Samsung | C27H580FDU | Samsung Curved Monitor C27H580F LED Benutzerhandbuch

User Manual
C27F581FD* C27H580FD*
The color and the appearance may differ depending on the product, and the specifications are subject to change without
prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.
••
An administration fee may be charged if either
‒‒ (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
‒‒ (b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
••
The amount of such administration charge will be advised to you before any work or home visit is carried out.
Table of contents
Before Using the Product
Securing the Installation Space
Precautions for storage
4
4
Safety Precautions
4
Symbols4
Cleaning5
Electricity and Safety
5
Installation6
Operation7
Preparations
Parts9
Control Panel
9
Direct Key guide
10
Function Key Guide
11
Changing Brightness, Contrast and Sharpness
settings13
Changing the Volume setting
13
Reverse Side
14
Adjusting the Product Tilt
14
Anti-theft Lock
15
Precautions for moving the monitor
15
Installation16
Attaching the Stand
16
Removing the Stand
17
Connecting and Using a Source Device
Screen Setup
Read below before installing the monitor.
SAMSUNG MAGIC Bright
18
22
Connecting and Using a PC
18
Connection Using the D-SUB Cable (Analog Type)18
Connection Using the HDMI Cable
19
Connection Using an HDMI-DVI Cable
19
Connection Using an DP Cable
19
Connecting to Headphones
19
Connecting the Power
20
Brightness23
Correct posture to use the product
20
HDMI Black Level24
Driver Installation
21
Eye Saver Mode24
Setting Optimum Resolution
21
Game Mode24
Contrast23
Sharpness23
Color23
SAMSUNG MAGIC Upscale
24
Response Time24
Picture Size25
Screen Adjustment25
Adjusting OSD (On Screen
Display) settings
Transparency26
Position26
Language26
Display Time26
2
Table of contents
Setup and Reset
Troubleshooting Guide
FreeSync27
Requirements Before Contacting Samsung
Customer Service Center
Testing the Product
Checking the Resolution and Frequency
Check the following.
32
32
32
32
Q & A
34
Eco Saving Plus29
Off Timer29
PC/AV Mode29
Source Detection29
Key Repeat Time29
Power LED On30
Specifications
Reset All30
General35
Information30
Standard Signal Mode Table
Installing the Software
Appendix
Easy Setting Box
31
36
Responsibility for the Pay Service (Cost to
Customers)38
Not a product defect
38
A Product damage caused by customer's fault 38
Others38
3
Chapter 01
Before Using the Product
Securing the Installation Space
Safety Precautions
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and
damage the product. Be sure to allow the amount of space as shown below or greater when installing
the product.
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER. (OR BACK)
――The exterior may differ depending on the product.
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside.
10 cm (3.93 Inches)
It is dangerous to make any kind of contact with any internal part of
this product.
10 cm (3.93 Inches)
10 cm
(3.93 Inches)
10 cm
(3.93 Inches)
This symbol alerts you that important literature concerning operation
and maintenance has been included with this product.
10 cm
(3.93 Inches)
Precautions for storage
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are
not followed.
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
――Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product
(Service fee will be charged.)
Do not press the monitor screen with hands or other objects. There is a risk of damaging the screen.
4
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
――Take the following steps when cleaning.
Electricity and Safety
Warning
1 Power off the product and computer.
•• Do not use a damaged power cord or plug, or a loose power socket.
2 Disconnect the power cord from the product.
•• Do not use multiple products with a single power socket.
――Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric
shock may result.
3 Wipe the monitor with a clean, soft and dry cloth.
‒‒ Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
‒‒ Do not spray water or detergent directly on the product.
•• Do not touch the power plug with wet hands.
•• Insert the power plug all the way in so it is not loose.
•• Connect the power plug to a grounded power socket (type 1 insulated devices only).
•• Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy
object.
4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
•• Do not place the power cord or product near heat sources.
5 Connect the power cord to the product when cleaning is finished.
•• Clean any dust around the pins of the power plug or the power socket with a dry cloth.
6 Power on the product and computer.
Caution
•• Do not disconnect the power cord while the product is being used.
•• Only use the power cord provided with your product by Samsung. Do not use the power cord with
other products.
•• Keep the power socket where the power cord is connected unobstructed.
‒‒ The power cord must be disconnected to cut off power to the product when an issue occurs.
•• Hold the plug when disconnecting the power cord from the power socket.
5
Installation
Warning
Caution
•• DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT
INSTALL THE PRODUCT NEAR HEAT SOURCES.
•• Do not drop the product while moving.
•• Do not install the product in poorly ventilated spaces such as a bookcase or closet.
•• Install the product at least 10cm away from the wall to allow ventilation.
•• Keep the plastic packaging out of the reach of children.
‒‒ Children may suffocate.
•• Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.)
‒‒ The product may fall and become damaged and/or cause an injury.
‒‒ Using the product in an area with excess vibration may damage the product or cause a fire.
•• Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or
smoke.
•• Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
‒‒ The product lifespan may be reduced or a fire may result.
