Samsung | WF1804WPC2 | Samsung WF1804WPC2 Benutzerhandbuch

WF1804WP(C/N/Q/S/U/V/W/Y)
WF1802WP(C/N/Q/S/U/V/W/Y)
WF1804YP(C/N/Q/S/U/V/W/Y)
WF1802YP(C/N/Q/S/U/V/W/Y)
WF1704WP(C/N/Q/S/U/V/W/Y)
WF1702WP(C/N/Q/S/U/V/W/Y)
WF1704YP(C/N/Q/S/U/V/W/Y)
WF1702YP(C/N/Q/S/U/V/W/Y)
Washing Machine
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
WF1804WP-03025A-07_EN.indd 1
2013-02-15
5:40:27
features of your new samsung
washing machine
Your new washing machine will change the way you feel about doing laundry. From
its super-size capacity to its energy efficiency, the Samsung washing machine has
all the features to turn a mundane chore into a pleasure.
• Eco Bubble Wash
Samsung’s effective Eco Bubble delivers improved cleanliness with advanced fabric care. Eco
Bubble allows detergent to distribute evenly and penetrate fabrics faster and deeper.
• Quick Wash
No time to waste! Our 15 minute Quick Wash will allow you to Wash and Run.
Our Quick Wash programme can help with your busy life - now you can wash your favourite
clothes (up to 2Kg) in just 15 minutes!
• Outdoor Care
Using a Samsung washing machine with Eco Bubble allows you to wash waterproof clothing
with greater comfort, in the knowledge that your washer provides excellent care for your
outdoor clothes. The Foam Cushion created by Eco Bubble protects against impact and
abrasion damage to the water proofing layer, minimizing damage to outdoor clothing, and
also protecting other forms of delicate fabrics.
• Baby Care
Your Samsung washing machine includes wash programs that add protection to the clothing
of children with sensitive skin.
These programs reduce skin irritation in children by minimizing detergent residue. In addition,
these programs classify laundry into various types and the wash is performed according to
the laundry characteristics so that children’s clothes feel refreshingly clean whenever they are
put on.
• Wool Certified
The machine has been tested and passed the required Woolmark Company specification
formachine washable wool products. This mark is the upgraded certification better than the
existing Woolmark, which guarantees not only washing performance but also fabric care for
wool products. Fabrics should be washed according to the instructions on the garment label
as specified byWoolmark and Samsung.
• Hand Wash
Special care can be determined by the appropriate temperature, the gentle wash action and
the appropriate amount of water.
2_ features
WF1804WP-03025A-07_EN.indd Sec1:2
2013-02-15
5:40:31
• Eco Drum Clean
Using Eco Drum Clean helps to keep washing machine clean even without any chemical
detergent or bleach. Keep your drum clean and odorless with specialized cleaning program.
• Child Lock
The Child Lock function ensures that curious little hands are kept out of your washing
machine.
This safety feature stops your children from playing with the operation of the washing
machine, and alerts you when it is activated.
• Delay End
Delay a cycle for up to 19 hours in one-hour increments and increase the convenience of
using your washing machine especially when you have to go out.
• Digital Graphic Display
The Digital Graphic Display control panel is clear and easy to use for minimum fuss and
hassle. And while it is easy to operate, the Digital Graphic Display enables you to make quick
and accurate adjustments to your wash for excellent washing results.
• Wide door
Extra wide door aperture for convenient viewing! Easily add and remove laundry, especially for
large sized laundry items such as bedding, towels etc.
• Aqua Hose & Leakage Sensor (Selected models)
The smartly designed water safety system for Samsung washing machines includes an
intelligent hose for stopping water leaks at the source and leakage sensor at the bottom. If the
hose breaks or if water leaks are detected, an internal sponge will expand to block water from
the spigot.
• Ceramic Heater for Durability & Energy Saving (selected models)
Our truly innovative Ceramic Heater is twice as durable as regular heaters.
That saves you money on repairs. Plus, it eliminates the scale of hard water and save energy.
This manual contains important information on the installation, use, and care of your new
Samsung washing machine. Refer to it for descriptions of the control panel, instructions on how
to use the washing machine, and tips for making the most of its state-of-the-art features and
functions. The “Troubleshooting and information codes” section on page 36 tells you what to
do if something goes wrong with your new washing machine.
features _3
WF1804WP-03025A-07_EN.indd Sec1:3
2013-02-15
5:40:31
safety information
Congratulations on your new Samsung ActivFresh™ washer. This manual contains
important information on the installation, use and care of your appliance. Please
take time to read this manual to take full advantage of your washer’s many benefits
and features.
WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS
Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the
extensive features and functions of your new appliance and retain it at a safe place near the appliance
for your future reference. Use this appliance only for its intended purpose as described in this instruction
manual.
Warnings and Important Safety Instructions in this manual do not cover all possible conditions and
situations that may occur. It is your responsibility to use common sense, caution, and care when installing,
maintaining, and operating your washer.
Because these following operating instructions cover various models, the characteristics of your washer
may differ slightly from those described in this manual and not all warning signs may be applicable. If you
have any questions or concerns, contact your nearest service center or find help and information online at
www.samsung.com.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user manual mean:
WARNING
Hazards or unsafe practices that may result in severe personal injury,
death and/or property damage.
CAUTION
Hazards or unsafe practices that may result in personal injury and/or
property damage.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury
when using your washer, follow these basic safety precautions:
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service centre for help.
Note
These warning signs are here to prevent injury to you and others.
Please follow them explicitly.
After reading this section, keep it in a safe place for future reference.
Read all instructions before using the appliance.
As with any equipment using electricity and moving parts, potential hazards exist. To safely
operate this appliance, become familiar with its operation and exercise care when using it.
4_ safety information
WF1804WP-03025A-07_EN.indd Sec2:4
2013-02-15
5:40:31
Do not let children (or pets) play on or in your
washing machine. The washing machine door does
not open easily from the inside, and children may
be seriously injured if trapped inside.
WARNING
This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and understand the
hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not
be made by children without supervision.
Children should be supervised to ensure that they
do not play with the appliance.
If the plug (power supply cord) is damaged, it must
be replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid a hazard.
This appliance should be positioned to be
accessible to the power plug, the water supply
tabs and the drain pipes.
For washing machines with ventilation openings in
the base, ensure that the opening is not obstructed
by carpet or any other obstacles.
Use the new hose-sets and old hose-sets should
not be reused.
safety information _5
WF1804WP-03025A-07_EN.indd Sec2:5
2013-02-15
5:40:31
safety information
WARNING
SEVERE WARNING SIGNS FOR INSTALLATION
The installation of this appliance must be performed by a qualified technician or service
company.
- Failure to do so may result in electric shock, fire, an explosion, problems with the
product, or injury.
The appliance is heavy, take care upon lifting it
Plug the power cord into an AC 220 V~240 V / 50 Hz wall socket or higher and use the
socket for this appliance only. In addition, do not use an extension cord.
- Sharing a wall socket with other appliances using a power strip or extending the power
cord may result in electric shock or fire.
- Ensure that the power voltage, frequency and current are the same as those of the
product specifications. Failure to do so may result in electric shock or fire. Failure Plug
the power plug into the wall socket firmly.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failure to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord runs towards
the floor.
- If you plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or fire.
Keep all packaging materials well out of the reach of children, as packaging materials can
be dangerous to children.
- If a child places a bag over its head, it may result in suffocation.
When the appliance or power plug or power cord is damaged, contact your nearest service
centre.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
- This may result in electric shock, fire, an explosion, or problems with the product
- Never plug the power cord into a socket that is not grounded correctly and make sure
that it is in accordance with local and national codes.
Do not install this appliance near a heater, inflammable material.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location of low temperature
- Frost may cause tubes to burst
Do not install this appliance in a location where gas may leak.
- This may result in electric shock or fire.
Do not use an electric transformer.
- It may result in electric shock or fire.
