Samsung | S-2000 | Samsung S-2000 Benutzerhandbuch

ELECTR
INTERIOR AUDIO
S-2000
Instruction Manual
Safety Warnings
GB
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND
INTER LOCKS DEFEATED, AVOID EXPOSURE
TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
Wiring the Main Power Supply Plug(UK Only)
IMPORTANT NOTICE
The main lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin
face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same
colour as the fuse fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should
obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the
plug to a main socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a main socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the main lead are coloured in accordance with the following code:–
BLUE = NEUTRAL
BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN
AND YELLOW.
2
Thank you for buying this
SAMSUNG Audio system.
Contents
Please take time to read these instructions.
They will allow you to operate your
system with ease and take full advantage
of its features.
SAFETY WARNINGS .......................................................................................................................................................... 2
INSTALLING YOUR MINI-COMPACT SYSTEM
Front Panel View .............................................................................................................................................................. 4
Rear Panel View .............................................................................................................................................................. 5
Connecting the AM Aerial ................................................................................................................................................ 6
Connecting the FM Aerial ................................................................................................................................................ 6
Setting the Clock .............................................................................................................................................................. 7
CD-PLAYER
Listening to a Compact Disc ............................................................................................................................................ 8
Selecting a Track .............................................................................................................................................................. 9
Searching for a Specific Music Passage on a CD ............................................................................................................ 9
Repeat Function.............................................................................................................................................................. 10
Programming the Order of Playback .............................................................................................................................. 11
Checking or Changing Programmed Tracks .................................................................................................................. 12
TUNER
Searching for and Storing the Radio Stations .............................................................................................................. 13
Selecting a Stored Station .............................................................................................................................................. 14
Improving Radio Reception ............................................................................................................................................ 14
OTHER FUNCTIONS
About RDS broadcasting .............................................................................................................................................. 15
Timer Function ................................................................................................................................................................ 18
Cancelling the Timer ...................................................................................................................................................... 19
Power Sound Function.................................................................................................................................................... 19
Snooze Function ............................................................................................................................................................ 20
Setting the System to Switch Off Automatically.............................................................................................................. 21
Selecting an Equalizer Preset ........................................................................................................................................ 21
Connecting Headphones ................................................................................................................................................ 22
RECOMMENDATIONS
FOR
USE
Precautions When Using Compact Discs ...................................................................................................................... 22
Safety Precautions .......................................................................................................................................................... 23
Before Contacting the After-Sales Service .................................................................................................................... 24
Technical Specifications .................................................................................................................................................. 25
Symbols
Press
Push
Important
Note
3
GB
Front Panel View
GB
,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,,
,,,,,,
,,,,,,
,,,,,,
1
20
2
19
3
17
18
4
On/Standby
5
6
7
8
Open/Close
16
Timer
On/Off – Check
Mono/St
Timer/Clock
Band
PTY
Function
RDS
/Tuning Mode
Sleep
Display
Prog./Set
Repeat
Phones
P.Sound
Volume
Snooze
Preset EQ
12
11
9
10
1. Play/Pause button
11. Volume button
2. Band button
12. Preset EQ button
3. Mono/St button
13. Power Sound button
4. On/Standby button
14. Repeat button
5. Timer On/Off – Check button
15. Prog./Set button
6. Timer/Clock button
16. Display (RDS)
7. Sleep button
17. PTY (RDS)
8. Headphone Jack Connector
18. Open/Close button
9. Snooze button
19. Stop/Tuning Mode button
10. CD Track or Radio Station Search
4
15
14
13
20. Function button
Rear Panel View
GB
ANTENNA
FM
(75Ω)
AM
1 2
ANTENNA
FM
(75Ω)
AM
1. FM Aerial Connector Terminal
2. AM Aerial Connector Terminal
5
Connecting the AM Aerial
GB
The AM aerial (for long and medium waves) can be:
Placed on a stable surface
Fixed to the wall (you must first remove the base)
1
To connect a wire, push the terminal tab downwards and hold it in position
2
Insert the wire, up to the plastic sheathing, in the hole.
3
Release the tab
FM
AM
Connecting the FM Aerial
How to connect a COAXIAL TYPE aerial.
Connect a 75Ω antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system.
Follow the instructions given on Page 13 to tune into a radio station, and determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).
