Samsung | DVD-V6600 | Samsung DVD-V6600 Benutzerhandbuch

XEB
cover
08/05/2006
14:03
Page 1
User’s Manual
Benutzerhanbuch
Manuel d’utilisation
Manuale dell’utente
Gebruiksaanwijzing
DVD-V5600
DVD-V6600
www.samsung.com/uk
www.samsung.de
www.samsung.fr
www.samsung.com/it
www.samsung.com/nl
English
Deutsch
Français
Italiano
Nederlands
PAL
XEB ENG 1
27/03/2006
17:20
Page 2
Safety Instructions
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
DO NOT expose the DVD-VCR to
extreme temperature conditions
(below 5°C and above 40°C) or to
extreme humidity conditions (less
than 10% and more than 75%).
DO NOT expose the DVD-VCR to
direct sunlight.
DO NOT expose the DVD-VCR
to any liquids.
DO NOT place any objects on the
DVD-VCR or remote control.
During a storm and/or lightning,
unplug the DVD-VCR from the
mains jack and aerial.
If the remote control is not used
for a long period of time, remove
the batteries and store it in a
cool, dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembling is prohibited.
2 - English
XEB ENG 1
27/03/2006
17:20
Page 3
Disc Type and Characteristics
This DVD-VCR is capable of playing the following types of discs with the corresponding logos :
Disc Types (Logos) Recording Types Disc Size
DVD
VIDEO-CD
Max. Playing Time
Characteristics
Audio
+
Video
12 Cm
Single-sided 240 min.
Double-sided 480 min.
• DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
8 Cm
Single-sided 80 min.
Double-sided 160 min.
• Various screen and audio functions
can be easily selected through the
on-screen menu.
Audio
+
Video
12 Cm
74 min.
AUDIO-CD
• Video with CD sound, VHS quality &
MPEG-1 compression technology.
8 Cm
20 min.
12 Cm
74 min.
8 Cm
20 min.
Audio
• CD is recorded as a Digital Signal
with better audio quality, less distortion and less deterioration of audio
quality over time.
- DO NOT play CD-ROM, CD-I and DVD-ROM in this player! (CDGs play audio only, not graphics).
- It may not play CD-R,CD-RW and DVD-R, -RW, DVD+R, +RW in all cases due to the type of disc
or condition of the recording.
- The recorded disc may not run as playback depends on the recording speed.
- Do not run the player with two discs loaded at the same time.
Disc Markings
~
PAL
NTSC
Play Region Number
PAL colour system in Europe, Australia,
New Zealand, etc.
Both the DVD-VCR and the discs are coded by
region. These regional codes must match in
order for the disc to play. If the codes do not
match, the disc will not be played.
NTSC broadcast system in U.S.A,
Canada, Korea, Japan, etc.
The Region Number for this player is
described on the rear panel of the player.
Play Region Number.
Dolby Digital disc.
STEREO
Stereo disc.
DIGITAL
SOUND
Digital Audio disc.
DTS disc.
Disc contains a Divx software product.
English - 3
XEB ENG 1
27/03/2006
17:20
Page 4
Contents
Getting Started
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Disc Type and Characteristics . . . . . . . . . . . . . . . . . . . . . .3
Overviews . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Front View of the DVD-VCR (DVD-V5600) . . . . . . . . . . .5
Front View of the DVD-VCR (DVD-V6600) . . . . . . . . . . .5
Rear View of the DVD-VCR (DVD-V5600/DVD-V6600) . .6
Display Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Inserting Batteries in the Remote Control . . . . . . . . . . . . . .7
Tour of the Remote Control . . . . . . . . . . . . . . . . . . . . . . .7
Connections
Connecting DVD-VCR to the TV using the RF Cable . . . .
Connecting DVD-VCR to the TV using the
SCART Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting DVD-VCR to a Satellite Receiver or
Other Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting DVD-VCR to the TV using the
Audio/Video Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting DVD-VCR to the TV using the
S-Video Cable (DVD Only) . . . . . . . . . . . . . . . . . . . . . . .
Connecting DVD-VCR to the TV using the
Component Video Cable (DVD Only) . . . . . . . . . . . . . . .
AV Receiver Connections . . . . . . . . . . . . . . . . . . . . . . . .
Connecting an Audio/Video Input Cable . . . . . . . . . . . . .
Plug & Auto Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Recording a Programme Immediately . . . . . . . . . . . . . . . .23
Recording a Programme with Automatic Stop . . . . . . . . . .24
Recording from Another VCR or Camcorder . . . . . . . . . . . . .24
Using the Assemble Edit Function . . . . . . . . . . . . . . . . . .25
Using the Timer Programming Feature . . . . . . . . . . . . . . .25
Checking a Preset Recording . . . . . . . . . . . . . . . . . . . . . .27
Cancelling a Preset Recording . . . . . . . . . . . . . . . . . . . . .27
Playing Back
Playing a Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Adjusting Picture Alignment Manually . . . . . . . . . . . . . . . .28
Selecting the Audio Output Mode . . . . . . . . . . . . . . . . . . .28
Playing a Cassette in Slow Motion . . . . . . . . . . . . . . . . . .28
Playing a Sequence Frame by Frame . . . . . . . . . . . . . . . .29
Playing a Sequence at Variable Speeds . . . . . . . . . . . . . .29
Searching for a Specific Sequence . . . . . . . . . . . . . . . . . .29
Using the Tape Counter . . . . . . . . . . . . . . . . . . . . . . . . . .31
DVD Functions
9
Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . .15
Setting the Clock Automatically . . . . . . . . . . . . . . . . . . .15
Setting the Menu Language . . . . . . . . . . . . . . . . . . . . . . .15
Presetting the Stations Automatically . . . . . . . . . . . . . . . .16
Presetting the Stations Manually . . . . . . . . . . . . . . . . . . . .17
Clearing a Preset Station . . . . . . . . . . . . . . . . . . . . . . . . .18
Changing the Preset Station Table . . . . . . . . . . . . . . . . . .18
Setting Up the Language Features . . . . . . . . . . . . . . . . . .32
Setting Up the Audio Options . . . . . . . . . . . . . . . . . . . . . .33
Setting Up the Display Options . . . . . . . . . . . . . . . . . . . . .34
Setting Up the Parental Control . . . . . . . . . . . . . . . . . . . . .35
DivX(R) Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Special Playback Features . . . . . . . . . . . . . . . . . . . . . . . .38
Using the Display Function . . . . . . . . . . . . . . . . . . . . . . . .39
Adjusting the Aspect Ratio (EZ View) . . . . . . . . . . . . . . . .40
Selecting the Subtitle Language . . . . . . . . . . . . . . . . . . . .41
Selecting the Audio Language . . . . . . . . . . . . . . . . . . . . . .42
Changing the Camera Angle . . . . . . . . . . . . . . . . . . . . . . .42
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Repeat Chapter/Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
A to B Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
MP3/WMA Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Program & Random Play (CD/MP3/WMA) . . . . . . . . . . . . . . .46
Picture CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
DivX/MPEG4 Playback . . . . . . . . . . . . . . . . . . . . . . . . . .48
DivX/MPEG4 Special Playback Features . . . . . . . . . . . . .49
VCR Functions
Reference
Selecting the Colour Mode . . . . . . . . . . . . . . . . . . . . . . . .20
NICAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Intelligent Picture Control . . . . . . . . . . . . . . . . . . . . . . . . .21
Auto Power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Screen Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Selecting the Cassette Type . . . . . . . . . . . . . . . . . . . . . . .22
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Selecting the Recording Speed . . . . . . . . . . . . . . . . . . . .23
Protecting a Recorded Cassette . . . . . . . . . . . . . . . . . . . .23
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .50
Troubleshooting Guide (VCR) . . . . . . . . . . . . . . . . . . . . . .51
Troubleshooting Guide (DVD) . . . . . . . . . . . . . . . . . . . . . .52
10
10
11
11
12
13
13
Settings
4 - English
XEB ENG 1
27/03/2006
17:20
Page 5
Overviews
Front View of the DVD-VCR (DVD-V5600)
1
5
6
2
7
3
8
4
9
10
11 12 13 14 15 16 17
Front View of the DVD-VCR (DVD-V6600)
1
5
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
6
7
2
8
DVD DECK.
OPEN/CLOSE BUTTON.
VIDEO CASSETE COMPARTMENT.
EJECT BUTTON.
STANDBY/ON BUTTON.
AUX VIDEO INPUT JACK.
AUX AUDIO L/R INPUT JACK.
PROGRESSIVE SCAN MODE BUTTON.
FRONT PANEL DISPLAY.
PROGRAMME SELECTION BUTTON.
DVD/VCR SELECTION BUTTON.
3
9
10
12.
13.
14.
15.
16.
17.
4
11 12 13 14 15 16
17
EZ VIEW BUTTON.
RECORD BUTTON.
REWIND/SKIP BACK BUTTON.
STOP BUTTON.
PLAY/STILL BUTTON.
FAST FORWARD/SKIP NEXT BUTTON.
English - 5
XEB ENG 1
27/03/2006
17:20
Page 6
Rear View of the DVD-VCR (DVD-V5600/DVD-V6600)
1
5
1. AUDIO L, R OUT JACKS.
2. AERIAL IN CONNECTOR.
3. AV2 (DEC./EXT.) IN/OUT SCART
(EURO-21) JACK.
4. AUDIO L, R OUT JACKS (DVD only).
5. VIDEO OUT JACK.
2
3
4
5
6
1. The DVD Deck is active.
2. Disc is loaded.
3. The time, counter position, current deck
status is displayed.
4. VHS tape is inserted.
5. The VCR Deck is active.
6. A Timer Recording is programmed or in
progress.
6 - English
3
4
6
7
8
9
10
6. OUT TO TV CONNECTOR.
7. AV1 (EURO AV) IN/OUT SCART.
(EURO-21) JACK.
8. DIGITAL AUDIO OUT JACKS (COAXIAL).
9. COMPONENT VIDEO OUT JACKS.
10. S-VIDEO OUT JACK.
Display Indicators
1
2
XEB ENG 1
27/03/2006
17:20
Page 7
Accessories
Tour of the Remote Control
Make sure that the following basic accessories
are supplied with your DVD-VCR.
1
Owner’s
Instructions
Batteries for
remote controls
RF-Cable
2
16
17
18
19
3
20
Audio & Video
Cable
Remote Control
Inserting Batteries in the Remote
Control
You must insert or replace the batteries in the
remote control when you:
• Purchase the DVD-VCR
• Find that the remote control is no longer
working correctly
1 To release the battery compartment cover,
push the tab in the direction of the arrow and
lift up.
4
5
21
22
6
7
23
8
24
9
25
10
26
11
12
27
13
28
14
29
15
30
2 Insert two AAA, RO3 or equivalent batteries,
taking care to respect the polarities:
• + on the battery with + on the remote
control.
• – on the battery with – on the remote
control.
Do not mix different battery types (manganese
and alkaline for example).
3 Replace the cover by aligning it with the base
of the remote control and push it down.
English - 7
XEB ENG 1
27/03/2006
17:20
Page 8
1. DVD,VCR
Used to operate DVD, VCR.
23. PLAY/PAUSE (
)
Used to play or pause during playback.
2. STANDBY/ON
Used to turn the power on or off.
24. SEARCH (
/
)
Used to search forward or backward through
a disc.
3. Number buttons
4. TIMER
Used to activate the timer recording of
a programme.
5. REC ( ● )
Used to make a recording on cassette.
6. SKIP (
/
)
Use to skip a title, chapter or track.
7. STOP ( ■ )
Used to stop during playback.
8. AUDIO
Used to access various audio functions.
9. TRK ( ›/ ‚)
Used to adjust picture alignment manually to
obtain the best possible picture during playback.
10. MENU
Used to display the on-screen menu.
11. OK ›/ ‚,¥ / Š
Used to control the cursor in the on-screen
menu and confirm your choice.
12. EZ VIEW
Used to adjust the aspect ratio on a disc.
13. DISC MENU
Used to display a disc menu.
14. SUBTITLE
Used to change the DVD’s subtitle language.
15. ANGLE
Used to access various camera angles on a
DVD.
IPC (Intelligent Picture Control).
Used to adjust the sharpness of the picture.
16. INPUT SEL.
Used to select a external input signal.
17. TV/VCR
Used to select TV or VCR.
18. INFO.
Used to display the current setting or disc
status.
19. OPEN/CLOSE
Used to open and close the disc and video
cassette tray.