Do not use a damaged power plug, damaged power cord or loose wall socket.
- This may result in electric shock or fire.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
6_ safety information
WF1804WP-03025A-07_EN.indd Sec2:6
2013-02-15
5:40:31
Do not hook the power cord over a metal object, place a heavy object on the power cord,
insert the power cord between objects, or push the power cord into the space behind the
appliance.
- This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug.
- Unplug the power plug by holding the plug.
- Failure to do so may result in electric shock or fire.
Do not lay the power cord and tubes where you may fall over them.
CAUTION
CAUTION SIGNS FOR INSTALLATION
This appliance should be positioned in such a way that it is accessible to the power plug.
- Failure to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
- Failure to do so may result in abnormal vibrations, moves, noise, or problems with the
product.
WARNING
SEVERE WARNING SIGNS FOR USING
If the appliance is flooded, cut the water supply and power immediately and contact your
nearest service centre.
- Do not tough the power plug with wet hands
- Failure to do so may cause electric shock
If the appliance generates a strange noise, a burning smell or smoke, unplug the power
plug immediately and contact your nearest service centre.
- Failure to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without
touching the power plug. Do not touch the appliance or power cord.
- Do not use a ventilating fan.
- A spark may result in an explosion or fire.
Do not let children play in or on the washer. In addition, when disposing of the appliance,
remove the washer door lever.
- If trapped inside, the child may become trapped and suffocate to death.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the
washer before using it.
safety information _7
WF1804WP-03025A-07_EN.indd Sec2:7
2013-02-15
5:40:32
safety information
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or
other flammable or explosive substances.
- This may result in electric shock, fire or an explosion.
Do not open the washer door by force while it is operating (high-temperature washing/
drying/spinning).
- Water flowing out of the washer may result in burns or cause the floor to be slippery.
This may result in injury.
- Opening the door by force may result in damage to the product or injury.
Do not insert your hand under the washer.
- This may result in injury.
Do not touch the power plug with wet hands.
- This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in
progress.
- Plugging the power plug into the wall socket again may cause a spark and result in
electric shock or fire.
Do not let children or infirm persons use this washer unsupervised. Do not let children climb
in the appliance
- Failure to do so may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washer while it is operating.
- This may result in injury.
Do not unplug the appliance by pulling at the power cord, always grip plug firmly and pull
straight out from the outlet.
- Damage to the cord may cause short-circuit, fire and/or electric shock
Do not attempt to repair, disassemble, or modify the appliance yourself.
- Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse.
- When repairing or reinstalling the appliance is required, contact your nearest service
centre.
- Failure to do so may result in electric shock, fire, problems with the product, or injury.
If any foreign substance such as water has entered the appliance, unplug the power plug
and contact your nearest service centre.
- Failure to do so may result in electric shock or fire.
When the water supply hose comes loose from the faucet and floods the appliance, unplug
the power plug.
- Failure to do so may result in electric shock or fire.
Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder/lightning storm.
- Failure to do so may result in electric shock or fire.
8_ safety information
WF1804WP-03025A-07_EN.indd Sec2:8
2013-02-15
5:40:32
CAUTION
CAUTION SIGNS FOR USING
When the washer is contaminated by a foreign substance such as detergent, dirt, food
waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.
- Failure to do so may result in discoloration, deformation, damage or rust.
The front glass may be broken by a strong impact. Take care when using the washer.
- When the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the faucet
slowly.
Open the faucet slowly after a long period of non-use.
- The air pressure in the water supply hose or the water pipe may result in damage to a
part or in water leakage.
If a drain error occurs during an operation, check if there is a draining problem.
- If the washer is used when it is flooded because of a draining problem, it may result in
electric shock or fire due to electric leakage.
Insert the laundry into the washer completely so that laundry does not get caught in the
door.
- If laundry gets caught in the door, it may result in damage to the laundry or the washer,
or result in water leakage.
Ensure that the faucet is turned off when the washer is not being used.
- Ensure that the screw on the water supply hose connector is properly tightened.
- Failure to do so may result in property damage or injury.
Take care that the rubber seal and the front door glass are not contaminated by a foreign
substance (e.g. waste, thread, hair, etc.)
- If a foreign substance is caught in the door or the door is not completely closed, it may
cause a water leakage.
Open the faucet and check if the water supply hose connector is firmly tightened and that
there is no water leaking before using the product.
- If the screws or the water supply hose connector are loose, it may result in water
leakage.
To reduce the risk of fire or explosion:
- Under certain conditions, hydrogen gas may be produced in a hot water system such
as your hot water heater that has not been used for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If your hot water system has not been used for two weeks or
more, turn on all hot water taps in your home, and let the water flow for several minutes
before using your washing machine. This will release any hydrogen gas build–up. Since
hydrogen gas is flammable, do not smoke or light an open flame during this time.
Ventilate immediately without touching the power plug if there is a gas leak.
The appliance is designed for home use and used for domestic only.
The use for business purposes qualifies as product misuse. In this case, the product will not
be covered by the standard warranty provided by Samsung and no responsibility can be
attributed to Samsung for malfunctions or damages resulting from such misuse.
safety information _9
WF1804WP-03025A-07_EN.indd Sec2:9
2013-02-15
5:40:32
safety information
Do not stand on top of the appliance or place objects (such as laundry, lighted candles,
lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
- This may result in electric shock, fire, problems with the product, or injury.
Do not spray volatile material such as insecticide onto the surface of the appliance.
- As well as being harmful to humans, it may also result in electric shock, fire or problems
with the product.
Do not place an object that generates a electromagnetic field near the washer.
- This may result in injury due to a malfunction.
Since the water drained during a high-temperature wash or drying cycle is hot, do not
touch the water.
- This may result in burns or injury.
Do not wash, spin or dry water-proof seats, mats or clothing (*) unless your appliance has a
special program for washing these items.
- Do not wash thick, hard mats even if the washer mark is on the care label.
- This may result in injury or damage to the washer, walls, floor or clothing due to
abnormal vibrations.
* Woollen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers,
sweat suits, and bicycle, motor cycle, car covers, etc.
Do not operate the washer when the detergent box is removed.
- This may result in electric shock or injury due to water leakage.
Do not touch the inside of the tub during or just after drying as it is hot.
- This may result in burns.
Do not insert your hand into the detergent box after opening it.
- This may result in injury as your hand may be caught by the detergent input device.Do
not place any objects (such as shoes, food waste, animals) other than laundry into the
washer.
- This may result in damage to the washer, or injury and death in the case of pets due to
the abnormal vibrations.
Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
- This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare
shops or massage clinics.
- This may result in the rubber seal becoming deformed and water leakage.
Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long
periods of time.
- This may cause the tub to rust.
- If rust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the
surface and use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry
contaminated by dry cleaning detergent.
- This may result in spontaneous combustion or ignition due to the heat of the oxidation of
the oil.
Do not use hot water from water cooling/heating devices.
- This may result in problems with the washer.
10_ safety information
WF1804WP-03025A-07_EN.indd Sec2:10
2013-02-15
5:40:32
Do not use natural hand-washing soap for the washer.
- If it hardens and accumulates inside the washer, it may result in problems with the
product, discoloration, rust or bad odors.
Do not wash large laundry items such as bedding in the washing net.
- Place socks and brassieres into the washing net and wash them with the other laundry.
- Failure to do so may result in injury due to abnormal vibrations.
Do not use hardened detergent.
- If it accumulates inside the washer, it may result in water leakage.
