Samsung | TC240 | Samsung TC240 Benutzerhandbuch

SyncMaster TC190, TC240
LCD Monitor
User Manual
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.
Table Of Contents
MAJOR SAFETY PRECAUTIONS
Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
INSTALLING THE PRODUCT
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Installing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Installing a Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Connecting to your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Connecting Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Connecting to another Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Connecting a SERIAL Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Connecting to your Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Connecting with a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9
Connecting a Stereo Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Connecting USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Connecting Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
Connecting MIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13
Kensington Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
USING THE PRODUCT
What is a network monitor? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Plug & Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Installing the Device Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Product Operating Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Using the Screen Adjustment Menu (OSD: On Screen Display) . . . . 3-6
INSTALLING THE SOFTWARE
Using Windows XPe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Natural Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
MagicTune . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
MultiScreen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
TROUBLESHOOTING
Monitor Self-Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Before Requesting Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
MORE INFORMATION
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Contact SAMSUNG WORLDWIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only . . . . . . . 6-4
1
Major Safety Precautions
1-1
Before You Start
Icons used in this manual
ICON
NAME
MEANING
Caution
Indicates cases where the function may not work or the setting may be canceled.
Note
Indicates a hint or tip to operate a function.
Using this Manual
•
Make yourself fully aware of the safety precautions before using this product.
•
If a problem occurs, refer to the 'Troubleshooting' section.
Copyright Notice
The contents of this manual are subject to change without prior notice for performance improvement.
Copyright © 2009 Samsung Electronics Co., Ltd. All Rights Reserved.
The copyright of this manual is reserved by Samsung Electronics, Co., Ltd.
The contents of this manual may not be partially or in whole reproduced, distributed or used in any form without the written
permission of Samsung Electronics, Co., Ltd.
The SAMSUNG logo and SyncMaster are the registered trademarks of Samsung Electronics, Co., Ltd.
Microsoft, Windows and Windows NT are the registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are the registered trademarks of the Video Electronics Standard Association.
The ENERGY STAR® logo is the registered trademark of the U.S. Environmental Protection Agency.
All other trademarks mentioned herein belong to their respective companies.
Major Safety Precautions
1-1
1-2
Care and Maintenance
External Surface and Screen Maintenance
Clean the product with a soft, damp cloth.
•
Do not clean the product with an inflammable substance such
as benzene or thinner or with a wet cloth. This may result in a
problem with the product.
•
Do not scratch the screen with your fingernails or a sharp
object.
This may result in scratches or damage to the product.
•
Do not clean the product directly by spraying water onto the
product.
If water enters the product, it may result in fire, electric shock or
a problem with the product.
•
A white stain may be generated on the surface of the highglossy model due to the inherent characteristics of the material,
if a supersonic humidifier is used.
The appearance and the color may differ depending on the
model.
About persistent images
•
Displaying a still image for a long time may create a persistent image or stain on the screen. If you do not use the product for
a long time, set the power-saving mode or screen saver.
•
Due to technological constraints of the LCD Panel manufacturer, the images generated by this product may appear either
brighter or darker than normal by appr. 1ppm (parts per million) pixel.
The number of sub-pixels of an LCD panel by size: The number of Sub-Pixels = Max. Horizontal Resolution x Max. Vertical
Resolution x 3
Example) If the maximum resolution is 1280x1024(1920 x 1080),the number of sub-pixels is 1280x1024(1920 x 1080) x 3
=3,932,160(6,220,800).
1-2
Major Safety Precautions
1-3
Safety Precautions
Icons used for safety precautions
ICON
NAME
MEANING
Warning
Failing to follow the precautions marked with this sign, may result in a serious injury or
even a fatality.
Caution
Failing to follow the precautions marked with this sign, may result in a personal injury or
property damage.
Meaning of Signs
Do not perform.
Must be followed.
Do not disassemble.
The power plug must be unplugged from the
wall outlet.
Do not touch.
Must be grounded to prevent electric shock.
Power Related
The following images are for your reference and may differ depending on models and countries.
Warning
Avoid using a damaged power cord or plug or a
loose power outlet.
Avoid connecting multiple electric appliances to
a single wall outlet.
•
•
Otherwise, it may result in electric shock or
fire.
Avoid plugging in or unplugging the power
supply with wet hands.
•
Otherwise, it may result in fire due to
overheating of the wall outlet.
Plug the power plug in firmly.
•
Otherwise, it may result in fire.
Otherwise, it may result in electric shock.
Make sure to connect the power cord to a
grounded wall outlet (for insulation class 1
equipment only).
Avoid bending or twisting the power cord
excessively and avoid placing heavy objects on
the cord.
•
•
Otherwise, it may result in electric shock or
injury.
Otherwise, it may result in electric shock or
fire due to a damaged power cord.
Keep the power cord and the product away
from a heater.
If the pins of the power plug or the wall outlet
are covered in dust, clean it using a dry cloth.
•
•
Otherwise, it may result in electric shock or
fire.
Major Safety Precautions
Otherwise, it may result in fire.
1-3
Caution
Avoid unplugging the power plug while the
product is operating.
•
Otherwise, it may damage the product due
to electric shock.
When unplugging the power plug from the wall
outlet, make sure to hold it by the plug and not
by the cord.
•
Make sure to use only the power cord supplied
by Samsung. In addition, do not use the power
cord of another electric appliance.
•
Otherwise, it may result in electric shock or
fire.
Connect the power plug to a wall outlet that can
be easily reached.
•
Otherwise, it may result in electric shock or
fire.
When a problem occurs with the product,
you must unplug the power plug to cut the
power off completely. You cannot cut the
power off completely using only the power
button on the product.
Installation Related
Warning
Avoid placing burning candles, mosquitorepellent or cigarettes on the product and
installing the product near a heater.
Ask an installation engineer or relevant
company to install the product onto a wall.
•
Otherwise, it may result in injury.
•
•
Make sure to use the specified wall mount.
Otherwise, it may result in fire.
Avoid installing the product in a badly-ventilated
location such as inside a bookshelf or closet.
•
Otherwise, it may result in fire due to
internal over-heating.
Keep the plastic bags used to pack the product
away from children.
•
If children place the plastic bags over their
heads, they may suffocate.
Avoid installing the product in a location
exposed to dust, moisture (sauna), oil, smoke
or water (rain drops) and installing it within a
vehicle.
•
This may result in electric shock or fire.
Keep a distance of at least 4 inches (10 cm )
from the wall when installing the product for
ventilation.
•
Otherwise, it may result in fire due to
internal over-heating.
Avoid installing the product in a location that is
unstable or exposed to excessive vibrations
such as on an unstable or slanted shelf.
•
The product may fall and this may result in
damage to the product or injury.
•
If you use the product in a location exposed
to excessive vibrations, it may result in a
problem with the product or fire.
Avoid installing the product in a location
exposed to direct sunlight or heat source such
as a fire or heater.
•
This may shorten the product life cycle or
cause fire.
Avoid installing the product at a height where
children may reach it.
1-3
•
If a child touches the product, the product
may fall and this may result in injury.
•
Since the front part is heavier, install the
product on a flat and stable surface.
Major Safety Precautions
Caution
Do not let the product drop while moving it.
•
This may result in a problem with the
product or injury.
When installing the product on a console or
shelf, make sure that the front of the product
does not protrude out of the console or shelf.
•
Otherwise, this may cause the product to
fall off and result in a malfunction or injury.
•
Make sure to use a cabinet or shelf suitable
to the size of the product.
Do not place the product face down on the
floor.
•
This may damage the panel of the product.
When putting the product down, handle it
gently.
•
Otherwise, it may result in a problem with
the product or injury.
