Samsung | TS240W | Samsung Samsung Thin Client Monitor TS240W LED Benutzerhandbuch

User Manual
SyncMaster
TS190W
TS220W
TS240W
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00169A-08
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2011 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
z
An administration fee may be charged if either
†
(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
†
(b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
z
The amount of such administration charge will be advised to you before any work or home visit is
carried out.
Before Using the Product
2
Before Using the Product
Icons used in this manual
The following images are for reference only. Real-life situations may
differ from what is shown in the images.
Symbols for safety precautions
A serious or fatal injury may result if instructions are not followed.
Warning
Caution
Personal injury or damage to properties may result if instructions are
not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product
3
Before Using the Product
Cleaning
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cable from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.
z
Do not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
!
z
Do not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cable to the product after cleaning the product.
6. Power on the monitor and computer.
!
Before Using the Product
4
Before Using the Product
Securing the Installation Space
z
Ensure some space around the product for ventilation. An internal temperature rise may cause fire
and damage the product. Be sure to allow the amount of space as shown below or greater when
installing the product.
The exterior may differ depending on the product.
10 cm
10 cm
10 cm
10 cm
10 cm
Precautions for storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
Be sure to contact Samsung Customer Service Center (95page) if the inside of the monitor needs
cleaning. (Service fee will be charged.)
Before Using the Product
5
Before Using the Product
Safety Precautions
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cable or plug, or a loose power socket.
z
An electric shock or fire may result.
Do not plug many products into the same power socket.
z
Otherwise, the socket may overheat and cause a fire.
Do not touch the power cable with wet hands.
z
Otherwise, an electric shock may result.
Insert the power cable all the way in so it is not loose.
z
An unstable connection may cause a fire.
!
Ensure you connect the power cable to a grounded power socket. (type 1
insulated devices only).
!
z
An electric shock or injury may result.
Do not bend or pull the power cable with force. Do not weigh the power cable
down with a heavy object.
z
A damaged power cord may cause an electric shock or fire.
Do not place the power cable or product near heat sources.
z
An electric shock or fire may result.
If the power cable pins or power outlet is covered with a foreign substance (dust,
etc.), wipe it off using a dry cloth.
!
z
Otherwise, a fire may result.
Before Using the Product
6
Before Using the Product
Caution
Do not unplug the power cable when the product is in use.
z
The product may become damaged by an electric shock.
Do not use the power cable for products other than authorized products supplied
by Samsung.
z
!
An electric shock or fire may result.
Keep the power socket where the power cable is connected unobstructed.
z
If any problem occurs in the product, unplug the power cable to completely
cut the power to the product.
!
Power to the product cannot be completely cut off with the power switch.
Hold the plug when disconnecting the power cable from the power socket.
z
An electric shock or fire may result.
!
Installation and Safety
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
z
Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a
bookshelf or wall closet.
z
Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached
by children.
!
z
Children may suffocate.
Before Using the Product
7
Before Using the Product
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.).
z
The product may fall and break or cause a personal injury.
z
Using the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
z
!
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
z
Otherwise, the product lifespan may be reduced, or a fire may result.
Do not install the product within the reach of young children.
z
The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not install
the product in a kitchen or near a kitchen counter.
Caution
Take care not to drop the product when moving it.
z
Otherwise, product failure or personal injury may result.
!
Do not set down the product on its front.
z
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.
z
The product may fall and break or cause a personal injury.
z
Install the product only on cabinets or shelves of the right size.
Before Using the Product
8
Before Using the Product
Put down the product carefully.
z
The product may fall and break or cause a personal injury.
!
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport or train
station where the product should operate continuously for an extended period of
time) may seriously affect its performance.
z
Be sure to consult Samsung Customer Service Center (95page) before
installation if you want to install the product at such a place.
Operation and Safety
Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or
modify the product on your own.
z
An electric shock or fire may result.
z
Contact Samsung Customer Service Center (95page) for repair.
Before moving the product, turn off the power switch and disconnect the power
cable and all other connected cables.
!
z
Otherwise, the power cord may be damaged and a fire or electric shock may
result.
If the product generates a strange noise, a burning smell, or smoke, remove the
power cable immediately and contact Samsung Customer Service Center
(95page).
!
z
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
z
The product may fall, and your child may become injured or seriously
harmed.
If the product falls or the exterior is damaged, power off the product, remove the
power cable, and contact Samsung Customer Service Center (95page).
z
Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.
z
The product or heavy objects may fall as children try to reach for the toy or
sweets resulting in a serious injury.
Before Using the Product
9
Before Using the Product
During a lightning or thunderstorm, power off the product and remove the power
cable.
z
!
An electric shock or fire may result.
Do not drop objects on the product or apply impact.
z
An electric shock or fire may result.
!
Do not move the product by pulling the power cable or any cable.
z
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
If a gas leakage is found, do not touch the product or power cable. Also, ventilate
the area immediately.
!
GAS
z
Sparks can cause an explosion or fire.
z
During a lightning or thunderstorm, do not touch the power cable or antenna
cable.
Do not lift or move the product by pulling the power cable or any cable.
z
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
Do not use or keep combustible spray or an inflammable substance near the
product.
!
z
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
z
Otherwise, a fire may result from an increased internal temperature.
Before Using the Product
10
Before Using the Product
100
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable
object (paper, match, etc.) into the vent or ports of the product.
z
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cable, and contact Samsung Customer Service
Center (95page).
z
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
z
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cable, and contact Samsung Customer Service
Center (95page).
z
Product failure, an electric shock or fire may result.
Caution
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.
z
!
If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
-_!
Disconnect the power cable from the power socket if you do not plan on using
the product for an extended period of time (vacation, etc.).
z
Otherwise, a fire may result from accumulated dust, overheating, an electric
shock, or electric leakage.
Use the product at the recommended resolution and frequency.
z
Your eyesight may deteriorate.
!
Do not put DC power adapters together.
z
Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
z
Otherwise, a fire may result.
Before Using the Product
11
Before Using the Product
Do not let water enter the DC power adapter or get the adapter wet.
z
An electric shock or fire may result.
z
Avoid using the product outdoors where it can be exposed to rain or snow.
z
Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
z
Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
!
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
!
Do not hold the monitor upside-down or move it by holding the stand.
z
The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
z
An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
z
Eye fatigue will be relieved.
!
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
!
Exercise caution when adjusting the product angle or stand height.
!
z
Otherwise, children's fingers or hands may become stuck and injured.
z
Tilting the product excessively may cause it to fall and result in personal
injury.
Before Using the Product
12
Before Using the Product
Do not place heavy objects on the product.
z
Product failure or personal injure may result.
Do not increase the volume too high when using headphones (earphones).
z
Sound particularly at a higher volume could potentially affect long-term
hearing.
Correct posture to use the product
Use the product in the correct posture as follows:
z
Straighten your back.
z
Allow a distance of 45 to 50cm between your eye and the screen, and look slightly
downward at the screen.
Keep your eyes directly in front of the screen.
z
Adjust the angle so light does not reflect on the screen.
z
Keep your forearms perpendicular to your upper arms and level with the back of
your hands.
z
Keep your elbows at about a right angle.
z
Adjust the height of the product so you can keep your knees bent at 90 degrees or
more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product
13
Table Of Contents
BEFORE USING THE
PRODUCT
PREPARATIONS
USING "WINDOWS
EMBEDDED STANDARD 7"
2
Copyright
3
3
Icons used in this manual
Symbols for safety precautions
4
Cleaning
4
5
5
Cleaning
Securing the Installation Space
Precautions for storage
6
Safety Precautions
6
7
9
Electricity and Safety
Installation and Safety
Operation and Safety
13
Correct posture to use the product
19
Checking the Contents
19
20
Removing the Packaging
Checking the Components
21
Parts
21
23
24
Frontal Buttons
Reverse Side
Right Side View
25
Installation
25
26
26
27
28
Attaching the Stand
Adjusting the Product Tilt and Height
Rotating the Monitor
Installing a Wall-mount Kit or Desktop Stand
Anti-theft Lock
29
What is "Windows Embedded Standard 7"
Client?
Table Of Contents
14
Table Of Contents
CONNECTING AND USING
A SOURCE DEVICE
SCREEN SETUP
30
Connection to Use "Windows Embedded
Standard 7"
30
30
31
31
32
32
Connection Using the D-SUB Cable (Analogue
Type)
Connection Using the DVI Cable
Connecting to Headphones or Speakers
LAN Connection
Connecting a Microphone
Connecting USB Devices
33
Using "Windows Embedded Standard 7"
33
33
34
41
42
Logon
"Windows Embedded Standard 7" Desktop
Programs
Configuring Utilities
Recover the System
43
Before Connecting
43
Pre-connection Checkpoints
44
Connecting and Using a PC
44
46
47
48
Connecting to a PC
Driver Installation
Setting Optimum Resolution
Changing the Resolution Using a PC
51
Connecting the Power
52
Brightness
52
Configuring Brightness
53
Contrast
53
Configuring Contrast
54
Sharpness
54
Configuring Sharpness
55
SAMSUNG MAGIC Bright
55
Configuring SAMSUNG MAGIC Bright
Table Of Contents
15
Table Of Contents
CONFIGURING TINT
RESIZING OR
RELOCATING THE
SCREEN
SETUP AND RESET
56
SAMSUNG MAGIC Angle
56
Configuring SAMSUNG MAGIC Angle
57
Coarse
57
Adjusting Coarse
58
Fine
58
Adjusting Fine
59
SAMSUNG MAGIC Color
59
Configuring SAMSUNG MAGIC Color
60
Red
60
Configuring Red
61
Green
61
Configuring Green
62
Blue
62
Configuring Blue
63
Color Tone
63
Configuring the Color Tone Settings
64
Gamma
64
Configuring Gamma
65
H-Position & V-Position
65
Configuring H-Position & V-Position
66
Image Size
66
Changing the Image Size
67
Menu H-Position & Menu V-Position
67
Configuring Menu H-Position & Menu VPosition
68
Reset
68
Initializing Settings (Reset)
Table Of Contents
16
Table Of Contents
INFORMATION MENU AND
OTHERS
INSTALLING THE
SOFTWARE
69
Language
69
Changing the Language
70
Off Timer On/Off
70
Configuring Off Timer On/Off
71
Off Timer Setting
71
Configuring Off Timer Setting
72
PC/AV Mode
72
Configuring PC/AV Mode
73
Key Repeat Time
73
Configuring Key Repeat Time
74
Customized Key
74
Configuring Customized Key
75
Auto Source
75
Configuring Auto Source
76
Display Time
76
Configuring Display Time
77
Menu Transparency
77
Changing Menu Transparency
78
INFORMATION
78
Displaying INFORMATION
78
Configuring Brightness in the Initial
Screen
79
Natural Color
79
What is Natural Color?