20. SHUTTLE
Used to play a sequence at variable speeds.
21. F.ADV/STEP
Used to advance a sequence frame by
frame.
22. SPEED
Used to select the recording speed.
8 - English
25. PROG
Used to select a TV programme.
26. RETURN
Used to return to a previous menu.
27. ZOOM
Used to enlarges picture .
28. CLEAR
Used to
Used to
Used to
Used to
Used to
play.
clear a preset TV station.
cancel a preset recording.
cancel a preset mark.
set the tape counter to zero.
resume normal play during repeat
29. MARK
Used to mark a position during playback a
disc.
SEARCH
Used to search for a specific sequence.
30. MODE
Used to select the programme or random
play.
REPEAT
Used to allow the repeat play a title, chapter,
track, disc or A-B.
XEB ENG 2
27/03/2006
17:20
Page 9
Connecting DVD-VCR to the TV
using the SCART Cable
C onnections
Connecting DVD-VCR to the TV
using the RF Cable
To receive television programmes a signal must
be received from one of the following sources:
• An outdoor aerial.
• An indoor aerial.
• A cable television network.
• A satellite receiver.
Note
• Make sure that both the television and the
DVD-VCR are switched off before connecting the cables.
1 Remove the aerial or network input cable
from the television.
You can connect your DVD-VCR to the television using the SCART cable if the appropriate
input is available on the television. You thus:
• Obtain better quality sound and pictures.
• Simplify the setting up procedure of your
DVD-VCR.
Note
• Regardless of the type of connection chosen,
you must always connect the RF Cable supplied.
Otherwise, no picture will be visible on the
screen when the DVD-VCR is switched off.
• Make sure that both the television and the DVDVCR are switched off before connecting the
cables.
1 Connect the Aerial Cable.
2 Connect one end of the SCART cable to the
2 Connect this cable to the 75Ω coaxial jack
marked
on the rear of your DVD-VCR.
3 Plug the RF Cable supplied into
TV
the jack
AV1 (EURO AV) jack on the rear of the DVDVCR.
3 Plug the other end into the appropriate
connector on the television.
on your DVD-VCR.
4 Plug the other end of the RF Cable into the
connector previously used for the aerial on
the television.
Aerial
Connecting the Audio Output
Cable
You can connect your DVD-VCR to a Hi-Fi
system. Example: You wish to take advantage of
the quality of your Hi-Fi stereo system when
watching a disc play.
4 Plug the audio output cable into the audio
connectors on the rear of your DVD-VCR.
2
TV
3
5 Plug the other end of the audio cable into the
appropriate input connectors on your Hi-Fi
stereo system.
4
4
Aerial
RF cable
1
2
TV
5
3
RF cable
English - 9
XEB ENG 2
27/03/2006
17:20
Page 10
Connecting DVD-VCR to a Satellite
Receiver or Other Equipment
Connecting DVD-VCR to the TV
using the Audio/Video Cable
You can connect your DVD-VCR to a Satellite
receiver or other DVD-VCR using the SCART
cable if the appropriate outputs are available on
the equipment chosen. The following illustrations give a few examples of the connection
possibilities.
You can connect your DVD-VCR to the television using the audio/video cable if the appropriate input is available on the television.
1 AV2(EURO AV): By means of 21-pin Scart
Cable
Plug the SCART Cable with satellite receiver
or other equipment into the AV2 (EURO AV)
jack on the rear of the DVD-VCR.
After making this connection, select the
source by pressing the INPUT SEL. button
for the AV2 input sources.
2 By means of RF Cable
After making this connection, you must preset
the station received through the satellite
tuner.
1 Connect one end of the video cable into the
VIDEO output jack on the rear of the DVDVCR.
2 Plug the other end of the video cable into the
appropriate input connector on the television.
3 Connect one end of the audio cables supplied
into the AUDIO output jacks on the rear of the
DVD-VCR.
• Take care to respect the colour coding of
the left and right channels.
4 Plug the other end of the audio cables into
the appropriate input connectors on the television.
3 AV1 (EURO AV) : By means of 21-pin Scart
Cable
Connect the end of the SCART cable to the
AV1(EURO AV) jack on the rear of the DVDVCR. Plug the other end into the appropriate
connector on the television.
3
Aerial
Satellite Receiver or other Equipment
1
Aerial Connector
2
4
1
TV
2
3
SCART cable
RF cable
10 - English
XEB ENG 2
27/03/2006
17:20
Page 11
Connecting DVD-VCR to the TV
using the S-Video Cable (DVD only)
You will enjoy high quality images. S-Video
seperates the picture element into black and
white(Y) and colour(C) signals to present clearer
images than regular video input mode.
1 Connect one end of the S-Video cable into
the S-VIDEO output jack on the rear of the
DVD-VCR.
2 Plug the other end of the S-Video cable into
the appropriate input connector on the television.
3 Connect one end of the audio cables supplied
into the AUDIO LINE output jacks on the rear
of the DVD-VCR.
• Take care to respect the colour coding of
the left and right channels.
4 Plug the other end of the audio cables into
Connecting DVD-VCR to the TV
using the Component Video Cable
(DVD only)
Your TV must support progressive scan input to
allow you to watch component video output.
You will enjoy high quality accurate colour reproduction images. Component video seperates the
picture element into black and white (Y), blue
(Pb), red (Pr) signals to present most clear and
clean images.
1 Connect Component video cables between
the COMPONENT VIDEO OUT jacks on the
rear of the DVD-VCR and COMPONENT
VIDEO IN jacks on the rear of the TV.
2 Connect audio cables between the AUDIO
LINE OUT jacks on the rear of the DVD-VCR
and AUDIO IN jacks on the rear of the TV.
• Take care to respect the colour coding of
the left and right channels.
the appropriate input connectors on the television.
Note
• Use the S-Video connection method only for
the DVD.
COMPONENT VIDEO OUT
1
3
2
COMPONENT INPUT
1
4
COMPONENT VIDEO IN
2
English - 11
XEB ENG 2
27/03/2006
17:20
Page 12
Progressive Scan (DVD only)
If the TV connected supports Progressive Scan,
press the P.SCAN button on the front panel in
stop mode.
• The message “Press OK to confirm
Progressive scan mode. Otherwise press
RETURN.” will be displayed. If you want
Progressive scan mode, select OK. Make sure
that the disc has stopped completely before
changing the mode.
AV Receiver Connections
To take full advantage of the movie theater
experience that DVD offers, you may want to
connect your DVD-VCR to a complete Surround
Sound system, including an A/V Receiver and
six Surround Sound speakers. If your A/V
receiver is equipped with a Dolby Digital
Decoder, you have the option to bypass the
DVD-VCR’s built-in Dolby Digital Decoder. Use
the Digital Audio Out connection below.
1 Connect a Digital Audio coaxial cable from the
Digital Audio Out jacks on the panel of the DVDVCR to their corresponding Digital Audio Input
jacks on your A/V Receiver:
• To cancel the progressive scan mode, press
the P.SCAN button in stop mode.
Note
• Do not press the P.SCAN button if you are
using a TV that does not support Progressive
mode. Nothing will be displayed on the screen
if pressed. To release the Progressive mode,
press the P.SCAN button in stop mode.
• See your TV User’s Manual to find out if your
TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s
instructions regarding Progressive Scan settings in the TV’s menu system.
• Depending on your TV, the method of connection may differ from the illustration above.
• What is "Progressive Scan"? Progressive scan
has twice as many scanning lines as the interlace output method has. Progressive scanning
method can provide better and clearer picture
quality.
• You must connect the player to the component(s) before using the Progressive Scan feature.
• Make sure that the colour coded connections
match. That is, the Y, Pb and Pr component
output jacks of your DVD -VCR should be connected to the exact corresponding component
input jacks on your TV. Otherwise, red or blue
images will be displayed on the TV screen.
• NTSC DVD disc is not supported.
12 - English
Digital Audio out Jack
To Digital Audio Input of an A/V Receiver
with a Dolby, MPEG2, DTS, Digital Decoder
XEB ENG 2
27/03/2006
17:20
Page 13
Connecting an Audio/Video Input
Cable
You can connect other audio/video equipment to
your DVD-VCR using audio/video cables if the
appropriate outputs are available on the equipment chosen.
Examples :
• You wish to copy a video cassette with the
help of a second VCR.
• You wish to play and/or copy pictures taken
with a camcorder.
• Make sure that both the external devices and
the DVD-VCR are switched off before connecting the cables.
Plug & Auto Setup
Your DVD-VCR will automatically set itself up
when it is plugged into the mains for the first
time. TV stations will be stored in memory. The
process takes a few minutes. Your DVD-VCR
will then be ready for use.
1 Connect the RF Cable as indicated on page
9. (Connecting Your DVD-VCR to the TV
using the RF Cable).
2 Plug the DVD-VCR into the mains.
• “AUTO” in the front panel display flickers.
1 Connect one end of the video cable into the
VIDEO input jack on the front of the DVDVCR.
3 The Language Set menu is displayed.
2 Plug the other end of the video cable into the
appropriate output connector on the other
system (VCR or Camcorder, etc).
3 Connect one end of the audio cable supplied
into the AUDIO input jacks on the front of the
DVD-VCR.
• Take care to respect the colour coding of
the left and right channels.
4 Plug the other end of the audio cable into the
appropriate output connectors on the other
system (VCR, camcorder, etc).
Language Set
Š English
Français
Deutsch
Español
Italiano
Nederlands
OK
RETURN
MENU
4 Press the › or ‚ button to select the desired
language, then press OK button.
Start the auto setup.
Auto Setup will be
started.
Check antenna and TV
cable connection.
OK
RETURN
MENU
1
3
4
2
English - 13
XEB ENG 2
27/03/2006
17:20
Page 14
5 Press the ›/‚/¥ /Š buttons to select your
Country.
The Country Selection menu is displayed.
7 The current time and date are displayed
automatically.
Clock Set
Country Selection
SETUP
A
NL
S
PL
DVD
Time
Date
Year
B
I
CH
CZ
VCR
12 : 00
01 / JAN
/ 2006 SUN
Auto Clock
: On
DK
N
TR
FIN
P
GR
D
E
Others
PROG
FUNC
OK
HU
RETURN
OK
MENU
• Refer to following abbreviation table when
selecting “Country”.
• The DVD-VCR searches for the station
according to a preset preference list
corresponding to the country that you have
selected.
6 Press the OK button.
A(Austria)
NL(Netherlands) S(Sweden)
B(Belgium)
I(Italy)
CH(Swiss)
CZ(Czech)
DK(Denmark)
N(Norway)
TR(Turkey)
Others
FIN(Finland)
P(Portugal)
D(Deuthland) E(Spain)
PL(Poland)
GR(Greece)
HU(Hungary)
Start the auto scanning.
The number of stations automatically stored
by the DVD-VCR depends on the number of
stations that it has found.
Auto Setup
Please Wait
10%
ŠŠ
RETURN
14 - English
MENU
RETURN
MENU
Check the Date and Time if it is :
• Incorrect, refer to “Setting the Date and
Time”. (See page 15)
• Correct, press the RETURN button twice to
exit the menu.
Note
• Now, you only have to switch the DVD-VCR
on and it is ready for use.
• Function for “Plug & Auto Set Up” is fixed already.
So if you want to change this fixed one, you can
change. (refer to “Presetting the Stations Manually”
page 17).
XEB ENG 3 copy 1
27/03/2006
17:25
Page 15
Setting the Clock Automatically
S ettings
4 Press the ¥ or Š button to select Auto
Setting the Date and Time
Your DVD-VCR contains a 24-hour clock and
calendar used to:
• Automatically stop programme recording.
• Preset your DVD-VCR to record a programme
automatically.
You must set the date and time when:
• You purchase the DVD-VCR.
• Do not forget to reset the time when you
change clocks from winter to summer time
and vice versa.
Clock. Press the › or ‚ button to select On.
Clock Set
SETUP
DVD
VCR
Time
Date
Year
12 : 00
01 / JAN
/ 2006 SUN
Auto Clock
: On
PROG
FUNC
OK
RETURN
MENU
Setting the Menu Language
1 Press the MENU button, then press the OK or
Š button.
1 Press the MENU button, then press the OK or
Setup
SETUP
DVD
VCR
PROG
Language
: English
Š button.
