Samsung | UE40D5520RW | Samsung UE40D5520RW Benutzerhandbuch

E-MANUAL
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model______________ Serial No.______________
Contents
Channel
• Connecting to a Wireless Network
98
• Connecting a USB Device
218
• Using the INFO button (Now & Next guide)3
• Connecting to a Wireless Network
105
• Connecting to the PC through network
219
• Using the Channel Menu
4
• Setting the network
109
• Recorded TV
228
• Using the Channel
12
• Setting the Time
127
• Videos239
• Using Favourite Channels
21
• Locking Programme
136
• Music247
• Memorising Channels
23
• Economical Solutions
139
• Photos253
• Using the Channel (for Satellite TV) 32
• Other Features
145
• Media Contents - Additional Function
• Using Favourite Channels (for Satellite TV) 37
• Picture In Picture (PIP)
153
• Memorising Channels (for Satellite TV)
39
• Support156
• Other Features
51
Other Information
• Troubleshooting265
Advanced Features
Basic Features
255
• Using the 3D function
163
• Connecting to a
COMMON INTERFACE slot
277
282
287
• Changing the Preset Picture Mode
53
• Getting Started with Smart Hub
175
• Adjusting Picture Settings
54
• Setting up Smart Hub
187
• Teletext Feature
(depending on the country)
• Changing the Picture Size
55
• Using the Smart Hub service
190
• Anti-theft Kensington Lock
• Changing the Picture Options
62
• Troubleshooting for SMART HUB
195
• Licence289
• Setting up the TV with Your PC
71
• About AllShare™
198
• Changing the Preset Sound Mode
75
• Setting Up AllShare™
199
• Adjusting Sound Settings
76
• Anynet+203
• Selecting the Sound Mode 87
• Setting Up Anynet+
208
• Switching between Anynet+ Devices
210
• Listening through a Receiver
212
• Troubleshooting for Anynet+
214
• Using the Media Contents
217
Preference
• Connecting to a Wired Network
88
e-Manual Guide
• How to view the e-Manual
291
Channel
❑❑ Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video
settings.
The Now & Next guide shows daily TV programme information for each channel
according to the broadcasting time.
●● Scroll l, r to view information for a desired programme while watching the
current channel.
●● Scroll u, d to view information for other channels. If you want to move to the
currently selected channel, press the ENTERE button.
abc1
18:11 Thu 6 Jan
DTV Air
, Life On Venus Avenue
15
Unclassified
No Detaild Information
18:00 ~ 6:00
a Information
English
▶
❑❑ Using the Channel Menu
Press the SMART HUB button to select the
menu you want to use. Each screen will be
displayed.
■■ Guide
Samsung Apps
Recommended
Favourites
Channel
Videos
Photos
Music
Schedule Manager
Source
The EPG (Electronic Programme Guide)
●● The displayed menu may differ depending on the
information is provided by broadcasters.
model.
Using programme schedules provided by
broadcasters, you can specify programmes you want to watch in advance so
that the channel automatically changes to the selected programme channel at the
specified time. Programme entries may appear blank or out of date depending on
a channel status.
a Login b Sort by { Edit Mode } Settings
◀
English
▶
Using Channel View
a Red (Sche. Mgr): Displays the
Schedule Manager.
Guide
2:10 Tue 1 Jun
DTV Air 800 five
Home and Away
18:00 - 18:30
Drama
b Green (-24 Hours): Viewing the list
of programmes to be broadcasted
before 24 hours.
◀
Dani is devastated when scott makes clear his views on marriage...
Channel View - All
{ Yellow (+24 Hours): Viewing the
list of programmes to be broadcasted
after 24 hours.
Today
18:00 1
Discovery
American Chopper
2
DiscoveryH&L
Programmes resume at 06:00
3
five
Home and...
4
price-drop.tv
No Information
5
QVC
QVC Selection
6
R4DTT
No Information
18:30
19:00 Tine Team
No Information
Fiv...
Dark Angel
a Sche. Mgr b -24 Hours { +24 Hours } Ch. Mode ` Information k Page E Schedule
} Blue (Ch. Mode): Select the type of channels you want to display on the
Channel View window.
English
19:30
▶
`Information: Displays details of the selected programme.
k (Page): Move to next or previous page.
E (Watch / Schedule): When selecting the current programme, you can watch
the selected programme. / When selecting the next programme, you can reserve
the selected programme.
◀
▶
English
■■ Schedule Manager
OO SMART HUB → Schedule Manager → ENTERE
You can view, modify or delete a channel you have reserved to watch.
Using the Timer Viewing
You can set a desired channel to be displayed automatically at the intended time.
Set the current time first to use this function.
◀
1. Press the ENTERE button to add manual booking. A pop up screen will
appear.
2. Press the l or r button to select the Timer Viewing.
English
▶
3. Press the l / r / u / d buttons to set the Antenna, Channel, Repeat or
Start Time.
●● Antenna: Select the desired antenna source.
●● Channel: Select the desired channel.
●● Repeat: Select Once, Manual, Sat~Sun, Mon~Fri or Everyday to set at
your convenience. If you select Manual, you can set the day you want.
NN The c mark indicates the date you've selected.
◀
●● Date: You can set the desired date.
NN It is available when you select Once in Repeat.
●● Start Time: You can set the start time you want.
English
▶
NN On the Information screen, you can change or cancel a reserved information.
●● Cancel Schedules: Cancel a show you have reserved to watch.
●● Edit: Change a show you have reserved to watch.
●● Return: Return to the previous screen.
NN Only memorised channels can be reserved.
◀
▶
English
■■ Channel List
Channel List
You can view all the channel searched.
OO When you press the CH LIST button on the
remote control, Channel List screen will be
displayed at once.
All
1
A
2
B
3
C
4
D
5
E
No Information
6
F
7
G
8
H
9
I
10
J
11
K
12
L
Air
a Antenna { Programme View L Ch.Mode E Watch k Page
●● The displayed image may differ depending on the
model.
◀
▶
English
NN Using the operation buttons with the Channel List.
●● a Red (Antenna): Switches to Air, Cable.
NN The option may differ depending on country.
●● { Yellow (Programme View / Channel View): Displays the programme when
digital channel is selected. Returns to the channel view.
●● l r Ch. Mode / Channel: Move to the type of channels you want to display on
the Channel List screen. / Change channels.
◀
NN When you press the { (Programme View) button, you can move to other
channels using l r (Channel) button.
NN The option may differ depending on country.
●● E Watch / Information: Watches the channel you select. / Displays details of
the selected programme.
●● k Page: Move to next or previous page.
English
▶
❑❑ Using the Channel
NN The option may differ depending on country.
■■ Channel
OO SMART HUB → Channel → ENTERE
Delete added channels or set favourites channels and use the programme guide
for digital broadcasts. Change the antenna or channel settings using the menus in
the top right corner of the screen.
◀
▶
English
●●
Antenna: Toggle among antenna sources.
NN The option may differ depending on country.
●●
●●
◀
Sort: Sorting by Channel Number or Channel Name.
Edit Mode: Delete channels assigned to Favourites. Refer to “Using the
Favourite Channels” for details on how to assign a channel to favourite. Setting
channels you watch frequently as Favourites.
1. Select the
Edit Mode icon on the upper right of your screen, and then
press the ENTERE button.
English
▶
2. Press the arrow buttons to select a channel as a Favourite, and then press
ENTERE. A check appears to the left of the channel.
NN You can select more than one channel.
NN Pressing ENTERE again deselects the channel.
3.Select Edit Favourites at the bottom of your screen, and then press
ENTERE button. The Edit Favourites pop-up appears.
◀
▶
English
4. Highlight a group on the Favourites list, and then press ENTERE.
NN The Edit Favourites screen has five groups (Favourites 1, Favourites 2,
etc.). You can add a Favourite channel to any one of the groups. Select
a group using the up and down arrows on your remote.
5.Select OK, press ENTERE, and then press ENTERE again.
6.Press RETURNR to exit Edit Mode.
◀
▶
English
●● Using Edit Mode to Delete a Channel from the Channel List.
1. Select the Edit Mode icon on the upper right of your screen, and then
press the ENTERE button.
2. Press the l / r / u / d buttons to select a channel, and then press
ENTERE. A check appears to the left of the channel.
NN You can select more than one channel.
NN Pressing ENTERE again deselects the channel.
◀
3.Select Delete at the bottom of your screen, and then press ENTERE.
A pop-up appears asking if you want to delete the item.
English
▶
4.Select OK, press ENTERE, and then press ENTERE again.
The channel is deleted from the Channel List.
5.Press RETURNR to exit Edit Mode.
●● Select All: Select all the channels.
◀
▶
English
Using the TOOLS button with the Channel
●● Upcoming programme (digital channels only): View details on the programme
being aired on a selected digital channel.
●● Edit Favourites: Set channels you watch frequently as favourites.
1. Select the Edit Favourites, then press the ENTERE button.
2. Press the ENTERE button to select Favourites 1-5, then press the OK
button.
◀
NN One favourite channel can be added in several of favourite channels
among Favourites 1-5.
●● Lock / Unlock: Lock a channel so that the channel cannot be selected and
viewed.
English
▶
NN NOTE
●● This function is available only when the Channel Lock is set to On.
●● Edit Channel Name (analogue channels only): Assign your own channel name.
NN This function may not be supported depending on the region.
●● Edit Channel Number: Select the channel number to change.
NN This function may not be supported depending on the region.
◀
●● Delete: Delete a channel to display the channels you want.
English
▶
Channel Status Display Icons
Icon
Operations
a
An analogue channel.
c
A channel selected.
F
A channel set as a Favourites 1-5.
\
A locked channel.
◀
▶
English
❑❑ Using Favourite Channels
■■ Favourites
OO SMART HUB → Favourites → ENTERE
Shows all favourite channels.
●● Edit Favourites t: You can set the selected channels to desired
favourites channels.
◀
NN The “F” symbol wil be displayed and the channel will be set as a favourite.
English
▶
1. On the Channel screen, select a channel and press the TOOLS button.
NN If you want to add mulitple channels, use the Edit Mode menu in the top
right corner of the Channel screen.
2. Add or delete a channel in the favourite channels you want among 1, 2, 3, 4
and 5.
NN One or more groups can be selected.
NN The c mark appears to the left of the selected channels.
◀
3. After you have changed the settings, the channel list for each group can be
viewed in favourite channels.
English
▶
❑❑ Memorising Channels
OO MENUm → Channel → ENTERE
■■ Antenna t
NN The option may differ depending on country.
Before your television can begin memorising the available channels, you must
specify the type of signal source that is connected to the TV
◀
▶
English
■■ Country (Not available in some locations.)
NN The PIN input screen appears. Enter your 4 digit PIN number.
NN Select your country so that the TV can correctly auto-tune the broadcasting
channels.
●● Digital Channel: Change the country for digital channels.
●● Analogue Channel: Change the country for analogue channels.
◀
▶
English
■■ Auto Tuning
●● Auto Tuning
Scans for a channel automatically and stores in the TV.
NN Automatically allocated programme numbers may not correspond to actual or
desired programme numbers. If a channel is locked using the Channel Lock
function, the PIN input window appears.
–– Antenna source: Select the antenna source to memorise. The option may
◀
differ depending on country.
–– Digital & Analogue / Digital / Analogue: Select the channel source to
memorise. When selecting Cable → Digital & Analogue or Digital: Provide
a value to scan for cable channels.
–– Search Mode (Full / Network / Quick): Scans for all channels with active
broadcast stations and stores them in the TV.
English
▶
NN If you select Quick, you can set up the Network, Network ID,
Frequency, Modulation, and Symbol Rate manually by press the
button on the remote control.
–– Network (Auto / Manual): Selects the Network ID setting mode among
Auto or Manual.
–– Network ID: When Network is Manual, you can set up Network ID using
the numeric buttons.
◀
–– Frequency: Displays the frequency for the channel. (differs in each country)
–– Modulation: Displays available modulation values.
–– Symbol Rate: Displays available symbol rates.
English
▶
–– Automatic Ordering for Italy : Channels found will be automatically ordered
following a criterion established by all the main national and local televisions.
–– Others Ordering for Italy : If you select this menu you will find others
channels ordering directly organized from private national televisions.
NN Automatic Ordering and Others Ordering are available when antenna source
is set to Air.
NN The option may differ depending on country.
◀
▶
English
■■ Cable Search Option
(depending on the country)
Sets additional search options such as the frequency and symbol rate for a
cable network search.
–– Freq.Start / Freq.Stop: Set the start or stop frequency (differs in each
country)
–– Symbol Rate: Displays available symbol rates.
◀
–– Modulation: Displays available modulation values.
■■ Standby Auto Store (Off / On)
in standby mode.
for Italy :
Enables or disables auto-tune while TV is
■■ Wake-up Timer (1 hour later / 2 hours later / 00:00 / 02:00 / 12:00 /
14:00) for Italy : Selects the schedule timer to turn the TV on and scan channels
automatically.
English
▶
■■ Manual Tuning
Scans for a channel manually and stores in the TV.
NN If a channel is locked using the Channel Lock function, the PIN input window
appears.
●● Digital Channel Tuning: Scans for a digital channel.
1. Press the u / d / l / r button to select New.
NN When selecting Antenna → Air: Channel, Frequency, Bandwidth
◀
NN When selecting Antenna → Cable: Frequency, Modulation, Symbol
Rate
2. Press the d button to select Search. When scanning has finished, a
channel is updated in the channel list.
English
▶
●● Analogue Channel Tuning: Scans for a analogue channel.
1. Press the u / d / l / r button to select New.
2. Set the Programme, Colour System, Sound System, Channel and
Search.
3. Press the d button to select Store. When scanning has finished, a channel
is updated in the channel list.
◀
▶
English
NN Channel mode
●● P (programme mode): When tuning is complete, the broadcasting stations
in your area have been assigned to position numbers from P0 to P99. You
can select a channel by entering the position number in this mode.
●● C (aerial channel mode) / S (cable channel mode): These two modes allow
you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
◀
▶
English
❑❑ Using the Channel (for Satellite TV)
for LED 5700 and above, for PDP TV
NN The option may differ depending on country.
■■ Channel
OO SMART HUB → Channel → ENTERE
◀
Delete added channels or set favourites channels and use the programme guide
for digital broadcasts. Select a channel in the All Channels, Analogue, TV, Radio
and Data / Other screen. Change the antenna or channel settings using the
menus in the top right corner of the screen.
●●
Antenna: Toggle among the antenna sources.
NN The option may differ depending on country.
●●
●●
Sort: Sorting by Channel Number or Channel Name.
Edit Mode: Edit the channels as you want. Refer to “Using the Favourite
Channels” for details on how to assign a channel to favourite.
●● Select All: Select all the channels.
English
▶
Using the TOOLS button with the Channel
●● Edit Favourites: Set channels you watch frequently as favourites.
1. Select the Edit Favourites, then press the ENTERE button.
2. Press the ENTERE button to select Favourites 1-5, then press the OK
button.
NN One favourite channel can be added in several of favourite channels
among Favourites 1-5.
◀
▶
English
●● Lock / Unlock: Lock a channel so that the channel cannot be selected and
viewed.
NN NOTE
●● This function is available only when the Channel Lock is set to On.
●● Edit Channel Name (analogue channels only): Assign your own channel name.
NN This function may not be supported depending on the region.
●● Edit Channel Number: Select the channel number to change.
◀
NN This function may not be supported depending on the region.
English
▶
●● Upcoming programme (digital channels only): View details on the programme
being aired on a selected digital channel.
●● Search: You can search the desired channels according to the settings.
●● Reorder: (when the Antenna was set to Satellite): Rearrange the channel
manager in numerical order.
●● Delete: Delete a channel to display the channels you want.
◀
▶
English
Channel Status Display Icons
Icon
Operations
a
An analogue channel.
c
A channel selected.
F
A channel set as a Favourites 1-5.
\
A locked channel.
◀
▶
English
❑❑ Using Favourite Channels (for Satellite TV)
for LED 5700 and above, for PDP TV
■■ Favourites
Shows all favourite channels.
●● Edit Favourites t: You can set the selected channels to desired
favourites channels.
NN The “F” symbol wil be displayed and the channel will be set as a favourite.
◀
▶
English
1. On the Channel screen, select a channel and press the TOOLS button.
NN If you want to add mulitple channels, use the Edit Mode menu in the top
right corner of the Channel screen.
2. Add or delete a channel in the favourite channels you want among 1, 2, 3, 4
and 5.
NN One or more groups can be selected.
NN The c mark appears to the left of the selected files.
◀
3. After you have changed the settings, the channel list for each group can be
viewed in favourite channels.
English
▶
❑❑ Memorising Channels (for Satellite TV)
for LED 5700 and above, for PDP TV
OO MENUm → Channel → ENTERE
■■ Antenna t
NN The option may differ depending on country.
Before your television can begin memorising the available channels, you must
specify the type of signal source that is connected to the TV.
◀
▶
English
■■ Country (Not available in some locations.)
NN The PIN input screen appears. Enter your 4 digit PIN number.