80
MultiScreen
80
81
Installing the Software
Removing the Software
82
MagicRMS Pro
82
About MagicRMS Pro
Table Of Contents
17
Table Of Contents
TROUBLESHOOTING
GUIDE
SPECIFICATIONS
APPENDIX
83
Requirements Before Contacting
Samsung Customer Service Center
83
83
83
Testing the Product
Checking the Resolution and Frequency
Check the following.
86
Q&A
88
General
90
PowerSaver
91
Standard Signal Mode Table
95
Contact SAMSUNG WORLDWIDE
100
Correct Disposal
100
100
Correct Disposal of This Product (Waste
Electrical & Electronic Equipment)
Correct disposal of batteries in this product
101
Terminology
INDEX
Table Of Contents
18
1
1.1
Preparations
Checking the Contents
1.1.1 Removing the Packaging
1
Open the packaging box. Be careful not to damage the product when you open the packaging with
a sharp instrument.
2
Remove the styrofoam from the product.
3
Check the components and remove the styrofoam and plastic bag.
4
z
The appearance of actual components may differ from the image shown.
z
This image is for reference only.
Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations
19
1
Preparations
1.1.2 Checking the Components
z
Contact the dealer from whom you purchased the product if any item is missing.
z
The appearance of the components and items sold separately may differ from the image shown.
Components
Quick setup guide
Warranty card
User manual
(Not available in all locations)
Power cable
DC power adapter
Power extension cables
(DC 14V)
Stand base
DVI cable
z
Components may vary depending on the country.
z
The stand base supplied with this product contains a circuit board. Care should be taken when
handling the base.
Items sold separately
The following items can be purchased at your nearest retailer.
HDMI-DVI cable
D-SUB cable
1 Preparations
20
1
1.2
Preparations
Parts
1.2.1 Frontal Buttons
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Icons
Description
z
Open or close the onscreen display (OSD) menu, or return to the
parent menu.
z
OSD control lock: Maintain the current settings, or lock the OSD
control to prevent unintended changes to settings.
To lock the OSD control, press the MENU button [
] for five
seconds.
To unlock the locked OSD control, press the MENU button [
]
for more than five seconds.
If the OSD control is locked,
z
Brightness and Contrast can be adjusted, and INFORMATION
can be viewed.
z
The Customized Key function can be used by pressing the [
]
button. (The Customized Key function specified before the OSD
control was locked is available even when the OSD control is
locked.)
1 Preparations
21
1
Preparations
Icons
Description
Configure Customized Key and press [
be enabled.
SAMSUNG
MAGICAngle
]. The following options will
SAMSUNG
- MAGIC
Bright - Image Size
To configure Customized Key, go to SETUP&RESET
→
Customized Key and select the mode you want.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Adjust the screen brightness.
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will
change the input source (Digital/Analog). If you power on the product or
change the input source by pressing the [
] button, a message that
shows the changed input source will appear at the top left corner of the
screen.
Press the [AUTO] button to automatically adjust the screen settings.
AUTO
z
Available only in Analog mode.
z
Changing the resolution in Display Properties will activate the
Auto Adjustment function.
Turn the screen on or off.
The power indicator will be lit when the product is operating normally.
z
Refer to "11.2 PowerSaver"for details about the power-saving
function.
z
To reduce power consumption, it is best to remove the power
cable when you will not be using the product for an extended
period of time.
(Power lamp)
Power on or off the product.
1 Preparations
22
1
Preparations
1.2.2 Reverse Side
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
LAN
AUDIO OUT
RGB OUT
Port
DVI OUT
DC 14V OUT DC 14V IN
Description
Connect to a USB device.
Connect to a network using the LAN cable.
Connect to an audio output device such as headphones.
Connect to the monitor using the D-SUB cable.
Connect to the monitor using the DVI cable.
[DC 14V OUT]
[DC 14V IN]
Connect to the
extension cable.
[DC 14V] port on the monitor using the power
Connect to the DC power adapter.
1 Preparations
23
1
Preparations
1.2.3 Right Side View
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
DVI IN
RGB IN
DC 14V
Port
MIC
Description
Connect to a PC or the stand base using the DVI cable.
Connect to a PC or the stand base using the D-SUB cable.
Connect to
[DC 14V OUT] on the stand base using a power
extension cable.
[
]
[MIC]
Connect to an audio output device such as headphones.
Connect to a microphone.
Connect to a USB device.
1 Preparations
24
1
1.3
Preparations
Installation
1.3.1 Attaching the Stand
Place a protective cloth or
cushion on a flat surface. Next,
place the product with the face
down on top of the cloth or
cushion.
Insert the stand base into the
stand in the direction of the
arrow.
Do not remove the fixing pin until
you are finished attaching the
stand.
Fasten the screw tightly (using a
screwdriver or coin) into the
bottom of the stand base.
After installing the stand, place
the product upright.
You can remove the fixing pin
and adjust the stand now.
- Caution
Do not hold the product upside
down only by the stand.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
1 Preparations
25
1
Preparations
1.3.2 Adjusting the Product Tilt and Height
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
z
To adjust the height, remove the fixing pin.
z
The monitor tilt and height can be adjusted.
z
Hold the top center of the product and adjust the height carefully.
1.3.3 Rotating the Monitor
You can rotate your monitor as shown below.
z
Be sure to fully extend the stand before rotating the monitor.
z
If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the
floor and get damaged.
z
Do not rotate the monitor counterclockwise. The monitor may get damaged.
1 Preparations
26
1
Preparations
1.3.4 Installing a Wall-mount Kit or Desktop Stand
Before Installation
Power the product off and remove the power cable from the power socket.
Place a protective cloth or
cushion on a flat surface. Next,
place the product with the face
down on top of the cloth or
cushion.
Unfasten the screw from the
back of the product.
Lift and detach the stand.
Installing a Wall-mount Kit or Desktop Stand
2
1
A
3
4
B
A Attach the wall-mount kit or desktop stand here
B Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
1 Preparations
27
1
Preparations
Notes
z
Using a screw longer than the standard length can damage the internal components of the
product.
z
The length of screws required for a wall mount that does not comply with the VESA standards may
vary depending on the specifications.
z
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws
or attaching the wall-mount kit or desktop stand using excessive force.
z
Samsung shall not be held liable for any product damage or personal injury caused by using a wallmount kit other than the one specified or from an attempt to install the wall-mount kit on your own.
z
To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm
or farther away from the wall.
z
Be sure to use a wall-mount kit that complies with the standards.
1.3.5 Anti-theft Lock
An anti-theft lock allows you to use the product securely even in public places. The locking device shape
and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft
locking device for details. The lock device is sold separately.
To lock an anti-theft locking device:
1
2
3
4
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
Put one end of the cable through the loop on the other end.
Insert the locking device into the anti-theft lock slot at the back of the product.
Lock the locking device.
z
An anti-theft locking device can be purchased separately.
z
Refer to the user guide provided with your anti-theft locking device for details.
z
Anti-theft locking devices can be purchased at electronics retailers or online.
1 Preparations
28
2
2.1
Using "Windows Embedded Standard 7"
What is "Windows Embedded Standard 7" Client?
The Microsoft Windows Embedded Standard 7 (WES7) client uses the Microsoft Windows
Embedded Standard 2011 OS. When the WES client is connected to a server where Citrix
XenDesktop, VMWare View Client, or Microsoft Remote Desktop Connection service is available,
the keyboard, mouse, audio/video, and display data will be forwarded to the client through the network
between the client and server.
Connectable Servers
z
A Citrix XenDesktop Server
†
Microsoft Windows 2000/2003/2008 Server where the Terminal Service and Citrix
XenServer are installed
z
A VMWare View Client Server
†
Microsoft Windows 2000/2003/2008 Server where the Terminal Service and VMWare
Server are installed
z
A Microsoft RDP (Remote Desktop Protocol) Server
†
Microsoft Windows 2000/2003/2008 Server where the Terminal Services are installed
†
Microsoft Windows 7 Professional
This manual describes the functions provided by the WES Client. However, it does not explain general
functionalities of WES. For more general information on Windows 7, refer to Windows 7 Help provided
by Microsoft.
2 Using "Windows Embedded Standard 7"
29
2
2.2
Using "Windows Embedded Standard 7"
Connection to Use "Windows Embedded Standard 7"
2.2.1 Connection Using the D-SUB Cable (Analogue Type)
RGB IN
1
RGB OUT
Connect the D-SUB cable to [RGB IN] on the back of the monitor and [RGB OUT] on the stand
base.
2
Connect the DC power adapter to the product and a power outlet. Next, turn on the power switch
on the stand base.
(For details, refer to "3.3 Connecting the Power".)
3
Press [
] to change the input source to Analog.
2.2.2 Connection Using the DVI Cable
DVI IN
1
2
DVI OUT
Connect the DVI cable to [DVI IN] on the back of the monitor and [DVI OUT] on the stand base.
Connect the DC power adapter to the product and a power outlet. Next, turn on the power switch
on the stand base.
(For details, refer to "3.3 Connecting the Power".)
3
Press [
] to change the input source to Digital.
2 Using "Windows Embedded Standard 7"
30
2
Using "Windows Embedded Standard 7"
2.2.3 Connecting to Headphones or Speakers
AUDIO OUT
1
Connect an audio output device (headphones or speakers) to [AUDIO OUT] on the back or [
] on
the right side of the stand base.
2.2.4 LAN Connection
LAN
1
Connect the LAN cable to [LAN] on the back of the stand base.
It is not supported when the network speed is below or equal to 10Mbps.
2 Using "Windows Embedded Standard 7"
31
2
Using "Windows Embedded Standard 7"
2.2.5 Connecting a Microphone
MIC
1
Connect the microphone to [MIC] on the right side of the stand base.
2.2.6 Connecting USB Devices
1
Connect USB devices (keyboard, mouse, etc.) to [ ] on the back or right side of the stand base.
2 Using "Windows Embedded Standard 7"
32
2
2.3
Using "Windows Embedded Standard 7"
Using "Windows Embedded Standard 7"
2.3.1 Logon
When the client starts, you can logon to the server by entering your username and password. The default
account IDs are ‘Administrator’ and ‘User’. The corresponding passwords are not set.
