Samsung | BD-H6500 | Samsung Blu-ray Player H6500 Benutzerhandbuch

BD-H6500
Blu-ray™ Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
This Nanum Gothic Eco font is provided by NAVER.
[BD-H6500-XU]AK68-02465G-02ENG-.indd 1
2014-05-27 오후 1:38:49
Safety Information
Warning
This symbol indicates that high voltage
is present inside. It is dangerous to make
any kind of contact with any internal
part of this product.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
• The slots and openings in the cabinet and
in the back or bottom are provided for
necessary ventilation. To ensure reliable
operation of this apparatus, and to protect it
from overheating, these slots and openings
must never be blocked or covered.
-- Do not place this apparatus in a confined
space, such as a bookcase, or builtin cabinet, unless proper ventilation is
provided.
-- Do not place this apparatus near or over
a radiator or heat register, or where it is
exposed to direct sunlight.
-- Do not place vessels (vases etc.) containing
water on this apparatus. A water spill can
cause a fire or electric shock.
• Do not expose this apparatus to rain or place
it near water (near a bathtub, washbowl,
kitchen sink, or pool, etc.). If this apparatus
accidentally gets wet, unplug it and contact
an authorised dealer immediately.
• This apparatus uses batteries. In your
community, there might be environmental
regulations that require you to dispose of
these batteries properly. Please contact your
local authorities for disposal or recycling
information.
• Do not overload wall outlets, extension cords
or adaptors beyond their capacity, since this
can result in fire or electric shock.
• Route power-supply cords so that they
are not likely to be walked on or pinched
by items placed on or against them. Pay
particular attention to cords at the plug end,
at wall outlets, and the point where they exit
from the apparatus.
2
[BD-H6500-XU]AK68-02465G-02ENG-.indd 2
This symbol indicates that important
literature concerning operation and
maintenance has been included with
this product.
• To protect this apparatus from a lightning
storm, or when it is left unattended and
unused for long periods of time, unplug
it from the wall outlet and disconnect the
antenna or cable system. This will prevent
damage to the set due to lightning and
power line surges.
• Before connecting the AC power cord to the
DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds
to the local electrical supply.
• Never insert anything metallic into the open
parts of this apparatus. Doing so may create
a danger of electric shock.
• To avoid electric shock, never touch the
inside of this apparatus. Only a qualified
technician should open this apparatus.
• Make sure to plug the power cord in until
it is firmly seated. When unplugging the
power cord from a wall outlet, always pull
on the power cord's plug. Never unplug by
pulling on the power cord. Do not touch the
power cord with wet hands.
• If this apparatus does not operate normally
- in particular, if there are any unusual
sounds or smells coming from it - unplug
it immediately and contact an authorised
dealer or service Centre.
English
2014-05-27 오후 1:38:50
3
[BD-H6500-XU]AK68-02465G-02ENG-.indd 3
• To clean this apparatus, unplug the power
cord from the wall outlet and wipe the
product using a soft, dry cloth. Do not
use any chemicals such as wax, benzene,
alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals can
damage the appearance of the product or
erase the printing on the product.
• Do not expose this apparatus to dripping
or splashing. Do not put objects filled with
liquids, such as vases on the apparatus.
• Do not dispose of batteries in a fire.
• Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a fire.
• There is danger of an explosion if you
replace the batteries used in the remote with
the wrong type of battery. Replace only with
the same or equivalent type.
• WARNING - TO PREVENT THE
SPREAD OF FIRE, KEEP CANDLES
AND OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
01 Safety Information
• Maintenance of Cabinet.
-- Before connecting other components to
this product, be sure to turn them off.
-- If you move your product suddenly from a
cold place to a warm place, condensation
may occur on the operating parts and lens
and cause abnormal disc playback. If this
occurs, unplug the product, wait for two
hours, and then connect the plug to the
power outlet. Then, insert the disc, and try
to play back again.
• Be sure to pull the power plug out of the
outlet if the product is to remain unused or
if you are leaving the house for an extended
period of time (especially when children,
elderly, or disabled people will be left alone
in the house).
-- Accumulated dust can cause an electric
shock, an electric leakage, or a fire by
causing the power cord to generate sparks
and heat or the insulation to deteriorate.
• Contact an authorised service Centre for
information if you intend to install your
product in a location with heavy dust,
high or low temperatures, high humidity,
chemical substances, or where it will operate
24 hours a day such as in an airport, a train
station, etc. Failing to do so may lead to
serious damage of your product.
• Use only a properly grounded plug and wall
outlet.
-- An improper ground may cause electric
shock or equipment damage. (Class l
Equipment only.)
• To turn this apparatus off completely, you
must disconnect it from the wall outlet.
Consequently, the wall outlet and power
plug must be readily accessible at all times.
• Do not allow children to hang on the
product.
• Store the accessories (battery, etc.) in a
location safely out of the reach of children.
• Do not install the product in an unstable
location such as a shaky self, a slanted floor,
or a location exposed to vibration.
• Do not drop or strike the product. If the
product is damaged, disconnect the power
cord and contact a service Centre.
CLASS 1 LASER product
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
CAUTION :
• THIS PRODUCT USES AN INVISIBLE LASER
BEAM WHICH CAN CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED. BE
SURE TO OPERATE PRODUCT CORRECTLY
AS INSTRUCTED.
English
2014-05-27 오후 1:38:51
Safety Information
• THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVERS AND DO
NOT REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
This product satisfies CE regulations when
shielded cables and connectors are used
to connect the unit to other equipment.
To prevent electromagnetic interference
with electric appliances, such as radios
and televisions, use shielded cables and
connectors for connections.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
Precautions
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for
future reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
||NOTE |
\\ If the Region number of a Blu-ray Disc/DVDs does
not correspond to the Region number of this
product, the product cannot play the disc.
IMPORTANT NOTE
The mains lead on this equipment is supplied
with a molded plug incorporating a fuse. The
value of the fuse is indicated on the pin face of
the plug.
If it requires replacing, a fuse approved to
BS1362 of the same rating must be used.
Never use the plug with the fuse cover omitted
if the cover is detachable. If a replacement fuse
cover is required, it must be of the same colour
as the pin face of the plug. Replacement
covers are available from your dealer.
If the fitted plug is not suitable for the power
points in your house or the cable is not long
enough to reach a power point, you should
obtain a suitable safety approved extension
lead or consult your dealer for assistance.
However, if there is no alternative to cutting
off the plug, remove the fuse and then safely
dispose of the plug. Do not connect the plug
to a mains jack, as there is a risk of shock
hazard from the bared flexible cord.
4
[BD-H6500-XU]AK68-02465G-02ENG-.indd 4
To disconnect the apparatus from the mains,
the plug must be pulled out from the mains
socket, therefore the mains plug shall be
readily operable.
The product unit accompanying this user
manual is licenced under certain in
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including AV receivers)
that produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where it exits the apparatus.
English
2014-05-27 오후 1:38:51
11. Only use attachments/accessories
specified by the manufacturer.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or
plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
Using the 3D function
IMPORTANT HEALTH AND SAFETY
INFORMATION FOR 3D PICTURES.
Read and understand the following safety
information before using the 3D function.
• Some viewers may experience discomfort
while viewing 3D TV such as dizziness,
nausea, and headaches.
If you experience any such symptom, stop
viewing 3D TV, remove the 3D Active
Glasses, and rest.
• Watching 3D images for an extended period
of time may cause eye strain. If you feel eye
strain, stop viewing 3D TV, remove your 3D
Active Glasses, and rest.
• A responsible adult should frequently check
on children who are using the 3D function.
If there are any reports of tired eyes,
headaches, dizziness, or nausea, have the
child stop viewing 3D TV and rest.
5
[BD-H6500-XU]AK68-02465G-02ENG-.indd 5
01 Safety Information
12. Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
• Do not use the 3D Active Glasses for other
purposes (such as general eyeglasses,
sunglasses, protective goggles, etc.).
• Do not use the 3D function or 3D Active
Glasses while walking or moving around.
Using the 3D function or 3D Active Glasses
while moving around may cause you to
bump into objects, trip, and/or fall, and
cause serious injury.
• If you want to enjoy 3D content, connect a
3D device (3D compliant AV receiver or TV)
to the player's HDMI OUT port using a highspeed HDMI cable. Put on 3D glasses before
playing the 3D content.
• The player outputs 3D signals only through
HDMI cable connected to the HDMI OUT
port.
• The video resolution in 3D play mode is
determined by the resolution of the original
3D video. You can not change the resolution.
• Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may
not operate properly in 3D play mode.
• You must use a high-speed HDMI cable for
proper output of the 3D signal.
• Stay at least three times the width of the
screen from the TV when watching 3D
images. For example, if you have a 46-inch
screen, stay 138 inches (11.5 feet) from the
screen.
• Place the 3D video screen at eye level for the
best 3D picture.
• When the player is connected to some 3D
devices, the 3D effect may not function
properly.
• This player does not convert 2D content into
3D.
• "Blu-ray 3D" and "Blu-ray 3D" logo are
trademarks of the Blu-ray Disc Association.
English
2014-05-27 오후 1:38:51
Contents
16
Safety Information
2
Warning
4
Precautions
5
Using the 3D function
4
Important Safety Instructions
8
9
9
10
10
16
Picture
17
Network
18
System
17
Sound
18
Smart Hub
20
20
Getting Started
20
23
Accessories
23
Front Panel
24
Rear Panel
24
Remote Control
Settings Menu Functions
Support
Networks and the Internet
Configuring Your Network Connection
Wi-Fi Direct
Upgrading Software
Update Now
Auto Update
Tour of the Remote Control
Media Play
Connections
11
12
26
Playing Commercial Discs
26
Playing Photos, Videos, and Music
(Multimedia)
26
Connecting to a TV
Connecting to an Audio System
Disc Storage & Management
12
Method 1 Connecting to an HDMI
supported AV receiver
26
12
Playing Media Content Saved on a USB
Device
Method 2 Connecting to an AV receiver
with Dolby Digital or DTS decoder
27
Playing Media Content Saved in a
Computer/Mobile Device
13
13
13
Connecting to a Network Router
Wired Network
Wireless Network
14
15
15
The Initial Settings Procedure
The Home Screen
Accessing the Settings Screen
Buttons on the Remote Control Used
for the Settings Menu
6
[BD-H6500-XU]AK68-02465G-02ENG-.indd 6
Playing a Disc with User Recorded
Content
28
Playing Media Content Saved in a Cloud
Service
28
Samsung Link
29
Settings
14
27
Controlling Video Playback
29
Buttons on the Remote Control used for
Video Playback
29
Using the Settings Menu (During the
Playback)
31
Using the View & Options Menus
English
2014-05-27 오후 1:38:52
31
Appendix
Controlling Music Playback
Buttons on the Remote Control used for
Music Playback
32
Using the Options Menu (During the
Playback)
32
Using the View & Options Menus (On a
file screen)
33
Repeating Tracks on an Audio CD
33
Creating a Playlist from an Audio CD
33
33
34
34
35
36
36
36
46
Shuffling Tracks on an Audio CD
37
38
39
39
40
41
41
42
42
43
48
49
Ripping
Playing Photo Contents
Using the Tools Menu (During Playback)
Send files
Using the Send Function
Digital Output Selection
Disc and Format Compatibility
Repairs
53
Disc types and contents your product
can play
53
Disc types your product cannot play
Region Code
54
Logos of Discs the product can play
58
Compliance and Compatibility Notice
59
59
60
62
Creating a Samsung Account
Resolution according to the contents
type
53
55
Copying Videos, Music or Photos
Notes
Troubleshooting
54
Using the View & Options Menus
Additional Information
50
52
Network Services
37
46
Contents
31
Supported Formats
Copy Protection
Network Service Disclaimer
Licences
Specifications
Before Using Apps
Using Films and TV Shows
Using Apps
The Apps Screen at a Glance
Starting an Application
Screen mirroring
Using the Web Browser
Link Browsing and Pointer Browsing
The Control Panel at a Glance
Using the Setting Menu
45
Linking Your Internet Service Accounts to
the Product
45
BD-LIVE™
7
[BD-H6500-XU]AK68-02465G-02ENG-.indd 7
English
2014-05-27 오후 1:38:53
Getting Started
Accessories
Check for the supplied accessories shown below.
Batteries for Remote Control (AAA Size)
User Manual
SOURCE
VOL
VOL
– + VOL
+–
VOL
SAMSUNG TV
1
2
4
5
7
8
DISC MENU
3
6
9
TITLE MENU
0
SMART
POPUP
HOME
HOME
REPEAT
HUB
INFO
RETURN
EXIT
A
SEARCH
PANDORA
Quick Setup Guide
B
C
DIGITAL
SUBTITLE
AUDIO SUBTITLE
D
FULL
SCREEN
INPUT
Remote Control
8
[BD-H6500-XU]AK68-02465G-02ENG-.indd 8
APPS
TOOLS
English
2014-05-27 오후 1:38:54
Front Panel
02 Getting Started
PLAY/PAUSE BUTTON
STOP BUTTON
OPEN/CLOSE BUTTON
POWER BUTTON
USB HOST
DISPLAY
DISC TRAY
REMOTE CONTROL SENSOR
||NOTE |
\\ To upgrade the product's software through the USB Host jack, you must use a USB memory stick.
\\ When the product displays the Blu-ray Disc's menu, you cannot start the movie by pressing the Play button on
the product or the remote control. To play the movie, you must select Play Movie or Start in the disc's menu, and
then press the v button on the remote control.
Rear Panel
HDMI OUT
LAN
DIGITAL AUDIO OUT
9
[BD-H6500-XU]AK68-02465G-02ENG-.indd 9
English
2014-05-27 오후 1:38:55
Getting Started
Remote Control
Tour of the Remote Control
After setup, allows you to set the input
source on your TV.
(This button is only available for Samsung TVs.)
Turn the player on and off.
VOL
Use to enter the disc menu.
VOL
– + VOL
+–
VOL
SAMSUNG TV
Press to open and close the disc tray.
Press the number buttons to operate
options.
Turn the TV on and off.
(This button is only available for Samsung
TVs.)
SOURCE
1
2
3
4
5
6
7
8
DISC MENU
9
TITLE MENU
0
POPUP
Press to skip backwards or forwards.
Press to move to the Home screen.
Use to enter the Popup menu/Title menu.
Press to search backwards or forwards.
Press to pause a disc.
Press to stop a disc.
Press to use Apps.
TV volume adjustment.
(This button is only available for Samsung
TVs.)
SMART
HOME
HOME
REPEAT
HUB
APPS
TOOLS
INFO
Press to play a disc.
Allows you to repeat a title, chapter,
track or disc.
Use to display the playback information.
Press to use the Tools menu.
Use to select menu items and change
menu values.
Return to the previous menu.
These buttons are used both for menus
on the player and also several Blu-ray
Disc functions.
Press to search contents.
RETURN
A
SEARCH
PANDORA
EXIT
B
C
DIGITAL
SUBTITLE
AUDIO SUBTITLE
Press to exit the menu.
D
FULL
SCREEN
INPUT
Use to access various audio functions on
a disc.
Press to use full screen function.
During the Blu-ray Disc/DVDs playback,
this button does not operate.
Press to switch the Blu-ray Disc/DVD's
subtitle language.
||NOTEs |
\\ If the remote control does not operate properly:
-- Check the polarity +/– of the batteries.
