Samsung | HT-J5550W | Samsung Blu-ray Home Entertainment System J5550 Benutzerhandbuch

HT-J5500
HT-J5550W
User manual
5.1CH Blu-ray™
Home Entertainment System
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
www.samsung.com/register
This Nanum Gothic Eco font is provided by NAVER.
HT-J5500_J5550W_XU-0302_ECO.indd 1
2015-04-02
1:55:52
Safety Information
✎
The following also applies to the Wireless Receiver Module (SWA-7000).
This symbol indicates that high voltage
is present inside. It is dangerous to
make any kind of contact with any
internal part of this product.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE THE COVER (OR BACK). THERE ARE NO
USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
●
●
●
●
●
●
●
The slots and openings in the cabinet and in the back
or bottom are provided for necessary ventilation. To
ensure reliable operation of this apparatus, and to
protect it from overheating, these slots and openings
must never be blocked or covered.
- Do not place this apparatus in a confined space,
such as a bookcase, or built-in cabinet, unless
proper ventilation is provided.
- Do not place this apparatus near or over a radiator
or heat register, or where it is exposed to direct
sunlight.
- Do not place vessels (vases etc.) containing water
on this apparatus. A water spill can cause a fire or
electric shock.
Do not expose this apparatus to rain or place it
near water (near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or near a
swimming pool, etc.). If this apparatus accidentally
gets wet, unplug it and contact an authorized dealer
immediately.
This apparatus uses batteries. In your community,
there might be environmental regulations that require
you to dispose of these batteries properly. Please
contact your local authorities for disposal or recycling
information.
Do not overload wall outlets, extension cords or
adaptors beyond their capacity, since this can result in
fire or electric shock.
Route power-supply cords so that they are not likely
to be walked on or pinched by items placed on or
against them. Pay particular attention to cords at the
plug end, at wall outlets, and the point where they
exit from the apparatus.
To protect this apparatus from a lightning storm,
or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will
prevent damage to the set due to lightning and
power line surges.
Before connecting the AC power cord to the DC
adaptor outlet, make sure the voltage designation
of the DC adaptor corresponds to the local electrical
supply.
This symbol indicates that important
literature concerning operation and
maintenance has been included with
this product.
●
●
●
●
●
●
●
●
Never insert anything metallic into the open parts
of this apparatus. Doing so may create a danger of
electric shock.
To avoid electric shock, never touch the inside of this
apparatus. Only a qualified technician should open
this apparatus.
Make sure to plug the power cord in until it is firmly
seated. When unplugging the power cord from a wall
outlet, always pull on the power cord's plug. Never
unplug by pulling on the power cord. Do not touch
the power cord with wet hands.
If this apparatus does not operate normally - in
particular, if there are any unusual sounds or smells
coming from it - unplug it immediately and contact an
authorized dealer or service centre.
Maintenance of Cabinet.
- Before connecting other components to this
product, be sure to turn them off.
- If you move your product suddenly from a cold
place to a warm place, condensation may occur on
the operating parts and lens and cause abnormal
disc playback. If this occurs, unplug the product,
wait for two hours, and then connect the plug to
the power outlet. Then, insert the disc, and try to
play back again.
Be sure to pull the power plug out of the outlet if
the product is to remain unused or if you are leaving
the house for an extended period of time (especially
when children, elderly, or disabled people will be left
alone in the house).
- Accumulated dust can cause an electric shock, an
electric leakage, or a fire by causing the power cord
to generate sparks and heat or the insulation to
deteriorate.
Contact an authorized service centre for information
if you intend to install your product in a location with
heavy dust, high or low temperatures, high humidity,
chemical substances, or where it will operate 24 hours
a day such as in an airport, a train station, etc. Failing
to do so may lead to serious damage of your product.
Use only a properly grounded plug and wall outlet.
- An improper ground may cause electric shock or
equipment damage. (Class l Equipment only.)
2 - English
HT-J5500_J5550W_XU-0302_ECO.indd 2
2015-04-02
1:56:05
●
●
●
●
●
●
●
●
●
WARNING :
● TO PREVENT THE SPREAD OF FIRE,
KEEP CANDLES AND OTHER ITEMS
WITH OPEN FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
● To reduce the risk of fire or electric
shock, do not expose this appliance to rain or
moisture.
CLASS 1 LASER PRODUCT
This product is classified as a CLASS 1 LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION :
● INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
3D Precautions
IMPORTANT HEALTH AND SAFETY INFORMATION FOR
3D PICTURES.
Read and understand the following safety information
before using the 3D function.
● Some viewers may experience discomfort while
viewing 3D TV such as dizziness, nausea, and
headaches.
If you experience any such symptom, stop viewing 3D
TV, remove the 3D Active Glasses, and rest.
● Watching 3D images for an extended period of time
may cause eye strain. If you feel eye strain, stop
viewing 3D TV, remove your 3D Active Glasses, and
rest.
● A responsible adult should frequently check on
children who are using the 3D function.
If there are any reports of tired eyes, headaches,
dizziness, or nausea, have the child stop viewing 3D
TV and rest.
● Do not use the 3D Active Glasses for other purposes
(such as general eyeglasses, sunglasses, protective
goggles, etc.)
● Do not use the 3D function or 3D Active Glasses while
walking or moving around. Using the 3D function or
3D Active Glasses while moving around may cause
you to bump into objects, trip, and/or fall, and cause
serious injury.
● If you want to enjoy 3D content, connect a 3D device
(3D compliant AV receiver or TV) to the product’s
HDMI OUT port using a high-speed HDMI cable. Put
on 3D glasses before playing the 3D content.
● The product outputs 3D signals only through an HDMI
cable connected to the HDMI OUT port.
● The video resolution in 3D play mode is limited to
the resolution of the original 3D video. You cannot
change the resolution to your preference.
● Some functions such as BD Wise, screen size
adjustment, and resolution adjustment may not
operate properly in 3D play mode.
● You must use a high-speed HDMI cable for proper
output of the 3D signal.
● Stay at least three times the width of the screen from
the TV when watching 3D images. For example, if
you have a 46 inch screen, stay 3.5 meters from the
screen.
● Place the 3D video screen at eye level for the best 3D
picture.
● When the product is connected to some 3D devices,
the 3D effect may not function properly.
● This product does not convert 2D content into 3D.
● "Blu-ray 3D" and "Blu-ray 3D" logo are trademarks of
the Blu-ray Disc Association.
Safety Information
●
To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently, the
wall outlet and power plug must be readily accessible
at all times.
Do not allow children to hang on the product.
Store the accessories (battery, etc.) in a location safely
out of the reach of children.
Do not install the product in an unstable location such
as a shaky self, a slanted floor, or a location exposed
to vibration.
Do not drop or strike the product. If the product is
damaged, disconnect the power cord and contact a
service centre.
To clean this apparatus, unplug the power cord from
the wall outlet and wipe the product using a soft,
dry cloth. Do not use any chemicals such as wax,
benzene, alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals can damage
the appearance of the product or erase the printing
on the product.
Do not expose this apparatus to dripping or splashing.
Do not put objects filled with liquids, such as vases on
the apparatus.
Do not dispose of batteries in a fire.
Do not plug multiple electric devices into the same
wall socket. Overloading a socket can cause it to
overheat, resulting in a fire.
There is danger of an explosion if you replace the
batteries used in the remote with the wrong type of
battery. Replace only with the same or equivalent
type.
3 - English
HT-J5500_J5550W_XU-0302_ECO.indd 3
2015-04-02
1:56:06
Contents
GETTING STARTED
PLAYING CONTENT
5
Accessories
28 Switching the Source Device
5
Speaker Components
28 Playing Commercial Discs
6
Front Panel
28 Playing a Disc with User Recorded Content
7
Rear Panel
29 Playing Files on a USB Device
8
Remote Control
30 Controlling Video Playback
32 Playing a Pre-Recorded Commercial Audio Disc
CONNECTIONS
9
32 Controlling Music Playback
Connecting the Speakers
34 Playing Photo Content
13 Connecting to a TV and External Devices
34 Using Bluetooth
14 Connecting to a Network Router
36 Using the Special Effects Remote Control
Buttons
SETTINGS
15 The Initial Settings Procedure
NETWORK SERVICES
16 The Home Screen at a Glance
37 Using BD-LIVE™
16 Accessing the Settings Screen
37 Using DLNA
17 Settings Menu Functions
37 Apps
20 Radio Setup
38 Using Opera TV Store
22 Network Setup
39 Screen Mirroring
25 Wi-Fi Direct
APPENDIX
26 Upgrading Software
40 Additional Information
27 Setting Up DLNA
41 Disk and Format Compatibility
46 Troubleshooting
49 Specifications
51 Licences
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE : The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The
value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362
of the same rating must be used. Never use the plug with the fuse cover removed. If the cover is detachable and
a replacement is required, it must be of the same colour as the fuse fitted in the plug. Replacement covers are
available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not
long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your
dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then safely
dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared
flexible cord. Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be used at all
times.
IMPORTANT : The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL
BROWN = LIVE As these colours may not correspond to the coloured markings identifying the terminals in your
plug, proceed as follows:–The wire coloured BLUE must be connected to the terminal marked with the letter N or
coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L
or coloured BROWN or RED.
IMPORTANT : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER E OR
BY THE EARTH SYMBOL U, OR COLOURED GREEN OR GREEN AND YELLOW.
4 - English
HT-J5500_J5550W_XU-0302_ECO.indd 4
2015-04-02
1:56:07
Getting Started
■
■
Check the box for the accessories and speaker components listed or shown below.
Getting Started
■
Figures and illustrations in this User Manual are provided for reference only and may differ from actual
product appearance.
An administration fee may be charged if either
a. an engineer is called out at your request and there is no defect in the product (i.e. where you have
failed to read this user manual)
b. you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed
to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is carried
out.
Accessories
●
Remote Control
●
User Manual
Power Cable
●
Batteries (AAA size)
FM Antenna
Speaker Components
HT-J5500
Centre
Front x 2
Surround x 2
Speaker Cable x 6
Subwoofer
5 - English
HT-J5500_J5550W_XU-0302_ECO.indd 5
2015-04-02
1:56:07
Getting Started
HT-J5550W
Screw (5x15) x 4
Front x 2
Surround x 2
Stand x 4
Screw (5x20) x 16
Centre
Stand Base x 4
Subwoofer
Speaker Cable x 6
Wireless Receiver
Module (SWA-7000)
Front Panel
DISPLAY ICONS
FUNCTION
STOP
PLAY/PAUSE
OPEN/CLOSE
VOLUME
CONTROL
POWER
DISPLAY
5V 0.5A
DISC TRAY
✎
✎
✎
✎
REMOTE CONTROL SENSOR
USB
When the product is on, do not let children touch the product's surface. It will be hot.
To upgrade the product's software through the USB jack, you must use a USB flash drive.
When the product displays a Blu-ray Disc menu, you cannot start the movie by pressing the
/6
button on the product or the remote. To play the movie, you must select Play Movie or Start in the
disc menu, and then press the E button.
If you are using the Internet or are playing content from a USB device on your TV through the home
cinema, you cannot select the BD/DVD mode with the FUNCTION button. To select the BD/DVD mode,
exit the Internet or stop the content you are playing on the TV, and then select the BD/DVD mode.
6 - English
HT-J5500_J5550W_XU-0302_ECO.indd 6
2015-04-02
1:56:09
Rear Panel
* In case of HT-J5500
SURROUND
AUX IN
SURROUND
POWER CORD
SPEAKER OUTPUT
CONNECTORS
EXTERNAL DIGITAL
AUDIO IN (OPTICAL)
Getting Started
* FM ANTENNA
HDMI OUT
COOLING FAN
LAN TERMINAL
* Connecting the FM Antenna
1.
Connect the supplied FM antenna to the FM ANT Jack.
2.
Slowly move the antenna wire around until you find a location where reception is good, then fasten it to
a wall or other rigid surface.
✎
✎
Maintain a minimum of 10 cm of clear space on all sides of the home cinema to ensure adequate
ventilation.
Do not obstruct the cooling fan or ventilation holes.
This product does not receive AM broadcasts.
7 - English
HT-J5500_J5550W_XU-0302_ECO.indd 7
2015-04-02
1:56:12
Getting Started
Remote Control
Tour of the Remote Control
Turn the product on and off.
FUNCTION
Adjust the volume.
VOLUME
-
MUTE
+
RDS DISPLAY
Press numeric buttons to
operate options.
Press to view the disc menu.
TA
1
2
3
PTY -
PTY SEARCH
PTY +
4
5
6
7
8
9
TITLE MENU
DISC MENU
0
POPUP
Press to skip backwards or forwards.
Press to play a disc or files.
Press to stop a disc or files.
SUBTITLE
HOME
These buttons are used both for
menus on the product and also
several Blu-ray Disc functions.
Press to record FM radio broadcasts.
Cut off the sound temporarily.
Use the RDS function to
receive FM stations.
Use to enter the Popup
menu/Title menu.
Press to search backwards or
forwards.
Press to pause playing.
Allows you to repeat a title,
chapter, track or disc.
TOOLS
INFO
Use to display the playback
information when playing
a Blu-ray/DVD disc or files.
RETURN
EXIT
Press to exit the menu.
Press to use the Tools menu.
Select on-screen menu items
and change menu values.
Return to the previous menu.
To open and close the disc tray.
REPEAT
Selects the disc subtitle language.
Press to move to the Home screen.
Press to select Home Cinema's
mode. (BD/DVD, D. IN, AUX,
etc.).
TUNER
MEMORY MO/ST
A
B
TV SOUND DSP/EQ
C
D
TUNING
DOWN
Press to direct the audio signal to
the home cinema speakers or TV
speaker. (See page 36)
Use to set a preset radio frequency.
UP
Select MONO or STEREO for radio
broadcasts.
Search for active FM stations and
to change channels.
Select the desired DSP/EQ audio
mode.
Installing batteries in the Remote Control
✎
✎
✎
Make sure to match the "+" and "–" ends of the batteries
with the diagram inside the compartment.
Assuming typical usage, the batteries last for about one
year.
The remote control can be used up to approximately
7 meters from the product in a straight line.
Battery size: AAA
8 - English
HT-J5500_J5550W_XU-0302_ECO.indd 8
2015-04-02
1:56:12
Connections
This section describes various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Position of the product
Place it on a stand or cabinet
shelf, or under the TV stand.