2.3.2 "Windows Embedded Standard 7" Desktop
User
When you log in, the User Desktop appears. The default icons that appear on the User Desktop are
Recycle Bin, Computer, Citrix Online Plug in, VMWare View Client, Remote Desktop Connection
and Internet Explorer. You can also run this connection from the Start menu. The audio volume icon
and system time are displayed on the User Taskbar.
When logged on as a user, there are many restrictions that protect the system from incorrect user
actions. You cannot access the system drives and there are restrictions on configuring properties for
them. To configure the client’s advanced and detailed settings, log on as an administrator.
Administrator
If you logon as Administrator, the Administrator Desktop appears. The default icons that appear on the
Administrator Desktop are Recycle Bin, Computer, Citrix Online Plug in, VMWare View Client,
Remote Desktop Connection and Internet Explorer. You can also run the Citrix Online Plug in,
VMWare View Client, Remote Desktop Connection, and Internet Explorer from the Start menu. The
audio volume icon, Enhanced Write Filter status icon, and system time are displayed on the
Administrator Taskbar. The Administrator privilege is required for adding and removing programs.
Log off, Restart, Shut down
z
To log off the current session, shut down or restart your client, use the Start menu. [Start
Shut
down]. The Shut Down Windows dialog box is displayed. To shut down the client immediately,
select [Start
Shut down]. To select Log off, Restart, etc., move the mouse over the
▶ icon
next to [Shut down]. Alternatively, you can perform Log off or Shut down using the Windows
Security Dialog box by pressing [Ctrl + Alt + Del]. If ‘Force Auto Log on’ is activated, you will be
immediately logged on after each log off.
z
The Client Log off, Restart and Shut down take effect on the operations of the EWF (Enhanced
Write Filter). To keep the changed system configuration, you must save a cache for the current
system session into flash memory. Failing to do so will cause the changed configuration to be lost
when the client is shutdown or restarted. (In the case of logging off, the configuration is remembered
when loggin in again.) For more information on the Enhanced Write Filter, refer to the Program
Help.
2 Using "Windows Embedded Standard 7"
33
2
Using "Windows Embedded Standard 7"
2.3.3 Programs
Remote Desktop Connection
You can control a running terminal server or another computer (Windows 95 or later) remotely through a
remote desktop connection.
z
Remote Desktop
Windows 7 Professional or Windows 2000/2003/2008 Server must be installed on the
†
computer to be controlled remotely. This computer is called a host.
A remote computer running on an operating system later than Windows 95 is required. This
†
remote computer is called a client. The client software for the remote desktop connection must be
installed on the client.
You must also be connected to the Internet. A broadband Internet connection is good for high
†
performance. However, because the remote desktop transmits a minimum set of data including
the display data and keyboard data to control the host remotely, a broadband Internet
connection is not required. You can run a remote desktop on a low bandwidth Internet
connection.
When running a remote desktop on Windows 7 Professional, you cannot use the operating
system of your computer.
z
Enabling Your Computer as the Host
You must enable the Remote Desktop feature to control it from another computer. You must be
logged on as an administrator or a member of the Administrators group to enable Remote
Desktop on your computer. Follow these steps:
1
2
Open the System folder in the Control Panel.
Go to [Start
Control Panel
System and Security
System], and click Remote
settings.
3
If you want to block other PCs from accessing your PC using Remote Desktop or
RemoteApp, select “Don't allow connections to this computer”.
z
To allow a remote PC to access your PC using any version of Remote Desktop or RemoteApp,
select "Allow connections from computers running any version of Remote Desktop (less
secure)". This option is suitable if you do not know the Remote Desktop Connection version
being used on other PCs. Note that this option is less secure than the next option (option 3).
2 Using "Windows Embedded Standard 7"
34
2
Using "Windows Embedded Standard 7"
z
z
To allow a remote PC to access your PC using a Remote Desktop or RemoteApp version
requiring a networklevel authentication, select "All Remote Assistance connections to this
computer" to run Remote Desktop using network-level authentication.
Start a Remote Desktop Session on the Client
Once you have enabled your host computer to allow remote connections and installed the client
software on a Windowsbased client computer, you are ready to start a Remote Desktop session.
You must first establish a virtual private network connection or remote access service connection
from your client computer to your host computer. To connect to another remote desktop, follow the
instructions below.
1
Go to [Start
All Programs
Accessories
Remote Desktop Connection] or double-
click the Remote Desktop Connection icon to open Remote Desktop Connection.
2
Enter the host computer name. You can configure detailed settings by clicking the Options
button.
2 Using "Windows Embedded Standard 7"
35
2
Using "Windows Embedded Standard 7"
3
Options
- General : Enter in the login information for the host computer. To log in automatically, enter in
the user name and password.
- Display : The Remote Desktop Connection sends and receives compressed screen data. If
you set the resolution and color quality to the high option, the speed may become slow.
2 Using "Windows Embedded Standard 7"
36
2
Using "Windows Embedded Standard 7"
- Local Resource : Specify whether to use the hard disks and ports.
- Programs : Select an application and specify the folder where you want to run the application
when a connection is established to the host PC.
2 Using "Windows Embedded Standard 7"
37
2
Using "Windows Embedded Standard 7"
- Experience : Specify the connection speed and the menu items you want to use on the
remote PC connected. The settings specified will be shared with the host PC.
- Advanced : Protect your personal information when a connection is established.
4
5
Click Connect. The Log On to Windows dialog box appears.
In the “Log On to Windows” dialog box, type your username, password, and domain (if
required), and then click OK. The Remote Desktop window will open and you will see the
desktop settings, files, and programs that are on the host computer.
For more information on Remote Desktop Connections, visit the Microsoft web site.
2 Using "Windows Embedded Standard 7"
38
2
Using "Windows Embedded Standard 7"
Internet Explorer
A WES Client includes Internet Explorer. This program is permitted for all users. Microsoft website.
For more information on Internet Explorer, visit the Microsoft website.
Enhanced Write Filter (EWF)
Enhanced Write Filter (EWF) protects a flash volume from write access and consequently, preserves
the durability of the flash device. EWF provides read and write access through a cache to the client
instead of allowing direct access to a flash volume.
If EWF is activated, data is not stored to the flash. The data stored in the cache is only effective while the
client is operating. The cached data will be lost when restarting or shutting down your client. Therefore, to
store the data written to the registry, favorites and cookie folders, etc., the content stored in the cache
should be transferred to the flash. An error message is displayed when it is not possible to write to the
cache due to a lack of memory. If this message is displayed, you have to deactivate EWF to flush the
EWF cache. The user can double-click the EWF icon on the tray at the bottom right of the screen to call
the EWF Manager. A user can also change the EWF configuration by entering EWF management
commands at the command prompt. This task requires the Administrator privilege.
z
Enable write filter and restart the system.
If the EWF is disabled, enable it. If this item is selected, the cache is flushed and the EWF is enabled.
After restarting your computer, the configurations and file system information for the client are written
to a cache. You can also perform this operation by entering “ewfmgr.exe c: -enable” at the
command prompt and restarting your computer.
z
Disable write filter and restart the systems.
This item is activated when the EWF is running. If this item is selected, the current states of the client
(saved in a cache) are saved to a flash volume and the EWF is disabled. After restarting your
computer, the configurations and file system information for the client are written to a flash volume.
2 Using "Windows Embedded Standard 7"
39
2
Using "Windows Embedded Standard 7"
You can also perform this operation by entering “ewfmgr.exe c: -commitanddisable” at the
command prompt and restarting your computer.
z
Commit changes to disk.
This item is activated when the EWF is running. If this item is selected, the current states of the client
(saved in a cache) are saved to a flash volume. However, the state of EWF will not be changed. You
can also perform this operation by entering “ewfmgr.exe c: -commit” at the command prompt.
You can view the configurations for the protected volumes by entering “ewfmgr.exe c:” at the
command prompt.
File-Based Write Filter (FBWF)
The File-Based Write Filter (FBWF) protects the memory of the client from being overwritten by any
unauthorized user. By restricting excessive writing into the memory, the FBWF allows you to use the
client for a long time. If you request I/O, the FBWF has the client perform its operations using the cache
instead of the memory so that the memory can be protected.
The data saved in the cache is preserved while the client operates normally. It is removed when it is
restarted or exited. To save the changes, you should write the relevant file onto the disk using the commit
command. If you don’t know which file is changed, disable the FBWF, change it, and enable it again.
You can control the FBWF using the various options of the command at a command prompt.
z
FBWF Configuration
†
Current FBWF status : Displays the current status of the FBWF (Enabled or Disabled).
†
Boot command : Displays the FBWF command that will be performed at the next boot-up.
†
RAM Used by FBEF : Displays the size of the RAM the FBWF is using. If the current status is
set to "Disabled", the used memory is displayed as 0 KB.
†
z
Threshold : Displays the maximum size of the RAM that the FBWF can use.
FBWF Command
†
Enable the FBWF and reboot the system : Enables the disabled FBWF and restarts the
client. If the client is not restarted, only the boot command is changed to BWF_ENABLE and the
current status is not changed.
†
Disable the FBWF and reboot the system : Disables the enabled FBWF and restarts the
client. If the client is not restarted, only the boot command is changed to FBWF_DISABLE and
the current status is not changed.
†
Commit files : Even if the disks are protected by the FBWF, you can add or delete the files you
want to save on them. To write the changes onto the disk, click the [Write the changes to the
disk] button.
z
Session Status
†
Current session : Displays the volumes being protected by the FBWF and a list of the folders
and files on those volumes that are excepted from protection by the FBWF.
2 Using "Windows Embedded Standard 7"
40
2
Using "Windows Embedded Standard 7"
†
Next session : Select the volumes that will be protected by the FBWF when the client is
booted up next time. Also, select the folders and files that you want to except from protection
by the FBWF.
Windows Media Player
The WES Client includes Windows Media Player 12. With Windows Media Player, you can play audio
and video files on a website.
2.3.4 Configuring Utilities
Local Drive
z
C Drive
The C drive is used for the system. The client OS will not operate if space available on the system
drive is not sufficient. Ensure sufficient space is available on the C drive. EWF can help maintain
available space by preventing the C drive being written to directly.
z
Saving Files
Your client uses a fixed size of flash memory. Therefore, it is better to save files to the server rather than to your client.