Š
Clock
Š
Install
Š
User Set
Š
Auto Power Off
: Off
Š
Screen Messages
: On
Š
FUNC
Setup
SETUP
DVD
VCR
PROG
RETURN
OK
MENU
Language
: English
Š
Clock
Š
Install
Š
Š
User Set
Auto Power Off
: Off
Š
Screen Messages
: On
Š
FUNC
2 Press the › or ‚ button to select Clock,
then press the OK or Š button.
The Clock Set menu is displayed.
3 Press the ¥ or Š button to select the hour,
minutes, day, month, and year. The selected
option is highlighted. Press the › or ‚ button
to set them. The day of the week is displayed
automatically. Press the OK button.
OK
RETURN
MENU
2 Press the OK or Š button again.
The Language Set menu is displayed.
Language Set
Š English
Français
Deutsch
Español
Italiano
Clock Set
Nederlands
SETUP
OK
DVD
VCR
Time
Date
Year
12 : 00
01 / JAN
/ 2006 SUN
Auto Clock
RETURN
MENU
3 Press the › or ‚ button to select desired
: On
PROG
language, then press the OK or Š button.
• Press the MENU button to exit the menu.
FUNC
OK
RETURN
MENU
• You can hold down the › or ‚button to
scroll more quickly through the values.
• Press the MENU button to exit the menu.
English - 15
XEB ENG 3 copy 1
27/03/2006
17:25
Page 16
4 Press the OK button. A message is displayed,
Presetting the Stations
Automatically
You do not need to preset the stations if you
have already set them automatically (refer to
“Plug & Auto Set Up” on page 13).
Your DVD-VCR contains a built-in tuner used to
receive television broadcasts.
You must preset the stations received through
the tuner. This can be done:
• Plug & Auto Set up (refer to page 13).
• Automatically.
• Manually (refer to page 17).
You can store up to 80 stations.
indicating that any channels already preset on
your DVD-VCR will be deleted.
Auto Setup
Your data will be lost
Press OK to continue
MENU to exit
OK
RETURN
MENU
5 Press the OK button to start the auto scanning. The message Please Wait is displayed.
1 Press the MENU button, then press the
Auto Setup
OK or Š button.
Setup
SETUP
DVD
VCR
PROG
Language
Š
: English
Clock
Š
Install
Š
User Set
Š
Auto Power Off
: Off
Š
Screen Messages
: On
Š
Please Wait
10%
ŠŠ
RETURN
MENU
FUNC
RETURN
OK
MENU
2 Press the › or ‚ button to select Install,
then press the OK or Š button.
The Install menu is displayed.
Install
SETUP
DVD
Auto Setup
Š
Manual Setup
Š
• The first frequency band is scanned and
stored, then the DVD-VCR searches for the
second station and so on.
When the automatic scanning procedure
has finished, the DVD-VCR switches
automatically to programme 1.
• If you wish to cancel the auto scanning
before the end, press the MENU button.
Note
VCR
• The number of stations automatically stored by the
DVD-VCR depends on the number of stations that
it has found.
PROG
FUNC
RETURN
OK
MENU
3 Press the OK or Š button. The Country
Selection menu is displayed. Press the ›/‚,
¥/Š buttons to select your country.
Country Selection
A
NL
S
PL
B
I
CH
CZ
Other
DK
N
TR
FIN
P
GR
D
E
HU
OK
RETURN
MENU
• Refer to abbreviation table (see page 14)
16 - English
• The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automatically. In this case, they should be set manually
(refer to page 15).
• Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required (refer to
page 18).
XEB ENG 3 copy 1
27/03/2006
17:25
Page 17
Presetting the Stations Manually
You do not need to preset the stations manually
if you have already set them automatically.
1 Press the MENU button, then press the OK or
Š button.
❉ ❉
MANUAL TUNING. ❉ ❉
PR
:
PR
:
1
CH
:
021
1
MFT
:
-
DECODER
:
OFF
NAME
:
----
›‚¥
¥Š
Š
MEMORY : OK
RETURN
Setup
SETUP
DVD
VCR
PROG
Language
Š
: English
Clock
Š
Install
Š
User Set
Š
Auto Power Off
: Off
Š
Screen Messages
: On
Š
RETURN
select MFT, then press the ¥ or Š button to
adjust the picture.
7 Press the › or ‚ button to select
FUNC
OK
6 If necessary, press the › or ‚ button to
MENU
DECODER.
Then press the ¥ or Š button to select
decoder ON or OFF .
2 Press the › or ‚ button to select Install,
then press the OK or Š button.
The Install menu is displayed.
❉ ❉
Install
SETUP
DVD
Auto Setup
Š
Manual Setup
Š
VCR
MANUAL TUNING. ❉ ❉
SYSTEM
:
L/L’
PR
:
1
CH
:
021
MFT
:
-
DECODER
:
OFF
NAME
:
----
›‚¥
¥Š
Š
PROG
MEMORY : OK
RETURN
FUNC
OK
RETURN
MENU
8 Press the › or ‚ button to select NAME.
The station name is set automatically from the
broadcast signal.
• To change the programme’s name, press
the Š button. The first letter of the name
flashes.
3 Press the › or ‚ button to select Manual
Setup, then press the OK or Š button.
The TV STATION TABLE menu is displayed.
4 Press the › or ‚ button to select the
To...
required programme number.
❉ ❉
TV STATION TABLE ❉ ❉
PR
CH
NAME
DEC
1
021
----
OFF
Then...
Select a character Press the › or ‚button until the
in the name.
required character is displayed
(letters, numbers or “-” character).
SYSTEM
Move to the next
previous or
character
L/L’
2
3
Press the ¥ or Š button
respectively.
4
5
›‚Š
Š
DELETE : CLEAR
SWAPPING : OK
RETURN
5 Press the Š button to preset the station.
The MANUAL TUNING menu will be displayed.
Press the ¥ or Š button to start scanning the
channels. The frequency band is scanned and
the first station found is displayed.
9
If you...
Then...
Wish to store the • Press OK to store the
station displayed
station.
Do not wish to
store the station
displayed
• Press the › or ‚button until
the CH is selected.
• Press the ¥ or Š button to
go on scanning the
frequency band and display
the next station.
English - 17
XEB ENG 3 copy 1
27/03/2006
17:25
Page 18
10 Repeat this procedure from step 4 onwards,
until all the required stations have been
stored.
11 Press the MENU button to exit the menu.
Changing the Preset Station Table
You can rearrange the station table and give
different programme numbers to the stations
listed according to your own preferences.
1 Press the MENU button, then press the OK or
Clearing a Preset Station
If you have stored a TV station:
• That you do not require
• At the wrong programme position, you can
cancel it.
1 Press the MENU button, then press the OK or
Š button.
Š button.
Setup
SETUP
Language
DVD
VCR
Š
: English
Clock
Š
Install
Š
Š
User Set
PROG
Auto Power Off
: Off
Š
Screen Messages
: On
Š
FUNC
RETURN
OK
MENU
Setup
SETUP
Language
DVD
VCR
PROG
: English
Š
Clock
Š
Install
Š
User Set
Š
Auto Power Off
: Off
Š
Screen Messages
: On
Š
FUNC
OK
RETURN
MENU
2 Press the › or ‚ button to select Install,
then press the OK or Š button. The Install
menu is displayed.
Install
SETUP
DVD
Auto Setup
Š
Manual Setup
Š
VCR
2 Press the › or ‚ button to select Install,
then press the OK or Š button.
The Install menu is displayed.
3 Press the › or ‚button to select Manual
Setup, then press the OK or Š button.
The TV STATION TABLE menu is displayed.
❉ ❉
TV STATION TABLE ❉ ❉
PR
CH
NAME
DEC
1
021
----
OFF
SYSTEM
L/L’
2
3
4
5
›‚Š
Š
DELETE : CLEAR
SWAPPING : OK
RETURN
4 Press the › or ‚ button to select required
preset TV station.
Press the CLEAR button to delete.
PROG
FUNC
OK
RETURN
MENU
3 Press the › or ‚button to Select Manual
Setup, then press the OK or Š button.
The TV STATION TABLE menu is displayed.
4 Press the › or ‚ button to select required
preset TV station. The selected station is displayed at the same time on the television
screen.
5 Press the OK button to change the
programme number assigned to a station.
❉ ❉
TV STATION TABLE ❉ ❉
PR
CH
NAME
DEC
SYSTEM
1
021
----
OFF
L/L’
2
5 Repeat the same procedure from step 4
onwards until all the required stations have
been cleared.
18 - English
3
4
5
›‚Š
Š
DELETE : CLEAR
SWAPPING : OK
RETURN
XEB ENG 3 copy 1
27/03/2006
17:25
Page 19
6 Press the › or ‚ button to select required
position, then press the OK button to swap
the position.
For example to move a TV station in
programme 1 to programme 3.
❉ ❉
PR
TV STATION TABLE ❉ ❉
CH
NAME
DEC
021
----
OFF
SYSTEM
1
2
3
L/L’
4
5
›‚Š
Š
DELETE : CLEAR
SWAPPING : OK
RETURN
• Press the MENU button to exit the menu.
English - 19
XEB ENG 3 copy 1
27/03/2006
17:25
Page 20
V CR F unctions
Selecting the Colour Mode
Before recording or playing back a cassette,
you can select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
• When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
• When you playback an NTSC-recorded tape
on this DVD-VCR make a setting on the colour
system according to your TV. If your TV is a
PAL system only TV, set NTPB. If your TV is
multi system TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
NICAM
NICAM programmes are divided into 3 types.
NICAM Stereo, NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can
select the desired sound. Please refer to page 28.
1 Press the MENU button, then press the OK or
Š button.
Setup
SETUP
DVD
VCR
PROG
1 Press the MENU button, then press the OK
Language
Clock
Š
Install
Š
Auto Power Off
: Off
Š
Screen Messages
: On
Š
FUNC
OK
Setup
DVD
VCR
PROG
Language
Š
: English
Clock
Š
Install
Š
User Set
Š
Auto Power Off
: Off
Š
Screen Messages
: On
Š
OK
RETURN
MENU
then press the OK or Š button.
The User Set menu is displayed.
MENU
then Press the OK or Š button.
The User Set menu is displayed.
User Set
DVD
2 Press the › or ‚ button to select User Set,
RETURN
2 Press the › or ‚ button to select User Set,
SETUP
FUNC
Š
User Set
or Š button.
SETUP
Š
: English
VCR
Colour System
: Auto
Š
NICAM
: On
Š
IPC
: On
Š
PROG
FUNC
OK
RETURN
MENU
User Set
SETUP
DVD
VCR
Colour System
: Auto
Š
NICAM
: On
Š
IPC
: On
Š
PROG
FUNC
OK
RETURN
MENU
3 Press the OK or Šbutton to select required
colour system.
Auto ➝ PAL ➝ SECAM ➝ MESECAM ➝ B/W
• Auto: When playing back a cassette,
the system standard is automatically
selected by the DVD-VCR.
• B/W: Black and White.
20 - English
3 Press the › or ‚ button to select NICAM, then
press the OK or Š button to select On or Off.
• On (for NICAM mode):
Normally set at this position
• Off (for MONO mode):
Only set at this position to record the standard
mono sound during a NICAM broadcast if
the
stereo sound is distorted due to inferior
reception conditions.
XEB ENG 3 copy 1
27/03/2006
17:25
Page 21
Intelligent Picture Control
Auto Power Off
This feature allows you to adjust the sharpness
of the image automatically, according to your
own preferences.
This feature automatically turns off your DVDVCR if no signal is received and you do not
press any button for the selected time.
1 During playback, press the MENU button,
1 Press the MENU button, press the OK or Š
then press the OK or Š button.
2 Press the › or ‚ button to select User Set,
then press the OK or Š button.
The User Set menu is displayed.
button.
Setup
SETUP
DVD
VCR
3 Press the › or ‚ button to select IPC
(Intelligent Picture Control), then press the OK
or Š button.
PROG
Language
Š
: English
Clock
Š
Install
Š
Š
User Set
Auto Power Off
: Off
Š
Screen Messages
: On
Š
FUNC
OK
RETURN
MENU
User Set
SETUP
DVD
VCR
Colour System
: Auto
Š
NICAM
: On
Š
IPC
: On
Š
2 Press the › or ‚ button to select Auto
Power Off.
Setup
PROG
SETUP
FUNC
DVD
OK
RETURN
MENU
• You can select the modes simply by pressing the IPC button.
VCR
PROG
Language
‚ button to turn the IPC mode OFF.
