Samsung | MM-D330D | Samsung MM-D330D Benutzerhandbuch

MM-D330D
DVD MICRO COMPONENT SYSTEM
user manual
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
MM-D330D-ENG-0207.indd
Sec1:1
2011-3-16
18:07:07
Safety Information
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
CAUTION : TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
This symbol indicates important
instructions accompanying the product.
WARNING
• To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION
• Apparatus shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall be placed on
the apparatus.
• The Mains plug is used as a disconnect device and shall stay
readily operable at any time.
• This apparatus shall always be connected to a AC outlet with
a protective grounding connection.
• To disconnect the apparatus from the mains, the plug must be
pulled out from the mains socket, therefore the mains plug
shall be readily operable.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
CAUTION
• INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE
The main lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin
face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same
colour as the fuse fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should
obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug
to a main socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a main socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the main lead are coloured in accordance with the following code:– BLUE = NEUTRAL
BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed
as follows:–
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE
or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED.
WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND
YELLOW.
2
MM-D330D-ENG-0207.indd
English
2
2011-3-16
18:07:34
Safety Information
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and
picture quality or cause skipping.
Be especially careful not to scratch discs when
handling them.
Holding discs
• Do not touch the playback side of the disc.
• Hold the disc by the edges so that fingerprints will not get
on the surface.
• Do not stick paper or tape on the disc.
License
• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc.
This is an official DivX Certified device that plays DivX video. Visit www.
divx.com for more information and software tools to convert your files
into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play DivX Video-on-Demand (VOD)
content. To generate the registration code, locate the DivX VOD section in
the device setup menu. Go to vod.divx.com with this code to complete
the registration process and learn more about DivX VOD.
• “Pat. 7,295,673; 7,460,688; 7,519,274”
• DivX Certified® to play DivX ® video.
• DivX ®,DivX Certified® and associated logos are trademarks of
DivX,Inc.and are used under license.
Disc Storage
• Do not keep in direct sunlight
• Keep in a cool ventilated area
• Keep in a clean Protection jacket.
Store vertically.
Copyright
© 2011 Samsung Electronics Co., Ltd. All rights
reserved.
✎ NOTE


Copy Protection
Do not allow the discs to become contaminated with dirt.
Do not load cracked or scratched discs.
Handling and Storing Discs
If you get fingerprints or dirt on the disc, clean it with a
mild detergent diluted in water and wipe with a soft cloth.
• When cleaning, wipe gently from the inside to the
outside of the disc
✎ NOTE

