Samsung | MM-J320 | Samsung 20 W 2.2Ch Mini Audio System J320 Benutzerhandbuch

MM-J320
MM-J330
Micro Component System
MP3-CD/WMA-CD/CD-R/RW Playback
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
MM-J320-EN-ENG-20161103-cms.indd 1
2016/11/3 9:06:49
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USERSERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT AND INSERT FULLY.
WARNING
• To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
• TO PREVENT THE SPREAD
OF FIRE, KEEP CANDLES AND
OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important
instructions accompanying the product.
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
Complies with 21CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50, dated
June 24, 2007.
DANGER :
• VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM. (FDA 21 CFR)
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM. (IEC 60825-1)
• THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE. DO
NOT OPEN THE COVER AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
2
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
English
MM-J320-EN-ENG-20161103-cms.indd 2
2016/11/3 9:06:49
Precautions
• Ensure that the AC power in your house matches
the requirements listed on the identification
sticker located on the back of your product.
• Install your product horizontally, on a suitable
base (furniture), with enough space around it for
ventilation (3 - 4 inches/7.5 - 10 cm).
• Do not place the product on amplifiers or other
equipment which may become hot. Make sure
the ventilation slots are not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc Insert
Slot is empty.
• To turn off the product completely, disconnect the
AC plug from the wall outlet. Disconnect the AC
plug from the wall outlet if you will be leaving the
device unused for a long period of time.
• During thunderstorms, disconnect the AC
plug from the wall outlet. Voltage peaks due to
lightning could damage the product.
• Do not expose the product to direct sunlight or
other heat sources. This could cause the product
to overheat and malfunction.
• Protect the product from moisture and excess
heat and equipment creating strong magnetic or
electric fields (i.e. speakers.).
• Disconnect the power cable from the AC wall
outlet if the product malfunctions.
• This product is for personal use only. It is not
intended for industrial use.
• Condensation may occur if your product or a
disc has been stored in cold temperatures. If
transporting the product during the winter, wait
approximately 2 hours until the product has
reached room temperature before using.
• The batteries used with this product contain
chemicals that are harmful to the environment. Do
not dispose of batteries in the general household
trash.
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Use only a properly grounded plug and
receptacle.
-- An improper ground may cause electric shock
or equipment damage. (Class l Equipment
only.)
Disc Storage & Management
• Holding Discs
-- Fingerprints or scratches on a disc may reduce
sound and picture quality or cause skipping.
-- Avoid touching the surface of
a disc where data has been
recorded.
-- Hold the disc by the edges so that fingerprints
will not get on the surface.
-- Do not stick paper or tape on the disc.
• Cleaning Discs
-- If you get fingerprints or dirt on a disc, clean it
with a mild detergent diluted in water and wipe
with a soft cloth.
-- When cleaning, wipe gently from
the inside to the outside of the
disc.
• Disc Storage
-- Do not keep in direct sunlight.
-- Keep in a cool, ventilated area.
-- Keep in a clean, protective jacket and store
vertically.
• Condensation may form if warm air comes into
contact with cold parts inside the product. When
condensation forms inside the product, it may
not operate correctly. If this occurs, remove the
disc and let the product stand for 1 or 2 hours
with the power on.
• Place the loudspeakers at a reasonable distance
on either side of the system to ensure good
stereo sound.
• Direct the loudspeakers towards the listening
area.
• Do not expose this apparatus to dripping or
splashing. Do not place objects filled with liquids,
such as vases, on the apparatus.
English
MM-J320-EN-ENG-20161103-cms.indd 3
3
2016/11/3 9:06:49
Disc and Format Compatibility
This product does not support Secure (DRM)
Media files.
CD-R Discs
• Some CD-R discs may not be playable
depending on the disc recording device (CDRecorder or PC) used to burn music onto the
disc and the condition of the disc.
• Use 650MB/74 minute CD-R discs.
Do not use CD-R discs over 700MB/80 minutes
as they may not be played back.
• Some CD-RW (Rewritable) media may not be
playable.
• Only CD-Rs that are properly "closed" can be
fully played. If the session is closed, but the disc
is left open, the product may not be able to fully
play the disc.
• If a file is encoded in the Variable Bit Rate (VBR)
format,( i.e. files encoded in both low bit rate and
high bit rate - 32Kbps ~ 320Kbps), the sound
may skip during playback.
• A maximum of 999 files can be played per CD.
Supported Audio Formats
*.mp3
MP3-CD Discs
• Only CD-R discs with MP3 files in ISO 9660 or
Joliet format can be played.
• MP3 file names should contain no blank spaces
or special characters (for example, /, =, +).
• Use discs recorded with a compression/
decompression data rate greater than 128Kbps.
• Only consecutively written multisession discs
can be played. If there is a blank segment in a
Multisession disc, the disc can be played only up
to the blank segment.
• If a disc is not closed, it will take longer to begin
playback and not all of the recorded files may
play.
Audio
Codec
Sampling
Rate
Bit Rate
MPEG 1 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2.5
Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
Wave_Format_
MSAudio1
16KHz ~
48KHz
56Kbps ~
128Kbps
Wave_Format_
MSAudio2
16KHz ~
48KHz
56Kbps ~
128Kbps
File
Extension
*.wma
➣➣Does not support the WMA Professional codec.
