Samsung | DVD-R120 | Samsung DVD-R120 Benutzerhandbuch

1-00687A-R120-UK_Cover
3/10/05
5:14 PM
Page 1
Instruction Manual
DVD-R120
DVD-R121
DVD-R122
AK68-00687A-00
Getting Started
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 2
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT NOTE
The mains lead on this equipment is supplied with a
moulded plug incorporating a fuse. The value of the
fuse is indicated on the pin face of the plug. If it requires
replacing, a fuse approved to BS1362 of the same
rating must be used.
Never use the plug with the fuse cover omitted if the cover
is detachable. If a replacement fuse cover is
required, it must be of the same colour as the pin face of
the plug. Replacement covers are available from your
dealer.
If the fitted plug is not suitable for the power points in your
house or the cable is not long enough to reach a
power point, you should obtain a suitable safety approved
extension lead or consult your dealer for assistance.
This symbol indicates “dangerous
voltage” inside the product that presents
a risk of electric shock or personal injury.
However, if there is no alternative to cutting off the plug,
remove the fuse and then safely dispose of the
plug. Do not connect the plug to a mains jack, as there is a
risk of shock hazard from the bared flexible cord.
This symbol indicates important
instructions accompanying the product.
The product unit accompanying this user manual is
licensed under certain intellectual property rights of certain
third parties. This license is limited to private noncommercial use by end-user consumers for licensed
contents.
No rights are granted for commercial use.
The license does not cover any product unit other than this
product unit and the license does not extend to any
unlicensed product unit or process conforming to ISO/IEC
11172-3 or ISO/IEC 13818-3 used or sold in combination
with this product unit. The license only covers the use of
this product unit to encode and/or decode audio files
conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
No rights are granted under this license for product features
or functions that do not conform to the ISO/IEC 11172-3 or
ISO/IEC 13818-3.
Do not install this equipment in a confined space
such as a bookcase or similar unit.
WARNING : To prevent damage which may result in
fire or electric shock hazard, do not
expose this appliance to rain or
moisture.
CAUTION : DVD RECORDER USES AN INVISIBLE
LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE
IF DIRECTED.
BE SURE TO OPERATE RECORDER
CORRECTLY AS INSTRUCTED.
CAUTION
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
CAUTIONS
Caution: To prevent electric shock, match wide blade
of plug to wide slot, fully insert.
Attention: Pour éviter les chocs électriques,
introduíre la lame la plus large de la fiche
dans la borne correspondante de la prise
et pousser jusqu au fond.
This product satisfies FCC regulations when shielded
cables and connectors are used to connect the unit
to other equipment. To prevent electromagnetic
interference with electric appliances, such as radios
and televisions, use shielded cables and connectors
for connections.
2- English
WARNING: DO NOT CONNECT EITHER WIRE TO THE
EARTH TERMINAL WHICH IS MARKED WITH
THE LETTER BY THE EARTH SYMBOL, OR
COLOURED GREEN OR GREEN AND YELLOW.
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 3
●
●
Important Safety Instructions
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two
blades with one wider than the other. A groundingtype plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. if the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Handling Cautions
●
●
●
●
●
Before connecting other components to this recorder,
be sure to turn them all off.
Do not move the recorder while a disc is being
played, or the disc may be scratched or broken, the
recorder’s internal parts may be damaged.
Do not put a flower vase filled with water or any small
metal objects on the recorder.
Be careful not to put your hand into the disc tray.
Do not place anything other than the disc in the disc
tray.
●
●
Exterior interference such as lightning and static
electricity can affect normal operation of this recorder.
If this occurs, turn the recorder off and on again with
the STANDBY/ON button, or disconnect and then
reconnect the AC power cord to the AC power outlet.
The recorder will operate normally.
Be sure to remove the disc and turn off the recorder
after use.
Disconnect the AC power cord from the AC outlet
when you don’t intend to use the recorder for long
periods of time.
Clean the disc by wiping in a straight line from the
inside to the outside of the disc.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power
cord from the AC outlet.
● Do not use benzene, thinner, or other solvents for
cleaning.
● Wipe the cabinet with a soft cloth.
Disc Handling
●
Use discs with regular
shapes. If an irregular disc
(a disc with a special shape)
is used, this DVD recorder may be damaged.
Holding discs
●
Avoid touching the surface of a
disc where recording is performed.
DVD-RAM, DVD-RW and DVD-R
●
Clean with an optional DVDRAM/PD disc cleaner (LFK200DCA1 where available).
Do not use cleaners or cloths
for CDs to clean DVDRAM/DVD-RW/DVD-R discs.
DVD-Video, Audio CD
●
Wipe off dirt or contamination on the disc with a soft
cloth.
Cautions on handling discs
●
●
●
●
●
●
Do not write on the printed side with a ball-point pen
or pencil.
Do not use record cleaning sprays or antistatic.
Also, do not use volatile chemicals, such as benzene
or thinner.
Do not apply labels or stickers to discs. (Do not use
discs fixed with exposed tape adhesive or leftover
peeled-off stickers.)
Do not use scratch-proof protectors or covers.
Do not use discs printed with label printers available
on the market.
Do not load warped or cracked discs.
English -3
Getting Started
Precaution
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 4
Getting Started
Disc Storage
Be careful not to harm the disc because the data on
these discs is highly vulnerable to the environment.
● Do not keep under direct sunlight.
● Keep in a cool ventilated area.
● Store vertically.
● Keep in a clean protection jacket.
● If you move your DVD recorder suddenly from a cold
place to a warm place, condensation may generate
on the operating parts and lens and cause abnormal
disc playback. If this occurs, remove the disc and
wait for one to two hours with the power on before
atttempting playback.
Using CD-R/RW
●
●
●
Use a 700MB(80 minutes) CD-R/RW disc. If possible,
do not use a 800MB(90 minutes) or above disc, as
the disc may not play back.
If the CD-R/RW disc was not recorded as a closed
session, you may experience a delay in the early
playback time, all recorded files may not play.
Some CD-R/RW discs may not be playable with this
unit, depending on the device which was used to
burn them. For contents recorded on CD-R/RW
media from CDs for your personal use, playability
may vary depending on contents and discs.
Using MPEG4 disc
Disc Specifications
●
●
DVD-Video
●
●
●
●
A digital versatile disc (DVD) can contain up to
135-minutes of images, 8 audio languages and 32
subtitle languages. It is equipped with MPEG-2
picture compression and Dolby digital surrounding,
allowing you to enjoy vivid and clear theater quality
images in the comfort of your own home.
When switching from the first layer to the second
layer of a dual-layered DVD Video disc, there may be
momentary distortion in the image and sound.
This is not a malfunction of the unit.
Once a DVD-R/RW recorded in Video Mode is
finalised, it becomes DVD-Video.
Audio CD
●
●
An audio disc on which 44.1kHz PCM Audio is
recorded
Plays CD-DA format audio CD-R and CD-RW discs.
The unit may not be able to play some CD-R or CDRW discs due to the condition of the recording.
●
●
DVD-R Disc Playback and Recording
●
●
●
●
●
CD-R/RW
MP3 CD-R/RW
●
●
●
●
●
Only CD-R discs with MP3 files recorded with
ISO9660 or JOLIET format can be played back
Only MP3 files with the ".mp3", ".MP3" extension can
be used.
For MP3 files recorded with a VBR(Variable Bit
Rates), from 32 Kbps to 320 Kbps, the sound may
cut in out.
Playable bitrate range is from 56Kbps to 320Kbps.
The unit can handle a maximum of 1,000 files and
100 folders.
JPEG CD-R/RW
●
●
●
●
Only JPEG files with the ".jpg", ".JPG" extension can
be used.
The unit can handle a maximum of 1,000 files and
100 folders.
Maximum size of progressive JPEG is 3M pixels.
MOTION JPEG is not supported.
4- English
Disc : CD-R/RW, DVD-R/RW/RAM
MPEG4 File with following extensions can be played.
: .avi, .mpg, .mpeg, .divx, .AVI, .MPEG, .DIVX
(Except .MPG)
MPEG4 Codec format : DivX 3.11 DivX 4.x DivX 5.x
DivX-Pro, XviD
Available Audio Format : “MP3”, “MPEG”, “WMA”,
“LPCM”, “AAC”, “Ogg”
Supported subtitle file formats: .smi, .srt, .psb, .txt, .ass
●
●
Once a DVD Recorder in Video Mode is finalised, it
becomes DVD-Video.
You can record onto the available space on the disc
and perform editing functions such as giving titles to
discs and programmes and erasing programmes
before finalising.
When programming is erased from a DVD-R, that
space does not become available. Once an area on a
DVD-R is recorded on, that area is no longer a
vailable for recording, whether the recording is
erased or not.
It takes about 30 seconds for the unit to complete
recording management information after recording
finishes.
This product optimizes the DVD-R for each recording.
Optimizing is carried out when you start recording
after inserting the disc or turning on the unit.
Recording onto the disc may become impossible if
optimizing is carried out too many times.
Playback may be impossible in some cases due to
the condition of recording.
This unit can play back DVD-R discs recorded and
finalised with a Samsung DVD video recorder. It may
not be able to play some DVD-R discs depending on
the disc and the condition of the recording.
DVD-RW Disc Playback and Recording
●
●
●
●
●
Recording and playback can be performed on DVDRW discs in both the Video and VR Modes.
Once a DVD-RW recorded in both the Video and VR
Modes is finalised, you cannot perform addtional
recording.
Once a DVD-RW recorded in Video Mode is finalised,
it becomes DVD-Video.
In both modes, playback can be performed before
and after finalisation, but additional recording,
deleting and editing can not be performed after
finalisation.
If you want to record the disc in VR Mode and then
record in V Mode, be sure to execute Format.
Be careful when executing Format because all the
recorded data may be lost.
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 5
A DVD-RW blank disc is initialized to VR Mode when
first initialized.
●
DVD-RW (VR mode)
- This is a format that is used for recording data on a
DVD-RAM or DVD-RW disc.
You can record multiple titles, edit, delete, partial
delete, create a playlist, etc.
- A disc that is recorded in this mode may not be
played by existing DVD Recorder.
DVD-RW (Video mode)
- This is a format that is used for recording data on a
DVD-RW or DVD-R disc. The disc can be played
by existing DVD Recorder once it has been
finalised.
- If a disc that has been recorded in Video Mode by a
different maker’s recorder but has not been
finalised, it cannot be played or additionally be
recorded by this recorder.
●
✻ Use of poor quality DVD-RAM/DVD-RW/DVD-R discs
may cause following unexpected problems including,
without limitation, recording failure, loss of recorded
or edited materials or damage to the recorder.
Do not use the following discs!
●
●
DVD-RAM Disc Playback and Recording
●
●
●
●
●
●
Ensure that the recording mode is set to VR mode.
Otherwise, this product will not be able to play the
recording.
You cannot play a DVD-RAM in most DVD components
due to compatibility issues.
Only DVD-RAM standard Version 2.0. discs can be
played in this unit.
DVD-RAM recorded on this unit may not work with other
DVD components. To determine compatibility with these
DVD-RAM discs, refer to the user’s manual for the
player.
For cartridge type DVD-RAM discs, remove the cartridge
and use the disc only.
COPY PROTECTION
●
●
Many DVD discs are encoded with copy protection.
Because of this, you should only connect your DVD
recorder directly to your TV, not to a VCR.
Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorised by Macrovision
Corporation, is intended for home and other limited
viewing uses only unless otherwise
authorised by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Protection
LD, CD-G, CD-I, Video-CD, CD-ROM, DVD-ROM,
DVD+R and DVD+RW discs should not be used in
this product.
[Note]
Disc types that can be played : CD/CD-R/CDRW/MP3/JPEG/DVD-Video/DVD-RAM/DVD-RW/
DVD-R. For a DVD-R/DVD-RW disc, which has been
recorded in Video Mode on another component, it
can play only when finalised.
Some commercial discs and DVD discs purchased
outside your region may not be playable with this
product. When these discs are played, either “No disc."
or "Please check the regional code." will be displayed.
If your DVD-RW disc is an illegal copy or is not in
DVD video format, it may also not be playable.
❇ We recommend using one of the discs in the
table as they have been confirmed to be
compatible with this unit. Other discs may not
perform correctly.
Media
Disc
TDK
Beall
DVD-R
That’s
Maxell
Panasonic
TDK
Maxell
DVD-RW Optodisc
Radius
Verbatim
Maxell
Fujifilm
DVD-RAM
TDK
Panasonic
Disc
DVD-RAM
DVD-RW
DVD-R
●
SPEED
4x
4x
4x
4x
4x
2x
2x
2x
2x
2x
3x
3x
2x
3x
Maximum no. of recordings by disc type
100,000
1,000
1
We take no responsibility and offer no compensation
for any recording failure, loss of recorded or edited
material and/or damage to the recorder arising from
usage of unrecommended discs.
This DVD Recorder can allow you to protect the
contents of your discs, as described below.
● Programme-protected: See page 73
“Locking(Protecting) a Title”
● Disc-protected: See page 85 “Disc Protection”
✻ DVD-RAM/DVD-RW/DVD-R discs that are
incompatible with the DVD-VIDEO format cannot be
played with this product.
✻ For more information on DVD recording compatibility,
consult your DVD-RAM/DVD-RW/DVD-R
manufacturer.
English -5
Getting Started
●
Getting Started
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 6
Contents
Case 2 : Connecting to an S-Video output jack.............21
Case 3 : Component Video output jacks........................21
Other type of connecting the Audio output cable ..22
Case 1 : Connecting to your TV......................................22
Case 2 : Connecting to a stereo amplifier
Getting Started
with AV output jacks..........................................22
Case 3: Connecting to an AV amplifier with a digital
Warning........................................................................2
output jack ..........................................................23
Precaution ...................................................................3
Connecting to AV 3 IN, DV input jack...................23
Important Safety Instructions.............................................3
Handling Cautions..............................................................3
Maintenance of Cabinet.....................................................3
Disc Handling .....................................................................3
Case 1 : Connecting a VCR, Set-Top Box(STB), DVD
player or Camcorder to the AV 3 IN jacks.......23
Case 2 : Connecting a Camcorder to the DV IN jack
(only DVD-R120/DVD-R121)...........................24
Disc Storage .......................................................................4
Disc Specifications .............................................................4
System Setup
General Features........................................................8
On-Screen Menu Navigation..................................25
Before reading the user’s manual .........................9
Plug & Auto Set up ..................................................26
How to use the DVD Recorder.................................9
Setting the Clock......................................................27
Unpacking .................................................................11
Presetting Channels with the
Accessories.......................................................................11
Auto Setup function ................................................28
Preparing the Remote Control.........................................11
Presetting Channels with
Setting the Remote Control .............................................11
the Manual Setup function .....................................29
Description................................................................13
Setting Up the Language Options ........................30
Front Panel (DVD-R120) .................................................13
EP Mode Time Setting.............................................31
Front Panel Display (DVD-R120)....................................13
Automatic Chapter Creation ..................................32
Front Panel (DVD-R121) .................................................14
Setting up the Front Display Options...................33
Front Panel Display (DVD-R121)....................................14
Setting up NICAM Options.....................................34
Front Panel (DVD-R122) .................................................15
DivX(R) Registration................................................34
Front Panel Display (DVD-R122)....................................15
Setting up the Audio Options ................................35
Rear Panel........................................................................16
Tour of the Remote Control .............................................17
Connecting & Setting Up
Audio Options...................................................................35
Setting up Video Output Options..........................36
Setting up the Progressive scan...........................37
Canceling the Progressive scan ...........................37
Quick Overview ........................................................18
Setting up the Display(Video) Options.................38
Connecting the DVD-Recorder .................................19
Display(Video) Options ....................................................38
Additional connections...........................................19
Setting up the Parental Control.............................39
Other type of connecting the Video output cable ...20
If you forget your password.............................................39
Case 1 : Connecting to a Video (Composite)
output jack .........................................................20
6- English
About the Rating Level ....................................................40
About the Change Password ..........................................40
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 7
Recording
Selecting the Audio language..........................................60
Before Recording.....................................................41
Recordable discs..............................................................41
Recording Formats ..........................................................42
Recording Mode...............................................................42
Unrecordable video..........................................................42
About INFO Key...............................................................43
Checking the available disc space
(Disc Information).............................................................43
Zooming-In........................................................................61
Using Bookmarks.............................................................61
Using Markers ..................................................................62
Playing an Audio CD/MP3 .....................................63
Playing an Audio CD (CD-DA)/MP3 ...............................63
Playing a Picture ......................................................67
Playing a MPEG4 .....................................................68
Playing the Title List................................................69
Recording the current TV programme you are
watching ....................................................................43
Editing
Recording from external equipment you are
watching ....................................................................45
Copying from a Camcorder
(only DVD-R120/DVD-R121) ...................................46
Making a One Touch Recording (OTR)................47
Making a Timer Recording .....................................48
Flexible Recording (for Timer recording only) ...49
Editing the Scheduled Record List.......................49
Deleting the Scheduled Record List.....................50
Using the Video Plus+ Feature .............................51
Video Plus+ Extended.............................................52
Recording the Standard Timer List ......................52
Basic Editing (Title List) ...................................................72
Renaming(Labeling) a Title..............................................72
Locking(Protecting) a Title ...............................................73
Deleting a Title .................................................................73
Deleting a Section of a Title ............................................74
Advanced Editing (Playlist) .............................................76
Creating a Playlist ...........................................................76
Playing Entries in the Playlist .........................................77
Renaming a Playlist Entry ...............................................78
Editing a Scene for the Playlist .......................................79
Copying a Playlist Entry to the Playlist ...........................82
Deleting a Playlist Entry from the Playlist.......................83
Playback
Disc Manager ..............................................................84
Editing the Disc Name .....................................................84
Before Playing ..........................................................53
Region code (DVD-Video only).......................................53
Disc types that can be played .........................................53
Discs that cannot be played ............................................53
Playing a Disc...........................................................54
Disc Protection .................................................................85
Formatting a Disc.............................................................85
Delete All Title Lists ..........................................................86
Finalising a disc................................................................87
Unfinalising a disc (V/VR mode) ....................................88
Using the Disc & Title Menu............................................55
Using the Search Functions ............................................55
Additional Information
Slow Motion Play..............................................................56
Step Motion Play..............................................................56
About ANYKEY ................................................................56
Using the Repeat Function..............................................57
Troubleshooting.......................................................89
Specifications...........................................................93
Warranty ....................................................................94
Selecting the Subtitle .......................................................59
English -7
Getting Started
Changing the Camera Angle...........................................60
Getting Started
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 8
General Features
The DVD Recorder allows you to record and play high
quality digital video on DVD-RAM/DVD-RW/DVD-R
discs. You can record and edit digital images on DVDRAM/DVD-RW/DVD-R discs as if they were VCR tapes.
High quality digital audio and video recording
and playback
Record up to 16-hours of video with a double sided 9.4
GB DVD-RAM disc, up to 8-hours of images with a 4.7
GB DVD-RAM/DVD-RW/DVD-R disc,
depending on the recording mode.
High quality progressive scan
Progressive scanning provides high resolution and
flicker free video. The 10-bit 54-MHz DAC and 2D Y/C
Separating Circuitry provides the highest image
playback and recording quality. (See pages 21, 37)
A variety of functions with an easy-to-use user
interface
The integrated menu system and the messaging
function allow you to perform desired operations both
easily and conveniently. With a DVD-RAM or DVD-RW
disc, you can edit recorded video, create a playlist, edit
video in a specific sequence according to your
requirements.
MPEG4 playback
This DVD Recorder can play MPEG4 formats within an
avi file.
DivX Certification
Selectable Recording Mode
You can set your recorder to one of four different
recording speeds, each varying in recording quality and
length. EP(6Hr or 8Hr) mode yields the most recording
time, LP & SP modes provide less recording time with
higher quality recording, XP mode gives you the highest
quality recording.
Automated Quality Adjustment for Timer
Recording
If FR mode is selected, the video quality is adjusted
automatically so that all video for the scheduled time
can be recorded onto the free disc space.
(See page 49.)
Creating a DVD video title using
DVD-RW/DVD-R disc
With the DVD Recorder, you can create your own DVD
Video titles on 4.7 GB DVD-RW/DVD-R discs.
Copying data from a digital camcorder using a
DV input jack (only DVD-R120, DVD-R121)
Record DV Device video onto DVD-RAM or DVD-RW,
DVD-R discs using the DV input jack (IEEE 13944pin/4pin). (See page 46.)
8- English
DivX, DivX Certified, and associated
logos are trademarks of DivXNetworks,
Inc and are used under license.
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 9
Make sure to check the following terms before
reading the user’s manual.
Icons that will be used in manual
Icon
Term
Definition
DVD
This involves a function available
in DVD or DVD-R/DVD-RW
discs that have been recorded
and finalised in Video Mode.
RAM
This involves a function available
in DVD-RAM.
RW
This involves a function available
in DVD-RW.
R
This involves a function available
in DVD-R.
CD
This involves a function available
in a data CD (CD-R or CD-RW).
JPEG
This involves a function available
in a data picture CD (CD-R or
CD-RW).
MP3
This involves a function available
in a data CD (CD-R or CD-RW
on which MP3 is recorded).
MPEG4
This involves a function available
in a data CD-R/RW,DVD-R,
RW,RAM.
Caution
This involves a case where a
function does not operate or
settings may be cancelled.
NOTE
This involves tips or instructions
on the page that help each
function operate.
One-Touch A function that can be operat
button
by using only one button.
ANYKEY A function that can be operated
button
by using Any Key button.
About the use of this user’s manual
1) Be sure to be familiar with Safety Instructions before
using this product. (See pages 2~5)
2) If a problem occurs, check for Troubleshooting.
(See pages 89~92)
How to use the DVD
Recorder
Step 1
Select the disc type
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc or
you want to edit the disc after recording, select a
rewritable DVD-RW or DVD-RAM type disc.
If you want to save recording without any change,
choose a non-rewritable DVD-R.
Step 2
Format the disc to start recording
Unlike a VCR, the recorder automatically starts
formatting when an unused disc is inserted. This is
required for the preparation of recording on a disc.
Using a DVD-RAM
This type of disc can be formatted in DVD-Video
Recording format (VR mode). You can edit recorded
image and create a playlist and edit images in a
specific sequence according to your requirements.
Using a DVD-RW
This type of disc can be formatted in either DVD-Video
format (Video mode) or DVD-Video Recording format
(VR mode). For an unused disc, a message that asks
whether to format in VR Mode or not is displayed.
You can play a Video mode disc on various DVD
components. A VR mode disc allows more varied
editing.
Using a DVD-R
This type of disc can be formatted in DVD Video
format. After formatting is complete, you can record on
the disc. You can play this type of discs on various
DVD components only when they have been finalised.
■
You can only use either the VR or
Video mode on a DVD-RW, but not
both at the same time.
■
You can change the DVD-RW
format to another format by
reinitializing. It should be noted that
the disc's data will be lost when
changing formats.
NOTE
Copyright
©2005 Samsung Electronics Co.
All rights reserved; No part or whole of this user’s
manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.
Getting Started
Before reading the user’s
manual
English -9
1-00687A-R120-UK_02~18
Getting Started
Step 3
3/10/05
5:15 PM
Page 10
Recording
There are two different recording methods, Direct
Recording and Timer Recording. Timer recording is
classified as a Date : Once(dd/mm(MON)), Every Day,
MON-SAT, MON-FRI, Every SAT, etc.
Recording mode : XP (high quality mode), SP (standard
quality mode), LP (long recording mode), and EP
(extended mode) according to the recording mode. When
recording is set in the FR mode, the best quality picture is
recorded with regards to the remaining time on the disc.
Step 4
Playing
You can select the title you want to play in a displayed
menu and then immediately start playback.
A DVD consists of sections called titles, and sub
sections called chapters.
During recording, a title is created between two points
where you start and stop recording. Chapters will be
created automatically when you finalise recording on
DVD-R / DVD-RW discs in Video mode with the
Chapter Creator set to On. The chapter’s length
(interval between chapters) varies according to the
recording mode.
Step 5
Editing a recorded disc
Editing on discs is easier than conventional video
tapes. The recorder supports many different edit
functions, possible only with DVDs.
With a simple and easy edit menu, you can operate
various edit functions, such as delete, copy, rename,
lock, etc., on a recorded title.
Creating a playlist (DVD-RAM/-RW in VR mode)
With this recorder, you can create a new playlist on the
same disc and edit it without the change of the original
recording.
10- English
Step 6
Finalising & Playing on other DVD components
To play your DVD on other DVD components,
finalising may be necessary. First, finish all editing and
recording operations, then finalise the disc.
When using a DVD-RW disc in VR Mode
Although finalising is generally unnecessary when
playing the disc on a VR Mode compatible component,
a finalised disc should be used for playback.
When using a DVD-RW disc in Video Mode
The disc should be finalised first to enable playback on
anything other than this recorder. No more editing or
recording can be made on the disc once it has been
finalised.
When using a DVD-R disc
You should finalise the disc to play it on a component
other than this recorder. You cannot edit or record on
the disc once it has been finalised.
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 11
Getting Started
Unpacking
Accessories
Setting the Remote Control
Check for the supplied accessories below.
You can control certain functions of another
manufacturer’s TV with this remote control.
