Samsung | S27H850QFU | Samsung Business Monitor S27H850 LED Benutzerhandbuch

User Manual
S*H85*
The color and the appearance may differ depending on the product, and the specifications are subject to change without
prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.
••
An administration fee may be charged if either
‒‒ (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
‒‒ (b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
••
The amount of such administration charge will be advised to you before any work or home visit is carried out.
Table of contents
Before Using the Product
Securing the Installation Space
Precautions for storage
Removing the Stand (S24H850QF*)
Removing the Stand (S27H850QF*)
21
22
4
4
Safety Precautions
4
Symbols4
Cleaning5
Electricity and Safety
5
Installation6
Operation7
Preparations
Parts9
Control Panel
9
Direct Key guide
10
Function Key Guide
11
Changing Brightness, Contrast and
13
Eye Saver Mode settings
Changing the Volume setting
13
Reverse Side
14
Adjusting the Product Tilt and Height
15
Rotating the Monitor Screen
15
Anti-theft Lock
16
Precautions for moving the monitor
16
Installing a Wall-mount Kit or Desktop Stand
(S24H850QF*)17
Installing a Wall-mount Kit or Desktop Stand
(S27H850QF*)18
Installation19
Attaching the Stand (S24H850QF*)
19
Attaching the Stand (S27H850QF*)
20
Screen Setup
SAMSUNG MAGIC Bright
32
Brightness33
Connecting and Using a Source Device
Contrast33
Read below before installing the monitor.
23
Sharpness33
Connecting and Using a PC
Connection Using the HDMI Cable
Connection Using the HDMI-DVI Cable
Connection Using the USB Type-C Cable
Connection Using the DP Cable
Connecting to Headphones
23
23
24
24
25
25
Color33
Connecting an External Monitor
Connection Using an DP Cable
25
25
Game Mode34
Connecting the Product to a PC as a USB HUB 26
Connecting a PC to the Product
26
Utilizing the Product as a USB HUB
26
Tidying Up the Connected Cables (S24H850QF*) 28
Tidying Up the Connected Cables (S27H850QF*)29
Picture Size35
Connecting the Power
30
Configuring the PIP/PBP Settings
Correct posture to use the product
31
Driver Installation
31
Setting Optimum Resolution
31
SAMSUNG MAGIC Upscale
34
HDMI Black Level34
Eye Saver Mode34
Response Time34
Screen Adjustment35
PIP/PBP Mode36
Size37
Position37
Sound Source37
Source38
Picture Size38
2
Table of contents
Contrast39
Adjusting OSD (On Screen
Display) settings
Transparency40
Language40
Display Time40
Setup and Reset
DisplayPort Ver.41
DP OUT42
DP OUT (MST/SST) Function Implementation
42
FreeSync45
Smart ECO Saving47
Off Timer Plus47
Installing the Software
Appendix
Easy Setting Box
49
Restrictions and Problems with the Installation 49
System Requirements
49
Responsibility for the Pay Service (Cost to
Customers)56
Not a product defect
56
A Product damage caused by customer's fault 56
Others56
Troubleshooting Guide
Extended warranty
57
Requirements Before Contacting Samsung Customer
Service Center
50
Testing the Product
50
Checking the Resolution and Frequency
50
Check the following.
50
Q & A
52
Specifications
General53
Standard Signal Mode Table
54
PC/AV Mode47
Source Detection48
Key Repeat Time48
Power LED On48
Reset All48
Information48
3
Chapter 01
Before Using the Product
Securing the Installation Space
Safety Precautions
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and
damage the product. Be sure to allow the amount of space as shown below or greater when installing
the product.
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER. (OR BACK)
――The exterior may differ depending on the product.
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
10 cm (3.93 Inches)
10 cm (3.93 Inches)
10 cm
(3.93 Inches)
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of
this product.
10 cm
(3.93 Inches)
This symbol alerts you that important literature concerning operation
and maintenance has been included with this product.
10 cm
(3.93 Inches)
Precautions for storage
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are
not followed.
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
――Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product
(Service fee will be charged.)
Do not press the monitor screen with hands or other objects. There is a risk of damaging the screen.
4
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
――Take the following steps when cleaning.
Electricity and Safety
Warning
1 Power off the product and computer.
•• Do not use a damaged power cord or plug, or a loose power socket.
2 Disconnect the power cord from the product.
•• Do not use multiple products with a single power socket.
――Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric
shock may result.
3 Wipe the monitor with a clean, soft and dry cloth.
‒‒ Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
‒‒ Do not spray water or detergent directly on the product.
•• Do not touch the power plug with wet hands.
•• Insert the power plug all the way in so it is not loose.
•• Connect the power plug to a grounded power socket (type 1 insulated devices only).
•• Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy
object.
4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
•• Do not place the power cord or product near heat sources.
5 Connect the power cord to the product when cleaning is finished.
•• Clean any dust around the pins of the power plug or the power socket with a dry cloth.
6 Power on the product and computer.
Caution
•• Do not disconnect the power cord while the product is being used.
•• Only use the power cord provided with your product by Samsung. Do not use the power cord with
other products.
•• Keep the power socket where the power cord is connected unobstructed.
‒‒ The power cord must be disconnected to cut off power to the product when an issue occurs.
•• Hold the plug when disconnecting the power cord from the power socket.
5
Installation
Warning
Caution
•• DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT
INSTALL THE PRODUCT NEAR HEAT SOURCES.
•• Do not drop the product while moving.
•• Do not install the product in poorly ventilated spaces such as a bookcase or closet.
•• Install the product at least 10 cm away from the wall to allow ventilation.
•• Keep the plastic packaging out of the reach of children.
‒‒ Children may suffocate.
•• Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.)
‒‒ The product may fall and become damaged and/or cause an injury.
‒‒ Using the product in an area with excess vibration may damage the product or cause a fire.
•• Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or
smoke.
•• Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
‒‒ The product lifespan may be reduced or a fire may result.
•• Do not set down the product on its front.
•• When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of
the product is not protruding.
‒‒ The product may fall and become damaged and/or cause an injury.
‒‒ Install the product only on cabinets or shelves of the right size.
•• Set down the product gently.
‒‒ Product failure or personal injury may result.
•• Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical
substances, extreme temperatures or a significant presence of moisture, or a place where
the product will operate continuously for an extended period of time) may seriously affect its
performance.
‒‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a
place.
•• Do not install the product within the reach of young children.
‒‒ The product may fall and injure children.
•• Edible oil (such as soybean oil) may damage or distort the product. Keep the product away from oil
pollution. And do not install or use the product in the kitchen or near the kitchen stove.
6
Operation
Warning
•• There is a high voltage inside the product. Never disassemble, repair or modify the product
yourself.
‒‒ Contact Samsung Customer Service Center for repairs.
•• To move the product, first disconnect all the cables from it, including the power cable.
•• If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord
immediately and contact Samsung Customer Service Center.
•• Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper,
matches, etc) into the product (via the vent or input/output ports, etc).
‒‒ Be sure to power off the product and disconnect the power cord when water or other foreign
substances have entered the product. Then contact Samsung Customer Service Center.
•• Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the
product.
‒‒ Be sure to power off the product and disconnect the power cord when water or other foreign
substances have entered the product. Then contact Samsung Customer Service Center.
•• Do not let children hang from the product or climb on top of it.