If the product is installed in a location where the
operating conditions vary considerably, a
serious quality problem may occur due to the
surrounding environment. In this case, install
the product only after consulting one of our
service engineers about the matter.
•
Places exposed to microscopic dust,
chemicals, too high or low temperature,
high humidity, such as airports or stations
where the product is continuously used for
a long time and so on.
Cleaning Related
Since using a surfactant, which contains a large amount of alcohol, solvent or other strong chemicals, may result
in the discoloration or cracking of the product exterior or the panel surface coming off, be sure to use water only.
Before cleaning the product, unplug the power
cord.
When cleaning the product, do not spray water
directly over the product parts.
•
•
Make sure that water does not enter the
product.
•
Otherwise, it may result in fire, electric
shock or a problem with the product.
Otherwise, it may result in electric shock or
fire.
Major Safety Precautions
1-3
Caution
Avoid spraying cleansing agent directly onto
the product.
•
This may result in discoloration or cracking
of the exterior of the product or the panel
coming off.
When cleaning the product, disconnect the
power cord and clean the product with a
soft,damp cloth.
•
Avoid using chemicals such as wax,
benzene, alcohol, thinner, mosquitorepellent, fragrance, or lubricants when
cleaning the product.
This may result in the exterior being
deformed or the print being removed.
Use a soft, damp cloth with water and wipe
the product with it.
Since the exterior of the product is easily
scratched, be sure to use a proper cleansing
cloth. Use the cleansing cloth with a small
amount of water. However, if the cloth is
contaminated by alien substances, it may result
in scratches to the exterior; therefore shake off
any alien substances from the cloth before
using it.
Since a high voltage runs through the product,
never disassemble, repair or modify the product
yourself.
When cleaning the product, do not spray water
directly over the product parts.
•
Usage Related
Warning
•
Otherwise, it may result in fire or electric
shock.
•
If the product needs to be fixed, contact
a service center.
If the product generates a strange noise, a
burning smell, or smoke, unplug the power
plug immediately and contact a service center.
•
1-3
•
Otherwise, it may result in fire, electric
shock or a problem with the product.
Avoid letting children to hang or climb onto the
product.
•
Otherwise, it may result in the product
falling and this may result in injury or death.
Avoid placing objects such as toys and cookies
on top of the product.
•
Otherwise, it may result in fire or electric
shock.
When thunder or lighting occurs, unplug the
power cord and under no circumstance touch
the antenna cable as this is dangerous.
•
Make sure that water does not enter the
product.
Otherwise, it may result in electric shock or
fire.
If you drop the product or the case is damaged, turn the power off and unplug the
power cord. Contact a service center.
•
•
Otherwise, it may result in electric shock or
fire.
If a child hangs over the product to grab an
object, the object or the product may fall
and this may result in injury or even death.
Avoid dropping an object over the product or
cause impact to the product.
•
Otherwise, it may result in electric shock or
fire.
Major Safety Precautions
Avoid moving the product by pulling the power
cord or antenna cable.
•
Otherwise, it may result in electric shock,
fire or a problem with the product due to
damage to the cable.
When a gas leak occurs, do not touch the
product or the power plug and ventilate
immediately.
•
A spark may result in an explosion or fire.
•
During a thunder or lighting storm, do not
touch the power cord or antenna cable.
Avoid lifting up or move the product by holding
only the power cord or signal cable.
Avoid using or placing inflammable spray or
objects near the product.
•
•
Otherwise, it may result in electric shock,
fire or a problem with the product due to
damage to the cable.
Take care not to block the vent by a table cloth
or curtain.
•
Otherwise, it may result in fire due to
internal overheating.
This may result in an explosion or fire.
Avoid inserting metal objects such as a
chopsticks, coins or hairpins, or inflammable
objects into the product (the vents, ports, etc).
•
If water or an alien substance enters the
product, turn the power off, unplug the
power cord and contact a service center.
•
Otherwise, it may result in a problem with
the product, electric shock or fire.
Avoid placing a liquid container such as a vase,
flowerpot, beverage, cosmetics or drugs, or a
metal object over the product.
•
If water or an alien substance enters the
product, turn the power off, unplug the
power cord and contact a service
center.
•
Otherwise, it may result in a problem with
the product, electric shock or fire.
Caution
Displaying a still image for a long time may
create a persistent image or stain on the
screen.
When not using the product for a long time
such as leaving your home, unplug the power
cord from the wall outlet.
•
•
If you do not use the product for a long time,
use the power-saving mode or set the
screensaver to the moving picture mode.
Otherwise, it may cause dust accumulation
and result in fire caused by overheating or
short circuit or result in an electric shock.
Set the appropriate resolution and frequency
for the product.
Avoid turning the product upside down or move
the product holding only the stand.
•
•
Otherwise, it may result in eye strain.
Watching the product from too close a distance
continuously may damage your eyesight.
Avoid using a humidifier or cooker near the
product.
•
It is important to give your eyes some rest (5
minutes every hour) when viewing the product
screen for long periods of time.
•
This may cause the product to fall resulting
in damage to the product or injury.
Otherwise, it may result in electric shock or
fire.
Since the display panel is hot after using it for a
long time, do not touch the product.
This will alleviate any eye strain.
Major Safety Precautions
1-3
Keep small accessories away from the children.
Take care when adjusting the angle of the
product or the height of the stand.
•
If your hand or finger is caught, you may be
injured.
•
If the product is tilted excessively, the
product may fall and this may result in
injury.
Avoid placing a heavy object over the product.
•
Otherwise, it may result in a problem with
the product or injury.
Maintaining the Correct Posture when Using this Product
Maintain the correct posture when using this product.
1-3
•
Straighten your back.
•
Keep a distance of 45~50 cm(18~ 20inches) from your eyes to the screen. Look down at
the screen and face the screen forwards.
•
Maintain the correct posture when using this product.
•
Adjust the angle of the product so that light is not reflected onto the screen.
•
Keep your elbow at a right angle and keep your arm level with the back of your hand.
•
Keep your elbow at a right angle.
•
Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or
higher and maintain the position of your arm so that your arm is below your heart.
Major Safety Precautions
2
Installing the Product
2-1
Package Contents
•
Unpack the product and check if all of the following contents have been included.
•
Store the packaging box in case you need to move the Product at a later stage.
Monitor
CONTENTS
Installation Manual
Product Warranty
User Manual
Power Cord
OPTIONAL PARTS
Keyboard (USB)
2-2
Mouse (USB)
D-Sub Cable
Installing the Stand
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
Installing the Product
2-1
Place a soft cloth over the table to protect the product and place the product onto the
cloth so that the front of the product is facing downwards.
Do not remove the stopper pin before installing the base.
Hold the main body of the product with your hand as shown by the figure.
Insert the stand base into the stand connection part in the direction shown in the figure.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
2-2
Installing the Product
After the installation of the base, stand the monitor up as shown in the figure. Now you
can remove the stopper pin to adjust the stand.
- Caution
Avoid lifting the product holding only the stand.
Disassembly is in the reverse order of assembly.
2-3
Installing a Wall Mount
Before installation, disassemble the product according to the following steps.
Installing the Product
2-3
Lift up the monitor stand to the maximum angle with your left hand, and remove the back
decoration cover with your right hand, as shown in the figure.
Remove the two screws(A).
Remove the stand arm in the direction shown in the figure.
This product provides a wall mount of 100 mm x 100 mm(200 mm x 100 mm) that complies with the VESA specifications.
100 mm x 100 mm
200 mm x 100 mm
A. Wall Mount Base
B. Wall Mount Kit (Optional)
1. Turn the product off and unplug the power cord from the wall outlet.
2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product face down.
