Samsung | WF-B1261 | Samsung WF-B1261 Benutzerhandbuch

Washing Machine
Owner’s Instructions
WF- J1461(V/S/C), J1261(V/S/C),
J1061(V/S/C), J861(V/S/C)
WF- B1461(V/S/C), B1261(V/S/C),
B1061(V/S/C), B861(V/S/C)
WF- R1261(V/S/C), R1061(V/S/C),
R861(V/S/C)
WF- F1261(V/S/C), F1061(V/S/C),
F861(V/S/C)
WF-S1061(V/S/C), S861(V/S/C)
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Before using the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
. . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.3
.3
.3
.3
.3
.4
.4
.4
.5
Washing a Load of Laundry . . . . . . . . . . . . . . . . .
Overview of the control panel . . . . . . . . . . . . . . . . .
Washing for the first time . . . . . . . . . . . . . . . . . . . .
Putting detergent in the washing machine:. . . . . . . . .
Washing clothes manually. . . . . . . . . . . . . . . . . . . .
Selecting options . . . . . . . . . . . . . . . . . . . . . . . . .
Washing tips and hints . . . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.6
.6
.7
.7
.7
.8
.8
Maintaining the Washing Machine . . . . . . . . . . . .
Repairing a frozen washing machine . . . . . . . . . . . . .
Cleaning the exterior . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the debris filter. . . . . . . . . . . . . . . . . . . . .
Cleaning the water hose mesh filter. . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.9
.9
.9
.9
.9
Installing the Washing Machine .
Unpacking the Washing Machine .
Overview of the washing machine
Selecting a location . . . . . . . . . .
Adjusting the leveling feet . . . . .
Removing the shipping bolts . . . .
Connecting the water supply hose
Positioning the drain hose. . . . . .
Plugging in the machine . . . . . . .
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Problems and solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Understanding error messages. . . . . . . . . . . . . . . . . . . . . . . 10
Programme Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Appendix . . . . . . . . . . .
Fabric care chart . . . . . . . .
Electrical warnings . . . . . .
Protecting the environment.
Declaration of conformity . .
Specification . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 12
. 12
. 12
. 12
. 12
. 13
Register your product at
www.samsung.com/global/register
CODE NO : DC68-02350V-EN
WF-J1461-02350V_EN.indd
1
2006-08-02
ソタネト 3:19:33
Safety Precautions
Congratulations on your purchase of this Samsung washing machine. These Owner’s Instructions contain valuable
information on the installation, use, and care of this appliance. Please take the time to read these instructions so that
you can take full advantage of the washing machine’s features and enjoy this appliance for many years to come.
Before using the appliance
•
•
•
•
•
Packing materials can be dangerous to children; keep all packing material (plastic bags, polystyrene, etc.) well out of the
reach of children.
The appliance is designed for home use only.
Make sure that water and electrical connections are made by qualified technicians, observing the manufacturer’s
instructions (see “Installing the Washing Machine”) and local safety regulations.
All packaging and shipping bolts must be removed before the appliance is used. Serious damage may occur if they are not
removed. See “Removing the shipping bolts”.
Before washing clothes for the first time, you must run a complete cycle without clothes. See “Washing for the first time”.
Safety instructions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Before cleaning or carrying out maintenance, unplug the appliance from the electrical outlet or set the (On/Off ) button
to Off.
Make sure that the pockets of all clothing to be washed are empty.
Hard, sharp objects, such as coins, safety pins, nails, screws, or stones can cause extensive damage to the appliance.
Always unplug the appliance and turn off the water after use.
Before you open the door of the appliance, check that the water has drained. Do not open the door if you can still see water.
Pets and small children may climb into the appliance. Check the appliance before each use.
The glass door becomes very hot during the washing cycle. Keep children away from the appliance while it is in use.