For washing machines with ventilation openings in the base, ensure that the opening is not
obstructed by carpet or any other obstacles.
Make sure that the pockets of all clothing to be washed are empty.
- Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause
extensive damage to the appliance.
Do not wash clothing with large buckles, buttons, or other heavy metal.
WARNING
SEVERE WARNING SIGNS FOR CLEANING
Do not clean the appliance by spraying water directly onto it.
Do not use the strong acid cleaning agent.
Do not use benzene, thinner or alcohol to clean the appliance.
- This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
- Failure to do so may result in electric shock or fire.
INSTRUCTION ABOUT THE WEEE MARK
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate these items from other types of
waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take these items for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with other
commercial wastes for disposal.
safety information _11
WF1804WP-03025A-07_EN.indd Sec2:11
2013-02-15
5:40:32
contents
SETTING UP YOUR WASHING
MACHINE
13
14
14
14
15
15
15
15
15
Checking the parts
Meeting installation requirements
Electrical supply and grounding
Water Supply
Drain
Flooring
Surrounding temperature
Alcove or closet installation
Installing your washing machine
21
21
22
25
25
25
26
27
28
29
29
30
30
31
32
33
34
34
35
35
35
Washing for the first time
Basic instructions
Using the control panel
Child lock
Sound off
Delay end
Eco Bubble
Washing clothes using the cycle selector
Washing clothes manually
Detergent and additives information
Which detergent to use
Detergent drawer
Liquid Detergent (Selected models)
Eco drum clean
Draining the washing machine in an emergency
Cleaning the detergent drawer and drawer
recess
Cleaning the debris filter
Cleaning the exterior
Cleaning the water hose mesh filter
Repairing a frozen washing machine
Storing your washing machine
36
37
Check these points if your washing machine...
Information codes
CALIBRATING YOUR WASHING
MACHINE
38
Calibration mode
CYCLE CHART
39
Cycle chart
APPENDIX
40
40
40
41
Fabric care chart
Protecting the environment
Declaration of conformity
Sheet of household washing machines
13
WASHING A LOAD OF LAUNDRY
21
CLEANING AND MAINTAINING YOUR
WASHING MACHINE
31
TROUBLESHOOTING AND
INFORMATION CODES
36
38
39
40
12_ contents
WF1804WP-03025A-07_EN.indd Sec3:12
2013-02-15
5:40:32
setting up your washing
machine
CHECKING THE PARTS
Carefully unpack your washing machine, and make sure you’ve received all of the parts shown below.
If your washing machine was damaged during shipping, or if you do not have all of the parts, contact
Samsung Customer Service or your Samsung dealer.
01 SETTING UP
Be sure to have your installer follow these instructions closely so that your new
washing machine works properly and so that you’re not at risk of injury when doing
laundry.
Work top
Release lever
Detergent drawer
Plug
Control panel
Door
Drain hose
Debris filter
Adjustable feet
Tub
Emergency drain tube
Filter Cover
Spanner
* Bolt hole
covers
Cold
Hot (Selected model)
Hose guide
Water supply hose
Cap Fixer
(Selected
model)
Liquid
detergent
box (Selected
model)
* Bolt hole covers : The number of bolt hole covers depends on the model (3~5 covers).
setting up your new washing machine _13
WF1804WP-03025A-07_EN.indd Sec4:13
2013-02-15
5:40:32
setting up your washing
machine
MEETING INSTALLATION REQUIREMENTS
Electrical supply and grounding
To prevent unnecessary risk of fire, electrical shock, or personal injury, all wiring and grounding
must be done in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest
Revision and local codes and ordinances. It is the personal responsibility of the appliance owner
to provide adequate electrical service for this appliance.
WARNING
Never use an extension cord.
Use only the power cord that comes with your washing machine.
When preparing for installation, ensure that your power supply offers:
• AC 220-240 V / 50 Hz fuse or circuit breaker
• Individual branch circuit serving only your washing machine
Your washing machine must be grounded. If your washing machine malfunctions or breaks
down, grounding will reduce the risk of electric shock by providing a path of least resistance for
the electric current.
Your washing machine comes with a power cord having a three-prong grounding plug for use in
a properly installed and grounded outlet.
Never connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
Improperly connecting the equipment-grounding conductor can result electrical shock.
Check with a qualified electrician or serviceman if you are unsure if the washing machine is
properly grounded. Do not modify the plug provided with the washing machine. If it does not fit
the outlet, have a proper outlet installed by a qualified electrician.
Water Supply
Your washing machine will fill properly when your water pressure is 50 kPa ~ 800 kPa. Water
pressure less than 50 kPa may cause water valve failure, not allowing the water valve to shut
off completely. Or, it may take the washing machine longer to fill than what the controls allow,
resulting in your washing machine turning off. (A fill-time limit, designed to prevent overflows/
flooding if an internal hose becomes loose, is built into the controls.)
The water taps must be within 4 feet (122cm) of the back of your washing machine for the
provided inlet hoses provided to reach your washing machine.
Most plumbing supply stores sell inlet hoses of various lengths up to 10 feet (305cm) long.
You can reduce the risk of leaks and water damage by:
• Making water taps easily accessible.
• Turning off taps when the washing machine is not in use.
• Periodically checking for leaks at water inlet hose fittings.
WARNING
Before using your washing machine for the first time, check all connections at the water
valve and taps for leaks.
14_ setting up your new washing machine
WF1804WP-03025A-07_EN.indd Sec4:14
2013-02-15
5:40:33
Drain
Samsung recommends a standpipe height of 65 cm. The drain hose must be routed through
the drain hose clip to the standpipe. The standpipe must be large enough to accept the outside
diameter of the drain hose. The drain hose is attached at the factory.
For best performance, your washing machine must be installed on a solidly constructed floor.
Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting
and soft tile surfaces are contributing factors to vibrations and the tendency for your washing
machine to move slightly during the spin cycle.
01 SETTING UP
Flooring
Never install your washing machine on a platform or poorly supported structure.
Surrounding temperature
Do not install your washing machine in areas where water may freeze, since your washing
machine always retains some water in its water valve, pump, and hose areas. Frozen water in
the lines can cause damage to belts, the pump, and other components.
Alcove or closet installation
To operate safely and properly, your new washing machine requires minimum clearances of:
Sides – 25 mm
Rear – 51 mm
Top – 25 mm
Front – 465 mm
If both the washing machine and a dryer are installed together, the front of the alcove or closet
must have at least 465 mm unobstructed air opening. Your washing machine alone does not
require a specific air opening.
INSTALLING YOUR WASHING MACHINE
STEP 1
Selecting a location
Before you install the washing machine, make sure the location:
•
•
•
•
•
•
Has a hard, level surface without carpeting or flooring that may obstruct ventilation
Is away from direct sunlight
Has adequate ventilation
Will not be freezing (below 32 ˚F or 0 ˚C)
Is away from heat sources such as oil or gas
Has enough space so that the washing machine doesn’t stand on its power cord
setting up your new washing machine _15
WF1804WP-03025A-07_EN.indd Sec4:15
2013-02-15
5:40:33
setting up your washing
machine
STEP 2
Removing the shipping bolts
Before installing the washing machine, you must remove the five shipping bolts from the back of
the unit.
1. Loosen all the bolts with the supplied wrench.
2. Hold the bolt with the spanner and pull it through the wide
section of the hole. Repeat for each bolt.
Option
3. Fill the holes with the supplied plastic covers.
Option
4. Store the shipping bolts away safely in case you have to move the washing machine in the
future.
WARNING
Packaging materials can be dangerous to children; keep all packaging material (plastic
bags, polystyrene, etc.) well out of the reach of children.
Insert the cap fixer, (one of the
accessories in the vinyl pack), into the
hole from which you removed the power
cord at the back of the product (Selected
model).
16_ setting up your new washing machine
WF1804WP-03025A-07_EN.indd Sec4:16
2013-02-15
5:40:33
STEP 3
Adjusting the levelling feet
When installing your washing machine, ensure that the power plug, the water supply and
the drain are easily accessible.
01 SETTING UP
1. Slide the washing machine into position.
2. Level your washing
machine by turning the
leveling feet in and out as
necessary by hand.
3. When your washing machine is level, tighten the nuts using
the wrench supplied with your washing machine.
STEP 4
Connecting the water and drain
Connecting the water supply hose
1. Take the L-shaped arm fitting for the cold water
supply hose and connect it to the cold water supply
intake on the back of the machine. Tighten by hand.
Option
The water supply hose must be connected to the
washing machine at one end and to the water tap
at the other. Do not stretch the water supply hose.
If the hose is too short, replace the hose with a
longer, high pressure hose.
2. Connect the other end of the cold water supply hose
to your sink’s cold water tap and tighten it by hand.