NN Select your country so that the TV can correctly auto-tune the broadcasting
channels.
●● Digital Channel: Change the country for digital channels.
●● Analogue Channel: Change the country for analogue channels.
◀
▶
English
■■ Auto Tuning
●● Auto Tuning
Scans for a channel automatically and stores in the TV.
NN Automatically allocated programme numbers may not correspond to actual or
desired programme numbers. If a channel is locked using the Channel Lock
function, the PIN input window appears.
–– Antenna Source: Select the antenna source to memorise. The option may
◀
differ depending on country.
–– Channel Type: Select the Channel type to memorise.
–– Satellite: Selects the satellite to scan. The option may differ depending on
country.
–– Scan Mode: Selects the scanning mode of the selected satellite.
English
▶
–– Automatic Ordering for Italy : Channels found will be automatically ordered
following a criterion established by all the main national and local televisions.
–– Others Ordering for Italy : If you select this menu you will find others
channels ordering directly organized from private national televisions.
NN Automatic Ordering and Others Ordering are available when antenna source
is set to Air.
NN The option may differ depending on country.
◀
▶
English
■■ Cable Search Option
(depending on the country)
Sets additional search options such as the frequency and symbol rate for a
cable network search.
–– Freq.Start / Freq.Stop: Set the start or stop frequency (differs in each
country)
–– Symbol Rate: Displays available symbol rates.
◀
–– Modulation: Displays available modulation values.
■■ Standby Auto Store (Off / On)
in standby mode.
for Italy :
Enables or disables auto-tune while TV is
■■ Wake-up Timer (1 hour later / 2 hours later / 00:00 / 02:00 / 12:00 /
14:00) for Italy : Selects the schedule timer to turn the TV on and scan channels
automatically.
English
▶
■■ Manual Tuning
Scans for a channel manually and stores in the TV.
NN If a channel is locked using the Channel Lock function, the PIN input window
appears.
●● Transponder: Selects the transponder using the up/down buttons.
●● Scan Mode: Selects either free or all channels to store.
●● Network Search (Disable / Enable): Network search using the up/down
◀
buttons.
●● Signal Quality: Display the current status of broadcasting signal.
NN Information on a satellite and its transponder is subject to change depending
on the broadcasting conditions.
NN When setting is completed, move to Search and press the ENTERE button.
Channel scan is started.
English
▶
■■ Satellite System
The PIN input screen appears. Enter your 4 digit PIN number. Satellite System
is available when Antenna is set to Satellite. Before running Auto Tuning, set
Satellite System. Then channel scan is run normally.
●● Satellite Selection: You can choose the satellites for this TV.
●● LNB Power (Off / On): Enables or disables the power supply for the LNB.
◀
▶
English
●● LNB Settings: Configures the outdoor equipment.
–– Satellite: Selects the satellite for receiving digital broadcasts.
–– Transponder: Selects a transponder from the list or adds a new
transponder.
–– DiSEqC Mode: Selects DiSEqC mode for the selected LNB.
–– Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.
–– Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency.
◀
–– Tone 22 kHz (Off / On / Auto): Selects the Tone 22 kHz depending on the
LNB type. For a universal LNB it should be Auto.
–– Signal Quality for LED TV : Display the current status of broadcasting signal.
English
▶
●● Positioner Settings: Configures the antenna positioner.
Positioner (On / Off): Enables or disables the positioned control.
Positioner Type (USALS / DiSEqC 1.2): Sets the positioned type between
DiSEqC 1.2 and USALS(Universal Satellite Automatic Location System).
–– My Longitude: Sets the longitude for my location.
–– My Latitude: Sets the latitude for my location.
–– Satellite Longitude Settings: Sets the longitude of user defined satellites.
◀
▶
English
User Mode: Sets the position of satellite antenna according to each satellite.
If you store the current position of satellite antenna according to a certain
satellite, when the signal of that satellite is needed, the satellite antenna can be
moved to pre-populated position.
–– Satellite: Selects the satellite to set the position for.
–– Transponder: Selects a transponder from the list for signal reception.
–– Moving Mode: Selects the movement mode between discrete and
◀
continuous movement.
–– Step Size: Adjusts the step size degrees for the antenna rotation. Step Size
is available when Moving Mode is set to Step.
English
▶
–– Go to Stored Position: Rotates the antenna to the stored satellite position.
–– Antenna Position: Adjusts and stores the antenna position for the selected
satellite.
–– Store Current Position: Stores current position as the selected positioner
limit.
–– Signal Quality: Display the current status of broadcasting signal.
◀
▶
English
Installer Mode: Sets limits to the scope of movement of satellite antenna or
reset the position. Generally, installation guide uses this function.
–– Limit Position (East / West): Selects the direction of the positioner Limit.
–– Antenna Position: Adjusts and stores the antenna position for the selected
satellite.
–– Store Current Position: Stores the current position as the selected
positioner Limit.
◀
–– Go to Zero: Moves the antenna to the reference position.
–– Reset Positioner Limit: Allows the antenna to rotate over the full arc.
●● Reset All Setting (Yes/No): All satellite settings will be reset to the initial values.
English
▶
❑❑ Other Features
OO MENUm → Channel → ENTERE
■■ Edit Channel Number
Use this to change channel number. When channel number is changed, channel
information is not updated automatically. Enables or disables Edit Channel
Number.
◀
NN This function may not be supported depending on the region.
■■ Fine Tune
(analogue channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done
automatically during the search and store operation. If the signal is weak or
distorted, fine tune the channel manually. Scroll to the left or right until the image is
clear.
English
▶
NN Settings are applied to the channel you’re currently watching.
NN Fine tuned channels that have been saved are marked with an asterisk “*” on
the right-hand side of the channel number in the channel banner.
NN To reset the fine-tuning, select Reset.
■■ Transfer Channel List
The PIN input screen appears. Enter your 4 digit PIN number. Imports or exports
the channel map. You should connect a USB storage to use this function.
◀
●● Import from USB: Import channel list from USB.
●● Export to USB: Export channel list to USB. this function is available when USB
is connected.
English
▶
Basic Features
❑❑ Changing the Preset Picture Mode
OO MENUm → Picture → Picture Mode → ENTERE
■■ Picture Mode t
Select your preferred picture type.
●● Dynamic: Suitable for a bright room.
●● Standard: Suitable for a normal environment.
◀
●● Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain.
●● Movie: Suitable for watching movies in a dark room.
●● Entertain: Suitable for watching movies and games.
NN It is only available when connecting a PC.
English
▶
❑❑ Adjusting Picture Settings
OO MENUm → Picture → ENTERE
■■ Backlight for LED TV / Cell Light
Colour / Tint (G/R)
for PDP TV
/ Contrast / Brightness / Sharpness /
Your television has several setting options for picture quality control.
NN In analogue TV, Ext., AV modes of the PAL system, the Tint (G/R) function is
not available.
◀
NN When connecting a PC, you can only make changes to Backlight for LED TV /
Cell Light
for PDP TV ,
Contrast and Brightness.
NN Settings can be adjusted and stored for each external device connected to the
TV.
English
▶
❑❑ Changing the Picture Size
OO MENUm → Picture → Screen Adjustment → ENTERE
■■ Screen Adjustment
●● Picture Size: Your cable box/satellite receiver may have its own set of screen
sizes as well. However, we highly recommend you use 16:9 mode most of the
time.
–– Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
◀
–– 16:9: Adjusts the picture size to 16:9 for DVDs or wide broadcasting.
–– Wide Zoom: Magnifies the picture size more than 4:3.
NN Adjusts the Position by using u, d buttons.
English
▶
–– Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
NN Adjusts the Position or Size by using u, d button.
–– 4:3: The default setting for a movie or normal broadcasting.
NN Do not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
–– Screen Fit: Displays the full image without any cut-off when HDMI (720p /
◀
1080i / 1080p), DTV (1080i, 1080p) or Component (1080i / 1080p) signals
are inputted.
English
▶
–– Smart View 1: Reduces the 16:9 picture by 50%. for LED TV
–– Smart View 2: Reduces the 16:9 picture by 25%. for LED TV
NN Smart View 1 is enabled only in HDMI mode.
NN Smart View 2 is enabled only in HDMI or DTV mode.
NN The picture size can vary depending on the input resolution when
content is played using Videos under Smart Hub.
◀
▶
English
NN NOTE
●● Depending on the input source, the picture size options may vary.
●● The available items may differ depending on the selected mode.
●● When connecting a PC, only 16:9 and 4:3 modes can be adjusted.
●● Settings can be adjusted and stored for each external device connected to an
input on the TV.
◀
▶
English
●● After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i /
1080p) mode, you may need to center the picture:
1. Press the d button to select Position.
2. Press the ENTERE button.
3. Press the u, d, l or r button to move the picture.
4. Press the ENTERE button.
◀
5.Select Close by pressing the d and u buttons sequentially. To reset the
picture position, press Reset.
English
▶
●● HD (High Definition): 16:9 - 1080i / 1080p (1920x1080), 720p (1280x720)
●● Settings can be adjusted and stored for each external device you have
connected to an input on the TV.
◀
Input Source
Picture Size
ATV, EXT, DTV
(480i, 480p, 576i, 576p, 720p)
Auto Wide, 16:9, Wide Zoom, Zoom, 4:3
DTV (1080i, 1080p)
Auto Wide, 16:9, Wide Zoom, Zoom, 4:3,
Screen Fit, Smart View 2 for LED TV
AV, Component (480i, 480p, 576i, 576p, 720p)
16:9, Wide Zoom, Zoom, 4:3
Component (1080i, 1080p)
16:9, Wide Zoom, Zoom, 4:3, Screen Fit
HDMI (720p, 1080i, 1080p)
16:9, Wide Zoom, Zoom, 4:3, Screen Fit,
Smart View 1 for LED TV , Smart View
2 for LED TV
PC
16:9, 4:3
English
▶
●● 4:3 Screen Size (16:9 / Wide Zoom / Zoom / 4:3): Available only when picture
size is set to Auto Wide. You can determine the desired picture size at the 4:3
WSS (Wide Screen Service) size or the original size. Each European country
requires different picture size.
NN Not available in PC, Component or HDMI mode.
◀
▶
English
❑❑ Changing the Picture Options
■■ Advanced Settings
OO MENUm → Picture → Advanced Settings → ENTERE
(Advanced Settings are available in Standard / Movie mode)
You can adjust the detailed setting for the screen
including colour and contrast.
◀
NN When connecting a PC, you can only make changes
to Gamma and White Balance.
Advanced Settings
Black Tone
Dynamic Contrast
Off
Medium
Shadow Detail
-2
Gamma
0
RGB Only Mode
Colour Space
Off
Native
White Balance
●● The displayed menu may differ
depending on the model.
English
▶
●● Black Tone (Off / Dark / Darker / Darkest): Select the black level to adjust the
screen depth.
●● Dynamic Contrast (Off / Low / Medium / High): Adjust the screen contrast.
●● Shadow Detail (-2~+2) for LED TV : Increase the brightness of dark images.
●● Gamma: Adjust the primary colour intensity.
●● Expert Pattern (Off / Pattern1 / Pattern2) for PDP TV : By running the Expert
◀
Pattern function, the picture can be calibrated without a generator or filter. If
the OSD menu disappears or a menu other than the Picture menu is opened,
the calibration is saved and the Expert Pattern window disappears.
NN While the Expert Pattern is running, sound is not outputted.
NN Only enabled on DTV, Component / HDMI models.
English
▶
●● RGB Only Mode (Off / Red / Green / Blue): Displays the Red, Green and
Blue colour for making fine adjustments to the hue and saturation.
●● Colour Space (Auto / Native / Custom): Adjust the range of colours available
to create the image.
NN The Custom option is available only for PDP TV.
●● White Balance: Adjust the colour temperature for a more natural picture.
◀
R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue)
darkness.
R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Reset: Resets the White Balance to its default settings.
English
▶
●● 10p White Balance (Off / On) for PDP TV : Controls the white balance in 10 point
interval by adjusting the red, green, and blue brightness.
NN Available when the picture mode is set to Movie and when the external
input is set to all input.
NN Some external devices may not support this function.
Interval: Select interval to adjust.
Red: Adjust the red level.
◀
Green: Adjust the green level.
▶
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default settings.
English
●● Flesh Tone: Emphasize pink “Flesh Tone.”
●● Edge Enhancement (Off / On): Emphasize object boundaries.
●● Motion Lighting (Off / On): Reduce power consumption by brightness control.
NN Motion Lighting is available in Standard / Movie mode.
NN Not supported in 3D mode.
NN When changing a setting value of Contrast, Motion Lightning will be set to
Off.
◀
▶
English
●● xvYCC (Off / On) for PDP TV : Setting the xvYCC mode on increases detail and
colour space when watching movies from an external device (e.g. DVD player)
connected to the HDMI or Component IN jacks.
NN Available when the picture mode is set to Movie and when the external
input is set to HDMI or Component.
NN Some external devices may not support this function.
●● LED Motion Plus (Off / On) for LED TV : Removes drag from fast scenes with a
◀
lot of movement to provide a clear picture.
English
▶
■■ Picture Options
OO MENUm → Picture → Picture Options → ENTERE
NN When connecting a PC, you can only make changes to the Colour Tone.
●● Colour Tone (Cool / Standard / Warm1 / Warm2)
NN Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
NN Settings can be adjusted and stored for each
◀
external device connected to an input on the TV.
Picture Options
Colour Tone Standard
Digital Noise Filter
Auto
MPEG Noise Filter
Auto
HDMI Black Level
Normal
Film Mode
Off
▶
●● The displayed image may differ
depending on the model.
English
●● Digital Noise Filter (Off / Low / Medium / High / Auto / Auto Visualisation):
When the broadcast signal is weak, some static and ghosting may appear.
Select one of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels, displays the intensity
of the current signal and defines the screen noise filter.
NN Only available for analogue channels.
◀
▶
English
●● MPEG Noise Filter (Off / Low / Medium / High / Auto): Reduces MPEG noise
to provide improved picture quality.
●● HDMI Black Level (Low / Normal): Selects the black level on the screen to
adjust the screen depth.
NN Available only in HDMI mode (RGB signals).
●● Film Mode (Off / Auto1 / Auto2 / Cinema Smooth): Sets the TV to
◀
automatically sense and process film signals from all sources and adjust the
picture for optimum quality.
NN Available in AV, COMPONENT (480i / 1080i) and HDMI (1080i).
NN Cinema Smooth is available only for PDP TV.
■■ Reset Picture (Yes / No)
Resets your current picture mode to its default settings.
English
▶
❑❑ Setting up the TV with Your PC
Set the input source to PC.
■■ Auto Adjustment t
OO MENUm → Picture → Auto Adjustment → ENTERE
Adjust frequency values/positions and fine tune the settings automatically.
NN Not available when connecting with an HDMI to DVI cable.
◀
▶
English
■■ PC Screen Adjustment
OO MENUm → Picture → Screen Adjustment → PC Screen Adjustment →
ENTERE
●● Coarse / Fine: Removes or reduces picture noise. If the noise is not removed
by Fine-tuning alone, then adjust the frequency as best as possible (Coarse)
and Fine-tune again. After the noise has been reduced, readjust the picture so
that it is aligned to the centre of screen.
◀
●● Position: Adjust the PC screen position with direction button (u / d / l / r).
●● Image Reset: Resets the image to default settings.
English
▶
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
Depending on the version of Windows and the video card, the actual screens on your
PC may differ in which case the same basic set-up information will almost always be
applied. (If not, contact your computer manufacturer or Samsung Dealer.)
1. Click on “Control Panel” on the Windows start menu.
◀
2. Click on “Appearance and Themes” in the “Control Panel” window and a display
dialog-box will appear.
3. Click on “Display” and a display dialog box will appear.
English
▶
4. Navigate to the “Settings” tab on the display dialog-box.
●● The correct size setting (resolution) [Optimum: 1920 X 1080 pixels]
●● If a vertical-frequency option exists on your display settings dialog box, the
correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog
box.
◀
▶
English
❑❑ Changing the Preset Sound Mode
OO MENUm → Sound → Sound Mode → ENTERE
■■ Sound Mode t
●● Standard: Selects the normal sound mode.
●● Music: Emphasizes music over voices.
●● Movie: Provides the best sound for movies.
◀
●● Clear Voice: Emphasizes voices over other sounds.
●● Amplify: Increase the intensity of high-frequency sound to allow a better
listening experience for the hearing impaired.
NN If Speaker Select is set to External Speaker, Sound Mode is disabled.
English
▶
❑❑ Adjusting Sound Settings
OO MENUm → Sound → Sound Effect → ENTERE
■■ Sound Effect
●● SRS TruSurround HD (Off / On) t
(standard sound mode only)
◀
This function provides a virtual 5.1 channel surround sound experience through
a pair of speakers using HRTF (Head Related Transfer Function) technology.
English
▶
●● SRS TruDialog (Off / On)
(standard sound mode only)
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialog can be heard more clearly.
◀
▶
English
●● Equalizer
Adjusts the sound mode (standard sound mode only).
–– Balance L/R: Adjusts the balance between the right and left speaker.