-- Check if the batteries are drained.
-- Check if the remote sensor is blocked by
obstacles.
-- Check if there is any fluorescent lighting nearby.
Installing batteries
||CAUTION |
\\ Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
10
[BD-H6500-XU]AK68-02465G-02ENG-.indd 10
English
2014-05-27 오후 1:38:56
Connections
Connecting to a TV
03 Connections
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your TV.
-- Do not connect the power cord to the wall outlet until you have made all the other connections.
-- When you change the connections, turn off all devices before you start.
Audio
Video
||NOTE |
\\ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the DIGITAL AUDIO
OUT on the product to an audio system to hear audio.
\\ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
\\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
\\ When you connect the product to your TV using the HDMI cable or to a new TV, and then turn it on for the first
time, the product automatically sets the HDMI output resolution to the highest supported by the TV.
\\ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
\\ To view video in the HDMI 720p,1080i,1080p or 2160p output mode, you must use a High speed (category 2)
HDMI cable.
\\ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the
screen.
11
[BD-H6500-XU]AK68-02465G-02ENG-.indd 11
English
2014-05-27 오후 1:38:57
Connections
Connecting to an Audio System
You can connect this product to the audio system using the methods illustrated below.
-- Do not connect the power cord to the wall outlet until you have made all the other connections.
-- When you change the connections, turn off all devices before you start.
Method 1 Connecting to an HDMI supported AV receiver
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to
the HDMI IN jack on your receiver.
• Best quality (Recommended)
Method 2 Connecting to an AV receiver with Dolby Digital or DTS decoder
• Using a digital Optical cable (not supplied), connect the OPTICAL DIGITAL AUDIO OUT jack on
the product to the DIGITAL OPTICAL IN jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
Method 1
Method 2
Audio
Audio
12
[BD-H6500-XU]AK68-02465G-02ENG-.indd 12
English
2014-05-27 오후 1:38:58
Wireless Network
Connecting to a Network Router
Wireless Router
03 Connections
You can connect your product to your network
router using one of the methods illustrated
below.
To use the AllShare network functionality,
you must connect your PC to your network as
shown in the illustrations.
The connection can be wired or wireless.
Wired Network
Broadband
service
Broadband modem
(with integrated router)
Broadband
service
Or
||NOTE |
\\ If your wireless router supports DHCP, this product
can use a DHCP or static IP address to connect to
the wireless network.
\\ Set your wireless router to Infrastructure mode. Adhoc mode is not supported.
\\ The product supports only the following wireless
security key protocols:
-- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Router
Broadband
service
Broadband
modem
||NOTE |
\\ Your router or your Internet Service Provider's
policies may prevent the product from accessing
Samsung's software update server. If this occurs,
contact your Internet Service Provider (ISP) for more
information.
\\ Select a channel on the wireless router that is not
currently being used. If the channel set for the
wireless router is currently being used by another
device nearby, it will result in interference and
communication failure.
\\ If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type on your
router to WEP, TKIP or TKIP-AES (WPS2Mixed), the
product will not support a connection in compliance
with new Wi-Fi certification specifications.
\\ Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (router
performance, distance, obstacles, interference by
other radio devices, etc).
\\ DSL users, please use a router to make a network
connection.
13
[BD-H6500-XU]AK68-02465G-02ENG-.indd 13
English
2014-05-27 오후 1:38:59
Settings
The Initial Settings Procedure
The Home Screen
• The Home screen will not appear if you do not
configure the initial settings.
• The OSD (On Screen Display) may change in this
product after you upgrade the software version.
• The access steps may differ depending on the
menu you selected.
4 5
1
2
PLAY DISC
3
FILMS AND TV SHOWS
MULTIMEDIA
6
APPS
No Disc
After you have connected the product to
your TV, turn on the TV and product. When
you turn on the product the first time, the
product's Initial Settings screen appears on
the TV. The Initial Settings procedure lets you
set the On Screen Display (OSD) and menu
languages, the aspect ratio (screen size), and
network configuration, and connect the player
to the Internet. For complete Initial Settings
instructions, see the Quick Setup Guide.
||NOTE |
\\ If you skip Network Setup during the Initial Settings
procedure, you can configure your network settings
later. See "Configuring Your Network Connection"
on pages 20~23 for instructions.
\\ If you want to display the Initial Settings screen
again and make changes, select Settings > System >
Setup in the Home screen or select the Reset option.
(See pages 18 or 20)
\\ If you want to use an Anynet+(HDMI-CEC) function,
please follow the instructions below.
1)Connect the product to an Anynet+(HDMI-CEC)compliant Samsung TV using HDMI Cable.
2)Set the Anynet+(HDMI-CEC) feature to On in
both the TV and the product.
3)Set the TV to the Initial Settings Procedure.
14
[BD-H6500-XU]AK68-02465G-02ENG-.indd 14
RECOMMENDED
1
MY APPS
2
7
1
3
WebBrowser
2
8
3
Screen Mirroring
Settings
9
0
PLAY DISC : Lets you play photos, videos, or
music content from Disc.
FILMS AND TV SHOWS : Lets you view Films
and TV Shows from the Internet.
2
||NOTE |
\\ Depending on your country, this menu
function may not be supported.
3
MULTIMEDIA : Lets you play photos, videos, or
music content from USB or mobile devices, or PCs.
4
Sign In : Lets you log in with your Samsung account.
5
Search : Lets you search for contents in Films
and TV Shows, Apps and YouTube by entering
corresponding search words.
6
APPS : Gives you access to various applications
you can download.
7
RECOMMENDED : Gives you direct access to
recommended applications.
8
MY APPS : Apps downloaded from My Apps
are displayed.
9
Screen Mirroring : Lets you view the screen of
your smart phone or android tablet on a TV
you have connected to this product.
0
Settings : Opens the product's menu. In the
menu can set various functions to suit your
personal preferences.
English
2014-05-27 오후 1:39:00
SOURCE
VOL
VOL
– + VOL
+–
VOL
2
3
4
5
6
7
8
DISC MENU
9
TITLE MENU
Buttons on the RemotePOPUP
0 Control Used
for the Settings Menu
1
SMART
HOME
HOME
REPEAT
HUB
Accessing the Settings Screen
2
A
Picture
Network
UHD Output
TV Aspect Ratio
16:9 Original
BD Wise
System
Resolution
Auto
Movie Frame (24fps)
Auto
DVD 24fps Conversion
2. To access the menus, sub-menus, and
options on the Settings screen, please refer
to the remote control illustration below.
B
C
AUDIO SUBTITLE
4
D
FULL
PANDORA :DIGITAL
HOME button
PressSUBTITLE
to move to the Home
screen.
2
RETURN button : Press to return to the previous
menu.
3
v (Enter) / DIRECTION buttons :
• Press ▲▼◀▶ to move the cursor or select
an item.
• Press the v button to activate the currently
selected item or confirm a setting.
4
EXIT button : Press to exit the current menu.
Off
Off
EXIT
1
Auto
3D Settings
Smart Hub
Support
RETURN
SEARCH
Picture
INFO
3
Settings
Sound
APPS
TOOLS
1. Select Settings on the Home screen, and
then press v button. The Settings screen
appears.
04 Settings
||NOTE |
\\ If you leave the product in the stop mode for more than
5 minutes without using it, a screen saver will
appear on your TV. If the product is left in the screen
saver mode for more than 20 minutes, the power
will automatically turn off.
SAMSUNG TV
1
SCREEN
INPUT
Detailed Function Information
Each Settings function, menu item, and
individual option is explained in detail onscreen. To view an explanation, use the
▲▼◀▶ buttons to select the function, menu
item, or option. The explanation will usually
appear on the right side of the screen.
A short description of each Settings function
starts on the next page. Additional information
on some of the functions is also in the
Appendix of this manual.
15
[BD-H6500-XU]AK68-02465G-02ENG-.indd 15
English
2014-05-27 오후 1:39:01
Settings
The number indicates the number of lines of
video per frame.
The i and p indicate interlaced and progressive
scan, respectively. Generally, the more lines,
the higher quality.
Settings Menu Functions
Picture
UHD Output
This option outputs HDMI video at UHD
(Ultra High Definition) resolution. This is only
available when Movie Frame is set to Auto.
||NOTE |
\\ To use this feature, you must connect the product
to a device that supports UHD resolution and you
must have content that plays at 24Fs (film speed).
\\ This device cannot play UHD contents However
contents with resolution lower than Full HD can
be up-scaled to UHD.
\\ For UHD resolution output, only 2160*3840 24
frame rate output is available.
3D Settings
Select whether to play a Blu-ray Disc with 3D
contents in 3D Mode.
If you move to the Home or Apps screen
while in 3D mode, the product will switch to
2D mode automatically.
Movie Frame (24fps)
If the product is connected to a 24fps
compatible TV, setting the Movie Frame
(24fps) feature to Auto lets the product adjust
its HDMI output to 24 frames per second
automatically for improved picture quality.
• You can enjoy the Movie Frame (24fps)
feature only on a TV supporting this frame
rate.
• Movie Frame is only available when the
product is in the HDMI 1080i or 1080p
output resolution modes.
DVD 24fps Conversion
Converts DVD playback to 24 frames per
second and outputs it via HDMI. This option is
only available when Movie Frame (24fps) is set
to on.
Fit Screen Size
TV Aspect Ratio
Set the screen to the optimal size. (Apply
Smart Hub, Screen Mirroring only)
Lets you adjust the output of the product to
the screen size and screen format of your TV.
HDMI Colour Format
BD Wise
BD Wise is Samsung's latest inter-connectivity
feature.
When you connect a Samsung product and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the product
and TV, the product outputs video at the
video resolution and frame rate of the Blu-ray
Disc/DVD.
Resolution
Set the output resolution of the HDMI video
signal to BD Wise, Auto, 1080p, 1080i, 720p
or 576p/480p.
16
[BD-H6500-XU]AK68-02465G-02ENG-.indd 16
Lets you set the colour space format for the
HDMI output so that it matches the capabilities
of the connected device (TV, monitor, etc). The
screen goes black momentarily after you have
selected a format.
HDMI Deep Colour
Lets you set the product to output HDMI video
with Deep Colour. Deep Colour provides more
accurate Colour reproduction with greater
Colour depth.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
English
2014-05-27 오후 1:39:01
Sound
You can configure this product to connect to a
Samsung Multiroom Link compatible speaker
wirelessly and enjoy rich sound.
||NOTE |
\\ To use this feature, you must connect at least one
Samsung Multiroom Link speaker.
\\ Sound quality may be affected by the condition
of your wireless network.
\\ The network connection can be negatively
affected and even lost if the network environment
deteriorates over time.
\\ Activating Screen Mirroring disables Multiroom Link.
\\ For further details, refer to the Multiroom
Link manual on the Samsung web site:
www.samsung.com ;
; Search
for Product name: BD-H6500 ; Manuals ;
Multiroom Link ; Download PDF
\\ The audio from each connected device may lag
behind the video and audio of the device which is
playing the source contents.
Digital Output
Lets you select the digital audio output format
that is suitable for your TV or AV Receiver. For
more details, see the digital output selection
table on page 49.
PCM Downsampling
Lets you choose to have 96Khz PCM signals
downsampled to 48Khz before they are
outputted to an amplifier. Choose On if your
amplifier or receiver is not compatible with a
96Khz signal.
Dynamic Range Control
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD
audio.
Auto : Automatically controls the dynamic
range of Dolby TrueHD audio, based on
information in the Dolby TrueHD soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
17
[BD-H6500-XU]AK68-02465G-02ENG-.indd 17
04 Settings
Speaker Settings
Off : Leaves the dynamic range
uncompressed, letting you hear the original
sound.
On : Turns dynamic range control on for all
three Dolby formats. Quieter sounds are
made louder and the volume of loud sounds
is reduced.
Downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the product
downmix to normal stereo or to surround
compatible stereo.
DTS Neo:6 Mode
You can enjoy multichannel sound via HDMI
output from a 2 channel audio source.
Audio Sync
In some cases when the product is connected
to a digital TV, the audio signal may not
synchronize with the video signal. If this
occurs, adjust the audio delay time to match
the video signal.
• You can set the audio delay time between 0
msec and 250 msec. Adjust it to the optimal
setting.
||NOTE |
\\ The audio delay time you specify may not be
exact depending on the played content.
Network
Network Status
Lets you check the current network and
Internet status.
Network Settings
Configure the network connection so you
can enjoy various features such as Internet
services or AllShare functionality, and perform
Software Updates.
English
2014-05-27 오후 1:39:01
Settings
Wi-Fi Direct
VOD Rating Lock
Lets you connect a Wi-Fi Direct device to the
product using a peer-to-pear network, without
the need for a wireless router.
Note that if the product is connected to a
wireless network, it may be disconnected
when you use Wi-Fi Direct.
Lets you lock access to Video on Demand
(VOD) content based on its rating. To use, you
must enter the security PIN.
||NOTE |
\\ Text files, such as files with a .TXT or .DOC
extension, will not display when you are using the
Wi-Fi Direct function.
Multimedia Device Settings
||NOTE |
\\ Depending on your country, this menu function
may not be supported.
Terms & Policy
You must review and agree to both the App
Terms & Conditions and the privacy policy to
use App services.
Samsung account Terms and Conditions,
Privacy Policy
Lets you control which devices on your
network, such as smart phones and tablets,
can share content with your product.
Device Name
You can view and agree to the terms or privacy
policy for your Samsung account and a variety
of other services.
Lets you input a name for the product that will
identify it on your networks.
Reset Smart Hub
BD-Live Settings
Resets all Smart Hub settings to their default
settings. To use, you must enter the security PIN.
Set various BD-Live functions. BD-Live allows
you to access extra features available on
some Blu-ray Discs if you are connected to the
Internet.
BD-Live Internet Connection : Lets you fully
allow, partly allow, or prohibit a BD-Live
Internet connection.
BD Data Management : Manage BD data
downloaded from a BD-Live service or Blu-ray
Disc.
System
Setup
Lets you re-run the Initial Settings procedure.
See the Quick Setup Guide for details.
Quick Start
Lets you set the product to turn on quickly by
decreasing the boot time.
Smart Hub
||NOTE |
\\ If this function is set to On, Standby power
consumption will be increased.
Apps Settings
Lets you configure App notification settings
and view basic info about your Apps.
Push Notification Settings : Receive
notifications from selected services.
18
[BD-H6500-XU]AK68-02465G-02ENG-.indd 18
English
2014-05-27 오후 1:39:01
Security
You can select the language you prefer for the
On-screen menu, disc menu, audio, subtitles,
etc.
• The language you select for the disc menu,
disc audio, or subtitles will only appear if it is
supported on the disc.
The default security PIN is 0000. Enter the
default PIN to access the security function if
you haven't created your own PIN. After you
have accessed the security function for the first
time, change the PIN using the Change PIN
function.
BD Parental Rating : Prevents playback of
Blu-ray Discs with a rating equal to or above
a specific age rating you have set unless you
enter the PIN.
DVD Parental Rating : Prevents playback
of DVDs with a rating above a specific
numerical rating you have set unless you
enter the PIN.
Change PIN : Change the 4-digit PIN used to
access security functions.
Device Manager
You can connect a wireless USB keyboard or
mouse to the USB port on the front of the
product.