‒‒ Children may become injured or seriously harmed.
•• If the product is dropped or the outer case is damaged, turn off the power and disconnect the
power cord. Then contact Samsung Customer Service Center.
‒‒ Continued use can result in a fire or electric shock.
•• Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.
‒‒ The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a
serious injury.
•• During a lightning or thunderstorm, power off the product and remove the power cable.
•• Do not drop objects on the product or apply impact.
•• Do not move the product by pulling the power cord or any cable.
•• If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area
immediately.
•• Do not lift or move the product by pulling the power cord or any cable.
•• Do not use or keep combustible spray or an inflammable substance near the product.
•• Ensure the vents are not blocked by tablecloths or curtains.
‒‒ An increased internal temperature may cause a fire.
7
Caution
•• Leaving the screen fixed on a stationary image for an extended period of time may cause
afterimage burn-in or defective pixels.
‒‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the
product for an extended period of time.
•• Disconnect the power cord from the power socket if you do not plan on using the product for an
extended period of time (vacation, etc).
‒‒ Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
•• Use the product at the recommended resolution and frequency.
‒‒ Your eyesight may deteriorate.
•• Do not hold the product upside-down or move it by holding the stand.
‒‒ The product may fall and become damaged or cause an injury.
•• Looking at the screen too close for an extended period of time can deteriorate your eyesight.
•• Do not use humidifiers or stoves around the product.
•• Rest your eyes for more than 5 minutes or look at distance objects for every 1 hour of product use.
•• Do not touch the screen when the product has been turned on for an extended period of time as it
will become hot.
•• Store small accessories out of the reach of children.
•• Exercise caution when adjusting the product angle or stand height.
‒‒ Your hand or finger may get stuck and injured.
‒‒ Tilting the product at an excessive angle may cause the product to fall and an injury may result.
•• Do not place heavy objects on the product.
‒‒ Product failure or personal injury may result.
•• When using headphones or earphones, do not turn the volume too high.
‒‒ Having the sound too loud may damage your hearing.
8
Chapter 02
Preparations
Parts
Icons
Description
JOG Button
Multi directional button that helps navigate.
――The JOG button is located on the rear left side of the product. The
button can be used to move up, down, left or right, or as Enter.
Control Panel
This LED is power status indicator and works as
――The color and shape of parts may differ from what is shown. Specifications are subject to change without
•• Power On (Power button): Off
notice to improve quality.
Power LED
JOG Button
menu. (System
Power LED On) Actual models because of functional
variation maybe haven’t this function.
RIGHT
LEFT
Power LED
•• Power Off (Power button): On
――The power Indicator operation can be swapped by changing in the
UP
PRESS(ENTER)
•• Power saving mode: Blinking
Function Key Guide
Press the JOG button when the screen is turned on. The Function Key
Guide will appear. To access the onscreen menu when the guide is
displayed, press the corresponding direction button again.
――Function Key Guide may vary depending on the function or product
DOWN
model. Please refer to the actual product.
Return
Function Key Guide
9
Direct Key guide
――The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the computer resolution changes, or the input source changes.
――The function buttons page shows if Eye Saver Mode is enabled.
: On
: Off
Eye Saver Mode
Volume
Features
Eye Saver Mode Off
••
/
: Adjust Brightness, Contrast, Eye Saver Mode.
••
: Adjust Volume.
••
: Display Function Key Guide.
10
Function Key Guide
――To enter the main menu or to use other items, press the JOG button to display the Function Key Guide. You can exit by pressing the JOG button again.
UP/DOWN/LEFT/RIGHT: Move to the item you want. The description for each item will appear when the focus changes.
PRESS(ENTER): The selected item will be applied.
Return
Icons
Description
Selects
to change the input signal by moving the JOG button in the Function Key Guide screen. A message will appear on the top left corner of the screen if the input signal has
been changed.
Selects
by moving the JOG button in the function key guide screen.
The OSD (On Screen Display) of your Monitor’s feature appears.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
Enable/Disable: To lock/unlock the OSD control, press the LEFT button for 10 seconds when the main menu displayed.
――If the OSD control is locked, Brightness and Contrast can be adjusted. PIP/PBP is available.
Eye Saver Mode is available. Information can be viewed.
Selects
by moving the JOG button in the function key guide screen.
Press the button when configuring settings for the PIP/PBP function is required.
Selects
to turn the Monitor off by moving the JOG button in the function key guide screen.
――Actual models because of functional variation, Function key guide options will be different.
11
When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for
control source and power could be used as below.
JOG Button
Power saving/Non-signal mode
UP
Source Change
Down
PRESS(ENTER) for 2 seconds
Power Off
When the monitor displays the Main menu the JOG Button could be used as below.
JOG Button
Action
UP/DOWN
Move the option
Exit the Main menu.
LEFT
Close Sublist without saving value.
Value decreases in the slider.
RIGHT
PRESS(ENTER)
Move to next depth.
Value increases in the slider.
Move to next depth.
Save the value and close Sublist.
12
Changing Brightness, Contrast and Eye Saver Mode
settings
You can adjust Brightness, Contrast or Eye Saver Mode by moving the JOG button up or down, if no
OSD menu is displayed.
Changing the Volume setting
You can adjust Volume by moving the JOG button left or right, if no OSD menu is displayed.
50
Volume
Mute
Contrast
Off
Eye Saver Mode
――The displayed image may differ depending on the model.
Brightness
――If the audio quality of a connected input device is poor, the Auto Mute function on the product may mute
the sound or cause choppy audio when applying the headphones or speakers. Set the input volume for the
input device to at least 20% and control the volume using the volume control (JOG button LEFT/RIGHT) on
the product.
――What is Auto Mute?
――The displayed image may differ depending on the model.
Eye Saver Mode
――Not available when PIP/PBP Mode is set to On.
The function mutes the audio to improve sound effect when there is sound noise or when the input
signal is weak, usually due to a problem with the volume of an input device.
Brightness
――To activate the Mute function, access the Volume control screen, then use the JOG button to move the
――This menu is not available when SAMSUNG Bright is set to Dynamic Contrast mode.
MAGIC
focus down. To deactivate the Mute function, access the Volume control screen, then increase or decrease
the Volume.
――This menu is not available when Eco Saving Plus is enabled.
――This menu is not available when Eye Saver Mode is enabled.
Contrast
――This menu is not available when SAMSUNG Bright is in Cinema or Dynamic Contrast mode.
MAGIC
――This menu is not available when Game Mode is enabled.
――This menu is not available when PIP/PBP Mode is set to On and the Size is set to
(PBP Mode).
13
Reverse Side
――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Port
Description
Connect the power cord for your monitor to the POWER IN port on the back of the product.
DP OUT
HDMI IN
DP IN
Connects to another product using a DP cable.
Connects to a source device using an HDMI cable or HDMI-DVI cable.
Connects to a PC using a DP cable.
Connects to a source device using a USB Type-C cable. Compatible with a USB cable version 3.0 or lower.
Connect to a USB device.
Connect to an audio output device such as headphones.
14
Adjusting the Product Tilt and Height
Rotating the Monitor Screen
――The color and shape of parts may differ from what is shown. Specifications are subject to change without
――You can rotate your monitor as shown below.
――The color and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.
notice to improve quality.