Mapping a Network Drive
The Administrator can map a folder to a network drive. To keep the mapping information after restarting
the client, take note of these directions carefully.
z
Select the Reconnect at logon checkbox in the Map Network Drive dialog box.
z
If the EWF or FBWF is enabled, the changes are saved on the disk.
2 Using "Windows Embedded Standard 7"
41
2
Using "Windows Embedded Standard 7"
2.3.5 Recover the System
Overview
The WES Client provides a recovery function which allows you to revert to a backed up system when
encountering a serious problem. You can back up an OS image which is working normally to USB
memory or the PXE server. You can revert to a backed up image when your client has one of these
problems:
z
When a system file is deleted accidentally or is corrupted
z
When the client computer is unstable or there is a problem with a device driver
z
When problems occur, after installing a new program or device
z
When the client computer is infected with a virus
z
When Windows Embedded Standard fails to start When a system file is deleted accidentally or is
corrupted
How to Recover the System
z
Recovery Using USB Memory
By following these steps, you can save all necessary files to USB memory, and boot up with the
backed up system on the USB memory and recover the system.
1
2
Perform system formatting for your USB memory in order to make it bootable.
Save the Windows Embedded Standard image and the Backup/Recovery Utility which will be
recovered later to your USB memory.
3
4
Boot up with the USB memory.
Recover the system using the Windows Embedded Standard image and the Backup/
Recovery Utility in the USB memory.
z
Recovery Using Network Booting
This method is provided through the PXE (Preboot eXecution Environment) server. The PXE sever
provides a client/server interface based on TCP/IP, DHCP, and TFTP. It allows an administrator at a
remote location to configure and boot the operating system onto a client over a network.
†
Implement a PXE server.
†
Save the Windows Embedded Standard image and the Backup/Recovery Utility which will be
recovered later onto the PXE server.
†
Boot the client via the network.
†
Recover the system using the Windows Embedded Standard image and the Backup/Recovery
Utility saved on the PXE server via the network.
For more information, refer to the PXE Server User Manual.
2 Using "Windows Embedded Standard 7"
42
3
3.1
Connecting and Using a Source Device
Before Connecting
3.1.1 Pre-connection Checkpoints
z
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
z
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
z
Check the types of ports at the back of the product you want to connect.
3 Connecting and Using a Source Device
43
3
3.2
Connecting and Using a Source Device
Connecting and Using a PC
3.2.1 Connecting to a PC
z
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
Connection Using the D-SUB Cable (Analogue Type)
RGB IN
1
Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the
PC.
2
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC.
(For details, refer to "3.3 Connecting the Power".)
3
Press [
] to change the input source to Analog.
Audio is not available if the PC and product are connected via the [D-SUB] port.
Connection Using the DVI Cable
DVI IN
1
2
Connect the DVI cable to the [DVI IN] port on the back of the product and the DVI port on the PC.
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC.
(For details, refer to "3.3 Connecting the Power".)
3
Press [
] to change the input source to Digital.
Audio is not available if the PC and product are connected via the [DVI] port.
3 Connecting and Using a Source Device
44
3
Connecting and Using a Source Device
Connection Using an HDMI-DVI Cable
DVI IN
1
2
Connect the DVI cable to the [DVI IN] port on the back of the product and the HDMI port on the PC.
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC.
(For details, refer to "3.3 Connecting the Power".)
3
Press [
] to change the input source to Digital.
Audio is not available if the PC and product are connected via the [DVI] port.
3 Connecting and Using a Source Device
45
3
Connecting and Using a Source Device
3.2.2 Driver Installation
z
You can set the optimum resolution and frequency for this product by installing the corresponding
drivers.
z
An installation driver is contained on the CD supplied with the product.
z
If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and
download the file.
1
2
3
4
Insert the user manual CD provided with the product into the CD-ROM drive.
5
Go to Display Properties and check that the resolution and refresh rate are appropriate.
Click "Windows Driver".
Follow the instructions given on the screen to proceed with installation.
Select your product model from the list of models.
Refer to your Windows OS manual for further details.
3 Connecting and Using a Source Device
46
3
Connecting and Using a Source Device
3.2.3 Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
Select a language and change the resolution to the optimum value.
The optimal resolution for this monitor is as follows:
[+]
Follow the above settings to set the resolution.
English
EXIT
1
2
Press [
֩Ѝ‫ی‬Ԃक
࣏ࢽ
] to move to the language you want and press [
To hide the information message, press [
AUTO
۴੔
].
].
z
If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
z
The optimum resolution can also be selected in Control Panel on your PC.
3 Connecting and Using a Source Device
47
3
Connecting and Using a Source Device
3.2.4 Changing the Resolution Using a PC
z
Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture
quality.
z
The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel
Display
Settings and change the resolution.
3 Connecting and Using a Source Device
48
3
Connecting and Using a Source Device
Changing the Resolution on Windows Vista
Go to Control Panel
Personalization
Display Settings and change the resolution.
3 Connecting and Using a Source Device
49
3
Connecting and Using a Source Device
Changing the Resolution on Windows 7
Go to Control Panel
Display
Screen Resolution and change the resolution.
3 Connecting and Using a Source Device
50
3
3.3
Connecting and Using a Source Device
Connecting the Power
Connect the power cable to the DC power
adapter. Next, connect the DC power
adapter to [DC 14V IN] on the stand base.
DC 14V IN
Connect the power extension cable to [DC
14V] on the monitor and [DC 14V OUT] on
the stand base.
DC 14V
DC 14V OUT
Plug in the power cable to the power socket.
The DC power adapter cannot be attached to the back of the monitor.
3 Connecting and Using a Source Device
51
4
4.1
Screen Setup
Configure the screen settings such as brightness and color tone.
Brightness
You can adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
SAMSUNG
This menu is not available when MAGIC
Bright is set to Dynamic Contrast mode.
4.1.1 Configuring Brightness
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Brightness and press [
] on the product.
] on the product. The following screen will
appear.
PICTURE
Brightness
:
100
Contrast
:
75
Sharpness
:
60
SAMSUNG
MAGIC Bright
: Custom
SAMSUNG
MAGIC Angle
Coarse
: Off
:
1936
Fine
:
0
ࢇࢷ֩Ѝ
4
Adjust the Brightness using the [
࣏ࢽ
AUTO
۴੔
] buttons.
4 Screen Setup
52
4
4.2
Screen Setup
Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
z
SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
z
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
4.2.1 Configuring Contrast
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Contrast and press [
] on the product.
] on the product. The following screen will
appear.
PICTURE
Brightness
100
Contrast
75
Sharpness
60
SAMSUNG
MAGIC Bright
Custom
SAMSUNG
MAGIC Angle
Coarse
: Off
Fine
ࢇࢷ֩Ѝ
4
Adjust the Contrast using the [
࣏ࢽ
1936
0
AUTO
۴੔
] buttons.
4 Screen Setup
53
4
4.3
Screen Setup
Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
z
SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
z
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
4.3.1 Configuring Sharpness
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Sharpness and press [
] on the product.
] on the product. The following screen will
appear.
PICTURE
Brightness
100
Contrast
75
Sharpness
60
SAMSUNG
MAGIC Bright
Custom
SAMSUNG
MAGIC Angle
Coarse
Off
Fine
ࢇࢷ֩Ѝ
4
Adjust the Sharpness using the [
࣏ࢽ
1936
0
AUTO
۴੔
] buttons.
4 Screen Setup
54
4
4.4
Screen Setup
SAMSUNG MAGIC Bright
This menu provides an optimum picture quality suitable for the environment where the product will be
used.
SAMSUNG
This menu is not available when MAGIC
Angle is enabled.
This feature provides the viewing angle, brightness, and tint to suit your preferences.
4.4.1 Configuring SAMSUNG MAGIC Bright
1
2
3
Press [
Press [
Press [
] on the product.
] to move to PICTURE and press [
] on the product.
SAMSUNG
] to move to MAGICBright and press [
] on the product. The following screen will
appear.
PICTURE
Brightness
100
Contrast
75
Sharpness
60
SAMSUNG
MAGIC Bright
Custom
‫ࢽ࣏࢕ࡈی‬
SAMSUNG
MAGIC Angle
Coarse
ଥࢿ
Game
Fine
ࢇࢷ֩Ѝ
Standard
Cinema
Dynamic Contrast
࣏ࢽ
0
AUTO
۴੔
z
Custom: Customize the contrast and brightness as required.
z
Standard: Obtain a picture quality suitable for editing documents or using Internet.
z
Game: Obtain a picture quality suitable for playing games that involve many graphic effects and
dynamic movements.
z
Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD
content.
z
4
5
Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
4 Screen Setup
55
4
4.5
Screen Setup
SAMSUNG MAGIC Angle
SAMSUNG
MAGICAngle
allows you to configure the settings to obtain the optimum picture quality according to your
viewing angle.
z
SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
z
SAMSUNG
This menu is not available when MAGIC
Color is enabled.
This feature provides the viewing angle, brightness, and tint to suit your preferences.
4.5.1 Configuring SAMSUNG MAGIC Angle
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
SAMSUNG
] to move to MAGIC
Angle and press [
] on the product.
] on the product. The following screen will
appear.
PICTURE
Brightness
100
Contrast
75
Sharpness
60
SAMSUNG
MAGIC Bright
‫ࢽ࣏࢕ࡈی‬
Off
SAMSUNG
MAGIC Angle
Coarse
Lean Back Mode 2
Standing Mode
ଥࢿ
Fine
Group View
Lean Back Mode 1
Side Mode
Custom
ࢇࢷ֩Ѝ
AUTO
࣏ࢽ
۴੔
4
1
1
5
5
2
3
4
5
① : Select this option to view directly in front of the product.
z
Off
z
Lean Back Mode 1
② : Select this option to view from a place slightly lower than the product.
z
Lean Back Mode 2
③ : Select this option to view from a place lower than Lean Back Mode 1.
z
Standing Mode
z
Side Mode
z
Group View: Select this option for more than one viewer to view from places
z
Custom: Lean Back Mode 1 will be applied by default if Custom is selected.
Press [
④ : Select this option to view from a place higher than the product.
⑤ : Select this option to view from either side of the product.
] to move to the option you want and press [
① , ④ , and ⑤ .
].
The selected option will be applied.
4 Screen Setup
56
4
4.6
Screen Setup
Coarse
Adjust the screen frequency.
This menu is available in Analog mode only.
4.6.1 Adjusting Coarse
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Coarse and press [
] on the product.
] on the product. The following screen will appear.