–– 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts
the level of specific bandwidth frequencies.
–– Reset: Resets the equalizer to its default settings.
◀
▶
English
■■ Broadcast Audio Options
●● Audio Language
(digital channels only)
Change the default value for audio languages.
NN The available language may differ depending on the broadcast.
◀
▶
English
●● Audio Format
(digital channels only)
When sound is emitted from both the main speaker and the audio receiver,
a sound echo may occur due to the decoding speed difference between the
main speaker and the audio receiver. In this case, use the TV Speaker function.
NN Audio Format option may differ depending on the broadcast. 5.1ch Dolby
◀
digital sound is only available when connecting an external speaker through
an optical cable.
English
▶
●● Audio Description
(not available in all locations) (digital channels only)
This function handles the Audio Stream for the AD (Audio Description) which is
sent along with the Main audio from the broadcaster.
NN Audio Description (Off / On): Turn the audio description function on or off.
NN Volume: Adjust the audio description volume.
◀
▶
English
■■ Additional Settings
(digital channels only)
●● DTV Audio Level (MPEG / HE-AAC): This function allows you to reduce the
disparity of a voice signal (which is one of the signals received during a digital
TV broadcast) to a desired level.
NN According to the type of broadcast signal, MPEG / HE-AAC can be
adjusted between -10dB and 0dB.
◀
NN To increase or decrease the volume, adjust between the range 0 and -10
respectively.
English
▶
●● SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital
sound, reducing interference going to speakers and various digital devices such
as a DVD player.
Audio Format: During the reception of a digital TV broadcast, you can select
the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.
◀
Audio Delay: Correct audio-video sync problems, when watching TV or video,
and when listening to digital audio output using an external device such as an
AV receiver (0ms ~ 250ms).
English
▶
●● Dolby Digital Comp (Line / RF): This function minimizes signal disparity
between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC,
ATV Sound).
NN Select Line to obtain dynamic sound, and RF to reduce the difference
between loud and soft sounds at night time.
Line: Set the output level for signals greater or less than -31dB (reference) to
either -20dB or -31dB.
◀
RF: Set the output level for signals greater or less than -20dB (reference) to
either -10dB or -20dB.
English
▶
■■ Speaker Settings
●● Speaker Select (External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to External
Speaker.
NN When Speaker Select is set to External Speaker, the volume and MUTE
buttons will not operate and the sound settings will be limited.
◀
NN When Speaker Select is set to External Speaker.
●● TV Speaker: Off, External Speaker: On
NN When Speaker Select is set to TV Speaker.
●● TV Speaker: On, External Speaker: On
NN If there is no video signal, both speakers will be mute.
English
▶
●● Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night: This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
NN When you control the volume of the external devices (Set-topbox or DivX
Player) connected to the TV, set to off the Auto Volume mode. Because you
can’t feel the effect of the volume control by the Auto Volume mode.
◀ ■■ Reset Sound (Yes / No)
▶
Reset all sound settings to the factory defaults.
English
❑❑ Selecting the Sound Mode t
When you set to Dual f-g, the current sound mode is displayed on the screen.
Mono
MONO
Stereo
STEREO ↔ MONO
Dual
DUAL f ↔ DUAL g
Mono
MONO
Stereo
MONO ↔ STEREO
Dual
MONO ↔ DUAL f
DUAL g
↑
◀
NICAM Stereo
Dual 1 / 2
←
A2 Stereo
Audio Type
Dual 1 / 2
Automatic change
DUAL f
Automatic change
DUAL f
If the stereo signal is weak and an automatic switching, occurs, then switch to the
mono.
NN Only activated in stereo sound signal.
NN Only available when the Source is set to TV.
English
▶
Preference
❑❑ Connecting to a Wired Network
You can attach your TV to your LAN using cable in three ways:
●● You can attach your TV to your LAN by connecting the LAN port on the back of
your TV to an external modem using a LAN cable. See the diagram below.
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
TV Rear Panel
◀
▶
Modem Cable
LAN Cable
English
●● You can attach your TV to your LAN by connecting the LAN port on the back
of your TV to a IP Sharer which is connected to an external modem. Use LAN
cable for the connection. See the diagram below.
The Modem Port
on the Wall
TV Rear Panel
External Modem
IP Sharer
(ADSL / VDSL / Cable TV) (having DHCP server)
◀
▶
Modem Cable
LAN Cable
English
LAN Cable
●● Depending on how your network is configured, you may be able to attach your
TV to your LAN by connecting the LAN port on the back of your TV directly to
a network wall outlet using a LAN cable. See the diagram below. Note that the
wall outlet is attached to a modem or router elsewhere in your house.
The LAN Port on the Wall
TV Rear Panel
◀
▶
LAN Cable
English
●● If you have a Dynamic Network, you should use an ADSL modem or router
that supports Dynamic Host Configuration Protocol (DHCP). Modems and
routers that support DHCP automatically provide the IP address, subnet mask,
gateway, and DNS values your TV needs to access the Internet so you do not
have to enter them manually. Most home networks are Dynamic Networks.
◀
Some networks require a Static IP address. If your network requires a Static
IP address, you must enter the IP address, subnet mask, gateway, and DNS
values manually on your TV’s Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway, and DNS values,
contact your Internet Service Provider (ISP). If you have a Windows computer,
you can also get these values through your computer.
NN You can use ADSL modems that support DHCP if your network requires a
Static IP address. ADSL modems that support DHCP also let you use Static
IP addresses.
English
▶
■■ Network Settings
OO MENUm → Network → Network Settings → ENTERE
Set the network connection to use various Internet services such as Smart Hub,
AllShare and perform software upgrade.
■■ Network Status
OO MENUm → Network → Network Status → ENTERE
◀
You can check the current network and Internet status.
■■ AllShare Settings
OO MENUm → Network → AllShare Settings → ENTERE
Selects whether to use media functions on the network.
English
▶
■■ Network Setup (Auto)
Use the Automatic Network Setup when connecting your TV to a network that
supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
How to set up automatically
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
◀
2. Select the Wired.
Network Setting
Select a network connection type.
Wired
Wireless (general)
WPS(PBC)
3. The network test screen appears, and
network setting is done.
English
One Foot Connection
Previous
Connect to the network using a
LAN cable. Please make sure that
Next
the LAN cable is connected.
Cancel
▶
NN If it fails to set automatically, check the
connection of LAN port.
Network Setting
Wired network and Internet connection completed.
NN If you cannot find network connection
values or if you want to set connection
manually, set it to Manual. Refer to following
“How to set up manually”.
MAC Address
00:12:fb:2b:56:4d
IP Address
192.168.11.4
Subnet Mask
255.255.255.0
Gareway192.168.11.1
SEC_LinkShare
DNS Server
192.168.11.1
Retry
IP Setting
Internet is connected successfully.
If you have a problem with using Internet Service, contact your Internet service
OK
provider.
NN It is not supported when the network speed is under 10 Mbps.
◀
▶
English
■■ Network Settings (Manual)
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these
steps:
1. Right click the Network icon on the bottom right of the screen.
◀
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The Network connection values
are displayed.
English
▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 2 in the “How to set up automatically” procedure.
2. Select the IP Setting on network test screen.
3. Set IP Mode to Manual.
IP Settings
IP Mode
4. Press the d button on your remote to go to the
IP Address.
◀
Manual
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway
0.0.0.0
DNS Mode
Manual
DNS Server
0.0.0.0
OK
English
▶
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the
number buttons on your remote to enter numbers and the arrow buttons to move
from one entry field to another.
6. When done, select the OK.
7. The network test screen appears, and network setting is done.
◀
▶
English
❑❑ Connecting to a Wireless Network
for LED TV
To connect your TV to your network wireless, you need a wireless router or
modem and a Samsung Wireless LAN adapter (WIS09ABGN, WIS09ABGN2,
WIS10ABGN), which you connect to your TV’s back or side panel USB port. See
the illustration below.
The LAN Port on the Wall
Wireless IP sharer
(router having DHCP server)
TV Rear Panel
◀
▶
Samsung
Wireless
LAN adapter
LAN Cable
English
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers
and Ecommerce sites. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/
b/g and n communication protocols. Samsung recommends using IEEE 802.11n.
When you play video over a network connection, the video may not be played
smoothly.
NN NOTE
●● You must use the “Samsung Wireless LAN adapter (WIS09ABGN,
WIS09ABGN2, WIS10ABGN) to use a wireless network.
◀
●● Samsung Wireless LAN adapter and The USB extension Cable are sold
separately and are offered by select retailers, Ecommerce sites and
Samsungparts.com.
English
▶
●● To use a wireless network, your TV must be connected to a wireless IP sharer
(either a router or a modem). If the wireless IP sharer supports DHCP, your TV
can use a DHCP or static IP address to connect to the wireless network.
●● Select a channel for the wireless IP sharer that is not currently being used. If the
channel set for the wireless IP sharer is currently being used by another device
nearby, this will result in interference and communication failure.
●● If you apply a security system other than the systems listed below, it will not
work with the TV.
◀
▶
English
●● If Pure High-throughput (Greenfield) 802.11n mode is selected and the
Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your
Wireless router, Samsung TVs will not support a connection in compliance with
new Wi-Fi certification specifications.
●● If your wireless router supports WPS (Wi-Fi Protected Setup), you can
connect to the network via PBC (Push Button Configuration) or PIN (Personal
Identification Number). WPS will automatically configure the SSID and WPA key
in either mode.
◀
●● If your router, modem, or device is not certified, it may not connect to the TV
via the “Samsung Wireless LAN adapter.”
●● Turn off the TV when you connect the Samsung wireless LAN adapter and then
turn on the TV.
English
▶
●● Connection Methods: You can setup the wireless network connection on five
ways.
–– Auto Setup (Using the Auto Network Search function)
–– Manual Setup
–– WPS (PBC)
–– Ad hoc
–– One Foot Connection
◀
▶
–– Plug & Access
●● The Samsung Wireless LAN adapter may not be recognized when using a
connection via a USB hub or via a USB extension cable other than the cable
supplied.
English
Notice
The picture may appear corrupted or have static for some channels when the TV
is connected to the Samsung Wireless LAN adapter. In such a case, establish a
connection using one of the following methods or connect the Samsung Wireless LAN
adapter using a USB cable in a place that is not affected by radio interference.
●● Method 1 : Connect using the USB right
angle adapter
◀
To connect the Samsung Wireless LAN
adapter using the USB right angle adapter,
follow these steps:
1. Connect the USB right angle adapter to
the Samsung Wireless LAN adapter.
▶
●● The displayed menu may differ depending on the
model.
2. Connect the other end of the right angle adapter to the USB port.
English
●● Method 2 : Connect via an extension cable
To reconnect the Samsung Wireless LAN
adapter using the extension cable, follow
these steps:
1. Connect the extension cable to the USB
port.
◀
2. Connect the extension cable and
Samsung Wireless LAN adapter.
●● The displayed menu may differ depending on the
model.
3. Attach the Samsung Wireless LAN adapter to the back of the TV near the top,
using double-sided adhesive tape.
NN The Samsung Wireless LAN Adapter should be installed in an interface free
area in order to avoid interference between the adapter and tuner.
English
▶
❑❑ Connecting to a Wireless Network
for PDP TV
To connect your TV to your network wireless, you can use a wireless network to
use the Samsung Wireless LAN adapter where is built-in the TV.
The LAN Port on the Wall
Wireless IP sharer
(router having DHCP server)
◀
▶
LAN Cable
English
Samsung Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication
protocols. Samsung recommends using IEEE 802.11n. When you play video over a
network connection, the video may not be played smoothly.
NN NOTE
●● To use a wireless network, your TV must be connected to a wireless IP sharer
(either a router or a modem). If the wireless IP sharer supports DHCP, your TV
can use a DHCP or static IP address to connect to the wireless network.
◀
●● Select a channel for the wireless IP sharer that is not currently being used. If the
channel set for the wireless IP sharer is currently being used by another device
nearby, this will result in interference and communication failure.
●● If you apply a security system other than the systems listed below, it will not
work with the TV.
English
▶
●● If Pure High-throughput (Greenfield) 802.11n mode is selected and the
Encryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) for your
Wireless router, Samsung TVs will not support a connection in compliance with
new Wi-Fi certification specifications.
●● If your wireless router supports WPS (Wi-Fi Protected Setup), you can
connect to the network via PBC (Push Button Configuration) or PIN (Personal
Identification Number). WPS will automatically configure the SSID and WPA key
in either mode.
◀
●● If your router, modem, or device is not certified, it may not connect to the TV.
●● Ensure the TV is turned on before you connect the Samsung Wireless LAN
adapter.
English
▶
●● Connection Methods: You can setup the wireless network connection on five
ways.
–– Auto Setup (Using the Auto Network Search function)
–– Manual Setup
–– WPS (PBC)
–– Ad hoc
–– One Foot Connection
◀
▶
–– Plug & Access
English
❑❑ Setting the network
■■ Network Setup (Auto)
◀
Most wireless networks have an optional security system that requires devices that
access the network to transmit an encrypted security code called an Access or
Security Key. The Security Key is based on a Pass Phrase, typically a word or a
series of letters and numbers of a specified length you were asked to enter when
you set up security for your wireless network. If you use this method of setting up
the network connection, and have a Security Key for your wireless network, you
will have to enter the Pass Phrase during the setup process.
English
▶
How to set up automatically
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
◀
Network Setting
Select a network connection type.
Wired
2. Select the Wireless.
Wireless (general)
3.The Network function searches for available
wireless networks. When done, it displays a
list of the available networks.
One Foot Connection
WPS(PBC)
Previous
Set up a wireless network by
selecting your access point. You
may need to enter a security
key depending on the settings
Next
Cancel
of the access point.
●● The displayed image may differ depending on the
model.
4. In the list of networks, press the u or d button to select a network, and then
press the ENTERE button.
NN If the wireless router is set to Hidden (Invisible), you have to select Add
Network and enter the correct Network Name (SSID) and Security key to
establish the connection.
English
▶
5. If the Security screen pop-up appears, go to step 6. If you select the wireless
router which does not have security, go to step 7.
6. If the wireless router has security, enter the
Security key(Security or PIN), then select
Next.
NN When you enter the Security key(Security
◀
or PIN), use u / d / l / r buttons
on your remote to select number/
characters.
Network Setting
Enter Access Point Name(SSID) to connect.
a
b
c
d
e
f
1
2
3
g
h
i
j
k
l
4
5
6
m
n
o
p
q
r
7
8
9
s
t
u
v
w
x
y
z
0
a/A
Delete
Previous
Next
Cancel
Space
●● The displayed image may differ depending on the
model.
NN You should be able to find the Pass Phrase on one of the set up screens
you used to set up your router or modem.
English
▶
7. The network connection screen appears, and network setting is done.
NN If it fails to set Security key(Security or PIN), select Reset or IP Settings.
NN If you want to set connection manually, select the IP Settings. Refer to
following “How to set up manually”.
◀
▶
English
■■ Network Setup (Manual)
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
Getting the Network Connection Values
To get the Network connection values on most Windows computers, follow these
steps:
1. Right click the Network icon on the bottom right of the screen.
◀
2. In the pop-up menu that appears, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support Tab, click the Details button. The Network connection values
are displayed.
English
▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1. Follow Steps 1 through 7 in the “How to set
up automatically” procedure.
2. Select the IP Settings on network test
screen.
3. Set IP Mode to Manual.
◀
IP Settings
IP Mode
Manual
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway
0.0.0.0
DNS Mode
4. Press the d button on your remote to go to
the first entry field.
English
Manual
DNS Server
0.0.0.0
OK
▶
5. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use
the number buttons on your remote to enter numbers and the arrow buttons to
move from one entry field to another.
6. When done, select the OK.
7. The network connection screen appears, and network setting is done.
◀
▶
English
■■ Network Setup (WPS(PBC))
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
1. Go to Network Settings screen. To enter it,
follow the directions of Network Settings.
2. Select the WPS(PBC).
◀
Network Setting
Select a network connection type.
Wired
Wireless (general)
WPS(PBC)
3. Press the WPS(PBC) button on your router
within 2 minutes. Your TV automatically
acquires all the network setting values it
needs and connects to your network.
4. The network test screen appears, and
network setting is done.
English
One Foot Connection
Previous
Connect to the Access Point
easily by pressing the WPS(PBC)
Next
button. Choose if your Access
Point supports push button
Cancel
Configuration(PBC).
●● The displayed menu may differ depending on the
model.
▶
■■ Ad Hoc Network Setup
You can connect to a mobile device supporting Ad-hoc connections without a wireless
router or AP through the TV. When connected to a mobile device, you can use files on
the device or connect to the Internet using the AllShare™ or Multimedia function.
How to set up using Ad hoc
1. Go to Network Settings screen. (MENUm → Network → Network Settings →
ENTERE).
◀ 2.Select Wireless (General), and press ENTERE, then press ENTERE again.
English
▶
3.Select Ad hoc. The message “Ad hoc service supports a direct connection
with Wi-Fi compatible devices like a cell phone or PC. Other network
services may be limited. Do you want to change the network connection?” is
displayed.