3. Separate the stand.
4. Align the groove of the Monitor's wall mount base with the groove in the wall mount ki and firmly fix the wall mount kit by
fastening the screws.
2-3
Installing the Product
•If you use a screw that is longer than the standard specifications, the inside of the product may be damaged.
•For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending
on the corresponding specifications.
•Do not use screws that are incompatible with the standard VESA specifications and do not assemble them using excessive
force.
This may result in damage to the product or injury due to the product falling. Samsung shall not be held liable for any damage
or injury.
•Samsung shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible with
the specified specifications or due to an installation not performed by an authorized installation engineer.
•When installing the product using a wall mount, purchase a wall mount that provides at least 4 inches (10 cm) of space from
the wall.
•Samsung shall not be held liable for any problems caused by using a stand that is not compatible with the specified
specifications.
•Use a wall mount according to specifications of your country.
2-4
Connecting to your Network
The connecting part may differ depending on the product model.
Connect between the [LAN] port on the product and your network using a LAN cable.
Installing the Product
2-4
2-5
Connecting Power
Connect one end of the power cord to the POWER port of the product and connect the other end of the power cord to a 220V or
110V wall outlet.
(The input voltage is switched automatically.)
2-5
Installing the Product
2-6
Connecting to another Monitor
Connect between the [VIDEO OUT] port on the product and the D-Sub port on your monitor using a D-Sub cable.
Connect to the [VIDEO OUT] port to display the same picture on another monitor.
(For presentation purposes)
Installing the Product
2-6
2-7
Connecting a SERIAL Cable
Devices which support RS-232C connection (interface) can be connected.
2-7
Installing the Product
2-8
Connecting to your Printer
Devices which support D-SUB 25-pin connection (interface) can be connected.
Installing the Product
2-8
2-9
Connecting with a PC
Connect the [RGB IN] port of the product to the [D-Sub] port of your PC with a D-Sub cable.
Use the [RGB IN] port to directly connect the monitor to a PC.
2-9
Installing the Product
2-10 Connecting a Stereo Cable
Connect the [AUDIO IN] port on the rear side of the monitor to the sound card of the PC.
Installing the Product
2-10
2-11 Connecting USB
The
USB port of the monitor supports Full-Speed Certified USB 2.0.
Connect USB devices such as a mouse, keyboard and external storage devices (DSC (Digital Still Camera), MP3, external
storage, etc.).
You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive by connecting them to the
USB port of the monitor without connecting them to the PC.
2-11
Installing the Product
2-12 Connecting Headphones
Connect your headphones to the Headphone connection terminal.
You may connect your headphones to the monitor.
Installing the Product
2-12
2-13 Connecting MIC
Connect the microphone cable to the MIC port on the monitor.
You may connect your microphone to the monitor.
2-13
Installing the Product
2-14 Kensington Lock
A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations.
Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information,
refer to the User Manual supplied with the locking device. You have to purchase an additional locking device.
Locking the product
1. Insert the locking part of the locking device into the hole of the Kensington lock of the product (
direction (
) and turn it in the locking
).
2. Connect the Kensington lock cable.
3. Tie the Kensington lock cable to a desk or heavy object.
You can purchase the locking device from an electronics store or an online shop.
Installing the Product
2-14
3
Using the product
3-1
What is a network monitor?
•
A network monitor can be used for the same purposes as a regular monitor. It also provides the functionalities of most
computers, such as an Internet connection, creating documents, editing images, via a connection to the host PC over the
LAN. In addition, it allows you to connect an external device (DSC, MP3, external storage media) to the USB port and play
music, movies and games.
•
You also can share the screen being displayed on your network monitor with other users by connecting a projector or other
display device to its VGA OUT port. You can use this functionality for video conferencing and a variety of shared tasks.
•
In addition, because Windows XP is installed on your network monitor, you can perform Internet searches and USB memory
searches independently of your host PC.
3-1
Using the product
3-2
Plug & Play
If you turn the power on after purchasing the product, a message regarding the optimal resolution setting appears on the screen.
Select a language and the optimal resolution.
▲/▼ : You can select a language with these buttons.
MENU : If you press this button, the message disappears.
To set the resolution to the optimal resolution.
•
•
Right-click over the Desktop and select 'Properties'
from the pop-up menu.
•
In the 'Settings' tab, set the resolution to the optimal
resolution.
The message appears up to 3 times if the resolution has not been set to the optimal resolution.
Using the product
3-2
3-3
Standard Signal Mode Table
The LCD monitor has one optimal resolution for the best visual quality depending on the screen size due to the inherent
characteristics of the panel, unlike for a CDT monitor.
Therefore, the visual quality will be degraded if the optimal resolution is not set for the panel size. It is recommended setting
the resolution to the optimal resolution of the product.
If the signal from the PC is one of the following standard signal modes, the screen is set automatically. However, if the signal from
the PC is not one of the following signal modes, a blank screen may be displayed or only the Power LED may be turned on.
Therefore, configure it as follows, referring to the User Manual of the graphics card.
TC190
DISPLAY MODE
HORIZONTAL
FREQUENCY (KHZ)
VERTICAL
FREQUENCY (HZ)
PIXEL CLOCK (MHZ)
SYNC POLARITY (H/
V)
IBM, 640 x 350
31.469
70.086
25.175
+/-
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 800
62.795
74.934
106.500
-/+
VESA, 1280 x 960
60.000
60.000
108.000
+/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
TC240
3-3
Using the product
DISPLAY MODE
HORIZONTAL
FREQUENCY (KHZ)
VERTICAL
FREQUENCY (HZ)
PIXEL CLOCK (MHZ)
SYNC POLARITY (H/
V)
IBM, 640 x 350
31.469
70.086
25.175
+/-
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 800
62.795
74.934
106.500
-/+
VESA, 1280 X 960
60.000
60.000
108.000
+/+
VESA, 1280 X 1024
63.981
60.020
108.000
+/+
VESA, 1280 X 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1440 x 900
70.635
74.984
136.750
-/+
VESA, 1600 x 1200
75.000
60.000
162.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
Horizontal Frequency
The time taken to scan one line from the left-most position to the right-most position on the screen is called the horizontal cycle
and the reciprocal of the horizontal cycle is called the horizontal frequency. The horizontal frequency is represented in kHz.
Vertical Frequency
A panel must display the same picture on the screen tens of times every second so that humans can see the picture. This
frequency is called the vertical frequency. The vertical frequency is represented in Hz.
Using the product
3-3
3-4
Installing the Device Driver
If you install the device driver, you can set up the appropriate resolution and frequency for the product. The device driver is
included on the CD-ROM supplied with the product. If the supplied drive file is corrupted, please visit the Samsung
Electronics website(http://www.samsung.com/), and download the driver.
1. Insert the driver installation CD-ROM into the CD-ROM drive.
2. Click on "Windows Driver".
3. Select the model of your product from the model list.
4. Complete the remaining installation steps according to the instructions displayed on the screen.
5. Check if the appropriate resolution and screen refresh rate are displayed in the Control Panel settings. For more information,
refer to the document about the Windows operating system.
3-5
Product Operating Buttons
Product Operating Buttons
The buttons are located on the bottom of the product.
3-4
Using the product
Icon
Description
Press this button to view the On Screen Display (OSD).
MENU/
This button is also used to exit the OSD or to return to a higher-level OSD menu
* Key Lock Function
Locks the buttons to maintain the current settings or to prevent setting changes by other
users.
On: If you press down on the [MENU] button for 5 seconds, the Key Lock function will be set
to On.
