Samsung | RH55E | Samsung SMART Signage TV RH55E LED Benutzerhandbuch

SMART Signage TV
User Manual
RH48E RH55E
The colour and the appearance may differ depending on the product, and the
specifications are subject to change without prior notice to improve the performance.
Recommended hours of use per day of this product is under 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
Table of contents
Before Using the Product
Copyright7
Safety Precautions
8
Symbols8
Cleaning8
Storage9
Electricity and Safety
9
Installation10
Operation12
Preparations
Checking the Components
16
Components16
Parts17
Control Panel 17
Reverse Side
19
Anti-theft Lock
20
Remote Control
21
Before Installing the Product (Installation
Guide)23
Tilting Angle and Rotation
23
Ventilation23
Dimensions24
Installing the Wall Mount
Installing the Wall Mount Kit
Wall Mount Kit Specifications (VESA)
Connecting and Using a Source
Device
Home feature
Before Connecting
Pre-connection Checkpoints
27
27
Connecting to a PC
Connection using the D-SUB cable
(Analogue type)
Connection Using an HDMI Cable
Connection Using an HDMI-DVI Cable
27
Connecting to a Video Device
Connection Using the AV Cable
Connection Using an HDMI-DVI Cable
Connection Using an HDMI Cable
29
29
30
30
Connecting to an Audio System
31
Connecting the antenna
31
Connecting the LAN Cable
32
Connecting to a TV Viewing Card slot
To connect the CI CARD, follow these steps:
33
33
27
28
28
Changing the Input source
34
Source34
Player35
Published Content36
My Templates36
Available features in the Player page
37
Player page Settings menu
38
When Content is Running
40
File Formats Compatible with Player42
Clone Product47
ID Settings48
Device ID48
PC Connection Cable48
Connectivity49
Network Settings49
Wi-Fi Direct49
Network Status50
Picture Mode51
On/Off Timer52
On Timer52
Off Timer53
Holiday Management53
Ticker54
More settings54
25
25
26
2
Table of contents
Screen Adjustment
Picture Mode55
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)56
Colour Temperature57
White Balance58
2 Point58
10 Point58
Gamma59
Calibrated value59
Advanced Settings60
Dynamic Contrast61
Black Tone61
Flesh Tone61
RGB Only Mode61
Colour Space61
Motion Lighting61
Picture Options62
Colour Tone63
Digital Clean View63
MPEG Noise Filter63
HDMI Black Level64
Film Mode64
Dynamic Backlight64
Picture Size65
Picture Size65
Position66
Zoom/Position66
4:3 Screen Size67
Resolution67
Sound Adjustment
Auto Adjustment68
Picture Off69
Sound Effect79
Virtual Surround79
Dialog Clarity79
Equaliser79
Reset Picture69
HDMI Sound80
PC Screen Adjustment68
Sound Mode78
Dolby Digital Comp80
OnScreen Display
PIP70
PIP Settings
70
Display Orientation72
Onscreen Menu Orientation72
Source Content Orientation72
Aspect Ratio72
Screen Protection73
Auto Protection Time73
Screen Burn Protection73
Message Display76
Source Info76
No Signal Message76
MDC Message76
Menu Language77
Reset OnScreen Display77
Speaker Settings81
Sound Output81
Auto Volume82
Audio Format82
Reset Sound83
Broadcasting
Auto Tuning84
Auto Tuning84
Cable Search Option85
Aerial86
Channel List87
Added Ch.87
Favourites 1 ~ Favourites 587
Options87
3
Table of contents
Guide88
Schedule Manager89
Edit Channel90
Edit Channel Number92
Edit Favourites93
Audio Options96
Audio Language96
Audio Format96
Programme Rating Lock97
Channel Lock98
Common Interface99
CI Menu99
CAM video transcoding99
Application Info99
Channel Settings100
Country (Area)100
Manual Tuning100
Fine Tune101
Transfer Channel List101
Delete CAM Operator Profile101
Digital Text102
Teletext Language102
Network
Network Status103
Network Settings103
Network type103
Network Settings (Wired)
104
Network Setting (Wireless)
106
WPS(PBC)108
Wi-Fi Direct109
Multimedia Device Settings109
Screen Mirroring110
Screen Mirroring110
Device Name110
System
Accessibility111
Audio Description111
Subtitle111
Menu Transparency112
High Contrast112
Enlarge112
Setup113
Initial settings (Setup)113
Time115
Clock115
DST116
Sleep Timer116
Auto Source Switching117
Auto Source Switching117
Primary Source Recovery117
Primary Source117
Secondary Source117
Power Control118
Auto Power On118
Max. Power Saving118
Standby Control119
Network Standby119
Eco Solution120
Energy Saving120
Eco Sensor120
Screen Lamp Schedule120
No Signal Power Off121
Auto Power Off121
Temperature Control121
Device Manager122
Keyboard Settings122
Mouse Settings124
Change PIN125
Security126
Safety Lock126
Button Lock126
USB Auto Play Lock126
Mobile Connection Lock127
General128
4
Table of contents
Smart Security128
BD Wise129
Anynet+ (HDMI-CEC)130
Troubleshooting for Anynet+
132
HDMI Hot Plug134
DivX® Video On Demand134
Game Mode134
Reset System135
Support
Self Diagnosis136
Signal Information136
Reset136
More settings140
Reset All141
Playing photos, videos and music
(Media Play)
146
147
Available buttons and features during photo
playback148
Use Mode137
Available buttons and features during video
playback149
Go to Home139
Player139
Clone Product139
ID Settings139
Connectivity139
Network Status140
Picture Mode140
On/Off Timer140
Ticker140
162
Specifications
General164
Software Update137
Update now137
Auto update137
Contact Samsung138
Requirements Before Contacting Samsung
Customer Service Centre
154
Testing the Product
154
Checking the Resolution and Frequency
154
Check the followings.
155
Q & A
Read the following before using media play with
a USB device
142
Using a USB device
144
Playing media content from a
PC/mobile device
145
Features provided in the media
content list page
Menu items in the media content list page
Troubleshooting Guide
Power Consumption
166
Preset Timing Modes
167
Available buttons and features during music
playback150
Supported Subtitle and Media play
file formats
151
Subtitle151
Supported image resolutions
151
Supported music file formats
152
Supported Video Formats
152
5
Table of contents
Appendix
Responsibility for the Pay Service (Cost to
Customers)169
Not a product defect
169
A Product damage caused by customer's fault 169
Others169
WEEE170
Correct Disposal of This Product (Waste Electrical &
Electronic Equipment)
170
Correct disposal of batteries in this product
170
Optimum Picture Quality and Afterimage Burnin Prevention
171
Optimum Picture Quality
171
Prevention of Afterimage Burn-in
171
Licence173
Terminology174
6
Chapter 01
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2015 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
•• An administration fee may be charged if either
-- (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
-- (b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
•• The amount of such administration charge will be advised to you before any work or home visit is carried out.
7
Safety Precautions
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Caution
――Take the following steps when cleaning.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
――Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
This symbol indicates that high voltage is present inside.
3
It is dangerous to make any kind of contact with any internal part of this product.
Wipe the product with a clean, soft and dry cloth.
•• Do not use detergents that contain alcohol, solvent or
surface-active agents.
This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.
!
•• Do not spray water or detergent directly on the product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
4
Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the product.
Caution
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
5
Connect the power cord to the product when cleaning is finished.
6
Power on the product and computer.
Instructions marked by this symbol must be followed.
8
Storage
Connect the power plug to a grounded power socket (type 1 insulated
devices only).
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create whitecoloured stains on the product.
――Contact Customer Service Centre if the inside of the product needs cleaning (service fee will be
•• An electric shock or injury may result.
!
Do not bend or pull the power cord with force. Be careful not to leave the
power cord under a heavy object.
charged).
Electricity and Safety
•• Damage to the cord may result in a fire or electric shock.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Do not place the power cord or product near heat sources.
•• A fire or electric shock may result.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•• An electric shock or fire may result.
Clean any dust around the pins of the power plug or the power socket with
a dry cloth.
•• A fire may result.
Do not use multiple products with a single power socket.
•• Overheated power sockets may cause a fire.
!
Do not touch the power plug with wet hands. Otherwise, an electric shock
may result.
Insert the power plug all the way in so it is not loose.
•• An unsecure connection may cause a fire.
!
9
Installation
Caution
Do not disconnect the power cord while the product is being used.
•• The product may become damaged by an electric shock.
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•• A fire may result.
Only use the power cord provided with your product by Samsung. Do not
use the power cord with other products.
•• A fire or electric shock may result.
Have a technician install the wall-mount hanger.
!
•• Installation by an unqualified person can result in an injury.
•• Only use approved cabinets.
Keep the power socket where the power cord is connected unobstructed.
•• The power cord must be disconnected to cut off power to the product
when an issue occurs.
!
!
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
•• Note that the product is not completely powered down by using only
the power button on the remote.
•• An increased internal temperature may cause a fire.
Hold the plug when disconnecting the power cord from the power socket.
•• An electric shock or fire may result.
Install the product at least 10 cm away from the wall to allow ventilation.
•• An increased internal temperature may cause a fire.
!
!
Keep the plastic packaging out of the reach of children.
•• Children may suffocate.
!
10
Bend and keep part of the outdoor TV antenna cable hanging downwards
(the part inside the room) to prevent rainwater from entering the product.
Edible oil, such as soybean oil, can damage or deform the product. Do not
install the product in a kitchen or near a kitchen counter.
•• If rainwater enters the product, a fire or electric shock can occur.
!
When using an outdoor antenna, be sure to install the antenna away from
nearby power lines to prevent the antenna from collapsing onto them in
strong winds.
•• A collapsed antenna can cause an electric shock or injury.
!
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)
•• The product may fall and become damaged and/or cause an injury.
•• Using the product in an area with excess vibration may damage the
product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture
(water drips, etc.), oil, or smoke.
•• A fire or electric shock may result.
!
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
•• The product lifespan may be reduced or a fire may result.
Do not install the product within the reach of young children.
•• The product may fall and injure children.
•• As the front is heavy, install the product on a flat and stable surface.
11
Operation
Caution
Do not drop the product while moving.
•• Product failure or personal injury may result.
Warning
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
!
•• A fire or electric shock may result.
Do not set down the product on its front.
•• Contact Samsung Customer Service Centre for repairs.
•• The screen may become damaged.
Before moving the product, turn off the power switch and disconnect the
power cord, antenna cable and all other connected cables.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•• Damage to the cord may result in a fire or electric shock.
!
•• The product may fall and become damaged and/or cause an injury.
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Centre.
•• Install the product only on cabinets or shelves of the right size.
Set down the product gently.
•• Product failure or personal injury may result.
•• An electric shock or fire may result.
!
Do not let children hang from the product or climb on top of it.
!
•• Children may become injured or seriously harmed.
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
dust, chemical substances, extreme temperatures or a significant presence
of moisture, or a place where the product will operate continuously for an
extended period of time) may seriously affect its performance.
•• Be sure to consult Samsung Customer Service Centre if you want to
install the product at such a place.
If the product is dropped or the outer case is damaged, turn off the power
switch and disconnect the power cord. Then contact Samsung Customer
Service Centre.
•• Continued use can result in a fire or electric shock.
12
Do not leave heavy objects or items that children like (toys, sweets, etc.) on
top of the product.
Do not use or keep combustible spray or an inflammable substance near
the product.
•• The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.
•• An explosion or fire may result.
!
During a lightning or thunderstorm, remove the power cable and do not
touch the antenna cable.
Ensure the vents are not blocked by tablecloths or curtains.
•• An increased internal temperature may cause a fire.
•• A fire or electric shock may result.
!
Do not drop objects on the product or apply impact.
•• A fire or electric shock may result.
!
Do not move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged
cable.
If a gas leakage is found, do not touch the product or power plug. Also,
ventilate the area immediately.
•• Sparks can cause an explosion or fire.
!
100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Centre.
•• Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Centre.
•• Product failure, an electric shock or fire may result.
GAS
Do not lift or move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged
cable.
13
Caution
Rest your eyes for more than 5 minutes for every 1 hour of product use.
•• Eye fatigue will be relieved.
Leaving the screen fixed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.
•• Activate power-saving mode or a moving-picture screen saver if you
will not be using the product for an extended period of time.
!
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
!
-_-
Disconnect the power cord from the power socket if you do not plan on
using the product for an extended period of time (vacation, etc).
•• Dust accumulation combined with heat can cause a fire, electric shock
or electric leakage.
Store small accessories out of the reach of children.
!
Use the product at the recommended resolution and frequency.
•• Your eyesight may deteriorate.
!
Exercise caution when adjusting the product angle or stand height.
!
•• Your hand or finger may get stuck and injured.
Do not hold the product upside-down or move it by holding the stand.
•• The product may fall and become damaged or cause an injury.
!
•• Tilting the product at an excessive angle may cause the product to fall
and an injury may result.
Do not place heavy objects on the product.
•• Product failure or personal injury may result.
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
When using headphones or earphones, do not turn the volume too high.
!
•• Having the sound too loud may damage your hearing.
Do not use humidifiers or stoves around the product.
•• A fire or electric shock may result.
14
Be careful that children do not place the battery in their mouths when
removed from the remote control. Place the battery in a location that
children or infants cannot reach.
•• If children have had the battery in their mouths, consult your doctor
immediately.
When replacing the battery, insert it with the right polarity (+, -).
•• Otherwise, the battery may become damaged or it may cause fire,
personal injury or damage due to leakage of the internal liquid.
Use only the specified standardized batteries, and do not use a new battery
and a used battery at the same time.
•• Otherwise, the batteries may be damaged or cause fire, personal injury
or damage due to a leakage of the internal liquid.
!
The batteries (and rechargeable batteries) are not ordinary refuse and must
be returned for recycling purposes. The customer is responsible for returning
the used or rechargeable batteries for recycling.
!
•• The customer can return used or rechargeable batteries to a nearby
public recycling centre or to a store selling the same type of the
battery or rechargeable battery.
15
Chapter 02
Preparations
Checking the Components
Components
――Components may differ in different locations.
-- Contact the vendor where you
purchased the product if any
components are missing.
-- The appearance of the components may
differ from the images shown.
Quick Setup Guide
-- A stand is not provided with the product.
To install a stand, you can purchase one
separately.
Warranty card
(Not available in some locations)
Remote Control
Power cord
Stand neck
CI Slot Gender
Regulatory guide
Mini Wall-mount Kit
Batteries
(Not available in some locations)
Stand base
16
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to
Parts
improve quality.
Panel Key
Control Panel
Buttons
Description
Power on the product.
If you press the button when the product is turned on, the control menu will be
displayed.
――To exit the OSD menu, press and hold the panel key for at least one second.
PC IN
LAN
POWER
USB
(0.5A)
PC
AUDIO
IN
AV IN
AUDIO
OUT
VIDEO
USB
(1.0A)
HDMI 3
L AUDIO R
HDMI 2
(ARC)
HDMI 1
RS232C IN
ANT IN
Move to the upper or lower menu. You can also adjust the value of an option.
――Change the channel in TV mode.
Move to the left or right menu.
――You can adjust the volume by moving the panel key left or right when the control
Speaker
menu is not displayed.
Remote sensor
Press a button on the remote control pointing at the sensor on the front of the
product to perform the corresponding function.
――Using other display devices in the same space as the remote control of this
product can cause the other display devices to be inadvertently controlled.
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30 from the left and right.
――Store used batteries out of reach of children and recycle.
――Do not use a new and used battery together. Replace both batteries at the same time.
Panel Key
――Remove batteries when the remote control is not to be used for an extended period of time.
Remote sensor
17
――If you press the
button on the panel key when the product is turned on, the
control menu will be displayed.
Buttons
Description
Select the connected input source.
Control menu
Source
Move the panel key right to select Source
in the control menu. When the list of
input sources is displayed, move the panel key left or right to select the desired input
source. Next, press the panel key.
Display the OSD menu.
Menu
Home
Move the panel key left to select Menu
in the control menu. The OSD control
screen will appear. Move the panel key right to select the desired menu. You can
select a sub-menu item by moving the panel key up, down, left, or right. To change
settings, select the desired menu and press the panel key.
Enter Go to Home mode.
Move the panel key up to select Home
in the control menu.
Power off the product.
Power off
Move the panel key down to select Power off
the panel key.
Return
Exit the control menu.
Return
in the control menu. Next, press
18
Reverse Side
Port
――The colour and shape of parts may differ from what is shown. Specifications are
COMMON INTERFACE
Connect to a CI card.
PC IN
Connects to a source device using a D-SUB cable.
LAN
Connects to MDC using a LAN cable.
subject to change without notice to improve quality.
COMMON INTERFACE
USB
Description
(0.5A), USB
(1.0A)
Connect to a USB memory device.
HDMI 1, HDMI 2 (ARC), HDMI 3
Connects to a source device using an HDMI cable.
ANT IN
Connect to an antenna cable.
AV IN VIDEO / L-AUDIO-R
Connect to an external device using a video or Audio cable.
PC AUDIO IN
Receives sound from a PC via an audio cable.
AUDIO OUT
Connects to the audio of a source device.
RS232C IN
Connects to MDC using an RS232C adapter.
PC IN
PC IN
LAN
USB
(0.5A)
PC
AUDIO
IN
AV IN
AUDIO
OUT
VIDEO
HDMI 2
(ARC)
HDMI 1
HDMI 3
L AUDIO R
LAN
USB
(1.0A)
RS232C IN
ANT IN
USB
(0.5A)
USB
(1.0A)
PC
AUDIO
IN
HDMI 1
AV IN
VIDEO
AUDIO
OUT
ANT IN
HDMI 3
L AUDIO R
HDMI 2
(ARC)
RS232C IN
19
Anti-theft Lock
――An anti-theft lock allows you to use the product securely even in public places.