-2.0° (±2.0°) ~ 92.0° (±2.0°)
1
2
3
4
5
6
-45.0° (±2.0°) ~ 45.0° (±2.0°)
-5.0° (±2.0°) ~ 24.0° (±2.0°)
0 ~ 135.0 mm (±5.0 mm)
•• Adjust the screen following the arrow direction.
•• Rotate the screen in clockwise direction till it becomes completely vertical to the desktop.
•• The monitor may get damaged if you rotate the screen without tilt, or counter clockwise direction.
•• The monitor tilt and height can be adjusted.
•• Hold the top center of the product and adjust the height carefully.
•• When adjusting the stand height, you may hear a noise. This noise is generated because the ball
inside the stand slides when the stand height is adjusted. It is a normal noise and not a product
malfunction.
15
Anti-theft Lock
Precautions for moving the monitor
――An anti-theft lock allows you to use the product securely even in public places.
――The locking device shape and locking method depend on the manufacturer. Refer to the user guide
provided with your anti-theft locking device for details.
To lock an anti-theft locking device:
•• Do not directly apply pressure on the screen.
•• Do not hold the screen when moving the
monitor.
1 Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2 Put one end of the cable through the loop on the other end.
•• Hold the lower corners or edges of the
monitor when moving it.
•• Do not hold the product upside down only by
the stand.
••
3 Insert the locking device into the anti-theft lock slot at the back of the product.
4 Lock the locking device.
‒‒ An anti-theft locking device can be purchased separately.
‒‒ Refer to the user guide provided with your anti-theft locking device for details.
‒‒ Anti-theft locking devices can be purchased at electronics retailers or online.
16
Installing a Wall-mount Kit or Desktop Stand
(S24H850QF*)
――Power the product off and remove the power cable from the power socket.
1
2
A
•• Notes
‒‒ Using a screw longer than the standard length can damage the internal components of the
product.
‒‒ The length of screws required for a wall mount that does not comply with the VESA standards
may vary depending on the specifications.
‒‒ Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper
screws or attaching the wall-mount kit or desktop stand using excessive force.
‒‒ Samsung shall not be held liable for any product damage or personal injury caused by using a
wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on
your own.
‒‒ To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10
cm or farther away from the wall.
‒‒ Be sure to use a wall-mount kit that complies with the national standards.
3
4
‒‒ To install the monitor using a wall mount, disconnect the stand base from the monitor.
Unit: mm (inches)
B
Model name
S24H850QF*
Attach the wall-mount kit or desktop stand here
VESA screw hole specs (A * B) in Standard Screw
millimeters
100.0 x 100.0 (3.9 x 3.9)
4.0 mm Φ, 0.7 pitch * 10.0 mm
long
Quantity
4 EA
――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.
Wall-mount bracket (optional)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
17
Installing a Wall-mount Kit or Desktop Stand
(S27H850QF*)
――Power the product off and remove the power cable from the power socket.
1
2
A
•• Notes
‒‒ Using a screw longer than the standard length can damage the internal components of the
product.
‒‒ The length of screws required for a wall mount that does not comply with the VESA standards
may vary depending on the specifications.
‒‒ Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper
screws or attaching the wall-mount kit or desktop stand using excessive force.
‒‒ Samsung shall not be held liable for any product damage or personal injury caused by using a
wall-mount kit other than the one specified or from an attempt to install the wall-mount kit on
your own.
‒‒ To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10
cm or farther away from the wall.
‒‒ Be sure to use a wall-mount kit that complies with the national standards.
3
4
‒‒ To install the monitor using a wall mount, disconnect the stand base from the monitor.
Unit: mm (inches)
B
Model name
S27H850QF*
Attach the wall-mount kit or desktop stand here
VESA screw hole specs (A * B) in Standard Screw
millimeters
100.0 x 100.0 (3.9 x 3.9)
4.0 mm Φ, 0.7 pitch * 10.0 mm
long
Quantity
4 EA
――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.
Wall-mount bracket (optional)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
18
Installation
Attaching the Stand (S24H850QF*)
――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
――The exterior may differ depending on the product.
1
Insert the stand neck into the stand base in the
direction shown in the figure. Tightly fasten the
connecting screw at the bottom of the stand base.
3
2
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image.
Place the stand neck on the display, as shown in
the figure. When you place the stand neck, ensure
that the raised button on the display can be
inserted into the groove of the stand neck.
4
Turn the stand neck of the display clockwise for 90°
to ensure that the stand neck of the display is put
into place.
If Styrofoam is unavailable, use a thick sitting mat.
5
Stand assembly is complete.
- Caution
Do not hold the product upside down only by the stand.
19
Attaching the Stand (S27H850QF*)
――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
――The exterior may differ depending on the product.
1
Insert the stand neck into the stand base in the
direction shown in the figure. Tightly fasten the
connecting screw at the bottom of the stand base.
3
2
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image.
4
Place the stand neck on the display, as shown in the Turn the stand neck of the display clockwise for 90°
figure. When you place the stand neck, ensure that to ensure that the stand neck of the display is put
the raised button on the display can be inserted
into place.
into the groove of the stand neck.
If Styrofoam is unavailable, use a thick sitting mat.
5
Stand assembly is complete.
- Caution
Do not hold the product upside down only by the stand.
20
Removing the Stand (S24H850QF*)
――Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
――The exterior may differ depending on the product.
1
2
Place the product on a clean and flat floor as shown in
Lift the stand neck in the arrow direction to detach it
the figure. Push the key upward and hold. Turn the stand from the display.
neck of the display counterclockwise for 10°.
- Caution
- Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
Do not hold the product upside down only by the stand.
3
Unfasten the connecting screw at the bottom of the
stand base, and then remove the stand neck from the
stand base by pulling it in the arrow direction, as shown
in the figure.
21
Removing the Stand (S27H850QF*)
――Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
――The exterior may differ depending on the product.
1
2
Place the product on a clean and flat floor as shown in
Lift the stand neck in the arrow direction to detach it
the figure. Push the key upward and hold. Turn the stand from the display.
neck of the display counterclockwise for 10°.
- Caution
- Caution
Do not press down on the monitor. There is a risk of
damaging the monitor.
Do not hold the product upside down only by the stand.
3
Unfasten the connecting screw at the bottom of the
stand base, and then remove the stand neck from the
stand base by pulling it in the arrow direction, as shown
in the figure.
22
Chapter 03
Connecting and Using a Source Device
Read below before installing the monitor.
Connecting and Using a PC
1 Check the shapes of both ends of the cables that came with the monitor, and check the shapes and
Select a connection method suitable for your PC.
2 Before connecting signal cables, disconnect the power cables for the monitor and external devices
――Provided ports may vary depending on the product.
3 After connecting all signal cables, connect the power cables for the monitor and external devices
Connection Using the HDMI Cable
positions of the matching ports on the monitor and external devices.
――Connecting parts may differ in different products.
from the power outlet to prevent device damage from a short circuit or overcurrent.
to the power outlet.
4 Read the user manual to familiarize yourself with the monitor functions, precautions, and proper
use, before using the installed monitor.
Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.
HDMI IN
――To display 2560 x 1440 @ 60 Hz, use an HDMI cable that supports 2560 x 1440 @ 60 Hz. Make sure that the
graphics card of the HDMI source supports 2560 x 1440 @ 60 Hz.
――When connecting an HDMI cable, use the cable that came with the components of the monitor. If you use
an HDMI cable other than provided by Samsung, the image quality may be degraded.