➣➣The table above shows supported formats, sampling rates, and bit rates. Files recorded in formats that are not supported may not be played
properly.
Accessories
Check for the supplied accessories below.
FM Antenna
User's Manual
Symbols
4
Important
Remote Control/Batteries
Note
English
MM-J320-EN-ENG-20161103-cms.indd 4
2016/11/3 9:06:50
Contents
Thank you for buying this SAMSUNG Component System.
Please take time to read these instructions.
They will allow you how to operate your system and take full advantage of its features.
Safety Warnings........................................ 2
10 Skip Track...................................... 11
Precautions............................................... 3
Listening to Radio................................... 11
Disc Storage & Management................... 3
Using Bluetooth...................................... 12
Disc and Format Compatibility................ 4
TV SoundConnect................................... 14
Supported Audio Formats........................ 4
Setting the Clock.................................... 14
Accessories............................................... 4
Timer Function........................................ 15
Contents.................................................... 5
Cancelling the Timer............................... 15
Description................................................ 6
Recording Function................................ 16
Front/Top Panel................................... 6
Selecting EQ Mode................................ 17
Rear Panel............................................ 7
Software update...................................... 17
Remote Control................................... 8
Troubleshooting...................................... 18
CD/MP3/WMA-CD Playback................... 9
Specifications.......................................... 19
Selecting a Track....................................... 9
Searching for a Specific Music
Passage on a CD.................................... 10
Repeat One or All Tracks on a
Compact Disc......................................... 10
10 Skip Track........................................... 10
Playing a USB Device............................. 10
To Select a Track from
a USB Device..................................... 10
To Search a Folder Quickly............... 10
To Use High Speed Search............... 10
To Repeat one or all Tracks.............. 10
`` Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
`` An administration fee may be charged if either
a. an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read
this user manual)
b. you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this
user manual).
`` The amount of such administration charge will be advised to you before any work or home visit is carried out.
English
MM-J320-EN-ENG-20161103-cms.indd 5
5
2016/11/3 9:06:50
Description
Front/Top Panel
1
2
3
4 5
6
7
!
5V 500mA AUX IN
9 8
0
1
2
3
4
5
6
7
POWER button
Press this button to switch your product
on or off.
Function button
AUX IN JACK
8
STOP button
PLAY/PAUSE button
OPEN/CLOSE button
9
VOLUME CONTROL + button !
VOLUME CONTROL - button
0
1. Use the Audio Cable (not supplied) to connect
AUX IN on the player to Audio Out on the
external analog component.
2. Press
to switch the input mode to AUX.
• If no button actions for more than 8 hours in
AUX mode, the power will automatically turn off.
USB jack
DISC tray
Display Panel
USING THE TOUCH BUTTON
¡¡ Tap on touch screen with your fingertip.
¡¡ To avoid damage to the touch screen, do not use any object other than your fingers to operate it.
¡¡ Do not tap on the touch screen if your fingers are not clean.
¡¡ Do not tap on the touch screen with gloves on.
¡¡ The touch screen may not function if you use your fingernail or other instrument such as a ballpoint pen.
6
English
MM-J320-EN-ENG-20161103-cms.indd 6
2016/11/3 9:06:50
Rear Panel
3
2
1
1. ONLY FOR SERVICE
• This jackis for service only. Please do not use.
2. FM Antenna Connector Terminal
1. Connect the FM antenna (supplied) to the FM
Antenna jack.
2. Slowly move the antenna wire until you find a
location where reception is good, then fasten
it to a wall or other rigid surface.
3. 2.0 CH Speaker Connector Terminals
The speaker connector terminals are located on
the rear of the system.
1. To achieve the correct sound quality, insert the
speaker connector cables identified below into
the correct speaker terminals on the back of
the system.
• Left speaker (marked L).
• Right speaker (marked R).
3. If reception is poor, you may need to install an
outdoor antenna. To do so, connect an
outdoor FM antenna to FM antenna jack on
the rear of the system using a 75Ω coaxial
cable (not supplied).
English
MM-J320-EN-ENG-20161103-cms.indd 7
7
2016/11/3 9:06:51
Remote Control
Power
TIMER CLOCK
TIMER ON/OFF
USB REC
Search backwards
STOP
Skip /RDS PTY*
EQ
VOLUME (–)
MO/ST
FUNCTION
SLEEP (Set a sleep time to shut off the
product.)
REPEAT
+10
Search-forwards
PLAY/PAUSE
Skip/RDS DISPLAY*
MUTE (Turn off the sound temporarily. Press
again to turn the sound back on.)
TUNING/ALBUM
VOLUME (+)
ENTER
TUNING MODE
TUNING/ALBUM
* This product may not have the RDS function.
Installing Batteries In The Remote Control
• Place batteries in the remote control so that the
polarities match the illustrations in the battery
compartment : (+) to (+) and (–) to (–).
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or overheat
the batteries.
• There is the danger of an explosion if you
replace the batteries with the wrong battery
type. Replace only with the same or equivalent
type.
• The remote control can be used up to approximately 23 feet (7 meters) in a straight
line from the system.
8
* Battery size: AAA
English
MM-J320-EN-ENG-20161103-cms.indd 8
2016/11/3 9:06:51
CD/MP3/WMA-CD Playback
Lets you play 12 cm compact discs without an adapter.
This product is designed to play audio CDs, CDs, CD-Rs, CD-RWs, or MP3/WMA-CDs.