Do not attempt to repair the appliance yourself. Repairs made by inexperienced or unqualified persons may cause injury
and/or make more serious repairs to the appliance necessary.
If the plug (power supply cord) is damaged, it must be replaced by the manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
This appliance should only be serviced by an authorized service center, and only genuine spare parts should be used.
This appliance is not intended for use by young children or infirm persons unless theyhave been adequately supervised by
a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that
they do not play with the appliance.
This appliance has to be connected to the plug endurable to proper power consumption.
This appliance has to be positioned so that the plug is accessible after installation.
Do not use processed water containing oil, cream or lotion, which is usually found in skin-care shops or massage clinics.
- Otherwise this will cause the packing to be deformed, which causes a malfunction or water leak.
A stainless washing tube does not usually rust. However if some metal such as a hair pin is left in the tube for an extended
time, the tube could rust.
- Do not leave water or bleach containing chlorine in the tube for an extended period of time.
- Do not regularly use or leave water containing iron in the tube for an extended period of time.
- If rust starts appearing on the surface of the tube, apply a cleansing agent (neutral) to the surface and use a sponge or
soft cloth to clean it. (Under no circumstances use a metal brush)
For washing machines with ventilation openings in the base, that a carpet must not obstruct the openings.
Use the new hose-sets and old hose-sets should not be reused.
This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes
at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for
details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should
not be mixed with other commercial wastes for disposal.
• SAVE THESE2INSTRUCTION
WF-J1461-02350V_EN.indd
2
2006-08-02
ソタネト 3:19:34
Installing the Washing Machine
Unpacking the Washing Machine
Unpack your washing machine and inspect it for shipping damage. Also make sure that you have received all of the
items shown below. If the washing machine was damaged during shipping or you do not have all of the items, contact
your Samsung dealer immediately.
Overview of the washing machine
Cover top
Control panel
Detergent drawer
Drain Hose
Door
Cold Water supply
hose
Debris filter
Bolt hole covers
Plug
Base cover
Adjustable feet
Selecting a location
Before you install the washing machine, select a location with the following characteristics:
• A hard, level surface (if the surface is uneven, see “Adjusting the leveling feet,” below)
• Away from direct sunlight.
• Adequate ventilation
• Room temperature that will not fall below 0˚C
• Away from sources of heat such as coal or gas Make sure that the washing machine does not stand on its power
cord. Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Cotton
Remaining Time
12:00
Check
o
C
rpm
Min
Delay Start
Synthetic
Delicate
Pre-wash
Wash
Wool
Rinse
Spin
Speedy
Eco
Fuzzy control
Temp
Spin
Delay Start
START
PAUSE
Power
Door open
Function
Adjusting the leveling feet
If the floor is uneven, adjust the feet (do not insert pieces of wood or any other objects under the feet):
1. Loosen the leg bolt by turning it with your hand until it is at the desired
height.
2. Tighten the locking nut by turning it with the wrench.
• Place the washer on a sturdy, flat surface.
If the washer is placed on an uneven or weak surface, noise or
vibration occurs.
(Only a 1 degrees angle is allowed.)
3
WF-J1461-02350V_EN.indd
3
2006-08-02
ソタネト 3:19:35
Installing the Washing Machine
Removing the shipping bolts
Before using the washing machine, you must remove all of the shipping bolts from the back of the unit. To remove the
bolts:
1. Loosen all bolts with the wrench before removing them.
2. Take each bolt head and pull it through the wide part of the hole.
Repeat for each bolt.
3. Fill the holes with the supplied plastic covers.
4. Keep the shipping bolts for future use.
Connecting the water supply hose