Off: If you press the [MENU] button for 5 seconds, the Key Lock function will be set to Off.
Users can set the Customized Key to one of the following functions. If the user presses the
Customized Key[ ] after setting it, the configured function will be performed
<MagicBright> - <MagicColor> - <Color Effect> - <Image Size>
You can set the function of the <Customized Key> by selecting
-> <Customized Key>” in the OSD.
“<SETUP&RESET>
When OSD is not on the screen, push the button to adjust volume.
▲/▼
Adjust items in the menu.
/SOURCE
Use this button to select a function
Press [
/SOURCE] to select the video signal from a connected device while the OSD is
off. (When the [
/SOURCE] button is pressed to change the input mode, a message
appears in the upper left of the screen displaying the current mode).
AUTO
Press [AUTO] button to adjust the screen settings automatically
This function is only available in analog mode.
If the resolution settings are changed in the Display Properties, the <AUTO adjustment>
function is performed.
Press this button to turn the product on or off
3-6
Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
Top Menus
PICTURE
Sub Menus
Brightness
Contrast
Sharpness
MagicBright
Coarse
MagicColor
Red
Green
Blue
Color Tone
Color Effect
Gamma
H-Position
V-Position
Image Size
Menu H-Position
Menu V-Position
Reset
Menu Transparency
Language
Clock
Off Timer
On Timer
On Timer Source
On Timer Volume
Display Time
Customized Key
Fine
COLOR
SIZE & POSITION
SETUP&RESE
T
INFORMATION
Using the product
-
3-6
PICTURE
Menu
Brightness
Description
Controls the screen brightness.
This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.
Contrast
Controls the contrast of the pictures displayed on the screen
This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Sharpness
Controls the clarity of details of pictures displayed on the screen
This menu is unavailable when <MagicBright> is set to <Dynamic Contrast> mode.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
MagicBright
Provides preset picture settings optimized for various user environments such as editing a document,
surfing the Internet, playing games, watching sports or movies and so on.
• <Custom>
If the preset picture modes are not sufficient, you can configure the <Brightness> and <Contrast>
directly using this mode.
• <Text>
This mode provides the picture setting appropriate for editing a document.
• <Internet>
This mode provides the picture setting appropriate for surfing the Internet (text + picture).
• <Game>
This mode provides the picture setting appropriate for playing games that include lots of graphics and
that require a fast screen refresh rate.
• <Sport>
This mode provides the picture setting appropriate for watching sports games that include lots of
movement.
• <Movie>
This mode provides brightness and sharpness settings similar to those of a TV for the best
entertainment environment (movie, DVD, etc.).
• <Dynamic Contrast>
Controls the picture contrast automatically so that bright and dark pictures are balanced overall.
Coarse
Removes vertical noise lines (line pattern) from the screen.
The location of the screen may be changed after the adjustment. In this case, move the screen so
that the screen is displayed at the center of the display panel using the <H-Position> menu.
This function is only available in analog mode.
Fine
Removes horizontal noise lines (line pattern) from the screen.
If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then
use the <Fine> function again.
This function is only available in analog mode.
3-6
Using the product
COLOR
Menu
MagicColor
Red
Description
Expresses natural colors more clearly without changing the picture quality by using proprietary digital
picture quality improvement technology developed by Samsung Electronics.
•
<Off> - Turns the MagicColor function off.
•
<Demo> - You can compare the pictures processed by MagicColor with the original pictures.
•
<Full> - Provides a clearer picture including areas corresponding to skin color.
•
<Intelligent> - Improves the chroma of pictures except for areas corresponding to skin color.
You can adjust the red color value according to your preference.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Green
You can adjust the green color value according to your preference.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Blue
You can adjust the blue color value according to your preference.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Color Tone
You can set the color temperature according to your preference.
•
<Cool> - Sets the color temperature of the screen to a cooler color.
•
<Normal> - Sets the color temperature of the screen to the standard color temperature.
•
<Warm> - Sets the color temperature of the screen to a warmer color.
• <Custom> - Select this menu to set the color temperature manually.
If you do not like the preset color temperatures, you can manually adjust the colors of <Color Effect>.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Color Effect
You can change the overall atmosphere by changing the color of pictures.
This menu is unavailable when <MagicColor> is set to <Full> mode or <Intelligent> mode.
Gamma
•
<Off> - Turns the color effect function off.
•
<Grayscale> -Displays pictures in black and white.
•
<Green> - Displays pictures in green monochrome color.
•
<Aqua> - Displays pictures in aqua monochrome color.
•
<Sepia> - Displays pictures in sepia monochrome color.
Using this menu, you can change the intensity of the colors of medium brightness.
•
<Mode1> - <Mode2> - <Mode3>
<Color> feature is not available when <MagicBright> is set to <Dynamic Contrast> mode.
Using the product
3-6
SIZE & POSITION
Menu
H-Position
Description
Moves the position of the display area on the screen horizontally.
This function is only available in analog mode.
V-Position
Moves the position of the display area on the screen vertically.
This function is only available in analog mode.
Image Size
•
<Auto> - The picture is displayed at the aspect ratio of the input signal.
•
<Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
•
A signal not in the standard mode table is not supported.
•
If the resolution is set to the optimal resolution, the aspect ratio does not change whether the
<Image Size> is set to <Auto> or <Wide>.
Menu H-Position
You can adjust the horizontal position of the OSD.
Menu V-Position
You can adjust the vertical position of the OSD.
SETUP&RESET
Menu
Reset
Description
Use this function to restore the visual quality and color settings to the factory defaults.
•
Menu Transparency
You can select the transparency of the OSD.
•
3-6
<No> - <Yes>
<Off> - <On>
Using the product
Menu
Language
Description
Select a language for the OSD.
The selected language is only applied to the product OSD. This setting does not affect the other
functions of the PC.
Clock
Current Time Setting.
Off Timer
Used to set the product so that it automatically turns off at a certain time.
•
On Timer
Used to set the product so that it automatically turns on at a certain time.
•
On Timer Source
<Off> - <On>
<Off> - <On>
Used to adjust the mode when the product is automatically turned on.
•
<Analog> - <Client>
On Timer Volume
Automatically adjusts the volume to a certain level when the product is turned on.
Display Time
The OSD automatically disappears if no action is taken by the user.
You can determine the time to wait before the OSD is hidden.
•
Customized Key
<5 sec> - <10 sec> - <20 sec> - <200 sec>
You can set the function of the Customized Key to one of the following.
•
<MagicBright> - <MagicColor> - <Color Effect> - <Image Size>
INFORMATION
Menu
INFORMATION
Using the product
Description
Shows the frequency and resolution set on the PC.
3-6
4
Installing the Software
4-1
Using Windows XPe
What is XPe Client?
An Microsoft Windows XP Embedded(XPe) client uses the Microsoft Windows XP Embedded operating system. When an XPe
client is connected to a Citrix ICA server or another server that can provide the Microsoft RDP service, data for the keyboard,
mouse, audio/video and display are transmitted through the network between the client and the server.
Connectable Servers
•
•
A Citrix ICA (Independent Computing Architecture) Server
•
A Microsoft Windows 2000/2003 Server where the terminal services and Citrix MetaFrame are installed
•
A Microsoft Windows NT 4.0 Server where the Citrix MetaFrame is installed
A Microsoft RDP (Remote Desktop Protocol) Server
•
A Microsoft Windows 2000 Server where the terminal services are installed
•
A Microsoft Windows 2003 Server
•
A Microsoft Windows XP Professional
This manual describes the functions provided by the XPe Client. However, it does not explain general functionalities of
Windows XP Embedded. For more general information on Windows XP Embedded , refer to Windows XP Embedded
Help provided by Microsoft.