PICTURE
Brightness
:
100
Contrast
:
75
Sharpness
:
60
SAMSUNG
MAGIC Bright
: Custom
MAGIC Angle
Coarse
SAMSUNG
: Off
Fine
:
ࢇࢷ֩Ѝ
4
Adjust the Coarse using the [
:
࣏ࢽ
1936
0
AUTO
۴੔
] buttons.
4 Screen Setup
57
4
4.7
Screen Setup
Fine
Fine-adjust the screen to obtain a vivid picture.
This menu is available in Analog mode only.
4.7.1 Adjusting Fine
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Fine and press [
] on the product.
] on the product. The following screen will appear.
PICTURE
Brightness
:
100
Contrast
:
75
Sharpness
:
60
SAMSUNG
MAGIC Bright
: Custom
SAMSUNG
MAGIC Angle
Coarse
: Off
:
1936
Fine
:
0
ࢇࢷ֩Ѝ
4
Adjust the Fine using the [
࣏ࢽ
AUTO
۴੔
] buttons.
4 Screen Setup
58
5
Configuring Tint
SAMSUNG
Adjust the tint of the screen. This menu is not available when MAGIC
Bright is set to Cinema or
Dynamic Contrast mode.
5.1
SAMSUNG MAGIC Color
SAMSUNG
MAGICColor
is a new picture-quality improvement technology developed independently by Samsung,
which delivers vivid natural colors without picture quality degradation.
SAMSUNG
This menu is not available when MAGIC
Angle is enabled.
5.1.1 Configuring SAMSUNG MAGIC Color
1
2
3
Press [
Press [
Press [
] on the product.
] to move to COLOR and press [
] on the product.
SAMSUNG
] to move to MAGICColor and press [
] on the product. The following screen will
appear.
COLOR
4
5
SAMSUNG
MAGIC Color
:
Red
:
Green
:
Blue
:
Color Tone
: Normal
Gamma
: Mode1
ࢇࢷ֩Ѝ
࣏ࢽ
Off
Demo
Full
Intelligent
50
AUTO
۴੔
SAMSUNG
z
Off: Disable MAGICColor.
z
SAMSUNG
Demo: Compare normal screen mode with MAGIC
Color mode.
z
Full: Obtain a vivid picture quality for all areas including the flesh colors in the picture.
z
Intelligent: Improve the chroma for all areas except the flesh colors in the picture.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
5 Configuring Tint
59
5
5.2
Configuring Tint
Red
Adjust the value of the color red in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
5.2.1 Configuring Red
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
Press [
] to move to Red and press [
] on the product.
] on the product. The following screen will appear.
&2/25
4
Adjust the Red using the [
SAMSUNG
MAGIC Color
: Off
Red
:
Green
:
50
Blue
:
50
Color Tone
: Normal
Gamma
: Mode1
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
࣏ࢽ
࣏ࢽ
50
AUTO
۴੔
] buttons.
5 Configuring Tint
60
5
5.3
Configuring Tint
Green
Adjust the value of the color green in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
5.3.1 Configuring Green
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
Press [
] to move to Green and press [
] on the product.
] on the product. The following screen will appear.
COLOR
4
Adjust the Green using the [
SAMSUNG
MAGIC Color
: Off
Red
:
50
Green
:
50
Blue
:
50
Color Tone
: Normal
Gamma
: Mode1
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
࣏ࢽ
࣏ࢽ
AUTO
۴੔
] buttons.
5 Configuring Tint
61
5
5.4
Configuring Tint
Blue
Adjust the value of the color blue in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
5.4.1 Configuring Blue
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
Press [
] to move to Blue and press [
] on the product.
] on the product. The following screen will appear.
COLOR
4
Adjust the Blue using the [
SAMSUNG
MAGIC Color
: Off
Red
:
50
Green
:
50
Blue
:
50
Color Tone
: Normal
Gamma
: Mode1
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
࣏ࢽ
࣏ࢽ
AUTO
۴੔
] buttons.
5 Configuring Tint
62
5
5.5
Configuring Tint
Color Tone
Adjust the general color tone of the picture.
z
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
z
SAMSUNG
This menu is not available when MAGIC
Angle is enabled.
5.5.1 Configuring the Color Tone Settings
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
Press [
] to move to Color Tone and press [
] on the product.
] on the product. The following screen will
appear.
COLOR
SAMSUNG
MAGIC Color
: Off
Red
:
50
Green
:
50
Blue
:
Color Tone
Gamma
ࢇࢷ֩Ѝ
4
5
Cool 2
Cool 1
: ૲ࣱ
Normal
: ֻҖ
Warm 1
Warm 2
Custom
࣏ࢽ
AUTO
۴੔
z
Cool 2: Set the color temperature to be cooler than Cool 1.
z
Cool 1: Set the color temperature to be cooler than Normal mode.
z
Normal: Display the standard color tone.
z
Warm 1: Set the color temperature to be warmer than Normal mode.
z
Warm 2: Set the color temperature to be warmer than Warm 1.
z
Custom: Customize the color tone.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
5 Configuring Tint
63
5
5.6
Configuring Tint
Gamma
Adjust the mid-range brightness (Gamma) of the picture.
SAMSUNG
This menu is not available when MAGIC
Angle is enabled.
5.6.1 Configuring Gamma
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
] on the product.
Press [
] to move to Gamma and press [
] on the product. The following screen will appear.
COLOR
4
5
Press [
SAMSUNG
MAGIC Color
: Off
Red
:
50
Green
:
50
Blue
:
50
Color Tone
: Normal
Gamma
: Mode1
ֻҖ
Mode2
Mode3
ࢇࢷ֩Ѝ
࣏ࢽ
] to move to the option you want and press [
AUTO
۴੔
].
The selected option will be applied.
5 Configuring Tint
64
6
6.1
Resizing or Relocating the Screen
H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
This menu is available in Analog mode only.
6.1.1 Configuring H-Position & V-Position
1
2
3
Press [
] on the product.
Press [
] to move to SIZE&POSITION and press [
] on the product.
Press [
] to move to H-Position or V-Position, and press [
]. The following screen will
appear.
SIZE&POSITION
H-Position
:
50
H-Position
:
50
V-Position
:
50
V-Position
:
50
Image Size
: Wide
Image Size
: Wide
Menu H-Position
:
50
Menu H-Position
:
50
Menu V-Position
:
1
Menu V-Position
:
1
ࢇࢷ֩Ѝ
4
SIZE&POSITION
Press [
࣏ࢽ
AUTO
۴੔
ࢇࢷ֩Ѝ
࣏ࢽ
AUTO
۴੔
] to configure H-Position or V-Position.
6 Resizing or Relocating the Screen
65
6
6.2
Resizing or Relocating the Screen
Image Size
Change the picture size.
6.2.1 Changing the Image Size
1
2
3
Press [
] on the product.
Press [
] to move to SIZE&POSITION and press [
Press [
] to move to Image Size and press [
] on the product.
] on the product. The following screen will
appear.
SIZE&POSITION
H-Position
50
V-Position
50
Image Size
Menu H-Position
࢕Ѱ
Auto
Wide
Menu V-Position
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
1
AUTO
࣏ࢽ
࣏ࢽ
۴੔
z
Auto: Display the picture according to the aspect ratio of the input source.
z
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
SIZE&POSITION
H-Position
50
V-Position
50
Image Size
4:3
࢕Ѱ
:LGH
6FUHHQ)LW
Menu H-Position
Menu V-Position
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
4
5
1
AUTO
࣏ࢽ
࣏ࢽ
۴੔
z
4:3: Display the picture with an aspect ratio of 4:3.
z
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
z
Screen Fit: Display the picture with the original aspect ratio without cutting off.
z
Changing the screen size is available when the following conditions are satisfied.
z
A digital output device is connected using the DVI/DP cable.
z
The input signal is 480p, 576p, 720p, 1080i, or 1080p.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
6 Resizing or Relocating the Screen
66
6
6.3
Resizing or Relocating the Screen
Menu H-Position & Menu V-Position
Menu H-Position: Move the menu position to the left or right.
Menu V-Position: Move the menu position up or down.
6.3.1 Configuring Menu H-Position & Menu V-Position
1
2
3
Press [
] on the product.
Press [
] to move to SIZE&POSITION and press [
] on the product.
Press [
] to move to Menu H-Position or Menu V-Position, and press [
]. The following
screen will appear.
SIZE&POSITION
H-Position
:
50
H-Position
:
50
V-Position
:
50
V-Position
:
50
Image Size
: Wide
Image Size
: Wide
Menu H-Position
:
50
Menu H-Position
:
50
Menu V-Position
:
1
Menu V-Position
:
1
ࢇࢷ֩Ѝ
4
SIZE&POSITION
Press [
࣏ࢽ
AUTO
۴੔
ࢇࢷ֩Ѝ
࣏ࢽ
AUTO
۴੔
] to configure Menu H-Position or Menu V-Position.
6 Resizing or Relocating the Screen
67
7
7.1
Setup and Reset
Reset
Return all the settings for the product to the default factory settings.
7.1.1 Initializing Settings (Reset)
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Reset and press [
] on the product.
] on the product. The following screen will appear.
SETUP&RESET
Reset
Language
English
Off Timer On/Off
Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
Acceleration
Customized Key
SAMSUNG
MAGIC Angle
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
AUTO
࣏ࢽ
࣏ࢽ
ࢇѰ
۴੔
۴੔
Reset all settings?
Yes
No
EXIT
4
5
Press [
] to move to the option you want and press [
AUTO
].
The selected option will be applied.
7 Setup and Reset
68
7
7.2
Setup and Reset
Language
Set the menu language.
z
A change to the language setting will only be applied to the onscreen menu display.
z
It will not be applied to other functions on your PC.
7.2.1 Changing the Language
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Language and press [
] on the product.
] on the product. The following screen will
appear.
SETUP&RESET
Reset
Language
Off Timer On/Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
Customized Key
ࢇࢷ֩Ѝ
4
5
Press [
'HXWVFK
(QJOLVK
(VSDxRO
)UDQoDLV
ଥࢿ
,WDOLDQR
0DJ\DU
3ROVNL
ଥࢿ
3RUWXJXrV
ƧNJLjLjǁƿǀ
6YHQVND
3&
7UNoH
ᣣᧄ⺆
ɼ‫ܖ‬؆‫ـ‬
ଞ˲߭
∝䇁
ࢇѰ
] to move to the language you want and press [
AUTO
۴੔
].
The selected option will be applied.
7 Setup and Reset
69
7
7.3
Setup and Reset
Off Timer On/Off
Enable or disable the off timer that automatically powers off the product.