The water supply hose must be connected to the washing machine at one end and to the water faucet at the other.
Do not stretch the water supply hose. If the hose is too short and you do not wish to move the water faucet, replace the
hose with a longer, high pressure hose.
To connect the water supply hose:
1. Take the L-shaped arm fitting for the cold water supply hose and
connect to the cold water supply intake on the back of the machine.
Tighten by hand.
2. Connect the other end of the cold water supply hose to your sink’s cold
water faucet and tighten it by hand.
If necessary, you can reposition the water supply hose at the washing
machine end by loosening the fitting, rotating the hose, and
retightening the fitting.
Positioning the drain hose
The end of the drain hose may be positioned in three ways:
Over the edge of a sink
The drain hose must be placed at a height of between 60 and 90 cm. To
keep the drain hose spout bent, use the supplied plastic hose guide. Secure
the guide to the wall with a hook or to the faucet with a piece of string to
prevent the drain hose from moving.
ln a sink drain pipe branch
The drain pipe branch must be above the sink siphon so that the end of the
hose is at least 60 cm above the ground.
ln a drain pipe
Samsung recommends that you use a 65 cm high vertical pipe; it must be
no shorter than 60 cm and no longer than 90 cm.
4
WF-J1461-02350V_EN.indd
4
2006-08-02
ソタネト 3:19:36
Installing the Washing Machine
Plugging in the machine
You MUST ground the plug of the washing machine.
Check with a licensed electrician before using the machine to make sure it is properly grounded.
For U.K. Users.
GREEN AND
Wiring lnstructions
YELLOW
13 AMP FUSE
- WARNING THIS APPLIANCE MUST BE EARTHED.
This appliance must be earthed. In the event of an electrical short circuit, earthing
reduces the risk of electric shock providing an escape wire for the electric current.
The appliance is equipped with a mains lead which includes an earth wire for
connecting to the earth terminal of your mains plug.
The plug must be plugged into a socket that is properly installed and earthed.
* The wires in this mains lead are coloured in accordance with the following code:
• Green and yellow : Earth
• Blue : Neutral
• Brown : Live
• AS the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings indentifying the terminals in your plug,
proceed as follows.
• Connect the green and yellow wire to the terminal in the plug marked with the
letter E or the earth symbol ( ) or coloured green or green-and-yellow.
BLUE
BROWN
• Connect the blue wire to the terminal marked with the letter N or coloured
black.
WARNING
• Connect the brown wire to the terminal marked with the letter L or coloured
Ensure
that
the plug and
red.
power cord are not damaged
* Consult a qualified electrician or service technician if in doubt about any of
before use. If you have any
these instructions.
reason to remove the moulded
The manufacturer of this washing machine will not accept any liability for
plug from this appliance,
damage to persons or material for non observance of these requirements.
There are no user serviceable parts inside the washing machine and if the mains immediately remove the fuse
and dispose of the plug.
lead of this appliance is damaged, it must only be replaced by qualified service
Do not connect the plug to
personnel approved by the manufacturer because special tools are required.
a mains socket under any
circumstances as there is a
danger of electric shock.
CIRCUITS
Your washing machine should
be operated on a separate
circuit from other appliances.
Failure to do this may cause
the circuit breaker to trip or the
fuse to blow.
5
WF-J1461-02350V_EN.indd
5
2006-08-02
ソタネト 3:19:37
Washing a Load of Laundry
Overview of the control panel
A
 This is a general manual. The INLAY system may be different from that of the product you purchased.
For ( � ), see item 4 below to select the right specifications that match your product.
1. Display panel
Displays wash cycle and error messages.
During execution of the program, the program indicator blinks.
2. Program Select button
Press the button repeatedly to select one of the six available wash program.