Logon
When the client starts, you can logon to the server by entering your username and password. The default usernames already
configured are ‘Administrator’ and ‘User’, and their passwords are a space.
Windows XP Embedded Desktop
User
When you log in, the User Desktop appears. The default icons that appear on the User Desktop are Citrix Program
Neighborhood, Remote Desktop Connection and Internet Explorer. You can also run this connection from the Start menu. The
audio volume icon, VNC server icon and system time are displayed on the User Taskbar.
When logged on as a user, there are many restrictions that protect the system from incorrect user actions. You cannot access
the system drives and there are restrictions on configuring properties for them. To configure the client’s advanced and
detailed settings, log on as an administrator.
Administrator
If you logon as Administrator, the Administrator Desktop appears. The default icons that appear on the Administrator Desktop
are My Computer, My Network Places, Citrix Program Neighborhood, Remote Desktop Connection, Internet Explorer, and
Recycle Bin. You can also run the Citrix Program Neighborhood, Remote Desktop Connection, and Internet Explorer from the
Start menu. The audio volume icon, VNC server icon, Enhanced Write Filter status icon, and system time are displayed on the
Administrator Taskbar. The Administrator privilege is required for adding and removing programs.
Log off, Restart, Shut down
4-1
•
To log off the current session, shut down or restart your client, use the Start menu. [Click Start → Shut down]. The Shut
Down Windows dialog box is displayed. Select an operation from the combo box and click OK. You can also log off or shut
down your client using the Windows Security dialog box displayed when pressing the [Ctrl + Alt + Del] keys. If ‘Force Auto
Log on’ is activated, you will be immediately logged on after each log off.
•
The Client Log off, Restart and Shutdown take effect on the operations of the EWF(Enhanced Write Filter). To keep the
Installing the Software
changed system configuration, you must save a cache for the current system session into flash memory. Failing to do so
will cause the changed configuration to be lost when the client is shutdown or restarted. (In the case of logging off, the
configuration is remembered when loggin in again.) For more information on the Enhanced Write Filter, refer to the
Program Help .
Programs
The Remote Desktop Connection
You can control a running terminal server or another computer (Windows 95 or later) remotely through a remote desktop
connection.
•
Remote Desktop
•
Windows XP Professional or Windows 2000/2003 Server must be installed on the computer to be controlled remotely.
This computer is called a host.
•
A remote computer running on an operating system later than Windows 95 is required. This remote computer is called
a client. The client software for the remote desktop connection must be installed on the client.
•
You must also be connected to the Internet. A broadband Internet connection is good for high performance. However,
because the remote desktop transmits a minimum set of data including the display data and keyboard data to control
the host remotely, a broadband Internet connection is not required. You can run a remote desktop on a low bandwidth
Internet connection.
When running a remote desktop on Windows XP Professional, you cannot use the operating system of your
computer.
•
•
Enabling Your Computer as the Host
You must enable the Remote Desktop feature to control it from another computer. You must be logged on as an
administrator or a member of the Administrators group to enable Remote Desktop on your computer. Follow these steps:
•
Open the System folder in the Control Panel. Click Start, point to Settings, click Control Panel, and then double-click
the System icon.
•
On the Remote tab, select the “Allow users to connect remotely to this computer” checkbox.
•
Ensure that you have the proper permissions to connect to your computer remotely, and click OK.
•
Leave your computer running and connected to the client’s network with Internet access.
Start a Remote Desktop Session on the Client
Once you have enabled your host computer to allow remote connections and installed the client software on a Windowsbased client computer, you are ready to start a Remote Desktop session.
You must first establish a virtual private network connection or remote access service connection from your client
computer to your host computer.
1. Click Start, point to Programs, and then click Remote Desktop Connection. Or double-click the Remote Desktop
Connection icon.
The Remote Desktop Connection window will open.
Installing the Software
4-1
2. Enter the host computer name. You can configure detailed settings by clicking the Options button.
The Help file is not available with this Monitor.
3. Options
- General : Enter the login information to connect to the host computer. Enter your username and password to login to
the host automatically.
- Display : The Remote Desktop Connection sends and receives compressed screen data. If you set the resolution and
color quality to the high option, the speed may become slow.
4-1
Installing the Software
- Local Resource : Specify whether to use the hard disks and ports.
- Programs : Specify whether to display the Desktop or run an application whenever you are connected. The default is
‘Desktop’.
- Experience : You can select your connection speed, and select and share environmental options.
Installing the Software
4-1
4. Click Connect. The Log On to Windows dialog box appears.
5. In the “Log On to Windows” dialog box, type your username, password, and domain (if required), and then click OK.
The Remote Desktop window will open and you will see the desktop settings, files, and programs that are on the host
computer.
For more information on Remote Desktop Connections, visit the Microsoft web site.
RealVNC Server
RealVNC (Virtual Network Computing) is a software program that allows you to connect to another computer on a network
and control it remotely. Compared to the Windows terminal service which has a similar function, RealVNC allows only one
administrator to connect to the server at a time. That is, if another is connected to the server as an administrator, the previous
administrator connection will be disconnected.
In RealVNC, the server and the viewer communicate via the VNC protocol. You must install a RealVNC server on the
computer you wish to control remotely, and a VNC viewer on the computer which remotely controls the computer where the
RealVNC server is installed. Hence, the RealVNC server program is installed on a XPe client.
By using this program, you do not have to move directly to the client site to resolve its problems. Instead, you can connect to
the client from the server and solve problems remotely. For this reason, RealVNC is being used.
Only administrators can configure the RealVNC server properties. To display the configuration dialog box for RealVNC,
double-click the RealVNC icon in the system tray. From this dialog box, you can run a VNC server and configure a password
and various properties. The default password is set to ‘Administrator’. Note that it is case-sensitive.
Internet Explorer
A XPe Client includes Internet Explorer. This program is permitted for all users. For more information on Internet Explorer,
visit the Microsoft website.
Enhanced Write Filter
Enhanced Write Filter (EWF) protects a flash volume from write access and consequently, preserves the durability of the flash
device. EWF provides read and write access through a cache to the client instead of allowing direct access to a flash volume.
If EWF is activated, data is not stored to the flash. The data stored in the cache is only effective while the client is operating.
The cached data will be lost when restarting or shutting down your client. Therefore, to store the data written to the registry,
favorites and cookie folders, etc., the content stored in the cache should be transferred to the flash. An error message is
displayed when it is not possible to write to the cache due to a lack of memory. If this message is displayed, you have to
deactivate EWF to flush the EWF cache. The user can double-click the EWF icon on the tray at the bottom right of the screen
4-1
Installing the Software
to call the EWF Manager. A user can also change the EWF configuration by entering EWF management commands at the
command prompt. This task requires the administrator privilege.
•
Enable disk write protection and restart your computer
If the EWF is disabled, enable it. If this item is selected, the cache is flushed and the EWF is enabled. After restarting your
computer, the configurations and file system information for the client are written to a cache. You can also perform this
operation by entering “ewfmgr.exe c: -enable” at the command prompt and restarting your computer.
•
Disable disk write protection and restart your computer
This item is activated when the EWF is running. If this item is selected, the current states of the client (saved in a cache)
are saved to a flash volume and the EWF is disabled. After restarting your computer, the configurations and file system
information for the client are written to a flash volume. You can also perform this operation by entering “ewfmgr.exe c: commitanddisable” at the command prompt and restarting your computer.
•
Write the changes to a disk
This item is activated when the EWF is running. If this item is selected, the current states of the client (saved in a cache)
are saved to a flash volume. However, the state of EWF will not be changed. You can also perform this operation by
entering “ewfmgr.exe c: -commit” at the command prompt.