• Gently open or close the CD tray. Do not apply excessive
force.
• Do not apply force toor place a heavy object on the
product.
• Do not insert an out-of-spec, shaped CD such as a
heart or octangle shaped CD. You can damage the
product.
• For the best sound, maintain your compact discs
carefully and correctly.
1. P
ress the OPEN/CLOSE button to open the
disc tray.
2. Place a disc gently into the tray with the disc's
label facing up.
3. Press the OPEN/CLOSE button to close the
disc tray. The disc will be played automatically.
• For MP3/WMA-CD audio, it may take several
minutes to finish scanning the disc tracks.
• If you play a file with an English name or a MP3/
WMA-CD medium with an English title, the song
title will be shown in the display. (Other languages
besides English may not be displayed.)
• An English-titled track containing a special
character will not display.
<CD/MP3/WMA-CD Playback Display>
Track Indicator
+
1 0:19
Playtime Indicator
4. Adjust the volume by:
• Tuning the VOLUME knob on the unit or pressing
the Vol + or – button of the remote control.
• The volume level can be adjusted in 31 steps
(VOLUME MIN, VOLUME 01 - VOLUME 29, and
VOLUME MAX).
5. To pause playback temporarily, press the
PLAY/PAUSE (p) button. Press PLAY/PAUSE
(p) again to continue playing the disc.
• Keep the tray closed whenever you are not using it
to prevent dust from entering.
• You can load or unload a compact disc when the
radio, USB or auxiliary source function is selected.
Also, when you press the OPEN/CLOSE button,
the product will automatically change to the MP3/
CD mode.
• If no buttons are pressed on the product or remote
control for more than 3 minutes when the product
is in Pause mode, the product will change to Stop
mode.
• If no buttons are pressed on the product or remote
control for more than 25 minutes when the product
is in Stop mode or no Disc mode, the power will
automatically turn off.
Selecting a Track
You can select a desired track while a disc is
being played.
To play the previous track
Press the [ button within 3 seconds after the
current track starts playing.
Press the [ button twice, 3 seconds or more
after the current track starts playing.
To play the next track
Press the ] button.
To play the current track from the beginning
Press the [ button once, 3 seconds after the
current track starts playing.
To play the track of your choice
Press the [ or ] button to move to a desired
track.
• You can select a track directly without the [ or
] button. (refer to the page 10)
6. To end playing, press the STOP (@) button.
• If there is no CD inserted in the DISC tray, the unit
displays “NO DISC”.
• The quality of MP3/WMA-CD playback may vary
depending on the condition of the disc containing
the music files or the condition of the recorder with
which the disc was created.
• If different types of files or unnecessary folders
are on the same disc, you will have problems with
playback.
English
MM-J320-EN-ENG-20161103-cms.indd 9
9
2016/11/3 9:06:52
Searching for a Specific Music
Passage on a CD
When listening to a compact disc, you can quickly search for a specific music passage on a track.
1. Press the (, ) buttons for Search Function.
Press ...
CDDA
MP3/WMA
(1➞(2➞(3➞(4
(4
)1➞)2➞)3➞)4
)4
• The product does not play audio when in the (
,) 3 or ( ,) 4 fast search mode.
Playing a USB Device
Connect an external storage device such as a USB
flash memory stick or external HDD (Hard Disk
Drive) to the product. You can play files in MP3/
WMA format.
Before you begin! • Connect the external USB storage device to your product.
• Select the USB mode by pressing the
button on the
main unit or select USB by pressing the FUNCTION
button on the remote control.
• The first track of the first directory plays automatically.
➣➣To stop playing
Press the STOP ( @ ) button to stop playing.
➣➣To remove the USB device
Repeat One or All Tracks on a
Compact Disc
You can play a CD, a group of tracks in a folder, or
a single track repeatedly:
1. Press the REPEAT button.
Each time you press the REPEAT button, the
repeat mode will change as follows:
MP3/WMA: OFF ➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
CDDA: OFF ➝ TRACK ➝ ALL ➝ RANDOM
2. When
you want to stop the Repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR: Repeatedly plays all tracks in the selected folder.
• ALL: Repeatedly plays the entire disc.
• RANDOM: Plays tracks in random order.
10 Skip Track
Press the +10 button while in playback mode.
This will skip the tracks as many as 10 from the
current track.
If you press the STOP ( @ ) button once again,
you can remove the USB device safely.
Do not connect a USB recharger to the USB port
of this product. You can damage the product.
☛☛
To Select a Track from a USB Device
You can select an MP3 file during play.
1. If you want to move to the previous/next track,
press the [,] buttons briefly.
• The unit moves to the previous/next file within the
directory.
• If you press the [,] buttons more times than the
number of the files in the directory, the unit moves to
the next directory.
To Search a Folder Quickly
1. Press the TUNING/ALBUM , or . button
on the remote control to move to the previous/
next folder.
2. When the search is done, you will see the
previous/next folder name. The first track in the
folder will start playing.
To Use High Speed Search
You can search through the section quickly during play.
1. Press the (,) button.
• Each time you press the button, you will move
backward/forward fast.
The sound will not output in fast playback mode.
☛☛
To Repeat one or all Tracks
1. Press the REPEAT button.
Each time you press the REPEAT button, the
repeat mode will change as follows:
OFF ➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
2. When you want to stop the Repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
10
English
MM-J320-EN-ENG-20161103-cms.indd 10
2016/11/3 9:06:52
Listening to Radio
• DIR: Repeatedly plays all tracks in the selected folder.