Control function buttons involve: STANDBY/ON,
PROG / , TV VOL +/-, Direct Number buttons,
TV MUTE, INPUT button.
Video/Audio Cable
Remote Control
Instruction Manual
RF Cable for TV
Batteries for Remote
Control (AAA Size)
Quick Guide
Preparing the Remote Control
Install Batteries in the Remote Control
●
●
●
Open the battery cover on the back of the remote
control.
Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
Replace the battery cover.
If the remote does not operate properly:
●
●
●
●
Check the polarity + - of the batteries (Dry-Cell)
Check if the batteries are drained.
Check if remote sensor is blocked by obstacles.
Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local
environmental regulations. Do not put them in the
household trash.
English -11
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 12
Getting Started
To determine whether your television is
compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the STANDBY/ON button and enter
the two-figure code corresponding to the brand of
your television, by pressing the appropriate number
buttons.
Controllable TV Codes
BRAND
SAMSUNG
AIWA
ANAM
BANG & OLUFSEN
BLAUPUNKT
BRANDT
BRIONVEGA
CGE
CONTINENTAL EDISON
DAEWOO
EMERSON
FERGUSON
FINLUX
FORMENTI
FUJITSU
GRADIENTE
GRUNDIG
HITACHI
IMPERIAL
JVC
LG
LOEWE
LOEWE OPTA
MAGNAVOX
METZ
MITSUBISHI
MIVAR
NEC
NEWSAN
NOBLEX
NOKIA
NORDMENDE
PANASONIC
PHILIPS
PHONOLA
PIONEER
RADIOLA
RADIOMARELLI
RCA
REX
SABA
SALORA
SANYO
SCHNEIDER
12- English
BUTTON
01, 02, 03, 04, 05, 06, 07, 08, 09
82
10, 11, 12, 13, 14, 15, 16, 17, 18
57
71
73
57
52
75
19, 20, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34
64
73
06, 49, 57
57
84
70
49, 52, 71
60, 72, 73, 75
52
61, 79
06, 19, 20, 21, 22, 78
06, 69
06, 57
40
57
06, 48, 62, 65
52, 77
83
68
66
74
72, 73, 75
53, 54, 74, 75
06, 55, 56, 57
06, 56, 57
58, 59, 73, 74
06, 56
57
45, 46
74
57, 72, 73, 74, 75
74
41, 42, 43, 44, 48
06
BRAND
SELECO
SHARP
SIEMENS
SINGER
SINUDYNE
SONY
TELEAVA
TELEFUNKEN
THOMSON
THOMSON ASIA
TOSHIBA
WEGA
YOKO
ZENITH
BUTTON
74
36, 37, 38, 39, 48
71
57
57
35, 48
73
67, 73, 75, 76
72, 73, 75
80, 81
47, 48, 49, 50, 51, 52
57
06
63
Result: If your television is compatible with the remote
control, it will switch off.
It is now programmed to operate with the
remote control.
■
If several codes are indicated for your
television brand, try each one in turn until
you find one that works.
■
If you replace the remote control's
batteries, you must set the brand code
again.
NOTE
Then you can control the television using the
following buttons after the TV button.
Button
STANDBY/ON
INPUT
TV VOL(+ or -)
PROG. ( or )
TV MUTE
0~9
■
NOTE
Function
Used to switch the television on and off.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the desired channel.
Used to toggle the sound on and off.
Used to input number directly.
The various functions will not necessarily
work on all televisions. If you encounter
problems, operate the television directly.
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 13
Getting Started
Description
Front panel (DVD-R120)
1
4
2
3
1. STANDBY/ON
Turns the recorder on and off.
2. AV3 INPUT
Connect external equipment.
3. DV-INPUT
Connect external digital equipment with a DV
jack. (such as a camcorder)
4. DISC TRAY
Opens to accept a disc.
5. OPEN/CLOSE
Opens and closes the disc tray.
6. DISPLAY
Displays the playing status, title/ chapter/ time,
etc.
6
5
8 7
9
12
10
11
7. SEARCH/SKIP
Goes to the next title/chapter/track or goes back
to the previous title/chapter/track.
8. STOP
Stops disc playback.
9. PLAY/PAUSE
Plays a disc or pauses playback or recording.
10. P.SCAN
Selects the progressive scan mode.
11. REC
Starts recording.
12. PR (
)
Select TV preset Channels.
Same as PROG button on the remote control.
Front Panel Display (DVD-R120)
1. Lights when a disc is loaded.
2. Lights in the record mode.
3. Lights to indicate the timer record mode.
4. Lights when a -R/RW/RAM disc is loaded.
5. Playing time/clock/current status indicator.
6. Lights in the progressive scan mode.
English -13
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 14
Getting Started
Front panel (DVD-R121)
1. STANDBY/ON
Turns the recorder on and off.
2. AV3 INPUT
Connect external equipment.
3. DV-INPUT
Connect external digital equipment with a DV
jack. (such as a camcorder)
4. DISC TRAY
Opens to accept a disc.
5. OPEN/CLOSE
Opens and closes the disc tray.
6. P.SCAN
Selects the progressive scan mode.
7. DISPLAY
Displays the playing status, title/ chapter/ time, etc.
8. SEARCH/SKIP
Goes to the next title/chapter/track or goes back
to the previous title/chapter/track.
9. STOP
Stops disc playback.
10. Remote Control Reciever
11. PR (
)
Select TV preset Channels.
Same as PROG button on the remote control.
12. REC
Starts recording.
13. PLAY/PAUSE
Plays a disc or pauses playback or recording.
Front Panel Display (DVD-R121)
1. Lights in the record mode.
2. Lights to indicate the timer record mode.
3. Lights in the progressive scan mode.
14- English
4. Playing time/clock/current status indicator.
5. Lights when a disc is loaded.
6. Lights when a -R/RW/RAM disc is loaded.
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 15
Front panel (DVD-R122)
Getting Started
1. STANDBY/ON
Turns the recorder on and off.
2. AV3 INPUT
Connect external equipment.
3. DISC TRAY
Opens to accept a disc.
4. OPEN/CLOSE
Opens and closes the disc tray.
5. P.SCAN
Selects the progressive scan mode.
6. DISPLAY
Displays the playing status, title/ chapter/ time, etc.
7. SEARCH/SKIP
Goes to the next title/chapter/track or goes back
to the previous title/chapter/track.
8. STOP
Stops disc playback.
9. Remote Control Reciever
10. PR (
)
Select TV preset Channels.
Same as PROG button on the remote control.
11. REC
Starts recording.
12. PLAY/PAUSE
Plays a disc or pauses playback or recording.
Front Panel Display (DVD-R122)
1. Lights in the record mode.
2. Lights to indicate the timer record mode.
3. Lights in the progressive scan mode.
4. Playing time/clock/current status indicator.
5. Lights when a disc is loaded.
6. Lights when a -R/RW/RAM disc is loaded.
English -15
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 16
Getting Started
Rear Panel
Fan
The fan always revolves when the power is on.
Ensure a minimum of 10cm clear space on all sides of
the fan when installing the product.
1. DIGITAL AUDIO OUT(OPTICAL)
5. S-VIDEO OUT
Connects to an amplifier having a digital optical
audio input jack.
2. DIGITAL AUDIO OUT(COAXIAL)
Connects to an amplifier having a digital coaxial
audio input jack.
3. AUDIO OUT
Connects to the audio input of external equipment
using audio cables.
4. VIDEO OUT
Connects the input of external equipment using a
Video cable.
Connects the input of external equipment using an
S-Video cable.
6. COMPONENT VIDEO OUT
Connects to equipment having Component video
output.
7. AV1(TV) OUTPUT SCART Connector
8. AV2(EXT) INPUT SCART Connector
9.
10.
In from aerial connector
Out to TV connector
■
NOTE
16- English
The Antenna connection does not pass
output signal of DVD. To watch a DVD on
your TV, you must connect audio/video
cables.
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 17
Tour of the Remote Control
10. MENU Button
Brings up the DVD recorder’s setup menu.
11. OK/DIRECTION Buttons
… / † / œ / √ Buttons)
(…
12. REC MODE Button
This will display the recording status.(XP/SP/LP/EP)
13. REC Button
Use to make a recording on DVD-RAM/-RW/-R
discs.
14. CANCEL Button
15. REPEAT Button
Allows you to repeat a title, chapter, track or disc.
16. OPEN/CLOSE Button
To open and close the disc tray.
17. AUDIO/TV MUTE Button
Use this to access various audio functions on a
disc.(DVD mode)
This operates as Sound Mute. (TV mode)
18. TV Button
Press this to operate TV.
19. INPUT Button
Select line input signal in external input mode
(PROG, AV input or DV INPUT)
20. PROG Button
Select preset channels in a specific order.
Same as PROG buttons in front panel.
21. TITLE LIST/DISC MENU Button
Use this to enter the View Recording list/Disc menu.
22. PLAY LIST/TITLE MENU Button
Use this to return to the Title menu, or to view the
recorded files list.
23. ANYKEY Button
Use this to view the status of the disc that is being
played.
1. STANDBY/ON Button
2. Number Buttons
3. TV/DVD Button
4. DVD Button
Press this when you use a DVD Recorder.
5. TV VOL Buttons
TV volume adjustment.
6. Reverse/Forward Skip Buttons
Press to skip a disc backwards or forwards.
These buttons also function as STEP buttons.
Each press will play one-frame forward or reverse
(see page 56).
24. SUBTITLE Button
Press this to switch the DVD’s subtitle language.
25. RETURN Button
Returns to a previous menu.
26. MARKER/TIMER Button
Use this to bookmark a position while playing a
disc.
Press to directly enter the Timer Recording Mode
menu while stopping a disc.
27. INFO Button
This will display current settings or disc status.
7. Reverse/Forward Search Buttons
Press to search a disc backwards or forwards.
8. Stop Button
Press to stop a disc.
9. Play/Pause Button
Press to play/pause a disc.
English -17
1-00687A-R120-UK_02~18
3/10/05
5:15 PM
Page 18
Connecting & Setting UP
Quick Overview
Connecting
& Setting Up
This section involves various methods of
connecting the DVD Recorder to other external
components and required initial setting modes.
A Quick Overview presented in this guide will give you
enough information to start using the recorder.
Connecting the DVD-Recorder
†
Additional connections
†
Other type of connecting the
Video output cable
†
Other type of connecting the Audio
output cable
†
Connecting to AV3 IN, DV input jack
Quick Overview.................................................18
Connecting the DVD-Recorder ..........................19
Additional connections .....................................19
Other type of connecting the
Video output cable............................................20
Other type of connecting the Audio output cable....22
Connecting to AV3 IN, DV input jack
(only DVD-R120/DVD-R121)...........................23
18- English
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 19
Connecting the DVDRecorder
Additional connections
You can connect your DVD Recorder to a satellite or
digital tuner.
Connecting & Setting UP
You can connect your DVD Recorder to the television
using the SCART cable if the appropriate input is
available on the television.
1. Connect the RF cable as shown.
2. Connect one end of the SCART cable to the AV1
socket on the rear of the DVD Recorder.
3. Plug the other end into the appropriate connector on
the television.
4. Plug in the DVD Recorder and TV
5.Turn on the DVD Recorder and TV.
external device
(VCR/Satellite receiver)
6. Press the INPUT button on your TV remote control
until the Video signal from the DVD Recorder
appears on the TV screen.
To RF IN
- DVD mode
To TV
1. Connect the AV2 connector of DVD Recorder and
VCR/Satellite receiver or digital tuner using a SCART
cable.
2. Connect the AV1 connector to the SCART AV
connector on TV.
RF Cable
To ANT INPUT
3. Turn on the DVD Recorder, VCR/Satellite receiver or
digital tuner and TV.
4. Set Input mode on AV2.
- TV mode
■
NOTE
■
The RF cable connection of this product
sends only signals of TV.
You must connect SCART cable or
Audio/Video cables to watch a DVD from
your DVD Recorder.
TV mode
Press the TV/DVD button on remote
control, then “TV” appear on Front LED
display (or turn off DVD Recorder).
Then you can watch programmes
received through RF cable.
1. Press the TV/DVD button on remote control,then
“TV” appear on Front LED display. (or turn off DVD
Recorder.)
2. You can watch programmes from a satellite or digital
tuner connected to this DVD Recorder, even when
the DVD Recorder is turned off.
English -19
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 20
Connecting & Setting UP
Other type of connecting
the Video output cable
There are several ways to output video signal not using
scart cables. Select one of the following video
connecting that best suits you below.
Case 1 : Connecting to a Video (Composite) output
jack
● Case 2 : Connecting to an S-Video output jack
● Case 3 : Component Video output jacks
●
Case 1 : Connecting to a Video
(Composite) output jack
1. Connect a video(yellow) cable between the VIDEO
(yellow) OUT jack on DVD Recorder and VIDEO
(yellow) INPUT jack on your TV (or AV amplifier).
● You will enjoy regular quality images.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV (or AV amplifier).
(See page 22 to 23)
S-Video, Component video and Progressive
Output Modes
●
●
20- English
yellow
Video/Audio Cable
●
S-Video and Component video output are available
only if your TV supports S-Video input or Component
video input, respectively. If S-Video or Component
video output does not work, check the TV
connections and the TV input selection settings.
Compared to standard interlaced video, progressive
scan doubles the amount of video lines fed to your
TV, resulting in a more stable, flicker-free, clear
image than interlaced video.
This is only available with TVs that support
progressive scan.
Progressive Scan Output (576p)
Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the
picture, in case of 576 progressive scan picture
problems, It is recommended that the user switch the
connection to the ‘standard definition’ output. If there
are questions regarding our TV set compatibility with
this model 576p DVD Recorder, please contact our
customer service centre.
yellow
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 21
Case 2 : Connecting to an
S-Video output jack
1. Connect an S-Video cable (not included) between the
S-VIDEO OUT jack on DVD Recorder and S-VIDEO
INPUT jack on your TV (or AV amplifier).
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,PB,PR) jacks on
DVD Recorder and COMPONENT IN(Y,PB,PR) jacks
on your TV.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV (or AV amplifier).
(See pages 22 to 23).
3. After connecting, refer to the page 36 to 37.
● You will enjoy high quality and accurate color
reproduction images.
2
green
green
blue
red
COMPONENT
Y
blue
Pb
1
red
Pr
■
Make sure that the color coded
connections match. The Y, PB, PR
component output jacks of your DVD
Recorder must be connected to the exact
corresponding component input jacks on
your TV.
■
Progressive setting is only available when
the Video Out is set to Component.
(See page 36)
NOTE
English -21
Connecting & Setting UP
2. Connect audio cables (white and red) between the AV
AUDIO OUT jacks on DVD Recorder and AUDIO IN
jacks on TV (or AV amplifier).
● You will enjoy high quality images.
Case 3 : Component Video
output jacks
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 22
Connecting & Setting UP
Other type of connecting
the Audio output cable
Case 2 : Connecting to a stereo
amplifier with AV output jacks
If your stereo amplifier only has AUDIO INPUT
jacks(L and R), use the AUDIO OUT jacks.
There are several ways to output audio signal not using
scart cables. Select the audio connection that best suits
you below.
Case 1 : Connecting to your TV
Case 2 : Connecting to a stereo amplifier with AV
output jacks
● Case 3 : Connecting to an AV amplifier with a
digital output jack
●
●
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
red
white
red
white
Case 1 : Connecting to your TV
If your TV has audio input jacks, use this connection.
Front(L)
speaker
22- English
yellow
red
white
white
red
yellow
Front(R)
speaker
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 23
Case 3: Connecting to an AV
amplifier with a digital
output jack
If your AV amplifier has a Dolby Digital, MPEG2 or
DTS decoder and a digital input jack, use this
connection. To enjoy Dolby Digital, MPEG2 or DTS
sound, you will need to set up the audio settings.
(See page 35)
Connecting to AV3 IN, DV
input jack
This allows you to connect your DVD Recorder to other
external devices and view or record their outputs.
●
Case 1 : Connecting a VCR, Set-Top Box(STB), DVD
player or Camcorder to the AV3 IN jacks
Case2 : Connecting a DV Device to the DV IN jack
Case 1 : Connecting a VCR,
Set-Top Box(STB), DVD player
or Camcorder to the AV3 IN
jacks
Connecting a VCR or external device to AV3 IN jacks of
the DVD Recorder.
You can record from connected equipment (VCR, STB,
DVD player or Camcorder).
or
Rear(L)
Rear(R)
Camcorder
Front(L)
Front(R)
Subwoofer
VCR
Center
red
white
yellow
STB
DVD
yellow
white
red
■
AV 3 in selection will be automatically
done. If the input is not selected
automatically, use INPUT button to select
proper input.
■
Copy protected content cannot be
recorded.
NOTE
English -23
Connecting & Setting UP
●
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 24
Case 2 : Connecting a
Camcorder to the DV IN jack
(only DVD-R120/DVD-R121)
Connecting & Setting UP
If your digital camcorder has a DV output jack, connect
it to the DV input jack of your DVD Recorder.
Camcorder
■
NOTE
24- English
If the input is not selected automatically,
use INPUT button to select proper input.
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 25
System
Setup
On-Screen Menu
Navigation
The on-screen menus allow you to enable or disable
various functions on your DVD Recorder.
Use the following buttons to open and navigate through
the on-screen menus.
No Disc
Programme
Setup
Timer Record
Video Plus+
√
Timer Record
√
Video Plus+ Extended : Off
√
DVD-RAM(VR)
Disc Navigation
Playlist
Disc manager
Disc Navigation
Title List
√
DivX
√
Photo
√
Music
√
Programme
Setup
MOVE
OK
RETURN
EXIT
MOVE
OK
RETURN
EXIT
Press this button on the remote control to open the
on-screen MENU.
Press again to exit the on-screen MENU.
2 … / † , œ / √ Buttons
Press these buttons on remote control to move the
selection bar … / † , œ / √ to cycle through the menu
options.
On-Screen Menu Navigation......................25
Plug & Auto Set up.....................................26
3 OK Button
Press this button on the remote control to confirm any
new settings.
Setting the Clock.............................................27
Presetting Channels with
the Auto Setup function ..............................28
Presetting Channels with
the Manual Setup function .........................29
4 RETURN Button
Press this button on the remote control to return to the
Previous MENU screen displayed or to exit the
on-screen MENU.
Setting up the Language Options ..............30
EP Mode Time Setting ...............................31
Automatic Chapter Creation.......................32
Setting up the Front Display Options .........33
Setting up NICAM Options .........................34
DivX(R) Registration...................................34
Setting up the Audio Options .....................35
Setting up Video Output Options................36
Setting up the Progressive scan ................37
Canceling the Progressive scan.................37
Setting up the Display(Video) Options .......38
Setting up the Parental Control..................39
English -25
System Setup
1 MENU Button
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 26
Plug & Auto Set up
Auto Channel Scan is completed, Auto
5 After
Clock Setting will be started automatically in
10 seconds. If you want to start Auto Clock
Setting immediately, press OK button. If you
do not want to do Auto Clock Setting, press
CANCEL or MENU button.
Your DVD Recorder will automatically set itself up when
it is plugged in for the first time. TV stations and clock
will be stored in memory. The process takes a few
minutes. Your DVD Recorder will then be ready for use.
Auto channel scan completed successfully.
Press [OK] button to auto clock set.
OK
1
Connect the RF cable as indicated on page
19.
2
Plug the DVD Recorder into the mains.
Cancel
(Connecting Your DVD Recorder to the TV Using the RF
Cable and scart cable.)
System Setup
“AUTO” in the front panel display flickers.
until current date and time are
6 Wait
displayed automatically. If you want to exit
Auto clock setting, press MENU button.
Please wait. Now setting the clock.
If you want to exit clock setting,
press the [MENU] button.
3 Start the auto setup.
7 Check the date and time.
Auto setup will be started.
Check antenna and TV cable connection.
No Disc
OK
Clock Set
Cancel
Programme
Setup Time
12 : 00
4 Auto Channel scan will be started.
Channel scan
Now, Scanning.
5%
MOVE
OK
Date
01 / JAN / 2005
RETURN
Auto Clock
SAT
On
EXIT
• if it is : Correct, press OK button then the date and time will
be saved. If you don't press the OK button, the date
and time will be saved automatically after 5 seconds.
• if it is : Incorrect, input correct Time, Date, Year using †…œ
√ buttons or number buttons. Press OK button then
the date and time will be saved. When you need to
change clock setting, you can set up it manually.
(see page 27)
• The number of stations automatically stored by the DVD
Recorder depends on the number of stations that it has found.
■
Now, DVD Recorder is ready for use. Function for
“Plug & Auto Set Up” is fixed already. So if you
want to change this fixed one, you can change it
by Presetting the Stations in OSD “Presetting
Channels with the Manual set up function” menu.
(see page 29)
■
Auto Set up function can be performed by pressing
é (STOP) on the unit continuously for 5 seconds or
more during power off with no disc inserted.
NOTE
26- English
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 27
the …† buttons to select On for the
4 Press
Auto Clock.
Setting the Clock
No Disc
Clock Set
Programme
Setup Time
12 : 00
This menu is used to set the current time.
You need to set the time to use timer recording.
MOVE
OK
Date
01 / JAN / 2005
RETURN
Auto Clock
SAT
Off
EXIT
the unit in Stop mode/No Disc mode,
press the MENU button.
1 With
No Disc
Programme
Setup
Video Plus+
√
Timer Record
√
Video Plus+ Extended : Off
√
OK
RETURN
the OK button, then the date and
5 Press
time will be saved.
If you don’t press the OK button, it will not be saved.
■
You must have the RF cable connected to
set the Auto Clock. See page 19.
■
The DVD Recorder automatically sets the
clock according to the time signal
broadcast between the channels PR1 to
PR5. If you do not need the Auto clock
set function, select Off.
EXIT
NOTE
the …† buttons to select Setup, then
press the OK or √ button.
2 Press
No Disc
Programme
Setup
MOVE
Setup
System
√
Clock Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
OK
RETURN
EXIT
the …† buttons to select Clock Set,
then press the OK or √ button.
3 Press
Use navigation …†œ √ buttons to input Time, Date
or Year. Use number buttons to input clock data
directly. The day of the week is displayed
automatically.
No Disc
Clock Set
Programme
Setup Time
12 : 00
MOVE
OK
Date
01 / JAN / 2005
RETURN
Auto Clock
SAT
Off
EXIT
English -27
System Setup
MOVE
Timer Record
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 28
Presetting Channels with
the Auto Setup function
This feature allows you to manually set the DVD
Recorder tuner band to Antenna or Cable, whichever
you connected to the Antenna In jack during initial
setup.
the …† buttons to select Auto
4 Press
Setup, then press the OK or √ button.
The message “Your data will be lost.Press [OK] to
continue, [MENU] to exit.” is displayed.
No Disc
Install
Programme
Setup
Auto Setup
√
Manual Setup
√
Your data will be lost.
Press [OK] to continue, [MENU] to exit.
OK
MOVE
1
OK
RETURN
EXIT
With the unit in Stop mode/No Disc mode,
press the MENU button.
No Disc
Programme
System Setup
Setup
Timer Record
Video Plus+
√
Timer Record
√
Video Plus+ Extended : Off
√
6 Press the OK button to continue.
If you want to exit, press the MENU button.
No Disc
Programme
Auto Setup
Please wait.
Setup
MOVE
OK
RETURN
11%
EXIT
Scanning...
Stop
2
Press the …† buttons to select Setup, then
press the OK or √ button.
No Disc
Programme
Setup
MOVE
Setup
System
√
Clock Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
OK
RETURN
Programme
Setup
MOVE
EXIT
28- English
Install
Auto Setup
√
Manual Setup
√
OK
RETURN
RETURN
7 Channel scan will be started.
EXIT
Press the OK button to stop the Auto Setup.
Press the …† buttons to select Install, then
3 press
the OK or √ button.
No Disc
OK
EXIT
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 29
Presetting Channels with
the Manual Setup function
You can add preset channel that Auto Channel Search
missed. And you can delete a channel you wish to
remove. You can programme the order of channels.
the …† buttons to select Manual
4 Press
Setup, then press the OK or √ button.
No Disc
Manual Setup
PR
CH
Name
Edit
01
02
03
04
05
06
07
---------------
----------------------
√
MOVE
1
With the unit in Stop mode/No Disc mode,
press the MENU button.
OK
√
√
√
√
√
√
RETURN
EXIT
the …† buttons to select a PR
5 Press
(programme) you wish to edit, delete, or
swap, then press the OK or √ button.
Select Edit, Delete or Swap.
No Disc
Programme
MOVE
2
√
Timer Record
√
Video Plus+ Extended : Off
√
OK
RETURN
Programme
Setup
Manual Setup
PR
CH
Name
Edit
01
02
03
04
05
06
07
109
-------------
----------------------
Edit√
Delete
√
Swap
√
MOVE
EXIT
Press the …† buttons to select Setup, then
press the OK or √ button.
No Disc
No Disc
OK
3
√
√
EXIT
Manual Setup
√
Clock Set
√
PR
01
Language
√
CH
109
Audio
√
Name
----
Video
√
MFT
--- ---
Parental Control
√
Install
√
Save
OK
RETURN
No Disc
Setup
√
Setup
System
OK
EXIT
Press the …† buttons to select Install, then
press the OK or √ button.