23
Connection Using the HDMI-DVI Cable
Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.
Connection Using the USB Type-C Cable
Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.
HDMI IN
――The audio function is not supported if the source device is connected using the HDMI-DVI cable.
――The optimum resolution may not be available with an HDMI-DVI cable.
――When a device outputs signals to the monitor using a USB Type-C cable, if the screen is not displayed
normally, change the DP OUT output mode (switch the output mode between USB Type-C:MST and USB
Type-C:SST).
According to the USB Power Delivery 2.0 specification, our product can charge your notebook when you
connect it to our product with a USB Type-C cable.
――A maximum charging power of 45 W is supported. Charging speed may vary depending on the notebook
connected to our product.
――Because notebooks with a USB Type-C port released on the market are very various, we cannot guarantee
that our product can charge all types of notebooks with a USB Type-C port.
――Make sure that the USB Type-C cable complies with the USB PD specification. Otherwise, your devices may
be damaged. A Samsung branded cable is recommended.
24
Connection Using the DP Cable
Connecting an External Monitor
Check to make sure that the power cables for the monitor and external devices, such as
computers and set-top boxes, are not connected to the power outlet.
Connection Using an DP Cable
DP OUT
――To display 2560 x 1440 @ 60 Hz, use a DP cable that supports 2560 x 1440 @ 60 Hz. Make sure that the
graphics card of the DP source supports 2560 x 1440 @ 60 Hz.
――A DP cable shorter under 1.5 m in length is recommended. Using a cable longer than 1.5 m can affect the
picture quality.
Connecting to Headphones
25
Connecting the Product to a PC as a USB HUB
Utilizing the Product as a USB HUB
Using the product as a hub, connect and use various source devices with the product at the same time.
Connecting a PC to the Product
――The product can function as a HUB by connecting to a PC via a USB Type-C cable. You can connect a source
A PC cannot connect to multiple source devices at the same time as it has a limited number of input/
output ports available. The HUB feature on the product will improve your work efficiency by allowing
you to connect multiple source devices to the USB ports on the product at the same time without
connecting them to a PC.
device directly to the product and control the device from the product, without having to connect the
device to the PC.
To use the product as a USB hub, connect the product to a PC using a USB Type-C cable.
If multiple source devices are connected to the PC, the many cables around the PC may look messy.
Connecting the devices directly to the product will resolve such inconvenience.
Connect a mobile device such as an MP3 player or smartphone to the product when connected to a PC.
This allows you to control the device from the PC or charge the device battery.
――The read/write rate will be affected by the USB device and your PC.
――The product does not support media play. If you need to play a file in your USB device, please connect the
product as a Hub to your PC and play the file on your PC.
――For USB-related problems caused by OS, drive programs or software, please contact relevant suppliers.
――With the launch of various USB devices on the market, we cannot guarantee that our products are matched
with all USB devices.
26
――For an external mass-storage HDD requiring external power supply, be sure to connect it to a power source.
――The battery can be charged in the power-saving mode, but it cannot be charged when the product is
powered off.
――Charging your USB device is not possible if the power cable is disconnected from the power socket.
――The USB device needs to be purchased separately.
27
Tidying Up the Connected Cables (S24H850QF*)
1
Stand assembly is complete.
2
Rotate the machine to the highest vertical
position.
3
Connect the cables to their correct ports, and then
arrange each of the two cables through either
side of the COVER-STAND CABLE, as shown in the
figure.
4
Rotate the machine to the horizontal position.
5
Assembly is complete.
28
Tidying Up the Connected Cables (S27H850QF*)
1
Tilt the display, as shown in the figure.
5
2
Rotate the machine to the highest vertical
position.
6
Arrange each of the two cables through either side Rotate the machine to the horizontal position.
of the COVER-STAND CABLE, as shown in the figure.
3
Connect the corresponding cables.
4
4
Arrange the cables through the groove on the
COVER-REAR, and then attach the COVER-REAR
SUB. When you attach the COVER-REAR SUB,
please aim six ribs of the COVER-REAR SUB to
the bottom holes of the COVER-REAR at first.
7
Assembly is complete.
29
Connecting the Power
POWER IN
To use the product, connect the power cable to a power outlet and the POWER IN port on the product.
――The input voltage is switched automatically.
30
Correct posture to use the product
Driver Installation
――You can set the optimum resolution and frequency for this product by installing the corresponding drivers.
――To install the latest version of the product driver, download it from the Samsung Electronics website at
http://www.samsung.com.
Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for
the first time after purchase.
Select a language on the product and change the resolution on your PC to the optimum setting.
Use the product in the correct posture as follows:
•• Straighten your back.
――If the optimum resolution is not selected, the message will appear up to three times for a specified time
even when the product is turned off and on again.
――The optimum resolution can also be selected in Control Panel on your PC.
•• Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at
the screen.
•• Keep your eyes directly in front of the screen.
•• Adjust the angle so light does not reflect on the screen.
•• Keep your forearms perpendicular to your upper arms and level with the back of your hands.
•• Keep your elbows at about a right angle.
•• Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your heels
attached to the floor, and your arms lower than your heart.
•• Do the Eye excercises or blink frequently,then eye fatigue will be relieved.
31
Chapter 04
Screen Setup
Configure the screen settings such as brightness.
A detailed description of each function is provided. Refer to your product for details.
――The functions available may vary depending on the product model. The color and shape of parts may differ
from what is shown. Specifications are subject to change without notice to improve quality.
In PC mode
•• Custom: Customize the contrast and brightness as required.
•• Standard: Obtain a picture quality suitable for editing documents or using Internet.
SAMSUNG MAGIC Bright
•• Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.
This menu provides an optimum picture quality suitable for the environment where the product will be
used.
In AV mode
――This menu is not available when Smart ECO Saving is enabled.
――This menu is not available when Game Mode is enabled.
――This menu is not available when Eye Saver Mode is enabled.
――Not available when PIP/PBP Mode is set to On.
You can customize the brightness to suit your preferences.
•• Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
When the external input is connected through HDMI/DP/USB Type-C and PC/AV Mode is set to AV,
SAMSUNG
MAGICBright has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are
preset at the factory. You can activate either Dynamic, Standard, Movie or Custom. You can select
Custom which automatically recalls your personalized picture settings.
•• Dynamic: Select this mode to view a sharper image than in Standard mode.
•• Standard: Select this mode when the surroundings are bright. This also provides a sharp image.
•• Movie: Select this mode when the surroundings are dark. This will save power and reduce eye
fatigue.
•• Custom: Select this mode when you want to adjust the image according to your preferences.
32
Brightness
Color
You can adjust the general brightness of the picture. (Range: 0~100)
Adjust the tint of the screen.
A higher value will make the picture appear brighter.
――This menu is not available when SAMSUNG Bright is set to Cinema or Dynamic Contrast mode.
――This menu is not available when SAMSUNG Bright is set to Dynamic Contrast mode.
――This menu is not available when Game Mode is enabled.
――This menu is not available when Smart ECO Saving is enabled.
――This menu is not available when Eye Saver Mode is enabled.
――Not available when PIP/PBP Mode is set to On.
MAGIC
MAGIC
――This menu is not available when Eye Saver Mode is enabled.
•• Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.
•• Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the color.
Contrast
•• Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.
