial cable
12
➛❿œ❷
RETURN
13
Tuning Your Television for the DVD-VCR
Deck Control Keys
GB
GB
You must tune your television for the DVD-VCR only if you are not
using a Scart cable
➢
2
To view pictures from your DVD-VCR when a Scart cable
is used, the television must be set to the audio/video
mode (AV).
1
Switch on the television.
2
Switch on the DVD-VCR by pressing STANDBY/ON on the front of
the DVD-VCR or STANDBY/ON on the remote control.
3
Select a programme position on the television to be reserved for
use with your DVD-VCR.
4
Insert the video cassette in the DVD-VCR. Check that the
DVD-VCR starts reading the cassette; if not, press ❿II button.
5
Start a scan on your television or set the television to UHF
channel 36.
6
Fine tune the television until the pictures and sound are obtained
clearly.
7
If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 24 and Problems and Solutions on page
76).
4
8
The DVD-VCR uses one set of controls to operate both decks. The
following keys are helpful in successfully controlling each deck.
1
STANDBY/ON Button
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
2
DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
3
VCR Button
Press the VCR button on remote control when you want to control
the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to show
that VHS deck is selected.
4
FM/AM Button
Each time you press the button, the band alternates between
FM and AM.
5
INPUT Button
Press the INPUT button repeatedly to cycle through all of your
input sources, including the Tuner (PR##), AV1, AV2 and AUX
(rear RCA input).
1
1
3
2
4
When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
Result:
That programme is now reserved for use with your
DVD-VCR.
5
14
15
Basic TV Tuner Operations
Copying from DVD to VCR
GB
GB
The following buttons are used when watching television via the
DVD-VCR’s built-in TV tuner.
1
1
TV / VCR Button
Press to switch between your TV’s tuner and the VCR’s internal
tuner.
2
PROG Up/Down Button
Press to change to the next or previous channel.
3
0-9 Buttons
Press to select channels directly.
4
Display
Press to display the channel you are watching.
◆ Also works in DVD and VCR mode.
The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1
Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2
Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3
Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
◆ The DVD will go into Play mode and the VCR will go into Record
mode.
4
Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
◆ You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
2
2
☛
1
2
The NTSC DVD or VCD Copy process can not active.
3
3
4
4
16
4
17
Inserting Batteries in the Remote Control
GB
Menu Language
GB
You must insert or replace the batteries in the remote control when
you:
1
◆ Purchase the DVD-VCR
◆ Find that the remote control is no longer working
correctly
2
1
1
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2
Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
Open “MAIN MENU”
With the DVD in stop mode, press the SETUP button.
Set “Language”
Using the Up/Down and Left/Right buttons, move the selection
arrow to Language set then press ENTER button.
3
1
Set menu Language
Move the selection bar to your desired Language, then press
ENTER button.
MAIN MENU
➢
Do not mix different battery types (manganese and
alkaline for example).
LANGUAGE SET
RETURN
œ❷➛❿
Setting the Date and Time
LANGUAGE SET
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
automatically
MAIN MENU
You must set the date and time when:
◆ You purchase the DVD-VCR
☛
CLOCK SET
RETURN
œ❷➛❿
ENTER
CLOCK SET
12:00
1/JAN/2003
WED
➛❿œ❷
RETURN
18
Français
Deutsch
Español
Italiano
Nederlands
RETURN
1
Press SETUP on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
CLOCK SET option.
3
Press the ENTER button to select this option.
Result:
The CLOCK SET menu is displayed.
4
Press ➛ or ❿ to select the hour, minutes, day, month and year.
Result:
The option selected flashes.
5
Press the œ or ❷ buttons to increase or decrease the value.
Result:
The day of the week is displayed automatically.
6
❿ English
œ❷
◆ Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
➢
ENTER
œ,❷
or ➛, ❿ buttons to select the
You can hold the œ or ❷ buttons down to scroll more
quickly through the values.
On completion, press RETURN to exit the menu.
19
ENTER
VCR
Presetting the Stations Automatically
☛
GB
MAIN MENU
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
INSTALLATION
RETURN
œ❷➛❿
ENTER
You must preset the stations received through the tuner. This can
be done:
◆ Automatically
◆ Manually (see page 21)
You can store up to 80 stations.
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
:K
:CH36
œ❷ENTER
RETURN
YOUR DATA WILL BE LOST
1
Press the SETUP button on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
INSTALLATION option.
3
Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the AUTO SET UP
option is selected. And then press the ENTER button to select this
option.
Result:
The country selection MENU is displayed.
5
PRESS ENTER TO CONTINUE
RETURN TO EXIT
AUTO SET UP
Press the œ or ❷ buttons to select your country.
☛ The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
6
Press ENTER button.
Result:
A message appears, indicating that any channels
already preset on your VCR will be deleted.
7
Press ENTER to start the auto scanning.
Result:
◆ The PLEASE WAIT indication flashes on the
television screen.
◆ The first frequency band is scanned and the first
station found is displayed and stored.
◆ The DVD-VCR then searches for the second station
and so on.
◆ When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
PLEASE WAIT
2%
I--------------------I
RETURN
➢
8
➢
20
GB
You do not need to preset the stations manually if you
have already set them automatically.
1
Press the SETUP button on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
INSTALLATION option.
3
Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
4
MAIN MENU
Press the corresponding œ or ❷ buttons, until the MANUAL SET
INSTALLATION
UP option is selected.
5
Press the ENTER button to select a MANUAL SET UP option.
Result:
The TV STATION TABLE menu is displayed.
6
Press the œ or ❷ buttons to select a programme number as
required.
7
Press the ❿ button to preset the station.
Result:
The MANUAL TUNING menu is displayed.
8
Press the ➛ or ❿ buttons to start scanning.
The frequency band is scanned and the first station
Result:
found is displayed.
9
Press the ❷ button, until the DECODER is selected.
10
Press the ❿ button to activate or deactivate use of the decoder
for the TV station, if necessary.
11
Press the œ or ❷ buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
12
To change the programme’s name, press the ❿button.
The first letter of the name flashes.
Result:
13
To...
Then...
Select a character
in the name
Press the œ or ❷ button until the
required character is displayed
(letters, numbers or “-” character).
Move to the next or
previous character
Press the ❿ or ➛ buttons
respectively.
14
If you...
Then...
Wish to store the
station displayed
◆
◆
The number of stations automatically stored by the DVDVCR depends on the number of stations that it has found.
◆
Press the œ or ❷buttons until the MFT
is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press ENTER to store the station
RETURN
œ❷➛❿
Do not wish to
store the station
displayed
◆
◆
◆
Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
16
On completion, press the RETURN button three times to exit the
menu.
:K
:CH36
œ❷ENTER
RETURN
TV STATION TABLE
PR
1
2
3
4
5
œ
❷
CH
NAME
DEC
❿ SWAPPING:ENTER
RETURN
DELETE:CLEAR
MANUAL TUNING
PR
CH
MFT
DECODER
NAME
:
:
:
:
:
œ❷➛ ❿
1
--OFF
----
MEMORY:ENTER
Press the œ or ❷ buttons until the CH
is selected.
Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
Go back to the beginning of Step 14
15
ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
RETURN
If you wish to cancel the auto scanning before the end, press the
RETURN button three times to exit the menu.
◆ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 22).
VCR
Presetting the Stations Manually
21
VCR
Clearing a Preset Station
VCR
Changing the Preset Station Table
GB
GB
If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
MAIN MENU
you can cancel it.
1
INSTALLATION
RETURN
œ❷➛❿
ENTER
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
INSTALLATION option.
3
Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
4
:K
:CH36
TV STATION TABLE
PR
1
2
3
4
5
œ
❷
CH
003
NAME
---
DEC
OFF
❿ SWAPPING:ENTER
RETURN
Press the SETUP button on the remote control.
2
Press the corresponding
INSTALLATION option.
3
Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
Press the corresponding œ or ❷ buttons, until the MANUAL SET
4
5
Press the ENTER button to select this option.
Result:
The TV STATION TABLE menu is displayed.
6
Press the corresponding œ or ❷ buttons, until the required preset
TV station is selected. (PR)
7
Press the CLEAR button.
œ,❷
or ➛, ❿ buttons to select the
INSTALLATION
RETURN
œ❷➛❿
ENTER
Press the corresponding œ or ❷ buttons, until the MANUAL SET
UP option is selected.
INSTALLATION
5
Press the ENTER button to select this option.
Result:
The TV STATION TABLE menu is displayed.
6
Press the corresponding œ or ❷ buttons, until the required preset
TV programme is selected.
Result:
The selected station is displayed at the same time on
the television screen.
UP option is selected.
œ❷ENTER
RETURN
MAIN MENU
1
Press the SETUP button on the remote control.
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
7
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
œ❷ENTER
RETURN
To change the programme number assigned to a station press the
ENTER button on the remote control (For example; To move a TV
station in programme 1 to programme 3).
8
Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
8
You can modify this station by repeating the same procedure from
Step 6 onwards.
9
On completion, press the RETURN button three times to exit the
menu.
9
On completion, press the RETUTN button three times to exit the
menu.
:K
:CH36
TV STATION TABLE
PR
1
2
3
4
5
œ
❷
CH
003
NAME
---
DEC
OFF
❿ SWAPPING:ENTER
RETURN
DELETE:CLEAR
DELETE:CLEAR
TV STATION TABLE
PR
1
2
3
4
5
œ
❷
CH
003
NAME
DEC
---
OFF
❿ SWAPPING:ENTER
RETURN
22
DELETE:CLEAR
23
VCR
Selecting the RF OUT Sound Mode (B/G-D/K)
GB
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
MAIN MENU
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
œ❷➛❿
ENTER
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
INSTALLATION option.
3
Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
4
Press the œ or ❷ buttons, until the TV SYSTEM option is
selected.
5
Press the ➛ or ❿ button to select G or K.
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
:K
:CH36
K
G
œ❷➛❿
RETURN
6
➢
:G
:CH36
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
USER SET option.
3
Press the ENTER button to select this option.
Result:
The USER SET menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the COLOUR
SYSTEM option is selected.
5
Press the ❿ button to select AUTO ➝ PAL ➝ MESECAM ➝
B/W.
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6
On completion, press RETURN twice to exit the menu.
MAIN MENU
USER SET
RETURN
œ❷➛❿
Setting the DVD-VCR Output Channel
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
MAIN MENU
1
INSTALLATION
œ❷➛❿
ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
:K
:CH36
RETURN
➛❿œ❷
CH21
24
or ➛, ❿ buttons to select the
2
Press the corresponding
INSTALLATION option.
3
Press the ENTER button to select this option.
Result:
The INSTALLATION menu is displayed.
œ,❷
4
Press the
selected.
5
Select the required output channel (CH21~CH69) by pressing the
➛ or ❿ buttons.
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 14).
CH36
CH69
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
œ
RETURN
:AUTO
:ON
:ON
:OFF
:OFF
:RCA
VCR
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
USER SET option.
3
Press the ENTER button to select this option.
Result:
The USER SET menu is displayed.