• ALL: Repeatedly plays all tracks.
• RANDOM: Plays tracks in random order.
10 Skip Track
Refer to the 10 Skip Track section.
Read through the instructions below before using
a USB device with this unit.
• Some USB devices may not work properly with this
product.
• The maximum current supported by the USB port for an
external device is 500 mA (at 5V DC).
• This product only supports USB devices that are
formatted in the FAT16 and FAT32 file system.
• USB HDD's should be connected to a separate power
source. Otherwise, the HDD's will not work.
• If a USB external storage device is connected to multiple
devices, only the files in the first HDD will be played.
• If a usb external device that has multi partition, only the
first partition which support file system is recognized.
• DRM-applied files are not supported. Digital Right
Management restricts unauthorized access to a DRM file
so that the copyright of the file is protected from piracy.
• Even if the extension of the file is .mp3, the file cannot be
played if it is formatted in MPEG layer 1 or 2.
• Do not use a USB hub. USB hubs are not supported.
• The unit displays only the first 15 characters of an MP3/
WMA file name.
• This device is designed to support removable HDDs with
less than 160GB. Depending on the device, a removable
HDD with 160GB or more may or may not be supported.
• It can take several minutes for the product to recognize
the files on a USB device.
• USB devices (particularly, USB HDDs) may cause a
pause when moving to the next track.
• Some USB devices, digital cameras, USB card readers,
iPods, iPhones, and Smart Phones may not be
supported.
• With USB devices supporting only USB VER. 1.1, the
unit may access files slowly or may not recognize file
properties.
• If no buttons are pressed on the product or remote
control for more than 3 minutes when the product is in
Pause mode, it will be changed to Stop mode.
• If no buttons are pressed on the product or remote
control for more than 25 minutes when the product is in
Stop mode or no USB mode, the power will automatically
turn off.
• A maximum of 999 files can be played per USB device.
To Store the Stations You Want
You can store up to15 FM stations.
1. Select FM by pressing the FUNCTION button.
2. To search for a station, press the STOP on
the product or TUNING MODE button one or
more times until MANUAL is displayed.
3. Select a station by:
• Pressing and holding the TUNING/ALBUM
,, . button on the remote control to
automatically search for active broadcasting
stations.
4. Press the MO/ST button to switch between
stereo and mono.
• In a poor reception area, select MONO for a
clear, interference-free broadcast.
• This applies only when listening to an FM
station.
5. If you do not want to store the radio station
found, go back to Step 3 and search for
another station.
Otherwise:
a. Press the ENTER button.
• FM followed by a flashing number appears
in the display. That number is the current
preset number.
b. Press the ,, . buttons to scroll through
and select a preset number.
• You can select a number from 1 to 15.
c. Press the ¬ button to save the preset.
6. To store additional radio stations, repeat Steps
3 to 5.
Selecting a Stored Station
To listen to a stored station, follow these
steps:
1. Select FM by pressing the FUNCTION button.
2. Press the STOP button on the product until
“PRESET” is displayed.
3. Press TUNING/ALBUM ,, . on the remote
control to select a preset number.
English
MM-J320-EN-ENG-20161103-cms.indd 11
11
2016/11/3 9:06:52
Using Bluetooth
You can use a Bluetooth device to enjoy music
with high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth technology lets Bluetooth-compliant devices
interconnect easily with each other using a short,
wireless connection.
• A Bluetooth device may cause noise or malfunction,
depending on usage, when:
- A part of your body comes into contact with the
receiving/transmitting system of the Bluetooth device
or the product.
- It is subject to electrical variation from obstructions
caused by a wall, corner, or by office partitioning.
- It is exposed to electrical interference from
same frequency-band devices including medical
equipment, Microwave ovens, and wireless LANs.
• Keep the Micro Component System and the Bluetooth device close together when pairing. The
greater the distance between the system and Bluetooth
device, the worse the quality.
• If the distance exceeds the Bluetooth operational range,
the connection is lost.
• In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
• The Micro Component System has an effective
reception range of up to 16.25 feet (5 meters) in all
directions if there are no obstacles. The connection will
be automatically cut off if the Bluetooth device moves
out of this range. Even within range, the sound quality
may be degraded by obstacles such as walls or doors.
• This wireless device may cause electric interference
during its operation.
To connect the Component to a
Bluetooth device
Before you begin, confirm that your Bluetooth device
supports the Bluetooth-compliant stereo headset
function.
1. Press the FUNCTION button to display the
"BT" message.
• You will see WAIT for a short period of time
and then BT READY on the front display of
the Micro Component.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. (Refer to the
Bluetooth device's user's manual.)
• When the product is connected to the
Bluetooth device, it will display Device name
; BT on the front display.
• If the Bluetooth device has failed to pair with
the product , delete the previous “[Samsung]
MICRO xxxxxx ” found by the Bluetooth
device and have it search for the product
again.
5. You can listen to the music playing on the
connected Bluetooth device over the Micro
Component system.
• In Bluetooth mode, some model's Play/
Stop/Next/Back functions are not available.
• The product only supports Middle Quality
SBC data (up to 237kbps@48kHz), and
does not support High Quality SBC data
(328kbps@44.1kHz).
