Samsung | DM65E-BC | Samsung SMART Signage DM65E-BC LED Benutzerhandbuch

User Manual
DM65E-BC
The colour and the appearance may differ depending on the product, and
the specifications are subject to change without prior notice to improve
the performance.
Recommended hours of use per day of this product is under 24 hours.
If the product is used for longer than 24 hours a day, the warranty may be
void.
Table of contents
Before Using the Product
Installing the Wall Mount
Wall Mount Kit Specifications (VESA)
Copyright7
Safety Precautions
8
Symbols
8
Cleaning
8
Storage9
Electricity and Safety
9
Installation10
Operation12
Remote Control (RS232C)
29
Cable Connection
29
Connection32
Control Codes
33
Using a touchscreen monitor
Touchscreen monitor
42
Read below before using the product
42
Requirements43
Preparations
Checking the Components
15
Components15
Parts17
Control Panel
17
Reverse Side
19
Tray20
Installing the Tray
21
Using the touch function
22
Plug In Module (Sold separately)
23
Anti-theft Lock
23
Remote Control
24
Before Installing the Product
(Installation Guide)
26
Ventilation26
Installing the Wall Mount
Preparing before installing Wall-Mount
27
28
27
27
Connecting the touchscreen monitor
Connecting to a PC
Connecting to a laptop or tablet PC
44
44
45
Configuring the touchscreen monitor
settings46
Calibrating a monitor
46
Calibration
47
Controlling the screen
49
Touchscreen gestures
49
Notes50
Connecting and Using
a Source Device
Before Connecting
Pre-connection Checkpoints
52
52
Connecting to a PC
52
Connection using the D-SUB cable
(Analogue type)
52
Connection using a DVI cable (Digital type) 53
Connection Using an HDMI-DVI Cable
53
Connection Using an HDMI Cable
54
Connecting to a Video Device
Connection Using an HDMI-DVI Cable
Connection Using an HDMI Cable
55
55
56
Connecting to an Audio System
56
Connecting the LAN Cable
57
Changing the Input source
Source
58
58
Using MDC
MDC Programme Installation/Uninstallation59
Installation59
Uninstallation59
Connecting to MDC
Using MDC via RS-232C (serial data
communications standards)
Using MDC via Ethernet
60
60
61
2
Table of contents
Home feature
Player63
Approving a connected device from
the server
64
Network Channel
68
Local Channel
68
Published Content
68
Network File
68
My Templates
68
Available features in the Player page
69
Player page Settings menu
70
When Content is Running
72
File Formats Compatible with Player74
File Formats Compatible with Videowall
79
Schedule81
Available features in the Schedule page
81
Template83
Clone Product86
ID Settings87
Device ID
87
PC Connection Cable
87
Device ID Auto Set
87
Video Wall88
Apply to
88
Video Wall
89
Network Status90
Picture Mode91
On/Off Timer92
On Timer92
Off Timer93
Holiday Management93
Ticker94
More settings94
URL Launcher95
Screen Adjustment
Picture Mode96
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)97
Picture Options103
Colour Tone104
Digital Clean View104
MPEG Noise Filter104
HDMI Black Level105
Film Mode105
Motion Plus106
Dynamic Backlight106
Picture Size107
Picture Size107
Position
108
Zoom/Position
108
Resolution109
Auto Adjustment110
PC Screen Adjustment110
Colour Temperature98
Picture Off111
White Balance99
2 Point99
10 Point99
Reset Picture111
Gamma100
OnScreen Display
Calibrated value100
Advanced Settings101
Dynamic Contrast102
Black Tone102
Flesh Tone102
RGB Only Mode102
Colour Space102
Motion Lighting102
PIP112
PIP Settings
112
Display Orientation113
Onscreen Menu Orientation113
Source Content Orientation113
Aspect Ratio113
Screen Protection114
3
Table of contents
Auto Protection Time114
Screen Burn Protection114
Message Display117
Source Info117
No Signal Message117
MDC Message117
Download Status Message117
Menu Language118
Reset OnScreen Display118
Network
Network Status124
Network Settings124
Network type124
Network Settings (Wired)
125
Network Setting (Wireless)
127
WPS(PBC)129
Wi-Fi Direct130
Multimedia Device Settings130
Sound Adjustment
Sound Mode119
Sound Effect120
Virtual Surround120
Dialog Clarity120
Equaliser120
Screen Mirroring131
Screen Mirroring131
Server Network Settings131
Connect to server131
MagicInfo Mode131
Server Access131
FTP Mode131
Device Name132
HDMI Sound121
Sound on Video Call121
Dolby Digital Comp122
Speaker Settings122
Sound Output122
Auto Volume123
Reset Sound123
System
Accessibility133
Menu Transparency133
High Contrast133
Enlarge133
Setup134
Initial settings (System)134
Touch Control135
Touch Control Lock135
Admin Menu Lock135
Device to Control135
Time136
Clock Set136
DST136
Sleep Timer136
Power On Delay136
Auto Source Switching137
Auto Source Switching137
Primary Source Recovery137
Primary Source137
Secondary Source137
Power Control138
Auto Power On
138
PC module power
138
Max. Power Saving
138
Standby Control139
Power Button139
Network Standby139
Eco Solution140
Energy Saving140
Eco Sensor140
Screen Lamp Schedule141
No Signal Power Off141
Auto Power Off141
Temperature Control142
Device Manager143
4
Table of contents
Keyboard Settings143
Mouse Settings144
Pointer Settings145
Play via146
Change PIN146
Security147
Safety Lock147
Button Lock147
USB Auto Play Lock
148
Mobile Connection Lock
148
Support
Software Update157
Update now157
Auto update157
Contact Samsung157
Supported Subtitle and Media play file
formats167
Subtitle
167
Supported image resolutions
167
Supported music file formats
168
Supported Video Formats
168
Go to Home157
Reset All157
General149
Smart Security149
BD Wise150
Anynet+ (HDMI-CEC)151
Troubleshooting for Anynet+
153
HDMI Hot Plug155
DivX® Video On Demand155
Game Mode155
Playing photos, videos and
music (Media Play)
Reset System156
Features provided in the media content list
page162
Menu items in the media content list page 163
Read the following before using media play
with a USB device
158
Using a USB device
160
Playing media content from a PC/mobile
device
161
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Centre
Testing the Product
Checking the Resolution and Frequency
Check the followings.
170
170
170
171
Q & A
178
Specifications
General180
Preset Timing Modes
182
Available buttons and features during photo
playback164
Available buttons and features during video
playback165
Available buttons and features during music
playback166
5
Table of contents
Appendix
Responsibility for the Pay Service
(Cost to Customers)
Not a product defect
A Product damage caused by customer's
fault
Others
Optimum Picture Quality and Afterimage
Burn-in Prevention
Optimum Picture Quality
Prevention of Afterimage Burn-in
184
184
184
184
185
185
185
Licence187
Terminology188
6
Chapter 01
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2016 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
•• An administration fee may be charged if either
–– (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
–– (b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
•• The amount of such administration charge will be advised to you before any work or home visit is carried
out.
7
Safety Precautions
Caution
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
――Take the following steps when cleaning.
――The following images are for reference only. Real-life situations may differ from what is
shown in the images.
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
――Hold the power cable by the plug and do not touch the cable with
wet hands. Otherwise, an electric shock may result.
This symbol indicates that high voltage is present inside.
3
It is dangerous to make any kind of contact with any internal part of this product.
Wipe the product with a clean, soft and dry cloth.
•• Do not use detergents that contain alcohol, solvent
or surface-active agents.
This symbol alerts you that important literature concerning operation and maintenance has
been included with this product.
!
•• Do not spray water or detergent directly on the
product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
4
Wet a soft and dry cloth in water and wring thoroughly to clean
the exterior of the product.
Caution
Personal injury or damage to properties may result if instructions are not followed.
5
Connect the power cord to the product when cleaning is
finished.
Activities marked by this symbol are prohibited.
6
Power on the product and computer.
Instructions marked by this symbol must be followed.
8
Storage
Connect the power plug to a grounded power socket (type 1 insulated
devices only).
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create
white-coloured stains on the product.
――Contact Customer Service Centre if the inside of the product needs cleaning (service fee will
•• An electric shock or injury may result.
!
Do not bend or pull the power cord with force. Be careful not to leave
the power cord under a heavy object.
be charged).
Electricity and Safety
•• Damage to the cord may result in a fire or electric shock.
――The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Do not place the power cord or product near heat sources.
•• A fire or electric shock may result.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•• An electric shock or fire may result.
Clean any dust around the pins of the power plug or the power socket
with a dry cloth.
•• A fire may result.
Do not use multiple products with a single power socket.
•• Overheated power sockets may cause a fire.
!
Do not touch the power plug with wet hands. Otherwise, an electric
shock may result.
Insert the power plug all the way in so it is not loose.
•• An unsecure connection may cause a fire.
!
9
Installation
Caution
Do not disconnect the power cord while the product is being used.
•• The product may become damaged by an electric shock.
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON
TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT
SOURCES.
Only use the power cord provided with your product by Samsung. Do
not use the power cord with other products.
•• A fire may result.
•• A fire or electric shock may result.
Have a technician install the wall-mount hanger.
!
•• Installation by an unqualified person can result in an injury.
Keep the power socket where the power cord is connected
unobstructed.
•• Only use approved cabinets.
!
•• The power cord must be disconnected to cut off power to the
product when an issue occurs.
!
Do not install the product in poorly ventilated spaces such as a
bookcase or closet.
•• Note that the product is not completely powered down by using
only the power button on the remote.
•• An increased internal temperature may cause a fire.
Hold the plug when disconnecting the power cord from the power
socket.
Install the product at least 10 cm away from the wall to allow
ventilation.
•• An electric shock or fire may result.
•• An increased internal temperature may cause a fire.
!
!
Keep the plastic packaging out of the reach of children.
•• Children may suffocate.
!
10
Do not install the product on an unstable or vibrating surface
(insecure shelf, sloped surface, etc.)
Caution
•• The product may fall and become damaged and/or cause an
injury.
•• Using the product in an area with excess vibration may damage
the product or cause a fire.
Do not drop the product while moving.
•• Product failure or personal injury may result.
!
Do not install the product in a vehicle or a place exposed to dust,
moisture (water drips, etc.), oil, or smoke.
Do not set down the product on its front.
•• The screen may become damaged.
•• A fire or electric shock may result.
!
Do not expose the product to direct sunlight, heat, or a hot object
such as a stove.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•• The product lifespan may be reduced or a fire may result.
•• The product may fall and become damaged and/or cause an
injury.
•• Install the product only on cabinets or shelves of the right size.
Do not install the product within the reach of young children.
Set down the product gently.
•• The product may fall and injure children.
•• Product failure or personal injury may result.
•• As the front is heavy, install the product on a flat and stable
surface.
!
Edible oil, such as soybean oil, can damage or deform the product. Do
not install the product in a kitchen or near a kitchen counter.
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of
fine dust, chemical substances, extreme temperatures or a significant
presence of moisture, or a place where the product will operate
continuously for an extended period of time) may seriously affect its
performance.
•• Be sure to consult Samsung Customer Service Centre if you want
to install the product at such a place.
11
Operation
Do not leave heavy objects or items that children like (toys, sweets,
etc.) on top of the product.
•• The product or heavy objects may fall as children try to reach for
the toys or sweets resulting in a serious injury.
Warning
There is a high voltage inside the product. Never disassemble, repair
or modify the product yourself.
During a lightning or thunderstorm, power off the product and
remove the power cable.
•• A fire or electric shock may result.
•• A fire or electric shock may result.
•• Contact Samsung Customer Service Centre for repairs.
!
Before moving the product, turn off the power switch and disconnect
the power cable and all other connected cables.
Do not drop objects on the product or apply impact.
•• A fire or electric shock may result.
•• Damage to the cord may result in a fire or electric shock.
!
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung
Customer Service Centre.
Do not move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a
damaged cable.
•• An electric shock or fire may result.
!
Do not let children hang from the product or climb on top of it.
If a gas leakage is found, do not touch the product or power plug.
Also, ventilate the area immediately.
•• Children may become injured or seriously harmed.
•• Sparks can cause an explosion or fire.
!
If the product is dropped or the outer case is damaged, turn off the
power switch and disconnect the power cord. Then contact Samsung
Customer Service Centre.
•• Continued use can result in a fire or electric shock.
GAS
Do not lift or move the product by pulling the power cord or any
cable.
•• Product failure, an electric shock or fire may result from a
damaged cable.
12
Do not use or keep combustible spray or an inflammable substance
near the product.
Caution
•• An explosion or fire may result.
Leaving the screen fixed on a stationary image for an extended period
of time may cause afterimage burn-in or defective pixels.
!
Ensure the vents are not blocked by tablecloths or curtains.
•• Activate power-saving mode or a moving-picture screen saver if
you will not be using the product for an extended period of time.
!
•• An increased internal temperature may cause a fire.
-_100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or
objects that burn easily (paper, matches, etc) into the product (via the
vent or input/output ports, etc).
•• Dust accumulation combined with heat can cause a fire, electric
shock or electric leakage.
!
Use the product at the recommended resolution and frequency.
•• Be sure to power off the product and disconnect the power
cord when water or other foreign substances have entered the
product. Then contact Samsung Customer Service Centre.
•• Product failure, an electric shock or fire may result.
Disconnect the power cord from the power socket if you do not plan
on using the product for an extended period of time (vacation, etc).
•• Your eyesight may deteriorate.
!
Do not hold the product upside-down or move it by holding the stand.
Do not place objects containing liquid (vases, pots, bottles, etc) or
metallic objects on top of the product.
•• The product may fall and become damaged or cause an injury.
•• Be sure to power off the product and disconnect the power
cord when water or other foreign substances have entered the
product. Then contact Samsung Customer Service Centre.
•• Product failure, an electric shock or fire may result.
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
!
Do not use humidifiers or stoves around the product.
•• A fire or electric shock may result.
13
Rest your eyes for more than 5 minutes for every 1 hour of product
use.
Be careful that children do not place the battery in their mouths
when removed from the remote control. Place the battery in a
location that children or infants cannot reach.
•• Eye fatigue will be relieved.
•• If children have had the battery in their mouths, consult your
doctor immediately.
!
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
When replacing the battery, insert it with the right polarity (+, -).
Store small accessories out of the reach of children.
Use only the specified standardized batteries, and do not use a new
battery and a used battery at the same time.
!
•• Otherwise, the battery may become damaged or it may cause
fire, personal injury or damage due to leakage of the internal
liquid.
!
Exercise caution when adjusting the product angle or stand height.
The batteries (and rechargeable batteries) are not ordinary refuse
and must be returned for recycling purposes. The customer is
responsible for returning the used or rechargeable batteries for
recycling.
•• Your hand or finger may get stuck and injured.
!
•• Tilting the product at an excessive angle may cause the product
to fall and an injury may result.
Do not place heavy objects on the product.
•• Otherwise, the batteries may be damaged or cause fire, personal
injury or damage due to a leakage of the internal liquid.
!
•• The customer can return used or rechargeable batteries to a
nearby public recycling centre or to a store selling the same
type of the battery or rechargeable battery.
•• Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too
high.
•• Having the sound too loud may damage your hearing.
14
Chapter 02
Preparations
Checking the Components
Components
–– Contact the vendor where you
purchased the product if any
components are missing.
–– The appearance of the components
may differ from the images shown.
–– A stand is not provided with the
product. To install a stand, you can
purchase one separately.
Quick Setup Guide
Warranty card
(Not available in some locations)
Regulatory guide
Power cord
–– The RS232C adapter can be used to
connect to another monitor using the
D-SUB (9-pin) type RS232C cable.
FREEZE
FRAME
QUICK
MENU
ON/OFF
HDMI
IN
3
TOUCH
OUT
POWER
Leclanche type dry cells (x 2, for
the remote control)
Remote Control
RS232C(IN) adapter
Tray
(Not available in some locations)
15
Screw (M4L10, 8 EA)
OCM cable
USB cable
Stereo cable
Holder-Ring (4 EA)
16
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice
Parts
to improve quality.
Panel Key
Control Panel
Buttons
Description
Power on the product.
If you press the button when the product is turned on, the control menu
will be displayed.
――To exit the OSD menu, press and hold the panel key for at least one second.
POWER
POWER
Move to the upper or lower menu. You can also adjust the value of an option.
Move to the left or right menu.
――You can adjust the volume by moving the panel key left or right when the
Speaker
control menu is not displayed.
Remote sensor
Panel Key
Press a button on the remote control pointing at the sensor on the front of
the product to perform the corresponding function.
――Using other display devices in the same space as the remote control of this
product can cause the other display devices to be inadvertently controlled.
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30 from the left and right.
――Store used batteries out of reach of children and recycle.
――Do not use a new and used battery together. Replace both batteries at the same time.
――Remove batteries when the remote control is not to be used for an extended period of time.
Remote sensor
17
――If you press the
button on the panel key when the product is turned
on, the control menu will be displayed.
Buttons
Description
Select the connected input source.
Control menu
Source
Move the panel key right to select Source
in the control menu. When the
list of input sources is displayed, move the panel key left or right to select
the desired input source. Next, press the panel key.
Display the OSD menu.
Menu
Home
Move the panel key left to select Menu
in the control menu. The OSD
control screen will appear. Move the panel key right to select the desired
menu. You can select a sub-menu item by moving the panel key up, down,
left, or right. To change settings, select the desired menu and press the panel
key.
Enter Go to Home mode.
Move the panel key up to select Home
in the control menu.
Power off the product.
Return
Power off
Move the panel key down to select Power off
press the panel key.
Return
Exit the control menu.
in the control menu. Next,
18
Reverse Side
Port
――The colour and shape of parts may differ from what is shown.
RS232C IN
Specifications are subject to change without notice to improve quality.
Description
Connects to MDC using an RS232C adapter.
RS232C OUT
IR IN
Supplies power to the external sensor board or receives the light sensor signal.
RGB / DVI / HDMI / AUDIO IN
Receives sound from a PC via an audio cable.
AUDIO OUT
Connects to the audio of a source device.
USB
Connect to a USB device.
DVI IN / MAGICINFO IN
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network box
(sold separately).
HDMI IN 1 / HDMI IN 2
Connects to a source device using an HDMI cable.
TRAY IN
Connects to the Tray, found on the front of the product, using the OCM cable.
RGB IN
Connects to a source device using a D-SUB cable.
TOUCH OUT
Connects the Touch to a PC.
FREEZE FRAME IN
Connects to the Tray, found on the front of the product, using the stereo cable.
RJ45
Connects to MDC using a LAN cable.
IR IN
RGB / DVI /
HDMI /
AUDIO IN
USB
POWER
USB
DVI IN /
MAGICINFO IN
HDMI IN 2
TRAY IN
RGB IN
TOUCH
OUT
FREEZE
FRAME IN
RJ45
HDMI IN 1
19
Buttons & Port
Tray
――The colour and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
Description
FREEZE FRAME
Pause the screen.
QUICK MENU
View menus of the display device.
POWER ON/OFF
Turns the product on or off.
Connect to a USB memory device.
TOUCH OUT
――Push up the upper part of the USB port cover.
QUICK MENU
POWER ON/OFF
Connects to a source device using an HDMI cable.
TOUCH OUT
Connects the Touch to a PC.
TRAY OUT
Connect the OCM cable to the tray and the TRAY IN port on the product.
FREEZE FRAME OUT
Connect the Stereo cable to the tray and the FREEZE FRAME IN port on the product.
HDMI IN 3
FREEZE FRAME
HDMI IN3
TRAY OUT
FREEZE FRAME
OUT
20
Installing the Tray
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
POWER
POWER
FRE
EZE
FRAME
FREEZE OUT
OUT
FRA
ME
QUIC
K MEN
U
POW
ER ON/O
FF
HD
MI
IN
3
TO
UC
H
OU
T
TRAY
――When attaching the Tray, use the screws that came with the package.
Do not fasten the screws with excessive force. The product may get damaged.
――IR touch input may malfunction if the device is exposed to direct or reflected sun light or other bright light.
When installing the monitor, avoid locations with nearby metal halide, incandescent or halogen lamps, and locations near sunlit windows.
21
Using the touch function
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
POWER
1
HDMI
IN 3
TOUCH
OUT
2
OCM cable
HDMI
IN 3
TOUCH
OUT
3
Stereo cable
PC Touch cable
HDMI
IN 3
TOUCH
OUT
1
Connect the OCM cable to the tray and the TRAY IN port on the product.