• Many DVD discs are encoded with copy protection. Because of this,
you should only connect your product directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted picture from
copy-protected DVD discs.
• This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights. Use
of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Condensation may form if warm air comes into contact
with cold parts inside the product. When condensation
forms inside the product, it may not operate correctly. If
this occurs, remove the disc and let the product stand
for 1 or 2 hours with the power on.
Accessories
Check for the supplied accessories below.
Video Cable
FM Antenna
User's Manual
Remote Control/Batteries(AAA
size)(optional)
English
MM-D330D-ENG-0207.indd
3
3
2011-3-16
18:07:35
Contents
2
3
3
3
3
3
Safety Warnings
Accessories
Cautions on Handling and Storing Discs
License
Copyright
Copy Protection
GETTING STARTED
5
5
6
9
9
9
10
11
Precautions
Icons that will be used in manual
Disc Types and Characteristics
Description
Front Panel
Top Panel
Rear Panel
Remote control
CONNECTIONS
12
13
14
15
15
Connecting the Speakers
Connecting the Video Out to your TV
Connecting External Components
Connecting the FM Antenna
Connecting Headphones
SETUP
16
16
17
17
17
17
17
18
18
18
18
18
18
18
18
18
Before Starting (Initial Setting)
Setting the Setup menu
Display
TV Aspect
Audio
DRC (Dynamic Range Compression)
AUDIO-SYNC
System
Initial Setting
DivX(R) Registration
Language
Security
Parental Rating
Change Password
Support
Product Information
BASIC FUNCTIONS
19
19
20
20
25
26
26
27
27
29
29
30
Disc Playback
Audio CD(CD-DA)/MP3/WMA Playback
JPEG File Playback
Using the Playback Function
Sound Mode
Mute Function
Display Function
Listening to Radio
About RDS Broadcasting(optional)
Setting the Clock
Timer Function
Sleep Timer Function
SAFETY INFORMATION
2
5
12
16
19
4
MM-D330D-ENG-0207.indd
English
4
2011-3-16
18:07:38
USB Function
Recording Function
OTHER INFORMATION
33
34
35
Troubleshooting
Language code list
Specifications
31
33
Getting Started
31
31
01
ADVANCED FUNCTIONS
Getting Started
Precautions
Icons that will be used in manual
Make sure to check the following terms before
reading the user manual.
Icon
Term
Definition
d
DVD
This involves a function available
with DVD-Video or DVD±R/±RW
discs that have been recorded
and finalised in Video Mode.
B
CD
This involves a function available
with a data CD (CD-DA,
CD-R/-RW).
A
MP3
This involves a function available
with CD-R/-RW discs.
G
JPEG
This involves a function
available with CD-R/-RW
discs.
D
DivX
This involves a function
available with MPEG4 discs.
(DVD±R/±RW, CD-R/-RW)
!
CAUTION
✎
NOTE
ENGLISH
• Ensure that the AC power supply in your house complies with
the identification sticker located on the back of your product.
• Install your product horizontally, on a suitable base (furniture),
with enough space around it for ventilation (7.5~10cm).
• Do not place the product on amplifiers or other equipment
which may become hot. Make sure the ventilation slots are not
covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc Insert Hole is
empty.
• In order to disconnect the product completely from the
power supply, remove the AC plug from the wall outlet,
especially when left unused for a long period of time.
• During thunderstorms, disconnect the AC plug from the
wall outlet. Voltage peaks due to lightning could damage
the product.
• Do not expose the product to direct sunlight or other heat
sources. This could lead to overheating and malfunction
of the product.
• Protect the product from moisture, and excess heat or
equipment creating strong magnetic or electric fields (i.e.
speakers.).
• Disconnect the power cable from the AC supply if the
product malfunctions. Your product is not intended for
industrial use.
• Use of this product is for personal use only.
• Condensation may occur if your product or disc has been
stored in cold temperatures. If transporting the product
during the winter, wait approximately 2 hours until the
product has reached room temperature before using.
• The batteries used with this product contain chemicals
that are harmful to the environment. Do not dispose of
batteries in the general household trash.
This involves a case where a
function does not operate or
settings may be canceled.
This involves tips or instructions
on the page that help each
function operate.
• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
• An administration fee may be charged if either
a. an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)
b. you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
• The amount of such administration charge will be advised to you before any work or home visit is carried out.
English
MM-D330D-ENG-0207.indd
5
5
2011-3-16
18:07:39
Getting Started
Disc Types and Characteristics
Disc types that can be played
Disc Types &
Mark (Logo)
Region Code
Recorded
Signals
The product and the discs are coded by region. These
regional codes must match in order for the disc to play. If the
codes do not match, the disc will not play.
Disc Type
DVD-VIDEO
Region
Code
12 cm
Area
1
2
The U.S., U.S. territories and
Canada
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America, Central
America, Australia, New Zealand,
Pacific Islands, Caribbean
5
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
6
China
Disc
Size
VIDEO
Approx. 240 min.
(single-sided)
Approx. 480 min.
(double-sided)
Approx. 80 min.
(single-sided)
DVD-VIDEO
8 cm
Europe, Japan, the Middle East,
Egypt, South Africa, Greenland
Max. Playing Time
Approx. 160 min.
(double-sided)
12 cm
74 min.
8 cm
20 min.
12 cm
-
8 cm
-
AUDIO
AUDIO-CD
AUDIO
+
DivX
VIDEO
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM, DVD-ROM and
DVD-RAM discs cannot be played on this product.
If such discs are played, a <WRONG DISC
FORMAT> message appears on the TV screen.
• DVD discs purchased abroad may not play on this
product.
If such discs are played, a <Wrong Region. Please
check Disc.> message appears on the TV screen.
Disc Types And Disc Format
This product does not support Secure (DRM) Media files.
CD-R Discs
• Some CD-R discs may not be playable depending on
the disc recording device (CD-Recorder or PC) and the
condition of the disc.
• Use a 650MB/74 minute CD-R disc.
Do not use CD-R discs over 700MB/80 minutes as
they may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully
played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
6
MM-D330D-ENG-0207.indd
English
6
2011-3-16
18:07:40
01
• Only CD-R discs with MP3 files in ISO 9660 or
Joliet format can be played.
• MP3 file names should contain no blank spaces
or special characters (. / = +).
• Use discs recorded with a compression/
decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions
can be played.
• Only a consecutively written multisession disc can
be played. If there is a blank segment in the
Multisession disc, the disc can be played only up
to the blank segment.
• If the disc is not closed, it will take longer to begin
playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR)
format, i.e. files encoded in both low bit rate and
high bit rate (e.g., 32Kbps ~ 320Kbps), the
sound may skip during playback.
• A maximum of 999 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
• Only files with the "jpg" extensions can be played.
• If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet
format can be played.
• JPEG file names should be 8 characters or less in
length and contain no blank spaces or special
characters (. / = +).
• Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
• A maximum of 999 images can be stored on a folder.
• When playing a Kodak/Fuji Picture CD, only the JPEG
files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may
take longer to start playing or may not play at all.
DVD±R/±RW, CD-R/RW Discs
Getting Started
CD-R MP3 Discs
• If a DVD-R/-RW disc has not been recorded
properly in DVD Video format, it will not be
playable.
DivX (Digital internet video express)
DivX is a video file format developed by Microsoft and is
based on MPEG4 compression technology to provide
audio and video data over the Internet in real-time.
MPEG4 is used for video encoding and MP3 for audio
encoding so that the users can watch a movie at near
DVD-quality video and audio.
Supported Formats (DivX)
This product only supports the following media formats.
If both video and audio formats are not supported, the
user may experience problems such as broken images
or no sound.
Supported Video Formats
Format
AVI
WMV
Supported Versions
DivX3.11~DivX5.1
V1/V2/V3/V7
Supported Audio Formats
Format
Bit Rate
MP3
80~320kbps
WMA
56~128kbps
AC3
128~384kbps
Sampling
Frequency
44.1khz
44.1/48khz
• Aspect Ratio : Although the default DivX resolution is
640x480 pixels, this product supports up to
720x480 pixels. TV screen resolutions higher than
800 will not be supported.
• When you play a disc whose sampling frequency is
higher than 48khz or 320kbps, you may experience
shaking on the screen during playback.
• Sections with a high frame rate might not be played
while playing a DivX file.
• Since this product only provides encoding formats
authorized by DivX Networks, Inc., a DivX file
created by the user might not play.
• Software updates for incompatible formats are not
supported.
(Example : QPEL, GMC, resolution higher than
800 x 600 pixels, etc.)
English
MM-D330D-ENG-0207.indd
7
7
2011-3-16
18:07:41
Getting Started
USB Host Specification
USB Host Specification
• Supports USB 1.1 or USB 2.0 compliant devices.
• Supports devices connected using the USB A type
cable.
• Supports UMS (USB Mass Storage Device) V1.0
compliant devices.
• Supports the device of which the connected drive is
formatted in the FAT (FAT, FAT16, FAT32) file system.
Non-compliance
• Does not support a device that requires installing a
separate driver on the PC (Windows).
• Does not support connection to a USB hub.
• A USB device that is connected using the USB
extension cable may not be recognized.
• A USB device requiring a separate power source
needs to be connected to the product with the
separate power connection.
Operational Limitations
• If the connected device has multiple drives (or
partitions) installed, only one drive (or partition) can be
connected.
• A device supporting USB 1.1 alone may cause a
difference in the picture quality, depending on the
device.
USB Devices that can be used with the
product
- If you install multiple memory devices into a multi
card reader, you may experience problems.
Supported file Formats
Format
Still
Picture
File name
JPG
File
extension
JPG
.JPEG
–
Bit rate
Music
MP3
Movie
WMA
WMV
DivX
.MP3
.WMA
.WMV
.AVI
80~320
kbps
56~128
kbps
4Mbps
4Mbps
V1,V2,
V3,V7
DivX3.11~
DivX5.1,
XviD
Version
–
Pixel
640x480
–
–
720x480
Sampling
Frequency
–
44.1kHz
44.1kHz
44.1KHz~ 48KHz
–
V8
• CBI (Control/Bulk/Interrupt) is not supported.
• Digital Cameras that use PTP protocol or require
additional program installation when connected to a
PC are not supported.
• Some MP3 players, when connected to this product,
may not operate depending on the sector size of their
file system.
• The USB host function is not supported if a product
that transfers media files by its manufacturer specific
program is connected.
• Does not operate with Janus enabled MTP (Media
Transfer Protocol) devices.
• The USB host function of this product does not
support all USB devices.
• USB Storage Device, MP3 Player, Digital Camera
• Removable HDD
- Removable HDDs equipped with less than 160
Gbytes are supported. Removable HDDs
equipped with 160Gbytes or more may not be
recognized, depending on the device.
- If the connected device does not work due to
insufficient power supply, you can use a
separate power cable to supply power so that it
can work properly. The connector of the USB
cable may differ, depending on the manufacturer
of the USB device.
• USB card Reader: One slot USB card reader and
Multi slot USB card reader.
- The USB card reader may not be supported,
depending on the manufacturer.
8
MM-D330D-ENG-0207.indd
English
8
2011-3-16
18:07:42
01
Description
Getting Started
Front Panel
6
1
5V
500mA
AUX IN
2
1.
2.
3.
4.
5.
6.
3
PHONES
4 5
WINDOW DISPLAY
COMPACT DISC COMPARTMENT
USB JACK
AUX IN JACK
PHONES JACK
VOLUME CONTROL BUTTON
Top Panel
1.
2.
3.
4.
5.
6.
7.
8.
POWER BUTTON
USE REC BUTTON
FUNCTION BUTTON
SKIP/SEARCH FUNCTION BUTTON
TUNING MODE OR STOP BUTTON
PLAY/PAUSE BUTTON
SKIP/SEARCH FUNCTION BUTTON
OPEN/CLOSE BUTTON
USB REC
1 2 3 4 5 6 7 8
English
MM-D330D-ENG-0207.indd
9
9
2011-3-16
18:07:43
Getting Started
Rear Panel
PB
Y
COMPONENT
OUT
5
ONLY FOR
SERVICE
PR
SPEAKERS
OUT 8
1
VIDEO OUT
2
3
4
1
2.0 CHANNEL SPEAKER OUTPUT
CONNECTORS
Connect the front speakers.
2
ONLY FOR SERVICE
This jack is just for testing,please don't use it.
3
FM ANTENNA JACK
Connect the FM antenna.
4
VIDEO OUT JACK
Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
5
COMPONENT VIDEO OUTPUT JACKS
Connect a TV with Component video inputs to these jacks.
Where to Install Your Micro-Compact System
To take full advantage of your new Micro-compact system, follow these installation instructions before connecting the unit.








Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never place this unit in an outdoor area.
Maintain an open space of approximately 6 inches (15 cm) on the sides and rear of the system, for ventilation purposes.
Make sure that you have enough room to open the compact disc compartment easily.
Place the Speakers at a reasonable distance on either side of the system to ensure good stereo sound.
Direct the Speakers towards the listening area.
For optimum performance, make sure that both speakers are placed at an equal distance above the floor.
10
MM-D330D-ENG-0207.indd
10
English
2011-3-16
18:07:46
01
Getting Started
Remote control
Tour of the Remote Control
FUNCTION button
POWER button
MO/ST, B button
DISPLAY, A button
TIMER/CLOCK button
TIMER ON/OFF button
TITLE MENU button
DISC MENU button
REPEAT button
DVD* button
SOUND, C button
EQ, D button
SLEEP button
Number(0~9) button
SYNC *button
CD REC SPEED button
VOL + button
PAUSE button
SKIP, RDS DISPLAY* button
PLAY button
SEARCH button
button
TUNING
RETURN button
VOL - button
USB REC button
SKIP, RDS PTY* button
STOP button
SEARCH button
MENU button
CURSOR/ENTER button
TOOLS button
EXIT button
TUNING
button
MUTE button
INFO button
* This product does not support the DISC SKIP/SYNC function with marked [ *].
* This product may not have the RDS function depending on your region.
Installing batteries in the Remote Control
✎ NOTE




* Battery size: AAA
Place batteries in the remote control so they match the
polarity : (+) to (+) and (–) to (–).
Always replace both batteries at the same time.
Do not expose the batteries to heat or a flame.
The remote control can be used up to approximately 23
feet (7 meters) in a straight line.
English
MM-D330D-ENG-0207.indd
11
11
2011-3-16
18:07:48
Connections
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
PB
Y
COMPONENT
OUT
ONLY FOR
SERVICE
SPEAKERS
OUT 8
PR
VIDEO OUT
Position of the product
Place it on a stand or cabinet shelf, or under the TV stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Example : For 32" TV's 6.56 ~ 7.87 feet (2~2.4 m)
For 55" TV's 11.5 ~ 13.1 feet (3.5~4 m)
Front Speakers
ei
Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at the same height as your ear.
! CAUTION


Do not let children play with or near the speakers. They could get hurt if the speaker falls.
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
✎ NOTE

If you place a speaker near your TV set, screen color may be distorted because of the magnetic field
generated by the speaker. If this occurs, place the speaker away from your TV set.
12
MM-D330D-ENG-0207.indd
12
English
2011-3-16
18:07:50
02
Connections
Connections
Connecting the Video Out to your TV
Choose one method for connecting to a TV.
PB
Y
COMPONENT
OUT
ONLY FOR
SERVICE
PR
SPEAKERS
OUT 8
VIDEO OUT
METHOD 1( not supplied)
METHOD 2(supplied)
TV
VIDEO INPUT
COMPONENT IN
METHOD 1 : Component Video(BETTER QUALITY)
If your television is equipped with Component Video inputs, connect a Component video cable (not supplied)
from the COMPONENT OUT (Pr, Pb and Y) Jacks on the back of the product to the Component Video
Input Jacks on your TV.
METHOD 2 : Composite Video(GOOD QUALITY)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack
on your TV.
English
MM-D330D-ENG-0207.indd
13
13
2011-3-16
18:07:52
Connections
Connecting External Components
500mA
AUX IN
PHONES
Connecting an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN (Audio) on the player to the Audio Out of the external analog component.
2. Press the F (
) button to select AUX input.
You can select AUX by pressing the FUNCTION button on the remote control.
14
MM-D330D-ENG-0207.indd
14
English
2011-3-16
18:07:53
02
Connections
Connections
Connecting the FM Antenna
PB
FM Antenna
(supplied)
ONLY FOR
SERVICE
SPEAKERS
OUT 8
Y
COMPONENT
OUT
PR
VIDEO OUT
1. Connect the FM antenna supplied to the FM Antenna jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
✎ NOTE

This product does not receive AM broadcasts.
Connecting Headphones
You can connect a set of headphones to your micro component system so that you can listen to music or
radio programmers without disturbing other people in the room. The headphones must have a 3.5ø jack or
an appropriate adapter.
500mA
AUX IN
PHONES
1. Connect the headphones to the PHONES jack on the front panel.
• The loudspeakers are no longer used to output the sound.
✎ NOTE

Prolonged use of headphones at a high volume may damage your hearing.
English
MM-D330D-ENG-0207.indd
15
15
2011-3-16
18:07:54
Setup
Before Starting (Initial Setting)
1. Press the POWER button when it is plugged in
TV for the first time.
Initial Setting screen will be displayed.
Setting the Setup menu
The access step may differ depending on the selected
menu. The GUI (Graphical User Interface) in this
manual may differ, depending on the firmware version.
Initial setting | On-Screen Language
Select a language for the on-screen displays.
1
2
English
한국어
3
Nederlands
Français
Deutsch
4
Italiano
Move
Select
2. Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
1
MENU BUTTON : Display the home menu.
2
RETURN BUTTON : Return to the previous
setup menu.
3
ENTER / DIRECTION BUTTON
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
4
EXIT BUTTON : Exit the setup menu.
3. Press the ▲▼ buttons to select desired TV Aspect,
then press the ENTER button.
✎ NOTE



If you move to the previous screen, press and hold
Red(A) button.
Once you select a menu language, you can change it by
pressing the STOP () button on the top panel for more
than 5 seconds with no disc.
When the Initial Setting screen does not appear, refer to
Initial Setting. (see page 18)
Settings
Function
DVD/CD
1. Press the POWER button in NO DISC mode,
or
During playback, press STOP button twice.
2. Press the ◄► buttons to select Settings, then
press the ENTER button.
3. Press the ▲▼ buttons to select desired menu,
then press the ENTER button.
4. Press the ▲▼ buttons to select desired
sub-menu, then press the ENTER button.
5. Press the ▲▼ buttons to select desired item,
then press the ENTER button.
6. Press the EXIT button to exit the setup menu.
16
MM-D330D-ENG-0207.indd
16
English
2011-3-16
18:07:56
03
Setup
Display
Audio
You can configure various display optionals such as
the TV Aspect.
DRC (Dynamic Range Compression)
TV Aspect
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
Depending on the type of television you have, you
may want to adjust the screen setting.
Settings
Settings
Display
TV Aspect
Audio
System
Display
DRC
Audio
Audio Sync
: 0 Full
: 506/8
mSec
System
4/8
4:3 Pan-Scan
Language
2/8
4:3 Letter Box
Security
16:9 Wide
Support
Off
Language
Security
Support
Move
Move
Select
Select
Return
Return
• You can select either Full, 6/8, 4/8, 2/8, Off.
AUDIO-SYNC
• 4:3 Pan-Scan
Select when you want to see the 16:9
video supplied by the DVD without the
black bars on top and bottom, even
though you have a TV with a 4:3 ratio
screen(extreme left and right portion of
the movie picture will be cut off).
• 4:3 Letter Box
Select when you want to see the total
16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio
screen. Black bars will appear at the
top and bottom of the screen.
• 16:9 Wide
Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
Settings
Display
DRC
Audio
Audio Sync
: 0 0 mSec
mSec
: 5025
mSec
50 mSec
System
Language
75 mSec
Security
100 mSec
Support
125 mSec
150 mSec
175 mSec
Move
Select
Return
• You can set the audio delay time between 0 mSec
and 300 mSec. Set it to the optimal status.
You can view the full 16:9 picture on
your widescreen TV.
✎ NOTE