You can view the configurations for the protected volumes by entering “ewfmgr.exe c:” at the command prompt.
File-Based Write Filter (FBWF)
The File-Based Write Filter (FBWF) protects the memory of the client from being overwritten by any unauthorized user. By
restricting excessive writing into the memory, the FBWF allows you to use the client for a long time. If you request I/O, the
FBWF has the client perform its operations using the cache instead of the memory so that the memory can be protected.
The data saved in the cache is preserved while the client operates normally. It is removed when it is restarted or exited. To
save the changes, you should write the relevant file onto the disk using the commit command. If you don’t know which file is
changed, disable the FBWF, change it, and enable it again.
Installing the Software
4-1
You can control the FBWF using the various options of the fbwfmgr command at a command prompt.
•
•
•
Setting the FBWF
•
Current FBWF status : Displays the current status of the FBWF (Enabled or Disabled).
•
Boot command : Displays the FBWF command that will be performed at the next boot-up.
•
Used memory : Displays the size of the RAM the FBWF is using. If the current status is set to "Disabled", the used
memory is displayed as 0 KB.
•
Maximum memory: Displays the maximum size of the RAM that the FBWF can use.
FBWF Command
•
Enable the FBWF and restart the system : Enables the disabled FBWF and restarts the client. If the client is not
restarted, only the boot command is changed to BWF_ENABLE and the current status is not changed.
•
Disable the FBWF and restart the system : Disables the enabled FBWF and restarts the client. If the client is not
restarted, only the boot command is changed to FBWF_DISABLE and the current status is not changed.
•
Write the changes to the disk : Even if the disks are protected by the FBWF, you can add or delete the files you want to
save on them. To write the changes onto the disk, click the [Write the changes to the disk] button.
Session Status
•
Current session : Displays the volumes being protected by the FBWF and a list of the folders and files on those
volumes that are excepted from protection by the FBWF.
•
Next session : Select the volumes that will be protected by the FBWF when the client is booted up next time. Also,
select the folders and files that you want to except from protection by the FBWF.
Windows Media Player
The XPe Client includes Windows Media Player 6.4. With Windows Media Player, you can play audio and video files on a
website.
Control Panel
The Windows Firewall
The Windows Firewall protects your client further. The Windows Firewall allows you to restrict incoming data to your client
from other computers, thus helping to control your client data more effectively. In addition, it also provides a barrier between
your client and network connections reducing unauthorized access, viruses, and worms across networks.
You can think of a firewall as a sentinel which identifies incoming data from the Internet and other networks. According to the
firewall settings, incoming data to your computer is either permitted or rejected.
The Windows Firewall is, by default, installed and activated on your client. However, your administrator can turn it off. You can
choose and select a different firewall. Therefore, it is not required for you to use the Windows Firewall. Estimate the functions
of other firewalls and choose the best one to fit your requirements. To install and run a different firewall, you must turn off the
Windows Firewall.
4-1
Installing the Software
You must be logged on as administrator to turn the Windows Firewall on or off. Follow these steps to turn the Windows
Firewall on or off.
1. Run the Windows Firewall.
2. Click on one of these options under the General tab.
•
On (recommended) : This is the recommended setting for normal use.
•
On with no exceptions : This settings blocks all unwanted access to your client, including all requests to programs
and services selected in the Exceptions tab. Use this setting when you need to protect your client to the maximum
extent.
•
Off (Not recommended) : Turning off the Windows Firewall may make your client and network more vulnerable to
viruses and intruders.
Configuring Utilities
Local Drive
•
C Drive
The C drive is used for the system. If there is less than 3MB of free space available, the client OS cannot operate.
Therefore, always ensure that there is a sufficient amount of free space available. EWF can help maintain available space
by preventing the C drive being written to directly.
•
Saving Files
Your client uses a fixed size of flash memory. Therefore, it is better to save files to the server rather than to your client.
Mapping a Network Drive
The administrator can map a folder to a network drive. To keep the mapping information after restarting the client, take note of
these directions carefully.
•
Select the Reconnect at logon checkbox in the Map Network Drive dialog box.
•
If the EWF or FBWF is enabled, the changes are saved on the disk.
Installing MUI (Multi-language User Interface)
The MUI Setup program helps you set up languages on the XPe client. In addition, you can delete an original language pack
to extend the available free disk space. If you want to change the default language, standards or formats, use the Regional
Options in the Control Panel.
To add a language to your XPe client, follow these steps:
•
Log on as an administrator.
•
If the EWF or FBWF is enabled, you must disable it before beginning the installation.
•
Click Start and click Run. Type muisetup.exe in the Open box and click OK. A list of languages that can be installed is
displayed as shown below. Log on as an administrator.
•
Select the language you want to install and click Install from the File menu. The installation will begin. Log on as an
administrator.
Installing the Software
4-1
You can delete an original language pack using the Delete menu in the File menu.
This operation deletes the original language pack only and does not delete the copy installed on your XPe Client.
Recover the System
Overview
The XPe Client provides a recovery function which allows you to revert to a backed up system when encountering a serious
problem. You can back up an OS image which is working normally to USB memory or the PXE server. You can revert to a
backed up image when your client has one of these problems:
•
When a system file is deleted accidentally or is corrupted
•
When the client computer is unstable or there is a problem with a device driver
•
When problems occur, after installing a new program or device
•
When the client computer is infected with a virus
•
When Windows XP Embedded fails to start When a system file is deleted accidentally or is corrupted
How to Recover the System
•
•
Recovery Using USB Memory
By following these steps, you can save all necessary files to USB memory, and boot up with the backed up system on the
USB memory and recover the system.
•
Perform system formatting for your USB memory in order to make it bootable.
•
Save the Windows XP Embedded image and the Backup/Recovery Utility which will be recovered later to your USB
memory.
•
Boot up with the USB memory.
•
Recover the system using the Windows XP Embedded image and the Backup/Recovery Utility in the USB memory.
Recovery Using Network Booting
This method is provided through the PXE (Preboot eXecution Environment) server. The PXE sever provides a client/
server interface based on TCP/IP, DHCP, and TFTP. It allows an administrator at a remote location to configure and boot
the operating system onto a client over a network.
•
Implement a PXE server.
•
Save the Windows XP Embedded image and the Backup/Recovery Utility which will be recovered later onto the PXE
server.
•
Boot the client via the network.
•
Recover the system using the Windows XP Embedded image and the Backup/Recovery Utility saved on the PXE
server via the network.
For more information, refer to the PXE Server User Manual.
4-1
Installing the Software
4-2
Natural Color
What is Natural Color?
One of the problems with using a PC is that the colors you see on the screen are different from the colors of printed pictures or
source images input through a scanner or digital camera. Natural Color is a color management system developed by Samsung
Electronics to resolve this problem. This software works with Samsung products only and enables you to adjust the displayed
colors on the screen to match the colors of the printed pictures. For more information, refer to the online help of the software (F1).
The Natural Color is provided online. You can download it from the website below and install;
http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.html
4-3
MagicTune
What is MagicTune?
MagicTune is a software program that helps with monitor adjustments by providing comprehensive descriptions of monitor
functions and easy-to-understand guidelines.
You can adjust the product with the mouse and the keyboard without using the operating buttons of the product.
Installing the Software
1. Insert the installation CD into the CD-ROM drive.
2. Select the MagicTune setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the
MagicTune setup file on the CD-ROM.
3. Select the installation language and click [Next].
4. Complete the remaining software installation steps according to the instructions displayed on the screen.
•
The software may not work properly if you do not restart the computer after the installation.