•• Do not set down the product on its front.
•• When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of
the product is not protruding.
‒‒ The product may fall and become damaged and/or cause an injury.
‒‒ Install the product only on cabinets or shelves of the right size.
•• Set down the product gently.
‒‒ Product failure or personal injury may result.
•• Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical
substances, extreme temperatures or a significant presence of moisture, or a place where
the product will operate continuously for an extended period of time) may seriously affect its
performance.
‒‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a
place.
•• Do not install the product within the reach of young children.
‒‒ The product may fall and injure children.
•• Edible oil (such as soybean oil) may damage or distort the product. Keep the product away from oil
pollution. And do not install or use the product in the kitchen or near the kitchen stove.
6
Operation
Warning
•• There is a high voltage inside the product. Never disassemble, repair or modify the product
yourself.
‒‒ Contact Samsung Customer Service Center for repairs.
•• To move the product, first disconnect all the cables from it, including the power cable.
•• If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord
immediately and contact Samsung Customer Service Center.
•• Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper,
matches, etc) into the product (via the vent or input/output ports, etc).
‒‒ Be sure to power off the product and disconnect the power cord when water or other foreign
substances have entered the product. Then contact Samsung Customer Service Center.
•• Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the
product.
‒‒ Be sure to power off the product and disconnect the power cord when water or other foreign
substances have entered the product. Then contact Samsung Customer Service Center.
•• Do not let children hang from the product or climb on top of it.
‒‒ Children may become injured or seriously harmed.
•• If the product is dropped or the outer case is damaged, turn off the power and disconnect the
power cord. Then contact Samsung Customer Service Center.
‒‒ Continued use can result in a fire or electric shock.
•• Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.
‒‒ The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a
serious injury.
•• During a lightning or thunderstorm, power off the product and remove the power cable.
•• Do not drop objects on the product or apply impact.
•• Do not move the product by pulling the power cord or any cable.
•• If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area
immediately.
•• Do not lift or move the product by pulling the power cord or any cable.
•• Do not use or keep combustible spray or an inflammable substance near the product.
•• Ensure the vents are not blocked by tablecloths or curtains.
‒‒ An increased internal temperature may cause a fire.
7
Caution
•• Leaving the screen fixed on a stationary image for an extended period of time may cause
afterimage burn-in or defective pixels.
‒‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the
product for an extended period of time.
•• Disconnect the power cord from the power socket if you do not plan on using the product for an
extended period of time (vacation, etc).
‒‒ Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
•• Use the product at the recommended resolution and frequency.
‒‒ Your eyesight may deteriorate.
•• Do not put AC/DC adapters together.
•• Remove the plastic bag from the AC/DC adapter before you use it.
•• Do not touch the screen when the product has been turned on for an extended period of time as it
will become hot.
•• Store small accessories out of the reach of children.
•• Exercise caution when adjusting the product angle or stand height.
‒‒ Your hand or finger may get stuck and injured.
‒‒ Tilting the product at an excessive angle may cause the product to fall and an injury may result.
•• Do not place heavy objects on the product.
‒‒ Product failure or personal injury may result.
•• When using headphones or earphones, do not turn the volume too high.
‒‒ Having the sound too loud may damage your hearing.
•• Do not let water enter the AC/DC adapter device or get the device wet.
‒‒ An electric shock or fire may result.
‒‒ Avoid using the product outdoors where it can be exposed to rain or snow.
‒‒ Be careful not to get the AC/DC adapter wet when you wash the floor.
•• Do not put the AC/DC adapter near to any heating apparatus.
‒‒ Otherwise, a fire may result.
•• Keep the AC/DC adapter in a well-ventilated area.
•• If you place the AC/DC power adapter so that it is hanging with the cord input facing upwards,
water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.
Make sure to rest the AC/DC power adapter flat on a table or the floor.
•• Do not hold the product upside-down or move it by holding the stand.
‒‒ The product may fall and become damaged or cause an injury.
•• Looking at the screen too close for an extended period of time can deteriorate your eyesight.
•• Do not use humidifiers or stoves around the product.
•• Rest your eyes for more than 5 minutes or look at distance objects for every 1 hour of product use.
8
Chapter 02
Preparations
Parts
Icons
Description
Multi directional button that helps navigate.
JOG Button
――The JOG button is located on the rear left side of the product. The
button can be used to move up, down, left or right, or as Enter.
Control Panel
This LED is power status indicator and works as
――The color and shape of parts may differ from what is shown. Specifications are subject to change without
•• Power On (Power button): Off
notice to improve quality.
•• Power saving mode: Blinking
Power LED
•• Power Off (Power button): On
――The power Indicator operation can be swapped by changing in the
menu. (System
Power LED On) Actual models because of functional
variation maybe haven’t this function.
Function Key Guide
Press the JOG button when the screen is turned on. The Function Key
Guide will appear. To access the onscreen menu when the guide is
displayed, press the corresponding direction button again.
――Function Key Guide may vary depending on the function or product
model. Please refer to the actual product.