If necessary, you can reposition the water supply
hose at the washing machine end by loosening the
fitting, rotating the hose, and retightening the fitting.
For selected models with an additional hot water intake:
1. Take the red L-shaped arm fitting for the hot water supply hose and connect it to the hot
water supply intake on the back of the machine. Tighten by hand.
2. Connect the other end of the hot water supply hose to your sink’s hot water tap and tighten
it by hand.
3. Use a Y-piece if you only want to use cold water.
setting up your new washing machine _17
WF1804WP-03025A-07_EN.indd Sec4:17
2013-02-15
5:40:33
setting up your washing
machine
Connecting the water supply hose (selected models)
1. Remove the adaptor from the water supply hose.
Adaptor
Water supply
hose
2. First, using a ‘+’ type screwdriver, loosen the four screws
on the adaptor. Next, take the adaptor and turn part (2)
following the arrow until there is a 5 mm gap.
1
5 mm
2
3. Connect the adaptor to the water tap by tightening the
screws firmly while lifting the adaptor upwards.
Turn part (2) following the arrow and connect (1) and (2).
Water tap
1
2
4. Connect the water supply hose to the adaptor.
When you release part (3), the hose automatically
connects to the adaptor making a ‘click’ sound.
After you have connected the water supply
hose to the adaptor, ensure that it is connected
correctly by pulling the water supply hose
downwards.
3
5. Connect the other end of the water supply hose to the inlet
water valve at the rear of the washing machine. Screw the
hose clockwise all the way in.
Option
18_ setting up your new washing machine
WF1804WP-03025A-07_EN.indd Sec4:18
2013-02-15
5:40:34
6. Turn on the water supply and ensure that no water leaks
from the water valve, tap or adaptor. If there is a water
leaks, repeat the previous steps.
WARNING
✗
✗
01 SETTING UP
•
Do not use your washing machine if there is a water leak.
This may cause electric shock or injury.
If the water tap has a screw type tap, connect the water
supply hose to the tap as shown.
Use the most conventional type of tap for the water supply. In case the tap is square or too
big, remove the spacing ring before inserting the tap into the adaptor.
Connecting the Aqua Hose (Selected models)
The Aqua Hose was invented for perfect leakage protection.It
is attached to the water supply hose and automatically cuts off
the water flow if the hose is damaged. It also displays a warning
indicator.
•
Connect the water supply hose to the tap as shown.
setting up your new washing machine _19
WF1804WP-03025A-07_EN.indd Sec4:19
2013-02-15
5:40:34
setting up your washing
machine
Connecting the drain hose
The end of the drain hose can be positioned in three ways:
1. Over the edge of a wash basin: The drain hose must be placed at a height of between 60
and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure
the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose
from moving.
60 ~ 90 cm
Drain hose
Hose guide
2. ln a sink drain pipe branch: The drain pipe branch must be above the sink siphon so that
the end of the hose is at least 60 cm above the ground.
3. ln a drain pipe: We recommend using a 65 cm high vertical pipe; it must be no shorter than
60 cm and no longer than 90 cm.
• minimum diameter 5 cm.
• minimum carry-away capacity 60 liter per minute.
60 ~ 90 cm
The standpipe drain requires;
STEP 5
Powering your washing machine
Plug the power cord into a wall sockets, an AC 220-240 V / 50 Hz approved electrical outlet
protected by a fuse or circuit breaker. (For more information on electrical and grounding
requirements, see page 14.)
Test run
Make sure that you install your washing machine correctly by running the Rinse+Spin cycle
after the installation is complete.
20_ setting up your new washing machine
WF1804WP-03025A-07_EN.indd Sec4:20
2013-02-15
5:40:34
washing a load of laundry
With your new Samsung washing machine, the hardest part of doing laundry will be
deciding which load to wash first.
WASHING FOR THE FIRST TIME
1. Press the Power button.
2. Add a little detergent to the detergent compartment
the detergent drawer.
3. Turn on the water supply to the washing machine.
4. Press the Start/Pause button.
in
This will remove any water that might be left over in the
machine from the manufacturer’s test run.
Compartment
Compartment
Compartment
: Detergent for prewash, or starch.
: Detergent for the main wash, water softener, pre-soaking agent, bleach and
stain removal product.
: Additives, e.g. fabric softener or former (fill no higher than lower edge (MAX)
of “A”)
02 WASHING A LOAD OF LAUNDRY
Before washing laundry for the first time, you must run a complete empty cycle (i.e. no laundry).
BASIC INSTRUCTIONS
1. Load your laundry into the washing machine.
WARNING
Do not overload the washing machine. To determine the load capacity for each type of
laundry, refer to the chart on page 29.
• Make sure that laundry is not caught in the door, as this may cause a water leak.
• Washing detergent may remain in the front rubber part of the washer after a wash cycle.
Remove any remaining detergent, as they may cause a water leak.
• Do not wash water-proofed items.
2.
3.
4.
5.
Close the door until it latches.
Turn the power on.
Add detergent and additives to the dispenser drawer.
Select the appropriate cycle and options for the load.
The Wash Indicator light will illuminate and the estimated cycle time will appear in the display.
6. Press the Start/Pause button.
washing a load of laundry _21
WF1804WP-03025A-07_EN.indd Sec5:21
2013-02-15
5:40:35
washing a load of laundry
USING THE CONTROL PANEL
1
1
2
DIGITAL GRAPHIC
DISPLAY
3
4
1
5
6
7
8
9
10
11
12
Displays the remaining wash cycle time, all cycle information, and error
messages.
Select the tumble pattern and spin speed for the cycle.
For detailed information, refer to “Washing clothes using the cycle
selector” (see page 27).
2
CYCLE SELECTOR
Cotton - For averagely or lightly soiled cotton, bed linen, table linen,
underwear, towels, shirts, etc.
Synthetics - For averagely or lightly soiled blouses, shirts, etc., made
of polyester (diolen, trevira), polyamide (perlon, nylon) or other similar
blends.
Denim - A higher water level in the main wash and extra rinse ensure
that no washing powder remains that may mark your clothing.
Bedding - For bed spread, bed sheet, duvet cover etc.
Wash under 2 kg and only 1 kind of bedding to achieve the best
result.
Dark Garment - Additional rinses and reduced spinning ensure that your
favourite dark clothes are washed gently and rinsed thoroughly.
Daily Wash - Use for everyday items such as underwear and shirts.
Eco Drum Clean - Use for drum cleaning. It cleanses dirt and bacteria
of drum. Regular use (after every 40 washes) is recommended. No
detergent or bleach needed.
Super Eco Wash - Low temperature Eco Bubble ensures that you
achieve perfect wash results while allowing effective energy saving.
Outdoor Care - Use for outdoor wear such as mountain clothes,
skiwear, and sports wear. Fabrics include functional technology finishes
and fibers such as spandex, stretch, and micro-fiber.
Baby Care - High temperature wash and extra rinses ensure that no
washing powder remains to mark your thin clothes.
Wool - Only for machine-washable wool. A load should be less than 2.0
kg.
• The wool course washes the laundry using gentle cradling actions.
During the wash, the gentle cradling and soaking actions are
continued to protect the wool fibers from shrinkage / distortion and
for a super gentle clean. This stop operation is not a problem.
• Neutral detergent is recommended for wool course, for improved washing
results and for improved care of the wool fibers.
22_ washing a load of laundry
WF1804WP-03025A-07_EN.indd Sec5:22
2013-02-15
5:40:35
Hand Wash - A very light wash cycle as gentle as a hand wash.
Spin - Performs an additional spin cycle to remove more water.
Rinse + Spin - Use for a load that needs rinsing only or to add rinseadded fabric softener to a load.
3
PREWASH
SELECTION BUTTON
Press this button to select pre-wash. Pre-wash is only available with:
Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Baby
Care.
4
DELAY END
SELECTION BUTTON
Press this button repeatedly to cycle through the available Delay End
options (from 3 hours to 19 hours in one hour increments).The hour
displayed indicates the time when the wash cycle will be finished.
5
TEMPERATURE
SELECTION BUTTON
Press this button repeatedly to cycle through the available water
temperature options:
(Cold Water , 30 ˚C, 40 ˚C, 60 ˚C and 95 ˚C).
6
RINSE SELECTION
BUTTON
Press this button to add additional rinse cycles. The maximum number
of rinse cycles is five.
02 WASHING A LOAD OF LAUNDRY
The wool wash cycle of this machine has been approved
by Woolmark for the washing of machine-washable
Woolmark products provided that the products are
washed according to the instructions on the garment
label and those issued by the manufacturer of this
washing machine, M0814 for WF18***** series, M0815
for WF17***** series. (Certificate Number issued by IWS
NOM INEE Co., Ltd.)
Press the button repeatedly to cycle through the available speeds for the
spin cycle.
7
SPIN SELECTION
BUTTON
WF1804/WF1704
,
, 400, 800, 1200, 1400 rpm
WF1802/WF1702
,
, 400, 800, 1000, 1200 rpm
“No spin ” - The laundry remains in the drum and no spin cycle is
performed after the final drain.
“Rinse Hold
” -The laundry remains soaking in the final rinse water.
Before the laundry can be unloaded, either a Drain or Spin cycle must be
performed.
Press this button repeatedly to cycle through the wash options:
Soak
 Intensive
 Easy Iron
 Soak
+ Intensive
Soak
+ Easy Iron
 Intensive
+ Easy Iron
 Soak
Intensive
+ Easy Iron
 off
8
WASH OPTION
SELECTION BUTTON