If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.
Since DVD discs are recorded in various image formats, they will
look different depending on the software, the type of TV, and the
TV aspect ratio setting.
Depending on the type(NTSC or PAL) of main unit you have, the
TV display picture may be different.
English
MM-D330D-ENG-0207.indd
17
17
2011-3-16
18:07:58
Setup
Security
System
Initial Setting
By using the Initial Setting, you can set language and
TV aspect setting.
The Parental Lock function works in conjunction with
DVDs that have been assigned a rating which helps you
control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
Parental Rating
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.
Select the rating level you want to set.
A larger number indicates that the program is intended
for adult use only. For example, if you select up to Level
6, discs that contain Level 7, 8 will not play.
Enter the password and then press the ENTER
button.
Language
You can select the language you prefer for
on-screen menu, disc menu, etc.
- The password is set to "0000" by default.
- Once the setup is complete, you will be taken to
the previous screen.
Change Password
Settings
Display
OSD Language
Audio
Disc Menu
System
Audio
Language
Subtitle
Select Change and enter the 4-digit password to set
the parental lock using the number buttons on the
remote control.
English
: ENGLISH
Korean
Chinese
: ENGLISH
Dutch
: ENGLISH
Security
French
Support
German
Settings
Italian
Japanese
Move
Select
Return
Display
Parental Rating
: Off
Audio
Password
: Change
System
Language
Security
Support
OSD
Language
Disc Menu
Audio
Subtitle
Select the language for the onscreen displays.
Select the language for the disc
menu displays.
Select the language for disc audio.
Select the language for disc subtitles.
a To select another language, select OTHERS of Disc
Menu, Audio and Subtitle, and enter the language
code of your country (see page 34).
a You cannot select OTHERS in the OSD Language
menu.
✎ NOTE

The selected language will only appear if it is
supported on the disc.
Move
Select
Return
If you forgot your password
In "NO DISC" mode, press and hold the STOP
() button on the top panel for 5 seconds or
more. All settings will revert to the factory
settings.
Support
Product Information
Provide contact information for assistance with
your product.
18
MM-D330D-ENG-0207.indd
18
English
2011-3-16
18:08:01
Audio CD(CD-DA)/MP3/WMA Playback
2. Place a disc gently into the disc Compartment
with the disc's label facing up.
Basic Functions
3. Press the OPEN/CLOSE button to close the
disc Compartment.
Track01
1/17
✎ NOTE





※
Resume function: When you stop disc play, the
product remembers where you stopped, so when
you press PLAY button again, it will pick up where
you left off. (This function works only with DVDs.)
Press the STOP button twice during playback to
disable the Resume function.
If no buttons are pressed on the product or
remote control for more than 3 minutes when the
product is in Pause mode, it will be changed to
Resume stop mode. and after another 5 minutes
in Resume stop mode, it will be changed to
screen saver mode.
The initial screen may appear different, depending
on the content of the disc.
Pirated discs will not run in this product because
it violates the CSS (Content Scrambling System :
a copy protection system) recommendations.
DTS Audio is not supported.
will appear when an invalid button is pressed.
TV Screen Saver/Power Saving Function
• If the product is left in the stop mode more than 5
minutes without any user interface, a screen saver
will appear on your TV.
• If the product is left in the screen saver mode for
more than 20 minutes, the power will
automatically turn off.
0:15 / 3:59
Function DVD/CD
Repeat Play Mode
1. Insert an Audio CD(CD-DA) or an MP3 Disc into the
disc Compartment.
• For an Audio CD, the first track will be played
automatically.
- Press the #$ buttons to move to the
previous/next track.
• For the MP3/WMA disc, press the ▲▼◄►
buttons to select Music, then press the
ENTER button.
- Press the ▲▼◄► buttons to select a
desired file and press the ENTER button.
- Press the  buttons to move to the
previous/next pages.
2. Press the STOP () button to stop playback.
✎ NOTE



Some MP3/WMA-CDs may not play, depending on
the recording mode.
Table of contents of a MP3-CD varies depending on
the MP3/WMA track format recorded on the disc.
WMA-DRM files cannot be played.
English
MM-D330D-ENG-0207.indd
19
04
BA
1. Press the OPEN/CLOSE button.
Setup /
Disc Playback
03
Basic Functions
19
2011-3-16
18:08:03
Basic Functions
JPEG File Playback
Using the Playback Function
Images captured with a digital camera or camcorder, or
JPEG files on a PC can be stored on a CD and then
played back with this product.
Forward/Reverse Search
dBAD
1. Insert a JPEG disc on the disc Compartment.
2. Press the ◄,► buttons to select the Photos,
and then press the ENTER button.
Press the  buttons for Search Function.
3. Press the ▲▼ buttons to select the folder you
want to play, and then press the ENTER button.
4. Press the ▲▼ buttons to select the photo you
want to play, and then press the ENTER button.
• The selected file will play and slide show will
start.
• To stop slide show, press the PAUSE ()
button.
• You can view the previous/next file by
pressing the ◄,► buttons during the
slideshow mode.
JPEG 1
JPEG 2
JPEG 3
642 X 352
✎ NOTE

No sound is played in search mode.
Skipping Scenes/Songs
dBAD
Press the #$ buttons.
• Each time the button is pressed during playback,
the previous or next chapter, track or directory
(file) will be played.
• You cannot skip chapters consecutively.
../ PICTURES
Slow Motion Play
2010/01/01
Function DVD/CD
1➞2➞3➞4
1➞2➞3➞4
Pages
Return
d
Rotate Function
G
Press the GREEN(B) or YELLOW(C) button during the
PAUSE mode.
• GREEN(B) Button: Rotate 90° Counterclock wise.
• YELLOW(C) Button: Rotate 90° Clockwise.
Press the PAUSE () button and then  button for
Slow Motion play.
d
1 ➞2 ➞3
✎ NOTE


No sound is heard during slow playback.
Reverse slow playback does not work.
✎ NOTE

The maximum resolutions supported by this
product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0
MPixel) for progressive image files.
20
MM-D330D-ENG-0207.indd
20
English
2011-3-16
18:08:05
04
Using the Disc Menu
d
dD
Press the PAUSE button repeatedly.
• The picture moves forward one frame each time
the button is pressed during playback.
You can view the menus for the audio language,
subtitle language, profile, etc.
✎ NOTE
1. During playback, press and hold the DISC
MENU button on the remote control.

No sound is heard during step motion playback.
Basic Functions
Step Motion Play
2. Press the ▲▼◄► buttons to make the desired
selection, then press the ENTER button.
✎ NOTE

5 Minute Skip function
Depending on the disc, menu setup items may
vary and this menu may not be available.
D
During playback, press the ◄,► button.
• Playback skips 5 minutes forward whenever you
press the ► button.
• Playback skips 5 minutes backward whenever
you press the ◄ button.
Using the Title Menu
d
✎ NOTE

You can operate this function only on the DivX.
For DVDs containing multiple titles, you can view the
title of each movie.
1.
During playback, press and hold the TITLE
MENU button on the remote control.
2. Press the ▲▼◄► buttons to make the desired
selection, then press the ENTER button.
✎ NOTE

Depending on the disc, menu setup items may
vary and this menu may not be available.
English
MM-D330D-ENG-0207.indd
21
21
2011-3-16
18:08:06
Basic Functions
Repeat Playback
A-B Repeat Playback
dBAD
dB
DVD/DivX Repeat
You can repeatedly play back a designated section
of a DVD or CD.
You can repeat the title, chapter or the section(A-B
Repeat) of the DVD/DivX.
1. During the DVD disc or CD playback, press and
hold the REPEAT button on the remote control.
Repeat
2. For DVD, press the ▲▼ buttons to select A-.
For CD press and hold the REPEAT button
appears on the TV.
repeatedly until
Off
3. Press the ENTER button at the point where you
want repeat play to start (A).
4. Press the ENTER button at the point where you
want repeat play to stop (B).
1. During the DVD/DivX playback, press and hold
the REPEAT button on the remote control.
2. Press the ▲▼ buttons to select a desired repeat
mode, then press the ENTER button.
3. Press the ▲▼ buttons to select Off to return to
normal play, then press the ENTER button.
Z
D
Off ➞ Title ➞ Chapter ➞ A -
5. To return to normal playback,
For DVD, press and hold the REPEAT button to
select to REPEAT OFF.
For CD, press and hold the REPEAT button to
select to .
✎ NOTE