4.Select OK, and press ENTERE. The TV searches for the mobile device.
5. When the TV finishes searching for your mobile device, input the generated
Network Name (SSID) and Security Key into the device you want to connect and
then connect to the network.
◀
NN If network does not operate normally, check the Network Name (SSID) and
Security key again. An incorrect Security key may cause a malfunction.
NN If a device is connected once, it is displayed in the Network Setting list. When
you connect to it again, you can find it in the List.
English
▶
■■ Network Settings (One Foot Connection)
The One Foot Connection make you easy to connect samsung TV and samsung
wireless router by placing samsung wireless router within 1 foot (25cm) from
samsung TV. If your wireless router does not support One Foot Connection, you
must connect using one of the other methods.
NN You can check for equipment that supports One Foot Connection on
www.samsung.com.
◀
▶
English
How to set up using One Foot Connection
Turn on the power of wireless router and TV.
1. Go to Network Settings screen. To
enter it, follow the directions of Network
Settings.
2. Select the One Foot Connection.
Network Setting
Select a network connection type.
Wired
Wireless (general)
WPS(PBC)
Connect to the wireless network
automatically if your access point
supports One Foot Connection.
One Foot Connection
◀
English
Next
Select this connection type after
placing the access point within 10
3. Place the wireless router in parallel with the
Samsung Wireless LAN adapter giving a
gap no larger than 25cm.
Previous
Cancel
inches (25 cm) of your TV.
●● The displayed image may differ depending on the
model.
▶
NN If One Foot Connection does not connect your TV to your Router, a pop-
up window appears on the screen notifying you of the failure. If you want to
try using One Foot Connection again, reset the wireless router, disconnect
the Samsung Wireless LAN adapter and then try again from Step 1. You can
also choose one of the other connection setup methods.
4. Wait until the connection is automatically established.
5. The network connection screen appears, and network setting is done.
◀
6. Place the wireless router in a desired location.
NN If the wireless router settings change or you install a new AP, you must
perform the One Foot Connection procedure again, beginning from Step 1.
English
▶
■■ Network Setup (Plug & Access)
Plug & Access function make you easy to connect samsung TV and samsung
wireless router by using USB memory stick. If your wireless router does not
support Plug & Access, you must connect using one of the other methods.
NN You can check for equipment that supports Plug & Access on www.samsung.
com.
◀
▶
English
How to set up using Plug & Access function
Turn on the power of wireless router and TV.
1. Insert USB memory stick into our Samsung wireless router and checking wireless
router LED status (Blinking → On).
2. Then take USB memory out and insert it into Samsung TV.
3. Wait until the connection is automatically established.
NN If Plug & Access does not connect your TV to your wireless router, a pop-up
◀
window appears on the screen notifying you of the failure. If you want to try
using Plug & Access a gain, reset the wireless router, disconnect the Samsung
Wireless LAN adapter and then try again from Step 1. You can also choose one
of the other connection setup methods.
English
▶
4. The network connection screen appears, and network setting is done.
5. Place the wireless router in a desired location.
NN If the wireless router settings change or you install a new wireless router, you
must perform the Plug & Access procedure again, beginning from Step 1.
◀
▶
English
Priority QOS
Samsung wireless Router is optimized HD AV streaming for Samsung DTV
This is our product’s distinctive function.
Samsung wireless Router can be connected with many devices, such as laptop,
mobile phone, BD player etc.
◀
In case of connecting Samsung TV to Samsung wireless Router while other
devices are connected, Samsung wireless Router will give Samsung TV a priority
connection than other devices.
This function ensures the best streaming contents and throughput speed.
●● Make your TV faster by giving priority bandwidth to your TV (on/off optional).
●● By giving priority to Samsung TVs, enjoy HD content without buffering.
●● Connection speed may vary based on the network environment.
English
▶
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet because your ISP has permanently registered the MAC address (a unique identifying number) of your PC or modem, which it then
authenticates each time you connect to the Internet as a way of preventing unauthorized
access. As your TV has a different MAC address, your ISP can not authenticate its MAC address, and your TV can not connect.
To resolve this problem, ask your ISP about the procedures required to connect devices
other than a PC (such as your TV) to the Internet.
◀
If your Internet service provider requires an ID or password to connect to the Internet, your
TV may not be able to connect to the Internet. If this is the case, you must enter your ID or
password when connecting to the Internet.
The internet connection may fail because of a firewall problem. If this is the case, contact
your Internet service provider.
If you cannot connect to the Internet even after you have followed the procedures of your
Internet service provider.
English
▶
❑❑ Setting the Time
OO MENUm → System → Time → ENTERE
■■ Time
●● Clock: Setting the clock is for using various timer features of the TV.
OO The current time will appear every time you press the INFO button.
NN If you disconnect the power cord, you have to set the clock again.
◀
–– Clock Mode (Auto / Manual)
Auto: Set the current time automatically using the time from a digital
channel.
NN The antenna must be connected in order to set the time automatically.
English
▶
Manual: Set the current time manually.
NN Depending on the broadcast station and signal, the auto time set up
may not be correct. In this case, set the time manually.
–– Clock Set: Set the Date and Time.
NN Available only when Clock Mode is set to Manual.
NN You can set the Date and Time directly by pressing the number buttons
on the remote control.
◀
–– Time Zone (Auto / Manual): Select your time zone.
NN Available only when the Clock Mode is set to Auto.
English
▶
–– GMT (GMT -3:00 ~ GMT +12:00): Selects your time zone.
NN Available only when the Time Zone is set to Manual.
–– DST (Daylight Saving Time) (Off / On) for LED TV : Switches the Daylight
Saving Time function on or off.
NN Available only when the Time Zone is set to Manual.
◀
▶
English
Using the Sleep Timer
OO MENUm → System → Time → Sleep Timer → ENTERE
●● Sleep Timer t: Automatically shuts off the TV after a preset period of
time. (30, 60, 90, 120, 150 and 180 minutes).
NN To cancel Sleep Timer, select Off.
◀
▶
English
Setting the On / Off Timer
O MENUm → System → Time → ENTERE
● On Timer 1 / On Timer 2 / On Timer 3:
Three different on timer settings can be
made. You must set the clock first.
◀
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual
to set at your convenience. If you select
Manual, you can set up the day you want to
activate the timer.
On Timer 1
Setup
Sun
Mon
Tur
Wed
Time
Thu
Fri
Sat
12:00
Volume
20
Source
TV
Antenna
DTV
Channel
3
N The c mark indicates the day you’ve selected.
English
Off
Close
▶
Time: Set the hour and minute.
Volume: Set the desired volume level.
Source: Select TV or USB content to be played when the TV is turned on
automatically. (USB can be selected only when a USB device is connected to
the TV)
Antenna (when the Source is set to TV): Select the desired Antenna.
Channel (when the Source is set to TV): Select the desired channel.
◀
Music / Photo (when the Source is set to USB): Select a folder in the
USB device containing music files to be played when the TV is turned on
automatically.
English
▶
NN NOTE
●● If there is no music file on the USB device or the folder containing a
music file is not selected, the Timer function does not operate correctly.
●● When there is only one photo file in the USB, the Slide Show will not
play.
●● If a folder name is too long, the folder cannot be selected.
◀
▶
English
●● Each USB you use is assigned its own folder. When using more than one
of the same type of USB, make sure the folders assigned to each USB
have different names.
●● It is recommended that you use a USB memory stick and a multi card
◀
reader when using On Timer. The On Timer function may not work
with USB devices with a built-in battery, MP3 players, or PMPs made
by some manufacturers because these devices take a long time to be
recognized.
English
▶
● Off Timer 1 / Off Timer 2 / Off Timer 3:
Three different off timer settings can be
made. You must set the clock first.
Setup: Select Off, Once, Everyday,
Mon~Fri, Mon~Sat, Sat~Sun or Manual
to set at your convenience. If you select
Manual, you can set up the day you want to
activate the timer.
◀
Off Timer 1
Setup
Sun
English
Sun
Tur
Wed
Time
N The c mark indicates the day you’ve selected.
Time: Set the hour and minute.
Off
Thu
Fri
Sat
12:00
Close
▶
❑❑ Locking Programme
OO MENUm → System → Security → ENTERE
■■ Security
NN The PIN input screen appears before the setup screen.
NN Enter your 4-digit PIN. Change the PIN using the Change PIN option.
●● Channel Lock (Off / On): Lock channels in channel list, to prevent unauthorized
◀
users, such as children, from watching unsuitable program.
NN Available only when the Source is set to TV.
English
▶
●● Program Rating Lock: Prevent unauthorized users, such as children, from
watching unsuitable Program with a userdefined 4-digit PIN code. If selected
channel is locked,the “\” symbol will be displayed.
NN The items of Program Rating Lock differs depending on the country.
●● Change PIN: Change your personal ID number required to set up the TV
●● Adult genre enabling (Off / On): You can adjust the Adult genre enabling.
NN The Adult genre enabling is available for Freesat antenna only.
◀
▶
English
How to watch a restricted channel
If the TV is tuned to a restricted channel, the Program Rating Lock will block it.
The screen will go blank and the following message will appear:
This channel is blocked by Program Rating Lock. Please enter the PIN to
unblock.
◀
▶
English
❑❑ Economical Solutions
■■ Eco Solution
OO MENUm → System → Eco Solution → ENTERE
●● Energy Saving (Off / Low / Medium / High / Picture Off): This adjusts the
brightness of the TV in order to reduce power consumption. If you select
Picture Off, the screen is turned off, but the sound remains on. Press any
button except volume button to turn on the screen.
◀
▶
English
●● Eco Sensor (Off / On): To enhance your power savings; the picture settings will
automatically adapt to the light in the room.
NN If you adjust the Backlight for LED TV / Cell Light for PDP TV , the Eco Sensor
will be set to Off.
/ Min Cell Light for PDP TV : When Eco sensor is On,
the minimum screen brightness can be adjusted manually.
Min Backlight
for LED TV
NN If Eco Sensor is On, the display brightness may change (become slightly
◀
darker or brighter) depending on the surrounding light intensity.
English
▶
●● No-Signal Power Off (Off / 15 min / 30 min / 60 min): To avoid unnecessary
energy consumption, set how long you want the TV to remain on if it’s not
receiving a signal.
NN Disabled when the PC is in power saving mode.
●● Auto Power Off (Off / On): The TV will be automatically turned off after 4 hours
of being left idle to prevent overheating.
◀
■■ Auto Protection Time (2 hours / 4 hours / 8 hours / 10 hours / Off)
for LED TV
If the screen remains idle with a still image for a certain period of time defined by
the user, the screen saver is activated to prevent the formation of ghost images on
the screen.
English
▶
■■ Screen Burn Protection
for PDP TV
To reduce the possibility of screen burn, this unit is equipped with screen burn
prevention technology. The Time setting allows you to programme the time
between movement of the picture in minutes.
●● Pixel Shift (Off / On): Using this function, you can minutely move pixels on the
PDP in horizontal or vertical direction to minimize after image on the screen.
NN Optimum condition for pixel shift
◀
Item
TV / AV / Component / HDMI / PC
Horizontal
0~4
4
Vertical
0~4
4
Time (minute)
1~4 min
4 min
English
▶
NN The Pixel Shift value may differ depending on the monitor size (inches) and
mode.
NN This function is not available in the Screen Fit mode.
●● Auto Protection Time (Off / 10 min / 20 min / 40 min / 1 hour): If the screen
remains idle with a still image for a certain period of time defined by the user,
the screen saver is activated to prevent the formation of ghost images on the
screen.
◀
●● Scrolling: This function removes after-images on the screen by moving all
the pixels on the PDP according to a pattern. Use this function when there
are remaining after images or symbols on the screen, especially when you
displayed a still image on the screen for a long time.
English
▶
NN The after-image removal function has to be executed for a long time
(approximately 1 hour) to effectively remove after-images on the screen. If the
after-image is not removed after performing the function, repeat the function
again.
NN Press any key on the remote control to cancel this feature.
Side Grey (Light / Dark): When you watch TV with the screen ratio set to 4:3,
the screen is prevented from any damage by adjusting the white balance on both
extreme left and right sides.
◀
▶
English
❑❑ Other Features
OO MENUm → System → ENTERE
■■ Language
●● Menu Language: Set the menu language.
●● Teletext Language: Set a desired language for teletext.
NN English is the default in cases where the selected language is unavailable in
◀
the broadcast.
●● Preference (Primary Audio Language / Secondary Audio Language /
Primary Subtitle Language / Secondary Subtitle Language / Primary
Teletext Language / Secondary Teletext Language): Select a language,
which will be the default language when a channel is selected.
English
▶
■■ Subtitle
Use this menu to set the Subtitle mode.
●● Subtitle (Off / On): Switches subtitles on or off.
●● Mode (Normal / Hearing Impaired): Sets the subtitle mode.
●● Subtitle Language: Sets the subtitle language.
NN If the programme you are watching does not support the Hearing Impaired
◀
function, Normal automatically activates even if the Hearing Impaired
mode is selected.
NN English is the default in cases where the selected language is unavailable in
the broadcast.
English
▶
■■ Digital Text (Disable / Enable)
(UK only)
If the programme broadcasts with digital text, this feature is enabled.
◀
MHEG (Multimedia and Hypermedia Information Coding Experts Group): An
International standard for data encoding systems used in multimedia and
hypermedia. This is at a higher level than the MPEG system which includes
datalinking hypermedia such as still images, character service, animation, graphic
and video files as well as multimedia data. MHEG is user runtime interaction
technology and is being applied to various fields including VOD (Video-OnDemand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, teleconferencing,digital libraries and network games.
English
▶
■■ General
●● Game Mode (Off / On): When connecting to a game console such as
PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game mode.
NN NOTE
●● Precautions and limitations for game mode
–– To disconnect the game console and connect another external device,
◀
set Game Mode to Off in the setup menu.
–– If you display the TV menu in Game Mode, the screen shakes slightly.
English
▶
●● Game Mode is not available when the input source is set to TV or PC.
●● After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
●● If Game Mode is On:
–– Picture mode is set to Standard and Sound mode is set to Movie.
◀
▶
English
●● BD Wise (Off / On) for PDP TV : Provides the optimal picture quality for Samsung
DVD, Blu-ray and Home Theatre products which support BD Wise. When BD
Wise is turned On, the picture mode is automatically changed to the optimal
resolution.
NN Available when connecting Samsung products that support BD Wise
through a HDMI cable.
●● Boot Logo (Off / On): Display Samsung logo when the TV is turned on.
◀
●● TV Name: Sets the TV name so you can find it easily on a mobile device.
NN If you select User Input, you can type on the TV using the OSK (On Screen
Keyboard).
English
▶
■■ Anynet+(HDMI-CEC)
For details on set up options, refer to the “Anynet+(HDMI-CEC)” instructions.
■■ DivX® Video On Demand
Shows the registration code authorized for the TV. If you connect to the DivX web
site and register, you can download the VOD registration file. If you play the VOD
registration using Videos under Smart Hub, the registration is completed.
NN For more information on DivX® VOD, visit “http://vod.divx.com”.
◀
■■ Network Remote Control (Off / On)
Turn on/off or give permission to Samsung mobile phones devices. You must
have a Samsung Mobile phone/ 3” touch control/ device which supports Wireless
Remote Control. For more details, refer to each device’s manual.
English
▶
■■ Common Interface
●● CI Menu: This enables the user to select from the CAM-provided menu. Select
the CI Menu based on the menu PC Card.
●● Application Info: View information on the CAM inserted into the CI slot and on
the “CI or CI+ CARD” which is inserted into the CAM. You can install the CAM
anytime whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by phone.
◀
2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in
the direction of the arrow so that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal channel.
English
▶
❑❑ Picture In Picture (PIP)
■■ PIP t
OO MENUm → System → PIP → ENTERE
You can watch the TV tuner and one external video source simultaneously. PIP
(Picture-in-Picture) does not function in the same mode.
NN NOTE
◀
●● For PIP sound, refer to the Sound Select instructions.
●● If you turn the TV off while watching in PIP mode, the PIP window will
disappear.
English
▶
●● You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
●● While Channel Lock and SMART HUB is in operation, the PIP function
cannot be used.
NN PIP settings
Main picture
Sub picture
Component, HDMI, PC
TV
◀
▶
English
●● PIP (Off / On): Activate or deactivate the PIP function.
●● Channel: Select the channel for the sub-screen.
●● Size (Õ / Ã): Select a size for the sub-picture.
●● Position (à / – / — / œ): Select a position for the sub-picture.
●● Sound Select (Main / Sub): You can choose the desired sound (Main / Sub)
in PIP mode.
◀
▶
English
❑❑ Support
■■ e-Manual
OO MENUm → Support → ENTERE
You can read the introduction and instructions about the TV features stored in your TV.
NN For the detailed information about e-Manual Screen, refer to “How to view the
e-Manual”.
◀
▶
Support Menu
English
■■ Self Diagnosis
OO MENUm → Support → ENTERE
NN Self Diagnostic might take few seconds, this is part of the normal operation of
the TV.