The sharpness of the picture is adjusted
manually.
Press the ¥ or Š buttons until the picture is
displayed according to your preferences.
Š
Clock
Š
Install
Š
Š
User Set
Auto Power Off
: Off
Š
Screen Messages
: On
Š
FUNC
OK
4 To adjust the sharpness manually, press the
: English
RETURN
MENU
3 Press the OK or Š button to select the
preset interval.
➝ Off ➝ 1 Hour ➝ 2 Hour ➝ 3 Hour
• Press the MENU button to exit the menu.
❉ ❉
PICTURE ❉ ❉
IPC : OFF
SOFTEN
SHARPEN
❉
¥Š
Š
ON/OFF : ‚
English - 21
XEB ENG 3 copy 1
27/03/2006
17:25
Page 22
Screen Messages
Selecting the Cassette Type
Your DVD-VCR displays most information both
If you wish to use the tape counter to display the
the DVD-VCR and the television.
time remaining on a cassette, you must indicate
You can choose to display or hide this information the type of cassette inserted.
on the television screen (If you configure the
Screen Message to Off, the Fast Forward and
1 Press the MENU button, then press the › or
Rewind messages will not be displayed on the
‚ button to select VCR.
screen. However, the Search Message will not be
displayed on the screen regardless of the Screen 2 Press the OK or Š button.
Message configuration).
The Tape Select is highlighted.
1 Press the MENU button, then press the OK or
Š button.
VCR Setup
SETUP Tape Select
Repeat Play
: E180
Š
: Off
Š
DVD
Setup
SETUP
DVD
VCR
PROG
VCR
Language
Š
: English
Clock
Š
Install
Š
User Set
Š
Auto Power Off
: Off
Š
Screen Messages
: On
Š
FUNC
OK
RETURN
MENU
2 Press the › or ‚ button to select Screen
Messages.
PROG
FUNC
OK
RETURN
MENU
3 Press the OK or Š button to select the
correct cassette length.
➝ E180 ➝ E240 ➝ E260 ➝ E300
• Press the MENU button to exit the menu.
Setup
SETUP
DVD
VCR
PROG
Language
: English
Š
Clock
Š
Install
Š
Š
User Set
Auto Power Off
: Off
Š
Screen Messages
: On
Š
FUNC
OK
RETURN
MENU
Repeat Play
You can set repeat play to repeat the tape
continously from beginning to end.
1 Press the MENU button, then press the › or
‚ button to select VCR.
3 Press the OK or Š button to select On or Off. 2 Press the OK or Š button, then press the
• On : Select to display on-screen information.
• Off : Select to hide on-screen information.
• Press the MENU button to exit the menu.
›or‚ button to select Repeat Play.
Press the OK or Š button to select On or Off.
VCR Setup
SETUP Tape Select
Repeat Play
: E180
Š
: Off
Š
DVD
VCR
PROG
FUNC
OK
RETURN
MENU
• On: Repeat play.
• Off: Do not wish to repeat play.
22 - English
XEB ENG 4
27/03/2006
17:22
Page 23
Selecting the Recording Speed
You can record a cassette at two different
speeds:
• SP (Standard Play)
• LP (Long Play)
In Long Play modes:
• Each cassette lasts twice as long
• The recording is of a slightly lower quality
1 Press the SPEED button to select SP or LP.
• The selected record speed will appear on
the front panel display.
Recording a Programme
Immediately
Before recording a programme, you must have
preset the corresponding station (unless you are
recording via an external video source). If you
have not done so, refer to pages 16~17.
1 Switch on the television.
2 Insert the video tape in to the VCR deck, with
the window visible and the safety tab intact or
the opening covered with adhesive tape. The
DVD-VCR is switched on automatically.
3 Select the station by pressing the PROG
Type
Recording Time (in SP)
E180
180 mins. or 3 hours
E240
240 mins. or 4 hours
E260
260 mins. or 4 hours and 20 mins.
E300
300 mins. or 5 hours
( or ) button or select the source (AV1,
AV2 or AUX) by pressing the INPUT SEL.
button for a satellite tuner or external video
source. The station number is displayed and
the programme can be seen on the television.
4 Select the recording speed by pressing the
SPEED button as many times as required
5 Hold down the REC (●) button for a while to
Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent
accidental erasure. When this tab has been
removed, you cannot record on the tape.
1 If you wish to protect a cassette, break off the
tab using a small screwdriver.
2 To re-record over a protected cassette (safety
tab broken), cover the hole with adhesive
tape.
start recording.
The record indicator appears on the television
and DVD-VCR display. An index is recorded
on the tape (Refer to page 29).
6 To stop recording, press the ■ button once.
• If your DVD-VCR ejects the cassette when
you start recording, check to make sure
that the cassette’s safety tab is intact or
that the opening (Created by a broken
safety tab) is overed with adhesive tape.
• If you reach the end of the tape while
recording, the cassette rewinds
automatically.
English - 23
XEB ENG 4
27/03/2006
17:22
Page 24
Recording a Programme with
Automatic Stop
Recording from Another VCR or
Camcorder
This function enables you to record up to nine
hours (LP) of programmes.Your DVD-VCR stops
automatically after the requested length of time.
You can copy a cassette to your DVD-VCR from
another video source, such as another VCR or a
Camcorder etc.
• It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in
any form without the permission of the owners
of the corresponding copyright.
1 Switch on the television.
2 Insert the cassette on which the programme
is to be recorded, with the window visible and
the safety tab intact or the opening covered
with adhesive tape. The DVD-VCR is
switched on automatically.
3 Select the station to be recorded by pressing
the PROG( or ) button or select the
source (AV1, AV2 or AUX) by pressing the
INPUT SEL. button for a satellite tuner or
external video source. The station number is
displayed and the programme can be seen on
the television.
4 Select the recording speed by pressing the
1 Connect the output jack of your external
devices to the SCART input connector or AUX
on the front or rear of the DVD-VCR.
2 Insert a blank cassette in your DVD-VCR.
3 Insert the pre-recorded cassette in the other
video source (VCR or Camcorder etc).
4 Press the INPUT SEL. button to select the
appropriate input on your DVD-VCR:
• AV1, AV2 for the SCART input.
• AUX for the RCA input.
SPEED button as many times as required
(Refer to page 23).
5 Start playing back the cassette to be copied.
5 Hold down the REC (●) button for a while to
6 Hold down the REC (●) button for a while to
start recording. The record indicator appears
on the television screen and DVD-VCR display. An index is recorded on the tape
(Refer to page 29).
6 Press the REC (●) button several times to
increase the recording time in:
• 30-minute intervals up to four hours.
• 1-hour intervals up to nine hours.
The length is displayed on the television displays. The selected programme is recorded
for the length of time requested. At the end of
that time, the DVD-VCR stops recording automatically and power off.
LENGTH 2:30
SET LENGTH :
PRESS REC ●
7 If you wish to cancel the recording before the
end, press the STANDBY/ON button.
• If the end of the tape is reached while
recording, the recording stops and power off.
24 - English
start recording on your DVD-VCR.
7 When you have finished recording, press the
■ button on both VCR and DVD-VCR.
• If you wish to view the cassette being
copied, your DVD-VCR must be connected
as usual to the television (Refer to page 9
for further details).
XEB ENG 4
27/03/2006
17:22
Page 25
Using the Assemble Edit Function
This function allows you to start a new recording
at a specific position on the cassette while maintaining a very smooth scene change.
1 Insert the cassette to be edited in your
DVD-VCR.
2 Press the Šll button to start playback.
3 When you reach the position from which you
wish to start the new recording,
press the Šll button.
Using The Timer Programming
Feature
The Timer Programming feature allows you to
preset the DVD-VCR to record a programme up
to one month before that programme is to be
broadcast. Up to six programmes can be preset.
• Before presetting a recording, check that the
Date and Time are correct.
• You must check that the cassette tape is
loaded.
1Press the MENU button, then press the › or
‚ button to select PROG.
4 Press the F.ADV/STEP button as often as
Timer Method
necessary to advance frame by frame, until
the exact recording position is located.
SETUP
If you want to set the
DVD
timer program, press
VCR
5 While the DVD-VCR is in still mode, hold
down the REC (●) button for a while to activate the assemble edit function. The mode is
changed to pause.
6 Select the source from which you wish to
record by pressing:
• The PROG
or
button for television
channels.
• The INPUT SEL. button for the AV1,AV2
or AUX.
7 Press the Šll button to start recording.
If you want to finish the recording, press the
■ button.
the OK key.
PROG
FUNK
OK
RETURN
MENU
2 Press the OK or Š button. The timer programming menu is displayed.
3 Press the OK or Š button to select PR, then
press the ›or‚ button to select the required
station.
• Press the INPUT SEL. button to select an
input source (AV1, AV2 or AUX) other then
the tuner.
4 Press the Š button to select Day, then press
the › or ‚ button to select the required day.
PR
01
Day
SU 01
Start
Stop
:
:
:
:
:
:
:
:
:
:
:
:
OK
Speed
RETURN
V/P
MENU
English - 25
XEB ENG 4
27/03/2006
17:22
• DLY
• W-SU
• W-MO
: Daily
: Weekly Sunday
Weekly Monday
• W-SA
• SU 01
Weekly Saturday
: Sunday 01
Page 26
5 Press the Š button to select Start (Start time
9 When you have finished, press the OK button
to set the Timer Programming.
10 Press the MENU button to exit the menu.
11 Press the STANDBY/ON button to activate
the timer.
of recording).
PR
01
Day
SU 01
Start
Stop
13: : 25
:
:
:
:
:
:
:
:
:
:
:
Speed
Before starting recording, the DVD-VCR
compares the timer duration with the
remaining time on the cassette.
RETURN
OK
V/P
MENU
6 Press the Š button to select Stop (Recording
stop time).
• Press the ¥ or Š button to select the hour
or minute.
• Press the › or ‚ button to set the stop
time.
7 Press the Š button to select Speed
(Recording speed).
PR
01
Day
SU 01
Start
Stop
13: : 25
19: : 57
:
:
:
:
:
:
:
:
:
:
OK
Speed
RETURN
V/P
SP
MENU
• Press the ›or ‚ button to select the
required recording speed.
• Auto ➝ SP (Standard Play) ➝ LP (Long
Play)
• Auto Tape Speed Select
The DVD-VCR’s “Auto Tape Speed Select”
function compares the duration of the timer
recording to the actual recording time remaining on the tape loaded. If there is insufficient
tape to complete a timer recording in Auto
mode, the DVD-VCR automatically switches
to LP mode to record the whole programme.
8 Press the Š button to select V/P (VPS/PDC).
• Press the › or ‚ button to select On or
Off.
26 - English
XEB ENG 4
27/03/2006
17:22
Page 27
Checking a Preset Recording
Cancelling a Preset Recording
You can check your preset recordings:
• When you have finished presetting the DVDVCR
• If you have forgotten which programmes will
be recorded.
You can cancel any programmes that are:
• Incorrect
• No longer required
1 Press the MENU button, then press the › or
‚ button to select PROG . The Timer
Method menu is displayed.
1 Press the MENU button, then press the › or
‚ button to select PROG.
The Timer Method menu is displayed.
Timer Method
SETUP
If you want to set the
Timer Method
DVD
timer program, press
SETUP
DVD
VCR
If you want to set the
VCR
timer program, press
PROG
the OK key.
the OK key.
PROG
FUNK
OK
RETURN
MENU
FUNC
OK
RETURN
MENU
2 Press the OK or Šbutton. The list of preset
recodings is displayed with the corresponding
information.
• It can be displayed simply by pressing the
TIMER button on the remote control.
2 Press the OK or Šbutton. The list of preset
recodings is displayed with the corresponding
information.
PR
01
Day
Start
Stop
Speed
V/P
SU 01
13 : 25
19 :: 57
SP
Off
--
--
-- -- -- -- ::-- --: :-:
:
:
:
:
:
:
:
OK
3
Press the › or ‚ button to select the
programme to be cancelled,then press the
CLEAR button .
PR
Day
Start
Stop
-- -- -- -- ::-- -- :: -RETURN
MENU
• It can be displayed simply by pressing the
TIMER button on the remote control.
:
:
:
:
:
:
:
:
:
:
OK
3 To change any values, select the required
programme by pressing the › or ‚ button,
then change any values as required. For
more details refer to page 26. (Step 2 to 9).
• Press the MENU button to exit the menu.
