Samsung | HT-DS1100 | Samsung HT-DS1100 Benutzerhandbuch

1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 3
SLIM DIGITAL HOME
CINEMA SYSTEM
HT-DS1000
HT-DS1100
Instruction Manual
COMPACT
DIGITAL AUDIO
COMPACT
DIGITAL VIDEO
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 4
Safety Warnings
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE REAR COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified
as a CLASS 1 LASER product.
Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
This symbol indicates that dangerous voltage which
can cause electric shock is present inside this unit.
This symbol alerts you to important operating and
maintenance instructions accompanying the unit.
WARNING: To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
Wiring the Main Power Supply Plug(UK Only)
IMPORTANT NOTICE
The main lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin
face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same
colour as the fuse fitted in the plug. Replacement covers are available from your dealer.
If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you
should obtain a suitable safety approved extension lead or consult your dealer for assistance.
However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the
plug to a main socket as there is a risk of shock hazard from the bared flexible cord.
Never attempt to insert bare wires directly into a main socket. A plug and fuse must be used at all times.
IMPORTANT
The wires in the main lead are coloured in accordance with the following code:–
BLUE = NEUTRAL
BROWN = LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN
AND YELLOW.
1
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 5
Precautions
PREPARATION
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation
slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may
become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD
player to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
Phones
Protect the player from moisture(i.e. vases) , and excess heat(e.g.fireplace) or equipment creating strong magnetic or electric fields (i.e.speakers...). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household
trash.
2
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 6
Features
Multi-Disc Playback & FM Tuner
The HT-DS1000/HT-DS1100 combines the convenience of multi-disc playback capability,
including DVD-AUDIO, DVD-VIDEO, VCD, CD, MP3-CD, WMA-CD, DivX, CD-R/RW, and
DVD-R/RW, with a sophisticated FM tuner, all in a single player.
DVD-Audio compatible
Experience the super high-quality audio performance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound
quality in terms of dynamic range, low-level resolution and high-frequency detail.
Soft Touch Function Selection
The buttons on the front panel of the main unit are touch sensitive and easy to use.
Super Digital Sound Master
Equipped with a new digital audio technology (Auto Sound Calibration, Magic Sound
Field, and Magic Headphone) developed in cooperation with DiMagic Co., Ltd. in
Japan, you'll enjoy a more lively and sensitive sound.
Logo Sound
When you turn on the power, a ‘sound logo’ will be heard.
TV Screen Saver Function
The HT-DS1000/HT-DS1100 automatically brightens and darkens the brightness of the
TV screen after 3 minutes in the stop mode.
The HT-DS1000/HT-DS1100 automatically switches itself into the power saving mode
after 20 minutes in the screen saver mode.
AV SYNC Function
Video may lag behind the audio if the unit is connected to a digital TV.
To compensate for this, you can adjust the audio delay time to sync up with the video.
HDMI
HDMI transmits DVD video and audio signals simultaneously, and provides a clearer
picture.
3
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 7
Contents
PREPARATION
PREPARATION
Safety Warnings..................................................................................................................................................................1
Precautions .........................................................................................................................................................................2
Features..............................................................................................................................................................................3
Notes on Discs....................................................................................................................................................................5
Description ..........................................................................................................................................................................7
CONNECTIONS
Installing DVD player .........................................................................................................................................................13
Connecting the Speakers ...................................................................................................................................................14
Connecting the Video Out to TV.........................................................................................................................................17
Connecting External Components ......................................................................................................................................21
Connecting the FM Antenna ...............................................................................................................................................23
Before Using Your DVD Player...........................................................................................................................................24
OPERATION
Disc Playback .....................................................................................................................................................................25
MP3-CD Playback ..............................................................................................................................................................27
JPEG Disc Playback...........................................................................................................................................................28
DivX Playback.....................................................................................................................................................................29
Displaying Disc Information ................................................................................................................................................31
Checking the Remaining Time............................................................................................................................................32
Fast/Slow Playback ............................................................................................................................................................33
Skipping Scenes/Songs......................................................................................................................................................34
Repeat Playback.................................................................................................................................................................35
A-B Repeat Playback..........................................................................................................................................................37
Angle Function....................................................................................................................................................................38
Zoom Function....................................................................................................................................................................39
Bonus Group / Navigating Pages .......................................................................................................................................40
Selecting Audio/Subtitle Language .....................................................................................................................................41
Moving Directly to a Scene/Song .......................................................................................................................................42
Using Disc Menu.................................................................................................................................................................43
Using the Title Menu...........................................................................................................................................................44
SETUP
Setting the Language..........................................................................................................................................................45
Setting TV Screen type.......................................................................................................................................................47
Setting Parental Controls (Rating Level) ............................................................................................................................49
Setting the Password..........................................................................................................................................................51
Setting the Wallpaper .........................................................................................................................................................53
DVD Playback Mode...........................................................................................................................................................55
Setting the Speaker Mode ..................................................................................................................................................57
Setting the Test Tone ..........................................................................................................................................................58
Setting the Delay Time .......................................................................................................................................................59
Setting the Audio Quality ....................................................................................................................................................61
Setting the DRC (Dynamic Range Compression) ..............................................................................................................63
AV SYNC Setup..................................................................................................................................................................64
Dolby Pro Logic II Mode .....................................................................................................................................................65
Dolby Pro Logic II Effect .....................................................................................................................................................66
Auto Sound Calibration Setup ............................................................................................................................................67
Live Surround Mode ...........................................................................................................................................................69
RADIO OPERATION
Listening to Radio ...............................................................................................................................................................71
Presetting Stations..............................................................................................................................................................72
About RDS broadcasting ....................................................................................................................................................73
MISCELLANEOUS
Convenient Functions .........................................................................................................................................................75
Operating a TV with the Remote Control ...........................................................................................................................77
Before Calling for Service...................................................................................................................................................79
Cautions on Handling and Storing Discs............................................................................................................................81
Specifications......................................................................................................................................................................82
Notes on Terminology .........................................................................................................................................................83
Memo ..................................................................................................................................................................................84
4
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 8
Notes on Discs
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
VIDEO
1
~ 6
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Playable Discs
Disc Type
Mark (Logo)
Recorded Signals
Disc Size
12cm
DVD-AUDIO
DVD-VIDEO
Audio + Video
8cm
COMPACT
Audio + Video
VIDEO-CD
DIGITAL VIDEO
COMPACT
Audio
AUDIO-CD
DIGITAL AUDIO
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
12cm
74 min.
8cm
20 min.
12cm
74 min.
8cm
20 min.
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM cannot be played on this player.
•
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect
•
5
your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted
picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 9
PREPARATION
Disc Recording Format
CD-R/RW Discs
• Depending on the disc recording device (CD-Recorder or PC ) and the condition of the disc, some CD-R
discs may not be playable.
• Use a 650MB/74 minute CD-R. Avoid CD-R media, as they may not be playable.
• If possible, do not use CD-RW (Rewritable) media, as they may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open,
you may not be able to fully play the disc.
CD-R/RW MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
• If more than 500 tracks are recorded on a single CD, a maximum of 500 tracks can be played.
• If more than 300 folders are recorded on a single CD, a maximum of 300 folders can be played.