――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
――The following images are for reference only. Real-life situations may differ from what is shown in the images.
To lock an anti-theft locking device:
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
-- An anti-theft locking device can be purchased separately.
-- Refer to the user guide provided with your anti-theft locking device for details.
-- Anti-theft locking devices can be purchased at electronics retailers or online.
20
Remote Control
――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
――A button without a description in the image below is not supported on the product.
Display and select available video sources.
Turns the product On/Off.
Have direct access to channels.
-- Remote control button functions may
differ for different products.
Alternately selects Teletext, Double or Mix.
TTX/MIX
PRE-CH
Cut off the sound temporarily.
Adjust the volume.
Display channel list on the screen.
Returns to the previous channel.
Change channels.
CH LIST
Go to Home Launch Button.
Display the main on-screen menu.
HOME
GUIDE
Electronic Programme Guide (EPG) display.
21
Display information about the current input
source.
Quickly select frequently used functions.
Move to the upper, lower, left or right menu, or
adjust an option's setting.
Confirm a menu selection.
Return to the previous menu.
It sets safe lock function.
Activates/deactivates PIP. Selects the input source
for the PIP window.
Exit the current menu.
PC
AV
HDMI
MagicInfo E
A
B
C
D
Manually select a connected input source from PC,
HDMI, AV or MagicInfo E.
PIP PIC SIZE LOCK
Play photos, videos or music.
Changes the picture size.
-- Remote control button functions may
differ for different products.
To place batteries in the remote control
22
Before Installing the Product
(Installation Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
•• Ensure that an authorized installation company installs the wall mount.
•• Otherwise, it may fall and cause personal injury.
•• Make sure to install the specified wall mount.
Tilting Angle and Rotation
15 ˚
――Contact Samsung Customer Service Centre for further details.
•• The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
•• To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35 C
A
•• When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface
for ventilation and ensure that the ambient A temperature is kept below 35 C.
B
Figure 1.1 Side view
23
Figure 1.3 Side view
Installation on an Indented Wall
――Contact Samsung Customer Service Centre for further details.
B
D
D
Plane view
A Minimum 40 mm
B Minimum 70 mm
A
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35 C
――When installing the product on an indented wall, allow at least the space specified above between the product and wall for
ventilation and ensure that the ambient temperature is kept below 35 C.
C
E
Figure 1.2 Side view
Dimensions
Unit: mm (inches)
Model name
5
1
2
4
1
1 2
23
34
45
RH48E
1076.1(42.4)
1056.1(41.6)
594.7(23.4)
624.4(24.6)
67.1(2.6)
RH55E
1231.6(48.5)
1211.6(47.7)
682.3(26.9)
711.9(28.0)
67.8(2.7)
――All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors.
3
24
Installing the Wall Mount
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
25
Wall Mount Kit Specifications (VESA)
――Install your wall mount on a solid wall perpendicular to the floor. Before
attaching the wall mount to surfaces other than plaster board, please contact
your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe
personal injury.
•• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
•• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
•• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
•• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
•• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
•• Do not mount the product at more than a 15 degree tilt.
•• Always have two people mount the product on a wall.
•• Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
Model name
VESA screw hole specs
(A * B) in millimeters
Standard Screw
Quantity
RH48E
400 x 400 (15.7 x 15.7)
M8
4
RH55E
――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
26
Chapter 03
Connecting and Using a Source Device
Before Connecting
Pre-connection Checkpoints
――Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
――Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
――Connect the sound ports correctly: left = white and right = red.
Connecting to a PC
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
――Connecting parts may differ in different products.
Connection using the D-SUB cable (Analogue type)
――Check the types of ports at the back of the product you want to connect.
PC IN
LAN
USB
(0.5A)
PC
AUDIO
IN
AV IN
AUDIO
OUT
VIDEO
USB
(1.0A)
HDMI 3
L AUDIO R
HDMI 2
(ARC)
HDMI 1
RS232C IN
ANT IN
PC IN
PC AUDIO IN
27
Connection Using an HDMI Cable
Connection Using an HDMI-DVI Cable
After connecting a computer to the product with an HDMI-DVI cable, make sure to configure the settings
as shown below to enable the video and audio from the computer.
•• Sound → set HDMI Sound to PC(DVI)
PC IN
LAN
USB
(0.5A)
PC
AUDIO
IN
AV IN
AUDIO
OUT
VIDEO
USB
(1.0A)
HDMI 3
L AUDIO R
HDMI 2
(ARC)
HDMI 1
•• Picture → set each screen mode to Text under Picture Mode
RS232C IN
ANT IN
•• System → General → set HDMI Hot Plug to Off
HDMI 1, HDMI 2 (ARC), HDMI 3
PC IN
LAN
USB
(0.5A)
PC
AUDIO
IN
AV IN
AUDIO
OUT
VIDEO
USB
(1.0A)
HDMI 3
L AUDIO R
HDMI 2
(ARC)
HDMI 1
RS232C IN
ANT IN
HDMI 1, HDMI 2 (ARC), HDMI 3
PC AUDIO IN
28
Connecting to a Video Device
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• You can connect a video device to the product using a cable.
――Connecting parts may differ in different products.
――Press the SOURCE button on the remote control to change the source.
Connection Using the AV Cable
PC IN
LAN
USB
(0.5A)
PC
AUDIO
IN
AV IN
AUDIO
OUT
VIDEO
USB
(1.0A)
HDMI 3
L AUDIO R
HDMI 2
(ARC)
HDMI 1
RS232C IN
ANT IN
AV IN / VIDEO
AV IN / L-AUDIO-R
29
Connection Using an HDMI-DVI Cable
――Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To
resolve this, additionally connect an audio cable to the audio ports on the product and video device.
――After connecting a video device to the product with an HDMI-DVI cable, make sure to configure the
settings as shown below to enable the video and audio from the video device.
――Sound → set HDMI Sound to PC(DVI)
――Picture → set each screen mode to Videos/Images under Picture Mode
――System → General → set HDMI Hot Plug to On
――Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
――To view content with a video device connected to the monitor, select Picture and change
Picture Mode to Videos/Images for the optimum picture quality.
Connection Using an HDMI Cable
Using an HDMI cable (up to 1080p)
•• For better picture and audio quality, connect to a digital device using an HDMI cable.
•• An HDMI cable supports digital video and audio signals, and does not require an audio cable.
-- To connect the product to a digital device that does not support HDMI output, use an HDMIDVI and audio cables.
•• The picture may not display normally (if at all) or the audio may not work if an external device that
uses an older version of HDMI mode is connected to the product. If such a problem occurs, ask the
manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
•• Be sure to use an HDMI cable with a thickness of 14 mm or less.
•• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.
PC IN
LAN
USB
(0.5A)
PC
AUDIO
IN
AV IN
AUDIO
OUT
VIDEO
USB
(1.0A)
HDMI 3
L AUDIO R
HDMI 2
(ARC)
HDMI 1
•• A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
RS232C IN
ANT IN
HDMI 1, HDMI 2 (ARC), HDMI 3
PC IN
LAN
USB
(0.5A)
PC
AUDIO
IN
AV IN
AUDIO
OUT
VIDEO
USB
(1.0A)
HDMI 3
L AUDIO R
HDMI 2
(ARC)
HDMI 1
RS232C IN
ANT IN
AV IN / L-AUDIO-R
HDMI 1, HDMI 2 (ARC), HDMI 3
30
Connecting to an Audio System
Connecting the antenna
――Connecting parts may differ in different products.
――Connecting parts may differ in different products.
――When the product is powered on for the first time, basic settings are configured automatically. Take
extra care to ensure the wires inside the antenna cable are not bent.
PC IN
LAN
USB
(0.5A)
PC
AUDIO
IN
AV IN
AUDIO
OUT
VIDEO
USB
(1.0A)
HDMI 3
L AUDIO R
HDMI 2
(ARC)
HDMI 1
RS232C IN
ANT IN
PC IN
LAN
USB
(0.5A)
PC
AUDIO
IN
AV IN
AUDIO
OUT
VIDEO
USB
(1.0A)
HDMI 3
L AUDIO R
HDMI 2
(ARC)
HDMI 1
RS232C IN
ANT IN
AUDIO OUT
ANT IN
31
Connecting the LAN Cable
――Connecting parts may differ in different products.
PC IN
LAN
USB
(0.5A)
PC
AUDIO
IN
AV IN
AUDIO
OUT
VIDEO
USB
(1.0A)
HDMI 3
L AUDIO R
HDMI 2
(ARC)
HDMI 1
RS232C IN
ANT IN
LAN
•• Use Cat7(*STP Type) cable for the connection.
*Shielded Twist Pair
32
Connecting to a TV Viewing Card slot
To watch paid channels, the “CI or CI+ CARD” must be inserted.
――Turn the TV off to connect or disconnect a CI card.
•• If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.
To connect the CI CARD, follow these steps:
――CI card slots are available, depending on the model.
Using the “CI or CI+ CARD”
•• The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and
other information will be displayed in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
•• When the configuration of channel information has finished, the message “Updating Completed” is
displayed, indicating the channel list is updated.
――You must obtain a “CI or CI+ CARD” from a local cable service provider.
――When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI
or CI+ CARD” may cause damage to it.
――Insert the “CI or CI+ CARD” in the direction marked on the card.
――The location of the COMMON INTERFACE slot may be different depending on the model.
――“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized
dealer.
――If you have any problems, please contact a service provider.
――Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or
will not be seen.
33
Changing the Input source
Source allows you to select a variety of sources and change source device names.
Source
――The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.
You can display the screen of a source device connected to the product. Select a source from source list to display the screen
of the selected source.
――The input source can also be changed by using the SOURCE button on the remote control.
――To view detailed information about connected source devices, press the TOOLS button from the Source page.
SOURCE → Source
Edit Name
Source
SOURCE → Source → TOOLS → Edit Name → ENTER E
TV
MagicInfo Express
HDMI1
Screen Mirroring
HDMI2
To go to Options, press and hold the Enter button.
HDMI3
Customize the name of a connected external device.
――The list can include the following source devices. Source devices on the list differ depending on the selected source.
PC / Cable STB / Satellite STB / PVR STB / Game / Blu-ray / DVD / VCR / AV Receiver / Camcorder / DVI PC / DVI
Devices / TV / IPTV / HD DVD / DMA
Information
SOURCE → Source → TOOLS → Information → ENTER E
You can see detailed information about the selected external device.
-- The displayed image may differ depending on the model.
34
Chapter 04
Home feature
This feature is provided in Support → Go to Home.
Accessible using the HOME button on the remote control.
Player
HOME
Play a range of content such as channels with schedules assigned, templates or files.
Play channels or content using any of the following methods.
→ Player → ENTER E
Device Name
[Signage]
Player
Play a variety of content from internal
and external storage devices.
Internal storage
** GB available ** GB
External Storage
Not connected
Clone Product
ID Settings
Connectivity
Network Status
Picture Mode
On/Off Timer
Ticker
More settings
-- The displayed image may differ depending on the model.
35
Player
Device : All
Content : All
Sort by : File Name
Browse and play content stored on the selected device.
Options
2 item(s)
Published Content
Play a template stored on a connected USB device.
――The Published Content feature appears only when a USB device containing templates is connected.
Published Content
――Play scheduled content.
My Templates
My Templates
Play a template in My Templates stored in the internal memory of the product.
-- The displayed image may differ depending on the model.
36
Available features in the Player page
The Player list page provides the following features.
•• Device
Select either Internal or USB to search for a desired device list.
-- All / Internal / USB
•• Content
Select a content type as criterion to search for a desired content list.
-- All / Video / Image / PDF / Flash / Office / My Templates
•• Sort by
Specify the content sort criterion.
-- File name / Recently played
•• Options
Menu items in the Player page
Option Name
Operations
Play Selected
Select and play desired content.
Send
Copy content to another storage device.
Delete
Delete desired content.
Settings
Configure detailed properties of content.
――See the following page for details on the Settings feature.
37
Player page Settings menu
Default Storage
Select the storage location that you want to download scheduled channels from the network to.
Settings
•• Internal / USB
Picture Size
Settings
Set the screen size for content.
Select the storage location that you want to download scheduled
channels from the network to.
Default Storage
If Picture Size is set to Video or Image
•• Full Screen / Original Size / Fit to Screen
Internal
Picture Size
Close
Display Duration
Transition Effect
Content Orientation
Random
If Picture Size is set to PDF or Office
•• Full Screen / Original Size
――This feature is only available for Video, Image, PDF and Office files.
Landscape
Display Duration
-- The displayed image may differ depending on the model.
Set the duration for each page in a slideshow.
――This feature is only available for Image, PDF, Flash and Office files.
Transition Effect
Configure transition effects between pages or scenes in a slideshow or video file.
•• None / Fade1 / Fade2 / Blind / Spiral / Checker / Linear / Stairs / Wipe / Random
――This feature is only available for Image files.
Content Orientation
Switch the orientation of playing content to Landscape or Portrait mode.
•• Landscape / Portrait
――If Content Orientation is Portrait view, it does not support VP8 video codec.
――Source is not available when Content Orientation is set to Portrait.
38
Default content
This default content will be displayed if you run a channel while no programmes are scheduled on the channel.
•• None
Safely Remove
Safely removes USB memory
Reset
Restore all the values under Settings to the default when the product was purchased.
39
When Content is Running
Press the INFO button on the remote control.
•• Name
Viewing the details of the content that is running
•• Software Version: Displays the software version of a device
•• MAC ID: Displays the original identification number of a device
Information
•• USB: Displays the connection status of a USB device
Name
Current time :
00:00
Software Version :
DTP-EP-APP-5529
MAC ID :
FF-FF-FF-FF-FF-FF
USB :
•• Current time
•• Default Storage: View the destination folder where distributed content is saved.
――Internal is displayed if no external device is connected.
Connected
Default Storage :
Internal
OK
-- The displayed image may differ depending on the model.
40
Changing the settings for the content that is running
Press the TOOLS button on the remote control during content playback to configure settings such as Picture Mode and
Sound Mode.
•• Playlist
View a list of content items currently playing.
Playlist
Music
Picture Mode
Sound Mode
Repeat
•• Music
Set the background music for the content currently playing.
•• Picture Mode
Customizes the screen settings for the content currently playing
-- The displayed image may differ depending on the model.
-- This feature is not available when content is playing through Video Wall.
-- Shops & Shopping Centres / Offices & Schools / Terminals & Stations / Video Wall / Calibration / BD Wise
•• Sound Mode
Customizes the audio settings for the content currently playing
-- Standard / Music / Movie / Clear Voice / Amplify
•• Repeat
Set the repeat mode.
-- One / All
41
File Formats Compatible with Player
•• Supported file systems include FAT32, EXFAT and NTFS.
•• A file with a vertical and horizontal resolution larger than the maximum resolution cannot be
played.
Check the vertical and horizontal resolution of the file.
•• Check the supported video and audio Codec types and Versions.
•• Check the supported file versions.
-- Flash player 11.0 and older and Flash Air 3.0 and older versions are supported.
-- PowerPoint version up to 97 – 2007 is supported
•• Only the last USB device that was connected is recognized.
Network Schedule Multiframe
Template files and LFD(.lfd) files
Restrictions
•• Ensure a distributed folder (content / schedules) exists in Internal / USB memory.
Playback restrictions
•• A maximum of two video (Video) files can be played.
•• More than one Flash file cannot be played.
•• For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.
•• Multiple videos (Video) cannot be played on a single display of a video wall simultaneously.
Sound output restrictions
•• More than one sound output cannot be used.
Playback restrictions
•• A maximum of two video files (Video) can be played simultaneously.
•• Playback priority: Flash file > network BGM > local BGM > video file in the main frame selected
by the user
•• In portrait playback mode, only one video file can be played at a time.
•• More than one Flash file cannot be played.
•• For Office files (PPT and Word files) and PDF files, only one file type is supported at a time.
•• LFD(.lfd) files are not supported.
Sound output restrictions
•• More than one sound output cannot be used.
•• Playback priority: Flash file > network BGM > local BGM > video file in the main frame selected
by the user
――Network BGM: Settings can be configured in step 1 when creating a server schedule.
――Local BGM: BGM settings can be configured using the tools displayed after the TOOLS button
is pressed during Player playback.
――User-selected main frame: Main frame settings can be configured in step 2 when creating a
server schedule.
42
Contents
File Extension
Container
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
MP4
*.mp4
3GP
*.mov
VRO
*.3gp
VOB
*.vro
PS
*.mpg
TS
Video Codec
DivX 3.11 / DivX 4 / DivX 5 /
DivX 6
Resolution
1920 x 1080
Frame rate
(fps)
6~30
Bit rate
(Mbps)
30
Audio Codec
AC3
LPCM
AAC
MPEG4 SP / ASP
HE-AAC
WMA
H.264 BP / MP / HP
DD+
MPEG(MP3)
DTS Core
Motion JPEG
G.711(ALaw,μ-Law)
*.mpeg
*.ts
Window Media Video v9
*.tp
*.trp
MPEG2
*.flv
*.vob
*.svi
MPEG1
*.m2ts
*.mts
VP6
640 x 480
4
*.divx
43
Video
•• 3D video is not supported.
•• Content with a resolution larger than the
resolution specified in the table above is not
supported.
•• Video content with a Bit rate or Frame rate larger
than the rate specified in the table above can
cause choppy video during playback.
•• Video content will not play, or not play correctly,
if there is an error in the content or the container.
•• Some USB/digital camera devices may not be
compatible with the player.
Audio
Image
•• Audio content with a Bit rate or Frame rate
larger than the rate specified in the table above
can cause choppy audio during playback.