●● Picture Test (Yes / No): Use to check for picture problems.
●● Yes: If the test pattern does not appear or there is noise in the test pattern,
◀
select Yes. There may be a problem with the TV. Contact Samsung’s Call
Centre for assistance.
●● No: If the test pattern is properly displayed, select No. There may be a problem
with your external equipment. Please check your connections. If the problem
persists, refer to the external device’s user manual.
English
▶
●● Sound Test (Yes / No): Use the built-in melody sound to check for sound
problems.
NN If you hear no sound from the TV’s speakers, before performing the sound
test, make sure Speaker Select is set to TV Speaker in the Sound menu.
NN The melody will be heard during the test even if Speaker Select is set to
External Speaker or the sound is muted by pressing the MUTE button.
●● Yes: If the test pattern does not appear or there is noise in the test pattern,
◀
select Yes. There may be a problem with the TV. Contact Samsung’s Call
Centre for assistance.
●● No: If the test pattern is properly displayed, select No. There may be a problem
with your external equipment. Please check your connections. If the problem
persists, refer to the external device’s user manual.
English
▶
●● Signal Information: (digital channels only) HDTV channel’s reception quality is
either perfect or the channels are unavailable. Adjust your antenna to increase
signal strength.
●● Troubleshooting: If the TV seems to have a problem, refer to this description.
NN If none of these troubleshooting tips apply, contact the Samsung customer
service centre.
■■ Software Upgrade
◀
Software Upgrade can be performed via a broadcasting signal or by network
connection or downloading the latest firmware from “www.samsung.com”, to a
USB memory device.
English
▶
Installing the Latest Version
●● By USB: Insert a USB drive containing the
◀
firmware upgrade file, downloaded from
TV Rear Panel
“www.samsung.com”, into the TV. Please
be careful not to disconnect the power or
remove the USB drive until upgrades are
complete. The TV will be turned off and on
automatically after completing the firmware
●● The displayed menu may differ depending on the
model.
upgrade. When software is upgraded, video
and audio settings you have made will
return to their default settings. We advise you to to write down your settings so
that you can easily reset them after the upgrade.
English
▶
●● By Online: Upgrade the software using the Internet.
NN First, configure your network. For detailed procedures on using the Network
Setup, refer to the “Network Connection” instructions.
NN If the internet connection doesn’t operate properly, the connection may be
broken. Please retry downloading. If the problem persists, download by
USB and upgrade.
●● By Channel: Upgrade the software using the broadcasting signal.
◀
NN If the function is selected during the software transmission period, software
will be automatically searched and downloaded.
NN The time required to download the software is determined by the signal
status.
English
▶
●● Alternative Software (backup): If there is an issue with the new firmware and it
is affecting operation, you can change the software to the previous version.
NN If the software was changed, existing software is displayed.
●● Standby Mode Upgrade: A manual upgrade will be automatically performed
at selected time. Since the power of the unit is turned on internally, the screen
may be turned on slightly for the product. This phenomenon may continue for
more than 1 hour until the software upgrade is complete.
◀
■■ Contact Samsung
View this information when your TV does not work properly or when you want to
upgrade the software. You can find information regarding our call centres, and how
to download products and software.
English
▶
Advanced Features
❑❑ Using the 3D function
for PDP TV
■■ 3D
This exciting new feature enables you to view 3D content. In order to fully enjoy
this feature, you must purchase a pair of Samsung 3D Active Glasses to view
3D video. Samsung 3D Active Glasses are sold separately. For more detailed
purchasing information, contact the retailer where you purchased this TV.
◀
▶
English
OO MENUm → Picture → 3D → ENTERE
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES.
Read and understand the following safety information before using the TV’s
3D function.
[[ WARNING
●● Some viewers may experience discomfort while viewing 3D TV such as
◀
dizziness, nausea and headaches. If you experience any such symptom,
stop viewing 3D TV, remove 3D Active Glasses and rest.
●● Watching 3D images for an extended period of time may cause eye strain. If
you feel eye strain, stop viewing 3D TV, remove your 3D Active Glasses and
rest.
English
▶
●● A responsible adult should frequently check on children who are using the
3D function. If there are any reports of tired eyes, headaches, dizziness, or
nausea, have the child stop viewing 3D TV and rest.
●● Do not use the 3D Active Glasses for other purposes (such as general
eyeglasses, sunglasses, protective goggles, etc.)
●● Do not use the 3D function or 3D Active Glasses while walking or moving
◀
around. Using the 3D function or 3D Active Glasses while moving around
may result in injuries due to running into objects, tripping, and/or falling.
English
▶
●● 3D Mode: Select the 3D input format.
NN If you want to feel the 3D effect fully, please wear the 3D Active Glasses
first, and then select 3D Mode from the list below that provides the best 3d
viewing experience.
NN When watching 3D images, turn on 3D Active Glasses.
3D Mode
3D
◀
Operation
Turns the 3D function off.
2D → 3D
Changes a 2D image to 3D.
Side by Side
Displays two images next to each other.
Top & Bottom
Displays one image above another.
English
▶
NN Some files may not be supported the “2D → 3D.”
NN “Side by Side” and “Top & Bottom” are available when the resolution is
720p, 1080i and 1080p in DTV, HDMI and USB mode or when set to PC
and the PC is connected through an HDMI/DVI cable.
●● 3D Perspective (-5 ~ +5): Adjust overall 3D perspective of on-screen image.
●● Depth (0~10): Adjust overall depth.
●● L/R Change (L/R Image / R/L Image): Swap the left and right pictures.
◀
●● 3D → 2D (Off / On): Displays the image for the left eye only.
NN This function is deactivated when 3D Mode set to “2D → 3D” or Off.
English
▶
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x 1080 input.
An input resolution other than 1920 x 1080 may not be displayed properly in 3D
display or full screen mode.
◀
▶
English
How to watch the 3D image
●● Method
NN Some 3D modes may not be available depending on the format of the image
source.
NN To watch in 3D, wear 3D Active Glasses and press the power button on the
glasses.
◀
1. Press the MENU button on your remote, use the u
or d button to select Picture, and then press the
ENTERE button.
3D
3D
3D
3D Mode
3D Perspective
0
Depth5
2. Use the u or d button to select 3D, and then
press the ENTERE button.
L/R Change
L/R Image
3D → 2D
●● The displayed menu may differ
depending on the model.
English
Off
▶
3. Use the u or d button to select 3D
Mode, and then press the ENTERE
button.
4. Using the l or r buttons on your remote
control, select the 3D Mode of the image
you want to view.
3D Mode
Cancel
●● The displayed menu may differ depending on the
model.
◀
▶
English
Supported formats and operating specifications for Standard HDMI 3D
NN The 3D formats indicated below are recommended by the HDMI association
and must be supported.
◀
Source signal format
Standard HDMI 1.4 3D
1920x1080p@24Hz x 2
1920x2205p@24Hz
1280x720p@50/60Hz x 2
1280x1470p@50/60Hz
The mode is automatically switched to 3D mode for the 3D video input in one of
the formats above.
English
▶
Before using 3D function...
NN NOTE
●● You may notice a small amount of screen flickering when watching 3D images
in poor light conditions (from a strobe light, etc.), or under a fluorescent
lamp (50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the light or turn the
lamp off.
●● 3D Mode is set to Off automatically when accessing SMART HUB
◀
functions.
●● Some Picture functions are disabled in 3D mode.
●● PIP is not supported in 3D mode.
English
▶
●● 3D Active Glasses from Samsung’s previous product (IR type) or other
manufacturers not be supported.
●● When the TV is initially powered on, may take some time until the 3D display
is optimized.
●● The 3D Active Glasses may not work properly if there is any other 3D
◀
product or electronic devices turned on near the glasses or TV. If there is a
problem, keep other electronic devices as far away as possible from the 3D
Active Glasses.
●● When watching pictures from a 50Hz 3D source visually-sensitive viewers
may see some flicker on bright images.
English
▶
●● Some files are not supported in the 2D to 3D function.
●● If you lie on your side while watching TV with 3D active glasses, the picture
may look dark or may not be visible.
●● Be sure to stay within the viewing angle and optimum TV viewing distance
when watching 3D pictures.
●● Otherwise, you may not be able to enjoy proper 3D effects.
●● The ideal viewing distance should be three times or more the height of the
◀
screen. We recommend sitting with viewer’s eyes on a level with the screen.
English
▶
❑❑ Getting Started with Smart Hub
for PDP TV
Features
◀
Search All
Social TV
Easily search and access
content from diverse sources
(e.g. applications, Your Video,
AllShare).
Share your TV viewing
experience with your friends
via social networking service
(SNS).
▶
Your Video
Enjoy your movie wathing
with a customized
video on demand (VOD)
recommendation service.
* This feature is limited to
certain regions.
Smart Hub
English
Smart Hub brings useful and entertaining
contents and services directly from the web to
your TV.
Samsung Apps
Recommended
Favourites
Channel
Videos
Photos
Music
Schedule Manager
Source
a Login b Sort by { Edit Mode } Settings
●● The displayed menu may differ depending on the
model.
◀
▶
English
Screen Display
Application service: You can
experience various service by
provided samsung.
Samsung Apps
Recommended
TV Screen: Displays the
current channel.
◀
Favourites
Channel
Videos
Photos
Music
Schedule Manager
Source
a Login b Sort by { Edit Mode } Settings
Recommended Applications:
Displays the recommended
service by Samsung. You are
not able to add or delete a
service in this list.
Installed Applications
list: Displays the installed
applications in the TV.
Controls:
Information: Displays
notices, new applications,
and advertisements
brought to you by
Samsung product
introductions.
●● a Red (Login): To log in to Smart Hub.
●● b Green (Sort by): To sort the applications by category.
●● { Yellow (Edit Mode): You can edit the applications (such as
move, making folder).
●● } Blue (Settings): Edit and configure applications and Smart
Hub settings.
NN The colour buttons may work differently depending on the
application.
English
▶
NN NOTE
●● Configure the network settings before using Smart Hub. For more information,
refer to “Network Settings”.
●● Unsupported fonts within the provider’s content will not display normally.
●● Slow responses and/or interruptions may occur, depending on your network
conditions.
●● Depending on the region, English may be the only language supported for
◀
application services.
●● This feature is not available in some locations.
English
▶
●● If you experience a problem using a application, please contact the content
provider.
●● According to circumstances of the contents provider, an application’s updates
or the application itself may be discontinued.
●● Depending on your country’s regulations, some applications may have limited
service or not be supported.
◀
▶
English
Account Login
For an application with multiple accounts, select
^ to access the different accounts.
NN For a more enjoyable application experience,
register and log in to your account.
NN For instructions on creating an account, refer
Login
Smart Hub ID
Press [ENTER]
Password
Press [ENTER]
Remember Smart Hub ID and Password.
Login
Cancel
Create Account
Forgot Password
to “How to create an Smart Hub ID”.
◀
▶
English
1. Press the Red button in the Smart Hub home page.
2.Select ^ by pressing the u / d / l / r button. The account list appears.
NN If you want to create an account, select Create Account then the create
account OSD window will appear.
3. Select the desired Smart Hub ID, and the press the ENTERE button.
4. After selecting Smart Hub ID, enter the Password using the remote control.
NN When login succeeds, Smart Hub ID will be displayed on the screen.
◀
▶
English
How to create a Smart Hub ID
Before creating a Smart Hub ID, you should download the application first on the
Samsung Apps.
1. Press the Red button. The Login screen appears.
2.Select Create Account. The Create Account screen will appear.
3. Press the ENTERE button to enter a new Smart Hub ID. The Keypad screed
will appear.
◀ 4. Using the keypad screen, enter a Smart Hub ID.
NN A Smart Hub ID must be created in “sample@sample.com” form.
English
▶
Using the Keypad
Pressing the TTX/MIX button on the remote while you are using the Screen
Keypad enables you to change the text fields to lower case, capitalized case,
upper case, numbers and icons.
Using the Green b button on the remote control to change the input mode. (T9 /
ABC)
You can change the language by using the TOOLS button.
◀
You can use this Screen Keypad in a several Smart Hub applications.
Here is how to input characters using keypad of ABC type.
4-1. For example, suppose that you want to input “105Chang”.
4-2. Press the TTX/MIX button on the remote 3 times to change the input mode
from lower case to numbers.
4-3. Press the 1, 0 and 5 button in numerical order.
English
▶
4-4. Press the TTX/MIX button on the remote 4 times to change the input mode
from numbers to upper case.
4-5. Press the 2 button on the remote 3 times to input C.
4-6. Press the TTX/MIX button on the remote 3 times to change the input mode
from upper case to lower case.
4-7. Press buttons on the remote to input the rest of “Chang”. When done, press
the ENTERE button.
◀
▶
English
5. Using the remote control, enter the Password.
●● Password must be 6~12 words.
●● You can delete the entered character using the PRE-CH button.
●● Using the � (REW) or µ (FF) button, you can select icon you want to enter
in icon keypad screen.
◀
6. Account created. You can use the services provided by all users of your Samsung
TV with a single login by linking the users’ account to the TV ID. If you want to
register a service site ID, select Yes. Service Site list will appear on the screen.
English
▶
7. Select Register of the Service Site you want, then press the ENTERE button.
8. Using number buttons, enter your application site ID and password. Then press
the ENTERE button.
9. Registered successfully. If you add another service site, select Yes. then press the
ENTERE button, go to step 6.
10.When completed, select OK. Then press the ENTERE button.
◀
▶
English
❑ Setting up Smart Hub
■ Settings
Configure Smart Hub settings from this screen.
Highlight Settings using the u and d buttons
and press the ENTERE button.
Account Management
Service Manager
Reset
● Account Management
◀
Settings
Properties
Register Service Account: Register login
information for service sites.
Close
Change Password: Change account password.
Remove From TV Account List: Delete an account from the list of accounts.
Deactivate Account: Withdraw membership from Smart Hub.
English
▶
●● Service Manager
Ticker Autorun (Off / On): You can set Ticker Autorun to come on when
powering on the TV.
NN The Ticker application provides useful News, Weather, and Stock Market
information. The Ticker application on Smart Hub must be downloaded to use
this feature.
NN Depending on your country, Ticker application may have a different service or
◀
not be supported.
Channel Bound Service (Off / On): Some channels support applications as an
Internet data service, allowing you to access the Internet service while watching
TV.
NN Only available if supported by the broadcaster
English
▶
●● Reset: Resets Smart Hub settings to factory default settings. If you want reset
Smart Hub, Enter password.
●● Properties
More: Display information about Smart Hub.
Terms of Service Agreement: Display the Terms of Service Agreement.
◀
▶
English
❑❑ Using the Smart Hub service
■■ Samsung Apps
Samsung Apps is a store for downloading applications to be used on Samsung
TV/AV equipment.
Users can enjoy a variety of contents such as videos, music, photos, games,
useful information etc. using the downloaded applications.
◀
Additional applications will be available in the future.
English
▶
NN Using the colour buttons with the Samsung Apps.
●● a Red (Login): To log in to the internet
service.
What’s New?
Recommended
To change the view mode.
Name
TV store Test User002
Game
Sports
Most recent
YouTube
Video
●● b Green (List View / Thumbnail View):
Most downloaded
Free
Lifestyle
Information
Other
My Account
●● } Blue (Sort by): To sort the
◀
Help
a Login b Thumbnail View } Sort by R Return
applications by Recommended, Most
downloaded, Most recent or Name.
●● R Return: Moves to previous menu.
English
▶
Using the Samsung Apps by category
The following categories are available:
●● What’s New?: Displays newly registered applications.
●● Video: Displays various video media such as movies, TV shows and short length
videos.
●● Game: Displays various games such as sudoku and chess.
●● Sports: Displays various sports media such as match information, images and
◀
▶
short length video.
●● Lifestyle: Includes various lifestyle media services such as music, personal photo
management tools and social networking such as Facebook and Twitter.
English
●● Information: Includes various information services such as news, stocks and
weather.
●● Other: Includes other miscellaneous services.
●● My Account: Displays the application list and your cyber cash balance.
NN Starting in the middle of 2010 (US and Korea only), you can purchase cyber-
cash for buying applications through tv.samsung.com.
●● Help: If you have questions about Smart Hub, check this section first.
◀
▶
English
[Legal Statement]
Due to the various capabilities of products featuring the Samsung Smart Hub Content Service, as well as limitations in the available content, certain features,
applications, and services may not be available on all devices or in all territories.
◀
Some features on Smart Hub may also require additional peripheral devices or
membership fees that are sold separately. Please visit http://www.samsung.
com for more information on specific device information and content availability.
The services and availability of content through Smart Hub are subject to
change from time to time without prior notice.
English
▶
❑❑ Troubleshooting for SMART HUB
◀
Problem
Possible Solution
Some application contents only
appear in English. How can I change
the language?
The Application content language may be different from the
application user interface language.
Some application services do not
work.
Check with the service provider.
When a network error occurs, I can
only use the setting menu.
If network connection doesn’t work, your service might be
limited, as all functions except the setting menu are needed to
connect to the internet.