2
Connect the Stereo cable to the tray and the FREEZE FRAME IN port on the product.
3
To use the touch function with a Network box (sold separately) or computer connected to the product, use the PC Touch cable to connect the TOUCH
OUT port on the product to the USB port on the Network box or computer.
22
Plug In Module (Sold separately)
Anti-theft Lock
――The colour and shape of parts may differ from what is shown. Specifications are subject to
――An anti-theft lock allows you to use the product securely even in public places.
change without notice to improve quality.
――The locking device shape and locking method depend on the manufacturer. Refer to the user
PIM Slot
guide provided with your anti-theft locking device for details.
――The following images are for reference only. Real-life situations may differ from what is
shown in the images.
To lock an anti-theft locking device:
POWER
To use Plug In Module, make sure you connect a Samsung PIM (sold separately).
To connect a device made by another manufacturer, ensure the device is compatible with Open
Pluggable Specification (OPS) standards.
――For details on how to connect a device, refer to the user manual provided with the PIM upon
purchase.
――To obtain optimum audio quality, configure the HDMI audio settings using the Windows
Control Panel on the OPS device. For products made by other manufacturers, this only applies
to HDMI compatible devices.
――To enable sound output from the product with an OPS device that does not support HDMI,
configure the analogue audio settings using the Windows Control Panel, go to Plug In Module
> Edit Name and set the input source to PC, DVI PC or DVI.
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
–– An anti-theft locking device can be purchased separately.
–– Refer to the user guide provided with your anti-theft locking device for details.
–– Anti-theft locking devices can be purchased at electronics retailers or online.
23
Remote Control
――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
――A button without a description in the image below is not supported on the product.
POWER
OFF
Power on the product.
.QZ
ABC
DEF
GHI
JKL
MNO
PRS
TUV
WXY
DEL-/--
SYMBOL
1
4
7
Adjust the volume.
Change the input source.
Display or hide the onscreen display menu, or
return to the previous menu.
2
5
8
0
3
6
MENU
SOURCE
HOME
Number buttons
Enter the password in the OSD menu.
9
CH LIST
Mute the sound.
MUTE
VOL
Power off the product.
CH
MagicInfo
Player I
Unmuting the sound: Press MUTE again or
press the volume control(+ VOL -) button.
–– Remote control button functions
may differ for different products.
Use this hotkey to directly access MagicInfo.
This hotkey is available when a network box
or PIM (Plug In Module) is connected.
Go to Home Launch Button.
24
Quickly select frequently used functions.
TOOLS
INFO
Display information about the current input
source.
Move to the upper, lower, left or right menu,
or adjust an option's setting.
Confirm a menu selection.
Return to the previous menu.
It sets safe lock function.
If multiple products are connected through the
Video Wall feature, press the SET button and
enter a product ID using the number buttons.
Control the product using the remote control.
Cancel a value that has been set using the SET
button and control all connected products
using the remote control.
RETURN
EXIT
PC
DVI
HDMI
DP
A
B
C
D
UNSET
LOCK
Exit the current menu.
Manually select a connected input source
from PC, DVI or HDMI.
IR control
SET
Used in Anynet+ mode and multimedia
mode.
–– Remote control button functions
may differ for different products.
To place batteries in the remote control
25
Before Installing the Product
(Installation Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation
instructions.
•• Ensure that an authorized installation company installs the wall mount.
•• Otherwise, it may fall and cause personal injury.
•• Make sure to install the specified wall mount.
――Contact Samsung Customer Service Centre for further details.
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35 C
A
•• When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and
wall surface for ventilation and ensure that the ambient A temperature is kept below 35 C.
B
Figure 1.1 Side view
26
Figure 1.3 Side view
Installation on an Indented Wall
――Contact Samsung Customer Service Centre for further details.
B
D
D
Plane view
A Minimum 40 mm
B Minimum 70 mm
C Minimum 50 mm
A
D Minimum 50 mm
E Ambient temperature: Under 35 C
――When installing the product on an indented wall, allow at least the space specified above between the product
and wall for ventilation and ensure that the ambient temperature is kept below 35 C.
C
E
Figure 1.2 Side view
Installing the Wall Mount
Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring(1).
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the product on the wall.
1
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to
install the wall mount on your own.
27
Wall Mount Kit Specifications (VESA)
――Install your wall mount on a solid wall perpendicular to the floor. Before
attaching the wall mount to surfaces other than plaster board, please
contact your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in
severe personal injury.
•• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are
provided.
•• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
•• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
•• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
•• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
•• Always have two people mount the product on a wall.
•• Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
Model name
DM65E-BC
VESA screw hole specs (A * B) in
millimeters
400 x 400 (15.7 × 15.7)
Standard Screw
M8
Quantity
4
――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric
shock.
28
Remote Control (RS232C)
•• Pin assignment
1 2 3 4 5
5 4 3 2 1
6 7 8 9
9 8 7 6
Cable Connection
RS232C Cable
Interface
RS232C (9 pins)
Pin
TxD (No.2), RxD (No.3), GND (No.5)
Bit rate
9600 bps
Data bits
8 bit
Parity
None
Stop bit
1 bit
Flow control
None
Maximum length
15 m (only shielded type)
<Male type>
Pin
<Female type>
Signal
1
Detect data carrier
2
Received data
3
Transmitted data
4
Prepare data terminal
5
Signal ground
6
Prepare data set
7
Send request
8
Clear to send
9
Ring indicator
29
LAN Cable
•• RS232C cable
Connector: 9-Pin D-Sub to Stereo Cable
6
•• Pin assignment
3
2
1
1
1 2 3 4 5 6 7 8
-P2-
9
-P1-
5
-P1Male type
-P1-
-P2-
-P2-
Rx
3
----------
1
Tx
STEREO
Tx
2
----------
2
Rx
PLUG
Gnd
5
----------
3
Gnd
(3.5ø)
Pin No
Standard Colour
Signal
1
White and orange
TX+
2
Orange
TX-
3
White and green
RX+
4
Blue
NC
5
White and blue
NC
6
Green
RX-
7
White and brown
NC
8
Brown
NC
30
Cross LAN cable (PC to PC)
•• Connector : RJ45
Direct LAN cable (PC to HUB)
HUB
RJ45
P2
RJ45
P1
P2
P1
P1
P2
RJ45 MDC
Signal
P1
TX+
1
P2
Signal
<-------->
3
RX+
P2
Signal
TX-
2
<-------->
6
RX-
<-------->
1
TX+
RX+
3
<-------->
1
TX+
2
<-------->
2
TX-
RX-
6
<-------->
2
TX-
RX+
3
<-------->
3
RX+
RX-
6
<-------->
6
RX-
Signal
P1
TX+
1
TX-
31
Connection
•• Connection 2
――Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the
product.
•• Connection 1
RJ45
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
RJ45
OUT
•• Connection 3
RJ45
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
32
No.
Control Codes
Viewing control state (Get control command)
Header
Command
0xAA
Command type
ID
Data length
Command
0xAA
Command type
Data length
Data
1
Value
Command type
10
Video Wall On
0x84
0~1
11
Video Wall User Control
0x89
-
E.g. Power On & ID=0
Checksum
Command
No.
Value range
•• All communications take place in hexadecimals. The checksum is calculated by adding
up all values except the header. If a checksum adds up to be more than 2 digits as shown
below (11+FF+01+01=112), the first digit is removed.
0
ID
Command
Checksum
Controlling (Set control command)
Header
Command type
Command
Value range
1
Power control
0x11
0~1
2
Volume control
0x12
0~100
3
Input source control
0x14
-
4
Screen mode control
0x18
-
5
Screen size control
0x19
0~255
6
PIP on/off control
0x3C
0~1
7
Auto adjustment control (PC and
BNC only)
0x3D
0
8
Video wall mode control
0x5C
0~1
9
Safety Lock
0x5D
0~1
Header
Command
0xAA
0x11
Header
Command
0xAA
0x11
ID
ID
Data length
Data 1
1
"Power"
Data length
Data 1
1
1
Checksum
12
•• To control all devices connected by a serial cable simultaneously irrespective of IDs, set
the ID as "0xFE" and transmit commands. Commands will be executed by each device but
ACK will not respond.
33
Power control
Volume control
•• Function
A product can be powered on and off using a PC.
•• Function
The volume of a product can be adjusted using a PC.
•• Viewing power state (Get Power ON / OFF Status)
•• Viewing volume state (Get Volume Status)
Header
Command
0xAA
0x11
ID
Data length
Checksum
0
•• Setting power ON/Off (Set Power ON / OFF)
Header
Command
0xAA
0x11
ID
Header
Command
0xAA
0x12
ID
Data length
Checksum
0
•• Setting the volume (Set Volume)
Data length
Data
1
"Power"
Checksum
"Power": Power code to be set on a product.
Header
Command
0xAA
0x12
ID
Data length
Data
1
"Volume"
Checksum
"Volume": Volume value code to be set on a product. (0-100)
1: Power ON
•• Ack
0: Power OFF
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x11
"Power"
Checksum
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x11
"ERR"
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x12
"Volume"
Checksum
•• Nak
•• Nak
Command
Command
"Volume": Volume value code to be set on a product. (0-100)
"Power": Power code to be set on a product.
Header
Header
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x12
"ERR"
Checksum
"ERR" : A code showing what error has occurred.
"ERR" : A code showing what error has occurred.
34
Input source control
•• Function
The input source of a product can be changed using a PC.
Command
0xAA
0x14
ID
Data length
Command
0xAA
0x14
DisplayPort
――MagicInfo is only available with models that contain the MagicInfo function.
0
ID
0x25
respond to "Get" commands.
――This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports.
Checksum
――RF(TV), DTV are only available with models that include a TV.
•• Setting the input source (Set Input Source)
Header
HDMI2_PC
――DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only
•• Viewing input source state (Get Input Source Status)
Header
0x24
Data length
Data
1
"Input Source"
Checksum
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x14
"Input
Source"
"Input Source": An input source code to be set on a product.
0x14
PC
0x18
DVI
0x0C
Input source
0x08
Component
0x20
MagicInfo
0x1F
DVI_video
0x30
RF(TV)
0x40
DTV
0x21
HDMI1
0x22
HDMI1_PC
0x23
HDMI2
Checksum
"Input Source": An input source code to be set on a product.
•• Nak
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x14
"ERR"
Checksum
"ERR" : A code showing what error has occurred.
35
Screen mode control
•• Nak
•• Function
The screen mode of a product can be changed using a PC.
Screen mode cannot be controlled when the Video Wall function is enabled.
――This control can only be used on models that include a TV.
Command
0xAA
0x18
ID
Data length
Command
0xAA
0x18
16 : 9
0x04
Zoom
0x31
Wide Zoom
0x0B
4:3
Data length
Data
Checksum
1
"Screen Mode"
Command
0xAA
0xFF
r-CMD
Val1
3
'N'
0x18
"ERR"
Checksum
Header
Command
0xAA
0x19
ID
Data length
Checksum
0
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x19
"Screen Size"
Checksum
"Screen Size": product screen size (range: 0 – 255, unit: inch)
•• Nak
•• Ack
Header
Ack/Nak
•• Viewing the screen size (Get Screen Size Status)
"Screen Mode": A code that sets the product status
0x01
0xFF
Data length
•• Function
The screen size of a product can be changed using a PC.
0
ID
0xAA
ID
Screen size control
Checksum
•• Setting the picture size (Set Picture Size)
Header
Command
"ERR": A code showing what error has occurred
•• Viewing screen status (Get Screen Mode Status)
Header
Header
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x18
"Screen
Mode"
Checksum
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x19
"ERR"
Checksum
"ERR": A code showing what error has occurred
"Screen Mode": A code that sets the product status
36
PIP On/Off control
Auto adjustment control (PC and BNC only)
•• Function
The PIP mode of a product can be turned on or off using a PC.
•• Function
Automatically adjust the PC system screen using a PC.
――Only available on models that have the PIP function.
――The mode cannot be controlled if Video Wall is set to On.
•• Viewing auto adjustment state (Get Auto Adjustment Status)
None
――This function is not available in MagicInfo.
•• Setting auto adjustment (Set Auto Adjustment)
•• Viewing PIP on/off state (Get the PIP ON / OFF Status)
Header
Command
0xAA
0x3C
ID
Data length
Checksum
Command
0xAA
0x3C
Command
0xAA
0x3D
ID
Data length
Data
1
"Auto
Adjustment"
0
ID
Checksum
"Auto Adjustment" : 0x00 (at all times)
•• Setting PIP on/off (Set the PIP ON / OFF)
Header
Header
Data length
Data
1
"PIP"
Checksum
"PIP": A code used to turn the PIP mode of a product on or off
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3D
"Auto
Adjustment"
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3D
"ERR"
1: PIP ON
0: PIP OFF
Checksum
•• Nak
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3C
"PIP"
Checksum
Header
Command
0xAA
0xFF
ID
Checksum
"ERR": A code showing what error has occurred
"PIP": A code used to turn the PIP mode of a product on or off
•• Nak
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3C
"PIP"
Checksum
"ERR": A code showing what error has occurred
37
Video Wall Mode Control
Safety Lock
•• Function
Video Wall mode can be activated on a product using a PC.
•• Function
PC can be used to turn the Safety Lock function on or off on a product.
This control is only available on a product whose Video Wall is enabled.
This control is available regardless of whether or not the power is turned on.
•• Viewing video wall mode (Get Video Wall Mode)
Header
Command
0xAA
0x5C
ID
•• Viewing the safety lock state (Get Safety Lock Status)
Data length
Checksum
0
•• Setting the video wall (Set Video Wall Mode)
Header
Command
0xAA
0x5C
ID
Header
Command
0xAA
0x5D
ID
Data length
Checksum
0
•• Enabling or disabling safety lock (Set Safety Lock Enable / Disable)
Data length
Data
Checksum
1
"Video Wall Mode"
Header
Command
0xAA
0x5D
ID
Data length
Data
1
"Safety Lock"
"Video Wall Mode": A code used to activate Video Wall mode on a product
"Safety Lock": Safety lock code to be set on a product
1: Full
1: ON
0: Natural
0: OFF
Checksum
•• Ack
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"Video Wall
Mode"
Checksum
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5D
"Safety Lock"
Checksum
"Safety Lock": Safety lock code to be set on a product
"Video Wall Mode": A code used to activate Video Wall mode on a product
•• Nak
•• Nak
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"ERR"
Header
Command
0xAA
0xFF
Checksum
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x5D
"ERR"
Checksum
"ERR": A code showing what error has occurred
"ERR": A code showing what error has occurred
38
Video Wall On
•• Nak
•• Function
Turn Video Wall on or off on the product from your computer.
•• Get Video Wall On/Off Status
Header
Command
0xAA
0x84
ID
Data length
0xAA
0x84
ID
Data length
Data
Checksum
1
V.Wall_On
•• V.Wall_On: Video Wall code to be assigned to the product
1: Video Wall ON
•• Ack
Command
0xAA
0xFF
0xFF
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x84
ERR
Checksum
•• Function
Turn the Video Wall function on or off on the product from your computer.
•• Get Video Wall Status
Header
Command
0xAA
0x89
ID
Data length
Checksum
0
•• Set Video Wall
0: Video Wall OFF
Header
0xAA
ID
Video Wall User Control
•• Set Video Wall On/Off
Command
Command
"ERR": A code showing what error has occurred
Checksum
0
Header
Header
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x84
V.Wall_On
Checksum
Header
Command
0xAA
0x89
ID
Data length
Val1
Val2
2
Wall_Div
Wall_SNo
Checksum
Wall_Div: Video Wall Divider code assigned to the product
V.Wall_On : Same as above
39
10x10 Video Wall Model
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Off
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
1
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
0x19
0x1A
0x1B
0x1C
0x1D
0x1E
0x1F
2
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2A
0x2B
0x2C
0x2D
0x2E
0x2F
3
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x38
0x39
0x3A
0x3B
0x3C
0x3D
0x3E
0x3F
4
0x41
0x42
0x43
0x44
0x45
0x46
0x47
0x48
0x49
0x4A
0x4B
0x4C
0x4D
0x4E
0x4F
5
0x51
0x52
0x53
0x54
0x55
0x56
0x57
0x58
0x59
0x5A
0x5B
0x5C
0x5D
0x5E
0x5F
6
0x61
0x62
0x63
0x64
0x65
0x66
0x67
0x68
0x69
0x6A
0x6B
0x6C
0x6D
0x6E
0x6F
7
0x71
0x72
0x73
0x74
0x75
0x76
0x77
0x78
0x79
0x7A
0x7B
0x7C
0x7D
0x7E
N/A
8
0x81
0x82
0x83
0x84
0x85
0x86
0x87
0x88
0x89
0x8A
0x8B
0x8C
N/A
N/A
N/A
9
0x91
0x92
0x93
0x94
0x95
0x96
0x97
0x98
0x99
0x9A
0x9B
N/A
N/A
N/A
N/A
10
0xA1
0xA2
0xA3
0xA4
0xA5
0xA6
0xA7
0xA8
0xA9
0xAA
N/A
N/A
N/A
N/A
N/A
11
0xB1
0xB2
0xB3
0xB4
0xB5
0xB6
0xB7
0xB8
0xB9
N/A
N/A
N/A
N/A
N/A
N/A
12
0xC1
0xC2
0xC3
0xC4
0xC5
0xC6
0xC7
0xC8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
13
0xD1
0xD2
0xD3
0xD4
0xD5
0xD6
0xD7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
14
0xE1
0xE2
0xE3
0xE4
0xE5
0xE6
0xE7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
15
0xF1
0xF2
0xF3
0xF4
0xF5
0xF6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
40
Wall_SNo: Product Number code assigned to the product
10x10 Video Wall Model : ( 1 ~ 100)
Set Number
Data
1
0x01
2
0x02
...
...
99
0x63
100
0x64
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
Val2
4
'A'
0x89
Wall_Div
Wall_SNo
Checksum
•• Nak
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x89
ERR
Checksum
"ERR": A code showing what error has occurred
41
Chapter 03
Using a touchscreen monitor
Touchscreen monitor
Control a PC by tapping the screen instead of using an input device such as a keyboard or mouse.
The touch screen functions by detecting a minute electric current that runs through your body
(capacitive). Make sure to use the surface of your finger tip when tapping the screen.
•• To control the OSD menu by touch input
――From the menu screen, select System → Touch Control → Device to Control → Samsung
SMART Signage.
•• To control the screen of a PC connected to the product by touch input
――From the menu screen, select System → Touch Control → Device to Control → Connected
Source Device.
――In this mode, the OSD menu on the product can only be controlled by the remote control.
Read below before using the product
•• Take extra care to ensure an electrical substance does not contact the screen. The screen
may not function properly if there is static.
•• Do not press hard on the touch screen with your finger tip. Do not use a sharp object when
tapping the screen. The screen may break or get damaged.
•• Do not tap the screen while wearing a glove, with a dirty finger, or using something sharp
such as your fingernail or a ballpoint pen. The screen may not function properly.
•• Take extra care to ensure the screen does not contact moisture. The touch sensor may not
function properly.
•• Displaying a still image on the screen for an extended period of time may cause after
images (screen degradation) or stains. Switch off the screen when not in use.
42
Requirements
Compatible operating systems
OS
Windows
Mouse
(Single)
Win 8.1
O
Digitizer
(Multi)
O
Gestures
O
Plug & Play
O
OS
Linux
Mouse
(Single)
Ubuntu
Win8
Professional
32/64bit
O
O
O
O
O
O
O
O
O
O
O
O
Enterprise
O
O
O
O
Professional
O
O
O
O
Home premium
O
O
O
O
Home Basic
O
X
X
O
Starter
O
X
X
O
O
X
X
O
Home
O
X
X
O
Win7
O
X
X
O
Enterprise
Win7
Win XP
Embedded
Mac OS X
Ultimate
Professional
32/64bit
32/64bit
Win XP
32/64bit
O
X
X
O
Lion
10.7.5
-
X
X
X
X
X
X
12.10
O
O
X
X
14.04
O
O
X
X
15
O
X
X
X
16
O
O
X
X
19
O
O
X
X
20
O
O
X
X
11.4
O
X
X
X
12.1
O
O
X
X
12.2
O
O
X
X
12.3
O
O
X
X
CentOS
6.6
O
X
X
X
Mint
14.1
O
O
X
X
SoC touch
Kernel: 3.4.47
O
O
Mountain Lion
10.8.5
-
X
X
X
X
Mavericks
10.9.1
-
X
X
X
X
OpenSUSE
VD Linux
Plug & Play
X
Fedora
32/64bit
Gestures
O
(3.16.1)
10.04
Digitizer
(Multi)
-
X
43
Connecting the touchscreen monitor
Connecting to a PC
1
Connecting the devices using a HDMI cable
Connect your PC to the product using a D-SUB, HDMI or HDMI-DVI cable.