•• Compatible image file format : JPEG, PNG, BMP
――32-bit, 24-bit and 8-bit BMP files are
•• Video content will not play, or not play
correctly, if there is an error in the content or
the container.
•• Supported maximum resolution : 4096 x 4096
•• Some USB/digital camera devices may not be
compatible with the player.
•• Supported image effects : 9 effects
(Fade1, Fade2, Blind, Spiral, Checker, Linear,
Stairs, Wipe, Random)
•• Supports up to WMA 10 Pro 5.1 channel. WMA
lossless audio is not supported.
supported.
•• Supported maximum file size: 20MB
•• QCELP, AMR NB/WB are not supported.
•• Supports up to H.264, Level 4.1
•• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and
AVCHD are not supported.
•• For all Video codecs except MVC, VP8, VP6:
-- Below 1280 x 720: 60 frame max
-- Above 1280 x 720: 30 frame max
•• GMC 2 or higher is not supported.
•• Supports only BD MVC Spec.
•• Only one video file can play at a time if video files
on the monitor use incompatible codecs or the
resolution is 1080 x 1920.
•• When a single video file is playing, Seamless
mode is not supported under the following
conditions:
-- Incompatible codec (MVC, VP3, MJPEG) ↔
Incompatible codec
-- Incompatible codec ↔ Compatible codec
-- The resolution is different from that of the
monitor
-- The frequency is different from that of the
monitor
44
Flash
Power Point
•• Flash player 11.0 and older and Flash Air 3.0 and
older versions are supported.
•• Flash Animation
-- Compatible file format : SWF
•• Recommended resolution : 960 x 540
-- Caution
Performance comparable to Flash Player
on a Windows operating system cannot be
guaranteed
Optimization is needed during content
creation
•• Flash Video
-- Compatible file format : FLV
-- Video
Codec : H.264 BP
Resolution : 1920 x 1080
-- Audio
Codec : H.264 BP
-- Caution
F4V file format is not supported
Screen Video is not supported
•• Compatible document file formats
-- Extension : ppt, pptx
-- Version : Office 97 ~ Office 2007
•• Functions not supported
-- Animation effect
-- 3D shapes (which will be displayed in 2D)
-- Header and footer (some subitems are not
supported)
-- Word Art
-- Align
A group alignment error may occur
PDF
•• Compatible document file formats
-- Extension : pdf
•• Functions not supported
-- Content less than 1 pixel not supported
because of performance degradation issue.
-- Masked Image, Tiled Image content not
supported.
-- Content with Rotated Text, not supported.
-- 3D Shadow Effects not supported.
-- Some characters not supported
(Special characters may be corrupted)
-- Office 2007
SmartArt is not fully supported. 97 out of
115 subitems are supported.
------
Object insertion
Half-width characters
Letter spacing
Charts
Vertical text
some subitems are not supported
-- Slide notes and handout
45
WORD
•• Compatible document file formats
-- Extension : .doc, .docx
-- Version : Office 97 ~ Office 2007
•• Functions not supported
-- Page background effect
-- Some paragraph styles
-- Word Art
-- Align
A group alignment error may occur
-- 3D shapes (which will be displayed in 2D)
-- Office 2007
SmartArt is not fully supported. 97 out of 115 subitems are supported.
-----
Charts
Half-width characters
Letter spacing
Vertical text
some subitems are not supported
-- Slide notes and handout
46
Clone Product
HOME
→ Clone Product → ENTER E
Clone Product
Export settings on the product to an external storage device. You can also import settings from an external storage device.
This option is useful when assigning the same settings to several products.
When a duplicate file is not found on the external storage device
1
Connect the external storage device, then run the Clone Product function.
2
The No cloning file found on the external storage device. Export this device's settings to the external storage
device? message appears.
-- The displayed image may differ depending on the model.
When a duplicate file is found on the external storage device
1
Connect the external storage device, then run the Clone Product function.
2
The Settings file found on the external storage device. Please select an option. message appears.
Run the Import from External Storage or Export to External Storage function.
-- Import from External Storage: Copy settings saved on an external storage device to the product.
-- Export to External Storage: Copy settings on the product to an external storage device.
――After configuration is complete, the product is rebooted automatically.
47
ID Settings
HOME
→ ID Settings → ENTER E
ID Settings
Assign an ID to a set.
Device ID
Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
――Press u/d to select a number, and press E.
――Enter the number you want using the number buttons on the remote control.
PC Connection Cable
-- The displayed image may differ depending on the model.
Select a method to connect to MDC to receive the MDC signal.
•• RS232C cable
Communicate with MDC via the RS232C-stereo cable.
•• RJ-45 (LAN)/Wi-Fi Network
Communicate with MDC via the RJ45 cable.
48
Connectivity
Network Settings
Connect to a wireless network and use the product as a TV+signage using MagicInfo Express Content Creator on your PC.
HOME
→ Connectivity → ENTER E
Network type
•• Wireless / Wired
Connectivity
Wi-Fi Direct
-- The displayed image may differ depending on the model.
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your
product directly without a router.
――To use this function, your mobile device should be supported by the Wi-Fi Direct.
49
Network Status
HOME
Check the current network and Internet connection.
→ Network Status → ENTER E
Network Status
-- The displayed image may differ depending on the model.
50
Picture Mode
HOME
→ Picture Mode → ENTER E
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Videos/Images mode improves the picture quality of the video device. Text mode improves the picture quality of the
computer.
•• Shops & Shopping Centres
Suitable for shopping malls.
-- Select either Videos/Images or Text depending on the picture mode.
Picture Mode
•• Offices & Schools
Suitable for offices and schools.
-- Select either Videos/Images or Text depending on the picture mode.
-- The displayed image may differ depending on the model.
•• Terminals & Stations
Suitable for bus terminals and train stations.
-- Select either Videos/Images or Text depending on the picture mode.
•• Video Wall
Suitable for environments where videowall display are used.
-- Select either Videos/Images or Text depending on the picture mode.
•• Calibration
In this mode, the brightness, colour, gamma and uniformity settings customized using the colour calibration programme
Advanced Color Management are applied.
-- To apply the Calibration mode properly, make sure you configure the picture quality settings, such as brightness,
colour, gamma and uniformity, using the colour calibration programme Advanced Color Management.
-- To download the Advanced Color Management programme, visit www.samsung.com/displaysolutions.
•• BD Wise
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise.
When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.
-- Available when you connect Samsung products that support BD Wise through an HDMI cable to the product.
-- The BD Wise function is enabled only when a source device with the BD Wise function is connected.
51
On/Off Timer
HOME
→ On/Off Timer → ENTER E
――You must set Clock Set before you can use this feature.
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
The power is turned on with the specified volume or input source.
On/Off Timer
On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time first.
(On Timer 1 ~ On Timer 7)
-- The displayed image may differ depending on the model.
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want On Timer to turn on your product.
-- The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left
and right arrow buttons to change entry fields.
•• Volume: Set the desired volume level. Use the left and right arrow buttons to change the volume level.
•• Source: Select the input source of your choice.
•• Aerial (when the Source is set to TV): Select Terrestrial or Cable.
•• Channel (when the Source is set to TV): Select the desired channel.
•• Content (when the Source is set to Internal/USB): From the USB device or internal memory device, select a folder
containing content you want to play when the product turns on. Content can include music, photo or video files.
――This function is available only when a USB device is connected.
――If there is no music file on the USB device or you don’t select a folder containing a music file, the Timer function does not
operate correctly.
――If there is only one photo file in the USB, the Slide Show will not play.
――If a folder name is too long, the folder cannot be selected.
――Each USB you use is assigned its own folder. When using more than one of the same type of USB, make sure the folders
assigned to each USB have different names.
――We recommend that you use a USB memory stick and a multi card reader when using On Timer.
――The On Timer function may not work with USB devices with a built-in battery, MP3 players, or PMPs made by some
manufacturers because the product can take too long to recognize these devices.
52
Off Timer
Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off Timer 7)
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want Off Timer to turn off your product.
-- The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left
and right arrow buttons to change entry fields.
Holiday Management
Timer will be disabled during a period specified as a holiday.
•• Add Holiday: Specify the period you want to add as a holiday.
Select the start and end dates of the holiday you want to add using the u/d buttons, and click the Save button.
The period will be added to the list of holidays.
-- Start: Set the start date of the holiday.
-- End: Set the end date of the holiday.
――Delete: Delete selected items from the list of holidays.
――Edit: Select a holiday item and then change the date.
•• Set Applied Timer: Set the On Timer and Off Timer to not activate on public holidays.
-- Press E to select the On Timer and Off Timer settings you do not want to activate.
-- The selected On Timer and Off Timer will not activate.
53
Ticker
HOME
→ Ticker → ENTER E
Input text while a video or image is displayed and display the text on the screen.
•• Off / On
•• Message: Enter a message to display on the screen.
•• Time: Set the Start Time and End Time to display a Message.
•• Font options: Specify the text font and colour for the message.
Ticker
•• Position: Select an orientation to display a Message.
•• Scroll: Specify the scroll Direction and Speed for the message.
•• Preview: Preview configured caption settings.
-- The displayed image may differ depending on the model.
More settings
HOME
Set a variety of features.
→ More settings → ENTER E
More settings
-- The displayed image may differ depending on the model.
54
Chapter 05
Screen Adjustment
Configure the Picture settings (Backlight, Colour Tone, etc.).
The layout of the Picture menu options may vary depending on the product.
Picture Mode
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Videos/Images mode improves the picture quality of the video device. Text mode improves the picture quality of the
computer.
MENU m → Picture → Picture Mode → ENTER E
•• Shops & Shopping Centres
Suitable for shopping malls.
-- Select either Videos/Images or Text depending on the picture mode.
Picture
Picture Mode
Shops & Shopping Centres
· Backlight
80
· Contrast
100
· Brightness
45
· Sharpness
60
· Colour
55
· Tint (G/R)
G50
-- The displayed image may differ depending on the model.
R50
•• Offices & Schools
Suitable for offices and schools.
-- Select either Videos/Images or Text depending on the picture mode.
•• Terminals & Stations
Suitable for bus terminals and train stations.
-- Select either Videos/Images or Text depending on the picture mode.
•• Video Wall
Suitable for environments where videowall display are used.
-- Select either Videos/Images or Text depending on the picture mode.
•• Calibration
In this mode, the brightness, colour, gamma and uniformity settings customized using the colour calibration programme
Advanced Color Management are applied.
-- To apply the Calibration mode properly, make sure you configure the picture quality settings, such as brightness,
colour, gamma and uniformity, using the colour calibration programme Advanced Color Management.
-- To download the Advanced Color Management programme, visit www.samsung.com/displaysolutions.
•• BD Wise
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise.
When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.
-- Available when you connect Samsung products that support BD Wise through an HDMI cable to the product.
-- The BD Wise function is enabled only when a source device with the BD Wise function is connected.
55
Backlight / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
MENU m → Picture → ENTER E
Picture
Picture Mode
Shops & Shopping Centres
· Backlight
80
· Contrast
100
· Brightness
45
· Sharpness
60
· Colour
55
· Tint (G/R)
G50
Your product has several options for adjusting picture quality.
Picture Mode
Shops & Shopping Centres,
Offices & Schools, Terminals &
Stations, Video Wall
Picture Mode settings
Adjustable options
Videos/Images
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
Text
Backlight / Contrast / Brightness / Sharpness
Calibration
Backlight
BD Wise
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint (G/R)
――When you make changes to Backlight, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted
accordingly.
――You can adjust and store settings for each external device you have connected to an input on the product.
――Lowering picture brightness reduces power consumption.
R50
-- The displayed image may differ depending on the model.
56
Colour Temperature
Adjust the colour temperature (Red / Green / Blue). (Range: 2800K–16000K)
――Enabled when Colour Tone is set to Off.
MENU m → Picture → Colour Temperature → ENTER E
――Colour Temperature is disabled if Picture Mode is set to Calibration or BD Wise.
Picture
Colour Temperature
16000K
-- The displayed image may differ depending on the model.
57
White Balance
2 Point
Adjust the colour temperature for a more natural picture.
MENU m → Picture → White Balance → ENTER E
Picture
White Balance
•• R-Offset / G-Offset / B-Offset: Adjust each colour’s (red, green, blue) darkness.
•• R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
•• Reset: Suitable for environments where videowall display are used.
10 Point
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
•• 10 Point (Off / On)
――Level, Red, Green, Blue and Reset are enabled only when 10 Point is set to On.
•• Level: Select interval to adjust.
-- The displayed image may differ depending on the model.
•• Red: Adjust the red level.
•• Green: Adjust the green level.
•• Blue: Adjust the blue level.
•• Reset: Suitable for environments where videowall display are used.
――Some external devices may not support this function.
――Enabled when Picture Mode is set to Offices & Schools (Videos/Images).
58
Gamma
Adjust the primary colour intensity.
――If Picture Mode is set to Calibration, Gamma is disabled.
MENU m → Picture → Gamma → ENTER E
Picture
Gamma
0
-- The displayed image may differ depending on the model.
Calibrated value
Select whether to apply the brightness, colour, gamma and uniformity settings customized using the colour calibration
programme Advanced Color Management to the Information and Advertisement modes.
MENU m → Picture → Calibrated value → ENTER E
•• Don't apply / Apply
――To download the Advanced Color Management programme, visit www.samsung.com/displaysolutions.
――If Picture Mode is set to Calibration, Calibrated value is disabled.
Picture
Calibrated value
Don't apply
-- The displayed image may differ depending on the model.
59
Advanced Settings
Picture Mode
MENU m → Picture → Advanced Settings → ENTER E
Advanced Settings
Dynamic Contrast
Terminals & Stations
Adjustable options
Videos/Images
Dynamic Contrast / Black Tone / Flesh Tone /
RGB Only Mode / Colour Space
Text
Dynamic Contrast / Black Tone
Videos/Images
Dynamic Contrast / Black Tone / Flesh Tone
/ RGB Only Mode / Colour Space / Motion
Lighting
Text
Dynamic Contrast / Black Tone
High
Black Tone
Darkest
Flesh Tone
0
RGB Only Mode
Colour Space
Shops & Shopping Centres,
Offices & Schools, Video Wall
Picture Mode settings
BD Wise
Off
Native
Motion Lighting
Dynamic Contrast / Black Tone / Flesh Tone / RGB
Only Mode / Colour Space
――If Picture Mode is set to Calibration, Advanced Settings is disabled.
Off
-- The displayed image may differ depending on the model.
60
Dynamic Contrast
Advanced Settings
Dynamic Contrast
High
Black Tone
Darkest
Flesh Tone
0
RGB Only Mode
Colour Space
Off
Native
Motion Lighting
Off
Adjust the screen contrast.
•• Off / Low / Medium / High
Black Tone
Select the black level to adjust the screen depth.
•• Off / Dark / Darker / Darkest
Flesh Tone
Emphasize pink Flesh Tone.
RGB Only Mode
-- The displayed image may differ depending on the model.
Displays the Red, Green and Blue colour for making fine adjustments to the hue and saturation.
•• Off / Red / Green / Blue
Colour Space
Adjusts the range and variety of colours (the colour space) available to create images.
•• Auto / Native / Custom
――To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom.
Motion Lighting
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
•• Off / On
61
Picture Options
Picture Mode
MENU m → Picture → Picture Options → ENTER E
Shops & Shopping Centres,
Offices & Schools, Terminals &
Stations, Video Wall
Picture Options
Picture Mode settings
Adjustable options
Videos/Images
Colour Tone / Digital Clean View / MPEG
Noise Filter / HDMI Black Level / Film Mode /
Dynamic Backlight
Text
Colour Tone / HDMI Black Level / Dynamic
Backlight
Colour Tone
Off
Calibration
HDMI Black Level / Dynamic Backlight
Digital Clean View
Off
BD Wise
MPEG Noise Filter
Off
Colour Tone / Digital Clean View / MPEG Noise
Filter / HDMI Black Level / Film Mode / Dynamic
Backlight
HDMI Black Level
Low
Film Mode
Off
Dynamic Backlight
Off
-- The displayed image may differ depending on the model.
62
Colour Tone
Picture Options
If Picture Mode is set to Text
Colour Tone
Off
Digital Clean View
Off
If Picture Mode is set to Videos/Images or BD Wise
MPEG Noise Filter
Off
•• Off / Cool / Standard / Warm1 / Warm2
――If Picture Mode is set to Calibration, Colour Tone is disabled.
HDMI Black Level
Low
Film Mode
Off
Dynamic Backlight
Off
-- The displayed image may differ depending on the model.
•• Off / Cool / Standard / Warm
――Settings can be adjusted and stored for each external device connected to an input on the product.
Digital Clean View
If the broadcast signal received by your product is weak, you can activate the Digital Clean View feature to reduce any static
and ghosting that may appear on the screen.
•• Off / Low / Medium / High / Auto / Auto Visualisation
――Auto Visualisation: When changing analogue channels, displays signal strength.
――Received signal intensity is the strongest when the bar is green.
――When the signal is weak, try all the options until the the product displays the best picture.
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
•• Off / Low / Medium / High / Auto
63
HDMI Black Level
Picture Options
Colour Tone
Off
Digital Clean View
Off
MPEG Noise Filter
Off
HDMI Black Level
Low
Selects the black level on the screen to adjust the screen depth.
•• Auto / Low / Normal
――Available only in HDMI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p).
Film Mode
This mode is suitable to view movies.
Film Mode
Off
Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Dynamic Backlight
Off
•• Off / Auto1 / Auto2
――Available in TV, AV, HDMI (1080i).
-- The displayed image may differ depending on the model.
Dynamic Backlight
Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.
•• Off / On
64
Picture Size
Choose size and aspect ratio picture displayed on screen.
Picture Size
MENU m → Picture → Picture Size → ENTER E
――Different screen adjustment options are displayed depending on the current input source.
•• Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratios.
Picture Size
Picture Size
•• 16:9: Sets the picture to 16:9 wide mode.
16:9
•• Zoom2: Use for a stronger magnification.
Position
•• Smart View 1: Reduces the 16:9 picture by 50%.
4:3 Screen Size
Resolution
-- The displayed image may differ depending on the model.
•• Zoom1: Use for moderate magnification. Cuts off the top and sides.
•• Smart View 2: Reduces the 16:9 picture by 25%.
Off
•• Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
•• 4:3: Sets the picture to basic (4:3) mode.
――Do not set your product to 4:3 format for a long time.
The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn)
which is not covered by the warranty.
•• Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) signals are inputted.
•• Custom: Changes the resolution to suit the user's preferences.
•• Original ratio: If the input source is PC, HDMI (PC connection), the video will display in the original aspect ratio.
65
Position
Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit or Custom.
――To use the Position function after selecting Zoom1, Zoom2, Wide Fit, Screen Fit or Custom, follow these steps.
Picture Size
Picture Size
Custom
Position
1
Press the d button to select Position. Press the E button.
2
Press the u or d button to move the picture up or down.
3
Press the E button.
4:3 Screen Size
Resolution
Off
-- The displayed image may differ depending on the model.
Zoom/Position
Adjusts the picture zoom and position. This option is available when the input source is set to HDMI (1080i/1080p), AV.
Picture Size must be set to Custom for the option to be available.
Picture Size
Picture Size
Custom
Zoom/Position
4:3 Screen Size
Resolution
Off
1
Press the d button to select Zoom/Position. Press the E button.
2
Select the Zoom or Position. Press the E button.
3
Press the u/d/l/r button to move the picture.
4
Press the E button.
――If you want to reset the picture to its original position, select Reset in the Zoom/Position screen.
――The picture will be set to its default position.
-- The displayed image may differ depending on the model.
66
4:3 Screen Size
Available only when picture size is set to Auto Wide. You can determine the desired picture size at the 4:3 WSS (Wide Screen
Service) size or the original size. Each European country requires different picture size.
Picture Size
Picture Size
Custom
Zoom/Position
4:3 Screen Size
Resolution
Off
-- The displayed image may differ depending on the model.
Resolution
If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture
quality by selecting the same resolution for the product as the PC using this menu.
Available resolutions: Off / 1024x768 / 1280x768 / 1360x768 / 1366x768
Picture Size
Picture Size
Custom
Zoom/Position
4:3 Screen Size
Resolution
Off
-- The displayed image may differ depending on the model.
67
Auto Adjustment
Adjust frequency values/positions and fine tune the settings automatically.
MENU m → Picture → Auto Adjustment → ENTER E
Picture
Auto Adjustment
-- Available in PC mode only.
-- The displayed image may differ depending on the model.
PC Screen Adjustment
MENU m → Picture → PC Screen Adjustment → ENTER E
Picture
•• Coarse / Fine
Removes or reduces picture noise.
If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the centre
of screen.
•• Position
To adjust the PC’s screen position if it is not centred or does not fit the product screen.
Press the ▲ or ▼ button to adjust the Vertical Position. Press the ◄ or ► button to adjust the Horizontal Position.
PC Screen Adjustment
•• Image Reset
Resets the image to the default settings.
-- Available in PC mode only.
-- The displayed image may differ depending on the model.
68
Picture Off
Selecting Picture Off switches off the screen. The volume is not disabled.
To switch the screen on, press any button other than the volume button.
MENU m → Picture → Picture Off → ENTER E
Picture
Picture Off
-- The displayed image may differ depending on the model.
Reset Picture
Resets your current picture mode to its default settings.
MENU m → Picture → Reset Picture → ENTER E
Picture
Reset Picture
-- The displayed image may differ depending on the model.
69
Chapter 06
OnScreen Display
PIP
PIP Settings
MENU m → OnScreen Display → PIP → ENTER E
Main picture
OnScreen Display
PIP
Display Orientation
Screen Protection
Message Display
Menu Language
The picture from the external video source will be in the main screen and the picture from the product will be in the PIP subpicture screen.
English
Sub picture
PC
AV / TV / HDMI
AV
PC / HDMI
TV
PC / HDMI
HDMI
AV / TV / PC
――If Source Content Orientation is set to Portrait, PIP is disabled.
Reset OnScreen Display
-- The displayed image may differ depending on the model.
-- For PIP sound, refer to the Sound Select instructions.
-- If you turn the product off while watching in the PIP mode, PIP mode will remain after power
Off/On.
-- You may notice that the picture in the PIP screen becomes slightly unnatural when you use
the main screen to view a game or karaoke.
70
•• PIP (Off / On): Activate or deactivate the PIP function.
PIP
•• Source: You can select a source of the sub picture.
PIP
On
Source
TV
•• Aerial (Terrestrial / Cable): Select either Terrestrial or Cable as the input source for the sub-screen.
――This option is enabled if the secondary display is set to TV.
Channel
Air 4
•• Channel: Select the channel for the sub-screen.
――This option is enabled if the secondary display is set to TV.
Size
Õ
•• Size (
Position
Ã
•• Position (
,
,
,
,
): Select a position for the sub-picture.
――In double (
,
,
,
) mode, you cannot select Position.
Aerial
Terrestrial
Sound Select
Main
Close
,
,
,
,
,
,
): Select a size for the subpicture.
•• Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the Sub picture.
-- The displayed image may differ depending on the model.
71
Display Orientation
Onscreen Menu Orientation
Set the menu screen orientation.
MENU m → OnScreen Display → Display Orientation → ENTER E
•• Landscape: Display the menu in landscape mode (default).
•• Portrait: Display the menu in portrait mode on the right side of the product screen.
Display Orientation
Onscreen Menu Orientation
Landscape
Source Content Orientation
Landscape
Aspect Ratio
Full Screen
-- The displayed image may differ depending on the model.
Source Content Orientation
Set the orientation of content from external devices connected to the product.
•• Landscape: Display the screen in landscape mode (default).
•• Portrait: Display the screen in portrait mode.
――If PIP is set to On, Source Content Orientation is disabled.
Aspect Ratio
Set the rotated screen to be either full screen or original.
•• Full Screen: Display the rotated screen in full screen.
•• Original: Display the rotated screen in the original aspect ratio.
――Available only when Source Content Orientation is set to Portrait.
――If PIP is set to On, Aspect Ratio is disabled.
72
Screen Protection
Auto Protection Time
MENU m → OnScreen Display → Screen Protection → ENTER E
Screen Protection
Auto Protection Time
Screen Burn Protection
If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the
formation of burnt in ghost images on the screen.
•• Off / 2 hours / 4 hours / 8 hours / 10 hours
Screen Burn Protection
Off
To reduce the possibility of screen burn, this unit is equipped with Screen Burn Protection screen burn prevention
technology.
Screen Burn Protection moves the picture slightly on the screen.
The Screen Burn Protection Time setting allows you to programme the time between movements of the picture in minutes.
-- The displayed image may differ depending on the model.
Pixel Shift
Minimize image retention by finely moving pixels horizontally or vertically.
•• Pixel Shift (Off / On)
――Horizontal, Vertical and Time are enabled only when Pixel Shift is set to On.
•• Horizontal: Sets how many pixels the screen moves horizontally.
•• Vertical: Sets how many pixels the screen moves vertically.
•• Time: Set the time interval for performing the horizontal or vertical movement, respectively.
Available Pixel Shift Settings and Optimum Settings.
Available Settings
Optimum Settings
Horizontal (pixels)
0~4
4
Vertical (pixels)
0~4
4
Time (minute)
1 min ~ 4 min
4 min
――The Pixel Shift value may differ depending on the product size (inches) and mode.
――Displaying a still image or a 4:3 output for an extended period of time may cause image retention. This is not a defect in the
product.
――If Picture Size is set to Screen Fit, Pixel Shift is disabled.
73
Timer
Screen Burn Protection
You can set the timer for Screen Burn Protection.
Pixel Shift
The Screen Burn Protection feature stops automatically after a specified period of time.
Timer
Timer
Immediate display
Off
Side Grey
Off
-- The displayed image may differ depending on the model.
Off
Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period).
Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to End
Time).
――Mode, Period, Time, Start Time and End Time are enabled only when Timer is set to Repeat or Interval.
•• Mode: Select a screen protective pattern to display.
-- Pixel: Pixels on the screen alternate black continuously.
-- Rolling bar: A vertical bar moves left to right.
-- Fading screen: The entire screen becomes brighter, then darker.
――The Rolling bar and Fading screen patterns appear only once regardless of the specified repeat period or time.
•• Period: Specify the time interval to activate the Screen Burn Protection function.
――The option is enabled when Repeat is selected for Timer.
•• Time: Specify the duration to keep the Screen Burn Protection function on.
――Enabled when Timer is set to Repeat and Mode is set to Pixel.
•• Start Time: Set the start time to activate the screen protection function.
――The option is enabled when Interval is selected for Timer.
•• End Time: Set the end time to deactivate the screen protection function.
――The option is enabled when Interval is selected for Timer.
74
Immediate display
Screen Burn Protection
Select the screen saver you want to display immediately.
Pixel Shift
•• Off / Pixel / Rolling bar / Fading screen
Timer
Side Grey
Immediate display
Off
Side Grey
Off
When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen.
•• Off / Light / Dark
-- The displayed image may differ depending on the model.
75
Message Display
Source Info
Select whether to display the source OSD when the input source changes.
MENU m → OnScreen Display → Message Display → ENTER E
•• Off / On
No Signal Message
Message Display
Source Info
On
No Signal Message
On
MDC Message
On
Select whether to display the no-signal OSD when no signal is detected.
•• Off / On
MDC Message
Select whether to display the MDC OSD when the product is controlled by the MDC.
•• Off / On
-- The displayed image may differ depending on the model.
76
Menu Language
Set the menu language.
――A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions
on your PC.
MENU m → OnScreen Display → Menu Language → ENTER E
OnScreen Display
Menu Language
English
-- The displayed image may differ depending on the model.
Reset OnScreen Display
This option returns the current settings under OnScreen Display to the default factory settings.
MENU m → OnScreen Display → Reset OnScreen Display → ENTER E
OnScreen Display
Reset OnScreen Display
-- The displayed image may differ depending on the model.
77
Chapter 07
Sound Adjustment
Configure the sound (Sound) settings for the product.
Sound Mode
You can select a sound mode to suit your personal preferences.
•• Standard: Selects the normal sound mode.
•• Music: Emphasizes music over voices.
MENU m → Sound → Sound Mode → ENTER E
•• Movie: Provides the best sound for movies.
•• Clear Voice: Emphasizes voices over other sounds.
Sound
Sound Mode
Standard
•• Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.
――If Speaker Settings is set to External, Sound Mode is disabled.
Sound Effect
HDMI Sound
AV(HDMI)
Dolby Digital Comp
RF
Speaker Settings
Auto Volume
Off
Audio Format
PCM
-- The displayed image may differ depending on the model.
78
Sound Effect
Configure your preferred sound effect for output sound.
――If Speaker Settings is set to External, Sound Effect is disabled.
――Available only when Sound Mode is set to Standard.
MENU m → Sound → Sound Effect → ENTER E
Virtual Surround
Sound Effect
Virtual Surround
Off
Dialog Clarity
Off
Equaliser
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related
Transfer Function) technology.
•• Off / On
Dialog Clarity
This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be
heard more clearly.
-- The displayed image may differ depending on the model.
•• Off / On
Equaliser
Use Equaliser to customize sound setting for each speaker.
•• Balance L/R: Adjusts the balance between the right and left speaker.
•• 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
•• Reset: Resets the equalizer to its default settings.
79
HDMI Sound
Select whether to hear from AV(HDMI) or PC(DVI).
•• AV(HDMI) / PC(DVI)
MENU m → Sound → HDMI Sound → ENTER E
Sound
HDMI Sound
AV(HDMI)
-- The displayed image may differ depending on the model.
Dolby Digital Comp
Set Dolby Digital Compression mode.
•• Line / RF
MENU m → Sound → Dolby Digital Comp → ENTER E
Sound
Dolby Digital Comp
RF
-- The displayed image may differ depending on the model.
80
Speaker Settings
Sound Output
MENU m → Sound → Speaker Settings → ENTER E
If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused
by the difference in decoding speed between the products speakers and the speakers attached to your audio receiver. If this
occurs, set the product to External.
Sound
Speaker Settings
•• External / Internal / Receiver / TV SoundConnect
――When you set Speaker Settings to External, the products speakers are turned off.
You will hear sound through the external speakers only. When the Speaker Settings is set to Internal, both the product
speakers and the external speakers are on. You will hear sound through both.
――If there is no video signal, both the products speakers and the external speakers will be mute.
TV SoundConnect
-- The displayed image may differ depending on the model.
You can connect Samsung Bluetooth audio devices to the SMART Signage TV. They must be paired using the SMART
Signage TV's Bluetooth function. For more information on pairing, refer to the Samsung Bluetooth audio device's operating
manual.
Samsung Audio Device List
Displays a list of paired Samsung audio devices. Select a device to display its menu options. You can activate/deactivate the
audio device or remove it from the list.
Add New Device
Adds a new device to the list of paired devices. If Add New Device is set to Off, the connection signals from new devices are
ignored.
•• On / Off
――Bluetooth is a short-distance wireless communication protocol allowing information exchange between connected mobile
phones, laptops, earphones and headphones with Bluetooth compatible devices.
――TV SoundConnect and Bluetooth headphones can't be used simultaneously.
81
Auto Volume
The volume can vary depending on the channel.
Automatically equalize the volume level when switching to another channel.
•• Off / Normal / Night
MENU m → Sound → Auto Volume → ENTER E
Normal equalizes the volume level on each channel, so that when you change channels, the volume level is the same.
Night equalizes and decrease the volume level on each channel, so each channel is quieter. Night is useful at night, when you
may want to keep the volume low.
――To use the volume control of a connected source device, set Auto Volume to Off. A change to the volume control of the
Sound
Auto Volume
Off
connected source device may not be applied if Auto Volume is set to Normal or Night.
――If Speaker Settings is set to External, Auto Volume is disabled.
-- The displayed image may differ depending on the model.
Audio Format
Selects the digital audio output (S/PDIF) format. The available formats are dependent on the input source.
•• PCM / Dolby Digital / DTS Neo 2:5
MENU m → Sound → Audio Format → ENTER E
Sound
Audio Format
PCM
-- The displayed image may differ depending on the model.
82
Reset Sound
The displayed image may differ depending on the model. Reset all sound settings to the factory defaults.
MENU m → Sound → Reset Sound → ENTER E
Sound
Reset Sound
-- The displayed image may differ depending on the model.
83
Chapter 08
Broadcasting
Configure the Broadcasting settings for the product.
Available in TV mode only.
Auto Tuning
The Auto Tuning function memorizes all channels that are available over the aerial or through your cable system and adds
them to the Channel List.
To start Auto Tuning, follow these steps:
MENU m → Broadcasting → Auto Tuning → ENTER E
Broadcasting
To start Auto Tuning, follow these steps:
1
Auto Tuning
Aerial
Auto Tuning
screen appears.
Terrestrial
Channel List
2
automatically start memorizing channels.
――Cable: If your product is connected to a cable outlet, choose Cable, and then press ENTER E. Go to Step 3.
Schedule Manager
Edit Favourites
On the Auto Tuning screen, select the source of your product signal.
――Terrestrial: If your product is connected to an antenna choose Terrestrial, and then press ENTER E. The product will
Guide
Edit Channel
Push MENU m → Broadcasting → Auto Tuning → Auto Tuning → ENTER E on your remote. The Auto Tuning
――Select Digital & Analogue, Digital or Analogue to scan for channels.
3
Sets Search Mode using
/
buttons. When done, select Scan, and then press ENTER E. The product will start
memorizing channels.
――Channel memorization can take up to 45 minutes, depending on your cable system.
――Memorized channels are added to the Added Ch. list. These are the channels you will see when you use the channel
-- The displayed image may differ depending on the model.
buttons on your remote.
-- Available in TV mode only.
84
Cancelling Auto Tuning
Cable Search Option
MENU m → Broadcasting → Auto Tuning → Cable Search Option →
ENTER E
1
Press the Stop button.
2
A Stop Auto Tuning? message appears.
3
Press the Yes button.
(when the aerial was set to Cable)
Sets additional search options such as the frequency and symbol rate for a cable network search.
――Availability depends on the specific model and area.
Auto Tuning
Cable Search Option
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
85
Aerial
Before your television can begin memorizing the available channels, you must specify the type of signal source that is
connected to the LED display.
•• Terrestrial / Cable
MENU m → Broadcasting → Aerial → ENTER E
Broadcasting
Aerial
Terrestrial
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
86
Channel List
MENU m → Broadcasting → Channel List → ENTER E
Broadcasting
Register or delete channels. Add favourite channels or rename analogue channels.
Select a desired channel from Channel List to view the channel instantly.
――To navigate Channel List faster, press the channel buttons. The channel list changes page by page.
Added Ch.
Shows all added channels.
Channel List
Favourites 1 ~ Favourites 5
Shows all favourite channels, in up to five groups. Each group has a separate screen.
――The TV displays favourite groups only if you have added favourites using Edit Favourites.
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
Options
•• Aerial
Select either Terrestrial or Cable as digital channel mode.
•• Category
Channels saved on your TV are classified under the All and Added Ch. categories. Select a desired category.
•• Sorting
Sort the list by Channel Number or by Name (Digital channels only).
•• Edit Favourites
Edit favourite channel lists from Edit Channel.
Icons found in the channel list page
••
••
A : Analogue channel
*: A channel that is selected
87
Guide
The Guide provides an overview of each digital channel's programme lineup. You can check the programme schedules and set
up a Schedule Manager.
