Samsung | DVD-E232A | Samsung DVD-E232A Benutzerhandbuch

Precautions
Precautions
CAUTION : USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
1. Setting up
Ensure that the mains supply in your house complies with that indicated on the identification sticker
located at the back of your play. Install your player horizontally, on a suitable base (furniture),
with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not
covered. Do not stack other, or heavy devices on top of the player. Do not place the player on
amplifiers or other equipment which may become hot. Before moving the player ensure the disc
tray is empty. This player is designed for continuous use.
Switching off the DVD player to the stand-by mode does not disconnect the electricity supply in
order to separate the player completely from the mains, it has to be disconnected by unplugging the
main plug, especially when left unused for a long period of time.
1
2. For your safety
Never open the player or any of its components. It can be dangerous for you or certain fragile
components. You could receive an electric shock or touch the laser beam. Do not place your eyes
close to the opening of the disc tray or any other opening to look inside the player.
3. Caution
Protect the player from moisture (dripping or splashing and objects filled with liquids), and excess
heat (e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...).
Disconnect the power cable from the mains electricity supply if the player malfunctions.
Your player is not intended for industrial use but for domestic purposes only. Use of this product is
for personal use only. If your player or disc has been stored in a cold atmosphere for example
during transportation in the winter, wait for approximately 2 hours until they have reached room
temperature, before use.
2
3
4
5
4. Disc
Be careful handle your discs with care. Hold a disc with finger on the border or hole. Always place
disc with the label facing upward (in case of a single side disc). Always use a soft cloth to clean
disc if necessary, wipe from the centre to the border. Always put disc back into their cases after
playing and store in vertical position. Always place the disc properly into the tray using the proper
guide area. Never use record cleaning sprays, benzine, static electricity liquids or any other solvent,
if the disc surface is dirty. Wipe gently with a soft damp (water only) cloth, never wipe the disc in a
circular motion, since circular scratches are likely to occur and could cause noise during playback.
5. Environmental info
Batteries: The battery used in this product contains chemicals that are harmful to the environment.
Do not dispose of batteries in the general domestic waste. It is recommended that the replacement of
the battery should be done by a technician.
Disposal of old equipment and packaging: Old equipment and packaging should not be disposed of as
domestic waste, but in accordance with the appliable regulations.
6. Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
2
3
ENG
ENG
Before You Start
Table of contents
SETUP
Setup
Accessories
General Features ........................................................................................................6
Disc Type and Characteristics ......................................................................................7
Description-Front Panel ................................................................................................8
Description-Rear Panel ................................................................................................9
Tour of the Remote Control ........................................................................................10
CONNECTIONS
Connections
Choosing a Connection ..............................................................................................12
Remote Control
correctly.
3 Replace the battery cover.
• Check the polarity + - of the
batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked
by obstacles.
• Check if there is any fluorescent
lighting nearby.
Advanced Functions
Adjusting the Aspect Ratio (EZ View) ........................................................................21
Slow Repeat play ........................................................................................................23
Selecting the Audio Language ....................................................................................24
Selecting the Subtitle Language ................................................................................25
Changing the Camera Angle ......................................................................................26
Using the Instant Replay/Skip Function ....................................................................27
Using the Bookmark Function ....................................................................................28
Using the Zoom & 3D Sound Functions..........................................................................29
MP3/WMA Play ..........................................................................................................30
Program Play & Random Play ....................................................................................32
Picture CD Playback ..................................................................................................33
CHANGING
SETUP MENU
the battery cover on the back of
1 Open
the remote.
two AA batteries. Make sure that
2 Insert
the polarities (+ and -) are aligned
If remote doesn’t operate
properly:
Playing a Disc ............................................................................................................14
Using the Search & Skip Functions ..........................................................................16
Using the Display Function ........................................................................................17
Using the Disc and Title Menu ..................................................................................18
Using the Function Menu ..........................................................................................19
Repeat Play ................................................................................................................20
ADVANCED
FUNCTIONS
Install Batteries in the
Remote
Video/Audio Cable
Basic Functions
BASIC
FUNCTIONS
User’s Manual
Batteries for
Remote Control (AA Size)
Changing Setup menu
Using the Setup Menu ................................................................................................35
Setting Up the Language Features ............................................................................36
Setting Up the Audio Options ....................................................................................38
Setting Up the Display Options ..................................................................................39
Setting Up the Parental Control ..................................................................................41
REFERENCE
Reference
Troubleshooting ..........................................................................................................42
Specifications ..............................................................................................................43
Warranty......................................................................................................................44
4
5
ENG
ENG
General Features
Screen
Video with MPEG-2 compression technology.