The A-B Repeat function does not operate with
DivX, MP3 or JPEG discs.
Off ➞ Title ➞ Folder ➞ All
CD/MP3 Repeat
1. During the CD/ MP3 playback, press and hold
the REPEAT button repeatedly to select the
repeat mode you want.
B
A
22
MM-D330D-ENG-0207.indd
22
(Normal Repeat Track Repeat All Random Repeat Section A-B)
(Normal Repeat Track
Repeat DIR Repeat All
Random)
English
2011-3-16
18:08:08
04
d
03/04


001/001
0:00:21
KO 1/2
EN 02/02
1/1
Change
Select


D

2/3
KO 1/2
EN 02/02
Change
when there is more than one in the disc.
For example, if there is more than one
movie on a DVD, each movie will be
identified as a Title.
) : Most DVD discs are
Chapter(
recorded in chapters so that you can
quickly find a specific chapter.
Playing time( ) : Allows playback of
the film from a desired time. You must
enter the starting time as a reference.
The time search function does not
operate on some discs.
): Refers to the film's
Audio(
soundtrack language. A DVD Disc can
contain up to 8 audio languages.
): Refers to the subtitle
Subtitle(
languages available in the disc. You will
be able to choose the subtitle languages
or, if you prefer, turn them off from the
screen. A DVD Disc can contain up to
32 subtitle languages.
): When a DVD contains
Angle(
multiple angles of a particular scene, you
can use the Angle function.
Basic Functions
Displaying Disc Information
Select
Selecting the Audio Language
dD
1. During the playback, press the TOOLS button
on the remote control.
2. Press the ▲▼ buttons to select the desired
item.
3. Press the ◄► buttons to make the desired
setup change and then press the ENTER
button.
- You may use the number buttons of the
remote control to control some item.
4. To make Disc information disappear, press the
TOOLS button again.
1. Press the TOOLS button.
2. Press the ▲▼ buttons to select AUDIO (
display.
)
3. Press the ◄► buttons to select the desired
audio language.
• Depending on the number of languages on a
DVD disc, a different audio language is
selected each time the button is pressed.
✎ NOTE


If you are playing contents from the tools menu, some
functions may not be enabled depending on the disc.
Some tools menu may differ depending on discs and files.
TOOLS menu
 Title(
) : To access the desired title
English
MM-D330D-ENG-0207.indd
23
23
2011-3-16
18:08:11
Basic Functions
Selecting the Subtitle Language
dD
Angle Function
d
1. Press the TOOLS button.
2. Press the ▲▼ buttons to select SUBTITLE (
display.
)
3. Press the ◄► buttons to select the desired
subtitle language.
• Depending on the number of languages on a
DVD disc, a different subtitle language is
selected each time the button is pressed.
This function allows you to view the same scene in
different angles.
1. Press the TOOLS button.
2. Press the ▲▼ buttons to select ANGLE (
display.
)
3. Press the ◄► buttons to select the desired
angle.
✎ NOTE

The Angle function works only with discs on
which multiple angles have been recorded.
✎ NOTE


Depending on the disc, the Subtitle and Audio
Language functions may not be available.
On the DivX fi le format, the subtitle languages
may be represented by only numbers.
Caption Function
D
• You must have some experience with video
extraction and editing in order to use this feature
properly.
• To use the caption function, save the caption file
(*.smi) in the same file name as that of the DivX
media file (*.avi) within the same folder.
Example. Root
Samsung_007CD1.avi
Samsung_007CD1.smi
• Up to 60 alphanumeric characters or 30 East
Asian characters (2 byte characters such as
Korean and Chinese) for the file name.
• The subtitle of DivX files are *.smi, *.sub, *.srt over
148 kbyte is not supported.
24
MM-D330D-ENG-0207.indd
24
English
2011-3-16
18:08:18
04
Basic Functions
Sound Mode
EQ
Your micro-compact system is equipped with a
preset equalizer that allows you to choose the
most appropriate balance between treble and
bass frequencies, according to the type of music
you are listening to.
1.
Press the EQ button until the required optional is
selected.
Select...
To obtain a...
OFF ......................... Normal balance (linear)
RANCHA ................. Banlace suitable for Rancha Music.
SAMBA.................... Banlace suitable for Samba Music.
CUMBIA .................. Banlace suitable for Cumbia Music.
HABANA.................. Banlace suitable for Habana Music.
BOOM BA ............... Banlace suitable for Boom Ba Music.
REGGAE.................. Balance suitable for Reggae Music.
PARTY ..................... Balance suitable for Party Music.
POP......................... Balance suitable for Pop Music.
HIPHOP ................... Balance suitable for HipHop Music.
ROCK ...................... Balance suitable for Rock Music.
JAZZ........................ Balance suitable for Jazz Music.
CLASS..................... Balance suitable for Class Music.
FLAT ........................ Balance suitable for Flat Music.
STA+EQ................... Banlace suitable for Stadium Music.
DYN+S.......................Banlace suitable for Dynamic spot Music.
MP3+ ...................... Banlace suitable for MP3 Enhan Music.
VIR+S ...................... Banlace suitable for Virtual Music.
U1 B 0 ..................... Banlace suitable for User 1 mode Music.
U2 B 0 ..................... Banlace suitable for User 2 mode Music.
U3 B 0 ..................... Banlace suitable for User 3 mode Music.
2.
Set the BASS (left numeric), MIDDLE (middle
numeric), TREBLE (right numeric) level.
Press the ENTER button when you select the U1 B 0 /
U2 B 0 /U3 B 0.
Result: The BASS level(left numeric) flash.
or
button to select from
Press the TUNING
-06 to 06.
Press the ENTER button.
Result: The MIDDLE level(middle numeric) flash.
or
button to select from
Press the TUNING
-06 to 06.
Press the ENTER button.
Result: The TREBLE level(right numeric) flash.
or
button to select from
Press the TUNING
-06 to 06.
Press the ENTER button.
Result: setting is completed.
✎ NOTE

When CD Recording, the EQ function can't work
and the EQ automatically covery to "OFF" mode.

This function is not available during playback of
an DVD disc.

If no buttons is pressed within 8 seconds, the
setting will automatically be cancelled. and the
anterior setting will be saved.
P BASS
Your micro-compact system has a bass
amplification function called Power Bass.This
function makes the sound more powerful and real.
1.
Press and hold the SOUND button on the
remote control.
Result: “P BASS” is displayed.
2. To cancel this function, press this button
again, “P OFF” is displayed for a few
seconds.
✎ NOTE

When CD Recording, the Power Bass function
can't work and the Power Bass automatically
covery to "OFF" mode.
English
MM-D330D-ENG-0207.indd
25
25
2011-3-16
18:08:19
Basic Functions
Mute Function
Display Function
This is useful when answering a doorbell or
telephone call.
You can view all functions available on the display,
adjust the brightness of the display.
1. Press MUTE button:
1. Each time you press and hold the DISPLAY
button on the remote control, the display mode
will change as follows:


‘ MUTE ’ appears in the display.
To switch the sound back on, press the MUTE
button again or the VOL-, + button.

The Demo function
All functions available on the system appear on the
front panel display.

The Dimmer function
The Dimmer function is selected and the display
darkens.

Display ON
The Display turns on.