Power LED
JOG Button
Function Key Guide
UP
LEFT
PRESS(ENTER)
RIGHT
DOWN
Return
9
Direct Key guide
――The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes.
――The function buttons page shows if Eye Saver Mode is enabled.
: On
: Off
Analog mode
HDMI, DisplayPort mode
Brightness
Brightness
Auto Adjustment
Volume
Volume
Features
Features
Eye Saver Mode Off
――Analog mode option
••
: Adjust Brightness, Contrast, Sharpness.
••
: Auto Adjustment
Eye Saver Mode Off
――HDMI, DisplayPort mode option
••
/
: Adjust Brightness, Contrast, Sharpness.
••
: Adjust Volume, Mute.
••
: Display Function Key Guide.
――Changing the resolution in Display Properties will activate the Auto Adjustment function.
――This function is only available in Analog mode.
••
: Adjust Volume, Mute.
••
: Display Function Key Guide.
10
Function Key Guide
――To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again.
UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.
PRESS(ENTER): The selected item will be applied.
Return
Icons
Description
Selects
to change the input signal by moving the JOG button in the Function Key Guide screen. A message will appear on the top left corner of the screen if the input signal has
been changed.
Selects
by moving the JOG button in the function key guide screen.
The OSD (On Screen Display) of your Monitor’s feature appears.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
Enable/Disable: To lock/unlock the OSD control, press the LEFT button for 10 seconds when the main menu displayed.
――If the OSD control is locked, Brightness and Contrast can be adjusted. Eye Saver Mode is available.
Information can be viewed.
Selects
by moving the JOG button in the function key guide screen.
Press to enable or disable Eye Saver Mode.
The items below are not available if the Eye Saver Mode function is enable.
•• Picture
SAMSUNG
Game Mode, MAGIC
Bright, Brightness, Color
•• System
Eco Saving Plus
Selects
to turn the Monitor off by moving the JOG button in the function key guide screen.
――Actual models because of functional variation, Function key guide options will be different.
11
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for
control source and power could be used as below.
JOG Button
Power saving/Non-signal mode
UP
Source Change
Down
PRESS(ENTER) for 2 seconds
Power Off
When the monitor displays the Main menu the JOG Button could be used as below.
JOG Button
Action
UP/DOWN
Move the option
Exit the Main menu.
LEFT
Close Sublist without saving value.
Value decreases in the slider.
RIGHT
PRESS(ENTER)
Move to next depth.
Value increases in the slider.
Move to next depth.
Save the value and close Sublist.
12
Changing Brightness, Contrast and Sharpness settings
Changing the Volume setting
You can adjust Brightness, Contrast or Sharpness by moving the JOG button up or down, if no OSD
menu is displayed.
You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed.
50
Volume
Sharpness
100
Brightness
Contrast
Mute
――The displayed image may differ depending on the model.
――The displayed image may differ depending on the model.
Brightness
――This menu is not available when SAMSUNGBright is set to Dynamic Contrast mode.
MAGIC
――This menu is not available when Eco Saving Plus is enabled.
――This menu is not available when Eye Saver Mode is enabled.
Contrast
――This menu is not available when SAMSUNGBright is in Cinema or Dynamic Contrast mode.
MAGIC
――This menu is not available when Game Mode is enabled.
――If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute
the sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the
input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on
the product.
――What is Auto Mute?
The function mutes the audio to improve sound effect when there is sound noise or when the input
signal is weak, usually due to a problem with the volume of an input device.
――To activate the Mute function, access the Volume control screen, then use the JOG button to move the
focus down.
To deactivate the Mute function, access the Volume control screen, then increase or decrease the Volume.
Sharpness
――This menu is not available when SAMSUNGBright is in Cinema or Dynamic Contrast mode.
MAGIC
――This menu is not available when SAMSUNGUpscale is in Mode1 or Mode2 mode.
MAGIC
――This menu is not available when Game Mode is enabled.
13
Reverse Side
Adjusting the Product Tilt
――The color and shape of parts may differ from what is shown. Specifications are subject to change without
――The color and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.
notice to improve quality.
-2.0° (±2.0°) ~20.0° (±2.0°)
Port
Description
Connects to a PC using a DP cable.
Connects to a source device using an HDMI cable or HDMI-DVI cable.
•• You can adjust the product tilt.
•• Hold the lower part of the product and adjust the tilt carefully.
Connect to a PC using the D-SUB cable.
Receives sound from a PC via an audio cable.
Connect to an audio output device such as headphones.
Connects to the AC/DC adapter.
14
Anti-theft Lock
Precautions for moving the monitor
――An anti-theft lock allows you to use the product securely even in public places.
――The locking device shape and locking method depend on the manufacturer. Refer to the user guide
provided with your anti-theft locking device for details.
To lock an anti-theft locking device:
•• Do not directly apply pressure on the screen.
•• Do not hold the screen when moving the monitor.
1 Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2 Put one end of the cable through the loop on the other end.