Programme
√
• In case of Edit : you can add or edit PR(programme)
After change PR informations(CH, Name, Decoder,
MFT), select Save, then press the OK button.
MOVE
MOVE
RETURN
System Setup
Setup
Timer Record
Video Plus+
Install
Auto Setup
√
Manual Setup
√
- CH : Tune the channel using œ √ buttons.
- Name : Display station name automatically detected in
broadcasting signal. If not detected, you can
edit name by using …†œ √ buttons.
- MFT : You can tune up the channel frequency better
using œ √ buttons.
• In case of Delete : the channel information of selected
PR(programme) will be removed.
MOVE
OK
RETURN
EXIT
• In case of Swap : You can swap the channel
information of two PR(programme). For example, if you
wish to swap PR2 and PR5, select swap at PR2, then
press the OK or √ button at PR5.
English -29
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 30
Setting up the Language
Options
the …† buttons to select the desired
4 Press
language option, then press the OK or √
button.
●
●
●
If you set the audio, subtitle, disc menu, on-screen
menu, DivX subtitle language in advance, they will
come up automatically every time you watch a
movie.
If the selected language is not recorded on the disc,
the original pre-recorded language is selected.
●
●
the unit in Stop mode/No Disc mode,
1 With
press the MENU button.
System Setup
No Disc
Programme
Setup
Timer Record
Video Plus+
√
Timer Record
√
Video Plus+ Extended : Off
√
Audio Language: For the speaker sound.
Subtitle Language: For the disc subtitles.
Disc Menu Language: For the disc menu
contained on the disc
On-Screen Menu Language: For the Player Menu
of your DVD Recorder
DivX Subtitle: Selecting a supported DivX subtitle
language by region
Western
English, Breton, Catalan, Danish, Dutch,
Faroese, Finnish, French, Gaelic, German,
Icelandic, Irish, Italian, Norwegian, Portuguese,
Spanish and Swedish
Central
English, Albanian, Croatian, Czech, Hungarian,
Polish, Romanian, Slovak, Slovene and
Serbian(Latin)
Greek
English and modern Greek
the …† buttons to select the desired
5 Press
Language, then press the OK or √ button.
MOVE
OK
RETURN
EXIT
No Disc
Programme
Setup
2
Language
Audio
: Original
Original
√
Subtitle
: Automatic
English
: English
Français
√
On-Screen Menu : English
Deutsch
√
DivX Subtitle
√
Disc Menu
Press the …† buttons to select Setup, then
press the OK or √ button.
√
: Western
Español
Italiano
Nederlands
Korean
No Disc
Programme
Setup
MOVE
System
√
Clock Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
OK
RETURN
EXIT
the …† buttons to select Language,
3 Press
then press the OK or √ button.
Language setup menu will be displayed.
No Disc
Programme
Setup
MOVE
30- English
MOVE
Setup
Language
Audio
: Original
√
Subtitle
: Automatic
√
Disc Menu
: English
√
On-Screen Menu : English
√
DivX Subtitle
√
OK
: Western
RETURN
EXIT
OK
RETURN
EXIT
■
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
■
The selected language will only appear if
it is supported on the disc.
■
If the subtitle language is displayed in
broken fonts, change DivX Subtitle to the
appropriate region.
If is still does not work, the format is not
supported.
NOTE
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 31
EP Mode Time Setting
the …† buttons to select EP Mode
4 Press
Time, then press the OK or √ button.
No Disc
Programme
Setup
You can select one of four recording modes by pressing
the REC MODE button repeatedly.
EP mode is one of four REC Mode (XP,SP,LP,EP).
In EP(Extended Play) mode, you can set recording time
to 6 or 8 hours by this setting.
the unit in Stop mode/No Disc mode,
1 With
press the MENU button.
No Disc
Programme
MOVE
: 6Hours
6 Hours
√
Chapter Creator
: Off
8 Hours
√
Front Display
: Bright
√
NICAM
: On
√
DivX(R) Registration
MOVE
OK
RETURN
√
EXIT
the …† buttons to select the desired
5 Press
time, then press the OK or √ button.
Timer Record
Video Plus+
√
Timer Record
√
Video Plus+ Extended : Off
√
OK
RETURN
System Setup
Setup
System
EP Mode Time
EXIT
the …† buttons to select Setup, then
2 Press
press the OK or √ button.
No Disc
Programme
Setup
MOVE
Setup
System
√
Clock Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
OK
RETURN
EXIT
the …† buttons to select System,
3 Press
then press the OK or √ button.
System menu will be displayed.
No Disc
Programme
Setup
System
EP Mode Time
: 6Hours
√
Chapter Creator
: Off
√
Front Display
: Bright
√
NICAM
: On
√
DivX(R) Registration
MOVE
OK
RETURN
√
EXIT
English -31
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 32
the …† buttons to select On or Off,
5 Press
then press the OK or √ button.
Automatic Chapter
Creation
• Off: Select this option when you do not want
(Automatic Chapter Creation).
• On: Select this option when you want (Automatic
Chapter Creation).
This function only works for DVD-RW (Video Mode) and
DVD-R discs.
the unit in Stop mode/No Disc mode,
1 With
press the MENU button.
DVD-RW(V)
Disc Navigation
the REC button to start recording.
(See page 44 about how to set recording
6 Press
speed) The message “Do you want to
create the chapter menu after this
recording?” is displayed.
Disc Navigation
Title List
√
Disc manager
Programme
Setup
Do you want to create the chapter menu
after this recording?
No
System Setup
Yes
MOVE
OK
RETURN
EXIT
the …† buttons to select Setup, then
the œ √ buttons to select Yes and
2 Press
press the OK or √ button.
press the OK button.
7 Press
DVD-RW(V)
Disc Navigation
Disc manager
Programme
Setup
MOVE
√
Clock Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
OK
RETURN
EXIT
the …† buttons to select System,
3 Press
then press the OK or √ button.
System menu will be displayed.
DVD-RW(V)
Disc Navigation
Disc manager
Programme
Setup
MOVE
• A new chapter is created according to the selected
recording mode. A chapter will be about 5 minutes long
in XP and SP, and about 15 minutes long in LP and EP
mode.
Setup
System
8 Press the STOP button to stop recording.
display the created chapters, finalise the
(see page 87) and then press the DISC
9 Todisc
MENU button. The chapter menu will be
displayed.
System
EP Mode Time
: 6Hours
√
Chapter Creator
: Off
√
Front Display
: Bright
√
NICAM
: On
√
DivX(R) Registration
OK
RETURN
CHAPTER
√
EXIT
Previous
Top
Next
the …† buttons to select Chapter
4 Press
Creator, then press the OK or √ button.
DVD-RW(V)
Disc Navigation
Disc manager
Programme
Setup
MOVE
32- English
System
EP Mode Time
: 6Hours
√
Chapter Creator
: Off
Off
: Bright
On
√
Front Display
NICAM
: On
√
DivX(R) Registration
OK
RETURN
■
The Automatic Chapter Creation function
does not work during Timer Recording or
when you turn the power off.
■
DVD-R discs cannot be unfinalised.
CAUTION
√
√
EXIT
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 33
the …† buttons to select Front
4 Press
Display, then press the OK or √ button.
Setting up the Front
Display Options
No Disc
Programme
Setup
Adjust the brightness of the unit’s front panel display.
1
With the unit in Stop mode/No Disc mode,
press the MENU button.
No Disc
Programme
Setup
MOVE
System
EP Mode Time
: 6Hours
√
Chapter Creator
: Off
√
Front Display
: Bright
Bright
√
NICAM
: OnDim
DivX(R) Registration Auto Dim
MOVE
OK
RETURN
√
√
EXIT
Timer Record
Video Plus+
√
Timer Record
√
Video Plus+ Extended : Off
√
OK
RETURN
EXIT
the …† buttons to select the desired
5 Press
item, then press the OK or √ button.
• Bright : Makes the Front Panel Display bright.
• Dim : Makes the Front Panel Display dim.
• Auto Dim : Makes the Front Panel Display dim
automatically when playing a disc.
System Setup
the …† buttons to select Setup, then
2 Press
press the OK or √ button.
No Disc
Programme
Setup
MOVE
Setup
System
√
Clock Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
OK
RETURN
EXIT
the …† buttons to select System,
3 Press
then press the OK or √ button.
System menu will be displayed.
No Disc
Programme
Setup
System
EP Mode Time
: 6Hours
√
Chapter Creator
: Off
√
Front Display
: Bright
√
NICAM
: On
√
DivX(R) Registration
MOVE
OK
RETURN
√
EXIT
English -33
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 34
Setting up NICAM Options
the …† buttons to select NICAM,
4 Press
then press the OK or √ button.
No Disc
Programme
Setup
NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language). NICAM programmes are always
accompanied by a standard mono sound broadcast and
you can select the desired sound by setting NICAM on or
off.
1
With the unit in Stop mode/No Disc mode,
press the MENU button.
No Disc
System Setup
Programme
Setup
MOVE
Timer Record
Video Plus+
√
Timer Record
√
Video Plus+ Extended : Off
√
OK
RETURN
Programme
Setup
MOVE
√
Clock Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
OK
RETURN
EXIT
System menu will be displayed.
No Disc
Setup
System
EP Mode Time
: 6Hours
√
Chapter Creator
: Off
√
Front Display
: Bright
√
NICAM
: On
√
DivX(R) Registration
MOVE
34- English
√
Chapter Creator
: Off
√
Front Display
: Bright
√
NICAM
: On
Off
√
DivX(R) Registration On
√
OK
RETURN
EXIT
the …† buttons to select On or Off,
5 Press
then press the OK or √ button.
• Off: Only set at this position to record the standard
mono sound during a NICAM broadcast if the stereo
sound is distorted due to inferior reception conditions.
• On: NICAM mode
DivX(R) Registration
Setup
System
the …† buttons to select System,
3 Press
then press the OK or √ button.
Programme
: 6Hours
EXIT
the …† buttons to select Setup, then
2 Press
press the OK or √ button.
No Disc
MOVE
System
EP Mode Time
OK
RETURN
√
EXIT
Please use the Registration code to register this DVD
Recorder with the DivX(R) Video On Demand format.
To learn more, visit www.divx.com/vod.
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 35
Setting up the Audio
Options
the …† buttons to select the desired
5 Press
item, then press the OK or √ button.
■
You can connect the DVD Recorder to an external amp
or Home Theater.
Allow you to setup the Audio device and sound status
depending on the audio system in use.
1
With the unit in Stop mode/No Disc mode,
press the MENU button.
No Disc
Programme
Setup
√
Timer Record
√
Video Plus+ Extended : Off
√
OK
RETURN
EXIT
the …† buttons to select Setup, then
2 Press
press the OK or √ button.
No Disc
Programme
Setup
MOVE
Setup
System
√
Clock Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
OK
RETURN
Audio setup menu will be displayed.
No Disc
Setup
Digital Output
1. PCM :
Select this when you have no equipment that
can decode Dolby Digital (or MPEG-2) signal.
When you play Dolby Digital (or MPEG-2)
sound track, the digital output are converted to
PCM Stereo.
2. Bitstream : Output Dolby Digital (or MPEG-2) audio as
bitstream. Select this when your AV
receiver or AV amplifier have Dolby Digital
(or MPEG-2) Decoder.
■
Digital output setting is equally applied to
both Dolby Digital and MPEG-2 audio.
LPCM sound track is always outputted as
PCM. It has no relation with Digital Output
setting.
■
Be sure to select the correct Digital
Output or you will hear no sound or loud
noise.
NOTE
EXIT
Press the …† buttons to select Audio, then
3 press
the OK or √ button.
Programme
Audio Options
Audio
Digital Output
: PCM
√
DTS
: Off
√
Dynamic Compression : On
√
DTS
1. Off : Doesn’t output DTS signal.
Select this when your AV receiver or AV
amplifier does not have DTS decoder.
2. On : Outputs DTS Bitstream via digital output when you
play DTS track.
Select this only when your AV receiver (or AV
amplifier) have DTS decoder.
■
MOVE
OK
RETURN
EXIT
NOTE
Press the …† buttons to select the desired
4 button.
audio option, then press the OK or √
No Disc
Programme
Setup
Audio
Digital Output
DTS
: PCM
PCM
: Off
Bitstream
Dynamic Compression : On
MOVE
OK
RETURN
√
√
√
EXIT
When DTS soundtrack is played, sound
does not output from AV Audio Output.
Dynamic Compression
This is only active when a Dolby Digital signal is
detected.
1. Off : You can enjoy the movie with the standard
Dynamic Range.
2. On : When Movie soundtracks are played at low
volume or from smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
English -35
System Setup
MOVE
Timer Record
Video Plus+
NOTE
Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 36
Setting up Video Output
Options
the …† buttons to select Video
4 Press
Output, then press the OK or √ button.
No Disc
Programme
Setup
Video
TV Aspect
: 16:9 Wide
3D Noise Reduction
: Off
√
Video Output
: Component
Component
√
You can enjoy high quality image through RGB or
Component video connections.
1
RGB
MOVE
With the unit in Stop mode/No Disc mode,
press the MENU button.
No Disc
Programme
Setup
Timer Record
Video Plus+
√
Timer Record
√
Video Plus+ Extended : Off
√
√
OK
RETURN
EXIT
Component
Select this when the Recorder is connected
to a TV with Component jack.
RGB
Select this when the Recorder is connected
to your TV using SCART cable.
System Setup
the …† buttons to select the desired
5 Press
item, then press the OK or √ button.
MOVE
OK
RETURN
EXIT
In Component mode, you can set video output to
Progressive(P.SCAN) or Interlace, see page 37.
the …† buttons to select Setup, then
2 Press
press the OK or √ button.
No Disc
Programme
Setup
MOVE
Setup
System
√
Clock Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
OK
RETURN
EXIT
the …† buttons to select Video, then
3 Press
press the OK or √ button.
Video setup menu will be displayed.
No Disc
Programme
Setup
MOVE
36- English
Video
TV Aspect
: 16:9 Wide
3D Noise Reduction
: Off
√
Video Output
: Component
√
OK
RETURN
√
EXIT
Available video output jacks are as follow.
Available Video Output Jack
Component mode
Setting mode
RGB Mode
Output jack
P.SCAN off mode (Interlace mode) P.SCAN on mode
Component Output
O
O
X
(Y, Pb, Pr)
(TV in progressive mode)
R, G, B
X
X
O
AV1 Scart
Composite
O
X
X
AV2 Scart (Composite)
O
O
X
O
O
Composite Video out
X
S-Video out
O
O
X
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 37
Setting up the Progressive
scan
If the TV supports Progressive Scan, press the
P.SCAN button on the front of the DVD Recorder to
enjoy.
1
Canceling the Progressive
scan
the unit in Stop mode, press the
1 With
P.SCAN button on the front of the DVD
Recorder.
The message “Press [Yes] to confirm Interlace scan
mode. Otherwise press [No]” will appear. Press the œ
√ buttons to select Yes, and then press the OK
button.
With the unit in Stop mode, press the
P.SCAN button on the front of the DVD
Recorder.
The message “Press [Yes] to confirm Progressive
scan mode. Otherwise press [No]” will appear. Press
the œ √ buttons to select Yes, and then press the OK
button.
Press [Yes] to confirm Interlace scan mode.
Otherwise press [No]
Yes
No
Otherwise press [No]
Yes
No
message “Please set your TV to
2 The
Interlace input. To deactivate, press [STOP]
key.” will appear. Press the OK button.
The message “Please set your TV to
2 [STOP]
Progressive input. To deactivate, press
key.” will appear. Press the OK
Please set your TV to Interlace input,
To deactivate, press [STOP] key.
button.
OK
Please set your TV to Progressive input.
To deactivate, press [STOP] key.
OK
message “Video Output Mode Interlace
3 The
Scan” will appear.
message “Video Output Mode
3 The
Progressive Scan” will appear.
Video Output Mode
Interlace Scan
Video Output Mode
Progressive Scan
■
Do not press the P.SCAN button if you
are using a TV that does not support
Progressive mode. Nothing will be
displayed on the screen if pressed.
■
If you press the P.SCAN button by
mistake when your TV does not support
Progressive mode, you need to release
the Progressive mode. To release the
Progressive mode, press the P.SCAN
button on the front panel 3 times.
The screen will recover after the PSO
LED on the front panel display turns off.
NOTE
■
Progressive setting is only available when
the Video Out is set to Component.
■
If the P.SCAN button on the DVD
recorder’s front panel is pressed during
playback, the message “This function is
only available in stop mode” appears on
the screen.
■
Progressive setting is only available when
the DVD recorder is in stop mode.
NOTE
English -37
System Setup
Press [Yes] to confirm Progressive scan mode.
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 38
Setting up the
Display(Video) Options
■
NOTE
Press the RETURN or œ button to return
to the previous menu. Press the MENU
button to exit the menu.
Display(Video) Options
This function allows you to setup the TV screen settings.
This function depends on disc type. It may not work for
some disc types.
the unit in Stop mode/No Disc mode,
1 With
press the MENU button.
TV Aspect
No Disc
Programme
Setup
Timer Record
Video Plus+
√
Timer Record
√
Video Plus+ Extended : Off
√
Depending on the type of television you have, you may
want to adjust the screen setting. (aspect ratio)
No Disc
Programme
System Setup
MOVE
OK
RETURN
Setup
EXIT
the …† buttons to select Setup, then
2 Press
press the OK or √ button.
No Disc
Programme
Setup
MOVE
System
√
Clock Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
OK
RETURN
EXIT
Video setup menu will be displayed.
No Disc
Setup
: 16:9
Wide Box √
4:3 Letter
3D Noise Reduction
4:3 Pan-Scan
: Off
√
Video Output
16:9 Wide
: Component
√
OK
RETURN
EXIT
Setup
the …† buttons to select Video, then
3 Press
press the OK or √ button.
Programme
MOVE
Video
TV Aspect
• 4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD
supplies, even though you have a TV
with a 4:3 ratio screen.
Black bars will appear at the top and
bottom of the screen.
• 4:3 Pan - Scan : Select this for conventional size TV
when you want to see the central
portion of the 16:9 screen. (Extreme left
and right side of movie picture will be
cut off.)
• 16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
Video
TV Aspect
: 16:9 Wide
3D Noise Reduction
: Off
√
Video Output
: Component
√
√
3D Noise Reduction (motion adaptive noise
reduction)
MOVE
OK
RETURN
EXIT
No Disc
Programme
4
Press the …† buttons to select the desired
video option, then press the OK or √ button.
No Disc
Programme
Setup
Setup
: 4:3
4:3Letter
LetterBox
Box √
3D Noise Reduction
4:3 Pan-Scan
: Off
√
Video Output
16:9 Wide
: Component
√
MOVE
OK
RETURN
EXIT
●
the …† buttons to select the desired
5 Press
item, then press the OK or √ button.
38- English
: 16:9 Wide
3D Noise Reduction
: Off
Off
√
Video Output
: Component
On
√
√
Video
TV Aspect
●
MOVE
Video
TV Aspect
OK
RETURN
EXIT
On : Provides a cleaner picture through noise
reduction (for recording).
Off : Normal
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 39
Setting up the Parental
Control
the OK or √ button to select
5 Press
Password.
No Disc
Programme
Parental Control
Password
1
With the unit in Stop mode/No Disc mode,
press the MENU button.
No Disc
Programme
Setup
MOVE
√
Timer Record
√
Video Plus+ Extended : Off
√
OK
RETURN
No Disc
Setup
MOVE
EXIT
Timer Record
Video Plus+
■
Setup
System
√
Clock Set
√
Language
√
Audio
√
Video
√
Parental Control
√
Install
√
OK
RETURN
Press the RETURN or œ button to return
to the previous menu. Press the MENU
button to exit the menu.
EXIT
Press the …† buttons to select Setup, then
press the OK or √ button.
Programme
RETURN
If you forget your password
1 Remove the disc.
down
(FF) on the front panel for 5
2 Hold
seconds or more.
EXIT
the …† buttons to select Parental
3 Press
Control, then press the OK or √ button.
No Disc
Parental Control
Programme
Setup
Create the password
NUMBER
OK
RETURN
EXIT
the 4-digit password using the 0 to 9
4 Enter
buttons on the remote control.
The ‘Confirm the password.’ message will be displayed.
Enter your password again.
No Disc
Parental Control
Programme
Setup
Confirm the password
NUMBER
OK
RETURN
EXIT
English -39
System Setup
2
OK
the …† buttons to select On or Off,
6 Press
then press the OK or √ button.
NOTE
MOVE
√
On
Setup
The Parental Control function works in conjunction with
DVDs that have been assigned a rating which helps
you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
Off
:Off
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 40
About the Rating Level
About the Change Password
the …† buttons to select Rating
1 Press
Level.
No Disc
Programme
Setup
Programme
: On
√
Rating Level
: Level 1 Kids
√
System Setup
OK
RETURN
Setup
Password
Rating Level
Change Password
Parental Control
Password
: On
√
Rating Level
: Level 1 Kids
√
Change Password
MOVE
EXIT
OK
√
RETURN
EXIT
2 Press the OK or √ button.
The rating level will be displayed.
No Disc
Setup
√
2 Press the OK or √ button.
Programme
No Disc
Parental Control
Password
Change Password
MOVE
the …† buttons to select Change
1 Press
Password.
The 'Enter the password.' message will be displayed.
Parental Control
No Disc
Level 8 Adults√
:On
Level17Kids √
: Level
Programme
Level 6
Change Password
Setup
√
Enter the password
Level 5
Level 4
Level 3
Level 2
Level 1 Kids
MOVE
3
OK
RETURN
EXIT
Press the …† buttons to select Rating
Level you want, then press the OK or √
button.
NUMBER
OK
RETURN
EXIT
the 4-digit password using the 0 to 9
3 Enter
buttons on the remote control.
The ‘Confirm the password.’ message will be displayed.
Enter your password again.
For example, if you select up to Level 6, discs that
contain Level 7, 8 will not play. A larger number
indicates that the programme is intended for adult use
only.
No Disc
Change Password
Programme
Setup
Confirm the password
* * *
NUMBER
■
NOTE
40- English
OK
RETURN
EXIT
See page 39 if you forgot your password.
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 41
Before Recording
Recording
This unit can record on various types of discs. Before
recording, read the following instructions and select the
disc type according to your preference.
Recordable discs
This section shows various DVD recording
methods.
This recorder can record on the following discs.
DVD-RAM
●
●
DVD-RW
DVD-R
DVD-RWs and DVD-RAMs are rewritable.
DVD-Rs are non-rewritable
Compatibility between Samsung and Other
Company’s Recorder
Recording
format
DVD-RAM
VR Mode
Recording
Device
Samsung
Other Company
Samsung
VR Mode
Other Company
DVD-RW
Samsung
V Mode
Other Company
Samsung
DVD-R
V Mode
Before Recording ...........................................41
Other Company
Finalising
X
X
finalised
not finalised
finalised
not finalised
finalised
not finalised
finalised
not finalised
finalised
not finalised
finalised
not finalised
Additional Recording in
Samsung Recorder
Recordable
Recordable
Not recordable
Recordable
Not recordable
Recordable
Not recordable
Recordable
Not recordable
Not recordable
Not recordable
Recordable
Not recordable
Not recordable
Recording the current TV programme
you are watching ............................................43
Recording from external equipment
you are watching ............................................45
Copying from a Camcorder
(only DVD-R120/DVD-R121)..........................46
Making a One Touch Recording (OTR)..........47
Making a Timer Recording .............................48
Flexible Recording (for Timer recording only) ..49
Editing the Scheduled Record List.................49
Deleting the Scheduled Record List...............50
■
Finalise
- This closes the DVD-R/RW so no
additional recording can be done.
■
Unfinalise
- This allows additional recording on a
DVD-RW disc originally recorded on the
DVD Recorder.
- A DVD-RW disc that has been recorded
by DAO(Disc At Once) in a PC cannot
be unfinalised.
- A DVD-RW disc that has been recorded
in Video Mode of a different maker’s
recorder cannot be unfinalised.
- A DVD-R disc cannot be unfinalised.
NOTE
Using the Video Plus+ Feature ....................51
Video Plus+ Extended....................................52
Recording the Standard Timer List ................52
English -41
Recording
Disc Types
1-00687A-R120-UK_19~42
3/10/05
5:19 PM
Page 42
Recording Formats
Mode
Since available functions differ depending on the disc type,
select a disc that best fits your preferences; When you
insert an unused disc, the following message appears.
DVD-RAM: Use after formatting the disc.
Unformatted Disc
Do you want to format this disc?
Yes
No
Recording Times
Data Rates
XP
Select when the
(high quality mode) video quality is
important.
Approx. 1 hour
about 8 Mbps
SP
Select to record in
(standard quality mode) standard quality.
Approx. 2 hours
about 4 Mbps
Select when a long
LP
recording time is
(long recording mode)
required.
Approx. 4 hours
EP
(extended mode)
DVD-RW: When a blank disc is first inserted, the
message “Do you want to initialize this disc?”
will appear.
When YES is selected, the disc will be
formatted in VR Mode.
Characteristic
about 2 Mbps
Select when a longer
recording time is
required.
Approx. 6 hours/
about 1.2 Mbps
Approx. 8 hours/
about 0.8 Mbps
FR
for timer recording only Approx 60 to 480 Min
(Flexible Recording) see page 49.