7.3.1 Configuring Off Timer On/Off
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Off Timer On/Off and press [
] on the product.
] on the product. The following screen
will appear.
SETUP&RESET
Reset
Language
: English
Off Timer On/Off
: Off
On
Off Timer Setting
PC/AV Mode
Key Repeat Time
: Acceleration
Customized Key
: SAMSUNG
MAGIC Angle
ࢇࢷ֩Ѝ
4
5
ࢇѰ
AUTO
۴੔
z
Off: Deactivate the off timer so that the product does not power off automatically.
z
On: Activate the off timer so that the product powers off automatically.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
7 Setup and Reset
70
7
7.4
Setup and Reset
Off Timer Setting
The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the
specified number of hours.
This menu is available only when Off Timer On/Off is set to On.
7.4.1 Configuring Off Timer Setting
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Off Timer Setting and press [
] on the product.
] on the product. The following screen
will appear.
SETUP&RESET
Reset
Language
: English
Off Timer On/Off
: On
Off Timer Setting
:
10h
PC/AV Mode
Key Repeat Time
: Acceleration
Customized Key
: SAMSUNG
MAGIC Angle
ࢇࢷ֩Ѝ
4
Press [
ࢇѰ
AUTO
۴੔
] to configure Off Timer Setting.
7 Setup and Reset
71
7
7.5
Setup and Reset
PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.
PC/AV Mode is only available in Digital mode.
7.5.1 Configuring PC/AV Mode
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to PC/AV Mode and press [
] on the product.
] on the product. The following screen will
appear.
SETUP&RESET
Reset
Language
: English
Off Timer On/Off
: On
Off Timer Setting
:
PC/AV Mode
Key Repeat Time
: PC
: AV
Customized Key
: SAMSUNG
MAGIC Angle
ࢇࢷ֩Ѝ
4
5
Press [
ࢇѰ
] to move to the option you want and press [
10h
AUTO
۴੔
].
The selected option will be applied.
7 Setup and Reset
72
7
7.6
Setup and Reset
Key Repeat Time
Control the response rate of a button when the button is pressed.
7.6.1 Configuring Key Repeat Time
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Key Repeat Time and press [
] on the product.
] on the product. The following screen
will appear.
SETUP&RESET
Reset
Language
: English
Off Timer On/Off
: On
Off Timer Setting
Key Repeat Time
: Acceleration
1 sec
2 sec
: No Repeat
Customized Key
:
PC/AV Mode
ࢇࢷ֩Ѝ
z
‫ݤ‬ɾ
SAMSUNG
MAGIC Angle
ࢇѰ
AUTO
۴੔
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4
5
Press [
] to move to the option you want and press [
].
The selected option will be applied.
7 Setup and Reset
73
7
7.7
Setup and Reset
Customized Key
You can customize Customized Key as follows.
7.7.1 Configuring Customized Key
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Customized Key and press [
] on the product.
] on the product. The following screen
will appear.
SETUP&RESET
Reset
Language
English
Off Timer On/Off
Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
Customized Key
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
z
4
5
SAMSUNG
MAGICAngle
Press [
PC
$FFHOHUDWLRQ
MAGIC Angle
SAMSUNG
Acceleration
2Q
MAGIC Bright
: SAMSUNG
Image
Bright
MAGICSize
SAMSUNG
࣏ࢽ
࣏ࢽ
ࢇѰ
AUTO
۴੔
۴੔
SAMSUNG
- MAGICBright - Image Size
] to move to the option you want and press [
].
The selected option will be applied.
7 Setup and Reset
74
7
7.8
Setup and Reset
Auto Source
You can activate Auto Source.
7.8.1 Configuring Auto Source
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Auto Source and press [
] on the product.
] on the product. The following screen will
appear.
SETUP&RESET
Display Time
: Auto
: Manual
Menu Transparency
: On
Auto Source
Return
4
5
Adjust
z
Auto: The input source is automatically recognized.
z
Manual: Manually select an input source.
Press [
] to move to the option you want and press [
AUTO
Enter
].
The selected option will be applied.
7 Setup and Reset
75
7
7.9
Setup and Reset
Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
7.9.1 Configuring Display Time
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Display Time and press [
] on the product.
] on the product. The following screen will
appear.
SETUP&RESET
Auto Source
: Auto
Display Time
: 5 sec
10 sec
:
20 sec
200 sec
Menu Transparency
Return
4
5
Press [
Adjust
] to move to the option you want and press [
AUTO
Enter
].
The selected option will be applied.
7 Setup and Reset
76
7
Setup and Reset
7.10 Menu Transparency
Set the transparency for the menu windows:
7.10.1 Changing Menu Transparency
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Menu Transparency and press [
] on the product.
] on the product. The following
screen will appear.
SETUP&RESET
Auto Source
: Auto
Display Time
: 20 VHF
Menu Transparency
: Ѱ࢖
Off
On
Return
4
5
Press [
Adjust
] to move to the option you want and press [
AUTO
Enter
].
The selected option will be applied.
7 Setup and Reset
77
8
8.1
INFORMATION Menu and Others
INFORMATION
View the current input source, frequency and resolution.
8.1.1 Displaying INFORMATION
1
2
Press [
Press [
] on the product.
] to move to INFORMATION. The current input source, frequency and resolution will
appear.
PICTURE
COLOR
Digital
67.5kHz 60Hz PP
1920 x 1080
SIZE&POSITION
Optimal Mode
1920 x 1080 60Hz
SETUP&RESET
INFORMATION
EXIT
֩Ѝ‫ی‬Ԃक
࣏ࢽ
AUTO
۴੔
The displayed image may differ depending on the model.
8.2
Configuring Brightness in the Initial Screen
Adjust the Brightness using the [
displayed.
1
Press [
] buttons when the initial screen (that displays no menu screen) is
] when the initial screen is displayed. The following screen will appear.
Brightness
100
EXIT
2
Adjust the Brightness using the [
] buttons.
8 INFORMATION Menu and Others
78
9
9.1
Installing the Software
Natural Color
9.1.1 What is Natural Color?
One of the problems with using a PC is that the colors you see on the screen are different from the colors
of printed pictures or source images input through a scanner or digital camera. Natural Color is a color
management system developed by Samsung Electronics to resolve this problem. This software works
with Samsung products only and enables you to adjust the displayed colors on the screen to match the
colors of the printed pictures. For more information, refer to the online help of the software (F1).
The Natural Color is provided online. You can download it from the website below and install;
http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.html
9 Installing the Software
79
9
9.2
Installing the Software
MultiScreen
MultiScreen
MultiScreen enables users to use the monitor by partitioning multiple sections.
9.2.1 Installing the Software
1
2
Insert the installation CD into the CD-ROM drive.
Select the "MultiScreen" setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and
double-click the "MultiScreen" setup file on the [CD-ROM].
3
4
When the Installation Wizard appears, click [Next].
Follow the instructions given on the screen to proceed with installation.
z
The software may not work properly if you do not restart the computer after the installation.
z
The "MultiScreen" icon may not appear depending on the computer system and the product
specifications.
z
If the shortcut icon does not appear, press the "F5" key.
Restrictions and Problems with the Installation (MultiScreen)
The "MultiScreen" installation may be affected by the Graphics card, [Motherboard] and the Networking
environment.
Operating System
"OS"
z
"Windows 2000"
z
"Windows XP Home Edition"
z
"Windows XP Professional"
z
"Windows Vista 32bit"
z
"Windows 7 32bit"
For "MultiScreen", the operating systems "Windows 2000" or later is recommended.
"Hardware"
z
At least 32MB of memory
z
At least 60MB of free space on the hard disk drive
9 Installing the Software
80
9
Installing the Software
9.2.2 Removing the Software
Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs].
Select "MultiScreen" from the program list and click the [Add/Delete] button.
9 Installing the Software
81
9
9.3
Installing the Software
MagicRMS Pro
9.3.1 About MagicRMS Pro
The MagicRMS Pro program can be used to remotely control a Samsung network monitor. The design
of the user-oriented interface makes it easy and convenient to use.
Using MagicRMS Pro, you can schedule a task to be performed at a specified time on a network
monitor.
Also, you can manage multiple network monitors efficiently by grouping or filtering them according to
specific conditions.
To use the MagicRMS Pro Solution or MagicRMS Pro Agent and to view the user guide, visit
www.samsunglfd.com. Go to Support>Download Center, and search for MagicRMS to download.
Open source license notice
In the case of using open source software, Open Source licenses are available on the MagicRMS Pro Agent.
Open Source License Notice is written only English.
9 Installing the Software
82
10
Troubleshooting Guide
10.1 Requirements Before Contacting Samsung Customer
Service Center
10.1.1 Testing the Product
Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center.
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected
to a PC, perform a self-diagnosis test.
1
2
3
4
Power off both the PC and product.
Disconnect the cables from the product.
Power on the product.
If the message Check Signal Cable appears, the product is working normally.
If the screen remains blank, check the PC system, video controller and cable.
10.1.2 Checking the Resolution and Frequency
For a mode that exceeds the supported resolution (refer to "11.3 Standard Signal Mode Table"), the
message Not Optimum Mode will appear for a short time.
10.1.3 Check the following.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product
and PC, and ensure the connectors are locked.
(Refer to "3.2 Connecting and Using a PC")
Screen issue
The power LED is off. The screen will not switch
on.
Check that the power cable is connected
properly. (Refer to "3.2 Connecting and Using a
PC")
The message Check Signal Cable appears.
Check that the cable is properly connected to the
product. (Refer to "3.2 Connecting and Using a
PC")
Check that the device connected to the product is
powered on.
10 Troubleshooting Guide
83
10
Troubleshooting Guide
Screen issue
Not Optimum Mode is displayed.
This message appears if the signal from the
graphics card exceeds the maximum resolution or
frequency for the product.
Change the maximum resolution and frequency to
suit the product performance, referring to
Standard Signal Mode Table (91page).
The images on the screen look distorted.
Check the cable connection to the product (Refer
to "3.2 Connecting and Using a PC")
The screen is not clear. The screen is blurry.
Adjust Coarse(57page) and Fine(58page).
Remove any accessories (video extension cable,
etc.) and try again.
Set the resolution and frequency to the
recommended level. (Refer to "11.1 General")
The screen appears unstable and shaky.
There are shadows or ghost images left on the
screen.
Check that the resolution and frequency for the
PC are within the range of resolution and
frequency compatible with the product. Next, if
required, change the settings, referring to
Standard Signal Mode Table (91page) in this
manual and the INFORMATION menu on the
product.