――Connecting parts may differ in different products.
POWER
HDMI IN
Connecting the devices using a D-SUB cable
Connecting the devices using a HDMI-DVI cable
POWER
POWER
RGB IN
HDMI IN
44
2
Connect the power cable from the product to the power outlet.
Connecting to a laptop or tablet PC
3
After the power supply is connected, the product automatically detects and switches to the
A laptop or tablet PC can be connected to the product using the same method when connecting
a desktop PC.
connected input source.
――If the screen appears blank, turn the product off and then on again.
4
Connect the TOUCH OUT port on the product to a USB port on the PC using the USB 2.0
upstream cable.
――The USB 2.0 upstream cable is sold separately.
•• If touchscreen control is not available after the devices are connected
――Make sure to connect the D-SUB, HDMI or HDMI-DVI cable before connecting the USB 2.0
upstream cable.
――If touchscreen control is still unavailable after the cables are connected properly,
disconnect the USB 2.0 upstream cable and then connect it again.
――The USB 2.0 upstream cable is sold separately.
POWER
TOUCH OUT
45
Configuring the touchscreen monitor settings
To properly use the touch function of the product in Windows, go to Tablet PC Settings and calibrate the product.
――First connect the touchscreen monitor before configuring the following settings.
――The maximum number of touchscreen monitors that can be connected simultaneously varies, depending on the operating system and graphics card settings.
Calibrating a monitor
Go to Tablet PC Settings using the appropriate method according to the system configuration as shown below.
Accessing via Tablet PC Settings in Windows 7
Go to Control Panel Tablet PC Settings. (Calibrate the product by referring to "Calibration" on page 47.)
――If Tablet PC Settings is not found in the Control Panel, search for Tablet PC Settings from Search Control Panel.
Accessing via Tablet PC Settings in Windows 8
Go to Settings Control Panel Tablet PC Settings. (Calibrate the product by referring to "Calibration" on page 47.)
――If Tablet PC Settings is not found in the Control Panel, search for Tablet PC Settings from Search Control Panel.
46
Calibration
――Instructions below are for Windows 8. The same method applies to both Windows 7, Windows 8 and Windows 10.
――After changing the Picture Size from the OSD menu, you may need to calibrate the picture settings again.
――In the occurrence of an error during calibration, go to Tablet PC Settings
1
In the Display tab, select Setup under Configure.
the Display tab. Tap Reset, and calibrate again.
2
Tap the page displayed on the product with your finger.
――In dual monitor mode: If the following page does not appear on the product, press the Enter
key to display the page.
Touch this screen to identity it as the touchscreen.
If this is not the Tablet PC screen, press Enter to move to the next screen. To close the tool, press Esc.
47
3
Select the product from Display under Display options. Next, select Calibrate.
5
After calibration is complete, the message Do you want to save the calibration data?
appears. Select Yes to save changes.
Digitizer Calibration Tool
Do you want to save the calibration data?
Yes
6
No
The touchscreen monitor has been calibrated successfully.
――Selecting Reset will remove the calibration data.
4
Perform calibration following the onscreen instructions displayed as shown in the image.
To provide calibration samples, tap the crosshair each
time that it appears on the screen.
Right-click anywhere on the screen to return to the
last calibration point. Press the Esc button to close
the tool. Do not change your screen orientation until
you have completed the calibration process.
48
Controlling the screen
Drag
Touchscreen gestures
Using touchscreen gestures is similar to using a mouse.
Tap
Lightly touch and drag in any direction on the screen.
Use this gesture to move in a specific direction on a web page, map or photo.
――It is similar to dragging a mouse.
Double tap
Lightly tap the screen.
Use this gesture to select a feature or menu item.
――It is similar to clicking on a mouse.
Tap the screen twice.
Use this gesture to run the selected programme.
――It is similar to double-clicking on a mouse.
49
Flick
Notes
•• To increase the touch input accuracy, enlarge the font or icons.
•• In touchscreen control mode, use of the remote control when precise clicks or inputs are
required is more effective.
Flick your finger on the screen as shown in the image.
Use this gesture to go to the previous or next picture or web page.
Zoom in/out
Spread or pinch your fingers on the screen as shown in the image.
Use these gestures to zoom in or out respectively on a web page, map or photo.
50
――Touching and holding on the screen when the product is turned on
displays the administrator menu.
――If touchscreen control is not available
From the menu screen, use the remote control to go to System → Touch
Control → Touch Control Lock and select Off.
――If the administrator menu is not displayed
From the menu screen, use the remote control to go to System → Touch
Control → Admin Menu Lock and select Off.
Administrator menu
Buttons
Description
Volume
Adjust the Volume.
――Select Volume
from the administrator menu.
Home
Enter Home mode.
――Select Home
from the administrator menu.
Tools
Display Tools.
――Select Tools
from the administrator menu.
Display the OSD menu.
Menu
To change settings, select a menu item.
――Select Menu
from the administrator menu.
Select the connected input source.
Source
Power off
Select an input source from the displayed list of input sources.
――Select Source
from the administrator menu.
Power off the product.
――Select Power off
from the administrator menu.
51
Chapter 04
Connecting and Using a Source Device
Before Connecting
Pre-connection Checkpoints
――Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
――Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
Connecting to a PC
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
――Connecting parts may differ in different products.
――Connect the sound ports correctly: left = white and right = red.
Connection using the D-SUB cable (Analogue type)
――Check the types of ports at the back of the product you want to connect.
――The appearance may differ depending on the product.
――The appearance may differ depending on the product.
POWER
RGB IN
RGB / DVI / HDMI / AUDIO IN
52
Connection using a DVI cable (Digital type)
Connection Using an HDMI-DVI Cable
――The appearance may differ depending on the product.
――The appearance may differ depending on the product.
After connecting a computer to the product with an HDMI-DVI cable, make sure to configure the
settings as shown below to enable the video and audio from the computer.
•• Sound → set HDMI Sound to PC(DVI)
•• Picture → set each screen mode to Text under Picture Mode
POWER
•• System → General → set HDMI Hot Plug to Off
DVI IN /
MAGICINFO IN
POWER
RGB / DVI / HDMI / AUDIO IN
HDMI IN
RGB / DVI / HDMI / AUDIO IN
――You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
POWER
HDMI
DVI IN /
MAGICINFO IN
53
Connection Using an HDMI Cable
――The appearance may differ depending on the product.
POWER
HDMI IN
54
Connecting to a Video Device
――The appearance may differ depending on the product.
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• You can connect a video device to the product using a cable.
――Connecting parts may differ in different products.
――If using the remote control, connect an external device and press SOURCE on the remote
control to select the device.
――If using touchscreen control mode, connect an external device. Next, touch and hold on
the screen when the product is turned on to display the administrator menu. Select Source
from the administrator menu.
Connection Using an HDMI-DVI Cable
POWER
HDMI IN
――The appearance may differ depending on the product.
――Audio will not be enabled if the product is connected to a video device using an HDMI-DVI
cable. To resolve this, additionally connect an audio cable to the audio ports on the product
and video device.
――After connecting a video device to the product with an HDMI-DVI cable, make sure to
RGB / DVI / HDMI / AUDIO IN
configure the settings as shown below to enable the video and audio from the video device.
――Sound → set HDMI Sound to AV(HDMI)
――Picture → set each screen mode to Videos/Images under Picture Mode
――System → General → set HDMI Hot Plug to On
――Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
POWER
HDMI
DVI IN /
MAGICINFO IN
55
Connection Using an HDMI Cable
――The appearance may differ depending on the product.
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
Connecting to an Audio System
――The appearance may differ depending on the product.
――Connecting parts may differ in different products.
•• For better picture and audio quality, connect to a digital device using an HDMI cable.
•• An HDMI cable supports digital video and audio signals, and does not require an audio
cable.
–– To connect the product to a digital device that does not support HDMI output, use an
HDMI-DVI and audio cables.
•• The picture may not display normally (if at all) or the audio may not work if an external
device that uses an older version of HDMI mode is connected to the product. If such a
problem occurs, ask the manufacturer of the external device about the HDMI version and,
if out of date, request an upgrade.
POWER
AUDIO OUT
•• Be sure to use an HDMI cable with a thickness of 14 mm or less.
•• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
•• A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
POWER
HDMI IN
56
Connecting the LAN Cable
――The appearance may differ depending on the product.
――Connecting parts may differ in different products.
POWER
RJ45
•• Use Cat7(*STP Type) cable for the connection.
*Shielded Twist Pair.
57
Changing the Input source
Source allows you to select a variety of sources and change source device names.
Source
device.
――If using touchscreen control mode, connect an external device. Next, touch and hold on the screen when the
Using the remote control
from the administrator menu.
product is turned on to display the administrator menu. Select Source
――The screen may not display correctly if an incorrect source is selected for the source device you want to convert
•• SOURCE → Source
to.
――On the Source screen, press TOOLS on the remote control. Alternatively, tap Options at the top right of the
Using touchscreen control mode
•• Administrator menu → Source
→ Source
Source
MagicInfo S
screen. Detailed information on the connected external device is displayed.
Options
MagicIWB S
PC
You can display the screen of a source device connected to the product. Select a source from source list to display
the screen of the selected source.
――If using the remote control, connect an external device and press SOURCE on the remote control to select the
HDMI1
HDMI2
HDMI3
To see available options, tap Options at the top right corner of the screen.
Edit Name
Using the remote control
•• SOURCE → Source → TOOLS → Edit Name → ENTER E
Using touchscreen control mode
•• Administrator menu → Source
→ Source → Options → Edit Name
Customize the name of a connected external device.
――The list can include the following source devices. Source devices on the list differ depending on the selected
source.
PC / Cable STB / Satellite STB / PVR STB / Game / Blu-ray / DVD / VCR / AV Receiver / Camcorder / DVI PC / DVI
Devices / TV / IPTV / HD DVD / DMA
–– The displayed image may differ depending on the model.
–– The MagicIWB S software allows you to play a variety of content on a large
touchscreen monitor. Use the software to bring life to your meetings and conferences.
To use MagicIWB S, you must purchase and attach a touch overlay to the monitor.
Touch overlays are sold separately. Refer to the user guide that came with the touch
overlay for details.
The MagicIWB S user guide can be downloaded from http://www.samsung.com/
displaysolutions.
Information
Using the remote control
•• SOURCE → Source → TOOLS → Information → ENTER E
Using touchscreen control mode
•• Administrator menu → Source
→ Source → Options → Information
You can see detailed information about the selected external device.
58
Chapter 05
Using MDC
Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC.
For details on how to use the MDC programme, refer to Help after installing the programme. The MDC programme is available on the website.
MDC Programme Installation/
Uninstallation
6
In the displayed "Destination Folder" window, select the directory path you want to
install the programme in and click "Next".
――If the directory path is not specified, the programme will be installed in the default
directory path.
Installation
――MDC installation can be affected by the graphics card, mother board and network
conditions.
1
Click the MDC Unified installation programme.
2
Select a language for installation. Next, click "OK".
3
When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click
7
install the programme in and click "Install".
8
Installation progress will be displayed.
9
Click "Finish" in the displayed "InstallShield Wizard Complete" window.
――Select "Launch MDC Unified" and click "Finish" to run the MDC programme immediately.
10 The MDC Unified shortcut icon will be created on the desktop after installation.
"Next".
4
――The MDC execution icon may not be displayed depending on the PC system or product
specifications.
――Press F5 if the execution icon is not displayed.
In the "License Agreement" window displayed, select
"I accept the terms in the license agreement" and click "Next".
5
In the displayed "Ready to Install the Program" window, check the directory path to
In the displayed "Customer Information" window, fill out all the information fields and
Uninstallation
click "Next".
1
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2
Select MDC Unified from the list and click Change/Remove.
59
Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
――The appearance may differ depending on the product.
RS232C IN
Monitor 1
POWER
RS232C OUT
RS232C IN RS232C OUT
RS232C IN
Monitor 2
Computer
60
Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable.
Connection using a direct LAN cable
――The appearance may differ depending on the product.
――Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.
POWER
Computer
RJ45
HUB
Monitor 1
Monitor 2
61
Connection using a cross LAN cable
――The appearance may differ depending on the product.
――Multiple products can be connected using the RS232C IN / OUT port on the product.
RS232C IN
Monitor 1
POWER
RS232C OUT
RJ45
RS232C OUT
RS232C IN
Monitor 2
Computer
62
Chapter 06
Home feature
This feature is provided in Support → Go to Home.
Accessible using the HOME button on the remote control.
――To use the Player feature, set Play via to MagicInfo in System.
Player
HOME
Play a range of content such as channels with schedules assigned, templates or files.
Play channels or content using any of the following methods.
→ Player → ENTER E
•• Network Channel: Play content using the server.
――To run Network Channel, make sure the product is connected to the server.
MagicInfo Player S3
•• Local Channel: Play content in internal memory or from external memory.
Player
Play a variety of content, such as
scheduled channels, templates or
files.
Schedule
Template
Clone Product
ID Settings
Video Wall
Network Status
Picture Mode
On/Off Timer
Ticker
More settings
–– The displayed image may differ depending on the model.
63
Approving a connected device from the server
3
Select Device from the top menu bar.
4
Select Lite from the menus on the left.
5
Select Unapproved from the sub-menus of Lite.
6
Select the Approve button for your device from the list of unapproved Lite devices.
Approving the Lite server
•• Set MagicInfo Mode to Lite in Server Network Settings.
Approve and use the Lite server now.
――First configure the server Network Settings before device approval.
1
2
Access the server you have assigned to your device.
Enter your ID and password to log in.
64
7
Enter the information required to approve the device.
9
When the device is approved by the server, the schedule registered in the selected group
will be downloaded to the device. The schedule will run after it is downloaded.
――For further details on how to configure a schedule, refer to the <MagicInfo Lite Server user's
manual>.
――If a device is deleted from the list of devices approved by the server, the device will reboot to
reset its settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
•• Device Name: Enter the device name.
•• Device Group: Select
1
Go to the tabs Device → Time.
2
Select your device.
3
Select Clock Set, and sync the time with the server.
to specify the group.
•• Location: Enter the current location of the device.
――Pressing the INFO button on the remote when a network schedule is running will display
the details of the schedule. Check that the correct device has been selected by viewing the
device ID in the details.
8
Select the All menu to check that the device has been registered.
•• When connecting to the server for the first time, the time on the product is set using the
GMT time of the region where the server is installed.
•• The time on the product can be changed from the server as shown in step 3.
•• Turning the product off and then on again will restore the time setting on the product to
the last time that was set from the server.
――For further details on how to manage the time (scheduling, holiday management, etc.), refer
to the <MagicInfo Lite Server user's manual>.
65
Approving the Premium server
3
Select Device from the top menu bar.
4
Select Premium from the menus on the left.
5
Select Unapproved from the sub-menus of Premium.
6
Select the Approve button for your device from the list of unapproved Premium devices.
•• Set MagicInfo Mode to Premium in Server Network Settings.
Approve and use the Premium server now.
――First configure the server Network Settings before device approval.
1
2
Access the server you have assigned to your device.
Enter your ID and password to log in.
66
7
Enter the information required to approve the device.
9
When the device is approved by the server, the schedule registered in the selected group
will be downloaded to the device. The schedule will run after it is downloaded.
――For further details on how to configure a schedule, refer to the <MagicInfo Premium Server
user's manual>.
――If a device is deleted from the list of devices approved by the server, the device will reboot to
reset its settings.
Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
•• Device Name: Enter the device name.
•• Device Group: Select
1
Go to the tabs Device → Time.
2
Select your device.
3
Select Clock Set, and sync the time with the server.
to specify the group.
•• Location: Enter the current location of the device.
――Pressing the INFO button on the remote when a network schedule is running will display
the details of the schedule. Check that the correct device has been selected by viewing the
device ID in the details.
8
Select the All menu to check that the device has been registered.
•• When connecting to the server for the first time, the time on the product is set using the
GMT time of the region where the server is installed.
•• The time on the product can be changed from the server as shown in step 3.
•• Turning the product off and then on again will restore the time setting on the product to
the last time that was set from the server.
――For further details on how to manage the time (scheduling, holiday management, etc.), refer
to the <MagicInfo Premium Server user's manual>.
67
Device : All
Player
Content : All
Sort by : File Name
Browse and play content stored on the selected device.
No channels
Network Channel
Network File
Options
1 / 4 item(s)
Network Channel
Play content, templates and schedules configured on the server.
•• You can view whether the server is connected (approval) in the Player menu screen.
To view whether the server is connected when a Network Channel is running, press INFO on the remote.
1
No channels
Local Channel
Select Network Channel from the Player menu.
――The No channels message appears if no channel has been registered in Network Channel.
My Templates
2
Network Channel will run.
Published Content
–– The displayed image may differ depending on the model.
Local Channel
Play a schedule or channel that was configured in the product.
1
Select Local Channel from the Player menu.
――The No channels message appears if no channel has been registered in Local Channel.
2
Local Channel will run.
Published Content
Play a template stored on a connected USB device.
――The Published Content feature appears only when a USB device containing templates is connected.
――Play scheduled content.
Network File
Content files included in schedules that have been downloaded through MagicInfo Server are displayed.
My Templates
Play a template in My Templates stored in the internal memory of the product.
68
Available features in the Player page
The Player list page provides the following features.
•• Device
Select either Internal or USB to search for a desired device list.
–– All / Internal / USB
•• Content
Select a content type as criterion to search for a desired content list.
–– All / Video / Image / PDF / Flash / Office / My Templates
•• Sort by
Specify the content sort criterion.
–– File name / Recently played
•• Options
Menu items in the Player page
Option Name
Operations
Play Selected
Select and play desired content.
Send
Copy content to another storage device.
Delete
Delete desired content.
Settings
Configure detailed properties of content.
――See the following page for details on the Settings feature.
69
Player page Settings menu
Default Storage
Select the storage location that you want to download scheduled channels from the network to.
Settings
•• Internal / USB
Picture Size
Settings
Set the screen size for content.
Select the storage location that you want to download scheduled
channels from the network to.
Default Storage
If Picture Size is set to Video or Image
•• Full Screen / Original Size / Fit to Screen
Internal
Picture Size
Close
Display Duration
Transition Effect
Content Orientation
Random
Landscape
If Picture Size is set to PDF or Office
•• Full Screen / Original Size
――This feature is only available for Video, Image, PDF and Office files.
Display Duration
–– The displayed image may differ depending on the model.
Set the duration for each page in a slideshow.
――This feature is only available for Image, PDF, Flash and Office files.
Transition Effect
Configure transition effects between pages or scenes in a slideshow or video file.
•• None / Fade1 / Fade2 / Blind / Spiral / Checker / Linear / Stairs / Wipe / Random
――This feature is only available for Image files.
Content Orientation
Switch the orientation of playing content to Landscape or Portrait mode.
•• Landscape / Portrait
――If Content Orientation is Portrait view, it does not support VP8 video codec.
――Source is not available when Content Orientation is set to Portrait.
70
Default content
This default content will be displayed if you run a channel while no Programmes are scheduled on the channel.
•• None / My Templates
Safely Remove
Safely removes USB memory
Reset
Restore all the values under Settings to the default when the product was purchased.
71
When Content is Running
Press the INFO button on the remote control.
•• Current time
Viewing the details of the content that is running
•• CH Number: Number assigned to the channel currently playing
――Only applicable during Network Channel / Local Channel playback.
Information
Current time:
Type:
CH Number:
CH Name:
Software Version:
•• Type : Type of channel currently playing
――Only applicable during Network Channel / Local Channel playback.
00:00
No channels selected
•• CH Name: Name of the channel currently playing
――Only applicable during Network Channel / Local Channel playback.
No channels selected
•• Software Version: Displays the software version of a device
None
B2B-EP-APP-5413-095
•• MAC ID: Displays the original identification number of a device
OK
No Schedule to download
•• Tags: Tag settings assigned to a device from the server
――Only applicable during Network Channel / Local Channel playback.