3 Insert the locking device into the anti-theft lock slot at the back of the product.
4 Lock the locking device.
‒‒ An anti-theft locking device can be purchased separately.
‒‒ Refer to the user guide provided with your anti-theft locking device for details.
‒‒ Anti-theft locking devices can be purchased at electronics retailers or online.
•• Hold the lower part of the monitor when moving it.
15
Installation
Attaching the Stand
――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
Place the protective Styrofoam (cushion) included in
the package on the floor and place the product facing
down on the Styrofoam, as shown in the image.
4
Attach the stand base to the stand neck, and then
fasten the two screws on the base to tightly fix it.
――Make sure to use the styrofoam (cushion) that came
with the monitor.
2
While holding the monitor, push in the stand neck in
the direction of the arrow, as shown in the image.
- Caution
3
While holding the monitor, lift the stand neck in the
direction of the arrow and adjust it, as shown in the
image.
- Caution
Do not hold the product upside down only by the stand.
Do not press down on the monitor. There is a risk of
damaging the monitor.
16
Removing the Stand
――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
Place the protective Styrofoam (cushion) included in
the package on the floor and place the product facing
down on the Styrofoam, as shown in the image.
4
While holding the monitor, pull and remove the stand
neck in the direction of the arrow, as shown in the
image.
――Make sure to use the styrofoam (cushion) that came
with the monitor.
2
Unfasten the two screws on the stand base to remove
it.
3
While holding the monitor, lift the stand neck in the
direction of the arrow and adjust it, as shown in the
image.
- Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
17
Chapter 03
Connecting and Using a Source Device
Read below before installing the monitor.
Connecting and Using a PC
1 Check the shapes of both ends of the cables that came with the monitor, and check the shapes and
Select a connection method suitable for your PC.
2 Before connecting signal cables, disconnect the power cables for the monitor and external devices
――Provided ports may vary depending on the product.
3 After connecting all signal cables, connect the power cables for the monitor and external devices
Connection Using the D-SUB Cable (Analog Type)
positions of the matching ports on the monitor and external devices.
――Connecting parts may differ in different products.
from the power outlet to prevent device damage from a short circuit or overcurrent.
to the power outlet.
4 Read the user manual to familiarize yourself with the monitor functions, precautions, and proper
use, before using the installed monitor.
Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.
D-SUB IN
AUDIO IN
18
Connection Using the HDMI Cable
Connection Using an DP Cable
Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.
Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.
DP IN
HDMI IN
――A DP cable shorter under 1.5 m in length is recommended. Using a cable longer than 1.5 m can affect the
Connection Using an HDMI-DVI Cable
Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.
picture quality.
Connecting to Headphones
HDMI IN
AUDIO IN
――Use headphones when activating sound with a D-SUB + AUDIO, HDMI-DVI + AUDIO, HDMI-HDMI or DP
cable.
――The audio function is not supported if the source device is connected using the HDMI-DVI cable.
19
Correct posture to use the product
Connecting the Power
1
2
3
Use the product in the correct posture as follows:
•• Straighten your back.
1 Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 14V
port on the back of the product.
2 Next, connect the power cable to the power outlet.
3 Press the JOG button on the back of the monitor to turn it on.
――The input voltage is switched automatically.
•• Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at
the screen.
•• Keep your eyes directly in front of the screen.
•• Adjust the angle so light does not reflect on the screen.
•• Keep your forearms perpendicular to your upper arms and level with the back of your hands.
•• Keep your elbows at about a right angle.
•• Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your heels
attached to the floor, and your arms lower than your heart.
•• Do the Eye excercises or blink frequently,then eye fatigue will be relieved.
20
Driver Installation
――You can set the optimum resolution and frequency for this product by installing the corresponding drivers.
――To install the latest version of the product driver, download it from the Samsung Electronics website at
http://www.samsung.com.
Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for
the first time after purchase.
Select a language on the product and change the resolution on your PC to the optimum setting.
――If the optimum resolution is not selected, the message will appear up to three times for a specified time
even when the product is turned off and on again.
――The optimum resolution can also be selected in Control Panel on your PC.
21
Chapter 04
Screen Setup
Configure the screen settings such as brightness.
A detailed description of each function is provided. Refer to your product for details.
SAMSUNG MAGIC Bright
In PC mode
This menu provides an optimum picture quality suitable for the environment where the product will be
used.
•• Standard: Obtain a picture quality suitable for editing documents or using Internet.
•• Custom: Customize the contrast and brightness as required.
――This menu is not available when Eco Saving Plus is enabled.
•• Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
――This menu is not available when Game Mode is enabled.
•• Basic Color: This model supports a photochromic station. When switching to this mode, the color
area is adjusted to be similar to the standard color gamut of sRGB.
――This menu is not available when Eye Saver Mode is enabled.
You can customize the brightness to suit your preferences.
In AV mode
Picture
SAMSUNG
MAGIC Bright
•• Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.
Custom
Brightness
100
Contrast
75
Sharpness
60
Set to an
optimum picture
quality suitable
for the working
environment.