CD-R/RW JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the
disc can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
6
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 10
Description
—Front Panel—
Play/Pause (
) button
Power (
) button
Volume control
Stop ( ) button
Open/Close (
) button
Function button
Tuning UP & Skip (
) button
Tuning Down & Skip (
) button
Display
DOLBY DIGITAL indicator
DSP indicator
PRO LOGIC II indicator
DVD AUDIO indicator
DTS Disc indicator
7
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 11
PREPARATION
—Rear Panel—
Resolution Switch
External Digital in Optical 1,2
Input Connectors
Cooling Fan
Accessories
Remote Control
Auto Sound Calibration
Microphone
Video Cable
HDMI Cable
HDMI/DVI Cable
FM Antenna
Vertical Stand
Screw Large : 3EA
Screw Small : 4EA
DIN Audio Connection
Cable
Horizontal Stand
Screw Large : 2EA
User's Manual
8
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 12
Description
Top
Headphone Jack
Auto Sound Calibration button
FM Antenna Connector
Bottom
HDMI Video/Audio
Output Connector
COMPONENT VIDEO
OUTPUT Connector
External Audio Component
Input Connectors
DIN Audio Output Jack
Video Output Connector
9
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 13
PREPARATION
Subwoofer
PSWS1000T (Subwoofer of HT-DS1000)
Subwoofer Level
control
Crossover frequency
control
DIN Audio Input terminal
Speaker Output Terminals
Subwoofer Power button
< Right >
< Rear >
PSWS1100T (Subwoofer of HT-DS1100)
Subwoofer Level control
Subwoofer Power button
DIN Audio Input terminal
Crossover frequency control
Speaker Output Terminals
< Front >
< Rear >
10
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 14
Description
—Remote Control—
TV, DVD POWER button
TV/VIDEO, DIMMER button
OPEN/CLOSE button
TV DVD RECEIVER
OPEN/CLOSE
TV/VIDEO
DIMMER
MODE
DVD
TUNER
AUX
ASC
SLOW
MO/ST
SUB TITLE
SUPER5.1
MUSIC
Auto Sound Calibration button
DVD button
LSM
SUPER 5.1 button
Live Surround Mode button/
Virtual Headphone button
MOVIE
Play/Pause button
PL II
EFFECT
PL II MODE button
INFO
U
MEN
Tuning Preset/CD Skip button
INFO button
E
UT
M
RE
TU
RN
MENU button
ENTER
RDS DISPLAY
TA
TEST TONE
PTY–
PTY+
SOUND EDIT
PTY SEARCH
TUNER
MEMORY
DCDi
SLEEP
LOGO
EZ VIEW
NTSC/PAL
MUTE button
Direction/Enter button
Number(0~9) buttons
EZ VIEW, NTSC/PAL button
CANCEL
ZOOM
REPEAT
REMAIN
TEST TONE button
SOUND EDIT button
TUNER MEMORY, DCDi button
ZOOM button
CANCEL button
REMAIN button
REPEAT button
11
Stop button
PL II EFFECT button
TUNING/CH button
VOLUME button
SLEEP button
LOGO COPY button
TUNER button
SUBTITLE button
SLOW, MO/ST button
MOVIE button
TUNING/CH
PL II
MODE
RDS Selection button
AUX button
V-H/P
VOLUME
RETURN button
TV indicator
DVD RECEIVER indicator
MODE button
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 15
PREPARATION
Insert Remote Batteries
1
Remove the battery
cover on the back
of the remote by
pressing down and
sliding the cover in
the direction of the
arrow.
Caution
2
Insert two 1.5V AAA
batteries, paying
attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Follow these precautions to avoid leaking or cracking batteries:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 30° from the remote control
sensor.
To open the remote control cover, push the
top of the cover, then slide downward.
12
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 16
Installing DVD player
You can select and install either the Vertical or Horizontal Stand, depending on your preference.
Vertical Stand (supplied)
Main unit
1
Fix the round support and Vertical
Stand with screws 3EA.
2
Open the cover on the rear of Vertical
Stand and connect the Audio/Video
cable into the Vertical Stand.
3
Locate the two indentations on the bottom
of the Main unit. Slide the Main unit onto
the two matching dowels on Vertical Stand.
4
Fix the Vertical Stand and the main
unit with screws 4EA.
REAR OF MAIN UNIT
4
3
(See pages 19~24 for how to connect the cable.)
Vertical Stand
2
Round support
1
REAR OF
VERTICAL STAND
Horizontal Stand (supplied)
Main unit
1
Locate the two indentations on the side
of the main unit and slide onto the two
matching dowels on Horizontal Stand.
2
Fix the Horizontal Stand and the
main unit with screws 2EA.
Horizontal Stand
13
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 17
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
C
SW
R
LS
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
the TV stand.
Front Speakers L R
• Place these speakers in front of your listening
•
•
position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be at
the same height as your ear.
Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
CONNECTIONS
L
RS
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8 feet)
For 55" TVs 3.5~4m (11~13 feet)
Rear Speakers LS RS
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers to face each other.
• Place them about 60 to 90cm (2 to 3feet) above your ear, facing
slightly downward.
the front and center speakers, the rear speakers are used
* toUnlike
handle mainly sound effects and sound will not come from
them all the time.
Center Speaker
• It is best to install it at the same height as the front
C
•
speakers.
You can also install it directly over or under the TV.
Subwoofer SW
• The position of the subwoofer is not so critical.
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
14
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 18
Connecting the Speakers
Connect the front, rear and center speakers to the speaker output jack on the side of subwoofer.
HT-DS1000
Rear of Subwoofer (PSWS1000E)
Bottom of Main unit
(HT-DS1000)
Center Speaker
Green
Rear Speaker (R)
Rear Speaker (L)
Gray
Red
Front Speaker (R)
Connecting Main Unit to Subwoofer
1
Use the supplied DIN audio connection cable to connect DIN
Audio Out on the main unit to DIN Audio Input on the
subwoofer.
2
Press the subwoofer power button on the subwoofer to turn
on the power.
Subwoofer Function
Subwoofer: The subwoofer is active, with a built-in a 150W amplifier, and
outputs rich bass through 8 inch speaker units. You can listen to
the optimal LFE (bass) by using the subwoofer-only volume
control and the variable crossover control.
• The control is calibrated from –6dB (minimum) to +6dB (maximum).
Crossover: The Crossover sets the cutoff frequency for the subwoofer. Set the
Crossover control for the best bass response in your room.
• You can adjust the bass or treble output from the front, rear,
center speakers and the subwoofer.
• To the left increases the bass and to the right, treble.
15
Blue
White
Front Speaker (L)
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 19
HT-DS1100
Rear of Subwoofer (PSWS1100E)
Center Speaker
Green
Rear Speaker (R)
Rear Speaker (L)
Gray
Blue
Red
White
Front Speaker (R)
Front Speaker (L)
Connecting the Speakers
1
Press down the terminal
tab on the back of the
speaker.
2
Insert the black wire into the
black terminal (–) and the gray
wire into the gray (+) terminal,
and then release the tab.
Black
Gray
or
Caution
• Do not let children play with or near the speakers.
•
•
They could get hurt if a speaker falls.
When connecting the speaker wires to the speakers,
make sure that the polarity (+/–) is correct.
Never touch the speaker terminal while the power is on.
Doing so may result in a risk of electric shock.
3
Connect the correct color speaker cable
to the same color speaker output terminal
on the rear of the subwoofer, according
to the polarity markings (+/–).
Example: Connect the green center speaker cable
to the green center speaker output
terminal on the rear of the subwoofer
according to the polarity markings (+/–).
Note
• If you place a speaker near your TV set,
screen color may be distorted because of
the magnetic field generated by the
speaker. If this occurs, place the speaker
away from your TV set.
16
CONNECTIONS
Bottom of Main unit
(HT-DS1100)
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 20
Connecting the Video Out to TV
Method1
When you connect to Video Out
1
Connect the Video Out to the Video
In on the TV.
2
Set the Video Input source on your TV
to the corresponding Video output on
your Home Theater.
Method 2
Good Quality
Video Cable
(supplied)
When you connect to Component Out
Better Quality
Connect if the TV component input supports the resolution of over 576p(480p).
1
Connect the component output (PR,
PB, Y) to the component input on the
TV (PR, PB, Y).
• Be sure to make the correct connections between the
when you connect the component output jacks to the
TV. If these are connected wrong, the screen may show
red or blue, or there may be no screen at all.
2
Set the Video Input source on your TV
to the corresponding Component
output on your Home Theater.
Note
17
The Component input may be marked ‘DVD input’
depending on the TV.
• If the TV only supports a resolution of 576i(480i), the screen may be divided into 2 screens, or
display nothing.
1p~44p(DS1000)-GB
Method 3
9/16/04 9:14 AM
Page 21
When you connect to HDMI Out
Best Quality
Connect if the TV has an HDMI (or DVI) In jack.
Connect the HDMI Out to the HDMI
(or DVI) Input on the TV.
2
Set the Video Input source on your TV
to the corresponding HDMI output on
your Home Theater.
or
HDMI/DVI Cable
(supplied)
HDMI Cable
(supplied)
What is HDMI (High Definition Multimedia Interface)?
This device transmits DVD video and audio signals digitally without the process of
converting to analog. You can get sharper digital pictures by connecting the video to
the TV using an HDMI connection cable.
Note
• If you connect the HDMI and Component outputs (PR, PB, Y) at the same time, the Component output
•
•
•
•
•
•
•
resolution changes automatically to the designated HDMI resolution.
Example: If the TV connected to HDMI can only support up to 576p(480p), the HDMI and Component outputs
are all converted to 576p(480p), even if you select the resolution switch to 1080i.
Since this product has an embedded Video Upscaler function with Faroudja DCDi technology, it can enhance a
576i(480i) DVD resolution output to 576p(480p)/720p/1080i.