•• Server: Displays the connection status (Connected, Not connected or Not approved) of the server
•• USB: Displays the connection status of a USB device
–– The displayed image may differ depending on the model.
72
Changing the settings for the content that is
running
Press the TOOLS button on the remote control during content playback to configure settings such as Picture Mode
and Sound Mode.
•• Playlist
View a list of content items currently playing.
•• Music
Set the background music for the content currently playing.
Playlist
Music
Picture Mode
Sound Mode
Repeat
•• Picture Mode
Customizes the screen settings for the content currently playing
–– Shops & Shopping Centres / Offices & Schools / Terminals & Stations / Video Wall / Calibration
–– The displayed image may differ depending on the model.
–– This feature is not available when content is playing through Video Wall.
•• Sound Mode
Customizes the audio settings for the content currently playing
–– Standard / Music / Movie / Clear Voice / Amplify
•• Repeat
Set the repeat mode.
–– One / All
73
File Formats Compatible with Player
•• Supported file systems include FAT32 and NTFS.
•• A file with a vertical and horizontal resolution larger than the maximum resolution
cannot be played.
Check the vertical and horizontal resolution of the file.
•• Check the supported video and audio Codec types and Versions.
•• Check the supported file versions.
–– Flash player 11.0 and older and Flash Air 3.0 and older versions are supported.
–– PowerPoint version up to 97 – 2007 is supported
•• Only the last USB device that was connected is recognized.
Network Schedule Multiframe
Playback restrictions
•• A maximum of two video files (Video) can be played simultaneously.
•• For video files with vertical dimensions of 1080p or larger, only one file can be played at
a time.
•• The maximum number of 4096 x 4096-dimension image files that can be played
simultaneously from a media slide is four.
•• More than one Flash file cannot be played.
•• If an input source element is included, only one video file or media slide can be played
simultaneously.
•• In a combination of "video files + Flash files + input source elements," supported
combinations of different content files that can simultaneously play are as follows:
–– Video + Flash
–– Video + input source element
–– Flash + input source element
Sound output restrictions
•• More than one sound output cannot be used.
•• Playback priority: Flash file > network BGM > local BGM > video file in the main frame
selected by the user
――Network BGM: Settings can be configured in step 1 when creating a server schedule.
――Local BGM: BGM settings can be configured using the tools displayed after the TOOLS
button is pressed during Player playback.
――User-selected main frame: Main frame settings can be configured in step 2 when
creating a server schedule.
Template files and LFD(.lfd) files
Restrictions
•• Ensure a distributed folder (content / schedules) exists in Internal / USB memory.
Playback restrictions
•• A maximum of two video (Video) files can be played.
•• More than one Flash file cannot be played.
•• For Office files (PPT and Word files) and PDF files, only one file type is supported at a
time.
•• Multiple videos (Video) cannot be played on a single display of a video wall
simultaneously.
Sound output restrictions
•• More than one sound output cannot be used.
•• Playback priority: Flash file > network BGM > local BGM > video file in the main frame
selected by the user
•• For Office files (PPT and Word files) and PDF files, only one file type is supported at a
time.
•• LFD(.lfd) files are not supported.
74
Contents
File Extension Container
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
MP4
*.mp4
3GP
*.mov
VRO
*.3gp
VOB
*.vro
PS
*.mpg
TS
Video Codec
DivX 3.11 / 4.x / 5.x / 6.x
Resolution
1920 x 1080
Frame rate
(fps)
6~30
Bit rate
(Mbps)
30
Audio Codec
AC3
LPCM
AAC
MPEG4 SP / ASP
HE-AAC
WMA
H.264 BP / MP / HP
DD+
MPEG(MP3)
DTS Core
Motion JPEG
G.711(ALaw,μ-Law)
*.mpeg
*.ts
Window Media Video v9
*.tp
*.trp
MPEG2
*.flv
*.vob
*.svi
MPEG1
*.m2ts
*.mts
VP6
640 x 480
4
*.divx
75
Video
•• 3D video is not supported.
Audio
Image
•• Content with a resolution larger than the
resolution specified in the table above is not
supported.
•• Audio content with a Bit rate or Frame
rate larger than the rate specified
in the table above can cause choppy
audio during playback.
•• Compatible image file format : JPEG, PNG,
BMP
–– 32-bit, 24-bit and 8-bit BMP files are
supported.
•• Video content with a Bit rate or Frame rate larger
than the rate specified in the table above can
cause choppy video during playback.
•• Video content will not play, or not play
correctly, if there is an error in the
content or the container.
•• Supported maximum resolution : 4096 x
4096
•• Video content will not play, or not play correctly,
if there is an error in the content or the container.
•• Some USB/digital camera devices may
not be compatible with the player.
•• Some USB/digital camera devices may not be
compatible with the player.
•• Supports up to WMA 10 Pro 5.1
channel. WMA lossless audio is not
supported.
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and
AVCHD are not supported.
•• Supported maximum file size: 20MB
•• Supported image effects : 9 effects
(Fade1, Fade2, Blind, Spiral, Checker,
Linear, Stairs, Wipe, Random)
•• QCELP, AMR NB/WB are not
supported.
•• For all Video codecs except MVC, VP8, VP6:
–– Below 1280 x 720: 60 frame max
–– Above 1280 x 720: 30 frame max
•• GMC 2 or higher is not supported.
•• Supports only BD MVC Spec.
•• Only one video file can play at a time if video files
on the monitor use incompatible codecs or the
resolution is 1080 x 1920.
•• When a single video file is playing, Seamless
mode is not supported under the following
conditions:
–– Incompatible codec (MVC, VP3, MJPEG) ↔
Incompatible codec
–– Incompatible codec ↔ Compatible codec
–– The resolution is different from that of the
monitor
–– The frequency is different from that of the
monitor
76
Flash
Power Point
•• Flash player 11.0 and older and Flash Air 3.0
and older versions are supported.
•• Flash Animation
–– Compatible file format : SWF
•• Recommended resolution : 1280 x 720
–– Caution
Performance comparable to Flash Player
on a Windows operating system cannot
be guaranteed
Optimization is needed during content
creation
•• Flash Video
–– Compatible file format : FLV
–– Video
Codec : H.264 BP
Resolution : 1920 x 1080
–– Audio
Codec : H.264 BP
–– Caution
F4V file format is not supported
Screen Video is not supported
•• Compatible document file formats
–– Extension : ppt, pptx
–– Version : Office 97 ~ Office 2007
•• Functions not supported
–– Animation effect
–– 3D shapes (which will be displayed in
2D)
–– Header and footer (some subitems are
not supported)
–– Word Art
–– Align
A group alignment error may occur
–– Office 2007
SmartArt is not fully supported. 97 out
of 115 subitems are supported.
––
––
––
––
––
PDF
•• Compatible document file formats
–– Extension : pdf
•• Functions not supported
–– Content less than 1 pixel not supported
because of performance degradation
issue.
–– Masked Image, Tiled Image content not
supported.
–– Content with Rotated Text, not
supported.
–– 3D Shadow Effects not supported.
–– Some characters not supported
(Special characters may be corrupted)
Object insertion
Half-width characters
Letter spacing
Charts
Vertical text
some subitems are not supported
–– Slide notes and handout
77
WORD
Template files
•• Compatible document file
formats
–– Extension : .doc, .docx
–– Version : Office 97 ~ Office
2007
•• Creation/editing/playback are
only available in Template.
LFD
Streaming
•• Supported in Network
Channel and Local Channel
•• Supported streaming
protocols: mms, RTP, HTTP
•• Compatible document file
formats
–– Extension : .lfd
•• Only video content is
supported
•• Functions not supported
–– Page background effect
–– Some paragraph styles
–– Word Art
–– Align
A group alignment error
may occur
–– 3D shapes (which will be
displayed in 2D)
–– Office 2007
SmartArt is not fully
supported. 97 out of 115
subitems are supported.
––
––
––
––
Charts
Half-width characters
Letter spacing
Vertical text
some subitems are not
supported
–– Slide notes and handout
78
File Formats Compatible with Videowall
――Refer to the <MagicInfo Server user's manual> for further details.
Video
Image
•• 3D video is not supported.
•• Compatible image file format : Jpeg, bmp, png
•• Content with a resolution larger than the resolution specified in the
table above is not supported.
•• Supported maximum resolution : 15,360 x 8,640
――A higher resolution image may take longer to display on the screen.
•• Video content with a Bit rate or Frame rate larger than the rate
specified in the table above can cause choppy video during playback.
•• Video content will not play, or not play correctly, if there is an error in
the content or the container.
•• Some USB/digital camera devices may not be compatible with the
player.
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
supported.
•• For all Video codecs except MVC, VP8, VP6:
–– Below 1280 x 720: 60 frame max
–– Above 1280 x 720: 30 frame max
•• GMC 2 or higher is not supported.
•• Supports only BD MVC Spec.
•• Some codecs may not be supported in portrait playback mode.
79
Restrictions
•• Only one video (Video) file can be played per client.
――Different content files can be played on the displays of a video wall.
Two video (Video) files cannot be played on a single display of a video wall.
Available
Available
Not available
80
Schedule
Available features in the Schedule page
The Schedule page provides the following features.
HOME
→ Schedule → ENTER E
Schedule
Type : Local
Device : Internal
Options
Schedule your content on a local channel or edit existing channels.
Playing Time
[CH1]Channel 1
[CH2]Channel 2
[CH3]Channel 3
00:00
00:30
Add content to create
a programme on the
channel.
01:30
02:00
02:30
03:30
04:00
04:30
05:00
05:30
•• Device
–– Display the name of a connected storage device.
――This option only activates if Type is set to Local in Device.
•• Options
01:00
03:00
•• Type
–– Local: Add or edit schedules.
–– Network: View the network schedule configured on the server.
+ Add Programme
Schedule your content
on CH 2.
Schedule your content
on CH 3.
Configure the display
duration to set how
long each item of
content will play for.
Set a start time and
a stop time for the
programme.
Menu items in the Schedule page
Option Name
Operations
06:00
Send
Send configured schedules to another storage device. This is similar to the "copy"
feature on PCs.
Delete
Delete schedules.
81
Configuring channel schedules
Play media content such as videos, photos and music at a desired time.
1
Select a channel to configure.
2
Select video, music and photo content you want to apply to the channel schedule.
3
Set the time to play the schedule. (Start Time ~ Stop Time)
4
Change the channel schedule name, and then select a destination folder to save to.
5
Press the Save button.
――Only applicable when Type is set to Local.
Editing a channel schedule.
Change settings for a configured channel schedule such as content, the duration and the schedule name.
1
Select a channel to edit.
2
Select video, photo or music content to edit in the channel schedule.
–– Deleting content: Place the cursor over the desired content and then press the E button to delete it.
–– Move to the far right end of the content list. Click the + button to add content or change the playback order of content items.
3
Set the time to play the schedule. (Start Time ~ Stop Time)
4
Change the channel schedule name, and then select a destination folder to save to.
5
Press the Save button.
――Only applicable when Type is set to Local.
82
Template
HOME
Available features in the Template page
Create unique content using templates. It is easy to create content. Simply change images and
text in a template.
→ Template → ENTER E
Template
Market : All
Sort the template list using the following criteria.
Orientation : Landscape
Select a template to customise.
My Templates
1 / 64 item(s)
•• Market
•• Orientation
–– Landscape: Select this mode when using the product in landscape orientation.
–– Portrait: Select this mode when using the product in portrait orientation.
1
Select a template from the provided sample templates.
Create Template
Select in the editable zone to add content or edit the existing text.
–– The displayed image may differ depending on the model.
Preview
Cancel
New town
interior design
Save
Sustainble evolution unfolods tomorrw’s design
Background Screen
2
bg_co...
Background Music
Organize a template by inserting text, video, photo, or PDF files as desired.
83
Entering text
Inserting content such as videos, photos and PDF files
Create Template
Press the volume button on the remote to
change the font size.
Select in the editable zone to add content or edit the existing text.
Create Template
Select in the editable zone to add content or edit the existing text.
Edit
Item(s) selected
Select item to delete
Preview
Cancel
picture1.jpg
New town
interior design
Edit Text
Font options
Save
Sustainble evolution unfolods tomorrw’s design
Background Screen
bg_co...
Hide Element
Default content duration
00:00:05
Aspect Ratio
Mute
Done
Background Music
Edit Text
Show
Cancel
Configuring the background image/background music
Select the Edit Text window to enter text.
Font options
Font Size: Specify the text size for the message.
Font Colour: Specify the text colour for the message.
Create Template
Select in the editable zone to add content or edit the existing text.
Background Screen
Device : All
Background colour: Specify the background colour for the message.
Background opacity: Specify the background transparency for the message.
..
Alignment: Select a message alignment mode.
Scroll: Specify the scroll direction/speed for the message.
Hide Element: Display or hide a message.
――Selecting Hide does not reset the message settings.
Done
Cancel
Reset: Reset all settings in Font options to default settings.
84
3
Preview
Configure Template Name and Storage.
Save
Duration
23:59:59
Template Name
Template preview is running. It will stop after
20 seconds.
Storage
1
Preview the created template using the Preview feature.
2
To save the template, press the Save button.
Internal
Save
New town
interior design
Sustainble evolution unfolods tomorrw’s design
Template01
4
Cancel
Press the Save button to finish creating the content.
85
Clone Product
Export settings on the product to an external storage device. You can also import settings from an external storage
device.
This option is useful when assigning the same settings to several products.
HOME
→ Clone Product → ENTER E
Clone Product
When a duplicate file is not found on the external storage device
1
Connect the external storage device, then run the Clone Product function.
2
The No cloning file found on the external storage device. Export this device's settings to the external storage
device? message appears.
–– The displayed image may differ depending on the model.
When a duplicate file is found on the external storage device
1
Connect the external storage device, then run the Clone Product function.
2
The Settings file found on the external storage device. Please select an option. message appears.
Run the Import from External Storage or Export to External Storage function.
–– Import from External Storage: Copy settings saved on an external storage device to the product.
–– Export to External Storage: Copy settings on the product to an external storage device.
――After configuration is complete, the product is rebooted automatically.
86
ID Settings
HOME
→ ID Settings → ENTER E
ID Settings
Assign an ID to a set.
Device ID
Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
――Press u/d to select a number, and press E.
――Enter the number you want using the number buttons on the remote control.
PC Connection Cable
–– The displayed image may differ depending on the model.
Select a method to connect to MDC to receive the MDC signal.
•• RS232C cable
Communicate with MDC via the RS232C-stereo cable.
•• RJ-45 (LAN)/Wi-Fi Network
Communicate with MDC via the RJ45 cable.
Device ID Auto Set
This feature automatically allots an ID number to a device connected via an RS232C cable.
When multiple devices are connected, enable the feature on either the first or last device.
87
Video Wall
HOME
→ Video Wall → ENTER E
Video Wall
Customize the layout of multiple displays that are connected to form a video wall.
In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays.
To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the
MagicInfo function.
Apply to
•• Current Source (screen output from a device connected to Source): Configure videowall features for the screen
output from an external device connected to the product.
–– The displayed image may differ depending on the model.
•• MagicInfo Player S: Configure videowall features for content saved in the product or content saved on a USB
memory or SD card.
Restrictions
――Playback may be initially choppy if video files of different resolutions play successively (i.e., 1280x720 content
plays after 1920x1080 content) or an image file and a video file play one after the other.
Video
•• Supported resolution
–– 1920 x 1080 @ 24p/30p
–– 1280 x 720 @ 24p/30p/60p
•• HEVC and 3D images are not supported.
Image
•• Compatible image file format: Jpeg, png, bmp
•• Supported maximum resolution
–– jpeg: 15360 x 8640
–– png: 4096 x 4096
–– bmp: 4096 x 4096
88
Video Wall
You can activate or deactivate Video Wall.
To organize a video wall, select On.
•• Off / On
Horizontal x Vertical
This feature automatically splits a videowall display based on a videowall matrix configuration.
Enter the videowall matrix.
The videowall display is split based on the configured matrix. The number of vertical or horizontal display devices can be set within the range 1 and 15.
――A videowall display can be split into a maximum of 100 screens.
――The Horizontal x Vertical option is only enabled when Video Wall is set to On.
Screen Position
To rearrange split screens, adjust the number for each product in the matrix using the Screen Position feature.
Selecting Screen Position will display the videowall matrix with the numbers assigned to the products that form the videowall.
To rearrange products, use the direction buttons on the remote control to move a product to another desired number. Press the E button.
•• All Displays: Assign screen positions to All displays. Then, you don't need to set up video wall for individual displays.
•• Current Displays: Only Assign screen position for this first display.
――Screen Position allows you to split the screen into a maximum of 100 views (15x15). The maximum number of views that can be split when products are
connected via DP Loopout is also 100.
――The Screen Position option is only enabled when Video Wall is set to On.
――To use the function, make sure Horizontal x Vertical is configured.
Format
Select how to display images on the videowall display.
•• Full: Display images in full screen with no margin.
•• Natural: Display images in the original aspect ratio without enlarging or reducing the size.
――The Format option is only enabled when Video Wall is set to On.
89
Network Status
HOME
Check the current network and Internet connection.
→ Network Status → ENTER E
Network Status
–– The displayed image may differ depending on the model.
90
Picture Mode
HOME
→ Picture Mode → ENTER E
Picture Mode
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Videos/Images mode improves the picture quality of the video device. Text mode improves the picture quality of
the computer.
•• Shops & Shopping Centres
Suitable for shopping malls.
–– Select either Videos/Images or Text depending on the picture mode.
•• Offices & Schools
Suitable for offices and schools.
–– Select either Videos/Images or Text depending on the picture mode.
–– The displayed image may differ depending on the model.
•• Terminals & Stations
Suitable for bus terminals and train stations.
–– Select either Videos/Images or Text depending on the picture mode.
•• Video Wall
Suitable for environments where videowall display are used.
–– Select either Videos/Images or Text depending on the picture mode.
•• Calibration
In this mode, the brightness, colour, gamma and uniformity settings customized using the colour calibration
programme Advanced Color Management are applied.
–– To apply the Calibration mode properly, make sure you configure the picture quality settings, such as
brightness, colour, gamma and uniformity, using the colour calibration programme Advanced Color
Management.
–– To download the Advanced Color Management programme, visit www.samsung.com/displaysolutions.
•• BD Wise
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD
Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.
–– Available when you connect Samsung products that support BD Wise through an HDMI cable to the
product.
–– The BD Wise function is enabled only when a source device with the BD Wise function is connected.
91
On/Off Timer
HOME
→ On/Off Timer → ENTER E
――You must set Clock Set before you can use this feature.
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
The power is turned on with the specified volume or input source.
On/Off Timer
On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time
first.
(On Timer 1 ~ On Timer 7)
–– The displayed image may differ depending on the model.
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want On Timer to turn on your product.
–– The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use
the left and right arrow buttons to change entry fields.
•• Volume: Set the desired volume level. Use the left and right arrow buttons to change the volume level.
•• Source: Select the input source of your choice.
•• Content (when the Source is set to Internal/USB): From the USB device or internal memory device, select a
folder containing content you want to play when the product turns on. Content can include music, photo or
video files.
――This function is available only when a USB device is connected.
――If there is no music file on the USB device or you don’t select a folder containing a music file, the Timer function
does not operate correctly.
――If there is only one photo file in the USB, the Slide Show will not play.
――If a folder name is too long, the folder cannot be selected. Up to 255 characters are recognizable.
――Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the
folders assigned to each USB have different names.
――We recommend that you use a USB memory stick and a multi card reader when using On Timer.
――The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by
some manufacturers because the product can take too long to recognize these devices.
92
Off Timer
Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off Timer 7)
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want Off Timer to turn off your product.
–– The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use
the left and right arrow buttons to change entry fields.
Holiday Management
Timer will be disabled during a period specified as a holiday.
•• Add Holiday: Specify the period you want to add as a holiday.
Select the start and end dates of the holiday you want to add using the u/d buttons, and click the Save
button.
The period will be added to the list of holidays.
–– Start: Set the start date of the holiday.
–– End: Set the end date of the holiday.
――Delete: Delete selected items from the list of holidays.
――Edit: Select a holiday item and then change the date.
•• Set Applied Timer: Set the On Timer and Off Timer to not activate on public holidays.
–– Press E to select the On Timer and Off Timer settings you do not want to activate.