4
Press the corresponding œ or
is selected.
5
To...
Press ➛ or ❿, until...
Mono mode
OFF is displayed.
❷
MAIN MENU
USER SET
RETURN
œ❷➛❿
USER SET
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
SHOWVIEW EXTEND
AUX AUDIO
RETURN
:AUTO
:ON
:ON
:OFF
:OFF
:RCA
œ❷➛❿
ON is displayed.
ON: Normally set at this position.
6
ENTER
buttons, until the NICAM option
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode
AUTO
PAL
MESECAM
B/W
œ❷➛❿
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 37.
or ❷ buttons, until the VCR OUTPUT CH option is
ENTER
USER SET
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
SHOWVIEW EXTEND
AUX AUDIO
NICAM
VCR
RETURN
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
K
Only Turkey
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on this DVDVCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1
G
œ❷➛❿
RETURN
◆
◆
On completion, press RETURN to exit the menu.
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM
VCR OUTPUT CH
GB
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
INSTALLATION
RETURN
VCR
Selecting the Colour Mode
On completion, press RETURN twice to exit the menu.
25
ON
OFF
VCR
Intelligent Picture Control
VCR
ShowView EXTEND
GB
GB
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
MAIN MENU
œ❷➛❿
ENTER
1
Press the SETUP button on the remote control.
3
Press the ENTER button to select this option.
Result:
The USER SET menu is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
USER SET option.
4
Press the corresponding œ or ❷ buttons, until the IPC option is
selected.
3
5
Press the ❿button to select the IPC (intelligent picture control)
option.
Press the ENTER button to select this option.
Result:
The USER SET menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the
SHOWVIEW EXTEND option is selected.
5
Press ➛ or ❿ buttons to set the ShowView EXTEND time by
increments of 10 minutes.
6
To turn off, press ➛ or ❿ buttons repeatedly until OFF shows.
➢
RETURN
:AUTO
:ON
:ON
:OFF
:OFF
:RCA
ON
6
To adjust the sharpness manually, press the ❷ button to turn the
IPC mode OFF.
7
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
OFF
œ❷➛❿
➢
8
VCR
œ❷➛❿
RETURN
On completion, press the RETURN button again.
œ❷➛❿
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
USER SET option.
3
Press the ENTER button to select this option.
The USER SET menu is displayed.
Result:
4
Press the corresponding œ or ❷ buttons, until the AUTO POWER
OFF option is selected.
5
Press the ❿ button, until you select the time of Auto Power off
interval.
ENTER
USER SET
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
SHOWVIEW EXTEND
AUX AUDIO
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
:AUTO
:ON
:ON
:OFF
:OFF
:RCA
OFF
2HOUR
3HOUR
OFF
2HOUR
3HOUR
œ❷➛❿
6
26
:AUTO
:ON
:ON
:OFF
:OFF
:RCA
➛❿œ❷
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
1
ENTER
USER SET
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
SHOWVIEW EXTEND
AUX AUDIO
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
USER SET
RETURN
USER SET
RETURN
Auto Power Off
MAIN MENU
RETURN
When intelligent picture control mode is ON, the sharpness
of the image is adjusted automatically.
MAIN MENU
Only use if PDC is not available or set to OFF.
Press the corresponding œ, ❷or ➛, ❿ buttons to select the
USER SET option.
USER SET
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
SHOWVIEW EXTEND
AUX AUDIO
➢
During playback, press the SETUP button on the remote control.
The MAIN MENU is displayed.
Result:
2
USER SET
RETURN
To prevent delays or over-runs the VCR has a function called
ShowView EXTEND allowing you to extend the recording time by
up to 60 minutes.
On completion, press RETURN twice to exit the menu.
27
OFF
10
60
VCR
Selecting the Cassette Type
VCR
OSD
GB
GB
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
MAIN MENU
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
VCR FUNCTION SETUP option.
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, MAIN MENU and
Timer functions, which cannot be hidden).
1
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
VCR FUNCTION SETUP option.
3
Press the ENTER button to select this option.
Result:
The VCR FUNCTION SETUP menu is displayed.
VCR FUNCTION SETUP
RETURN
œ❷➛❿
ENTER
VCR FUNCTION SETUP
Tape Select
Repeat Play
OSD
➛❿
E180
Off
On
3
Press the ENTER button to select this option.
4
Press the corresponding
SELECT option is selected.
5
Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180
E240
E260
E300
E180
E300
6
œ
or ❷ buttons, until the TAPE
E240
E260
Press RETURN twice to exit the menu.
4
Press the corresponding
selected.
5
To...
Press ➛ or ❿, until...
Display on-screen information
ON is displayed.
Hide on-screen information
OFF is displayed.
œ❷
RETURN
6
VCR
œ
or ❷ buttons, until the OSD option is
MAIN MENU
VCR FUNCTION SETUP
œ❷➛❿
RETURN
ENTER
VCR FUNCTION SETUP
Tape Select
Repeat Play
OSD
RETURN
➛❿
E180
Off
On
On
Off
œ❷
On completion, press RETURN twice to exit the menu.
Auto Repeat Play
VCR
Selecting the Recording Speed
You can set repeat play to repeat the tape continuously from
beginning to end.
You can record a cassette at two different speeds:
MAIN MENU
1
2
VCR FUNCTION SETUP
RETURN
œ❷➛❿
RETURN
➛❿
3
Press the ENTER button to select this option.
Result:
The VCR FUNCTION SETUP menu is displayed.
4
Press the corresponding
Play option is selected.
E180
Off
On
Off
On
5
To...
Press ➛ or ❿, until...
Repeat play
ON is displayed.
Do not wish to repeat play
OFF is displayed.
œ❷
6
28
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the
VCR FUNCTION SETUP option.
ENTER
VCR FUNCTION SETUP
Tape Select
Repeat Play
OSD
Press SETUP on the remote control.
Result:
The MAIN MENU is displayed.
œ
or
❷
◆ SP (Standard Play)
◆ LP (Long Play)
In Long Play modes:
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
To record a cassette...
Press the SPEED button on the
remote control, until...
In standard play mode
In long play mode
SP is displayed.
LP is displayed.
buttons, until the Repeat
Type
Recording Time (in SP)
E-180
180 mins. or 3 hours
E-240
240 mins. or 4 hours
E-260
260 mins. or
4 hours and 20 mins.
E-300
300 mins. or 5 hours
On completion, press RETURN twice to exit the menu.
29
VCR
Protecting a Recorded Cassette
GB
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
VCR
1
If you wish to protect a cassette, break off the tab using a small
screwdriver.
2
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
Recording a Programme Immediately
4
Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 19 and 20.
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
4
3
6
4
5
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The DVD-VCR is switched on automatically.
Select:
◆
The station to be recorded using the PROG (œ or ❷) buttons
or
GB
This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3
4
7
6
Hold REC ( ●) down for a while to start recording.
The record indicator appears on the television and DVDResult:
VCR display. An index is recorded on the tape (see
page 39).
7
➢
30
To stop recording, press ■ once.
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The DVD-VCR is switched on automatically.
4
Select:
◆
The station to be recorded using the PROG (œ or ❷) buttons
or
4
The AV1, AV2 or AUX source using the INPUT button for a
satellite tuner or external video source
The channel number is displayed and the programme
Result:
can be seen on the television.
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 29).
6
Hold the REC button (●) down for a while to start recording.
The record indicator appears on the television screen
Result:
and DVD-VCR display. An index is recorded on the
tape (see page 39).
7
The AV1, AV2 or AUX source using the INPUT button for a
satellite tuner or external video source
Result:
The station number is displayed and the programme
can be seen on the television.
Select the recording speed by pressing the SPEED button as
many times as required (see page 29).
3
◆
◆
5
VCR
Recording a Programme with Automatic Stop
8
Press the REC button ( ●) several times to increase the
recording time in:
◆
30-minute intervals up to four hours
◆
1-hour intervals up to nine hours (LP)
The length is displayed on the television displays. The
Result:
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically.
6
5
LENGTH 2:30
SET LENGTH :
PRESS REC ●
If you wish to cancel the recording before the end, press
STANDBY/ON.
☛
If the end of the tape is reached while recording:
◆ The recording stops
◆ If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
◆ If you reach the end of the tape while recording, the
cassette rewinds automatically.
31
VCR
Using the ShowView Feature
VCR
Modifying ShowView Programming
GB
GB
Before presetting your DVD-VCR:
◆ Switch on both the television and your DVD-VCR
If you wish to correct the programme displayed or modify certain elements, such as the recording speed,
you can do so before you press SETUP a second time to confirm.
◆ Check that the date and time are correct
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
If you wish to...
Then...
Select an input source other
than the tuner (AV1, AV2 )
◆ Press the ➛ or ❿ buttons, until the PR selection flashes.
1
1
☛
TIMER METHOD
STANDARD
SHOWVIEW
2
RETURN
œ
❷
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
➢
ENTER
SHOWVIEW
CODE ---------
3
CORRECT:➛
ENTER
1/JAN TUE 12:09
PR DAY START→STOP V/P
-- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- -- ---- --:--→--:---- œ
❷
SET:❿
RETURN
DELETE:CLEAR
5
If you wish to correct the ShowView code that you are
entering:
◆ Press the ➛ button until the digit to be corrected is
cleared
◆ Enter the correct digit
Press the ENTER button.
The information concerning the programme is displayed.
Result:
☛
CODE:0-9
RETURN
If all six programmes have been set, the message TIMER
IS FULL is displayed. Refer to page 35 if you wish to
cancel a preset recording.
When using the ShowView function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the œ or ❷ buttons. Refer to the following page if:
◆ The programme number or times flash
◆ You wish to modify the programme
4
If the programme and times are correct, press the RETURN button.
5
Press the STANDBY/ON button to activate the timer.
6
Refer to page 35 if you wish to:
◆ Check that your DVD-VCR has been programmed correctly
◆ Cancel a preset recording
☛
The numbers next to each TV programme listing are
SHOWVIEW code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the ShowView code for the programme
you wish to record.
◆ Press the INPUT button one or more times to change the
input source selection.
The programme number is replaced by:
Result:
To enter a ShowView, press the TIMER button.
Press the ❷and ENTER buttons to select SHOWVIEW.
A message is displayed to allow you to enter the
Result:
ShowView code.
• The AV1, AV2 source using the INPUT button for
➢
a satellite tuner or external video source
The input source must be selected before changing any
other value.
Record a programme every day
(Monday to Sunday) at the same time
◆ Press the ➛ or ❿ buttons, until the DAY selection flashes.
Record a programme every week
on the same day and at the same time
◆ Press the ➛ or ❿ buttons, until the DAY selection flashes.
◆ Press the œ or ❷ buttons, until the DLY (Daily) value is
displayed.
◆ Press the œ or ❷ buttons, until the W- (Week) value is
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Extend the recording time
◆ Press the ➛ or ❿ buttons, until the STOP selection flashes.
◆ Press the œ or ❷ buttons to increase or decrease the stop
time.