Centre
Front (R)
Surround (R)
Product
Front (L)
Selecting the Listening Position
The listening position should be
located about 2.5 to 3 times the
TV's screen size away from the
TV. For example, if you have a 46
inch screen, locate the listening
position 2.92 to 3.50 meters
from the screen.
Connections
Subwoofer
Surround (L)
Wireless
Receiver Module
* The Wireless Receiver Module applies to HT-J5550W only.
Front Speakers
Place these speakers in front of your listening position, facing inwards (about
45°) toward you. Place the front speakers so that their tweeters will be at the
same height as your ear. Align the front face of the front speakers with the
front face of the centre speaker or place them slightly in front of the centre
speakers.
Centre Speaker
It is best to install the centre speaker at the same height as the front speakers.
You can also install it directly over or under the TV.
Surround Speakers
Place these speakers to the side of your listening position. If there isn't enough
room, place these speakers so they face each other. Position them about 60 to
90cm above your ear, facing slightly downward.
* Unlike the front and centre speakers, the surround speakers are used mainly
for sound effects. Sound will not come from them all the time.
Subwoofer
The position of the subwoofer is not so critical. Place it anywhere you like.
* Surround speakers must be connected to the wireless receiver module. (HT-J5550W only)
* The appearance of your speakers may differ from the illustrations in this manual.
* Each speaker has a coloured label on its back or underside. Each cable has a single coloured band near
its end. Match the band on each cable to the speaker label by colour, and then connect the cable to the
speaker. See page 10 for exact instructions.
9 - English
HT-J5500_J5550W_XU-0302_ECO.indd 9
2015-04-02
1:56:14
Connections
Installing the Speakers on the Tallboy Stand
* HT-J5550W only
1.
Turn the Stand Base upside-down and connect
it to the Stand.
2.
Use the driver to fasten the screws (5x20) on
the 4 marked holes.
1
Stand Base
2
Stand
3.
4.
Straighten the provided speaker cable and
run it through the centre hole of the Stand
Base. Pull the cable out from the hole of the
stand pole.
Connect the upper Speaker to the assembled
Stand.
3
4
Speaker
Stand
5.
Insert a screw (5x15) and fasten it clockwise
through the hole on the rear of the speaker
using a screwdriver.
6.
Arrange the speaker cable along the groove
on the rear side of the stand pole.
7.
Connect the arranged speaker cables to the
port on the speaker’s rear side while matching
their colours.
8.
This is the appearance after the speaker is
installed.
Follow this steps to install other speaker.
5
6
7
8
Or
Speaker Cable Connections
1.
Match each speaker cable bundle to the correct speaker by matching the coloured band on each bundle
to the coloured sticker on the bottom or back of each speaker.
2.
Connect the speaker wire plugs from each speaker to the back of the product by matching the coloured
band on each cable to the colours of the speaker jacks. When connecting, make sure to match label
colour on the back of speaker.
10 - English
HT-J5500_J5550W_XU-0302_ECO.indd 10
2015-04-02
1:56:15
HT-J5500
Front Speaker (L)
Surround
Speaker (L)
SURROUND
Surround
Speaker (R)
SURROUND
SURROUND
Subwoofer
SURROUND
Connections
Centre Speaker
Front Speaker (R)
HT-J5550W
Front
Speaker (L)
Centre Speaker
Wireless Receiver
Module
L
R
SURROUND SPEAKERS OUT
52'#-'4+/2'&#0%'š
Subwoofer
ID SET
Front Speaker (R)
Surround
Speaker (L)
Surround
Speaker (R)
* This product should be connected with the SWA-7000 only.
11 - English
HT-J5500_J5550W_XU-0302_ECO.indd 11
2015-04-02
1:56:18
Connections
✎
✎
✎
✎
✎
If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic
field.
Place the wireless receiver module at the rear of the listening position. If the wireless receiver module
is too close to the product, sound from the speakers may be disrupted because of interference.
If you use a device such as a microwave oven, wireless LAN Card, Bluetooth device, or any other
device near the product, sound from the speakers may be disrupted because of interference.
The maximum transmission distance from the product to the wireless receiver module is about 10m,
but may vary depending on your operating environment. If a steel-concrete wall or metallic wall is
between the product and the wireless receiver module, the system may not operate at all, because
the radio waves cannot penetrate metal.
If the product doesn't make a wireless connection, you need to run an ID Set between the product
and wireless receiver module. With the product turned off, press "0""1""3""5" on the remote
control. Turn on the wireless receiver module. Then, press and hold the "ID SET" button on the back
of the wireless receiver module for 5 seconds, and then turn the product on.
| CAUTION |
▶
If you want to install the speakers on the wall, fasten screws or nails (not provided) firmly to the wall
wherever you want to hang a speaker, and then, using the hole in the rear of each speaker, carefully
hang each speaker on a screw or nail.
▶
Do not let children play with or near the speakers. They could get hurt if a speaker falls.
▶
When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
▶
Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands
or alien substances into the duct (hole) of the subwoofer speaker.
▶
Do not hang the subwoofer on the wall by the duct (hole).
▶
The wireless receiving antenna is built into the wireless receiver module. Keep it away from water
and moisture.
▶
For optimal listening performance, make sure that the area around the wireless receiver module
location is clear of any obstructions.
▶
In 2-CH mode, you will hear no sound from the wireless surround speakers.
12 - English
HT-J5500_J5550W_XU-0302_ECO.indd 12
2015-04-02
1:56:19
Connecting to a TV and External Devices
Red
W
White
Method 1
External Devices
Connections
R
Method 2
AUDIO OUT
OPTICAL OUT
HDMI IN (ARC)
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV. If the TV supports ARC, you can hear the audio from your TV through the home cinema with
only this cable connected. See page 18 in this manual and the section on ARC in your TV's user's manual
for details.
Connecting to External Devices
Two methods of connecting external devices to your home cinema are explained below.
Method 1 AUX IN : Connecting an External Analogue Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on
the external analogue component.  Select the AUX mode.
● Be sure to match the colours on the cable plugs to the colours on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
Use to connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes) to the home cinema. Using a digital optical cable (not supplied), connect the Optical
Digital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digital
optical cable.  Select the D. IN mode.
✎
✎
✎
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
This system supports Digital sampling frequencies of 32 kHz or higher from external digital
components.
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not
supported.
Selecting an External Device to Use
To select an external device after you have connected it, press the FUNCTION button. Each time you press the
button, the mode changes in this order : BD/DVD D. IN AUX FM BT
13 - English
HT-J5500_J5550W_XU-0302_ECO.indd 13
2015-04-02
1:56:19
Connections
Wireless Network
Connecting to a Network Router
You can connect your product to your network
router using one of the methods illustrated below.
Wired Network
Wireless IP sharer
Broadband modem
(with integrated router)
Broadband
service
Broadband
service
Or
✎
Router
Broadband
service
✎
✎
Broadband
modem
✎
✎
✎
✎
✎
✎
Your router or your Internet Service Provider's
policies may prevent the product from
accessing Samsung's software update server.
If this occurs, contact your Internet Service
Provider (ISP) for more information.
DSL users, please use a router to make a
network connection.
Try to use the CAT 7 cable to connect.
You cannot use the product if the network
speed is slower than 10Mbps.
To use the DLNA function, you must connect
your PC to your network as shown in the
illustrations above.
The connection can be wired or wireless.
✎
✎
If your wireless IP router supports DHCP, this
product can use a DHCP or static IP address to
connect to the wireless network.
Set your wireless IP router to Infrastructure
mode. Ad-hoc mode is not supported.
The product supports only the following
wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
Select a channel on the wireless IP router that
is not currently being used. If the channel set
for the wireless IP router is currently being
used by another device nearby, it will result in
interference and communication failure.
In compliance with the newest Wi-Fi
certification specifications, Samsung home
cinemas do not support WEP, TKIP, or TKIPAES (WPS2 Mixed) security encryption in
networks running in the 802.11n mode.
Wireless LAN, by its nature, may cause
interference, depending on the operating
conditions (AP performance, distance,
obstacles, interference by other radio devices,
etc.).
14 - English
HT-J5500_J5550W_XU-0302_ECO.indd 14
2015-04-02
1:56:20
Settings
4:3 Pan-Scan - For older, standard screen,
analogue TVs. Displays 4:3 pictures in full screen
and 16:9 pictures in Pan-Scan format that fills
the screen, but cuts off the left and right sides
of the picture and enlarges the middle vertically.
The Initial Settings Procedure
●
●
●
The Home menu will not appear if you do not
configure the initial settings.
The OSD (On Screen Display) may change in
this product after you upgrade the software
version.
The access steps may differ depending on the
menu you selected.
Turn on your TV after connecting the product,
and then turn on the product. When you turn
on the product for the first time, the product
automatically displays the Setup Language
screen.
2.
Press the ▲▼ buttons to select the desired
language, and then press the E button.
3.
Press the E button to start function setup.
The Network screen appears.
- Before you begin, confirm that the product is
connected to your router.
- Set to wired or wireless depending on your
network environment.
- If your wireless network has a security code,
you will need to enter the code to complete
the network connection.
- If you have a network with static IP addresses,
we suggest you select Skip by pressing the
BLUE (D) button.
✎
If you skip network setup here or the setup
does not work correctly, you can set up the
product's network connection later. (See page
21)
Settings
1.
5.
Setup
Setup | Network
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Select your network type.
Network Type
Start
Wireless
㾎
Wired
Connect
Network cable connected.
a Previous
" Select
a Previous
4.
The TV Aspect Ratio screen appears. Press the
▲▼ buttons to select a TV aspect ratio, and
then press the E button.
You have four choices:
16:9 Original - For widescreen TVs. Displays
widescreen pictures in their original 16:9 format
and 4:3 pictures (the old, standard format) in
4:3 pillar box format with black bars on the left
and right.
16:9 Full - For widescreen TVs. Displays
widescreen pictures in their original 16:9 format
and expands 4:3 pictures to fill the 16:9 screen.
4:3 Letter Box - For older, standard screen,
analogue TVs. Displays 4:3 pictures in full
screen and 16:9 pictures in letter box format
that retains the 16:9 aspect ratio but puts black
bars above and below the picture.
d Skip
m Move
" Select
6.
The product verifies the network connection
and then connects to the network. When it is
done, press the E button. The "Initial settings
completed." screen appears, and then the
Home screen appears.
✎
If you want to display the Setup screen again
and make changes, select the Reset option.
(See page 20)
If you use an HDMI cable to connect the
product to an Anynet+ (HDMI-CEC)-compliant
Samsung TV and 1.) You have set the Anynet+
(HDMI-CEC) feature to On in both the TV
and the product and 2.) You have set the
TV to a language supported by the product,
the product will select that language as the
preferred language automatically.
✎
15 - English
HT-J5500_J5550W_XU-0302_ECO.indd 15
2015-04-02
1:56:22
Settings
The Home Screen at a Glance
1
7 Change Device
Displays a list of external devices connected to the
main unit. Switch to the desired device.
2
PLAY DISC
PHOTOS
VIDEOS
MUSIC
8 Function
Use for switching to an external device, and
for radio and mode switching for a Bluetooth
connection. You can use the remote control’s
FUNCTION button and the main unit’s
button
for mode switching.
No Disc
App 1
App 2
9 Settings
App 3
App 4 Opera TV More
Store
3
Screen Change Function Settings
Mirroring Device
45 6 7 8 9
Set various functions to suit your personal
preferences.
✎
1 PLAY DISC
The disc currently in the tray is displayed.
Press E to start playing the disc.
To play or view video, photo, or music files
located on your PC, you must connect your
home cinema and PC to a home network and
have DLNA software installed on your PC. See
page 27 and 37.
Accessing the Settings Screen
2 PHOTOS/VIDEOS/MUSIC
1.
Play photos, videos, or music content from a
Disc, USB, PC, or mobile device.
Select Settings on the Home screen, and then
press E. The Settings screen appears.
Settings
3 Apps
Access various for pay or free-of-charge
applications.
4 Opera TV Store
Access the on-line Opera TV Store where you
will find high-quality video streaming, music
streaming, gaming, and social network apps.
Picture
3D Settings
Sound
TV Aspect Ratio
: 16:9 Original
Network
BD Wise
: Off
System
Resolution
: Auto
Language
Movie Frame (24 fps)
: Off
Security
HDMI Colour Format
: Auto
General
HDMI Deep Colour
: Off
Support
Progressive Mode
: Auto
5 More
A list of useful and popular apps we recommend.
✎
2.
To access the menus, sub-menus, and options
on the Settings screen, please refer to the
remote control illustration. (See page 17)
✎
If you leave the product in the stop mode for
more than 5 minutes without using it, a screen
saver appears on your TV. If the product is left
in the screen saver mode for more than 20
minutes, the power automatically turns off.
Depending on your country, this menu
function may not be supported.
6 Screen Mirroring
Set up the wireless mirroring function between
the home cinema and a smart phone or tablet.
16 - English
HT-J5500_J5550W_XU-0302_ECO.indd 16
2015-04-02
1:56:23
Buttons on the Remote Control Used for
the Settings Menu
SUBTITLE
1
HOME
Picture
REPEAT
3D Settings
TOOLS
INFO
RETURN
EXIT
3
2
4
TUNER
HOME Button : Press to move to the Home
screen.
2
RETURN Button : Press to return to the
previous menu.
3
E (ENTER) / DIRECTION Button :
● Press ▲▼◀▶ to move the cursor or
select an item.
● Press the E button to activate the
currently selected item or confirm a
setting.
Set up the 3D related functions.
 3D Blu-ray Playback Mode: Select whether
to play a Blu-ray Disc with 3D contents in 3D
Mode. If you move to the Home menu while
in 3D mode, the product will switch to 2D
automatically.
 Screen Size: Enter the size of the TV attached to
the product. The product will automatically adjust
the 3D output to the screen size of the TV.
✎
Carefully read the health and safety information
before viewing 3D content. (See page 3)
Settings
1
4
Settings Menu Functions
TV Aspect Ratio
Lets you adjust the output of the product to the
screen size of your TV. (See page 40)
BD Wise
BD Wise is Samsung’s latest inter-connectivity
feature. When you connect a Samsung product
and a Samsung TV with BD Wise to each other
via HDMI, and BD Wise is on in both the product
and TV, the product outputs video at the video
resolution and frame rate of the Blu-ray/DVD Disc.
EXIT Button : Press to exit the current
menu.
Detailed Function Information
Each Settings function, menu item, and individual
option is explained in detail on-screen. To view an
explanation, use the ▲▼◀▶ buttons to select the
function, menu item, or option. The explanation will
usually appear on the bottom of the screen.