–– The selected On Timer and Off Timer will not activate.
93
Ticker
HOME
→ Ticker → ENTER E
Input text while a video or image is displayed and display the text on the screen.
•• Off / On
•• Message: Enter a message to display on the screen.
•• Time: Set the Start Time and End Time to display a Message.
•• Font options: Specify the text font and colour for the message.
Ticker
•• Position: Select an orientation to display a Message.
•• Scroll: Specify the scroll Direction and Speed for the message.
•• Preview: Preview configured caption settings.
–– The displayed image may differ depending on the model.
More settings
HOME
The picture settings menu appears.
→ More settings → ENTER E
More settings
–– The displayed image may differ depending on the model.
94
URL Launcher
HOME
For details on how to use the URL Launcher feature, contact the dealer the product was purchased from.
――To use the URL Launcher feature, set Play via to URL Launcher in System.
→ URL Launcher → ENTER E
SSSP 3.0
Change URL
pm
12:00
URL Launcher
January 1 2016
Clone Product
ID Settings
Video Wall
Network Status
Picture Mode
On/Off Timer
Ticker
More settings
–– The displayed image may differ depending on the model.
95
Chapter 07
Screen Adjustment
Configure the Picture settings (Backlight, Colour Tone, etc.).
The layout of the Picture menu options may vary depending on the product.
Picture Mode
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Videos/Images mode improves the picture quality of the video device. Text mode improves the picture quality of
the computer.
MENU m → Picture → Picture Mode → ENTER E
•• Shops & Shopping Centres
Suitable for shopping malls.
–– Select either Videos/Images or Text depending on the picture mode.
Picture
Picture Mode
Shops & Shopping Centres
· Backlight
80
· Contrast
70
· Brightness
45
· Sharpness
80
50
· Colour
· Tint (G/R)
G50
R50
–– The displayed image may differ depending on the model.
•• Offices & Schools
Suitable for offices and schools.
–– Select either Videos/Images or Text depending on the picture mode.
•• Terminals & Stations
Suitable for bus terminals and train stations.
–– Select either Videos/Images or Text depending on the picture mode.
•• Video Wall
Suitable for environments where videowall display are used.
–– Select either Videos/Images or Text depending on the picture mode.
•• Calibration
In this mode, the brightness, colour, gamma and uniformity settings customized using the colour calibration
programme Advanced Colour Management are applied.
–– To apply the Calibration mode properly, make sure you configure the picture quality settings, such as
brightness, colour, gamma and uniformity, using the colour calibration programme Advanced Colour
Management.
–– To download the Advanced Colour Management programme, visit www.samsung.com/displaysolutions.
•• BD Wise
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD
Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.
–– Available when you connect Samsung products that support BD Wise through an HDMI cable to the
product.
–– The BD Wise function is enabled only when a source device with the BD Wise function is connected.
96
Backlight / Contrast / Brightness
/ Sharpness / Colour / Tint (G/R)
MENU m → Picture → ENTER E
Picture
Picture Mode
Shops & Shopping Centres
· Backlight
80
· Contrast
70
· Brightness
45
· Sharpness
80
· Colour
50
· Tint (G/R)
G50
Your product has several options for adjusting picture quality.
Picture Mode
Shops & Shopping Centres,
Offices & Schools, Terminals &
Stations, Video Wall
Picture Mode settings
Adjustable options
Videos/Images
Backlight / Contrast / Brightness / Sharpness
/ Colour / Tint (G/R)
Text
Backlight / Contrast / Brightness / Sharpness
Calibration
Backlight
BD Wise
Backlight / Contrast / Brightness / Sharpness
/ Colour / Tint (G/R)
――When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be
adjusted accordingly.
――You can adjust and store settings for each external device you have connected to an input on the product.
――Lowering picture brightness reduces power consumption.
R50
–– The displayed image may differ depending on the model.
97
Colour Temperature
Adjust the colour temperature (Red / Green / Blue). (Range: 2800K–16000K)
――Enabled when Colour Tone is set to Off.
MENU m → Picture → Colour Temperature → ENTER E
――Colour Temperature is disabled if Picture Mode is set to Calibration or BD Wise.
Picture
Colour Temperature
16000K
–– The displayed image may differ depending on the model.
98
White Balance
2 Point
Adjust the colour temperature for a more natural picture.
MENU m → Picture → White Balance → ENTER E
•• R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.
•• R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Picture
White Balance
•• Reset: Suitable for environments where videowall display are used.
10 Point
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
•• 10 Point (Off / On)
――Level, Red, Green, Blue and Reset are enabled only when 10 Point is set to On.
–– The displayed image may differ depending on the model.
•• Level: Select interval to adjust.
•• Red: Adjust the red level.
•• Green: Adjust the green level.
•• Blue: Adjust the blue level.
•• Reset: Suitable for environments where videowall display are used.
――Some external devices may not support this function.
――Enabled when Picture Mode is set to Offices & Schools (Videos/Images).
99
Gamma
Adjust the primary colour intensity.
――If Picture Mode is set to Calibration, Gamma is disabled.
MENU m → Picture → Gamma → ENTER E
Picture
Gamma
0
–– The displayed image may differ depending on the model.
Calibrated value
Select whether to apply the brightness, colour, gamma and uniformity settings customized using the colour
calibration programme Advanced Colour Management to the Information and Advertisement modes.
MENU m → Picture → Calibrated value → ENTER E
•• Don't apply / Apply
――To download the Advanced Colour Management programme, visit www.samsung.com/displaysolutions.
――If Picture Mode is set to Calibration, Calibrated value is disabled.
Picture
Calibrated value
Don't apply
–– The displayed image may differ depending on the model.
100
Advanced Settings
Picture Mode
MENU m → Picture → Advanced Settings → ENTER E
Advanced Settings
Dynamic Contrast
Terminals & Stations
Darkest
Flesh Tone
0
Colour Space
Motion Lighting
Videos/Images
Dynamic Contrast / Black Tone / Flesh Tone /
RGB Only Mode / Colour Space
Text
Dynamic Contrast / Black Tone
Videos/Images
Dynamic Contrast / Black Tone / Flesh Tone
/ RGB Only Mode / Colour Space / Motion
Lighting
Text
Dynamic Contrast / Black Tone
High
Black Tone
RGB Only Mode
Shops & Shopping Centres,
Offices & Schools, Video Wall
Picture Mode settings Adjustable options
Off
Native
BD Wise
Dynamic Contrast / Black Tone / Flesh Tone /
RGB Only Mode / Colour Space
――If Picture Mode is set to Calibration, Advanced Settings is disabled.
Off
–– The displayed image may differ depending on the model.
101
Dynamic Contrast
Advanced Settings
Dynamic Contrast
High
Black Tone
Darkest
Flesh Tone
0
RGB Only Mode
Colour Space
Motion Lighting
Off
Native
Off
–– The displayed image may differ depending on the model.
Adjust the screen contrast.
•• Off / Low / Medium / High
Black Tone
Select the black level to adjust the screen depth.
•• Off / Dark / Darker / Darkest
Flesh Tone
Emphasize pink Flesh Tone.
RGB Only Mode
Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation.
•• Off / Red / Green / Blue
Colour Space
Adjusts the range and variety of colours (the colour space) available to create images.
•• Auto / Native / Custom
――To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom.
Motion Lighting
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
•• Off / On
――Enabled when Picture Mode is set to Terminals & Stations (Videos/Images).
102
Picture Options
Picture Mode
MENU m → Picture → Picture Options → ENTER E
Shops & Shopping Centres,
Offices & Schools, Terminals &
Stations, Video Wall
Picture Options
Colour Tone
Off
Digital Clean View
Auto
MPEG Noise Filter
Auto
HDMI Black Level
Low
Film Mode
Motion Plus
Dynamic Backlight
Picture Mode settings
Adjustable options
Videos/Images
Colour Tone / Digital Clean View / MPEG
Noise Filter / HDMI Black Level / Film Mode
/ Motion Plus / Dynamic Backlight
Text
Colour Tone / HDMI Black Level / Dynamic
Backlight
Calibration
HDMI Black Level / Dynamic Backlight
BD Wise
Colour Tone / Digital Clean View / MPEG
Noise Filter / HDMI Black Level / Film Mode
/ Dynamic Backlight
Off
Standard
On
–– The displayed image may differ depending on the model.
103
Colour Tone
Picture Options
Colour Tone
Off
Digital Clean View
Auto
MPEG Noise Filter
Auto
HDMI Black Level
Low
Film Mode
Motion Plus
Dynamic Backlight
Off
Standard
On
If Picture Mode is set to Text
•• Off / Standard / Cool / Warm
If Picture Mode is set to Videos/Images or BD Wise
•• Off / Standard / Cool / Warm1 / Warm2
――If Picture Mode is set to Calibration, Colour Tone is disabled.
――Settings can be adjusted and stored for each external device connected to an input on the product.
Digital Clean View
If the broadcast signal received by your product is weak, you can activate the Digital Clean View feature to reduce
any static and ghosting that may appear on the screen.
•• Off / Low / Medium / High / Auto
――Received signal intensity is the strongest when the bar is green.
――When the signal is weak, try all the options until the the product displays the best picture.
–– The displayed image may differ depending on the model.
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
•• Off / Low / Medium / High / Auto
104
HDMI Black Level
Picture Options
Colour Tone
Off
Digital Clean View
Auto
MPEG Noise Filter
Auto
HDMI Black Level
Low
Film Mode
Motion Plus
Dynamic Backlight
Off
Standard
On
Selects the black level on the screen to adjust the screen depth.
•• Low / Normal / Auto
――Available only in HDMI and DVI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p).
Film Mode
This mode is suitable to view movies.
Sets the product to automatically sense and process film signals from all sources and adjust the picture for
optimum quality.
•• Off / Auto1 / Auto2
――Available in HDMI (1080i).
–– The displayed image may differ depending on the model.
105
Motion Plus
Picture Options
Colour Tone
Off
Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture.
The menu names may vary depending on the country.
Digital Clean View
Auto
Off : Switches Motion Plus off.
MPEG Noise Filter
Auto
Standard : Sets Motion Plus to Standard mode.
HDMI Black Level
Low
Film Mode
Motion Plus
Dynamic Backlight
Off
Standard
On
Clear : Sets Motion Plus to Clear (suitable for viewing moving images clearly) mode.
Smooth : Sets Motion Plus to Smooth (suitable for viewing moving images naturally) mode.
Custom : Use to reduce the afterimage and judder as much as you want.
•• Blur Reduction : Use to reduce the afterimage as much as you want.
–– This is only supported if the Motion Plus is set to Custom.
•• Judder Reduction : Use to reduce the judder as much as you want.
–– This is only supported if the Motion Plus is set to Custom.
•• LED Clear Motion : Use to reduce the judder as much as you want.
–– This is only supported if the Motion Plus is set to Custom.
–– The displayed image may differ depending on the model.
•• Reset: Restore Motion Plus settings to default values.
–– The colour on screen may vary with this option unintentionally.
–– Disabled when PIP is set to On.
Dynamic Backlight
Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.
•• Off / On
106
Picture Size
choose size and aspect ratio picture displayed on screen.
Picture Size
MENU m → Picture → Picture Size → ENTER E
――Different screen adjustment options are displayed depending on the current input source.
•• 16:9: Sets the picture to 16:9 wide mode.
Picture Size
Picture Size
•• Zoom1: Use for moderate magnification. Cuts off the top and sides.
16:9
•• Smart View 1: Reduces the 16:9 picture by 50%.
· Position
Resolution
•• Zoom2: Use for a stronger magnification.
•• Smart View 2: Reduces the 16:9 picture by 25%.
Off
•• Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
•• 4:3: Sets the picture to basic (4:3) mode.
――Do not set your product to 4:3 format for a long time.
–– The displayed image may differ depending on the model.
The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen
burn) which is not covered by the warranty.
•• Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) signals are inputted.
•• Custom: Changes the resolution to suit the user's preferences.
•• Original ratio: If the input source is PC, DVI, HDMI (PC connection), the video will display in the original aspect
ratio.
107
Position
Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit or
Custom.
――To use the Position function after selecting Zoom1, Zoom2, Wide Fit, Screen Fit or Custom, follow these steps.
Picture Size
Picture Size
Custom
· Position
Resolution
Off
1
Press the d button to select Position. Press the E button.
2
Press the u or d button to move the picture up or down.
3
Press the E button.
–– The displayed image may differ depending on the model.
Zoom/Position
Adjusts the picture zoom and position. This option is available when the input source is set to HDMI (1080i/1080p)
or DVI. Picture Size must be set to Custom for the option to be available.
――Custom under Picture Size is only enabled when Picture Mode is set to Videos/Images while in DVI mode.
Picture Size
Picture Size
Custom
· Zoom/Position
Resolution
Off
–– The displayed image may differ depending on the model.
1
Press the d button to select Zoom/Position. Press the E button.
2
Select the Zoom or Position. Press the E button.
3
Press the u/d/l/r button to move the picture.
4
Press the E button.
――If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.
The picture will be set to its default position.
108
Resolution
If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize
the picture quality by selecting the same resolution for the product as the PC using this menu.
Available resolutions: Off / 1024x768 / 1280x768 / 1360x768 / 1366x768
109
Auto Adjustment
Adjust frequency values/positions and fine tune the settings automatically.
MENU m → Picture → Auto Adjustment → ENTER E
Picture
Auto Adjustment
–– Available in PC mode only.
–– The displayed image may differ depending on the model.
PC Screen Adjustment
MENU m → Picture → PC Screen Adjustment → ENTER E
Picture
PC Screen Adjustment
•• Coarse / Fine
Removes or reduces picture noise.
If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as
possible (Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is
aligned with the centre of screen.
•• Position
To adjust the PC’s screen position if it is not centreed or does not fit the product screen.
Press the ▲ or ▼ button to adjust the Vertical Position. Press the ◄ or ► button to adjust the Horizontal
Position.
•• Image Reset
Resets the image to the default settings.
–– Available in PC mode only.
–– The displayed image may differ depending on the model.
110
Picture Off
Selecting Picture Off switches off the screen. The volume is not disabled.
To switch the screen on, press any button other than the volume button.
MENU m → Picture → Picture Off → ENTER E
Picture
Picture Off
–– The displayed image may differ depending on the model.
Reset Picture
Resets your current picture mode to its default settings.
MENU m → Picture → Reset Picture → ENTER E
Picture
Reset Picture
–– The displayed image may differ depending on the model.
111
Chapter 08
OnScreen Display
PIP
PIP Settings
MENU m → OnScreen Display → PIP → ENTER E
The picture from the external video source will be in the main screen and the picture from the product will be in the
PIP sub-picture screen.
•• PIP (Off / On): Activate or deactivate the PIP function.
OnScreen Display
•• Source: You can select a source of the sub picture.
PIP
•• Position (
,
――In double (
,
•• Size (
Display Orientation
,
,
,
,
,
,
,
,
,
,
): Select a size for the subpicture.
): Select a position for the sub-picture.
) mode, you cannot select Position.
•• Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the Sub picture.
――If Source Content Orientation is set to Portrait, PIP is disabled.
Screen Protection
――Plug In Module mode is only supported when a PIM (sold separately) is connected to the product.
Message Display
Menu Language
,
English
Reset OnScreen Display
–– The displayed image may differ depending on the model.
–– For PIP sound, refer to the Sound Select instructions.
–– If you turn the product off while watching in the PIP mode, PIP mode will remain after
power Off/On.
–– You may notice that the picture in the PIP screen becomes slightly unnatural when
you use the main screen to view a game or karaoke.
112
Display Orientation
Onscreen Menu Orientation
Set the menu screen orientation.
MENU m → OnScreen Display → Display Orientation → ENTER E
•• Landscape: Display the menu in landscape mode (default).
•• Portrait: Display the menu in portrait mode on the right side of the product screen.
Display Orientation
Onscreen Menu Orientation
Landscape
Source Content Orientation
Landscape
Aspect Ratio
Full Screen
–– The displayed image may differ depending on the model.
Source Content Orientation
Set the orientation of content from external devices connected to the product.
•• Landscape: Display the screen in landscape mode (default).
•• Portrait: Display the screen in portrait mode.
――If PIP is set to On, Source Content Orientation is disabled.
Aspect Ratio
Set the rotated screen to be either full screen or original.
•• Full Screen: Display the rotated screen in full screen.
•• Original: Display the rotated screen in the original aspect ratio.
――Available only when Source Content Orientation is set to Portrait.
――If PIP is set to On, Aspect Ratio is disabled.
113
Screen Protection
Auto Protection Time
MENU m → OnScreen Display → Screen Protection → ENTER E
Screen Protection
Auto Protection Time
Off
Screen Burn Protection
If the screen displays a still image for a certain period of time you define, the product activates the screen saver to
prevent the formation of burnt in ghost images on the screen.
•• Off / 2 hours / 4 hours / 8 hours / 10 hours
Screen Burn Protection
To reduce the possibility of screen burn, this unit is equipped with Screen Burn Protection screen burn prevention
technology.
Screen Burn Protection moves the picture slightly on the screen.
The Screen Burn Protection Time setting allows you to programme the time between movements of the picture in
minutes.
–– The displayed image may differ depending on the model.
Pixel Shift
Minimize image retention by finely moving pixels horizontally or vertically.
•• Pixel Shift (Off / On)
――Horizontal, Vertical and Time are enabled only when Pixel Shift is set to On.
•• Horizontal: Sets how many pixels the screen moves horizontally.
•• Vertical: Sets how many pixels the screen moves vertically.
•• Time: Set the time interval for performing the horizontal or vertical movement, respectively.
Available Pixel Shift Settings and Optimum Settings.
Available Settings
Optimum Settings
Horizontal (pixels)
0~4
4
Vertical (pixels)
0~4
4
Time (minute)
1 min ~ 4 min
4 min
――The Pixel Shift value may differ depending on the product size and mode.
――Displaying a still image or a 4:3 output for an extended period of time may cause image retention. This is not a
defect in the product.
――If Picture Size is set to Screen Fit, Pixel Shift is disabled.
114
Timer
Screen Burn Protection
You can set the timer for Screen Burn Protection.
Pixel Shift
The Screen Burn Protection feature stops automatically after a specified period of time.
Timer
Timer
Immediate display
Off
Side Grey
Off
–– The displayed image may differ depending on the model.
Off
Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period).
Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time
to End Time).
――Mode, Period, Time, Start Time and End Time are enabled only when Timer is set to Repeat or Interval.
•• Mode: Select a screen protective pattern to display.
–– Pixel: Pixels on the screen alternate black continuously.
–– Rolling bar: A vertical bar moves left to right.
–– Fading screen: The entire screen becomes brighter, then darker.
――The Rolling bar and Fading screen patterns appear only once regardless of the specified repeat period or
time.
•• Period: Specify the time interval to activate the Screen Burn Protection function.
――The option is enabled when Repeat is selected for Timer.
•• Time: Specify the duration to keep the Screen Burn Protection function on.
――Enabled when Timer is set to Repeat and Mode is set to Pixel.
•• Start Time: Set the start time to activate the screen protection function.
――The option is enabled when Interval is selected for Timer.
•• End Time: Set the end time to deactivate the screen protection function.
――The option is enabled when Interval is selected for Timer.
115
Immediate display
Screen Burn Protection
Select the screen saver you want to display immediately.
Pixel Shift
•• Off / Pixel / Rolling bar / Fading screen
Timer
Side Grey
Immediate display
Off
Side Grey
Off
When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen.
•• Off / Light / Dark
–– The displayed image may differ depending on the model.
116
Message Display
Source Info
Select whether to display the source OSD when the input source changes.
MENU m → OnScreen Display → Message Display → ENTER E
•• Off / On
No Signal Message
Message Display
Source Info
On
No Signal Message
On
MDC Message
On
Download Status Message
Off
–– The displayed image may differ depending on the model.
Select whether to display the no-signal OSD when no signal is detected.
•• Off / On
MDC Message
Select whether to display the MDC OSD when the product is controlled by the MDC.
•• Off / On
Download Status Message
Select to display the status when downloading content from a server or other device.
•• Off / On
117
Menu Language
Set the menu language.
――A change to the language setting will only be applied to the onscreen menu display. It will not be applied to
other functions on your PC.
MENU m → OnScreen Display → Menu Language → ENTER E
OnScreen Display
Menu Language
English
–– The displayed image may differ depending on the model.