Cotton(Baumwolle/weiss)  Colour(Baumwolle/bunt)  Synthetics(Synthetik)  Handwash(Handwäsche)
Wool(Wolle)  Quick(Schnellprogramm)  Rinse+Spin(Spülen+Schleudern)  Spin(Schleudern)
3. Temperature(Temperatur) selection button
Press the button repeatedly to cycle through the available water temperature options [cold water(Kaltwäsche),
30˚C, 40˚C , 60˚C and 95˚C].
When pressing this button during washing, you can see the selected temperature in the display panel.
4. Spin(Schleudern) selection button
Press the button repeatedly to cycle through the available spin speed options.
WF-J1461/B1461
Ohne Schleudern, 400, 800, 1400 rpm
WF-J1261/B1261/R1261/F1261
Ohne Schleudern, 400, 800, 1200 rpm
WF-J1061/B1061/R1061/F1061/S1061
Ohne Schleudern, 400, 800, 1000 rpm
WF-J861/B861/R861/F861/S861
Ohne Schleudern, 400, 600, 800 rpm
5. Option button
Press the button repeatedly to cycle through the available partial wash options
Rinse Hold(Spülstopp)  Rinse+ (Spülen+) Rinse Hold+Rinse+ (Spülstopp+Spülen+) Prewash(Vorwäsche) 
Prewash+Rinse Hold(Vorwäsche+Spülstopp)  Prewash+Rinse+(Vorwäsche+Spülen+)  Prewash+Rinse Hold+Rins
e+(Vorwäsche+Spülstopp+Spülen+)
Note: Prewash is only available when washing cotton(Baumwolle/weiss), synthetic(Synthetik) or
Colour(Baumwolle/bunt).
6. Delay Start selection button
Press this button repeatedly to rotate between the retarded start options available.
(from 3 Hours to 24 Hours, in 1 hour increments)
7. Start/Pause button
Press to pause and restart programs.
8.
(On/Off) button
Press once to turn the washing machine on, press again to turn the washing machine off.
If the washing machine power is left on for longer than 10 minutes without any buttons being touched, the power
automatically turns off.
What is the “Child Lock” function?
- If you press the “Child Lock” button[Spin(Schleudern)+Option button] longer than 2 sec during operation, this
function is selected.
- If once this function is selected, no change can be done until the end of laundry.
- Press the “Child Lock” button[Spin(Schleudern)+Option button] longer than 2 sec to cancel the function.
6
WF-J1461-02350V_EN.indd
6
2006-08-02
ソタネト 3:19:39
Washing a Load of Laundry
WM stops the current step of the cycle or does not proceed to the next step of
washing (indication of remain time on LED display may increase).
Your new washing machine is equipped with Fuzzy Logic system, which not only sets the optimum level of water and
other parameters of washing, but also controls the washing process as well as makes necessary corrections in order
to provide better washing results. In the above- mentioned matter, the Fuzzy Logic system has detected deviations in
washing cycle such as: high quantity of detergent at the end of the cycle, high vibration level while spinning, etc.You
can adjust existing wash programs, i.e. change wash temperature and spin speed. After detection of such abnormalities,
the washing machine is suspending the normal course of program in order to normalize these parameters and continue
the cycle. Fuzzy logic system makes 7 attempts to eliminate such deviations. If it is impossible to normalize the above
mentioned deviations by Fuzzy Logic system, you will see the corresponding indication on LED lamps. (see chapter
“Troubleshooting”) The operation of Washing machine that corresponds to above- mentioned scheme is considered to
be normal.
Washing for the first time
Before washing clothes for the first time, you must run a complete cycle without clothes. To do this:
1. Press the (On/Off ) button.
2. Pour a little detergent in the detergent drawer .
3. Turn on the water supply to the washing machine.
4. Press the Temperature button repeatedly until 40˚C is displayed.
5. Press the Start/Pause button.
• This will remove any water from the manufacturer’s test run remaining in the machine.
Putting detergent in the washing machine:
1.
2.
3.
4.
Pull out the detergent drawer.
Add laundry detergent into compartment .
Add softener into compartment (if you desire).
Add prewash detergent into compartment (if you desire).
Washing clothes manually
You can wash clothes manually without using the Fuzzy Logic feature. To do so:
1. Turn on the water at the water source sink.