――The information in the Guide is for digital channels only. Analogue channels are not supported.
MENU m → Broadcasting → Guide → ENTER E
You can press the colour keys on the remote to access optional functions.
Broadcasting
Guide
Quick Navigation
Search channel information quickly.
Schedule Manager
Access the Schedule Manager function.
You can view information on the Schedule Manager.
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
88
Schedule Manager
MENU m → Broadcasting → Schedule Manager → ENTER E
Broadcasting
Watch a desired channel at a scheduled time.
•• Aerial: Select either Terrestrial or Cable as digital channel mode.
•• Channel: Select the desired channel.
•• Repeat: Once / Manual / Sat~Sun / Mon~Fri / Everyday
――Select Manual if you want to configure settings by day of the week.
•• Date: Select the desired date.
•• Start Time: Set the time to watch the desired channel.
Schedule Manager
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
89
Edit Channel
Manage channels saved on your TV. Delete channels, re-register deleted channels or rename analogue channels.
Icons found in the edit channel page
MENU m → Broadcasting → Edit Channel → ENTER E
Broadcasting
••
••
A : Analogue channel
*: A channel that is selected
Deleting/registering channels
Edit Channel
Deleting channels
1
Select channels to delete from the screen. To cancel, select again. To select all channels, select Options from the screen
and then select Select All from the sub-menu items.
――Alternatively, press and hold the E button on the remote control for about three seconds to run Select All / Deselect
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
All.
2
After selecting channels, select Delete from the screen to delete the channels.
Re-registering deleted channels
Register deleted channels again, if required. Deleted channels are grayed out and can only be found in the list of all channels.
The register function is enabled for deleted channels only.
1
Select Options from the screen. Sub-menu items are displayed. Select Category from the sub-menu items and then
select All.
2
From the list of all channels, select deleted channels you want to register again. To cancel, select again. To select all
channels, select Options from the screen and then select Select All from the sub-menu items.
――Alternatively, press and hold the E button on the remote control for about three seconds to run Select All / Deselect
All.
3
After selecting channels, select Add from the screen to re-register the channels.
90
Editing registered channels
Select Options from the edit channel page. The following functions are provided in the page.
Provided functions may vary depending on the broadcast signal.
Option Name
Operations
Select All
Select all channels in the Edit Channel page.
Deselect All
Deselect all channels.
Aerial
Select either Terrestrial or Cable as digital channel mode.
Category
Channels saved on your TV are classified under the All and Added Ch. categories. Select a desired
category.
Edit Favourites
Set frequently viewed channels as favourite channels.
Rename channel
Change the names of analogue channels to suit your preferences. A channel name can be up to
five characters long.
Information
View information about the current broadcast programme on the aerial.
91
Edit Channel Number
MENU m → Broadcasting → Edit Channel Number → ENTER E
You can change the channel numbers. Set Edit Channel Number to Enable.
――This function is only available on certain models in specific geographical areas.
――When a channel number is changed, its channel information is not updated automatically.
Broadcasting
Edit Channel Number
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
92
Edit Favourites
MENU m → Broadcasting → Edit Favourites → ENTER E
Broadcasting
Creating a favourite channel list
Set frequently viewed channels as favourite channels. Favourite channels are indicated by a symbol in the Edit Channel or
Channel List page. A maximum of five favourite channel lists are allowed. Create different favourites channel lists for each
family member.
Adding the current channel to a favourite channel list
Add the channel you are currently watching to a favourite channel list.
Edit Favourites
1
Press the TOOLS button while watching TV. Sub-menu items are displayed. Select Edit Favourites from the sub-menu
items.
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
2
From the displayed prompt box, select a favourite channel list to save the current channel to. Select OK.
3
The current channel is added in the selected favourite channel list. Select OK.
Adding multiple channels to a favourite channel list
Add multiple channels to a favourite channel list, if required.
1
Select Edit Favourites from Channel List.
2
Select desired channels from the channel list in the centre of the screen.
3
Select Change Fav. from the screen to change the favourite channel list on the right to another desired favourite channel
list.
4
Select Add from the screen. The selected channels will create a favourite channel list.
93
Viewing channels saved under a favourite channel list
Deleting channels from a favourites channel list
――Favourite channel lists are only displayed if they have been created previously.
Delete channels from a favourite channel list, if required.
When changing the channel using the channel buttons, channels saved in favourite channel lists can
only be accessed.
1
1
Select Channel List from the Broadcasting menu. The channel list is displayed.
2
Select a favourite channel list among Favourites 1 – Favourites 5.
3
Select channels from the selected favourite channel list.
――Selecting Channel List while watching a favourites channel will display the updated favourites
channel list.
desired favourite channel list.
2
Select channels to delete from the selected favourite channel list.
3
Select Delete from the screen. The selected channels are deleted from the favourite channel list.
Changing the order of channels in a favourites channel list
Change the order of channels saved in a favourites channel list, if required.
Editing favourites channel lists
1
Operations
Copy to
favourites
Copy channels from a favourite channel list to another favourite channel list.
――This option is only available when channels under a favourite channel list
are selected.
Rename
Favourites
Change the name of a favourite channel list.
――This option is only available when channels under a favourite channel list
are selected.
Aerial
Select either the Terrestrial or Cable signal.
Edit Channel
Manage saved channels.
Information
View information about the current broadcast programme on the aerial.
Select Change Fav. from the screen to change the favourite channel list on the right to another
desired favourite channel list.
Select Options from the edit favourites channel list page. The following sub-menu items are displayed.
Option Name
Select Change Fav. from the screen to change the favourite channel list on the right to another
2
Select channels to rearrange from the selected favourite channel list.
3
Select Change order from the screen, and then change the order of the selected channels. To
apply the new order of the channels, press the E button.
94
Renaming a favourite channel list
Change the name of a favourite channel list, if required.
1
Select Change Fav. from the screen to change the favourites channel list on the right to another desired favourite channel list.
2
Select Options from the screen. Sub-menu items are displayed.
3
Select Rename Favourites from the sub-menu items. A prompt box appears.
4
Change the favourites channel list using the prompt box. The name for a favourite channel list can be up to 20 characters long.
Copying channels between favourites channel lists
Copy channels from a favourite channel list to another favourite channel list, if required.
1
Select Change Fav. from the screen to change the favourite channel list on the right to another desired favourite channel list.
2
Select channels to copy from the favourite channel list on the right.
3
Select Options from the screen. Sub-menu items are displayed.
4
Select Copy to favourites from the sub-menu items. A prompt box appears.
5
Select favourite channel lists to copy the channels to using the prompt box. The channels are saved to the selected favourite channel lists.
――To use Copy to favourites, make sure channels are saved in a favourite channel list.
95
Audio Options
Audio Language
(for digital broadcasts)
MENU m → Broadcasting → Audio Options → ENTER E
•• Primary Audio: Set the primary audio language.
Audio Options
Audio Language
Audio Format
Change the default value for audio languages.
English
Stereo
•• Secondary Audio: Set the secondary audio language.
――The available language may differ depending on the broadcast.
Audio Format
(for digital broadcasts)
Change a desired audio format. The supported audio format may vary depending on the broadcast programme.
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
96
Programme Rating Lock
The Programme Rating Lock blocks programmes with ratings higher than those desired. This is useful for controlling what
children watch on TV. This will not function for programmes originating from external sources, such as DVD players or USB files.
MENU m → Broadcasting → Programme Rating Lock → ENTER E
This PIN is required to watch a blocked programme.
――This option is available when the input source is TV.
――The default PIN number for a new product set is “0-0-0-0”.
Programme Rating Lock
――Availability depends on the specific model and area.
Programme Rating Lock
-- The displayed image may differ depending on the model.
-- Available in TV, AV mode only.
97
Channel Lock
MENU m → Broadcasting → Channel Lock → ENTER E
Broadcasting
Prevent your children from accessing harmful content by locking channels.
•• On / Off
――This option is available when the input source is TV.
――The default PIN number for a new product set is “0-0-0-0”.
――Availability depends on the specific model and area.
Channel Lock
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
98
Common Interface
CI Menu
Enables the user to select from the CAM-provided menu. Select the CI Menu based on the menu PC Card.
MENU m → Broadcasting → Common Interface → ENTER E
Broadcasting
Common Interface
CAM video transcoding
You can configure the setting to transcode the video codec from the CAM automatically. Turn it Off if you do not want to use it.
Application Info
View information about the CAM inserted into the CI slot and about the “CI or CI+ CARD” inserted into the CAM. You can install
the CAM any time, with or without the TV turned on.
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
1
Purchase a CI CAM module at your nearest dealer or by phone.
2
Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow.
3
Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the arrow so that it aligns
parallel with the slot.
4
Check if you can see a picture on a scrambled signal channel.
99
Channel Settings
Country (Area)
Select your country so that the TV can correctly auto-tune the broadcasting channels. This depends on the country or region.
MENU m → Broadcasting → Channel Settings → ENTER E
When the PIN input screen appears,enter your 4 digit PIN number.
•• Digital Channel: Change the country for digital channels.
Channel Settings
•• Analogue Channel: Change the country for analogue channels.
Country (Area)
Manual Tuning
Manual Tuning
Scans for a channel manually and stores in the TV.
Fine Tune
If a channel is locked using the Channel Lock function, the PIN input window appears.
This function depends on the country and region.
Transfer Channel List
When Aerial Source is set to Terrestrial or Cable
Delete CAM Operator Profile
Digital Text
Enable
Teletext Language
•• Digital Channel Tuning: Scans for a digital channel.
1
Select the New.
――When selecting Aerial → Terrestrial: Channel, Frequency, Bandwidth
――When selecting Aerial → Cable: Frequency, Modulation, Symbol Rate
2
-- The displayed image may differ depending on the model.
-- Available in TV mode only.
Select the Search. When scanning has finished, a channel is updated in the channel list.
•• Analogue Channel Tuning: Scans for an analogue channel.
1
Select the New.
2
Set the Programme, Colour System, Sound System, Channel and Search.
――Channel
C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the
assigned number for each aerial broadcasting station or cable channel.
3
Select the Store. When scanning has finished, a channel is updated in the channel list.
100
Fine Tune
(analogue channels only)
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, fine tune the channel manually. Scroll to the left or right until the image is clear.
――Settings are applied to the channel you’re currently watching.
――Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in
the channel banner.
――To reset the fine-tuning, select Reset.
Transfer Channel List
Imports or exports the channel map. When the PIN input screen appears, enter the PIN.
You should connect a USB storage device to use this function.
•• Import from USB: Import channel list from USB.
•• Export to USB: Export channel list to USB. This function is available when USB is connected.
Delete CAM Operator Profile
Select the CAM operator to delete.
――Availability depends on the specific model and area.
101
Digital Text
Enable or disable the MHEG function.
――The MHEG function is enabled only in countries where it is supported.
•• Disable / Enable
Teletext Language
Use this to set the teletext language.
――Availability depends on the specific model and area.
Primary Teletext
Set the primary teletext language.
Secondary Teletext
Set the secondary teletext language.
102
Chapter 09
Network
Network Status
Network Settings
MENU m → Network → Network Status → ENTER E
MENU m → Network → Network Settings → ENTER E
You can check the current network and Internet status.
Connect to a wireless network and use the product as a TV+signage using MagicInfo Express Content
Creator on your PC.
Network Status
Your wireless network and Internet connection are setup and ready to use.
Network Settings
Select your network type.
Network type
Wireless
Wireless network
You are connected to the Internet. If you have any problems using online services, please
contact your Internet service provider.
Disconnect
IP Settings
Retry
You can connect your
Device to the internet.
Please select which wireless
network to use.
Close
Refresh
WPS(PBC)
-- The displayed image may differ depending on the model.
-- The displayed image may differ depending on the model.
Network type
•• Wireless / Wired
103
Network Settings (Wired)
•• Depending on how your network is configured, you may be able to attach your product to your
LAN by connecting the LAN port on the back of your product directly to a network wall outlet
using a LAN cable.
See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in
your house.
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
•• You can attach your product to your LAN by connecting the LAN port on the back of your product
to an external modem using a LAN cable.
See the diagram below.
LAN
The LAN Port on the Wall
RJ45
LAN
External Modem
(ADSL / VDSL)
The Modem Port on the Wall
Modem Cable
RJ45
If you have a Dynamic Network, you should use an ADSL modem or router that supports the Dynamic
Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the
IP address, subnet mask, gateway, and DNS values your product needs to access the Internet so you do
not have to enter them manually. Most home networks are Dynamic Networks.
LAN Cable
•• You can attach your product to your LAN by connecting the LAN port on the back of your product
to an IP Sharer which is connected to an external modem. Use LAN cable for the connection. See
the diagram below.
LAN
The Modem Port on the Wall
External Modem
(ADSL / VDSL)
Modem Cable
IP Sharer
(having DHCP server)
LAN Cable
LAN Cable
RJ45
Some networks require a Static IP address. If your network requires a Static IP address, you must enter
the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen
when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values,
contact your Internet Service Provider (ISP).
If you have a Windows computer, you can also get these values through your computer.
――You can use ADSL modems that support DHCP if your network requires a Static IP address.
――ADSL modems that support DHCP also let you use Static IP addresses.
LAN Cable
104
Set the network connection to use Internet services such as perform software upgrades.
2
In the pop-up menu that appears, click Status.
Automatic Network Settings (Wired)
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
How to set up manually
1
Set Network type to Wired from the Network Settings page.
1
Set Network type to Wired from the Network Settings page.
2
Press the Connect button to start Network Settings.
2
Press the Connect button to start Network Settings.
-- The Connect button is only enabled when the LAN cable is properly connected.
3
The network test screen appears and verifies the network connection.
When the connection has been verified, the “Wired network and Internet connection
completed.” message appears.
――If the connection process fails, check the LAN port connection.
――If the automatic process cannot find the network connection values or if you want to set the
connection manually, go to the next section, network setup.
-- The Connect button is only enabled when the LAN cable is properly connected.
3
The network test screen appears and the verification process starts. Press Stop. The verification
process stops.
4
Select IP Settings on network connection screen. The IP Settings screen appears.
5
Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the entry
process for each field in the IP Address.
Manual Network Settings (Wired)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server
address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
――Setting IP Settings to Enter manually automatically changes DNS setting to Enter manually.
6
When done, select OK at the bottom of the page, and then press E. The network test screen
appears and the verification process starts.
7
When the connection has been verified, the “Wired network and Internet connection
completed.” message appears.
Right click the Network icon on the bottom right of the screen.
105
Network Setting (Wireless)
Connecting to a Wireless Network
Automatic Network Setup (Wireless)
Most wireless networks have an optional security system that requires devices that access the network
to transmit an encrypted security code called an Access or Security Key. The Security Key is based on
a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked
to enter when you set up security for your wireless network. If you use this method of setting up the
network connection, and have a Security Key for your wireless network, you will have to enter the Pass
Phrase during the the automatic or manual setup process.
How to set up automatically
1
Set Network type to Wireless from the Network Settings page.
2
The Network function searches for available wireless networks. When done, it displays a list of the
available networks.
Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video
may not play smoothly.
――Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the
3
twice.
wireless IP sharer is currently being used by another device nearby, this will result in interference and
communication failure.
――If the desired wireless router does not appear, select Refresh to search again.
――Your product supports only the following wireless network security protocols.
If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to
WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung products will not support
a connection in compliance with new Wi-Fi certification specifications.
――If the router cannot be found after retrying, select the Stop button.
The Add Network button appears.
4
――Connection Methods: You can setup the wireless network connection in three ways.
If the Enter password. screen appears, go to step 5. If you select a wireless router that does not
have security, go to step 7.
――If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC
(Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure
the SSID and WPA key in either mode.
In the list of networks, press the ▲ or ▼ button to select a network, and then press the E button
5
If the router has security, enter the Enter password. (Security key or PIN).
Auto Setup (Using the Auto Network Search function), Manual Setup, WPS(PBC)
106
6
When done, use the right arrow button to move the cursor to Done, and then press E. The
How to set up manually
network connection screen appears and the verification process starts.
1
Set Network type to Wireless from the Network Settings page.
2
The Network function searches for available wireless networks. When done, it displays a list of the
――A connection with the router is established, but the Internet cannot be accessed.
7
When the connection has been verified, the “Your wireless network and Internet connection
available networks.
are setup and ready to use.” message appears.
3
Manual Network Setup (Wireless)
In the list of networks, press the u or d button to select a network, and then press the E button
twice.
Offices may use static IP addresses.
――If the desired wireless router does not appear, select Refresh to search again.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server
address. Enter these values manually.
――If the router cannot be found after retrying, select the Stop button.
Getting the Network Connection Values
The Add Network button appears.
4
If the Enter password. screen appears, go to step 5. If you select a wireless router that does not
have security, go to step 7.
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
5
If the router has security, enter the Enter password. (Security key or PIN).
2
In the pop-up menu that appears, click Status.
6
When done, use the right arrow button to move the cursor to Done, and then press E. The
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
network connection screen appears and the verification process starts.
7
Select Stop while network connections are being attempted. This will stop the connection.
8
Select IP Settings on network connection screen. The IP Settings screen appears.
9
Select the field at the top, press E, and then set IP Settings to Enter manually. Repeat the entry
process for each field in the IP Address.
――Setting IP Settings to Enter manually automatically changes DNS setting to Enter manually.
107
10When done, select OK at the bottom of the page, and then press E. The network test screen
appears and the verification process starts.
11When the connection has been verified, the “Your wireless network and Internet connection
are setup and ready to use.” message appears.
WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
1
Set Network type to Wireless from the Network Settings page.
2
Select WPS(PBC), press E, and then press E again.
3
Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires
all the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.
108
Wi-Fi Direct
MENU m → Network → Wi-Fi Direct → ENTER E
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a router.