Reset OnScreen Display
This option returns the current settings under OnScreen Display to the default factory settings.
MENU m → OnScreen Display → Reset OnScreen Display → ENTER E
OnScreen Display
Reset OnScreen Display
–– The displayed image may differ depending on the model.
118
Chapter 09
Sound Adjustment
Configure the sound (Sound) settings for the product.
Sound Mode
You can select a sound mode to suit your personal preferences.
•• Standard: Selects the normal sound mode.
•• Music: Emphasizes music over voices.
MENU m → Sound → Sound Mode → ENTER E
•• Movie: Provides the best sound for movies.
•• Clear Voice: Emphasizes voices over other sounds.
Sound
Sound Mode
Standard
•• Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing
impaired.
――If Speaker Settings is set to External, Sound Mode is disabled.
Sound Effect
HDMI Sound
AV(HDMI)
Sound on Video Call
Current Source
Dolby Digital Comp
RF
Speaker Settings
Auto Volume
Off
–– The displayed image may differ depending on the model.
119
Sound Effect
Configure your preferred sound effect for output sound.
――If Speaker Settings is set to External, Sound Effect is disabled.
――Available only when Sound Mode is set to Standard.
MENU m → Sound → Sound Effect → ENTER E
Virtual Surround
Sound Effect
Virtual Surround
Off
Dialog Clarity
Off
Equaliser
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head
Related Transfer Function) technology.
•• Off / On
Dialog Clarity
This function allows you to increase the intensity of a voice over background music or sound effects so that dialog
can be heard more clearly.
–– The displayed image may differ depending on the model.
•• Off / On
Equaliser
Use Equaliser to customize sound setting for each speaker.
•• Balance L/R: Adjusts the balance between the right and left speaker.
•• 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth
frequencies.
•• Reset: Resets the equalizer to its default settings.
120
HDMI Sound
Select whether to hear from AV(HDMI) or PC(DVI).
•• AV(HDMI) / PC(DVI)
MENU m → Sound → HDMI Sound → ENTER E
Sound
HDMI Sound
AV(HDMI)
–– The displayed image may differ depending on the model.
Sound on Video Call
MENU m → Sound → Sound on Video Call → ENTER E
Select sound output to listen to during a video call.
•• Current Source / Video Call
――If Speaker Settings is set to External, Sound on Video Call is disabled.
Sound
Sound on Video Call
Current Source
–– The displayed image may differ depending on the model.
121
Dolby Digital Comp
Set Dolby Digital Compression mode.
•• Line / RF
MENU m → Sound → Dolby Digital Comp → ENTER E
Sound
Dolby Digital Comp
RF
–– The displayed image may differ depending on the model.
Speaker Settings
Sound Output
MENU m → Sound → Speaker Settings → ENTER E
If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound
echo caused by the difference in decoding speed between the products speakers and the speakers attached to your
audio receiver. If this occurs, set the product to External.
Sound
Speaker Settings
•• External / Internal / Receiver
――When you set Speaker Settings to External, the products speakers are turned off.
You will hear sound through the external speakers only. When the Speaker Settings is set to Internal, both the
product speakers and the external speakers are on. You will hear sound through both.
――If there is no video signal, both the products speakers and the external speakers will be mute.
–– The displayed image may differ depending on the model.
122
Auto Volume
The volume can vary depending on the channel.
Automatically equalize the volume level when switching to another channel.
•• Off / Normal / Night
MENU m → Sound → Auto Volume → ENTER E
Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the
same.
Sound
Auto Volume
Off
Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night,
when you may want to keep the volume low.
――To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume control
of the connected source device may not be applied if Auto Volume is set to Normal or Night.
――If Speaker Settings is set to External, Auto Volume is disabled.
–– The displayed image may differ depending on the model.
Reset Sound
The displayed image may differ depending on the model. Reset all sound settings to the factory defaults.
MENU m → Sound → Reset Sound → ENTER E
Sound
Reset Sound
–– The displayed image may differ depending on the model.
123
Chapter 10
Network
Network Status
Network Settings
MENU m → Network → Network Status → ENTER E
MENU m → Network → Network Settings → ENTER E
You can check the current network and Internet status.
Configure network settings to use various smart hub features such as Internet search, content
sharing through a home network and feature updates.
Network type
•• Wireless / Wired
124
Network Settings (Wired)
•• Depending on how your network is configured, you may be able to attach your product to
your LAN by connecting the LAN port on the back of your product directly to a network
wall outlet using a LAN cable.
See the diagram below. Note that the wall outlet is attached to a modem or router
elsewhere in your house.
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
•• You can attach your product to your LAN by connecting the LAN port on the back of your
product to an external modem using a LAN cable.
See the diagram below.
LAN
The LAN Port on the Wall
RJ45
LAN
External Modem
(ADSL / VDSL)
The Modem Port on the Wall
Modem Cable
RJ45
LAN Cable
•• You can attach your product to your LAN by connecting the LAN port on the back of your
product to an IP Sharer which is connected to an external modem. Use LAN cable for the
connection. See the diagram below.
LAN
The Modem Port on the Wall
External Modem
(ADSL / VDSL)
Modem Cable
IP Sharer
(having DHCP server)
LAN Cable
RJ45
LAN Cable
If you have a Dynamic Network, you should use an ADSL modem or router that supports
the Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS values your product
needs to access the Internet so you do not have to enter them manually. Most home networks
are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you
must enter the IP address, subnet mask, gateway, and DNS values manually on your product
Cable Setup Screen when you set up the network connection. To get the IP address, subnet
mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
――You can use ADSL modems that support DHCP if your network requires a Static IP address.
――ADSL modems that support DHCP also let you use Static IP addresses.
LAN Cable
125
Set the network connection to use Internet services such as perform software upgrades.
2
In the pop-up menu that appears, click Status.
Automatic Network Settings (Wired)
3
On the dialog that appears, click the Support tab.
Connect to the network using a LAN cable.
4
On the Support Tab, click the Details button. The Network connection values are
Make sure a LAN cable is connected first.
displayed.
How to set up automatically
1
Set Network type to Wired from the Network Settings page.
2
Press the Connect button to start Network Settings.
–– The Connect button is only enabled when the LAN cable is properly connected.
3
How to set up manually
1
Set Network type to Wired from the Network Settings page.
2
Press the Connect button to start Network Settings.
–– The Connect button is only enabled when the LAN cable is properly connected.
The network test screen appears and verifies the network connection.
When the connection has been verified, the “Wired network and Internet connection
completed.” message appears.
――If the connection process fails, check the LAN port connection.
――If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, network setup.
Manual Network Settings (Wired)
3
verification process stops.
4
Select IP Settings on network connection screen. The IP Settings screen appears.
5
Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat
the entry process for each field in the IP Address.
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and
DNS server address. Enter these values manually.
――Setting IP Settings to Enter manually automatically changes DNS Setting to Enter
manually.
6
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
The network test screen appears and the verification process starts. Press Stop. The
When done, select OK at the bottom of the page, and then press E. The network test
screen appears and the verification process starts.
7
When the connection has been verified, the “Wired network and Internet connection
completed.” message appears.
126
Network Setting (Wireless)
Connecting to a Wireless Network
Wireless IP sharer
(router having DHCP server)
The LAN Port on the Wall
Automatic Network Setup (Wireless)
Most wireless networks have an optional security system that requires devices that access the
network to transmit an encrypted security code called an Access or Security Key. The Security
Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified
length you were asked to enter when you set up security for your wireless network. If you use
this method of setting up the network connection, and have a Security Key for your wireless
network, you will have to enter the Pass Phrase during the the automatic or manual setup
process.
How to set up automatically
LAN Cable
Samsung recommends using IEEE 802.11n. When you play video over a network connection, the
video may not play smoothly.
――Select a channel for the wireless IP sharer that is not currently being used. If the channel set
for the wireless IP sharer is currently being used by another device nearby, this will result in
interference and communication failure.
1
Set Network type to Wireless from the Network Settings page.
2
The Network function searches for available wireless networks. When done, it displays a
list of the available networks.
3
button twice.
――Your product supports only the following wireless network security protocols.
――If the desired wireless router does not appear, select Refresh to search again.
If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is
set to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung products
will not support a connection in compliance with new Wi-Fi certification specifications.
――If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the
network via PBC (Push Button Configuration) or PIN (Personal Identification Number). WPS
will automatically configure the SSID and WPA key in either mode.
――Connection Methods: You can setup the wireless network connection in three ways.
Auto Setup (Using the Auto Network Search function), Manual Setup, WPS(PBC)
In the list of networks, press the ▲ or ▼ button to select a network, and then press the E
――If the router cannot be found after retrying, select the Stop button.
The Add Network button appears.
4
If the Enter password. screen appears, go to step 5. If you select a wireless router that
does not have security, go to step 7.
5
If the router has security, enter the Enter password. (Security key or PIN).
127
6
When done, use the right arrow button to move the cursor to Done, and then press E.
How to set up manually
The network connection screen appears and the verification process starts.
1
Set Network type to Wireless from the Network Settings page.
2
The Network function searches for available wireless networks. When done, it displays a
――A connection with the router is established, but the Internet cannot be accessed.
7
When the connection has been verified, the “Your wireless network and Internet
list of the available networks.
connection are setup and ready to use.” message appears.
3
Manual Network Setup (Wireless)
In the list of networks, press the u or d button to select a network, and then press the
E button twice.
Offices may use static IP addresses.
――If the desired wireless router does not appear, select Refresh to search again.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and
DNS server address. Enter these values manually.
――If the router cannot be found after retrying, select the Stop button.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
4
If the Enter password. screen appears, go to step 5. If you select a wireless router that
does not have security, go to step 7.
5
If the router has security, enter the Enter password. (Security key or PIN).
6
When done, use the right arrow button to move the cursor to Done, and then press E.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
7
Select Stop while network connections are being attempted. This will stop the connection.
4
On the Support Tab, click the Details button. The Network connection values are
8
Select IP Settings on network connection screen. The IP Settings screen appears.
9
Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat
displayed.
The network connection screen appears and the verification process starts.
the entry process for each field in the IP Address.
――Setting IP Settings to Enter manually automatically changes DNS Setting to Enter
manually.
128
10 When done, select OK at the bottom of the page, and then press E. The network test
screen appears and the verification process starts.
11
When the connection has been verified, the “Your wireless network and Internet
connection are setup and ready to use.” message appears.
WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
1
Set Network type to Wireless from the Network Settings page.
2
Select WPS(PBC), press E, and then press E again.
3
Press the WPS(PBC) button on your router within 2 minutes. Your product automatically
acquires all the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.
129
Wi-Fi Direct
MENU m → Network → Wi-Fi Direct → ENTER E
To use this function, your mobile
device should be supported by the WiFi Direct.
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a
router.
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1
Go to Wi-Fi Direct screen. The product starts to search devices.
2
Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.
•• PBC (Push Button Configuration): Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. Your product automatically acquires all the
network setting values it needs and connects to your network.
•• PIN: Input the displayed PIN on your device.
――If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnected.
Multimedia Device Settings
MENU m → Network → Multimedia Device Settings → ENTER E
Allow other devices such as smart phones and tablets on your network, to share content with your product.
130
Screen Mirroring
Server Network Settings
MENU m → Network → Screen Mirroring → ENTER E
MENU m → Network → Server Network Settings → ENTER E
Connect a mobile device that supports the mirroring function to the product. This allows the
screen and sound from the mobile device to be outputted on the product. Mirroring refers to
outputting the screen and sound from a mobile device on a display device.
――To use Screen Mirroring, make sure the mobile device supports the mirroring function such
Connect to server
as AllShare Cast, WiDi (version 3.5 or higher) and Miracast. To check if the mirroring function
is available, visit the mobile device manufacturer website.
――Screen or sound output may be choppy if there is network congestion.
Screen Mirroring
Run the mirroring function from the mobile device. The mobile device automatically searches
and displays the product in a list.
――If the mobile device cannot connect to the product, turn them off and then on again, and try
again.
To run Player connect to a network.
•• Server Address / SSL / Port
――If the SSL option is enabled, the server is configured to use https and data transfer is
encrypted.
――Enter the server IP address and port number. Use 7001 as the port number. (If unable to
connect to the server using port number 7001, check with your server administrator to find
the correct port number and then change the port number.)
MagicInfo Mode
Select the appropriate MagicInfo Mode depending on the environment where you are using the
product.
•• Lite / Premium
Server Access
Select a method to connect the server network.
•• Allow / Deny
FTP Mode
Specify the FTP operating mode.
•• Active / Passive
131
Device Name
MENU m → Network → Device Name → ENTER E
Select or enter a device name.
This name can be shown on network remote controls over the network.
•• [Signage]Display 1 ~ 6 / User Input
132
Chapter 11
System
Accessibility
Menu Transparency
Adjust transparency of menu box.
MENU m → System → Accessibility → ENTER E
•• High / Medium / Low
Accessibility
Menu Transparency
High Contrast
Medium
Set the background and font to high-contrast colours in Menu. Menu transparencies become opaque when the
option is selected.
High Contrast
Off
•• Off / On
Enlarge
Off
Enlarge
Set whether to enlarge highlighted item in Menu.
–– The displayed image may differ depending on the model.
•• Off / On
133
Setup
Initial settings (System)
MENU m → System → Setup → ENTER E
Go through the initial setup steps like you did the first time you used this product.
――Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
System
Accessibility
Setup
Touch Control
Time
Auto Source Switching
Power Control
Eco Solution
–– The displayed image may differ depending on the model.
134
Touch Control
Configure touch control related features.
MENU m → System → Touch Control → ENTER E
Touch Control
Touch Control Lock
Lock the touchscreen control mode to prevent devices from being controlled by touch input.
•• Off / On
Touch Control Lock
Off
Admin Menu Lock
Admin Menu Lock
Off
Set the Admin Menu Lock to display the administrator settings menu when you tap and hold the finger on the
screen.
Device to Control
Samsung SMART Signage
•• Off / On
――To use the Touch Control feature, attach the touch screen overlay kit (sold separately).
Device to Control
–– The displayed image may differ depending on the model.
Specify a source to control by touch input.
•• Auto: Switch Device to Control according to the input source.
•• Samsung SMART Signage: Input touch signals to the display device.
•• TOUCH OUT (Front): Output touch signals via the TOUCH OUT port of the Tray.
•• TOUCH OUT (Rear): Output touch signals via the TOUCH OUT port on the back of the product.
Device to
Control
Source
Samsung SMART Signage TOUCH OUT (Front)
Magicinfo S, Magic IWB S
HDMI3
TOUCH OUT (Rear)
PC, Screen Mirroring,
HDMI1, HDMI2, DVI,
Magicinfo, Plug In Module
135
Time
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a
specified time using the Timer function.
――Press the INFO button if you want to view the current time.
MENU m → System → Time → ENTER E
Clock Set
Time
Select Clock Set. Select Date or Time, and then press E.
Clock Set
DST
On
Sleep Timer
Off
Power On Delay
0 sec
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow
buttons to move from one entry field to the next. Press E when done.
――You can set the Date and Time directly by pressing the number buttons on the remote control.
DST
Switches the DST (Daylight Saving Time) function on or off.
Off / On
•• Start Date: Set the start date of Daylight Saving Time.
–– The displayed image may differ depending on the model.
•• End Date: Set the end date of Daylight Saving Time.
•• Time Offset: Select the correct time offset your timezone.
Sleep Timer
Automatically shuts off the product after a preset period of time.
(Off / 30 min / 60 min / 90 min / 120 min / 150 min / 180 min)
――Use the up and down arrows to select a period of time, and then press E. To cancel Sleep Timer, select Off.
Power On Delay
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within
the range 0–50 seconds).
136
Auto Source Switching
Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the
display will automatically search the different video input sources for active video.
MENU m → System → Auto Source Switching → ENTER E
Auto Source Switching
When the Auto Source Switching is On, the display video source will automatically be searched for active video.
Auto Source Switching
The Primary Source selection will be activated, if the current video source is not recognized.
Auto Source Switching
Off
Primary Source Recovery
Off
Primary Source
All
Secondary Source
PC
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an
active source, each search checking the primary and then secondary source. If both searches fail, the display will
return to the first video source and display a message indicating that there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence
looking for an active video source, returning back to the first video source in the sequence if no video is found.
Primary Source Recovery
–– The displayed image may differ depending on the model.
Select whether to restore the selected primary input source when a primary input source is connected.
――The Primary Source Recovery function is disabled if Primary Source is set to All.
Primary Source
Specify Primary Source for the automatic input source.
Secondary Source
Specify Secondary Source for the automatic input source.
――The Secondary Source function is disabled if Primary Source is set to All.
137
Power Control
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
MENU m → System → Power Control → ENTER E
PC module power
Power Control
Auto Power On
Off
Standby Control
Power Button
Network Standby
The PC module can be turned on/off separately from the LFD.
Synced power-on
PC module power
Max. Power Saving
•• Off / On
On
Auto
Power on only
Off
–– The displayed image may differ depending on the model.
To turn on the PC module without turning on the LFD, select Off.
•• Off / On
Synced power-off
To turn off the LFD without turning off the PC module, select Off.
•• Off / On
Max. Power Saving
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
•• Off / On
――Available only PC, DVI, HDMI mode.
138
Standby Control
Power Control
Auto Power On
Off
PC module power
Max. Power Saving
Standby Control
Power Button
Network Standby
You can set the screen standby mode to be applied when an input signal is received.
•• Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to
the display.
On
The message No Signal will appear if no source device is connected.
Auto
•• Off
The message No Signal will appear if no input signals are detected.
Power on only
Off
――The Standby Control option is only enabled when Source is set to PC, DVI or HDMI.
――If No Signal is displayed although a source device is connected, check the cable connection.
――If No Signal Message is set to Off, the No Signal message does not appear.
If this is the case, set No Signal Message to On.
–– The displayed image may differ depending on the model.
•• On
Power-saving mode will activate if no input signals are detected.
Power Button
The power button can be set to either turn on the power or turn on/off the power.
•• Power on only: Set the power button to turn on the power.
•• Power on and off: Set the power button to turn on/off the power.
Network Standby
This feature keeps the network power on when the product turns off.
•• Off / On
139
Eco Solution
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
MENU m → System → Eco Solution → ENTER E
•• Off / Low / Medium / High
Eco Sensor
Eco Solution
Energy Saving
Off
Eco Sensor
Off
Screen Lamp Schedule
Off
No Signal Power Off
Off
Auto Power Off
Off
–– The displayed image may differ depending on the model.
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
•• Off / On
――Adjusting the Backlight setting under Picture while Eco Sensor is on will disable the Off.
――If the screen contrast is not sufficient, set the Eco Sensor to Off.
If the Eco Sensor is Off, it may not comply with energy standards.
Min. Backlight
When Eco Sensor is On, you can manually adjust the minimum screen brightness. Min. Backlight is the darkest
backlight mode. Make sure the Min. Backlight setting is lower than the Backlight setting.
――If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the
surrounding light intensity.
140
Screen Lamp Schedule
Eco Solution
Energy Saving
Off
Screen Lamp Schedule
Eco Sensor
Off
Enable or disable the lamp schedule.
Screen Lamp Schedule
Off
No Signal Power Off
Off
Schedule 1, Schedule 2
Auto Power Off
Off
Time
•• Off / On
The panel brightness will change to the brightness set in Lamp at a specified time.
–– The displayed image may differ depending on the model.
Lamp
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
•• 0 ~ 100
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
•• Off / 15 min / 30 min / 60 min
――Disabled when an attached PC is in power saving mode.
――The product will automatically power off at a specified time. The time can be changed as required.
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front
panel within select hours to prevent overheating.
•• Off / 4 hours / 6 hours / 8 hours
141
Temperature Control
This function detects the internal temperature of the product. You can specify the temperature range that is
acceptable.
The default temperature is set to 77 C.
MENU m → System → Temperature Control → ENTER E
System
Temperature Control
The recommended operating temperature for this product is 75 to 80 C (based on an ambient temperature of 40 C).
――The screen will become darker if the current temperature exceeds the specified temperature limit. If the
temperature continues to rise, the product will power off to prevent overheating.
77
–– The displayed image may differ depending on the model.
142
Device Manager
MENU m → System → Device Manager → ENTER E
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
Configure options for external input devices connected to the product.
Keyboard Settings
Connecting a keyboard to the product displays the Keyboard Settings menu.
Select Keyboard
Select a keyboard you want to use from the available connected keyboards.