Approx 0.8 to 8Mbps
Unrecordable video
Video with copy protection cannot be recorded on this
DVD Recorder.
When the DVD Recorder receives a copy guard signal
while recording, recording stops and the following
message appears on the screen.
Uninitialized Disc
Do you want to initialize this disc?
Yes
No
Recording
If you want to format in either VR Mode or
Video Mode, refer to Formatting a Disc on
page 85.
DVD-RW(VR)
Disc Manager
Disc Name
:
√
Disc Protection
: Not Protected
√
Disc Format
: DVD-VR
Choose the recording format for DVD-RW.
Disc manager
Disc Finalise
√
Disc Navigation
Playlist
Programme
Delete
All Title Lists
DVD-VR
DVD-V
√
√
Setup
MOVE
You cannot record copy protected movie.
OK
RETURN
EXIT
DVD-R: Formatting DVD is unnecessary and only Video
Mode Recording is supported
Concerning Copy Control Signals
TV broadcasts that contain copy control signals may
have one of the following three signal types, Copy-Free,
Copy-Once and Copy-Never. If you want to record a
copy-once type programme, use DVD-RW with CPRM
in VR Mode and DVD-RAM.
Signal type Copy-Free
DVD-RW(Video mode)/-R
●
●
Chapters will be created automatically when you
finalise recording on DVD-R / DVD-RW discs in Video
mode with the Chapter Creator has been set to On.
The chapter’s length (interval between chapters)
varies according to the recording mode.
Simple editing (erasing titles/changing title name)
DVD-RW(VR mode)/-RAM
●
●
This mode allows multiple editing functions (such as
deletion of the whole title, partial deletion of a title, etc.)
Various editing options using a created Playlist
Recording Mode
Select one of four recording modes by pressing the REC
MODE button repeatedly while the unit is in Stop mode for
the desired recording time and picture quality.
In general, picture quality improves as the recording time
decreases. In FR mode, the most suitable record mode is
adjusted automatically, according to remaining time on the
disc and length of the timer recording.
This function is selected only one mode in XP, SP, LP and
EP modes and you can use this mode for timer recording.
42- English
Copy-Once
Copy-Never
O
-
-
VR mode
O
O*
-
Media
DVD-RW(Ver.1.1)
DVD-RW(Ver.1.1)
with CPRM
Video mode
O
-
DVD-R
O
-
DVD-RAM(Ver.2.0)
O
O*
-
Once “Copy Once” has been recorded, recording
cannot be done anymore.
- Content Protection for Recordable Media (CPRM)
CPRM is a mechanism that ties a recording to the
media on which it is recorded. It is supported by some
DVD recorders, but not by many DVD players. Each
blank recordable DVD has a unique 64-bit media ID
etched in the BCA. When protected content is recorded
onto the disc, it can be encrypted with a 56-bit C2
(Cryptomeria) cipher derived from the media ID.
During playback, the ID is read from the BCA and used
to generate a key to decrypt the contents of the disc.
If the contents of the disc are copied to other media, the
ID will be absent or wrong and the data will not be
decryptable.
1-00687A-R120-UK_43~52
3/10/05
5:23 PM
Page 43
About INFO Key
Recording the current TV
programme you are
watching
The INFO function allows you to view the current status
and progress of playback and recording. Depending on
the disc type and status, the displayed screen may be
different.
Before you start
Check that the disc has enough available space for the
recording. Adjust the recording mode.
Checking the available disc
space (Disc Information)
When recording on an used disc, make sure that there
is enough disc space for recording. With DVD-RWs or
DVD-RAMs, you can free up disc space by erasing
titles.
●
Press the INFO button.
The display window of disc information appears.
Items in the display differ depending on the disc type
or recording format.
DVD-RAM(VR)
Disc Name
Disc
4
5
6
Total Title
Total Playlist
Recordable Time
Protection
Screen
01 JAN 2005 SAT
15
2
02:12 SP
Not Protected
Recording : PR 1 [SP]
12:00
Disc Info
2
the OPEN/CLOSE button to close
2 Press
the disc tray.
7
1. Disc Type
2. Current information display status
3. Disc Name
4. Total Titles : Total number of titles
5. Total Playlist : Total number of Playlists
6. Recordable Time : The longest continuous
recording time in each of the recording
modes(approximate)
7. Date : Current date and time
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RAM disc is used, you will be
prompted to format first. Make your selection using
the œ √ buttons, then press OK button.
(See page 42.)
Unformatted Disc
Do you want to format this disc?
Yes
No
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. Make your selection,
then press the OK button. (See page 42.)
Uninitialized Disc
Do you want to initialize this disc?
Yes
No
English -43
Recording
1
3
the OPEN/CLOSE button and place
1 Press
a recordable disc on the disc tray.
1-00687A-R120-UK_43~52
3/10/05
5:23 PM
Page 44
the PROG ( / ) or number
( ~ ) buttons to select the current
3 Press
programme you want to record.
the REC MODE button repeatedly,
(or press the REC MODE button, then
4 Press
press the …† button) to select the
To stop recording
Press the STOP ( ) button to stop or finish a
recording in progress.
● When using DVD-RAM/DVD-RW/DVD-R discs, the
message ‘Updating the information of disc.
Please wait for a moment’ is displayed.
recording speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
■
You can not change the recording mode
and the PROG while recording.
■
Recording will stop automatically if there
is no free space left for recording.
■
Up to 99 titles can be recorded onto a
disc.
■
Recording will stop automatically if a copy
protected image is selected.
■
DVD-RAM/DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.
■
Do not use DVD-R authoring discs with
this unit.
NOTE
Record Mode SP (02:12)
5 Press the REC button.
Information concerning the channel is displayed on
the screen, then recording begins.
Icon( ) is displayed on the front panel.
(DVD-R120 :
, DVD-R121/DVD-R122 : REC)
Recording
Recording : PR 1 [SP]
To view the current status of the disc and progress of
recording : Press the INFO button, the information
about the disc will appear.
DVD-RAM(VR)
Disc Name
Total Title
Total Playlist
Recordable Time
Protection
Screen
01 JAN 2005 SAT
Disc Info
15
2
02:12 SP
Not Protected
Recording : PR 1 [SP]
12:00
Press the INFO button once again to view
information about the recording.
DVD-RAM(VR)
Name
Recording Info
01/JAN/2005 12:00 PR
1
Recording Title
15
Created Time
01/JAN/2005 12:00
Recording Time
00:02:05
01 JAN 2005 SAT
12:00
44- English
1-00687A-R120-UK_43~52
3/10/05
5:23 PM
Page 45
Recording from external
equipment you are
watching
5 Press the REC button.
To pause recording
Press the
●
●
Before you start
Check that the disc has enough available space for the
recording. Adjust the recording mode.
the OPEN/CLOSE button, place a
1 Press
recordable disc on the disc tray.
button to pause a recording in progress.
Press the
button again to resume
recording.
You can switch channels by pressing the PROG
(
/
) buttons while recording pauses.
To stop recording
Press the STOP ( ) button to stop or finish a
recording in progress.
● When using DVD-RAM/DVD-RW/DVD-R discs, the
message ‘Updating the information of disc.
Please wait for a moment’ is displayed.
the OPEN/CLOSE button to close
2 Press
the disc tray.
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to
format or not will be asked first. (See page 42)
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 42)
The front panel display changes in the following
sequence:
You can not change the recording mode
and input source while recording or
Pause.
■
Recording will stop automatically if
there is no free space left for recording.
■
Up to 99 titles can be recorded onto a
disc.
■
Recording will stop automatically if a
copy protected image is selected.
■
DVD-RAM/DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.
■
Do not use DVD-R authoring discs with
this unit.
NOTE
➞ PR Number ➞ AV1 ➞ AV2 ➞ AV3 ➞ DV
If you connect a digital camcorder, press the
INPUT button to select DV. (See page 46)
the REC MODE button repeatedly,
4 Press
(or press the REC MODE button, then
press the …† button) to select the
recording speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
Record Mode SP (02:12)
English -45
Recording
3
Press the INPUT button to select the input
source according to the connection you
made.
■
1-00687A-R120-UK_43~52
3/10/05
5:23 PM
Page 46
Copying from a
Camcorder (only DVDR120/DVD-R121)
You may control the Camcorder using the IEEE1394
(DV) interface.
the Play icon on the upper part of the
5 Select
screen to playback the camcorder and find
the starting position to copy.
You can press the PLAY button of the remote control
to play the camcorder.
To start recording, use the œ √ to select
6 (press
● ) icon in the top side of the screen, then
the OK button.
You can press the REC button of the remote control
to start recording. To display playback related icons
on the screen, press any direction button on the
remote control.
Before you start
Check that the disc has enough available space for
the recording. Adjust the recording mode.
1
Press the OPEN/CLOSE button, place a
recordable disc on the disc tray.
To stop recording
Press the STOP ( ) button to stop or finish a
recording in progress.
● When using DVD-RAM/DVD-RW/DVD-R discs, the
message ‘Updating the information of disc. Please
wait for a moment’ is displayed
Recording
the OPEN/CLOSE button to close
2 Press
the disc tray.
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to
format or not will be asked first. (See page 42.)
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 42.)
the REC MODE button repeatedly,
3 Press
(or Press the REC MODE button, then
press the …† button) to select the
■
You can not change the recording mode and
input source while recording.
■
Recording will stop automatically if there is
no free space left for recording.
■
Up to 99 titles can be recorded onto a disc.
■
Recording will stop automatically if a copy
protected image is selected.
■
DVD-RAM/DVD-RW discs must be
formatted before starting to record. Most
new discs are sold unformatted.
■
Do not use DVD-R authoring discs with this
unit.
NOTE
recording speed(quality).
➞
SP ➞ LP ➞ EP ➞ XP
Record Mode SP (02:12)
4 Press the INPUT button to select DV.
If the input is set to DV, a playback/record menu that
enables camcorder control appears on the top of the
screen.
DV
The DV device is connected.
MOVE
46- English
OK
RETURN
1-00687A-R120-UK_43~52
3/10/05
5:23 PM
Page 47
To view the current status of the disc and progress
of recording : Press the INFO button, and
information about the disc will appear.
Making a One Touch
Recording (OTR)
DVD-RAM(VR)
Disc Name
Disc Info
Total Title
Total Playlist
Recordable Time
Protection
Screen
01 JAN 2005 SAT
You can set the DVD Recorder to record in 30-minute
increments by pressing the REC button.
15
2
02:12 SP
Not Protected
Recording : PR 1 [SP]
12:00
Press the INFO button once again.
Then you can check the information about the title
being recorded.
you want to record a TV channel, press
PROG ( / ) or number buttons to
1 Ifthe
select a desired channel.
DVD-RAM(VR)
Name
Recording Info
01/JAN/2005 12:00 PR
1
Recording Title
15
Created Time
01/JAN/2005 12:00
Recording Time
00:02:05
01 JAN 2005 SAT
12:00
If you want to record through a
connected external component, press the
INPUT button to select an appropriate
external input (AV1, AV2, AV3 or DV).
●
TV PROGRAMME: 1 to 99
2 Press the REC button to start recording.
OTR Mode
30 seconds before the recording is done, a
message asking whether you want the recorder to
power off when the recording is done, will appear
on your screen.
0:30
Recording
OTR is going to be ended soon
and power will be turned off automatically.
Press [OK] button to continue to use DVD-Recorder.
OK
the REC button repeatedly to adjust
3 Press
the desired recording time.
➞ 0:30 ➞ 1:00 ➞ ... 8:00 ➞ Off
To stop recording
Press the STOP ( ) button. The message “Do you
want to stop recording?” is displayed.
■
NOTE
The timer counter decreases by the
minute from 8:00 to 0:00, then the DVD
Recorder stops recording.
Do you want to stop recording?
Yes
●
●
No
Press the œ √ buttons to select Yes, then press the
OK button.
Or press the STOP button again.
English -47
1-00687A-R120-UK_43~52
3/10/05
5:23 PM
Page 48
• Source : The video input source (“AV1”, “AV2”,
“AV3”), or the broadcasting
channel you want to make a timer
recording from.
Making a Timer Recording
• Date : Timer Recording allows setting the
recording time within one month period. Set the
recording day. (day/month)
Before you start
1. Check the antenna cable is connected.
2. Check the remaining time of the disc.
3. Check the date and time are correct.
Make sure the Clock (Setup-Clock Set) must be set
before you proceed with a timer recording.
(See page 27)
1
DVD-RAM(VR)
Playlist
√
Timer Record
√
Video Plus+ Extended : Off
√
Disc manager
Programme
Setup
MOVE
OK
RETURN
EXIT
Recording
Using the MENU button.
●
●
●
2
With the unit in Stop mode, press the MENU
button.
Press the …† buttons to select Programme, then
press the OK or √ button.
Press the …† buttons to select Timer Record.
- If you set this function on, you can control the
starting and ending time of recording by special
signal included in the broadcasting signal.
If a TV programme is shortened or starts earlier or
later than scheduled, this function synchronizes
the starting and ending time of recording with the
actual broadcasting time automatically.
- Set up the start-time EXACTLY according to the
published TV schedule. Otherwise the timer
recording will not take place.
- Do not select PDC unless you are sure the
programme you wish to record is broadcast with
PDC.
• The Timer Recording screen is displayed.
Scheduled Record List
Recordable Time 02:12 SP
No. Source
Date
Start
End Mode PDC Edit
No. 01
√
01 -- -- -- - -- --:-- --:-- -- -Source
Date
Start
End Mode PDC
PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP
Off
Recordable Time 02:12 SP
MOVE
OK
RETURN
EXIT
3 Set timer recording option.
• Fill the input items using the arrow buttons and
number buttons.
œ √ : Moves to the previous/next item,
…†, 0~9 : Sets a value.
48- English
Every SAT
Every SUN
• PDC : PDC(Programme Delivery Control)
function.
Press the OK or √ button.
DVD-RAM(VR)
30/JAN(SUN)
31/JAN(MON)
• Mode (Recording Mode) :
- FR (Flexible Recording) : Select when you want to
set video quality automatically.
In FR mode, the most suitable record mode is
adjusted automatically, according to remaining
time on the disc and length of the timer recording.
This function is selected only one mode in XP, SP,
LP and EP modes.
- XP (high quality) : Select when video quality is
important. (Approx. 1 hour)
- SP (standard quality) : Select to record in standard
quality. (Approx. 2 hours)
- LP (low quality) : Select when a long recording
time is required.(Approx. 4 hours)
- EP (extended) : Select when a longer recording
time is required. (Approx.6 hours or 8 hours)
Timer Record
Video Plus+
Every Day
MON-SAT
MON-FRI
• Start/End Time : Start and end time of the timer
recording.
With the unit in Stop mode, press the
TIMER button.
Disc Navigation
01/JAN(SAT)
02/JAN(SUN)
03/JAN(MON)
■
NOTE
When you are recording at EP mode on a
DVD-RW(V)/R disc, it may not record the
full 6 or 8 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING
system. For example, if you record a
program with a lot of action, it uses a
higher bit rate which in turn consumes
more disc memory.
1-00687A-R120-UK_43~52
3/10/05
5:23 PM
Page 49
4 Press the OK button.
●
will appear on the front panel. It means that a
timer recording is registered.
If the timer settings overlap
The programmes are recorded in order of priority.
If timer recording is set for the first programme
and then again for the second programme and
both programmes overlap, the following message
will appear on the screen: “This setting is identical
with 1”The message shows that the first
programme has priority. After recording of the first
program is complete, the second program starts
being recorded.
To exit without saving the current setting
Press the MENU button.
To return to the previous menu
Press the RETURN button if you don’t want to set
a timer recording.
Editing the Scheduled
Record List
Follow these directions to edit the timer record list.
the unit in Stop mode, press the
1 With
TIMER button.
DVD-RAM(VR)
Disc Navigation
Playlist
5
Turn the power off to finish the Timer
Recording setting. Timer Recording will
not work when the power is on.
●
Timer Record
Video Plus+
√
Timer Record
√
Video Plus+ Extended : Off
√
Disc manager
Programme
Setup
will blink if disc is not inserted.
MOVE
■
NOTE
You can make the Timer Recording up to
12 programmes.
RETURN
EXIT
Using the MENU button.
●
●
●
With the unit in Stop mode mode, press the MENU
button.
Press the …† buttons to select Programme, then
press the OK or √ button.
Press the …† buttons to select Timer Record.
2 Press the OK or √ button.
the RETURN button to close the
3 Press
Timer Recording screen.
DVD-RAM(VR)
Scheduled Record List
Recordable Time 02:12 SP
No. Source
Date
Start
End Mode PDC Edit
No. 01
√
01 -- -- -- - -- --:-- --:-- -- -Source
Date
Start
End Mode PDC
Flexible Recording
(for Timer recording only)
PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP
MOVE
In FR mode, the most suitable record mode is adjusted
automatically, according to remaining time on the disc and
length of the timer recording. This function is selected only
one mode in XP, SP, LP and EP modes and you can use
this mode for timer recording.
The FR mode recording setup is the same as Timer
Recording. When setting the mode in step 3, set FR
Mode.
Off
Recordable Time 02:12 SP
OK
RETURN
EXIT
the …† buttons to select the number
4 Press
of the timer recording you want to edit, then
press the OK or √ button.
●
The Edit and Delete items are displayed.
DVD-RAM(VR)
Scheduled Record List
Recordable Time 02:12 SP
No. Source
Date
Start
End
Mode PDC Edit
01 PR 01 01 JAN 12 : 00 14 : 00 SP
02 -- -- -- - -- --:-- --:-- --
MOVE
OK
RETURN
Off
Edit √
-Delete √
EXIT
English -49
Recording
■
The timer recording time may differ from
the set time depending on disc status
and overall timer recording status (for
example, recording times overlapping, or
when the previous recording ends within
2 minutes before the start time of the next
recording.)
OK
1-00687A-R120-UK_43~52
3/10/05
5:23 PM
Page 50
the …† buttons to select Edit, then
5 Press
press the OK or √ button.
●
the RETURN button to close the
3 Press
Timer Recording screen.
The Timer Record Input item is displayed.
Edit the items you want to modify.
See the “Making a Timer Recording” section for
more information on Timer Recording Input items.
DVD-RAM(VR)
Scheduled Record List
Recordable Time 02:12 SP
No. Source
Date
Start
End Mode PDC Edit
No. 01
√
01 -- -- -- - -- --:-- --:-- -- -Source
Date
Start
End Mode PDC
PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP
DVD-RAM(VR)
Scheduled Record List
Off
Recordable Time 02:12 SP
Recordable Time 02:12 SP
No. Source
Date
Start
End Mode PDC Edit
No. 01
√
01 -- -- -- - -- --:-- --:-- -- -Source
Date
Start
End Mode PDC
PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP
MOVE
OK
RETURN
EXIT
Off
Recordable Time 02:12 SP
MOVE
OK
RETURN
EXIT
the …† buttons to select the number
4 Press
of the timer recording you want to delete,
then press the OK or √ button.
●
the OK button to confirm the
6 Press
edited setting.
The Edit and Delete items are displayed.
DVD-RAM(VR)
Scheduled Record List
Recordable Time 02:12 SP
No. Source
Date
Start
End
Mode PDC Edit
01 PR 01 01 JAN 12 : 00 14 : 00 SP
02 -- -- -- - -- --:-- --:-- --
the MENU button after finishing the
7 Press
operation. The menu screen will disappear.
Recording
MOVE
Deleting the Scheduled
Record List
OK
RETURN
Off
Edit √
-Delete √
EXIT
Press the …† buttons to select Delete,
5 then
press the OK or √ button.
●
You will be prompted with the delete confirm
message such as ‘Do you want to delete
No.01?’.
the œ √ buttons to select Yes, then
6 Press
press the OK button.
●
Follow these directions to delete an entry from the timer
record list.
the unit in Stop mode, press the
1 With
TIMER button.
Using the MENU button.
●
●
●
With the unit in Stop mode mode, press the MENU
button.
Press the …† buttons to select Programme, then
press the OK or √ button.
Press the …† buttons to select Timer Record.
2 Press the OK or √ button.
50- English
The selected entry will be deleted from the list.
the MENU button after finishing the
7 Press
operation. The menu screen will disappear.
1-00687A-R120-UK_43~52
3/10/05
5:23 PM
Page 51
Using the Video Plus+
Feature
3 Press the OK button.
●
●
Before presetting your DVD Recorder:
• Switch on both the television and your DVD Recorder.
• Check that the date and time are correct.
Up to twelve programmes can be preset.
The information concerning the programme is
displayed.
When using the Video Plus+ function for the
first time with stored stations, the programme
number flashes. This one time, you must enter
the PR number manually by pressing the
…† buttons or number buttons.
DVD-RAM(VR)
Scheduled Record List
Recordable Time 02:12 SP
No. Source
Date
Start
End Mode PDC Edit
No. 01
√
01 -- -- -- - -- --:-- --:-- -- -Source
Date
Start
End Mode PDC
PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP
Off
Recordable Time 02:12 SP
the unit in Stop mode, press the
1 With
TIMER button. Press the …† buttons to
select Video Plus+, then press the OK or
MOVE
√ button.
OK
RETURN
DVD-RAM(VR)
EXIT
Scheduled Record List
Recordable Time 02:12 SP
●
No. Source
A message is displayed to allow you to enter the
Video Plus+ code.
Date
Start
End
Mode PDC Edit
01 PR 01 01 JAN 12 : 00 14 : 00 SP
02 -- -- -- - -- --:-- --:-- --
Off
--
√
√
DVD-RAM(VR)
Disc Navigation
Playlist
MOVE
OK
RETURN
EXIT
(Press [OK] button : Make Code.)
Disc manager
Programme
the programme and times are correct,
4 Ifpress
the OK button.
Setup
OK
RETURN
EXIT
●
●
With the unit in Stop mode, press the MENU
button.
Press the …† buttons to select Programme, then
press the OK or √ button twice.
the power off by pressing the
5 Turn
STANDBY/ON button to activate the timer
recoding setting.
6 Refer to pages 48~50 if you want to:
●
2
Press the number buttons to enter the
code of the programme that you want to
record in your television magazine.
●
●
●
If you want to correct the Video Plus+ code that
you are entering:
Press the œ button until the digit to be corrected
is cleared.
Enter the correct digit.
●
Check whether the timer Recording has set
correctly or not.
Cancel a preset recording.
■
The numbers next to each TV programme
listing in the magazines or newspapers
are Video Plus+ code numbers, which
allow you to programme your DVD
Recorder instantly with the remote
control. Enter the Video Plus+ code for
the programme you wish to record.
■
Video Plus+ is a trademark of Gemstar
Development Corporation. The Video
Plus+ system is manufactured under
licence from Gemstar Development
Corporation.
NOTE
English -51
Recording
Using the MENU button.
1-00687A-R120-UK_43~52
3/10/05
5:23 PM
Page 52
Video Plus+ Extended
Recording the Standard
Timer List
To prevent delays or overruns, DVD Recorder has a
function called Video Plus+ Extened allowing you to
extend the recording time by up to 60 minutes.
When the start time in the Scheduled record list
reaches while the set is in power off, the set will be
powered on and start the recording automatically.
the unit in Stop mode, press the
1 With
MENU button.
the scheduled recording is operating,
1 When
the programme being recorded will not
display on TV.
●
DVD-RAM(VR)
Disc Navigation
Playlist
Disc manager
Disc Navigation
Title List
√
DivX
√
Photo
√
Music
√
●
Press the TV/DVD button if you want to see the
programmed being recorded on TV.
Press the TV/DVD button again if you don’t want to
see the programmed being recorded on TV.
Programme
To stop Recording
Setup
MOVE
OK
RETURN
Press the STOP( ) button, and a message that asks
whether to end recording or not will be displayed.
EXIT
Press the …† buttons to select Programme,
2 then
press the OK or √ button.
Recording
Do you want to stop recording?
DVD-RAM(VR)
Disc Navigation
Playlist
Yes
Timer Record
Video Plus+
√
Timer Record
√
Video Plus+ Extended : Off
√
No
Disc manager
Programme
Setup
●
●
MOVE
OK
RETURN
EXIT
the …† buttons to select Video
3 Press
Plus+ Extended, then press the OK or √
button
DVD-RAM(VR)
Disc Navigation
Playlist
When Yes is selected: Recording stops
When No is selected: Recording continues
■
NOTE
If there is not enough disc space or a
copy prevention signal is received during
recording, recording will stop.
Timer Record
Video Plus+
√
Timer Record
√
Off
Video Plus+ Extended : Off
10
Disc manager
√
20
30
Programme
You cannot record copy protected movie.
40
Setup
50
60
MOVE
4
OK
RETURN
EXIT
Press the …† buttons to select Video Plus+
Extended time, then press the OK or √
button.
the MENU button after finishing the
5 Press
operation.
52- English
■
If there is no free disc space or the disc is
not recordable, recording will not operate.
(You can record after replacing the disc.)
1-00687A-R120-UK_53~71
3/10/05
5:29 PM
Page 53
Before Playing
Playback
Read the following information before playing a disc.
Region code (DVD-Video only)
Both the DVD recorder and the discs are
coded by region. These regional codes must
match in order for the disc to play. If the codes
do not match, the disc will not play.