• Only one Bluetooth device can be paired at a
time.
• The AVRCP feature is not supported.
• Connect only to a Bluetooth device that supports
the A2DP (AV) function.
• You cannot connect to a Bluetooth device that
supports only the HF (Hands Free) function.
• You may be required to enter a PIN code
(password) when connecting the Bluetooth
device to the Micro Component. If the PIN code
input window appears, enter <0000>.
• Once you have turned off the Micro Component
and pairing is terminated, pairing will not be
restored automatically. To reconnect, you must
pair the device again.
• The Micro Component System may not search or
connect properly in the following cases:
-- If there is a strong electrical field around the
Micro Component.
-- If the Bluetooth device is turned off, not in
place, or malfunctions.
• Note that such devices as Microwave ovens,
wireless LAN adaptors, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, which can cause electric
interference.
3. Select the Stereo headset menu on the
Bluetooth device.
• You will see a list of scanned devices.
4. Select "[Samsung] MICROxxxxxx " from the
searched list.
12
English
MM-J320-EN-ENG-20161103-cms.indd 12
2016/11/3 9:06:52
To disconnect the Bluetooth device from
the Micro Component
Using Bluetooth Power On
You can disconnect the Bluetooth device from
the Micro Component. For instructions, see
the Bluetooth device's user manual.
When the product is turned off, you can
connect your smart device to the product via
a Bluetooth connection to turn it on.
• The Micro Component will be disconnected.
• When the Micro Component is disconnected
from the Bluetooth device, the Micro Component
will display BT DISCONNECTED ; BT READY
on the its display.
To disconnect the Micro Component
from the Bluetooth device
Press another mode button on the front
panel of the Micro Component to switch
from Bluetooth mode to another mode or
turn off the Micro Component. The currently
connected device is disconnected.
• The connected Bluetooth device will wait a certain
amount of time for a response from the Micro
Component before terminating the connection.
(Disconnection time may differ, depending on the
Bluetooth device)
• In Bluetooth connection mode, the Bluetooth
connection may be lost if the distance between the
Micro Component and the Bluetooth device exceeds
the effective reception range.
• If the Bluetooth device comes back into the effective
range after disconnecting, you can restart the Micro
Component to restore the pairing with the Bluetooth
device.
• The Micro Component automatically turns off after
25 minutes in the BT Ready mode.
• When a Bluetooth device is connected to the
Micro Component System, the Component system
automatically switches to the Bluetooth mode if it
is in a different mode (except when it is displaying
"REQUEST" in the TV SoundConnect mode if the
Bluetooth device haven't been paired with the Micro
Component before.).
1. Press and hold the FUNCTION button to set
the Bluetooth Power On function on. ONBLUETOOTH POWER appears on the display.
2. When the product is off, connect your smart
device to the product via Bluetooth. (For
information on Bluetooth connections, refer to
your smart device’s manual.)
• The Bluetooth device must have been paired
with the Micro Component before.
3. When the connection is complete, the product
turns itself on automatically in Bluetooth mode.
• Select the desired music to play from your
smart device.
• Press and hold the FUNCTION button to turn
the Bluetooth Power On function on or off. Each
time you press and hold this button, the Micro
Component displays ON-BLUETOOTH POWER
; OFF-BLUETOOTH POWER on its display.
English
MM-J320-EN-ENG-20161103-cms.indd 13
13
2016/11/3 9:06:52
TV SoundConnect
You can listen to the sound from your
SoundConnect Compatible Samsung TV
through the Micro Component by using the TV
SoundConnect function.
Connecting the Micro Component to a
SoundConnect Compatible Samsung TV
Before activating this function, be sure to activate
the Samsung TV's SoundConnect or SoundShare
mode.
1. Press the FUNCTION button on the main unit
or the
button on the remote control to
display the TV SOUNDCONNECT message.
WAIT ; SEARCH ; REQUEST
2. Set Add New Device to On in the TV's
SoundConnect Settings menu. (Refer to the
TV's user manual for details.)
3. When the Micro Component is connected to
the TV, it will display [TV] Name ; TV on the
front display.
4. The audio from the connected TV plays over the
Micro Component System.
• In TV SoundConnect mode, the Play/
Repeat/Stop/Next/Back functions are not
available.
• The SoundConnect feature is available on
some Samsung TVs released since 2012.
Check whether your TV supports the
SoundShare or SoundConnect function.
(For further details, refer to the TV's user's
manual.)
• If you unplug the Micro Component, the TV
SoundConnect connection is terminated. To
re-establish the connection, plug the Micro
Component into an outlet, and then set the
TV SoundConnect connection again.
• Only one Micro Component at a time can be
connected to a TV via TV SoundConnect.
• To connect to another TV in TV
Soundconnect mode, press the p button
for more than 5 seconds, and then connect
to the other TV by following the directions
above.
To disconnect the TV from the Micro
Component
You can disconnect the TV from the Micro
Component.
For instructions, see the TV's user manual.
14
• When the Micro Component is disconnected
from the TV, the Micro Component will display TV
DISCONNECTED ; REQUEST on its display.
To disconnect the Micro Component from the
TV
Press another mode button on the front panel
of the Micro Component to switch from TV
SoundConnect mode to another mode or turn off
the Micro Component. The currently connected
device is disconnected.