You do not have to make separate adjustments, since the Home Theater and TV will be automatically adjust
themselves to the optimal resolution and aspect ratio if connected to HDMI. (If the TV is an HDTV and has an
HDMI Input jack, output is automatically converted to the resolution of 1080i.)
Audio will not be output if decoder is not embedded in TV during 5.1 channel disk playback.
Component output will give video in ‘576p(480p)’ mode only during DVD disc playback applied with
Macrovision.
Macrovision processes scramble on analog output to prevent illegal recording. Accordingly, if you are using
HDMI only, it can output 576p(480p)/720P/1080i, but is limited to 576p(480p) only if you are using component.
When both HDMI connector and COMPONENT connector are connected, COMPONENT video is not
displayed.
See your TV owner's manual for more information on how to select the TV's Video Input source.
18
CONNECTIONS
1
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 22
Connecting the Video Out to TV
Selecting Resolution
You can adjust the resolution switch to set the HDMI and component (PR, PB, Y) output resolution to
576p(480p)/720p/1080i.
Example: If the TV supports resolution up to 576p(480p)
1
Set the resolution switch to 576p(480p).
• A 576p(480p) video signal is output through the HDMI and component outputs (PR, PB, Y).
Caution
• If you connect the HDMI and Component outputs (PR, PB, Y) at the same
time, Component output resolution changes automatically to the
designated HDMI resolution.
Note
• If copy protection is in place, output resolution is automatically converted to 576p(480p) when you play the
DVD, even if you set the resolution to 720p or 1080i.
19
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 23
DCDi (Directional Correlational Deinterlacing) Function
Press and hold DCDi button on the remote
control for over 3 seconds.
• Each time the button is pressed, the selection alternates between
DCDi ON and DCDi OFF.
20
CONNECTIONS
Converts the interlace signal to progressive to prevent flickering and to
remove distortion or noise on the edge of screen.
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 24
Connecting External Components
Connecting an External Digital Component
Example: Digital signal components such as a Settop Box or CD Recorder.
Optical Cable
(not supplied)
1
Connect the Digital In 1 or 2 (OPTICAL) on the main unit to the Digital Output on the
external digital component.
2
Press AUX on the remote control to select ‘D.IN 1 or D.IN 2’.
• Each time the button is pressed, the selection changes as follows: D.IN 1 ➝D.IN 2 ➝AUX.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ D.IN 1 ➝D.IN 2 ➝ AUX ➝ FM.
Cooling Fan
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
21
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 25
Connecting an External Analog Component
CONNECTIONS
Example: Analog signal components such as a VCR or TV.
Audio Cable (not supplied)
If the external analog component has only one Audio
Out, connect either left or right.
L
R
1
Connect Audio In on the main unit to Audio Out on the external analog component.
2
Press AUX on the remote control to select AUX.
• Be sure to match connector colors.
• Each time the button is pressed, the selection changes as follows: D.IN 1 ➝D.IN 2 ➝AUX.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ D.IN 1 ➝D.IN 2 ➝ AUX ➝ FM.
Note
• To listen TV sound in 5.1 channel sound through the main unit, connect the Audio In on the
main unit to the Audio Output on the TV.
• You can connect Video Output jack on the VCR to the TV, and connect Audio Output jack on
the VCR to this product.
22
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 26
Connecting the FM Antenna
FM antenna connection
1
Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary
measure.
2
Slowly move the antenna wire around until you find a location where reception is
good, then fasten it to a wall or other rigid surface.
Selecting the Video Format
Press and hold NTSC/PAL button on the remote controller for over 5 seconds while the power is turned off.
• "NTSC" or "PAL" will appear in the display.
At this time, press the NTSC/PAL button shortly to select between "NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the video format of your TV.
23
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 27
Before Using Your DVD Player
Your DVD player is capable of playing DVD, VCD, CD, MP3 and JPEG discs.Depending on the disc
you are using, these instructions may vary slightly. Read the instructions carefully before using.
2
Press the MODE button
so that the TV indicator
on the remote control
flashes.
TV
4
Press TV/VIDEO
button to select
VIDEO mode.
5
3
Press the POWER
button to turn on
the TV.
6
Press DVD button
to select DVD/CD
mode.
DVD RECEIVER
Press the MODE button so
that the DVD RECEIVER
indicator on the remote
control flashes.
TV
DVD RECEIVER
To Operate the TV and DVD Player with a Single Remote Control
Press MODE button.
• Each time the button is pressed, the TV indicator (red) and the DVD Receiver indicator (green) will flash alternately.
• You can operate the TV while the TV indicator is flashing and the DVD player while the DVD indicator is flashing.
• Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO and Numeric (0-9) buttons.
• By default, the remote control is set to work with Samsung TVs.
See page 77 for more information on the operation of the remote control.
Note
• If you move the product during playback, the disc may be damaged.
• If you push the disc window up or down by hand, it may cause a breakdown.
• Do not let children insert their fingers into the unit.
24
CONNECTIONS
1
Plug the power
cord into the AC
power supply.
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 28
Disc Playback
1
Press OPEN/CLOSE button to open the
disc tray.
2
Insert the disc so that the printed side
faces up.
3
Press OPEN/CLOSE button to close the disc
window.
• The disc plays automatically when the disc window is closed.
• The disc menu may appear differently depending on the disc.
DVD
VCD
CD
• Playback starts automatically.
Note
• Depending on the content of the disc, the initial screen
may appear different.
To stop playback,
press STOP during playback.
• If pressed once, “PRESS PLAY” is displayed and the
•
stop position will be stored in memory. If PLAY/PAUSE
(
) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE (
) button is pressed, playback
starts from the beginning.
25
To temporarily pause playback,
press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE (
button again.
)
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 29
Disc terminology
Groups and tracks (DVD-AUDIO)
• DVD-audios is divided into several large sections called "groups" and smaller
sections called "tracks". Numbers are allotted to these sections.
These numbers are called "group numbers" and "track numbers".
GROUP 1
TRACK 1
TRACK 2
GROUP 2
TRACK 3
TRACK 1
TRACK 2
OPERATION
Titles and chapters (DVD-VIDEO)
• DVD-videos is divided into several large sections called "titles" and smaller
sections called "chapters". Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
TITLE 1
CHAPTER 1
CHAPTER 2
TITLE 2
CHAPTER 3
CHAPTER 1
CHAPTER 2
Tracks (Video and music CDs)
• Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called "track numbers".
TRACK 1
Note
TRACK 2
TRACK 3
TRACK 4
TRACK 5
• In this manual, the instructions marked with "DVD (
DVD
)" are applicable
to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
• Depending on the content of the disc, the initial screen may appear different.
26
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 30
MP3-CD Playback
Data CDs (CD-R, CD-RW) encoded in MP3 format can be played.
1
Press the
OPEN/CLOSE button
to open the disc tray,
and then load the
MP3 disc.
2
In Stop mode, use
to select
the album, and then
press the ENTER
button.
4
Press the STOP
button to stop
playback.
• The MP3 menu screen will appear and
playback will start.
• Depending on the MP3 disc, the
appearance of the menu may be different.
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
3
To change the album,
use
to
select another album
in Stop mode, and
then press the
ENTER button.
• To select another album and track,
repeat Steps 2 and 3 above.
Note
• Depending on the recording mode, some MP3-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3 track format
recorded on the disc.
27
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 31
JPEG Disc Playback
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then
played back with this unit.
Press the OPEN/CLOSE button to open the disc windows, and
then load the JPEG disc.
• Playback will start automatically and each image will show for 5 seconds before moving to
the next image.
OPERATION
To rotate the image
During playback, press
.
Rotate vertically
Rotate 90° counterclockwise
Rotate horizontally
Rotate 90° clockwise
28
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 32
DivX Playback
Skip Forward/Back
During playback, press the
button.
• Go to the next file whenever you press
button, if there are over
2 files in the disk.
• Go to the previous file whenever you press
button, if there are over
2 files in the disk.
Fast playback
Press and hold
•
button.
Each time the button is held down during playback,
the playback speed changes as follows:
Zoom Function
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
• Each time you press the button,
your selection will toggle between
“ZOOM X2” and “ZOOM OFF”.
29
Note
• DIVX file can be zoomed
only in ZOOM X2 mode.
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 33
5 Minute Skip function
During playback, press the
,
button.
• Go to the screen about 5 minutes after whenever you press
• Go to the screen about 5 minutes earlier whenever you press
button.
button.
Subtitle Display
Press the SUBTITLE button.
• Each time you press the button, your selection will toggle between “SUBTITLE ON” (1/1, 1/2 ...) and
“SUBTITLE OFF”.
• If the disc has only one subtitle file, it will be played automatically.