2. Press the (On/Off ) button on the washing machine.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent in the detergent drawer .
7. Repeatedly press the Program button to select the cycle you prefer:
Cotton(Baumwolle/weiss), Colour(Baumwolle/bunt), Synthetics(Synthetik), and Quick(Schnellprogramm)...
8. Press the Spin button to select the spin speed [No Spin(Ohne Schleudern), 400, 800,...,No Spin(Ohne Schleudern),...]
9. Repeatedly press the Option button to select the cycle you prefer [Prewash(Vorwäsche), Rinse+(Spülen+), Rinse
hold(Spülstopp), ... ]
10. Press the Temperature button to select the temperature [cold water(Kaltwäsche) , 30˚C, 40˚C, 60˚C, 95˚C].
11. Press the Start/Pause button and the machine will begin the cycle.
When the cycle is finished:
1. Open the door.
Note: The door will not open until 3 minutes after the machine stops or the power turns off.
2. Remove laundry.
Note: The Slow rotation of drum is not fail of the machine after the last spin of Cotton(Baumwolle/weiss),
Colour(Baumwolle/bunt) or Quick(Schnellprogramm) course. That is a function to remove laundry easily.
7
WF-J1461-02350V_EN.indd
7
2006-08-02
ソタネト 3:19:42
Washing a Load of Laundry
Selecting options
Prewash(Vorwäsche)
Prewash is only available when washing cotton, Colour, synthetics, delicate clothes. To use prewash:
1. Load the prewash detergent into compartment of the detergent drawer.
2. Select “Cotton(Baumwolle/weiss)”, ”Colour(Baumwolle/bunt)” or ”Synthetic(Synthetik)” with the Program select
button.
3. Press the Option button until the “Prewash(Vorwäsche)” indicator lights up on the control panel.
4. Press Start/Pause to begin the cycle.
Rinse+ (Spülen+)
Your machine will run through an additional rinsing cycle.
The washing duration will be prolonged accordingly.
Rinse Hold(Spülstopp)
The laundry remains soaking in the final rinse water.
Before the laundry can be unloaded, the “Spin” program must be run.
Washing tips and hints
Sorting your laundry: Sort your laundry according to the following characteristics:
• Type of fabric care label symbol: Sort laundry into cottons, mixed fibers, synthetics, silks, wools and rayon.
• Colour: Divide whites and colours. Wash new, coloured items separately.
• Size: Placing items of different sizes in the same load will improve the washing action.
• Sensitivity: Wash delicate items separately, using the Wool wash program for pure new wool, curtains and silk
articles. Check the labels on the items you are washing or refer to the fabric care chart in the appendix.
Emptying pockets: Coins, safety pins and similar items can damage linen, the washing machine drum, and the water
tank.
Securing fasteners: Close zippers and fasten buttons or hooks; loose belts or ribbons should be tied together.
Determining load capacity: Do not overload the washing machine or your laundry may not wash properly. Use the
chart below to determine the load capacity for the type of laundry you are washing.
Load Capacity
Fabfic Type
WF-J1461/J1261/
J1061/J861
WF-B1461/B1261/
B1061/B861
WF-R1261/
R1061/R861
WF-F1261/
F1061/F861
WF-S1061/
F861
Cotton
(Baumwolle/weiss)
7.0 kg
6.0 kg
5.2 kg
4.5 kg
3.5 kg
Colour
(Baumwolle/bunt)
7.0 kg
6.0 kg
5.2 kg
4.5 kg
3.5 kg
Synthetics
(Synthetik)
3.0 kg
3.0 kg
2.5 kg
2.5 kg
2.0 kg
Wool (Wolle)
2.0 kg
2.0 kg
1.5 kg
1.5 kg
1.0 kg
Detergent tips: The type of detergent you should use is based on the type of fabric (Cotton, Synthetic, Wool items)
colour, wash temperature, degree and type of soiling. Always use “low suds” laundry soap, which is designed for
automatic washing machines.
When determining the detergent quantity, it’s necessary to consider recommendations of the detergent manufacturer,
indicated on the package, as well as weight, type of laundry, it’s fouling factor and water hardness in your region.
Note:
Keep detergents and additives in a safe, dry place out of the reach of children.
8
WF-J1461-02350V_EN.indd
8
2006-08-02
ソタネト 3:19:43
Maintaining the Washing Machine
Repairing a frozen washing machine
If the temperature drops below freezing and your washing machine is frozen:
1. Unplug the washing machine.
2. Pour warm water on the source faucet to loosen the water supply hose.
3. Remove the water supply hose and soak it in warm water.