RETURN
Speed
V/P
--
--
MENU
• All the recording information is deleted and
broadcast will not be recorded.
• Press the MENU button to exit the menu.
English - 27
XEB ENG 4
27/03/2006
17:22
Page 28
P laying Back
Playing a Cassette
This function allows you to play any prerecorded cassette.
1 Switch on both the television and your
Selecting the Audio Output Mode
You can select the mode in which the sound is
reproduced on the loudspeakers and AV outputs.
The following options are available.
Press the AUDIO button on the remote control
until the required option is displayed.
➝ L ➝ R ➝ MIX ➝ MONO ➝ L R
DVD-VCR.
2 If the safety tab on the cassette is removed,
the cassette is played automatically.
• When a cassette is loaded, the tape position
is optimized automatically to reduce
disturbance (Digital Auto Tracking).
• When playing a cassette, if the end of the
tape is reached, the cassette is rewound
automatically. NTSC tapes can be played
back but cannot be recorded with this DVDVCR.
3 Press the ■ (stop) button to stop the
playback.
Press the
playback.
(eject) button to eject the
Adjusting Picture Alignment
Manually
This feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment manually by pressing the
TRK (› or ‚) button until the picture is clear
and stable.
• The tracking bar appears.
• The image is adjusted.
Option
Description
L
Used to listen to the sound on the left Hi-Fi channel.
R
Used to listen to the sound on the right Hi-Fi
channel.
MIX
Used to listen to the mixed sound of the Hi-Fi and
normal channels.
MONO
Used to listen to the sound on the normal mono
channel.
LR
Used to listen to Hi-Fi stereo sound on the left
and right channels
• When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
Playing a Cassette in Slow Motion
You can play a cassette in slow motion.
• No sound is heard when playing back a
cassette in slow motion.
1 Press the :
• Šll button to start playing the cassette.
• Šll button again to make still mode.
• ŠŠ button to start slow mode.
• ¥¥ or ŠŠ button as many times as
required to decrease or increase the
speed respectively.
• Šll button twice to return to the normal
speed.
• The slow motion feature does not support
running video backwards.
2 When playing back in slow motion, picture
interference may occur.
Press the TRK (› or ‚) button to minimize
this effect.
• When you have been using the Slow Motion
function for more than about two minutes,
the DVD-VCR will automatically play to
protect the:
- Cassette.
- Video heads.
28 - English
XEB ENG 4
27/03/2006
17:22
Page 29
Playing a Sequence Frame by
Frame
You can
• Stop the cassette at a given frame (image)
• Advance one frame at a time
No sound is heard when playing back frame by
frame.
Searching for a Specific Sequence
Each time you record a cassette on this DVDVCR, an “index” is automatically marked on the
tape when recording starts. The Search function
allows you to fast-forward or rewind to a specific
index and start playback from that point.
Depending on the direction selected, the indexes are numbered as follows:
• Šll button to start playing the cassette.
• Šll button again to make still mode.
• F.ADV button to advance frame by frame.
• Šll button to return to normal playback.
• Vertical stability: When playing back frame
by frame, interference may be seen on the
screen. Press the TRK (› or ‚) button to
minimize this effect.
Playing a Sequence at Variable
Speeds
You can vary the playback speed using the
Shuttle function (up to nine times the normal
speed). Example: You wish to analyse a sports
person’s technique, movement by movement.
• No sound is heard when playing a sequence
at variable speeds.
1 Press the :
• Šll button to start playing the cassette.
• SHUTTLE (<<) button to play the cassette
backwards.
• SHUTTLE (>>) button to play the cassette
forwards.
➔
1 Press the :
Prev
Seq.
etc.
2
Seq. being
played
1
REVERSE REVERSE REVERSE
SLOW SLOW
PLAY PLAY PLAY
PLAY
PLAY
PLAY STILL MOTION MOTION PLAY X3 X5 X9
X9
X5
X3
X1/10 X1/5
1
etc.
2
• This DVD-VCR uses a standard indexing
system (VISS). As a result, it will recognize
any indexes marked by other VCRs using the
same system and vice versa.
Go To [0:00:00] Stop
Use this feature when you want to search for
the 0:00:00 counter position on a cassette.
Press the CLEAR button at the point on the
tape where you want to set the counter to
0:00:00. The VCR will rewind or fast forward,
searching for the 0:00:00 counter position, and
then automatically stop at that position.
1 Press the MENU button, then press the › or
‚ button to select FUNC. The Function
menu is displayed. Press the OK or Š button.
2 Press the › or ‚ button to select VCR
Function, then press the OK or Š button.
The VCR Function menu is displayed with
the Go To [0:00:00] selected.
2 Each time you press the SHUTTLE button,
the speed is changed as shown in the
following illustration.
Next
Seq.
VCR Function
SETUP
Go To [0:00:00]
DVD
End Search
VCR
Intro Scan
PROG
FUNC
OK
RETURN
MENU
• It can be displayed simply by pressing the
SEARCH button.
3 Press the OK or Š button again.
English - 29
XEB ENG 4
27/03/2006
17:22
Page 30
4 When an Index mark is found the DVD-VCR
End Search
Use this feature when you want to search for a
blank position to record a program on a cassette.
The VCR will fast forward, searching for a blank
position, and then automatically stop at that
position. If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1 Press the SEARCH button. The VCR
Function menu is displayed. Press the › or
‚ button to select End Search.
VCR Function
SETUP
DVD
VCR
Go To [0:00:00]
End Search
Intro Scan
PROG
FUNC
OK
RETURN
MENU
2 Press the OK or Š button.
will playback the tape for 5 seconds, after
which it will continue searching for the next
Index mark
INTRO SCAN : ¥¥
5 If you want to watch the tape from a
particular Index, press the Šll button twice.
Index Skip Search
This feature will enable you to fast
forward/rewind to a specific point on a tape: e.g.
If you have recorded 3 different programmes on
a tape and you have rewound the tape to the
beginning, by using this feature you can go
directly to the start of programme 2 simply by
pressing the SEARCH button.
1 Press the SEARCH button.
The VCR Function menu is displayed.
Press the ›or‚button to select Intro Scan.
Intro Scan
VCR Function
1 Press the SEARCH button.
The VCR Function menu is displayed.
Press the › or ‚ button to select Intro Scan.
VCR Function
SETUP
DVD
VCR
SETUP
DVD
VCR
Go To [0:00:00]
End Search
Intro Scan
PROG
FUNC
Go To [0:00:00]
End Search
OK
RETURN
MENU
Intro Scan
2 Press the OK or Š button.
PROG
FUNC
OK
RETURN
MENU
2 Press the OK or Š button.
3 Press the ¥¥ or ŠŠ button depending on
the direction where your desired programme is
located.
INTRO SCAN : ¥¥ ŠŠ
3 Press the ¥¥ or ŠŠ button twice more.
4 These Index searches can be made forwards
(press the ŠŠ button) or backwards (press
the ¥¥ button).
(¥¥ -20 ● ● 0 ● ● +20 ŠŠ)
This will take you directly to the start of the
desired programme is located.
INDEX SEARCH : ¥¥ -06
To cancel an Index search simply press the
Šll or ■ button.
30 - English
XEB ENG 4
27/03/2006
17:22
Page 31
Using the Tape Counter
The tape counter:
• Indicates the elapsed time in the play and
record modes (Hours, Minutes and Seconds).
• Is reset when a cassette is inserted in the
DVD-VCR.
• Allows you to find the beginning of a sequence
easily.
• If the remaining time is to be calculated
correctly, you must indicate the type of
cassette being used.
1 Insert a cassette in your DVD-VCR.
To set the tape counter to zero at the beginning of a sequence:
0:00:00
• Press the INFO button twice to display the
counter.
• Press the CLEAR button when you want to
set the tape counter to zero.
2 When you are ready,
• Start Playback or Recording.
• Press the ■ button.
• To fast-froward or rewind to the sequence at
which the counter was set to zero, press the
¥¥ or ŠŠ button.
• Some DVD-VCR information, such as the
counter, can be displayed on the television
screen (Unless you have deactivated the
Screen Messages mode; refer to page 22).
Press the INFO button:
• Once to display the current function,
programme number, recording speed, time
and counter.
• Twice to display the counter only.
• Three times to display the time remaining on
the cassette.
• Four times to clear the display.
English - 31
XEB ENG 5
27/03/2006
17:22
Page 32
D VD F unctions
Setting Up the Language Features
If you set disc menu, audio and subtitle language in advance, it will come up automatically
every time you watch a movie.
Using the Disc Menu Language
1 Press the MENU button in the stop mode.
Using the Audio Language
1 Press the MENU button in the stop mode.
Press the › or ‚ button to select DVD, then
press the OK or Šbutton.
DVD Setup
SETUP
DVD
VCR
PROG
DVD Setup
DVD
VCR
PROG
Language Setup
Š
Audio Setup
Š
Display Setup
Š
Parental Setup :
Š
DivX(R) Registration
Š
Š
Audio Setup
Š
Display Setup
Š
Parental Setup :
Š
DivX(R) Registration
Š
FUNC
Press the › or ‚ button to select DVD, then
press the OK or Šbutton.
SETUP
Language Setup
OK
RETURN
MENU
2 Press the OK or Šbutton again.
Press the › or ‚button to select Audio,
then press the OK or Šbutton.
Language Setup
FUNC
OK
RETURN
MENU
Disc Menu
: English
Š
Audio
: English
Š
Subtitle
: English
Š
2 Press the OK or Šbutton again.
Press the › or ‚button to select Disc
Menu, then press the OK or Š button.
OK
RETURN
MENU
Language Setup
Disc Menu
: English
Š
Audio
: English
Š
Subtitle
: English
Š
3 Press the › or ‚ button to select the
required language.
Audio Language
Š English
Français
Deutsch
Audio
OK
RETURN
MENU
Español
Italiano
Nederlands
3 Press the › or ‚ button to select the
required language.
Others
OK
Disc Menu Language
Š English
Français
Deutsch
Disc Menu
Original
Español
Italiano
Nederlands
RETURN
• Select Original if you want the default
soundtrack language to be the original
language the disc is recorded in.
• Select Others if the language you want is
not listed.
Others
OK
RETURN
MENU
• Select Others if the language you want is
not listed.
32 - English
MENU
4 Press the OK button.
XEB ENG 5
27/03/2006
17:22
Page 33
Using the Subtitle Language
1 Press the MENU button in the stop mode.
Press the › or ‚ button to select DVD, then
press the OK or Šbutton.
Setting Up the Audio Options
1 Press the MENU button in the stop mode.
Press the › or ‚ button to select DVD, then
press the OK or Šbutton.
DVD Setup
DVD Setup
SETUP
DVD
VCR
PROG
Š
Language Setup
Audio Setup
Š
Display Setup
Š
SETUP
DVD
Parental Setup :
Š
VCR
DivX(R) Registration
Š
PROG
FUNC
Language Setup
Š
Audio Setup
Š
Display Setup
Š
Parental Setup :
Š
DivX(R) Registration
Š
FUNC
OK
RETURN
MENU
OK
2 Press the OK or Šbutton again.
Press the › or ‚button to select Subtitle,
then press the OK or Šbutton.
RETURN
MENU
2 Press the › or ‚button to select Audio
Setup, then press the OK or Šbutton. The
Audio Setup menu is displayed.
Language Setup
Audio Setup
Disc Menu
: English
Š
Dolby Digital Out
: PCM
Š
Audio
: English
Š
MPEG-2 Digital Out
: PCM
Š
Subtitle
: English
Š
DTS
: Off
Š
Dynamic Compression
: On
Š
PCM Down Sampling
: On
Š
OK
RETURN
MENU
OK
3
Press the › or ‚ button to select the
required language.
Subtitle Language
Automatic
Š English
Français
Deutsch
Español
Italiano
Nederlands
Others
Subtitle
OK
RETURN
RETURN
MENU
3 Press the › or ‚ button to select the
required item.
4 Press the OK or Šbutton to select the
required option.
Dolby Digital Out
MENU
• Select Automatic if you want the subtitle
language to be the same as the language
selected as the audio language.
• Select Others if the language you want is
not listed.
4 Press the OK button.
Note
• Some discs may not contain the language you
select as your initial language; in that case the disc
will use its original language setting.
• PCM: Converts to PCM (2CH) audio.
Select PCM when using the Analog
Audio Outputs.
• Bitstream: Converts to Dolby Digital Bitstream
(5.1CH).Select Bitstream when
using the Digital Audio Output.