•
The MagicTune icon may not appear depending on the computer system and the product specifications.
•
If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation (MagicTune™)
The installation of MagicTune™may be affected by the graphics card, motherboard and the networking environment.
System Requirements
OS
•
Windows 2000
•
Windows XP Home Edition
•
Windows XP Professional
•
Windows Vista
For MagicTune™, Windows 2000 or later is recommended.
Installing the Software
4-2
Hardware
•
At least 32MB of memory
•
At least 60MB of free space on the hard disk drive
For more information, refer to the website.
Removing the Software
You can only remove MagicTune™through [Add or Remove Programs ] in Windows.
To remove MagicTune™, complete the following steps.
1. Click [Start] select [Settings], and select [Control Panel] from the menu.
For Windows XP, click [Start], and select [Control Panel] from the menu.
2. Double-click the [Add or Remove Programs] icon in the Control Panel.
3. In the [Add/Remove] window, find and select MagicTune™so that it is highlighted.
4. Click [Change or Remove Programs] to remove the software.
5. Select [Yes] to start removing MagicTune™.
6. Wait until a message box appears informing you that the software has been removed completely.
For technical support, the FAQ (frequently asked questions) or information about the software upgrade for MagicTune™,
please visit our website. (http://www.samsung.com/)
4-4
MultiScreen
What is MultiScreen?
MultiScreen enables users to use the monitor by partitioning multiple sections.
Installing the Software
1. Insert the installation CD into the CD-ROM drive.
2. Select the MultiScreen setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and double-click the
MultiScreen setup file on the CD-ROM.
3. When the Installation Wizard appears, click [Next].
4. Complete the remaining software installation steps according to the instructions displayed on the screen.
The software may not work properly if you do not restart the computer after the installation.
•
The MultiScreen icon may not appear depending on the computer system and the product specifications.
•
If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation (MultiScreen)
The MultiScreen installation may be affected by the graphics card, motherboard and the networking environment.
4-4
Installing the Software
Operating System
OS
•
Windows 2000
•
Windows XP Home Edition
•
Windows XP Professional
•
Windows Vista
For MultiScreen, the operating systems Windows 2000 or later is recommended.
Hardware
•
At least 32MB of memory
•
At least 60MB of free space on the hard disk drive
Removing the Software
Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs].
Select MultiScreen from the program list and click the [Add/Delete] button.
Installing the Software
4-4
5
Troubleshooting
5-1
Monitor Self-Diagnosis
•
You can check if the product is working properly using the Self-Diagnosis function.
•
If a blank screen is displayed and the Power LED blinks even if the product and the PC are properly connected, perform
the self-diagnosis function according to the procedures below.
1. Turn the product and the PC off.
2. Separate the signal cable from the product.
3. Turn the product on.
4. If the product is working properly, the <Check Signal Cable> message appears.
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The product
is working properly.
5-2
Before Requesting Service
Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest
Samsung Electronics Service Center.
A blank screen appears / I cannot turn the product on
Is the power cord connected properly?
Check the connection status of the power cord.
Is the <Check Signal Cable> message displayed on the
screen?
Check the cable connecting the PC and the product.
Is the <Not Optimum Mode> message displayed on the
screen?
This occurs when the signal from the graphics card exceeds
the maximum resolution or the maximum frequency of the
product.
If the message appears on the screen even if the cable is
properly connected, recheck the input signal by pressing the
/SOURCE button of the product.
In this case, set up the appropriate resolution and the frequency for the product.
Is a blank screen displayed and does the power LED blink at
a 1 second interval?
This occurs when the power saving function is running.
If you click the mouse or press any key, the screen will be
turned on.
The on screen adjustment menu (OSD) does not appear.
Did you cancel the screen adjustment?
Check if the <OSD Adjustment Lock> function is set to Off.
The color is weird / The picture is displayed in black and white
Is the entire screen displayed in the same color as if viewing
the screen through a cellophane paper?
Check the cable connection to the computer.
Reinsert the graphics card into the computer completely.
Check if the <Color Effect> is set to <Off>.
Is the graphics card configured correctly?
5-1
Set up the graphics card referring to the user manual.
Troubleshooting
The display area suddenly moves to an edge or to the center.
Did you change the graphics card or the driver?
Please press the [AUTO] button to run the auto adjustment
function.
Did you change the resolution and frequency appropriate to
the product?
Set the resolution and the frequency to the appropriate values
in the graphics card
Refer to the (Standard Signal Mode Table)
Is the graphics card configured correctly?
Set up the graphics card referring to the user manual.
The pictures are out-of-focus.
Did you change the resolution and the frequency appropriate
to the product?
Set the resolution and the frequency to the appropriate values
in the graphics card
Refer to the (Standard Signal Mode Table)
The color is displayed in 16 bit (16 colors). The color has been changed after changing the graphics card.
Did you install the device driver for the product?
Windows ME/XP/2000 : Set the color again by selecting Control Panel → Display → Settings.
Is the graphics card configured correctly?
Configure the color again in accordance with the new graphics card driver.
When I connect the monitor, the 'Unknown monitor, Plug&Play (VESA DDC) monitor found' message is displayed.
Did you install the device driver for the product?
Install the device driver referring to the descriptions about the
driver installation.
Check if all the Plug&Play (VESA DDC) functions are supported referring to the User Manual of the graphics card.
Install the device driver referring to the descriptions about the
driver installation.
A “beep, beep” sound is heard when booting the computer.
If the beep sound is generated 3 or more times when booting up the computer, please request service for the computer.
Problems related to Audio
No sound
Ensure that the audio cable is firmly connected to both the
audio-in port on your monitor and the audio-out port on your
sound card.
Check the volume level.
Sound level is too low.
Check the volume level.
If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card
or software program.
Troubleshooting
5-2
5-3
FAQ
FAQ!
How can I change the frequency of the video signal?
Please try the following!
You have to change the frequency of the graphics card.
(For more information, refer to the User Manual of the computer or the graphics card.)
How can I change the resolution?
Windows XP : Change the resolution by selecting Control
Panel → Appearance and Themes → Display → Settings.
Windows ME/2000 : Change the resolution by selecting Control Panel
→ Display → Settings.
(For more information, refer to the User Manual of the computer or the graphics card.)
How can I use the power saving function?
Windows XP : Configure it by selecting Control Panel →
Appearance and Themes → Display → Screen Saver Setting or configure it in the BIOS Setup of the computer.
Windows ME/2000 : Configure it by selecting Control Panel
→ Display → Screen Saver Setting or Configure
it in the
BIOS Setup of the computer.
For more information, refer to the Windows user manual for
the computer.