Both regular and widescreen(16:9) pictures
can be viewed.
Slow Motion
An important scene can be viewed in slow
motion.
Programmed Play
You can program tracks to play in desired
order. (CD, WMA, MP3)
Parental Control
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
Various On-Screen Menu Functions
You can select various languages
(Audio/Subtitle) and screen angles while
enjoying movies.
EZ VIEW
Easy View can convert Letter Box images to
full screen viewing on your conventional TV.
Digital Photo Viewer (JPEG)
You can view the Digital Photos on your TV.
Repeat
You can repeat a song or movie simply by
pressing the REPEAT button.
This DVD player is capable of playing the following types of discs with the
corresponding logos:
Disc Types
(Logos)
Recording Disc Size
Max.
Playing Time
Types
DVD
MP3/WMA
This unit can play discs created from
MP3/WMA files.
Instant Replay
This function is used to replay the previous
10 seconds of the movie from the current
position.
SETUP
Excellent Sound
Dolby Digital, a technology developed by
Dolby Laboratories provides crystal clear
sound reproduction.
Disc Type and Characteristics
12 Cm
Audio
+
Video
8 Cm
AUDIO-CD
Instant Skip
This function skips playback ahead 10 seconds.
Single-sided • DVD contains excellent
240 min.
sound and video due to
Double-sided
Dolby Digital and MPEG-2
480 min.
system.
Single-sided • Various screen and audio
functions can be easily
80 min.
Double-sided selected through the onscreen menu.
160 min.
12 Cm
74 min.
8 Cm
20 min.
Audio
NOTE
Characteristics
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
* Discs which cannot be played with this player.
• DVD-ROM
• DVD-RAM
• CD-ROM
• CDV
• CDI
• HD layer of super Audio CD
• CDGs play audio only, not graphics.
* Ability to play back may depend on recording conditions.
• DVD-R, +R
• DVD+RW, -RW
• CD-RW
* It may not be to play CD-R, CD-RW and DVD-R in
all cases due to the type of disc or condition of the
recording.
Disc Markings
~
• Play
Region
Number
PAL
• PAL broadcast
system in U.K,
France,
Germany, etc.
STEREO
• Dolby
Digital disc
DIGITAL
SOUND
• Stereo disc • Digital
Audio disc
• DTS disc
• MP3 disc
Play Region Number
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from
copy-protected DVD discs.
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
6
7
ENG
ENG
Description-Front Panel
Description-Rear Panel
SETUP
R
2
1
3
4 5 6
7
8
Front Panel Controls
1
1. STANDBY/ON
• When the unit is first plugged in, the indicator
lights. When STANDBY/ON is pressed on again,
the light goes out and the player is turned on.
2. DISC TRAY
• Load the disc here.
5. PLAY/PAUSE (
)
• Begin or pause disc play.
6. STOP (
)
• Stops disc play.
7. SKIP (
/
)
• Use to skip a scene or music.
3. DISPLAY
• Operation indicators are displayed here.
4. OPEN/CLOSE
• Press to open and close the disc tray.
L
8. EZ VIEW
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
2
3 4
5
6
Rear Panel
1. DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital, receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital, MPEG-2 or DTS decoder.
2. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver.
3. VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
4. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture.
The S-Video must be selected in the VIDEO OUT SELECT.
1
5. VIDEO OUT SELECT SWITCH
• Use the switch to set video out. If Scart jack is selected, S-Video may not work.
If S-Video is selected, Scart jack may not work.
3
2
6. SCART AV JACK
• Connect to a TV with scart input jack.
Front Panel Display
1. Disc type indicators
2. Play / Pause / Forward play
3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
NOTE
* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.