FM
FM AERIAL
(supplied)
6
FM
FM
75Ω COAXIAL CABLE
(not supplied)
Setting the Clock
,,,
,,
GB
Your system is equipped with a clock which allows you to turn
your system on and off automatically. You should set the clock:
When you purchase the audio system
After a power failure
After unplugging the unit
1
On/Standby
Timer
On/Off – Check
2
Timer/Clock
Remember to reset the time when the clock changes from
winter to summer time and vice versa.
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby.
2
Press Timer/Clock twice.
Result: CLOCK is displayed.
3
Press Prog./Set.
Result: The hour flashes.
4
Band
Function
Sleep
Phones
4,6
Volume
Snooze
Open/Close
RDS
PTY
To...
Mono/St
Function
Display
3,5,7
/Tuning Mode
Prog./Set
Repeat
Press...
Increase the hours
Decrease the hours
5
When the correct hour is displayed, press Prog./Set.
Result: The minutes flash.
6
To...
Volume
4,6
P.Sound
Preset EQ
Press...
Increase the minutes
Decrease the minutes
7
When the correct time is displayed, press Prog./Set.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing Timer/Clock once.
7
,,,
Listening to a Compact Disc
GB
St
2,4
Open/Close
RDS
Display
PTY
Function
1
8
/Tuning Mode
5,7
When you have loaded a compact disc into the player, you can
begin playback.
Always treat your compact discs with care; refer, if necessary, to the section entitled “Precautions When Using Compact Discs” on page 22.
Prog./Set
Repeat
1
Select the CD function by pressing Function on the front panel.
2
Press the Open/Close button.
Result: The compartment opens.
3
Place your disc in the compartment, with the label on the disc facing
upwards.
4
Close the compartment by pressing the Open/Close button.
5
Press Play/Pause ( ) to start playing the disc.
Result: The display indicates the selected track and elapsed playing time.
6
Adjust the volume as required by:
Pressing the Volume
and
P.Sound
Volume
e
Preset EQ
6
7
To pause during playback, press Play/Pause (
Press Play/Pause (
8
buttons.
).
) again to continue playing the disc.
Press Stop ( ) when you have finished.
If you press Play/Pause ( ) when no disc is loaded, the
“NO DISC” indication is displayed.
8
Selecting a Track
You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
To start playback at the beginning of the...
Next track
Current track
Previous track
Track of your choice
Press...
once
once
twice
or
the appropriate
number of times.
,,
Op
dby
er
Check
Mono/St
Clock
Band
PTY
Function
RDS
/Tuning Mode
p
D
Pro
R
es
P
Volume
Snooze
Preset EQ
,,
Searching for a Specific Music Passage on a CD
When listening to a compact disc, you can quickly search for a
specific music passage on a track.
To search through the tracks...
Forwards
Backwards
Press and hold down...
for at least one second
for at least one second
Op
dby
er
Check
Mono/St
Clock
Band
PTY
Function
p
D
Pro
R
es
It is recommended that you turn the volume down before using this
function.
RDS
/Tuning Mode
P
Volume
Snooze
Preset EQ
9
GB
,,
Repeat Function
GB
Open/Close
PTY
Function
RDS
/Tuning Mode
You can repeat:
A specific track on a compact disc.
All tracks on the compact disc.
Display
Prog./Set
This function is not available when playing a disc in a random
sequence.
Repeat
P.Sound
Volume
Preset EQ
1
2
10
Press the Repeat button.
To repeat the...
Press Repeat..
Current track indefinitely
Disc
Once (RPT 1 is displayed)
Twice (RPT ALL is displayed)
When you wish to stop the Repeat function, press Repeat a third time.
Result: RPT OFF is displayed.
,,
,,
Programming the Order of Playback
GB
You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
Open/Close
You can programme up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
This feature can be combined with the Repeat function.
PTY
Function
1,8
RDS
/Tuning Mode
Display
2,4
Prog./Set
Repeat
P.Sound
1
2
If the CD function is selected, stop the player by pressing Stop ( ).
Press Prog./Set.
Result: The following indications are displayed:
Volume
Preset EQ
Op
dby
(P01 = Programme No., – – = Track No. on the disc)
3
Select the required track by pressing:
to move back through the tracks
to move forward through the tracks
r
Check
Mono/St
lock
Band
p
es
PTY
3,7
Function
3,7
6
RDS
/Tuning Mode
D
Pro
Re
P
Volume
Snooze
4
Press Prog./Set to confirm your selection.