The Region Number for this DVD Recorder is
described on the rear panel of the DVD Recorder.
This section introduces basic functions of playback
and playback by disc type.
Disc types that can be played
Disc Types
DIGITAL OUT
Dolby Digital
DTS
Digital Audio
DVD-VIDEO
AUDIO + VIDEO
AUDIO-CD
AUDIO
DVD-RAM
AUDIO + VIDEO
DVD-RW
AUDIO + VIDEO
DVD-R
AUDIO + VIDEO
JPEG
MP3
MPEG4
CD-R/RW
DVD-R/RW/RAM
Stereo
PAL broadcast
system in U.K,
France, Germany, etc.
■
NOTE
DivX
Disc Shape Max. Playing Time
Single sided(12cm)
240
Double sided(12cm)
480
Single sided(8cm)
80
Double sided(8cm)
160
Single sided(12cm)
74
Single sided(8cm)
20
1 (XP: Excellent Quality)
Single-sided 2 (SP: Standard Quality)
12cm (4.7GB) 4 (LP: Long Playback)
6 or 8 (EP:Extended)
2 (XP: Excellent Quality)
Double-sided 4 (SP: Standard Quality)
12cm (9.4GB) 8 (LP: Long Playback)
12 or 16 (EP:Extended)
1 (XP: Excellent Quality)
2 (SP: Standard Quality)
12cm (4.7GB)
4 (LP: Long Playback)
6 or 8 (EP:Extended)
1 (XP: Excellent Quality)
2 (SP: Standard Quality)
12cm (4.7GB)
4 (LP: Long Playback)
6 or 8 (EP:Extended)
-
-
Depending on the disc type, it may take
up to one minute to load.
MP3
Discs that cannot be played
Before Playing...................................................53
●
Playing a Disc ...................................................54
●
Playing an Audio CD/MP3 ..............................63
●
Playing a Picture ..............................................67
●
●
Playing a MPEG4.............................................68
●
Playing the Title List..........................................69
●
DVD-Video with a region number other than “2” or
“ALL”
12cm 2.6 GB and 5.2 GB DVD-RAM
3.9 GB DVD-R Disc for Authoring.
DVD-RAM, DVD-RW(VR mode) not recorded
following the Video Recording Standard
Unfinalised DVD-R, unfinalised DVD-RW(V mode)
recorded on other equipment.
DVD-ROM/DVD+RW/PD/MV-Disc, etc
Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I
English -53
Playback
D I G I TA L
Disc Logo Recorded content
1-00687A-R120-UK_53~71
3/10/05
5:29 PM
Page 54
■
This DVD recorder can only operate with
discs that are compatible with DVD-RAM
Standard Version 2.0.
■
Playback and/or recording may not work
for some types of discs, or when specific
operations, such as angle change and
aspect ratio adjustment, are being
performed. Information about the discs is
written in detail on the box. Please refer
to this if necessary.
NOTE
■
Do not allow the disc to become dirty or
scratched. Fingerprints, dirt, dust,
scratches or deposits of cigarette smoke
on the recording surface may make it
impossible to use the disc for recording.
■
DVD-RAM/RW/R discs may not be able to
play on some DVD Recorders, depending
on the player, disc and the condition of
the recording.
a disc gently into the tray with the
2 Place
disc’s label facing up.
the OPEN/CLOSE button to close
3 Press
the disc tray.
Your DVD Recorder closes the disc tray and plays
the disc automatically.
● The recorder does not play discs automatically after
the initial power on.
● When the recorder is powered on and a disc is in
the tray, the unit will be activated and wait in stop
status.
● Press the PLAY button to start playback.
● If you insert a MP3 Disc, your DVD Recorder will
display the file list on the screen and start playing.
● If you insert a JPEG Disc, folders and a file list are
displayed.
● If you want the unit to play automatically when it is
powered on with a disc in the unit, power on with
the PLAY button.
●
4 Press the STOP button to stop playback.
Playback
Playing a Disc
■
When you stop playing disc, the recorder
remembers where you stopped. When
you press the PLAY button again, it will
pick up where you left off. (unless the disc
is removed or the DVD Recorder is
unplugged, or if you press the STOP
button twice.) This function is only
applicable to DVD-VIDEO, DVD-RAM,
DVD-RW, DVD-R or audio CDs (CD-DA).
■
Do not move your DVD Recorder while
playing, as this may cause damage to the
disc.
■
Make sure to press the OPEN/CLOSE
button to open or close the disc tray.
■
Do not push the disc tray while it is being
opened or closed, as this may cause a
product malfunction.
■
Do not place foreign materials on or in the
disc tray.
■
Some functions may perform differently or
be disabled depending on the disc type.
If this occurs, refer to the instructions
written on the disc case.
■
Be especially careful that children's
fingers are not caught between the disc
tray and the tray chassis when it closes.
■
You must only insert one DVD disc at a
time. Inserting two or more discs will not
allow playback and may cause damage to
the DVD player.
NOTE
CAUTION
1
Press the OPEN/CLOSE button.
54- English
1-00687A-R120-UK_53~71
3/10/05
5:29 PM
Page 55
Using the Search Functions
Using the Disc Menu & Title Menu
Some discs contain a dedicated menu system that
allow you to select special functions for the title, such
as chapters, audio tracks, subtitles, film previews,
information on characters, etc.
For DVD-VIDEO discs
the DISC MENU button to enter the
1 Press
disc menu of the disc.
Searching through a Chapter or Track
Move to the setup menu related to the playback
operation.
● You can select the audio languages and the
subtitles provided by the disc.
●
the TITLE MENU button to move to
2 Press
the title menu of the disc.
●
Use this button if the disc contains more than one
title. Some type of discs may not support the title
menu function.
play, press the SEARCH (
1 During
button on the remote control.
DVD-VIDEO/
DVD-RAM/
DVD-RW/DVD-R
For DVD-RAM/RW/R discs
the TITLE LIST button to move to the
1 Press
Title List.
MPEG4
AUDIO
CD(CDDA)
●
)
Fast X 2 ➞
Fast X 4 ➞
Fast X 8 ➞
Fast X 16 ➞
Fast X 32 ➞
Fast X 128 ➞
Fast X 2
X2➞
X4➞
X8➞
X2➞
X4➞
X8➞
X2
You can scan the programme in reverse.
To return to normal speed playback, press the
button.
■
NOTE
Play List: This refers to a unit of
playback, which is made by
selecting a desired scene in
the entire Title List. When one
playlist is played, only the
scene selected by the user will
play and then stop. Since only
the information necessary for
playing a desired scene is
included in a playlist, even if
that playlist is deleted, the
original recording will not be
deleted. (only VR mode)
●
When you press and hold the SEARCH button.
(
), playback is done at the default speed of 4X.
If you release the SEARCH button, playback is
performed at a normal speed.
●
The speed marked in this function may be different
from the actual playback speed.
■
NOTE
No sound is heard during Scan(Search)
mode, except CDs (CD-DA).
English -55
Playback
■
Title List: Title List shows a list to help
you select a title. Since the title
list consists of the information
on video that is actually
recorded, if one title is deleted,
that title cannot be played
again.
1-00687A-R120-UK_53~71
3/10/05
5:29 PM
Page 56
About ANYKEY
Skipping Chapters or Tracks
●
During play, you can search quickly
through a chapter or track.
play, press the SKIP (
1 During
button on the remote control.
●
)
If you press the ❙œœ button,
it moves to the beginning of the chapter or track or
marker(DVD-RAM, DVD-RW(VR mode)).
Pressing the button once again within 3 seconds
returns to the beginning of the previous chapter or
track or marker(DVD-RAM, DVD-RW(VR mode)).
●
The ANYKEY function allows you to easily search for a
desired scene by accessing title, chapter, track, time.
You can also change the subtitle and audio
settings and set some features including Repeat, Angle,
Zoom.
If you press the √√❙ button,
it moves to the next chapter or track or marker
(DVD-RAM,DVD-RW(VR mode)).
Moving to a scene directly using the ANYKEY
Slow Motion Play
●
or step mode, press the SEARCH (
) button on the remote control.
1 In pause
●
If you press the √√ button,
Slow 1/8 ➞
●
Playback
Slow 1/2
If you press the œœ button,
Slow 1/8 ➞
●
Slow 1/4 ➞
Slow 1/4 ➞
Slow 1/2
To return to normal speed playback,
press the
button.
Press and hold the SEARCH (
) button during
pause, the disc will play slowly at a 1/4 speed. If the
button is released, the pause operation will resume.
■
NOTE
If you want to move to a title, a chapter
or a track to find a desired scene.
Press the ANYKEY button during
1 playback.
DVD-VIDEO
Title
1/10
Chapter
1/40
Time
ENG
Audio
ENG
Repeat
Off
Angle
1/1
Zoom
Off
MOVE
D 5.1CH
CHANGE
the …† buttons to select Title,
2 Press
Chapter or Track.
The speed marked in this function may be
different from the actual playback speed.
DVD-VIDEO
Title
1/10
Chapter
1/40
Time
Step Motion Play
Press the
button on the remote
control in the still mode.
●
Each time the button is pressed, a new frame will
appear.
When
is pressed, the previous frame will be
activated.
When
is pressed, the next frame will be
activated.
●
To return to normal speed playback, press the
button.
56- English
00:01:45
Subtitle
ENG
Audio
ENG
Repeat
Off
Angle
1/1
Zoom
Off
MOVE
1
00:01:45
Subtitle
D 5.1CH
CHANGE
the œ √ or number (0~9) buttons to
3 Press
select the desired scene.
Press the OK button.
1-00687A-R120-UK_53~71
●
3/10/05
5:29 PM
Page 57
If you want to move to a desired time to
help you find a scene.
Using the Repeat Function
Press the ANYKEY button during
1 playback.
DVD-VIDEO
Title
1/10
Chapter
1/40
Time
00:01:45
Subtitle
ENG
Audio
ENG
Repeat
Off
Angle
1/1
Zoom
Off
MOVE
D 5.1CH
CHANGE
2 Press the …† buttons to select Time.
Title
1/10
1/40
Time
00:01:45
Subtitle
ENG
Audio
ENG
Repeat
Off
Angle
1/1
Zoom
Off
MOVE
Using the REPEAT button
1 Press the REPEAT button during playback.
DVD-VIDEO
Chapter
Playing Repeatedly(Repeat Playback)
D 5.1CH
Repeat
Off
NUMBER
the time in the sequence of hours,
3 Enter
minutes, seconds using the number
buttons, then press the OK button.
■
NOTE
■
The Time Search function does not
operate in some discs.
■
To make the screen disappear, press the
ANYKEY again
Repeat
Playback
This may not work for some discs.
When an audio CD(CD-DA) or an MP3
disc is inserted, according to a disc type,
the information display may not be
appear.
the REPEAT or …† buttons to select
2 Press
Title or Chapter you want to play repeatedly.
Press the OK button.
Title
Chapter : Repeats the chapter that is playing.
Title : Repeats the title that is playing.
- To return to normal playback -
the REPEAT buttons to select Off,
3 Press
then press the …† or REPEAT button and
press OK button.
Press the CANCEL button to return to normal
playback.
English -57
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 58
Using the ANYKEY button
1
Press the ANYKEY button during
playback.
the REPEAT button repeatedly to
2 Press
select Track or Disc you want to play
repeatedly.
CD
Music
Repeat : Track
01. TRACK 1
00 : 52
DVD-VIDEO
Title
1/10
Chapter
1/40
Time
Subtitle
01/12
00:01:45
Off
Audio
ENG
Repeat
Title
Angle
1/1
Zoom
Off
MOVE
Play Option : Normal
D 5.1CH
MOVE
01. TRACK 1
4:39
02. TRACK 2
4:31
03. TRACK 3
4:30
04. TRACK 4
3:53
05. TRACK 5
4:23
06. TRACK 6
4:24
OK
EXIT
CHANGE
To return to normal playback
2
Press the …† buttons to select Repeat,
then press the œ √ buttons to select Title or
Chapter you want to play repeatedly.
For A-B Repeat, refer to page 59.
the REPEAT button repeatedly to
3 Press
select Off.
Press the CANCEL button to return to normal
playback.
DVD-VIDEO
Title
1/10
Chapter
1/40
Time
Subtitle
00:01:45
Off
Audio
ENG
Repeat
Title
Angle
1/1
Zoom
Off
MOVE
Using the ANYKEY button
D 5.1CH
OK
Press the ANYKEY button during
1 playback.
Repeat is highlighted.
3 Press the OK button.
To make the screen disappear, press the ANYKEY or
RETURN button. Repeat play allows you to repeat a
title or chapter.
Playback
■
NOTE
DVD-RAM, DVD-RW(VR mode),
unfinalised DVD-R and unfinalised DVDRW (Video mode) do not repeat a
chapter.
Playing Repeatedly(Repeat Playback)
CD
Music
Repeat : Off
Play Option : Normal
01. TRACK 1
00 : 52
01/12
MOVE
OK
01. TRACK 1
4:39
02. TRACK 2
4:31
03. TRACK 3
4:30
04. TRACK 4
3:53
05. TRACK 5
4:23
06. TRACK 6
4:24
RETURN
EXIT
Press the REPEAT or …† buttons to select
2 Press
Track or Disc you want to play repeatedly.
the OK button.
For MP3 discs, you can select Track,
Folder or Disc.
Using the REPEAT button
1
Press the REPEAT button during playback.
CD
Music
Repeat : Off
Play Option : Normal
01. TRACK 1
00 : 52
01/12
MOVE
58- English
OK
01. TRACK 1
4:39
02. TRACK 2
4:31
03. TRACK 3
4:30
04. TRACK 4
3:53
05. TRACK 5
4:23
06. TRACK 6
4:24
EXIT
- To return to normal playback -
the REPEAT button repeatedly to
select Off.
3 Press
Press the CANCEL button to return to normal
playback.
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 59
Playing a Certain section Repeatedly(A-B Repeat Playback)
Selecting the Subtitle
Subtitle languages may not work depending on the disc
type. This is only available during playback.
(VR mode)
Using the ANYKEY button
Press the ANYKEY button during
1 playback.
Using the SUBTITLE button
the SUBTITLE button during
1 Press
playback.
Subtitle
DVD-VIDEO
Title
1/10
Chapter
1/40
Time
Subtitle
00:01:45
Off
Audio
ENG
Repeat
Title
Angle
1/1
Zoom
Off
MOVE
2
ENG
D 5.1CH
CHANGE
Press the …† buttons to select Repeat, then
press the √ button to select A-B.
the SUBTITLE or …† buttons to
2 Press
select the desired subtitle language.
To make the screen disappear, press the CANCEL or
RETURN button.
DVD-VIDEO
Title
1/10
Chapter
1/40
Time
Subtitle
00:01:45
Off
Audio
ENG
Repeat
A-B
Angle
1/1
Zoom
Off
MOVE
Using the ANYKEY button
D 5.1CH
OK
1
Press the ANYKEY button during
playback.
DVD-VIDEO
3
Press the OK button.
Title
1/10
Chapter
1/40
Time
the OK button at the point where you
want the repeat play to start (A), then press
4 Press
it again at the point where you want the
00:01:45
Off
Audio
ENG
Repeat
Title
Angle
1/1
Zoom
Off
MOVE
Playback
Subtitle
D 5.1CH
CHANGE
repeat play to stop (B).
Repeat playback of the A-B section starts.
- To return to normal playback -
Press the …† buttons to select Subtitle,
2 then
press the œ √ buttons to select the
desired subtitle language.
Select “Off” on the Repeat item.
Press the CANCEL button to return to normal
playback.
DVD-VIDEO
Title
1/10
Chapter
1/40
Time
ENG
Audio
ENG
Repeat
Off
Angle
1/1
Zoom
Off
MOVE
■
NOTE
■
If you set point (B) before five seconds
has lapsed, the prohibition mark ( ) will
appear.
Audio CDs(CDDA) and MP3 discs do not
support the Repeat A-B function.
00:01:45
Subtitle
D 5.1CH
CHANGE
■
The subtitle display may be different
depending on the disc type.
■
If the subtitles overlap, disable the caption
function on your TV.
■
Some discs allow you to select the
language for the disc menu only.
NOTE
English -59
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 60
Selecting the Audio language
Changing the Camera Angle
Audio languages may not work depending on the disc
type. This is only available during playback.
When a DVD-VIDEO contains multiple angles of a
particular scene, you can select the Angle function.
This is only available during playback.
If the disc contains multiple angles, the ANGLE mark
appears on the screen.
(VR mode)
Using the AUDIO button
1
Press the AUDIO button during playback.
Audio
1 Press the ANYKEY button during playback.
ENG Dolby Digital 5.1CH
DVD-VIDEO
Title
1/10
Chapter
1/40
Time
Subtitle
Audio
00:01:45
Off
ENG
Repeat
Off
Angle
1/3
Zoom
Off
MOVE
Press the AUDIO or …† buttons to select
2 the
desired audio language.
D 5.1CH
CHANGE
the …† buttons to select Angle, then
2 Press
press the œ √ or number buttons to select
the desired angle.
DVD-VIDEO
Using the ANYKEY button
Title
1/10
Chapter
1/40
Time
1
Press the ANYKEY button during
playback.
00:01:45
Subtitle
ENG
Audio
ENG
Repeat
Off
Angle
1/3
Zoom
Off
MOVE
D 5.1CH
CHANGE
DVD-VIDEO
Title
1/10
Chapter
1/40
Time
Playback
Subtitle
00:01:45
Off
Audio
ENG
Repeat
Title
Angle
1/1
Zoom
Off
MOVE
Press the …† buttons to select Audio, then
2 press
the œ √ buttons to select the desired
audio language.
DVD-VIDEO
Title
1/10
1/40
Time
ENG
Audio
ENG
Repeat
Off
Angle
1/1
Zoom
Off
MOVE
D 5.1CH
CHANGE
■
Audio languages may be different
depending on the disc type.
■
Some discs allow you to select the audio
language for the disc menu only.
NOTE
60- English
00:01:45
Subtitle
This function is disc-dependent, may not
work on all DVDs.
■
This function does not work when a DVD
has not been recorded with a multicamera angle system.
NOTE
CHANGE
Chapter
■
D 5.1CH
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 61
Zooming-In
Using Bookmarks
This feature lets you bookmark sections of a DVD-VIDEO
or DVD-R/-RW(V mode), so you can quickly find them.
the ANYKEY button during playback
1 orPress
pause.
Press the MARKER button during
1 playback.
DVD-VIDEO
Title
1/10
Chapter
1/40
Time
Subtitle
Audio
00:01:45
Off
ENG
Repeat
Off
Angle
1/1
Zoom
Off
MOVE
(V mode)
Bookmark
D 5.1CH
CHANGE
MOVE
OK
RETURN
the …† buttons to select Zoom, then
2 Press
press the OK button. ( ) will be displayed.
the OK button when the desired
2 Press
scene appears.
The number 1 is displayed and the scene is
memorized.
Bookmark
the …† œ √ buttons to move to the
3 Press
area you want to enlarge.
the OK button. The screen will be
4 Press
enlarged to twice the normal size.
➞
normal size ➞ 2X ➞ 4X ➞ 2X
PLAY
CANCEL
RETURN
Press the œ √ button to move to the next
3 position.
the OK button when the desired
4 Press
scene appears.
The number 2 is displayed and the scene is
memorized.
■
NOTE
When the recording is done in EP mode,
the Zoom function is not supported except
when the recording has been done in V
mode.
Bookmark
MOVE
●
●
1 2
PLAY
CANCEL
RETURN
Repeat above to bookmark other positions.
You can bookmark up to 10 scenes.
■
NOTE
When the disc tray is opened and then
closed, bookmarks will disappear.
English -61
Playback
If you press the OK button again after the screen was
enlarged to twice the normal size, the screen size will
be enlarged to four times the normal size.
MOVE
1
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 62
Using Markers
Playing back a bookmark
Press the MARKER button during
1 playback.
the œ √ buttons to select a
2 Press
bookmarked scene.
(VR mode)
the MARKER button during
playback.
1 Press
N:0
Marker
Bookmark 1 2
OK
MOVE
3
PLAY
CANCEL
RETURN
RETURN
Press the OK or
button to start
playing from the selected scene.
the OK button when the desired
2 Press
scene appears.
The number 01 is displayed and the scene is
memorized.
Clearing a bookmark
Marker
Press the MARKER button during
1 playback.
MOVE
01
PLAY
N:1
CANCEL
RETURN
the œ √ buttons to select a
2 Press
bookmarked scene.
the œ √ button to move to the next
position.
3 Press
Playback
Bookmark 1 2
the OK button when the desired
4 Press
scene appears.
MOVE
PLAY
CANCEL
The number 02 is displayed and the scene is
memorized.
RETURN
Marker
01 02
N:2
Press the CANCEL button to delete the
3 selected
bookmark.
Bookmark
1
MOVE
●
MOVE
62- English
OK
RETURN
PLAY
CANCEL
RETURN
DVD-RAM or DVD-RW (VR Mode) discs have the
Marker function instead of the Bookmark function.
The Marker function allows you to mark up to 99
scenes. Since the scenes may be displayed as many
different pages, numbering is necessary. If a disc in
use is encoded with Disc Protection, Markers cannot
be set or deleted. Only playback is available.
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 63
Playing back a Marker
Playing an Audio CD/MP3
Press the MARKER button during
1 playback.
Playing an Audio CD (CD-DA)/MP3
the œ √ buttons to select a
2 Press
bookmarked scene.
Marker
01 02
Each disc has a variety of menu functions available.
N:2
Playing an Audio CD(CD-DA)
MOVE
3
●
●
PLAY
CANCEL
RETURN
Press the OK or
button to start
playing from the selected scene.
an audio CD (CD-DA) into the disc
1 Insert
tray.
The audio CD menu appears and the tracks (songs)
are played automatically.
CD
If you press the button, it moves to the beginning of
the marker. Pressing the button once again within 3
seconds returns to the beginning of the previous
marker.
If you press the button, it moves to the next
marker.
Press the MARKER button during
1 playback.
01. TRACK 1
00 : 52
01/12
MOVE
selected bookmark.
4:31
03. TRACK 3
4:30
04. TRACK 4
3:53
05. TRACK 5
4:23
06. TRACK 6
4:24
OK
EXIT
Audio CD(CD-DA) Screen Elements
CD
01 02 03 04 05 06 07 08 09 10 N:10
01 02 03 04 05 06 07 08 09
N:9
Music
Repeat : Off
00 : 52
01/12
CANCEL
RETURN
When a marker is cleared while DVD-RAM/-RW (VR
mode) is playing, marker numbers will change.
For example, if the 7th marker is cleared after ten
markers are registered, the marker numbers after
the eighth will automatically move ahead by one and
the 8th marker becomes the 7th.
01. TRACK 1
4:39
02. TRACK 2
4:31
03. TRACK 3
4:30
04. TRACK 4
3:53
05. TRACK 5
4:23
06. TRACK 6
MOVE
PLAY
Play Option : Normal
01. TRACK 1
3
■
4:39
02. TRACK 2
the number buttons to select the
2-2 Press
track (song) and the track (song) is played
automatically.
1
2
MOVE
01. TRACK 1
OK
7
4
5
4:24
EXIT
6
1. Repeat mode: Repeat off/Repeat Track/Repeat Disc
2. Current track (song): Displays the number of the
track currently being played.
3. Displays the current play index and total track
number.
4. This shows the operating state of a disc and a
playback time corresponding to a portion that is
currently played.
5. Displays the track list (song list) and the playing time
of each track.
6. Button display.
7. Play Option: Normal, Random, Intro or Playlist
English -63
Playback
the œ √ buttons to select a
bookmarked scene.
2 Press
Press the CANCEL button to delete the
Marker
Play Option : Normal
the …† buttons to select the track
2-1 Press
you want to hear, then press the OK or √
button.
Clearing a Marker
Marker
Music
Repeat : Off
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 64
Buttons on the Remote Control used for Audio CD(CD-DA) playback
Playing an MP3 Disc
1 Insert an MP3 Disc into the disc tray.
CD
Disc Navigation
Disc Navigation
Programme
DivX
√
Photo
√
Music
√
Setup
MOVE
OK
RETURN
EXIT
Press the …† buttons to select the Disc
2 Navigation,
and then press the OK or √
button.
CD
Disc Navigation
Disc Navigation
Programme
DivX
√
Photo
√
Music
√
Setup
Playback
MOVE
1. …†, 0~9: Selects a track (song).
2. √ : Plays the selected track (song).
3. OK button: Plays the selected track (song).
4. ( ) button: Plays the next track.
5. ( ) button: Returns to the beginning of the current
track when pressed during playback. If pressed
again, your DVD recorder moves to and plays the
previous track.
If you press the this button within three seconds after
playback starts, the previous track will be played.
If you press the this button after three seconds, the
current track will be replayed from the beginning.
6. Press the ( / ) button: Fast Play (X2, X4, X8)
7. ( ) button: Stops a track(song).
8. ( ) button: Plays a track(song) or pauses
playback.
9. ANYKEY button: To select the top menu on screen
display (Repeat or Play Option).
OK
RETURN
EXIT
Press the …† buttons to select the Music,
3 and
then press the OK or √ button.