――It is possible to use only one connected keyboard.
Keyboard Options
――Depending on the country.
–– The displayed image may differ depending on the model.
Keyboard Language
Specify the keyboard input language.
Keyboard type
Specify the keyboard type.
Switch Input Language
Configure the key combination used to change the input language.
143
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
Mouse Settings
Connecting a mouse to the product displays the Mouse Settings menu.
Select Mouse
Configure mouse connection settings or options for connected mouse devices.
――Among connected mouse devices, only one mouse can be used.
Mouse Options
–– The displayed image may differ depending on the model.
――Depending on the country.
Primary Button
Select a button on the mouse that will perform basic functions (click and enter).
•• Left (default) / Right
Pointer Speed
Set the mouse pointer speed.
•• Slow / Standard / Fast
144
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
Pointer Settings
Specify the pointer size, speed and shape.
――Pointer Settings is only available when a Magic Presenter (sold separately) is connected.
Pointer Size
Specify the pointer size.
•• Small / Medium / Large / Extra Large
–– The displayed image may differ depending on the model.
Pointer Speed
Specify the pointer speed. A higher speed increases the pointer sensitivity.
•• Slow / Standard / Fast
Pointer Image
Specify the pointer shape.
•• Image 1 ~ Image 10
145
Play via
Select the appropriate Play via mode depending on the environment where you are using the product.
The home screen may be different depending on the setting.
MENU m → System → Play via → ENTER E
•• MagicInfo / URL Launcher
System
Play via
MagicInfo
–– The displayed image may differ depending on the model.
Change PIN
MENU m → System → Change PIN → ENTER E
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN.
When the Confirm screen disappears, press the Close button. The product has memorised your new PIN.
――Default password: 0 - 0 - 0 - 0
System
Change PIN
–– The displayed image may differ depending on the model.
146
Security
Safety Lock
――Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
MENU m → System → Security → ENTER E
•• Off / On
Security
All the menus and buttons of the product and remote control, except for the LOCK button on the remote control,
will be locked by the Safety Lock function.
Safety Lock
Off
· Power On Button
On
Button Lock
Off
USB Auto Play Lock
Off
Mobile Connection Lock
Off
To unlock the menus and buttons, press the LOCK button and then enter the password (default password: 0 - 0 - 0 0).
Power On Button
Turn on this feature to enable the remote control's Power button to turn on the device while Safety Lock is enabled.
•• Off / On
Button Lock
This menu can be used to lock the buttons on the product.
–– The displayed image may differ depending on the model.
Only the remote control can control the product if Button Lock is set to On.
•• Off / On
147
USB Auto Play Lock
Security
Safety Lock
Off
· Power On Button
On
Button Lock
Off
USB Auto Play Lock
Off
Mobile Connection Lock
Off
Select whether to automatically play MagicInfo content saved on a connected USB device.
•• Off
Play MagicInfo content saved on the USB device automatically.
•• On
Do not play MagicInfo content saved on the USB device automatically.
――Connecting a USB device containing MagicInfo content displays "USB Auto Play Lock : On" for five seconds.
Mobile Connection Lock
Restrict other devices on your network, such as smart phones and tablets, to share content with your signage.
–– The displayed image may differ depending on the model.
•• Off / On
148
General
Smart Security
The security provided to protect your display device and connected storage devices against viruses includes.
MENU m → System → General → ENTER E
Smart Security
General
Use this option to turn Smart Security protection on and off.
Smart Security
On
BD Wise
On
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
DivX® Video On Demand
Game Mode
Off
–– The displayed image may differ depending on the model.
•• Off / On
Scan
Inspect your display device and connected storage devices to check for viruses.
Isolated List
This is the list of items that have been Isolated for containing viruses.
Allowed List
This is the list of items that have been Allowed as not containing viruses.
Settings
Set the Smart Security options.
Auto Scan
Scans automatically when the display device is turned on.
•• Off / On
Move to Isolated List automatically
Moves viruses to the Isolated List automatically.
•• Off / On
149
BD Wise
General
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise.
When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.
Smart Security
On
BD Wise
On
•• Off / On
――Available when you connect Samsung products that support BD Wise through an HDMI cable to the product.
Anynet+ (HDMI-CEC)
On
――The BD Wise function is enabled only when a source device with the BD Wise function is connected.
HDMI Hot Plug
On
DivX® Video On Demand
Game Mode
Off
–– The displayed image may differ depending on the model.
150
Anynet+ (HDMI-CEC)
General
Smart Security
On
Anynet+ (HDMI-CEC)
BD Wise
On
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your
Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+
feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
――You can only control Anynet+ devices using the product remote control, not the buttons on the product.
――Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
DivX® Video On Demand
Game Mode
――The product remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
Off
–– The displayed image may differ depending on the model.
――While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display. It does not
work if the AV device is connected as a secondary display.
――Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the product.
――Press the TOOLS button to display the Anynet+ menu and select a menu you want.
Anynet+ Menu
Description
View PC
Changes Anynet+ mode to PC mode.
Select Device
Shows the Anynet+ device list.
(device_name) MENU
Shows the menu of the connected device menus. E.g. if a DVD player is
connected, the disc menu of the DVD player will appear.
(device_name) Tools
Shows the tools menu of the connected device. E.g. if a DVD player is
connected, the tools menu of the DVD player will appear.
――Depending on the device, this menu may not be available.
(device_name) Title Menu
Shows the title menu of the disc in the connected device. E.g. If a DVD player
is connected, the title menu of the movie in the DVD player will appear.
――Depending on the device, this menu may not be available.
151
Auto Turn Off
Anynet+ (HDMI-CEC)
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
Anynet+ (HDMI-CEC)
On
Auto Turn Off
No
Search for Devices
–– The displayed image may differ depending on the model.
•• No / Yes
――If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off.
――May not be enabled depending on the device.
Search for Devices
Switching between Anynet+ Devices
1
Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press E.
2
Select Select Device, and then press the E button.
If you cannot find a device you want, select Refresh to refresh the list.
3
Select a device, and then press the E button. You can switch to the selected device.
――The Select Device menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu.
――Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while
switching is in progress.
――If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you
cannot use the Anynet+ function.
――Make sure to switch to an Anynet+ device by using the Select Device.
152
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution
•• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
•• Check if the Anynet+ device power cord is properly connected.
•• Check the Anynet+ device’s Video/Audio/HDMI cable connections.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
•• Check whether the remote control is Anynet+ compatible.
•• Anynet+ doesn’t work in certain situations. (initial setup)
•• If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn
your product off and on again.
•• Check if the Anynet+ function of the Anynet device is set on.
I want to start Anynet+.
•• Check if the Anynet+ device is properly connected to the product and check if the Anynet+ (HDMI-CEC) is set to
On in the System menu.
•• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
•• Select View PC in the Anynet+ menu.
•• If using the remote control, press SOURCE on the remote control and select a device that is not an Anynet+
device.
•• If using touchscreen control mode, touch and hold on the screen when the product is turned on to display the
administrator menu. Select Source
from the administrator menu.
The message “Disconnecting
Anynet+ device ...” appears on
the screen.
•• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
The Anynet+ device does not
play.
•• You cannot use the play function when initial setup is in progress.
•• Use the remote control after the product has completed Anynet+ configuration or has finished switching to
Anynet+.
153
Problem
The connected device is not
displayed.
Possible Solution
•• Check whether or not the device supports Anynet+ functions.
•• Check whether or not the HDMI cable is properly connected.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
•• Search Anynet+ devices again.
•• Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable.
•• Some HDMI cables may not support Anynet+ functions.
•• If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected,
please repeat the device scan.
154
HDMI Hot Plug
General
Smart Security
On
BD Wise
On
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
•• Off / On
DivX® Video On Demand
Shows the registration code authorized for the product.
If you connect to the DivX® web site and register using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit “http://vod.divx.com”.
DivX® Video On Demand
Game Mode
This feature is used to activate the time delay to turn on a DVI/HDMI source device.
Off
Game Mode
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming
experience by selecting game mode.
–– The displayed image may differ depending on the model.
•• Off / On
――Precautions and limitations for Game Mode
To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
155
Reset System
This option returns the current settings under system to the default factory settings.
MENU m → System → Reset System → ENTER E
System
Reset System
–– The displayed image may differ depending on the model.
156
Chapter 12
Support
Software Update
Contact Samsung
MENU m → Support → Software Update → ENTER E
MENU m → Support → Contact Samsung → ENTER E
The Software Update menu lets you upgrade your product software to the latest version.
――Be careful not to turn off the power until the upgrade is complete. The product will turn off
View this information when your product does not work properly or when you want to upgrade
the software.
and on automatically after completing the software upgrade.
――When you upgrade software, all video and audio settings you have made will return to their
default settings. We advise you to write down your settings so that you can easily reset them
after the upgrade.
Update now
Update the software to the latest version.
――Current version: This is the software version already installed in the product.
Auto update
You can find information regarding our call centres and how to download products and
software.
――Contact Samsung and find the product Model Code and Software Version.
Go to Home
MENU m → Support → Go to Home → ENTER E
Accessible using the HOME
button on the remote control.
Go to Home to play a variety of content from a memory device or a connected network.
This feature automatically updates the product when not in use.
•• Off / On
Reset All
MENU m → Support → Reset All → ENTER E
This option returns all the current settings for a display to the default factory settings.
157
Chapter 13
Playing photos, videos and music (Media Play)
Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device.
Play photos, videos or music saved on a storage device.
Play a variety of content using the following methods.
•• Using a USB device: Play media content such as videos, photos and music from a USB device.
•• Connecting a storage device: Play media content saved on a storage device such as a smartphone, camera, PC or cloud service.
Read the following before using media play with a USB device
Caution
•• Before connecting a USB device to the product, back up files to ensure your data is not damaged or lost.
Samsung Electronics is not liable for any damage or loss of data.
•• Do not remove a USB device while it is loading.
•• If a USB device is connected using a USB extension cable, the USB device may not be recognized or files saved on the device may not be able to be read.
•• If the product does not recognize a connected USB device, the files on the USB device may be corrupted or may not be able to be played.
If this occurs, connect the USB device to the PC to format the device, then make sure the device is connected properly.
•• USB HDD greater than 2TB is not supported.
158
Compatible devices with media play
•• Some USB digital cameras, smartphones and audio devices may not be compatible with the product.
•• Media play is only compatible with USB MSC devices.
•• MSC device refers to a Mass Storage Class Bulk-Only Transport device.
Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs. (USB hubs are not supported.)
These MSC devices must be connected directly to a USB port on the product.
•• If more than one Picture Transfer Protocol (PTP) device is connected, only one will work at a time.
•• If multiple MSC devices are connected, some devices may not be recognized. USB devices that require high power (higher than 500mA or 5V) may not
be supported.
•• If an overheating warning message appears when a USB device is connected or used, the USB device may not be recognized or function properly.
•• The screensaver activates if the product is left idle for a period of time specified in Auto Protection Time.
•• Power-saving mode on some external hard disk drives may automatically deactivate after connecting to the product.
File system and formats
•• Media play may not function properly with unlicenced multimedia files.
•• Media Transfer Protocol (MTP) is not supported.
•• Supported file systems include FAT16, FAT32 and NTFS (read only).
•• Media play supports the sequential JPEG format.
It does not support the progressive JPEG format.
•• Images with a higher resolution take longer to be displayed on the screen.
•• The maximum JPEG resolution supported is 15360x8640 pixels.
•• If a file is incompatible or corrupted, a message Not Supported File Format. appears.
•• When sorting files in folder view mode, a maximum of 1000 files can be displayed in each folder.
•• If a USB device contains 8000 files and folders or more, some files and folders may not open.
•• DRM MP3 files downloaded from websites that charge a fee cannot be played.
Digital Rights Management (DRM) refers to a system for protecting the copyrights of data circulated via the Internet or other digital media by enabling
secure distribution and/or disabling illegal distribution of the data.
159
Using a USB device
Connecting a USB device
1
Turn on your product.
2
Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product.
3
The Player page automatically appears as soon as a USB device connects to the product.
――If only one USB device is connected, files saved on the USB device are displayed automatically.
It is recommended to use a USB HDD
that has a power adapter.
――To view content saved on a USB device, connect the USB device to a USB port on the product.
Removing a USB device
Removing a USB device from Source
1
It is recommended to remove a USB
device using the Disconnect USB
Device function.
If using the remote control, press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
–– SOURCE → Source
If using touchscreen control mode, connect an external device. Next, touch and hold on the screen when the product is turned on to display the
administrator menu. Select Source
from the administrator menu.
–– Administrator menu → Source
→ Source
2
Select USB from Source, and then press the TOOLS button on the remote control. The Options menu is displayed.
3
Select Disconnect USB Device and wait until the USB device is disconnected. The USB device is disconnected.
160
Playing media content from a PC/mobile device
Approving a PC/mobile device connection
Play photos, videos or music saved on a PC or mobile device.
To play media content from a PC or mobile device on the product, the connection with the PC or mobile device must be approved.
――The media playback feature is available on any devices that support DLNA DMC. The DLNA DMC feature allows you to search media content and control
content playback from a product after connecting a PC or mobile device to the product.
1
If using the remote control, press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
–– SOURCE → Source
If using touchscreen control mode, connect an external device. Next, touch and hold on the screen when the product is turned on to display the
administrator menu. Select Source
from the administrator menu.
–– Administrator menu → Source
→ Source
2
Select Network from Source. The Network Device menu appears.
3
Select Options from the screen, and then select Multimedia Device Settings. A list of devices connected to the product will appear.
4
Select a device and approve the device connection. Playback is only available on devices that are permitted to connect.
――Sending a media content playback request from a PC or mobile device displays a prompt asking if connection with the product is permitted.
Conveniently connect the devices using the prompt.
――For details on how to configure a network, refer to the section Network Settings.
――Ensure the product and PC are connected to the same network subnet.
All IP addresses are made up of four parts separated by dots.
(E.g. IP address 111.222.333.444) The product should have the same IP address as the PC, except for the fourth part of the address, if they are connected
to the same subnet. (E.g. 111.222.333.***)
161
When connected to a home network (DLNA)
Play content saved on a device connected to a home network.
――Playing media content using a non-Samsung DLNA server may result in a compatibility issue.
――Playback of some media content shared with a PC or mobile device may not be possible depending on the content encoding type or the content file
format. Some functions may not be available.
――Media content may not play properly if there is network congestion. If this is the case, use a USB device.
1
If using the remote control, press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
–– SOURCE → Source
If using touchscreen control mode, connect an external device. Next, touch and hold on the screen when the product is turned on to display the
administrator menu. Select Source
from the administrator menu.
–– Administrator menu → Source
→ Source
2
Select Network from Source. The Network Device menu appears.
3
Select a device connected via the home network (DLNA). A list of files and folders shared with the selected device will appear.
4
Select media content to play from the list. Play the selected media content.
Features provided in the media content list page
SOURCE → Source → USB
The media content list page on a storage device provides the following features.
•• Sort by
Rearrange the media content list under the selected file format in a desired view mode.
–– This menu item is not available if Filter is set to All.
•• Filter
Among Photos, Videos and Music content saved on a storage device, view content files under a desired file format only.
•• Options
–– This menu item is not available if Filter is set to All.
162
Menu items in the media content list page
Option Name
Operations
Photos
Videos
Music
Slide Show
Start a slideshow.
――This menu item is not available if Sort by is set to Folder.
Encoding
Select an encoding language if the title of media content appears
corrupted.
c
Rename Playlist
Rename a playlist.
c
Delete Playlist
Delete a playlist.
c
Add to Playlist
Add files to a playlist or create a new playlist.
c
Play Selected
Select and play desired content from the media content list.
c
c
c
Send
Send media content to another storage device. This is similar to the "copy"
feature on PCs.
c
c
c
Index
Select an index to conveniently locate media content if a storage device
contains a lot of media content.
――Provided indices include dates and alphanumeric characters.
c
c
c
c
――This menu item is not available if Sort by is set to Folder.
163
Available buttons and features during photo playback
Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear.
•• Pause / Play
Start or stop a slideshow. Using a slideshow, it is possible to play all photos in a folder.
–– Pressing the INFO button while a
device name is selected will display
information about the selected
device.
–– Pressing the INFO button while a file
is selected will display information
about the selected file.
•• Previous / Next
View the previous or next photo.
•• Settings
Option Name
Slideshow Settings
Operations
Speed: Change the slideshow speed.
Effects: Apply transition effects between photos.
Rotate
Rotate photos.
Zoom
Zoom in on photos up to 4x.
Picture Mode
Change the Picture Mode.
Background Music
Play background music while viewing photos.
――Make sure a music file is saved on the same device.
――The mini player is displayed while background music (Background Music) is playing. Using the mini player, pause the music
currently playing or change to another music.
――Previous BGM track / Pause BGM / Play BGM / Next BGM track
Sound Mode
Change the Sound Mode.
――This menu item is only available when background music (Background Music) is playing.
Select Speakers
Select a speaker that will output the background music (Background Music).
――This menu item is only available when background music (Background Music) is playing.
Send
Send open photos to another storage device. This is similar to the "copy" feature on PCs.
Information
View information about a file.
164
Available buttons and features
during video playback
Option Name
Select Scene
Operations
Thumbnails: Select a scene and play the video from the scene.
――Thumbnails is not available if 1) the thumbnail of the video is not extracted yet, 2) the
video contains audio only or 3) the video play time is shorter than 60 seconds.
Pressing the E or TOOLS button displays the following buttons. The
RETURN button makes the buttons disappear.
Chapter Titles: Select and play another video in the same folder.
Time Bar: You can use the l and r buttons to scan through the file in 10-second intervals
or enter a specific time value to jump to that point in the video.
•• Pause / Play
Pause or play a video.
The following features are available in pause mode. Note that sound
cannot be heard in pause mode.
•• Rewind / Fast Forward
Rewind or fast forward a video. Speed up playback up to 3x, if
required. To change the playback speed to the original speed, select
∂.
•• Previous / Next
To play the previous video, select  twice. Selecting  once will play
the current video from the beginning.
To play the next video, select ‚.
•• Settings
Subtitle
Language / Sync / Reset Sync / Size / Encoding
――If the subtitle is displayed incorrectly, change Encoding options.
Repeat
Configure Repeat.
Off
Repeat One: Play the current video repeatedly.
Repeat All: Play all videos in a folder repeatedly.
Rotate
Rotate an image.
Picture Size
Change the screen size (Picture Size). Supported screen sizes vary depending on the
image.
Picture Mode
Change the Picture Mode.
Sound Mode
Change the Sound Mode.
Select Speakers
Select a speaker that will output sound from the product.
Audio Language
Play a video using a desired language. This feature only activates when a streaming file
that supports multiple audio formats is playing.
Information
View information about a file.
165
Available buttons and features during music playback
•• Pause / Play
Pause or play music.
•• Rewind / Fast Forward
Rewind or fast forward music. Speed up playback up to 3x, if required. To play the previous music file, select ∂ twice.
•• Previous / Next
To play the previous music file, select  twice. Selecting  once will play the current music from the beginning.
To play the next music file, select ‚.
•• Repeat
Configure Repeat mode. Repeat One plays the current music file repeatedly. Repeat All plays all files in a folder repeatedly.
•• Shuffle
Enable or disable shuffle playback mode.
•• Select Speakers
Select a speaker that will output sound from the product.
•• Sound Mode
Change the Sound Mode.
166
Supported Subtitle and Media play file formats
Subtitle
External
Internal
•• MPEG-4 timed text (.ttxt)
•• Xsub
Container: AVI
•• SAMI (.smi)
•• SubStation Alpha
Container: MKV
•• SubRip (.srt)
•• SubViewer (.sub)
•• Advanced SubStation Alpha
Container: MKV
•• Micro DVD (.sub or .txt)
•• SubStation Alpha (.ssa)
•• SubRip
Container: MKV
•• Advanced SubStation Alpha (.ass)
•• Powerdivx (.psb)
•• MPEG-4 timed text
Container: MP4
Supported image resolutions
File Extension
Type
Resolution
*.jpg, *.jpeg
JPEG
15360 x 8640
*.png
PNG
1920 x 1080
*.bmp
BMP
1920 x 1080
*.mpo
MPO
15360 x 8640
167
Supported music file formats
File Extension
Type
Codec
Comments
*.mp3
MPEG
MPEG1 Audio Layer 3
*.m4a, *.mpa, *.aac, *.3ga
MPEG4
AAC
*.flac
FLAC
FLAC
The Seek (jump) function is not supported.