The ability to change the language depends on the service
provider.
Refer to the help website for application service provider
information.
English
▶
All content and services accessible through this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual property laws. Such content and services are
provided solely for your personal noncommercial use. You may not use any content or services in a
manner that has not been authorized by the content owner or service provider. Without limiting the
foregoing, unless expressly authorized by the applicable content owner or service provider, you may not
modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute
in any manner or medium any content or services displayed through this device.
◀
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICE IS AT YOUR SOLE RISK
AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE AND ACCURACY
IS WITH YOU. THE DEVICE AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS
IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. SAMSUNG EXPRESSLY
DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE DEVICE AND ANY CONTENT
AND SERVICES, EITHER EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY, OF SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, OF
ACCURACY, OF QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR COMPLETENESS
OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT
WARRANT THAT THE DEVICE, CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS, OR THAT
OPERATION OF THE DEVICE OR SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE.
English
▶
UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER
IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF THE
DEVICE, OR ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY THIRD PARTY, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
◀
Third party services may be changed, suspended, removed, terminated or interrupted, or access may be
disabled at any time, without notice, and Samsung makes no representation or warranty that any content
or service will remain available for any period of time. Content and services are transmitted by third parties
by means of networks and transmission facilities over which Samsung has no control. Without limiting
the generality of this disclaimer, Samsung expressly disclaims any responsibility or liability for any change,
interruption, disabling, removal of or suspension of any content or service made available through this
device. Samsung may impose limits on the use of or access to certain services or content, in any case and
without notice or liability.
Samsung is neither responsible nor liable for customer service related to the content and services. Any
question or request for service relating to the content or services should be made directly to the respective
content and service providers.
English
▶
All Share
❑❑ About AllShare™
AllShare™ connects your TV and compatible Samsung mobile phones/ devices
through a network. You can play media contents including videos, photos and
music saved on your mobile phones or the other devices (such as your PC) by
controlling them on the TV via the network.
NN For more information, visit “www.samsung.com” or contact the Samsung call
centre. Mobile devices may need additional software installation. For details,
refer to each device’s user’s guide.
◀
▶
English
❑❑ Setting Up AllShare™
■■ AllShare Settings
●● Media (On / Off): Enables or disables the media
function. When the media function is on, Media
contents play can be controlled by a mobile phone
or other devices that support DLNA DMC.
◀
AllShare Settings
Media
▶
English
■■ Media
Shows a list of mobile phones or connected devices which have been set up with
this TV for using the Media function.
NN The Media function is available in all devices which support DLNA DMC.
●● Allowed / Denied: Allows/Blocks the the devices.
●● Delete: Deletes the devices from the list.
NN This function only deletes the name of the device from the list. If the deleted
◀
device is turned on or tries to connect to the TV, it may appear on the list
again.
English
▶
Using the Media Function
An alarm window appears informing the user that the media contents (videos, photos,
music) sent from a mobile phone will be displayed on your TV. The contents are played
automatically 3 seconds after the alarm window appears. If you press the RETURN or
EXIT button when the alarm window appears, the media contents are not played.
NN NOTE
●● If the media function executes for the first time, the warning popup window
◀
appears. Press the ENTERE button to select Allow, then you can use Media
function on that device.
English
▶
●● To turn off the media contents transmission from the mobile phone, set Media
to Off in the AllShare Settings.
●● Contents may not be played on your TV depending on their resolution and
format.
●● The ENTERE and l / r buttons may not work depending on the type of
media content.
●● Using the mobile device, you can control the media playing. For details, refer to
◀
each mobile’s user’s guide.
▶
English
What is Anynet+? t
Anynet+ is a function that enables you to control all connected Samsung devices that
support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used
only with Samsung devices that have the Anynet+ feature. To be sure your Samsung
device has this feature, check if there is an Anynet+ logo on it.
NN NOTE
●● You can only control Anynet+ devices using the TV remote control, not the
◀
buttons on the TV.
●● The TV remote control may not work under certain conditions. If this occurs,
reselect the Anynet+ device.
●● The Anynet+ functions do not operate with other manufacturers’ products.
Anynet+
English
▶
For the method of connecting external devices , refer to the supported user manual.
NN NOTE
●● Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack
on your TV and the Digital Audio Input on the Home Theatre.
●● When following the connection above, the Optical jack only outputs 2 channel
◀
audio. You will only hear sound from the Home Theatre’s Front, Left and Right
speakers and the subwoofer. If you want to hear 5.1 channel audio, connect
the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (i.e.
Anynet Device 1 or 2) directly to the Amplifier or Home Theatre, not the TV.
English
▶
●● You can connect only one Home Theatre.
●● You can connect an Anynet+ device using the HDMI cable. Some HDMI cables
may not support Anynet+ functions.
●● Anynet+ works when the AV device supporting Anynet+ is in the standby or on
status.
●● Anynet+ supports up to 12 AV devices in total. Note that you can connect up
to 3 devices of the same type.
◀
▶
English
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+
devices connected to the TV.
Anynet+ Menu
View TV
Device List
◀
Description
Changes Anynet+ mode to TV broadcast mode.
Shows the Anynet+ device list.
Recording: (*recorder)
Starts recording immediately using the recorder. (This is only available for
devices that support the recording function.)
(device_name) MENU
Shows the connected device menus. E.g. If a DVD recorder is connected,
the disc menu of the DVD recorder will appear.
(device_name) TOOLS
Shows the tools menu of the connected device. E.g. If a DVD recorder is
connected, the play menu of the DVD recorder will appear.
NN Depending on the device, this menu may not be available.
English
▶
Anynet+ Menu
(device_name) Title Menu
Description
Shows the title menu of the connected device. E.g. If a DVD recorder is
connected, the title menu of the DVD recorder will appear.
NN Depending on the device, this menu may not be available.
Stop Recording: (*recorder)
Receiver
Stops recording.
Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and
if only one recording device is connected, it will be represented as (*device_name).
◀
▶
English
❑❑ Setting Up Anynet+
OO MENUm → System → Anynet+ (HDMI-CEC) → ENTERE
■■ Anynet+ (HDMI-CEC) (Off / On)
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
NN When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related
operations are deactivated.
◀
▶
English
■■ Auto Turn Off (No / Yes)
Setting an Anynet+ Device to turn off automatically when the TV is turned off.
NN If Auto Turn Off is set to Yes, running external devices will turn off at the same
time as the TV powers off. However, a device may not turn off if recording is in
progress.
NN May not be enabled depending on the device.
◀
▶
English
❑❑ Switching between Anynet+ Devices
1. Press the TOOLS button to select Anynet+ (HDMI-CEC). And then press the
ENTERE button to select Device List.
NN If you cannot find a device you want, select Refresh to refresh the list.
2. Select a device and press the ENTERE button. You can switch to the
selected device.
NN The Device List menu will only appear when you set Anynet+ (HDMI-CEC)
◀
to On in the System menu.
▶
English
●● Switching to the selected device may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
●● If you have selected external input mode by pressing the SOURCE button,
you cannot use the Anynet+ function. Make sure to switch to an Anynet+
device by using the Device List.
◀
▶
English
❑❑ Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV
Speaker.
1.Select Receiver and set to On.
2. Press the EXIT button to exit.
NN If your receiver supports audio only, it may not appear in the device list.
NN The receiver will work when you have properly connected the optical in jack
◀
of the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
English
▶
NN When the receiver (i.e Home Theatre) is set to On, you can hear sound
output from the TV’s Optical jack. When the TV is displaying a DTV (air)
signal, the TV will send out 5.1 channel sound to the receiver. When the
source is a digital component such as a DVD and is connected to the TV via
HDMI, only 2 channel sound will be heard from the receiver.
◀
▶
English
❑❑ Troubleshooting for Anynet+
Problem
Possible Solution
Anynet+ does not work.
•• Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
••
••
••
••
◀
Only one receiver (home theatre) can be connected.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
•• Check whether the TV remote control is in TV mode.
•• Check whether the remote control is Anynet+ compatible.
•• Anynet+ doesn’t work in certain situations. (Searching channels or
Plug & Play (initial setup), etc.)
•• When connecting or removing the HDMI cable, please make sure to
search devices again or turn your TV off and on again.
•• Check if the Anynet+ Function of Anynet+ device is set on.
English
▶
I want to start Anynet+.
•• Check if the Anynet+ device is properly connected to the TV and
check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup
menu.
•• Press the TOOLS button to display the Anynet+ menu and select a
menu you want.
I want to exit Anynet+.
•• Select View TV in the Anynet+ menu.
•• Press the SOURCE button on the TV remote control and select a
non- Anynet+ device.
◀
The message “Connecting to
Anynet+ device...” appears on
the screen.
•• You cannot use the remote control when you are configuring Anynet+
or switching to a view mode.
•• Use the remote control when the Anynet+ setting or switching to view
mode is complete.
The Anynet+ device does not
play.
•• You cannot use the play function when Plug & Play (initial setup) is in
progress.
English
▶
The connected device is not
displayed.
•• Check whether or not the device supports Anynet+ functions.
•• Check whether or not the HDMI cable is properly connected.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
•• Search Anynet+ devices again.
•• You can connect an Anynet+ device using the HDMI cable only. Some
HDMI cables may not support Anynet+ functions.
•• If connection is terminated because there has been a power
interruption or the HDMI cable has been disconnected, please repeat
the device scan.
◀
The TV Programme cannot be
recorded.
•• Check whether the antenna jack on the recording device is properly
The TV sound is not output
through the receiver.
•• Connect the optical cable between TV and the receiver.
connected.
English
▶
❑❑ Using the Media Contents
Enjoy photos, music and/or movie files saved on a USB Mass Storage Class (MSC)
device.
1. Press the SMART HUB button.
Search All
Samsung Apps
2. Press the d or u button to select desired
menu (Videos, Photos, Music), then press
the ENTERE button.
◀
Recommended
Favourites
Channel
Videos
Photos
Music
Schedule
Source
a Login b Sorting { Edit } Settings
●● The displayed menu may differ depending on the
model.
My Contents
English
▶
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing recorded
tv, photo, music and/or movie files to the
USB port on the back or side panel of the
TV.
◀
3. When USB is connected to the TV, popup
window appears. Then you can select New
device connected.
English
TV Rear Panel
USB Drive
●● The displayed menu may differ depending on the
model.
▶
❑❑ Connecting to the PC through network
You can play pictures, music and videos saved on your PC through a network
connection in the SMART HUB mode.
1. For more information on how to configure your network, refer to “Setting the
Network”.
●● You are recommended to locate both TV and PC in same subnet. The first
◀
3 parts of the subnet address of the TV and the PC IP addresses should be
the same and only the last part (the host address) should be changed. (e.g.
IP Address: 123.456.789.**)
English
▶
2. Using a LAN cable, connect between the external modem and the PC onto
which the AllShare PC Software will be installed.
●● You can connect the TV to the PC directly without connecting it through a
Sharer (Router).
NN Functions that are not supported when connecting to a PC through a network:
●● The BGM Mode and Background Music Setting functions.
●● Sorting files by preference in the Photos, Music and Videos folders.
◀
●● The � (REW) or µ (FF) button while a movie is playing.
NN DivX DRM, Multi-audio, embedded captions are not supported.
NN AllShare PC Software should be permitted by the firewall programme on your PC.
English
▶
NN When you use SMART HUB mode through a network connection, depending on
the functions of the provided server:
●● The sorting method may vary.
●● The Scene Search function may not be supported.
●● The Resume, which resumes playing of a video, may not be supported.
–– The Resume function does not support multiple users. (It will have only
memorised the point where the most recent user stopped playing.)
◀
●● The l or r button may not work depending on the content information.
NN You may experience file stuttering while playing a video in SMART HUB through a
network connection.
English
▶
Before using Media Contents functions...
NN It might not work properly with unlicenced multimedia files.
NN Need-to-Know List before using Media Contents
●● MTP (Media Transfer Protocol) is not supported.
●● The file system supports FAT16, FAT32 and NTFS.
●● Certain types of USB Digital camera and audio devices may not be compatible
with this TV.
◀
▶
English
●● Media Contents only supports USB Mass Storage Class (MSC) devices.
MSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC
are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
●● Before connecting your device to the TV, please back up your files to prevent
them from damage or loss of data. SAMSUNG is not responsible for any data
file damage or data loss.
●● Connect a USB HDD to the dedicated USB 1 (HDD) port.
◀
●● Do not disconnect the USB device while it is loading.
●● The higher the resolution of the image, the longer it takes to display on the
screen.
English
▶
●● The maximum supported JPEG resolution is 15360X8640 pixels.
●● For unsupported or corrupted files, the “Not Supported File Format” message
is displayed.
●● If the files are sorted by Folder View, up to 1000 files can be displayed in each
folder.
●● If the number of files and folders saved on a USB storage device is
◀
approximately over 8000, the files and folders may not appear and some
folders may not be opened.
●● MP3 files with DRM that have been downloaded from a non-free site cannot
be played. Digital Rights Management (DRM) is a technology that supports
the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the
content providers, the prevention of the illegal copying of contents, as well as
managing billings and settlements.
English
▶
●● If more than 2 PTP devices are connected, you can only use one at a time.
●● If more than two MSC devices are connected, some of them may not be
recognized. A USB device that requires high power (more than 500mA or 5V)
may not be supported.
●● If an over-power warning message is displayed while you are connecting or
using a USB device, the device may not be recognized or may malfunction.
◀
▶
English
●● If the TV has been no input during time set in Auto Protection Time, the
Screensaver will run.
●● The power-saving mode of some external hard disk drives may be released
automatically when connected to the TV.
●● If a USB extension cable is used, the USB device may not be recognized or the
files on the device may not be read.
●● If a USB device connected to the TV is not recognized, the list of files on the
◀
device is corrupted or a file in the list is not played, connect the USB device to
the PC, format the device and check the connection.
●● If a file deleted from the PC is still found when SMART HUB is run, use the
“Empty the Recycle Bin” function on the PC to permanently delete the file.
English
▶
Screen Display
Move to the file you desired using the up / down / right / left buttons and then press
the ENTERE or � (Play) button. The file is played.
Device name: Displays a
connected device name.
◀
File List Section: You
can confirm the files and
groups that is sorted by
each category.
Music
Home: Return to content
home
SUM
Upper Folder
Sweet Candy
I Love Music
Musikk_5
Ming
Ingen artist
Musikk_1
Musikk_6
Ingen artist
Ingen artist
Musikk_2
Musikk_7
Ingen artist
Ingen artist
Musikk_3
Musikk_8
Ingen artist
Ingen artist
Musikk_4
Musikk_9
Ingen artist
Ingen artist
Page bar: Moves to another page containing a list of files.
English
Change Content/Device:
Changes the content type or
connected device.
Sorting: Displays sorting
standard. Sorting standard
is different depending on the
contents.
Edit Mode: Select and play
multiple files or assign them
to My Playlist. This function is
available only for Music.
▶
❑❑ Recorded TV
for PDP TV
To use the recording or Timeshift function, the connected USB device must be
available for recording. Device format is recommended to use USB HDD.
NN During the Device formatting, do not disconnect the device while formatting is
in progress. If you format the device, all files will be deleted.
NN Before formatting your device to the tv, please back up your files to prevent
◀
them from damage or loss of data. SAMSUNG is not responsible for any data
file damage or data loss.
NN The reading/writing performance and controller of USB hard disk drives vary.
Accordingly, some USB HDD may fail a performance test. A USB hard disk
drive that fails a performance test cannot be used with a PVR.
English
▶
■■ Timer Recording (in Schedule Manager)
OO SMART HUB → Schedule Manager → ENTERE
Allows you to make a reservation to record a program scheduled for broadcast.
Set the current time first to use this function.
Using the Timer Recording function (digital channels only)
1. Press the ENTERE button to select Schedule Manager. The Schedule
Manager screen will be displayed.
◀
2. Press the ENTERE button to add manual booking. A pop up screen will
appear.
English
▶
3. Press the l or r button to select the Timer Recording.
NN We recommend using a USB HDD with at least 5400 rpm, but a USB HDD
of RAID type is not supported.
NN A USB storage device cannot record until it completes the Device
Performance Test.
4. Press the l / r / u / d buttons to set the Antenna, Channel, Date or Start
Time.
◀
▶
English
To record a current broadcasting program
Allows you to record a program currently being broadcasted.
Set the current time first to use this function.
1. When you watch a broadcast program, press the � (REC) button on the
remote to record. A pop up window will appear.
NN We recommend using a USB HDD with at least 5400 rpm, but a USB HDD
of RAID type is not supported.
◀
NN A USB storage device cannot record until it completes the Device
Performance Test.
2.Select Length to set up the recording time, and then select OK.
English
▶
Using the Timeshift function
If you missed a live broadcast, you can see from the recorded broadcast using this
feature.
1. When you watch a broadcast program, press the � (Play) button on the
remote to start the Timeshift function.
2. If you want to stop the Timeshift function, press the � (Stop) button on the
remote.
◀
▶
English
NN The Timeshift mode operates for a maximum of 90 minutes.