Result: The selection is stored and
is displayed.
5
To select other tracks, repeat Steps 3 to 4.
6
Press Play/Pause (
programmed.
7
To...
Press...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards
one or more tracks
once
twice
once
or
the appropriate
number of times
8
Preset EQ
) to listen to the track selection in the order
To cancel the selection, press Stop ( ).
Once if the compact disc player is stopped
Result: PROGRAM is no longer displayed.
If you open the compartment, the selection is cancelled.
11
,,
,,,
Checking or Changing Programmed Tracks
GB
You can check or change your selection of tracks at any time.
Open/Close
PTY
1
Function
RDS
/Tuning Mode
1
2
Display
2,3,4,6
Prog./Set
Repeat
Press Stop ( ) once if you have started listening to the selection.
Press Prog./Set.
Result: The following indications appear:
(C = Check, 01=Program NO., – – = Track No. on the disc)
P.Sound
Volume
Preset EQ
r
heck
ock
3
Press Prog./Set again.
Result: The first track selected is displayed, together with the letter C
(Change).
4
Press Prog./Set one or more times until the track to be changed is
displayed.
5
Press
6
Press Prog./Set to confirm your change.
7
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
Ope
dby
Mono/St
Band
RDS
PTY
Function
5
7
/Tuning Mode
5
Di
Pro
Re
s
If you have already programmed 24 tracks, C is displayed instead of
P when you press Prog./Set.
and
to select a different track.
P.S
Volume
Snooze
12
Preset EQ
,,
,,,
,,,
Searching for and Storing the Radio Stations
GB
You can store up to:
15 FM stations
8 MW station
7 LW station
1
On/Standby
1
Switch the system on by pressing On/Standby.
2
Select the TUNER function by pressing Function on the front panel.
3
Select the required frequency band by pressing Band again on the front
panel.
Result: The appropriate indication is displayed:
FM
Frequency Modulation
AM(MW)
Medium Wave
LW
Long Wave
4
To search for a station...
One or more times until MANUAL
is displayed.
One or more times until AUTO is
displayed.
Manually
Automatically
5
6
7
Press Tuning Mode on the
front panel
Adjust the volume by:
Pressing the Volume
Mono/St
Timer/Clock
Band
3
2
Function
Phones
Volume
P
Snooze
Ope
dby
heck
Mono/St
ock
Band
PTY
Function
buttons.
Select the stereo or mono mode by pressing Mono/St.
RDS
4
/Tuning Mode
Di
Prog
Re
5,8
5,8
Volume
Snooze
P.S
Preset EQ
Open/Close
PTY
or
/Tu
Sleep
s
Select the station to be stored by:
Pressing
or
on the front panel
To scroll through the frequencies faster when searching manually, hold
down the
or
buttons.
The automatic search procedure may stop on a frequency that does
not correspond to a radio station. If this happens, use the manual
search mode.
7
Timer
On/Off – Check
Function
RDS
/Tuning Mode
Display
8
Prog./Set
Repeat
6
P.Sound
Volume
Preset EQ
8
If you do not want to store the radio station found, revert to Step 4 and
search for another station.
Otherwise:
a Press Prog./Set.
b Press
and
to assign a programme number between 1 and 15.
c Press Prog./Set to store the radio station.
9
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station to an
existing programme number.
13
,,
Selecting a Stored Station
GB
1
You can listen to a stored radio station as follows:
On/Standby
Timer
On/Off – Check
Mono/St
Timer/Clock
Band
3
P
2
Function
/Tuni
1
Switch the system on by pressing On/Standby.
2
Select the TUNER function by pressing Function on the front panel.
3
Select the required frequency band by pressing Band on the front panel.
4
Select the radio station as follows.
Sleep
Phones
Volume
Snooze
Pres
Op
dby
r
Check
Mono/St
lock
Band
PTY
Function
RDS
/Tuning Mode
p
To listen to...
Press...
A stored station
a Press Tuning Mode until “PRESET”
is displayed.
D
Pro
Re
es
Snooze
4
Volume
4
Another station
P
Preset EQ
b TUNING
and
to select the
required programme.
TUNING
and
until the required
frequency is displayed.
Press Tuning Mode again to exit the stored station selection function.
,,
Improving Radio Reception
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them
permanently
On/Standby
Timer
On/Off – Check
Mono/St
Timer/Clock
Band
Function
Sleep
Phones
Volume
Snooze
14
/
If reception from a specific FM radio station is poor, press Mono/St to
switch from stereo mode to mono. The quality of the sound will be
improved.