A short description of each Settings function starts
on this page. Additional information on some of the
functions is also in the Appendix of this manual.
Resolution
Lets you set the output resolution of the HDMI
video signal to BD Wise, Auto, 1080p, 1080i,
720p, 576p/480p. The number indicates the
number of lines of video per frame. The i and
p indicate interlaced and progressive scan,
respectively. The more lines, the higher quality.
Movie Frame (24 fps)
Setting the Movie Frame (24 fps) feature to
Auto lets the product adjust its HDMI output
to 24 frames per second automatically for
improved picture quality if attached to a 24 fps
compatible TV.
● You can enjoy the Movie Frame (24 fps)
feature only on a TV supporting this frame
rate.
● Movie Frame is only available when the
product is in the HDMI 1080p output
resolution modes.
17 - English
HT-J5500_J5550W_XU-0302_ECO.indd 17
2015-04-02
1:56:24
Settings
HDMI Colour Format
Audio Return Channel
Lets you set the colour space format for the HDMI
output to match the capabilities of the connected
device (TV, monitor, etc).
Lets you direct the sound from the TV to the
Home Cinema speakers. Requires an HDMI
connection and an Audio Return Channel (ARC)
compatible TV.
● If Audio Return Channel is set to on and you are
using an HDMI cable to connect the product to
the TV, digital optical input will not work.
● If Audio Return Channel is set to Auto and
you are using an HDMI cable to connect the
product to the TV, ARC or digital optical input is
selected automatically.
HDMI Deep Colour
Lets you set the product to output video from the
HDMI OUT jack with Deep Colour. Deep Colour
provides more accurate colour reproduction with
greater colour depth.
Progressive Mode
Lets you improve picture quality when viewing
DVDs.
Digital Output
Lets you set the Digital Output to match the
capabilities of the AV receiver you’ve connected to
the product. For more details, please refer to the
digital output selection table. (See page 45)
Sound
Speaker Settings
Lets you adjust the following speaker settings and
turn the speaker test on and off so you can test
the speakers.
 Level: Lets you adjust the relative loudness of
each speaker from 6dB to -6dB. For example,
if you like deep bass, you can increase the
loudness of the subwoofer by 6dB.
 Distance: Lets you adjust the relative distance
of each speaker from the listening position
up to 9 meters. The farther the distance, the
louder the speaker will be.
 Speaker Test: Lets you run the Speaker Test
function so you can test your adjustments. Setting
Speaker Test to On turns the Speaker Test on.
Setting it to Off turns it off.
Speaker Selection
Dynamic Range Control
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD audio.
 Auto: Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
dynamic range control off for Dolby Digital and
Dolby Digital Plus.
 Off: Leaves the dynamic range uncompressed,
letting you hear the original sound.
 On: Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder
and the volume of loud sounds is reduced.
Downmixing Mode
Lets you select which speakers you want active,
either the TV's speakers or the home cinema's
speakers.
Lets you select the multi-channel downmix method
that is compatible with your stereo system. You can
choose to have the product downmix to Normal
Stereo or to Surround Compatible.
Equaliser Mode
Audio Sync
Set Equaliser Mode on to use the Equaliser.
When the product is attached to a digital TV, lets
you adjust the audio delay so that the audio syncs
with the video. You can set the delay between 0
and 300 milliseconds.
Equaliser Settings
Lets you set the Equaliser.
✎
Equaliser Settings only appears when
Equaliser Mode is On.
18 - English
HT-J5500_J5550W_XU-0302_ECO.indd 18
2015-04-02
1:56:25
System
Network
Network Settings
Setup
Lets you configure the network connection so
you can enjoy various features such as Internet
services or DLNA Wi-Fi functionality, and
perform software upgrades.
Lets you re-run the Setup procedure. (See page
15)
Network Test
You can turn on the power quickly by decreasing
the boot time.
Lets you test the Internet Protocol setup to see
if it is working correctly.
Network Status
Lets you connect a Wi-Fi Direct device to the
product using a peer-to-peer network, without
the need for a wireless router.
Note that if the product is connected to a
wireless network, it may be disconnected when
you use Wi-Fi Direct. (See page 25)
Text files, such as files with a .TXT or .DOC
extension, will not display when you are
using the Wi-Fi Direct function.
Screen Mirroring
The Screen Mirroring function lets you view
the screen of your smart phone or smart device
on the TV you have connected to the home
cinema system. (See page 39)
Lets you assign an identifying name to the
product. You use this name to identify the
product when you are connecting external WiFi devices (smart phones, tablets, etc.) to it.
Lets you allow or prohibit an Internet
connection for the BD-Live service.
Anynet+ is a convenient function that offers
linked operations with other Samsung products
that have the Anynet+ feature and lets you
control those products with one Samsung TV
remote. To operate this function, you must
connect this product to an Anynet+ Samsung TV
using an HDMI cable.
BD Data Management
Lets you manage the contents you downloaded
through a Blu-ray disc that supports the BD-Live
service. You can view information about the USB
device you are using for BD Live data storage
including the available storage space. You can
also delete BD Live data and change the device.
DivX
Video On Demand
View DivX VOD Registration Codes to purchase
and play DivX VOD contents.
Device Name
BD-Live Internet Connection
If this function is set to On, Standby power
consumption will be increased. (About 12W
~ 20W)
Anynet+ (HDMI-CEC)
Wi-Fi Direct
✎
✎
Settings
Lets you check the current network and
Internet status.
Quick start
Language
Lets you select the language you prefer for the
On-Screen Menu, Disc Menu, etc.
● The selected language will only appear if it is
supported on the disc.
19 - English
HT-J5500_J5550W_XU-0302_ECO.indd 19
2015-04-02
1:56:26
Settings
Radio Setup
Security
The default PIN is 0000. Enter the default PIN to
access the security function if you haven't created
your own PIN.
BD Parental Rating
Prevents playback of Blu-ray Discs with a rating
equal to or above a specific age rating unless you
enter the PIN.
DVD Parental Rating
●
Operating the Radio with the Remote
Control
1.
Press the FUNCTION button to select FM.
2.
Tune to the desired station.
● Preset Tuning 1 : Press the 5 button to
select PRESET, and then press the TUNING
UP, DOWN button to select a preset station.
- Before you can tune to preset stations, you
must add preset stations to the product's
memory.
● Manual Tuning : Press the 5 button to select
MANUAL, and then press the TUNING UP,
DOWN button to tune in to a lower or higher
frequency.
● Automatic Tuning : Press the 5 button to
select MANUAL, and then press and hold the
TUNING UP, DOWN button for a few seconds
to automatically search the band.
Prevents playback of DVDs with a rating above a
specific numerical rating unless you enter the PIN.
Change PIN
Changes the 4-digit PIN used to access security
functions.
General
Time Zone
Lets you specify the time zone that is applicable to
your area.
Support
To listen to the radio, you must connect the
supplied FM antenna.
Selecting Mono or Stereo
Press the MO/ST button.
● Each time you press the button, the sound
switches between STEREO and MONO.
● In a poor reception area, select MONO for a clear,
interference-free broadcast.
Software Upgrade
For more information about this function, see
page 26.
Contact Samsung
Provides contact information for assistance with
your product.
Presetting Stations
Terms of Service Agreement
1.
Press the FUNCTION button to select FM.
2.
Press the TUNING UP, DOWN button to scroll
the FM frequencies, and then select <89.10>.
3.
Press the TUNER MEMORY button (the yellow
C button at the bottom of the remote).
Press the TUNER MEMORY button again
within about 5 seconds. The station is stored in
memory.
View the general disclaimer regarding third party
contents and services.
Example : Presetting FM 89.10 into memory.
Reset
Reverts all settings to their defaults except for the
network. Requires that you enter your security
PIN. The default security PIN is 0000.
4.
✎
If you press the TUNER MEMORY button
repeatedly without changing the station, the
inputted station may be overwritten.
5. To preset another station, repeat steps 2 to 4.
20 - English
HT-J5500_J5550W_XU-0302_ECO.indd 20
2015-04-02
1:56:26
●
✎
To tune in to a preset station, press the
TUNING UP, DOWN button.
About RDS Broadcasting
To delete all Preset FM stations at once, press
the TITLE MENU button for about 5 seconds
in FM Manual mode until DEFAULT PRESET
appears on the display.
Recording FM Radio
You can record your favourite radio broadcast on a
USB storage device.
Insert a USB device into the USB jack on the
front of the product.
2.
Press the FUNCTION button to select FM, and
then press the TUNING UP, DOWN button to
select the station you want to record.
3.
Press the RED (A) button to start recording. The
recording process begins.
● The recorded time is displayed on the left and
the recording time still available, based on
the amount of free space in the USB storage
device, is displayed on the right.
4.
Press the EXIT button to finish your recording.
The recording is stopped and saved as an .mp3
file at the same time. To play the recorded file,
refer to "Playing Files on a USB Device".
✎
The recorded file is saved in the Tuner folder
which is created automatically.
✎
Only the
(OPEN/CLOSE),
(POWER), EXIT,
MUTE, and VOLUME +/-, buttons are operable
while FM radio is being recorded.
If you don't press any buttons while recording,
the screen saver will be enabled.
Sound effects, such as DSP, EQ, etc., are not
recorded during FM radio recording.
The radio is recorded at a set, default volume
even if you change the volume or press the
MUTE button during the recording process.
If you remove the USB device or Power Cable
during the recording process, the portion of
the file which has already been recorded may
not play back.
Recording will not start if the remaining free
space in the USB storage device is less than
2MB.
If the USB device is removed or has insufficient
space (under 2MB), the appropriate message
is displayed and the recording stops.
✎
✎
✎
✎
✎
✎
FM stations
RDS allows FM stations to send an additional signal
along with their regular program signals.
For example, the stations send their station names,
as well as information about what type of program
they broadcast, such as sports or music, etc.
When tuned to an FM station which provides the
RDS service, the RDS indicator lights up on the
display.
Description on RDS function
●
●
●
●
●
PTY (Program Type) : Displays the type of program
currently being broadcast.
PS NAME (Program Service Name) : Indicates the
name of broadcasting station and is composed of
8 characters.
RT (Radio Text) : Decodes the text broadcast by a
station (if any) and is composed of maximum 64
characters.
CT (Clock Time) : Decodes the real time clock from
the FM frequency. Some stations may not transmit
PTY, RT or CT information therefore this may not
be displayed in all cases.
TA (Traffic Announcement) : TA ON/OFF it shows
that the traffic announcement is in progress.
✎
Settings
1.
Using the RDS (Radio Data System) to receive
RDS may not operate correctly if the station
tuned is not transmitting RDS signal properly
or if the signal strength is weak.
21 - English
HT-J5500_J5550W_XU-0302_ECO.indd 21
2015-04-02
1:56:27
Settings
- When pressing the buttons on the primary
remote control, make sure that you have
selected the FM station using the primary
remote control.
To show the RDS signals
You can see the RDS signals the station sends on the
display.
Press the RDS DISPLAY button while listening to an
FM station.
● Each time you press the button, the display
change to show you the following information :
PS NAME  RT  CT  Frequency
PS (Program
Service)
While searching, <PS NAME>
appears and then the station
names will be displayed.
<NO PS> appears if no signal is
sent.
RT (RadioText)
While searching, <RT> appears
and then text messages the
station sends will be displayed.
<NO RT> appears if no signal is
sent.
Frequency
Station frequency (non-RDS
service)
+
RDS DISPLAY
TA
1
2
3
PTY -
PTY SEARCH
PTY +
4
5
6
1.
Press the PTY SEARCH button while listening to
an FM station.
2.
Press the PTY- or PTY+ button until the PTY
code you want appears on the display.
● The display gives you the PTY codes described
to the right.
3.
Press the PTY SEARCH button again, while the
PTY code selected in the previous step is still on
the display.
● The centre unit searches 15 preset FM
stations, stops when it finds the one you
have selected, and tunes in that station.
About characters shown in the display
When the display shows PS,or RT signals,the
following characters are used.
● The display window cannot differentiate upper
case and lower case letters and always uses upper
case letters.
● The display window cannot show accented letters,
<A,> for instance, may stands for accented <A’s>
like < , , Ä, , Å and Ã.>
Network Setup
When you connect this product to a network, you
can use network based applications and functions
such as BD-LIVE and upgrade the product's software
through the network connection.
Configuring Your Network Connection
PTY (Program Type) indication and
To begin configuring your network connection,
follow these steps:
PTY-SEARCH function
1.
One of the advantages of the RDS service is that
you can locate a particular kind of program from the
preset channels by specifying the PTY codes.
In the Home screen, select Settings, and then
press the E button.
2.
Select Network, and then press the E button.
3.
Select Network Settings, and then press the E
button.
4.
Go to the instructions for Wired networks
starting below or the instructions for Wireless
networks on the right of next page.
To search for a program using the PTY codes
●
Before you start!
- The PTY Search is only applicable to preset
stations.
- To stop searching any time during the process,
press 5 button while searching.
- There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
22 - English
HT-J5500_J5550W_XU-0302_ECO.indd 22
2015-04-02
1:56:28
Wired Network
Select a parameter to enter (IP Address, for
example), and then press E. Use the number
keypad on your remote control to enter the
numbers for the parameter. You can also enter
numbers using the ▲▼ buttons. Use the ◀▶
buttons on the remote control to move from
entry field to entry field within a parameter.
When done with one parameter, press the E
button.
5.
Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 4.
6.
Repeat Steps 4 and 5 until you have filled in all
parameters.
Wired – Automatic
After following Steps 1 to 3 above:
1.
In the Network Settings screen, change
Network Type to Wired. Then, select Connect
and press the E button. The product detects
the wired connection, verifies the network
connection, and then connects to the network.
2.
When it is done, highlight OK, and then press
E button.
Wired - Manual
If you have a static IP address or the automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After following Steps 1 to 3 above:
1.
✎
✎
7.
In the Network Settings screen, change
Network Type to Wired. Then, select Connect
and press the E button.
The product searches for a network, and then
displays the connection failed message.
If it is possible to connect the home cinema
to your network wirelessly, select Change
Network at this point, change the Network
Type to Wireless, and then go to the
instructions for wireless networks on this
page.
Network Settings
Wired network connection failed.
MAC Address
IP Address
Subnet Mask
Gateway
DNS Server
XX:XX:XX:XX:XX:XX
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
Wireless Network
You can set up a wireless network connection in
three ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
Before you configure the wireless network
connection, disconnect any wireless network devices
currently connected to the product or, if applicable,
the product's current wired connection.