8
9
ENG
ENG
Tour of the Remote Control
Tour of the Remote Control
SETUP
DVD Function Buttons
1
13
1. DVD POWER Button
16. PLAY/PAUSE Button (
• Turns the power on or off.
2. NUMBER Buttons
2
17. SKIP Buttons (
• Advances play one frame at a time.
• This function is used to replay the previous 10
seconds of the movie from the current position.
15
16
17
18
8
19
20
9
5. EZ VIEW Button
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
6. SEARCH Buttons (
/
)
• Allows you to search forward/backward through a
disc.
7. STOP Button (
)
8. DISC MENU Button
• Brings up the Disc menu.
9. TITLE MENU Button
• Brings up the Title menu.
10. CLEAR Button
• Use to remove menus or status displays from the
screen.
11. BOOKMARK Button
21
22
23
24
10
11
25
26
27
12
)
18. RETURN Button
• Returns to a previous menu.
4. I.REPLAY Button
3
4
5
6
7
/
• Use to skip the title, chapter, or track.
3. STEP Button
14
)
• Begin/Pause disc play.
12. MENU Button
• Brings up the DVD player’s setup menu.
13. OPEN/CLOSE Button
19. INFO Button
• Displays the current disc mode.
20. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
21. ANGLE Button
• Use to access various camera angles on a DVD.
22. MODE Button
• Allows you to program a specific order.
23. SUBTITLE Button
24. AUDIO Button
• Use this button to access various audio functions
on a disc.
25. REPEAT A-B Button
• Use to mark a segment to repeat between A and
B.
26. REPEAT Button
• Allows you to repeat play a title, chapter, track, or
disc.
27. ZOOM Button
• Enlarges the DVD picture.
• To open and close the disc tray.
14. 3D Button
15. I.SKIP Button
• This function skips playback ahead 10 seconds.
10
11
ENG
ENG
Choosing a Connection
Choosing a Connection
The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Before Connecting the DVD Player
Connection to an Audio System
Method 1
Basic Audio
Method 1
Method 2
Method 3
Good
picture
Better
picture
Best
picture
CONNECTIONS
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner’s manual of the additional components you are connecting for
more information on those particular components.
TV
Method 2
AV Cable
AUDIO
SYSTEM
Scart Cables
(not included)
S-Video
Cable
OR
2ch Amplifier
Dolby Digital Decoder
Audio Input Jacks
Digital Audio Input Jacks
DVD
Player
R
OR
L
OR
Audio Output Jacks
DVD
Player
R
Method 1
DVD Player + 2ch Stereo
Amplifier or Dolby Pro Logic Decoder
Method 2
DVD Player + Amplifier with Dolby
Digital Decoder/DTS Decoder/MPEG-2
Digital Audio Out
S-Video Jack
Method 1
DVD Player + TV with Video Input Jack
Method 2
DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
Method 3
DVD Player + TV with Scart Input Jack (Audio & Video)
(If Scart jack is selected in the VIDEO OUT SELECT.)
L
Analog Audio Out
Video Output Jack
Scart Jack
NOTE
• If Scart Jack is selected, S-Video will not work.
• If S-Video is selected, Scart Jack will not work.
12
13
ENG
ENG
Playing a Disc
Playing a Disc
7 Step Motion Play (Only DVD)
Before Play
• Turn on your TV and press the TV/VIDEO button to select the video
mode.
• Turn on your Audio System and select AUX, CD or DVD.
After plugging in the player, the first time you press the DVD
POWER button, this screen comes up :
If you want to select the language, press a NUMBER button.
(This screen will only appear the very first time you plug in the player.)
SELECT MENU LANGUAGE
Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE (
) to resume normal play.
(You can only perform step motion play in the forward direction.)
8 Slow Motion Play (Only DVD)
Press the
button on the remote during PAUSE or STEP mode.
By pressing the
button, you can select slow motion play for 1/8, 1/4 or 1/2 of normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE (
) to resume normal play.
- Reverse slow motion play will not work.
BASIC
FUNCTIONS
Play
1 Press the OPEN/CLOSE button.
a disc gently into the tray with the disc’s label
2 Place
facing up.