Clock ON
The Clock you set is displayed.
Connecting
26
MM-D330D-ENG-0207.indd
26
English
2011-3-16
18:08:21
04
Using buttons on the Remote Control
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station.
• Automatic Tuning 1 : Press the STOP button
to select PRE 01 and then press TUNING (
) buttons to select the preset station.
• Automatic Tuning 2 : Press the STOP button
to select MANUAL and then press and hold
) button to automatically
the TUNING (
search for active broadcasting stations.
• Manual Tuning : Press the STOP button to
select MANUAL and then briefly press the
) button to increase or decrease
TUNING (
the frequency incrementally.
Using buttons on the product
1. Press the F(
) button to select FM .
2. Select a broadcast station.
• Automatic Tuning 1 : Press the STOP (  )
button to select PRESET and then press the
# $ buttons to select the preset station.
Presetting Stations
Example : Presetting FM 89.10 in the memory
1. Press the FUNCTION button to select FM.
2. Press the STOP (  ) button on the top panel to
select <MANUAL> mode.
3. Press the TUNING (
) button to select
<89.10>.
4. Press the ENTER button.
• Number flashes on the display.
5. Press the # $ buttons on the top panel to
select preset number.
• You can select between 1 and 15 presets.
Basic Functions
Listening to Radio
6. Press the ENTER button again.
• Press the ENTER button before number
disappears from the display.
• Number disappears from the display and the
station is stored in memory.
7. To preset another station, repeat steps 2 to 6.
• To tune in to a preset station, press the
TUNING (
) buttons on the remote control to
select a channel.
• Automatic Tuning 2 : Press the STOP (  )
button to select MANUAL and then press and
hold the # $ buttons to automatically
search the band.
• Manual Tuning : Press the STOP (  ) button
to select MANUAL and then press the # $
buttons to tune in to a lower or higher
frequency.
Setting Mono/Stereo
Press the MO/ST button.
• Each time the button is pressed, the sound
switches between STEREO and MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
✎ NOTE

This applies only when listening to an FM
station.
About RDS
broadcasting(optional)
Using the RDS (Radio Data System) to
receive FM stations
RDS allows FM stations to send an additional
signal along with their regular program signals.
For example, the stations send their station names,
as well as information about what type of program
they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the RDS
service, the RDS indicator lights up on the display.
Description on RDS function
• PTY (Program Type) : Displays the type of programme
currently being broadcast.
• PS NAME (Program Service Name) : Indicates the name of
broadcasting station and is composed of 8 characters.
• RT (Radio Text) : Decodes the text broadcast by a station (if
any) and is composed of maximum 64 characters.
English
MM-D330D-ENG-0207.indd
27
27
2011-3-16
18:08:23
Basic Functions
• CT (Clock Time) : Decodes the real time clock from the FM
frequency. Some stations may not transmit PTY, RT or CT
information therefore this may not be displayed in all cases.
• TA (Traffic Announcement) : When this symbol flashes it
shows that the traffic announcement is in progress.
✎ NOTE

RDS may not operate correctly if the station tuned
is not transmitting RDS signal properly or if the
signal strength is weak.
To show the RDS signals
You can see the RDS signals the station sends on the display.
Press the RDS DISPLAY button while listening to an FM
station.
• Each time you press the button, the display
change to show you the following information : PS
NAME RT
CT Frequency
PS
(Program Service)
While searching, <PS> appears
and then the station names will be
displayed. <NO PS> appears if no
signal is sent.
RT(RadioText)
While searching, <RT> appears and
then text messages the station sends
will be displayed. <NO RT> appears if
no signal is sent.
CT (Clock Time)
Frequency
To search for a program using the PTY
codes
Before you start!
• The PTY Search is only applicable to preset stations.
• To stop searching any time during the process,
press the STOP button while searching.
• There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start from
step 1 again.
• When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station using the primary remote control.
Some stations may not transmit PTY,
RT or CT information therefore this
may not be displayed in all cases.
) button until the PTY
2. Press the TUNING (
code you want appears on the display.
• The display gives you the PTY codes
described to the right.
Station frequency (non-RDS
service)
3. Press the RDS PTY button again, while the PTY code
selected in the previous step is still on the display.
• The display window cannot differentiate upper case
and lower case letters and always uses upper case
letters.
• The display window cannot show accented letters,
<A,> for instance, may stands for accented <A’s>
like <À, Â, Ä, Á, Å and Ã.>
28
One of the advantages of the RDS service is that
you can locate a particular kind of program from
the preset channels by specifying the PTY codes.
1. Press the RDS PTY button while listening to an
FM station.
When the display shows PS,or RT signals,the following
characters are used.
MM-D330D-ENG-0207.indd
PTY-SEARCH function
Decodes the real time clock from the
FM frequency.
About characters shown in the display
28
PTY (Program Type) indication and
• The centre unit searches 30 preset FM stations,
stops when it finds the one you have selected,
and tunes in that station.
✎ NOTE
* This product may not have the RDS function depending on
your region.
English
2011-3-16
18:08:28
04
For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the
POWER button.
2. Press and hold TIMER/CLOCK button and
then press the ENTER button.
Result: "CLOCK" is displayed.
3. Press ENTER.
Result: The hour flashes.


Decrease the hours: ◄
Increase the hours: ►
4. When the correct hour is displayed, press
ENTER.
Result: The minutes flashes.


Decrease the minutes: ◄
Increase the minutes: ►
Timer Function
The timer enables you to switch the system on or off
at specific times automatically.



Example: You wish to wake up to music every morning.
1. Switch the system on by pressing the
POWER button.
2. Press and hold the TIMER/CLOCK button and
then press ◄ or ► buttons until TIME is
displayed.
3. Press the ENTER (
4. Set the timer switch-on time.
Result: "TIME" appears in the display.
 The current time is now set.
a
b
Press the ◄ or ► button.
) button.
Press the ENTER (
c
d
Result: The minutes flash.
Press the ◄ or ► button.
) button.
Press the ENTER (
Result: OFF is displayed for a few seconds, you
can now set the timer switch-off time.
✎ NOTE

You can display the time, even when you are using another
function, by pressing and hold the TIMER/CLOCK button
once.
You can also use # or $ on the top panel instead of
buttons in step 3,4.
) button.
Result: ON is displayed for a few seconds,you can set
the timer switch-on time.
5. When the correct minute is displayed, press
ENTER.

Before setting the timer, check that the current time
is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
If you no longer want the system to be switched on
or off automatically, you must cancel the timer.
Basic Functions
Setting the Clock
5. Set the timer switch-off time.
a
b
Press the ◄ or ► button.
) button.
Press the ENTER (
c
d
Result: The minutes flash.
Press the ◄ or ► button.
) button.
Press the ENTER (
Result: VOL XX is displayed, where XX
corresponds to the volume already set.
6. Press ◄ or ► button to adjust the volume level
and press the ENTER (
) button.
Result: The source to be selected is displayed.
7. Press the ◄ or ► button to select the desired
source to be played when the system switches on.



) button.
FM (radio) : a Press the ENTER (
b Select a preset station by press
the ◄ or ► button.
DVD/CD : Load one Audio disc.
USB : Connect the USB device.
✎ NOTE

If the auto timer is turned on, the DVD/CD or USB
function may require an additional step to be
activated depending on the disc (or device). So it is
better for you to select the tuner function instead.
English
MM-D330D-ENG-1102.indd
29
29
2011-11-3
13:48:33
Basic Functions
Sleep Timer Function
8. Press the ENTER (
) button.
You can set the time that the DVD player will shut
itself off.
Result: CHK REC (Do you want to record?) is displayed.
9. Press the ENTER (
) button.
Result: REC N is displayed, you can press the ◄ or ►
button to select the REC Y or REC N, and then press
ENTER button.
1). If you select the REC N, it will cancel tuner timing
recording even if you have already set the tuner
timing recording.
1. Press and hold SLEEP button:

2. Press and hold the SLEEP button once or more
times to indicate how long the system should
continue playing before it switches off:
90MIN Š 60MIN Š 45MIN Š 30MIN Š 15MIN Š
SLPOFF
2). If you select the REC Y, you can set the tuner timing
recording.
) button.
a. Press the ENTER (
Result: ON is displayed for a few seconds, you
can set the tuner timing recording switch-on time.
) button.
b. Press the ENTER (
Result: OFF is displayed for a few seconds, you
can set the tuner timing recording switch-off time.
Result: The playback starts and the following
indications are displayed: 90MIN
At any time, you can:
check the remaining time by pressing and holding the
SLEEP button.
 Change the remaining time by repeating steps 1
and 2.