1.
IP Settings
a Previous
Retry
d Skip
Close
< Move
When finished entering all the parameter
values, select Return ('), and then press the
E button. The home cinema verifies the
network connection and then connects to the
network.
Wireless - Automatic
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 22)
Unable to connect to the network. Try the following: check if your IP address is set
correctly in IP Settings. Contact your Internet service provider for more information.
Change Network
You can get the network parameter values
from your Internet provider.
Settings
4.
" Select
2.
Use the ◀▶ buttons to select IP Settings, and
then press the E button. The IP Settings
screen appears.
3.
Select the IP setting field, and then set it to
Enter manually.
In the Network Settings screen, change
Network Type to Wireless. The product searches
for and then displays a list of the available
networks.
23 - English
HT-J5500_J5550W_XU-0302_ECO.indd 23
2015-04-02
1:56:29
Settings
4.
Network Settings
Select your network type.
Network Type
Wireless
Wireless network
㾎 si-ap
You can connect your BD
Home Theater to the
internet. Please select which
wireless network to use.
MIC
KIMING_VTOWER
WPS(PBC)
Search
Enter your wireless network or wireless router's
name.
● Enter numbers directly using the number
buttons on your remote control.
● Enter letters by selecting a letter with the
▲▼◀▶ buttons, and then pressing the E
button.
● To display capital letters (or redisplay lower
case letters if capital letters are displayed),
, and then press the E button.
select
To display symbols and punctuation, select
123#&, and then press the E button. To
redisplay letters, select 123#&, and then press
the E button.
When finished, select Done, and then press the
E button.
On the Security method screen that appears,
use the ▲▼ buttons to select the network's
Security method, and then press the E button.
On the next screen, enter your network's
security code or pass phrase.
● Enter numbers directly using the number
buttons on your remote control.
● Enter letters by selecting a letter with the
▲▼◀▶ buttons, and then pressing the E
button.
When finished, select Done, and then press
the E button. The product searches for the
network.
●
m Move
" Select
' Return
2.
Select the desired network, and then press the
E button.
3.
On the Security Key screen, enter your
network's security code or pass phrase.
Enter numbers directly using the number
buttons on your remote control. Enter letters
by selecting a letter with ▲▼◀▶ buttons, and
then pressing E button.
4.
When finished, select Done, and then press the
E button. The product verifies the network
connection and then connects to the network.
✎
You should be able to find the security code or
pass phrase on one of the set up screens you
used to set up your router or modem.
5.
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 22)
1.
In the Network Settings screen, change
Network Type to Wireless. The product searches
for and then displays a list of the available
networks.
2.
Scroll through the list, select the desired
network or Add Network, and then press the
E button.
3.
If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
6.
The Network connection fail screen appears.
Use ◀▶ buttons to select IP Settings, and then
press the E button.
7.
Select the IP setting field, and then set it to
Enter manually.
8.
Select a network parameter to enter (IP
Address, for example), and then press E
button. Use the number keypad on your remote
control to enter the numbers for the parameter.
You can also enter numbers using the ▲▼
buttons. Use the ◀▶ buttons on the remote
control to move from entry field to entry field
within a parameter. When done with one value,
press the E button.
9.
Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 8.
10. Repeat Steps 8 and 9 until you have filled in all
parameters.
24 - English
HT-J5500_J5550W_XU-0302_ECO.indd 24
2015-04-02
1:56:30
✎
You can get the Network parameter values
from your Internet provider.
Wi-Fi Direct
11. When finished, select Return ('), and then
press the E button. The Security Key screen
appears.
The Wi-Fi Direct function allows you to connect WiFi Direct devices to the product and each other using
a peer-to-peer network, without a wireless router.
12. On the Security Key screen, enter your
network's Security Code or Pass Phrase. Enter
numbers directly using the number buttons on
your remote control. Enter letters by selecting
a letter with the ▲▼◀▶ buttons, and then
pressing the E button.
✎
14. After the home cinema verifies the network,
select OK, and then press the E button.
✎
You can also begin the Manual Network setup
by going to Settings > Network > Network
Status.
WPS(PBC)
2.
In the Home screen, select Settings, and then
press the E button.
3.
Select Network, and then press the E button.
4.
Select Wi-Fi Direct, and then press the E
button.
The Wi-Fi Direct devices that you can connect
to appear.
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC) function.
If your wireless router has a WPS(PBC) button,
follow these steps:
Follow the Steps 1 to 3 in "Configuring Your
Network Connection". (See page 22)
1.
Scroll the list down, select WPS(PBC), and then
press the E button.
3.
Press the WPS(PBC) button on your router
within two minutes. Your product automatically
acquires all the network settings values it
needs and connects to your network after the
network connection is verified.
4.
✎
Settings
Picture
Select your Wi-Fi Direct device to connect to.
Network
AndroidXXXXXXX
System
Not Connected
Language
Security
Refresh
Close
General
Support
5.
When it is done, highlight OK, and then press
the E button.
For a WPS connection, set your wireless
router’s security encryption to AES. WEP
security encryption does not support a WPS
connection.
Wi-Fi Direct
Device Name : [HTS]J5550W
Sound
In the Network Settings screen, change
Network Type to Wireless. The product searches
for and then displays a list of the available
networks.
2.
Settings
13. When finished, select Done at the right of the
screen, and then press the E button. The
product verifies the network connection and
then connects to the network.
Some Wi-Fi Direct devices may not support
the DLNA function if connected via Wi-Fi
Direct. If this is the case, change the network
connection method you used to connect the
device to the home cinema.
✎ Wi-Fi Direct transmissions can interfere
with Bluetooth signals. Before you use the
Bluetooth function, we strongly recommend
that you turn off the Wi-Fi Direct function on
any device in which it is currently on.
1. Turn on the Wi-Fi Direct device and activate its
Wi-Fi Direct function.
You have three ways to complete the Wi-Fi
connection:
● Through the Wi-Fi device.
● Through the product using PBC.
● Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1.
On the Wi-Fi device, follow the device's
procedure for connecting to another Wi-Fi
Direct device. See the device's user manual for
instructions.
25 - English
HT-J5500_J5550W_XU-0302_ECO.indd 25
2015-04-02
1:56:31
Settings
2.
3.
●
When you have completed the procedure, you
should see a pop-up on your TV screen saying
that a device that supports Wi-Fi Direct has
requested to connect. Confirm that the device
that is making the request is your device, select
Yes in the pop up, and then press the E
button to accept.
The Connecting pop-up appears, followed by
the Connected pop-up. You should see the
device listed as connected on the Wi-Fi Direct
screen, and then press the E button.
The PBC and PIN procedures connect devices
automatically.
Upgrading Software
The Software Upgrade menu allows you to
upgrade the product’s software for performance
improvements or additional services.
●
●
●
Through the Product Using PBC
1.
2.
Select the Wi-Fi Direct device you want to
connect to this product, and then press the E
button.
The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed as connected on
the Wi-Fi Direct screen.
Through the Product Using a PIN
1.
Select the Wi-Fi Direct device you want to
connect to this product, and then press the E
button.
2.
The PIN pop-up appears.
3.
Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
4.
The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed as connected on
the Wi-Fi Direct screen.
✎
✎
The current wired or wireless network
connection will be disconnected when you use
the Wi-Fi Direct function.
Text files, such as files with a .TXT or .DOC
extension, will not display when you are using
the Wi-Fi Direct function.
Never turn the product off or back on manually
during the update process.
The update is complete when the product turns
off after restarting. Press the POWER button to
turn on the updated product for your use.
Samsung Electronics takes no legal
responsibility for product malfunction
caused by an unstable Internet connection
or consumer negligence during a software
upgrade.
1.
In the Home menu, select Settings, and then
press the E button.
2.
Select Support, and then press the E button.
3.
Select Software Upgrade, and then press the
E button.
4.
Select one of the following methods:
● By Online
● By USB
● Auto Upgrade Notification
5.
Press the E button.
Directions for each method begin below.
✎
If you want to cancel the upgrade while the
upgrade software is downloading, press the
E button.
By Online
Your product must be connected to the Internet to
use the By Online function. Remove all discs before
you begin.
1.
Select By Online, and then press the E button.
The Connecting to Server message appears.
2.
If an update is available, a popup message
appears asking if you want to upgrade. If you
select Yes, the product turns off automatically,
turns on, and then begins the upgrade.
3.
The update progress popup appears. When
the update is completed, the product turns off
automatically again.
4.
Press the POWER button to turn on the
product.
26 - English
HT-J5500_J5550W_XU-0302_ECO.indd 26
2015-04-02
1:56:32
By USB
1.
Setting Up DLNA
Visit Samsung's website on a computer and
download the update package to a USB device.
✎
Save the update package in the USB device's
top-level folder. Otherwise, the product will
not be able to locate the update package.
2. Connect the USB device with the update
package to the product.
Select Support > Software Upgrade > By USB.
The software is updated using the update
package on the USB device.
✎
There should be no disc in the product when
you upgrade the software using the USB Host
jack.
When the software upgrade is done, check
the software details in the Software Upgrade
menu.
✎
✎
PCs running Windows 7 and Windows 8 have
DLNA software (Play To) built in.
Settings
3.
DLNA lets you play music, video, and photo files
stored in your PC through your home cinema.
To use DLNA, you must install DLNA software or
already have DLNA software installed on your PC
and connect the home cinema to your PC via your
network (See page 14).
Auto Upgrade Notification
If your product is connected to the network and you
set Auto Upgrade Notification on, the product will
notify you if a new software version is available with
a pop-up message.
1.
Turn on the product.
2.
In the Software Upgrade menu, set Auto
Upgrade Notification to On.
If there is a new software version available, the
product will notify you with a pop-up message.
3.
To upgrade the firmware, select Yes. The
product turns off automatically, turns on, and
then begins the upgrade.
4.
The update progress popup will appear. When
the update is complete, the product will turn
off automatically again.
5.
Press the POWER button to turn on the
product.
27 - English
HT-J5500_J5550W_XU-0302_ECO.indd 27
2015-04-02
1:56:32
Playing Content
Your home cinema can play content located on
Blu-ray/DVD/CD discs, USB devices, PCs, smart
phones, tablets, and in Apps.
To play content located on your PC or a mobile
device, you must connect the PC or mobile device
and the product to your network. To play content on
your PC, you must also download and install DLNA
network software or already have DLNA network
software on your PC.
✎
3.
Press the  button to close the disc tray.
Playback starts automatically.
4.
If playback does not start automatically, press
the 6 button on the remote.
Disc Storage & Management
Holding Discs
- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
- Avoid touching the surface of a disc where data
has been recorded.
- Hold the disc by the edges so that fingerprints
will not get on the surface.
- Do not stick paper or tape on the disc.
Cleaning Discs
- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
- When cleaning, wipe gently from
the inside to the outside of the disc.
- Disc Storage
 Do not keep in direct sunlight.
 Keep in a cool ventilated area.
 Keep in a clean protective jacket and store
vertically.
●
PCs running Windows 7 and Windows 8 have
DLNA software (Play To) built in.
Switching the Source Device
If two or more external devices are connected to the
main unit, you can use any of the three methods
described below to change the source device.
●
Method 1
From the Home screen, use the ▲▼◀▶ buttons to
move to Change Device, and then press E.
The Change Device popup window will appear. Use
the ▲▼ buttons to move to the desired device, and
then press E.
Method 2
If you move to PHOTOS, VIDEOS, MUSIC or other
file-based contents, a list of folders and files will
appear. Press the RED (A) button to display the
Change Device popup window, use the ▲▼ buttons
to move to the desired device, and then press E.
Method 3
When a device is connected for the first time, a
popup window appears. In the popup, you can
change the source device by using the ◀▶ buttons,
and then pressing E.
Playing a Disc with User Recorded
Content
You can play multimedia files you have recorded on
Blu-ray, DVD, or CD discs.
1.
Playing Commercial Discs
Place a user recorded disc into the disc tray with
the disc’s label facing up, and then close the
tray.
2.
1.
Press the  button to open the disc tray.
2.
Place a disc gently into the disc tray with the
disc’s label facing up.
Use the ▲▼◀▶ buttons to select the type of
content you want to view or play - PHOTOS,
VIDEOS, or MUSIC - and then press the E
button.
OR
2-1. Select PLAY DISC from the Home screen. The
PLAY DISC screen appears. Use the ▲▼ buttons
to select the desired content type, Photos,
Videos, or Music.
28 - English
HT-J5500_J5550W_XU-0302_ECO.indd 28
2015-04-02
1:56:33
3.
A screen appears listing the contents of the
disc. Depending on how the contents are
arranged, you will see either folders, individual
files, or both.
3.
4.
If necessary, use the ▲▼◀▶ buttons to select
a folder, and then press the E button.
5.
5.
Use the ▲▼◀▶ buttons to select a file to view
or play, and then press the E button.
6.
6.
Press the RETURN button one or more times to
exit a current screen, exit a folder, or to return
to the Home screen.
Press the EXIT button to return directly to the
Home Screen.
7.
Go to pages 30~34 for instructions that
explain how to control playback of videos,
music, and pictures on a disc.
Method 1 : If you connect a USB device while
the product is turned on
The "New device connected." pop-up appears.
PLAY DISC
PHOTOS
VIDEOS
MUSIC
New device connected.
STORAGE DEVICE
Photos
Videos
No Disc
App 2
1.
Turn the product on.
2.
Press Change Device and select a USB device.
3.
Use the ◀▶ buttons to select PHOTOS,
VIDEOS, or MUSIC on the Home screen, and
then press the E button.
If necessary, use the ▲▼◀▶ buttons to select
a folder, and then press the E button.
5. Select a file to view or play, and then press the
E button.
6. Press the RETURN button to exit a folder or the
EXIT button to return to the Home screen.
7. Go to pages 30~34 for instructions that
explain how to control playback of videos,
music, and pictures on a USB device.
✎ If you insert a disc while playing a USB device
or phone, the device mode changes to "Disc"
automatically.
✎ If your cellular phone is DLNA compatible,
you can play content on the phone without
connecting a USB cable. (See page 37)
Music
> Move
App 1
you connect a USB device
4.
There are two methods you can use to play or view
multimedia files located on a USB device through
your product.
1.
Method 2 : If the product is turned on after
Playing Content
Playing Files on a USB Device
4.