RESUME function
The STANDBY indicator light goes out and the tray opens.
the PLAY/PAUSE (
3 Press
button to close the disc tray.
4
5 Removing Disc
6 Pausing Play
) button or OPEN/CLOSE
Stopping Play
Press the STOP (
When you stop disc play, the player remembers where you stopped, so when you press PLAY (
) again,
it will pick up where you left off. (unless the disc is removed, the STOP (
) button is pressed twice or the
player is unplugged.)
) button during play.
Press the OPEN/CLOSE button.
NOTE
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than 30 minutes, the power will automatically shut off.
(Automatic Power-Off Function)
• If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated. Press the PLAY (
) button to resume normal play.
• This
icon indicates an invalid button press.
Press the PLAY/PAUSE (
) or STEP button on the remote during play.
- Screen stops, no sound.
- To resume again, press PLAY/PAUSE (
) button once again.
14
15
ENG
ENG
Using the Search & Skip Functions
Using the Display Function
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
Searching through a Chapter or Track
Press the
or
on the DVD, CD.
1 During play, press the INFO button on the remote.
the UP/DOWN buttons to select the desired
2 Use
item.
DVD
DVD
Title
Time
3
01
Chapter 02
button on the remote and press again to search at a faster speed
DVD 2X, 4X, 8X, 16X, 32X, 128X
CD
When Playing a DVD/CD
Use the LEFT/RIGHT buttons to make the desired
setup, then press ENTER.
Audio
Subtitle
3D Sound
0:00:13
ENG 5.1CH
Off
Off
• You may use the number buttons of the remote control to
directly access a title, chapter or to start the playback from
the desired time.
2X, 4X, 8X
ENTER
BASIC
FUNCTIONS
make the screen disappear, press the INFO
4 Tobutton
again.
CD
To access the desired title when there is more than
Title one in the disc. For example, if there is more than one
movie on a DVD, each movie will be identified.
Skipping Tracks
CD
Track 01
Time 0:00:48
During play, press the
or
button.
• When playing a DVD, if you press the
button, it moves to the next chapter.
If you press the
button, it moves to the beginning of the chapter.
One more press makes it move to the beginning of the previous chapter.
• When playing a CD, if you press the
button, it moves to the next track.
If you press the
button, it moves to the beginning of the track.
One more press makes it move to the beginning of the previous track.
Most of DVD discs are recorded in chapters so that
Chapter you can quickly find a specific passage (similar to
tracks on an audio CD).
3D Sound
Off
ENTER
Allows playback of the film from a desired time.
Time You must enter the starting time as a reference.
Refers to the language of the film soundtrack. In the
Audio example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different
soundtracks.
Refers to the subtitle languages available in the disc.
Subtitle You will be able to choose the subtitles language or,
if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
A surround sound effect is generated using only two
3D Sound front speakers.
16
17
ENG
ENG
Using the Disc and Title Menu
Using the Function Menu
Using the Disc Menu
Using the Function Menu
the playback of a DVD disc, press the
1 During
MENU button on the remote.
Disc Menu
2
Select Disc Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
1 Press the MENU button during playback.
the UP/DOWN buttons to highlight Function,
2 Use
then press the RIGHT or ENTER button.
DVD
Press ENTER key
for Disc Menu
Title Menu
Disc Menu
Info
Zoom
Title Menu
Function
Function
Bookmark
Repeat
EZ View
Setup
ENTER
RETURN
MENU
3
Function selection screen appears, Info, Zoom,
Bookmark, Repeat and EZ View.
Setup
ENTER
RETURN
MENU
Info (See Page 19)
Zoom (See Page 29)
Bookmark (See Page 28)
Repeat (See Page 20)
EZ View (See Page 21~22)
BASIC
FUNCTIONS
-
the UP/DOWN button to highlight one of the 5
4 Use
functions. Then press the RIGHT or ENTER button
Using the Title Menu
1
DVD
During the playback of a DVD disc, press the
MENU button on the remote.
to access the function.