+
”: Press this button when the laundry is heavily soiled and
“Intensive
needs to be washed intensively. The cycle time is increased for each
cycle.“Soak
”: Use this option to effectively remove stains from your
laundry by soaking your laundry.
• The Soak function is performed 13 minutes into the wash cycle.
• The Soak function continues for 30 minutes with six cycles, where
one cycle is a soak cycle that spins for 1 minute and stands still for 4
minutes.
• The Soak function is only available for the following wash programs:
Cotton, Synthetics, Denim, Bedding, Baby care, Daily wash.
“Easy Iron
”: Use this option to prepare your laundry so that it can be
easily ironed.
washing a load of laundry _23
WF1804WP-03025A-07_EN.indd Sec5:23
2013-02-15
5:40:36
washing a load of laundry
ECO BUBBLE
SELECTION BUTTON
Eco Bubble selection is turned on as a default. Press the Eco Bubble
option button once to deselect and the Bubble Generator OFF (shown
on the panel), press it again to turn the function back ON.
• Some wash cycles must have Eco Bubble option ON (will show on
the panel, and the Generator will turn on automatically).
• Other wash cycles do not need this option and automatically turn the
Generator OFF.
• On many cycles, you can manually adjust this option, which will
visibly affect wash time on the panel to achieve results (please see
page 26 for more information).
10
QUICK WASH
SELECTION BUTTON
For lightly soiled garments and less than 2 kg laundry that you require
quickly. It takes about minimum 15 minute, but can vary from the
indicated values depending on water pressure, water hardness, water
inlet temperature, room temperature, type and amount of washing and
degree of soiling, utilized detergent unbalaced load, fluctuation in the
electricity supply and extra options selected.
• Press this button repeatedly to choose cycle time: 15min  20min 
30min  40min  50min  60min  70min  80min  90min 
Off
Powdered/Liquid detergent should be under 20 g(for 2 kg load) or
WARNING detergent may remain on the clothes.
11
START/PAUSE
SELECTION BUTTON
Press to pause and restart a cycle.
12
POWER BUTTON
Press it once to turn your washing machine on, press it again to turn
your washing machine off.
If the washing machine is left on for more than 10 minutes without any
buttons being touched, the power automatically turns off.
9
24_ washing a load of laundry
WF1804WP-03025A-07_EN.indd Sec5:24
2013-02-15
5:40:36
Child lock
The Child Lock function allows you to lock the buttons so that the wash cycle you’ve chosen
can’t be changed.
Activating/Deactivating
When the Child Lock function is activated, only the
Power button works. The Child Lock function remains
on even after the power is turned on and off or after the
disconnecting and reconnecting the power cord.
3 SEC.
Sound off
The Sound Off function can be selected during all courses. When this function is selected, sound
is turned off for all courses. Even if the power is turned on and off repeatedly, the setting is
retained.
02 WASHING A LOAD OF LAUNDRY
If you want to activate or deactivate the Child Lock function,
press the Temp. and Rinse buttons at the same time for
3 seconds. “Child Lock ” will be lit when this feature is
activated.
Activating/Deactivating
If you want to activate or deactivate the Sound Off function,
press the Spin and Option button at the same time for 3
seconds. The “Sound Off ”will be lit when this feature is
activated.
3 SEC.
Delay end
You can set the washing machine to finish your wash automatically at a later time, choosing a
delay of between 3 to 19 hours (in 1 hour increments). The hour displayed indicates the time at
which the wash will be finished.
1. Manually or automatically set your washing machine according to the type of laundry you are
washing.
2. Press the Delay End button repeatedly until the delay time is set.
3. Press the Start/Pause button. The “Delay End ” indicator will be lit, and the clock will
begin counting down until it reaches the set time.
4. To cancel a Delay End function, press the Power button and then turn the washing machine
on again.
washing a load of laundry _25
WF1804WP-03025A-07_EN.indd Sec5:25
2013-02-15
5:40:37
washing a load of laundry
Eco Bubble
Eco Bubble allows detergent to distribute evenly and penetrate fabrics faster and deeper.
The bubble function is available in all courses except for Eco Drum Clean course and the
function availability is as follows.
Course
Cotton, Synthetics, Denim,
Bedding, Dark Garment, Daily Wash
Super Eco Wash, Outdoor Care,
Baby Care, Wool, Hand Wash
Eco Drum Clean
Bubble function
Canceling the bubble function
Available
Available
Not available
Not available
-
•
1.
2.
3.
4.
A different bubble function may be applied depending the course.
Eco Bubble selection is default. Press it once to deselect bubble option, press it again to
select bubble option.
Open the door, place the laundry inside the wash tub and close the door.
Press the Power button.
Select a function.
Place the appropriate amount of detergent and fabric softener into the corresponding
compartments depending on the amount of laundry and close the detergent drawer.
• Add the appropriate amount of detergent into the
detergent compartment , and add the fabric softener
to softener compartment
just under the fiber softener
base line (MAX) of “A”)
• When the Prewash course is selected, add detergent
into the prewash compartment
as well.
• To use liquid detergent, leave the liquid detergent box in
the drawer(refer to “Liquid Detergent” section on page
30).
Do not add powdered detergent into the liquid
detergent box.
5. Press the Start/Pause button.
• Press the Start/Pause button to start the wash.
• The amount of the laundry is automatically detected and the laundry is washed.
• Once a washing machine operation begins, you cannot add or select the bubble function.
•
•
•
•
Enough bubbles are generated with the specified amount of detergent.
Please clean the Debris filter frequently. Periodic cleaning helps generate sufficient
bubbles.
Depending on the detergent and the laundry, the bubbles may be absorbed and seem
like a small quantity.
Although bubbles are generated once the wash begins, it may take several minutes for
users to see them.
26_ washing a load of laundry
WF1804WP-03025A-07_EN.indd Sec5:26
2013-02-15
5:40:38
Washing clothes using the cycle selector
Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Bedding, Dark
Garment, Daily Wash and Baby Care cycles. It is only necessary if your clothing is heavily
soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton, Synthetics, Denim, Bedding, Dark Garment, Daily Wash, Eco Drum Clean, Super Eco
Wash, Outdoor Care, Baby Care, Wool, Hand Wash. The relevant indicators will illuminate on
the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the Start/Pause button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
02 WASHING A LOAD OF LAUNDRY
Your new washing machine makes washing clothes easy, using Samsung’s “Fuzzy Control”
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink’s water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the display will show “End” for 5 minutes, and then the
powerturns off automatically.
1. Open the door.
2. Remove laundry.
washing a load of laundry _27
WF1804WP-03025A-07_EN.indd Sec5:27
2013-02-15
5:40:39
washing a load of laundry
Washing clothes manually
You can wash clothes manually without using the Cycle Selector.
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles loosely into the drum one at a time, without overfilling it.
5. Close the door.
6. Add detergent and, if necessary, softener or prewash detergent, into the appropriate
compartments.
7. Press the Temp. button to select the temperature. (Cold water, 30 ˚C, 40 ˚C, 60 ˚C, 95 ˚C)
8. Press the Rinse button to select the required number of rinse cycles.
The maximum number of rinse cycles is five.
The wash duration is increased accordingly.
9. Press the Spin button to select the spin speed.
The rinse hold function allows you to remove items that are still wet from the washing
machine. (
: Rinse Hold)
: No Spin,
10. Press the Delay End button repeatedly to cycle through the available Delay End options
(from 3 hour to 19 hours in one hour increments). The hour displayed indicates the time at
which the wash will be finished.
11. Press the Start/Pause button and the machine will begin the cycle.
LAUNDRY GUIDELINES
Follow these simple guidelines for the cleanest laundry and the most efficient wash.
Always check the Care label on clothing before washing.
Sort and wash your laundry according to the following criteria:
• Care Label: Sort laundry into cotton, mixed fibres, synthetics, silks, wool and rayons.
• Colour: Divide whites and colours. Wash new colour items separately.
• Size: Placing items of different sizes in the same load will improve the wash action.