If necessary, use the ▲▼◀▶ buttons to select
a folder, and then press the E button.
Select a file to view or play, and then press the
E button.
Press the RETURN button to exit a folder or the
EXIT button to return to the Home screen.
Go to pages 30~34 for instructions that
explain how to control playback of videos,
music, and pictures on a USB device.
App 3
" Enter
App 4 Opera TV More
Store
' Return
Screen Change Function Settings
Mirroring Device
✎
If the pop-up does not appear, go to Method
2.
2. Use the ▲▼ buttons to select Photos, Videos,
or Music and then press the E button.
Depending on how the contents are arranged,
you will see either folders, individual files, or
both.
29 - English
HT-J5500_J5550W_XU-0302_ECO.indd 29
2015-04-02
1:56:33
Playing Content
Controlling Video Playback
You can control the playback of video content
located on a Blu-ray/DVD disc, USB device, mobile
device, or PC. Depending on the disc or contents,
some of the functions described in this manual may
not be available.
Buttons on the Remote Control used for
Video Playback
TITLE MENU
DISC MENU
0
POPUP
2
1
2 Using the disc menu, title menu, popup
menu, and title list
DISC MENU
During playback, press this button to display the
Disc menu.
TITLE MENU
During playback, press this button to display the
Title menu.
● If your disc has a playlist, press the GREEN (B)
button to go to the playlist.
POPUP MENU
SUBTITLE
HOME
During playback, press this button to display the
Popup menu.
REPEAT
3
3 Repeat Playback
1 Playback related buttons
The product does not play sound in Search, Slow,
or Step mode.
● To return to normal speed playback, press the
6 button.
6
1.
During playback, press the REPEAT button
on the remote control.
2.
Press the ▲▼ buttons to select Off, Title,
Chapter, All or Repeat A-B, and then press
the E button.
Starts playback.
Repeat A-B
1.
Press the E button at the point where you
want repeat play to start (A).
5
Stops playback.
7
Pauses playback.
2.
Press the E button at the point where you
want repeat play to stop (B).
During playback, press the 3 or
button.
Each time you press the 3 or button, the playback speed will
change.
3.
To return to normal play, press the REPEAT
button again.
Slow
Motion Play
In pause mode, press the button.
Each time you press the button,
the playback speed will change.
✎
Step Motion
Play
In pause mode, press the 7
button.
Each time you press the 7 button,
a new frame appears.
✎
Skip Motion
Play
During playback, press the 1 or
2 button.
Each time you press the 1 or
2 button, the disc moves to the
previous or next chapter or file.
Fast Motion
Play
4.
✎
✎
✎
Press the E button.
Depending on the disc, the screen may not
display all repeat options.
The screen may not display Chapter or
Title immediately. Continue to press the
▲▼ buttons until your choice is inside the
applicable field.
To return to normal play, press the REPEAT
button again, press the ▲▼ buttons to
select Off, and then press the E button.
The screen may not display Repeat A-B
immediately. Continue to press the ▲▼
buttons until Repeat A-B is inside the
applicable field.
You must set point (B) at least 5 seconds of
playing time after point (A).
30 - English
HT-J5500_J5550W_XU-0302_ECO.indd 30
2015-04-02
1:56:34
Using the TOOLS Menu
Menu selections that appear only when a
During playback, press the TOOLS button.
BD/DVD disc plays
Title
Chapter
If there is more than one title on a disk or device,
lets you move to or select a desired title.
Lets you move to a chapter that you want to
watch.
✎
Audio
When searching DVD title, in stop mode,
enter the TOOLS button and title number
(01,02,...) you want.
Lets you set the desired audio language.
Playing Time
Subtitle
Lets you go to a specific playback point. Use the
numeric buttons to input the playback point.
Lets you set the desired subtitle language.
Angle
Repeat Mode
To view a scene from another angle. The Angle
option displays the number of angles available to
view (1/1, 1/2, 1/3, etc.).
Audio Sync
BONUSVIEW Video
Lets you adjust the audio delay so that the audio
syncs with the video. You can set the delay from
0 to 300 milliseconds.
Lets you set the desired Bonusview option.
Equaliser Mode
Menu selections that appear only while a file
plays
Set Equaliser Mode on to use the Equaliser.
Full Screen
Equaliser Settings
Lets you set the desired full screen size. You
can select Original, Mode1 (larger), and Mode2
(largest).
Lets you set the Equaliser.
✎
BONUSVIEW Audio
Playing Content
Lets you repeat a specific title, chapter, or marked
section.
Equaliser Settings only appears when
Equaliser Mode is On.
Information
Picture Settings
Select to view video file information.
Lets you set the picture mode.
■ Mode
- User : Go to Advanced Settings, and then
press the E button. Lets you adjust the
Brightness, Contrast, Colour, and Sharpness
functions manually.
- Dynamic : Choose this setting to increase
sharpness.
- Normal : Choose this setting for most viewing
applications.
✎
Depending on the disc or storage device, the
Tools menu may differ. All options may not be
displayed.
- Movie : This is the best setting for watching
movies.
31 - English
HT-J5500_J5550W_XU-0302_ECO.indd 31
2015-04-02
1:56:35
Playing Content
Creating a Video Playlist
You can create a playlist of video files in nearly the
same way you create a playlist of music files. See
page 33 for instructions. Select video files instead
of music files.
Buttons on the Remote Control used for
Music Playback
RDS DISPLAY
1
Playing a Pre-Recorded Commercial
Audio Disc
1.
Insert an Audio CD (CD-DA) or an MP3 Disc
into the disc tray.
● For an Audio CD (CD-DA), the first track will
be played automatically. Tracks on a disc
are played in the order in which they were
recorded on the disc.
● For an MP3 disc, press the ◀▶ buttons to
select MUSIC, then press the E button.
Pl li
Playlist
TRACK 001
Repeat Mode
Track
Equaliser Mode
Off
Rip
> Move
00:00/00:00
CD
2.
✎
< Adjust
' Return
TRACK 004
04:02
TRACK 005
03:43
TRACK 006
03:40
" Pause
Select
Tools
2
3
PTY SEARCH
PTY +
4
5
6
7
8
9
TITLE MENU
DISC MENU
0
POPUP
4
2
5
6
3
1
Number buttons : During Playlist playback,
press the desired track number. The
selected track is played.
2
Skip : During playback, press the 1 or 2
button to move to the previous or next
music track.
3
5 button : Stops a track.
4
Fast Play (Audio CD [CD-DA] only) :
During playback, press the 3 or button.
Each time you press the 3 or button,
the playback speed will change.
5
7 button : Pauses a track.
6
6 button : Plays the currently selected
track.
0/16
Tools
TA
1
PTY -
' Return
To play a particular track, use the ▲▼ buttons
on the remote to select the track, and then
press the E button.
For more information about playing music, see
Controlling Music Playback below.
Controlling Music Playback
You can control the playback of music content
located on a DVD, CD, USB, mobile device, or PC.
Depending on the disc or contents, some of the
functions described in this manual may not be
available.
Repeating Tracks
You can set the product to repeat tracks.
1.
During music playback, press the TOOLS
button.
2.
Select Repeat Mode, then use the ◀▶ buttons
to select Off, Track or One, All or Shuffle, and
then press the E button.
32 - English
HT-J5500_J5550W_XU-0302_ECO.indd 32
2015-04-02
1:56:36
Ripping
1.
If you are playing music from a commercial CD
or DVD, press the 5 or RETURN button. The
Music List Screen appears. If you are creating
a playlist from music on a user created disk or
USB device, access the Music list as described
on page 28 or 29.
1.
Insert a USB device into the USB jack on the
front of the product.
2.
With the Playback screen displayed, use the
▲▼ buttons to select a track, and then press
the YELLOW (C) button. A check appears to the
left of the track.
Press the ▲▼◀▶ buttons to move to a desired
file, and then press the YELLOW (C) button
to select it. Repeat this procedure to select
additional files.
3.
Repeat Step 2 to select and check additional
tracks.
4.
To remove a track from the list, move to the
track, and then press the YELLOW (C) button
again. The check on the track is removed.
5.
When done, press the TOOLS button.
The Tools menu appears.
6.
Use the ▲▼ buttons to select Rip, and then
press the E button. The Rip screen appears.
7.
Use the ▲▼ buttons to select the device to
store the ripped files on, and then press the E
button.
2.
3.
If you want to select all files, press the TOOLS
button, use the ▲▼ buttons to select Select All,
and then press E. If you want to deselect all
files, press the TOOLS button, select Deselect
All, and then press E.
MUSIC
㾎
CD
TRACK 001
1 file selected
TRACK 001
TRACK 002
05:57
04:27
TRACK 003
TRACK 004
04:07
03:41
TRACK 005
TRACK 006
03:17
03:35
TRACK 007
TRACK 008
03:47
03:49
TRACK 009
TRACK 010
03:53
03:45
a Change Device
Select
Tools
() Jump to Page
1/2 Page
✎
Do not disconnect the device while ripping is
in progress.
8. If you want to cancel ripping, press the E
button, and then select Yes. Select No to
continue ripping.
9.
' Return
When ripping is complete, the "Ripping
completed." message appears.
10. Press the E button to go back to the Playback
screen.
4.
To remove a file from the Playlist, move to the
file, and then press the YELLOW (C) button.
5.
Press the E button to play the selected files.
The Playlist screen appears.
✎
6.
To go to the Music List, press the 5 or RETURN
button.
✎
7.
To go back to the Playlist, press the E button.
✎
You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
If you go to the Music List from the Playlist,
and then return to the Playlist, the Playlist will
start playing again from the beginning.
✎
Playing Content
Creating a Music Playlist
✎
✎
This function is not available for DTS Audio
CDs.
This function may not be supported by some
discs.
Ripping encodes music in the .mp3 format at
192kbps.
On the Track list screen, you can choose Select
All or Deselect All.
- Use Select All to select all tracks, and then
press the E button. This cancells your
individual track selections.
- Use Deselect All to deselect all selected tracks
at once.
33 - English
HT-J5500_J5550W_XU-0302_ECO.indd 33
2015-04-02
1:56:37
Playing Content
Playing Photo Content
Using Bluetooth
You can play photo content located on a DVD, USB,
mobile device, or PC.
Using the Tools Menu
You can use a Bluetooth device to enjoy music with
high quality stereo sound, all without wires!
●
During playback, press the TOOLS button.
●
Start / Stop Slide Show
Select to play/pause the slide show.
Slide Show Speed
What is Bluetooth?
Select to adjust the slide show speed.
Background Music
Select to listen to music while viewing a slide
show.
Zoom
Select to enlarge the current picture.
(Enlarge up to 4 times)
Rotate
Select to rotate a picture. (This will rotate the
picture either clockwise or counter clockwise.)
Information
Shows the picture information including the file
name and size, etc.
✎
✎
Pairing distance : max. 2M,
Operating distance : max. 10M
Actual Bluetooth performance may differ
depending on your environment, even if you
use your Bluetooth device within the specified
operating distance.
Depending on the disc or storage device, the
Tools menu may differ. All options may not be
displayed.
To enable the background music function, the
photo file must be in the same storage media
as the music file. However, the sound quality
can be affected by the bit rate of the MP3
file, the size of the photo, and the encoding
method.
Creating a Photo Playlist
You can create a photo playlist in nearly the same
way you create a music playlist. See page 33 for
instructions. Select photo files instead of music files.
Bluetooth is a technology that enables Bluetoothcompliant devices to interconnect with each other
easily using a short, wireless connection.
● A Bluetooth device may hum or malfunction:
- When a part of your body is in contact with the
receiving/transmitting system of the Bluetooth
device or the Home Cinema.
- When the device is subject to electrical variation
from obstructions caused by a wall, corner, or
office partitioning.
- When the device is exposed to electrical
interference from same frequency-band devices
including medical equipment, microwave ovens,
and wireless LANs.
● Pair the Home Cinema with the Bluetooth device
while the two are close together.
● The further the distance is between the Home
Cinema and the Bluetooth device, the worse the
quality is.
If the distance exceeds the Bluetooth operational
range, the connection is lost.
● In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
● The Home Cinema has an effective reception
range of up to 10 meters in all directions if
there are no obstacles. The connection will be
automatically cut off if the device is out of this
range. Even within this range, the sound quality
may be degraded by obstacles such as walls or
doors.
● This wireless device may cause electrical
interference. during its operation.
34 - English
HT-J5500_J5550W_XU-0302_ECO.indd 34
2015-04-02
1:56:38
To Connect the Home Cinema to a Bluetooth
Device
✎
Connect
Before you begin, confirm that the Bluetooth device
supports the Bluetooth compliant stereo headset
function.
Press the FUNCTION button on the remote
control to display the BT message.
2.
Select the Bluetooth menu on the Bluetooth
device you want to connect. For instructions,
refer to the Bluetooth device's manual.
3.
Select "[HTS]JXXXXX" from the list.
● When the Home Cinema is connected to the
Bluetooth device, the device name of the
connected Bluetooth device, followed by the
name of the home cinema, will appear on
the front display of the home cinema.
4.
Play music on the connected device.
● You can listen to the music playing on the
connected Bluetooth device over the Home
Cinema system.
✎
The Home Cinema only supports Middle
Quality SBC data (up to 237kbps@48kHz),
and does not support High Quality SBC data
(328kbps@44.1kHz).
The AVRCP feature is supported. It's
functionality will differ, depending on the
specifications of the connected device.
Connect only to a Bluetooth device that
supports the A2DP Profile.
Only one Bluetooth device can be paired at a
time.
The search or connection functions may not
work properly in the following cases:
- If there a strong electric field near or around
the home cinema.
- If several Bluetooth devices are simultaneously
paired with product.
✎
✎
Home Cinema
You can disconnect the Bluetooth device from
the Home Cinema. For instructions, refer to the
Bluetooth device's manual.
● When the Home Cinema is disconnected from the
Bluetooth device, the Home Cinema will display
DISCONNECTED on the front display.
To Disconnect the Home Cinema from the
Bluetooth Device
Playing Content
1.
✎
For the best operational compatibility between
the home cinema and a Bluetooth device or
any other device, such as a Mobile Phone, we
recommend you update the device's OS to the
latest version.
To Disconnect the Bluetooth Device from the
Bluetooth device
✎
- If the Bluetooth device is turned off, not in
place, or malfunctions.
Note that such devices as microwave ovens, wireless
LAN adapters, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
and can cause electric interference.
Press the (
) button on the front panel of the
Home Cinema to switch from BT to another mode or
turn off the Home Cinema.