DVD
Disc Menu
Press ENTER key
for Title Menu
Title Menu
Title Menu using the UP/DOWN buttons,
2 Select
then press the RIGHT or ENTER button.
Function
Setup
ENTER
RETURN
MENU
NOTE
NOTE
• Depending on the disc, the Title and Disc Menus may not work.
• Title Menu will only be displayed if there are at least two titles in the disc.
• You can also use the Title Menu and the Disc Menu, using the TITLE MENU and the DISC MENU buttons
on the remote.
• You can also directly select these functions using thier respective buttons on the remote.
18
19
ENG
ENG
Repeat Play
Adjusting the Aspect Ratio (EZ View)
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
To play back using aspect ratio (DVD)
Press the EZ VIEW button.
• The screen size changes when the button is pressed repeatedly.
• The screen zoom mode operates differently depending on the screen
setting in the initial setup menu.
• To ensure correct operation of the EZ VIEW button, you should set the
correct aspect ratio in the initial setup (See page 40).
When playing a DVD
DVD
1
Press the REPEAT button on the remote.
Repeat screen appears.
Off
Of
Chapter Title A - B
ENTER
Chapter, Title or A-B using the
2 Select
LEFT/RIGHT buttons.
3 Press ENTER.
to normal play, press REPEAT again,
4 Tothenreturn
press the LEFT/RIGHT buttons to select Off.
Press ENTER.
For 16:9 aspect ratio discs
BASIC
FUNCTIONS
* REPEAT A-B
• Press the REPEAT button. Select A-B on screen with the
LEFT/RIGHT buttons or press the 'REPEAT A-B' button on
the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
• To terminate the function, press the 'CLEAR' button or the
'REPEAT A-B' button again.
• A-B REPEAT does not allow you to set point (B) until at least
5 seconds has elapsed after point (A) has been set.
If you are using a 16:9 TV
• Wide Screen
Displays the content of the DVD title in 16:9 aspect ratio.
CD
Off
Track
Disc
A-B
ENTER
• Screen Fit
The top and bottom of the screen are cut off. When playing a
2.35:1 aspect ratio disc, the black bars at the top and bottom of the
screen will disappear. The picture will look vertically stretched.
(Depending on the type of disc, the black bars may not disappear
completely.)
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Wide
Displays the content of the DVD title in 16:9 aspect ratio. The picture
will look horizontally stretched.
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at
the left and right of the screen in order to prevent the picture from
looking horizontally stretched.
NOTE
• DVD repeats play by chapter or title, CD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
20
21
ENG
ENG
Adjusting the Aspect Ratio (EZ View)
Slow Repeat play
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
If you are using a 4:3 TV
For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the screen.
• 4:3 Pan Scan
The left and right of the screen are cut off and displays the central
portion of the 16:9 screen.
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture will look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
For 4:3 aspect ratio discs
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
When playing a DVD
1 During play, press the PLAY/PAUSE ( ) button.
the
button to choose the play speed between 1/8X, 1/4X and 1/2X of
2 Press
normal.
3 Press the REPEAT A-B button to select the point where the function starts. (A)
4 Press the REPEAT A-B button to select the point where the function ends. (B)
ADVANCED
FUNCTIONS
• Screen Fit
The top and bottom of the screen are cut off and the full screen
appears. The picture would look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central
portion of the screen is enlarged.
NOTE
• This function may behave differently depending on the type of disc.
NOTE
• The disc will play from A to B repeatedly at the speed you chose.
• To terminate the function, press the 'CLEAR' button or the 'REPEAT A-B' button again.
• A-B REPEAT does not allow you to set point (B) until at least 5 seconds has elapsed after point (A) has been set.
22
23
ENG
ENG
Selecting the Audio Language
You can select a desired language quickly and easily with the AUDIO button.
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button
Using the AUDIO button
1 Press the AUDIO button.
the LEFT/RIGHT buttons to select the
2 Use
desired language on a DVD.
DVD
ENG
On
the UP/DOWN buttons to determine
3 Use
whether or not the subtitle will be displayed.
- The audio languages are represented by abbreviations.
3
1 Press the SUBTITLE button.
the LEFT/RIGHT buttons to select the
2 Use
desired subtitle language.