•• Color Tone: Select a color tone that best suits your viewing needs.
Adjust the contrast between the objects and background. (Range: 0~100)
‒‒ Cool 2: Set the color temperature to be cooler than Cool 1.
A higher value will increase the contrast to make the object appear clearer.
‒‒ Cool 1: Set the color temperature to be cooler than Normal mode.
――This option is not available when SAMSUNG Bright is in Cinema or Dynamic Contrast mode.
MAGIC
――This menu is not available when Game Mode is enabled.
――This menu is not available when PIP/PBP Mode is set to On and the Size is set to
‒‒ Normal: Display the standard color tone.
‒‒ Warm 1: Set the color temperature to be warmer than Normal mode.
(PBP Mode).
‒‒ Warm 2: Set the color temperature to be warmer than Warm 1.
‒‒ Custom: Customize the color tone.
――When the external input is connected through HDMI/DP/USB Type-C and PC/AV Mode is set to AV, Color
Sharpness
Tone has four color temperature settings (Cool, Normal, Warm and Custom).
•• Gamma: Adjust the middle level of luminance.
Make the outline of objects more clear or blurry. (Range: 0~100)
‒‒ Mode1 / Mode2 / Mode3
A higher value will make the outline of objects clearer.
――This option is not available when SAMSUNG Bright is in Cinema or Dynamic Contrast mode.
――This menu is not available when
MAGIC
SAMSUNG
MAGICUpscale is in Mode1 or Mode2 mode.
――This menu is not available when Game Mode is enabled.
――Not available when PIP/PBP Mode is set to On.
33
SAMSUNG MAGIC Upscale
Eye Saver Mode
MAGICUpscale function
Set to an optimum picture quality suitable for eye relaxation.
SAMSUNG
can enhance the layers of the picture details and the vividness of the picture.
The function has more obvious effects on low-resolution pictures.
――This menu is not available when SAMSUNG Bright is set to Cinema or Dynamic Contrast mode.
MAGIC
――This menu is not available when Game Mode is enabled.
――Not available when PIP/PBP Mode is set to On.
•• Off / Mode1 / Mode2
――Comparing with Mode1, Mode2 has a stronger effect.
HDMI Black Level
TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for
lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm
will decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same
time, the blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and
certified as it met the requirements of TÜV Rheinland “Low Blue Light Content” standards.
――Not available when PIP/PBP Mode is set to On.
Game Mode
Configure the product screen settings for game mode.
If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/
color degradation, black level, etc.) may occur, depending on the connected source device. In such case,
HDMI Black Level can be used to adjust the image quality.
Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™
is connected.
If this is the case, correct the degraded picture quality using HDMI Black Level.
――This menu is not available when Smart ECO Saving is enabled.
――This function is only available in HDMI mode.
――Not available when PIP/PBP Mode is set to On.
•• Normal: Select this mode when there is no contrast ratio degradation.
•• Low: Select this mode to reduce the black level and increase the white level when there is a
contrast ratio degradation.
――HDMI Black Level may not be compatible with some source devices.
――The HDMI Black Level feature is only activated at a certain AV resolution, such as 720P and 1080P.
――This menu is not available when Eye Saver Mode is enabled.
――When the monitor turns off, enters power-saving mode or changes input sources, Game Mode turns Off
even if it is set to On.
――If you want to keep Game Mode enabled all the time, select Always On.
――Not available when PIP/PBP Mode is set to On.
Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
――Use Standard mode when not playing a video or game.
――This menu is not available when PIP/PBP Mode is set to On and the Size is set to
/
(PIP Mode).
34
Picture Size
Screen Adjustment
Change the picture size.
――This menu is only available when Picture Size is set to Screen Fit in AV Mode.
――This menu is not available when PIP/PBP Mode is set to On and the Size is set to
――This option is not available when FreeSync is enabled.
(PBP Mode).
When a 480P or 576P or 720P or 1080P signal is input in AV mode and the monitor can display normally,
select Screen Fit to adjust horizontal position in 0-6 levels.
In PC mode
Configuring H-Position & V-Position
•• Auto: Display the picture according to the aspect ratio of the input source.
H-Position: Move the screen to the left or right.
•• Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
V-Position: Move the screen up or down.
In AV mode
•• 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
•• 16:9: Display the picture with an aspect ratio of 16:9.
•• Screen Fit: Display the picture with the original aspect ratio without cutting off.
――The function may not be supported depending on the ports provided with the product.
――Changing the screen size is available when the following conditions are satisfied.
――A digital output device is connected using the HDMI/DP/USB Type-C cable.
――The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).
――This can only be set when the external input is connected through HDMI/DP/USB Type-C and PC/AV
Mode is set to AV.
35
Chapter 05
Configuring the PIP/PBP Settings
A detailed description of each function is provided. Refer to your product for details.
――The functions available may vary depending on the product model. The color and shape of parts may differ
from what is shown. Specifications are subject to change without notice to improve quality.
――PIP/PBP mode is compatible with Windows 7, Windows 8, and Windows 10.
――The PIP/PBP function may not be available depending on the specifications of the graphics card used. If the
screen is blank in PIP/PBP mode when the optimum resolution is selected, go to Control Panel → Display →
Screen Resolution and click Detect on the PC. (Instructions are based on Windows 7.) If the screen is blank
PIP/PBP Mode
Enable or disable the PIP/PBP Mode function.
The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed
on the main screen at the same time the another source device is displayed in inset windows.
The PBP (Picture by Picture) function separates the screen in half displaying output from two different
source devices simultaneously on the left and right sides of the screen.
when the resolution is set to the optimum resolution, change the resolution to 1280 x 1024.
――The screen may flicker briefly or appear after a delay when you enable or disable the PIP/PBP function or
when you change the screen size with the PIP/PBP function activated.
This can typically arise when a PC and a monitor are connected to two or more input sources. It has nothing
to do with the performance of a monitor.
The issue is mainly caused when the video signals are delayed in transmission to the monitor depending on
the graphics card performance.
――When the PIP/PBP function is enabled, the resolution will not be able to automatically switch to the
optimum resolution due to a compatibility issue between the graphics card and the Windows system.
Set PIP/PBP Mode to Off. Alternatively, restart the monitor, then set the resolution to the optimum setting
using the Windows interface.
36
Size
Sound Source
Select the size and aspect ratio of the sub-screen.
Set which screen you want to hear the sound for.
••
: Select the icon image if you want to use PBP mode where the optimum resolution for the left
and right sides of the screen is 1280 x 1440 (width x height).
••
: Select the icon image if you want to use PIP mode where the optimum resolution for the subscreen is 720 x 480 (width x height).
••
: Select the icon image if you want to use PIP mode where the optimum resolution of the subscreen is 1280 x 720 (width x height).
PIP mode
/
PBP mode
/
Position
Select the position of the sub-screen from the available options.
••
/
/
/
――Not available when PBP is selected.
――The screen may flicker if the input signal is unstable.
37
Source
Picture Size
Select the source for each screen.
PIP Mode (available in PIP mode(Size
/
PIP Mode (available in PIP mode (Size
))
/
))
Select the image size for sub-screen.
――The input source for the main screen changes.
――With the exception of the current input source, the other two input sources can be selected.
In PC mode
――The screen may flicker if the input signal is unstable.
•• Auto: Display the picture according to the aspect ratio of the each screen input source.