● Except when you disconnect the Home Cinema
by changing functions, the connected Bluetooth
device will wait a certain amount of time for
a response from the Home Cinema before
terminating the connection. (Disconnection time
may differ, depending on the Bluetooth device.)
✎
✎
In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between
the Home Cinema System and the Bluetooth
device exceeds 10 meters. When the Bluetooth
device comes back into effective range or you
restart the Bluetooth device, you will have to
pair the device and home cinema again to
reconnect.
In Bluetooth mode, the screen saver will start
if the Bluetooth device stays in the Ready state
for 5 minutes. To reconnect the Bluetooth
device, turn off the screen saver, and then
connect the device. To turn off the screen
saver, press any button on the remote control
(the Volume button, a number button, etc.)
35 - English
HT-J5500_J5550W_XU-0302_ECO.indd 35
2015-04-02
1:56:39
Playing Content
Using the Bluetooth Quick start
1) When you want to listen to the TV's audio
through the home cinema speakers.
2) When you want to listen to the audio from
a USB device plugged into the TV through
the home cinema speakers.
When the home cinema is turned off, connecting
your smart device to the product via a Bluetooth
connection can turn the home cinema on.
✎
The Quick start function is available when the
home cinema's power cord is plugged into an
AC wall outlet.
✎ To use this function, set Settings > System >
Quick start to On.
✎ To use this function, the Bluetooth connection
between the home cinema and your smart
device should have been established before.
In other words, the home cinema should be
found on the list of Bluetooth devices your
smart device has already connected to.
1. Connect your smart device to the product
via Bluetooth. (For information on Bluetooth
connections, refer to your smart device’s manual.)
2.
Use TV SOUND:
TV SOUND ON/OFF support specifications:
Anynet+
(HDMI-CEC)
Setting
ON
OFF
Once connected, the home cinema will turn
itself on automatically in BT mode.
● Select the desired music to play on your smart
device.
No
Operation
Using the Special Effects Remote
Control Buttons
TV SOUND
TV SOUND
If you have a TV that supports Anynet+ (HDMICEC), the TV SOUND button lets you direct the
TV's audio to the Home Cinema Speakers or the TV
Speakers. To use this function, follow these steps:
1.
Connect an HDMI cable to the TV and home
cinema. (See page 13)
2.
Set Anynet+ (HDMI-CEC) On in the home
cinema and TV.
3.
Press the TV SOUND button on the remote
control. TV SOUND ON flashes on the display
on the front panel, and then changes to
D. IN.
● When TV SOUND is on, TV audio outputs
through the Home Cinema speakers.
4.
Press the TV SOUND button again to turn TV
SOUND off.
● When TV SOUND is off, TV audio outputs
through the speakers of the connected
Anynet+ TV.
DSP/EQ
TV Sound ON
TV Sound OFF
HTS Speaker
Output
HTS Speaker
Mute
TV Speaker
Mute
TV Speaker
Output
HTS Speaker
Output
HTS Speaker
Mute
TV Speaker
Output
TV Speaker
Output
HTS Speaker
Output
HTS Speaker
Mute
TV Speaker
Output
TV Speaker
Output
DSP/EQ
You can adjust the sound with various sound
modes.
 DSPOFF : Select for normal listening.
 CINEMA : Produces realistic and powerful
sound for movies.
 MUSIC : Suitable for all music sources.
 GAME : Revs up video games with powerful
and realistic sound.
 M-STEREO (Multi Stereo) : Produces surround
sound from 2 channel input sources.
 POWER BASS : Pumps up the bass sound.
 LOUD : Improves bass sound characteristics
according to output level.
 NIGHT : Optimizes sound for night time
listening by compressing the dynamic range
and softening the sound.
 USER EQ : Provides a user adjustable Equaliser
so you can adjust music to your liking.
36 - English
HT-J5500_J5550W_XU-0302_ECO.indd 36
2015-04-02
1:56:40
Network Services
Using BD-LIVE™
3.
On your home cinema, select Change Device.
4.
Use the ▲▼ button to select your PC in the
Device List.
1.
Connect the product to your network.
(See page 14)
5.
Select the kind of file you want to view or play,
PHOTOS, VIDEOS, or MUSIC and then press E.
2.
Configure the network settings.
(See pages 21~25)
6.
Once the product is connected to your network, you
can enjoy various movie-related service contents
available on BD-LIVE compliant discs.
Use the ▲▼◀▶ button to select the folder
with the kind of files you selected, and then
press E. The File List is displayed.
7.
Select the file you want to view or play, and
then press E.
1.
✎
Attach a USB memory stick to the USB jack on
the front of the product, and then use BD Data
Management to check its remaining memory.
The memory device must have at least 1GB
of free space to accommodate the BD-LIVE
services.
Select Settings on the Home screen, and then
press the E button.
3.
Select System, and then press the E button.
4.
Select BD Data Management, and then press
the E button.
Select Change Device, and then press the E
button.
5.
6.
Select STORAGE DEVICE, and then press the
E button.
7.
Insert a Blu-ray Disc that supports BD-LIVE.
8.
Select an item from the list of BD-LIVE service
contents provided by the disc manufacturer.
✎
The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
Using DLNA
DLNA lets you access and play files located on your
PC through your home cinema.
Follow the directions in the DLNA user's guide to set
up DLNA on your PC and to tag folders and files you
want to share with the home cinema.
To access and play files located on your PC after you
have set up DLNA, follow these steps:
1.
Turn on your PC, your TV, and the home
cinema.
2.
Make sure the DLNA Shared server is running
on your PC.
✎
Apps
Your home cinema offers an extensive collection
of news, movies, weather, and other content you
can download directly to and enjoy on your home
cinema. First, check the network and make sure the
home cinema is connected to the Internet. Your
home cinema must be connected to the Internet to
use the Apps feature.
The apps offered through the Apps feature work
much like their on-line versions or, if different, are
easy to use.
Some apps require you to create an account before
you can use them. Although you can create an
account for most of these apps through your home
cinema, it is easier and quicker to create an account
by visiting the app sites on line using a PC, laptop,
or tablet with Internet access. Note that in some
cases, you will need to use the home cinema and
a PC, laptop, or tablet to establish an account. The
main difference between the regular on-line versions
and the versions you can access through your home
cinema is that with the home cinema versions, you
use your remote to enter letters and numbers as
opposed to a keyboard.
Network Services
2.
✎
You can create Playlists from files on your PC
in the same way you create playlists from files
on USB devices and discs.
With a few exceptions, you can control the
playback of files on your PC in the same
fashion you control the playback of files on
USB devices and discs.
You can also access files on your PC by first
selecting PHOTOS, VIDEOS, or MUSIC on the
Home screen, and then selecting your PC from
the device list that appears.
37 - English
HT-J5500_J5550W_XU-0302_ECO.indd 37
2015-04-02
1:56:41
Network Services
Using Apps
Using Opera TV Store
The first time you access any one of the apps, the
home cinema displays two agreements. You must
accept both agreements to download and use any
apps.
By default, the home cinema displays four popular
apps on the Home screen. You can view more apps
and change the apps the home cinema displays on
the Home screen by selecting the More button.
To start an app, highlight the app, double click it,
and then follow the directions displayed on the
screen.
To access Opera TV Store, select the Opera TV Store
button on the Home screen, and then press the E
button.
To exit the Opera TV Store screen, press the EXIT
button on your remote.
Viewing Additional Apps
Navigating in Opera TV Store
1.
Select the More button on the Home screen,
and then press the E button. The More Apps
screen appears displaying a bank of apps.
When the Opera TV Store screen appears, it displays
a bank of assorted apps. Use the ▲▼◀▶ buttons on
your remote to move the highlight from app to app.
2.
To view additional apps, move the highlight
to the right or left until another group of apps
appears.
3.
To exit the More Apps screen, select Close or
press the RETURN button or EXIT button on
your remote.
Changing the Apps Displayed on the Home
Screen
1.
Select the More button, and then press the E
button.
2.
Select the Edit button on the More Apps screen,
and then press the E button.
3.
Apps that the home cinema displays on the
Home page are marked with a check. Deselect
apps you want to remove from the Home
screen by highlighting each app, and then
pressing the E button.
4.
Select apps by highlighting each app, and then
pressing the E button. A check mark appears
on each app you select. You can have up to
four apps selected at a time.
5.
When done, select OK, and then press the E
button. The Home screen re-appears.
✎
To exit an application, press the EXIT button
on your remote.
To delete the login information for all Apps,
press the 5 button for 5 seconds or more in
Home Screen, No Disc Status.
✎
At the Opera TV Store, you will find high-quality
Internet video streaming, social network, and music
streaming services.
Accessing Opera TV Store
Selecting an App
Move the highlight to the app you want, and then
press the E button.
In the pop-up that appears, select OPEN to open the
app immediately or ADD TO MY APPS to add the
app to MY APPS. Press the RETURN button on your
remote to go back to the Opera TV Store screen.
Selecting Apps by Category
To make searching for apps easier, you can view apps
by categories such as New, Popular, All, Games,
Music, etc.
To select a category, use the ▲ button on your
remote to move the highlight to the top of the
screen.
Then, use the◀▶ buttons to select a category.
Using the My Apps Screen
To access the My Apps screen, highlight MY APPS,
and then press the E button. The My Apps screen
appears displaying all the apps you have saved with
the MY APPS designation.
38 - English
HT-J5500_J5550W_XU-0302_ECO.indd 38
2015-04-02
1:56:41
Deleting Apps from MY APPS
1.
Highlight the MENU button on the top of the
My Apps screen, and then press the E button
on your remote.
2.
Select REMOVE APPS in the menu, and then
press the E button. A red rectangle appears
around one of the apps.
3.
Move the rectangle to the app you want to
delete, and then press the E button.
4.
Repeat this process to delete additional apps.
5.
When finished, select DONE, and then press
the E button.
6.
Press the RETURN button to go back to the
Main screen.
Searching for Apps
Select SEARCH at the top of the screen, and
then press the E button.
2.
To search quickly for popular items, click one
of the popular search tabs at the top of the
screen.
3.
To search for an app by name, enter the app
name using the onscreen keyboard. Opera TV
Store will search as you type and display apps
with names that match the letters you enter.
● To cancel a current search, press the RETURN
button on your remote or select BACK on the
screen, and then press E.
The TV displays a connecting message (for
example, Connecting to Android_92gb...) and
then displays the connected message.
5.
In a few moments, the screen of your device
appears on the TV screen.
● When you are using the Screen Mirroring
function, video stuttering or audio dropouts
may occur, depending on your environment.
● The Home Cinema can connect to devices
that support AllShare Cast. Note that all
devices that have AllShare Cast may not
be fully supported, depending on the
manufacturer. For further information on
mobile connection support, refer to the
manufacturer’s web site.
● Bluetooth transmissions can interfere with
the Screen Mirroring signal. Before using
the Screen Mirroring function, we strongly
recommend that you turn off the Bluetooth
function on your smart phone or smart
device.
Network Services
1.
4.
Screen Mirroring
Screen Mirroring lets you display the screen of a
smart phone or other compatible device on the TV
screen using Miracast™ technology. Screen Mirroring
does not require a cable or a wireless router.
1.
From the Home screen, use the ◀▶ buttons to
select Screen Mirroring, and then press E.
2.
Launch AllShare Cast on your smart phone or
device.
3.
On your device, find the name of the home
cinema system in the list of available devices,
and then select it.
39 - English
HT-J5500_J5550W_XU-0302_ECO.indd 39
2015-04-02
1:56:42
Appendix
Additional Information
Digital Output
●
Notes
●
Connections
HDMI OUT
●
●
●
●
Certain HDMI output resolutions may not work,
depending on your TV.
You must have an HDMI connection to enjoy
videos with 3D technology.
A long HDMI cable may cause screen noise. If this
occurs, set HDMI Deep Colour to Off in the menu.
●
●
●
Settings
3D Settings
●
●
●
For some 3D discs, to stop a movie during 3D
playback, press the 5 button once. The movie
stops and the 3D mode option is de-activated.
To change a 3D option selection when you are
playing a 3D movie, press the 5 button once. The
Blu-ray menu appears. Press the 5 button again,
then select 3D Settings in the Blu-ray menu.
Depending on the content and the position of the
picture on your TV screen, you may see vertical
black bars on the left side, right side, or both sides.
TV Aspect Ratio
●
●
●
BD Wise (Samsung Products only)
●
●
●
BD-Live Internet Connection
●
●
●
Depending on your TV, certain HDMI output
resolutions may not work. Please refer to the user
manual of your TV.
This function is not available if the HDMI cable
does not support CEC.
If your Samsung TV has an Anynet+ logo, then it
supports the Anynet+ function.
BD Data Management
●
●
When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
If the product is connected to a device that does
not support BD Wise, you cannot use the BD Wise
function.
For proper operation of BD Wise, set the BD Wise
option in both the product and the TV to On.
The Internet connection may be restricted while
you are using BD-LIVE contents.
Anynet+ (HDMI-CEC)
●
Depending on the disc type, some aspect ratios
may not be available.
If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
If you select 16:9 Original, your TV may display 4:3
Pillarbox (black bars on the sides of the picture).
Be sure to select the correct Digital Output or you
will hear no sound or just loud noise.
If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
Regular DVDs do not have BONUSVIEW audio and
Navigation Sound Effects.
Some Blu-ray Discs do not have BONUSVIEW audio
and Navigation Sound Effects.
This Digital Output setup does not affect the
analogue (L/R) audio or HDMI audio output to your
TV. It affects the optical and HDMI audio output
when your product is connected to an AV receiver.
If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your Digital
Output selections (PCM or Bitstream).
Digital Output can be activated when Speaker
Selection is set to TV Speaker.
●
●
In the external memory mode, disc playback may
be stopped if you disconnect the USB device in the
middle of playback.
Only those USB devices formatted in the FAT file
system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support
the USB 2.0 protocol with 4 MB/sec or faster
read/write speeds.
The Resume Play function may not work after you
format the storage device.
The total memory available to BD Data
Management may differ, depending on conditions.
DivX
●
Video On Demand
For more information about DivX(R) VOD, visit
“http://vod.divx.com”.
40 - English
HT-J5500_J5550W_XU-0302_ECO.indd 40
2015-04-02
1:56:42
Playing JPEG files
Speaker Settings
●
When Speaker Selection is set to TV Speaker, audio
is produced by the TV speakers.
You can’t enlarge the subtitle and PG graphics in
the full screen mode.