•• Dynamic: Select this mode to view a sharper image than in Standard mode.
Color
SAMSUNG
MAGIC Upscale
SAMSUNG
When the external input is connected through HDMI/DP and PC/AV Mode is set to AV, MAGIC
Bright
has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the
factory. You can activate either Dynamic, Standard, Movie or Custom. You can select Custom which
automatically recalls your personalized picture settings.
•• Standard: Select this mode when the surroundings are bright. This also provides a sharp image.
Off
•• Movie: Select this mode when the surroundings are dark. This will save power and reduce eye
fatigue.
HDMI Black Level
Return
•• Custom: Select this mode when you want to adjust the image according to your preferences.
――The displayed image may differ depending on the model.
22
Brightness
Color
You can adjust the general brightness of the picture. (Range: 0~100)
Adjust the tint of the screen.
A higher value will make the picture appear brighter.
――This menu is not available when SAMSUNGBright is set to Cinema, Dynamic Contrast or Basic Color mode.
――This menu is not available when SAMSUNGBright is set to Dynamic Contrast mode.
――This menu is not available when Game Mode is enabled.
――This menu is not available when Eco Saving Plus is enabled.
――This menu is not available when Eye Saver Mode is enabled.
――This menu is not available when Eye Saver Mode is enabled.
•• Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.
MAGIC
MAGIC
•• Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the color.
•• Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.
Contrast
•• Color Tone: Select a color tone that best suits your viewing needs.
‒‒ Cool 2: Set the color temperature to be cooler than Cool 1.
Adjust the contrast between the objects and background. (Range: 0~100)
‒‒ Cool 1: Set the color temperature to be cooler than Normal mode.
A higher value will increase the contrast to make the object appear clearer.
‒‒ Normal: Display the standard color tone.
――This option is not available when SAMSUNGBright is in Cinema, Dynamic Contrast or Basic Color mode.
MAGIC
――This menu is not available when Game Mode is enabled.
‒‒ Warm 1: Set the color temperature to be warmer than Normal mode.
‒‒ Warm 2: Set the color temperature to be warmer than Warm 1.
‒‒ Custom: Customize the color tone.
――When the external input is connected through HDMI/DP and PC/AV Mode is set to AV, Color Tone has
Sharpness
four color temperature settings (Cool, Normal, Warm and Custom).
•• Gamma: Adjust the middle level of luminance.
Make the outline of objects more clear or blurry. (Range: 0~100)
‒‒ Mode1 / Mode2 / Mode3
A higher value will make the outline of objects clearer.
――This option is not available when SAMSUNGBright is in Cinema or Dynamic Contrast mode.
MAGIC
――This menu is not available when SAMSUNGUpscale is in Mode1 or Mode2 mode.
MAGIC
――This menu is not available when Game Mode is enabled.
23
SAMSUNG MAGIC Upscale
Eye Saver Mode
MAGICUpscale
Set to an optimum picture quality suitable for eye relaxation.
SAMSUNG
function can enhance the layers of the picture details and the vividness of the picture.
The function has more obvious effects on low-resolution pictures.
――This menu is not available when SAMSUNGBright is set to Cinema or Dynamic Contrast mode.
MAGIC
――This menu is not available when Game Mode is enabled.
•• Off / Mode1 / Mode2
――Comparing with Mode1, Mode2 has a stronger effect.
HDMI Black Level
TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for
lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm
will decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same
time, the blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and
certified as it met the requirements of TÜV Rheinland “Low Blue Light Content” standards.
Game Mode
Configure the product screen settings for game mode.
If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/
color degradation, black level, etc.) may occur, depending on the connected source device. In such case,
HDMI Black Level can be used to adjust the image quality.
Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™
is connected.
If this is the case, correct the degraded picture quality using HDMI Black Level.
――This menu is not available when Eye Saver Mode is enabled.
――This function is only available in HDMI mode.
•• Normal: Select this mode when there is no contrast ratio degradation.
•• Low: Select this mode to reduce the black level and increase the white level when there is a
contrast ratio degradation.
――HDMI Black Level may not be compatible with some source devices.
――The HDMI Black Level feature is only activated at a certain AV resolution, such as 720P and 1080P.
――This option is not available when SAMSUNGBright is in Basic Color mode.
MAGIC
――When the monitor turns off, enters power-saving mode or changes input sources, Game Mode turns Off
even if it is set to On.
――If you want to keep Game Mode enabled all the time, select Always On.
Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
――It is best to set Response Time to Standard or Faster when you are not viewing a movie.
24
Picture Size
Screen Adjustment
Change the picture size.
This menu is available in Analog mode only.
In PC mode
•• Auto: Display the picture according to the aspect ratio of the input source.
•• Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
In AV mode
•• 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
――This menu is only available when Picture Size is set to Screen Fit in AV Mode.
When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally,
select Screen Fit to adjust horizontal position in 0-6 levels.
Configuring H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
•• 16:9: Display the picture with an aspect ratio of 16:9.