――When the Function Key Guide appears, move the JOG button LEFT to select the
•• Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
icon and then press the
JOG button. The main screen will switch in the order HDMI → DisplayPort → USB Type-C.
PBP Mode (available in PBP mode(Size
In AV mode
))
•• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
――The input source for the main screen changes.
――The screen may flicker if the input signal is unstable.
――When the input signal of the left and right screens are the same, the operation cannot be performed.
――When the Function Key Guide appears, move the JOG button LEFT to select the
JOG button. The same PBP source setting menu appears.
icon and then press the
•• 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
•• Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
――The function may not be supported depending on the ports provided with the product.
――Changing the screen size is available when the following conditions are satisfied.
――A digital output device is connected using the HDMI/DP/USB Type-C cable.
――The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).
――This can only be set when the external input is connected through HDMI/DP/USB Type-C and PC/AV
Mode is set to AV.
38
PBP Mode (available in PBP mode(Size
))
Contrast
Set the Picture Size for each of the divided screens.
In PC mode
•• Auto: Display the picture according to the aspect ratio of the each screen input source.
•• Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
In AV mode
•• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
PIP Mode (available in PIP mode(Size
/
))
Adjust the contrast level for sub-screen.
PBP Mode (available in PBP mode(Size
))
Adjust the contrast level for each screen.
•• 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
•• Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
――The function may not be supported depending on the ports provided with the product.
――Changing the screen size is available when the following conditions are satisfied.
――A digital output device is connected using the HDMI/DP/USB Type-C cable.
――The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).
――This can only be set when the external input is connected through HDMI/DP/USB Type-C and PC/AV
Mode is set to AV.
39
Chapter 06
Adjusting OSD (On Screen Display) settings
A detailed description of each function is provided. Refer to your product for details.
――The functions available may vary depending on the product model. The color and shape of parts may differ
from what is shown. Specifications are subject to change without notice to improve quality.
Language
Set the menu language.
Transparency
――A change to the language setting will only be applied to the onscreen menu display.
――It will not be applied to other functions on your PC.
Set the transparency for the menu windows.
Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
40
Chapter 07
Setup and Reset
A detailed description of each function is provided. Refer to your product for details.
――The functions available may vary depending on the product model. The color and shape of parts may differ
from what is shown. Specifications are subject to change without notice to improve quality.
DisplayPort Ver.
Select your DisplayPort version.
――Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
――If the monitor is in HDMI/DisplayPort/USB Type-C mode and the screen says Check Signal Cable or power
saving mode activates, press the JOG button to display the function-button screen and then select the
icon. You can select 1.1 or 1.2↑.
41
DP OUT
DP OUT (MST/SST) Function Implementation
Select the input signal to output to the next monitor and the output mode to simplify the connection
and control of displaying devices.
Connecting a PC via DisplayPort
――If the MST mode is selected for DP OUT, FreeSync is not supported for all connected monitors.
PC
Monitor 1
Monitor 2
Screen A
Screen B
――Before selecting the MST mode for DP OUT, make sure that the device supports DisplayPort:MST (Daisy
Chain)/HBR2 (High Bit Rate). Incorrect settings may lead to black screen or inconsistency between the
actual output mode and the selected output mode. If a black screen occurs, change the DP OUT output
mode.
MST
•• MST/SST: A technology used for connection and driving of multi-stream display signals.
DP Cable
‒‒ MST: Stands for Multi-Stream Transport. Can transport multiple video and audio streams, but
needs the support of both the drive capacity of the graphics card and the resolution of the
monitor.
DP IN
DP OUT
DP Cable
DP IN
OSD → DisplayPort:MST
PC
‒‒ SST: Stands for Single Stream Transport. Can transport only a combination of a single video
stream and a single audio stream.
•• DP OUT mode: 5 modes
USB Type-C:MST
SST
USB Type-C:SST
DP Cable
DP IN
Monitor 1
Monitor 2
Screen A
Screen A
DP OUT
DP Cable
DP IN
DisplayPort:MST
OSD → DisplayPort:SST
DisplayPort:SST
HDMI:SST
•• Make sure that the graphics card supports the MST (Daisy Chain) function. To check this, visit the
website of the graphics card manufacturer.
•• The output mode of DP OUT varies with the settings of DisplayPort Ver. When DisplayPort Ver. is
set to 1.1, DP OUT only supports SST.
•• When connecting a PC using DP cable, you must set DP OUT mode to "DisplayPort: MST (SST)" on
the OSD menu. (OSD – System – DP OUT - DisplayPort:MST/DisplayPort:SST)
•
Because of the bandwidth limit of DisplayPort Ver. 1.2, up to two 2560 x 1440 @ 60 Hz monitors
can be connected and used. But this specification may vary depending on the cable used and the
performance of the graphics card.
42
•• When this function is available, the following may occur: flashing screen or black screen, which
depends on the type of the previous device used and the quality of the cable used. Try to use a
Samsung branded cable, and visit the website of the graphics card manufacturer to check and
update its driver with the latest version.
Connecting a PC via USB Type-C port
PC
Monitor 1
•• A Samsung branded cable is recommended.
Monitor 2
Screen A
USB Type-C
Cable
MST
Screen B
DP Cable
DP OUT
DP IN
OSD → USB Type-C:MST
PC
SST
Monitor 1
USB Type-C
Cable
Monitor 2
Screen A
Screen A
DP Cable
DP OUT
DP IN
OSD → USB Type-C:SST
•• Make sure that the graphics card supports the MST (Daisy Chain) function. To check this, visit the
website of the graphics card manufacturer.
•• When connecting a PC using USB Type-C cable, you must set DP OUT mode to "USB Type-C: MST
(SST)" on the OSD menu. (OSD – System – DP OUT - USB Type-C:MST/USB Type-C:SST)
― The quantity of available monitors may vary depending on the cable used and the performance of the
graphics card.
•
When this function is available, the following may occur: flashing screen or black screen, which
depends on the type of the previous device used and the quality of the cable used. Try to use a
Samsung branded cable, and visit the website of the graphics card manufacturer to check and
update its driver with the latest version.
•
A Samsung branded cable is recommended.
43
Connecting a PC via HDMI port
PC
When the MST function is not supported
Monitor 1
Monitor 2
1 Make sure that the cable is connected correctly and DP OUT mode is set correctly on the OSD
menu. Refer to DP OUT (MST/SST) Function Implementation.
SST
Screen A
Screen A
HDMI Cable
HDMI IN
DP OUT
DP Cable
DP IN
2 Make sure that the graphics card can support the MST (Daisy Chain) function. To check this, visit
the website of the graphics card manufacturer.
3 HDMI sources can only support “HDMI: SST” mode. When DisplayPort Ver. is set to 1.1, DP OUT only
supports SST for the DP source.
OSD → HDMI:SST
4 Check and ensure the following setting: Right-click the Windows desktop → Click Screen
resolution (or click Display settings for Windows 10). Make sure that MST is enabled: Check if the
•• When connecting a PC using HDMI cable, you must set DP OUT mode to "HDMI: SST" on the OSD
menu. (OSD – System – DP OUT - HDMI:SST)
•• HDMI sources can only support "HDMI:SST" mode.
•• When this function is available, the following may occur: flashing screen or black screen, which
depends on the type of the previous device used and the quality of the cable used. Try to use a
Samsung branded cable, and visit the website of the graphics card manufacturer to check and
update its driver with the latest version.