Select the recording speed
◆ Press the ➛ or ❿ buttons, until the recording speed selection
flashes.
◆ Press the œ or ❷ buttons until the correct indication is
displayed:
• AUTO (Auto Tape Speed Select) : see page 35
• SP (Standard Play)
• LP (Long Play)
Select the PDC recording
◆ Press the ➛ or ❿ buttons, until the V/P selection flashes.
◆ Press the œ or ❷ buttons until the “ON” indication is displayed.
☛
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC ON
(by selecting “ON” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
™ ShowView is a trademark of Gemstar Development Corporation. The ShowView system is
manufactured under licence from Gemstar Development Corporation.
32
33
VCR
Using the Timer Programming Feature
VCR
Checking a Preset Recording
GB
GB
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛
TIMER METHOD
STANDARD
SHOWVIEW
RETURN
œ
❷
17
◆ If you have forgotten which programmes will be
recorded
Before presetting a recording, check that the date and
time are correct.
Insert the cassette and press TIMER on the remote control.
The timer selection is displayed.
Result:
1
Press TIMER on the remote control.
Result:
The timer selection is displayed.
2
Press the ENTER button to select STANDARD option.
The TIMER PROGRAMMING menu is displayed.
Result:
2
Press the ENTER button to select STANDARD option.
Result:
The TIMER PROGRAMMING menu is displayed.
3
Press ❿to select the input source.
4
Select the required station by pressing the œ, ❷ buttons or
INPUT to select the AV1, AV2 input sources.
5
Press ❿ to select the recording day.
6
Select the required day by pressing the œ or ❷ buttons.
7
Press ❿ to select the recording start time.
8
Select the required hour value by pressing the œ or ❷ buttons.
9
Press ❿ to select the minutes.
10
Select the required minute value by pressing the œ or ❷ buttons.
11
Press ❿ to select the recording end time.
12
Select the required recording end time by pressing the œ or ❷
buttons, following the same procedure as when selecting the
recording start time.
13
Press ❿ to select the recording speed.
14
Press the œ or ❷ buttons to select the SP (Standard Play), LP
(Long Play), AUTO (Auto Tape Speed Select) recording speeds.
15
Press the œ or ❷ buttons to toggle between the VPS or PDC
mode (marked ON) and the non-VPS/PDC mode (marked -).
16
17
When you have finished, press the RETURN button.
Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
➢
34
◆ When you have finished presetting the DVD-VCR
1
ENTER
1/JAN TUE 12:09
DAY START→STOP V/P
SA 9 12:00→12:50SP ---- --:--→--:---- ---- --:--→--:---- ---- --:--→--:---- ---- --:--→--:---- ---- --:--→--:---- œ
❷ ➛❿
SET:❿
RETURN
DELETE:CLEAR
PR
1
------
You can check your preset recordings:
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
3
Press the œ or ❷ buttons to select the required programme.
4
Press the ➛ or ❿ buttons to select and change any values as
required. For more details, refer to the previous page.
5
On completion, press RETURN twice.
PR
1
-----œ
❷
1/JAN TUE 12:09
DAY START→STOP V/P
SA 9 12:00→12:50SP ---- --:--→--:---- ---- --:--→--:---- ---- --:--→--:---- ---- --:--→--:---- ---- --:--→--:---- ➛❿
RETURN
DELETE:CLEAR
VCR
Cancelling a Preset Programme
You can cancel any programmes that are:
◆ Incorrect
◆ No longer required
1
Press TIMER on the remote control.
Result:
The timer selection is displayed.
2
Press the ENTER button to select STANDARD option.
Result:
The TIMER PROGRAMMING menu is displayed.
PR
1
-----œ
❷
1/JAN TUE 12:09
DAY START→STOP V/P
SA 9 12:00→12:50SP ---- --:--→--:---- ---- --:--→--:---- ---- --:--→--:---- ---- --:--→--:---- ---- --:--→--:---- ➛❿
RETURN
3
Select the programme to be cancelled by pressing the
buttons.
4
Press the CLEAR button to cancel the selected programme.
All the recording information is deleted and the broadResult:
cast will not be recorded.
5
On completion, press RETURN twice.
œ
DELETE:CLEAR
or ❷
4
35
VCR
Playing a Cassette
GB
This function allows you to play back any pre-recorded cassette.
2
3
1
Switch on both the television and your DVD-VCR.
2
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ❿ll.
Otherwise, the cassette is played automatically.
➢
3
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
To...
Then press...
Stop the playback
■ (STOP).
3
Eject the cassette
VCR
(EJECT).
Adjusting Picture Alignment Automatically
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the ATR button.
Result:
◆ The tracking bar appears.
◆ The picture is automatically adjusted.
◆ The tracking bar disappears when digital auto tracking has
been completed.
VCR
Adjusting Picture Alignment Manually
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRK (œ or ❷) buttons until the picture is clear
and stable.
Result:
◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when you release the button.
36
VCR
Selecting the Audio Output Mode
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available
In tape playback mode.
Option
GB
Description
L
Used to listen to the sound on the left Hi-Fi channel.
R
Used to listen to the sound on the right Hi-Fi channel.
MIX
Used to listen to the mixed sound of the Hi-Fi and normal
channels.
MONO
Used to listen to the sound on the normal mono channel.
LR
Used to listen to Hi-Fi stereo sound on the left and right
channels.
L
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
LR
➢
R
MIX
MONO
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
VCR
Playing a Cassette in Slow Motion
You can play a cassette in slow motion.
➢
1
No sound is heard when playing back a cassette in slow
motion.
Press:
◆
◆
❿ll to start playing the cassette
❿ll button one more time to make STILL mode.
◆
❿❿ to start SLOW mode.
❿❿ or ➛➛ button as many times as required to decrease or
◆
increase the speed respectively
To return to the normal speed, press the ❿ll button twice.
◆
1
1
2
2
When playing back in slow motion, picture interference may occur.
Press the TRK (œ or ❷) buttons to minimize this effect.
☛
When you have been using the Slow Motion function for
more than about five minutes, the DVD-VCR will
automatically play to protect the:
2
◆ Cassette
◆ Video heads
37
VCR
Playing a Sequence Frame by Frame
VCR
Searching for a Specific Sequence
GB
GB
You can:
Each time you record a cassette on this DVD-VCR, an “index” is
automatically marked on the tape when recording starts.
◆ Stop the cassette at a given frame (image)
◆ Advance one frame at a time
➢
1
No sound is heard when playing back frame by frame.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
◆
❿ll to start playing the cassette
❿ll to stop the tape at a given frame
◆
Turn the JOG Dial to advance frame by frame
◆
1
➞
Press:
etc.
2
To return to normal playback, press ❿ll.
2
➢
1
➢
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the
PROG/TRK buttons to minimize this effect.
Prev
Seq. being
Seq.
played
1
Next
Seq.
1
etc.
2
This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
INDEX
:
➛➛❿❿
INTRO SCAN
VCR
Playing a Sequence at Variable Speeds
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
You wish to analyze a sportsperson’s technique,
Example:
movement by movement.
The Shuttle function is available on the Remote control
➢
1
Press:
◆
◆
◆
1
1
2
REVERSE
PLAY
X9
No sound is heard when playing a sequence at variable
speeds.
❿ll during playback
Turn the SHUTTLE dial to left to play the cassette backwards
Turn the SHUTTLE dial to right to play the cassette forwards
1
To search for a specific index, press INDEX.
2
Press the ➛➛ or ❿❿ buttons depending on the direction
where your desired programme is located.
3
When an Index mark is found the DVD-VCR will playback the tape
for 5 seconds, after which it will continue searching for the next
Index mark.
4
If you want to watch the tape from a particular Index, simply press
❿II.
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the INDEX button.
1
Press the INDEX to start the Index search.
2
Press the ➛➛ or ❿❿ buttons twice more. This will take
you directly to the start of the desired programme is located.
3
These Index searches can be made forwards: (press ❿❿) or
backwards: (press ➛➛ ).
4
To cancel an Index search simply press the ❿II or ■ button.
The speed is changed as shown in the following illustration.
REVERSE
PLAY
X5
REVERSE
PLAY
X3
•••
STILL
SLOW
MOTION
X1/10
SLOW
MOTION
X1/5
PLAY
PLAY
X3
PLAY
X5
PLAY
X9
INTRO SCAN
INDEX SEARCH :
2
38
:
➛➛
➛➛
- 6
2
39
VCR
Using the Tape Counter
VCR
Connecting an RCA Audio/Video Input Cable
GB
GB
The tape counter:
◆ Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the DVD-VCR
◆ Allows you to find the beginning of a sequence easily
☛
0:00:00
2
2
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a sequence:
◆ Press DISPLAY twice to display the counter
◆ Press CLEAR when you want to set the tape counter to zero
3
When you are ready,
◆ Start playback or Recording.
◆ Press the ■ button.
◆ To fast-froward or rewind to the sequence at which the
counter was set to zero, press ➛➛ or ❿❿.
➢
Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 30).
Press DISPLAY:
◆ Once to display the current function, programme
number, recording speed, date, time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆ Four times to clear the display
40
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples: ◆ You wish to copy a video cassette with the help of a
second VCR (see page 42).
◆ You wish to play back and/or copy pictures taken
with a camcorder (see page 42).
☛
1
◆ Make sure that both the television and the VCR are
switched off before connecting the cables.
1
Connect one end of the RCA audio/video cable into the VIDEO
socket on the rear of the DVD-VCR.
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable into the AUDIO sockets
on the rear of the DVD-VCR.
➢
4
3
Take care to respect the colour coding of the left and right
channels.
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
41
VCR
Using the Assemble Edit Function
GB
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
2
5
VCR
GB
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
1
Insert the cassette to be edited in your DVD-VCR.
◆ A CD, DVD
2
Press the ❿ll button to start playback.
◆ A microphone connected to a sound system
3
When you reach the position from which you wish to start the new
recording, press the ❿ll button.
Restriction:
4
Turn the JOG Dial again as often as necessary to advance frame
by frame, until the exact recording position is located.
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
5
While the DVD-VCR is in still mode, hold the REC button ( ● )
down for a while to activate the Assemble Edit function.
Record symbol flashes in the display.
Result:
1
Connect an RCA audio cable to the appropriate output on your
sound system (cassette player for example).
6
Select the source from which you wish to record by pressing:
◆ The PROG (œ or ❷) buttons for television channels
◆ The INPUT button for the AV1, AV2 or AUX input sources
2
Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the rear of your DVD-VCR.
7
Press the ❿ll button to start recording.
3
8
When you have finished recording, press ■ .
Insert the pre-recorded cassette on which the audio track is to be
replaced, and press the ❿ll to start playback.
4
Search for the Audio Dubbing (ending) point using the ❿❿, and set
the counter to 0:00:00 by pressing DISPLAY and CLEAR.
5
Search back slightly beyond the Audio Dub start point using the ➛➛
button.
6
Press the ❿ll button.
Press the ❿ll button one more time to make STILL mode.
7
Press A.DUB.