Configuring Coarse
•• Screen Fit: Display the picture with the original aspect ratio without cutting off.
Adjust the screen frequency.
――The function may not be supported depending on the ports provided with the product.
――Changing the screen size is available when the following conditions are satisfied.
――This menu is available in Analog mode only.
――A digital output device is connected using the HDMI/DP cable.
Configuring Fine
――The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
Fine-adjust the screen to obtain a vivid picture.
support all of these signals.).
――This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to
――This menu is available in Analog mode only.
AV.
(DisplayPort/HDMI: This option is available when FreeSync is disabled)
25
Chapter 05
Adjusting OSD (On Screen Display) settings
A detailed description of each function is provided. Refer to your product for details.
Transparency
Position
Set the transparency for the menu windows.
Adjust the menu position.
OnScreen Display
Transparency
한국어
On
Position
Language
Display Time
Configure the
transparency
of the menu
windows.
Language
English
Set the menu language.
20 sec
――A change to the language setting will only be applied to the onscreen menu display.
――It will not be applied to other functions on your PC.
Return
――The displayed image may differ depending on the model.
Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
26
Chapter 06
Setup and Reset
A detailed description of each function is provided. Refer to your product for details.
FreeSync
FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency.
This feature will eliminate screen tearing and lag during game play. Improve your gaming experience.
•• Off: Disable FreeSync.
System
FreeSync
Off
Eco Saving Plus
Off
Off Timer
PC/AV Mode
Source Detection
Auto
Key Repeat Time
Acceleration
Power LED On
Stand-by
FreeSync
technology is
solution that
eliminates screen
tearing without all
the usual lag and
latency. FreeSync
can be operated
when you use
AMD's graphic card
with supporting
Freesync solution.
Return
――The displayed image may differ depending on the model.
•• Standard Engine: Enable the basic FreeSync functions of the AMD graphics card.
•• Ultimate Engine: Enable the FreeSync feature with a higher screen frame rate. Screen tearing
(abnormal sync between the screen and content) is reduced in this mode. Note that screen
flickering may occur during game play.
When select Ultimate Engine mode, please use maximum screen refresh rate for optimal freesync
effect.
The refresh rate setting method please refer to Q & A
How can I change the frequency?
――The FreeSync function is only enabled in HDMI or DisplayPort mode.
Use the HDMI/DisplayPort cable provided by the manufacturer when using FreeSync.
If the FreeSync function is enabled, the following may occur:
•• The screen may flicker when you play games depending on the game option settings. Decreasing
the game setting values might help to remove the flicker. Installing the latest drivers from the
AMD website may also fix this issue.
•• The response rate during the game may fluctuate depending on the resolution. A higher resolution
generally decreases the response rate.
•• The sound quality of the monitor may be degraded.
――If you encounter any issues when using the function, contact the Samsung Service Center.
27
The models in the Graphic Cards list supports FreeSync
FreeSync can only be used with specific AMD graphics card models. Refer to the following list for
supported graphics cards:
Make sure to install the latest official graphics drivers from AMD that support FreeSync.
――For additional AMD graphics card models that support the FreeSync feature, visit the official AMD website.
――Select FreeSync Off if you are using a graphics card from a different manufacturer.
•• AMD Radeon R9 300 Series
•• AMD Radeon R9 290
•• AMD Radeon R9 Fury X
•• AMD Radeon R9 285
•• AMD Radeon R7 360
•• AMD Radeon R7 260X
•• AMD Radeon R9 295X2
•• AMD Radeon R7 260
•• AMD Radeon R9 290X
How do you enable FreeSync?
1 Set FreeSync to Standard Engine or Ultimate Engine in the OSD menu.
2 Enable FreeSync in AMD Radeon Settings:
Right-click the mouse
AMD Radeon Settings
Display
The "AMD FreeSync" feature should be set to "On". Select to "On" if not already enabled.
28
Eco Saving Plus
PC/AV Mode
The Eco Saving Plus function reduces power consumption by controlling the electric current used by
the monitor panel.
Set PC/AV Mode to AV. The picture size will be enlarged.
――This option is not available when SAMSUNGBright is in Dynamic Contrast mode.
MAGIC
――This menu is not available when Game Mode is enabled.
――This menu is not available when Eye Saver Mode is enabled.
•• Off: Deactivate the Eco Saving Plus function.
•• Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
•• Low: The power consumption will be reduced by 25% over the default setting.
•• High: The power consumption will be reduced by 50% over the default setting.
Off Timer
Off Timer: Turn on Off Timer mode.
Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
power off after the specified number of hours.
――This option is only available when Off Timer is set to On.
――For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer
to activate, go to MENU
System and set Off Timer to Off.
This option is useful when you view a movie.
•• Set to PC when connected to a PC.
•• Set to AV when connected to an AV device.
•• If you connect a PC using a HDMI-DVI cable, set to DVI PC.
――This function does not support Analog mode.
――Supplied for the wide models only such as 16:9 or 16:10.