ENG
- Initially, the subtitling will not appear on screen.
- The subtitle languages are represented by abbreviations.
Use the LEFT/RIGHT buttons to select Stereo,
LEFT or RIGHT. (On CD)
Off
CD
ADVANCED
FUNCTIONS
NOTE
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same audio language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 37.
• How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 37.
24
25
ENG
ENG
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can select the Angle
function.
Using the Instant Replay function (DVD)
If you miss a scene, you can see it again using
this function.
Using the ANGLE button
Press the ANGLE button to see if an ANGLE
(
) mark is present at the upper left hand
corner of the screen.
1
Using the Instant Replay/Skip Function
When an ANGLE mark is shown, press the
ANGLE button, then an ANGLE select icon
will appear at the upper left hand corner of
the screen.
the LEFT/RIGHT buttons to select the
2 Use
desired screen angle.
- Depending on the disc, the Instant Replay
function may not work.
Using the Instant Skip function (DVD)
Use this function to skip playback 10 seconds
ahead of the current scene.
ADVANCED
FUNCTIONS
turn off the display, press the ANGLE
3 Tobutton
again.
If you press the I.REPLAY button, the current
scene moves backward about 10 seconds, and
plays back.
Press the I.SKIP button.
- Playback will skip ahead 10 seconds.
- Depending on the disc, this function may not work.
26
27
ENG
ENG
Using the Bookmark Function
Using the Zoom & 3D Sound Functions
This feature lets you bookmark sections of a DVD so you can quickly find them at a later
time.
Using the Zoom Function (DVD)
play or pause mode, press the ZOOM button
1 During
on the remote.
Using the Bookmark Function (DVD)
A zoom mark will be displayed on screen.
1
the LEFT/RIGHT buttons to move to the
2 Use
desired bookmark icon.
you reach the scene you want to mark,
3 When
press the ENTER button. The icon will change to
During play, press the BOOKMARK button on the
remote. The Bookmark icons will be displayed.
ENTER
the UP/DOWN or LEFT/RIGHT buttons to select
2 Use
the part of the screen you want to zoom in on.
3 Press the ENTER button.
- During DVD play, press ENTER to zoom in 2X/4X/2X/Normal in
order.
a number (1, 2, or 3).
the BOOKMARK button to turn off the
4 Press
display.
Using the 3D Sound Function
Recalling a Marked Scene
1 – –
CLEAR
the LEFT/RIGHT buttons to select a
2 Use
marked scene.
the PLAY/PAUSE (
3 Press
to the marked scene.
) buttons to skip
NOTE
Clearing a Bookmark
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
(Discs which are recorded with LPCM or DTS will
not work.)
play, press the BOOKMARK button
1 During
on the remote.
the LEFT/RIGHT buttons to select the
2 Use
bookmark number you want to delete.
the CLEAR button to delete a
3 Press
bookmark number. Press the BOOKMARK
• Depending on the disc, the
Bookmark function may not work.
Off
play, press the 3D button.
1 During
The 3D SOUND mark will be displayed on
screen.
• Up to three scenes may be marked
at a time.
the UP/DOWN buttons to turn the
2 Press
3D Sound feature on or off.
ADVANCED
FUNCTIONS
1
During play, press the BOOKMARK button
on the remote.
NOTE
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND
or DOLBY DIGITAL. However, some
of these discs do not contain rear
channel sound signals.
• Depending on the disc, the Zoom and
3D Sound function may not work.
button to turn off the display.
28
29
ENG
ENG
MP3/WMA Play
MP3/WMA Play
When an MP3/WMA Disc is inserted into the DVD player, the first song file of the first folder
plays.
• If more than two file extensions are present, select the media
of your choice by pressing UP/DOWN, then press the ENTER
button.
• To change the currently playing media, press the STOP ( )
button twice and then press the DISC MENU button.
• If no button on the remote controller is pressed for 60 seconds,
the menu will disappear and the selected item will be played.
When playing CD-R/MP3 or WMA discs, please follow all the recommendations for CD-R
above, plus the comments below:
ENTER
• Your MP3 or WMA files should be ISO 9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and W
Download PDF

advertising