The screen is too bright. The screen is too dark.
Adjust Brightness(52page) and
Contrast(53page).
Screen color is inconsistent.
Change the COLOR settings.
(Refer to " Configuring Tint")
The colors on the screen have a shadow and are
distorted.
Change the COLOR settings.
White does not really look white.
Change the COLOR settings.
(Refer to " Configuring Tint")
(Refer to " Configuring Tint")
There is no image on the screen and the power
LED blinks every 0.5 to 1 second.
The product is operating in power-saving mode.
Press any key on the keyboard or move the
mouse to return to normal operating mode.
Sound issue
There is no sound.
Check the connection of the audio cable or adjust
the volume.
Check the volume.
10 Troubleshooting Guide
84
10
Troubleshooting Guide
Sound issue
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the
maximum level, adjust the volume on your PC
sound card or software program.
Source device issue
A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is
booting, have your PC serviced.
10 Troubleshooting Guide
85
10
Troubleshooting Guide
10.2 Q & A
Question
How can I change the
frequency?
Answer
Set the frequency on your graphics card.
z
Windows XP: Go to Control Panel
Themes
Display
Settings
Appearance and
Advanced
Monitor,
and adjust Refresh rate under Monitor settings.
z
Windows ME/2000: Go to Control Panel
Settings
Advanced
Display
Monitor, and adjust Refresh rate
under Monitor settings.
z
Windows Vista: Go to Control Panel
Appearance and
Personalization
Display Settings
Advanced Settings
Personalization
Monitor, and adjust Refresh rate
under Monitor settings.
z
Windows 7: Go to Control Panel
Personalization
Advanced settings
Display
Appearance and
Screen Resolution
Monitor, and adjust Refresh rate under
Monitor settings.
10 Troubleshooting Guide
86
10
Troubleshooting Guide
Question
How can I change the
resolution?
Answer
z
Windows XP: Go to Control Panel
Themes
z
Display
Appearance and
Settings, and adjust the resolution.
Windows ME/2000: Go to Control Panel
Display
Settings, and adjust the resolution.
z
Windows Vista: Go to Control Panel
Personalization
Personalize
Appearance and
Display Settings, and
adjust the resolution.
z
Windows 7: Go to Control Panel
Personalization
Display
Appearance and
Adjust Resolution, and adjust
the resolution.
How do I set power-saving
mode?
z
Windows XP: Set power-saving mode in Control Panel
Appearance and Themes
Display
Screen Saver
Settings or BIOS SETUP on the PC.
z
Windows ME/2000: Set power-saving mode in Control Panel
Display
Screen Saver Settings or BIOS SETUP on the
PC.
z
Windows Vista: Set power-saving mode in Control Panel
Appearance and Personalization
Personalize
Screen
Saver Settings or BIOS SETUP on the PC.
z
Windows 7: Set power-saving mode in Control Panel
Appearance and Personalization
Personalize
Screen
Saver Settings or BIOS SETUP on the PC.
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
10 Troubleshooting Guide
87
11
Specifications
11.1 General
Model Name
Panel
Synchronization
TS190W
TS220W
TS240W
Size
19 inches (48 cm)
21.5 inches (55 cm)
24 inches (61 cm)
Display area
408.2 mm (H) x
255.2 mm (V) /
16.1 inches (H) x
10.0 inches (V)
476.6 mm (H) x
268.1 mm (V) /
18.8 inches (H) x
10.6 inches (V)
518.4 mm (H) x
324.0 mm (V) /
20.4 inches (H) x
12.8 inches (V)
Horizontal
Frequency
30~81 kHz
Vertical
Frequency
56~75 Hz
Display Color
16.7 M
Optimum
Resolution
1440 x 900 @ 60 Hz
1920 x 1080 @ 60
Hz
1920 x 1200 @ 60
Hz
Maximum
Resolution
1440 x 900 @ 60 Hz
1920 x 1080 @ 60
Hz
1920 x 1200 @ 60
Hz
Maximum Pixel Clock
137 MHz (Analog,
Digital)
164 MHz (Analog,
Digital)
164 MHz (Analog,
Digital)
Power Supply
This product uses 100 to 240V. Refer to the label at the back of the
product as the standard voltage can vary in different countries.
Signal connectors
RGB IN (D-Sub) port, DVI port
Server connector
LAN
USB
USB 2.0 x 6 (Down stream)
Resolution
Dimensions
(W x H x D) /
Weight
Environmental
considerations
With Stand
443.0 × 416.8 ×
227.0 mm / 17.4 x
16.4 x 8.9 inches /
4.4 Kg / 9.7 Ibs
513.0 × 424.1 ×
227.0 mm / 20.2 x
16.7 x 8.9 inches /
4.9 Kg / 10.8 Ibs
560.0 × 444.3 ×
227.0 mm / 22.0 x
17.5 x 8.9 inches /
5.3 Kg / 11.7 Ibs
Without Stand
443.0 × 301.9 ×
49.5 mm / 17.4 x
11.9 x 1.9 inches /
3.2 Kg / 7.1 Ibs
513.0 × 317.0 ×
50.0 mm / 20.2 x
12.5 x 2.0 inches /
3.6 Kg / 7.9 Ibs
560.0 × 374.0 ×
50.0 mm / 22.0 x
14.7 x 2.0 inches /
4.0 Kg / 8.8 Ibs
Operating
Temperature: 50°F ~ 104°F (10°C ~ 40°C),
Humidity: 10 % ~ 80 %, non-condensing
Storage
Temperature: -4°F ~ 113°F (-20°C ~ 45°C),
Humidity: 5 % ~ 95 %, non-condensing
11 Specifications
88
11
Specifications
Model Name
TS190W
TS220W
TS240W
Plug-and-Play
This monitor can be installed and used with any Plug-and-Play
compatible systems. Two-way data exchange between the monitor
and PC system optimizes the monitor settings. Monitor installation
takes place automatically. However, you can customize the
installation settings if desired.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately
1 pixel per million (1ppm) may appear brighter or darker on the panel.
This does not affect product performance.
VESA (V x H)
100 x 100 mm / 3.9 x 3.9 inches
The above specifications are subject to change without notice to improve quality.
Class B device (broadcast communications device for home use)
This Class B device designed for home use is registered for EMC requirements and can be used in all
regions.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
CALIFORNIA USA ONLY (Applicable for networking models only.)
This Perchlorate warning applies only to primary CR(Manganese Dioxide) Lithium coin cells in the
product sold or distributed ONLY in California USA
"Perchloate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/
perchlorate."
11 Specifications
89
11
Specifications
11.2 PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and
changing the color of the power LED if the product is not used for a specified period of time. The power
is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or
move the mouse. Power-saving mode functions only when the product is connected to a PC that has a
power-saving function.
PowerSaver
Normal Operation
Power saving
mode
Power off
(Power button
off)
Power off
(Power switch
off)
Power Indicator
On
Off
Off
Off
Less than 1.8 W
Less than 1.8 W
0W
TS190W : Less than 45 W
Power
Consumption
TS220W : Less than 50 W
TS240W : Less than 55 W
z
The power consumption level can vary in different operating conditions or when settings are
changed.
z
To reduce the power consumption to 0 watts, turn off the switch on the adapter or disconnect the
power cable. Be sure to disconnect the power cable when you will not be using the product for an
extended period of time. To reduce the power consumption to 0 watts when the power switch is
not available, disconnect the power cable.
11 Specifications
90
11
Specifications
11.3 Standard Signal Mode Table
z
This product can be set to only one resolution for each screen size to obtain the optimum picture
quality due to the nature of the panel. Therefore, a resolution other than the specified resolution
may degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for the screen size of your product.
z
Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT
monitor before you exchange it with the LCD monitor.
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will
automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the
settings according to the following table by referring to the graphics card user manual.
TS190W
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 960
60.000
60.000
108.000
+/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 640 x 480
31.469
59.940
25.175
-/-
11 Specifications
91
11
Specifications
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 800
62.795
74.934
106.500
-/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1440 x 900
70.635
74.984
136.750
-/+
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
IBM, 640 x 480
31.469
59.940
25.175
-/-
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 960
60.000
60.000
108.000
+/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 800
62.795
74.934
106.500
-/+
TS220W
11 Specifications
92
11
Specifications
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1440 x 900
70.635
74.984
136.750
-/+
VESA, 1600 x 1200
75.000
60.000
162.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
IBM, 640 x 480
31.469
59.940
25.175
-/-
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 960
60.000
60.000
108.000
+/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1440 x 900
70.635
74.984
136.750
-/+
TS240W
11 Specifications
93
11
Specifications
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1600 x 1200
75.000
60.000
162.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
VESA,1920 x 1200 (RB)
74.038
59.950
154.000
+/-
z
Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a
horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency.
Horizontal frequency is measured in kHz.