CD
Music
Repeat : Off
Play Option : Normal
Straight from the heart
00 :22
ROOT
Bryan Adams
Bryan Adams_2
Straight from the heart
ROOT
03/06
MOVE
Run to you
Heaven
OK
RETURN
EXIT
The MP3 menu appears and the tracks(songs) are
played automatically.
the …† buttons to select the track
(song) you want to hear, then press the
4-1 Press
OK or √ button.
the number buttons to select the
4-2 Press
track (song) and the track (song) is played
automatically.
64- English
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 65
Buttons on the Remote Control used for MP3 playback
MP3 Screen Elements
CD
1
2
Music
Repeat : Off
Play Option : Normal
Straight from the heart
00 :22
7
4
ROOT
Bryan Adams
Bryan Adams_2
5
Straight from the heart
3
ROOT
03/06
MOVE
Run to you
Heaven
OK
RETURN
EXIT
6
1. Repeat mode: Repeat off, Repeat Track, Repeat
Folder or Repeat Disc
2. Current track (song): Displays the name of the
track being played.
3. Displays the current folder and play index.
4. This shows the operating state of a disc and a
playback time corresponding to a portion that is
currently played.
5. Displays the information for the folder and its tracks.
6. Button display.
7. Play Option : Normal, Random, Intro or Playlist
■
Files of one type: List of files and folders
appears in a defined order.
■
Files of multiple types: Topmost GUI
menu screen (DISC NAVIGATION)
appears.
NOTE
English -65
Playback
1. …†, 0~9: Selects a track (song).
2. √ : Plays the selected track (song).
3. OK button: Plays back the selected track (song) or
displays the files in the selected folder.
4. RETURN button: Moves to the folder to which the
current song belongs.
5. ( ) button: Plays the next track.
6. ( ) button: Returns to the beginning of the current
track when pressed while playing. If pressed again,
your DVD recorder moves to and plays the previous
track.
If you press the this button within three seconds, the
previous track will be played.
If you press the this button after three seconds, the
current track will be replayed from the beginning.
7. ( ) button: Stops a track(song).
8. ( ) button: Plays a track(song) or pauses
playback.
9. ANYKEY button: To select the top menu on screen
display (Repeat or Play Option).
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 66
Play Option Mode
To Programme Tracks
The Play Option can be used with an audio CD or MP3
in the Play or Stop mode.
1
Press the ANYKEY button during playback.
You can register a maximum of 30 tracks in the playlist.
1 Press the ANYKEY button during playback.
Repeat Mode will be highlighted.
Repeat Mode will be highlighted.
CD
Music
Repeat : Off
CD
Music
Repeat : Off
●
00 : 52
00 : 52
01/12
MOVE
01. TRACK 1
Play Option : Normal
01. TRACK 1
01. TRACK 1
4:39
02. TRACK 2
4:31
03. TRACK 3
4:30
04. TRACK 4
3:53
05. TRACK 5
4:23
06. TRACK 6
4:24
OK
RETURN
Play Option : Normal
01/12
MOVE
OK
01. TRACK 1
4:39
02. TRACK 2
4:31
03. TRACK 3
4:30
04. TRACK 4
3:53
05. TRACK 5
4:23
06. TRACK 6
4:24
RETURN
EXIT
During Stop, Play Option will be highlighted.
2 Press the œ √ buttons to select Play Option.
CD
Music
Repeat : Off
2
Press the œ √ buttons to select Play Option,
then press the …† buttons to select the
desired play option (Normal, Random, Intro
or Playlist).
CD
EXIT
Play Option : Normal
01. TRACK 1
00 : 52
the …† buttons to select Playlist and
then press the OK button.
3 Press
Music
Repeat : Off
Play Option : Normal
01. TRACK 1
00 : 52
01/12
01. TRACK 1
4:39
02. TRACK 2
4:31
03. TRACK 3
4:30
04. TRACK 4
3:53
05. TRACK 5
4:23
06. TRACK 6
4:24
the …† buttons to select Tracks in
4 Press
the order in which you want them to play
and then press OK button.
CD
Music
Repeat : Off
Play Option : Playlist
00 : 00
MOVE
OK
RETURN
EXIT
01. TRACK 1
1. P_TRACK 1
02. TRACK 2
2. P_TRACK 2
03. TRACK 3
3. P_TRACK 3
04. TRACK 4
4. P_TRACK 4
Playback
05. TRACK 5
3
●
●
●
06. TRACK 6
Press the OK button.
Normal: Tracks on a disc are played in the order in
which they were recorded on the disc.
Random: The Random option plays a disc’s tracks in
random order. After a random list is generated and
played completely, another random list is generated
and played. Random Play is continued until the play
option is changed.
Intro: The first 10 seconds of each track will be
played. If you want to listen to the music that you
MOVE
OK
RETURN
you playlisted a wrong track, press the √
5 Ifbutton,
then press the …† buttons to select
wrong track, then press the CANCEL
button.
The wrong track will be removed.
CD
Music
Repeat : Off
Play Option : Playlist
P_TRACK 1
●
have selected, press the OK or
button.
The play option will be changed to Normal Play.
When Intro Play is completed, Normal Play is
performed.
Playlist: The Playlist playback option allows you to
select the order in which you want tracks to play.
EXIT
01 : 36
01. TRACK 1
1. P_TRACK 1
02. TRACK 2
2. P_TRACK 2
03. TRACK 3
3. P_TRACK 3
04. TRACK 4
05. TRACK 5
06. TRACK 6
MOVE
OK
CANCEL
EXIT
Press the PLAY button to playback the
6 playlist.
66- English
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 67
your press the PLAY( ) button, the
5-1 IfSlide
show screen will appear.
Playing a Picture
Press the œ √ buttons to set the slide show speed,
then press the OK button.
Slide Show Speed
1
DSC01189
Insert a JPEG into the disc tray.
CD
MOVE
OK
RETURN
Disc Navigation
Disc Navigation
Programme
DivX
√
Photo
√
Music
√
Setup
MOVE
OK
RETURN
the œ √ buttons to select a picture
5-2 Press
file in Album screen, then press the OK
button.
EXIT
Press the …† buttons to select the Disc
2 Navigation,
and then press the OK or √
button.
DSC01189
CD
MOVE
Disc Navigation
Disc Navigation
Programme
DivX
√
Photo
√
Music
√
PHOTO
OK
RETURN
Setup
MOVE
OK
RETURN
EXIT
Press the …† buttons to select the Photo,
3 and
then press the OK or √ button.
the …† œ √ buttons to select a
4 Press
picture.
CD
●
Press the ANYKEY button to display or clear menus.
Photo
Index 6 /
73
Slide Show
ROOT / DSC01189
Page 2 /
MOVE
●
●
OK
13
RETURN
EXIT
To see the next 6 pictures, press the button.
To see the previous 6 pictures, press the button.
English -67
Playback
: Returns to the Album screen.
: The unit enters slide show mode.
Before the slide show can begin, the picture
interval (Slide show speed) must be set.
: Each time the OK button is pressed, the
picture rotates 90 degrees clockwise.
: Each time the OK button is pressed, the
picture is enlarged up to 4X(Four times the normal
size).
(Normal ➞ Zoom 4X ➞ Zoom 2X ➞ Zoom 4X ➞
Normal)
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 68
MPEG4 Function Description
Playing a MPEG4
Function
Skip
( or
(
MPEG4 File is used to contain the audio and video
data.
MPEG4 File with following extensions can be played.
- .AVI, .MPEG, .DIVX
Description
)
Search
or )
During play, press the
or
button, it moves
forward or backward 5 minutes.
During play, press the SEARCH (
or
) button
and press again to search at a faster speed.
(2X, 4X, 8X)
Slow Motion In pause or step mode, press the SEARCH (
button on the remote control. (1/8X, 1/4X, 1/2X)
Play
Step Motion Press the
Play
the still mode.
)
button on the remote control in
1 Insert a MPEG4 Disc into the disc tray.
CD
Disc Navigation
Disc Navigation
Programme
DivX
√
Photo
√
Music
√
■
This unit can play the following video
compression formats,
- MPEG4 Codec format : DivX 3.11 DivX 4.x
DivX 5.x DivX-Pro, XviD
- Audio format : .MP3, .MPEG, .WMA,
.LPCM, .AAC, .Ogg
■
Supported subtitle file formats: .smi, .srt,
.psb, .txt, .ass (The subtitle file should have
exactly the same name to corresponding
MPEG4 file name)
■
Some MPEG4 files created on a personal
computer may not be play back.
That is why Codec Type, Version and
Higher resolution over specification is not
supported.
NOTE
Setup
MOVE
OK
RETURN
EXIT
Press the …† buttons to select the Disc
2 Navigation,
and then press the OK or √
button.
CD
Disc Navigation
Disc Navigation
Programme
DivX
√
Photo
√
Music
√
Setup
Playback
MOVE
OK
RETURN
EXIT
Press the …† buttons to select the DivX, and
3 then
press the OK or √ button.
the …† buttons to select the avi file
4 Press
(DivX/XviD), then press the OK, √ or
button.
CD
DivX
[DivX].###.####.01.avi
MPEG4
[DivX].###.####.01.avi
MPEG4
00/01
MOVE
OK
RETURN
EXIT
MPEG4 file is played, you can use
5 When
following functions.
Pressing the STOP button once during playback will
display the file list, pressing the button again will exit the
menu screen.
68- English
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 69
the …† buttons to select Disc
2 Press
Navigation, then press the OK or √ button
twice.
Playing the Title List
The Title List screen is displayed.
DVD-RAM(VR)
Title List
No. Title
Follow these instructions to play back a scene from the
Title List.
01 19/APR/2004 1 00:00:21
√
02 19/APR/2004 1 00:00:03
√
03 20/APR/2004 2 00:00:15
√
04 20/APR/2004 2 00:00:16
√
19/APR/2004 12:00 PR12
05 21/APR/2004 1 00:06:32
√
19/APR/2004
06 21/APR/2004 1 00:08:16
√
07 22/APR/2004 1 00:09:36
√
12:00
MOVE
Using the TITLE LIST button
Length Edit
SP
OK
RETURN
EXIT
the …† buttons to select Title, then
3 Press
press the OK or √ button.
The Edit menu is displayed on the right.
1
Press the TITLE LIST button.
The Title List screen is displayed.
DVD-RAM(VR)
Title List
No. Title
DVD-RAM(VR)
Title List
No. Title
Length Edit
01 19/APR/2004 1 00:00:21
√
02 19/APR/2004 1 00:00:03
√
03 20/APR/2004 2 00:00:15
√
04 20/APR/2004 2 00:00:16
√
19/APR/2004 12:00 PR12
05 21/APR/2004 1 00:06:32
√
19/APR/2004
06 21/APR/2004 1 00:08:16
√
07 22/APR/2004 1 00:09:36
√
12:00
SP
MOVE
OK
RETURN
21/APR/2004 11:50 PR11
EXIT
the …† buttons to select an entry
2 Press
you want to play from Title List, then press
the PLAY ( ) button.
The selected entry (title) will be played back.
11:50
MOVE
SP
OK
01 19/APR/2004 1 00:00:21
√
02 19/APR/2004 1 00:00:03
√
03 20/APR/2004 2 00:00:15
Play
√
04 20/APR/2004 2 00:00:16
Rename
√
Delete
05 21/APR/2004 1 00:06:32
Edit
06 21/APR/2004 1 00:08:16
√
Protection
07 22/APR/2004 1 00:09:36
RETURN
√
√
EXIT
(Play, Rename, Delete, Edit, Protection : See
pages 72~75)
the …† buttons to select Play to play
4 Press
the title list, then press the OK button.
The selected entry (title) will be played back.
√ Play
Playback
3 To stop title play, press the STOP button.
21/APR/2004
Length Edit
To return the title list screen, press the TITLE LIST
button.
Using the MENU button
To view the current status of the disc and progress of
playback : Press the INFO button, the information
about the disc will appear.
1 Press the MENU button.
DVD-RAM(VR)
Disc Navigation
Playlist
Disc manager
Disc Navigation
Title List
√
DivX
√
Photo
√
Music
√
Programme
Setup
MOVE
OK
RETURN
DVD-RAM(VR)
Disc Name
Total Title
Total Playlist
Recordable Time
Protection
Screen
01 JAN 2005 SAT
Disc Info
15
2
02:12 SP
Not Protected
Playback
12:00
EXIT
English -69
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 70
Press the INFO button once again. Then you can
check the information about the title under playback.
Playing Info
01/JAN/2005 12:00 PR
1
Title
1/15
Created Time
01/JAN/2005 12:00
Length
00:01:43 SP
Playing Time
00:13:27
Title Protection
Not Protected
01 JAN 2005 SAT
12:00
Title List Screen Elements
DVD-RAM(VR)
Name
3 4
DVD-RAM(VR)
DVD-RAM(VR)
No. Title
5
Title List
6
Length Edit
No. Title
01 19/APR/2004 1 00:00:21 01√
1
00:00:21
√
02 19/APR/2004 1 00:00:03 02√
00:00:03
√
03 20/APR/2004 2 00:00:15 03√ Sports
00:00:15
Play
√
04 20/APR/2004 2 00:00:16 04√ Movie
00:00:16
Rename
√
Delete
00:06:32
Edit
00:08:16
√
19/APR/2004 12:00 PR12
12:00
MOVE
5 To stop title play, press the STOP button.
To return the title list screen, press the TITLE LIST
button.
■
NOTE
You can also play a recorded programme
by pressing the ANYKEY button during
playback.
DVD-RAM(VR)
Title
1/14
Time
00:01:45
Subtitle
ENG
Angle
ENG
Repeat
Off
Zoom
Off
Playback
MOVE
70- English
D 5.1CH
CHANGE
■
Press the …† buttons to select Title.
■
Press the œ √ buttons to select to play
the title list, then press the OK button.
05 21/APR/2004 1 00:06:32 05√
02/01/01
06 21/APR/2004 1 00:08:16 06√ 06
SP 00:25:30(PM)
07 22/APR/2004 1 SP
00:09:36 07√ 07
19/APR/2004
2
OK
Title List
Length Edit
MOVE RETURN
EXIT RETURN
Protection
00:09:36
√
√
EXIT
7
1. Playback screen for recorded entries.
2. Information window for the selected entry:
Title name, recording date, recording time, lock
status, recording mode
3. Recorded entry No.
4. Recorded entry title
5. Recording length (i.e., the playing time)
6. Title list edit items
Play: Plays the selected entry.
Rename: Renames the title of a selected entry.
Delete: Deletes the selected entry from the list.
Edit: Deletes a section of titles.
Protection: Locks or unlocks the selected entry.
7. Button display.
NOTE
■
This may depend on the the disc type.
■
DVD-R/DVD-RW(Video) has limited
editing function.
1-00687A-R120-UK_53~71
3/10/05
5:30 PM
Page 71
Editing
This section introduces basic functions of DVD
editing and explains both edit functions for the
recording on a disc and edit functions for the entire
disc.
Title List
A title is a section of recorded video and audio.
Title List shows a list to help you select a title.
Since the title list consists of the information on
stream that is actually recorded, if one title is deleted,
that title cannot be played again.
●
Play List
This refers to a unit of playback, which is made by
selecting a desired scene in the entire Title List.
When one playlist is played, only the scene selected
by the user will play and then stop. Since only the
information necessary for playing a desired scene is
included in a playlist, even if that playlist is deleted,
the original stream will not be deleted.
Recording or editing might not be completed if
an error, such as a sudden power failure
occurs.
Basic Editing (Title List) .....................................72
Advanced Editing (Playlist) ................................76
Please be aware that a material that has been
damaged is unable to be retrieved to its
original content.
Disc Manager .....................................................84
English -71
Editing
●
1-00687A-R120-UK_72~88
3/10/05
5:32 PM
Page 72
Basic Editing (Title List)
Press the …† œ √ buttons to select the
4 desired
characters, then press the OK
button.
DVD-RAM(VR)
Rename
Sports(A1)
A
F
K
P
U
Z
Renaming(Labeling) a Title
Follow these instructions to rename a title list entry, i.e.,
to edit the title of a recorded programme.
B
G
L
Q
V
C
H
M
R
W
D
I
N
S
X
E
J
O
T
Y
a
f
k
p
u
z
Back Space
MOVE
b c d
g h i
l m n
q r s
n w x
Space
OK
e
j
o
t
y
Delete
Clear
RETURN
Save
EXIT
Back Space: Deletes and moves the cursor
backwards by one position.
(Equivalent to the CANCEL button)
● Space: Enters a blank and moves the cursor one
forward (to the right).
● Delete: Deletes the character at the cursor position.
● Clear: Deletes all the character inputs.
● Save: Registers the character inputs.
●
Using the TITLE LIST button
1 Press the TITLE LIST button.
The Title List screen is displayed
Using the MENU button
●
●
Press the MENU button.
Press the …† buttons to select Disc Navigation,
then press the OK or √ button twice.
DVD-RAM(VR)
Title List
No. Title
Press the …† œ √ buttons to select Save,
5 then
press the OK button.
The changed title name is displayed on the title item
of the selected entry.
Length Edit
01 19/APR/2005 1 00:00:21
√
02 19/APR/2005 1 00:00:03
√
03 20/APR/2005 2 00:00:15
√
No. Title
DVD-RAM(VR)
Title List
04 20/APR/2005 2 00:00:16
√
01 19/APR/2005 1 00:00:21
√
19/APR/2005 12:00 PR12
05 21/APR/2005 1 00:06:32
√
02 19/APR/2005 1 00:00:03
√
19/APR/2005
06 21/APR/2005 1 00:08:16
√
03 20/APR/2005 2 00:00:15
√
12:00
SP
MOVE
OK
RETURN
EXIT
04 20/APR/2005 2 00:00:16
√
Sports (A1)
05 Sports(A1)
00:06:32
√
19/APR/2005
06 21/APR/2005 1 00:08:16
√
12:00
MOVE
the …† buttons to select an entry
2 Press
you want to rename from the Title List,
then press the OK or √ button.
DVD-RAM(VR)
Title List
No. Title
21/APR/2005 12:00 PR12
21/APR/2005
12:00
Editing
Length Edit
01 19/APR/2005 1 00:00:21
√
02 19/APR/2005 1 00:00:03
√
03 20/APR/2005 2 00:00:15
Play
√
04 20/APR/2005 2 00:00:16
Rename
√
Delete
05 21/APR/2005 1 00:06:32
Edit
06 21/APR/2005 1 00:08:16
√
SP
MOVE
√
Protection
OK
RETURN
EXIT
Press the …† buttons to select Rename,
3 then
press the OK button.
The Rename screen is displayed.
DVD-RAM(VR)
Rename
21/APR/2005 12:00 PR12
A
F
K
P
U
Z
B
G
L
Q
V
C
H
M
R
W
D
I
N
S
X
Back Space
MOVE
72- English
Length Edit
E
J
O
T
Y
a
f
k
p
u
z
b c d
g h i
l m n
q r s
n w x
Space
OK
e
j
o
t
y
Delete
Clear
RETURN
Save
EXIT
SP
OK
RETURN
EXIT
1-00687A-R120-UK_72~88
3/10/05
5:32 PM
Page 73
Locking(Protecting) a Title
Follow these instructions to lock an entry to protect it
from accidental deletion.
the œ √ buttons to select On, then
4 Press
press the OK button. The key icon on the
information window for the selected entry
changes to the locked status. ( ➝ )
DVD-RAM(VR)
Title List
Using the TITLE LIST button
1
Sports(A1)
Press the TITLE LIST button.
19/APR/2005
12:00
The Title List screen is displayed
MOVE
No. Title
Length Edit
01 Drama
00:00:21
√
02 Music
00:00:03
√
03 Sports
00:00:15
√
04 Movie
00:00:16
√
05 Sports(A1)
00:06:32
√
06 Edu 1
00:08:16
√
SP
OK
RETURN
EXIT
Using the MENU button
●
●
Press the MENU button.
Press the …† buttons to select Disc Navigation,
then press the OK or √ button twice.
DVD-RAM(VR)
Title List
No. Title
Drama
19/APR/2005
12:00
MOVE
Length Edit
01 Drama
00:00:21
√
02 Music
00:00:03
√
03 Sports
00:00:15
√
04 Movie
00:00:16
√
05 Sports(A1)
00:06:32
√
06 Edu 1
00:08:16
√
Deleting a Title
Follow these instructions to delete an entry from the
Title List.
SP
OK
RETURN
EXIT
Using the TITLE LIST button
2
Press the …† buttons to select an entry
you want to protect in the Title List, then
press the OK or √ button.
1 Press the TITLE LIST button.
The Title List screen is displayed
DVD-RAM(VR)
Title List
Length Edit
01 Drama
00:00:21
√
02 Music
00:00:03
√
03 Sports
00:00:15
Play
√
04 Movie
00:00:16
Rename
√
19/APR/2005 12:00 PR12
05 Sports(A1)
06 Edu 1
Delete
00:06:32
Edit
00:08:16
√
19/APR/2005
12:00
MOVE
3
No. Title
SP
OK
√
Protection
RETURN
Using the MENU button
●
●
Press the MENU button.
Press the …† buttons to select Disc Navigation,
then press the OK or √ button twice.
DVD-RAM(VR)
EXIT
Press the …† buttons to select Protection,
then press the OK or √ button.
Drama
19/APR//2005
12:00
MOVE
DVD-RAM(VR)
Title List
No. Title
Length Edit
01 Drama
00:00:21
√
02 Music
00:00:03
√
03 Sports
00:00:15
√
04 Movie
00:00:16
√
05 Sports(A1)
00:06:32
√
06 Edu 1
00:08:16
√
SP
OK
RETURN
Title List
No. Title
Length Edit
01 Drama
00:00:21
√
02 Music
00:00:03
√
03 Sports
00:00:15
Play
√
00:00:16
Rename
√
05 Sports(A1)
06 Edu 1
Delete
00:06:32
Edit
00:08:16
√
19/APR/2005
12:00
SP
the …† buttons to select an entry
2 Press
you want to delete in the Title List, then
press the OK or √ button.
√
Protection
DVD-RAM(VR)
OK
RETURN
DVD-RAM(VR)
Title List
EXIT
Title List
Title Protection:
Length Edit
01 Drama
00:00:21
√
02 Music
00:00:03
√
03 Sports
00:00:15
Play
√
04 Movie
00:00:16
Rename
√
Sports(A1)
05 Sports(A1)
√
19/APR/2005
06 Edu 1
Delete
00:06:32
Edit
00:08:16
12:00
MOVE
On
Sports(A1)
No. Title
SP
OK
√
Protection
RETURN
EXIT
Off
19/APR/2005
12:00
MOVE
SP
OK
RETURN
EXIT
English -73
Editing
04 Movie
Sports(A1)
MOVE
EXIT
1-00687A-R120-UK_72~88
3/10/05
5:32 PM
Page 74
the …† buttons to select Delete,
3 Press
then press the OK or √ button.
DVD-RAM(VR)
Follow these instructions to delete a section of a Title
List entry.
Title List
Sports(A1)
19/APR/2005
No. Title
Length Edit
01 Drama
00:00:21
√
02 Music
00:00:03
√
03 Sports
00:00:15
Play
√
04 Movie
00:00:16
Rename
√
05 Sports(A1)
Delete
00:06:32
Edit
00:08:16
√
06 Edu 1
12:00
MOVE
Deleting a Section of a Title
SP
OK
EXIT
You will be prompted with a confirmation
message.
DVD-RAM(VR), DVD-RW(VR mode):
Since Playlist is present, the message ‘Do you
want to delete?(Related Playlists may be deleted.)’
is displayed.
DVD-RAM(VR)
Using the TITLE LIST button
√
Protection
RETURN
(VR mode)
1 Press the TITLE LIST button.
The Title List screen is displayed
Using the MENU button
●
●
Press the MENU button.
Press the …† buttons to select Disc Navigation,
then press the OK or √ button twice.
DVD-RAM(VR)
Title List
No. Title
Length Edit
01 Drama
00:00:21
√
02 Music
00:00:03
√
03 Sports
00:00:15
√
04 Movie
00:00:16
√
Drama
05 Sports(A1)
00:06:32
√
19/APR/2005
06 Edu 1
00:08:16
√
Title List
Do you want to delete?
(Related playlists
may be deleted.)
12:00
Sports(A1)
Yes
19/APR/2005
MOVE
12:00
MOVE
4
OK
RETURN
OK
RETURN
EXIT
The message may depend on the type of disc.
Press the œ √ buttons to select Yes, then
press the OK button.
the …† buttons to select an entry
2 Press
you want to edit from the Title List, then
press the OK or √ button.
DVD-RAM(VR)
Title List
Sports(A1)
19/APR/2005
MOVE
■
■
Editing
■
■
You cannot delete a protected entry.
If you want to delete a protected entry,
select “Off” in the Title Protection menu.
(See page 73)
When the Disc Protection has been set to
Protected, you cannot delete titles.
(See page 85)
74- English
Length Edit
01 Drama
00:00:21
√
02 Music
00:00:03
√
03 Sports
00:00:15
Play
√
04 Movie
00:00:16
Rename
√
05 Sports(A1)
Delete
00:06:32
Edit
00:08:16
√
SP
OK
With DVD-R, titles are only deleted from
the menu however, the Title remains
physically on the disc.