Supports up to 2 channel
Supported Video Formats
•• Video content will not play, or not play correctly, if there is an error in the content or the container.
•• Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.
•• If the Index Table is in error, the Seek (Jump) function is not supported.
•• You may experience file stuttering while playing a video through a network connection.
•• The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.
•• Some USB/digital camera devices may not be compatible with the player.
Video Decoder
Audio Decoder
Supports up to H.264, Level 4.1
Supports up to WMA 10 Pro 5.1 channel.
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
WMA lossless audio is not supported.
For all Video codecs except MVC, VP8, VP6:
QCELP, AMR NB/WB are not supported.
•• Below 1280 x 720: 60 frame max
If Vorbis is only in Webm container, supports up to 2 channel.
•• Above 1280 x 720: 30 frame max
GMC 2 over is not supported.
Supports only BD MVC Spec.
168
File
Extension
Container
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
MP4
*.mp4
3GP
*.mov
VRO
*.3gp
VOB
*.vro
PS
*.mpg
TS
Video Codec
DivX 3.11 / 4.x / 5.x / 6.x
Resolution
1920 x 1080
Frame rate
(fps)
6~30
Bit rate
(Mbps)
30
Audio Codec
AC3
LPCM
ADMPCM
MPEG4 SP / ASP
(IMA, MS)
AAC
HE-AAC
H.264 BP / MP / HP
WMA
DD+
Motion JPEG
MPEG(MP3)
*.mpeg
DTS Core
*.ts
Window Media Video v9
G.711(ALaw,μ-Law)
*.tp
*.trp
MPEG2
*.mov
*.flv
MPEG1
*.vob
*.svi
*.m2ts
*.mts
*.divx
*.webm
WebM
VP6
640 x 480
MVC
1920 x 1080
VP8
4
24 / 25 / 30
40
6 ~ 30
8
Vorbis
169
Chapter 14
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Centre
–– Before calling Samsung Customer
Service Centre, test your product
as follows. If the problem persists,
contact Samsung Customer Service
Centre.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
–– If the screen remains blank, check
the PC system, video controller and
cable.
1
Power off both the PC and product.
2
Disconnect all the cables from the product.
3
Power on the product.
4
If No Signal is displayed, the product is operating normally.
Checking the Resolution and Frequency
Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected
(refer to Supported Resolutions).
170
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connection is
secure.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product
and PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem,
adjust the screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update
the graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to
adjust the screen settings.)
PC is shown in Source when a PC is not connected.
PC is always shown in Source irrespective of whether or not a PC is connected.
Screen issue
The power LED is off. The screen will not switch on.
Make sure that the power cord is connected.
No Signal is displayed on the screen.
Check that the product is connected correctly with a cable.
Check that the device connected to the product is powered on.
Not Optimum Mode is displayed.
This message is displayed when a signal from the graphics card exceeds the product's
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency
according to the product specifications.
The images on the screen look distorted.
Check the cable connection to the product.
171
Screen issue
The screen is not clear. The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
Check that the resolution and frequency of the PC and graphics card are set within a range
compatible with the product. Then, change the screen settings if required by referring to the
Additional Information on the product menu and the Standard Signal Mode Table.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen colour is inconsistent.
Go to Picture and adjust the Colour Space settings.
White does not really look white.
Go to Picture and adjust the White Balance settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
The product will turn off automatically.
Go to System and make sure Sleep Timer is set to Off.
Press any key on the keyboard or move the mouse to return to the previous screen.
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off
after 10 to 15 minutes.
Picture quality of the product is different from the dealer
shop where it was purchased.
Use an HDMI cable to obtain high-definition (HD) picture quality.
The screen display does not look normal.
Encoded video content may cause the display to appear corrupted in scenes featuring fast
moving objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does
not mean the product is defective.
A cell phone within a distance of one-meter radius may cause static on analogue and digital
products.
172
Screen issue
The brightness and colour do not look normal.
Go to Picture and adjust the screen settings such as Picture Mode, Colour, Brightness and
Sharpness.
Go to System and adjust the Energy Saving settings.
Reset the screen settings to the default settings.
Broken lines are displayed on the edges of the screen.
If Picture Size is set to Screen Fit, change the setting to 16:9.
Lines (red, green or blue) are displayed on the screen.
These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor.
Contact a Samsung Service Centre to resolve the issue.
The display looks unstable and then freezes.
The screen may freeze when a resolution other than the recommended resolution is used or
if the signal is not stable. To resolve the issue, change the PC resolution to the recommended
resolution.
The screen cannot be displayed in full screen.
A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen.
A video with an aspect ratio different from the product can cause black bars at the top and
bottom of the screen.
Change the screen size setting to full screen on the product or source device.
Sound issue
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your
PC sound card or software programme.
173
Sound issue
Video is available but there is no sound.
If an HDMI cable is connected, check the audio output settings on the PC.
Go to Sound and change Speaker Settings to Internal.
If a source device is used
•• Make sure the audio cable is properly connected to the audio input port on the product.
•• Check the audio output settings for the source device.
(For example, if an HDMI cable is connected to the monitor, the audio setting for the
cable box may need to be changed to HDMI.)
If a DVI-HDMI cable is used, a separate audio cable is required.
If the product has a headphone port, make sure nothing is connected to it.
Reconnect the power cable to the device and then reboot the device.
There is static coming from the speakers.
Check the cable connection. Make sure a video cable is not connected to an audio input port.
Check the signal strength after connecting a cable.
Low signal level can cause corrupted sound.
There is audible sound when the volume is muted.
When Speaker Settings is set to External, the volume button and mute function are disabled.
Adjust the volume for the external speakers.
Audio settings for main speakers are separate from the internal speakers on the product.
Changing or muting the volume on the product does not affect an external amplifier(decoder).
Sound from the monitor does not change after Sound
Mode is changed.
Audio settings for main speakers are separate from the internal speakers on the product.
There is an echo sound coming from the speakers.
Different decoding speeds between the product speakers and external speakers can cause an
echo.
Audio settings on a source device do not affect the internal speaker settings on the product.
In this case, set Speaker Settings to External.
174
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
Touch function issues
The touch function does not work.
Make sure not to use an object other than your finger when tapping the screen.
Make sure the screen or your finger is not wet.
Make sure you are not wearing a glove and your finger is not dirty.
The touch function is not working properly in a programme.
If a Windows or Mac programme not provided with Samsung monitors or a programme
installed on your PC is not working properly, contact the original software vendor.
A programme is not working properly.
175
Other issue
The product smells like plastic.
The plastic smell is normal and disappears over time.
The monitor appears tilted.
Remove and then attach the stand again to the product.
Audio or video cuts out intermittently.
Check the cable connection and connect it again if required.
Using a very hard or thick cable may corrupt audio and video files.
Make sure cables are flexible enough to ensure durability. When mounting the product onto a
wall, it is recommended to use right-angle cables.
Small particles are found on the edges of the product.
The particles are part of the product design. The product is not defective.
The PIP menu is not available.
The menu is enabled or disabled depending on the Source mode.
When I try to change the PC resolution, a message "The
defined resolution is not supported." appears.
The message "The defined resolution is not supported." appears if the input source resolution
exceeds the maximum resolution of the display.
To resolve the issue, change the PC resolution to a resolution supported on the display.
There is no sound from the speakers in HDMI mode when a
DVI-HDMI cable is connected.
DVI cables do not transmit sound data.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
This function is available only when a source device, such as a DVD player and STB, is
connected to the product via an HDMI (RGB signal) cable.
There is no sound in HDMI mode.
Displayed picture colours may not look normal. Video or sound may not be available. This can
occur if a source device that only supports an older version of the HDMI standard is connected
to the product.
Make sure to connect the audio cable to the correct input jack to enable audio.
If these issues occur, connect an audio cable along with the HDMI cable.
Some PC graphics cards may not automatically recognize HDMI signals that do not include
sound. In this case, manually select a sound input.
Sound input
Screen mode
PC
Auto
PC settings
DVI PC
Audio In (Stereo ports)
PC settings
176
Other issue
The IR sensor is not functioning.
Make sure the sensor light turns on when a button is pressed on the remote control.
•• If the sensor light does not turn on, turn the power switch off and then on again on the
back of the product.
(The power LED lights up red when the screen is switched off.)
If the sensor light still does not turn on after the power switch is turned off and then on
again, an internal jack may be disconnected.
Contact your nearest service centre to have the product serviced.
•• If the sensor light that is on does not flash red when a button is pressed on the remote
control, the IR sensor may be defective.
Contact your nearest service centre to have the product serviced.
•• This function is available only when a source device, such as a DVD player and STB, is
connected to the product via an HDMI (RGB signal) cable.
177
Q&A
Question
How can I change the frequency?
Answer
Set the frequency on your graphics card.
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings →
Advanced → Monitor and adjust the frequency in Monitor Settings.
•• Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor
and adjust the frequency in Monitor Settings.
–– Refer to the user manual for your
PC or graphics card for further
instructions on adjustment.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings → Advanced Settings → Monitor and adjust the frequency in
Monitor Settings.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust
resolution → Advanced Settings → Monitor and adjust the frequency in
Monitor Settings.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust resolution → Advanced Settings → Monitor and adjust the frequency in Monitor
Settings.
How can I change the resolution?
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings and
adjust the resolution.
•• Windows ME/2000: Go to Control Panel → Display → Settings and adjust the resolution.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings and adjust the resolution.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust
Resolution and adjust the resolution.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust Resolution and adjust the resolution.
178
Question
How do I set powersaving mode?
Answer
•• Windows XP: Set power-saving mode in Control Panel → Appearance and Themes →
Display → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows ME/2000: Set power-saving mode in Control Panel → Display → Screen Saver
Settings or BIOS SETUP on the PC.
•• Windows Vista: Set power-saving mode in Control Panel → Appearance and
Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 7: Set power-saving mode in Control Panel → Appearance and Personalization
→ Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 8: Set power-saving mode in Settings → Control Panel → Appearance and
Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
179
Chapter 15
Specifications
General
–– Size
Model Name
Panel
–– Display area
DM65E-BC
Size
65 CLASS (64.5 inches / 163.9 cm)
Display area
1428.5 mm (H) x 803.5 mm (V) / 56.2 inches (H) x 31.6 inches (V)
Audio Output
10 W + 10 W
Power Supply
AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
H
Refer to the label at the back of the product as the standard voltage can vary in different countries.
V
Environmental
considerations
Operating
Temperature : 32 F – 104 F (0 C – 40 C), With PIM : 50 F – 104 F (10 C – 40 C)
Humidity : 10% – 80%, non-condensing
Storage
Temperature : -4 F – 113 F (-20 C – 45 C)
Humidity : 5% – 95%, non-condensing
180
――Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system
optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired.
――Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does
not affect product performance.
――This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate
measures.
――For detailed device specifications, visit the Samsung Electronics website.
[Recommendation] - EU Only
•• Hereby, Samsung Electronics, declares that this Monitor is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
•• The official Declaration of Conformity may be found at http://www.samsung.com/displaysolutions, go to
Support > Search Product Support and enter the model name.
•• This equipment may only be used indoors.
•• This equipment may be operated in all EU countries.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799
181
Preset Timing Modes
――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a
resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution
specified for your product.
――Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the
vertical frequency to 60Hz using the CDT product before you exchange it with the LCD product.
–– Horizontal Frequency
The time required to scan a single
line from the left to the right side of
the screen is called a horizontal cycle.
The reciprocal number of a horizontal
cycle is called horizontal frequency.
Horizontal frequency is measured in
kHz.
–– Vertical Frequency
The product displays a single image
multiple times per second (like a
fluorescent light) to display what
the viewer sees. The rate of a single
image being displayed repeatedly per
second is called vertical frequency
or refresh rate. Vertical frequency is
measured in Hz.
Model Name
Synchronization
Resolution
DM65E-BC
Horizontal Frequency
30 - 81 kHz
Vertical Frequency
48 - 75 Hz
Optimum resolution
1920 x 1080 @ 60 Hz
Maximum resolution
1920 x 1080 @ 60 Hz
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal
transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings
according to the following table by referring to the graphics card user manual.
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
182
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1366 x 768
47.712
59.790
85.500
+/+
VESA,1440 x 900
55.935
59.887
106.500
-/+
VESA,1600 x 900
60.000
60.000
108.000
+/+
VESA,1680 x 1050
65.290
59.954
146.250
-/+
VESA,1920 x 1080
67.500
60.000
148.500
+/+
183
Chapter 16
Appendix
Responsibility for the Pay Service (Cost to
Customers)
――When the service is requested, in spite of in warranty, we may charge you for a visit from a
service technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•• If a service technician gives instructions on how to use product or simply adjusts options
without disassembling product.
•• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal,
etc.)
•• If a product is reinstalled or devices are connected additionally after installing the
purchased product for the first time.
•• If a product is reinstalled to move to a different spot or to move to a different house.
•• If customer requests instructions on how to use because of another company's product.
•• If customer requests instructions on how to use the network or another company's
programme.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•• External impact or drop.
•• Use of supplies or separatly sold product unspecified by Samsung.
•• Repair from a person besides an engineer of outsourcing service company or partner of
Samsung Electronics Co., Ltd.
•• Remodeling or repairing the product by customer.
•• Using it with incorrect voltage or non-authorised electrical connections.
•• Not following the "cautions" in User Manual.
Others
•• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head,
Vibrator, Lamp, Filter, Ribbon, etc.)
――If customer requests a service in case the product has no defect, service fee may be charged.
So please read User Manual first.
•• If customer requests software installation and setup for the product.
•• If a service technician removes/cleans dusts or foreign materials inside of the product.
•• If customer requests an installation additionally after purchasing a product through
home-shopping or online.
184
Optimum Picture Quality and Afterimage
Burn-in Prevention
Black Matrix
Common
Electrode (ITO)
Colour-Filter
Optimum Picture Quality
•• Due to the nature of the manufacturing of this product, approximately 1 pixel per million
(1ppm) may be brighter or darker on the panel. This does not affect product performance.
–– The number of sub-pixels by panel type: 6,220,800
Source
Drain
•• Run Auto Adjustment to improve the picture quality. If noise is still found even after auto
adjustment, adjust Coarse or Fine.
•• Leaving the screen fixed on a stationary image for an extended period of time may cause
afterimage burn-in or defective pixels.
–– Activate power-saving mode or a dynamic screen saver if you will not be using the
product for an extended period of time.
TFT
Gate
Pixel Electrode (ITO)
Storage
Capaccitor (Cs)
Data Bus-Line
Prevention of Afterimage Burn-in
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal
operation refers to a continuously changing video pattern. If the LCD panel displays a fixed
pattern for an extended period of time (more than 12 hours), a slight voltage difference may
occur between the electrodes in pixels that control the liquid crystals.
Such a voltage difference between electrodes increases with time and makes the liquid crystals
thinner. When this occurs, a previous image can remain on the screen when the pattern changes.
To prevent this, the accumulated voltage difference should be reduced.
――Afterimage burn-in should not occur when an LCD panel is operating in proper conditions.
185
Preventing afterimage burn-in
――The best way to protect the product from afterimage burn-in is switching the power off or
setting the PC or system to run a screen saver when not in use. Also, Warranty service may be
limited depending on instruction guide.
•• Powering Off, Screen Saver and Power Saving Mode
–– Power off the product for 2 hours after using it for 12 hours.
–– Go to Display Properties > Power Supply on your PC and set the product to power off as
required.
–– Using a screen saver is recommended.
It is best to use a single-colour or moving-image screen saver.
•• Regular colour Change
–– Use 2 colours
Switch between 2 colours every 30 minutes as shown above.
Type 1
•• Regular Text colour Change
–– Use bright colours of similar brightness.
Interval: Change text colour and background colour every 30 minutes
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
–– Move and change text every 30 minutes as shown below.
Type 2
FLIGHT
TIME
FLIGHT
TIME
OZ348
20:30
OZ348
20:30
UA102
21:10
UA102
21:10
[ Step 1 ]
[ Step 2 ]
•• Avoid combinations of a text colour and background colour of contrasting brightness.
(Brightness: refers to the lightness or darkness of a colour which varies depending on the
amount of light emitted.)
――Avoid using grey as it may contribute to afterimage burn-in.
――Avoid using colours of contrasting brightness (black and white; grey).
FLIGHT : TIME
FLIGHT : TIME
OZ348 : 20:30
OZ348 : 20:30
[ Step 3 ]
–– Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4
hours.
186
Licence
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
DivX Certified® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX,
LLC and are used under license.
Manufactured under a license from U.S. Patent No’s: 5,956,674,
5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567,
7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol,
and DTS and the Symbol together are registered trademarks & DTS
Premium Sound is a trademark of DTS, Inc. ©2012 DTS, Inc. All Rights
Reserved.
Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477,
5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236,
7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802.
DTS, the Symbol, and DTS and the Symbol together are registered
trademarks & DTS Studio Sound is a trademark of DTS, Inc. ©2012 DTS,
Inc. All Rights Reserved.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your
registration code in the DivX VOD section of your device setup menu.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710;
8,656,183; 8,731,369; RE45,052.
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the
product menu. Open Source Licence Notice is written only English.
For information on the Open Source Licence Notice, contact the Samsung Customer Centre
or send email to oss.request@samsung.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
187
Terminology
480i / 480p / 720p / 1080i /
1080p____ Each of the scanning
rates above refers to the number of
effective scanning lines that decides
the screen resolution. The scanning
rate may be indicated in i (interlaced)
or p (progressive), depending on the
scanning method.
- Scanning
Scanning refers to a process of
sending pixels that form an image
progressively. A larger number of
pixels will deliver a clearer and more
vivid picture.
- Progressive
In progressive scan mode, all lines
of pixels are scanned one by one
(progressively) on the screen.
- Interlaced
In interlaced scan mode, every
other line of pixels is scanned from
top to bottom first and then the
remaining lines of pixels (that were
not scanned) are scanned.
Non-interlace Mode and Interlace
Mode____ Non-interlace mode
(progressive scan) displays a
horizontal line from the top to the
bottom of a screen progressively.
Interlace mode displays the odd
number lines first and the even
number lines next. Non-interlace
mode is mainly used in monitors
as it produces screen clarity and
interlace mode is mainly used in
TVs.
Vertical Frequency____ The product
displays a single image many times
per second (like a fluorescent light
that flickers) to display an image for
a viewer to see. The rate of a single
image being displayed repeatedly
per second is called vertical
frequency or refresh rate. Vertical
frequency is measured in Hz.
E.g. 60Hz refers to a single image
being displayed 60 times in one
second.
Dot Pitch____ The screen consist of
red, green and blue dots. A shorter
distance between the dots produces
a higher resolution. Dot pitch refers
to the distance between the shortest
distance between dots of the same
colour. Dot pitch is measured in
millimeters.
Horizontal Frequency____ The
time required to scan a single line
from the left to the right side of
the screen is called a horizontal
cycle. The reciprocal number of a
horizontal cycle is called horizontal
frequency. Horizontal frequency is
measured in kHz.
Source____ Input source refers to
a video source device connected to
the product such as a camcorder or
video or DVD player.
Plug & Play____ Plug & Play is a
function that allows the automatic
exchange of information between
a monitor and PC to produce an
optimum display environment.
The product uses VESA DDC
(international standard) to execute
Plug & Play.
Resolution____ Resolution is the
number of horizontal dots (pixels)
and vertical dots (pixels) that
form a screen. It represents the
level of display detail. A higher
resolution enables more data to
be displayed on the screen and is
useful to perform multiple tasks
simultaneously.
E.g. A resolution of 1920 X 1080
consists of 1,920 horizontal pixels
(horizontal resolution) and 1,080
vertical pixels (vertical resolution).
DVD (Digital Versatile Disc)____
DVD refers to a CD-sized mass
storage disk where you can save
multimedia (audio, video or game)
applications using MPEG-2 video
compression technology.
HDMI (High Definition Multimedia
Interface)____ It is an interface that
can be connected to a digital audio
source as well as a high-definition
video source by using a single cable
without compression.
Multiple Display Control (MDC)____
MDC (Multiple Display Control) is
an application that allows multiple
display devices to be controlled
simultaneously using a PC.
Communication between a PC and
monitor takes place using RS232C
(serial data transmission) and RJ45
(LAN) cables.
188
Download PDF