Note
• Be sure to select the correct Digital Output or no
audio will be heard.
MPEG-2 Digital Out
• PCM: Converts to PCM (2CH) audio.
Select PCM when using the Analog
Audio Outputs.
• Bitstream: Converts to MPEG-2 Digital
Bitstream (5.1CH or 7.1CH).
Select Bitstream when using the
Digital Audio Output.
English - 33
XEB ENG 5
27/03/2006
17:22
Page 34
2 Press the › or ‚ button to select Display
DTS
• Off: Doesn’t output digital signal.
• On: Outputs DTS Bitstream via digital output
only. Select DTS when connecting to a
DTS Decoder.
Dynamic Compression
• On: To select dynamic compression.
• Off: To select the standard range.
Setup, then press the OK or Šbutton.
Display Setup
TV Aspect
: 4:3 L-Box
Š
Black Level
: Off
Š
NTSC Disc Output
: PAL60
Š
DVD Out
: RGB
Š
OK
PCM Down Sampling
• On: Select this when the amplifier connected
to the player is not 96KHz compatible. In
this case, the 96KHz signals will be down
converted to 48KHZ.
• Off: Select this when the amplifier connected
to the player is 96KHz compatible. In
this case, all signals will be output with
out any changes.
RETURN
MENU
3 Press the › or ‚ button to select TV Aspect,
press the OK or Šbutton.
TV Aspect
Š 4:3 Letter Box
4:3 Pan Scan
16:9 Wide
Note
• How to make the DVD menu disappear or return to
menu screen during set up; Press RETURN or ¥
button.
• Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Setting Up the Display Options
1 Press the MENU button in the stop mode.
Press the › or ‚ button to select DVD, then
press the OK or Šbutton.
DVD Setup
SETUP
DVD
VCR
PROG
Language Setup
Š
Audio Setup
Š
Display Setup
Š
Parental Setup :
Š
DivX(R) Registration
Š
FUNC
OK
RETURN
MENU
OK
RETURN
MENU
4 Press the › or ‚ button to select the
required item, then press the OK button to
select the required option.
TV Aspect
Depending on the type of television you have,
you may want to adjust the screen setting
(Aspect Ratio).
• 4:3 Letter Box :
Select when you want to see the total 16:9
ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars
will appear at the top and bottom of the
screen.
• 4:3 Pan Scan :
Select this for conventional size TVs when
you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie
picture will be cut off).
• 16:9 Wide :
You can view the full 16:9 picture on your
widescreen TV.
Black Level
Adjusts the brightness of the screen (On/Off).
34 - English
XEB ENG 5
27/03/2006
17:22
Page 35
NTSC Disc Output
Create Password
“NTSC” if the screen only has one NTSC-video
entrance. If this is not the case, you can choose
to leave “PAL60” as is.
Enter Password
DVD Out
– – – –
• RGB: Sends RGB signal from the AV JACK
(SCART terminal).
• S-Video: Sends S-VIDEO signal from the
AV JACK (S-Video terminal).
• Video: Sends COMPOSITE VIDEO signal
from the AV JACK (SCART terminal).
RETURN
The Re-enter Password menu is displayed to
confirm the password.
Create Password
Re-enter Password
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating
which helps you control the types of DVDs that
your family watches. There are up to 8 rating
levels on a disc.
1 Press the MENU button in the stop mode.
Press the › or ‚ button to select DVD, then
press the OK or Šbutton. Press the › or ‚
button to select Parental Setup.
DVD Setup
SETUP
DVD
VCR
PROG
Language Setup
Š
Audio Setup
Š
Display Setup
Š
Parental Setup :
Š
DivX(R) Registration
Š
– – – –
RETURN
4 Enter your password again.
The Use Password is set to Yes and the
Parental Setup menu is displayed.
The DVD-VCR is locked ( ).
Parental Setup
Use Password
: Yes
Š
Rating Level
:1
Š
OK
FUNC
OK
RETURN
Parental Setup
5 Press the › or ‚ button to select Rating
Level, then press the OK or Š button.
Parental Setup
Š
Use Password
: Yes
Š
Rating Level
:1
Š
Š
Change Password
OK
3 Press
RETURN
MENU
Setting up the Rating Level
The Use Password menu is displayed.
: No
RETURN
MENU
2 Press the OK or Šbutton.
Use Password
Š
Change Password
MENU
the OK or Šbutton again if you want
to use a password. The Enter Password
menu is displayed. Enter your password by
pressing the number buttons.
OK
RETURN
MENU
English - 35
XEB ENG 5
27/03/2006
17:22
Page 36
Rating Level
Level 8 Adult
DivX(R) Registration
Please use your registration code to register
this DVD-VCR with the DivX(R) Video On
Demand service. This will allow you to rent and
purchase videos using the DivX(R) Video On
Demand format. To learn more go to
www.divx.com/vod.
Level 7
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
OK
RETURN
MENU
6 Press the › or ‚ button to select the required
level (e.g. Level 6). Press the OK or Š button.
• Discs that contain Level 7 will now not play.
Changing the Password
7 Press the › or ‚ button to select Change
password.
1 Press the MENU button in the stop mode.
Press the › or ‚ button to select DVD.
The DVD Setup menu is displayed.
DVD Setup
SETUP
DVD
VCR
Parental Setup
Use Password
: Yes
Š
Rating Level
:1
Š
PROG
Language Setup
Š
Audio Setup
Š
Display Setup
Š
Parental Setup :
Š
DivX(R) Registration
Š
FUNC
OK
RETURN
MENU
Š
Change Password
2 Press the OK or Š button. Press the › or ‚
button to select DivX(R) Registration.
OK
RETURN
DVD Setup
MENU
SETUP
8 The Enter New Password is displayed. Enter
your password by pressing the number buttons.
Create Password
DVD
VCR
PROG
Language Setup
Š
Audio Setup
Š
Display Setup
Š
Parental Setup :
Š
DivX(R) Registration
Š
FUNC
OK
Enter New Password
– – – –
RETURN
MENU
3 Press the OK or Š button. A message is displayed.
DivX(R) Registration
RETURN
Your registration code is: XXXXXXXX .
The Re-enter Password is displayed to
confirm the password.
Please use this code to register this
player with the DivX(R) Video On Demand
service. This will allow you to rent and
purchase videos using the DivX(R) Video
Change Password
On Demand format. To learn more go to
www.divx.com/vod.
RETURN
Re-enter Password
– – – –
RETURN
9 Enter your password again.
• How to make the DVD menu disappear or
return to menu screen during set up; Press
the RETURN or ¥ button.
• If you have forgotten your password, refer to
Forgot Password in the Troubleshooting
Guide.
36 - English
DivX, DivX Certified,
and associated logos
are trademarks of
DivXNetworks, Inc and
are used under license.
MENU
XEB ENG 5
27/03/2006
17:22
Page 37
Firmware Upgrade
How to make an update disc
Please read the below information before
update procedure.
Write the downloaded file onto a blank CD-R
disc, using the following settings.
1 The following events may interrupt the update
1 Download the software update file from the
procedure and may result in permanent
damage to DVD-VCR.
• Unplugging the power cord.
• Power outage.
• Dirt or Scratch in the discs.
• Open a tray door during processing.
2 Playback can only support English Subtitle.
If you have any question or any problem,
please feel free to contact your nearest
SAMSUNG Service Center and agency.
DivX Feature Table
• A DivX disc may not be playable as playback
depends on the file format, the recording
conditions, the recording method, etc.
• A video file that has not been interleaved
supports only voice or video.
• Check the DivX disc format as this is not an
error.
• Normal operation is only possible when the
screen size is 720X480 pixels or less.
• A maximum of 65 characters for the caption
title of a DivX disc is supported.
• Unsupported caption content will be
displayed using asterisks (*).
DivX can be divided into Video and Audio.
Supported CODEC formats
DivX3, DivX4, DivX5 (GMC 1WP)
Supported file formats
*.avi, *.mpeg
Supported audio formats
AC3, MP3, WMA
Supported caption formats
* .SMI, * .SRT, * .SUB
Samsung Internet Site
(http://www.samsung.com/Support/Product
Support/Download/index. aspx).
After checking your DVD-VCR Model name
on the rear, download a file using the Search
Your Model/Name window.
2 Write the file to disc using CD-R driver of your
computer.
Software update file name: samca.rom
Please do not change the file name.
If you change the file name, DVD-VCR do not
recognize the update CD-R.
Note
• Recommended Application Program
- Nero Burning / Easy CD Creator.. etc
• Option
- Multisession; No Multisession
- CD close or Finalized CD
• In order to increase Disc Playability, add a dummy
file (over 100MB) together with the update file in
CD-R, not CD-RW. (The Dummy File can be used
any kind of file except jpg, mp3, wma file. Zip file
format is recommended).
Update procedure
1 Insert the update CD-R disc with the software
update. It takes about 30 seconds to load the
update disc.
2 READING appears at the left upper side of
the screen.
READING
Loading
English - 37
XEB ENG 5
27/03/2006
17:22
Page 38
3 ERASE and WRITE appears in turn at the
same location for about 40 sec during
firmware update.
Special Playback Features
During DVD/VCD/CD playback you can select
from the following special playback options.
To resume normal playback, press the Šll button.
ERASE
RETR 00
Still
Press the Šll button during playback.
• The picture will still and the audio will mute.
• To resume playback, press the Šll button.
• If the player is left in still mode for 5 minutes, it
will stop automatically.
4 It will be displayed DONE if the update is
Note
completed successfully.
• Frame Advance operates only in the forward direction.
DONE
RETR 00
Frame Advance (Step)
While in playback mode, press the F.ADV/STEP
button on the remote control to advance one
frame at a time.
• Audio is muted during frame advance mode.
• Press the Šll button to resume normal playback.
5 After update is completed, you have to power
off the unit and eject the update disc by using
the OPEN/CLOSE button once the unit turns
on.
6 Firmware update ir ended. Turn on your
er and enjoy a DivX movie.
Code Ver
Servo Ver
: XXXXXXXXX
: XXXXXXXXX
play-
Skip Forward/Back
While a CD or DVD disc is in play mode, press
the l¥¥ or ŠŠl button to jump forward and
backward through disc chapters/tracks.
• Skip Forward (ŠŠl) will jump to the next
chapter/track.
• Skip Back (l¥¥) will jump to the beginning of
the current chapter/track.
• Press the l¥¥ button again to jump to the
beginning of the previous chapter/track.
Search Forward/Back
• In order to check new version like the
upper, press the INFO button after
opening a tray.
Note
• The display can be changed depend on its
version and without any notice.
38 - English
While a disc is in play mode, press the ¥¥ or
ŠŠ button to visually search forward/backward
at 2X - 4X - 8X - 16X - 32X - 128X speed. Press
the Šll button to resume normal speed.
• VCD,CD : 2X - 4X - 8X - 16X - 32
Slow Motion
During playback, press the Šll button to still the
image. Then press the ŠŠŠŠl button to play
in slow motion at variable speeds.
• Each press increases the slow motion speed
playback to 1/8, 1/4 or 1/2 normal speed.
• Audio is muted during slow motion playback.
XEB ENG 5
27/03/2006
17:22
Page 39
Stop/Resume
• Press the ■ button once to stop playback.
To resume the DVD/VCD/CD from the point
where the disc stopped, press the Šll button.
• Press the ■ button twice to completely stop
playback. The next time you press the Šll
button, the disc will start over from the beginning.
Note
• Slow motion operates only in the forward direction.
Slow motion is not available for CD.
Using the Display Function
To view the current Title, Chapter/Track, and
counter position, press the INFO button during
DVD playback. The display screen can also be
used to quickly choose a title, chapter/track, or
playing time.
1 View the Display
During DVD/VCD/CD playback, press the
INFO button.
• To make the screen disappear, press the
INFO button again.
DVD
ENG 5.1CH
ENG
Off
MOVE
OK
VCD
CD
Off
Off
MOVE
OK
MOVE
OK
2 Press the ›or ‚ button to select the desired
item.
3 Press the ¥or Š button to make the desired
setup, then press the OK button.
• You may use the number buttons of the
remote control to directly access a title,
chapter or to start the playback from the
desired time.
4 To make the screen disappear, press the
INFO button again.
English - 39
XEB ENG 5
27/03/2006
17:22
Page 40
To access the desired title when
there is more than one in the disc.