About RDS broadcasting
,,
,,,
GB
This unit has the RDS (Radio Data System) function, which
enables for the various information such as broadcasting station, radio text, time and 17 types of programs (News, Rock,
Classic, etc.) to be received from the FM RDS station together
with normal radio signal.
1
On/Standby
Timer
On/Off – Check
Mono/St
Timer/Clock
Band
P
Function
/Tuni
Sleep
1
Press the On/Standby ON button.
Phones
Volume
Snooze
2
Receive the FM radio.
See the radio receiving method on the page 13.
FM and frequency are shown on the display
If the received station transmit the RDS information, 'RDS' appears
automatically on the display.
3
Press the RDS Display button to select the desired RDS mode.
Whenever the button is pressed, RDS mode changes as follows.
Pres
Open/Close
PS NAME
RT
CT
Current FM frequency
St
PTY
Function
RDS
/Tuning Mode
Display
Prog./Set
3
Repeat
The RDS function is available only on FM broadcasts.
Description on RDS function
P.Sound
Volume
ze
Preset EQ
1. PTY (Program Type) : Displays the type of programme currently being
broadcast
2. PS NAME (Program Service Name) : Indicates the name of broadcasting station and is decodes (if any) composed of 8 characters.
3. RT (Radio Text) : The text broadcast by a station and composed of
maximum 64 characters.
4. CT (Clock Time) : Decodes the real time clock from the FM frequency.
Some stations may not transmit PTY, RT or CT information therefore
this may not be displayed in all cases.
5. TP (Traffic Program) : Indicates that the turned station is capable of
transmitting traffic broadcasts.
6. TA (Traffic Announcement) : When this symbol flashes it shows that
the traffic announcement is in progress.
7. EON (Enhanced Other Networks Information) : Offers the RDS information on other networks.
15
,,,
About RDS DISPLAY function
GB
About "PS NAME" MODE
Open/Close
St
PTY
Function
RDS
/Tuning Mode
Display
Prog./Set
3
Repeat
P.Sound
Volume
ze
Preset EQ
Displays the name of broadcasting station.
Press the RDS Display button to select the PS NAME.
"PS NAME" appears on the display.
If the PS information is being received, the PS name (BBC, AFO, NDR,
etc.) is shown on the display.
If the PS information isn't received, the original FM frequency is shown.
Even though no RDS Display button is pressed, the reception of PS
information ensures the PS name is displayed.
About 'RT' MODE
Displays the character transmitted from the broadcasting station.
Press the RDS Display button to select the RT MODE.
"RT" appears on the display.
If the RT information is being received, the received information is
shown on the display.
If the RT information isn't received, the "NO RT" is shown.
On the display.
About CT(Clock Time)
Sets the time of the RDS clock.
To select the CT time, set the RDS Display button to CT MODE.
The CT information will take up to 2 minutes to be decoded therefore
the clock isn't displayed immediately.
If there is no available CT information, "NO CT" is displayed.
The CT RDS clock does not update the system clock.
16
,,,
,,
PTY (Program Type) indication and PTY-SEARCH function (Continue)
GB
The PTY information is composed of an identification symbol, which helps
the FM radio to recognize the program type of each FM station.
The 17 PTY modes are shown in the display by pressing the PTY button.
Open/Close
PTY
RDS – Display
Display
PTY – RDS
St
Program Type
Display
Function
/Tuning Mode
2
Prog./Set
Repeat
• News including an announced opinion and report
NEWS
P.Sound
AFFARIS
INFO
• Several matters including a current incident, documentary,
discussion and analysis.
• Information including weights and measures, returns and forecast, matters interesting the customer, medical information, etc.
SPORT
• Sports
EDUCATE
DRAMA
• Drama-Radio serial, etc.
CULTURE
SCIENCE
VARIED
POP M
• Education
• Culture-National or local culture including the religious problem, social
science, language, theater,etc.
• Natural science and technology
• Others-Speech, amusing program (quiz, game), interview,
comedy and satirical play, etc.