• Sensitivity: Wash delicate items separately, using the Delicate wash cycle for pure, new
woollen items, curtains and silk articles. Check the labels on the items you are washing or
refer to the fabric care chart in the appendix.
Emptying pockets
Before each wash, empty all the pockets of your laundry. Small, irregularly shaped hard objects,
such as coins, knives, pins, and paperclips could damage your washing machine. Do not wash
clothing with large buckles, buttons, or other heavy metal objects.
Metal on clothing may damage your clothing as well as the tub. Turn clothing with
buttons and embroidered clothes inside out before washing them. If zips of pants and
jackets are open while washing, the spin basket may be damaged. Zips should be
closed and fixed with a string before washing.
Clothing with long strings may become entangled with other clothes damaging them. Be sure to
fix the strings before starting the wash.
Prewashing cotton
Your new washing machine, combined with modern detergents, will give perfect washing results,
thus saving energy, time, water and detergent. However, if your cotton is particularly dirty,
prewash with a protein-based detergent.
28_ washing a load of laundry
WF1804WP-03025A-07_EN.indd Sec5:28
2013-02-15
5:40:39
Determining the load capacity
Do not overload the washing machine or your laundry may not wash properly. Use the chart
below to determine the load capacity for the type of laundry you are washing.
Fabric Type
Load Capacity
WF1804 / WF1802
WF1704 / WF1702
Cotton
- average/lightly soiled
- heavily soiled
8.0 kg
7.0 kg
Synthetics
3.0 kg
3.0 kg
Denim
3.0 kg
3.0 kg
Bedding
2.0 kg
2.0 kg
Outdoor Care
2.0 kg
2.0 kg
Wool
2.0 kg
2.0 kg
• When the laundry is unbalanced (“UE” lights up on the display), redistribute the load.
If the laundry is unbalanced, the spin efficiency may be degraded.
• When washing Bedding or Duvets, the wash time may be lengthened or the spin
efficiency may be degraded.
• For Bedding or Duvets, the recommended load capacity is 2.0(kg) or less.
02 WASHING A LOAD OF LAUNDRY
Model
Make sure to insert brassieres (water washable) into a laundry net (to be
purchased additionally).
• The metal parts of the brassieres may break through the material and damage the
laundry. Therefore make sure to place them inside a fine laundry net.
• Small, light clothing such as socks, gloves, stockings and
handkerchiefs may become caught around the door. Place them
inside a fine laundry net.
CAUTION
Do not wash the laundry net by itself without other laundry. This may
cause abnormal vibrations that could move the washing machine
and cause an accident resulting in injury.
DETERGENT AND ADDITIVES INFORMATION
Which detergent to use
The type of detergent you should use is based on the type of fabric (cotton, synthetics, items,
Hand Wash For Wool), colour, wash temperature, and degree of soiling. Always use “low suds”
laundry detergent, which is designed for automatic washing machines.
Follow the detergent manufacturer’s recommendations based on the weight of the laundry, the
degree of soiling, and the hardness of the water in your area. If you do not know how hard your
water is, enquire at your local water authority.
Do not use detergent that has hardended or solidified as the detergent may remain in
the rinse cycle. It may cause your washing machine to not rinse properly or result in the
overflow becoming blocked.
Please note the following when using the Wool course.
• Use a neutral liquid detergent for wool only.
• When using a powder detergent, it may remain on the laundry and cause damage to the
material (wool).
washing a load of laundry _29
WF1804WP-03025A-07_EN.indd Sec5:29
2013-02-15
5:40:39
washing a load of laundry
Detergent drawer
Your washing machine has separate compartments for dispensing detergent and fabric softener.
Add all laundry additives to the correct compartment before starting your washing machine.
Do NOT open the detergent drawer when your washing machine is running.
1. Pull out the detergent drawer on the left side of the control panel.
2. Add the recommended amount of laundry detergent
directly into the detergent compartment
before starting
your washing machine.
3. Add the recommended amount of fabric softener into the
if required.
softener compartment
CAUTION
Do NOT add any powder/liquid detergent to the softener
compartment ( ).
4. When using the Prewash option, add the recommended
amount of laundry detergent into the prewash
compartment .
When washing large items do NOT use the following
detergent types.
MAX
• Tablet and capsule type detergents
• Detergents using a ball and net
Concentrated or thick fabric softener and conditioner
must be diluted with a little water before being poured
into the dispenser (prevents the overflow from becoming
blocked.)
Be careful that the fabric softener does not overflow, when you close the detergent drawer
after adding fabric softener into the rinse detergent compartment.
Liquid Detergent (Selected models)
To use liquid detergent, place the liquid detergent box into the main wash section of the
detergent drawer and pour liquid detergent into the liquid detergent box.
• DO NOT fill above the MAX line.
Liquid
• When using powdered detergent, remove the liquid
detergent box
detergent box from the detergent drawer. Powdered
detergent will not dispense with liquid detergent box.
• After a wash, some liquid may remain in the detergent
drawer.
30_ washing a load of laundry
WF1804WP-03025A-07_EN.indd Sec5:30
2013-02-15
5:40:39
cleaning and maintaining your
washing machine
Keeping your washing machine clean improves its performance, wards off
unnecessary repairs, and lengthens its life.
This course is a self-cleaning course that removes mold that may occur inside the
washing machine.
1. Press the Power button.
2. Turn the Cycle Selector to the ECO Drum Clean course.
• You can only use the Delay End function.
• The water temperature during the ECO Drum Clean is
set to 70 ˚C.
You cannot change the temperature.
•
It will auto set cotton 30 ˚C middle water level program
when cloth is put in.
03 CLEANING AND MAINTAINING
ECO DRUM CLEAN
3. Place the appropriate amount of cleansing agent into the
and close the detergent drawer
detergent compartment
(when cleaning the drum using a cleansing agent).
• Be sure to use the recommended cleansing agent for
cleaning the drum.
•
There are powder-type and liquid-type drum cleansing
agents. The liquid-type cleaning agent is only available
with liquid detergent box (option).
4. Press the Start/Pause button.
• If you press the Start/Pause button, the ECO Drum Clean course begins.
CAUTION
•
•
•
•
•
•
•
Using the ECO Drum Clean course, you can clean the drum without using a cleansing agent.
Never use the ECO Drum Clean course when laundry is in the washing machine. This may
result in damage to the texture or a problem with the washing machine.
In the ECO Drum Clean course, never use normal detergent.
Use only 1/10 of the amount of the drum cleansing agent recommended by the
cleansing agent manufacturer.
Since using a chlorine bleaching agent may discolour the product, be sure to use only
oxygen bleaching agents.
Powder-type cleansing agent: Use a [powder-type bleaching agent] or a [cleansing agent for
drum cleaning only].
Liquid-type cleansing agent: Use a [liquid-type oxygen bleaching agent] or a [cleansing agent
for drum cleaning only].
The ECO Drum Clean Auto Alarm Function
•
•
If the “ECO Drum Clean” indicator on the display is lit after a wash, it indicates that tub (drum)
cleaning is required. In this case, remove the laundry from the washing machine, turn the
power on, and clean the drum by performing the ECO Drum Clean course.
If you do not perform the ECO Drum Clean course, the “ECO Drum Clean” indicator on the
display is turned off. However, the “ECO Drum Clean” indicator on the display and the lamp
on the Cycle Selector are turned on again after two washes are performed. However, this will
not result in a problem with the washing machine.
cleaning and maintaining your washing machine _31
WF1804WP-03025A-07_EN.indd Sec6:31
2013-02-15
5:40:40
cleaning and maintaining your
washing machine
•
•
Although generally, the ECO Drum Clean Auto Alarm
appears once a month or so, the frequency may differ
depending on the number of times the washing machine is
used.
In case of the alarm, please also clean the debris
filter (refer to “Cleaning the debris filter” section on
page 34). Otherwise the performance of the bubble
function may lower down.
DRAINING THE WASHING MACHINE IN AN EMERGENCY
1. Unplug the washing machine from the power supply.
2. Open the filter cover by pressing down and pulling its
handle.
Filter cover
3. Open the emergency drain cap by pulling it.
Emergency
drain cap