• The connected TV will wait a certain amount of
time for a response from the Micro Component
before terminating the connection.(Disconnection
time may differ, depending on the TV)
• The connection may be lost or sound may stutter
if the distance between the TV and the Micro
Component exceeds 6.5 feet (2 m).
• Instability in the network environment may cause
the connection to be lost or sound to stutter.
• In TV SoundConnect mode, the Micro
Component automatically turns off after 25
minutes if it is not connected to a TV.
Setting the Clock
During each step, you have a few seconds to set
the required options. If you exceed this time, you
must start again.
1. Switch the system on by pressing the POWER
( ) button.
2. Press the TIMER CLOCK button and then
press the ENTER (
) button, "CLOCK" is
displayed.
3. Press the ENTER (
) button. The hour
flashes.
• To increase the hours, press: ,
• To decrease the hours, press: .
4. When the correct hour is displayed, press the
ENTER (
) button. The minutes flash.
• To increase the minutes, press: ,
• To decrease the minutes, press: .
5. When the correct minute is displayed, press the
ENTER (
) button. " TIME" appears in the
display.
• The current time is now set.
• You can display the time, even when you are
using another function, by pressing the
TIMER CLOCK button once.
English
MM-J320-EN-ENG-20161103-cms.indd 14
2016/11/3 9:06:53
Timer Function
The timer enables you to switch the system on or
off at specific times automatically.
• Before setting the timer, confirm that the current
time is correct.
• During each step, you have a few seconds to set
the required options. If you exceed this time, you
must start again.
• If you no longer want the system to be switched on
or off automatically, cancel the timer by pressing the
TIMER ON/OFF button.
Example: You want to wake up to music every morning.
1. Switch the system on by pressing the
POWER ( )button.
2. Press the TIMER CLOCK button until
displayed.
TIME is
3. P
ress the ENTER (
) button.
Result: O
N is displayed for a few seconds. You
can set the timer switch-on time.
4. Set the timer switch-on time.
a. Press the , or . button to set the hours.
b. Press the ENTER (
) button.
Result: The minutes flash.
c. Press the , or . button to set the minutes.
d. Press the ENTER (
) button.
Result: O
FF is displayed for a few seconds.
You can now set the timer switch-off
time.
5. Set the timer switch-off time.
a. Press the , or . button to set the hours.
b. Press the ENTER (
) button.
Result: The minutes flash.
c. Press the , or . button to set the minutes.
d. Press the ENTER (
) button.
Result: V
OL XX is displayed, where XX corresponds to the volume already set.
6. P
ress the , or . button to adjust the volume
level, and then press the ENTER (
)button.
Result: The source to be selected is displayed.
7. P
ress the , or . button to select the desired
source to be played when the system switches
on.
If you select...
You must also...
FM (radio)
P
a
ress the ENTER (
) button.
b Select a preset station by pressing
the , or . button.
CD/MP3 (compact disc) Load one compact disc.
USB
Connect the USB device.
8. Press the ENTER (
) button.
Result: CHKREC (Do you want to record?) is displayed.
9. Press the ENTER (
) button.
Result: REC N is displayed. You can press the
, or . button to select REC Y or REC N, and
then press ENTER (
) button.
1).If you select REC N, the Micro Component
will not record when it turns on. If you have
already set a tuner timer recording, selecting
REC N cancels it. Note that the Micro
Component will still turn on and off at the
times you set earlier in this procedure.
2).If you select the REC Y, you can set the Micro
Component to record when it turns on. The
recording switch on and switch off times can
be different from the timer switch on and off
times you set earlier in this procedure.
a. Press the ENTER (
) button.
Result: ON is displayed for a few seconds.
You can set the tuner timer recording
switch-on time.
b. Press the ENTER (
) button.
Result: OFF is displayed for a few
seconds. You can set the tuner timer
recording switch-off time.
• The maximum tuner timer recording time is 5
hours.
• If the timer switch on and off times are identical,
the word ERROR is displayed.
• When there is no disc in or USB connected to
the Micro Component, if you select "MP3/CD"
or "USB", the Micro Component automatically
selects "FM".
• If the switch-on or -off time is the same as the
timer recording time, only the switch-on or -off
time is effective, and the timer recording time is
not applied.
• If the auto timer is turned on, the MP3/CD or
USB function may require an additional step to
be activated depending on the disc (or device).
It is better for you to select the tuner function
instead.
Cancelling the Timer
After you have set the timer, the unit will start
automatically at the time shown by the TIMER
indication on the display. If you no longer want
to use the timer, you must cancel it.
1. To cancel the timer, press TIMER ON/OFF once,
is no longer displayed.
2. To resume the timer, press TIMER ON/OFF
again. is displayed again.
• When you select the TIMER OFF mode, the
TIMER RECORDING and TIMER function are
not available.
English
MM-J320-EN-ENG-20161103-cms.indd 15
15
2016/11/3 9:06:53
Recording Function
You can record from a CD, radio broadcast, or an
external source to a USB storage device.
1. Connect an external USB storage device to the
USB jack on your product.
2. P
lay a disc, tune to a station, or connect an
external source to your product.
CD
• Press the
button on the main unit or press
the FUNCTION button on the remote control to
select the MP3/CD function.
• Press the OPEN/CLOSE button to open the
disc tray.
• Insert a CD and press the OPEN/CLOSE
button to close the disc tray.
• Use the CD selection buttons ( [ or ] ) to
select the desired song.