• Pop music
• Rock music
M.O.R.M
• M.O.R- Comfortable music, occasionally vocal
ALARM
• Light classical music- Classical music and instrumental
and chorus music
• Heavy classical music-Orcastra music, symphony, chamber
music and opera
• Other music - Jazz, R&B, country music
• Alarm
TRAFFIC
• Traffic information
CLASSIC
OTHER M
Preset EQ
O
andby
ROCK M
LIGHT M
Volume
ze
mer
– Check
Mono/St
r/Clock
Band
PTY
RDS –
PTY – RDS
Function
/Tuning Mode
P
eep
nes
2
Snooze
Volume
2
Preset EQ
About PTY-SEARCH
1
Tuned to an FM station broadcasting a PTY MODE.
See the FM receiving method on the page 13.
If the received station is transmitting the RDS information, "RDS" lights up.
2
Press the PTY button.
The PTY MODE(NEWS, AFFARIS, etc) appears on the display.
Press the
or
button to select the desired PTY MODE.
If the station is transmitting no PTY information, 'NO PTY' shows on
the display.
When the PTY MODE is selected(The PTY MODE is shown in the display), press the PTY KEY once again to convert into PTY-SEARCH
MODE and auto-search the station sequentially.
If a station is found broadcasting required PTY MODE then the search
stops and the stop is selected.
If the PTY MODE isn’t found it is returned to the original station frequency at beginning the PTY SEARCH and auto-search and PTY
SEARCH are suspended.
17
,,
,,
,,,
Timer Function
GB
On/Standby
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
1,9
Timer
On/Off – Check
Mono/St
Timer/Clock
Band
If you no longer want the system to be switched on or off automatically, you must cancel the timer.
2
Function
/
Sleep
Phones
Volume
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
Snooze
Open/Close
PTY
RDS
3,4,5,6,7,8
Function
/Tuning Mode
1
2
Switch the system on by pressing On/Standby.
3
Press Prog./Set.
Result: ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.
4
Set the timer switch-on time.
Display
Prog./Set
Repeat
P.Sound
Volume
Preset EQ
ock
a
Set the hour by pressing
b
Press Prog./Set.
Result: The minutes flash.
c
Set the minutes by pressing
d
Press Prog./Set.
Result: OFF TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-off time already set;
you can now set the timer switch-off time.
Ope
dby
heck
Press Timer/Clock until TIMER 1 or TIMER 2 is displayed.
Two timers (TIMER1, TIMER2) can be set in this equipment.
Mono/St
Band
PTY
Function
4,5,6,7
RDS
/Tuning Mode
4,5,6,7
s
Di
5
and
.
and
.
Set the timer switch-off time.
Prog
a
Set the hour by pressing
Re
b
Press Prog./Set.
Result: The minutes flash.
c
Set the minutes by pressing
d
Press Prog./Set.
Result: VOL XX is displayed, where XX corresponds to the volume already set.
P.S
and
.
Volume
Snooze
Preset EQ
and
.
6
Press
and
to adjust the volume level and press Prog./Set.
Result: The source to be selected is displayed.
7
Press
8
9
and
to select the source to be played when the system switches on.
If you select..
You must also...
TUNER (radio)
a Select the FM or AM frequency band by pressing
b Press Prog./Set.
c Select a preset station by pressing
and
.
CD (compact disc)
a Load a compact disc.
and
Press Prog./Set to confirm the timer.
Press On/Standby to set the system to standby mode.
Result: TIMER is displayed to the bottom left of the time, indicating that the timer has
been set. The system will switch on and off automatically at the required times.
If the timer switch on and off times are identical, the word ERROR is displayed.
18
.
Cancelling the Timer
,,
GB
After having set the timer, it will start automatically as
shown by the TIMER indication on the display. If you no
longer wish to use the timer, you must cancel it.
On/Standby
You can stop the timer at any time (system on or in standby
mode).
To...
Press Timer On/Off-Check...
Cancel the timer
XX is no longer displayed.
Restart the timer
XX is displayed again.
Timer
On/Off – Check
Mono/St
Timer/Clock
Band
P
Function
/Tun
Sleep
Phones
Volume
Snooze
Pre
To switch to the Timer Check mode, press and hold the
Timer On/Off-Check button for a while.
Power Sound Function
This audio system is equipped with the function of Power
Sound, which amplifies bass and improves high key or bass
twice as much for you to appreciate powerful real surroundsound.
,,
Open/Close
PTY
Function
1
2
Press P. Sound button on the front panel.
Result: The P. Sound button on the front panel lights up green.
P SOUND is displayed for a few seconds.
A more powerful resonant sound is diffused.