z
Vertical Frequency
Repeating the same picture dozens of times per second allows you to view natural pictures. The
repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
11 Specifications
94
Appendix
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
NORTH AMERICA
U.S.A
1-800-SAMSUNG (726-7864)
http://www.samsung.com
CANADA
1-800-SAMSUNG (726-7864)
http://www.samsung.com/ca
http://www.samsung.com/ch_fr
(French)
MEXICO
01-800-SAMSUNG (726-7864)
http://www.samsung.com
LATIN AMERICA
ARGENTINA
0800-333-3733
http://www.samsung.com
BRAZIL
0800-124-421
4004-0000
http://www.samsung.com
BOLIVIA
800-10-7260
http://www.samsung.com
CHILE
800-SAMSUNG (726-7864)
http://www.samsung.com
From mobile 02-482 82 00
COLOMBIA
01-8000112112
http://www.samsung.com
COSTA RICA
0-800-507-7267
http://www.samsung.com
DOMINICA
1-800-751-2676
http://www.samsung.com
ECUADOR
1-800-10-7267
http://www.samsung.com
EL SALVADOR
800-6225
http://www.samsung.com
GUATEMALA
1-800-299-0013
http://www.samsung.com
HONDURAS
800-27919267
http://www.samsung.com
JAMAICA
1-800-234-7267
http://www.samsung.com
NICARAGUA
00-1800-5077267
http://www.samsung.com
PANAMA
800-7267
http://www.samsung.com
PERU
0-800-777-08
http://www.samsung.com
PUERTO RICO
1-800-682-3180
http://www.samsung.com
TRINIDAD & TOBAGO
1-800-SAMSUNG (726-7864)
http://www.samsung.com
VENEZUELA
0-800-100-5303
http://www.samsung.com
Appendix
95
Appendix
EUROPE
ALBANIA
42 27 5755
http://www.samsung.com
AUSTRIA
0810 - SAMSUNG
(7267864, € 0.07/min)
http://www.samsung.com
BELGIUM
02-201-24-18
http://www.samsung.com/be
(Dutch)
http://www.samsung.com/be_fr
(French)
BOSNIA
05 133 1999
http://www.samsung.com
BULGARIA
07001 33 11
http://www.samsung.com
CROATIA
062 SAMSUNG (062 726 7864)
http://www.samsung.com
CZECH
800 - SAMSUNG (800-726786)
http://www.samsung.com
Samsung Electronics Czech and Slovak, s.r.o.,
Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8
DENMARK
70 70 19 70
http://www.samsung.com
FINLAND
030 - 6227 515
http://www.samsung.com
FRANCE
01 48 63 00 00
http://www.samsung.com
GERMANY
01805 - SAMSUNG
(726-7864,€ 0,14/Min)
http://www.samsung.com
CYPRUS
From landline : 8009 4000
http://www.samsung.com
GREECE
From landline : 80111-SAMSUNG
(7267864)
http://www.samsung.com
From landline & mobile : (+30)
210 6897691
HUNGARY
06-80-SAMSUNG (726-7864)
http://www.samsung.com
ITALIA
800-SAMSUNG (726-7864)
http://www.samsung.com
KOSOVO
+381 0113216899
http://www.samsung.com
LUXEMBURG
261 03 710
http://www.samsung.com
MACEDONIA
023 207 777
http://www.samsung.com
MONTENEGRO
020 405 888
http://www.samsung.com
NETHERLANDS
0900 - SAMSUNG
(0900-7267864) (€ 0,10/Min)
http://www.samsung.com
NORWAY
815-56 480
http://www.samsung.com
POLAND
0 801-1SAMSUNG (172-678)
+48 22 607-93-33
http://www.samsung.com
Appendix
96
Appendix
EUROPE
PORTUGAL
808 20 - SAMSUNG (808 20
http://www.samsung.com
7267)
RUMANIA
From landline : 08010-SAMSUNG
http://www.samsung.com
(7267864)
From landline & mobile : (+40)
21 206 01 10
SERBIA
0700 Samsung (0700 726 7864)
http://www.samsung.com
SLOVAKIA
0800 - SAMSUNG
http://www.samsung.com
(0800-726 786)
SPAIN
902 - 1 - SAMSUNG
(902 172 678)
http://www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
http://www.samsung.com
SWITZERLAND
0848-SAMSUNG
(7267864, CHF 0.08/min)
http://www.samsung.com/ch
U.K
0330 SAMSUNG (7267864)
http://www.samsung.com
EIRE
0818 717100
http://www.samsung.com
LITHUANIA
8-800-77777
http://www.samsung.com
LATVIA
8000-7267
http://www.samsung.com
ESTONIA
800-7267
http://www.samsung.com
TURKEY
444 77 11
http://www.samsung.com
http://www.samsung.com/ch_fr
(French)
CIS
RUSSIA
8-800-555-55-55
http://www.samsung.com
GEORGIA
8-800-555-555
http://www.samsung.com
ARMENIA
0-800-05-555
http://www.samsung.com
AZERBAIJAN
088-55-55-555
http://www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500
(GSM: 7799)
http://www.samsung.com
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com
KYRGYZSTAN
00-800-500-55-500
http://www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
http://www.samsung.com
MONGOLIA
-
http://www.samsung.com
Appendix
97
Appendix
CIS
UKRAINE
0-800-502-000
http://www.samsung.com/ua
http://www.samsung.com/
ua_ru
BELARUS
810-800-500-55-500
http://www.samsung.com
MOLDOVA
00-800-500-55-500
http://www.samsung.com
ASIA PACIFIC
AUSTRALIA
1300 362 603
http://www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com
CHINA
400-810-5858
http://www.samsung.com
HONG KONG
(852) 3698 - 4698
http://www.samsung.com/hk
http://www.samsung.com/
hk_en/
INDIA
1800 1100 11
http://www.samsung.com
3030 8282
1800 3000 8282
1800 266 8282
INDONESIA
0800-112-8888
021-5699-7777
http://www.samsung.com
JAPAN
0120-327-527
http://www.samsung.com
MALAYSIA
1800-88-9999
http://www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG (726-7864)
for PLDT
http://www.samsung.com
1-800-3-SAMSUNG (726-7864)
for Digitel
1-800-8-SAMSUNG (726-7864)
for Globe
02-5805777
SINGAPORE
1800-SAMSUNG (726-7864)
http://www.samsung.com
THAILAND
1800-29-3232
http://www.samsung.com
02-689-3232
TAIWAN
0800-329-999
http://www.samsung.com
0266-026-066
VIETNAM
1 800 588 889
http://www.samsung.com
Appendix
98
Appendix
MIDDlE EAST
IRAN
021-8255
http://www.samsung.com
OMAN
800-SAMSUNG (726-7864)
http://www.samsung.com
KUWAIT
183-2255
http://www.samsung.com
BAHRAIN
8000-4726
http://www.samsung.com
EGYPT
08000-726786
http://www.samsung.com
JORDAN
800-22273
http://www.samsung.com
MOROCCO
080 100 2255
http://www.samsung.com
SAUDI ARABIA
9200-21230
http://www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
http://www.samsung.com
AFRICA
CAMEROON
7095- 0077
http://www.samsung.com
COTE D'LVOIRE
8000 0077
http://www.samsung.com
GHANA
0800-10077
http://www.samsung.com
0302-200077
KENYA
0800 724 000
http://www.samsung.com
NIGERIA
0800-726-7864
http://www.samsung.com
SENEGAL
800-00-0077
http://www.samsung.com
SOUTH AFRICA
0860-SAMSUNG (726-7864)
http://www.samsung.com
TANZANIA
0685 88 99 00
http://www.samsung.com
UGANDA
0800 300 300
http://www.samsung.com
Appendix
99
Appendix
Correct Disposal
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of
with other household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take these items
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery
return systems.)
The marking on the battery, manual or packaging indicates that the battery in this
product should not be disposed of with other household waste. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or
lead above the reference levels in EC Directive 2006/66.
The battery incorporated in this product is not user replaceable. For information on its
replacement, please contact your service provider. Do not attempt to remove the
battery or dispose it in a fire. Do not disassemble, crush, or puncture the battery. If you
intend to discard the product, the waste collection site will take the appropriate
measures for the recycling and treatment of the product, including the battery.
Appendix
100
Appendix
Terminology
OSD(On Screen Display)
On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as
required. It allows you to change the screen brightness, tint, size and many other settings using
menus displayed on the screen.
Coarse
Coarse refers to the frequency of radio wave vibrations per second. A higher frequency transmits a
larger amount of data and is reflected easier. A lower frequency traverses obstacles more easily and
can travel farther, but it transmits a smaller amount of data. The Coarse menu allows you to manually
adjust the frequency to obtain the optimum picture quality. Adjust Coarse referring to Standard Signal
Mode Table (91page) according to the performance of your product and enjoy improved picture
quality.
Gamma
The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the
brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Grey scale
Scale refers to levels of color intensity that show variations of color change from darker areas to
brighter areas on the screen. Changes to the screen brightness are expressed with black and white
variation, and grey scale refers to the medium area between black and white. Changing the grey scale
through Gamma adjustment will change the medium brightness on the screen.
Scanning rate
Scanning rate, or refresh rate, refers to the frequency of screen refreshes. Screen data is transmitted
as it refreshes to display an image, although the refreshing is invisible to the naked eye. The number of
screen refreshes is called scanning rate and is measured in Hz. A scanning rate of 60Hz means that
the screen refreshes 60 times per second. The screen scanning rate depends on the performance of
the graphics cards in your PC and monitor.
Horizontal Frequency
Characters or images displayed on the monitor screen consist of numerous dots (pixels). Pixels are
transmitted in horizontal lines, which are then arranged vertically to create an image. The horizontal
frequency is measured in kHz and represents how many times horizontal lines per second are
transmitted and displayed on the monitor screen. A horizontal frequency of 85 means that the
horizontal lines that make up an image are transmitted 85 000 times per second, and the horizontal
frequency is indicated in 85kHz.
Appendix
101
Appendix
Vertical Frequency
One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and
represents how many images can be created per second by those horizontal lines. A vertical
frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is
also called "refresh rate" and affects screen flicker.
Resolution
Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the
level of display detail.
A higher resolution displays a greater amount of information on the screen and is suitable for
performing multiple tasks at the same time.
E.g. A resolution of 1920 x 1080 consists of 1,920 horizontal pixels (horizontal frequency) and 1,080
vertical lines (vertical resolution).
Plug & Play
The Plug & Play feature allows the automatic exchange of information between a monitor and PC to
produce an optimum display environment.
The monitor uses VESA DDC (international standard) to execute Plug & Play.
Appendix
102
Index
A
I
Auto Source 75
Image Size 66
INFORMATION 78
B
Installation 25
Before Connecting 43
Blue 62
K
Brightness 52
Key Repeat Time 73
C
L
Checking the Contents 19
Languagey 69
Cleaning 4
Coarse 57
Color Tone 63
Configuring Brightness in the Initial Screen 78
Connecting and Using a PC 44
M
MagicRMS Pro 82
Menu Transparency 77
MultiScreen 80
Connection to Use "Windows Embedded
Standard 7" 30
Contact SAMSUNG WORLDWIDE 95
N
Contrast 53
Natural Color 79
Copyright 2
Correct Disposal 100
Correct posture to use the product 13
Customized Key 74
D
Display Time 76
O
Off Timer On/Off 70
Off Timer Setting 71
P
Parts 21
PC/AV Mode 72
F
PowerSaver 90
Fine 58
Q
G
Q & A 86
Gamma 64
General 88
Green 61
R
Red 60
Index
103
Index
Requirements Before Contacting Samsung
Customer Service Center 83
Reset 68
S
Safety Precautions 6
SAMSUNG MAGIC Angle 56
SAMSUNG MAGIC Bright 55
SAMSUNG MAGIC Color 59
Sharpness 54
Standard Signal Mode Table 91
T
Terminology 101
U
Using "Windows Embedded Standard 7" 33
W
What is "Windows Embedded Standard 7"
Client? 29
Index
104
Download PDF