Tuner
• Press the
button on the main unit or press
the FUNCTION button on the remote control to
select the FM function.
• Tune to a station you want to record.
External Source
• Connect an External Component/MP3 player to
your product.
• Press the
button on the main unit or press
the FUNCTION button on the remote control to
select the <AUX> input.
• Play a song from the external device.
3. Press the USB REC button to start recording.
CD
• “TRACK RECORDING” is displayed and CD
recording starts.
• Press and hold the USB REC button to start
recording all tracks on the disc. "FULL CD
RECORDING" is displayed.
MP3/WMA-CD
4. To stop recording, press the STOP (@) button.
The product automatically creates and saves
recorded files in .MP3 format (SAM-XXXX.MP3).
5. To remove the USB device safely, press the STOP
(@) button once again. After recording, a directory
named “RECORDING(DISCxxxx)”(FULL CD
RECORDING), “RECORDING”(TRACK
RECORDING), “CD COPY”(MP3/WMA-CD),
“TUNER RECORDING” or “AUX RECORDING”
is created on your USB device.
• Do not disconnect the USB or the AC Cord during
recording as this may cause damage to the file.
• If you disconnect the USB device during a recording,
the unfinished recording file may get damaged and
cannot be deleted. If this occurs, please connect the
USB device to a PC, back up the data stored in the
USB, and then format it.
• When the USB memory has insufficient free space,
the system will display “NOT ENOUGH MEMORY”.
• The USB device or HDD you are recording to must
be formatted in the FAT file system. The NTFS file
system is not supported.
• When you use the CD high speed search function,
CD recording is not available.
• Sometimes, the recording time may be longer with
some USB devices.
• The REPEAT function is set to "OFF" automatically
and is not available during a recording.
• You cannot record the radio when searching or when
no available station is found in the Tuner mode.
• Note that setting the input level too loud when
recording music from an external device through
the AUX or USB channel may cause noise in the
recording. If this occurs, lower the external device’s
volume level.
• The maximum TUNER/AUX recording time is 5
hours.
• Press the USB REC button. The currently
playing file is copied onto the USB device.
• Press and hold the USB REC button. All the
files in the current folder are copied onto the
USB device.
COPY: “CHECK”“START”“COPY XX”“COPY END”
is displayed. When the recording is done,
“STOP” will be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• Tuner: "TUNER RECORDING""RECORD"
• External Source : "AUX
RECORDING""RECORD"
16
English
MM-J320-EN-ENG-20161103-cms.indd 16
2016/11/3 9:06:53
Selecting EQ Mode
Your Micro Component System provides predefined equalizer settings that are optimized for
particular music genre.
1. Press the EQ button.
Each time you press the EQ button repeatedly,
the mode will change as follows:
OFF;FLAT;RANCHERA;CUMBIA;REGGAE
;MERENGUE;SALSA;REGGATON
;FOLKLORE;PARTY;POP;HIP HOP
;ROCK;JAZZ;CLASSICAL;ELECTRONIC;P
OWER BASS
• The EQ button will be disabled during the recording,
and the product switches to “ OFF” automatically.
• The equalizer mode may be different depending
on your region.
Software Update
Samsung may offer updates for the Product's system
firmware in the future.
If an update is offered, you can update the firmware
by connecting a USB device with the firmware update
stored on it to the USB port on your product.
Note that if there are multiple update files, you must
load them onto the USB device singly and use them
to update the firmware one file at a time.
Please visit samsung.com or contact the Samsung
Call Center to receive more information about downloading updates files.
• Select USB function, insert a USB device containing
the firmware update into the USB port on the main
unit.
• Updating firmware may not work properly if audio
files supported by the product are stored in the USB
storage device.
• Do not disconnect the power or remove the USB
device while updates are being applied. The main
unit will turn off automatically after completing the
firmware update.
• After the update, all settings are reset to their factory
default settings. We recommend you write down
your settings so that you can easily reset them after
the update.
If the firmware fails to update, we recommend
formatting the USB device in FAT16/FAT32 and
trying again.
• Once the software update is completed, turn on
the product with no disc inserted. The “NO DISC”
message appears on the display. Press and hold
the STOP button on the main unit for longer than 5
seconds. “INIT ” appears on the display and the unit
powers off. The upgrade is complete.
• Do not format the USB device in the NTFS format.
The product does not support the NTFS file system.
• Depending on the manufacturer, some USB devices
may not be supported.
• The product has a DUAL BOOT function. If the
firmware fails to update, most functions will become
inoperable and "UPGRADE FIRMWARE" will appear
on the display. Update the firmware again.
English
MM-J320-EN-ENG-20161103-cms.indd 17
17
2016/11/3 9:06:54
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are
experiencing is not listed below or if the instructions below do not help, turn off the unit,
disconnect the power cord, and contact the nearest authorized dealer or Samsung
Electronics Service Center.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
No sound.
• The unit does not produce sound during fast playback and slow
playback.
• Are the speakers connected properly?
• Is the disc severely damaged?
The remote control does not
work.
• Is the remote control being operated within its operational angle and
distance range?
• Are the batteries drained?
• The product is not working.
•Reset the unit: With no disc inserted and the “NO DISC” message on
(Example: The power goes out or the display of the product, press and hold the STOP (@) button on the
the front panel key doesn't work
main unit for longer than 5 seconds. or you hear a strange noise.)