If the disc has more than one subtitle file, the default subtitle may not match the movie and you will have
select your subtitle language as follows:
1
2
In Stop mode, press the , , , button, select the desired
subtitle (
) from the TV screen, and then press the ENTER button.
When you select the desired DivX file from the TV screen, the
movie will be played normally.
DivX Feature Table
DivX Supported
Avi files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format.
SPEC
DivX3.11
VIDEO Compatibility WMV
Up to the latest VERSION
WMV V1/V2/V3/V7
Screen Size 720~576
MP3
AUDIO Compatibility AC3
WMA
Note
CBR : 80kbps~320kbps
CBR : 128kbps~384kbps
CBR : 56kbps~160kbps
MPEGs containing DivX can be divided into Video and Audio.
• Video compatibility : All versions of DivX later than 3.11 (including
the latest 5.1) are supported. In addition, XviD is supported.
For WMV, V1, V2, V3, and V7 formats are possible.
• Audio compatibility : MP3s encoded at bitrates from 80kbps to
320kbps, AC3s from 128kbps to 384kbps, and WMAs from 56kbps
to 160kbps are supported.
• In addition, for subtitles, this unit will support Text format (SMI).
• When playing the DivX disk, you can play the file with extension of AVI only.
• Among the available DivX audio formats, DTS Audio is not supported.
• WMV V8 is not supported for WMV files.
• When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file.
• DivX Disc does not playing when its sampling frequency is lower than 32kHz.
• Some of the discs recorded in DivX or XviD depending on the way of recording could be
played back not correctly or couldn't be played back at all.
30
OPERATION
If the disc has more than one subtitle file
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 34
Displaying Disc Information
You can view disc playback information on the TV screen.
Press INFO button.
• Each time the button is pressed, the display changes as follows:
DVD
VCD
CD
MP3
DivX
DVD RECEIVER
JPEG
SMART NAVI
Something like you
Back for good
Love of my life
More than words
Display disappears
•
Display disappears
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
Display disappears
• What is a Group?
A movie contained in a DVD-AUDIO disc.
Note
• What is a Title?
• Depending on the disc, the disc
•
A movie contained in a DVD-VIDEO disc.
information display may appear different.
Depending on the disc, you can also
select DTS, DOLBY DIGITAL, or PRO
LOGIC.
• What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called "chapters".
• What is a Track (File)?
A section of video or a music file recorded on a DVD-AUDIO, CD, or MP3-CD.
Screen Display
DVD display
VCD display
DivX display
DVD DVD-AUDIO display
AUDIO
CD display
TITLE display
MP3 CD display
GROUP display
31
CHAPTER display
REPEAT PLAYBACK display
STEREO (L/R) display
TRACK (FILE) display
AUDIO LANGUAGE display
DOLBY DIGITAL display
ELAPSED TIME display
SUBTITLE display
ANGLE display
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 35
Checking the Remaining Time
Press the REMAIN button.
• For checking the total and remaining time of a title or chapter
being played.
Each time the REMAIN button is pressed
DVDVIDEO
DVDAUDIO
GROUP ELAPSED
TITLE REMAIN
GROUP REMAIN
CHAPTER ELAPSED
TRACK ELAPSED
CHAPTER REMAIN
TRACK REMAIN
VCD
CD
MP3
TRACK ELAPSED
TRACK REMAIN
TRACK REMAIN
TRACK ELAPSED
TOTAL ELAPSED
TOTAL REMAIN
32
OPERATION
TITLE ELAPSED
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 36
Fast/Slow Playback
Fast Playback
Press and hold
DVD
VCD
CD
MP3
.
• Each time the button is held down during playback,
the playback speed changes as follows:
Slow Playback
Press SLOW button.
• Each time the button is pressed during playback,
the playback speed changes as follows:
DVD
VCD
Note
• Reverse slow playback does not work
with VCD and DivX.
33
DivX
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 37
Skipping Scenes/Songs
DVD
VCD
MP3
Briefly press
.
• Each time the button is pressed briefly during playback, the previous or next chapter,
track, or directory (file) will be played.
DVD
VCD
MP3
TITLE 01/05 CHAPTER 002/040
DVD RECEIVER
SMART NAVI
DVD RECEIVER
OPERATION
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
TITLE 01/05 CHAPTER 004/040
DVD RECEIVER
SMART NAVI
Something like you
Back for good
Love of my life
More than words
I need you
My love
Uptown girl
• When watching a VCD with a track
longer than 15 minutes, each time
is pressed, playback
will skip back or forward 5 minutes.
Note
• During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x, 8x, and 32x speeds.
• No sound is heard during slow playback and step motion playback.
34
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 38
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
VCD
CD
MP3
JPEG
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback
mode changes as follows:
DVDVIDEO
MP3
35
JPEG
DVDAUDIO
VCD
CD
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 39
To Select a Repeat Playback Mode in the Disc Information Screen
Press INFO button twice.
2
Press Cursor
button to move to
REPEAT PLAYBACK(
) display.
3
Press Cursor button to select the
desired Repeat Playback mode.
4
Press ENTER button.
DVD
OPERATION
1
VCD
CD
* For MP3 and JPEG discs, you cannot select Repeat
Play from the information display screen.
Repeat Playback Options
• CHAPTER : Repeatedly plays the selected chapter.
• TITLE : Repeatedly plays the selected title.
• GROUP : Repeatedly plays the selected group.
• RANDOM : Plays tracks in random order.
(A track that has already been played may be played again.)
• TRACK : Repeatedly plays the selected track.
• DIR : Repeatedly plays all tracks in the selected folder.
• DISC : Repeatedly plays the entire disc.
• OFF : Cancels Repeat Playback.
Note
• Repeat playback operation is not possible with version 2.0 VCD discs if PBC is turned
on. To use Repeat Playback on a VCD with PBC, you should set the PBC to OFF in the
disc menu. (See page 43.)
36
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 40
A-B Repeat Playback
DVD
1
VCD
CD
Press INFO button
twice.
2
Press Cursor
button to move to
REPEAT PLAYBACK
(
) display.
4
Press ENTER
button at the end
of the desired
segment.
• For a VCD or CD, press INFO
button once.
3
Press Cursor ,
buttons to select ‘A-’ and
then press ENTER
button at the beginning of
the desired segment.
• When ENTER button is pressed,
the selected position will be stored
in memory.
• The specified segment will be
played repeatedly.
A-
A-B
REPEAT : A—B
A -?
REPEAT : A—
To return to normal playback, press Cursor
buttons to select
OFF.
,
Note
• The A-B Repeat function will not work on an MP3 or JPEG disc.
37
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 41
Angle Function
This function allows you to view the same scene in different angles.
DVD
1
Press INFO button.
2
Press Cursor button
to move to ANGLE
(
) display.
1/3
1/3
OPERATION
3
Press Cursor ,
desired angle.
or numeric buttons to select the
• Each time the button is pressed, the angle changes as follows:
1/3
2/3
3/3
Note
• The Angle function works only with discs on which multiple
angles have been recorded.
38
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 42
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
1
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area you
want to enlarge.
DVD
3
VCD
Press ENTER
button.
• Each time the button is pressed, the
zoom level changes as follows:
SELECT ZOOM POSITION
Aspect Ratio
DVD
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Widescreen format, black bars at the top and
bottom of the TV screen can be removed by pressing the EZ VIEW button.
EZ VIEW
EZ VIEW OFF
Note
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
39
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 43
Bonus Group / Navigating Pages
Bonus Group
DVDAUDIO
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key
number to access. See the disc packaging for details and the-key number.
When you play a DVD-Audio disc that has a
bonus group, the key number input screen
appears automatically.
OPERATION
BONUS GROUP
KEY NUMBER :
Note
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
the key number.
Navigating Pages
During playback, press the
the remote control.
DVDAUDIO
button on
• You can select the desired image from a DVD-Audio disc containing still images.
• With some discs, you may not be able to select images depending on how the
disc was manufactured.
40
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 44
Selecting Audio/Subtitle Language
Audio Language Selection Function
1
Press INFO button
twice.
2
DVD
Press Cursor ,
buttons or numeric
buttons to select the
desired audio language.
• Depending on the number of languages on a
DVD disc, a different audio language
(ENGLISH, SPANISH, FRENCH, etc.) is
selected each time the button is pressed.
SP 2/3
FR 3/3
Subtitle Language Selection Function
1
Press INFO button
twice.
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
EN 1/3
EN 01/ 03
2
DVD
Press Cursor
button to move to
SUBTITLE (
)
display.
OFF
SP 02/ 03
FR 03/ 03
OFF / 03
41
Note
• You can use the SUBTITLE button
•
on the remote control to select a
subtitle language.