NN After the Timeshift mode function has run for the maximum time, the time
information will be fixed to “01:30:00.”
NN The Timeshift function is not supported for analogue channels.
NN The Timeshift functions are disabled for channels locked with Channel
Lock.
◀
▶
English
Before using the Timeshift and a record function...
[[ Recorded videos are DRM (digital rights management) protected and cannot be
played on a PC or other TVs. Note that files saved on the TV cannot be used
after the main board is changed.
NN NOTE
●● We recommend using a USB HDD with at least 5400 rpm, but a USB HDD
of RAID type is not supported.
◀
●● The availability of both recording and the Timeshift function may differ
depending on picture quality and the free space on the hard disk drive.
●● Note that if you have paused the recording the TV will automatically resume
playback.
English
▶
●● If the 5% free memory space limit of the USB storage device is reached, the
current recording process will be closed.
●● When recording is performed by both the PVR (Personal Video Recorder)
function and a device that supports the HDMI-CEC feature, recording by the
PVR function takes precedence.
◀
▶
English
●● If the USB device has failed the Device Performance Test, the USB device
must go through the Device Format and Device Performance Test again
before you record with the Guide or Channel.
●● The Timeshift functions can only be used with a USB storage device that
completed the Device Performance Test.
●● If you attempt the recording or Timeshift function with a device that did not
have the Device Performance Test, the function will not start.
◀
▶
English
●● If you press � (REC) on the remote control while the Channel screen is
being displayed or record with Timer Recording, the TV may start or stop
recording 1 or 2 seconds later than you intended due to the time needed to
process the command.
●● If a USB device dedicated to recording is connected, existing Timeshift or
recording files that were saved abnormally will automatically be deleted.
●● If you switch to external input mode during recording, the recording will
◀
continue but the � (REC) button will be disabled.
●● If any function that turns off the TV (Sleep Timer, Off timer, etc.) is set
for a time that conflicts with recording, the TV will be turned off once the
recording is complete.
English
▶
Playing Recorded TV Program
1. Press the l / r / u / d button to select the desired file in the file list.
2. Press the ENTERE button or � (Play) button.
●● The selected file is displayed on the top with its playing time.
●● During playing the recorded TV program, you can search using the l and r
button.
◀
●● You can use � (REW) and µ (FF) buttons during playback.
English
▶
■■ Videos
Playing Video
1. Press the l / r / u / d button to select
the desired file in the file list.
1:02:15 / 2:04:10
3/15
1:02:15 / 2:04:10
2. Press the ENTERE button or � (Play)
button.
◀
▶
English
●● The selected file is displayed on the top with its playing time.
●● If video time information is unknown, play time and progress bar are not
displayed.
●● During playing the video, you can search using the l and r button.
●● You can use � (REW) and µ (FF) buttons during playback.
◀
▶
English
NN In this mode, you can enjoy movie clips contained on a Game, but you
cannot play the Game itself.
●● Supported Subtitle Formats
◀
Name
File extension
Format
MPEG-4 time-based text
.ttxt
XML
SAMI
.smi
HTML
SubRip
.srt
string-based
SubViewer
.sub
string-based
Micro DVD
.sub or .txt
string-based
English
▶
●● Supported Video Formats
File Extension
*.avi
*.mkv
Container
AVI
MKV
◀
*.asf
*.wmv
*.mp4
ASF
ASF
MP4
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
DivX 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Motion JPEG
1920x1080
6 ~ 30
8
DivX 3.11 / 4.x / 5.1 / 6.0
1920x1080
6 ~ 30
8
XviD
1920x1080
6 ~ 30
8
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
Motion JPEG
1920x1080
6 ~ 30
8
Window Media Video v9
1920x1080
6 ~ 30
25
WMA
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
XVID
1920x1080
6 ~ 30
8
MP3 /
ADPCM /
AAC
English
Audio Codec
MP3 / AC3
/ LPCM /
ADPCM /
DTS Core
MP3 / AC3
/ LPCM /
ADPCM /
WMA
▶
File Extension
*.3gp
3GPP
*.vro
VRO
VOB
*.mpg
*.mpeg
◀
Container
*.ts
*.tp
*.trp
PS
TS
Video Codec
Resolution
Frame rate
(fps)
Bit rate
(Mbps)
H.264 BP / MP / HP
1920x1080
6 ~ 30
25
MPEG4 SP / ASP
1920x1080
6 ~ 30
8
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
MPEG1
1920x1080
24 / 25 / 30
30
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
MPEG2
1920x1080
24 / 25 / 30
30
H.264
1920x1080
6 ~ 30
25
VC1
1920x1080
6 ~ 30
25
English
Audio Codec
ADPCM /
AAC / HEAAC
AC3 / MPEG
/ LPCM
AC3 / MPEG
/ LPCM /
AAC
AC3 / AAC /
MP3 / DD+ /
HE-AAC
▶
Video Decoder
Audio Decoder
•• Supports up to H.264, Level 4.1
•• GMC / H.264 FMO / ASO / RS, VC1 SP / MP /
•• Supports up to WMA 7, 8, 9, STD
•• WMA 9 PRO does not support 2 channel excess
AP L4 and AVCHD are not supported.
multi channel or lossless audio.
•• XVID, MPEG4 SP, ASP:
•• WMA sampling rate 22050Hz mono is not
supported.
−− Below 1280 x 720: 60 frame max
−− Above 1280 x 720: 30 frame max
◀
▶
English
Other Restrictions
NN NOTE
●● Video content will not be played, or not be played correctly, if there is an error
in the content or the container.
●● Sound or video may not work if the contents have a standard bitrate/frame rate
above the compatible Frame/sec listed in the table above.
●● If the Index Table is in error, the Seek (Jump) function is not supported.
◀
●● You may experience file stuttering while playing a video through a network
connection.
●● Video content can not be played, if there are many contents in one file.
English
▶
Playing movie file continuously (Resume Play)
If you exit the playing Videos function, it can be played later from the point where it
was stopped.
NN The Resume function does not support multiple users. (It will have only memorised
the point where the most recent user stopped playing.)
1. Select the movie file you want to play continuously by pressing the l or r button
to select it from the file list section.
◀
2. Press the � (Play) / ENTERE button.
NN A triangle icon will appear on the progress bar when the playback starts.
3. Press the TOOLS button, and then select Resume. The Movie will begin to play
from where it was stopped.
English
▶
■■ Music
Playing Music
1. Press the l / r / u / d button to select the
desired music file in the file list.
2. Press the ENTERE button or � (Play)
button.
◀
●● During playing the music, you can search
using the � (REW) and µ (FF) button.
English
I Love You
Ming
Musikk_1
M
Mu
Ingen
Inge
n artist
a
Musiikk_
kk 2
kk_2
Ingen ar
artist
st
Musi
siikk_
k__3
Inge
en a
artist
ist
st
Love
R&B
2011-01-01
tag
1.2MB
01:01/03:12
I Love You
Ming
Musikk_4
_
_4
Ingen arrti
tistt
Musikk_5
Ingen artistt
Musikk_
kk__6
Inge
en artist
a tist
Musikk_7
kk_7
_7
Inge
ngen
n ar
artist
Mu kk_8
Musi
k
Ingen artist
In
▶
NN Only displays the files with MP3 extension. Other file extensions are not
displayed, even if they are saved on the same USB device.
NN If the sound is abnormal when playing MP3 files, adjust the Equalizer in the
Sound menu. (An over-modulated MP3 file may cause a sound problem.)
◀
▶
English
Creating My Playlist
1. On the Music screen in the SMART HUB menu, press the l / r / u / d button
Edit Mode, and then press the ENTERE button.
to select
2. Press the l / r / u / d button to select the tracks you want to add and press the
ENTERE button.
NN The check box appears to the left of the selected files.
NN To select all the files in the current page, select Select All at the top.
◀ 3. Press the l / r / u / d button to select Add to My Playlist.
NN Note that selecting My Playlist Initialize will return My Playlist to the default
playlist.
English
▶
4. Press the ENTERE button. The message “Selected items added to My
Playlist” is displayed.
5. The newly created or updated playlist will be in the main Music page.
NN Edit Mode is not accessible in DLNA.
Playing My Playlist
◀
Select the My Playlist folder and it will play automatically. Press the u or d button to
select a different music file within the play list.
NN To delete a file from My Playlist, select the recycle bin icon next to the file you
want to delete by using the direction buttons.
English
▶
Playing the selected music files
1. On the Music screen in the SMART HUB
menu, press the l / r / u / d button to select
Edit Mode, and then press the ENTERE
button.
2. Press the l / r / u / d button to select
the desired music file in the file list, and then
ENTERE button.
◀
Playlist
I Love You
Ming
Musikk_1
M
Mu
Ingen
Inge
n artist
a
Musiikk_
kk 2
kk_2
Ingen ar
artist
st
Musi
siikk_
k__3
Inge
en a
artist
ist
st
Love
R&B
2011-01-01
tag
1.2MB
01:01/03:12
I Love You
Ming
Musikk_4
_
_4
Ingen arrti
tistt
Musikk_5
Ingen artistt
Musikk_
kk__6
Inge
en artist
a tist
Musikk_7
kk_7
_7
Inge
ngen
n ar
artist
Mu kk_8
Musi
k
Ingen artist
In
●● The displayed image may differ depending on the
model.
▶
English
NN NOTE
●● The check box mark appears to the left of the selected files.
●● To select all the files in the current page, select Select All at the top.
●● To cancel a selection, press the ENTERE button again.
3. Press the l / r / u / d button to select Play. The selected music files will be
play.
◀
▶
English
■■ Photos
Viewing a Photo (or Slide Show)
Normal
Friends.jpg
1024 X 768
2011/01/03
1. Press the l / r / u / d button to select the
desired file in the file list.
2. Press the ENTERE button.
●● When you press the � (Play) button
◀
in the file list, slide show will be started
immediately.
English
●● The displayed image may differ depending on the
model.
▶
●● All files in the file list section will be displayed in the slide show.
●● During the slide show, files are displayed in order from currently being shown.
NN Music files can be automatically played during the slide show if the Background
Music is set to On.
NN The BGM Mode cannot be changed until the BGM has finished loading.
◀
▶
English
❑❑ Media Contents - Additional Function
Sorting the file list
To sort files in the file list, select the
Sorting by using the l / r / u / d
button. And then press the ENTERE button.
Category
◀
Recorded TV
for PDP TV
Operations
Videos
Music
Photos
>
>
>
>
>
Folder View
Displays the whole folder. You can
view the file name and thumbnail by
selecting the folder.
Title
Sorts and displays the file title in
Symbol/Number/Alphabet/Special
order.
>
>
Latest Date
Sorts and shows files by the latest
date.
>
>
>
Earliest Date
Sorts and shows files by the earliest
date.
>
>
>
English
▶
Category
Recorded TV
for PDP TV
Operations
Videos
Music
Artist
Sorts the music file by artist in
alphabetical order.
>
Album
Sorts the music file by album in
alphabetical order.
>
Genre
Sorts music files by the genre.
>
Monthly
Sorts and shows photo files by
month.
◀
>
Photos
>
▶
English
Videos / Music / Photos Play Option menu
The following functions are enabled during playback.
Category
◀
Operations
Videos
Music
Photos
>
>
>
List
Return to the file list.
Previous / Next
Go to previous / next photo file.
>
Start Slide Show /
Stop Slide Show
You can start or stop a slide show.
>
Slide Show Speed
You can select the slide show speed during the slide
show. Alternatively, the � (Rew) or µ (FF) button
on the remote can be used.
>
Background Music
On
You can start or stop a background music.
>
Background Music
Setting
You can set and select background music when
watching a photo file or slide show.
>
Picture Mode
You can change the Picture Mode.
English
>
>
▶
Category
◀
Operations
Videos
Music
Photos
>
>
>
Sound Mode
You can change the Sound Mode.
Zoom
You can zoom into images in full screen mode.
>
Rotate
You can rotate images.
>
Title Search
You can move directly to another Title.
>
Subtitle
You can view a subtitle. You can select a specific
language if the subtitle file contains multiple
languages.
>
Repeat Mode
You can play movie and music files repeatedly.
>
Picture Size
You can adjust the picture size to your preference.
>
Subtitle Setting
Displays the Subtitle Setting. You can set up a
subtitle option.
>
English
▶
>
>
Category
◀
Operations
Videos
Music
Photos
>
>
>
Play / Pause
You can start or stop. Alternatively, the � (Play) or
� (Pause) button on the remote can be used.
Start Slide Show /
Stop Slide Show
You can start or stop a slide show.
Shuffle
You can play the music sequentially or randomly.
Resume
A movie file will begin to play from where it was
stopped.
>
Scene Search
You can search scene divided into 5 chapters you
want.
>
Time Search
You can search the movie using l and r buttons at
intervals of 10 seconds.
>
>
>
NN To view detailed information about the selected device, press the INFO button.
NN To view detailed information about the selected file, press the INFO button.
English
▶
Other Information
■■ Data Service
for Italy
Allows the user to use information (text, still images, graphics, documents,
software, etc.) transmitted via broadcast media.
Auto Run Data Service (On / Off)
Sets whether or not to automatically run data service. Auto Run Data Service
automatically runs data service without user intervention.
NN If any other secondary function is under way, Auto Run Data Service may not
work.
English
▶
Using Data Service
If the channel you are currently watching provides data service, you can enjoy a
variety of data services by pressing the , for Italy or red button.
NN Provided Data Service information may vary depending on broadcast.
NN While using data service, changing the channel using the numeric buttons may
not be possible depending on the service.
◀
1. Press the , for Italy button. Select a desired service by pressing the u / d / l
/ r and OKE buttons.
NN If Auto Run Data Service is On, the data service will automatically run with
loading banner. In this case, the ,
for Italy
English
button does not work.
▶
2. Press the red button. The data service screen will be displayed.
3. Move to a desired option by pressing the u / d / l / r button on the data
service screen and then press OKE. The selected service will be started.
NN If a Colour button of a certain function appears on the screen, you can use
the offered function by pressing the corresponded button.
4. If you press EXIT button, data service will be closed.
◀
▶
English
Main Data Service buttons and their functions
Button
, for Italy or
red button.
(Data Service)
BACKR
◀
Colour Button
Operation
Displays the Data Service list and immediately starts Data Service.
Returns to the previous screen.
Perform functions corresponding to each Colour button image displayed on the screen during
Data Service.
NN Operations may differ depending on the service provider.
Symbol
Text can be inputted using the numbers and letters printed on and above the numeric keys
on the remote control. If you input the numeric keys on the remote control one by one into
the blank where the cursor is located on the text input screen, the corresponding lettering,
numbers or special characters will be displayed. e.g., If you press the number 3 key in rapid
succession, then the assigned etters (D, E, and F) and the number 3 will alternately appear in
order of input.
English
▶
TEXT
u/d/l/r
OKE
EXIT e
Switches to teletext mode or Returns to the previous screen.
NN Operations may differ depending on the service provider.
Moves the Data Service menu up, down, left and right.
Runs a selected item.
Stops a running Data Service.
◀
▶
English
❑❑ Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these
troubleshooting tips apply, please visit “www.samsung.com” then click on Support, or
contact the call centre listed on the back-cover of this manual.
◀
Issues
Solutions and Explanations
Picture Quality
First of all, please perform the Picture Test and confirm that your TV is
properly displaying test image.
(go to MENU - Support - Self Diagnosis - Picture Test)
If the test image is properly displayed, the poor picture may caused by the
source or signal.
English
▶
Issues
Solutions and Explanations
The TV image does not look as
good as it did in the store.
•• If you have an analogue cable/set top box, upgrade to a digital set top
box. Use HDMI or Component cables to deliver HD (high definition)
picture quality.
•• Cable/Satellite subscribers: Try HD stations from the channel line up.
•• Antenna connection: Try HD stations after performing Auto programme.
NN Many HD channels are up scaled from SD(Standard Definition)
contents.
•• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
•• Make sure you are watching the TV at the minimum recommended
◀
distance based on the size and definition of the signal.
The picture is distorted: macro
block error, small block, dots,
pixelization
•• Compression of video contents may cause picture distortion especially in
fast moving pictures such as sports and action movies.
•• Low signal level or bad quality can cause picture distortion. This is not a
TV issue.
•• Mobile phones used close to the TV (cca up to 1m) may cause noise in
picture on analogue and digital TV.
English
▶
Issues
Solutions and Explanations
Colour is wrong or missing.
•• If you’re using a component connection, make sure the component
cables are connected to the correct jacks. Incorrect or loose connections
may cause colour problems or a blank screen.
There is poor colour or
brightness.
•• Adjust the Picture options in the TV menu (go to Picture mode / Colour
/ Brightness / Sharpness)
•• Adjust Energy Saving option in the TV menu (go to MENU – System –
Eco Solution – Energy Saving)
•• Try resetting the picture to view the default picture settings (go to MENU
- Picture - Reset Picture)
◀
There is a dotted line on the
edge of the screen.
The picture is black and white.
•• If the picture size is set to Screen Fit, change it to 16:9.
•• Change cable/satellite box resolution.