Multiple displays list is set to "Extend these displays". If a different value is set, change to "Extend
these displays".
Windows 7
•• A Samsung branded cable is recommended.
Windows 10
44
FreeSync
The models in the Graphic Cards list supports FreeSync
FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency.
This feature will eliminate screen tearing and lag during game play. Improve your gaming experience.
•• Off: Disable FreeSync.
•• Standard Engine: Enable the basic FreeSync functions of the AMD graphics card.
•• Ultimate Engine: Enable the FreeSync feature with a higher screen frame rate. Screen tearing
(abnormal sync between the screen and content) is reduced in this mode. Note that screen
flickering may occur during game play.
When enable FreeSync function, please use maximum screen refresh rate for optimal freesync effect.
The refresh rate setting method please refer to Q & A
How can I change the frequency?
――When using the FreeSync function, use the HDMI/DP cable provided by the monitor manufacturer.
――This function is not available for USB Type-C port.
If you use the FreeSync function while playing a game, the following symptoms may occur:
•• The screen may flicker depending on the type of graphics card, the game option settings, or the
video being played. Try the following actions: decrease the game setting values, change the
current FreeSync mode to Standard Engine, or visit the AMD website to check your graphics driver’s
version and update it with the latest one.
FreeSync can only be used with specific AMD graphics card models. Refer to the following list for
supported graphics cards:
Make sure to install the latest official graphics drivers from AMD that support FreeSync.
――For additional AMD graphics card models that support the FreeSync feature, visit the official AMD website.
――Select FreeSync Off if you are using a graphics card from a different manufacturer.
•• AMD Radeon R9 300 Series (Not include 370 / 370X)
•• AMD Radeon R9 290
•• AMD Radeon R9 Fury X
•• AMD Radeon R9 285
•• AMD Radeon R7 360
•• AMD Radeon R7 260X
•• AMD Radeon R9 295X2
•• AMD Radeon R7 260
•• AMD Radeon R9 290X
•• AMD Radeon RX 400 Series
How do you enable FreeSync?
1 Set FreeSync to Standard Engine or Ultimate Engine in the OSD menu.
2 Enable FreeSync in AMD Radeon Settings:
Right-click the mouse
AMD Radeon Settings
Display
The "AMD FreeSync" feature should be set to "On". Select to "On" if not already enabled.
•• While you are using the FreeSync function, the screen may flicker due to variation of the output
frequency from the graphics card.
•• The response rate during the game may fluctuate depending on the resolution. A higher resolution
generally decreases the response rate.
•• The sound quality of the monitor may be degraded.
――If you encounter any issues when using the function, contact the Samsung Service Center.
45
46
Smart ECO Saving
PC/AV Mode
The Smart ECO Saving function reduces power consumption by controlling the electric current used by
the monitor panel.
Set PC/AV Mode to AV. The picture size will be enlarged.
――This menu is not available when Eye Saver Mode is enabled.
•• Off: Deactivate the Smart ECO Saving function.
•• On: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
This option is useful when you view a movie.
•• Set to PC when connected to a PC.
•• Set to AV when connected to an AV device.
――Supplied for the wide models only such as 16:9 or 16:10.
――If the monitor is in HDMI/DisplayPort/USB Type-C mode and the screen says Check Signal Cable or power
saving mode activates, press the JOG button to display the function-button screen and then select the
Off Timer Plus
icon. You can select PC or AV.
Configuring Off Timer
Off Timer: Turn on Off Timer mode.
Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
power off after the specified number of hours.
――This option is only available when Off Timer is set to On.
――For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer
to activate, go to
System
Off Timer Plus and set Off Timer to Off.
Configuring Eco Timer
Eco Timer: Turn on Eco Timer mode.
Eco Off After: The Eco Timer can be set between 10 and 180 minutes. The product will automatically
power off after the specified time has elapsed.
――This option is only available when Eco Timer is set to On.
47
Source Detection
Information
Select either Auto or Manual as the method to recognize input signal.
View the current input source, frequency and resolution.
――This menu is not available when the MST mode is selected for DP OUT.
Key Repeat Time
Control the response rate of a button when the button is pressed.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds only once
when a button is pressed.
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
•• Working: The power LED is on when the product is turned on.
•• Stand-by: The power LED is on when the product is turned off.
Reset All
Return all the settings for the product to the default factory settings.
48
Chapter 08
Installing the Software
Easy Setting Box
System Requirements
OS
Easy Setting Box enables users to use the monitor by partitioning multiple sections.
To install the latest version of Easy Setting Box, download it from the Samsung Electronics website at
http://www.samsung.com.
――The software may not work properly if you do not restart the computer after the installation.
Hardware
•• Windows XP 32Bit/64Bit
•• At least 32MB of memory
•• Windows Vista 32Bit/64Bit
•• At least 60MB of free space on the hard disk drive
•• Windows 7 32Bit/64Bit
•• Windows 8 32Bit/64Bit
•• Windows 8.1 32Bit/64Bit
•• Windows 10 32Bit/64Bit
――The Easy Setting Box icon may not appear depending on the computer system and the product
specifications.
――If the shortcut icon does not appear, press the F5 key.
Restrictions and Problems with the Installation
The Easy Setting Box installation may be affected by the Graphics Card, Motherboard and the
Networking Environment.
49
Chapter 09
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Center
――Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center.
Check the following.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connectors are locked.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected
to a PC, perform a self-diagnosis test.
1 Power off both the PC and product.
2
Disconnect the cables from the product.
3 Power on the product.
4 If the message Check Signal Cable appears, the product is working normally.
Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected
to the product and PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the
screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust
the screen settings.)
――If the screen remains blank, check the PC system, video controller and cable.
Checking the Resolution and Frequency
For a mode that exceeds the supported resolution(refer to Standard Signal Mode Table), the message
Not Optimum Mode will appear for a short time.
――The displayed resolution may vary, depending on the computer system settings and cables.
Screen issue
The power LED is off. The screen will not switch on.
Check that the power cable is connected properly.
The message Check Signal Cable appears.
Check that the cable is properly connected to the product.
Check that the device connected to the product is powered on.
50
Not Optimum Mode is displayed.
Video playback is choppy.
This message appears when the signal from the graphics card exceeds the maximum resolution or
frequency for the product.
Playback of high-definition large video files can be choppy. This may be because the video player is
not optimized for the computer resource.
Change the maximum resolution and frequency to suit the product performance, referring to
Standard Signal Mode Table (P.54).
Try playing the file on another video player.
The images on the screen look distorted.
Check the cable connection to the product.
Sound issue
The screen is not clear. The screen is blurry.
There is no sound.
Remove any accessories (video extension cable, etc.) and try again.
Check the connection of the audio cable or adjust the volume.
Set the resolution and frequency to the recommended level.
Check the volume.
The screen appears unstable and shaky. There are shadows or ghost images left on the screen.
The volume is too low.
Check that the resolution and frequency for the PC are within the range of resolution and frequency
compatible with the product. Next, if required, change the settings, referring to Standard Signal
Mode Table (P.54) in this manual and the Information menu on the product.
Adjust the volume.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software program.
Video is available but there is no sound.
Sound cannot be heard if a HDMI-DVI cable is used to connect the input device.