Keyboard Settings : Lets you configure a
wireless USB keyboard connected to the
product.
||NOTE |
\\ You can use the keyboard only when a QWERTY
keyboard screen or window appears in the Web
Browser.
Mouse Settings : Lets you configure a
wireless USB mouse connected to the
product. You can use the mouse in the
product's menu and the Web Browser in the
same way you use a mouse on your PC.
`` To use a mouse with the product's menu:
1. Connect the USB mouse to the product.
2. Click the primary button you selected
in Mouse Settings. The Simple Menu
appears.
3. Click the menu options you want.
||NOTE |
\\ Some USB HID keyboards and mice may not be
compatible with your product.
\\ Some HID keyboard keys may not work.
\\ Wired USB keyboards are not supported.
`` If you forget your PIN:
1. Remove any disc or USB storage device.
2. Press and hold the @ button on the top
panel for 5 seconds or more.
The initialization message appears on
the screen, and the power will turn off
automatically.
When you turn your product on again,
all the settings will be reset.
General
You can change the options listed below to
match your preferences.
Front Display : Change the brightness of the
front panel.
Time Zone : Select the time zone in which
you live.
Menu Transparency : Lets you adjust the
transparency of the menu box.
Anynet+ (HDMI-CEC)
\\ Some applications may not be supported.
Anynet+ is a convenient function that offers
linked operations with other Samsung product
that have the Anynet+ feature and lets you
control those products with one Samsung TV
remote. To operate this function, you must
connect this product to an Anynet+ Samsung
TV using an HDMI cable.
\\ If a wireless HID Keyboard does not operate
because of interference, move the keyboard
closer to the product.
19
[BD-H6500-XU]AK68-02465G-02ENG-.indd 19
04 Settings
Language
English
2014-05-27 오후 1:39:01
Settings
Networks and the Internet
DivX® Video On Demand
When you connect this product to a network,
you can use network based applications and
functions such as Smart Hub and BD-LIVE, and
upgrade the product's software through the
network connection. For more information
about accessing and using Internet services,
see the Network Services chapter of this
manual on pages 37~45. Instructions for
configuring the network connection start
below.
View DivX® VOD Registration Codes to
purchase and play DivX® VOD contents.
Support
Remote Management
When activated, lets Samsung Call Centre
agents diagnose and fix problems with your
player remotely. Requires an active Internet
connection.
Configuring Your Network Connection
||NOTE |
\\ Remote Management service might not be
available in some countries.
\\ To use Remote Management:
1)Call the Samsung Contact Centre and ask for
remote support.
2)Open the player's menu on your TV and go to
the Support section.
3)Select Remote Management, and then read
and agree to the service agreements. When
the PIN screen appears, provide the PIN
number to the agent.
4)The agent accesses your player.
Before you begin, contact your ISP to find
out if your IP address is static or dynamic. If it
is dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired network,
connect the product to your router using a
LAN cable before you start the configuration
procedure.
If you are connecting to a wireless network,
disconnect any wired network connection
before you begin.
To begin configuring your network connection,
follow these steps:
Wired Network
Software Update
The Software Update menu allows you to
upgrade the product's software for performance
improvements or additional services.
Wired - Automatic
1. In the Home screen, select Settings, and
then press the v button.
2. Select Network, and then press the v
button.
Contact Samsung
Provides contact information for assistance
with your product.
3. Select Network Settings, and then press
the v button.
4. Select Wired in the Network Settings
screen, and then press the v button.
Reset
Resets all settings to their default settings
except for the network and Smart Hub
settings, and then starts the Setup function.
To use, you must enter the security PIN. The
default security PIN is 0000.
5. Select the Connect button, and then press
the v button. The product detects the
wired connection, verifies the network
connection and then connects to the
network.
20
[BD-H6500-XU]AK68-02465G-02ENG-.indd 20
ĞĞ
English
2014-05-27 오후 1:39:01
ĞĞ
Wireless Network
Wired - Manual
1. Select Network Status. The product
searches for a network, and then displays
the connection failed message.
2. On the bottom of the screen, select IP
Settings, and then press the v button.
The IP Settings screen appears.
3. Select the IP Setting field, and then press
the v button.
4. Select Enter manually in the IP Setting
field, and then press the v button.
5. Select a value to enter (IP Address, for
example), and then press the v button.
Use the number keypad on your remote
control to enter the numbers for the value.
You can also enter numbers using the
▲▼ buttons. Use the ◀▶ buttons on the
remote control to move from entry field
to entry field within a value. When done
with one value, press the v button.
6. Press the ▲ or ▼ button to move to
another value, and then enter the
numbers for that value following the
instructions in Step 5.
You can set up a wireless network connection
in four ways:
-- Wireless Automatic
-- Wireless Manual
-- WPS(PBC)
-- WPS(PIN)
When you configure the wireless network
connection, any wireless network devices
currently connected through the product
or, if applicable, the product's current wired
connection, will be disconnected.
ĞĞ
Wireless - Automatic
1. In the Home screen, select Settings, and
then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then press
the v button.
4. Select Wireless in the Network Settings
screen, and then press the v button. The
product searches for and then displays a
list of the available networks.
Network Settings
Select your network type.
Network type
7. Repeat Steps 5 and 6 until you have filled
in all values.
Wireless
Wireless network
||NOTE |
You can connect your Bluray player to the internet.
Please select which wireless
network to use.
iptime23
iptime
\\ You can get the Network values from your Internet
provider.
8. When finished entering all the values,
select OK, and then press the v
button. The product verifies the network
connection and then connects to the
network.
21
[BD-H6500-XU]AK68-02465G-02ENG-.indd 21
04 Settings
If you have a static IP address or the Automatic
procedure does not work, you'll need to set
the Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic,
and then follow these steps:
solugen_edu#2
Refresh
WPS(PBC)
5. Select the desired network, and then press
the v button.
6. On the Security screen, enter your
network's Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with an arrow
button, and then pressing v button.
English
2014-05-27 오후 1:39:01
Settings
||NOTE |
\\ To view the password as you enter it, use the arrow
buttons to select Show Password on the right side,
and then press v button.
7. When finished, select Done and then press
the v button. The product verifies the
network connection and then connects to
the network.
8. When verification is complete, select OK,
and then press the v button.
||NOTE |
\\ You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set
up your router or modem.
ĞĞ
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set
the Network Settings values manually.
1. Follow the directions in Wireless Automatic through Step 5.
||NOTE |
\\ You can get the Network values from your Internet
provider.
9. When finished, select OK, and then
press the v button. The Security Screen
appears.
10. On the Security screen, enter your
network's Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with the
▲▼◀▶ buttons, and then pressing the
v button.
11. When finished, select Done at the right of
the screen, and then press the v button.
The product verifies the network connection
and then connects to the network.
12. After the product verifies the network,
select OK, and then press the v button.
ĞĞ
2. The product searches for a network,
and then displays the connection failed
message.
3. On the bottom of the screen, select IP
Settings, and then press the v button.
The IP Settings screen appears.
4. Select the IP Setting field, and then press
the v button.
5. Select Enter manually in the IP Setting
field, and then press the v button.
6. Select a value to enter (IP Address, for
example), and then press v button.
Use the number keypad on your remote
control to enter the numbers for the value.
You can also enter numbers using the
▲▼ buttons. Use the ◀▶ buttons on the
remote control to move from entry field
to entry field within a value. When done
with one value, press the v button.
7. Press the ▲ or ▼ button to move to
another value, and then enter the
numbers for that value following the
instructions in Step 6.
WPS(PBC)
1. In the Home screen, select Settings, and
then press the v button.
2. Select Network, and then press the v
button.
3. Select Network Settings, and then press
the v button.
4. Select Wireless in the Network Settings
screen, and then press the v button.
5. Press the ▲ button on your remote, and
then press the ▶ button to select the
WPS(PBC).
6. Press the v button on your remote. The
"Press the PBC button on your wireless
router within the next two minutes."
message appears.
7. Press the WPS(PBC) button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to
your network.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.
8. Repeat Steps 6 and 7 until you have filled
in all values.
22
[BD-H6500-XU]AK68-02465G-02ENG-.indd 22
English
2014-05-27 오후 1:39:02
ĞĞ
WPS(PIN)
2. In the Home screen, select Settings, and
then press the v button.
1. In the Home screen, select Settings, and
then press the v button.
3. Select Network, and then press the v
button.
2. Select Network, and then press the v
button.
4. Select Wi-Fi Direct, and then press the v
button.
The Wi-Fi Direct devices that you can
connect appear.
3. Select Network Settings, and then press
the v button.
4. Select Wireless in the Network Settings
screen, and then press the v button.
The product searches for and then displays
a list of the available networks.
5. Select the desired network, and then press
the ▶ button.
6. Select the WPS(PIN), and then press the
v button. The PIN pop-up appears.
7. Enter the PIN into the WPS PIN entry field
in the router's Set Up screen and then
save the the screen.
||NOTE |
\\ Contact the manufacturer of the router for
instructions explaining how to access the route's Set
Up screens or refer to the router's user's manual.
||NOTE |
\\ The current wired or wireless network connection
will be disconnected when you use the Wi-Fi Direct
function.
\\ Text files, such as files with a .TXT or .DOC
extension, will not display when you are using the
Wi-Fi Direct function.
Upgrading Software
The Software Update menu allows you to
upgrade the product's software for performance
improvements or additional services.
• Never turn the product off or back on manually
during the update process.
\\ For a WPS connection, set your wireless router's
security encryption method to AES. WPS connections
do not support WEP security encryption.
1. In the Home screen, select the Settings,
and then press the v button.
Wi-Fi Direct
2. Select Support, and then press the v
button.
The Wi-Fi Direct function allows you to
connect Wi-Fi Direct devices to the product
and each other using a peer-to-peer network,
without a wireless router.
||NOTE |
\\ Bluetooth transmissions can interfere with the WiFi Direct signal. Before you use the Wi-Fi Direct
function, we strongly recommend that you turn off
the Bluetooth function of any active mobile device.
23
[BD-H6500-XU]AK68-02465G-02ENG-.indd 23
04 Settings
Before you begin, open the router's setup
menu on your PC and access the screen with
the WPS PIN entry field.
1. Turn on the Wi-Fi direct device and
activate its Wi-Fi Direct function.
3. Select Software Update, and then press
the v button.
4. To download update software and update
now, select Update Now, and then press
the v button.
5. To let the product download update
software automatically when available,
select Auto Update, and then press the
v button. See "Auto Update" on page
24 for details.
English
2014-05-27 오후 1:39:02
Settings
||NOTE |
\\ The upgrade is complete when the product turns
off, and then turns on again by itself.
Auto Update
\\ Samsung Electronics shall takes no legal
responsibility for product malfunction caused by
an unstable Internet connection or consumer
negligence during a software Update.
You can set the Auto Update function so that
the product downloads new upgrade software
when it is in Auto Update mode.
This allows the product to download upgrade
software automatically, when you are not
using it.
\\ If you want to cancel the upgrade while the upgrade
software is downloading, press the v button.
1. Press the ▲▼ buttons to select Auto
Update, and then press the v button.
\\ When a system upgrade is in progress, "UPDATE" is
displayed on the front panel.
Update Now
You can use Update Now to update the
software through your network connection
or by using a USB flash drive. The network
instructions are below. The USB flash drive
instructions are on the next page.
1. Select Update Now, and then press the
v button.
The Update now pop-up appears.
2. The product searches on line for the latest
software version.
3. If it finds a new version, the Update
Request pop-up appears.
2. Select On / Off.
||NOTE |
\\ To use the Auto Update Mode Upgrade function,
your product must be connected to the Internet.
Update by USB
To upgrade by USB, follow these steps:
1. Visit www.samsung.com.
2. Click SUPPORT on the top right of the
page.
3. Enter the product's model number into
the search field. As you enter the model
number, a drop down will display products
that match the model number.
4. Left click your product's model number in
the drop down list.
4. Select OK. The product upgrades the
software, turns off, and then turns on
automatically.
5. If you do not select OK or Cancel in one
minute, the product stores the new
upgrade software. You can upgrade the
software later using Auto Update.
6. If you select Cancel, the product cancels
the upgrade.
||NOTE |
\\ When the system upgrade is done, check the
software details in the Product Information section
of the Contact Samsung screen.
5. On the page that appears, scroll down
to and then click Firmware Manuals &
Downloads.
6. Click Firmware in the centre of the page.
7. Click the ZIP button in the File column on
the right side of the page.
8. Click Send in the first pop-up that
appears. Click OK in the second pop-up
to download and save the firmware file to
your PC.
\\ Do not turn off the product during the Software
Update. It may cause the product to malfunction.
24
[BD-H6500-XU]AK68-02465G-02ENG-.indd 24
English
2014-05-27 오후 1:39:02
9. Unzip the zip archive to your computer.
You should have a single folder with the
same name as the zip file.
04 Settings
10. Copy the folder to a USB flash drive.
11. Make sure no disc is inserted in the
product, and then insert the USB flash
drive into the USB port of the product.
12. In the product’s menu, go to Settings >
Support > Software Update.
13. Select Update Now.
14. The product searches for the software on
the USB drive. When it finds the software,
the Update Request pop-up appears.
15. Select OK. The product upgrades the
software, turns off, and then turns on
automatically.
||NOTE |
\\ There should be no disc in the product when you
upgrade the software using the USB jack.
\\ When the system upgrade is done, check the
software details in the Product Information section
of the Contact Samsung screen.
\\ Do not turn off the product during the Software
Update.
It may cause the product to malfunction.
\\ Software Updates using the USB jack must be
performed with a USB flash memory stick only.
25
[BD-H6500-XU]AK68-02465G-02ENG-.indd 25
English
2014-05-27 오후 1:39:02
Media Play
Your product can play content located on Bluray/DVD/CD discs, USB devices, and PCs. To
play content located on your PC, you must
connect your PC and the product to your
network and Visit the http://link.samsung.com
site to download and install the Samsung-link
program.
||NOTE |
\\ You can play contents on your PC using
other programs compatible with Allshare
network software, however, we recommend
that you use Allshare network software.
Playing Commercial Discs
1. Press the 8 button to open the disc tray.
2. Place a disc gently into the disc tray with
the disc’s label facing up.
• Cleaning Discs
-- If you get fingerprints or dirt
on a disc, clean it with a mild
detergent diluted in water and
wipe with a soft cloth.
-- When cleaning, wipe gently from the
inside to the outside of the disc.
• Disc Storage
`` Do not keep in direct sunlight.
`` Keep in a cool ventilated area.
`` Keep in a clean protection jacket and
store vertically.
Playing Photos, Videos, and Music
(Multimedia)
You can play media content saved on a USB
device, smartphone, camera, computer, or
cloud service on the product.
||NOTE |
\\ However, you cannot play media content
if the content or the storage device are not
supported by the product.
\\ Backup important files before connecting
a USB device. Samsung shall not be held
responsible for damaged or lost files.
3. Press the 8 button to close the disc tray.
Playback starts automatically.
4. If playback does not start automatically,
press the 6 button on the remote
control.
Disc Storage & Management
• Holding Discs
-- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
-- Avoid touching the surface of a disc where
data has been recorded.
-- Hold the disc by the edges so that
fingerprints will not get on the surface.
-- Do not stick paper or tape on the disc.
26
[BD-H6500-XU]AK68-02465G-02ENG-.indd 26
Playing Media Content Saved on a USB
Device
1. Connect your USB device to the product.
2. Press the HOME button and select
Storage in the MULTIMEDIA panel. The
USB devices connected to the product are
listed.