Depending on the disc, the Subtitle
and Audio Language functions may
not work.
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 45
Moving Directly to a Scene/Song
DVD
1
VCD
CD
Press INFO button.
01/05
001/040
0:00:37
MP3
025/040
0:00:01
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
Press Cursor ,
buttons to move to
Chapter ( )
display.
2
03/05
001/002
0:00:01
3
01/05
1/1
Moving to a Specific Time
5
1/1
025/040
1:17:30
0:00:01
1/1
Moving to a Specific Time
Press Cursor ,
buttons to move to
time display.
01/05
001/040
6
1/1
Press the numeric
buttons to select the
desired time and then
press ENTER button.
01/05
028/040
1:30:00
1/1
JPEG
Press the numeric
buttons.
• The selected file will be played.
• An MP3 or JPEG disc cannot be moved
from the disc information screen.
Note
• You can press
•
on the
remote control to move directly to the
desired title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title
or time.
• When playing an MP3 or JPEG disc, you
cannot use
,
to move a folder.
To move a folder, press (Stop) and
then press
, .
42
OPERATION
Press Cursor ,
buttons or numeric buttons
to select the desired
chapter and then press
ENTER button.
01/05
Moving to a Chapter
1/1
Moving to a Chapter
4
Moving to a Title/Track
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 46
Using Disc Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
1
In Stop mode,
press MENU
button.
• When playing a VCD (version 2.),
this toggles between PBC ON and
OFF.
3
Press Cursor ,
, buttons to
select the desired
item.
2
Press Cursor ,
buttons to move to
‘DISC MENU’ and then
press ENTER button.
• When you select the disc menu that is not
supported by the disc, the "This menu is not
supported" message appears on the screen.
4
Press ENTER
button.
Note
PBC (Playback Control) Function
Press the MENU button while VCD 2.0 version disk is played.
Each time you press the button, "PBC ON" and "PBC OFF" will be repetitively selected in the TV screen.
• PBC ON: This VCD disc is version 2.0. The disc is played back according to the menu screen.
Some functions may be disabled. When some functions are disabled, select "PBC OFF" to enable them.
• PBC OFF: This VCD disc is version 1.1. The disc is played back in the same way as with a music CD.
43
1p~44p(DS1000)-GB
9/16/04 9:15 AM
Page 47
Using the Title Menu
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
1
In Stop mode,
press MENU
button.
2
Press Cursor ,
button to move to
‘Title Menu’.
3
Press ENTER
button.
• The title menu appears.
OPERATION
Press MENU button to exit the setup screen.
44
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 46
Setting the Language
OSD language is set to English by default.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
45
45P~84P(DS1000)-GB
3
9/16/04 9:16 AM
Press ENTER
button.
Page 47
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
5
Press Cursor ,
button to select the
desired language and then
press ENTER button.
• Once the setup is complete, if the language was
set to English, OSD will be displayed in English.
SETUP
Selecting the
OSD Language
Selecting the
Audio Language
(recorded on the disc)
Selecting the
Subtitle Language
(recorded on the disc)
Selecting the Menu Language
(recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
46
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 48
Setting TV Screen type
Depending on your TV type (Wide Screen TV or conventional 4:3 TV), you can select the
TV's aspect ratio.
1
In Stop mode,
press MENU
button.
3
Press Cursor
button to move to ‘TV
DISPLAY’ and then
press ENTER button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
4
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
be taken to the previous screen.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
47
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 49
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
✱ For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a wide screen TV.
WIDE
: Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
• You can enjoy the wide screen aspect.
4:3LB
(4:3 Letterbox)
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
SETUP
4:3PS
(4:3 Pan&Scan)
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
Note
• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
48
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 50
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1
49
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
45P~84P(DS1000)-GB
3
9/16/04 9:16 AM
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
Page 51
4
Press Cursor , button
to select the desired rating
level and then press
ENTER button.
• If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
content is to violent or adult material.
5
Enter the password
and then press
ENTER button.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
SETUP
Note
• This function works only if a DVD disc contains the rating level information.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
50
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 52
Setting the Password
You can set the password for the Parental (rating level) setting.
1
Note
51
Press MENU button.
2
• The password is set to "7890" by default.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
45P~84P(DS1000)-GB
3
9/16/04 9:16 AM
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
Page 53
4
Press ENTER
button.
5
Enter the password
and then press
ENTER button.
• Enter the old password, a new
password, and confirm new password.
• The setting is complete.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
52
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 54
Setting the Wallpaper
JPEG
DVD
VCD
While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when an image you
like appears.
2
Press LOGO
button.
• “COPY LOGO DATA” will be
displayed on the TV screen.
COPY LOGO DATA
PAUSE
3
The power will turn off
and then back on and
the disc tray will open
automatically.
• The selected wallpaper will be
displayed.
4
Press OPEN/
CLOSE to close
the disc tray.
• You can repeat Steps 1 and 2 to
set up to 3 wallpapers.
Select this to set the
Samsung Logo image as
your wallpaper.
53
Select this to set the desired
image as your wallpaper.
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 55
To Change the Wallpaper
4
Press to select
the desired ‘USER’,
and then press
ENTER.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
5
Press MENU
button to exit the
setup screen.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
SETUP
1
In Stop mode,
press MENU
button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
54
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 56
DVD Playback Mode
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
1
Press the MENU
button while the
disc tray is open.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Note
• DVD Play mode is set to DVD Audio as factory default setting.
55
45P~84P(DS1000)-GB
3
9/16/04 9:16 AM
Press Cursor button
to move to ‘DVD
TYPE’ and then press
ENTER button.
Page 57
4
Press Cursor ,
button to move to
‘DVD VIDEO’ and then
press ENTER button.
• Set steps 1 ~ 4 again if you want to
switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
• DVD VIDEO : set to play the DVD video
SETUP
•
contents contained in DVD
audio disc.
DVD AUDIO : set to play the default DVD
audio.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
56
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 58
Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted
according to your speaker configuration and whether certain speakers are used or not.
1
3
In Stop mode,
press MENU
button.
In the Speaker
Setup, press the
ENTER button again.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
• For C, LS, and RS, each time the button
•
is pressed, the mode switches
alternately as follows: SMALL ➝ NONE.
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
Note
• Depending on PRO LOGIC and STEREO, the speaker mode may vary.
57
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 59
Setting the Test Tone
Use the Test Tone feature to check the speaker connections and to adjust the speaker levels.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
• The test tone will be sent to L ➝ C ➝
R ➝ RS ➝ LS ➝ SW in that order.
If the ENTER button is pressed again
at this time, the test tone will stop.
SETUP
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote.
Press TEST TONE button.
•
•
Test tone will be produced as follows:
When playing a DVD or CD, this will work
only in Stop mode.
Use this function to check that each speaker is
correctly connected and that there is no problem.
To end the test tone,
press TEST TONE button again.
L: Front Speaker (L)
R: Front Speaker (R)
C: Center Speaker
LS: Rear Speaker (L)
SW: Subwoofer
RS: Rear Speaker (R)
Multi-Channel Pro Logic Mode
Start
58
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 60
Setting the Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the
delay time of the audio signals from the center and rear speakers.
1
In Stop mode,
press MENU
button.
2
Press Cursor button
to move to ‘Audio’ and
then press ENTER
button.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if
the distance between you and each speaker is the same. Since the sounds
arrive at the listening position at different times depending on the
placement of speakers, you can adjust this difference by adding a delay
effect to the sound of the Center Speaker and Surround Speakers.
Note
(Dolby Pro Logic II), the delay time may be different for each mode.
• With
• With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.
59
45P~84P(DS1000)-GB
3
9/16/04 9:16 AM
Press Cursor button
to move to ‘DELAY
TIME’ and then press
ENTER button.
Page 61
4
Press Cursor , ,
, buttons to move
to the desired
speaker and then
press ENTER button.
5
Press Cursor ,
to set the Delay
time.
• You can set the delay time for C
between 00 and 05mSEC and for
LS and RS between 00 and
15mSEC.
SETUP
• Setting CENTER SPEAKER
If the distance of Dc is equal to or longer than the
distance of Df in the figure, set the mode as 0ms.
Otherwise, change the setting according to the table.
Distance between Df and Dc
0.00 m
0.34 m
0.68 m
1.02 m
1.36 m
1.70 m
Delay Time
0 ms
1 ms
2 ms
3 ms
4 ms
5 ms
• Setting REAR (SURROUND) SPEAKERS
If the distance of Df is equal to the distance of Ds
in the figure, set the mode as 0ms. Otherwise,
change the setting according to the table.