5-3
Troubleshooting
6
More Information
6-1
Specifications
MODEL NAME
LCD Panel
Synchronization
TC240
Size
19 inches (48 cm)
23.6 inches (59 cm)
Display area
376.32 mm (H) X 301.056 mm (V) /
14.8 inches (H) X 11.9 inches (V)
521.28 mm (H) X 293.22 mm (V) /
20.5 inches (H) X 11.5 inches (V)
Pixel Pitch
0.294 mm (H) X 0.294 mm (V) / 0.012
inches (H) X 0.012 inches (V)
0.2715 mm (H) X 0.2715 mm (V) /
0.0107 inches (H) X 0.0107 inches (V)
Horizontal
30~81 kHz
Vertical
56~75 Hz
Display Color
Resolution
TC190
16.7 M
Optimum resolution
1280 x 1024 @ 60 Hz
1920 X 1080 @ 60 Hz(RB)
Maximum resolution
1280 x 1024 @ 60 Hz
1920 X 1080 @ 60 Hz(RB)
RGB Analog
Input Signal, Terminated
0.7 Vp-p ± 5 %
Separate H/V sync, Composite, SOG
TTL Level (V high ≥ 2.0 V, V low ≤ 0.8 V)
Maximum Pixel Clock
135 MHz (Analog/Digital)
Power Supply
This product supports 100 – 240 V. Since the standard voltage may differ from
country to country, please check the label on the back of the product
Signal connectors
15pin-to-15pin D-sub cable, Detachable
Dimensions (WxHxD) / Weight
410.7 x 385.6 x 197.0 mm / 16.2 x 15.2
x 7.8 inches / 6.45 Kg / 14.2 Ibs
VESA Mounting Interface
100 mm x 100 mm / 3.9 inches x 3.9 inches
Environmental
considerations
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Operating
170 MHz (Analog)
568.6 x 385.2 x 226.0 mm / 22.4 x
15.2 x 8.9 inches / 8.85 kg / 19.5 Ibs
Humidity :10 % ~ 80 %, non-condensing
Storage
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Class B (Information Communication equipment for residential use)
This device has been registered regarding EMI for home use (Class B). It may be used in all areas. (Class B equipment
emits less electromagnetic waves than Class A equipment.)
More Information
6-1
6-2
Power Saving Function
This product provides a power saving function that automatically turns the screen off when the product is not used for a
predetermined period of time to reduce power consumption. If the product enters power saving mode, the power LED turns to a
different color to indicate that the product is in power saving mode.
When the product is in power saving mode, the power is not turned off and you can turn the screen on again by pressing any key
or clicking the mouse. However, the power saving function only works when the product is connected to a computer that provides
the power saving function.
STATE
NORMAL OPERATION
POWER SAVING MODE
POWER OFF(POWERBUTTON)
Power Indicator
Blue
Blinking
Blinking
Power Consumption
TC190 : 45 watts
Less than
0 watts
TC240 : 65 watts
2.7 watts
If there is no power cut-off switch, the power consumption is "0" only when the power cord is disconnected.
6-2
More Information
6-3
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
NORTH AMERICA
U.S.A
1-800-SAMSUNG(726-7864)
http://www.samsung.com/us
CANADA
1-800-SAMSUNG(726-7864)
http://www.samsung.com/ca
MEXICO
01-800-SAMSUNG(726-7864)
http://www.samsung.com/mx
LATIN AMERICA
ARGENTINA
0800-333-3733
http://www.samsung.com/ar
BRAZIL
0800-124-421
http://www.samsung.com/br
4004-0000
CHILE
800-SAMSUNG(726-7864)
http://www.samsung.com/cl
COLOMBIA
01-8000112112
http://www.samsung.com/co
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin
ECUADOR
1-800-10-7267
http://www.samsung.com/latin
EL SALVADOR
800-6225
http://www.samsung.com/latin
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin
HONDURAS
800-7919267
http://www.samsung.com/latin
JAMAICA
1-800-234-7267
http://www.samsung.com/latin
NICARAGUA
00-1800-5077267
http://www.samsung.com/latin
PANAMA
800-7267
http://www.samsung.com/latin
PUERTO RICO
1-800-682-3180
http://www.samsung.com/latin
REP. DOMINICA
1-800-751-2676
http://www.samsung.com/latin
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
http://www.samsung.com/latin
VENEZUELA
0-800-100-5303
http://www.samsung.com/latin
EUROPE
AUSTRIA
0810 - SAMSUNG(7267864,€ 0.07/min)
http://www.samsung.com/at
BELGIUM
02 201 2418
http://www.samsung.com/be (Dutch)
http://www.samsung.com/be_fr
(French)
CZECH REPUBLIC
800 - SAMSUNG (800-726786)
http://www.samsung.com/cz
DENMARK
8 - SAMSUNG (7267864)
http://www.samsung.com/dk
EIRE
0818 717 100
http://www.samsung.com/ie
FINLAND
30 - 6227 515
http://www.samsung.com/fi
FRANCE
01 4863 0000
http://www.samsung.com/fr
GERMANY
01805 - SAMSUNG (7267864,€ 0.14/
Min)
http://www.samsung.de
More Information
6-3
EUROPE
HUNGARY
06-80-SAMSUNG(726-7864)
http://www.samsung.com/hu
ITALIA
800-SAMSUNG(726-7864)
http://www.samsung.com/it
LUXEMBURG
02 261 03 710
http://www.samsung.com/lu
NETHERLANDS
0900 - SAMSUNG (0900-7267864) (€
0,10/Min)
http://www.samsung.com/nl
NORWAY
3 - SAMSUNG (7267864)
http://www.samsung.com/no
POLAND
0 801 1SAMSUNG (172678)
http://www.samsung.com/pl
022 - 607 - 93 - 33
PORTUGAL
808 20 - SAMSUNG (7267864)
http://www.samsung.com/pt
SLOVAKIA
0800-SAMSUNG(726-7864)
http://www.samsung.com/sk
SPAIN
902 - 1 - SAMSUNG (902 172 678)
http://www.samsung.com/es
SWEDEN
0771 726 7864 (SAMSUNG)
http://www.samsung.com/se
SWITZERLAND
0848-SAMSUNG(7267864, CHF 0.08/
min)
http://www.samsung.com/ch
U.K
0845 SAMSUNG (7267864)
http://www.samsung.com/uk
CIS
BELARUS
810-800-500-55-500
ESTONIA
800-7267
http://www.samsung.com/ee
LATVIA
8000-7267
http://www.samsung.com/lv
LITHUANIA
8-800-77777
http://www.samsung.com/lt
MOLDOVA
00-800-500-55-500
KAZAKHSTAN
8-10-800-500-55-500
KYRGYZSTAN
00-800-500-55-500
RUSSIA
8-800-555-55-55
TADJIKISTAN
8-10-800-500-55-500
UKRAINE
8-800-502-0000
http://www.samsung.com/kz_ru
http://www.samsung.ru
http://www.samsung.com/ua
http://www.samsung.com/ua_ru
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com/kz_ru
ASIA PACIFIC
AUSTRALIA
1300 362 603
http://www.samsung.com/au
CHINA
400-810-5858
http://www.samsung.com/cn
010-6475 1880
HONG KONG
3698 - 4698
http://www.samsung.com/hk
http://www.samsung.com/hk_en/
INDIA
3030 8282
http://www.samsung.com/in
1-800-3000-8282
1800 110011
INDONESIA
0800-112-8888
http://www.samsung.com/id
JAPAN
0120-327-527
http://www.samsung.com/jp
6-3
More Information
ASIA PACIFIC
MALAYSIA
1800-88-9999
http://www.samsung.com/my
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com/nz
PHILIPPINES
1-800-10-SAMSUNG(726-7864)
http://www.samsung.com/ph
1-800-3-SAMSUNG(726-7864)
1-800-8-SAMSUNG(726-7864)
02-5805777
SINGAPORE
1800-SAMSUNG(726-7864)
http://www.samsung.com/sg
THAILAND
1800-29-3232, 02-689-3232
http://www.samsung.com/th
TAIWAN
0800-329-999
http://www.samsung.com/tw
VIETNAM
1 800 588 889
http://www.samsung.com/vn
MIDDLE EAST & AFRICA
SOUTH AFRICA
0860-SAMSUNG(726-7864)
http://www.samsung.com/za
TURKEY
444 77 11
http://www.samsung.com/tr
U.A.E
800-SAMSUNG(726-7864)
http://www.samsung.com/ae
8000-4726
More Information
6-3
6-4
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other commercial wastes for disposal.
6-4
More Information
Download PDF