Samsung | HT-A100 | Samsung HT-A100 Quick Guide

quick start guide
2 remote control functions
1
2
2.1CH Digital
Home Cinema System
HT-A100
HT-A100C
HT-A100W
1 disc playback
2 remote control functions
3 connecting the speakers
4 connecting the video out to your tv
5 connecting audio from external components
6 listening to radio
3
17
18
19
1
DVD RECEIVER button
You can operate your DVD receiver with the
remote control.
2
TV button
You can operate your Samsung TV with the
remote control.
20
21
1 disc playback
9
25
26
1. Load a disc vertically into the Disc Insert Hole.
• Place a disc gently into the tray with the disc’s label facing up.
2. Close the compartment by pressing the PLAY (
27
) button.
• Playback starts automatically.
28
10
30
12
13
31
32
14
33
15
16
HT-A100-ELS-ENG-QG_0304.indd 1-3
20
EJECT button
21
CANCEL button
Used to cancel a wrong entry.
22
PAUSE button
Press to pause.
23
PLAY button
Press to play or pause.
STOP button
Press to stop.
SEARCH buttons
Fast backward or forward through a song/
scene.
5
REMAIN button
For checking the total and remaining time of
a title or chapter being played.
6
STEP button
The picture moves forward one frame each
time the button is pressed during playback.
7
Tuning Preset/CD Skip buttons
Tune in radio broadcasting, skip the song/
scene.
8
VOLUME button
Press + to raise the volume and – to lower it.
24
TUNING/CH button
Press to select the channel or to tune in radio
broadcasting.
9
MENU button
Press to see the menu.
25
MUTE button
Press to mute the sound.
10
AUDIO button
Selects the disc Audio language.
26
RETURN button
Press to return to the previous menu.
11
TUNER MEMORY, SD/HD button
Press to memorize radio frequencies.
Press to select SD or HD mode.
27
Cursor/Enter button
Used to select or move up/down, left/right
when setting the menu function.
12
LOGO button
COPY LOGO DATA will be displayed on the
TV screen.
28
SUBTITLE button
Selects the disc subtitle language.
29
13
V-SOUND(Virtual Sound), V-H/P(Virtual
Headphone) button
EXIT button
Press to exit the setup screen.
14
P.BASS button
Select the level of low tones you desire.
30
INFO button
View or change disc playback information on
screen.
15
SLEEP button
Press to set the sleep off time.
31
REPEAT button
Repeat playback of a chapter, title, group or
track.
32
ZOOM button
Enlarges the picture during disc playback.
16
SLOW button
Selects three different slow motion playback
speeds.
MO/ST button
You can listen to radio broadcasts in MONO
or STEREO.
33
DIMMER button
The front display brightness will be adjusted.
17
1 - English
TV/VIDEO button
Press to select TV in VIDEO mode.
Number (0~9) buttons
29
11
19
4
23
24
PORT button
Press to select the USB mode.
3
22
8
18
POWER button
Press to turn the Home Cinema or your
Samsung TV On/Off.
4
5
6
7
3 connecting the speakers
DVD button
Press to select the DVD mode.
TUNER button
Press to listen to radio broadcasting.
AUX button
Press to select external audio input.
2 - English
1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and
then release the tab.
3. Connect the connecting plugs to the back of the Home Cinema.
• Make sure the colors of the speaker terminals match the colors of the connecting plugs.
Front Speaker (R)
Black
Red
Front Speaker (L)
Subwoofer
J
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
 When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
 Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances into the duct
(hole) of the subwoofer speaker.
 Do not hang the subwoofer on the wall through the duct (hole).
M
If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated by the speaker. If this occurs,
place the speaker away from your TV set.
3 - English
2008-03-06 �� 6:58:17
4 connecting the video out to your tv
Choose one of the four methods for connecting to a TV.
5 connecting audio from external components
6 listening to radio
AUX1 : Connecting an External Component/MP3 player
Connecting the FM Antenna
Components such as an MP3 Player.
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
1. Connect AUX IN 1 (Audio) on the Home Cinema to the Audio Out of the external component/MP3 player.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid
surface.
2. Press the AUX button on the remote control to select AUX1 input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD  DIGITAL IN  AUX 1  AUX 2  USB  FM.
FM Antenna
(supplied)
Audio Cable
(not supplied)
Audio OUT
METHOD3
(supplied)
METHOD2
METHOD1
AUX2 : Connecting an External Analog Component
Listening to Radio
Analog signal components such as a VCR.
Remote Control
1. Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of
the external analog component.
• Be sure to match connector colors.
METHOD 1 : HDMI
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Home Cinema to the HDMI IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a component video cable(not supplied) from the
Component Video Output (Pr, Pb and Y) Connectors on the back of the main unit to the Component Video Input Connectors
on your TV.
2. Press the AUX button on the remote control to select AUX 2 input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD  DIGITAL IN  AUX 1  AUX 2  USB  FM.
M
1. Press the TUNER button to select the FM band.
2. Tune in to the desired station.
• Automatic Tuning 1 : When the [, ] button is pressed, a preset broadcast station is selected.
• Automatic Tuning 2 : Press and hold the ,, . button to automatically search for active broadcasting stations.
• Manual Tuning : Briefly press the ,, . button to increase or decrease the frequency incrementally.
Audio Cable (not supplied)
If the external analog
component has only one Audio
Out, connect either left or right.
You can connect the Video Output jack of your VCR to the TV, and connect
the Audio Output jacks of the VCR to this product.
METHOD 3 : Composite Video
Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO IN jack on your TV.
M
 If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home Theater using the TV's remote control.
This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).
 Please check the
logo (If your TV has an
logo, then it supports the Anynet+ function.)
1. Press the FUNCTION button to select the FM band.
2. Select a broadcast station.
• Automatic Tuning 1 : Press the STOP (T) button to select PRESET and then press the [, ] button to select the
preset station.
• Automatic Tuning 2 : Press the STOP (T) button to select MANUAL and then press and hold the [, ] button to
automatically search the band.
• Manual Tuning : Press the STOP (T) button to select MANUAL and then briefly press the [, ] button to tune in to a
lower or higher frequency.
M
OPTICAL : Connecting an External Digital Component
The resolution from the Component Output is 480i.
Main Unit
This unit does not receive AM broadcasts.
Digital signal components such as a Cable Box/Satellite receiver (Set-Top
Box).
1. Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital
Output of the external digital component.
2. Press the AUX button on the remote control to select DIGITAL IN.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD  DIGITAL IN  AUX 1  AUX 2  USB  FM.
Optical Cable(not supplied)
4 - English
HT-A100-ELS-ENG-QG_0304.indd 4-6
5 - English
6 - English
2008-03-06 �� 6:58:23
Download PDF