Distance between Df and Ds
0.00 m
1.02 m
2.04 m
3.06 m
4.08 m
5.10 m
Ideal CENTER
SPEAKER placement
Delay Time
0 ms
3 ms
6 ms
9 ms
12 ms
15 ms
Ideal
SURROUND
SPEAKER
placement
It is desirable to place all speakers within this circle.
Df: The distance from FRONT SPEAKER
Dc: The distance from CENTER SPEAKER
Ds: The distance from SURROUND SPEAKER
60
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 62
Setting the Audio Quality
You can adjust the balance and level for each speaker.
Method 1
When adjusting the audio quality using the setup screen
1
In Stop mode,
press MENU
button.
3
Press Cursor button
to move to ‘SOUND
EDIT’ and then press
ENTER button.
2
Press Cursor
button to move to
‘Audio’ and then press
ENTER button.
4
Press Cursor ,
buttons to select and
adjust the desired item.
Press the , buttons
to adjust the settings.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
61
45P~84P(DS1000)-GB
Method 2
9/16/04 9:16 AM
When manually adjusting with the SOUND EDIT button
Adjusting Front Speaker Balance
1
Page 63
Press SOUND
EDIT button and
then press Cursor
, .
Adjusting Rear Speaker Balance
Adjusting Center Speaker Level
Press SOUND
EDIT button and
then press Cursor
, .
Press SOUND
EDIT button and
then press Cursor
, .
2
3
Adjusting Rear Speaker Level
Note
SETUP
4
Press SOUND
EDIT button and
then press Cursor
, .
• The adjustments will appear on the main unit, not on your TV screen.
Adjusting Front/Rear Speaker Balance
• You can select between 00 and –06 and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Rear/Subwoofer Speaker Level
• You can adjust volume level from -6dB to +6dB.
• The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.
62
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 64
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor
button to move to
‘DRC’ and then press
ENTER button.
4
Press Cursor
to adjust the
‘DRC’.
,
• Pressing the Cursor
button
increases the compression, and
pressing the Cursor
reduces it.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
63
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 65
AV SYNC Setup
Video may lag behind the audio if the unit is connected to a digital TV.
If this occurs, adjust the audio delay time to sync up with the video.
1
Press the MENU button.
• Setup menu appears.
• AV-SYNC screen appears.
• 'Audio' menu appears.
4
Press Cursor
, buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
• You can set the audio delay time between 0 ms and
300 ms. Set it for the best sync up with audio.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
64
SETUP
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 66
Dolby Pro Logic II Mode
You can select the desired Dolby Pro Logic II audio mode.
Press
PL II MODE button.
• Each time the button is pressed, the mode changes as follows.
PRO LOGIC II
• MUSIC : When listening to music, you can experience sound effects as if you are
•
•
•
•
listening to the actual performance.
CINEMA : Adds realism to the movie soundtrack.
PRO LOGIC : You will experience a realistic multi-channel effect, as if using five
speakers, while using just the front left and right speakers.
MATRIX : You will hear 5.1 channel surround sound.
STEREO : Select this to listen to sounds from the front left and right
speakers and the subwoofer only.
Note
• When selecting Pro Logic II mode, connect your external device to the
AUDIO INPUT jacks (L and R) on the player. If you connect to only one of
the inputs (L or R), you cannot listen to 5.1 channel surround sound.
65
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 67
Dolby Pro Logic II Effect
This function works only in Dolby Pro Logic MUSIC mode.
1
Press
PL II MODE
button to select ‘MUSIC’
mode.
2
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select either 0 or 1.
CMX
MPEG-2 AAC
CMX
MPEG-2 AAC MPEG
• You can select between 0 and 7.
4
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
• You can select between 0 and 6.
DSP
CMX
MPEG-2 AAC MPEG
Note
TA
CMX
TUNED
MPEG-2 AAC MPEG
• When playing a DVD disc encoded with two or more channels, multi-channel mode will be
selected automatically and
(Dolby Pro Logic II) button does not work.
• PANORAMA: This mode extends the front stereo image to include the surround speakers for
an exciting "wraparound" effect with side wall imaging.
• CENTER WIDTH: Sound is output to the center speaker only. The front left and right speakers
produce phantom sound.
• DIMENSION: Incrementally adjusts the sound field (DSP) from the front or rear.
66
SETUP
3
Press
PL II EFFECT button
and then press Cursor ,
buttons to select the mode.
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 68
Auto Sound Calibration Setup
* This function is available only for DVD/CD playback.
Auto Sound Calibration
By setting the auto sound calibration function just once when you relocate or install the unit, you can have
the unit automatically recognize the distance between speakers, levels between channels, and frequency
characteristics to create 5.1-channel sound field optimized for the listener's environment.
* The following images are for illustrative purposes only and may differ from the actual product.
Auto Sound Calibration
Microphone
L: Front Speaker (L)
C: Center Speaker
LS: Rear Speaker (L)
Note
R: Front Speaker (R)
SW: Subwoofer
RS: Rear Speaker (R)
• If you purchased the unit for the first time or initialized it, pressing the Auto Sound Calibration button without
•
•
connecting the auto sound calibration microphone will display the message "PLEASE SET ASC FUNCTION FIRST"
in the display.
Because the volume level of the tone is fixed during the auto sound calibration setup, you cannot adjust the volume
using the volume control buttons.
If the auto sound microphone is disconnected during the auto sound calibration setup, the setup will be cancelled.
To Turn the Sound Logo On/Off
When you turn on the power, the unit produces a sound logo after
the disc is read to notify that the unit is optimized for playback.
1
Press and hold ASC button.
• "S.LOGO ON" or "S.LOGO OFF" appears in the display.
press ASC button.
2 Briefly
Each
time
the button is pressed, the selection alternates
•
67
•
between S.LOGO ON and S.LOGO OFF.
If you select "S.LOGO ON", a sound logo will be output
when the disc reading is finished after power-on. If you
select "S.LOGO OFF", no sound logo will be output.
To Verify the Auto Sound Calibration
1
Press and hold ASC button twice.
• "ASC CHECK" appears in the display.
press ASC button.
2 Briefly
• Distance and level values specified for
each channel will appear in the display.
45P~84P(DS1000)-GB
9/16/04 9:16 AM
1
2
3
Page 69
Plug the auto sound calibration
microphone into the auto sound
calibration input jack.
Place the auto sound calibration
microphone at the listener's position.
Adjust the volume control on the main
unit as follows:
• If the distance between the listener and the speaker is over 5 m:
Set the main unit's volume to over 25.
• If the distance between the listener and the speaker is 3 to 5 m:
Set the main unit's volume to 25.
• If the distance between the listener and the speaker is below 3 m:
Set the main unit's volume to 15.
4
Press ASC button.
• The tone will be output twice, in the given order (L ➝ C ➝ R ➝ RS
•
➝
LS ➝ SW), and 5.1-channel sound field is optimized automatically.
The auto sound calibration setup takes about 2 minutes to complete.
A tone is output.
5
A result for each speaker is displayed.
When the message "REMOVE MIC"
appears in the display, unplug the auto
sound calibration microphone.
To cancel the auto sound calibration setup, press ASC button.
• The tone output stops, "CANCEL ASC" appears in the display followed by "REMOVE MIC", and the setup is cancelled.
To listen in the auto sound calibration mode, briefly press ASC button.
• The selection alternates between ASC ON and ASC OFF in the display.
• If you select "ASC ON", you will hear sound in the auto sound calibration mode.
If you select "ASC OFF", you will hear sound in the mode set in the audio setting of the setup screen.
68
SETUP
A bell sounds and the
setup finishes.
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 70
Live Surround Mode
SUPER 5.1
You can reproduce a 2-channel sound source, such
as CD, and radio broadcast, in 5.1-channel
surround sound.
Press SUPER5.1
button.
• Each time the button is pressed, the
•
selection alternates between SUPER
5.1 and SUPER OFF.
Select "SUPER 5.1" to play 2-channel
sound in 5.1 channels.
Note
MUSIC
MOVIE
If you press the MUSIC button when listening to a
You can select from 3 different modes of sound
2-channel sound source, it will be reproduced in
field for movies.
5.1-channel surround sound so that you can enjoy a
dynamic sound with a sense of presence.
Press MUSIC button.
• Each time the button is pressed,
the selection changes as follows:
LIVE ➝ JAZZ ➝ ROCK ➝
CLASSIC ➝ DISCO ➝ LSM OFF.
Press MOVIE
button.
• Each time the button is pressed, the
selection changes as follows:
CINEMA ➝ STADIUM ➝ LSM OFF.