3.
To cancel the sleep timer, press and hold SLEEP
button until SLPOFF appears on the display.
✎ NOTE


The maximal tuner timing recording time is 5 hours.
If the timer switch on and off times are identical, the
word ERROR is displayed.
If the switch-on or -off time is the same as the timing
recording time, only the switch-on or -off time is
effective, and the timing recording time is not applied.
If there is no disc or usb, when you select the “DVD/CD,


USB, it will automatically change to “TUNER”.
Cancelling the Timer
After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you can cancel it.
1. To cancel the timer, press and hold TIMER ON/
OFF once.
Result:
is no longer displayed.
2. To resume the timer, press and hold TIMER ON/
OFF again.
Result:
30
MM-D330D-ENG-0207.indd
30
is displayed again.
English
2011-3-16
18:08:31
04
Advanced Functions
Playing Media Files using the
USB Host Feature
2. Connect the external USB storage device you want
to record to the USB jack (
) of the main unit
3. Play a Disc, adjust the Radio frequency or
connect the external source to the main unit.
CD (See page 19)
500mA
PHONES
AUX IN




1. Connect the external USB storage device to the
USB jack of the main unit.
Tuner (See page 27)
2. Select the USB mode by pressing the F(
)
button on the main unit.
• You can select USB by pressing the
FUNCTION button on the remote control.

3. Press the ◄► buttons to select Videos, Music
or Photo.
- Select a file to play.

Safe USB Removal
To prevent damage to the memory stored in the USB
device, perform safe removal before disconnecting
the USB cable.
• Press and hold the YELLOW(C) button.
- REMOVE will appear on the display.
• Remove the USB cable.
✎ NOTE

Remove the USB cable from the USB port
slowly. Otherwise, it may cause damage to the
USB port.
Press the F( ) button on the main unit to select
the DVD/CD function.
Press the OPEN/CLOSE button to open the Disc
Compartment.
Insert a CD and press the OPEN/CLOSE button to
close the Disc Compartment.
Use the CD selection ( # or $ ) button to select
the desired song.
Advanced Functions
1. Switch the system on by pressing the
POWER button.
05
You can enjoy media files such as pictures, movies
and music saved on an MP3 player, USB memory
stick or digital camera in high quality video with 2.0
channel sound by connecting the storage device to
the USB port of the product.
B
You can record sound of the CD, the Radio
Broadcasting or sound from the external source into
the USB storage device.
Basic Functions /
Recording Function
USB Function

Press the F( ) button on the main unit to select the
FM function.
Adjust the Radio frequency you want to record.
External Source (See page 14)


Connect an External Component/MP3 player to the
main unit.
Press the FUNCTION button to select the AUX .
Play a song from the external device.
4. Press the USB REC button to start recording.
CD




“TRACK RECORDING” is displayed and CD
recording starts.
Press and hold the USB REC button to start
recording the all tracks of Disc.
“FULL CD RECORDING” is displayed.
If you record the MP3 Disc, the file is copied into the
USB device totally.
“PROCESSING XX%”” is displayed on TV. When
the recording is done, “STOP” will be displayed.
If there is the same file name, "FILE EXISTED" is
displayed on TV, and the function is canceled.
Tuner/External Source

“RECORDING” is displayed.
English
MM-D330D-ENG-0207.indd
31
31
2011-3-16
18:08:34
Advanced Functions
5. To stop recording, press the STOP (  ) button
and then automatically create and save as the
MP3 file.

After the recording, a directory named
“RECORDING”(CD), “CD COPY”(MP3 CD), “TUNER
RECORDING” or “AUX RECORDING” will be created
in your device.
✎ NOTE










Do not disconnect the USB or the AC Cord during the
recording as this may cause file damage.
If you disconnected USB device during the recording,
the main unit will be power off and you may not delete
the recorded file, In this case, please connect the USB
device to the PC and backup the USB data on the PC
first and then format the USB device.
When the USB memory is not enough, it will be
displayed “NOT ENOUGH MEMORY”.
The recording works if the USB device or the HDD is
formatted in the FAT file system. (The NTFS file system
is not supported.)
When you use CD high speed search function, the CD
recording can’t work.
Sometimes, the recording time may be longer with
some USB devices. (See page 8)
When the CD recording, the EQ functions can not work
and automatically change to OFF.
When the CD recording, the REPEAT function can not
work and automatically changes to OFF.
You can not record the radio when searching or no
available frequencies in the Tuner mode.
Note that setting the input level too loud when
recording music from an external device through the
AUX and USB channel may introduce noise into the
recording. In that case, lower the external device’s
volume level.
32
MM-D330D-ENG-0207.indd
32
Recording Speed
1. Each time you press and hold the CD REC
SPEED button on the remote control, the
recording speed will change as follows:
RECORDSPD x 1ŠRECORDSPD x 3

While the Tuner or External Source is recording,
the recording speed does not supported.