3. Select the device you wish to connect to.
The folders and files in the selected USB
are listed.
4. Select the media content you wish to play
from the list. The media content plays.
||NOTE |
\\ Alternatively, move to the media content to play and
press the 6 button to play the content.
English
2014-05-27 오후 1:39:03
5. To exit, press the 5 button or RETURN
button.
Playing Media Content Saved in a
Computer/Mobile Device
You can play media content on the product
with a computer or mobile device connected
to the same network as the product.
||NOTE |
\\ Only available with Samsung phones supporting
DLNA functionality.
\\ Samsung Link software should have been installed
on the computer. The mobile device should
support Samsung Link. For more information, visit
Samsung’s content and service portal at http://
link.samsung.com.
\\ You may experience compatibility issues when
attempting to play media files via a third-party DLNA
server.
\\ However, the content shared by a computer or
a mobile device may not play depending on the
encoding type and file format of the content. In
addition, some functions may not be available.
\\ The media content may not smoothly play
depending on the network status. If this is the case,
use a USB storage device.
1. Connect the smart device and product.
2. Press the HOME button and select
Network Device in the MULTIMEDIA
panel. Storages devices connected to the
same network of the product are listed.
3. Select a desired storage device. The
folders and files shared by the selected
storage device are listed.
4. Select the media content you wish to play
from the list. The media content plays.
||NOTE |
\\ Alternatively, move to the media content to play and
press the 6 button to play the content.
(HOME → Settings → Network → Multimedia
Device Settings)
To play the media content stored on a mobile
device, you must allow the connection
between the mobile device and the product.
||NOTE |
\\ You can connect to a mobile device on any DLNA
DMC device. DLNA DMC function enables users to
connect a mobile device to the product, search for
media content, and control play operations on the
product.
05 Media Play
||NOTE |
\\ If you connect a USB device to the product while
watching the product, a popup window appears on
the screen so that you can easily navigate the folders
and files of the USB device.
Allowing Connection with a Mobile
Device
1. Navigate to Settings > Network and select
Multimedia Device Settings. The mobile
devices connected to the same network as
the product are listed.
2. Allow connection with the device you
wish to connect to the product. You can
only play media files from devices that
have been allowed to connect to the
product.
||NOTE |
\\ If a mobile device requests the media content to
play, the connection confirmation window appears
on the product so that you can easily connect a
mobile device.
Playing a Disc with User Recorded
Content
You can play multimedia files you have
recorded on Blu-ray, DVD, or CD discs.
1. Place a user recorded disc into the disc
tray with the disc’s label facing up, and
then close the tray. The Device Connected
pop-up appears.
2. Use the ▲▼ buttons to select the type of
content you want to view or play All Content, Photos, Videos or Music - and
then press the v button.
5. To exit, press the 5 button or RETURN
button.
27
[BD-H6500-XU]AK68-02465G-02ENG-.indd 27
English
2014-05-27 오후 1:39:03
Media Play
||NOTE |
\\ Even though the product will display folders for all
content types, it will only display files of the Content
Type you selected in Step 2. For example, if you
selected music, you will only be able to see music
files. You can change this selection by returning to
the MULTIMEDIA screen and repeating Step 2.
3. A screen appears listing the contents of
the disc. Depending on how the contents
are arranged, you will see either folders,
individual files, or both.
4. If necessary, use the ▲▼◀▶ buttons to
select a folder, and then press the v
button.
5. Use the ▲▼◀▶ buttons to select a file
to view or play, and then press the v
button.
6. Press the RETURN button one or more
times to exit a current screen, exit a folder,
or to return to the Home screen.
Press the EXIT button to return directly to
the Home Screen.
7. Go to pages 29~35 for instructions that
explain how to control playback of videos,
music, and pictures on a disc.
Playing Media Content Saved in a
Cloud Service
Cloud service saves user content such as
photos, videos, and music files on a server
so that it can be played on the product
connected to the network. You can view the
media content saved in a cloud service such as
Dropbox and OneDrive on the product.
2. Select a desired cloud service. The folders
and files in the selected cloud service are
listed.
3. Select media content you wish to play
from the list. The media content plays.
||NOTE |
\\ Alternatively, move to the media content to play and
press the 6 button to play the content.
4. To exit, press the 5 button or RETURN
button.
||NOTE |
\\ A Samsung smart device or a PC installed with the
Samsung Link app can be connected to the Blu-ray
product through a remote network.
\\ To connect devices through a remote network, the
same Samsung Account should be used to log in for
both this Blu-ray product and the device running the
Samsung Link app.
\\ For more information, visit the Samsung Content &
Service portal (http://link.samsung.com).
Samsung Link
For more information, visit the Samsung Content
& Service portal (http://link.samsung.com).
||NOTE |
\\ You may experience compatibility issues when
attempting to play media files via a third-party DLNA
server.
||NOTE |
\\ To play the content in a cloud service, you must log
into your Samsung account and link the Samsung
account to the cloud service account. For the
information about linking your Samsung account to
a cloud service account, see page 45.
1. Press the HOME button and select Cloud
Service in the MULTIMEDIA panel. The
cloud services linked with your Samsung
account appears.
28
[BD-H6500-XU]AK68-02465G-02ENG-.indd 28
English
2014-05-27 오후 1:39:03
SOURCE
Controlling Video Playback
VOL
1
2
3
4
5
6
7
8
Buttons on the Remote Control used for Video Playback
DISC MENU
9
SMART
POPUP
HOME
HOME
APPS
TOOLS buttons
INFO
Playback related
The product does not play sound in Search,
Slow or Step mode.
speed
• To return to normal
RETURN
EXITplayback, press
the 6 button.
6 button
A
B
C
D
PANDORA
DIGITAL
SUBTITLE
INPUT
DISC MENU
button
During playback, press this button to
display the Disc menu.
TITLE MENU
button
During playback, press this button to
display the Title menu.
• If your disc has a playlist, press the
View to go to the playlist.
POPUP MENU During playback, press this button to
button
display the Popup menu.
Using the Settings Menu (During the
Playback)
StartsAUDIO
playback.
SUBTITLE LIGHT
SEARCH
Using the disc menu, title menu, popup
menu, and title list
REPEAT
HUB
„„
„„
TITLE MENU
0
05 Media Play
VOL
– + VOL
+ –of video content located on a Disc, USB, mobile device or PC.
You can control the VOL
playback
Depending on the disc or TVcontents, some of the functions described in this manual may not be available.
5 button
Stops playback.
7 button
Pauses playback.
Fast Motion
Play
During playback, press the 3 or 4
button.
Each time you press the 3 or 4
button, the playback speed will
change.
Slow Motion
Play
In pause mode, press the 4 button.
Each time you press the 4 button,
the playback speed will change.
Step Motion
Play
In pause mode, press the 7 button.
Each time you press the 7 button, a
new frame appears.
Skip Motion
Play
During playback, press the 1 or 2
button.
Each time you press 1 or 2 button,
the disc moves to the previous or next
chapter or file.
During playback or in pause mode, press the
TOOLS button.
Use the ▲▼◀▶ buttons to select the
button, and then press the E button.
Play from the
beginning
Select to return to the beginning of
the movie, and then press the v
button.
-- Search Titles : If there is more
than one movie on the disc or
device, select to start a different
title.
1. Select Search Titles, and
then press the v button.
Select Scene
2. Use the ▲▼ buttons to
select a title, and then
press the v button.
-- Chapter Search : Select to play
the chapter of your choice.
1. Select Chapter Search, and
then press the v button.
2. Use the ▲▼ buttons to
select a chapter, and then
press the v button.
29
[BD-H6500-XU]AK68-02465G-02ENG-.indd 29
English
2014-05-27 오후 1:39:04
Media Play
-- Search Time Bar : Select to play
the movie from a selected time
point.
1. Select Search Time Bar, and
then press the v button.
2. Using the number buttons,
enter the time point you
want to go to, and then
press the v button.
Select Scene
||NOTE |
\\ You can also use the ◀▶
buttons to advance or rewind
the movie. The movie advances
or rewinds one minute each
time you press the ◀▶ buttons.
\\ If the index information in the
file is damaged or the file does
not support indexing, you will
not be able to use the Select
Scene function.
\\ If you run files on network
device after you have connected
the player to a computer on
your network, Select Scene may
not work.
Use the 3D menu when playing a
3D file.
Search
-- Search Scene : You can use the
Search Scene function during
playback to view or start a movie
from the scene of your choice.
-- Search Titles : If there is more
than one movie on the disc or
device, select to start a different
title.
-- Search Time Bar : Select to play
the movie from a selected time
point.
Subtitle Settings
Lets you set the desired subtitle
options.
Repeat mode
Lets you repeat a title, chapter, or
specific section.
Rotate
Lets you rotate the picture.
Full Screen
Lets you set the size of the video image.
Picture Mode
||NOTE |
\\ The 3D menu becomes available
only when you are playing a 3D
video file.
3D
\\ When playing a 3D video, set
the player to Side by Side or Top
and Bottom in 3D Settings so
that the player's settings match
the 3D content format.
\\ If you move to the Home or
Smart Hub Home screen while
in 3D mode, the product will
switch to 2D automatically.
30
[BD-H6500-XU]AK68-02465G-02ENG-.indd 30
Lets you set the picture mode.
-- Dynamic : Increases sharpness
and brightness.
-- Standard : Choose this setting
for most viewing applications.
-- Movie : The best setting for
watching movies.
-- User : Lets you adjust the
sharpness and noise reduction
function respectively.
||NOTE |
\\ When you use the BD wise function,
this menu will not appear.
Audio
Use to set the desired audio language.
Audio Sync
Select to set the audio sync.
Subtitle
Use to set the desired subtitle
language.
Angle
Lets you view a scene from another
angle. The Angle option displays the
number of angles available to view.
When a Blu-ray Disc/DVD contains
multiple angles of a particular
scene, you can change angle.
Information
Lets you view video file information.
English
2014-05-27 오후 1:39:04
BONUSVIEW
Video
||NOTE |
\\ Depending on the disc or storage device, the
Settings menu may differ.
You can control the playback of music content
located on a Disc, USB, mobile device or PC.
Depending on the disc or contents, some of
the functions described in this manual may not
be available.
SOURCE
\\ Video files with high bitrates of 20Mbps or more
strain the product's capabilities and may stop playing
during playback.
Using the View & Options Menus
Buttons on the Remote Control used
for Music Playback
– + VOL
+–
VOL
VOL
1
Using the View Menu
Groups all the the photo files on
the media or storage device by
date. Click a group to see the
videos in that group.
Title
Displays all the video files on the
media or storage device by title.
Folder
Displays all the folders on the media
or storage device in alphabetical
order.
||NOTE |
\\ Depending on the disc or storage device, the View
menu may differ or not appear.
Using the Options Menu
On a file screen containing video files, select
and then press the v button.
Play Selected
Play Selected lets you select specific
file to play. It works essentially the
same for all media.
Send
Select Send to upload selected files
to a web site (Picasa, Facebook etc)
or device. To use Send, you need
to establish an account with the
on-line site, and then log in using
the Log In function. See "Using the
Send Function" on page 36.
31
[BD-H6500-XU]AK68-02465G-02ENG-.indd 31
2
4
5
7
8
DISC MENU
On a file screen containing video files, select
and then press the v button.
Date
1
2
3
SMART
0
HOME
HOME
HUB
VOL
TV
3
6
9
TITLE MENU
POPUP
REPEAT
APPS
TOOLS
4
5
6
INFO
1
NUMBER buttons : Press the number of a
track. The selected track is played.
2
12 button : Moves to the previous/next
RETURN
EXIT
track.
3
5 button :AStopsB a track.
C
SEARCH
05 Media Play
BONUSVIEW
Audio
Controlling Music Playback
Use to set the desired bonusview
option.
D
AUDIO SUBTITLE LIGHT
4
PANDORA DIGITAL
SUBTITLE INPUT only)
Fast Play (Audio
CD (CD-DA)
During playback, press the 3 or 4 button.
Each time you press the 3 or 4 button, the
playback speed will change.
5
7 button : Pauses a track.
6
6 button : Plays the currently selected track.
||NOTE |
\\ If you don't press a button within five seconds of
inserting an Audio CD, the screen is displayed in Full
Screen mode.
To go back to the Play List screen, press the RETURN
button on the remote control.
English
2014-05-27 오후 1:39:04
Media Play
Using the Options Menu (During the
Playback)
On the music file playback screen, use the
button, and
▲▼◀▶ buttons to select the
then press the v button.
Play Selected
Lets you create a playlist by
selecting specific tracks to play. It
works essentially the same way for
all media. See "Creating a Playlist
on an Audio CD" on page 33.
Ripping
The Ripping function converts CD
audio to the mp3 format and saves
the converted files on a USB device
or a mobile device connected to the
product. See "Ripping" on pages
33~34.
Information
Select to see the (Contents)
information.
Using the View & Options Menus (On a
file screen)
Using the View Menu
On the playback screen, select the
and then press the v button.
button
Track
Displays all the music tracks on
the media or storage device in
alphabetical order.
Album
Displays all music on the media or
storage device by album
Artist
Displays all the the music files on
the media or storage device by artis
Genre
Displays all the music on the media
or storage device by genre.
Folder
Displays all the folders on the media
or storage device.
||NOTE |
\\ Depending on the disc or storage device, the View
menu may differ or not appear.
||NOTE |
\\ Depending on the disc or storage device, the
Settings menu may differ or not appear.
Using the Options Menu
On playback screen or a file screen containing
and then press the v
music files, select
button.
Play Selected
Play Selected lets you select specific
tract to play. It works essentially the
same for all media.
See the "Repeating tracks on an
Audio CD" on page 33.
Send
Select to send selected files to
other devices. See "Using the Send
Function" on page 36.
Encoding
Select to manage the text encoding
options.
||NOTE |
\\ Depending on the disc or storage device, the
Options menu may differ or not appear.
32
[BD-H6500-XU]AK68-02465G-02ENG-.indd 32
English
2014-05-27 오후 1:39:05
Repeating Tracks on an Audio CD
1. On the Playback screen, use the ▲▼◀▶
in the lower left
buttons to select
corner of the screen, and then press the
v button.
2. Use the ▲▼ to select the repeat mode
you want - Off, One Song, or All - and
then press the v button.
TRACK 001
00:00:39 00:02:38
TRACK 001
00:43
TRACK 002
03:56
TRACK 003
04:41
TRACK 004
04:02
TRACK 005
03:43
TRACK 006
03:40
TRACK 007
04:06
TRACK 008
03:52
TRACK 009
03:04
TRACK 010
04:02
Shuffling Tracks on an Audio CD
You can set the product to play tracks on an
audio CD (CD-DA/MP3) at random.
1. On the Playback screen, use the ▲▼◀▶
in the lower left
buttons to select
corner of the screen, and then press the
v button.
2. Use the ▲▼ to set the Shuffle mode On
or Off, and then press the v button.
Creating a Playlist from an Audio CD
1. With the Playback screen displayed, select
button, and then press the v
the
button. The Settings menu appears.
2. Use the ▲▼ buttons to select Play
Selected, and then press the v button.
The Selection Play screen appears.
3. Use the ▲▼ buttons to select a track,
and then press the v button. A check
appears to the left of the track.