4. Hold the cap on the end of the emergency drain tube and
slowly pull it out about 15 cm.
5. Allow all the water to flow into a bowl.
Emergency
drain tube
Remain water maybe more than you expected. Prepare
larger bowl.
6. Reinsert the emergency drain cap and the drain tube.
7. Replace the filter-cover.
32_ cleaning and maintaining your washing machine
WF1804WP-03025A-07_EN.indd Sec6:32
2013-02-15
5:40:40
CLEANING THE DETERGENT DRAWER AND DRAWER RECESS
Release lever
Liquid detergent box(Option)
Liquid detergent divider
3. Wash all parts under running water.
03 CLEANING AND MAINTAINING
1. Press the release lever on the inside of the
detergent drawer and pull the drawer out.
2. Remove the rinse divider and the liquid
detergent box(option) from the detergent
drawer.
4. Clean the drawer recess with an old toothbrush.
5. Replace the rinse divider and the liquid detergent box
(option) by pushing it firmly into the drawer.
6. Push the drawer back into place.
7. To remove any remaining detergent, perform a rinse cycle
without any laundry in the drum.
cleaning and maintaining your washing machine _33
WF1804WP-03025A-07_EN.indd Sec6:33
2013-02-15
5:40:41
cleaning and maintaining your
washing machine
CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter 5 or 6 times a year, or when the error message of “5E” is
displayed. (Refer to “Draining the washing machine in an emergency” in the previous page.)
Before cleaning the debris filter, make sure to unplug the power cord.
CAUTION
1. Remove the remaining water first (refer to “Draining the
washing machine in an emergency” on page 32.)
If you separate the filter without draining the remaining
water, the remaining water may trickle out.
2. Open the filter cover by using a key or coin.
3. Unscrew the emergency drain cap by turning it to the left
and drain off all the water.
4. Unscrew the debris filter cap.
Debris filter cap
5. Wash any dirt or other material from the debris filter. Make
sure the drain pump propeller behind the debris filter is not
blocked.
6. Replace the debris filter cap.
7. Replace the filter cover.
CAUTION
Do not open the debris filter cap while the machine is running or hot
water may flow out.
•
Make sure to replace the filter cap after the filter cleaning. If the filter is out of the machine, your
washing machine may malfunction or leak water.
•
The filter should be fully assembled after the filter cleaning.
CLEANING THE EXTERIOR
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth using a
nonabrasive household detergent.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water onto the washing machine.
34_ cleaning and maintaining your washing machine
WF1804WP-03025A-07_EN.indd Sec6:34
2013-02-15
5:40:42
CLEANING THE WATER HOSE MESH FILTER
You should clean the water hose mesh filter at least once a year, or when the error message of “4E” is
displayed:
04 TROUBLESHOOTING
1. Turn off the water supply to the washing machine.
2. Unscrew the hose from the back of the washing machine. To prevent water from gushing out
due to the air pressure in the hose, cover the hose with a cloth.
3. Gently pull out the mesh filter from the end of the hose using a pair of pliers and rinse it under
water until clean. Also clean inside and outside the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Make sure the connections are watertight and turn on the tap.
REPAIRING A FROZEN WASHING MACHINE
If the temperature drops below freezing and your washing machine is frozen:
1.
2.
3.
4.
5.
Unplug the washing machine.
Pour warm water over the tap to loosen the water supply hose.
Remove the water supply hose and soak it in warm water.
Pour warm water into the washing machine drum and let it sit for 10 minutes.
Reconnect the water supply hose to the water tap and check if the water supply and drain
are operating normal.
STORING YOUR WASHING MACHINE
If you need to store your washing machine for an extended time, it’s better to drain and disconnect it.
Washing machines can be damaged if water is left in the hoses and internal components before storage.
1. Select the Quick Wash cycle and add bleach to the bleach compartment. Run your washing
machine through the cycle without a load.
2. Turn the water taps off and disconnect the inlet hoses.
3. Unplug your washing machine from the electrical outlet, and leave your washing machine
door open to allow air to circulate inside the tumbler.
If your washing machine has been stored in below-freezing temperatures, allow time for any
leftover water in your washing machine to thaw out before using it.
cleaning and maintaining your washing machine _35
WF1804WP-03025A-07_EN.indd Sec6:35
2013-02-15
5:40:42
troubleshooting and
information codes
CHECK THESE POINTS IF YOUR WASHING MACHINE...
PROBLEM
SOLUTION
Will not start
•
•
•
•
Make sure your washing machine is plugged in.
Make sure the door is firmly closed.
Make sure the water source tap(s) are turned on.
Make sure to press the Start/Pause button.
Has no water or not enough
water
•
•
•
•
Turn the water tap on fully.
Make sure the water source hose is not frozen.
Straighten the water intake hoses.
Clean the filter on the water intake hose.
Has detergent remains in
the detergent drawer after
the wash cycle is complete
•
Make sure your washing machine is running with sufficient water
pressure.
Make sure the detergent is added to the center of the detergent
drawer.
Vibrates or is too noisy
•
•
•
•
•
Make sure your washing machine is on a level surface. If the surface
is not level, adjust the washing machine feet to level the appliance.
Make sure that the shipping bolts are removed.
Make sure your washing machine is not touching any other object.
Make sure the laundry load is balanced.
The washing machine does
not drain and/or spin
•
•
Straighten the drain hose. Eliminate kinked hoses.
Make sure the debris filter is not clogged.
Door is locked shut or will
not open.
•
•
Make sure all the water in your drum is drained out.
Make sure the door lock light is off. Door lock light will off after
drained.
The drain pump generates
a strange noise.
•
Check if the drain pump is blocked by flocks or dirt . Clean the debris
filter to abate noise.
If the problem persists, contact your local Samsung Customer Service.
36_ troubleshooting and information codes
WF1804WP-03025A-07_EN.indd Sec7:36
2013-02-15
5:40:42
INFORMATION CODES
CODE SYMBOL
SOLUTION
dE
•
•
Make sure the door is firmly closed.
Make sure that laundry is not caught in the door.
4E
•
•
Make sure the source water tap is turned on.
Check the water pressure.
5E
•
•
Clean the debris filter.
Make sure the drainage hose is installed correctly.
•
The laundry load is unbalanced. Redistribute the load. If only one item
of clothing needs washing, such as a bathrobe or pair of denim, the
final spin result might be unsatisfactory and an “UE” error message
will be shown in the display window.
•
Call the after-sales service.
•
This occurs when too much foaming is detected. It is also displayed
while foaming is removed. When the removal is finished, the normal
cycle proceeds.(This is one of the normal operations. It is an error for
preventing non-sensing faults.)
•
If the voltage of the supplied power is instable, the washing machine
will be paused to protect its electric devices.
If the correct voltage is supplied, the cycle will resume automatically.
UE
cE/3E
Sud
Uc
•
04 TROUBLESHOOTING
When your washing machine malfunctions, you may see an information code on the display. If that
happens, check this table and try the suggested solution before calling Customer Service.
For any codes not listed above, or if the suggested solution doesn’t fix the problem, call your Samsung
Service Centre or local Samsung dealer.
troubleshooting and information codes _37
WF1804WP-03025A-07_EN.indd Sec7:37
2013-02-15
5:40:42
calibrating your washing
machine
CALIBRATION MODE
Samsung washing machine detects the laundry weight automatically. For more accurate weight detection,
please run Calibration Mode after the installation. Calibration mode is done by following the steps below.
1. Remove laundry or any contents in the machine and turn off the machine.
2. Press the Temp button and Delay End button simultaneously, and press the Power button
in addition.
Then the machine turns on.
3. Press the Start/Pause button to activate “Calibration Mode”.
4. The drum rotates clockwise and counterclockwise approximately for 3 minutes.
5. When “Calibration Mode” is finished, “End (En)” appears on the display, and the machine
automatically turns off. The washing machine is now ready for use.
38_ calibrating your washing machine
WF1804WP-03025A-07_EN.indd Sec7-1:38
2013-02-15
5:40:42
cycle chart
CYCLE CHART
( user option)
Max load(kg)
PROGRAM
Detergent
WF1704
WF1702
Pre-wash
Spin Speed(MAX) rpm
wash
Softener
Max Temp
(˚C)
WF1804
WF1704
WF1802
WF1702
Cotton
8.0
7.0