4. Pour warm water into the washing machine drum and let it sit for 10 minutes.
5. Reconnect the water supply hose to the water faucet and check if the water supply and drain operations are normal.
Cleaning the exterior
1. Wipe the washing machine surfaces, including the control panel, with a soft cloth and non-abrasive household
detergents.
2. Use a soft cloth to dry the surfaces.
3. Do not pour water on the washing machine.
Cleaning the debris filter
Clean the debris filter 2 or 3 times a year.
1. Remove the base cover from the front of the washing machine.
2. Unscrew the filter cap and take it out.
3. Wash any dirt or other material from the filter.
Make sure the drain pump propeller behind the filter is not blocked.
Replace the filter cap.
4. Replace the base cover.
Cleaning the water hose mesh filter
You should clean the water hose mesh filter at least one time per year, or when the lamps on your machine flickers:
To do this:
1. Turn off the water source to the washing machine.
2. Unscrew the hose from the back of the washing machine.
3. With a pair of pliers, gently pull out the mesh filter from the end of the
hose and rinse it under water until clean.
Also clean the inside and outside of the threaded connector.
4. Push the filter back into place.
5. Screw the hose back onto the washing machine.
6. Turn on the faucet and make sure the connections are watertight.
9
WF-J1461-02350V_EN.indd
9
2006-08-02
ソタネト 3:19:44
Troubleshooting
Problems and solutions
The washing machine will not start
• Make sure the door is firmly closed.
• Make sure the washing machine is plugged in.
• Make sure the water source faucet is turned on.
• Make sure to press the Start/Pause button.
No water or insufficient water supply
• Make sure the water source faucet is turned on.
• Make sure the water source hose is not frozen.
• Make sure the water intake hose is not bent.
• Make sure the filter on the water intake hose is not clogged.
Detergent remains in the detergent drawer after the wash program is complete
• Make sure the washing machine is running with sufficient water pressure.
• Put the detergents in the inner parts of the detergent drawer(away from the outside edges).
Washing machine vibrates or is too noisy
• Make sure the washing machine is set on a level surface. If the surface is not level, adjust the washing machine feet
to level the appliance.
• Make sure that the shipping bolts are removed.
• Make sure the washing machine is not touching any other object.
• Make sure the laundry load is balanced.
The washing machine does not drain and/or spin
• Make sure the drain hose is not squashed or bent.
• Make sure the water hose mesh filter is not clogged.
Understanding error messages
Error displayed
Solution
dE
•
Close the door.
4E
•
•
Make sure the source water faucet is turned on.
Check the water pressure.
5E
•
•
Clean the debris filter.
Make sure the drainage hose is installed correctly.
UE
•
•
Laundry load is unbalanced; loosen any tangled laundry.
If only one item of clothing needs washing, such as a bathrobe or jeans, the final spin result
might be unsatisfactory and an “UE” error message will be shown in the display window.
LE
•
Check the end of the drain hose is too low. (Make sure the holder of drain hose in the back is
intact)
Check the end of the drain hose is submerged in water.
•
Before contacting After-Sales service:
1. Try to remedy the problem (See “Troubleshooting” on this page).
2. Restart the programme to see if the fault is repeated.
3. If the malfunction persists, call after-sales service and describe the problem.
10
WF-J1461-02350V_EN.indd
10
2006-08-02
ソタネト 3:19:44
Programme Chart
lect
( user option)
Detergent And
Additives
Spin Speed
(MAX) rpm
WFTemperaWFWFWFWFWFJ1061/
ture
J1461/ B1461/
WFWF- J1261/
PreR1261/ F1261/
Soft- (MAX) ˚C
B1061/
Wash
J1261/ B1261/
S1061/
J1461/ B1261/
R1061/ F1061/
ener
R1061/
wash
J1061/ B1061/
S861
B1461 R1261/
R861 F861
F1061/
J861
B861
F1261
S1061
Max load (kg)
PROGRAM
n.
silk
e water
.
se the
Cotton
(Baumwolle/weiss)
Colour
(Baumwolle/bunt)
Synthetics
(Synthetik)
Wool (Wolle)
WFJ861/
B861/
R861/
F861/
S861
Cycle
Delay
Time
start
(min)
7.0
6.0
5.2
4.5
3.5