For example, if there is more than
one movie on a DVD, each movie
will be identified. A DVD may
contain several different titles.
For example, if a disc contains four
different movies, each might be considered a title.
Most of DVD discs are recorded in
chapters so that you can quickly find
a specific passage.
Each Title on a DVD is usually divided into chapters (similar to tracks on
an audio CD).
Allows playback of the film from a
desired time.
Refers to the language of the film
soundtrack. In the example, the
soundtrack is played in English
5.1CH.A DVD disc can have up to
eight different soundtracks.
Refers to the subtitle languages
available in the disc.
You will be able to choose the subtitles language or, if you prefer, turn
them off from the screen.
A DVD disc can have up to 32
different subtitles.
A surround sound effect is generated using only two front speakers.
Note
• When in VCD 2.0 is in Menu Off mode only, this
function works. You can choose Menu On or Menu
Off by using the DISC MENU button.
40 - English
Adjusting the Aspect Ratio (EZ View)
This function may be different depending on the
type of disc.
To play using aspect ratio (DVD)
1 Press the EZ VIEW button.
• The screen size changes when the button is
pressed repeatedly.
• The screen zoom mode operates differently
depending on the screen setting in the initial
DVD menu.
• To ensure correct operation of the EZ VIEW
button, you should set the correct aspect
ratio in the initial setup.
If you are using a 16:9 TV
For 16:9 aspect ratio discs
- Wide Screen
Displays the content of the DVD title in
16:9 aspect ratio.
- Screen Fit
The top and bottom portions of the screen
are cut off. When playing a 2.35:1 aspect
ratio disc, the black bars at the top and
bottom of the screen will disappear. The
picture will look vertically stretched.
(Depending on a type of disc, the black
bars may not disappear completely.)
- Zoom Fit
The top, bottom, left and right of the
screen are cut off and the central portion
of the screen is enlarged.
For 4:3 aspect ratio discs
- Normal Screen
Displays the content of the DVD title in
16:9 aspect ratio. The picture will look
horizontally stretched.
- Screen Fit
The top and bottom portions of the screen
are cut off and the full screen appears.
The picture will look vertically stretched.
- Zoom Fit
The top, bottom, left and right portions
of the screen are cut off and the central
portion of the screen is enlarged.
)
XEB ENG 5
27/03/2006
17:22
Page 41
If you are using a 4:3 TV
Selecting the Subtitle Language
For 16:9 aspect ratio discs
- 4:3 Letter Box
Displays the content of the DVD title in
16:9 aspect ratio. The black bars will
appear at the top and bottom of the
screen.
- 4:3 Pan Scan
The left and right portions of the screen
are cut off an the central portion of the
16:9 screen is displayed.
- Screen Fit
The top and bottom portions of the screen
are cut off and a full screen appears.
The picture will look vertically stretched.
- Zoom Fit
The top, bottom, left and right portions of
the screen are cut off and the central
portion of the screen is enlarged.
Some DVDs provide subtitles in one or more
languages. You can use the SUBTITLE button
to quickly view and change settings.
For 4:3 aspect ratio discs
- Normal Screen
Displays the content of the DVD title in 4:3
aspect ratio.
- Screen Fit
The top and bottom portions of the screen
are cut off and the full screen appears.
The picture will look vertically stretched.
- Zoom Fit
The top, bottom, left and right portions of
the screen are cut off and the central
portion of the screen is enlarged.
1 During playback, press the SUBTITLE button.
ENG
ENG
On
Off
2 Press the ¥ or Š button to select the desired
subtitle language.
3 Press the › or ‚ button to select On.
• To make the menu bar disappear, press the
SUBTITLE button again.
ENG
ENG
On
Off
Note
• Le lingue di sottotitolo sono rappresentate dalle
abbreviazioni
• Questa funzione dipende da che cosa il languagesare messo sul disco e non può funzionare con tutto
il DVD.
• Il disco di DVD può contenere fino a 32 lingue di
sottotitolo.
• come fare la stessa lingua di sottotitolo venire in su
ogni volta che giocate un DVD. Riferiscasi a "usando la lingua di sottotitolo" alla pagina 33
English - 41
XEB ENG 6
27/03/2006
17:23
Page 42
Selecting the Audio Language
Zoom
Multiple language/audio setup options, such as
Dolby Digital 5.1, Dolby Pro Logic or LPCM 2
Channel audio are available on some DVDs.
You can use the AUDIO button to quickly view
and select the options available on a disc.
1 During playback, press the MENU button.
1 During playback, press the AUDIO button.
DVD
Press the › or ‚ button to select FUNC,
then press the OK or Š button.
The Function menu is displayed.
Function
SETUP
DVD
DVD Function
Š
VCR Function
Š
VCR
PROG
FUNC
VCD, CD
OK
Stereo
RETURN
MENU
2 Press the Š button, then press the › or ‚
button to select ZOOM.
• Press the ¥ or Š button to select stereo,
Left or Right.
2 Press the ¥ or Š button to select the desired
language or audio setup on the DVD.
• Languages are represented by abbreviations, e.g. ENG for English.
DVD Function
SETUP
DVD
Title Menu
Disc Menu
Info
Zoom
VCR
Bookmark
Repeat
PROG
EZ View
FUNC
OK
RETURN
MENU
Note
• This function depends on what languages are
encoded on the disc and may not work with all
DVDs.
• A DVD disc can contain up to 32 subtitle
languages.
• How to have the same audio language come up
whenever you play a DVD; Refer to “Using the
Audio Language” on page 32.
3 Press the OK or Š button.
Press the › / ‚ or ¥ / Š button to select
the part of the screen you want to zoom in on,
then press the OK button
Changing the Camera Angle
Some DVD Movies provide you with various
camera angle views on the same scene if disc
contains multiple angles.
1 Press the ANGLE button.
2 Press the ¥ or Š button to select a camera
angle you may wish to see.
42 - English
• Press the OK button to Zoom in
2X/4X/2X/Normal in order.
• You can also select Zoom function directly
using ZOOM button on the remote control.
XEB ENG 6
27/03/2006
17:23
Page 43
Marks
Repeat Chapter/Title
Up to three Bookmarks can be inserted for a
given DVD/VCD, allowing you to quickly jump to
your favorite scene or song.
You can repeat a single chapter or a complete
title.
1 During playback, press the MARK button.
1 Press the REPEAT button while in playback
mode to open the repeat menu.
The current repeat mode is displayed.
2 Press the ¥ or Š button to select
Chapter/Title. Press the OK button to repeat
the current chapter/Title.
2 Press the ¥ or Š
button to select one of the
three mark placeholders (- - -).
Keep on playing the DVD up to the scene you
want to mark, then press the OK button. The
placeholder (-) is changed to a number (1, 2
or 3).
DVD
Off
Chapter Title
Title A - B
Off Chapter
VCD, CD
Off
Off
1
1 —
—
Chapter Disc
Title A - B
Track
CLEAR
CLEAR
• You may continue to set up to three marks.
Press the MARK button again to exit the
mark menu.
Recalling a Maked Scene
1 During playback, press the MARK button.
2 Press the ¥ or Š button to select the mark
you want to recall.
3 Press the Šll button to play the mark.
Clearing Mark
1 During playback, press the MARK button.
2 Press the ¥ or Š button to select the mark
you want to delete.
• The menu will display Track in place of
Chapter if you are playing a VCD/CD.
Cancel Chapter/Title
1 Press the REPEAT button to open the repeat
menu.
2 Press the ¥ or Š button to selected Off,
then press the OK button.
DVD
Off
Chapter
Title
Track
Disc
VCD, CD
Off
• It is available to press the CLEAR button in
order to stop repeat play.
3 Press the CLEAR button to delete the mark.
• Press the MARK button again to exit the
mark menu.
Note
• Up to three scenes may be marked at a timer.
• When VCD 2.0 is in Menu Off mode only,
this function works.
• Depending on the disc, the mark function may not
work.
English - 43
XEB ENG 6
27/03/2006
17:23
Page 44
A to B Repeat
A to B Repeat feature enables you to repeat the
designated section on a DVD or VCD/CD. To
activate, mark where to start (A) and where to
end (B) of the section you want to watch.
1 Press the REPEAT button while in playback
mode, then press the ¥ or Š button to select
A-.
Cancel A-B Repeat
1 Press the REPEAT button to open the repeat
menu.
2 Press the ¥ or Š button to selected Off, then
press the OK button.
DVD
Off
Chapter
Title
Track
Disc
DVD
Off
Chapter
Title
VCD, CD
Off
VCD, CD
Off
Track
Disc
2 Press the OK button at the beginning of the
segment you want to repeat (Point A).
The B is selected.
• It is available to press the CLEAR button in
order to stop repeat play.
Note
• When in VCD 2.0 mode (MENU ON mode),
this function does not work.
• Use the DISC MENU button in the VCD 2.0 mode
to select MENU ON or OFF.
DVD
Off
Chapter
Title
VCD, CD
Off
Track
Disc
3 Press the OK button again at the end of the
segment you want to repeat (Point B).
The segment will begin repeating in a
continuous loop.
44 - English
XEB ENG 6
27/03/2006
17:23
Page 45
MP3/WMA Play
CD-R MP3/WMA discs
If you insert an MP3/WMA Disc into
the DVD-VCR, you can see the folder directory.
When playing CD-R/MP3 or WMA discs,
please follow all the recommendations for
CD-R above, plus the comments below:
Your MP3 or WMA files should be ISO
9660 or JOLIET format.
ISO 9660 format and Joliet MP3 or WMA
files are compatible with Microsoft's DOS
and Windows, and with Apple's Mac. These
two formats are the most widely used.
When naming your MP3 or WMA files do
not exceed 8 characters, and place
".mp3, .wma" as the file extension.
General name format of: Title.mp3. or
Title.wma. When composing your title,
make sure that you use 8 characters or
less, have no spaces in the name, and
avoid the use of special characters
including: (.,/,\,=,+).
Use a decompression transfer rate of at
least 128Kbps when recording MP3 files.
Sound quality with MP3 files basically
depends on the rate of compression
/decompression you choose. Getting audio
CD quality sound requires an analog/digital
sampling rate, that is conversion to MP3
format, of at least 128Kbps and up to
160Kbps. However, choosing higher rates,
like 192Kbps or more, only rarely give
better sound quality. Conversely, files with
decompression rates below 128Kbps will
not be played properly.
Use a decompression transfer rate of at
least 64Kbps when recording WMA files.
Sound quality with WMA files basically
depends on the rate of compression
/decompression you choose. Getting audio
CD quality sound requires an analog/digital
sampling rate, that is conversion to WMA
format, of at least 64Kbps and up to
192Kbps. Conversely, files with decompression rates below 64Kbps or over 192Kbps
will not be played properly.
Do not try recording copyright protected
MP3 files.
Certain "securized" files are encrypted and
code protected to prevent illegal copying.
These files are of the following types:
Windows MediaTM (registered trade mark
of Microsoft Inc) and SDMITM (Registered
trade mark of The SDMI Foundation). You
cannot copy such files.
Important :
The above recommendations cannot be
taken as a guarantee that the DVD-VCR
will play MP3 recordings, or as an assurance of sound quality. You should note that
certain technologies and methods for MP3
file recording on CD-Rs prevent optimal
playback of these files on your DVD
player (degraded sound quality and in some
cases, inability of the player to read the
files).
MP3/WMA Play Function
1 Press the › or ‚ button to select the desired
music folder, then press the OK button.
Total : 3/4
ROOT
ROOT
AVI
JPEG
MP3
WMA
• Up to 7 music folders can be displayed at a
time. If you have more than 8 folders on a
disc, press the ‚button to display them.
2 Press the › or ‚ button again to select a
music file. Press the OK button to begin playback of a music file.
Total : 1/3
ROOT
AVI
JPEG
MP3
WMA
MP3
MP3
MP3
..
A
B
C
Repeat
1 Press the REPEAT button in play mode to
hear only music continuously and press it
once again to release.
Total : 1/3
ROOT
AVI
JPEG
MP3
WMA
Repeat file
MP3
MP3
MP3
..
A
B
C
English - 45
XEB ENG 6
27/03/2006
17:23
Page 46
Program & Random
Play(CD/MP3/WMA)
RANDOM
PROGRAM
You can listen to songs randomly or in the
desired sequence.
Program Play
1 Press the MODE button in the stop mode.
Press the ¥ or Š button to select PROGRAM.
Press the OK button.