Result:
Your DVD-VCR is now in the Audio dubbing Still
mode.
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
8
On the sound system, locate the point on the cassette at which
you wish to start playback.
Example: The track that you wish to record on the cassette.
1
Connect the DVD-VCR, from which the cassette is to be copied, to
the appropriate SCART audio and video input connectors on the
rear of your DVD-VCR, as indicated on page 11.
9
2
Insert a blank cassette in your DVD-VCR.
When you are ready:
◆
Start playback on the sound system
◆
Press the REC on the remote control.
The soundtrack is replaced on the pre-recorded cassette.
Result:
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
10
The audio dubbing will finish when the counter reaches 0:00:00.
4
Press the INPUT button to select the appropriate input on
your DVD-VCR:
◆ AV1, AV2 for the SCART input
◆ AUX for the RCA input
4
Recording from Another VCR or Camcorder
VCR
Audio Dubbing a Pre-recorded Cassette
◆ A cassette player
2
7
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
☛
2
7
6
42
5
Start playing back the cassette to be copied.
6
Hold REC ( ●) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press ■ on both VCR and
DVD-VCR.
➢
A.DUB
-0:05:23
The new sound will be recorded on the normal sound
track of the tape, and the original sound will remain on
the Hi-Fi sound track.
To hear the new sound and original sound mixed
together, press the Audio button on the remote control
until the MIX option is displayed (see page 38).
43
VCR
Using the TV Buttons on the Remote Control
VCR
SQPB (Super VHS Quasi Playback)
GB
GB
Your DVD-VCR remote control will work with Samsung televisions
and compatible brands.
This function is for playback of Super VHS format tapes only, not
for recording.
To determine whether your television is compatible, follow the instructions
below.
1
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
2
2
Brand
Codes
Brand
Codes
SAMSUNG
AKAI
GRUNDIG
LOEWE
PANASONIC
01 to 06
09, 23
09, 17, 21
02
08, 23 to 27
PHILIPS
SABA
SONY
THOMSON
TOSHIBA
02, 20, 22
13, 14, 22 to 24
15, 16
13, 14, 24
07, 16 to 19, 21
Result:
➢
4
☛
3
4
1
Inset the SVHS format tape that you want to see.
2
Press PLAY (❿ll ) to start playing the cassette.
3
Press SVHS button to start SQPB.
☛
3
If the SQPB is on during normal playback, the video
output is distorted.
If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
When you change the batteries in the remote control, you
must reprogramme the code, following the same procedure.
You can then control the television using the following buttons.
Button
Function
TV STANDBY/ON ➀ Used to switch the television on and off.
5
5
TV or VCR ➁
Used to switch between the TV and VCR modes.
TV INPUT ➂
Used to select an external source.
TV VOL + or –
PROG/TRK
(œ or ❷)
6
MUTE
➅
➢
44
➄
➃
Used to adjust the volume of the television.
Used to select the required programme.
Used to mute the volume of the television.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
45
DVD
Playing a Disc
DVD
Using the Search & Skip Functions
GB
GB
Before Playback :
◆ Turn on a TV and press the TV/VIDEO button to select
video mode.
During playback, you can search quickly through a chapter or track
or use the skip function to jump to the next selection.
1
1
1
Press the OPEN/CLOSE button.
2
Place a disc gently into the tray with the disc’s label facing up.
3
Press the ❿ll (PLAY/STILL) button or OPEN/CLOSE button to
close the disc tray.
☛ When
RESUME function (DVD) :
you stop disc play, the player remembers where you
➢
3
➢
1
46
◆ If the player is left for 5 minutes in still mode, it will
stop.
◆
This icon indicates an invalid button press.
Before using the DVD operation, press the DVD button
on the remote control to watch and select DVD.
1
Stopping Playback. Press the STOP button during playback.
2
Removing Disc. Press the OPEN/CLOSE button.
3
Stilling Playback.
Press the ❿ll (PLAY/STILL) button on the remote during
playback.
◆ Screen stops, no sound.
◆ To resume again, press ❿ll (PLAY/STILL) button once
again.
3
5
stopped, so when you press PLAY again, it will pick up
where you left off (unless the disc is removed, the STOP
button is pressed twice or the player is unplugged.).
4
Step Motion Playback (Except CD)
Turn the JOG dial the remote during stilling playback.
◆ Each time the button is pressed, a new frame will appear.
◆ No sound is heard during STEP mode.
◆ Press ❿ll (PLAY/STILL) to resume normal playback.
(You can only perform step motion playback in the forward
direction.)
5
Slow Motion Playback (Except CD)
Press the ❿❿ button on the remote during STILL or STEP mode.
◆ By pressing the ❿❿ button, you can select slow motion
playback for 1/2, 1/4 or 1/8 of normal speed.
◆ No sound is heard during slow mode.
◆ Press ❿ll (PLAY/STILL) to resume normal playback.
◆ When playing, the reverse slow motion playback will not
work.
2
During playback, press the ❿❿ or ➛➛ button on the remote.
◆ Press the ❿❿ or ➛➛ button on the remote and press again to
search at a faster speed(2X/4X/8X/16X/32X/128X/normal
speed, in order) on the DVD.
◆ Press the ❿❿ or ➛➛ button on the remote and press again to
search at a faster speed(4X/8X/normal speed in order) on
VCD and CD.
◆ To return to normal speed playback, press the ❿ll
(PLAY/STILL) button.
During playback, press the ❿❿I (NEXT SKIP) or I➛➛ (BACK SKIP)
button.
◆ When playing a DVD, if you press the ❿❿I (NEXT SKIP)
button, it moves to next chapter. If you press the I➛➛ (BACK
SKIP) button, it moves to the beginning of the chapter. One
more press makes it move to the beginning of the previous
chapter.
◆ When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1 or
a CD, if you press the ❿❿I (NEXT SKIP) button, it moves to
next track. If you press the I➛➛ (BACK SKIP) button, it moves
to the the beginning of the track. One more press makes it
move to the beginning of the previous track.
◆ If a track exceeds 15 minutes when playing a VCD and you
press the ❿❿I (NEXT SKIP) button, it moves forward 5
minutes. If you press the BACK SKIP button, it moves
backward 5 minutes.
➢
1
1
2
2
◆ When in search mode (8X/16X/32X/128X) on a DVD
or high-speed playback on a VCD, no sound will be
heard.
◆ Audio may not be heard when a disc is in 2X playback
mode.
47
DVD
Choosing a Connection
DVD
Using the Setup Menu
GB
GB
The following show examples of connections commonly used to connect the DVD-VCR with a TV
and other components. It is only available for DVD. The VCR out can not watch by this connection.
Connection to an Television
The Setup menu lets you customize your DVD-VCR by allowing
you to select various language preferences, set up a parental level,
even adjust the player to the type of television screen you have.
MAIN MENU
1
With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
3
Television
DVD SETUP
RETURN
œ❷➛❿
• Disc Menu : Setup of the Menu Language
Use the Menu preference menu to select the
language you want a DVD’s disc menu to be
displayed in.
• Audio : Setup of the Audio Language
Use the Audio preference menu to select the soundtrack
language.
• Subtitle : Setup of the Subtitle Language
DVD SETUP
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
English
English
Automatic
Unlocked
œ❷ENTER
RETURN
Use the Subtitle preference menu to select the
language the disc’s subtitles are to be displayed in.
• Parental : Setup of the Parental Level
Allows users to set the level necessary to prevent
children from viewing unsuitable movies such as
those with violence, adult subject matter, etc.
• Audio Options : Setup of the Audio Options
• Display Options: Setup of the Display Options use to select
which type of screen you want to watch and
several display options.
4
Use the œ or ❷ buttons on the remote to access the different
features.
5
Press the ENTER button to access the sub features.
• To make the setup screen disappear after setting up, press the
SETUP button again.
S-Video
Jack
48
ENTER
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
➢ Depending
on the disc, some Setup Menu selections may
not work.
49
DVD
Using the Disc Menu Language
DVD
Setting Up the Audio Language Features
GB
MAIN MENU
This function changes the text language only on the disc menu
screens.
1
With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
2
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
3
3
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
4
Press the œ or ❷ buttons to move to Audio.
4
Use the œ or ❷ buttons to select Disc Menu.
5
Press the ENTER button.
5
Press the ENTER button.
6
6
Use the œ or ❷ buttons to select ‘English’.
- Select “Others” if the language you want is not listed.
7
Press the ENTER button.
- English is selected and the screen returns to SETUP MENU.
MAIN MENU
1
DVD SETUP
RETURN
œ❷➛❿
ENTER
DVD SETUP
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
English
English
Automatic
Unlocked
œ❷ENTER
RETURN
DISC MENU LANGUAGE
Using the Audio Language:
DVD SETUP
RETURN
DVD SETUP
Press the œ or ❷ buttons to select ‘English’ .
- Select “Original” if you want the default soundtrack language to be
the original language the disc is recorded in.
- Select “Others” if the language you want is not listed.
7
➢ How
to make the SETUP MENU disappear or return to menu
screen during setup ; Press RETURN button.
Press the ENTER button.
- English is selected and the screen returns to SETUP MENU.
English
English
Automatic
Unlocked
RETURN
œ❷ENTER
AUDIO LANGUAGE
❿ English
Français
Deutsch
Español
Italiano
Nederlands
Original
Others
Français
Deutsch
Español
Italiano
Nederlands
Others
œ❷ENTER
RETURN
œ❷ENTER
DVD
Using the Subtitle Language
1
With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
DVD SETUP
3
Press the ENTER button to select this option.
Result:
The SETUP MENU menu is displayed.
4
Use the œ or ❷ buttons to select Subtitle.
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
5
Press the ENTER button.
RETURN
6
7
English
English
Automatic
Unlocked
œ❷ENTER
Use the œ or ❷ buttons to select ‘English’.
- Select “Automatic” if you want the subtitle language to be the same as the
language selected as the audio preference.
- Select “Others” if the language you want is not listed. Some discs
may not contain the language you select asyour initial language;
in that case the disc will use itsoriginal language setting.
Press the ENTER button.
- English is selected and the screen returns to SETUP MENU.
SUBTITLE LANGUAGE
❿ Automatic
English
Français
Deutsch
Español
Italiano
Nederlands
Others
RETURN
œ❷ENTER
➢ • original
If the selected language is not recorded on the disc, the
pre-recorded language is selected.
• How to make the SETUP MENU disappear or return to
menu screen during set up; Press RETURN button.
50
ENTER
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
❿ English
RETURN
œ❷➛❿
51
GB
DVD
Setting Up the Parental Control
DVD
Setting Up the Audio Options
GB
GB
MAIN MENU
The Parental Control function works in conjunction with DVDs that
have been assigned a rating - which helps you control the types of
DVDs that your family watches. There are up to 8 rating levels on a
disc.
DVD SETUP
œ❷➛❿
RETURN
ENTER
DVD SETUP
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
English
English
Automatic
Unlocked
œ❷ENTER
RETURN
➛❿ No
œ❷
RETURN
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
3
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
4
3
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
Use the œor ❷ buttons to select Audio Options. Then press the
ENTER button.