――If the monitor is in HDMI, DisplayPort mode and the screen says Check Signal Cable or power saving mode
activates, press the JOG button to display the function-button screen and then select the
can select PC or AV.
icon. You
Source Detection
Select either Auto or Manual as the method to recognize input signal.
Key Repeat Time
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once
when a button is pressed.
29
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
•• Working: The power LED is on when the product is turned on.
•• Stand-by: The power LED is on when the product is turned off.
Reset All
Return all the settings for the product to the default factory settings.
Information
View the current input source, frequency and resolution.
Picture
OnScreen Display
System
Information
Information
*********
**kHz **Hz NN
****x****
Optimal Mode
****x**** **Hz
Exit
――The displayed image may differ depending on the model.
30
Chapter 07
Installing the Software
Easy Setting Box
System Requirements
OS
Easy Setting Box
Hardware
•• Windows XP 32Bit/64Bit
•• At least 32MB of memory
•• Windows Vista 32Bit/64Bit
•• At least 60MB of free space on the hard disk drive
•• Windows 7 32Bit/64Bit
Easy Setting Box enables users to use the monitor by partitioning multiple sections.
•• Windows 8 32Bit/64Bit
To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at
http://www.samsung.com.
•• Windows 8.1 32Bit/64Bit
――The software may not work properly if you do not restart the computer after the installation.
•• Windows 10 32Bit/64Bit
――The Easy Setting Box icon may not appear depending on the computer system and the product
specifications.
――If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation
The Easy Setting Box installation may be affected by the Graphics Card, Motherboard and the
Networking Environment.
31
Chapter 08
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Center
――Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center.
Check the following.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connectors are locked.
Testing the Product
Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected
to the product and PC.
Check if your product is operating normally by using the product test function.
The blank spaces found on the screen have nothing to do with the product.
If the screen is turned off and the power indicator blinks even though the product is properly connected
to a PC, perform a self-diagnosis test.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the
screen size in the HDMI or DVI settings for the graphics card.
1 Power off both the PC and product.
2
Disconnect the cables from the product.
3 Power on the product.
4 If the message Check Signal Cable appears, the product is working normally.
――If the screen remains blank, check the PC system, video controller and cable.
Checking the Resolution and Frequency
If the graphics card settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust
the screen settings.)
Screen issue
The power LED is off. The screen will not switch on.
For a mode that exceeds the supported resolution(refer to Standard Signal Mode Table), the message
Not Optimum Mode will appear for a short time.
Check that the power cable is connected properly.
――The displayed resolution may vary, depending on the computer system settings and cables.
Check that the cable is properly connected to the product.
The message Check Signal Cable appears.
Check that the device connected to the product is powered on.
32
Not Optimum Mode is displayed.
Video playback is choppy.
This message appears when the signal from the graphics card exceeds the maximum resolution or
frequency for the product.
Playback of high-definition large video files can be choppy. This may be because the video player is
not optimized for the computer resource.
Change the maximum resolution and frequency to suit the product performance, referring to
Standard Signal Mode Table (P.36).
Try playing the file on another video player.
The images on the screen look distorted.
Check the cable connection to the product.
The screen is not clear. The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc.) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky. There are shadows or ghost images left on the screen.
Check that the resolution and frequency for the PC are within the range of resolution and frequency
compatible with the product. Next, if required, change the settings, referring to Standard Signal
Mode Table (P.36) in this manual and the Information menu on the product.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
Sound issue
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software Program.
Video is available but there is no sound.
Sound cannot be heard if a HDMI-DVI cable is used to connect the input device.
Connect the device using an HDMI cable or a DP cable.
Change the Color settings.
The colors on the screen have a shadow and are distorted.
Change the Color settings.
White does not really look white.
Change the Color settings.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
There is no image on the screen and the power LED blinks every 0.5 to 1 second.
The product is operating in power-saving mode.
Press any key on the keyboard or move the mouse to return to normal operating mode.
Text is blurry.
If using a Windows OS (e.g. Windows 7, Windows 8, Windows 8.1 or Windows 10): Go to Control Panel
Fonts
Adjust ClearType text and change Turn on ClearType.
33
Q&A
――Refer to the user manual for your PC or graphics card for further instructions on adjustment.
How can I change the frequency?
Set the frequency on your graphics card.
•• Windows XP: Go to Control Panel
Appearance and Themes
•• Windows ME/2000: Go to Control Panel
•• Windows Vista: Go to Control Panel
•• Windows 7: Go to Control Panel
Settings
Appearance and Personalization
System
Control Panel
Display
Settings
Advanced
Appearance and Personalization
•• Windows 8(Windows 8.1): Go to Settings
settings.
•• Windows 10: Go to Settings
Display
Display
Advanced
Monitor, and adjust Refresh rate under Monitor settings.
Monitor, and adjust Refresh rate under Monitor settings.
Personalization
Display
Display Settings
Screen Resolution
Appearance and Personalization
Advanced display settings
Advanced Settings
Advanced settings
Display
Monitor, and adjust Refresh rate under Monitor settings.