33
[BD-H6500-XU]AK68-02465G-02ENG-.indd 33
5. To remove a track from the list, move to
the track, and then press the v button
again.
The check on the track is removed.
6. When done, press the ▲▼ button to
select Play, and then press the v button.
The Music Playback screen reappears
listing only the tracks you checked. The
selected tracks play automatically.
05 Media Play
You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
4. Repeat Step 3 to select and check
additional tracks.
||NOTE |
\\ You can create a playlist with up to 99 tracks on
Audio CDs (CD-DA).
\\ On the Selection Play screen, you can also choose
Select All, Clear All, and Cancel.
-- Use Select All to select all tracks. This cancels your
individual track selections. When you press the
RETURN button on your remote control or select
the Play button, and then press the v button, all
tracks will appear on the Music Playback screen,
and the product will begin to play all tracks from
Track 001.
-- Use Clear All to deselect all selected tracks at
once. Then, select individual tracks or use Select
All to select all the tracks, and then press the
RETURN button on your remote control. If you do
not use Select All or select individual tracks, the
Playlist will not change.
-- Cancel cancels any changes you made on the Play
Select screen. When you return to the Playback
screen, the Playlist will be unchanged.
Ripping
1. Insert a USB device into the USB jack on
the front of the product.
2. With the Playback screen displayed, select
button and then press the v
the
button. The Settings menu appears.
3. Use the ▲▼ buttons to select Ripping,
and then press the v button. The
Ripping screen appears.
English
2014-05-27 오후 1:39:06
Media Play
4. Use the ▲▼ buttons to select a track,
and then press the v button. A check
appears to the left of the track.
5. Repeat Step 3 to select and check
additional tracks.
6. To remove a track from the list, move to
the track, and then press the v button
again.
The check on the track is removed.
7. When done, select the Rip button using
the ▲▼ buttons, and then press the v
button. The Rip pop-up appears.
8. Use the ▲▼ buttons to select the device
to store the ripped files to, and then press
the v button.
||NOTE |
\\ Do not disconnect the device while ripping is in
progress.
9. If you want to cancel ripping, press the
v button and then select Yes. Select No
to continue ripping.
Playing Photo Contents
You can play photo contents located on a
DVD, USB, mobile device or PC.
Using the Tools Menu (During Playback)
During playback or in pause mode, press the
TOOLS button.
Use the ▲▼◀▶ buttons to select the
button, and then press the v button.
Slideshow
Settings
Select to change the Slide Show
settings.
-- Speed : Select to set the slide
show speed.
-- Effect : Select to set the slide
show effect.
Rotate
Select to rotate the picture. (This
can rotate the picture either
clockwise or counter clockwise.)
Zoom
Select to enlarge the current
picture. (Enlarge up to 4 times)
10. When ripping is complete, the
"Successfully Ripped." message appears.
Press the v button.
11. Press the RETURN button or select Cancel,
and then press the v button to go back
to the Playback screen.
||NOTE |
\\ This function does not work with DTS Audio CD.
Picture Mode
\\ This function may not be supported by some discs.
Select to set the picture mode.
-- Dynamic : Choose this setting to
increase Sharpness.
-- Standard : Choose this setting
for most viewing applications.
-- Movie : This is the best setting
for watching movies.
-- User : Lets you adjust the
sharpness and noise reduction
function respectively.
\\ On the Ripping screen, you can also choose Select
All and Clear All.
||NOTE |
\\ This menu can not be displayed
when you use the BD Wise
function.
\\ Use Select All to select all tracks and press the v
button. This cancels your individual track selections.
Select to listen to music while
viewing a slide show.
\\ Ripping encodes music into the .mp3 format at
192kbps.
\\ Use Clear All to deselect all selected tracks at once.
34
[BD-H6500-XU]AK68-02465G-02ENG-.indd 34
Background
Music
||NOTE |
\\ The number of music files
searched from the external
device may differ from devices.
Send
Select to send the selected file to
other devices.
Information
Select to see the (Contents)
information.
English
2014-05-27 오후 1:39:06
\\ To enable the background music function, the
photo file must be in the same storage media
as the music file.
Note that the sound quality can be affected
by the bitrate of the MP3 file, the size of the
photo, and the encoding method.
Using the Options Menu
On a file screen containing photo files, select
and press the v button.
the
Slide show
Starts the slide show. Shows all the
files in the current folder, one after
another. If you want to create a
slide show with a selected group of
photos, see Play Selected below.
Play Selected
Play Selected lets you select specific
photo to see. It works essentially
the same for all media.
See "Creating a Playlist from
an Audio CD" on page 33 for
instructions.
Send
Select Send to upload selected files
to a web site (Picasa, Facebook etc)
or device. To use Send, you need to
establish an account with the online site, and then log in using the
Log In function.
See "Using the Send Function" on
page 36.
\\ You can't enlarge the subtitle and PG graphic in the
full screen mode.
Using the View & Options Menus
Using the View Menu
On a file screen containing photo files, select
button and then press the v button.
the
Date
Groups all the the photo files on
the media or storage device by
date. Click a group to see the
photos in that group.
Title
Displays all the photo files on the
media or storage device by title.
Folder
Displays all the folders on the media
or storage device.
||NOTE |
\\ Depending on the disc or storage device, the View
menu may differ or not appear.
35
[BD-H6500-XU]AK68-02465G-02ENG-.indd 35
05 Media Play
||NOTE |
\\ Depending on the disc or storage device, the Tools
menu may differ. All options may not be displayed.
||NOTE |
\\ Depending on the disc or storage device, the
Settings menu may differ or not appear.
English
2014-05-27 오후 1:39:06
Media Play
7. Select a destination, and then press the
v button.
Send files
8. If you are sending the files to an on-line
site, the site starts. Log in and follow the
directions on the screen.
Copying Videos, Music or Photos
Contents
DISC/
Network
Device/
Cloud
Service 
USB
DISC/USB/
Cloud
Service 
Network
Device
DISC/USB/
Network
Device
 Cloud
Service
Music
Supported
Supported
Supported
Photos
Supported
Supported
Supported
Videos
Supported
Supported
Supported
||NOTE |
\\ To send files to an on-line site you must have an
account with that site.
• Disc (CD-DA/CD-R/CD-RW, DVD±R(Finalise)/
DVD+RW/DVD-RW(Finalise))  USB
• PTP USB is not available when you copy to
USB.
Using the Send Function
You can upload files to an Network Device,
Cloud Service or a device.
1. With the Videos, Music or Photos file
screen displayed, select the TOOLS button,
and then press the
button. The Options menu appears.
2. Use the ▲▼ buttons to select Send, and
then press the v button. The Selection
screen appears.
3. Use the ▲▼ buttons to select a file,
and then press the v button. A check
appears to the left of the file.
4. Repeat Step 3 to select and check
additional file.
5. To remove a file from the list, move to the
file, and then press the v button again.
The check on the picture is removed.
6. When done, press the ▲▼ button to
select Send, and then press the v
button.
The Send pop-up appears listing the online sites (Picassa, Facebook, etc.) or
devices that you can send the photos to.
36
[BD-H6500-XU]AK68-02465G-02ENG-.indd 36
English
2014-05-27 오후 1:39:07
Network Services
You can enjoy various network services such as
streaming video or on-line apps by connecting
the product to your network.
1. Connect the product to a network.
(See page 13)
8. Select the Date of Birth field, and then
select numbers using the up and down
arrow buttons or pressing numbers on
your remote. Press the v button when
done.
2. Configure the network settings.
(See pages 20~23)
9. After you have finished with all the ields,
press the ▶ button, and then press the v
button. Connecting appears, and then the
account confirmation message.
Creating a Samsung Account
10. Press the v button. The Set Profile
Picture screen appears.
Create a Samsung account so you can take
advantage of all Samsung has to offer on
line. Set up accounts for each household
member so each member can access their
own accounts on Facebook, Twitter, etc. You
also need a Samsung account if you want to
download for-pay apps and rent Films.
1. On the Home screen, press the
The Log In screen appears.
button.
2. Select Create Account on the bottom
right, and then press the v button.
The Samsung account terms & conditions,
privacy policy screen appears.
||NOTE |
\\ Samsung sends a confirming e-mail to the address
you entered. You must open the e-mail and respond
as requested to finalize your account.
11. Select a picture to identify your account,
and then press the v button. The
Account Created screen appears.
12. Press the v button. The Home screen
appears.
Before Using Apps
3. Press the v button to agree, press the
▶ button, and then press the v button.
The Create a Account screen appears.
If you haven’t set up Smart Hub, when you use
Apps for the first time, the product will ask you
to perform the Smart Hub set up procedure.
4. Select the ID field, and then press the v
button. The keyboard pop-up appears.
1. On the Home screen, select either APPS,
and then press the v button. If you have
selected APPS, go to Step 4.
5. Enter your e-mail address using the
keyboard. Use the arrow buttons to move
from character to character.
Press v to select a character. Select
the Caps button on the left to enter
capitals. Select the 123#& button to select
additional symbols.
06 Network Services
To use network services, you must first:
7. Enter a password, your first name, and
last name in the same fashion.
2. If you selected APPS, the Smart Hub popup appears asking if you want to set up
Smart Hub. Select Yes, and then press the
v button. The Welcome screen appears.
6. When finished, select the Done button
on the keyboard, and then press the v
button. The Create screen reappears.
37
[BD-H6500-XU]AK68-02465G-02ENG-.indd 37
English
2014-05-27 오후 1:39:07
Network Services
3. Select Start, and then press the v
button. The Terms and Policy screen
appears.
4. On the Additional Services, Terms and
Conditions and Choices screen, you must
review and agree to both the Smart Hub
Terms and Conditions and the Privacy
Policy to use Smart Hub.
5. Scroll down, and then click the View
details buttons to review the full
documents.
||NOTE |
\\ You do not need to consent to the Supplemental
Privacy Notice, but one or more Smart TV features or
functionalities may not be available if you do not.
6. Select I agree to all, and then press the
v button. The Setup Complete screen
appears. Press the v button.
Using Films and TV Shows
If you haven’t set up Smart Hub, when you
use Films and TV Shows for the first time, the
product will ask you to perform the Smart Hub
set up procedure.
You can stream Films and TV Shows and view
them on your TV.
2-1. Alternately, select Films or TV Shows and
then press the v button.
On the page that appears, use the
▲▼◀▶ buttons to select a show or
movie, and then press the v button.
On the Films or TV Shows screen, you can
also select What’s New or Genres to see
more available shows or Films. On the
Genres screen, use the ▲▼◀▶ buttons
to select a desired Genres, and then press
the v button.
To make a selection on a page displaying
Films and TV Shows, use the ▲▼◀▶
buttons to make a selection, and then
press the v button.
3. To watch a selection, select listed apps,
and then press the v button.
||NOTE |
\\ The listed apps appears if you have not installed any
of the movie apps you could use to watch the movie
or TV show you selected. If none of these apps are
installed on your Blu-ray player, select one of the
apps, and then press the v button. You will be
asked if you want to install the app. Select Install,
press the v button, and then follow the directions
that appear on the screen to install the app.
4. Follow the directions on the screen to start
the movie.
||NOTE |
\\ Contents items and the corresponding bottom menu
in Films and TV Shows differ between countries.
FILMS AND TV SHOWS
Recommended
\\ When you activate Films and TV Shows for the first
time, the listed apps may not be displayed.
The listed apps is displayed after you download a
video contents App for use.
If the listed apps button is not displayed, you cannot
watch contents.
Favourites
Featured
Films
TV Shows
Trailers
Trending
1. On the Home screen, select FILMS AND TV
SHOWS, and then press the v button.
\\ Favourites will not appear unless you have tagged
one or more films or TV shows as a favourite. To tag
a movie or show as a favourite, select the show. The
Detail screen appears. Select the heart symbol, and
then press the v button.
2. Select one of the Recommended Films,
and then press the v button. The page
for that movie appears. Use the ▼ button
to go to the bottom of the screen.
38
[BD-H6500-XU]AK68-02465G-02ENG-.indd 38
English
2014-05-27 오후 1:39:08
You can download applications from the
Internet, and access various application
and view them on your TV. To access some
applications, you need to have a Samsung
account.
The Apps Screen at a Glance
1
2
APPS
Recommended
1
2
3
4
5
2
3
4
5
My Apps (1 / 1)
WebBrowser
06 Network Services
The first time you open the Apps screen, the
Blu-ray player automatically downloads a
group of free apps. Once these apps have
been downloaded, they appear on the Apps
screen.
To see additional apps, select Most Popular,
What's new, or Categories on the bottom of
the screen, and then press the v button.
Most Popular displays the most popular apps,
What's new the newest. Categories displays a
series of icons representing categories such as
Videos, Games, and Sports. Select a category
icon, and then press the v button. The Bluray player displays the apps in that category.
Using Apps
Downloading an App
6
7
8
9
10
1. Select Most Popular, What's New, or
Categories, and then press the v button.
Most Popular
What's new
2. If you selected Categories, select a
category icon, and then press the v
button. Otherwise, go to Step 3.
Categories
3
1
Recommended : Displays recommended
contents managed by Samsung. You cannot
delete Recommended Apps.
2
My Apps : Displays your personal gallery of
applications modifiable on the My Apps screen.
3
Most Popular, What’s new and Categories :
Select to view and download additional apps.
||NOTE |
\\ On the Most Popular, What's new, and Categories
screens, a green arrow is displayed on apps you have
already downloaded.
3. Select an app you want to download,
and then press the v button. The Detail
Information screen for the apps appears.
4. Select the Download button on the
screen, and then press the v button.
Download changes to Cancel and the app
begins to download.
5. If you want to cancel the download, select
Cancel, and then press the v button.
6. When the download is complete,
Cancel changes to Play. Select Play, and
then press the v button to start the
application. Alternately, press the RETURN
button until the Apps screen reappears.
The app you downloaded will be displayed
on the Apps screen under My Apps.
||NOTE |
\\ If the App cannot be downloaded due to insufficient
remaining internal memory, connect a USB storage
device and try again.
39
[BD-H6500-XU]AK68-02465G-02ENG-.indd 39
English
2014-05-27 오후 1:39:09
Network Services
Starting an Application
View Detail
1. Select APPS on the Home screen, and
then press the v button.
1. On the My Apps screen, select the app
you want to see detailed information
for, and then press the v button for 3
seconds. The Option menu appears.
2. On the APPS screen, use the ▲▼◀▶
buttons to select an app, and then press
the v button. The app starts.
The Option Menu
2. Select View Detail, and then press the v
button.
Update Apps
Move
1. On the My Apps screen, select the app
you want to move and then press the v
button for 3 seconds. The Option menu
appears.
2. Select Move, and then press the v
button.
3. Use the ▲▼◀▶ buttons to move the app.
4. When the app is where you want it, press
the v or EXIT button.
Delete
1. On the My Apps screen, select any app,
and then press the v button for 3
seconds. The Option menu appears.
2. Select Update Apps, and then press the
v button.
3. The Update Apps screens lists all the apps
that have updates available. Select each
app you want to update, and then press
the v button. You can also choose Select
All to update all the apps listed.
4. Select Update, and then press the v
button.
1. On the My Apps screen, select the app
you want to delete and then press the v
button for 3 seconds. The Option menu
appears.
2. Select Delete, and then press the v
button.
3. Use the ◀▶ buttons to select OK, and
then press the v button.