To use this function, your mobile device
should be supported by the Wi-Fi Direct.
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1
Go to Wi-Fi Direct screen. The product starts to search devices.
2
Turn on the Wi-Fi Direct function on your device. Select the desired Wi-Fi device.
•• PBC (Push Button Configuration): Press the WPS(PBC) button on your Wi-Fi device within 2 minutes. Your product automatically acquires all the network setting
values it needs and connects to your network.
•• PIN: Input the displayed PIN on your device.
――If you want to disconnect the device, select the connected Wi-Fi device, and then select Disconnected.
Multimedia Device Settings
MENU m → Network → Multimedia Device Settings → ENTER E
Allow other devices such as smart phones and tablets on your network, to share content with your product.
109
Screen Mirroring
Device Name
MENU m → Network → Screen Mirroring → ENTER E
MENU m → Network → Device Name → ENTER E
Connect a mobile device that supports the mirroring function to the product. This allows the screen and
sound from the mobile device to be outputted on the product. Mirroring refers to outputting the screen
and sound from a mobile device on a display device.
――To use Screen Mirroring, make sure the mobile device supports the mirroring function such as
Select or enter a device name.
This name can be shown on network remote controls over the network.
•• User Input / [Signage]Display 1 ~ 6
AllShare Cast, WiDi (version 3.5 or higher) and Miracast. To check if the mirroring function is available,
visit the mobile device manufacturer website.
――Screen or sound output may be choppy if there is network congestion.
Screen Mirroring
Run the mirroring function from the mobile device. The mobile device automatically searches and
displays the product in a list.
――If the mobile device cannot connect to the product, turn them off and then on again, and try again.
110
Chapter 10
System
Accessibility
Audio Description
(Not available in all locations) (for digital broadcasts)
MENU m → System → Accessibility → ENTER E
This function handles the Audio Stream for the AD (Audio Description) which is sent along with the Main audio from the
broadcaster.
Accessibility
•• Audio Description: Turn the audio description function on or off.
•• Volume: Adjust the audio description volume.
Audio Description
Off
Subtitle
Off
Menu Transparency
Medium
Subtitle
Show subtitles.
•• Subtitle Mode: Set the subtitle mode.
High Contrast
Off
•• Subtitle Language: Set the subtitle language.
Enlarge
Off
Primary Subtitle
Set the primary subtitle language.
Secondary Subtitle
-- The displayed image may differ depending on the model.
Set the secondary subtitle language.
111
Menu Transparency
Accessibility
Audio Description
Off
Subtitle
Off
Menu Transparency
Medium
High Contrast
Off
Enlarge
Off
Adjust transparency of menu box.
•• High / Medium / Low
High Contrast
Set the background and font to high-contrast colours in Menu. Menu transparencies become opaque when the option is
selected.
•• Off / On
Enlarge
Set whether to enlarge highlighted item in Menu.
•• Off / On
-- The displayed image may differ depending on the model.
112
Setup
Initial settings (Setup)
After powering on the product for the first time, configure basic settings such as the language, channel and time.
MENU m → System → Setup → ENTER E
Press the
button.
――Initial Setup automatically changes Source to TV.
System
――The default PIN number for a new product set is “0-0-0-0”.
1
Accessibility
Selecting a language.
Setup
Press the u or d button, and then press the E button. Specify the OSD menu language.
2
Time
Auto Source Switching
Display Orientation
-- Landscape / Portrait
Configure the menu page orientation.
Power Control
3
Eco Solution
Temperature Control
Menu Language
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front
panel within select hours to prevent overheating.
77
-- Off (Recommended) / 4 hours / 6 hours / 8 hours
――Availability depends on the specific model and area.
4
-- The displayed image may differ depending on the model.
Network Settings
Set up your network connection. Press the E button to start. If you do not know your network set up information or
want to set to it later, select Skip. You can set up the network connection later using the Network menu.
5
Configure your TV
Choose where you are watching your TV.
Select the broadcast signal connected to the product.
-- Aerial (Direct to TV) / No channels (display only)
113
6
Auto Tuning
-- Aerial: Terrestrial / Cable
-- Channel Type: Digital & Analogue / Digital / Analogue
This feature automatically searches and configures broadcast signals connected to the product.
To configure settings later, press the Stop button.
――Auto Tuning does not appear if No channels (display only) is selected.
7
Clock Set
Set the current date and time, and then select Next.
8
Device Name
-- User Input / [Signage]Display 1 ~ 6
Select or enter a device name.
This name can be shown on network remote controls over the network.
9
Setup Complete
Congratulations! Setup is complete and you're ready to get started.
To watch TV using the product now, select OK.
114
Time
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time
using the Timer function.
MENU m → System → Time → ENTER E
Clock
Set the current year, date and time.
――Press the INFO button if you want to view the current time.
Time
Clock
Clock Mode
DST
Off
Set the current time manually or automatically.
Sleep Timer
Off
Auto: Have the product set the current time automatically using the time from a digital channel.
――You must have the cable or an antenna connected to the product to set the time automatically.
Manual: Set the current time manually.
-- The displayed image may differ depending on the model.
Clock Set
Select Clock Set. Select Date or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow buttons to
move from one entry field to the next. Press E when done.
――Available only when Clock Mode is set to Manual.
――You can set the Date and Time directly by pressing the number buttons on the remote control.
Time Zone
Select your time zone.
――This function is only available when the Clock Mode is set to Auto.
Time Offset
If the current time that has been automatically set is different from the actual time, adjust the hour between the interval -12
hours and +12 hours.
――Time Offset is only available when Clock Mode is set to Auto and the antenna is connected.
――When the current time information cannot be received through the signal from a broadcaster, the current time is set
through the network (e.g., when watching TV through a cable broadcast receiver or satellite receiver).
115
DST
Time
Switches the DST (Daylight Saving Time) function on or off.
Clock
Off / Auto / Manual
DST
Off
Sleep Timer
Off
-- The displayed image may differ depending on the model.
•• Start Date: Set the start date of Daylight Saving Time.
•• End Date: Set the end date of Daylight Saving Time.
•• Time Offset: Select the correct time offset your timezone.
――Start Date, End Date and Time Offset are enabled only when DST is set to Manual.
Sleep Timer
Automatically shuts off the product after a preset period of time.
(Off / 30 min / 60 min / 90 min / 120 min / 150 min / 180 min)
――Use the up and down arrows to select a period of time, and then press E. To cancel Sleep Timer, select Off.
116
Auto Source Switching
Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the display will
automatically search the different video input sources for active video.
MENU m → System → Auto Source Switching → ENTER E
Auto Source Switching
When the Auto Source Switching is On, the display video source will automatically be searched for active video.
Auto Source Switching
The Primary Source selection will be activated, if the current video source is not recognized.
Auto Source Switching
Primary Source Recovery
Off
Off
끄기
Primary Source
All
Secondary Source
TV
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an active source,
each search checking the primary and then secondary source. If both searches fail, the display will return to the first video
source and display a message indicating that there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking
for an active video source, returning back to the first video source in the sequence if no video is found.
Primary Source Recovery
-- The displayed image may differ depending on the model.
Select whether to restore the selected primary input source when a primary input source is connected.
――The Primary Source Recovery function is disabled if Primary Source is set to All.
Primary Source
Specify Primary Source for the automatic input source.
Secondary Source
Specify Secondary Source for the automatic input source.
――The Primary Source Recovery function is disabled if Primary Source is set to All.
117
Power Control
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
MENU m → System → Power Control → ENTER E
Max. Power Saving
Power Control
Auto Power On
Off
Max. Power Saving
On
Standby Control
•• Off / On
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
•• Off / On
――Available only PC, HDMI mode.
Auto
Network Standby
Off
-- The displayed image may differ depending on the model.
118
Standby Control
Power Control
Auto Power On
Off
Max. Power Saving
On
Standby Control
Auto
Network Standby
Off
You can set the screen standby mode to be applied when an input signal is received.
•• Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
•• Off
The message No Signal will appear if no input signals are detected.
――The Standby Control option is only enabled when Source is set to PC or HDMI.
――If No Signal is displayed although a source device is connected, check the cable connection.
-- The displayed image may differ depending on the model.
――If No Signal Message is set to Off, the No Signal message does not appear.
If this is the case, set No Signal Message to On.
•• On
Power-saving mode will activate if no input signals are detected.
Network Standby
This feature keeps the network power on when the product turns off.
•• Off / On
119
Eco Solution
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
MENU m → System → Eco Solution → ENTER E
•• Off / Low / Medium / High
Eco Sensor
Eco Solution
Energy Saving
Off
Eco Sensor
On
Screen Lamp Schedule
Off
No Signal Power Off
15 min
Auto Power Off
Off
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
•• Off / On
――Adjusting the Backlight setting under Picture while Eco Sensor is on will disable the Off.
Min. Backlight
When Eco Sensor is On, you can manually adjust the minimum screen brightness. Min. Backlight is the darkest backlight
mode. Make sure the Min. Backlight setting is lower than the Backlight setting.
――If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding
light intensity.
-- The displayed image may differ depending on the model.
Screen Lamp Schedule
Enable or disable the lamp schedule.
•• Off / On
Schedule 1, Schedule 2
Time
The panel brightness will change to the brightness set in Time at a specified time.
Lamp
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
•• 0 ~ 100
120
No Signal Power Off
Eco Solution
Energy Saving
Off
Eco Sensor
On
Screen Lamp Schedule
Off
No Signal Power Off
15 min
Auto Power Off
Off
•• Off / 15 min / 30 min / 60 min
――Disabled when an attached PC is in power saving mode.
――The product will automatically power off at a specified time. The time can be changed as required.
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front panel
within select hours to prevent overheating.
•• Off / 4 hours / 6 hours / 8 hours
――Availability depends on the specific model and area.
-- The displayed image may differ depending on the model.
Temperature Control
This function detects the internal temperature of the product. You can specify the temperature range that is acceptable.
The default temperature is set to 77 C.
MENU m → System → Temperature Control → ENTER E
The recommended operating temperature for this product is 75 to 80 C (based on an ambient temperature of 40 C).
――The screen will become darker if the current temperature exceeds the specified temperature limit. If the temperature
continues to rise, the product will power off to prevent overheating.
System
Temperature Control
Save power by turning the device off when no signal is received from any source.
77
-- The displayed image may differ depending on the model.
121
Device Manager
MENU m → System → Device Manager → ENTER E
Device Manager
Keyboard Settings
Mouse Settings
Configure options for external input devices connected to the product.
Keyboard Settings
Connecting a keyboard to the product displays the Keyboard Settings menu.
Select Keyboard
Select a keyboard you want to use from the available connected keyboards.
――It is possible to use only one connected keyboard.
Add Bluetooth Keyboard
-- The displayed image may differ depending on the model.
Connecting a Bluetooth keyboard
1
Place the Bluetooth keyboard into standby status.
2
Select MENU m → System → Device Manager → Keyboard Settings → Add Bluetooth Keyboard. The SMART
Signage TV automatically scans for available keyboards.
――If your keyboard was not detected, position the keyboard close to the SMART Signage TV, and then select Refresh.
The SMART Signage TV scans for available keyboards again.
3
Select the Bluetooth keyboard from the scan list, and then select Pair and connect. A number appears on the screen.
4
Enter the number using the Bluetooth keyboard. This pairs the Bluetooth keyboard to the SMART Signage TV.
122
Keyboard Options
――Depending on the country.
Keyboard Language
Specify the keyboard input language.
Keyboard type
Specify the keyboard type.
Switch Input Language
Configure the key combination used to change the input language.
123
Device Manager
Keyboard Settings
Mouse Settings
Mouse Settings
Connecting a mouse to the product displays the Mouse Settings menu.
Select Mouse
Configure mouse connection settings or options for connected mouse devices.
――Among connected mouse devices, only one mouse can be used.
-- The displayed image may differ depending on the model.
Add Bluetooth Mouse
Connecting a Bluetooth mouse
1
Place the Bluetooth mouse in standby status.
2
Select MENU m → System → Device Manager → Mouse Settings → Add Bluetooth Mouse.
3
Select the Bluetooth mouse from the scanned list, and then select Pair and connect. This pairs the Bluetooth mouse to
the SMART Signage TV.
Mouse Options
――Depending on the country.
Primary Button
Select a button on the mouse that will perform basic functions (click and enter).
•• Left (default) / Right
Pointer Speed
Set the mouse pointer speed.
•• Slow / Standard / Fast
124
Change PIN
MENU m → System → Change PIN → ENTER E
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN.
When the Confirm screen disappears, press the Close button. The product has memorized your new PIN.
――Default password: 0 - 0 - 0 - 0
System
Change PIN
-- The displayed image may differ depending on the model.
125
Security
Safety Lock
――Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
If you want to change the PIN number, use the Change PIN function.
MENU m → System → Security → ENTER E
It sets safe lock function.
•• Off / On
Security
Safety Lock
Power On Button
Off
On
Button Lock
Off
USB Auto Play Lock
Off
Mobile Connection Lock
Off
All the menus and buttons of the product and remote control, except for the LOCK button on the remote control, will be
locked by the Safety Lock function.
To unlock the menus and buttons, press the LOCK button and then enter the password (default password: 0 - 0 - 0 - 0).
Power On Button
Enable or disable the power button on the remote control when Safety Lock is On.
•• Off / On
Button Lock
This menu can be used to lock the buttons on the product.
-- The displayed image may differ depending on the model.
Only the remote control can control the product if Button Lock is set to On.
•• Off / On
USB Auto Play Lock
Select whether to automatically play MagicInfo content saved on a connected USB device.
•• Off
Play MagicInfo content saved on the USB device automatically.
•• On
Do not play MagicInfo content saved on the USB device automatically.
――Connecting a USB device containing MagicInfo content displays "USB Auto Play Lock : On" for five seconds.
126
Mobile Connection Lock
Security
Safety Lock
Power On Button
Off
On
Button Lock
Off
USB Auto Play Lock
Off
Mobile Connection Lock
Off
Configure the product so that it cannot be searched from mobile devices.
This feature is provided for customers that do not want their device to be included in searches through Contents Creator on
mobile devices. Devices are hidden for security reasons.
•• Off: Configure SMART Signage TV to not be included in searches from mobile devices.
•• On: Configure SMART Signage TV to be searchable from mobile devices.
-- The displayed image may differ depending on the model.
127
Smart Security
General
Security provided to protect your TV and connected storage devices against viruses includes.
MENU m → System → General → ENTER E
Smart Security
Use this option to turn Smart Security protection On/Off.
General
•• Off / On
Smart Security
On
BD Wise
On
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
DivX® Video On Demand
Game Mode
-- The displayed image may differ depending on the model.
Off
Scan
Inspect the TV and connected storage devices to check for viruses.
Isolated List
This is the list of items that have been Isolated for containing viruses.
Allowed List
This is the list of items that have been Allowed as not containing viruses.
Settings
Set the Smart Security options.
Auto Scan
Scan automatically when the TV is turned on.
•• Off / On
Move to Isolated List automatically
Moves viruses to the Isolated List automatically.
•• Off / On
128
BD Wise
General
Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theatre products which support BD Wise. When BD
Wise is turned On, the picture mode is automatically changed to the optimal resolution.
Smart Security
On
BD Wise
On
•• Off / On
――Available when you connect Samsung products that support BD Wise through an HDMI cable to the product.
Anynet+ (HDMI-CEC)
On
――The BD Wise function is enabled only when a source device with the BD Wise function is connected.
HDMI Hot Plug
On
DivX® Video On Demand
Game Mode
Off
-- The displayed image may differ depending on the model.
129
Anynet+ (HDMI-CEC)
General
Smart Security
On
Anynet+ (HDMI-CEC)
BD Wise
On
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
――You can only control Anynet+ devices using the product remote control, not the buttons on the product.
――Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
DivX® Video On Demand
Game Mode
――The product remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
Off
――While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display. It does not work if the
AV device is connected as a secondary display.
――Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet+ Menu
-- The displayed image may differ depending on the model.
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the product.
――Press the TOOLS button to display the Anynet+ menu and select a menu you want.
Anynet+ Menu
Description
View TV
Changes Anynet+ mode to TV mode.
Select Device
Shows the Anynet+ device list.
(device_name) MENU
Shows the menu of the connected device menus. E.g. if a DVD player is connected,
the disc menu of the DVD player will appear.
(device_name) Tools
Shows the tools menu of the connected device. E.g. if a DVD player is connected, the
tools menu of the DVD player will appear.
――Depending on the device, this menu may not be available.
(device_name) Title Menu
Shows the title menu of the disc in the connected device. E.g. If a DVD player is
connected, the title menu of the movie in the DVD player will appear.
――Depending on the device, this menu may not be available.
130
Auto Turn Off
Anynet+ (HDMI-CEC)
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
Anynet+ (HDMI-CEC)
On
Auto Turn Off
No
Search for Devices
-- The displayed image may differ depending on the model.
•• No / Yes
――If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off.
――May not be enabled depending on the device.
Search for Devices
Switching between Anynet+ Devices
1
Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press E.
2
Select Select Device, and then press the E button.
If you cannot find a device you want, select Refresh to refresh the list.
3
Select a device, and then press the E button. You can switch to the selected device.
――The Select Device menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu.
――Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in
progress.
――If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use
the Anynet+ function.
――Make sure to switch to an Anynet+ device by using the Select Device.
131
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution
•• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
•• Check if the Anynet+ device power cord is properly connected.
•• Check the Anynet+ device’s Video/Audio/HDMI cable connections.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
•• Check whether the remote control is Anynet+ compatible.
•• Anynet+ doesn’t work in certain situations. (initial setup)
•• If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your product
off and on again.
•• Check if the Anynet+ function of the Anynet device is set on.