5
4
Use œ or ❷ to select Parental. Press ENTER. The Parental
Control screen appears.
Use the œ or ❷ buttons to select the desired item. Then press
the ➛ or ❿ buttons.
• Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
• Center SPK Time Delay (See Page 69)
• Surround SPK Time Delay (See Page 69)
• Dolby Pro Logic II (See Page 71)
5
Use ➛ or ❿to select Yes if you want to use a password. Press
ENTER. The Enter Password screen appears.
6
Enter your password. The Re-enter Password screen appears to
confirm the password. Enter your password again. The Parental
Control screen appears.
7
About the Rating Level :
- The Rating Level will work only when Use Password is set to
Yes. To unlock the player, use ➛ or ❿ to select No. Use œ or ❷
to select Rating level. Press ENTER.
ENTER
- Use œ or ❷ to select the level(e.g. Level 6) and press ENTER.
Discs that contain Level 7 will now not play.
- To cancel the rating level, use ➛ or ❿ to select No in Use
Password.
CREATE PASSWORD
8
Enter Password
____
2
1
PARENTAL CONTROL
Use Password
1 With the unit in Stop mode, press the SETUP button on the
remote.
Result:
The MAIN MENU is displayed.
MAIN MENU
DVD SETUP
RETURN
œ❷➛❿
DVD SETUP
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
English
English
Automatic
Unlocked
œ❷ENTER
RETURN
➢
• How to make the SETUP MENU disappear or return
to menu screen during set up: Press RETURN button.
AUDIO OPTIONS
Dynamic Compression
➛❿
Center SPK Time Delay
Surround SPK Time Delay
Dolby Pro Logic II
RETURN
œ❷
About the Change Password:
- Use œ or ❷ to select Change Password. The Change
Password screen appears.
RETURN
-Enter your new password. Re-enter the new password again.
PRESS 0-9
PARENTAL CONTROL
Use Password ➛❿ Yes
Rating Level
8
Change Password
œ❷
RETURN
➢
• How to make the SETUP MENU disappear or return to
menu screen during set up; Press RETURN button.
• If you have forgotten your password, see Forget
Password in the Troubleshooting Guide.
ENTER
RATING LEVEL
Level 8 Adult
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
œ❷
RETURN
52
ENTER
ENTER
53
Off
0ms
0ms
On
On
Off
DVD
Setting Up the Display Options
DVD
S-Video Connections (for DVD)
GB
GB
1
With the unit in Stop mode, press the SETUP button on the remote.
Result:
The MAIN MENU is displayed.
2
Press the corresponding œ, ❷ or ➛, ❿ buttons to select the DVD
option.
3
Press the ENTER button to select this option.
Result:
The DVD SETUP menu is displayed.
4
Use the œor ❷ buttons to select Display Options.
Then press the ENTER button.
MAIN MENU
DVD SETUP
œ❷➛❿
RETURN
ENTER
5
English
English
Automatic
Unlocked
RETURN
4:3 L-Box
Low
PAL 60Hz
RGB
Connect S-Video Out to TV
Connect an S-Video cable from the S-Video Out on the back panel
of the DVD-VCR to the S-Video Input on your television.
To S-Video Input on Your TV
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
4:3 Letter Box : Select when you want to see the total 16:9
ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars
will appear at the top and bottom of the screen.
4:3 Pan-Scan : Select this for conventional size TVs when you
want to see the central portion of the 16:9
screen. (Extreme left and right side of movie
picture will be cut off.)
16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
DISPLAY OPTIONS
TV Aspect
Black Level
NTSC Disc Output ➛❿
DVD Out
1
• TV Aspect
œ❷ENTER
RETURN
1
Use the œor ❷ buttons to select the desired item.
Then press the ➛ or ❿ buttons or then press the ENTER button.
Use the œ or ❷ buttons to select the desired item.
Then press the ENTER button.
DVD SETUP
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
The S-Video is only for the DVD player. The tuner and VCR will
still be viewed through the RF or line inputs.
You must follow the “DVD Out” instructions on page 54 to
activate your alternative (S-Video) video selection.
If your television is equipped with S-Video input, you can enjoy
superior video quality when watching DVDs with your DVD-VCR.
PAL 60Hz
NTSC
œ❷
• Black Level
Adjusts the brightness of the screen.
DISPLAY OPTIONS
TV Aspect
Black Level
NTSC Disc Output
DVD Out
RETURN
4:3 L-Box
Low
PAL 60Hz
RGB
• NTSC Disc Output
RGB
S-VIideo
VIDEO
Depending on a disc, you can play a NTSC DVD disc by
PAL 60Hz or NTSC mode.
• DVD Out
RGB : Sends RGB signal to the Scart JACK .
S-Video : Sends S-VIDEO signal to the S-JACK.
Video : Sends COMPOSITE VIDEO signal to the Scart JACK.
œ❷
➢
54
• How to make the SETUP MENU disappear or return to
menu screen during set up: Press the RETURN button.
55
DVD
Special Playback Features
During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the ❿ll
(Play/Still) button.
GB
DVD
Using the Display Function (DVD/VCD/CD)
GB
When Playing a DVD
DVD
1
1
Still
Press the ❿ll (Play/Still) button on the remote control during
playback.
1
- Current title, chapter number, elapsed time, audio and
subtitle will be displayed.
• Use the NUMBER buttons to enter a different title, then
press the ENTER button.
• Use the ➛, ❿ or NUMBER buttons to enter a chapter
number, then press the ENTER button.
• To enter the time from which you want to start, use the œ or
❷ buttons to select, then use the NUMBER buttons to enter
the time. Then press the ENTER button.
• Use the ➛ or ❿ buttons to change the values of the
current audio and subtitle.
• To make the screen disappear, press the DISPLAY button
again.
• The picture will still and the audio will mute.
• To resume playback, press the ❿ll (Play/Still) button.
• If the player is left in Still mode for 5 minutes, it will stop
automatically.
2
Frame Advance (Step)
While in Still mode, press the F.ADV/STEP button on the remote
control to advance one frame at a time.
3
• Audio is muted during Frame Advance mode.
• Press ❿ll (Play/Still) to resume normal playback.
NOTE: Frame Advance operates only in the forward direction.
3
3
During play, press the DISPLAY button on the remote.
Skip Forward/Back
➛❿
VCD
➛❿
While a CD or DVD disc is in Play mode, press the Skip
Forward/Back (❿❿l / l➛➛) buttons on the remote control or front
panel to jump forward and backward through disc chapters/tracks.
• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current chapter/track.
• Press Skip Back again to jump to the beginning of the previous
chapter/track.
Search Forward/Back
While a disc is in Play mode, press and hold the Forward/Back
(❿❿ /➛➛) buttons on the remote control or front panel to visually
search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed.
Press ❿ll (Play/Still) button to resume normal speed.
5
4
Slow Motion
During playback, press the ❿ll (Play/Still) button to Still the image.
Then use the Search Forward (❿❿ ) to play in slow motion at
variable speeds.
• Each press increases the slow motion speed playback to 1/8, 1/4
or 1/2 normal speed.
• Audio is muted during slow motion playback.
• Front Panel Slow Motion Buttons - Press and hold the Forward
buttons on the front panel to activate slow motion playback.
Press the ❿ll (Play/Still) button to resume normal playback.
5
Stop/Resume
• Press the Stop button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the ❿ll
(Play/Still) button.
• Press the ■ (Stop) button twice to completely stop playback.
The next time you press ❿ll (Play/Still), the disc will start over
from the beginning.
56
When Playing a VCD/CD
CD
1
During play, press the DISPLAY button on the remote.
- Current track NUMBER and elapsed time will be displayed.
• Use the œor ❷ buttons to select a track. Use the ➛ or ❿ buttons
or NUMBER buttons to enter a different track number, then
press the ENTER button.
➛❿
• To enter the time from which you want to start, use the œor ❷
buttons to select, then use the NUMBER buttons to enter the
time. Press the ENTER button.
- To make the screen disappear, press the DISPLAY button again.
➢ What
is a Chapter?
Each Title on a DVD is usually divided into chapters (similar
to tracks on an audio CD).
What is a Title?
A DVD may contain several different titles. For example, if a
disc contains four different movies, each might be
considered a title.
57
DVD
Repeat Play
DVD
Programmed Playback (CD)
GB
GB
Repeat the current track, chapter, title, a chosen section (A-B), or
all of the disc.
1
Press the REPEAT button on the remote. Repeat screen appears.
2
Select Chapter, Title or A-B using the ➛ or ❿ buttons.
1
Programmed Playback lets you set a custom order for playback of
tracks on a CD.
1
1
Open Playback Mode Menu
In play mode, press the MODE button.
- Repeat A-B
• Press the REPEAT button. Select A-B on screen with the
➛ or ❿ buttons on the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
DVD
3
Press ENTER.
4
To return to normal play, press REPEAT again, then press the
➛ or ❿ buttons to select Off and press ENTER.
2
3
4
Track
Disc
RANDOM
REPEAT
Select Track
Program Playback Order
Use the up/down and left/right buttons to select the remaining
tracks, pressing Enter after each.
PROGRAM 01
• Press the CLEAR button to change selections.
Track
5
• If the title or track is completed before marking the end
(B), the end of title or track becomes B automatically.
VCD
PROGRAM
Press the up/down and left/right buttons to select the first track in
your revised playback list, then press the ENTER button.
➢ • disc
DVD repeats play by chapter or title, VCD repeat play by
or track. See page 67 to MP3 disc repeat play.
• Depending on the disc, the Repeat function may not work.
Select “PROGRAM”
Using the left/right buttons, move the selection bar to “PROGRAM”
then press ENTER to select.
Play Revised Order
Press the ❿ll (Play/Pause) button. The disc will play back in the
custom programmed order.
• While in playback mode, press the CLEAR button on the remote
control to cancel Programmed Play.
• When in VCD 2.0 mode (MENU ON mode), this function
does not work.
01
05
09
13
02
06
10
14
03 04
07 08
11 12
15 16 ❿
œ❷➛❿
RETURN
Program Order
01 - - - - - -- -- -- --- -- -- --- -- -- --- -- -- --
CLEAR
ENTER
PLAY
PROGRAM 02
Track
01
05
09
13
02
06
10
14
03 04
07 08
11 12
15 16 ❿
œ❷➛❿
RETURN
Program Order
01
-- --- -- -- --- -- -- --- -- -- --- -- -- --
CLEAR
ENTER
PLAY
DVD
Random Play (CD)
Random Playback lets the DVD-VCR set a random order for
playback of tracks on a CD.
PROGRAM
1
RANDOM
Open Playback Mode Menu
In play mode, press the MODE button.
2
Select “RANDOM”
Using the left/right buttons, move the selection arrow to “RANDOM”
then press ENTER to select.
• The disc will playback automatically in random order.
3
Cancel Random Play
Press the CLEAR button on the remote control to cancel Random
Play.