Connect the device using an HDMI cable, DP cable or USB Type-C cable.
Change the Color settings.
The colors on the screen have a shadow and are distorted.
Change the Color settings.
Source device issue
White does not really look white.
A beeping sound is heard when my PC is booting.
Change the Color settings.
If a beeping sound is heard when your PC is booting, have your PC serviced.
There is no image on the screen and the power LED blinks every 0.5 to 1 second.
The product is operating in power-saving mode.
――The LED lights on the frame of the product may be seen depending on the user's viewing angle. The light is
harmless to people and has no bearing on product features and performance. The product is safe to use.
Press any key on the keyboard or move the mouse to return to normal operating mode.
Text is blurry.
If using a Windows OS (e.g. Windows 7, Windows 8, Windows 8.1 or Windows 10): Go to Control Panel
Fonts
Adjust ClearType text and change Turn on ClearType.
51
Q&A
――Refer to the user manual for your PC or graphics card for further instructions on adjustment.
How can I change the frequency?
Set the frequency on your graphics card.
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings → Advanced → Monitor, and adjust Refresh rate under Monitor settings.
•• Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor, and adjust Refresh rate under Monitor settings.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalization → Display Settings → Advanced Settings → Monitor, and adjust Refresh rate under Monitor settings.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Refresh rate under Monitor settings.
•• Windows 8(Windows 8.1): Go to Settings → Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Refresh rate under Monitor settings.
•• Windows 10: Go to Settings → System → Display → Advanced display settings → Display adapter properties → Monitor, and adjust Screen refresh rate under Monitor settings.
How can I change the resolution?
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings, and adjust the resolution.
•• Windows ME/2000: Go to Control Panel → Display → Settings, and adjust the resolution.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize → Display Settings, and adjust the resolution.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust Resolution, and adjust the resolution.
•• Windows 8(Windows 8.1): Go to Settings → Control Panel → Appearance and Personalization → Display → Adjust Resolution, and adjust the resolution.
•• Windows 10: Go to Settings → System → Display → Advanced display settings, and adjust the resolution.
How do I set power-saving mode?
•• Windows XP: Set power-saving mode in Control Panel → Appearance and Themes → Display → Screen Saver Settings → Power options or BIOS SETUP on the PC.
•• Windows ME/2000: Set power-saving mode in Control Panel → Display → Screen Saver Settings → Power options or BIOS SETUP on the PC.
•• Windows Vista: Set power-saving mode in Control Panel → Appearance and Personalization → Personalize → Screen Saver Settings → Power options or BIOS SETUP on the PC.
•• Windows 7: Set power-saving mode in Control Panel → Appearance and Personalization → Personalize → Screen Saver Settings → Power options or BIOS SETUP on the PC.
•• Windows 8(Windows 8.1): Set power-saving mode in Settings → Control Panel → Appearance and Personalization → Personalize → Screen Saver Settings → Power options or BIOS SETUP on the PC.
•• Windows 10: Set power-saving mode in Settings → Personalization → Lock screen → Screen timeout settings → Power & sleep or BIOS SETUP on the PC.
52
Chapter 10
Specifications
General
Model Name
S24H850QF*
S27H850QF*
Size
24 Class (23.8 Inches / 60.4 cm)
27 Class (26.9 Inches / 68.4 cm)
Display area
526.848 mm (H) x 296.352 mm (V)
596.74 mm (H) x 335.66 mm (V)
20.7 Inches (H) x 11.7 Inches (V)
23.5 Inches (H) x 13.2 Inches (V)
0.2058 mm (H) x 0.2058 mm (V)
0.2331 mm (H) x 0.2331 mm (V)
0.008102 Inches (H) x 0.008102
Inches (V)
0.009177 Inches (H) x 0.009177
Inches (V)
Pixel Pitch
Maximum Pixel Clock
250 MHz
Power Supply
AC 100 - 240 V – (+/- 10 %), 50/60 Hz ± 3 Hz
Signal connectors
――Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data
exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes
place automatically. However, you can customize the installation settings if desired.
――Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be
brighter or darker on the LCD panel. This does not affect product performance.
――The above specifications are subject to change without notice to improve quality.
――This device is a Class B digital apparatus.
――For detailed device specifications, visit the Samsung Electronics website.
Refer to the label at the back of the product as the standard voltage can
vary in different countries.
(USA only)
HDMI, DP, USB Type-C
To find the nearest recycling location, go to our website:
Environmental conditions Operating
Dispose unwanted electronics through an approved recycler.
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
Temperature: 50 °F – 104 °F (10 °C – 40 °C)
Humidity: 10 % – 80 %, non-condensing
Storage
Temperature: -4 °F – 113 °F (-20 °C – 45 °C)
Humidity: 5 % – 95 %, non-condensing
53
Standard Signal Mode Table
Model Name
Synchronization
Resolution
S24H850QF*/S27H850QF*
Horizontal Frequency
30 – 89 kHz
Vertical Frequency
50 – 75 Hz
Optimum Resolution
2560 x 1440 @ 60 Hz
Maximum Resolution
2560 x 1440 @ 60 Hz
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual.
Resolution
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
VESA, 640 x 480
31.469
59.940
25.175
-/-
MAC, 640 x 480
35.000
66.667
30.240
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
MAC, 832 x 624
49.726
74.551
57.284
-/-
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
54
Resolution
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
Pixel Clock (MHz)
Sync Polarity (H/V)
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 x 900RB
60.000
60.000
108.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
VESA, 2560 x 1440
88.787
59.951
241.500
+/-
――Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in
kHz.
――Vertical Frequency
Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality.
To avoid this, it is recommended that you select the optimum resolution specified for your product.
――Some resolutions listed in the table above may not be available depending on graphics card specifications.
55
Chapter 11
Appendix
Responsibility for the Pay Service (Cost to
Customers)
A Product damage caused by customer's fault
――When the service is requested, in spite of in warranty, we may charge you for a visit from a service
•• External impact or drop.
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•• If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•• Use of supplies or separatly sold product unspecified by Samsung.
•• Repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
•• Remodeling or repairing the product by customer.
•• Using it with incorrect voltage or non-authorised electrical connections.
•• Not following the "cautions" in User Manual.
•• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.)
•• If a product is reinstalled or devices are connected additionally after installing the purchased
product for the first time.
•• If a product is reinstalled to move to a different spot or to move to a different house.
•• If customer requests instructions on how to use because of another company's product.
•• If customer requests instructions on how to use the network or another company's Program.
•• If customer requests software installation and setup for the product.
Others
•• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator,
Lamp, Filter, Ribbon, etc.)
――If customer requests a service in case the product has no defect, service fee may be charged. So please
read User Manual first.
•• If a service technician removes/cleans dusts or foreign materials inside of the product.
•• If customer requests an installation additionally after purchasing a product through homeshopping or online.
56
Extended warranty
You can buy an extended warranty within 90 days of purchasing the product.
The extended warranty will cover an additional period of 3 years, beyond the standard 3 year warranty.
Samsung guarantee that replacement parts will be available for 5 years after the end of production.
After 5 years, in the event that the Samsung’s service center has run out of replacement parts and
cannot repair the product, Samsung will replace your product at no additional charge. If the model you
purchased is no longer available, Samsung replace it with the current equivalent model.
57
Download PDF

advertising