I want to start Anynet+.
•• Check if the Anynet+ device is properly connected to the product and check if the Anynet+ (HDMI-CEC) is set to On in the
System menu.
•• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
•• Select View TV in the Anynet+ menu.
•• Press the SOURCE button on the product remote control and select a non- Anynet+ device.
The message “Disconnecting
Anynet+ device ...” appears on
the screen.
•• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
The Anynet+ device does not play.
•• You cannot use the play function when initial setup is in progress.
•• Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
132
Problem
The connected device is not
displayed.
Possible Solution
•• Check whether or not the device supports Anynet+ functions.
•• Check whether or not the HDMI cable is properly connected.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
•• Search Anynet+ devices again.
•• Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable.
•• Some HDMI cables may not support Anynet+ functions.
•• If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please
repeat the device scan.
133
HDMI Hot Plug
General
Smart Security
On
BD Wise
On
Anynet+ (HDMI-CEC)
On
HDMI Hot Plug
On
DivX® Video On Demand
Game Mode
This feature is used to activate the time delay to turn on a DVI/HDMI source device.
•• Off / On
DivX® Video On Demand
Shows the registration code authorized for the product.
If you connect to the DivXⓇ web site and register using that code, you can download the VOD registration file.
For more information about DivXⓇ VOD, visit “http://vod.divx.com”.
Off
Game Mode
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game mode.
-- The displayed image may differ depending on the model.
•• Off / On
――Precautions and limitations for Game Mode
To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
――Game Mode is not available when the input source is set to TV.
134
Reset System
This option returns the current settings under system to the default factory settings.
MENU m → System → Reset System → ENTER E
System
Reset System
-- The displayed image may differ depending on the model.
135
Chapter 11
Support
Self Diagnosis
MENU m → Support → Self Diagnosis → ENTER E
Signal Information
You can check the digital channel's signal information and strength.
――If your SMART Signage TV is attached to a separate, over-the-air antenna, you can use the signal strength information to adjust the antenna for increased signal
strength and improved HD channel reception.
――This function is only available for digital channels.
Reset
You can restore all SMART Signage TV settings (excluding the Internet and network settings) to the factory defaults.
1
Select Reset. The security PIN entry window appears.
2
Enter the security PIN and select Yes. All settings are then reset. The TV turns off and on again automatically and displays the Setup screen.
――For more information on Setup, refer to the user manual that came with the SMART Signage TV.
136
Software Update
MENU m → Support → Software Update → ENTER E
-- Current version: This is the software
version already installed in the product.
The Software Update menu lets you upgrade your product software to the latest version.
――Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software upgrade.
――When you upgrade software, all video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can
easily reset them after the upgrade.
Update now
Update the software to the latest version.
Auto update
This feature automatically updates the product when not in use.
•• Off / On
Use Mode
MENU m → Support → Use Mode → ENTER E
Select the appropriate mode according to where the product is used.
If you choose Demo Mode, the demo content will be played automatically and the picture settings will be reset in 5 minutes after change.
•• Standard Use / Demo Mode
137
Contact Samsung
MENU m → Support → Contact Samsung → ENTER E
View this information when your product does not work properly or when you want to upgrade the software.
You can find information regarding our call centres and how to download products and software.
――Contact Samsung and find the product Model Code and Software Version.
138
Go to Home
Accessible using the HOME
Go to Home to play a variety of content from a memory device or a connected network.
Player
button on the remote control.
Search or play channels or content saved on devices.
MENU m → Support → Go to Home → ENTER E
Clone Product
Export settings on the product to an external storage device. You can also import settings from an external storage device.
Device Name
[Signage]
Player
Play a variety of content from internal
and external storage devices.
This option is useful when assigning the same settings to several products.
Internal storage
** GB available ** GB
External Storage
Not connected
ID Settings
Clone Product
ID Settings
Connectivity
Network Status
Picture Mode
On/Off Timer
Ticker
More settings
Assign an ID to a set.
Connectivity
Configure Network Settings and Wi-Fi Direct.
-- The displayed image may differ depending on the model.
-- Refer to the "Home feature" chapter for details on sub-menu items.
139
Network Status
Check the current network and Internet connection.
Picture Mode
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
On/Off Timer
――You must set the clock before you can use On/Off Timer.
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
The power is turned on with the specified volume or input source.
Ticker
Input text while a video or image is displayed and display the text on the screen.
More settings
The picture settings menu appears.
140
Reset All
This option returns all the current settings for a display to the default factory settings.
MENU m → Support → Reset All → ENTER E
Support
Reset All
-- The displayed image may differ depending on the model.
141
Chapter 12
Playing photos, videos and music (Media Play)
Enjoy videos, photos, music files saved on a USB Mass Storage Class (MSC) device.
Play photos, videos or music saved on a storage device.
Play a variety of content using the following methods.
•• Using a USB device: Play media content such as videos, photos and music from a USB device.
•• Connecting a storage device: Play media content saved on a storage device such as a smartphone, camera, PC or cloud service.
Read the following before using media play with a USB device
Caution
•• Before connecting a USB device to the product, back up files to ensure your data is not damaged or lost.
Samsung Electronics is not liable for any damage or loss of data.
•• Do not remove a USB device while it is loading.
•• If a USB device is connected using a USB extension cable, the USB device may not be recognized or files saved on the device may not be able to be read.
•• If the product does not recognize a connected USB device, the files on the USB device may be corrupted or may not be able to be played.
If this occurs, connect the USB device to the PC to format the device, then make sure the device is connected properly.
•• USB HDD greater than 2TB is not supported.
142
Compatible devices with media play
•• Some USB digital cameras, smartphones and audio devices may not be compatible with the product.
•• Media play is only compatible with USB MSC devices.
•• MSC device refers to a Mass Storage Class Bulk-Only Transport device.
Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs. (USB hubs are not supported.)
These MSC devices must be connected directly to a USB port on the product.
•• If more than one Picture Transfer Protocol (PTP) device is connected, only one will work at a time.
•• If multiple MSC devices are connected, some devices may not be recognized. USB devices that require high power (higher than 500mA or 5V) may not be supported.
•• If an overheating warning message appears when a USB device is connected or used, the USB device may not be recognized or function properly.
•• The screensaver activates if the product is left idle for a period of time specified in Auto Protection Time.
•• Power-saving mode on some external hard disk drives may automatically deactivate after connecting to the product.
File system and formats
•• Media play may not function properly with unlicenced multimedia files.
•• Media Transfer Protocol (MTP) is not supported.
•• Supported file systems include FAT16, FAT32 and NTFS (read only).
•• Media play supports the sequential JPEG format.
It does not support the progressive JPEG format.
•• Images with a higher resolution take longer to be displayed on the screen.
•• The maximum JPEG resolution supported is 15360x8640 pixels.
•• If a file is incompatible or corrupted, a message Not Supported File Format. appears.
•• When sorting files in folder view mode, a maximum of 1000 files can be displayed in each folder.
•• If a USB device contains 8000 files and folders or more, some files and folders may not open.
•• DRM MP3 files downloaded from websites that charge a fee cannot be played.
Digital Rights Management (DRM) refers to a system for protecting the copyrights of data circulated via the Internet or other digital media by enabling secure
distribution and/or disabling illegal distribution of the data.
143
Using a USB device
Connecting a USB device
1
Turn on your product.
2
Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product.
3
The Player page automatically appears as soon as a USB device connects to the product.
――If only one USB device is connected, files saved on the USB device are displayed automatically.
It is recommended to use a USB HDD that
has a power adapter.
――To view content saved on a USB device, connect the USB device to a USB port on the product.
Removing a USB device
Removing a USB device from Source
1
Press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
SOURCE → Source
It is recommended to remove a USB
device using the Disconnect USB Device
function.
2
Select USB from Source, and then press the TOOLS button on the remote control. The Options menu is displayed.
3
Select Disconnect USB Device and wait until the USB device is disconnected. The USB device is disconnected.
144
Playing media content from a PC/mobile device
Approving a PC/mobile device connection
Play photos, videos or music saved on a PC or mobile device.
To play media content from a PC or mobile device on the product, the connection with the PC or mobile device must be approved.
――The media playback feature is available on any devices that support DLNA DMC. The DLNA DMC feature allows you to search media content and control content
playback from a product after connecting a PC or mobile device to the product.
1
Press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
SOURCE → Source
2
Select Network from Source. The Network Device menu appears.
3
Select Options from the screen, and then select Multimedia Device Settings. A list of devices connected to the product will appear.
4
Select a device and approve the device connection. Playback is only available on devices that are permitted to connect.
――Sending a media content playback request from a PC or mobile device displays a prompt asking if connection with the product is permitted. Conveniently connect
the devices using the prompt.
――For details on how to configure a network, refer to the section Network Settings.
――Ensure the product and PC are connected to the same network subnet.
All IP addresses are made up of four parts separated by dots.
(E.g. IP address 111.222.333.444) The product should have the same IP address as the PC, except for the fourth part of the address, if they are connected to the same
subnet. (E.g. 111.222.333.***)
145
When connected to a home network (DLNA)
Play content saved on a device connected to a home network.
――Playing media content using a non-Samsung DLNA server may result in a compatibility issue.
――Playback of some media content shared with a PC or mobile device may not be possible depending on the content encoding type or the content file format. Some
functions may not be available.
――Media content may not play properly if there is network congestion. If this is the case, use a USB device.
1
Press SOURCE on the remote control. Alternatively, go to Source using the OSD menu.
SOURCE → Source
2
Select Network from Source. The Network Device menu appears.
3
Select a device connected via the home network (DLNA). A list of files and folders shared with the selected device will appear.
4
Select media content to play from the list. Play the selected media content.
Features provided in the media content list page
SOURCE → Source → USB
The media content list page on a storage device provides the following features.
•• Sort by
Rearrange the media content list under the selected file format in a desired view mode.
-- This menu item is not available if Filter is set to All.
•• Filter
Among Photos, Videos and Music content saved on a storage device, view content files under a desired file format only.
•• Options
-- This menu item is not available if Filter is set to All.
146
Menu items in the media content list page
Option Name
Operations
Photos
Videos
Music
Slide Show
Start a slideshow.
――This menu item is not available if Sort by is set to Folder.
Encoding
Select an encoding language if the title of media content appears corrupted.
c
Rename Playlist
Rename a playlist.
c
Delete Playlist
Delete a playlist.
c
Add to Playlist
Add files to a playlist or create a new playlist.
c
Play Selected
Select and play desired content from the media content list.
c
c
c
Send
Send media content to another storage device. This is similar to the "copy" feature
on PCs.
c
c
c
Index
Select an index to conveniently locate media content if a storage device contains a
lot of media content.
――Provided indices include dates and alphanumeric characters.
c
c
c
c
――This menu item is not available if Sort by is set to Folder.
147
Available buttons and features during photo playback
Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear.
•• Pause / Play
Start or stop a slideshow. Using a slideshow, it is possible to play all photos in a folder.
-- Pressing the INFO button while a
device name is selected will display
information about the selected device.
-- Pressing the INFO button while a file is
selected will display information about
the selected file.
•• Previous / Next
View the previous or next photo.
•• Settings
Option Name
Slideshow Settings
Operations
Speed: Change the slideshow speed.
Effects: Apply transition effects between photos.
Rotate
Rotate photos.
Zoom
Zoom in on photos up to 4x.
Picture Mode
Change the Picture Mode.
Background Music
Play background music while viewing photos.
――Make sure a music file is saved on the same device.
――The mini player is displayed while background music (Background Music) is playing. Using the mini player, pause the music currently
playing or change to another music.
Sound Mode
Change the Sound Mode.
――This menu item is only available when background music (Background Music) is playing.
Select Speakers
Select a speaker that will output the background music (Background Music).
――This menu item is only available when background music (Background Music) is playing.
Send
Send open photos to another storage device. This is similar to the "copy" feature on PCs.
Information
View information about a file.
148
Available buttons and features
during video playback
Option Name
Select Scene
Operations
Thumbnails: Select a scene and play the video from the scene.
――Thumbnails is not available if 1) the thumbnail of the video is not extracted yet, 2) the video
contains audio only or 3) the video play time is shorter than 60 seconds.
Pressing the E or TOOLS button displays the following buttons. The RETURN
button makes the buttons disappear.
Chapter Titles: Select and play another video in the same folder.
Time Bar: You can use the l and r buttons to scan through the file in 10-second intervals or
enter a specific time value to jump to that point in the video.
•• Pause / Play
Pause or play a video.
The following features are available in pause mode. Note that sound cannot
be heard in pause mode.
•• Rewind / Fast forward
Rewind or fast forward a video. Speed up playback up to 3x, if required. To
change the playback speed to the original speed, select ∂.
Subtitle
Language / Sync / Reset Sync / Size / Encoding
――If the subtitle is displayed incorrectly, change Encoding options.
Repeat
Configure Repeat.
Off
Repeat One: Play the current video repeatedly.
•• Previous / Next
To play the previous video, select  twice. Selecting  once will play the
current video from the beginning.
To play the next video, select ‚.
•• Settings
Repeat All: Play all videos in a folder repeatedly.
Rotate
Rotate an image.
Picture Size
Change the screen size (Picture Size). Supported screen sizes vary depending on the image.
Picture Mode
Change the Picture Mode.
Sound Mode
Change the Sound Mode.
Select Speakers
Select a speaker that will output sound from the product.
Audio Language
Play a video using a desired language. This feature only activates when a streaming file that
supports multiple audio formats is playing.
Information
View information about a file.
149
Available buttons and features during music playback
•• Pause / Play
Pause or play music.
•• Rewind / Fast forward
Rewind or fast forward music. Speed up playback up to 3x, if required. To play the previous music file, select ∂ twice.
•• Previous / Next
To play the previous music file, select  twice. Selecting  once will play the current music from the beginning.
To play the next music file, select ‚.
•• Repeat
Configure Repeat mode. Repeat One plays the current music file repeatedly. Repeat All plays all files in a folder repeatedly.
•• Shuffle
Enable or disable shuffle playback mode.
•• Select Speakers
Select a speaker that will output sound from the product.
•• Sound Mode
Change the Sound Mode.
•• Settings
150
Supported Subtitle and Media play file formats
Subtitle
External
Internal
•• MPEG-4 timed text (.ttxt)
•• Xsub
Container: AVI
•• SAMI (.smi)
•• SubStation Alpha
Container: MKV
•• SubRip (.srt)
•• SubViewer (.sub)
•• Advanced SubStation Alpha
Container: MKV
•• Micro DVD (.sub or .txt)
•• SubStation Alpha (.ssa)
•• SubRip
Container: MKV
•• Advanced SubStation Alpha (.ass)
•• Powerdivx (.psb)
•• MPEG-4 timed text
Container: MP4
Supported image resolutions
File Extension
Type
Resolution
*.jpg, *.jpeg
JPEG
15360 x 8640
*.png
PNG
1920 x 1080
*.bmp
BMP
1920 x 1080
*.mpo
MPO
15360 x 8640
151
Supported music file formats
File Extension
Type
Codec
Comments
*.mp3
MPEG
MPEG1 Audio Layer 3
*.m4a, *.mpa, *.aac, *.3ga
MPEG4
AAC
*.flac
FLAC
FLAC
The Seek (jump) function is not supported.
Supports up to 2 channel
Supported Video Formats
•• Video content will not play, or not play correctly, if there is an error in the content or the container.
•• Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.
•• If the Index Table is in error, the Seek (Jump) function is not supported.
•• You may experience file stuttering while playing a video through a network connection.
•• The menu may take longer to appear if the video’s bit rate exceeds 10Mbps.
•• Some USB/digital camera devices may not be compatible with the player.
Video Decoder
Audio Decoder
Supports up to H.264, Level 4.1
Supports up to WMA 10 Pro 5.1 channel.
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
WMA lossless audio is not supported.
For all Video codecs except MVC, VP8, VP6:
QCELP, AMR NB/WB are not supported.
•• Below 1280 x 720: 60 frame max
If Vorbis is only in Webm container, supports up to 2 channel.
•• Above 1280 x 720: 30 frame max
GMC 2 over is not supported.
Supports only BD MVC Spec.
152
File
Extension
Container
*.avi
AVI
*.mkv
MKV
*.asf
ASF
*.wmv
MP4
*.mp4
3GP
*.mov
VRO
*.3gp
VOB
*.vro
PS
*.mpg
TS
Video Codec
DivX 3.11 / DivX 4 / DivX 5 /
DivX 6
Resolution
1920 x 1080
Frame rate
(fps)
6~30
Bit rate
(Mbps)
30
Audio Codec
AC3
LPCM
ADMPCM
MPEG4 SP / ASP
(IMA, MS)
AAC
HE-AAC
H.264 BP / MP / HP
WMA
DD+
Motion JPEG
MPEG(MP3)
*.mpeg
DTS Core
*.ts
G.711(ALaw,μ-Law)
Window Media Video v9
*.tp
*.trp
MPEG2
*.mov
*.flv
MPEG1
*.vob
*.svi
*.m2ts
*.mts
*.divx
*.webm
WebM
VP6
640 x 480
MVC
1920 x 1080
VP8
4
24 / 25 / 30
40
6 ~ 30
8
Vorbis
153
Chapter 13
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Centre
Before calling Samsung Customer Service
Centre, test your product as follows. If
the problem persists, contact Samsung
Customer Service Centre.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
If the screen remains blank, check the PC
system, video controller and cable.
1
Power off both the PC and product.
2
Disconnect all the cables from the product.
3
Power on the product.
4
If No Signal is displayed, the product is operating normally.
Checking the Resolution and Frequency
Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected (refer to Supported Resolutions).
154
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connection is secure.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product and
PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the
screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust
the screen settings.)
PC is shown in Source when a PC is not connected.
PC is always shown in Source irrespective of whether or not a PC is connected.