58
59
REPEAT
DVD
SCREEN FIT Play
DVD
Selecting the Audio Language (Using the Audio button)
GB
GB
You can select a desired language quickly and easily with the
AUDIO button.
1
During play, press SCREEN FIT button on remote control.
- Allows you to eliminate the black bars in the top and bottom of
the screen when a movie is playing in the Widescreen format
(16:9).
- Screen Fit will not work when the Zoom mode is active. (you can
not remove the black bars on the screen) However, Zoom mode
will work when Screen Fit is active.
1
➢
1
Press the AUDIO button.
2
Use the œor ❷ buttons to select the desired language on a DVD.
- The audio languages are represented by abbreviations.
➢
1
• This function depends on what languages are encoded
on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
DVD
• How to have the same audio language come up
whenever you play a DVD; Refer to “Setting Up the
Language Features” on page 51.
• Various aspect ratios are available only in multiple
screen format discs.
• This function does not work when a DVD has been
recorded with a multi-camera angle format.
• On some DVDs, the black bars cannot be eliminated
due to their aspect ratio.
DVD
Selecting the Subtitle Language (Using the Subtitle button)
You can select a desired subtitle quickly and easily with the
subtitle button.
1
Press the SUBTITLE button.
2
Use the œor ❷ buttons to select the desired subtitle language.
3
Use the ➛ or ❿ buttons to determine whether or not the subtitle will
be displayed.
1
- Initially, the subtitling will not appear on screen.
- The subtitle languages are represented by abbreviations.
➢ • the
This function depends on what languages are encoded on
disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same subtitle language come up
whenever you play a DVD; Refer to “Setting Up the
Language Features” on page 51.
60
61
DVD
Changing the Camera Angle
DVD
Using the Mark Function (DVD/VCD)
GB
GB
When a DVD contains multiple angles of a particular scene,
you can select the Angle function.
Press the ANGLE button to see if an ANGLE (
) mark
is present at the upper right hand corner of the screen.
1
1
When an ANGLE mark is shown, press the ANGLE button, then
an ANGLE select icon will appear at the upper left hand corner of
the screen.
2
Use the œor ❷ buttons to select the desired screen angle.
3
To turn off the display, press the ANGLE button again.
The Mark function lets you select parts of a DVD or VCD (MENU
OFF mode) so that you can quickly find the section at a later time.
1
During play, press the MARK button on the remote. The Bookmark
icons will be displayed.
2
Use the ➛ or ❿ buttons to move to the desired bookmark icon.
3
When you reach the scene you want to mark, press the ENTER
button. The icon will change to a number (1, 2, or 3).
4
Press the MARK button to turn off the display.
1
DVD
Recalling a Marked Scene
1
During play, press the MARK button on the remote.
2
Use the ➛ or ❿ buttons to select a marked scene.
3
Press the PLAY/STILL button to skip to the marked scene.
1
DVD
Clearing a Mark
1
During play, press the MARK button on the remote.
2
Use the ➛ or ❿ buttons to select the bookmark number you want
to delete.
3
Press the CLEAR button to delete a bookmark number. Press the
MARK button to turn off display.
➢
62
• Up to three scenes may be marked at a time.
• When in VCD 2.0 mode (MENU ON mode), this
function does not work.
• Depending on the disc, the Bookmark function may not
work.
63
DVD
Using the Zoom (DVD/VCD)
DVD
MP3 Play (CD-R MP3 disc requirements)
GB
GB
1
1
During play or still mode, press the ZOOM button on the remote. A
square will be displayed on screen.
2
Use the œ, ❷ or ➛, ❿ button to select the part of the screen you
want to zoom in on.
3
Press the ENTER button.
- During DVD play : press ENTER to zoom in 2X/4X/2X/Normal in
order.
- During VCD play, press ENTER to zoom in 2X/normal in order.
When playing CD-R MP3 discs, please follow the recommendations below:
• Your MP3 files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 files are compatible with Microsoft's DOS and Windows, and with
Apple's Mac. These two formats are the most widely used.
• When naming your MP3 files do not exceed 8 characters, and place ".mp3" as the file extension.
General name format of: Title.mp3. When composing your title, make sure that you use 8 characters or
less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+).
• Use a decompression transfer rate of at least 128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends on the rate of compression/decompression you choose.
Getting audio CD quality sound requires an analog/digital sampling rate (conversion to MP3 format) of at
least 128 Kbps and up to 160 Kbps. However, choosing higher rates, like 192 Kbps or more, only rarely
give better sound quality. Conversely, files with sampling rates below 128 Kbps will not be played
properly.
DVD
• Do not try recording copyright protected MP3 files.
Certain "securized" files are encrypted and code protected to prevent illegal copying. These files are of the
following types: Windows MediaTM (registered trade mark of Microsoft Inc) and SDMITM (registered trade
mark of The SDMI Foundation). You cannot copy such files.
MP3 Play
When an MP3 Disc is inserted into the DVD-VCR, the first song file
of the first folder plays.
MP3
• Your DVD player only accepts one level of file directory. Consequently you must choose:
- either to save all your MP3 recording files at the root of the disc;
- and/or create folders in the directory for each artist or music type (e.g.classical, rock, jazz, etc)
Total : 3
~
song1
RETURN
1 music c1
2 music c2
3 music c3
œ❷
MP3
ENTER
~
song1
RETURN
œ❷
64
~
Total : 12
1 song 1
2 song 2
3 song 3
4 song 4
5 song 5
6 song 6
7 song 7
8 song 8 ❿
music c1
~
music c1
1
Press STOP to stop playback of the first song file, then press
RETURN to display the music folder menu on the right side of the
screen. Up to 8 music folders can be displayed at a time. If you
have more than 8 folders on a disc, press the ➛ or ❿ buttons to
bring them up on the screen.
2
Use the œ or ❷ buttons to select the desired music folder, the
press ENTER. Use the œor ❷ buttons again to select a song file.
Press ENTER to begin playback of the song file.
➢
• Important: The above recommendations cannot be taken as a guarantee that the DVD player will play MP3
recordings, or as an assurance of sound quality. You should note that certain technologies and methods
for MP3 file recording on CD-Rs prevent optimal playback of these files on your DVD player (degraded
sound quality and in some cases, inability of the player to read the files).
Press the REPEAT button to hear only music continuously
and press it once again to release.
ENTER
65
Connecting the FM and AM antennas
Connecting the Speakers
GB
GB
Connect the front, center, and surround speakers and the
subwoofer to the speaker terminals on the back of the main unit.
1
FM antenna connections
• Connect the FM antenna to the FM 75Ω COAXIAL terminal.
• Unwind the antenna wire and then fasten it to a wall in an area
where reception is best.
- If reception is poor, connect the outdoor antenna.
Remove the existing FM antenna before connecting the 75Ω
coaxial cable.
2
1
Connect the speakers to the speaker output terminals on the back
of the main unit, matching the colors.
Caution
Do not set the Speakers (except center speaker) near the TV or Monitor
because the Speakers (except center speaker) are not magnetic shielded.
AM antenna connections
• Connect the AM loop antenna to the AM and terminals on
the back of the unit.
• Rotate the loop antenna until you have the best reception.
AM antenna
Center Speaker
Surround
Speaker (L)
Surround
Speaker (R)
FM antenna
Front Speaker (L)
Front Speaker (R)
Cooling fan
The cooling fan in the rear center of the unit ensures reliable operation and protects it from overheating.
It will operate automatically in poewr on mode.
For safety, please take note of the following points:
• Make sure that the unit is well-ventilated. Poor ventilation may cause damage by overheating.
• Make sure that the cooling fan or ventilation holes are not obstructed. (If the ventilation holes are blocked by newspaper,
clothes, etc., heat builds up inside the main unit, resulting in a risk of fire.)
• When the power is supplied to the main unit, the cooling fan will be activated.
66
Subwoofer
(for LFE)
67
Aux Audio Setting
Speaker setup
GB
GB
1
1
2
USER SET
RETURN
œ❷➛❿
3
ENTER
2
3
Select “Audio Options”
Move the selection bar to “Audio Options”, then press ENTER to
options.
Select “AUX AUDIO”
Move the selection arrow to “AUX AUDIO”, then press right to
select from the following options.
• RCA - Analog Audio input
• OPTICAL - Digital Audio input
Select “DVD”
Using the up/down and left/right buttons, move the selection cursor
to “DVD Setup”, then press ENTER to select.
Select “Options”
Using the up/down and left/right buttons, move the selection cursor
to “USER SET”, then press ENTER to select.
Ideal speaker
placement
With the DVD in stop mode, press the SETUP button.
Open “MEIN MENU”
With the DVD in stop mode, press the SETUP button.
MAIN MENU
Open “MAIN MENU”
Setting the delay time
Ideal speaker placement
USER SET
COLOUR SYSTEM
NICAM
IPC
AUTO POWER OFF
SHOWVIEW EXTEND
AUX AUDIO
RETURN
:AUTO
:ON
:ON
:OFF
:OFF
:RCA
œ❷➛❿
➢
Optical(Digital Audio Input) is available for PCM and
Dolby Digital only.
RCA
OPTICAL
Speaker Volume Control
1
H/PHONE Volume Control
• You can adjust the volume by connecting the H/PHONE to the
H/PHONE JACK on the front panel.
• The volume can be adjusted from level 31, and the AMP SPEAKER
will be muted.
• The LINE OUT AUDIO will be output continuously while the
H/PHONE is connected.
2
You can customize the sound to best fit the specific acoustics of the
room by adding a delay to the sound from the center and surround
speakers.
The delay time is initially set to 0 ms.
◆ You can enjoy the best sound during 5.1 channel surround
playback if the distance between you and each speaker is the
same. You can adjust the delay time for the center and surround
speakers according to the placement of the speakers in the
room.
◆ For the center speaker
If the distance of Dc is equal to or longer than the distance of
Df, set the delay time to 0 ms.
Otherwise, change the value according to the table.
(A)=Df-Dc
◆ For the surround speakers
If the distance of Df is equal to the distance of Ds, set the delay
time to
0 ms.
Otherwise, change the value according to the table shown on
the right.
(B)=Df-Ds
Value (ms)
0.00
1.12
2.23
3.34
4.46
5.58
0.00
13.38
26.77
40.15
53.54
66.93
(B) Distance (feet/inch)
Value (ms)
0.00
3.35
6.69
10.03
13.39
16.73
0.00
40.15
80.31
120.47
160.62
200.79
Ideal speaker placement
1
Center speaker
Place the speaker directly over or under the TV. But, ideally, the
center speaker should be positioned with the top surface flush
with the front speakers..
AMP SPEAKER Control
• Connect the speaker to the speaker jack on the rear.
• The volume can be adjusted from level 20.
• When you turn the power ON, if the last volume level was over
20, the volume will be set to 20, and if it was under 20, the
volume will be set to that level.
(A) Distance (feet/inch)
2
Front speakers
Place the front speakers so that their tweeters (high-range) are
aligned at about the same height as ear level and at a horizontal
angle of 45° with respect to the prime listening position.