Delete Multiple
1. On the My Apps screen, select an app you
want to delete and then press the v
button for 3 seconds. The Options menu
appears.
2. Select Delete Multiple, and then press the
v button.
3. Use the ▲▼◀▶ buttons to select apps
you want to delete, and then press the
v button.
4. Use the ▼ buttons to select Delete, and
then press the v button.
40
[BD-H6500-XU]AK68-02465G-02ENG-.indd 40
English
2014-05-27 오후 1:39:09
Screen mirroring
Using the Web Browser
1. In the Home screen, select Screen
mirroring, and then press the v button.
2. Launch AllShare Cast or Screen mirroring
on your device.
3. On your device, find the name of the
product in the list of available devices and
then select it.
4. The TV displays a connecting message (for
example, Connecting to Android_92gb...)
and then displays the connected message.
5. In a few moments, the screen of your
device appears on the TV screen.
6. To stop Screen Mirroring, press the EXIT or
RETURN button on the remote control, or
exit the Screen Mirroring function on your
smart phone.
||NOTE |
\\ You can connect to a device that supports AllShare
Cast. Note that all devices that have AllShare Cast
may not be fully supported, depending on the
manufacturer. For further information on mobile
connection support, refer to the manufacturer’s web
site.
You can access the Internet using the Web
Browser application.
Select WebBrowser on the Home screen, and
then press the v button.
||NOTE |
\\ When you run the Web Browser with the product
connected by HDMI to a BD Wise compatible TV
- and BD Wise is on - the browser is maximized to
fill the screen and the TV's resolution is set to the
optimal resolution automatically.
06 Network Services
The Screen mirroring function lets you view the
screen of your smart phone or android tablet
on the TV you have connected to the product.
\\ The Web Browser is not compatible with Java
applications.
\\ If you attempt to download a file, and the file
cannot be saved, an error message will appear.
\\ E-commerce (purchasing products online) is not
supported.
\\ ActiveX is not supported.
\\ Access may be blocked to some websites or to web
browsers operated by certain businesses.
\\ When you are using the Screen Mirroring function,
video stuttering or audio dropouts may occur,
depending on your environment.
\\ Bluetooth transmissions can interfere with the
Screen Mirroring signal. Before using the Screen
Mirroring function, we strongly recommend that you
turn off the Bluetooth function on your smart phone
or smart device (tablet, etc.).
41
[BD-H6500-XU]AK68-02465G-02ENG-.indd 41
English
2014-05-27 오후 1:39:09
Network Services
Link Browsing and Pointer Browsing
The Web Browser provides two types of
browsing, Pointer Browsing and Link Browsing.
When you launch the browser for the first
time, Pointer Browsing is active. If you are
using a mouse to navigate in the Web Browser,
we recommend leaving Pointer Browsing
active. If you are using your remote to navigate
in the Web Browser, we recommend that you
replace Pointer Browsing with Link Browsing.
Link Browsing moves a highlight from one link
to the next in the Web Browser and is much
faster than Pointer Browsing if you are using
your remote.
To activate Link Browsing, follow these steps:
•
•
•
1
1. Use the ▲▼◀▶ buttons on your remote
to move the pointer to the Link Browser
icon on the top right of the screen. The
Link Browser icon is the third icon from
the right.
The pointer will be in the correct position
if the icon turns blue and the words “Link
Browsing” appear on the screen.
2. Press the v button. Link Browsing is
activated and will remain active whenever
you bring up the Web Browser.
The Control Panel at a Glance
The Control Panel, which runs across the top
of the screen, has a series of icons which start
a number of useful functions. The icons are
described below, starting with the icon on the
far left of the screen.
http://www.samsung.com
http://www.samsung.com
100%
New Tab
: Moves to the previous page.
: Moves to the next web page.
: Displays the Bookmarks and History
screen. You can bookmark the current page,
select an existing bookmark, and edit and
delete bookmarks. You can also view your
browsing history and select a page to revisit.
• : Moves to the Home screen of the Web
Browser.
: Lets you enter a
•
page address manually using the keyboard
pop-up.
• : Reloads the current page so that it is
refreshed on the screen.
• : Adds the current page to your
bookmarks.
: Lets you search for
•
information by entering words or characters
using the keyboard pop-up. See "Using the
Keyboard Pop-up" on pages 42~43.
: Lets you enlarge or shrink the
•
screen by various percentages.
• / : Lets you switch between Pointer
Browsing and Link Browsing.
• : Lets you configure the Browser’s
settings. See "Using the Settings Menu" on
pages 43~44.
• : Closes the Web Browser.
: Opens a new web
• http://www.samsung.com
browser tab.
Using the Keyboard Pop-up
When you click the
, the
or access a data or text entry field,
and then press the v button, the keyboard
pop-up appears.
To use the keyboard pop-up with your remote,
follow these steps:
http://www.samsung.com
New Tab
http://www.samsung.com
http://www.samsung.com
100%
100%
New Tab
As you enter characters, recommended text will be shown.
Caps 1234567890
[BD-H6500-XU]AK68-02465G-02ENG-.indd 42

qw e r t y u i o p ^ *
123#&
a
z x c v b nm , . ? - $Cancel
s
d
f
g
h
j
k
l
ENG www..com /
42
:Clear
~ @
!
Done
+_%
English
2014-05-27 오후 1:39:13
1. Use the ▲▼◀▶ buttons on your remote
to move the highlight to a letter or
number of your choice.
3. To access capital letters, move the
highlight to the Caps key on the top left,
and then press the v button. Press
the v button again with the Caps key
highlighted to access small letters again.
4. To access symbols and additional
punctuation marks, highlight the 123#&
button on the left, and then press the v
button.
5. To delete a character you entered, move
the highlight to the : button, and then
press the v button.
6. To delete all the characters you entered,
move the highlight to the Clear button,
and then press the v button.
7. When finished entering, move the
highlight to the Done button, and then
press the v button.
||NOTE |
\\ If you have a wireless keyboard connected to your
product, you can use the wireless keyboard to enter
letters, numbers, symbols, and punctuation. Note
that the wireless keyboard will work only when the
keyboard popup appears and can only be used to
enter letters, numbers, symbols, and punctuation.
Reset
recommended
text data
Predict Next
Letter
The keyboard predicts the next
letter as you enter letters. The
predictions appear in a ring around
the letter you have just entered.
You can select a predicted letter
or move to another letter. You can
turn this function On or Off.
Accented
character
preview
Select this if you want to type
letters with accent marks.
Using the Setting Menu
The Setting menu contains functions that
control how the Browser operates and Browser
security functions. To open the Setting menu,
icon in the Control Panel, and
highlight the
then press the v button. To select an option
in the setting menu, highlight the option, and
then press the v button.
http://www.samsung.com
http://www.samsung.com
100%
New Tab
Enable Grabbing
Approved Sites
Private Browsing On
Set Search Engine
Web Browser Setting
Options on the Keyboard Pop-Up
Help
To access the keyboard pop-up options,
highlight the
button on the bottom left of
the keyboard, and then press the v button.
Language
Select the language for the
keyboard.
You can select English, French,
Russian, etc.
Recommended
Text
The keyboard suggests
recommended words as you enter
text. You can turn this function On
or Off.
43
[BD-H6500-XU]AK68-02465G-02ENG-.indd 43
06 Network Services
2. Press the v button to enter the letter or
number into the entry field.
Reset erases the Samsung
Keyboard's memory. Select Reset to
erase everything that the Samsung
Keyboard has learned about your
writing style, including any new
words you have used.
Close
Enable/Disable
Grabbing
Turns the Grabber function on and
off. When the Grabber function is
on, you can move a web page up
and down without dragging the
scroll bar.
The Grabber function is only
available in Pointer Browsing.
English
2014-05-27 오후 1:39:14
Network Services
Approved Sites
Lets you restrict your children’s
access to inappropriate web pages
by allowing access only to the web
sites you have registered.
Every time you access this function,
the PIN screen appears. The first
time you access this function, enter
the default PIN, 0000 using the
number buttons on your remote.
You can change the PIN using the
Reset password for the Approved
Sites function. See below.
Approved Sites Feature : Turns the
Approved Sites function on or off.
Reset password for Approved
Sites : Change the Approved Sites
password.
Add current site : Lets you add the
currently displayed web site to the
Approved Sites list.
Manage Approved Sites : Lets you
key in URLs to add to the Approved
Sites List and delete sites from the
Approved Sites list.
If you turn this function on and
have not added any sites to the
Approved Sites list, you will not be
able to access any Internet sites.
Enable or disable the Privacy mode.
When the Privacy mode is enabled,
the browser does not retain the
URLs of sites you visit. If you want
Private Browsing to enable Privacy mode, select OK.
On/Off
If the Privacy mode is running, the
“Stop” icon appears in front of the
URL at the top of the screen. To
disable Privacy mode, select it again
when Privacy mode is enabled.
Set Search
Engine
You can set the desired Search
Engine.
44
[BD-H6500-XU]AK68-02465G-02ENG-.indd 44
Set as homepage : You can set the
Browser's home page.
Pop-up Block : Turns the Popup
Block on and off.
Page Block : You can determine
whether to block advertisements
and select the URLs for which
advertisements are blocked.
General : You can delete personal
information such as website history
and browsing data (cookies, etc.),
and reset all web browser settings
to their factory defaults. You can
also set the Security Mode.
Web Browser
Setting
Help
||NOTE |
\\ Set the Security Mode to On
to avoid accessing malicious/
phishing sites and prevent
malicious code from running.
Encoding : You can set the
Encoding setting for web pages to
Automatic or select the encoding
format manually from a list.
Pointer : You can set the speed of
the cursor when the cursor is set to
Pointer and turn Smart Cursor On
and Off.
Browser Information : Displays
the version number and copyright
information for the Web Browser.
Provides basic information about
the operation of the Web Browser.
||NOTE |
\\ Depending on the web site, some of the Web
Browser Setting functions may not be activated.
Functions that are not activated are greyed out and
cannot be used.
English
2014-05-27 오후 1:39:14
Linking Your Internet Service
Accounts to the Product
06 Network Services
The Link Service Accounts function lets you link
your product to your accounts with Internet
services such as Pandora so that the product
can log you in to the service automatically
when you start the app for that service.
Register your account by going to HOME 
Sign In  Create with Facebook.
BD-LIVE™
Once the product is connected to your
network, you can enjoy various movierelated service contents available on BD-LIVE
compliant discs.
1. Attach a USB flash memory drive to the
USB jack on the front of the product, and
then check its remaining memory. The
memory device must have at least 1GB of
free space to accommodate the BD-LIVE
services.
2. Select Settings on the Home screen, and
then press the v button.
3. Select Network, and then press the v
button.
4. Select BD-Live Settings, and then press the
v button.
5. Select BD Data Management, and then
press the v button.
6. Select Select Device, and then press the
v button.
7. Select USB device, and then press the v
button.
8. Insert a Blu-ray Disc that supports BD-LIVE.
9. Select an item from the list of BD-LIVE
service contents provided by the disc
manufacturer.
||NOTE |
\\ The way you use BD-LIVE and the provided contents
may differ, depending on the disc manufacturer.
45
[BD-H6500-XU]AK68-02465G-02ENG-.indd 45
English
2014-05-27 오후 1:39:14
Appendix
Additional Information
Notes
3D Settings
• For some 3D discs, to stop a movie during 3D playback, press the 5 (STOP) button
once. The movie stops and the 3D mode option is de-activated.
To change a 3D option selection when you are playing a 3D movie, press the 5 (STOP)
button once. The Home Screen menu appears. Press the 5 (STOP) button again, then
select 3D Settings in the Blu-ray menu.
• Depending on the content and the position of the picture on your TV screen, you may
see vertical black bars on the left side, right side, or both sides.
TV Aspect Ratio
• Depending on the disc type, some aspect ratios may not be available.
• If you select an aspect ratio and option that is different than the aspect ratio of your TV
screen, the picture might appear to be distorted.
• If you select the 16:9 Original, your TV may display 4:3 Pillarbox (black bars on the sides
of the picture).
BD Wise (Samsung Products only)
Settings
• When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD
Wise appears in the Resolution menu.
• If the product is connected to a device that does not support BD Wise, you cannot use
the BD Wise function.
• For proper operation of BD Wise, set the BD Wise option of both the product and the TV to On.
Digital Output
• Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
• If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
• Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
• Some Blu-ray Discs do not have BONUSVIEW audio and Navigation Sound Effects.
• This Digital Output setup does not affect the HDMI audio output to your TV.
It affects the optical and HDMI audio output when your product is connected to an AV receiver.
• If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your
Digital Output selections (PCM or Bitstream).
PCM Downsampling
• Even when PCM Downsampling is set to Off, some discs will only output downsampled
audio through the optical digital output.
• HDMI
-- If your TV is not compatible with compressed multi-channel formats (Dolby Digital,
DTS), the product may output PCM 2ch downmixed audio even though you selected
Bitstream (either Reencoded or Unprocessed) in the setup menu.
-- If your TV is not compatible with PCM sampling rates over 48kHz, the product may
output 48kHz.
46
[BD-H6500-XU]AK68-02465G-02ENG-.indd 46
English
2014-05-27 오후 1:39:15
BD-LIVE Internet Connection
BD Data Management
Settings
07 Appendix
• What is a valid certificate?
When the product uses BD-LIVE to send the disc data and a request to the server to
certify the disc, the server uses the transmitted data to check if the disc is valid and
sends the certificate back to the product.
• The Internet connection may be restricted while you are using BD-LIVE contents.
• In the external memory mode, disc playback may be stopped if you disconnect the USB
device in the middle of playback.
• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are
supported.
We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or
faster read/write speed.
• The Resume Play function may not work after you format the storage device.
• The total memory available to BD Data Management may differ, depending on
conditions.
Anynet+ (HDMI-CEC)
• Depending on your TV, certain HDMI output resolutions may not work. Please refer to
the user manual of your TV.
• This function is not available if the HDMI cable does not support CEC.
• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
Selecting the Audio Language
• The ◀▶ indicator will not appear on the screen if the BONUSVIEW section does not
contain any BONUSVIEW audio settings.
• The languages available through the Audio Language function depend on the
languages that are encoded on the disc. This function or certain languages may not be
available.
• Some Blu-ray Discs may allow you to select either the PCM or Dolby Digital audio
soundtrack in English.
Media Play
Selecting the Subtitle Language
• Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle language
in the Disc Menu. Press the DISC MENU button.
• This function depends on the selection of subtitles that are encoded on the disc and
may not be available on all Blu-ray Discs/DVDs.
• Information about the main feature BONUSVIEW mode will also appear if the Blu-ray
Disc has a BONUSVIEW section.
• This function changes both the primary and secondary subtitles at the same time.
• The total number of primary and secondary subtitles, respectively, is displayed.
• If you press the SUBTITLE button on the remote control, the subtitle bar appears.
Press the RETURN button to remove the subtitle bar.