Screen Resolution
Display adapter properties
Monitor, and adjust Refresh rate under Monitor settings.
Advanced settings
Monitor, and adjust Refresh rate under Monitor
Monitor, and adjust Screen refresh rate under Monitor settings.
How can I change the resolution?
•• Windows XP: Go to Control Panel
Appearance and Themes
•• Windows ME/2000: Go to Control Panel
•• Windows Vista: Go to Control Panel
•• Windows 7: Go to Control Panel
Appearance and Personalization
System
Settings, and adjust the resolution.
Settings, and adjust the resolution.
Appearance and Personalization
•• Windows 8(Windows 8.1): Go to Settings
•• Windows 10: Go to Settings
Display
Display
Control Panel
Display
Personalize
Display
Display Settings, and adjust the resolution.
Adjust Resolution, and adjust the resolution.
Appearance and Personalization
Display
Adjust Resolution, and adjust the resolution.
Advanced display settings, and adjust the resolution.
How do I set power-saving mode?
•• Windows XP: Set power-saving mode in Control Panel
Appearance and Themes
•• Windows ME/2000: Set power-saving mode in Control Panel
•• Windows Vista: Set power-saving mode in Control Panel
•• Windows 7: Set power-saving mode in Control Panel
Appearance and Personalization
Control Panel
Personalization
Screen Saver Settings
Screen Saver Settings
Appearance and Personalization
•• Windows 8(Windows 8.1): Set power-saving mode in Settings
•• Windows 10: Set power-saving mode in Settings
Display
Display
Power options or BIOS SETUP on the PC.
Personalize
Personalize
Screen Saver Settings
Screen Saver Settings
Appearance and Personalization
Lock screen
Power options or BIOS SETUP on the PC.
Screen timeout settings
Personalize
Power options or BIOS SETUP on the PC.
Power options or BIOS SETUP on the PC.
Screen Saver Settings
Power options or BIOS SETUP on the PC.
Power & sleep or BIOS SETUP on the PC.
34
Chapter 09
Specifications
General
――Plug-and-Play
Model Name
C27F581FD* / C27H580FD*
Size
27 Class (27.0 Inches / 68.6 cm)
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data
exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes
Display area
597.89 mm (H) x 336.31 mm (V)
place automatically. However, you can customize the installation settings if desired.
23.539 Inches (H) x 13.24 Inches (V)
Pixel Pitch
0.3114 mm (H) x 0.3114 mm (V)
0.01226 Inches (H) x 0.01226 Inches (V)
Maximum Pixel Clock
148.5 MHz
Power Supply
AC 100 - 240 V - (+/- 10 %), 50/60 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage
can vary in different countries.
Signal connectors
D-SUB, HDMI, DisplayPort
Environmental conditions
Operating
Temperature: 50 F – 104 F (10 C – 40 C)
Humidity: 10 % – 80 %, non-condensing
――Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be
brighter or darker on the LCD panel. This does not affect product performance.
――The above specifications are subject to change without notice to improve quality.
――This device is a Class B digital apparatus.
――For detailed device specifications, visit the Samsung Electronics website.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
Storage
Temperature: -4 F – 113 F (-20 C – 45 C)
Humidity: 5 % – 95 %, non-condensing
35
Standard Signal Mode Table
Synchronization
Resolution
Horizontal Frequency
30 – 81 kHz
Vertical Frequency
56 – 72 Hz
Optimum resolution
1920 x 1080 @ 60 Hz
Maximum resolution
1920 x 1080 @ 60 Hz
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual.
Resolution
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 x 900 RB
60.000
60.000
108.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
36
Resolution
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
――Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in
kHz.
――Vertical Frequency
Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality.
To avoid this, it is recommended that you select the optimum resolution specified for your product.
37
Chapter 10
Appendix
Responsibility for the Pay Service (Cost to
Customers)
A Product damage caused by customer's fault
――When the service is requested, in spite of in warranty, we may charge you for a visit from a service
•• External impact or drop.
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•• If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•• Use of supplies or separatly sold product unspecified by Samsung.
•• Repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
•• Remodeling or repairing the product by customer.
•• Using it with incorrect voltage or non-authorised electrical connections.
•• Not following the "cautions" in User Manual.
•• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.)
•• If a product is reinstalled or devices are connected additionally after installing the purchased
product for the first time.
•• If a product is reinstalled to move to a different spot or to move to a different house.
•• If customer requests instructions on how to use because of another company's product.
•• If customer requests instructions on how to use the network or another company's Program.
•• If customer requests software installation and setup for the product.
Others
•• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator,
Lamp, Filter, Ribbon, etc.)
――If customer requests a service in case the product has no defect, service fee may be charged. So please
read User Manual first.
•• If a service technician removes/cleans dusts or foreign materials inside of the product.
•• If customer requests an installation additionally after purchasing a product through homeshopping or online.
38
Download PDF

advertising