EXIT
the …† buttons to select Edit, then
3 Press
press the OK or √ button.
The Edit Title List screen is display
DVD-RAM(VR)
Edit Title List
Title List No. 05
Once an entry is deleted from the Title
List it cannot be recovered.
Once DVD-R, DVD-RW is finalised, it
cannot be deleted.
√
Protection
RETURN
Start
Start
00:00:00
00:00:00
End
Delete
Sports(A1)
21/APR/2005 11:50
■
No. Title
06 Edu 1
12:00
NOTE
EXIT
SP
DVD-RW(Video mode), DVD-R: Since Playlist is
not present, the message ‘Do you want to delete?’
is displayed.
●
SP
No
MOVE
OK
End
00:00:00
RETURN
Return
EXIT
1-00687A-R120-UK_72~88
3/10/05
5:32 PM
Page 75
4 Press the OK button at the starting point.
The image and starting point time are displayed in the
section deletion starting point window.
6 Press the OK button to select the Delete.
DVD-RAM(VR)
Edit Title List
Title List No. 05
DVD-RAM(VR)
Start
Edit Title List
Title List No. 05
Start
Start
End
00:00:06
00:10:15
Delete
Sports(A1)
Start
End
00:00:06
00:00:06
21/APR/2005 11:50
MOVE
Delete
OK
End
00:10:15
RETURN
Return
EXIT
Sports(A1)
21/APR/2005 11:50
MOVE
OK
End
00:00:00
RETURN
Return
EXIT
DVD-RAM(VR)
Edit Title List
Title List No. 05
Start
Do you want to delete?
Edit Title List Screen Elements
Start
00:00:06
(Deleted part will not
be restored.)
00:10:15
Yes
End
Delete
No
Sports(A1)
21/APR/2005 11:50
DVD-RAM(VR)
MOVE
Edit Title List
OK
End
00:10:10
RETURN
Return
EXIT
Title List No. 05
Start
Start
1
End
00:00:06
00:00:06
3
Delete
Sports(A1)
2
21/APR/2005 11:50
MOVE
OK
End
00:00:00
RETURN
Return
Press œ √ buttons to select Yes, then press
7 the
OK button.
The selected section has been deleted.
To return to the Title List screen, press the …†
buttons to select Return.
4
EXIT
1. Playback bar
2. Playtime
3. Section deletion starting point window and time
4. Section deletion end point window and time
● Select the start and end points of the section you
want to delete using the playback related buttons.
● Playback related buttons: (
,
).
,
■
The length of the section to be deleted
must be at least 5 seconds long.
■
If the length of the section to be deleted is
less than 5 seconds, you will be prompted
with the message 'The range is too
short.'.
■
If the end time precedes the starting
point, you will be prompted with the
message ‘End point cannot be marked
earlier than start point’.
■
The section cannot be deleted when it
includes a still picture.
■
Press the MENU button after the
operation has finished. The Edit Title List
screen will disappear.
NOTE
5 Press the OK button at the end point.
The image and end point time are displayed in the
Section deletion ending point window.
DVD-RAM(VR)
Edit Title List
Title List No. 05
Start
Start
00:00:06
00:10:15
End
Delete
Sports(A1)
21/APR/2005 11:50
MOVE
OK
End
00:10:15
RETURN
Return
EXIT
Editing
English -75
1-00687A-R120-UK_72~88
3/10/05
5:32 PM
Page 76
5 Press the OK button at the end point.
Advanced Editing
(Playlist)
DVD-RAM(VR)
Make Scene
Scene No. 001
Start
Start
Title List: 1/6
00:10:00
Creating a Playlist
19/APR/04 12:00
MOVE
(VR mode)
●
With the unit in Stop mode, press the
MENU button.
Press the …† buttons to select Playlist, then
2 press
the OK or √ button.
DVD-RAM(VR)
Playlist
Disc Navigation
New Playlist
√
Playlist
Edit Playlist
√
●
Programme
The Make Scene screen is displayed.
DVD-RAM(VR)
Make Scene
Scene No. 001
Return
EXIT
A new Scene will be added to the current Playlist.
A new Make Scene screen is displayed.
EXIT
the …† buttons to select New
3 Press
Playlist, then press the OK or √ button.
00:10:00
RETURN
The image and end point time are displayed in the
End window.
The yellow-coloured selection bar moves to the
Make item.
■
You can check and see all the scenes on
Edit Playlist screen.
■
Repeat steps 1~6 if you want to make a
new playlist.
■
Repeat steps 3~6 if you want to make
scenes of the playlist.
NOTE
RETURN
End
6 Press the OK button to select the Make.
Setup
OK
OK
- To make a new playlist -
Disc manager
MOVE
End
Make
New Playlist
Follow these instructions to create a new playlist entry
from a recorded title.
1
00:00:10
- To return to Edit Playlist menu -
the …† buttons to select Return,
7 Press
then press the OK button.
The Edit Playlist screen is displayed.
Start
Start
Title List: 1/6
End
00:00:00
DVD-RAM(VR)
00:00:10
Edit Playlist
Make
No. Title
New Playlist
19/APR/04 12:00
MOVE
End
OK
00:00:00
RETURN
Return
EXIT
25/APR/2005 06:03
Length Edit
01 23/APR/2005/0 00:00:21
√
02 23/APR/2005/0 00:00:03
√
03 24/APR/2005/1 00:00:15
√
04 24/APR/2005/1 00:00:16
√
05 25/APR/2005/2 00:06:32
√
7 Scenes
24/APR/2005 10:43
4 Press the OK button at the start point.
DVD-RAM(VR)
OK
RETURN
EXIT
Make Scene
Scene No. 001
Start
Editing
MOVE
Start
Title List: 1/6
00:00:10
00:00:10
End
the MENU or PLAY LIST button after
8 Press
the operation has finished.
The Edit Playlist screen will disappear.
Make
New Playlist
19/APR/04 12:00
MOVE
OK
End
00:00:00
RETURN
Return
EXIT
NOTE
●
●
●
The image and time at the start point are
displayed on the Start window.
The yellow-coloured selection bar moves to the
End item.
Select the starting point of the section from
which you want to create a new scene using the
playback related buttons ( ,
,
).
76- English
■
You can create up to 99 playlist entries.
■
Depending on the kind of disc, the
displayed screen may have a slight
difference.
1-00687A-R120-UK_72~88
3/10/05
5:32 PM
Page 77
Playing Entries in the Playlist
Follow these instructions to play the playlist entries.
the …† buttons to select Play, then
3 Press
select the OK button.
The playlist entries will be played.
DVD-RAM(VR)
Edit Playlist
(VR mode)
1
No. Title
With the unit in Stop mode, press the
PLAY LIST button.
24/APR/2005 10:43
√
03 24/APR/2005/1 00:00:15
Play
√
04 24/APR/2005/1 00:00:16
Rename
√
24/APR/2005 10:43
MOVE
DVD-RAM(VR)
√
02 23/APR/2005/0 00:00:03
Edit Scene √
05 25/APR/2005/2 00:06:32
Copy
7 Scenes
The Edit Playlist screen is displayed.
Length Edit
01 23/APR/2005/0 00:00:21
Delete
OK
RETURN
EXIT
Edit Playlist
No. Title
24/APR/2005 10:43
Length Edit
01 23/APR/2005/0 00:00:21
√
02 23/APR/2005/0 00:00:03
√
03 24/APR/2005/1 00:00:15
√
04 24/APR/2005/1 00:00:16
√
05 25/APR/2005/2 00:06:32
√
√ Play
7 Scenes
24/APR/2005 10:43
MOVE
OK
RETURN
EXIT
Using the MENU button
●
●
●
With the unit in Stop mode, press the MENU
button.
Press the …† buttons to select Playlist, then
press the OK or √ button.
Press the …† buttons to select Edit Playlist,
then press the OK or √ button.
DVD-RAM(VR)
●
DVD-RAM(VR)
Disc Name
Total Title
Total Playlist
Recordable Time
Protection
Screen
01 JAN 2005 SAT
Playlist
Disc Navigation
New Playlist
√
Playlist
Edit Playlist
√
To view the current status of the disc and progress
of playback : Press the INFO button, and the
information about the disc will appear.
Disc Info
15
2
02:12 SP
Not Protected
Playback [Playlist]
13:00
Disc manager
Programme
●
Setup
MOVE
OK
RETURN
EXIT
the …† buttons to select the title you
2 Press
want to edit from the Playlist, then press the
OK or √ button.
The Edit Playlist menu is displayed : Play, Rename,
Edit Screen, Copy, Delete.
●
Press the INFO button once again. Then you can
check the information about the playlist currently
playing back.
DVD-RAM(VR)
Name
Playing Info
01/JAN/2005 12:00
Playlist
Created Time
Length
Playing Time
Total Scene
01 JAN 2005 SAT
1/15
01/JAN/2005 12:00
00:01:43
00:13:27
1
13:00
The screen returns to the Edit Playlist screen when
the playback has finished.
The screen returns to the Edit Playlist screen.
English -77
Editing
4 Press the STOP button to stop playing.
1-00687A-R120-UK_72~88
3/10/05
5:32 PM
Page 78
Renaming a Playlist Entry
Follow these instructions to rename a playlist entry, i.e.
to edit the title of a playlist entry.
the desired characters using the …†
4 Enter
œ √ buttons.
DVD-RAM(VR)
Rename
Dolphin
(VR mode)
A
F
K
P
U
Z
the unit in Stop mode, press the
1 With
PLAY LIST button.
24/APR/2005 10:43
D
I
N
S
X
E
J
O
T
Y
MOVE
Edit Playlist
No. Title
C
H
M
R
W
●
Length Edit
01 23/APR/2005/0 00:00:21
√
02 23/APR/2005/0 00:00:03
√
03 24/APR/2005/1 00:00:15
√
04 24/APR/2005/1 00:00:16
√
05 25/APR/2005/2 00:06:32
√
a
f
k
p
u
z
Back Space
The Edit Playlist screen is displayed.
DVD-RAM(VR)
B
G
L
Q
V
●
b c d
g h i
l m n
q r s
n w x
Space
OK
e
j
o
t
y
Delete
Clear
RETURN
Save
EXIT
This function is the same as the Rename
function in renaming the title list. (See page 72.)
The maximum number of characters that can be
entered is 31. All 31 characters can be
displayed by pressing the INFO. button twice.
7 Scenes
24/APR/2005 10:43
MOVE
OK
RETURN
EXIT
the …† œ √ buttons to select Save,
5 Press
then press the OK button.
Using the MENU button
●
●
●
With the unit in Stop mode, press the MENU
button.
Press the …† buttons to select Playlist, then
press the OK or √ button.
Press the …† buttons to select Edit Playlist,
then press the OK or √ button.
The changed title is displayed in the title field of the
selected playlist entry.
DVD-RAM(VR)
Edit Playlist
No. Title
Dolphin
Length Edit
01 23/APR/2005/0 00:00:21
√
02 23/APR/2005/0 00:00:03
√
03 Dolphin
00:00:15
√
04 24/APR/2005/1 00:00:16
√
05 25/APR/2005/2 00:06:32
√
7 Scenes
the …† buttons to select the title you
2 Press
want to edit from the Playlist, then press the
OK or √ button.
The Edit Playlist menu is displayed :Play, Rename,
Edit Scene, Copy, Delete
DVD-RAM(VR)
Edit Playlist
No. Title
24/APR/2005 10:43
7 Scenes
Length Edit
01 23/APR/2005/0 00:00:21
√
02 23/APR/2005/0 00:00:03
√
03 24/APR/2005/1 00:00:15
Play
√
04 24/APR/2005/1 00:00:16
Rename
√
Edit Scene √
05 25/APR/2005/2 00:06:32
Copy
24/APR/2005 10:43
Editing
MOVE
OK
Delete
RETURN
EXIT
Press the …† buttons to select Rename, then
3 press
the OK button.
The Rename screen is displayed.
DVD-RAM(VR)
Edit Playlist
No. Title
24/APR/2005 10:43
7 Scenes
√
02 23/APR/2005/0 00:00:03
√
03 24/APR/2005/1 00:00:15
Play
√
04 24/APR/2005/1 00:00:16
Rename
√
Edit Scene √
05 25/APR/2005/2 00:06:32
Copy
24/APR/2005 10:43
MOVE
78- English
OK
Length Edit
01 23/APR/2005/0 00:00:21
Delete
RETURN
EXIT
24/APR/2005 10:43
MOVE
OK
RETURN
EXIT
1-00687A-R120-UK_72~88
3/10/05
5:32 PM
Page 79
Editing a Scene for the Playlist
Playing a Selected Scene
Follow these instructions to edit scenes for a playlist.
(VR mode)
1
With the unit in Stop mode, press the
PLAY LIST button.
the …† œ √ buttons to select the
4 Press
scene you want to play, then press the OK
button.
The playlist entry to be played is selected.
The Edit Playlist screen is displayed.
DVD-RAM(VR)
Scene No.
DVD-RAM(VR)
Length Edit
01 Science
00:00:17
√
02 Sky
00:00:06
√
03 Dolphin
00:00:06
√
04 Natural
00:00:37
√
Play
Modify
OK
RETURN
2
With the unit in Stop mode, press the MENU
button.
Press the …† buttons to select Playlist, then
press the OK or √ button.
Press the …† buttons to select Edit Playlist,
then press the OK or √ button.
00:00:07
03
00:00:04
04
00:00:03
05
00:00:11
06
00:00:04
OK
RETURN
Delete
EXIT
The selected scene is played.
DVD-RAM(VR)
Scene No.
Edit Scene
2/7
Playlist No. 3
Play
Modify
01
00:00:26
02
00:00:07
03
00:00:04
04
00:00:03
05
00:00:11
06
00:00:04
Move
Add
MOVE
The Edit Playlist menu is displayed.:Play, Rename,
Edit Scene, Copy, Delete
DVD-RAM(VR)
Move
5 Press the OK button.
Press the …† buttons to select the title you
want to edit from the Playlist, then press the
OK or √ button.
OK
RETURN
Delete
EXIT
√ Play
Edit Playlist
No. Title
Length Edit
01 Science
00:00:17
√
02 Sky
00:00:06
√
03 Dolphin
00:00:06
Play
√
04 Natural
00:00:37
Rename
√
Dolphin
Edit Scene
7 Scenes
Copy
24/APR/2005 10:43
MOVE
02
EXIT
Using the MENU button
●
00:00:26
MOVE
24/APR/2005 10:43
●
01
Add
7 Scenes
●
Playlist No. 3
Edit Playlist
No. Title
Science
MOVE
Edit Scene
2/7
Delete
OK
RETURN
EXIT
●
To stop scene play, press the STOP button.
Press the …† buttons to select Edit
3 Scene,
then press the OK button.
The Edit Scene screen is displayed.
DVD-RAM(VR)
Edit Playlist
Length Edit
01 Science
00:00:17
√
02 Sky
00:00:06
√
03 Dolphin
00:00:06
Play
√
04 Natural
00:00:37
Rename
√
Dolphin
Edit Scene
7 Scenes
Copy
24/APR/2005 10:43
MOVE
Delete
OK
RETURN
DVD-RAM(VR)
Scene No.
Editing
No. Title
EXIT
Edit Scene
1/7
Playlist No. 3
Play
Modify
01
00:00:26
02
00:00:07
03
00:00:04
04
00:00:03
05
00:00:11
06
00:00:04
Move
Add
MOVE
OK
RETURN
Delete
EXIT
English -79
1-00687A-R120-UK_72~88
3/10/05
5:33 PM
Page 80
Modifying a Scene (Replacing a Scene)
the OK button at the end point of the
7 Press
scene.
To setup, follow steps 1 to 3 in page 79.
DVD-RAM(VR)
Modify Scene
Scene No. 002
Start
4
Press the …† œ √ buttons to select the
scene you want to modify, then press the
OK button.
Start
23/APR/2005 03:34:00
Scene No.
End
Change
Natural
MOVE
DVD-RAM(VR)
00:00:25
00:00:30
OK
End
00:00:30
RETURN
Cancel
EXIT
Edit Scene
2/7
Playlist No. 3
Play
●
Modify
01
00:00:26
02
00:00:07
03
00:00:04
04
00:00:03
05
00:00:11
06
00:00:04
The image and ending point time are displayed in
the End window.
Move
Add
MOVE
OK
RETURN
Delete
EXIT
Press the …† buttons to select Change, then
8 press
the OK button.
DVD-RAM(VR)
Scene No.
5
Press the …† buttons to select Modify,
then press the OK button.
Edit Scene
2/7
Playlist No. 3
Play
Modify
The Modify Scene screen is displayed.
01
00:00:26
02
00:00:07
03
00:00:04
04
00:00:03
05
00:00:11
06
00:00:04
Move
Add
DVD-RAM(VR)
Delete
Modify Scene
MOVE
OK
RETURN
EXIT
Scene No. 002
Start
Start
End
00:00:00
00:00:00
Change
Natural
23/APR/2005 03:34:00
MOVE
OK
End
00:00:00
RETURN
Cancel
EXIT
the OK button at the start point of the
6 Press
scene.
DVD-RAM(VR)
Modify Scene
Scene No. 002
Start
Start
00:00:25
00:00:25
End
Change
Natural
23/APR/2005 03:34:00
MOVE
Editing
●
●
OK
End
00:00:00
RETURN
Cancel
EXIT
The image and starting point time are displayed
on the Start window.
Select the starting or ending point of the section
you want to modify using the playback related
buttons ( ,
,
).
80- English
●
The scene you want to modify is changed with the
selected section.
1-00687A-R120-UK_72~88
3/10/05
5:33 PM
Page 81
Moving a Scene (Changing the Position of a Scene)
■
You cannot move the selected scene to the
position of the next scene, because the
selected scene should be inserted before
that position, which requires no action.
■
Depending on the kind of disc, the displayed
screen may have a slight difference.
NOTE
To setup, follow steps 1 to 3 in page 79.
4
Press the …† œ √ buttons to select the
scene you want to move (change the
position), then press the OK button.
Adding a Scene
DVD-RAM(VR)
Scene No.
Edit Scene
3/7
Playlist No. 3
Play
Modify
01
00:00:26
02
00:00:07
03
00:00:04
Move
Add
04
00:00:03
05
MOVE
00:00:11
OK
06
00:00:04
RETURN
Delete
EXIT
To setup, follow steps 1 to 3 in page 79.
the …† œ √ buttons to select the
4 Press
scene that will have a new scene inserted
before it, then press the OK button.
A yellow selection window is displayed on the scene
to be added as the new scene.
the …† buttons to select Move, then
5 Press
press the OK button.
DVD-RAM(VR)
Scene No.
Edit Scene
4/7
Playlist No. 3
Play
Modify
DVD-RAM(VR)
Scene No.
01
00:00:26
02
00:00:07
03
00:00:04
04
00:00:00
05
00:00:11
06
00:00:04
Move
Edit Scene
3/7
Playlist No. 3
Add
Play
Delete
Modify
01
00:00:26
02
00:00:07
03
00:00:04
04
00:00:03
05
00:00:11
06
00:00:04
MOVE
OK
RETURN
EXIT
Move
Add
MOVE
●
OK
RETURN
Delete
EXIT
the …† buttons to select Add, then
5 Press
press the OK button.
A yellow selection window is displayed on the
scene to be moved.
DVD-RAM(VR)
Add Scene
Scene No. 004
6
Start
Press the …† œ √ buttons to select the
position to which you want to move the
selected scene, then select the OK button.
Start
APR/23/2005 06:43 AM
Scene No.
Add
Sclence
MOVE
DVD-RAM(VR)
End
00:00:00
00:00:15
OK
End
Cancel
00:00:00
RETURN
EXIT
Edit Scene
6/7
Playlist No. 3
Play
Modify
01
00:00:26
02
00:00:07
03
00:00:04
04
00:00:03
05
00:00:11
06
00:00:04
Move
Add
MOVE
OK
RETURN
the OK button at the starting point of
6 Press
the scene.
Delete
DVD-RAM(VR)
EXIT
Add Scene
Editing
Scene No. 004
Start
●
The selected scene is moved to the selected
position.
Start
00:00:15
00:00:15
End
Add
Sclence
APR/23/2005 06:43 AM
DVD-RAM(VR)
Scene No.
MOVE
Edit Scene
5/7
OK
End
00:00:00
RETURN
Cancel
EXIT
Playlist No. 3
Play
Modify
01
00:00:26
02
00:00:07
03
00:00:04
04
00:00:03
05
00:00:11
06
00:00:04
Add
MOVE
OK
RETURN
●
Move
Delete
EXIT
●
The image and starting point time are displayed in
the Start window.
Select the end point of the section where you want
to add the new scene using the playback related
buttons ( ,
,
).
English -81
1-00687A-R120-UK_72~88
3/10/05
5:33 PM
Page 82
the OK button at the end point of the
7 Press
scene.
DVD-RAM(VR)
Copying a Playlist Entry to the
Playlist
Add Scene
Scene No. 004
Start
Start
00:00:15
00:00:35
Using the PLAY LIST button
End
Add
Sclence
APR/23/2005 06:43 AM
MOVE
OK
End
00:00:35
RETURN
Cancel
EXIT
the unit in Stop mode, press the
1 With
PLAY LIST button.
The Edit Playlist screen is displayed.
●
●
The image and time of the end point are displayed
in the End window.
To cancel, press the …† buttons to select cancel,
then press the OK button.
DVD-RAM(VR)
Edit Playlist
No. Title
Length Edit
01 Science
00:00:17
√
02 Sky
00:00:06
√
03 Dolphin
00:00:06
√
04 Natural
00:00:37
√
Science
the …† buttons to select Add, then
8 Press
press the OK button.
DVD-RAM(VR)
Scene No.
7 Scene
APR/23/2005 06:43 AM
MOVE
Playlist No. 3
●
02
00:00:07
03
00:00:04
Move
●
Add
04
00:00:15
MOVE
●
05
00:00:11
OK
06
00:00:04
RETURN
Delete
EXIT
The section you want to add is inserted prior to the
scene selected in step 4.
●
With the unit in Stop mode, press the MENU
button.
Press the …† buttons to select Playlist, then press
the OK or √ button.
Press the …† buttons to select Edit Playlist, then
press the OK or √ button.
the …† buttons to select the title you
2 Press
want to copy to the Playlist, then press the
OK or √ button.
The Edit Playlist menu is displayed.:Play, Rename,
Edit Scene, Copy, Delete
Deleting a Scene
DVD-RAM(VR)
Edit Playlist
To setup, follow steps 1 to 3 in page 79.
4
Press the …† œ √ buttons to select the
scene you want to delete, then press the
OK button.
No. Title
Length Edit
01 Science
00:00:17
√
02 Sky
00:00:06
√
03 Dolphin
00:00:06
Play
√
04 Natural
00:00:37
Rename
√
Dolphin
Edit Scene
7 Scene
Copy
APR/23/2005 06:43 AM
DVD-RAM(VR)
Scene No.
EXIT
Using the MENU button
Modify
00:00:26
RETURN
Edit Scene
4/8
Play
01
OK
Edit Scene
2/6
MOVE
OK
Delete
RETURN
EXIT
Playlist No. 3
Play
Modify
01
00:00:26
02
00:00:07
03
00:00:04
04
00:00:03
05
00:00:11
06
00:00:04
Move
Add
Editing
MOVE
5
OK
RETURN
the …† buttons to select Copy, then
3 Press
press the OK button.
Playlist that has been selected will be copied.
Delete
EXIT
Press the …† buttons to select Delete,
then press the OK button.
DVD-RAM(VR)
Edit Playlist
No. Title
Length Edit
01 Science
00:00:17
√
02 Sky
00:00:06
√
03 Dolphin
00:00:06
Play
√
04 Natural
00:00:37
Rename
√
Dolphin
Edit Scene
7 Scene
Copy
APR/23/2005 06:43 AM
DVD-RAM(VR)
MOVE
Scene No.
Delete
Edit Scene
2/6
OK
RETURN
EXIT
Playlist No. 3
Play
Modify
01
00:00:26
02
00:00:07
03
00:00:04
DVD-RAM(VR)
Edit Playlist
Move
Add
04
00:00:00
MOVE
04
05
OK
00:00:00
00:00:11
06
00:00:00
RETURN
Delete
EXIT
Dolphin
No. Title
Length Edit
01 Science
00:00:17
√
02 Sky
00:00:06
√
03 Dolphin
00:00:06
√
04 Natural
00:00:37
√
05 Dolphin
00:00:06
√
7 Scene
APR/23/2005 06:43 AM
MOVE
82- English
OK
RETURN
EXIT
1-00687A-R120-UK_72~88
3/10/05
5:33 PM
Page 83
■
You can create up to 999 scenes on one
disc. In some cases, this may be different
from the actual numbers.
■
Press the MENU button after the
operation has finished. The Edit Playlist
screen will disappear.
NOTE
the …† buttons to select Delete,
3 Press
then press the OK button.
DVD-RAM(VR)
Edit Playlist
Dolphin
No. Title
Length Edit
01 Science
00:00:17
√
02 Sky
00:00:06
√
03 Dolphin
00:00:06
Play
√
04 Natural
00:00:37
Rename
√
05 Dolphin
Edit Scene √
00:00:06
Copy
7 Scene
APR/23/2005 06:43 AM
MOVE
Deleting a Playlist Entry from
the Playlist
Using the PLAYLIST button
1
With the unit in Stop mode, press the
PLAY LIST button.