●
Playing Content
HDMI audio
●
When HDMI audio is output to the TV speakers, it
is automatically down-mixed to 2 channels.
Using the TOOLS button while playing pictures
If the home cinema is connected to a BD Wise
compliant TV that has BD Wise On, the Picture
Settings menu will not appear.
The Background Music function will not work
unless the music file and the photo file are located
on the same storage media. Also, sound quality
can be impacted by the bit rate of the MP3 music
file, the size of the photos, and the encoding
method.
●
Audio Return Channel
●
●
●
When Anynet+ (HDMI-CEC) is Off, the Audio
Return Channel function is not available.
Using an HDMI cable not certified for ARC (Audio
Return Channel) may cause a compatibility
problem.
The ARC function is only available if an ARCcompliant TV is connected.
Playback
●
Disk and Format Compatibility
Playing Video files
●
Disc types and content your Product can
Play
Media
Selecting the Audio Language
●
●
●
The ◀▶ indicator will not appear on the screen
if the BONUSVIEW section does not contain any
BONUSVIEW audio settings.
The languages available through the Audio
Language function depend on the languages that
are encoded on the disc. This function or certain
languages may not be available.
Some Blu-ray Discs may allow you to select either
the PCM or Dolby Digital audio English soundtrack.
●
●
●
●
Depending on the Blu-ray Disc / DVD, you may be
able to change the subtitle language in the Disc
Menu. Press the DISC MENU button.
This function depends on the selection of subtitles
that are encoded on the disc and may not be
available on all Blu-ray Discs/DVDs.
Information about the main feature BONUSVIEW
mode will also appear if the Blu-ray Disc has a
BONUSVIEW section.
This function changes both the primary and
secondary subtitles at the same time.
The total number of primary and secondary
subtitles, respectively, is displayed.
Details
Blu-ray Disc BD-ROM or BD-RE/-R disc
recorded in the BD-RE
3D Blu-ray Disc format.
DVD-VIDEO,
DVD-RW,
DVD-R,
DVD+RW,
DVD+R,
VCD 1.1
DVD-VIDEO, recorded
DVD+RW/DVD-RW(V)/
DVD-R/+R discs that
have been recorded and
finalised, or a USB storage
media containing DivX,
MKV, MP4, VCD 1.1
contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on
CD-RW/-R, DVD-RW/-R,
BD-RE/-R discs or a USB
storage media containing
MP3 or WMA contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on
CD-RW/-R, DVD-RW/-R,
BD-RE/-R discs or a USB
storage media containing
JPEG contents.
VIDEO
Selecting the Subtitle Language
●
Disc Type
✎
Appendix
Video files with high bit rates of 20Mbps or more
strain the product’s capabilities and may stop
playing during playback.
The product may not play certain CD-RW/-R and
DVD-R because of the disc type or recording
conditions.
41 - English
HT-J5500_J5550W_XU-0302_ECO.indd 41
2015-04-02
1:56:43
Appendix
✎
✎
✎
✎
✎
If a DVD-RW/-R disc has not been recorded
properly in DVD video format, it will not be
playable.
Your product will not play content that has been
recorded on a DVD-R at a bit rate that exceeds 10
Mbps.
Your product will not play content that has been
recorded on a BD-R or USB device at a bit rate
that exceeds 30 Mbps.
Playback may not work for some types of discs, or
when you use specific operations, such as angle
change and aspect ratio adjustment. Information
about the discs is written in detail on the disc box.
Please refer to this if necessary.
When you play a BD-J title, loading may take longer
than a normal title or some functions may perform
slowly.
Logos of Discs the Product can Play
Blu-ray Disc
3D Blu-ray Disc
BD-LIVE
Dolby
DTS
Java
PAL broadcast system in U.K,
France, Germany, etc.
DivX
Disc Types your Product cannot Play
●
●
●
●
HD DVD
DVD-ROM/PD/MV-Disc,
etc
DVD-RW(VR mode)
CVD/CD-ROM/CDV/CDG/CD-I/LD
(CD-Gs play audio only,
not graphics.)
✎
✎
✎
✎
●
●
●
DVD-RAM
Super Audio CD
(except CD layer)
3.9 GB DVD-R Disc for
Authoring.
Region Code
This product may not respond to all operating
commands because some Blu-ray Disc, DVD, and
CD discs allow specific or limited operation and
provide only certain features during playback.
Please note that this is not a defect in the
product.
Samsung cannot guarantee that this product
will play every disc bearing the Blu-ray Disc,
DVD, or CD logo because disc formats evolve,
and problems and errors may occur during the
creation of Blu-ray Disc, DVD, and CD software
and/or the manufacture of discs.
Please contact the SAMSUNG Customer Care
Centre at, if you have questions or encounter
difficulty when playing Blu-ray Disc, DVD, or CD
discs in this product. Also, refer to rest of this user
manual for additional information on playback
restrictions.
Some commercial discs and DVD discs purchased
outside your region may not play on this product.
Both products and discs are coded by region. These
regional codes must match for a disc to play. If the codes
do not match, the disc will not play.
The Region Number for this product is displayed on the
rear panel of the product.
Disc Type
Blu-ray
Disc
Region
Code
Area
A
North America, Central
America, South America, Korea,
Japan, Taiwan, Hong Kong and
South East Asia.
B
Europe, Greenland, French
territories, Middle East, Africa,
Australia and New Zealand.
C
India, China, Russia, Central
and South Asia.
42 - English
HT-J5500_J5550W_XU-0302_ECO.indd 42
2015-04-02
1:56:43
1
The U.S., U.S. territories and
Canada
2
Europe, Japan, the Middle East,
Egypt, Africa, Greenland
3
Taiwan, Korea, the Philippines,
Indonesia, Hong Kong
4
Mexico, South America,
Central America, Australia,
New Zealand, Pacific Islands,
Caribbean
✎
✎
✎
AVCHD format discs need to be finalised.
"x.v.Colour" offers a wider colour range than
normal DVD camcorder discs.
Some MKV and MP4 format discs may not play,
depending on their video resolution and frame
rate.
Supported Formats
DVDVIDEO
Notes on the USB connection
●
5
Russia, Eastern Europe, India,
North Korea, Mongolia
●
●
●
●
6
●
If the Region number of a Blu-ray Disc/DVD
does not correspond to the Region number of
this product, the product cannot play the disc.
●
●
AVCHD (Advanced Video Codec High
Definition)
●
●
●
●
●
●
This product can play back AVCHD format discs. These
discs are normally recorded and used in camcorders.
The AVCHD format is a high definition digital video
camera format.
The MPEG-4 AVC/H.264 format compresses images
with greater efficiency than the conventional image
compressing format.
Some AVCHD discs use the "x.v.Colour" format. This
product can play back AVCHD discs that use the
"x.v.Colour" format.
"x.v.Colour" is a trademark of Sony Corporation.
"AVCHD" and the AVCHD logo are trademarks of
Matsushita Electronic Industrial Co., Ltd. and Sony
Corporation.
✎
●
●
●
●
●
●
●
Some AVCHD format discs may not play,
depending on the recording conditions.
●
Appendix
✎
China
Your product supports USB storage media, MP3
players, digital cameras, and USB card readers.
The product does not support folder or file names
longer than 128 characters.
Some USB/digital camera devices may not be
compatible with the product.
Your product supports the FAT 16, FAT 32, and NTFS
file systems.
Connect USB devices directly to the product’s USB
port. Connecting through a USB cable may cause
compatibility problems.
Inserting more than one memory device into a
multi-card reader may cause the reader to operate
improperly.
The product does not support the PTP (Peer to Peer)
protocol.
Do not disconnect a USB device while it is transferring
or recording data.
The bigger the image resolution, the longer the image
takes to display.
This product cannot play MP3 files with DRM (Digital
Rights Management) downloaded from commercial
sites.
Your product only supports video that is under 30fps
(frames per second).
Your product only supports USB Mass Storage Class
(MSC) devices such as thumb drives and USB HDD.
(HUB is not supported.)
Certain USB HDD Devices, multi-card readers and
thumb drives may not be compatible with this
product.
If some USB devices require excessive power, they may
be limited by the circuit safety device.
If playback from a USB HDD is unstable, provide
additional power by plugging the HDD into a wall
socket. If the problem continues, contact the USB
HDD manufacturer.
SAMSUNG is not responsible for any data file damage
or data loss.
43 - English
HT-J5500_J5550W_XU-0302_ECO.indd 43
2015-04-02
1:56:44
Appendix
Video File Support
File Extension
Container
Video Codec
Audio Codec
*.avi
AVI
DivX 3.11/4/5/6
MP4v3
H.264 BP/MP/HP
Resolution
MP3, Dolby Digital, DTS,
WMA, PCM
*.mkv
MKV
VC-1 AP, DivX 5/6
H.264 BP/MP/HP
MP3, Dolby Digital, DTS
*.wmv
WMV
(wmv9)
VC-1 AP
VC-1 SM
WMA
*.mp4
MP4
MP4 (mp4v)
H.264 BP/MP/HP
AAC
*.mpg /
*.mpeg
PS
MPEG1
MPEG2
H.264 BP/MP/HP
MP1, 2
Dolby Digital, DTS
1920x1080
 Limitations
-
Even when a file is encoded by a supported codec listed above, the file might not play if its content has a problem.
Normal playback is not guaranteed if the file’s container information is wrong or the file itself is corrupted.
Files having a higher bit rate/frame rate than standard may stutter during sound/video playback.
The Seek (skip) function is not available if the file’s index table is damaged.
 Video decoder
- Supports up to H.264 Level 4.1 and AVCHD
- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
- MPEG4 SP, ASP : Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
- Does not support GMC 2 or higher
 Audio decoder
- Supports WMA 7, 8, 9 and STD
- Does not support WMA sampling rate of 22050Hz mono.
- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96) Max bit rate: 320kbps
 Supported DivX subtitle file formats
- *.ttxt, *.smi, *.srt, *.sub, *.txt
Music File Support
File Extension
Container
Audio Codec
*.mp3
MP3
MP3
-
WMA
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
* Bit rates - All bit rates from 5kbps to 384kbps
*.wma
WMA
Support Range
Picture File Support
File Extension
Type
*.jpg / *.jpeg / *.jpe
JPEG
*.png
PNG
Resolution
15360x8640
44 - English
HT-J5500_J5550W_XU-0302_ECO.indd 44
2015-04-02
1:56:45
Digital Output Selections
Setup
Bitstream
(Unprocessed)
PCM
Connection
Audio
Stream on
Blu-ray Disc
Definition
for Blu-ray
Disc
■
HDMI supported AV receiver
PCM
Up to PCM 7.1ch
PCM
Dolby Digital
Up to PCM 5.1ch
Dolby Digital
Dolby Digital
Plus
Up to PCM 5.1ch
Dolby Digital Plus
Dolby TrueHD
Up to PCM 5.1ch
Dolby TrueHD
DTS
Up to PCM 5.1ch
DTS
DTS-HD High
Resolution
Audio
Up to PCM 5.1ch
DTS-HD High
Resolution Audio
DTS-HD Master
Audio
Up to PCM 5.1ch
DTS-HD Master
Audio
PCM
PCM 2ch
Dolby Digital
DTS
Any
Bitstream
(Re-encoded
Dolby D)
DTS re-encoded
Re-encoded
Dolby Digital *
PCM 2ch
PCM 2ch
PCM 2ch
Up to PCM 5.1ch
Dolby Digital
Dolby Digital
Dolby Digital
Up to PCM 5.1ch
DTS
DTS
DTS
Decodes the main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects.
Appendix
Audio
Stream on
DVD
Bitstream
(Re-encoded DTS)
Decodes the
main feature
Outputs only the
Decodes the main
audio and
main feature audio
feature audio and
BONUSVIEW
stream so that your BONUSVIEW audio
audio stream
AV receiver can
stream together
together into
decode the audio into PCM audio and PCM audio and
bitstream.
adds Navigation
adds Navigation
You will not hear
Sound Effects, then Sound Effects,
BONUSVIEW audio
re-encodes the
then re-encodes
or Navigation
PCM audio into DTS the PCM audio
Sound Effects.
bitstream.
into Dolby
Digital bitstream
or PCM.
If the Source Stream is 2ch or mono, "Re-encoded Dolby D" Setting are not applied. Output will be PCM 2ch.
Blu-ray Discs may include three audio streams :
- Main Feature Audio : The audio soundtrack of the main feature.
- BONUSVIEW audio : An additional soundtrack such as the director or actor’s commentary.
- Navigation Sound Effects : When you choose some menu navigation options, Navigation Sound Effects may sound.
Navigation Sound Effects are different on each Blu-ray Disc.
45 - English
HT-J5500_J5550W_XU-0302_ECO.indd 45
2015-04-02
1:56:46
Appendix
Resolution according to the output mode
Blu-ray Disc/E-contents/Digital Contents playback
DVD playback
HDMI Mode
Output
Setup
BD Wise
E-contents/
Digital contents
HDMI Mode
Blu-ray Disc
Resolution of Blu-ray
Disc
1080p@60F
576i/480i
Auto
Max. Resolution of TV input
1080p@60F
1080p@60F
Max. Resolution of TV input
-
1080p
-
1080p
Movie Frame : Auto (24 fps)
1080p@24F
-
1080i
1080i
1080i
720p
720p
720p
576p/480p
576p/480p
576p/480p
Troubleshooting
Refer to the table below when this product does not function properly. If the problem you are experiencing is not
listed below or if the instructions below do not help, turn off the product, disconnect the power cord and contact the
nearest authorized dealer or Samsung Electronics Service Centre.
Symptom
You cannot eject the disc.
Check/Remedy
●
●
Playback does not start.
●
●
●
Playback does not start
immediately when you press
the 6/7 button.
●
No sound.
●
●
●
●
You can only hear sound
from a few speakers, but not
all 6.
●
●
●
●
Is the power cord plugged securely into the outlet?
Turn off the power, and then turn it back on.
Check the region number of the Blu-ray/DVD disc.
A Blu-ray/DVD disc purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this product.
Make sure that the rating level is correct.
Are you using a deformed disc or a disc with scratches on the surface?
Wipe the disc clean.
The home cinema does not play sound during fast playback, slow playback, and
step motion playback.
Are the speakers connected properly? Is the speaker setup correctly customized?
Is the disc severely damaged?
On certain Blu-ray/DVD discs, sound is output from the front speakers only.
Check if the speakers are connected properly.