To cancel this function, press P. Sound again.
RDS
/Tuning Mode
Display
Prog./Set
Repeat
1,2
P.Sound
Volume
Preset EQ
19
,,
,,,
,,
Snooze Function
GB
On/Standby
While in the Snooze mode, the volume increases 5 levels every 5
minutes.
Example: This feature can be used for a morning call.
1,8
Timer
On/Off – Check
Mono/St
Timer/Clock
Band
In 30 minutes after the Snooze mode starts, the power turns off
automatically.
Function
Sleep
2,4
Phones
Volume
Snooze
Snooze
Ope
dby
heck
Mono/St
ock
Band
PTY
4,5,6
Function
RDS
/Tuning Mode
4,5,6
Di
Switch the system on by pressing On/Standby.
2
Press the Snooze button for 2 sec or longer.
Result: “SNOOZE” appears on the display and the button light comes on
and flashes.
3
Press Prog./Set.
Result: ON TIME is displayed (instead of the equalizer symbols) for a
few seconds, followed by any switch-on time already set; you can
set the timer switch-on time.
4
Set the snooze switch-on time.
Prog
P.S
Volume
Snooze
1
Re
s
Preset EQ
Before setting the Snooze, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
While in the Snooze mode, the other buttons will not work. The
power can be turned off only using the Snooze button.
Open/Close
PTY
RDS
3,4,5,6,7
Function
/Tuning Mode
a
Set the hour by pressing
b
Press Prog./Set.
Result: The minutes flash.
Repeat
c
Set the minutes by pressing
P.Sound
d
Press Prog./Set.
Display
Prog./Set
Volume
and
and
.
.
Preset EQ
5
Press
and
to adjust the volume level and press Prog./Set.
Result: The source to be selected is displayed.
6
Press
and
switches on.
to select the source to be played when the system
If you select...
You must also...
TUNER (radio)
a Select the FM or AM frequency
band by pressing
and
.
b Press Prog./Set.
c Select a preset station by pressing
and
.
CD (compact disc)
a Load a compact disc.
7
Press Prog./Set to confirm the Snooze.
8
Press On/Standby to set the system to standby mode.
The Snooze function cannot be combined with the Timer function.
When the Snooze button is pressed for 2 sec or longer, it is ready
to be set.
20
,,,
Setting the System to Switch Off Automatically
GB
While listening to a compact disc or a cassette, you can set the
system to switch off automatically.
Example: You wish to go to sleep to music.
1
On/Standby
Press Sleep.
Result: Playback starts and the following indications are displayed:
Timer
On/Off – Check
Mono/St
Timer/Clock
Band
Function
Sleep
SLEEP
90 MIN
Phones
Volume
2
Snooze
Press Sleep one or more times to indicate how long the system should
continue playing before it switches off:
At any time, you can:
Check the remaining time by pressing Sleep.
Change the remaining time by repeating steps 1 and 2.
3
Press Sleep one or more times until SLEEP is displayed.
Result: The system will automatically switch off at the end of disc or cassette.
4
To cancel Sleep function, press SLEEP one or more times until OFF is
displayed.
Selecting an Equalizer Preset
,,
Your audio system is equipped with a preset equalizer that
allows you to choose the most appropriate balance between treble and bass frequencies, according to the type of music you
are listening to.
Open/Close
PTY
Press Preset EQ on the front panel until the required option is selected.
Function
RDS
/Tuning Mode
Display
Prog./Set
Repeat
To obtain a...
Select...
Normal balance (linear)
Balance suitable for classic music
Balance suitable for rock music
Balance suitable for pop music
PASS
CLASSIC
ROCK
POP
P.Sound
Volume
Preset EQ
21
,,,
Connecting Headphones
GB
You can connect a set of headphones to your Audio system so
that you can listen to music or radio programmes without disturbing other people in the room. The earphones must have a
3.5 mm jack or an appropriate adapter.
On/Standby
Timer
On/Off – Check
Mono/St
Timer/Clock
Band
Function
Sleep
Connect the headphones to the Phones
jack on the front panel.
Result: The loudspeakers are no longer used to output the sound.
Phones
Volume
Snooze
Prolonged use of headphones at a high volume may damage your
hearing.
Precautions When Using Compact Discs
Handle your compact discs with care.
Always hold them by the edges to avoid leaving fingerprints on the
shiny surface.
When you have finished playing a compact disc, always put it back in
its case.