yes

95
1400
1200
1000
800+

126
7.0
6.0
5.2
4.5
3.5

yes

60
1400
1200
1000
800+

98
3.0
3.0
2.5
2.5
2.0

yes

60
800
800
800
800

73
2.0
2.0
1.5
1.5
1.0
-
yes

40
400
400
400
400

42
Handwash
(Handwäsche)
2.0
2.0
1.5
1.5
1.0
-
yes

40
400
400
400
400

37
Quick
(Schnellprogramm)
3.0
3.0
2.0
2.0
1.5
-
yes

60
1400
1200
1000
800+

28
PROGRAM
Type of WASH
Cotton
(Baumwolle/weiss)
Averagely or lightly soiled cottons, bed linen, table linen, underwear, towels, shirts,etc.
Colour
(Baumwolle/bunt)
Averagely or lightly soiled cottons, bed linen, table linen, underwear, towels, shirts, etc.
.5 kg
Synthetics
(Synthetik)
Lightly or averagely soiled blouses, shirts, etc. Made of polyester(Diolen, Trevira),
polyamide(perlon, Nylon) or similar blends.
Handwash
(Handwäsche)
Very light wash course like hand wash.
.5 kg
Wool (Wolle)
Only machine washable wollens with pure new wool label.
Quick
(Schnellprogramm)
Lightly soiled cottons or linen blouses, shirts, dark coloured terry cloth, coloured linen
articles, jeans, etc.
S1061/
861
.0 kg
.0 kg
ems)
or
1. The programme duration data has been measured under the conditions specified in Standard IEC 456.
2. Consumption in individual homes may differ from the values given in the table due to variations in the pressure and
temperature of the water supply, the load and the type of laundry.
ufacturer,
on.
11
WF-J1461-02350V_EN.indd
11
2006-08-02
ソタネト 3:19:44
Appendix
Fabric care chart
Resistant material
Can be ironed at 100˚C max
Delicate fabric
Do not iron
Item may be washed at 95˚C
Can be dry cleaned using any solvent
Item may be washed at 60˚C
Dry clean with perchloride, lighter fuel, pure
alcohol or R113 only
Item may be washed at 40°C.
Dry clean with aviation fuel, pure alcohol or
R113 only
Item may be washed at 30°C.
Do not dry clean
Item may be hand washed
Dry flat
Dry clean only
Can be hung to dry
Can be bleached in cold water
Dry on clothes hanger
Do not bleach
Tumble dry, normal heat
Can be ironed at 200˚C max
Tumble dry, reduced heat
Can be ironed at 150˚C max
Do not tumble dry
Electrical warnings
To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind:
• Operate the appliance only from the type of power source indicated on the marking label. If you are not sure of the
type of power supplied to your home, consult your appliance dealer or local power company.
• Use only a grounded or polarized outlet. This plug will fit into the power outlet only one way. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug still doesn’t fit, contact your electrician to
replace your outlet.
• Protect the power cord. Power supply cords should be routed so that they are unlikely to be walked on or pinched
by items placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the unit.
• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock.
Protecting the environment
•
•
•
•
This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe
local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power
source. Remove the door so that animals and small children cannot get trapped inside the appliance.
Do not exceed the detergent quantities recommended in the detergent manu-facturers’ instructions.
Use stain removal products and bleaches before the wash cycle only when strictly necessary.
Save water and electricity by only washing full loads (the exact amount depends upon the program used).
Declaration of conformity
This appliance complies with European safety standards, EC directive 93/68 and EN Standard 60335.
12
WF-J1461-02350V_EN.indd
12
2006-08-02
ソタネト 3:19:51
Appendix
Specification
TYPE
FRONT LOADING WASHER
DIMENSION
WF-J1461/J1261/J1061/J861
WF-B1461/B1261/B1061/B861
WF-R1261/R1061/R861
WF-F1261/F1061/F861
WF-S1061/S861
W598mm X D600mm X H844mm
W598mm X D550mm X
H844mm
W598mm X D450mm
X H844mm
W598mm X D404mm
X H844mm
W598mm X
D340mm X
H844mm
WATER
PRESSURE
50 kPa ~ 800 kPa
WATER
VOLUME
60 l
54 l
49 l
48 l
43 l
NET WEIGHT
75 kg
75 kg
66 kg
62 kg
58 kg
WASH AND
SPIN CAPACITY
7 kg (DRY LAUNDRY)
6 kg (DRY LAUNDRY)
5.2 kg (DRY LAUNDRY)
4.5 kg (DRY LAUNDRY)
3.5 kg (DRY
LAUNDRY)
WF-B1461/B1261/B1061/
B861
WF-R1261/R1061/
R861
WF-F1261/F1061/F861
WF-S1061/S861
MODEL
POWER
CONSUMPTION
WF-J1461/J1261/J1061/J861
WASHING
AND
HEATING
SPIN
220 V
2000 W
240 V
WFMODEL
J1461
230V
2400 W
WFJ1261
WFJ1061
WFJ861
220 V
2000 W
220 V
1900 W
220 V
1800 W
220 V 1800 W
240 V
2400 W
240 V
2200 W
240 V
2100 W
240 V 2100 W
WFWFWFB1461 B1261 B1061
WFB861
WFWFF1261 F1061
WFF861
WFS1061
WFS861
34 W
MODEL
SPIN REVOLUTION
WFR861
700 W 360 W 320 W 270 W 580 W 530 W 500 W 430 W 550 W 500 W 430 W 270 W 230 W 180 W 250 W 200 W
PUMPING
PACKAGE Wt
WFWFR1261 R1061
WF-J1461/J1261/J1061/J861
WF-B1461/B1261/B1061/
B861
WF-R1261/R1061/
R861
WF-F1261/F1061/F861
WF-S1061/S861
PAPER
2.5 kg
2.5 kg
2.1 kg
1.9 kg
1.8 kg
PLASTIC
1.0 kg
1.0 kg
0.9 kg
0.8 kg
0.8 kg
MODEL
WF-J1461/B1461
WF-J1261/B1261/R1261/
F1261
WF-J1061/B1061/R1061/
F1061/S1061
WF-J861/B861/R861/F861/S861
rpm
1400
1200
1000
800
13
WF-J1461-02350V_EN.indd
13
2006-08-02
ソタネト 3:19:51
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
WF-J1461-02350V_EN.indd
14
2006-08-02
ソタネト 3:19:51
Download PDF