47
[BD-H6500-XU]AK68-02465G-02ENG-.indd 47
English
2014-05-27 오후 1:39:15
Appendix
Resolution according to the contents type
Contents Type
Blu-ray Disc
Setup
BD Wise
Auto
UHD Output :
Movie Frame :
Auto
Auto
UHD Output : Off
Movie Frame : Off
Movie Frame : Auto (24fps)
※ 1080p & 1080i only
1080p
1080i
720p
576p/480p
Resolution of Blu-ray Disc
1080p
2160p@24F
2160p@24F
1080p@24F
Max. Resolution of TV input
1080p@24F
Max. Resolution of TV input
1080p@24F
1080p@24F
1080p
1080i
720p
576p/480p
1080p
1080i
720p
576p/480p
Contents Type
Setup
BD Wise
Auto
E-contents/
Digital contents
DVD
576i/480i
UHD Output :
Auto
Movie Frame : DVD 24fps Conversion : Auto
Auto
UHD Output : Off
DVD 24fps Conversion : Off
Movie Frame : Off
Movie Frame : Auto (DVD 24fps Conversion : Auto )
※ 1080p & 1080i only
1080p
1080i
720p
576p/480p
2160p@24F
1080p@24F
Max. Resolution of TV input
Max. Resolution of TV input
1080p@24F
1080p@60F
1080i
720p
576p/480p
||NOTE |
\\ If the TV you connected to the product does not support Movie Frame or the resolution you selected, the
message "If no pictures are shown after selecting 'Yes', please wait for 15 seconds to return to the previous
resolution. Do you want to change the resolution? " appears. If you select Yes, the TV's screen will go blank for 15
seconds, and then the resolution will revert to the previous resolution automatically.
\\ If the screen stays blank after you have changed the resolution, remove all discs, and then press and hold the
@ button on the top of the product for more than 5 seconds. The initialization message appears on the screen,
the player turns off automatically. When you turn your product on again, all the settings will be reset. Run the
Initial Settings procedure again. Then, go to Settings > Picture > Resolution in the Menu, and select the correct
resolution for your TV.
\\ When you run the Initial Settings procedure, re-select the language and aspect ratio (screen size and format)
only. Resetting does not affect your network settings, so you should be able to skip Network Setup and Software
Update.
\\ When the factory default settings are restored, all stored user BD data is deleted.
\\ A Blu-ray Disc must have the 24 frame feature for the product to use the Movie Frame (24fps) mode.
48
[BD-H6500-XU]AK68-02465G-02ENG-.indd 48
English
2014-05-27 오후 1:39:15
Digital Output Selection
Bitstream
(Unprocessed)
PCM
Connection
HDMI
supported
AV receiver
Up to PCM
7.1ch
Up to PCM
Dolby Digital
7.1ch
Dolby Digital Up to PCM
Plus
7.1ch
Dolby
Up to PCM
Audio Stream
TrueHD
7.1ch
on Blu-ray
Up to PCM
Disc
DTS
6.1ch
PCM
Optical
HDMI
supported
AV receiver
PCM 2ch
PCM
Dolby
Digital
Dolby
PCM 2ch
Digital Plus
Dolby
PCM 2ch
TrueHD
PCM 2ch
PCM 2ch
DTS
DTSDTS-HD High
HD High
Up to PCM
PCM 2ch
Resolution
Resolution
7.1ch
Audio
Audio
DTS-HD
Up to PCM
Master Audio
7.1ch
PCM
PCM 2ch
Up to PCM
Audio Stream Dolby Digital
5.1ch
on DVD
Up to PCM
DTS
6.1ch
Definition
for Blu-ray
Disc
Any
Optical
Bitstream
(Re-encoded
DTS)
HDMI
HDMI supported
supported AV
AV receiver or
receiver or
Optical
Optical
PCM 2ch DTS re-encoded
Dolby
Digital
Dolby
Digital
Dolby
Digital
Bitstream
(Re-encoded
Dolby D)
DTS re-encoded
DTS re-encoded
DTS re-encoded
DTS
DTS re-encoded
DTS
DTS re-encoded
07 Appendix
Setup
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
Re-encoded
Dolby Digital *
DTS-HD
Re-encoded
DTS
DTS re-encoded
Master Audio
Dolby Digital *
PCM 2ch PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Dolby
Dolby
PCM 2ch
Dolby Digital
Dolby Digital
Digital
Digital
PCM 2ch
PCM 2ch
DTS
DTS
Outputs only the main
Decodes the main
feature audio stream
feature audio and
so that your AV receiver
BONUSVIEW audio
can decode the audio
stream together into
bitstream.
PCM audio and adds
You will not hear
Navigation Sound
BONUSVIEW audio or
Effects.
Navigation Sound Effects.
DTS
DTS
Decodes the main
feature audio
and BONUSVIEW
audio stream
together into PCM
audio and adds
Navigation Sound
Effects, then reencodes the PCM
audio into DTS
bitstream.
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects,
then re-encodes
the PCM audio
into Dolby Digital
bitstream or PCM.
*If the Source Stream is 2ch or mono, "Re-encoded Dolby D" Settings are not applied. Output will
be PCM 2ch.
Blu-ray Discs may include three audio streams :
-- Main Feature Audio : The audio soundtrack of the main feature.
-- BONUSVIEW audio : An additional soundtrack such as the director or actor's commentary.
-- Navigation Sound Effects : When you choose some menu navigation, Navigation Sound Effects
may sound. Navigation Sound Effects are different on each Blu-ray Disc.
49
[BD-H6500-XU]AK68-02465G-02ENG-.indd 49
English
2014-05-27 오후 1:39:15
Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM
SOLUTION
No operation can be performed with the • Check the batteries in the remote control. They may need replacing.
remote control.
• Operate the remote control at a distance of no more than 6.1m.
from the product.
• Remove the batteries and hold down one or more buttons for
several minutes to drain the microprocessor inside the remote
control to reset it. Reinstall the batteries and try to operate the
remote control again.
The disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
The disc Menu does not appear.
• Ensure that the disc has disc menus.
The prohibition message appears on the
screen.
• This message appears when an invalid button is pressed.
• The Blu-ray Disc/DVD's software doesn't support the feature (e.g., angles).
• You've requested a title or chapter number or search time that is out
of range.
Play mode differs from the Setup Menu
selection.
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot be changed.
• The Screen Ratio is fixed on your Blu-ray Disc/DVD.
• This is not a problem with the product.
No audio.
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
The screen is blank.
• If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
• Press the @ button (on top panel) for more than 5 seconds with no
disc inside. The initialization message appears on the screen, and
the player turns off automatically. When you turn your product on
again, all the settings will be reset.
• When the factory default settings are restored, all stored user BD
data will be deleted.
Forgot password.
• Press the @ button (on top panel) for more than 5 seconds with no
disc inside. The initialization message appears on the screen, and
the player turns off automatically. When you turn your product on
again, all the settings will be reset.
Don't use this unless absolutely necessary.
• When the factory default settings are restored, all stored user BD
data will be deleted.
50
[BD-H6500-XU]AK68-02465G-02ENG-.indd 50
English
2014-05-27 오후 1:39:16
PROBLEM
SOLUTION
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the
product.
• Check if your TV supports the 576p/480p, 720p, 1080i or 1080p
HDMI input resolution.
Abnormal HDMI output appears on the
screen.
• If random noise appears on the screen, it means that TV does not
support HDCP (High-bandwidth Digital Content Protection).
If you experience other problems.
• Go to the table of contents and find the section of the user manual
that contains information about the feature you are having the
problem with, and then follow the procedure again.
• If you still cannot resolve the problem, please contact your nearest
Samsung authorised service centre.
07 Appendix
The picture is noisy or distorted.
Play Multimedia on network devices
You can see folders shared on network
devices, but cannot see the files.
• Multimedia list only shows Video, Photo, and Music files. Other
types of files are not displayed.
Video plays intermittently.
• Check if the network is stable.
• Check if the network cable is properly connected and if the network
is not overloaded.
• The wireless connection between the AllShare compatible device
and the product is unstable.
Check the connection.
The Network connection between the
product and the PC is unstable.
• IP addresses within the same subnetwork should be unique.
If they are not, IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
51
[BD-H6500-XU]AK68-02465G-02ENG-.indd 51
English
2014-05-27 오후 1:39:16
Appendix
PROBLEM
SOLUTION
BD-LIVE
This product cannot connect to the BDLIVE server.
• Test whether the network connection is working using the Network
Status function. (See page 17)
• Check whether a USB memory device is connected to the product.
• The memory device must have at least 1GB of free space to
accommodate the BD-LIVE service.
You can check the available size in BD Data Management. (See page 18)
• See if the BD-LIVE Internet Connection option is set to Allow(All).
• If all above fails, contact the contents provider or update to the
product to the latest firmware.
When using the BD-LIVE service, an error • The memory device must have at least 1GB of free space to
occurs.
accommodate the BD-LIVE service.
You can check the available size in BD Data Management. (See page 18)
||NOTE |
\\ When the factory default settings are restored, all stored user BD data will be deleted.
Repairs
If you contact us to repair your product, an administration fee may be charged if either:
1. An engineer is called out to your home at your request and there is no defect in the product.
2. You bring the unit to a repair centre and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or
begin any work on your product.
We recommend you read this manually thoroughly, search for a solution on line at
www.samsung.com, or contact Samsung Customer Care before seeking to repair your product.
52
[BD-H6500-XU]AK68-02465G-02ENG-.indd 52
English
2014-05-27 오후 1:39:16
Disc and Format Compatibility
Media
VIDEO
MUSIC
PHOTO
Disc Type
Blu-ray Disc
3D Blu-ray Disc
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
07 Appendix
Disc types and contents your product can play
Details
BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have been recorded
and finalized, or a USB storage media containing DivX, MKV, MP4 contents.
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media
containing MP3 or WMA contents.
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB storage media
containing JPEG contents.
||NOTE |
\\ The product may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
\\ If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
\\ Your product will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
\\ Your product will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds 25
Mbps.
\\ Playback may not work for some types of discs, or when you use specific functions, such as angle change and
aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to this if
necessary.
\\ When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc types your product cannot play
• HD DVD
• DVD-ROM/PD/
MV, etc
• DVD-RAM
• Super Audio CD
(except CD layer)
53
[BD-H6500-XU]AK68-02465G-02ENG-.indd 53
• DVD-RW (VR mode) • 3.9 GB DVD-R for
Authoring.
• CVD/CD-ROM/CDV/
CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
English
2014-05-27 오후 1:39:16
Appendix
Region Code
Logos of Discs the product can play
Both products and discs are coded by region.
These regional codes must match for a disc to
play. If the codes do not match, the disc will
not play.
The Region Number for this product is
displayed on the rear panel of the product.
Disc Type
Blu-ray Disc
Region
Code
Area
a
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
b
Europe, Greenland, French
territories, Middle East,
Africa, Australia and New
Zealand.
C
India, China, Russia, Central
and South Asia.
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle
East, Egypt, Africa,
Greenland
3
Taiwan, Korea, the
Philippines, Indonesia, Hong
Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
5
Russia, Eastern Europe, India,
North Korea, Mongolia
6
China
DVD-VIDEO
54
[BD-H6500-XU]AK68-02465G-02ENG-.indd 54
Blu-ray Disc
3D Blu-ray Disc
BD-LIVE
DivX
PAL broadcast System in
U.K., France, Germany,
etc.
English
2014-05-27 오후 1:39:17
Supported Formats
Video File Support
Container
Video Codec
Resolution
MVC
*.avi
*.mkv
*.asf
*.wmv
*.mp4
*.mov
*.3gp
*.vro
*.mpg
*.mpeg
*.ts
*.tp
*.trp
*.mov
*.flv
*.vob
*.svi
*.m2ts
*.mts
*.divx
*.ps
*.webm
Frame rate
(fps)
24/25/30
Bit rate (Mbps) Audio Codec
60
Motion JPEG
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
SVAF
07 Appendix
File Extension
H.264 BP/MP/
HP
Divx 3.11 / 4 /
5/6
MPEG4 SP/ASP
1920x1080
Window Media
Video v9(VC1)
AVS
MPEG2
FHD: MAX 30
HD : MAX 60
30
MPEG1
Microsoft
MPEG-4 v1 , v2
, v3
H 263
Sorrenson
Window
Media Video
v7(WMV1),
v8(WMV2)
1280x720
VP6
640x480
6~30
4
VP8
1920x1080
6~30
20
WebM
AC3
LPCM
ADPCM(IMA,
MS)
AAC
HE-AAC
WMA
Dolby Digital
Plus
MPEG(MP3)
DTS
Vorbis
`` Limitations
-- Even when a file is encoded by a supported codec listed in the Video File Support table, the file
might not play if its content has a problem.
-- Normal playback is not guaranteed if the file’s container information is wrong or the file itself is
corrupted.
-- Files having a higher Bit rate/frame rate than indicated in the Video File Support table may stutter
when played back.
-- Seek (Jump) function is not available if the file’s index table is damaged.
-- When you playback a file remotely through a network connection, video playback may stutter
depending on the network speed.
-- Some USB/Digital camera devices may not be compatible with the product.
-- The AVS codec is supported only by models made for China.
-- The *.ps file extension is supported only by models made for China.
-- The DivX codec is not supported by models made for America.
-- If the original content of a file was recorded in UHD, it cannot be played.
55
[BD-H6500-XU]AK68-02465G-02ENG-.indd 55
English
2014-05-27 오후 1:39:17
Appendix
`` Video decoder
-- Supports up to H.264 Level 4.1. (Does not
support FMO/ASO/RS)
-- Does not support VC1/AP/L4.
-- CODECs except for WMVv7, v8, MSMPEG4
v3, MVC, VP6
1)Below 1280 x 720 : 60 frames max.
2)Above 1280 x 720 : 30 frames max.
-- Does not support GMC 2 or higher.
-- Supports SVAF Top/Bottom, Side by Side ,
Left/Right view sequence type(2 ES)
-- Supports BD MVC Spec.
Internal
`` Audio decoder
-- Supports WMA 10 PRO (Up to 5.1).
-- Does not support WMA lossless audio.
-- Also supports the M2 profile.
-- The RealAudio 10 lossless format is not
supported by models made for China and
Hong Kong.
-- Does not support QCELP/AMR NB/WB.
-- Supports vorbis (Up to 2ch).
-- Supports DD+ (Up to 5.1ch)
-- The DTS LBR codec is supported only for
MKV / MP4 / TS containers.
ĞĞ
Xsub
AVI
SubStation Alpha
MKV
Advanced
SubStation Alpha
MKV
SubRip
MKV
VobSub
MKV
MPEG-4 Timed text
MP4
TTML in smooth
streaming
MP4
SMPTE-TT TEXT
MP4
SMPTE-TT PNG
MP4
Music File Support
File
Extension
Type
Codec
Support Range
*.mp3
MPEG
MPEG1
Audio
Layer 3
-
*.m4a
*.mpa
*.aac
MPEG4
AAC
-
*.flac
FLAC
FLAC
Supports up to two
channels.
*.ogg
OGG
Vorbis
Supports up to two
channels.
*.wma
WMA
For WMA. Supports
up to 10 Pro 5.1
channels.
WMA
WMA lossless audio
is not supported.
*.wav
wav
Supported DivX subtitle file formats
*.ttxt, *.smi, *.srt, *.sub, *.txt
||NOTE |
\\ Some DivX, MKV and MP4 format discs may not play,
depending on their video resolution and frame rate.
File
Extension
Name
Supported Subtitle File Formats
External
Name
File
Extension
MPEG-4 Timed text
.ttxt
SAMI
.smi
SubRip
.srt
SubViewer
.sub
Micro DVD
.sub or.txt
SubStation Alpha
.ssa
Advanced
SubStation Alpha
.ass
Powerdivx
.psb
SMPTE-TT Text
.xml
*.mid
*.midi
56
[BD-H6500-XU]AK68-02465G-02ENG-.indd 56
midi
wav
-
midi
Type 0, type 1
and Seek is not
supported.