yes

95
1400
1200
Synthetics
3.0
3.0

yes

60
1200
1200
Denim
3.0
3.0

yes

60
800
800
Bedding
2.0
2.0

yes

40
800
800
Dark Garment
4.0
3.0

yes

40
1200
1200
Daily Wash
4.0
3.0

yes

60
1400
1200
Eco Drum Clean
-
-
-
yes
-
70
400
400
Super Eco Wash
4.0
3.0
-
yes

40
1200
1200
Outdoor Care
2.0
2.0
-
yes

40
1200
1200
Baby Care
4.0
3.0

yes

95
1400
1200
Wool
2.0
2.0
-
yes

40
800
800
Hand Wash
2.0
2.0
-
yes

40
400
400
PROGRAM
Eco Bubble
Delay End
Quick Wash
Easy Iron
Intensive
Soak
Cycle time
(min)
Cotton






130
Synthetics


-



91
Denim


-



80
Bedding


-



99
Dark Garment


-


-
79
Daily Wash


-

-

55
86
Eco Drum Clean
-

-
-
-
-
Super Eco Wash


-


-
94
Outdoor Care


-
-
-
-
79
Baby Care


-



133
Wool


-
-
-
-
35
Hand Wash


-
-
-
-
31
06 CYCLE CHART
WF1804
WF1802
1. A cycle with a prewash takes approx. 15 minutes longer.
2. The cycle duration data has been measured under the conditions specified in Standard IEC60456/
EN60456.
Please run Calibration Mode after the installation (see page 38).
3. Course time in individual homes may differ from the values given in the table due to variations in the
pressure and temperature of the water supply, the load and the type of laundry.
4. When the Intensive Wash function is selected, the cycle time is increased for each cycle.
cycle chart _39
WF1804WP-03025A-07_EN.indd Sec8:39
2013-02-15
5:40:42
appendix
FABRIC CARE CHART
The following symbols provide garment care directions. The care labels include four symbols in this order:
washing, bleaching, drying and ironing, and dry cleaning when necessary.
The use of symbols ensures consistency among garment manufacturers of domestic and imported items.
Follow the care label directions to maximize garment life and reduce laundering problems.
Resistant material
Can be ironed at 100 ˚C max
Delicate fabric
Do not iron
Item may be washed at 95 ˚C
Can be dry cleaned using any
solvent
Item may be washed at 60 ˚C
Dry clean with perchloride, lighter
fuel, pure alcohol or R113 only
Item may be washed at 40 ˚C
Dry clean with aviation fuel, pure
alcohol or R113 only
Item may be washed at 30 ˚C
Do not dry clean
Item may be hand washed
Dry flat
Dry clean only
Can be hung to dry
Can be bleached in cold water
Dry on clothes hanger
Do not bleach
Tumble dry, normal heat
Can be ironed at 200 ˚C max
Tumble dry, reduced heat
Can be ironed at 150 ˚C max
Do not tumble dry
PROTECTING THE ENVIRONMENT
•
•
•
•
This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance,
please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be
connected to a power source. Remove the door so that animals and small children cannot get trapped
inside the appliance.
Do not exceed the detergent quantities recommended in the detergent manu-facturers’ instructions.
Use stain removal products and bleaches before the wash cycle only when strictly necessary.
Save water and electricity by only washing full loads (the exact amount depends upon the program
used).
DECLARATION OF CONFORMITY
This appliance complies with European safety standards, EC directive 93/68 and EN Standard 60335.
40_ appendix
WF1804WP-03025A-07_EN.indd Sec9:40
2013-02-15
5:40:42
SHEET OF HOUSEHOLD WASHING MACHINES
According to Regulation (EU) No. 1061/2010
Samsung
Model Name
WF1804Y / WF1804W
Capacity
kg
WF1802Y / WF1802W
8
Energy Efficiency
A+++ (highest efficiency) to D (least efficient)
A+++
A+++
Energy Consumption
kWh/yr
195
195
Energy consumption (E_t.60) Cotton 60 ˚C at full load
kWh
1.14
1.14
Energy consumption (E_t.60.1/2) Cotton 60 ˚C with partial load
kWh
0.77
0.77
Energy consumption (E_t.40.1/2) Cotton 40 ˚C with partial load
kWh
0.57
0.57
Weighted power off-mode (P_o)
W
0.45
0.45
Weighted Power in left-on mode (P_l)
W
5
5
L/yr
10800
10800
B
B
rpm
1400
1200
53
53
Annual water consumption (AW_c)2)
07 APPENDIX
Annual Energy Consumption (AE_C)1)
Spin efficiency class3)
A (most efficient) to G (least efficient)
Maximum Spin Speed
Residual moisture
%
Cotton 60 ˚C and 40 ˚C + Intensive + Eco Bubble4)
Programs to which the information on the label and the sheet relate
Program duration of the standard program
Cotton 60 ˚C at full load
min
219
218
Cotton 60 ˚C for partial load
min
163
163
Cotton 40 ˚C with partial load
min
156
156
Weighted time in left-on mode
min
2
2
Wash
dB (A) re 1 pW
61
61
Spin
dB (A) re 1 pW
78
78
Airborne noise emissions
Dimensions
Unit dimensions
Height
mm
850
Width
mm
600
Depth5)
mm
600
Net weight
kg
70
Gross weight
kg
72
69
Package weight
kg
2
Water Pressure
kPa
50-800
71
Electrical connection
Voltage
V
220-240
Power consumption
W
2000-2400
Frequency
Hz
Supplier name
50
Samsung Electronics Co., Ltd.
1. Annual energy consumption is based on 220 standard washing cycles for cotton programs at 60 °C and
40 °C at full and partial load, and the consumption of off and left-on modes. Actual energy consumption
will depend on how the appliance is used.
2. Annual water consumption is based on 220 standard washing cycles for cotton programs at 60 °C and
40 °C at full and partial load. Actual water consumption will depend on how the appliance is used.
3. Spin extraction is very important when you use a clothes dryer to dry your clothes.
The energy for drying costs much higher than the energy for washing.
Wasing with the high spin saves more energy in drying your clothes in a clothes dryer.
4. The ‘standard cotton 60 °C program’ and ‘standard cotton 40 °C program’, which can be selected by adding
the Intensive option to the cotton 60 °C and cotton 40 °C program, are suitable to clean normally soiled cotton
laundry and they are the most efficient (concerning water and energy consumption) for this type of laundry.
The ‘Eco Bubble’ function always turns on in the ‘Cotton 60 ˚C course’ and ‘Cotton 40 ˚C course’.
Please run Calibration Mode after the installation (see page 38).
In these courses the actual water temperature may differ from the declared temperature.
5. Distance to the wall from the unit is not included in the depth dimension.
appendix _41
WF1804WP-03025A-07_EN.indd Sec9:41
2013-02-15
5:40:43
appendix
SHEET OF HOUSEHOLD WASHING MACHINES
According to Regulation (EU) No. 1061/2010
Samsung
WF1704Y / WF1704W
Model Name
Capacity
kg
WF1702Y / WF1702W
7
Energy Efficiency
A+++ (highest efficiency) to D (least efficient)
A+++
A+++
Energy Consumption
Annual Energy Consumption (AE_C)1)
kWh/yr
173
173
Energy consumption (E_t.60) Cotton 60 ˚C at full load
kWh
0.98
0.98
Energy consumption (E_t.60.1/2) Cotton 60 ˚C with partial load
kWh
0.72
0.72
Energy consumption (E_t.40.1/2) Cotton 40 ˚C with partial load
kWh
0.51
0.51
Weighted power off-mode (P_o)
W
0.45
0.45
Weighted Power in left-on mode (P_l)
W
5
5
L/yr
9400
9400
B
B
rpm
1400
1200
53
53
Annual water consumption (AW_c)2)
Spin efficiency class3)
A (most efficient) to G (least efficient)
Maximum Spin Speed
Residual moisture
%
Cotton 60 ˚C and 40 ˚C + Intensive + Eco Bubble4)
Programs to which the information on the label and the sheet relate
Program duration of the standard program
Cotton 60 ˚C at full load
min
229
228
Cotton 60 ˚C for partial load
min
128
131
Cotton 40 ˚C with partial load
min
123
126
Weighted time in left-on mode
min
2
2
Wash
dB (A) re 1 pW
61
61
Spin
dB (A) re 1 pW
78
78
Airborne noise emissions
Dimensions
Unit dimensions
850
Height
mm
Width
mm
600
Depth5)
mm
600
Net weight
kg
69
Gross weight
kg
71
68
Package weight
kg
2
Water Pressure
kPa
50-800
70
Electrical connection
Voltage
V
220-240
Power consumption
W
2000-2400
Frequency
Hz
Supplier name
50
Samsung Electronics Co., Ltd.
42_ appendix
WF1804WP-03025A-07_EN.indd Sec9:42
2013-02-15
5:40:44
1. Annual energy consumption is based on 220 standard washing cycles for cotton programs at 60 °C and
40 °C at full and partial load, and the consumption of off and left-on modes. Actual energy consumption
will depend on how the appliance is used.
2. Annual water consumption is based on 220 standard washing cycles for cotton programs at 60 °C and
40 °C at full and partial load. Actual water consumption will depend on how the appliance is used.
07 APPENDIX
3. Spin extraction is very important when you use a clothes dryer to dry your clothes.
The energy for drying costs much higher than the energy for washing.
Wasing with the high spin saves more energy in drying your clothes in a clothes dryer.
4. The ‘standard cotton 60 °C program’ and ‘standard cotton 40 °C program’, which can be selected by adding
the Intensive option to the cotton 60 °C and cotton 40 °C program, are suitable to clean normally soiled cotton
laundry and they are the most efficient (concerning water and energy consumption) for this type of laundry.
The ‘Eco Bubble’ function always turns on in the ‘Cotton 60 ˚C course’ and ‘Cotton 40 ˚C course’.
Please run Calibration Mode after the installation (see page 38).
In these courses the actual water temperature may differ from the declared temperature.
5. Distance to the wall from the unit is not included in the depth dimension.
appendix _43
WF1804WP-03025A-07_EN.indd Sec9:43
2013-02-15
5:40:44
QUESTIONS OR COMMENTS?
Country
CALL
OR VISIT US ONLINE AT
U.K
0330 SAMSUNG (7267864)
www.samsung.com
Code No. DC68-03025A-07_EN
WF1804WP-03025A-07_EN.indd Sec9:44
2013-02-15
5:40:44
Download PDF