• When you insert a DVD recorded in 2-channel or multi-channel format and press the
SUPER 5.1 button, the message "THIS FUNCTION APPLIES ONLY 2CH SOURCE"
appears in the display and it will not work.
69
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 71
Virtual Headphone Function
Use headphones (not supplied) for private listening pleasure.
You can enjoy a dynamic sound effects similar to that of 5.1 channel
surround sound using conventional stereo headphones.
1
Plug the
headphones into the
headphone jack.
• You can purchase headphones
from most Electronics stores.
2
Press V-H/P
button.
• Each time the button is pressed, the
selection alternates between V-H/P
ON and V-H/P OFF.
SETUP
Note
• Do not listen at extremely high volume levels when using headphones.
Extended, high-volume listening can lead to permanent hearing loss.
• VIRTUAL HEADPHONE ON: Select to enjoy a 5.1-channel surround sound that
•
gives the feeling of being in a baseball park or
concert hall.
VIRTUAL HEADPHONE OFF: Select to listen to a standard 2-channel stereo
sound.
70
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 72
Listening to Radio
You can listen to the chosen band (FM broadcast stations) by using either the
automatic or manual tuning operation.
Remote Control Unit
1
Press TUNER
button.
• The selection toggles back
and forth between "FM" each
time the TUNER button is
pressed.
2
Tune in to the
desired station.
Automatic Tuning 1
Automatic Tuning 2
Manual Tuning
When
is pressed, a
preset broadcast station is
selected.
Press and hold
to
automatically search for
active broadcasting stations.
Briefly press
to
increase or decrease the
frequency incrementally.
Main Unit
1
Press the Function
button to select the
desired band (FM).
2
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the STOP ( ) button
to select "MANUAL" and
then press and hold
button to
automatically search the band.
Automatic Tuning 2
STOP ( ) to select
Manual Tuning Press
MANUAL and then briefly
press
to tune in to a lower or
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
71
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 73
Presetting Stations
You can store up to: 15 FM stations
Example: Presetting FM 89.1 in the memory
1
Press the TUNER
button and select
the FM band.
2
3
Press
to
select "89.10".
• Refer to Step 2 on page 71 to
• “PRGM” flashes in the
automatically or manually tune in
to a station.
4
Press
to select preset
number.
15.
Press the TUNER
MEMORY button
again.
display. Tune in to a station.
6
To preset another
station, repeat
steps 2 to 5.
• Press the TUNER MEMORY button before
RADIO OPERATION
• You can select between 1 and
5
Press the TUNER
MEMORY button.
‘PRGM’ disappears from the display.
• ‘PRGM’ disappears from the display and
the station is stored in memory.
To tune in to a preset station, press
remote control to select a channel.
on the
72
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 74
About RDS broadcasting
Using the RDS (Radio Data System) to receive FM stations
RDS allows FM stations to send an additional signal along with their regular program signals. For
example,the stations send their station names,as well as information about what type of program they
broadcast, such as sports or music,etc.
When tuned to an FM station which provides the RDS service,the RDS indicator
lights up on the display.
• Description on RDS function
1. PTY (Program Type) : Displays the type of programme currently being broadcast
2. PS NAME (Program Service Name) : Indicates the name of broadcasting station
and is composed of 8 characters.
3. RT (Radio Text) : Decodes the text broadcast by a station (if any) and is composed
of maximum 64 characters.
4. CT (Clock Time) : Decodes the real time clock from the FM frequency.
• Some stations may not transmit PTY, RT or CT information therefore this may not be
displayed in all cases.
5. TA (Traffic Announcement) : When this symbol flashes it shows that the traffic
announcement is in progress.
Note
• RDS is not available for AM broadcasts.
• RDS may not operate correctly if the station tuned is not transmitting
RDS signal properly or if the signal strength is weak.
What information can RDS signals provide?
You can see the RDS signals the station sends on the display.
TO show the RDS signals
Press RDS DISPLAY while listening to an FM station.
Each time you press the button, the display change to show you the following information:
PS (Program Service) :While searching,"PS"appears and then the station names will be
displayed."NO PS" appears if no signal is sent.
RT(RadioText) : while searching,"RT"appears and then text messages the station sends
will be displayed. "NO RT"appears if no signal is sent.
Frequency : station frequency (non-RDS service)
About characters shown in the display
When the display shows PS,or RT signals,the following characters are used.
• The display window cannot differentiate upper case and lower case lrtters and always
uses upper case letters.
• The display window cannot show accented letters, “A,” for instance, may stans for
accented “A’s” like “À, Â, Ä, Á, Åand Ã.”
Note
73
• If searching finishes at once,“PS”,and “RT” will not appear on the display.
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 75
PTY (Program Type) indication and PTY-SEARCH function
One of the advantages of the RDS service is that you can locate a particular kind of program from the
preset channels by specifying the PTY codes.
To search for a program using the PTY codes
Before you start, remember...
• The PTY Search is only applicable to preset
•
•
•
stations.
To stop searching any time during the process,
press PTY SEARCH while searching.
There is a time limit in doing the following steps.
If the setting is cancelled before you finish, start
from step 1 again.
When pressing the buttons on the primary remote
control, make sure that you have selected the FM
station using the primary remote control.
1
2
Press the PTY-or PTY+until the PTY code
you want appears on the display.
• The display gives you the PTY codes described
to the right.
Press PTY SEARCH again, while the PTY
code selected in the previous step is still on
the display.
• The center unit searches 15 preset FM
stations,stops when it finds the one you
have selected, and tunes in that station.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
• News including an announced opinion and
report
• Several matters including a current incident,
documentary, discussion and analysis.
• Information including weights and measures,
returns and forecast, matters interesting the
customer, medical information, etc.
• Sports
• Education
• Drama-Radio serial, etc.
CULTURE
• Culture-National or local culture including the
religious problem, social science, language,
theater,etc.
SCIENCE
• Natural science and technology
VARIED
• Others-Speech, amusing program (quiz,
game), interview, comedy and satirical play,
etc.
POP M
• Pop music
ROCK M
• Rock music
M.O.R.M
• Current contemporary music considered to be
“easylistening.”
LIGHT M
• Light classical music- Classical music and
instrumental and chorus music
CLASSIC
• Heavy classical music-Orchestra music,
symphony, chamber music and opera
OTHER M
• Other music - Jazz, R&B country music
WEATHER
• Weather
FINANCE
• Finance
CHILDREN
• Children’s programmes
SOCIAL A
• Social affairs
RELIGION
• Religion
PHONE IN
• Phone in
TRAVEL
• Travel
LEISURE
• Leisure
JAZZ
• Jazz Music
COUNTRY
• Country Music
NATION M
• National Music
OLDIES
• Oldies Music
FOLK M
• Folk Music
DOCUMENT
RADIO OPERATION
3
Press PTY SEARCH while listenning to an
FM station.
Program Type
Display
• Documentary
74
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 76
Convenient Functions
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
• "SLEEP" will be displayed. Each time the button is pressed
the preset time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝
90 ➝ 120 ➝ 150 ➝ OFF.
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the DVD player will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set
earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
75
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 77
Adjusting Display Brightness
Touch your hands to the front of main unit to automatically turn
on the LED and Operation Buttons.
Press DIMMER button.
• Press the DIMMIER button to toggle between DIMMER AUTO
➝ DIMMER ON ➝ DIMMER OFF on the Display.
DIMMER AUTO : Touch your hands to the operation buttons,
and it will turn on for about 5 seconds and
then turn off.
DIMMER ON : Operation buttons are always turned on.
DIMMER OFF : Operation buttons are always turned off.
Note
• In DIMMER AUTO mode, if you touch the LED buttons on the
main unit once, firstly the LED brighten,and then touch again the
function will work.
Mute Function
This is useful when answering the door or a
telephone call.
MISCELLANEOUS
Press MUTE button.
• ‘MUTE’ flash in the display.
• To switch the sound back on (at the same volume as
before), press MUTE again or the VOLUME buttons.
76
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 78
Operating a TV with the Remote Control
When operating a TV with the remote control
1
Press the MODE button to make the TV
indicator on the remote control flash.
TV
DVD RECEIVER
2
Press POWER button to turn on the TV.
3
Point the remote control toward the TV.
4
While holding down POWER, enter the code
corresponding to your brand of TV.
• If the code matches the TV's code, the TV will be turned off.
• If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
01, 02, 03, 04, and 05.
5
Pont the remote control toward the TV and press
POWER. If the TV turns off or on, the setting is
complete.
• You can use the TV POWER, VOLUME, CHANNEL, and Numeric
buttons (0~9).