3
Surround speakers
Place these speakers behind your listening position, facing slightly
inwards, about 2 to 3 feet (60 to 90 cm) above ear level.
If there isn't enough space behind the listening position (i.e., close
to the wall), place the surround speakers at either side with their
front surfaces facing each other.
4
Subwoofer
The position or orientation of the subwoofer is not as critical.
Place it anywhere you want.
68
69
Speaker setup
Dolby Pro Logic II decoder
GB
GB
To adjust the speaker balance
1
1
Press the SPEAKER button.
• Each time you press the button, the speaker is selected in the
order of FL➝ C ➝ FR ➝ SR ➝ SL ➝ SW ➝ VOL.
You will see this on the unit's display.
2
2
Use the + and - buttons to adjust the volume on the desired
speaker.
Dolby Pro Logic II is a new format for playing multichannel audio
signals that offers improvement over conventional Dolby Pro Logic.
It can be used to decode not only sources recorded in Dolby
Surround, but also regular stereo sources into five channels (front
left/right, center and surround left/right). In addition, various
parameters can be set according to the type of source and contents,
so you can adjust the sound field with greater precision.
1
Select the source you want to use. (CD, Video, FM/AM, Input
(AV1, AV2, AUX, TV CH))
1
Press the SOUND MODE button.
• Press the SOUND MODE button repeatedly to select Dolby Pro
Logic II.
2
Press the SOUND EFFECT button.
• The volume can be adjusted with in the range of -12 to 0 to +12.
• Each time you press the button, the sound effect changes as
follows.
2
2
To test the speakers
1
Press the TEST button.
• Each time you press the button, the test tone will be heard
in the order of FL (Front speaker/L) ➝ C (Center speaker) ➝
FR (Front speaker/R) ➝SR (Surround speaker/R) ➝
SL (Surround speaker/L) ➝ SW (Subwoofer).
1
2
To stop the test tone, press the TEST button again.
➢ You
can adjust the speaker balance for the selected channel
using the Volume Control buttons during the test tone
operation.
3
Select the desired mode ("MATRIX, "MOVIE", or "MUSIC").
• Matrix: Use when playing sources recorded in monaural.
• Movie: Use this when viewing movies.
• Music: Use this mainly for music listening.
➢ ◆ Dolby Pro Logic II may not be selected depending on the
disc used. (DTS DVD, Dolby Digital 5.1, VCD, MP3)
◆ When playing a DVD recorded in 2-channel Dolby Digital,
it will automatically be output in Dolby Pro Logic II.
◆ Dolby Pro Logic II operates only when CD, VIDEO,
FM/AM, or INPUT (AV1, AV2, AUX or TV Broadcast) is
selected. Mode, Sound Effect cannot be selected while the
DVD signal is being input.
70
71
Listening to radio broadcasts
SOUND mode/effect function
GB
GB
This feature simulates the sound of different acoustic spaces.
1
1
Press the SOUND MODE button.
PL II
• Each time you press the button,
the sound mode changes as
follows.
NATURAL
You can automatically or manually tune in to FM and AM stations
to listen to radio broadcasts.
1
2
Tune in to a station.
• Automatic tuning : Hold down l➛➛ / ❿❿l to begin the
automatic tuning.
• Manual tuning : Press l➛➛ to tune in to a lower frequency, or
press ❿❿l to tune in to a higher frequency.
CONCERT
STADIUM
1
• Each time you press the button, the band alternates between
FM and AM.
JAZZ
• The SOUND mode adds a coustic
surround effect during playback of
stereo analog or linear PCM digital
signals.
Press the FM/AM button.
➢ The FM/AM function cannot be selected while operating the
2
2
DVD player or VCR.
2
2
Press the SOUND EFFECT button.
• Each time you press the button, the selection alternates between
EFFECT 1 and EFFECT 2.
• The higher the number, the greater the effect.
• If you press the button while in the STEREO mode, the selection
Presetting stations
alternates between STEREO snd 4 Stereo.
Example: Storing an FM station of 89.1 MHz into the preset number
02 of the FM1 band
Dolby Pro Logic II
● : 5.1ch
▲ : STEREO
ON
OFF
PL II
STEREO
NATURAL
JAZZ
CONCERT
STADIUM
Video Tape
●
▲
●
●
●
●
TV, FM/AM
●
▲
●
●
●
●
AUX
●
▲
●
●
●
●
OPTICAL
(PCM)
●
▲
●
●
●
●
Mode
Source
1
2
3
4
Press the FM/AM button to select the FM band.
• Each time you press the button, the band alternates between
FM and AM.
Select a channel to choose the memory address to which you want
to store the station.
2
1
3
3
Use the ➛➛ and ❿❿ buttons to tune in to 89.1 FM.
Press the ■ button or the ENTER button on the remote control.
• 89.1 FM is stored in FM1.
➢ ◆ The Sound mode and effects do not Work With Dolby Digital, DTS, VCD, MP3, LPCM
disc, and Optical Input(OPTICAL) sources.
5
6
4
Press the ■ STOP button or ENTER button again to store FM
station 89.1 to FM 1.
◆ Dolby Digital, DTS, Optical Input (Dolby Digital) : 5.1-Channel speaker output
◆ VCD, MP3, LPCM, Optical Input (PCM) : Outputs to the front left, right, and subwoofer
speakers only.
Select a channel to select a preset station number.
7
To store other stations Repeat steps 1 to 6 above.
• You can use the CHANNEL button to store up to 20 FM stations
and 10 AM stations.
◆ During DTS or MPEG playback, audio is output only to the speakers.
Audio is not output using other connections.
➢
•
will be indicated when tuned to an FM station.
• To store other channels, repeat the steps 2 to 4 above.
72
73
Technical Specifications
GB
GB
General
Rated voltage
230V (AC), 50Hz
FRONT SPEAKER
50W X 2 (6Ω)
Weight
6.2 Kg
CENTER SPEAKER
50 W (6Ω)
Size
430mm X 383mm X 100mm
Operating ambient temperature
+5°C ~ +35°C
Installation conditions
Input
Audio input (Rear)
Euro Scart socket : -8dBm, 47Kohm unbalanced
Audio (DVD only)
Digital Audio (Optical)
SYSTEM
RCA jack, Euro Scart socket
Audio (DVD only)
Audio out (RCA jack)
Video (DVD, VCR)
RCA jack, Euro Scart socket
74
SURROUND SPEAKER
50 W X 2 (6Ω)
SUBWOOFER SPEAKER
100 W (3Ω)
FREQ.RESPONSE
20 Hz ~ 20kHz
S/N RATIO
75 dB
CHANNEL SEPERATION
50 dB
SPEAKER SYSTEM
5.1 CHANNEL SPEAKER SYSTEM
FRONT/CENTER/SURROUND
IMPEDANCE
3Ω
55Hz ~ 23kHz
30Hz ~ 400kHz
87dB/W/M
86dB/W/M
50W
100W
FRONT
110(W)x129(D)x100(H)
SURROUND
250(W) x 250(D) x 380(H)
O.S.L
RATING INPUT
S-Video out
RGB out : Euro Scart socket
SIZE
VHS type video tape,
CENTER
S-VHS type video tape (Playback only)
PAL, MESECAM, NTSC4.43, NTSC playback on PAL TV
Tuning system
B/G, D/K
WEIGHT
Above 43dB (standard recording)
Resolution
Above 240 lines (standard recording)
Audio S/N
Above 68dB (Hi-Fi), 39dB (Mono)
Audio frequency characteristics
20Hz - 20KHz (Hi-Fi)
Disc
DVD, CD (12cm), CD (8cm), VIDEO-CD (12cm)
Audio S/N
95dB
Audio dynamic range
105dB
ENVIRONMENT
41-104ºF (5-40ºC); 10%-75% humidity
WEIGHT
6.2kg (Combo) + 10.2kg (SPEAKER) = 16.4kg
FM
AM
15 dB
64 dB
S/N RATIO
60 dB
35 dB
THD
0.5 %
2%
150(W)x129(D)x100(H)
FRONT
0.72kg x 4 = 2.88kg
SURROUND
CENTER
Video S/N
SUBWOOFER SPEAKER
6Ω X 5
FREQ. RESPONSE
Color system
SENSITIVITY
RECEIVER
SPEAKER
UHF 21-69 (Initial CH36)
Audio (DVD, VCR)
Tape format
DVD
Relative humidity : Below 75%
Euro Scart socket : 1.0Vp-p (unbalanced) 75Ω
Video (DVD only)
VCR
Operation position : Horizontal,
Video input (Rear)
RF out
Output
AMP
5.9kg
1.1kg
75
Problems and Solutions (VCR)
Troubleshooting Guide (DVD)
GB
GB
Before contacting the Samsung after-sales service, perform the following simple checks.
Problem
Before requesting service (troubleshooting)
Explanation/Solution
No power
◆
◆
Check that the power plug is connected to a wall outlet.
Have you pressed the STANDBY/ON button?
You cannot insert a video cassette
◆
A video cassette can only be inserted with the window
side up and the safety tab facing you.
The television programme was not recorded
◆
◆
◆
Check the DVD-VCR aerial connections.
Is the DVD-VCR tuner properly set?
Check if the safety tab is intact on the cassette.
Timer recording was unsuccessful
◆
◆
◆
Was the STANDBY/ON button pressed to activate the timer?
Re-check the recording start/stop time settings.
If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
No playback picture or the picture
is distorted
◆
Check to see if you are using a prerecorded tape.
You cannot see normal broadcasts
◆
Check the TUNER/EXTERNAL setting. It should be on
TUNER.
Check the TV/VCR aerial connections.
◆
Problem
Disc does not play.
5.1 channel sound is not
being reproduced.
P6
◆
Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
Check if your audio system is connected and working properly.
P67, 72
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
P56-64
◆
Some of the functions selected in the DVD SETUP may not work
properly if the disc is not encoded with the corresponding function.
P49-54
◆
The Screen Ratio is fixed on your DVDs.
◆
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
P67-72
◆
Press power on from a cold start with no disc in the unit. Press the
❿❿ and ➛➛ buttons simultaneously on the front panel for five
seconds. The Select Menu Language display will appear. Select the
desired language button. Press the SETUP button on the remote
control to select the Parental Mode. The Parental Mode is now
unlocked as indicated on the display. Press the DOWN button to
select Parental. Press ENTER and the Create Password display will
appear. You can now set your rating level and change your
password to a new number.
P52
◆
◆
Playback mode differs from
the Setup Menu selection.
◆
Press the PROG/TRK (œ or ❷) buttons to minimize this
effect.
When the ❿II button is pressed
during playback, the still picture
has severe “noise bars” streaks
◆
A still picture may have “noise bars”, depending on the
condition of the tape. Press the PROG/TRK (œ or ❷) buttons
during SLOW motion to minimize this effect.
The screen ratio cannot be
changed.
Video Head Cleaning
◆
If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
No audio.