•• If you are using an AV composite input, connect the video cable (yellow)
to the Green jack of component input 1 on the TV.
When changing channels, the
picture freezes or is distorted or
delayed.
•• If connected with a cable box, please try to reset the cable box.
Reconnect the AC cord and wait until the cable box reboots. It may take
up to 20 minutes.
•• Set the output resolution of the cable box to 1080i or 720p.
English
▶
Issues
Solutions and Explanations
3D for PDP TV
◀
The 3D Active Glasses may
not work properly if there is any
other 3D product or electronic
devices turned on near the
glasses or TV.
•• If there is a problem, keep other electronic devices as far away as
You may notice a small
amount of screen flickering
when watching 3D images in
poor light conditions (from a
strobe light, etc.), or under a
fluorescent lamp (50Hz ~ 60Hz)
or 3 wavelength lamp.
•• If so, dim the light or turn the lamp off.
The ideal viewing distance
should be three times or more
the height of the screen.
•• We recommend sitting with viewer’s eyes on a level with the screen.
If you leave 3D glasses on,
battery lifespan is shortened.
•• Turn off 3D glasses while not using them.
possible from the 3D Active Glasses.
▶
English
Issues
Solutions and Explanations
Sound Quality
First of all, please perform the Sound Test to confirm that your TV audio
is properly operating. (go to MENU - Support - Self Diagnosis - Sound
Test)
If the audio is OK, the sound problem may caused by the source or signal.
◀
There is no sound or the sound
is too low at maximum volume.
•• Please check the volume of the external device connected to your TV.
The picture is good but there is
no sound.
•• Set the Speaker Select option to TV Speaker in the sound menu.
•• If you are using an external device, make sure the audio cables are
connected to the correct audio input jacks on the TV.
•• If you are using an external device, check the device’s audio output
option (ex. you may need to change your cable box’s audio option to
HDMI when you have a HDMI connected to your TV).
•• If you are using a DVI to HDMI cable, a separate audio cable is required.
•• If your TV has a headphone jack, make sure there is nothing plugged into
it.
English
▶
Issues
Solutions and Explanations
The speakers are making an
inappropriate noise.
•• Check the cable connections. Make sure a video cable is not connected
to an audio input.
•• For antenna or cable connections, check the signal strength. Low signal
level may cause sound distortion.
No Picture, No Video
The TV turns off automatically.
•• Ensure the Sleep Timer is set to Off in the Setup menu.
(go to MENU – System – Time)
◀
•• If your PC is connected to the TV, check your PC power settings.
•• Make sure the AC power cord is plugged in securely to the wall outlet
and the TV.
•• When watching TV from an antenna or cable connection, the TV will turn
off after 10 ~ 15 minutes if there is no signal.
English
▶
Issues
Solutions and Explanations
RF (Cable / Antenna) Connection
The TV is not receiving all
channels.
•• Make sure the Antenna cable is connected securely.
•• Please try Plug & Play (Initial setup) to add available channels to the
channel list. Go to MENU - System - Plug & Play (Initial setup) and wait
for all available channels to be stored.
•• Verify the Antenna is positioned correctly.
PC Connection
◀
A “Mode Not Supported”
message appears.
•• Set your PC’s output resolution so it matches the resolutions supported
by the TV.
▶
English
Issues
Solutions and Explanations
“PC” is always shown on the
source list, even if a PC is not
connected.
•• This is normal; “PC” is always shown on the source list, regardless of
The video is OK but there is no
audio.
•• If you are using an HDMI connection, check the audio output setting on
whether a PC is connected.
your PC.
Network Connection
The wireless network connection
failed.
◀
•• The Samsung Wireless USB dongle is required to use a wireless network.
•• Make sure the Network Connection is set to Wireless.
•• Make sure the TV is connected to a wireless IP sharer (router).
English
▶
Issues
Solutions and Explanations
Others
The picture won’t display in full
screen.
•• HD channels will have black bars on either side of the screen when
displaying up scaled SD (4:3) contents.
•• Black bars on the top and bottom will appear during movies that have
aspect ratios different from your TV.
•• Adjust the picture size options on your external device or TV to full
screen.
◀
Plasma TV is making humming
noise. for PDP TV
•• Plasma TVs typically make a soft humming sound. This is normal. It’s
caused by the electrical charges that are used to create the images on
the screen.
•• If the humming sound is loud, you may have set the brightness on the TV
too high. Try setting the brightness lower.
•• You can also have loud humming if the back of your Plasma TV is too
close to a wall or other hard surface. Also try rerouting your connection
cables.
Image Retention (Burn In)
Issue. for PDP TV
•• Improper installation of wall mount can create excessive noise.
•• To minimize the possibility of screen burn, this unit is equipped with
screen burn reduction technology. Pixel Shift technology enables you to
set picture movement up / down (Vertical Line) and side to side (Horizontal
Dot).
English
▶
◀
Issues
Solutions and Explanations
A “Mode Not Supported”
message appears.
•• Check the supported resolution of the TV, and adjust the external
There is a plastic smell from the
TV.
•• This smell is normal and will dissipate over time.
The TV Signal Information is
unavailable in the Self Diagnostic
menu.
•• This function is only available with digital channels from an Antenna / RF/
The TV is tilted to the side.
•• Remove the base stand from the TV and reassemble it.
The channel menu is greyed
out. (unavailable)
•• The Channel menu is only available when the TV source is selected.
Your settings are lost after 30
minutes or every time the TV is
turned off.
•• If the TV is in the Store Demo mode, it will reset audio and picture
device’s output resolution accordingly.
Coax connection.
settings every 30 minutes. Change the settings from Store Demo mode
to Home Use mode in the Plug & Play (Initial setup) procedure. Press
the SOURCE button to select TV mode, and go to MENU → System →
Plug & Play (Initial setup) → ENTERE.
English
▶
Issues
Solutions and Explanations
You have intermittent loss of
audio or video.
•• Check the cable connections and reconnect them.
•• Loss of audio or video can be caused by using overly rigid or thick
cables. Make sure the cables are flexible enough for long term use. If
mounting the TV to the wall, we recommend using cables with 90 degree
connectors.
◀
You see small particles when
you look closely at the edge of
the frame of the TV.
•• This is part of the product’s design and is not a defect.
The PIP menu is not available.
•• PIP functionality is only available when you are using a HDMI, PC or
components source.
English
▶
Issues
Solutions and Explanations
The message “Scramble signal”
or “Weak Signal/No Signal”
appears.
•• If you are using a CAM CARD (CI/CI+), check that it is installed into the
common interface slot.
•• If there is still a problem, pull the CAM CARD out of the TV and insert it
into the slot again.
◀
You turned the TV off 45
minutes ago, and it turned on
again.
•• It is normal. The TV operates the OTA (Over The Aerial) function itself to
There are recurrent picture/
sound issues.
•• Check and change the signal/source.
A reaction may occur between
the rubber cushion pads on the
base stand and the top finish of
some furniture.
•• To prevent this, use felt pads on any surface of the TV that comes in
upgrade firmware downloaded whilst your watching TV.
direct contact with furniture.
English
▶
❑❑ Connecting to a COMMON INTERFACE slot
■■ Attaching the CI Card Adaptor
Attach the adapter as shown below. To connect the CI
CARD Adapter, follow these steps.
NN We recommend attaching the adapter before installing
◀
1. Insert the CI CARD Adapter into the two holes on the
product 1.
NN Please find a two holes on the rear of the TV. A two holes is beside the
COMMON INTERFACE port.
English
TV Rear
▶
2. Connect the CI CARD Adapter into the COMMON INTERFACE port on the
product 2.
3. Insert the “CI or CI+ CARD”
We recommand that you insert the CI card before you mount the TV on a wall. It may be
difficult to insert after the mounting. Insert the card after attaching the CI-Module on TV. It is
difficult to attach the module if you insert the card before attaching.
◀
▶
English
■■ Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
●● If you don’t insert the “CI or CI+ CARD,” some channels
will display the message “Scrambled Signal”.
●● The pairing information containing a telephone number,
◀
the “CI or CI+ CARD” ID the Host ID and other
information will be displayed in about 2~3 minutes. If an
error message is displayed, please contact your service provider.
●● When the configuration of channel information has finished, the message
“Updating Completed” is displayed, indicating the channel list is updated.
English
▶
NN NOTE
●● You must obtain a “CI or CI+ CARD” from a local cable service provider.
●● When removing the “CI or CI+ CARD”, carefully pull it out with your hands
since dropping the “CI or CI+ CARD” may cause damage to it.
●● Insert the “CI or CI+ CARD” in the direction marked on the card.
●● The location of the COMMON INTERFACE slot may be different depending
on the model.
◀
▶
English
●● “CI or CI+ CARD” is not supported in some countries and regions; check
with your authorized dealer.
●● If you have any problems, please contact a service provider.
●● Insert the “CI or CI+ CARD” that supports the current antenna settings. The
screen will be distorted or will not be seen.
◀
▶
English
❑❑ Teletext Feature (depending on the country)
The index page of the Teletext service gives you information on how to use the
service. For Teletext information to be displayed correctly, channel reception must
be stable. Otherwise, information may be missing or some pages may not be
displayed.
NN You can change Teletext pages by pressing the numeric buttons on the remote
control.
◀
▶
English
(Teletext on / mix / off)
Activates the Teletext mode for the current channel. Press the button twice to
overlap the Teletext mode with the current broadcasting screen. Press it one more
time to exit teletext.
8
Stores the Teletext pages.
/
(store)
4
(size)
Displays the teletext on the upper half of the screen in double-size. To move the text
to
the lower half of the screen, press it again. For normal display, press it once again.
9
(hold)
Holds the display at the current page, in the case that there are several secondary
pages that follow automaticially. To undo, press it again.
◀
▶
English
Colour buttons
(red, green, yellow, blue)
If the FASTEXT system is used by the broadcasting company, the different topics
on a Teletext page are colour-coded and can be selected by pressing the coloured
buttons. Press the colour corresponding to the topic of your choice. A new
colourcoded page is displayed. Items can be selected in the same way. To display
the previous or next page, press the corresponding coloured button.
(mode)
Selects the Teletext mode (LIST / FLOF).If pressed during LIST mode, switches the
mode to List save mode. In List save mode, you can save a Teletext page into a list
using the 8 (store) button.
1
Displays the available sub-page.
0
(sub-page) (size)
◀
2
Displays the next Teletext page.
(page up)
English
▶
3
Displays the previous Teletext page.
(page down)
6
Displays the index (contents) page at any time while you are viewing Teletext.
(index)
(reveal)
Displays the hidden text (answers to quiz games, for example). To display the
normal screen, press it again.
7
Shrinks the Teletext display to overlap with the current broadcast.
5
(cancel)
◀
▶
English
Typical Teletext page
Part
◀
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information. FASTEXT information.
English
▶
❑❑ Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung.
It is a device used to physically fix the system
when using it in a public place. The appearance
and locking method may differ from the illustration
depending on the manufacturer. Refer to the
manual provided with the Kensington Lock for
additional information on proper use.
◀
<TV Rear>
1
<Optional>
NN Please find a “K” icon on the rear of the TV. A Kensington slot is beside the “K”
icon.
English
▶
To lock the product, follow these steps:
1. Wrap the Kensington Lock cable around a large, stationary object such as desk
or chair.
2. Slide the end of the cable with the lock attached through the looped end of the
Kensington Lock cable.
3. Insert the locking device into the Kensington slot on the product 1.
4. Lock the lock.
◀
NN These are general instructions. For exact instructions, see the User manual
supplied with the locking device.
NN The locking device has to be purchased separately.
NN The location of the Kensington slot may be different depending on the TV
model.
English
▶
❑❑ Licence
TheaterSound, SRS and
symbol are trademarks of SRS Labs, Inc.
TheaterSound technology is incorporated under licence from SRS Labs, Inc.
Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
◀
Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and
the Symbol are registered trademarks. & DTS 2.0+ Digital Out and the DTS logos are
trademarks of DTS, Inc. Product Includes software. © DTS, Inc. All Rights Reserved.
English
▶
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are used
under licence.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified®
device that plays DivX video. Visit www.divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD
section in your device setup menu. Go to vod.divx.com for more information on how to complete your
registration.
◀
Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
Open Source Licence Notice is written only English.
English
e-Manual Guide
❑❑ How to view the e-Manual
You can read the introduction and instructions
about the TV features stored in your TV.
Basic Features
Changing the Preset Picture Mode
OO MENUm → Support → e-Manual →
Adjusting Picture Settings
ENTERE
Changing the Picture Size
Changing the Picture Options
Setting up the TV with Your PC
Help
Index
▶
English
Screen Display
Current on-air
broadcasting.
Change the category.
Press l or r button
to select category you
want.
Basic Features
Changing the Preset Picture Mode
Displays the sub-menu list.
Press ENTERE button to
select sub-menu you want.
Adjusting Picture Settings
Changing the Picture Size
◀
Changing the Picture Options
Setting up the TV with Your PC
Index
Help
Operation Buttons:
Help: Displays the e-Manual
Guide or Product guide.
Press ENTERE button.
Index: Displays index screen.
X: Exit the e-Manual.
English
▶
Using the Help
Display the e-Manual Guide & the Product Guide by pressing Help.
❑❑ How to view the e-Manual
You can read the introduction and
instructions about the TV features stored in
your TV.
OO MENUm → Picture → Picture Mode
→ ENTERE
Sync media from multiple devices with AllShare
Basic Features
AllShareTM syncs your digital devices so you can
enjoy music, movies and photos from your PC,
camera and mobile devices, on your larger TV
screen. Connects you to multiple PCs, as well.
Changing the Preset Picture Mode
Adjusting Picture Settings
Changing the Picture Size
Changing the Picture Size
Changing the Picture Size
Help
◀
Return
Return
<e-Manual Guide>
The e-Manual guide appears as above.
Return
<Product Guide>
The product guide appe ars as above.
English
▶
How to toggle between the e-Manual and the corresponding menu(s).
Picture
❑❑ Changing the Preset Picture Mode
Picture Mode
OO MENUm → Picture → Picture Mode → ENTERE
■■ Picture Mode t
Select your preferred picture type.
E-MANUAL
NN When an input source is set to PC, the Picture Mode is only available the
Standard and Entertain.
●● Dynamic: Suitable for a bright room.
Standard
Backlight
14
Contrast
99
Brightness
45
Sparpness
50
Colour
50
●● Standard: Suitable for a normal environment.
●● Natural for LED TV / Relax For PDP TV : Suitable for reducing eye strain.
Try Now
●● Movie: Suitable for watching movies in a dark room.
●● Entertain: Suitable for watching movies and games.
Tint (G/R)
Help
◀
Try Now
Home
Zoom
G 50
R 50
Index
●● The displayed menu may differ
depending on the model.
Method 1
1.Select Try Now, if you want to execute the
corresponding menu(s).
2. To return to the e-Manual screen, press the
E-MANUAL button.
Method 2
1. Press the ENTERE button when selecting
Contents Area. The “Do you want to execute
this?” is displayed. Select Yes and then press
the ENTERE button. The OSD window will be
displayed.
2. To return to the e-Manual screen, press the
E-MANUAL button.
English
▶
Viewing the Contents
❑❑ Changing the Preset Picture Mode
OO MENUm → Picture → Picture Mode → ENTERE
■■ Picture Mode t
Select your preferred picture type.
NN When
an input source is set to PC, the Picture Mode is only
available the Standard and Entertain.
Contents Area: You can view
the corresponding contents, if
you selected a sub-menu. To
move previous or next page,
press the l or r button.
●● Dynamic: Suitable for a bright room.
●● Standard: Suitable for a normal environment.
●● Natural for LED TV / Relax For PDP TV : Suitable for reducing eye
strain.
◀
●● Movie: Suitable for watching movies in a dark room.
●● Entertain: Suitable for watching movies and games.
Help
Try Now
Home
Zoom
Index
Try Now: Displays the corresponding menu(s).
Home: Moves to the e-Manual home screen.
Zoom: Magnifies a screen.
Index: Displays index screen.
English
▶
Using the Zoom mode
When you view the e-Manual instruction, select
the Zoom to magnify the screen. You can scroll
through the magnified screen by using the u or
d buttons.
NN To return to the previous screen, press the
RETURN button.
❑❑ Changing the Preset Picture Mode
OO MENUm → Picture → Picture Mode → ENTERE
■■ Picture Mode t
Select your preferred picture type.
NN When
an input source is set to PC, the Picture Mode is only
available the Standard and Entertain.
●● Dynamic: Suitable for a bright room.
●● Standard: Suitable for a normal environment.
●● Natural for LED TV / Relax For PDP TV : Suitable for reducing eye
Return
◀
▶
English
How to search a keyword by using index page
1. If you want to search a keyword, select Index to open the Index screen.
2. Press the l or r button to select a character order you want, and then press
the ENTERE button.
3. Press the u or d button to select a keyword you want to see, and then press
the ENTERE button.
4. You can view the corresponding e-Manual instruction screen.
◀
NN To close the Index screen, press the Close button.
English
Download PDF