Using the RESET function will erase all stored settings.
• The product is not working
Do not use this unless necessary.
normally.
Can't receive radio broadcasts.
18
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an
area with good reception.
English
MM-J320-EN-ENG-20161103-cms.indd 18
2016/11/3 9:06:54
Specifications
General
FM Tuner
CD Disc
Main unit (MM-J320)
Main unit (MM-J330)
Weight
Speaker (MM-J320)
Speaker (MM-J330)
Main unit
Dimensions
Speaker (MM-J320)
Speaker (MM-J330)
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
CD : 12 cm (COMPACT DISC)
1.23 Kg
1.31 Kg
1.12 Kg
2.07 Kg
200.3 (W) x 114.0 (H) x 200.3 (D) mm
132.0 (W) x 213.0 (H) x 140.5(D) mm
142.5 (W) x 260.0 (H) x 180.5(D) mm
+5°C~+35°C
10 % to 75 %
50 dB
12 dB
0.6 %
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
MM-J320- 20 Watts (MAX)
Speaker output
10 W/CH (8 Ω/100 Hz)
MM-J330- 70 Watts (MAX)
Amplifier
Speaker output
35 W/CH (8 Ω / 100 Hz)
Frequency range
20 Hz~20 KHz
S/N Ratio
60 dB
Channel separation
50 dB
Input sensitivity
(AUX) 1.2 V
Overall Standby Power Consumption(W)
(All the network ports are “ON” condition)
4.0W
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For information on the power supply and power consumption, refer to the label attached to the product.
Open Source Announcement
To send inquiries and requests regarding open sources, contact Samsung via Email (oss.request@samsung.com).
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
English
MM-J320-EN-ENG-20161103-cms.indd 19
19
2016/11/3 9:06:54
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the
SAMSUNG customer care Centre.
Area
` Europe
Contact Centre 
AUSTRIA
0800 - SAMSUNG (0800 7267864)
BELGIUM
02-201-24-18
BOSNIA
BULGARIA
CROATIA
CZECH
DENMARK
FINLAND
FRANCE
051 331 999
07001 33 11 , sharing cost
062 726 786
800 - SAMSUNG (800-726786)
70 70 19 70
030-6227 515
01 48 63 00 00
0180 6 SAMSUNG bzw.
0180 6 7267864*
(*0,20 €/Anruf aus dem dt.
Festnetz, aus dem Mobilfunk
max. 0,60 €/Anruf)
8009 4000 only from landline, toll
free
80111-SAMSUNG (80111 726
7864) only from land line
(+30) 210 6897691 from mobile
and land line
0680SAMSUNG (0680-726-786)
0680PREMIUM (0680-773-648)
800-SAMSUNG (800.7267864)
GERMANY
CYPRUS
GREECE
HUNGARY
ITALIA
Web Site
www.samsung.com/at/support
www.samsung.com/be/support
(Dutch)
www.samsung.com/be_fr/
support (French)
www.samsung.com/support
www.samsung.com/bg/support
www.samsung.com/hr/support
www.samsung.com/cz/support
www.samsung.com/dk/support
www.samsung.com/fi/support
www.samsung.com/fr/support
www.samsung.com/de/support
www.samsung.com/gr/support
http://www.samsung.com/hu/
support
www.samsung.com/it/support
[Correct disposal of batteries in this product]
Area
Contact Centre 
LUXEMBURG 261 03 710
MONTENEGRO 020 405 888
080 697 267
SLOVENIA
090 726 786
0900-SAMSUNG (0900-7267864)
NETHERLANDS
(€ 0,10/Min)
NORWAY
815 56480
0 801-172-678* lub +48 22
607-93-33 **
* (całkowity koszt połączenia jak za
POLAND
1 impuls według taryfy operatora
** (koszt połączenia według taryfy
operatora)
PORTUGAL
808 20 7267
08008 SAMSUNG (08008 726
ROMANIA
7864) TOLL FREE No.
SERBIA
011 321 6899
SLOVAKIA
0800 - SAMSUNG(0800-726 786)
SPAIN
0034902172678
SWEDEN
0771 726 7864 (SAMSUNG)
Web Site
www.samsung.com/support
www.samsung.com/support
www.samsung.com/si/support
www.samsung.com/nl/support
www.samsung.com/no/support
www.samsung.com/pl/support
www.samsung.com/pt/support
www.samsung.com/ro/support
www.samsung.com/rs/support
www.samsung.com/sk/support
www.samsung.com/es/support
www.samsung.com/se/support
www.samsung.com/ch/support
(German)
SWITZERLAND 0848 726 78 64 (0848-SAMSUNG)
www.samsung.com/ch_fr/
support (French)
U.K
0330 SAMSUNG (7267864)
www.samsung.com/uk/support
EIRE
0818 717100
www.samsung.com/ie/support
LITHUANIA
8-800-77777
www.samsung.com/lt/support
LATVIA
8000-7267
www.samsung.com/lv/support
ESTONIA
800-7267
www.samsung.com/ee/support
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the
batteries in this product should not be disposed of with other household
waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury,
cadmium or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause
harm to human health or the environment.
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate these items
from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through
your local, free battery return system.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and
how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for
disposal.
MM-J320-EN-ENG-20161103-cms.indd 20
2016/11/3 9:06:54
Download PDF