The Edit Playlist screen is displayed.
●
OK
Delete
RETURN
EXIT
You will be prompted with the delete confirmation
message 'Do you want to delete?'.
DVD-RAM(VR)
Edit Playlist
Do you want to delete?
Yes
Dolphin
No
7 Scene
APR/23/2005 06:43 AM
DVD-RAM(VR)
Edit Playlist
Science
No. Title
Length Edit
01 Science
00:00:17
√
02 Sky
00:00:06
√
03 Dolphin
00:00:06
√
04 Natural
00:00:37
√
05 Dolphin
00:00:06
√
7 Scene
OK
RETURN
EXIT
Using the MENU button
●
●
●
OK
RETURN
EXIT
the œ √ buttons to select Yes, then
4 Press
press the OK button.
It automatically returned to the Edit Playlist screen
after the delete operation has finished.
APR/23/2005 06:43 AM
MOVE
MOVE
With the unit in Stop mode, press the MENU
button.
Press the …† buttons to select Playlist, then
press the OK or √ button.
Press the …† buttons to select Edit Playlist, then
press the OK or √ button.
DVD-RAM(VR)
Deleting...
(Please wait)
Dolphin
7 Scene
APR/23/2005 06:43 AM
MOVE
the …† buttons to select the title you
2 Press
want to delete from the Playlist, then press
the OK or √ button.
Edit Playlist
OK
RETURN
DVD-RAM(VR)
EXIT
Edit Playlist
The Edit Playlist menu is displayed.:Play, Rename,
Edit Scene, Copy, Delete
No. Title
Length Edit
01 Science
00:00:17
√
02 Sky
00:00:06
√
03 Dolphin
00:00:06
√
04 Natural
00:00:37
√
Natural
DVD-RAM(VR)
Edit Playlist
7 Scene
Dolphin
Length Edit
01 Science
00:00:17
√
02 Sky
00:00:06
√
03 Dolphin
00:00:06
Play
√
04 Natural
00:00:37
Rename
√
05 Dolphin
Edit Scene √
00:00:06
Copy
7 Scene
APR/23/2005 06:43 AM
MOVE
OK
MOVE
OK
RETURN
Editing
APR/23/2005 06:43 AM
No. Title
EXIT
Delete
RETURN
EXIT
English -83
1-00687A-R120-UK_72~88
3/10/05
5:33 PM
Page 84
the desired characters press the …†
4 Enter
œ √ buttons.
Disc Manager
DVD-RAM(VR)
Rename
Disc
A
F
K
P
U
Z
Editing the Disc Name
Follow these instructions to give a name to a disc.
B
G
L
Q
V
C
H
M
R
W
D
I
N
S
X
E
J
O
T
Y
a
f
k
p
u
z
Back Space
Space
MOVE
●
the unit in Stop mode, press the
1 With
MENU button.
DVD-RAM(VR)
Disc Navigation
Playlist
Disc manager
●
b c d
g h i
l m n
q r s
n w x
e
j
o
t
y
Delete
OK
Clear
RETURN
Save
EXIT
This function is the same as the Rename
function in renaming the title list. (See page 72.)
The maximum number of characters that can be
entered is 31. All 31 characters can be
displayed by pressing the INFO. button.
Disc Navigation
Title List
√
DivX
√
Photo
√
Music
√
the …† œ √ buttons to select Save,
5 Press
then press the OK button.
A disc name is given to the disc.
Programme
Setup
MOVE
OK
RETURN
DVD-RAM(VR)
EXIT
Title List
Playlist
Disc manager
2
Playlist
Disc manager
:
√
Disc Protection
: Not Protected
√
Disc Format
√
Delete All Title Lists
√
Programme
OK
RETURN
EXIT
the …† buttons to select Disc
3 Press
Name, then press the OK or √ button.
The Edit Name screen is displayed.
DVD-RAM(VR)
Editing
B
G
L
Q
V
C
H
M
R
W
D
I
N
S
X
Back Space
MOVE
84- English
E
J
O
T
Y
√
Disc Format
√
Delete All Title Lists
√
OK
RETURN
EXIT
■
You may need to clear disc protect before
beginning editing.
■
Depending on the kind of disc, the
displayed screen may be different.
NOTE
Setup
A
F
K
P
U
Z
: Not Protected
Disc Manager
Disc Name
MOVE
√
Disc Protection
Setup
MOVE
Disc Navigation
: Disc
Programme
Press the …† buttons to select Disc
Manager, then press the OK or √ button.
DVD-RAM(VR)
Disc Manager
Disc Name
Rename
a
f
k
p
u
z
b c d
g h i
l m n
q r s
n w x
Space
OK
e
j
o
t
y
Delete
Clear
RETURN
Save
EXIT
1-00687A-R120-UK_72~88
3/10/05
5:33 PM
Page 85
Disc Protection
Formatting a Disc
Disc Protection allows you to protect your discs from
being formatted or deleted due to unintended
operations.
1
With the unit in Stop mode, press the
MENU button.
Use these instructions to format a disc.
The disc protect should also be cleared.
the unit in Stop mode, press the
1 With
MENU button.
DVD-RAM(VR)
DVD-RAM(VR)
Disc Navigation
Playlist
Disc manager
Disc Navigation
Title List
√
DivX
√
Photo
√
Music
√
Disc Navigation
Playlist
Disc manager
Disc Navigation
Title List
√
DivX
√
Photo
√
Music
√
Programme
Setup
Programme
Setup
MOVE
MOVE
OK
RETURN
the …† buttons to select Disc
2 Press
Manager, then press the OK or √ button.
DVD-RAM(VR)
Playlist
Disc Navigation
Playlist
Disc manager
RETURN
EXIT
the …† buttons to select Disc
2 Press
Manager, then press the OK or √ button.
Disc Navigation
DVD-RAM(VR)
OK
EXIT
Disc Manager
Disc Name
:
√
Disc Protection
: Not Protected
√
Disc manager
Disc Manager
Disc Name
:
√
Disc Protection
: Not Protected
√
Disc Format
√
Delete All Title Lists
√
Programme
Setup
Disc Format
√
Delete All Title Lists
√
Programme
MOVE
OK
RETURN
EXIT
Setup
MOVE
OK
RETURN
EXIT
the …† buttons to select Disc
3 Press
Format, then press the OK or √ button.
the …† buttons to select Disc
3 Press
Protection, then press the OK or √ button.
DVD-RAM(VR)
Disc Navigation
DVD-RAM(VR)
Disc Navigation
Playlist
Disc Manager
Disc Name
:
√
Disc Protection
: Not
NotProtected
Protected
√
Portected
Disc Format
Disc manager
Delete All Title Lists
Playlist
Disc manager
Disc Manager
Disc Name
:
√
Disc Protection
: Not Protected
√
Disc Format
√
Delete All Title Lists
√
Programme
√
Setup
√
Programme
Setup
MOVE
MOVE
OK
RETURN
OK
RETURN
EXIT
DVD-RAM
● You will be prompted with the confirmation
message 'Do you want to format disc?'.
DVD-RAM(VR)
Disc Navigation
Playlist
Disc manager
Disc Manager
Disc Name
:
√
Disc Protection
: Portected
√
Disc Format
√
Delete All Title Lists
√
Disc Navigation
Playlist
Disc manager
Editing
the …† button to select Protected,
4 Press
then Press the OK button.
DVD-RAM(VR)
EXIT
Disc Manager
Disc Name
:
√
Disc Protection
: Not Protected
√
Do you
want to format disc?
Disc
Format
√
Delete All Title Lists
√
Programme
Yes
No
Setup
Programme
Setup
MOVE
MOVE
OK
RETURN
OK
RETURN
EXIT
EXIT
●
You will be prompted with the confirmation
message 'All data will be deleted. Do you
want to continue?'.
English -85
1-00687A-R120-UK_72~88
3/10/05
5:33 PM
Page 86
DVD-RW
● You will be prompted with the confirmation
message ‘Choose the recording format for
DVD- RW.’
the …† buttons to select Disc
2 Press
Manager, then press the OK or √ button.
DVD-RAM(VR)
Disc Navigation
DVD-RW(VR)
Disc Manager
Playlist
Disc Navigation
Disc Name
√
Disc manager
: Not Protected
√
Disc Format
: DVD-VR
Disc manager
Choose
theFinalise
recording format for DVD-RW.
Disc
√
Programme
√
Setup
Playlist
Programme
Disc Protection
:
Delete All Title Lists
DVD-VR
DVD-V
:
√
Disc Protection
: Not Protected
√
Disc Format
√
Delete All Title Lists
√
√
Setup
MOVE
MOVE
OK
RETURN
Disc Manager
Disc Name
OK
RETURN
EXIT
EXIT
the œ √ buttons to select Yes, then
4 Press
press the OK button.
The disc is formatted.
Press the …† button to select Delete All
3 Title
Lists, then press the OK or √ button.
DVD-RAM(VR)
Disc Navigation
Playlist
Disc manager
DVD-VR and DVD-V are defined according to
their recording format.
Disc Manager
Disc Name
:
√
Disc Protection
: Not Protected
√
Disc Format
√
Delete All Title Lists
√
Programme
Setup
DVD-VR
DVD-RAM
DVD-RW
DISC
DVD-V
DVD-RW
DVD-R
MOVE
●
OK
RETURN
EXIT
You will be prompted with the confirmation
message ‘Do you want to delete all title lists?'.
DVD-RAM(VR)
Disc Navigation
Playlist
Disc Manager
Disc Name
:
√
Disc Protection
: Not Protected
√
Disc Format
Disc manager Do you want to delete all title lists?
Delete All Title Lists
Programme
Delete All Title Lists
●
the unit in Stop mode, press the
1 With
MENU button.
DVD-RAM(VR)
Playlist
Disc manager
√
DivX
√
Photo
√
Music
√
Editing
RETURN
EXIT
When Protected Entry exists: The Delete All Title
List function will not operate. If there is a title
containing a still picture, however, that function will
not operate. If you want to delete a protected entry,
disable Protect for it on the Lock item.
the œ √ buttons to select Yes, then
press the OK button.
4 Press
All title lists are deleted.
Setup
86- English
OK
Disc Navigation
Title List
Programme
MOVE
√
No
Setup
MOVE
Disc Navigation
Yes
√
OK
RETURN
EXIT
1-00687A-R120-UK_72~88
3/10/05
5:33 PM
Page 87
You will be prompted with the message 'Do you want
to finalise disc?'.
Finalising a disc
After you record titles onto a DVD-RW/DVD-R disc with
your DVD recorder, it needs to be finalised before it can
be played back on external devices.
DVD-RW(VR)
Disc Navigation
Playlist
Disc manager
1
Programme
With the unit in Stop mode, press the
MENU button.
DVD-RAM(VR)
Playlist
Disc manager
:
√
Disc Protection
: Not Protected
√
Disc Format
: DVD-VR
Do you want to finalise disc?
Disc Finalise
√
Delete All
YesTitle Lists
No
√
√
Setup
MOVE
Disc Navigation
Disc Manager
Disc Name
OK
RETURN
EXIT
Disc Navigation
Title List
√
DivX
√
Photo
√
Music
√
If you select Yes, you will be prompted again with the
message ' Disc will be finalised. Do you want to
continue?'
Programme
Setup
DVD-R(V)
MOVE
OK
RETURN
EXIT
Disc Manager
Disc Navigation
Disc Name
:
√
Disc manager
Disc Protection
: Not Protected
√
Programme
will be finalised.
DiscDisc
Finalise
Do you
to continue?
Delete
All want
Title Lists
Setup
the …† buttons to select Disc
2 Press
Manager, then press the OK or √ button.
DVD-RW(VR)
Disc Navigation
Playlist
Disc manager
Programme
MOVE
Yes
OK
√
√
No
RETURN
EXIT
Disc Manager
Disc Name
:
√
Disc Protection
: Not Protected
√
Disc Format
: DVD-VR
√
Disc Finalise
√
Delete All Title Lists
√
the œ √ buttons to select Yes, then
4 Press
press the OK button.
The disc is finalised.
Setup
MOVE
OK
RETURN
EXIT
■
Once a disc is finalised, you cannot
delete entries from the record list.
■
After being finalised, the DVD-R/DVDRW(video mode) operates in the same
manner as a DVD-Video.
■
Depending on the disc type, the displayed
screen may be different.
■
Finalising time may be different
depending on the amount of data
recorded on the disc.
■
Data on the disc will be damaged if the
recorder is powered off during finalise
process.
NOTE
the …† button to select Disc
3 Press
Finalise, then press the OK or √ button.
DVD-RW(VR)
Disc Navigation
Playlist
Disc manager
Programme
Disc Manager
Disc Name
:
√
Disc Protection
: Not Protected
√
Disc Format
: DVD-VR
√
Disc Finalise
√
Delete All Title Lists
√
Setup
MOVE
OK
RETURN
Disc manager
Programme
Editing
DVD-R(V)
Disc Navigation
EXIT
Disc Manager
Disc Name
:
√
Disc Protection
: Not Protected
√
Disc Finalise
√
Delete All Title Lists
√
Setup
MOVE
OK
RETURN
EXIT
English -87
1-00687A-R120-UK_72~88
3/10/05
5:33 PM
Page 88
Unfinalising a disc (V/VR mode)
the œ √ buttons to select Yes, then
4 Press
press the OK button.
The disc is unfinalised.
the unit in Stop mode, press the
1 With
MENU button.
■
NOTE
DVD-RW(VR:F)
Disc Navigation
Playlist
Disc manager
A DVD-RW can be finalised or unfinalised
in Video mode.
Disc Navigation
Title List
√
DivX
√
Photo
√
Music
√
Unfinalise
DVD-RW(V)
Additional recording, protection
Operation Same as DVD-Video
and deletion are possible.
Mark
Programme
Finalise
DVD-Video(RW)
Setup
MOVE
2
OK
RETURN
EXIT
A DVD-RW can be finalised or unfinalised
in VR mode.
Finalise
Unfinalise
Mark
DVD-RW(VR:F)
DVD-RW(VR)
Operation
Additional recording,
deletion, editing, and
protection are impossible.
Additional recording,
deletion, editing, and
protection are possible.
Press the …† buttons to select Disc
Manager, then press the OK or √ button.
DVD-RW(VR:F)
Disc Navigation
Playlist
Disc Manager
Disc Name
:
√
Disc Format
: DVD-VR
√
Disc Unfinalise
√
Disc manager
Programme
Setup
MOVE
OK
RETURN
EXIT
Press the …† button to select Disc
3 Unfinalise,
then press the OK or √ button.
You will be prompted with the message 'Do you want
to unfinalise disc?'.
DVD-RW(VR:F)
Disc Navigation
Playlist
Disc Manager
Disc Name
:
√
Disc Format
: DVD-VR
√
Disc Unfinalise
Disc manager Do you want to unfinalise disc?
Programme
Yes
√
No
Setup
MOVE
Editing
■
OK
RETURN
EXIT
If you select Yes, you will be prompted again with the
message ' Disc will be unfinalised. Do you want to
continue?'
DVD-RW(VR:F)
Disc Navigation
Playlist
Disc manager
Disc Manager
Disc Name
:
Disc Format
: DVD-VR
Disc will be unfinalised.
Disc Unfinalise
Do you want to continue?
Yes
Programme
√
√
√
No
Setup
MOVE
88- English
OK
RETURN
EXIT
1-00687A-R120-UK_89~94
3/10/05
5:35 PM
Page 89
Troubleshooting
Additional
Information
If your product malfunctions, go through the checkpoints below before contacting a Samsung authorised
service centre.
Power
The input is displayed for a while when the
power is turned on.
Checkpoint 1
The DVD recorder requires some time
to initialize and the input will be
displayed for approx. 10 seconds after
it is turned on.
Recording
Cannot record TV programmes.
Checkpoint 1
Check whether the power cord is
securely plugged into the power outlet.
Checkpoint 2
Did you set the DVD recorder channel
settings correctly?
Checkpoint 3
Check the free space on your
DVD-RAM/DVD-RW/DVD-R discs.
I pressed the REC button but there is no response.
Checkpoint 1
Recording is possible for DVDRAM/DVD-RW/DVD-R discs only.
If a programme is copy protected, it
cannot be recorded.
Additional Information
Troubleshooting ................................................89
Specification......................................................93
English -89
1-00687A-R120-UK_89~94
3/10/05
5:36 PM
Page 90
Playback
The angle operation does not work while playing a
DVD disc.
Cannot play the disc.
Checkpoint 1
Checkpoint 1
Check whether the disc is inserted
correctly with the label facing up.
Checkpoint 2
Check the regional code of the DVD
disc.
Checkpoint 3
This DVD recorder cannot play some
types of discs. (See pages 5, 53.)
The angle operation is available only
when the disc contains images
captured from different angles.
The selected audio and/or subtitle language is not
played.
icon appears on the screen.
Checkpoint 1
Checkpoint 1
You cannot use this operation or
function due to one of the following
reasons:
(1) Your DVD disc restricts it.
(2) Your DVD disc does not support this
feature (for example: angles)
(3) The feature is not available at the
moment.
(4) You've requested a title, chapter, or
scan time that is out of range.
Play mode settings are different from the settings
configured in the Settings menu.
Checkpoint 1
The disc does not support all selected
functions. In this case, some settings
configured in the settings menu may
not work properly.
Additional Information
Cannot change the aspect ratio.
Checkpoint 1
90- English
The aspect ratio is fixed for DVD discs.
(See pages 36.)
Audio and subtitle languages are
disc-specific. Only the sound and
subtitle languages contained on the
DVD disc are available and displayed in
the disc menu.
1-00687A-R120-UK_89~94
3/10/05
5:36 PM
Page 91
Video
Timer Recording
The disc revolves, but no image or bad quality
images are displayed.
Timer lamp flickers.
Checkpoint 1
Be sure that the Video Setting is
properly set. (See pages 36 ~ 38).
Checkpoint 2
Check whether there is damage to or
any foreign material on your disc.
Checkpoint 3
Some low quality discs may not play
properly.
Checkpoint 4
If scenes change from dark to bright
suddenly, the screen may shake
vertically temporarily, but this is not a
fault.
Checkpoint 1
Check there is enough space in the
disc for recording.
Checkpoint 2
Check whether the current disc is
recordable or not.
Make sure to check before the start
time of recording.
Timer recording does not work properly.
Checkpoint 1
Re-check the recording time and the
end time settings again.
Checkpoint 2
Recording will be cancelled if the power
is interrupted due to a power failure or
another similar reason while recording.
Sound
No sound.
Checkpoint 1
Are you watching a programme in slow
or skip mode?
If you are playing a programme at a
speed other than normal speed, sound
will not be heard.
Checkpoint 2
Check the connections and settings.
Checkpoint 3
Check whether the disc is damaged.
Clean the disc, if necessary.
Checkpoint 4
Check whether the disc is inserted
correctly with the label facing up.
No audio output.
Checkpoint 1
Additional Information
Check whether you have selected the
correct digital output options in the
Audio Output Options menu.
(See page 35.)
English -91
1-00687A-R120-UK_89~94
3/10/05
5:36 PM
Page 92
Remote Control
Other problems.
The remote control doesn't work.
Checkpoint 1
Point the remote control at the remote
control sensor on your DVD recorder.
Allow for proper distance. Remove
obstacles between your DVD recorder
and the remote control.
Checkpoint 2
Check whether the batteries are empty.
Checkpoint 3
Check for the TV/DVD selection button.
Other
I forget my password for parental supervision.
Checkpoint 1
Press the
button on the front panel of
the Recorder for more than 5 seconds with
no disc in the unit. All settings including the
password will revert to the factory settings.
Do not use this unless absolutely
necessary. (Note that this function is
possible only when no disc is inserted.)
Is it possible to change a subtitle and an audio signal on a recorded disc?
Additional Information
Checkpoint 1
92- English
A recorded disc is played with only the
subtitle and the audio signal which
were selected during recording.
Checkpoint 1
Read the table of contents and then
find and read the section describing
your problem, follow the instructions
given.
Checkpoint 2
Turn your DVD recorder off and on.
Checkpoint 3
If the problem still persists, contact a
nearby Samsung service centre.
1-00687A-R120-UK_89~94
3/10/05
5:36 PM
Page 93
Specifications
Power requirements
220-240V AC, 50Hz
Power consumption
35 Watts
Weight
General
2.9Kg
Dimensions
430mm(W) x 250mm(D) x 59mm(H)
Operating temp.
+5°C to +35°C
Other conditions
Keep level when operating. Less than 75% operating humidity
Input
Video
Composite Video : 1.0 V p-p at 75Ω load, sync negative
Audio
Max.Audio Input Level : 2Vrms
DV Input
IEEE 1394(4p) compatible jack
PAL I
Receivable Channels
AV1 (Scart TV)
Video : Composite, Audio: analogue
AV2 (Scart Ext)
Video : Composite, RGB Audio: analogue
Scart Jack
Analogue output jacks x 2
Audio
Optical/Coaxial digital audio output
Composite Video : Video output jack x 1
Output
Video
S-Video output x 1 (Y:1.0Vp-p, C:0.286Vp-p at 75Ω load)
Component output x 1 (Y: 1.0Vp-p, Pb: 0.70Vp-p, Pr: 0.70Vp-p at 75Ω load)
Scart Jack
AV1 (Scart TV)
Video : Composite, RGB Audio: analogue
Picture Compression format
MPEG-II
Audio Compression format
Dolby Digital 2ch/256kbps, MPEG-II
Recording
XP (about 8.5 Mbps), SP (about 4.5 Mbps), LP (about 2.5 Mbps),
Recording Quality
EP (about 1.6 Mbps or about 1.2 Mbps)
Audio Frequency Response
20 Hz ~ 20 kH
For DVD discs, audio signals recorded at 96kHz sampling
Audio Output frequency are converted and output at 48kHz.
DVD
AUDIO CD(CDDA)
Analogue Audio Output
48 / 96kHz
44.1kHz
Digital Audio Output
48kHz
44.1kHz
Additional Information
Disc Type
English -93
1-00687A-R120-UK_89~94
3/10/05
5:36 PM
Page 94
UNITED KINGDOM
This Samsung product is warranted for the period of
twelve (12) months from the original date of
purchase, against defective materials and
workmanship. In the event that warranty service is
required, you should return the product to the retailer
from whom it was purchased.
However, Samsung Authorised Dealers and
Authorised Service Centers in other EC Countries
will comply with the warranty on the terms issued to
purchasers in the country concerned.
In case of difficulty, details of our Authorised Service
Centers are available from:
Samsung Electronics (U.K.) Ltd.,
Euro Service Centre,
Stafford Park 12,
TELFORD, Shropshire TF3 3BJ,
Tel: 0870) 242 0303,
Fax: 01952) 297617
■ WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original
invoice or sales slip or confirmation, and the serial
number on the product has not been defaced.
2. Samsung’s obligations are limited to the repair or,
at its discretion, replacement of the product or the
defective part.
3. Warranty repairs must be carried out by Authorised
Samsung Dealers or Authorised Service Centers.
No re-imbursement will be made for repairs carried
out by non Samsung Dealers and, any such repair
work and damage to the products caused by such
repair work will not be covered by this warranty.
REPUBLIC OF
IRELAND
4. This product is not considered to be defective in
materials nor workmanship by reason that it
requires adaptation in order to conform to national
or local technical or safety standards in force in
any Country other than the one for which the
product was originally designed and manufactured. This warranty will not cover, and no reimbursement will be made for such adaptation nor
any damage which may result.
5. This warranty covers none of the following:
a) Periodic check ups, maintenance and repair or
replacement of parts due to normal wear and
tear.
b) Cost relating to transport, removal or installation
of the product.
c) Misuse, including the faiure to use this product
for its normal purposes or incorrect installation.
d) Damage caused by Lightning, Water, Fire, Acts
of God, War, Public Disturbances, incorrect
mains voltage, improper ventilation or any other
cause beyond the control of Samsung.
6. This warranty is valid for any person who legally
acquired possession of the product during the
warranty period.
7. The consumers statutory rights in any applicable
national legislation whether against the retailer
arising from the purchase contract or otherwise
are not affected by this warranty. Unless there is
national legislation to the contrary, the rights under
this warranty are the consumers sole rights and
Samsung, its subsidiaries and distributors shall not
be liable for indirect or consequential loss or any
damage to records, compact discs, videos or
audio taper or any other related equipment or
material.
SAMSUNG ELECTRONICS (U.K.) LTD.
1-00687A-R120-UK_Cover
3/10/05
5:14 PM
Page 2
Separate Disposal of Electrical & Electronic Equipment (Applicable in the European Union and
other European Countries requiring separate collection)
This symbol on the product or on its package/warranty indicates that this product shall not be treated as
unsorted municipal waste. It shall be separately returned to the applicable collection facilities for the
recycling of electrical and electronic equipment. By disposing of this product correctly, you will contribute
to reuse, recycling and other recovery of the product. This will help to conserve natural resource and to
reduce potential negative impacts to the environment and human health. For more further information
about return and collection system available to you, please contact your waste disposal service or the
seller of the product.
AK68-00687A-00
Download PDF

advertising