Note
• The remote control may not work on some brands of TVs. Also some operations may not be
77
possible depending on your brand of TV.
• If you do not set the remote control with the code for your brand of TV, the remote control will
work on a Samsung TV by default.
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 79
TV Brand Code List
No.
Brand
Code
No.
1
SAMSUNG
00(Initial Value), 01, 02, 03, 04, 05, 73
2
ANAM
06~11, 59
3
DAEWOO
4
LG
5
HITACHI
23, 40, 41, 49
6
JVC
24, 55
7
SHARP
27, 33, 34, 35, 54
8
SONY
9
TOSHIBA
10
SANYO
27, 30, 31, 32
11
MITSUBISHI
05, 27, 28
Brand
Code
30
BRANDT
41
31
FERGUSON
41
12~18, 20, 21
32
PIONEER
41, 48, 74
05, 20, 21, 22, 53
33
TELEAVA
41
34
FINLUX
05, 42, 47
35
FISHER
31
36
AKAI
31
27, 36
37
YOKO
05
27, 37, 42, 43, 44, 46
38
PHONOLA
05, 45, 47
39
RADIOLA
05, 45
40
SCHNEIDER
05
12
MATSUSHITA
09, 26
41
NEWSAN
58
13
TELEFUNKEN
41, 49, 51, 57
42
CONTINENTAL EDISON
49
14
RCA
29, 61
43
SALORA
48
15
PANASONIC
07, 09, 26, 48, 49, 50
44
SELECO
48
SABA
40, 41, 47, 48, 49
45
NOKIA
48
17
PHILIPS
05, 45, 47, 64, 65, 66, 67, 68, 69
46
REX
48
18
GRUNDIG
39, 42, 46, 70, 71, 72
47
MIVAR
46
19
ZENITH
38
48
IMPERIAL
46
20
MIVAL
52
49
CGE
46
21
NOBLEX
56
50
BANG & OLUFSEN
47
22
EMERSON
19
51
BRIONVEGA
47
23
MAGNAVOX
25
52
FORMENTI
47
24
LOEWE
05, 60
53
METZ
47
25
THOMSON
40, 41, 49, 62, 63
54
WEGA
47
26
NORDMENDE
40, 41, 49
55
RADIOMARELLI
47
27
LOEWE OPTA
36, 47, 05
56
SINGER
47
28
BLAUPUNKT
39
57
SINUDYNE
47
29
SIEMENS
39
MISCELLANEOUS
16
78
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 80
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
Disc tray does not open.
Playback does not start.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Check the region number of the DVD.
DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this DVD
•
player.
Make sure that the rating level is correct.
Playback does not start
• Are you using a deformed disc or a disc with scratches on
the surface?
immediately when the
•
Play/Pause button is pressed. Wipe the disc clean.
Sound is not produced.
• No sound is heard during fast playback, slow playback, and step
motion playback.
• Are the speakers connected properly? Is the speaker setup
correctly customized?
• Is the disc severely damaged?
Sound can be heard only
from a few speakers and
not all six.
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
Dolby Digital 5.1 CH
Surround Sound is not
produced.
79
• When listening to a CD or radio, sound is output to the front
•
•
speakers (L/R) only. Select "PRO LOGIC II" by pressing
(Dolby Pro Logic II) on the remote control to use all six speakers.
Make sure that the DVD disc is 5.1-CH compatible.
If you set C, SL, and SR to NONE in the speaker mode in the
audio setup of the setup screen, no sound is heard from the
center speaker and the front left and right speakers. Set C, SL,
and SR to SMALL.
• Was the DVD player suddenly moved from a cold place to a warm
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
• Is there a "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital
•
5.1 CH Surround Sound is produced only if the disc is recorded
with 5.1 channel sound.
Is the audio language correctly set to DOLBY DIGITAL 5.1-CH in
the information display?
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Symptom
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
picture is shaking.
Page 81
Check/Remedy
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
• Is the remote control being operated within its operation range of
The remote control does not angle and distance?
• Are the batteries exhausted?
work.
Have you selected the mode(TV/DVD) functions of the remote
•
control (TV or DVD) correctly?
Audio language and
subtitles do not work.
Menu screen does not appear even
when the menu function is selected.
• Audio language and subtitles will not work for DVDs not containing
Aspect ratio cannot be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Can't receive radio
broadcast.
• The main unit is not working.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
(Example: The power goes out or
strange noise is heard.)
• Are you using a disc that does not contain menus?
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
antenna in an area with good reception.
• Turn off the power and hold the
button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of main unit, hold
The password for rating
level has been forgotten.
the main unit's
button for longer than 5 seconds. “INITIALIZE”
appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
80
MISCELLANEOUS
• The DVD player is not
working normally.
them. And depending on the disc, they may work differently.
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 82
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Keep in a cool
ventilated area
Do not keep in
direct sunlight
Caution
Keep in a clean
Protection jacket.
Store vertically.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
Note
• Condensation may form if warm air comes into contact with cold parts
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
81
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 83
Specifications
Power Consumption
G
E
N
E
R
A
L
Weight
T
F U
N
M E
R
V
I
D
E
O
O
U
T
P
U
T
A
M
P
L
I
F
I
E
R
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Distortion
Composite Video
Component Video
HDMI
Front speaker output
Center speaker output
Rear speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
Speaker system (PSDS 1000E)
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
S
P
E
A
K
E
R
S
Dimensions (W x H x D)
Weight
Speaker system (PSDS 1100E)
Impedance
Dimensions (W x H x D)
Weight
MISCELLANEOUS
Frequency range
Output sound pressure level
Rated input
Maximum input
HT-DS1000/1100 : 30W
PSWS1000E/1100E : 150W
MAIN UNIT
: 2.25kg
VERTICAL STAND
: 6.35kg
HORIZONTAL STAND : 1.5kg
180 x 500 x 68 mm
5°C ~ 35°C
10% ~ 75%
10dB
60dB
0.5%
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
Impedance: 85~115Ω
100W x 2(4Ω)
100W(4Ω)
100W x 2(4Ω)
150W(3Ω)
20Hz~20kHz
70dB
60dB
(AUX)500mV
5.1ch speaker system
Front/Center/Rear speaker
Subwoofer speaker
4Ω x 5
3Ω
150Hz~20kHz
30Hz~200Hz
82dB/W/M
85dB/W/M
100W
150W
200W
300W
Front/Rear 70 x 1388 x 145 mm
250 x 460 x 505 mm
Center 414 x 82 x 155 mm
Front/Rear 6.0 kg
11.5 kg
Center 1.5 kg
5.1ch speaker system
Front/Center/Rear speaker
Subwoofer speaker
Front/Rear 4Ω x 4
3Ω
Center 4Ω
30Hz~200Hz
100Hz~20kHz
86dB/W/M
86dB/W/M
150W
100W
300W
200W
Front/Rear 380 x 1388 x 245 mm
280 x 470 x 435 mm
Center 418 x 140 x 150 mm
Front/Rear 7.5 kg
12.6 kg
Center 2.8 kg
82
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 84
Notes on Terminology
ANGLE
CHAPTER
NUMBER
Recorded onto some DVD discs are scenes which have been simultaneously shot from a number
of different angles (the same scene is shot from the front, from the left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for specific scenes.
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
DVD
A high-density optical disc on which high-quality pictures and sound have been recorded by
means of digital signals. Incorporating a new video compression technology (MPEG-2) and highdensity recording technology, a DVD disc comprises two 0.6 mm thick discs bonded together.
PCM
An acronym for Pulse Code Modulation - another name for digital audio.
PBC
(PLAYBACK
CONTROL)
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
REGION NUMBER
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
SUBTITLES
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
TITLE NUMBER
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
TRACK NUMBER
VIDEO CD
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
Contains recordings of pictures and sound whose quality is roughly comparable
to that of video tape.
This player also supports video CDs with playback control (version 2.0).
You can enjoy 5.1 (or 6) channels of high fidelity digital sound from various
digital input sources such as DVD, CD etc.
DTS provides a realistic, clear surround sound that has not previously been
available from conventional surround sound.
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with
disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
A 4 channel analog sound reproduced from a program source such as a
videotape or LD with the
mark. You can enjoy a more realistic, robust
sound unavailable from regular stereo sources.
83
45P~84P(DS1000)-GB
9/16/04 9:16 AM
Page 85
Memo
MISCELLANEOUS
84
1p~44p(DS1000)-GB
9/16/04 9:14 AM
Page 2
THIS APPLIANCE IS MANUFACTURED BY:
NA
AH68-01544B
Download PDF

advertising