Only available with
USB.
English
2014-05-27 오후 1:39:17
Type
Codec
Support Range
*.ape
ape
ape
NVT and X13 is not
supported.
*.aif
*.aiff
AIFF
AIFF
-
*.m4a
ALAC
ALAC
-
Picture File Support
File Extension
Type
Resolution
*.jpg
*.jpeg
JPEG
15360x8640
*.png
PNG
4096x4096
*.bmp
BMP
4096x4096
*.mpo
MPO
15360x8640
AVCHD (Advanced Video Codec High
Definition)
Notes on the USB connection
• Your player supports USB storage media,
MP3 players, digital cameras, and USB card
readers.
• Some USB/digital camera devices may not be
compatible with the player.
• Your player supports the FAT16, FAT32, and
NTFS files systems.
• Connect USB devices directly to the player's
USB port. Connecting through a USB cable
may cause compatibility problems.
• Inserting more than one memory device into
a multi-card reader may cause the reader to
operate improperly.
• The player does not support the PTP (Peer to
Peer) protocol.
• Do not disconnect a USB device while it is
transferring or recording data.
• The bigger the image resolution, the longer
the image takes to display.
• This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded
from commercial sites.
• Your player only supports video that is under
30fps (frame rate).
57
[BD-H6500-XU]AK68-02465G-02ENG-.indd 57
• Your player only supports USB Mass Storage
Class (MSC) devices such as thumb drives
and USB HDD. (HUB is not supported.)
• Certain USB HDD Devices, multi-card readers
and thumb drives may not be compatible
with this player.
• If some USB devices require excessive power,
they may be limited by the circuit safety
device.
• If playback from a USB HDD is unstable,
provide additional power by plugging the
HDD into a wall socket.
If the problem continues, contact the USB
HDD manufacturer.
• SAMSUNG is not responsible for any data
file damage or data loss.
• Your player does not support NTFS
compressed, sparse, or encrypted files.
-- You can repair or format a USB device on
your Desktop PC. (MS-Windows OS only)
07 Appendix
File
Extension
• This player can play back AVCHD format
discs. These discs are normally recorded and
used in camcorders.
• The AVCHD format is a high definition digital
video camera format.
• The MPEG-4 AVC/H.264 format compresses
images with greater efficiency than the
conventional image compressing format.
• Some AVCHD discs use the "x.v.Color"
format. This player can play back AVCHD
discs that use "x.v.Color" format.
• "x.v.Color" is a trademark of Sony
Corporation.
• "AVCHD" and the AVCHD logo are
trademarks of Matsushita Electronic
Industrial Co., Ltd. and Sony Corporation.
||NOTE |
\\ Some AVCHD format discs may not play, depending
on the recording conditions.
AVCHD format discs need to be finalized.
\\ "x.v.Color" offers a wider colour range than normal
DVD camcorder discs.
English
2014-05-27 오후 1:39:17
Appendix
Compliance and Compatibility Notice
NOT ALL discs are compatible
• Subject to the restrictions described below and those noted throughout this Manual, including
the Disc Type and Characteristics section of this user manual, disc types that can be played
are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA); BD-RE/-R, DVDRW/-R; and CD-RW/-R.
• Discs other than the above cannot and/or are not intended to be played by this player. And
some of the above discs may not play due to one or more reasons provided below.
• Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not
respond to all operating commands or operate all features of every disc. These and other
disc compatibility and player operation issues with new and existing format discs are possible
because:
-- Blu-ray is a new and evolving format and this player may not operate all features of Blu-ray
Discs because some features may be optional, additional features may have been added to
the Blu-ray Disc format after the production of this player, and certain available features may
be subject to delayed availability;
-- not all new and existing disc format versions are supported by this player;
-- new and existing disc formats may be revised, changed, updated, improved and/or
supplemented;
-- some discs are produced in a manner that allows specific or limited operation and feature
during playback;
-- some features may be optional, additional features may have been added after the production
of this player or certain available features may be subject to delayed availability;
-- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and
CD-RW/-R logos may still be non-standardized discs;
-- some discs may not be played depending on their physical state or recording conditions;
-- problems and errors can occur during the creation of Blu-ray Disc, DVD software and/or the
manufacture of discs;
-- this player operates differently than a standard DVD player or other AV equipment; and/or
-- for reasons noted throughout this user manual and for other reason(s) discovered and posted
by SAMSUNG customer care centre.
• If you encounter disc compatibility or player operation problems, please contact SAMSUNG
customer care centre.
You may also contact SAMSUNG customer care centre for possible updates on this player.
• For additional information on playback restrictions and disc compatibility, refer to the
Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before Playing
sections of this user manual.
• For product progressive scan output : CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO
THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTRE.
58
[BD-H6500-XU]AK68-02465G-02ENG-.indd 58
English
2014-05-27 오후 1:39:17
Copy Protection
07 Appendix
• Because AACS (Advanced Access Content System) is approved as content protection system for
Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain
restrictions are imposed on playback, analogue signal output, etc., of AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your time
of purchase as those restrictions may be adopted and/or changed by AACS after the production
of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as content
protection system for Blu-ray Disc format, which imposes certain restrictions including playback
restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information
on AACS, BD-ROM Mark, BD+, or this product, please contact SAMSUNG customer care centre.
• Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should only
connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted
picture from copy-protected Blu-ray Disc/DVDs.
• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorised recording,
use, display, distribution, or revision of television programs, videotapes, Blu-ray Discs, DVDs,
and other materials may subject you to civil and/or criminal liability.
• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorised copies of
some commercially-produced film and videos and their soundtracks. When a prohibited use of
an unauthorised copy is detected, a message will be displayed and playback or copying will be
interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer
Information Centre at http://www.cinavia.com. To request additional information about Cinavia
by mail, send a postcard with your mailing address to: Cinavia Consumer Information Centre, P.O.
Box 86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology under licence from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending
as well as copyright and trade secret protection for certain aspects of such technology. Cinavia
is a trademark of Verance Corporation. Copyright 2004-2014 Verance Corporation. All rights
reserved by Verance. Reverse engineering or disassembly is prohibited.
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are protected
by copyright, patent, trademark and/or other intellectual property laws. Such content and
services are provided solely for your personal noncommercial use. You may not use any content
or services in a manner that has not been authorised by the content owner or service provider.
Without limiting the foregoing, unless expressly authorised by the applicable content owner or
service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create
derivative works, exploit, or distribute in any manner or medium any content or services displayed
through this device.
59
[BD-H6500-XU]AK68-02465G-02ENG-.indd 59
English
2014-05-27 오후 1:39:17
Appendix
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT WARRANT
CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY PURPOSE.
SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SAMSUNG
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS
OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND UNDER NO
CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN
CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF ANY
CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no
representation or warranty that any content or service will remain available for any period of time.
Content and services are transmitted by third parties by means of networks and transmission
facilities over which Samsung has no control. Without limiting the generality of this disclaimer,
Samsung expressly disclaims any responsibility or liability for any interruption or suspension of any
content or service made available through this device.
Samsung is neither responsible nor liable for customer service related to the content and services.
Any question or request for service relating to the content or services should be made directly to
the respective content and service providers.
Licences
• Manufactured under licence from Dolby Laboratories. Dolby and the double-D
symbol are registered trademarks of Dolby Laboratories.
• For DTS patents, see http://patents.dts.com. Manufactured under licence
from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS-HD Master Audio is a trademark of DTS, Inc. ©
DTS, Inc. All Rights Reserved.
• DivX
-- ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that has
passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information
and software tools to convert your files into DivX videos.
-- ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to
play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate
the DivX VOD section in your device setup menu. Go to vod.divx.com for more information
on how to complete your registration.
-- DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under Licence.
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274.
60
[BD-H6500-XU]AK68-02465G-02ENG-.indd 60
English
2014-05-27 오후 1:39:17
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
07 Appendix
• Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names
may be trademarks of their respective owners.
• Open Source Licence Notice
-- In the case of using open source software, Open Source Licences are available on the product
menu.
• Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
Recommendation - EU Only
• Hereby, Samsung Electronics, declares that this equipment is in
compliance with the essential requirements and other relevant provisions
of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://
www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries. This equipment may only be used indoors.
61
[BD-H6500-XU]AK68-02465G-02ENG-.indd 61
English
2014-05-27 오후 1:39:18
Appendix
Specifications
General
USB
HDMI
Audio Output
Network
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
Type A
DC output
Video
Audio
Digital Audio Output
Ethernet
Wireless LAN
Security
WPS(PBC)
1.2 Kg
360 (W) X 196 (D) X 40 (H) mm
+5°C to +35°C
10 % to 75 %
USB 2.0
5V 500mA Max.
2D : 2160p, 1080p, 1080i, 720p, 576p/480p
3D : 1080p, 720p
PCM, Bitstream
Optical
100BASE - TX Terminal
Built-in
WEP (OPEN/SHARED)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
Supported
• Network speeds equal to or below 10Mbps are not supported.
• Design and specifications are subject to change without prior notice.
• For the power supply and power consumption, refer to the label attached to the product.
• Weight and dimensions are approximate.
62
[BD-H6500-XU]AK68-02465G-02ENG-.indd 62
English
2014-05-27 오후 1:39:18
UNITED KINGDOM
This Samsung product is warranted for the
period of twelve (12) months from the original
date of purchase, against defective materials
and workmanship. In the event that warranty
service is required, you should return the product
to the retailer from whom it was purchased.
However, Samsung Authorised Dealers and
Authorised Service Centres in other EC Countries
will comply with the warranty on the terms
issued to purchasers in the country concerned.
In case of difficulty, details of our Authorised
Service Centres are available from:
Samsung Electronics U.K. Ltd. Customer Care
Centre PO Box 479 GATESHEAD NE9 9BJ
United Kingdom
United Kingdom
Tel : 0330 SAMSUNG (7267864)
Fax: 03307260001
www.samsung.com
Eire
Tel : 0818 717100
Fax: +44 117 915 6736
www.samsung.com
@ WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty
service is required, the warranty card is fully
and properly completed and is presented
with the original invoice or sales slip or
confirmation, and the serial number on the
product has not been defaced.
2. Samsung’s obligations are limited to the
repair or, at its discretion, replacement of the
product or the defective part.
3. Warranty repairs must be carried out by
Authorised Samsung Dealers or Authorised
Service Centres.
No re-imbursement will be made for repairs
carried out by non Samsung Dealers and, any
such repair work and damage to the
products caused by such repair work will not
be covered by this warranty.
[BD-H6500-XU]AK68-02465G-02ENG-.indd 63
EIRE
4. This product is not considered to be defective
in materials nor workmanship by reason that
it requires adaptation in order to conform to
national or local technical or safety standards
in force in any Country other than the one
for which the product was originally
designed and manufactured. This warranty
will not cover, and no re-imbursement will be
made for such adaptation nor any damage
which may result.
5. This warranty covers none of the following:
a) Periodic check ups, maintenance and
repair or replacement of parts due to
normal wear and tear.
b) C
ost relating to transport, removal or
installation of the product.
c) Misuse, including the faiure to use this
product for its normal purposes or
incorrect installation.
d) Damage caused by Lightning, Water, Fire,
Acts of God, War, Public Disturbances,
incorrect mains voltage, improper
ventilation or any other cause beyond the
control of Samsung.
6. This warranty is valid for any person who
legally acquired possession of the product
during the
warranty period.
7.The consumers statutory rights in any
applicable national legislation whether
against the retailer arising from the purchase
contract or otherwise are not affected by this
warranty. Unless there is national legislation
to the contrary, the rights under this
warranty are the consumers sole rights and
Samsung, its subsidiaries and distributors
shall not be liable for indirect or
consequential loss or any damage to records,
compact discs, videos or audio taper or any
other related equipment or material.
SAMSUNG ELECTRONICS (U.K.) LTD.
2014-05-27 오후 1:39:18
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.
Area
Contact Centre 
AUSTRIA
0800 - SAMSUNG (0800 - 7267864)
BELGIUM
02-201-24-18
BOSNIA
BULGARIA
CROATIA
CZECH
DENMARK
FINLAND
FRANCE
051 331 999
07001 33 11 , sharing cost
062 726 786
800 - SAMSUNG (800-726786)
70 70 19 70
030-6227 515
01 48 63 00 00
0180 6 SAMSUNG bzw.
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz,
aus dem Mobilfunk max. 0,60 €/Anruf)
8009 4000 only from landline, toll
free
80111-SAMSUNG (80111 726
7864) only from land line
(+30) 210 6897691 from mobile
and land line
0680SAMSUNG (0680-726-786)
0680PREMIUM (0680-773-648)
800-SAMSUNG (800.7267864)
261 03 710
020 405 888
GERMANY
CYPRUS
GREECE
HUNGARY
ITALIA
LUXEMBURG
MONTENEGRO
Web Site
www.samsung.com/at/support
www.samsung.com/be/
support (Dutch)
www.samsung.com/be_fr/
support (French)
www.samsung.com/support
www.samsung.com/bg/support
www.samsung.com/hr/support
www.samsung.com/cz/support
www.samsung.com/dk/support
www.samsung.com/fi/support
www.samsung.com/fr/support
www.samsung.com/de/
support
www.samsung.com/gr/
support
http://www.samsung.com/
hu/support
www.samsung.com/it/support
www.samsung.com/support
www.samsung.com/support
Area
SLOVENIA
NETHERLANDS
NORWAY
POLAND
PORTUGAL
ROMANIA
SERBIA
SLOVAKIA
SPAIN
SWEDEN
SWITZERLAND
U.K
EIRE
LITHUANIA
LATVIA
ESTONIA
Contact Centre 
080 697 267
090 726 786
0900-SAMSUNG (0900-7267864)
(€ 0,10/Min)
815 56480
0 801-172-678* lub +48 22 60793-33 **
*(całkowity koszt połączenia jak za 1
impuls według taryfy operatora)
** (koszt połączenia według taryfy
operatora)
808 20 7267
08008 SAMSUNG (08008 726 7864)
TOLL FREE No.
011 321 6899
0800 - SAMSUNG(0800-726 786)
0034902172678
0771 726 7864 (SAMSUNG)
Web Site
www.samsung.com/si/
support
www.samsung.com/nl/
support
www.samsung.com/no/support
www.samsung.com/pl/
support
www.samsung.com/pt/support
www.samsung.com/ro/support
www.samsung.com/rs/support
www.samsung.com/sk/support
www.samsung.com/es/support
www.samsung.com/se/support
www.samsung.com/ch/
support (German)
0848 726 78 64 (0848-SAMSUNG)
www.samsung.com/ch_fr/
support (French)
www.samsung.com/uk/support
0330 SAMSUNG (7267864)
0818 717100
www.samsung.com/ie/support
8-800-77777
www.samsung.com/lt/support
8000-7267
www.samsung.com/lv/support
800-7267
www.samsung.com/ee/support
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed
of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb
indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
AK68-02465G-02
AK68-02465G-02
AK68-02465G
[BD-H6500-XU]AK68-02465G-02ENG-.indd 64
2014-05-27 오후 1:39:19
Download PDF

advertising