PROGRAM
RANDOM
RETURN
OK
2 Press the ›/‚,¥/Š buttons to select the first
track to add to the program. Press the OK
button. The selection numbers are displayed in
the Program Order box.
PROGRAM 01
Program Order
MP3
01
05
09
13
02
06
10
14
03
07
11
15
04
08
12
16
-
-
-
-
RETURN
-
-
-
-
ROOT
AVI
JPEG
MP3
WMA
MP3
MP3
MP3
..
A
B
C
• Depending on the disc, the Program and
Random Play functions may not work.
• To resume normal play, press the CLEAR
button.
Picture CD Playback
If you insert a Picture (JPEG) CD Disc into the
DVD-VCR, you can see the folder directory.
1 Press the › or ‚ button to select the picture
you want to view, then press the OK button.
The selected picture is displayed.
CLEAR
Total : 1/215
ROOT
JPEG
3 Press the Šll button.
JPEG
JPEG
The disc will be played in programmed order.
JPEG
JPEG
JPEG
Cancel Program play
JPEG
ROOT
JPEG01
JPEG02
JPEG03
JPEG04
JPEG05
JPEG06
JPEG07
During playback, press the CLEAR button.
2 Press the l¥¥ or ŠŠl button to display the
Random Play
1 Press the MODE button in the stop mode.
previous or next picture.
Photo : 1/215
OK
2 Press the ¥ or Š button to select RANDOM.
Press the OK button.
The disc will be played in random order.
46 - English
RETURN
XEB ENG 6
27/03/2006
17:23
Page 47
Note
• If no buttons on the remote control are pressed for
10 seconds, the menu bar will disappear.
Press the DISC MENU button on the remote
control to display the menu bar.
Slide show
Press the ¥ or Šbutton to select
.
Press the OK button. The 3 icons are displayed
for time interval.
Photo : 1/215
Album Mode
OK
Press the ¥ or Š button to select
Press the OK button.
The album mode is displayed.
Album
RETURN
.
Photo : 1/215
Timer :
OK
RETURN
• Press the ›/‚,¥/Š buttons to select the
required picture, then press the OK button.
The selected picture is displayed.
• Press the l¥¥ or ŠŠl button to display the
previous or next 6 pictures.
Press the ¥ or Š button to select one of these.
Press the OK button.
Rotation
Press the ¥ or Š button to select
.
Each time the OK button is pressed, the picture
rotates 90 degrees clockwise.
Photo : 1/215
OK
RETURN
The pictures change automatically with
about an 6 second interval.
The pictures change automatically with
about an 12 second interval.
The pictures change automatically with
about an 18 second interval.
• Depending on the file size, each interval
between images may take longer or shorter
than the manual suggests.
Zoom
Press the ¥ or Š button to select
.
Each time the OK button is pressed, the picture
is enlarged up to 4X.
(Normal ➝ 2X ➝ 4X ➝ Normal)
Photo : 1/215
OK
RETURN
English - 47
XEB ENG 6
27/03/2006
17:23
Page 48
CD-R JPEG Discs
• Only files with the “.jpg” and “.JPG” extensions
can be played.
• If the disc is not closed, it will take longer to
start playing and not all of the recorded files
may be played.
• Only CD-R discs with JPEG files in ISO 9660
or Joliet format can be played.
• The name of the JPEG file may not be longer
than 8 characters and should contain no blank
spaces or special characters (. / = +).
DivX/MPEG4 Playback
1 When the disc is inserted, the file structure of
the disc will be shown. Depending on the file
format, a different icon will appear next to
each file. The
and
files will have been
highlighted.
Use › or ‚ button to select the movie file,
and then press OK or Šll.
Result : When the 'Reading Index......'
message is displayed, wait for a
second or two. The movie will be
played back.
• Only a consecutively written multisession disc
can be played. If there is a blank segment in
the multisession disc, the disc can be played
only up to the blank segment.
DivX
DivX
DivX
• When playing a Kodak Picture CD, only the
JPEG files in the pictures folder can be
played.
• Picture discs other than Kodak Picture CD
may take longer to start playing or may not
play at all.
If the "Cannot support" message is
displayed, the selected file cannot
be played back.
2 To navigate to a specific time while viewing
the movie, press the INFO button.
The file format of the current file (
or
and time information will be displayed.
)
DivX
1/1
Off
~
3 Use the number buttons on the remote control
to enter the time to jump to that time in the
movie.
48 - English
XEB ENG 6
27/03/2006
17:23
Page 49
DivX/MPEG4 Special Playback
Features
During DivX/MPEG4 playback you can select
from the following special playback options.
5 Zoom
During play, press the MENU button on the
remote control. Then press the › or ‚ button
to select the FUNC , then press the OK or Š
button. The Function menu is displayed.
1 Still
Press the Šll button on the remote control
during playback.
• The picture will still and the audio will mute.
• To resume playback, press the Šll button.
• If the player is left in Still mode for 5
minutes, it will stop automatically.
Function
SETUP
DVD
DVD Function
Š
VCR Function
Š
VCR
PROG
FUNC
RETURN
OK
MENU
2 Frame Advance (Step)
While in playback mode, press the
F.ADV/STEP button on the remote control to
advance one frame at a time.
• Audio is muted during Frame Advance mode.
• Press Šll to resume normal playback.
• Press the › or ‚ button to select DVD
Function. Press the OK or Š button.
• Press the › or ‚ button to select ZOOM,
then press the OK button.
DVD Function
3 Slow Motion
During playback, press the Šll button to Still
the image. Then use the Search ŠŠ to play in
slow motion at variable speeds.
• Each press increases the slow motion
speed playback to 1/8, 1/4 or 1/2 normal
speed.
• Audio is muted during slow motion playback.
• The Search function may not operate
depending on the condition of the disc.
4 Stop/Resume
• Press the ■ button once to stop playback. To
resume the DivX/MPEG4 from the point
where the disc stopped, press the Šll button.
Note
• Frame advance and slow motion operate only in the
forward direction.
SETUP
DVD
Title Menu
Disc Menu
Info
Zoom
VCR
Bookmark
Repeat
PROG
EZ View
FUNC
OK
RETURN
MENU
• Press the ›/‚ or ¥/ Šbutton to select the
part of the screen you want to zoom in on,
then press the OK button.
The screen will be enlarged to twice the
normal size.
Auto Scaling : CIF(100kbps)~D1(784kbps)
resolution. If the file resolution
is times automatically. So you
can see the more larger screen.
English - 49
XEB ENG 7
27/03/2006
17:24
Page 50
Technical Specifications
General
Rated voltage
AC 220 - 240V, 50Hz
Power consumption
19Watts
Weight
3.9 Kg
Size
430mm X 282mm X 82mm
Operating ambient temperature
+5°C ~ +40°C
Installation conditions
Operation position : Horizontal,
Relative humidity : Below 75%
Input
Output
Video input (Rear)
Euro Scart socket : 1.0Vp-p (unbalanced)
Audio input (Rear)
Euro Scart socket : -8dBm, 47Kohm unbalanced
Input (Front)
RCA jack
Audio (DVD, VCR)
RCA jack, Euro Scart socket
Audio (DVD only)
COAXIAL, RCA jack
Video (DVD, VCR)
RCA jack, Euro Scart socket
Video (DVD only)
S-Video out, Component
RGB out : Euro Scart socket
Tape format
VHS type video tape
Colour system
PAL,SECAM,MESECAM,NTSC4.43, NTSC
playback on PAL TV
VCR
DVD
Tuning system
SECAM-L, B/G
Video S/N
Above 43dB (standard recording)
Resolution
Above 240 lines (standard recording)
Audio S/N
Above 68dB (Hi-Fi), 39dB (Mono)
Audio frequency characteristics
20Hz - 20KHz (Hi-Fi)
Disc
DVD, VCD, CD.
Audio S/N
100dB
Audio dynamic range
95dB
50 - English
XEB ENG 7
27/03/2006
17:24
Page 51
Troubleshooting Guide (VCR)
Before contacting the Samsung after-sales service, perform the following simple checks.
If you are unable to solve the problem after reading the below instructions, note:
• The model and serial number on the rear of your DVD-VCR.
• The warranty information.
• A clear description of the problem.
Then contact your nearest SAMSUNG after-sales service.
Problem
Solution
No power
◆ Check that the power plug is connected to a wall outlet.
◆ Have you pressed the STANDBY/ON button?
You cannot insert a video cassette
◆ A video cassette can only be inserted with the window
side up and the safety tab facing you.
The television programme
was not recorded
◆ Check the DVD-VCR aerial connections.
◆ Is the DVD-VCR tuner properly set?
◆ Check if the safety tab is intact on the cassette.
Timer recording was unsuccessful
◆ Was the STANDBY/ON button pressed to activate the timer?
◆ Re-check the recording start/stop time settings.
◆ If there was a power failure or interruption during timer
recording, the recording will have been cancelled.
You cannot see normal broadcasts
◆ Check the tuner or external setting. It should be on tuner.
◆ Check the TV or VCR aerial connections.
Noise bars or streaks on playback
› or ‚ ) buttons to minimize this effect.
◆ Press the TRK (›
When the ŠII button is pressed
during playback, the still picture
has severe “noise bars” streaks
◆ A still picture may have “noise bars”, depending on the
condition of the tape. Press the TRK (›
› or ‚) buttons
during slow motion to minimize this effect.
Video Head Cleaning
◆ If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads
English - 51
XEB ENG 7
27/03/2006
17:24
Page 52
Troubleshooting Guide (DVD)
Problem
Disc does not play.
Solution
Page
◆ Ensure that the disc is installed with the label side facing up.
◆ Check the region number of the DVD.
◆ This DVD-VCR cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, or a CD.
P3
◆ 5.1 channel sound is reproduced only when the following conditions are met.:
1) The DVD-VCR is connected with the proper amplifier.
5.1 channel sound is not
2) The disc is recorded with 5.1 channel sound.
being reproduced.
◆ Check whether the disc being played has the “5.1 ch” mark on the outside.
◆ Check if your audio system is connected and working properly.
P12
P33~34
◆ The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
The
icon appears on
2. The DVD’s software doesn’t support the feature (e.g., angles).
screen.
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of
range.
P32~47
Playback mode differs
from the Setup menu
selection.
◆ Some of the functions selected in the Setup menu may not work
properly if the disc is not encoded with the corresponding function.
P32~36
The screen ratio cannot
be changed.
◆ The screen ratio is fixed on your DVDs.
P34
No audio.
◆ Make sure you have selected the correct Digital Output in the Audio Options
Menu.
P33
Forgot password.
◆ Press STANDBY/ON with no disc in the unit. Press the ŠŠ button on the
front panel for five seconds. Power off and on the DVD-VCR by pressing
STANDBY/ON button. The parental mode is now unlocked as indicated on the P35~36
display. You can now set your rating level and change your password to a new
number.
If you experience other
problems.
◆ Check the contents of the instruction book that contains the explanations
regarding the current problem and follow the procedure once again.
◆ If the problem still cannot be solved, please contact your nearest authorized
service center.
52 - English
XEB ENG 7
27/03/2006
17:24
Page 53
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.
Region
North America
Latin America
Europe
CIS
Country
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
RUSSIA
UKRAINE
AUSTRALIA
CHINA
HONG KONG
INDIA
Asia Pacific
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
Middle East & Africa
TAIWAN
VIETNAM
SOUTH AFRICA
U.A.E
Customer Care Center ☎
1-800-SAMSUNG (7267864)
01-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)
0800-333-3733
0800-124-421
800-726-7864(SAMSUNG)
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-7267-864
1-800-100-5303
02 201 2418
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (0,15 /Min)
01805 - 121213 ( 0,12/Min)
06 40 985 985
199 153 153
02 261 03 710
0900 20 200 88 ( 0.10/Min)
231 627 22
0 801 801 881
80 8 200 128
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
8-800-200-0400
8-800-502-0000
1300 362 603
800-810-5858, 010- 6475 1880
2862 6001
3030 8282
1600 1100 11
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
02-689-3232
0800-329-999
1 800 588 889
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
Web Site
www.samsung.com/ca
www.samsung.com/mx
www.samsung.com
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.ru
www.samsung.com/ur
www.samsung.com/au
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/za
www.samsung.com/mea
XEB ENG 7
27/03/2006
17:24
Page 54
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
☎ 0870 242 0303 / www.samsung.com/uk
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
AK68-00954B
Download PDF

advertising