Do not fix paper or adhesive tape to the discs and do not write on the
label.
Clean them with a special-purpose cloth.
Store your compact discs in a clean place, out of direct sunlight, where
they will not be exposed to high temperatures.
Always use compact discs marked
.
COMPACT
DIGITAL AUDIO
22
Safety Precautions
GB
The following diagrams illustrate the precautions to be taken when using or moving your audio
system.
,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,,
Ambient operating conditions:
Ambient temperature
Humidity
5°C-35°C
10-75%
,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,,
Do not place potted plants or vases on top of the unit.
Moisture entering the unit could lead to dangerous electric
shock and can cause equipment damage. In such events
immediately disconnect the main plug from the socket.
,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,,
Do not expose the unit to direct sun radiation
or other heat sources. This could lead to overheating and malfunction of the unit.
,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,,
During thunderstorms, disconnect the main
plug from the socket. Main voltage peaks due
to lightning could damage the unit.
,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,,
Do not place heavy items on the main lead. Main
cable damage can lead to damage of the equipment (fire hazard) and can cause electric shock.
Do not remove any equipment panels. The inside of
the unit contains live components, which cause electric shock.
23
Before Contacting the After-Sales Service
GB
It always takes a little time to become familiar with a new appliance. If you have any of the problems listed below, try the
solutions given. They may save you the time and inconvenience of an unnecessary service call.
Problem
The system does not work
G
E
N
E
R
A
L
There is no sound
Incase it is not worked, even the action is taken
as above.
• The main lead is not correctly plugged into a wall
socket or the wall socket is not switched on.
• The On/Standby button has not been pressed.
• The volume has been completely turned down.
• The correct function (TUNER, CD, AUX) has not
been selected.
• You have connected a set of earphones.
• Press the Preset EQ button for 5 seconds in power
‘OFF’(standby), then it is returned the original position (RESET)
The Timer does not work
• The timer has been stopped by pressing Timer
on/off.
The compact disc player does not start playing
• The CD function has not been selected.
• The disc has been inserted face down or is either
dirty or scratched.
• The laser sensor is dirty or dusty.
• The system has not been installed on a flat, horizontal surface.
• Condensation has formed in the player; leave the
system in a warm, airy room for at least one hour.
Reception is poor or no radio stations are
received at all
• The TUNER function has not been selected.
• The radio frequency has not been correctly selected.
• The aerial has been disconnected or is not facing
the right way. Turn it until you find the best orientation.
• You are in a building that blocks radio waves; you
must use an outside aerial.
C
D
R
A
D
I
O
Checks/Explanation
If the above guidelines do not allow you to solve the problem, take a note of:
The model and serial numbers, normally printed on the rear of the system
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG after-sales service.
24
Technical Specifications
GB
SAMSUNG strives to improve its products at all times. Both the design specifications and these user
instructions are thus subject to change without notice.
RADIO
LW
Usable sensitivity ......................................................................................................................................................................... 60 dB
MW (AM)
Signal/noise ratio .......................................................................................................................................................................... 35 dB
Usable sensitivity ......................................................................................................................................................................... 56 dB
Total harmonic distortion ................................................................................................................................................................ 2 %
FM
Signal/noise ratio .......................................................................................................................................................................... 45 dB
Usable sensitivity ......................................................................................................................................................................... 10 dB
Total harmonic distortion ............................................................................................................................................................. 0.3 %
COMPACT DISC PLAYER
Frequency range ......................................................................................................................................... 20 Hz - 20 KHz (± 1 dB)
Signal/noise ratio ..................................................................................................................................... 90 dB (at 1 KHz) with filter
Distortion .................................................................................................................................................................. 0.05 % (at 1 KHz)
Channel separation ...................................................................................................................................................................... 80 dB
Disc sizes ..................................................................................................................Diameter: 120 or 80 mm. Thickness: 1.2 mm
AMPLIFIER
Output power (3.2Ω) ...................................................................................... 2 x 5 Watts RMS (total harmonic distortion: 10 %)
Channel separation ...................................................................................................................................................................... 55 dB
Signal/noise ratio .......................................................................................................................................................................... 70 dB
GENERAL
Dimensions .................................................................................................................................... 563 (W) x 277 (H) x 142 (D) mm
25
THIS APPLIANCE IS MANUFACTURED BY:
ELECTRONICS
AH68-00214X
Download PDF