1. Remove the aerial input plug from the socket marked (aerial
symbol) on the rear of the DVD-VCR.
2. Carry out the instructions “Tuning Your Television for the DVDVCR” (see page 15).
3. Carry out the instructions “Setting the DVD-VCR output
Channel” (see page 25), move the channel number
several channels down from the original setting.
(example: from 38 to 40).
4. Replace the aerial plug into the socket marked (aerial symbol)
on the rear of the DVD-VCR.
5. Re-tune your TV to the DVD-VCR again by following
instructions “Tuning Your Television for the DVD-VCR”
(page 15).
6. If the problem still exists repeat steps 1 to 5 moving several
more channels away from the original setting.
Page
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, a
VIDEO-CD or a CD.
The
icon appears on
screen.
Noise bars or streaks on playback
If when tuning in your TV to the DVD-VCR
your TV does not find the screen or the
screen when found suffers from
interference, it may be due to the
DVD-VCR output channel clashing with
the normal TV transmissions in your area.
To prevent this you will need to change the
DVD-VCR output channel in the following
way
Action
◆
◆
◆
Forgot password
If you experience other
problems.
◆
◆
P54
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
If you are unable to solve the problem after reading the above instructions, note:
◆ The model and serial number on the rear of your DVD-VCR
◆ The warranty information
◆ A clear description of the problem
Then contact your nearest SAMSUNG after-sales service.
76
77
■ OROI THS EGGUHSHS
1. H egguvhsh iscuvei eavn kai movnon ovtan to proi>onv creiavzetai
service kai h egguhtikhv kavrta evcei plhvrwı sumplhrwqeiv kai
proskomisqeiv maziv me to pragmatikov
timolovgio hv thn apovdeixh plhrwmhvı kai o ariqmovı tou
proi¨ovntoı eivnai eukrinhvı.
2. H upocrevwsh thı SAMSUNG aforav movno thn episkeuhv tou
proi¨ovntoı.
EUROELECTRIC S.A.
17o clm. Eqnikhvı Odouv Aqhnwvn - Aamivaı
145 10 Khfisiav
Thl. 620.32.46/-7/-8
Agaphtoiv pelavteı,
Saı eucaristouvme gia thn empistosuvnh pou deivxate sthn
SAMSUNG me thn agorav authvı thı suskeuhvı.
To proi>onv autov thı SAMSUNG eivnai egguhmevno gia perivodo
dwvdeka (12) mhnwvn apov thn pragmatikhv hmeromhniva agoravı tou
gia antallaktikav kai ergatikav.
Sthn perivptwsh pou qa creiasteiv episkeuhv, to proi>onv autov thı
SAMSUNG qa prevpei na staleiv sto exousiodothmevno service.
Exousiodothmevnoi antiprovswpoi kai exousiodothmevna kevntra
service thı SAMSUNG, se avlleı Eurwpai¨kevı cwvreı, qa
apodectouvn touı ovrouı thı egguvhshı sthn cwvreı ovpou evcei
agorasteiv to proi>ovn.
Plhroforiveı gia ta exousiodothmevna kevntra service mporeivte na
pavrete apov thnÚ
ELEC
3. H episkeuhv tou proi>onv toı prevpei na anativqetai se
exousiodothmevna kevntra service hv se exousiodothmevnouı
antiproswvpouı thı SAMSUNG. Kammiva apovzhmivwsh den qa
givnei apodekthv gia episkeuevı pou evcoun givnei apov mh
exousiodothmevna apov thn SAMSUNG sunergeiva hv
antiproswvpouı, kaqwvı epivshı kai gia kavqe episkeuhv kai
zhmiveı pou proklhvqhkan katav thn episkeuhv authv pou den
kaluvptontai apov tou” ovrouı thı egguhvsewı.
4. To proi>onv autov den qa qewrhqeiv ellatwmatikov sta ulikav hv sthn
ergasiva kataskeuhvı eavn qa prevpei na prosarmosteiv,
metatrapeiv hv ruqmisteiv wvste na summorfwqeiv me tiı eqnikevı hv
topikev” tecnikevı prodiagrafevı hv prodiagrafevı pou iscuvoun se
opoiadhvpote cwvha avllh ap j authv gia thn opoiva prooriıovtan
kai kataskeuavsthke.
H egguvhsh authv den kaluvptei apozhmiwvseiı giaÚ
a) Belovneı kai kefaleı pik-ap
b) kefalevı video kai kasetofwvnwn
g) kefalevı camcordor
d) gennhvtrieı aktivnwn laser sta compact disk
e) thleceiristhvria
st) lucniveı fouvrnwn mikrokumavtwn
z) prosarmogevı, metatropeı hv ruqmivseiı hv prospavqeieı proı
touvto, anexavrthta tou eavn hvnan epituceiı hv anepituceivı
ouvte opoiadhvpote zhmiva pou eivnai apotevlesma touı.
Please ensure the form above is completed at the time of purchase and
present it to the dealer to quality for guarantee service,
otherwise your guarantee may be affected.
ELLAS (GREECE)
CAUTION
CUSTOMER'S SIGNATURE
DEALER’S ADDRESS
Handlendesadress, Forhandleradresse, Dirección de negociante, Dirección del vendedor. Endereco de vendedor,
Adresse des Händlers, Adres van handelaar, Adresse du marchand, Dieuvqunsh tou katasthmatoı, Asiakkaan nimi,
Forhandlerens adresse, Handlarens adress
TAKUU
DEALER'S STAMP & SIGNATURE
DEALER’S TEL. NO.
Handlendestelesonnummer, Forhandlertelefonnummer, No. de Tel. de negociante, No. de Tel. del vendedor,
Número de telefone de vendedor, Telefonnummer des Handlers, Telefoon nummer van handelaar, Numéro tél´phone du
marchand, il numero di telefono del commeciante, Ariqmovı thlefwvnou tou katasthvmatoı, Myyjän osoite, Forhandlerens
tel.nr., Handlarens telefonnr.
DEALER’S NAME
Handlendesnavn, Forhandler, Nombre de negociante, Nombre del vendedor, Nome de vendedor, Name des Händlers,
Naam van handelaar, Nom du marchand, il nome del commerciante, Onoma tou katasthvmatoı, Jalleenmyyjan, Forhandler,
Aterforsaljare
CUSTOMER’S ADDRESS
Kundeasdress, Kundeadresse, Dirección de client, Direccion del cliente, Endereco de cliente, Adresse des Kunden,
Adres van klant, adresse du client, L’indrizzo del cliente. Dieuvqunsh tou agopasthv, Ostopäivä, Kundens adresse,
Customer’s address
CUSTOMER’S TEL. NO.
Kundesadress, Kundetelefonnummer, No. de Tel. de client, No. de Tel del cliente, Número de telefone de cliente,
Telefonnummer des Kunden, Telefoon nummer van klant, Numéro de téléphone du client, il numero de telefono del client ,
Ariqmovı thlefwvnou tou agorasthv, Myyjän puh.nro, Kundens telefonnr, Kundens telefonnr.
CUSTOMER’S NAME
Kundesnavn, Kundenavn, Nombre de cliente, Nombrre del cliente, Nome de cliente, Name des Kunden,
Naam van klant, Nom du client, il nome del clinte, Onomatepwvnumo tou agopasthv, Sarjanro, Kundens navn, Kundens namn
DATE OF PURCHASE
Kóbetid, Købsadato, Fecha de compra, Data de compra, Kaufdatum, Datum van aankoop, Date d’achat,
La data d’acquisto, Hmeromhniva agoravı agorasthv, Asiakkaan osoite, Salgsdato, Inköpsdatumv
SERIAL NO.
Serienummer, No. de serie, Número serial, Seriennummer, Serie nummer, Numéro de série,
II numero di matricola, Ariqmovı kataskeuhvı, Malli, Serienummer., Serienr
MODEL NAME
Modelnavn, Nombre de modelo, Nombre del modelo, Nome de modelo, Modellbezeichnung, Modelnaam,
Nom du modèle, II nome di modello, Montevlo proi>onv toı, Asiakkaan puh.nro, Modelnaven, Modell
WARRANTY CARD
ΕΓΓΥΗΣΗ
GARANTIA
GARANTIE
GARANTÍA
GARANTI
GARANZIA
GUARANTEE
ELECTRONICS
SAMSUNG EUROPEAN BLOC WARRANTY
5. H egguvhsh authv den kaluvptei kammiva apov tiı pio kavtw
periptwvseiıÚ
A. Periodikouvı elevcouı, sunthvrhsh kai episkeuhv hv
antikatavstash merwvn pou ofeivlontai se fusiologikhv
fqorav.
B. Ta evxoda kai touı kinduvnouı metaforavı pou scetivzontai me
thn egguvhsh autouv pou proi¨ovntoı.
G. Zhmiva se autov to proi>onv tou proevrcetai apovÚ
1) Katavcrhsh hv kakhv crhvsh, sumperilambanomevnhı allav kai
mh periorismevnhı seÚ
a. mh crhvsh autouv tou proivonv toı gia touı skopouvı pou
fusiologikav proorivzetai hv suvmfwna me tiı odhgiveı
crhvsewı gia thn swsthv crhvsh kai sunthvrhsh autouv
tou proi>onv toı kai
b. thn egkatavstash kai crhvsh tou proi>onv toı me trovpo
pou antivkeitai stiı tecnikevı prodiagrafevı asfaleivaı
pou iscuvoun sthn cwvra ovrou crhsimopoieivtai to
proi¨ovn.
2) Episkeuevı pou evginan apov mh exousiodothmevna
ergasthvria service.
3) Atuchvmata, qeomhniveı hv opoiadhvpote aitiva pevra tou
elevgcou thı SAMSUNG sumperilambanomevnwn allav mh
periorizomevnwn twn keraunwvn, tou nerouv, thı fwtiavı, twn
dhmovsiwn anataracwvn kai tou kakouv aerismouv.
EURWPAIKH EGGUHSH
EUROELECTRIC S.A
4) H egguvhsh authv den ephreavzei ta dikaiwvmata tou
katanalwthv pou problevpontai apov thn efarmosteva eqnikhv
nomoqesiva pou iscuvei, ouvte ta dikaiwvmata tou katanalwthv
enantivon tou lianopwlhthv pou aporrevoun apov thn suvmbash
pwvlhsh”.
5) Se perivptwsh pou den upavrcei eqnikhvn omoqesiva, authv h
egguvhsh qa eivnai h monadikhv kai apokleistikhv kavluyh tou
katanalwthv, kai ouvte h SAMSUNG ouvte h qugatrikhv thı,
o antiprovswpoı thı pou anagravfetai se authv thn Kavrta
Egguvhshı, qa euquvnetai gia kavqe qetikhv hv apoqematikhv
zhmiva gia evlleiyh kavqe rhthvı hv nomizovmenhı idiovthtaı tou
proi>ovntoı.
THIS APPLIANCE IS DISTRIBUTED BY
www.samsungvcr.com
AK68-00096K
Download PDF

advertising