When you select RECORDSPD x 3, the audio
sound will not be output.
English
2011-3-16
18:08:35
05
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and
contact the nearest authorized dealer or Samsung Electronics Service Center.
05
Symptom
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback,and step motion playback.
• Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
The remote control does not work.
• Is the remote control being operated within its operation range of angle and
distance?
• Are the batteries drained?
• Disc is rotating but no
picture is produced.
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
Other infromation
I cannot eject the disc.
• Picture quality is poor and
picture is shaking.
Audio language and subtitles do
not work.
• Audio language and subtitles will not work if the disc does not contain them.
The menu screen does not appear
even when the menu function is
selected.
• Are you using a disc that does not contain menus?
Aspect ratio cannot be changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN
SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc
jacket and then select the appropriate function.
English
MM-D330D-ENG-0207.indd
33
Advanced Functions /
Other Information
33
2011-3-16
18:08:36
Other Information
Information
Other
Symptom
Check/Remedy
• The product is not working.
(Example: The power goes out or
the top panel key doesn't work or
a strange noise is heard.)
• While “NO DISC” message appears on the display of the product, press and hold the
STOP () button on the main unit for longer than
5 seconds with no disc (reset function).
• The product is not working
normally.
The rating level password has been
forgotten.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Can't receive radio broadcast.
• While “NO DISC” message appears on the display of the product, press and hold the
main unit's STOP () button for longer than 5 seconds. “INIT” appears on the display
and all settings will return to the default values.
And then press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an area with good
reception.
Language code list
Enter the appropriate code number for OTHERS of Disc Menu, Audio and Subtitle. (See page 18).
Code
Language
Code
Language
Code
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1142
Greek
1239
Interlingue
1345
Malagasy
1482
Kirundi
1527
1028
Abkhazian
1144
English
1245
Inupiak
1347
Maori
1483
Romanian
1528
Thai
1032
Afrikaans
1145
Esperanto
1248
Indonesian
1349
Macedonian
1489
Russian
1529
Tigrinya
1039
Amharic
1149
Spanish
1253
Icelandic
1350
Malayalam
1491
Kinyarwanda
1531
Turkmen
1044
Arabic
1150
Estonian
1254
Italian
1352
Mongolian
1495
Sanskrit
1532
Tagalog
1045
Assamese
1151
Basque
1257
Hebrew
1353
Moldavian
1498
Sindhi
1534
Setswana
1051
Aymara
1157
Persian
1261
Japanese
1356
Marathi
1501
Sangro
1535
Tonga
1052
Azerbaijani
1165
Finnish
1269
Yiddish
1357
Malay
1502
Serbo-Croatian
1538
Turkish
1053
Bashkir
1166
Fiji
1283
Javanese
1358
Maltese
1503
Singhalese
1539
Tsonga
1057
Byelorussian
1171
Faeroese
1287
Georgian
1363
Burmese
1505
Slovak
1540
Tatar
1059
Bulgarian
1174
French
1297
Kazakh
1365
Nauru
1506
Slovenian
1543
Twi
1060
Bihari
1181
Frisian
1298
Greenlandic
1369
Nepali
1507
Samoan
1557
Ukrainian
1069
Bislama
1183
Irish
1299
Cambodian
1376
Dutch
1508
Shona
1564
Urdu
1066
Bengali;
Bangla
1186
Scots Gaelic
1300
Canada
1379
Norwegian
1509
Somali
1572
Uzbek
1067
Tibetan
1194
Galician
1301
Korean
1393
Occitan
1511
Albanian
1581
Vietnamese
1070
Breton
1196
Guarani
1305
Kashmiri
1403
(Afan) Oromo
1512
Serbian
1587
Volapuk
1079
Catalan
1203
Gujarati
1307
Kurdish
1408
Oriya
1513
Siswati
1613
Wolof
1093
Corsican
1209
Hausa
1311
Kirghiz
1417
Punjabi
1514
Sesotho
1632
Xhosa
1097
Czech
1217
Hindi
1313
Latin
1428
Polish
1515
Sundanese
1665
Yoruba
1103
Welsh
1226
Croatian
1326
Lingala
1435
Pashto, Pushto
1516
Swedish
1684
Chinese
1105
Danish
1229
Hungarian
1327
Laothian
1436
Portuguese
1517
Swahili
1697
Zulu
1109
German
1233
Armenian
1332
Lithuanian
1463
Quechua
1521
Tamil
1130
Bhutani
1235
Interlingua
1334
Latvian,
Lettish
1481
RhaetoRomance
1525
Tegulu
34
MM-D330D-ENG-0207.indd
34
Tajik
English
2011-3-16
18:08:37
06
Other Information
Specifications
General
FM Tuner
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
DVD (Digital Versatile Disc)
Disc(1 Disc)
CD : 12 cm (COMPACT DISC)
CD : 8 cm (COMPACT DISC)
Video/Audio
Amplifier
Component Video
1.78 Kg
200 (W) x 142(H) x 207(D) mm
+5°C~+35°C
10 % to 75 %
55 dB
12 dB
0.6 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Front speaker output
35 W/CH (8 Ω) x2
Frequency range
20Hz~20KHz
S/N Ratio
70dB
Channel separation
60dB
Input sensitivity
(AUX)900mV
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifi cations are subject to change without prior notice.
- For the power supply and Power Consumption, refer to the label attached to the product.
English
MM-D330D-ENG-0207.indd
35
35
2011-3-16
18:08:38
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Area
Contact Center WebSite
` North America
Canada
Mexico
U.S.A
1-800-SAMSUNG (726-7864)
01-800-SAMSUNG (726-7864)
1-800-SAMSUNG (726-7864)
www.samsung.com
www.samsung.com
www.samsung.com
0800-333-3733
0800-124-421 / 4004-0000
800-SAMSUNG (726-7864)
01-8000112112
0-800-507-7267
1-800-751-2676
1-800-10-7267
800-6225
1-800-299-0013
800-7919267
1-800-234-7267
00-1800-5077267
800-7267
0-800-777-08
1-800-682-3180
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
1-800-SAMSUNG (726-7864)
www.samsung.com
0-800-100-5303
www.samsung.com
42 27 5755
0810 - SAMSUNG (7267864,
€ 0.07/min)
-
` Latin America
Argentine
Brazil
Chile
Colombia
Costa Rica
Dominica
Ecuador
El Salvador
Guatemala
Honduras
Jamaica
Nicaragua
Panama
Peru
Puerto Rico
Trinidad &
Tobago
Venezuela
` Europe
Albania
Austria
Belgium
02-201-24-18
Bosnia
Bulgaria
Croatia
05 133 1999
07001 33 11
062 SAMSUNG (062 726 7864)
800-SAMSUNG (800-726786)
Samsung Zrt., česká organizační
složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
70 70 19 70
030 - 6227 515
01 48 63 00 00
01805 - SAMSUNG (726-7864
€ 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
+381 0113216899
261 03 710
023 207 777
020 405 888
0900-SAMSUNG
(0900-7267864) (€ 0,10/Min)
815-56 480
0 801 1SAMSUNG (172678)
/ 022-607-93-33
80820-SAMSUNG (726-7864)
1. 08010 SAMSUNG (72678) doar din reţeaua Romtelecom,
tarif local
2. 021.206.01.10 - din orice
reţea, tarif normal
Czech
Denmark
Finland
France
Germany
Hungary
Italia
Kosovo
Luxemburg
Macedonia
Montenegro
Netherlands
Norway
Poland
Portugal
Rumania
MM-D330D-ENG-0207.indd
36
www.samsung.com
www.samsung.com/
be (Dutch)
www.samsung.com/
be_fr (French)
www.samsung.com
www.samsung.com
www.samsung.com
Area
Serbia
Slovakia
Spain
Sweden
0848-SAMSUNG (7267864,
CHF 0.08/min)
U.K
Eire
Lithuania
Latvia
Estonia
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
Uzbekistan
Kyrgyzstan
Tadjikistan
8-800-555-55-55
8-800-555-555
0-800-05-555
088-55-55-555
8-10-800-500-55-500
(GSM: 7799)
8-10-800-500-55-500
00-800-500-55-500
8-10-800-500-55-500
Ukraine
0-800-502-000
Belarus
Moldova
810-800-500-55-500
00-800-500-55-500
Kazakhstan
Australia
New Zealand
China
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858 / 010-6475 1880
Hong Kong
(852) 3698 4698
India
www.samsung.com
Philippines
www.samsung.com
www.samsung.com
www.samsung.com
-
Singapore
Thailand
Taiwan
Vietnam
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/ch
www.samsung.com/
ch_fr/(French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.ua
www.samsung.com/
ua_ru
-
` Asia Pacific
Indonesia
www.samsung.com
WebSite
www.samsung.com
` CIS
Russia
Georgia
Armenia
Azerbaijan
Japan
Malaysia
www.samsung.com
0700 Samsung (0700 726
7864)
0800-SAMSUNG (726-7864)
902-1-SAMSUNG (902 172 678)
0771 726 7864 (SAMSUNG)
Switzerland
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
Contact Center 3030 8282 / 1800 110011 /
1800 3000 8282 / 1800 266 8282
0800-112-8888 /
021-5699-7777
0120-327-527
1800-88-9999
1-800-10-SAMSUNG(726-7864) /
1-800-3-SAMSUNG(726-7864) /
1-800-8-SAMSUNG(726-7864) /
02-5805777
1800-SAMSUNG (726-7864)
1800-29-3232 / 02-689-3232
0800-329-999
1 800 588 889
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/hk
www.samsung.com/
hk_en/
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
` Middle East
Bahrain
Egypt
Jordan
Morocco
Oman
Saudi Arabia
Turkey
U.A.E
8000-4726
08000-726786
800-22273
080 100 2255
800-SAMSUNG (726-7864)
9200-21230
444 77 11
800-SAMSUNG (726-7864)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
0800-SAMSUNG (726-7864)
0860-SAMSUNG (726-7864 )
www.samsung.com
www.samsung.com
` Africa
Nigeria
South Africa
2011-3-16
18:08:39
Correct disposal of batteries in this product(optional)
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not
be disposed of with other household waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference
levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm
to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of
waste and recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment(optional)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
Code No. AH68-02349B(Rev 0.0)
MM-D330D-ENG-0207.indd
37
2011-3-16
18:08:40
Download PDF