Adjust the volume.
When playing audio from a CD, the radio, or a TV, the unit outputs sound to the
front speakers only.
46 - English
HT-J5500_J5550W_XU-0302_ECO.indd 46
2015-04-02
1:56:46
Symptom
Check/Remedy
Dolby Digital 5.1 CH
Surround Sound is not
produced.
●
The remote control does not
work.
●
●
●
●
●
●
The disc is rotating but
there is no picture.
Picture quality is poor and
the picture is shaking.
●
●
●
●
Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround
Sound is produced only if the disc is recorded with 5.1 channel sound.
Is the audio language correctly set to Dolby Digital 5.1-CH in the information
display?
Are you operating the remote within its operational range and within the proper
angle relative to the sensor?
Are the batteries drained?
Have you selected the correct mode? Press the function button to change the
mode (BD/DVD, D. IN, AUX, etc.)
Is the TV power on?
Are the video cables connected properly?
Is the disc dirty or damaged?
A poorly manufactured disc may not be playable.
●
The Audio Language and subtitle functions will not work if the disc does not
contain multiple language sound tracks or subtitles.
The menu screen does not
appear even when you select
the menu function.
●
Are you using a disc that does not contain menus?
The aspect ratio cannot be
changed.
●
The home cinema can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter
Box mode, or 4:3 Pan-Scan mode, but plays 4:3 Blu-ray/DVD discs in 4:3 mode
only. Refer to the Blu-ray Disc jacket, and then select the appropriate aspect ratio.
●
Press and hold the remote control's 5 button for 5 seconds in STANDBY mode.
This will reset the unit.
- Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
You have forgotten the
rating level password.
●
With no disc in the product, press and hold the product's 5 button for longer
than 5 seconds. INIT appears on the display and all settings will return to their
default values.
- Using the RESET function will erase all stored settings.
Do not use this function unless necessary.
Can't receive radio
broadcasts.
●
Is the antenna connected properly?
If the antenna's input signal is weak, install an external FM antenna in an area
with good reception.
There is no sound when
you try to listen to TV audio
through the home cinema
speakers.
●
●
●
The product is not
working.
(Example: The power goes
off or you hear a strange
noise.)
The Product is not
working normally.
●
Appendix
Audio language and subtitles
do not work.
If you press the ^ button while listening to TV audio using the D. IN or AUX
functions, the Blu-ray/DVD disc functions are turned on and the TV audio is
muted.
47 - English
HT-J5500_J5550W_XU-0302_ECO.indd 47
2015-04-02
1:56:47
Appendix
Symptom
Check/Remedy
"Not Available" appears on
screen.
●
The feature is unavailable or the action cannot be completed at this time
because:
1. The Blu-ray/DVD disc's software restricts it.
2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to
a resolution your TV cannot
support (for example,
1080p), you may not see a
picture on your TV.
●
Press and hold the 5 button on front panel for more than 5 seconds with no
disc in the product. All settings will revert to their factory settings.
No HDMI output.
●
Check the connection between the TV and the HDMI jack of the product.
Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.
●
●
If random noise appears on the screen, it means that TV does not support HDCP
(High-bandwidth Digital Content Protection).
You can see folders shared
through DLNA, but cannot
see the files.
●
DLNA shows only Photo, Music, and Movie files. It does not display other kinds
of files.
Video plays intermittently.
●
Check if the network is stable.
Check if the network cable is properly connected and if the network is
overloaded.
Abnormal HDMI output
appears on the screen.
DLNA function
●
The DLNA connection
between the TV and PC is
unstable.
●
●
IP addresses under the same subnetwork should be unique, otherwise IP collision
can cause an unstable connection.
Check if you have a firewall enabled.
If so, disable the firewall function.
BD-LIVE
The home cinema cannot
connect to the BD-LIVE
server.
●
●
●
●
●
When using the BD-LIVE
service, an error occurs.
✎
●
Test whether the network connection is active by using the Network Status
function.
Check whether a USB memory device is connected to the product.
The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See pages 37
and 40.)
See if the BD-Live Internet Connection option is set to Allow(All).
If all above fails, contact the content provider or update to the latest firmware.
The USB memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management. (See pages 37
and 40.)
When the factory default settings are restored, all stored user BD data is deleted.
48 - English
HT-J5500_J5550W_XU-0302_ECO.indd 48
2015-04-02
1:56:47
Hereby, Samsung Electronics, declares that this equipment is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
The original Declaration of Conformity may be found at http://www.samsung.com, go to Support >
Search Product Support and enter the model name.
This equipment may be operated in all EU countries.
Specifications
Weight
1.90 kg
Dimensions
430.0 (W) x 55.0 (H) x 224.0 (D) mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Signal/noise ratio
55 dB
Usable sensitivity
12 dB
Total harmonic distortion
1.0 %
Video
1080p, 1080i, 720p, 576p/480p
Audio
PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output
165W x 2 (3Ω)
Centre speaker output
170W (3Ω)
Surround speaker output
165W x 2 (3Ω)
Subwoofer speaker output
170W (3Ω)
Frequency response
20Hz~20kHz (±3dB)
S/N Ratio
70dB
Channel separation
60dB
Input sensitivity
(AUX) 500mV
General
Appendix
FM Tuner
HDMI
Amplifier
49 - English
HT-J5500_J5550W_XU-0302_ECO.indd 49
2015-04-02
1:56:48
Appendix
HT-J5500
Speaker
system
Impedance
Frequency range
Rated input
Front
Dimensions (W x H x D)
(Unit : mm)
Weights
(Unit : kg)
83.4 x 170.5 x 101.0
0.45
165W
200Hz ~ 20kHz
Surround
83.4 x 129.0 x 101.0
0.40
268.8 x 87.6 x 101.0
0.58
255.0 x 297.0 x 255.0
4.43
Dimensions (W x H x D)
(Unit : mm)
Weights
(Unit : kg)
83.4 x 1053.0 x 101.0
(Stand base: Φ255.0)
3.15
83.4 x 1053.0 x 101.0
(Stand base: Φ255.0)
2.98
268.8 x 87.6 x 101.0
0.58
255.0 x 297.0 x 255.0
4.43
3Ω
Centre
170W
Subwoofer
20Hz ~ 200Hz
HT-J5550W
Speaker
system
Impedance
Frequency range
Rated input
Front
165W
Surround
200Hz ~ 20kHz
3Ω
Centre
170W
Subwoofer
✎
✎
✎
✎
✎
20Hz ~ 200Hz
Network speeds equal to or below 10Mbps are not supported.
Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
Weight and dimensions are approximate.
Design and specifications are subject to change without prior notice.
For the power supply and Power Consumption, refer to the label attached to the product.
SWA-7000 (HT-J5550W only)
Weight
0.73 kg
Dimensions (W x H x D)
50.0 X 201.3 X 132.0 mm
Operating Temperature Range
+5°C to +35°C
Operating Humidity Range
10 % to 75 %
Output
165W x 2 CH
Frequency range
20Hz~20KHz
S/N Ratio
65dB
50 - English
HT-J5500_J5550W_XU-0302_ECO.indd 50
2015-04-02
1:56:48
Licences
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under licence from
DTS Licencing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together
are registered trademarks, and DTS-HD Master Audio | Essential is a trademark of
DTS, Inc. DTS, Inc. All Rights Reserved.
This DivX Certified device has passed rigorous testing to ensure it plays DivX video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your
registration code in the DivX VOD section of your device setup menu.
DivX Certified to play DivX video up to HD 1080p, including premium content.
DivX , DivX Certified and associated logos are trademarks of DivX, LLC and are used under licence.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274.
DLNA , the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or
certification marks of the Digital Living Network Alliance.
Appendix
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licencing LLC in the United States and other
countries.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks
of their respective owners.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray Disc Association.
This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film
and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be
displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information Centre at
http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing
address to: Cinavia Consumer Information Centre, P.O. Box 86851, San Diego, CA, 92138, USA."
This product incorporates proprietary technology under licence from Verance Corporation and is protected by U.S.
Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret
protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 20042010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.
- Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
51 - English
HT-J5500_J5550W_XU-0302_ECO.indd 51
2015-04-02
1:56:49
UNITED KINGDOM
This Samsung product is warranted for the period
of twelve (12) months from the original date
of purchase, against defective materials and
workmanship. In the event that warranty service
is required, you should return the product to the
retailer from whom it was purchased. However,
Samsung Authorised Dealers and Authorised Service
Centres in other EC Countries will comply with the
warranty on the terms issued to purchasers in the
country concerned. In case of difficulty, details of
our Authorised Service Centres are available from:
4.
This product is not considered to be defective
in materials nor workmanship by reason that
it requires adaptation in order to conform to
national or local technical or safety standards
in force in any Country other than the one for
which the product was originally designed and
manufactured. This warranty will not cover,
and no re-imbursement will be made for such
adaptation nor any damage which may result.
5.
This warranty covers none of the following:
a) Periodic check ups, maintenance and repair
or replacement of parts due to normal
wear and tear.
b) Cost relating to transport, removal or
installation of the product.
c) Misuse, including the faiure to use this
product for its normal purposes or incorrect
installation.
d) Damage caused by Lightning, Water, Fire,
Acts of God, War, Public Disturbances,
incorrect mains voltage, improper ventilation
or any other cause beyond the control of
Samsung.
6.
This warranty is valid for any person who legally
acquired possession of the product during the
warranty period.
7.
The consumers statutory rights in any applicable
national legislation whether against the retailer
arising from the purchase contract or otherwise
are not affected by this warranty. Unless there
is national legislation to the contrary, the
rights under this warranty are the consumers
sole rights and Samsung, its subsidiaries and
distributors shall not be liable for indirect or
consequential loss or any damage to records,
compact discs, videos or audio taper or any
other related equipment or material.
Samsung Electronics U.K. Ltd
Samsung Customer Support Centre
Selectapost 38, Sheffield, S97 3FJ
United Kingdom
United Kingdom
Tel : 0330 SAMSUNG (7267864)
www.samsung.com/uk/support
EIRE
Tel : 0818 717100
www.samsung.com/ie/support
■ WARRANTY CONDITIONS
1.
The warranty is only valid if, when warranty
service is required, the warranty card is fully
and properly completed and is presented with
the original invoice or sales slip or confirmation,
and the serial number on the product has not
been defaced.
2.
Samsung’s obligations are limited to the
repair or, at its discretion, replacement of the
product or the defective part.
3.
Warranty repairs must be carried out by
Authorised Samsung Dealers or Authorised
Service Centres. No re-imbursement will be
made for repairs carried out by non Samsung
Dealers and, any such repair work and
damage to the products caused by such repair
work will not be covered by this warranty.
HT-J5500_J5550W_XU-0302_ECO.indd 52
EIRE
SAMSUNG ELECTRONICS (U.K.) LTD.
2015-04-02
1:56:49
2015 Samsung Electronics Co., Ltd. All rights reserved.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please
contact the SAMSUNG customer care centre.
Area
` Europe
Contact Centre 
U.K
EIRE
0330 SAMSUNG (7267864)
0818 717100
0180 6 SAMSUNG bzw.
0180 6 7267864*
GERMANY
(*0,20 €/Anruf aus dem dt. Festnetz, aus
dem Mobilfunk max. 0,60 €/Anruf)
FRANCE
01 48 63 00 00
ITALIA
800-SAMSUNG (800.7267864)
SPAIN
0034902172678
PORTUGAL 808 20 7267
LUXEMBURG 261 03 710
NETHER0900-SAMSUNG (0900-7267864) (€ 0,10/
LANDS
Min)
BELGIUM
02-201-24-18
NORWAY
DENMARK
FINLAND
SWEDEN
815 56480
70 70 19 70
030-6227 515
0771 726 7864 (0771-SAMSUNG)
801-172-678* lub +48 22 607-93-33 *
* (koszt połączenia według taryfy operatora)
0680SAMSUNG (0680-726-786)
0680PREMIUM (0680-773-648)
0800 - SAMSUNG (0800-726 786)
0800-SAMSUNG (0800-7267864)
[Only for Premium HA] 0800-366661
[Only for Dealers] 0810-112233
POLAND
HUNGARY
SLOVAKIA
AUSTRIA
Web Site
www.samsung.com/uk/support
www.samsung.com/ie/support
SWITZERLAND
www.samsung.com/de/support
CZECH
www.samsung.com/fr/support
www.samsung.com/it/support
www.samsung.com/es/support
www.samsung.com/pt/support
www.samsung.com/support
CROATIA
BOSNIA
MONTENEGRO
www.samsung.com/nl/support
www.samsung.com/be/support
(Dutch)
www.samsung.com/be_fr/
support (French)
www.samsung.com/no/support
www.samsung.com/dk/support
www.samsung.com/fi/support
www.samsung.com/se/support
SLOVENIA
SERBIA
BULGARIA
ROMANIA
CYPRUS
GREECE
www.samsung.com/pl/support
www.samsung.com/hu/support
www.samsung.com/sk/support
Contact Centre 
Area
LITHUANIA
LATVIA
ESTONIA
Web Site
www.samsung.com/ch/support
(German)
0800 726 78 64 (0800-SAMSUNG)
www.samsung.com/ch_fr/
support (French)
800 - SAMSUNG (800-726786)
www.samsung.com/cz/support
Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 Praha 4
072 726 786
www.samsung.com/hr/support
055 233 999
www.samsung.com/support
020 405 888
www.samsung.com/support
080 697 267 (brezplačna številka)
090 726 786 (0,39 EUR/min)
klicni center vam je na voljo od ponedeljka
do petka od 9. do 18. ure.
011 321 6899
800 111 31 , Безплатна телефонна линия
08008 726 78 64 (08008 SAMSUNG )
Apel GRATUIT
8009 4000 only from landline, toll free
80111-SAMSUNG (80111 726 7864) only
from land line
(+30) 210 6897691 from mobile and land
line
8-800-77777
8000-7267
800-7267
www.samsung.com/si
www.samsung.com/rs/support
www.samsung.com/bg/support
www.samsung.com/ro/support
www.samsung.com/gr/support
www.samsung.com/lt/support
www.samsung.com/lv/support
www.samsung.com/ee/support
www.samsung.com/at/support
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be
disposed of with other household waste at the end of their working life. Where marked, the chemical symbols
Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC
Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health
or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste
and recycle them through your local, free battery return system.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
AH68-02799A-00
HT-J5500_J5550W_XU-0302_ECO.indd 53
AH68-02799A-00
2015-04-02
1:56:50
Download PDF