Screen issue
The power LED is off. The screen will not switch on.
Make sure that the power cord is connected.
No Signal is displayed on the screen.
Check that the product is connected correctly with a cable.
Check that the device connected to the product is powered on.
Not Optimum Mode is displayed.
This message is displayed when a signal from the graphics card exceeds the product's maximum
resolution and frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to
the product specifications.
The images on the screen look distorted.
Check the cable connection to the product.
155
Screen issue
The screen is not clear. The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
Check that the resolution and frequency of the PC and graphics card are set within a range compatible
with the product. Then, change the screen settings if required by referring to the Additional
Information on the product menu and the Standard Signal Mode Table.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen colour is inconsistent.
Go to Picture and adjust the Colour Space settings.
White does not really look white.
Go to Picture and adjust the White Balance settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
The product will turn off automatically.
Go to System and make sure Sleep Timer is set to Off.
Press any key on the keyboard or move the mouse to return to the previous screen.
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off after 10 to 15
minutes.
Picture quality of the product is different from the dealer
shop where it was purchased.
Use an HDMI cable to obtain high-definition (HD) picture quality.
156
Screen issue
The screen display does not look normal.
Encoded video content may cause the display to appear corrupted in scenes featuring fast moving
objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does not mean
the product is defective.
A cell phone within a distance of one-meter radius may cause static on analogue and digital products.
The brightness and colour do not look normal.
Go to Picture and adjust the screen settings such as Picture Mode, Colour, Brightness and
Sharpness.
Go to System and adjust the Energy Saving settings.
Reset the screen settings to the default settings.
Broken lines are displayed on the edges of the screen.
If Picture Size is set to Screen Fit, change the setting to 16:9.
Lines (red, green or blue) are displayed on the screen.
These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the SMART Signage
TV. Contact a Samsung Service Centre to resolve the issue.
The display looks unstable and then freezes.
The screen may freeze when a resolution other than the recommended resolution is used or if the
signal is not stable. To resolve the issue, change the PC resolution to the recommended resolution.
The screen cannot be displayed in full screen.
A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen.
A video with an aspect ratio different from the product can cause black bars at the top and bottom of
the screen.
Change the screen size setting to full screen on the product or source device.
Sound issue
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
157
Sound issue
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software programme.
Video is available but there is no sound.
If an HDMI cable is connected, check the audio output settings on the PC.
Go to Sound and change Speaker Settings to Internal.
If a source device is used
•• Make sure the audio cable is properly connected to the audio input port on the product.
•• Check the audio output settings for the source device.
(For example, if an HDMI cable is connected to the SMART Signage TV, the audio setting for the
cable box may need to be changed to HDMI.)
If the product has a headphone port, make sure nothing is connected to it.
Reconnect the power cable to the device and then reboot the device.
There is static coming from the speakers.
Check the cable connection. Make sure a video cable is not connected to an audio input port.
Check the signal strength after connecting a cable.
Low signal level can cause corrupted sound.
There is audible sound when the volume is muted.
When Speaker Settings is set to External, the volume button and mute function are disabled.
Adjust the volume for the external speakers.
Audio settings for main speakers are separate from the internal speakers on the product.
Changing or muting the volume on the product does not affect an external amplifier(decoder).
Sound from the SMART Signage TV does not change after
Sound Mode is changed.
Audio settings for main speakers are separate from the internal speakers on the product.
Audio settings on a source device do not affect the internal speaker settings on the product.
158
Sound issue
There is an echo sound coming from the speakers.
Different decoding speeds between the product speakers and external speakers can cause an echo.
In this case, set Speaker Settings to External.
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
159
Other issue
The product smells like plastic.
The plastic smell is normal and disappears over time.
The product appears tilted.
Remove and then attach the stand again to the product.
Audio or video cuts out intermittently.
Check the cable connection and connect it again if required.
Using a very hard or thick cable may corrupt audio and video files.
Make sure cables are flexible enough to ensure durability. When mounting the product onto a wall, it
is recommended to use right-angle cables.
Small particles are found on the edges of the product.
The particles are part of the product design. The product is not defective.
The PIP menu is not available.
The menu is enabled or disabled depending on the Source mode.
When I try to change the PC resolution, a message "The
defined resolution is not supported." appears.
The message "The defined resolution is not supported." appears if the input source resolution
exceeds the maximum resolution of the display.
To resolve the issue, change the PC resolution to a resolution supported on the display.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
This function is available only when a source device, such as a DVD player and STB, is connected to the
product via an HDMI (RGB signal) cable.
There is no sound in HDMI mode.
Displayed picture colours may not look normal. Video or sound may not be available. This can occur if
a source device that only supports an older version of the HDMI standard is connected to the product.
If these issues occur, connect an audio cable along with the HDMI cable.
Some PC graphics cards may not automatically recognize HDMI signals that do not include sound. In
this case, manually select a sound input.
Sound input
Screen mode
PC
Auto
PC settings
DVI PC
Audio In(Stereo ports)
PC settings
160
Other issue
The IR sensor is not functioning.
Make sure the sensor light turns on when a button is pressed on the remote control.
•• If the sensor light does not turn on, turn the power switch off and then on again on the back of
the product.
(The power LED lights up red when the screen is switched off.)
If the sensor light still does not turn on after the power switch is turned off and then on again, an
internal jack may be disconnected.
Contact your nearest service centre to have the product serviced.
•• If the sensor light that is on does not flash red when a button is pressed on the remote control,
the IR sensor may be defective.
Contact your nearest service centre to have the product serviced.
•• This function is available only when a source device, such as a DVD player and STB, is connected
to the product via an HDMI (RGB signal) cable.
161
Q&A
Question
How can I change the frequency?
Answer
Set the frequency on your graphics card.
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings →
Advanced → Monitor and adjust the frequency in Monitor Settings.
•• Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor and
adjust the frequency in Monitor Settings.
-- Refer to the user manual for your PC or
graphics card for further instructions on
adjustment.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings → Advanced Settings → Monitor and adjust the frequency in Monitor
Settings.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust
resolution → Advanced Settings → Monitor and adjust the frequency in Monitor Settings.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust resolution → Advanced Settings → Monitor and adjust the frequency in Monitor
Settings.
How can I change the resolution?
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings and
adjust the resolution.
•• Windows ME/2000: Go to Control Panel → Display → Settings and adjust the resolution.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings and adjust the resolution.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust
Resolution and adjust the resolution.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust Resolution and adjust the resolution.
162
Question
How do I set powersaving mode?
Answer
•• Windows XP: Set power-saving mode in Control Panel → Appearance and Themes → Display
→ Screen Saver Settings or BIOS SETUP on the PC.
•• Windows ME/2000: Set power-saving mode in Control Panel → Display → Screen Saver
Settings or BIOS SETUP on the PC.
•• Windows Vista: Set power-saving mode in Control Panel → Appearance and Personalization
→ Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 7: Set power-saving mode in Control Panel → Appearance and Personalization →
Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 8: Set power-saving mode in Settings → Control Panel → Appearance and
Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
163
Chapter 14
Specifications
-
General
Size
Model Name
Panel
-
Dimensions (W x H
x D) / Weight
48 CLASS (47.6 inches / 120.9 cm)
55 CLASS (54.6 inches / 138.7 cm)
Display area
1054.08 mm (H) x 592.92 mm (V)
1209.6 mm (H) x 680.4 mm (V)
41.5 inches (H) x 23.3 inches (V)
47.6 inches (H) x 26.8 inches (V)
1076.1 x 624.4 x 67.1 mm / 11.3 kg
1231.6 x 711.9 x 67.8 mm / 13.6 kg
42.4 x 24.6 x 2.6 inches / 24.9 lbs
48.5 x 28.0 x 2.7 inches / 30.0 lbs
1076.1 x 681.3 x 310.5 mm / 12.3 kg
1231.6 x 770.6 x 310.5 mm / 14.6 kg
42.4 x 26.8 x 12.2 inches / 27.1 lbs
48.5 x 30.3 x 12.2 inches / 32.2 lbs
Without Stand
With Stand
V
Dimensions (W x H x D)
RH55E
Size
Display area
H
-
RH48E
Audio Output
10 W + 10 W
Power Supply
AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
D
Environmental
considerations
H
Operating
Temperature : 32 F – 104 F (0 C – 40 C)
Humidity : 10 % – 80 %, non-condensing
Storage
Temperature : -4 F – 113 F (-20 C – 45 C)
Humidity : 5 % – 95 %, non-condensing
W
164
――Plug-and-Play
This SMART Signage TV can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the SMART Signage TV and PC
system optimizes the SMART Signage TV settings. SMART Signage TV installation takes place automatically. However, you can customize the installation settings if
desired.
――Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect
product performance.
――This device is a Class A digital apparatus.
165
Power Consumption
Normal Operation
Rating
Power Indicator
Power Consumption
Stand-by
Typical
Max
Off
On
RH48E
130 W
80 W
143 W
RH55E
159 W
108 W
174.9 W
Less than 0.5 W
――The displayed power consumption level can vary in different operating conditions or when settings are changed.
――SOG (Sync On Green) is not supported.
――To reduce the power consumption to 0, disconnect the power cord. Disconnect the power cable if you will not be using the product for an extended period of time (during
vacation, etc.).
166
Preset Timing Modes
――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than
the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.
――Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85 Hz, change the vertical
frequency to 60 Hz using the CDT product before you exchange it with the LCD product.
Model Name
Synchronization
Resolution
RH48E / RH55E
Horizontal Frequency
30 - 81 kHz
Vertical Frequency
48 - 75 Hz
Optimum resolution
1920 x 1080 @ 60 Hz
Maximum resolution
1920 x 1080 @ 60 Hz
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC
does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by
referring to the graphics card user manual.
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
167
-- Horizontal Frequency
The time required to scan a single line
from the left to the right side of the
screen is called a horizontal cycle. The
reciprocal number of a horizontal cycle
is called horizontal frequency. Horizontal
frequency is measured in kHz.
-- Vertical Frequency
The product displays a single image
multiple times per second (like a
fluorescent light) to display what the
viewer sees. The rate of a single image
being displayed repeatedly per second is
called vertical frequency or refresh rate.
Vertical frequency is measured in Hz.
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1366 x 768
47.712
59.790
85.500
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 x 900 RB
60.000
60.000
108.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
168
Chapter 15
Appendix
Responsibility for the Pay Service (Cost to
Customers)
――When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•• If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
•• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.)
•• If a product is reinstalled or devices are connected additionally after installing the purchased
product for the first time.
•• If a product is reinstalled to move to a different spot or to move to a different house.
•• If customer requests instructions on how to use because of another company's product.
•• If customer requests instructions on how to use the network or another company's programme.
•• If customer requests software installation and setup for the product.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•• External impact or drop.
•• Use of supplies or separatly sold product unspecified by Samsung.
•• Repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
•• Remodeling or repairing the product by customer.
•• Using it with incorrect voltage or non-authorised electrical connections.
•• Not following the "cautions" in User Manual.
Others
•• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator, Lamp,
Filter, Ribbon, etc.)
――If customer requests a service in case the product has no defect, service fee may be charged. So
please read User Manual first.
•• If a service technician removes/cleans dusts or foreign materials inside of the product.
•• If customer requests an installation additionally after purchasing a product through homeshopping or online.
169
WEEE
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset,
USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of
where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other
household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them
through your local, free battery return system.
170
Optimum Picture Quality and Afterimage
Burn-in Prevention
Black Matrix
Common
Electrode (ITO)
Colour-Filter
Optimum Picture Quality
•• Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm)
may be brighter or darker on the panel. This does not affect product performance.
-- The number of sub-pixels by panel type: 6,220,800
Source
Drain
•• Run Auto Adjustment to improve the picture quality. If noise is still found even after auto
adjustment, adjust Coarse or Fine.
•• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage
burn-in or defective pixels.
-- Activate power-saving mode or a dynamic screen saver if you will not be using the product for
an extended period of time.
Gate
TFT
Pixel Electrode (ITO)
Storage
Capaccitor (Cs)
Data Bus-Line
Prevention of Afterimage Burn-in
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers
to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period
of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that
control the liquid crystals.
Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner.
When this occurs, a previous image can remain on the screen when the pattern changes. To prevent this,
the accumulated voltage difference should be reduced.
――Afterimage burn-in should not occur when an LCD panel is operating in proper conditions.
171
Preventing afterimage burn-in
――The best way to protect the product from afterimage burn-in is switching the power off or setting the
PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending
on instruction guide.
•• Powering Off, Screen Saver and Power Saving Mode
-- Power off the product for 2 hours after using it for 12 hours.
-- Go to Display Properties > Power Supply on your PC and set the product to power off as
required.
-- Using a screen saver is recommended.
It is best to use a single-colour or moving-image screen saver.
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
•• Regular colour Change
-- Use 2 colours
Switch between 2 colours every 30 minutes as shown above.
Type 1
•• Regular Text colour Change
-- Use bright colours of similar brightness.
Interval: Change text colour and background colour every 30 minutes
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
-- Move and change text every 30 minutes as shown below.
Type 2
FLIGHT
TIME
FLIGHT
TIME
OZ348
20:30
OZ348
20:30
UA102
21:10
UA102
21:10
•• Avoid combinations of a text colour and background colour of contrasting brightness.
(Brightness: refers to the lightness or darkness of a colour which varies depending on the amount of
light emitted.)
――Avoid using grey as it may contribute to afterimage burn-in.
――Avoid using colours of contrasting brightness (black and white; grey).
FLIGHT : TIME
FLIGHT : TIME
OZ348 : 20:30
OZ348 : 20:30
FLIGHT
: TIME
OZ348
: 20:30
[ Step 1 ]
[ Step 2 ]
FLIGHT
: TIME
OZ348
: 20:30
[ Step 3 ]
-- Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
172
Licence
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
This DivX CertifiedⓇ device has passed rigorous testing to ensure it plays
DivXⓇ video.
To play purchased DivX movies, first register your device at vod.divx.com. Find
your registration code in the DivX VOD section of your device setup menu.
Ⓡ
Ⓡ
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380,
5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723,
7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and
the Symbol together are registered trademarks & DTS Premium Sound is a
trademark of DTS, Inc. ⓒ2012 DTS, Inc. All Rights Reserved.
Manufactured under a license from U.S. Patent No’s: 6,285,767, 8,027,477,
5,319,713, 5,333,201, 5,638,452, 5,771,295, 5,970,152, 5,912,976, 7,200,236,
7,492,907, 8,050,434, 7,720,240, 7,031,474, 7,907,736 and 7,764,802. DTS, the
Symbol, and DTS and the Symbol together are registered trademarks & DTS
Studio Sound is a trademark of DTS, Inc. ⓒ2012 DTS, Inc. All Rights Reserved.
DivX CertifiedⓇ to play DivXⓇ video up to HD 1080p, including premium
content.
DivXⓇ, DivX CertifiedⓇ and associated logos are trademarks of DivX, LLC and
are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274.
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
Open Source Licence Notice is written only English.
For information on the Open Source Licence Notice, contact the Samsung Customer Centre or send
email to oss.request@samsung.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
173
Terminology
480i / 480p / 720p / 1080i /
1080p____ Each of the scanning
rates above refers to the number of
effective scanning lines that decides
the screen resolution. The scanning
rate may be indicated in i (interlaced)
or p (progressive), depending on the
scanning method.
- Scanning
Scanning refers to a process of sending
pixels that form an image progressively.
A larger number of pixels will deliver a
clearer and more vivid picture.
- Progressive
In progressive scan mode, all lines
of pixels are scanned one by one
(progressively) on the screen.
- Interlaced
In interlaced scan mode, every other
line of pixels is scanned from top to
bottom first and then the remaining
lines of pixels (that were not scanned)
are scanned.
Non-interlace Mode and Interlace
Mode____ Non-interlace mode
(progressive scan) displays a horizontal
line from the top to the bottom of a
screen progressively. Interlace mode
displays the odd number lines first
and the even number lines next. Noninterlace mode is mainly used in
monitors as it produces screen clarity
and interlace mode is mainly used in
TVs.
Dot Pitch____ The screen consist of
red, green and blue dots. A shorter
distance between the dots produces a
higher resolution. Dot pitch refers to the
distance between the shortest distance
between dots of the same colour. Dot
pitch is measured in millimeters.
Vertical Frequency____ The product
displays a single image many times
per second (like a fluorescent light that
flickers) to display an image for a viewer
to see. The rate of a single image being
displayed repeatedly per second is
called vertical frequency or refresh rate.
Vertical frequency is measured in Hz.
E.g. 60Hz refers to a single image being
displayed 60 times in one second.
Horizontal Frequency____ The time
required to scan a single line from the
left to the right side of the screen is
called a horizontal cycle. The reciprocal
number of a horizontal cycle is called
horizontal frequency. Horizontal
frequency is measured in kHz.
Source____ Input source refers to a
video source device connected to the
product such as a camcorder or video
or DVD player.
Plug & Play____ Plug & Play is a
function that allows the automatic
exchange of information between a
monitor and PC to produce an optimum
display environment. The product uses
VESA DDC (international standard) to
execute Plug & Play.
Resolution____ Resolution is the
number of horizontal dots (pixels) and
vertical dots (pixels) that form a screen.
It represents the level of display detail.
A higher resolution enables more
data to be displayed on the screen
and is useful to perform multiple tasks
simultaneously.
E.g. A resolution of 1920 X 1080 consists
of 1,920 horizontal pixels (horizontal
resolution) and 1,080 vertical pixels
(vertical resolution).
DVD (Digital Versatile Disc)____ DVD
refers to a CD-sized mass storage disk
where you can save multimedia (audio,
video or game) applications using
MPEG-2 video compression technology.
HDMI (High Definition Multimedia
Interface)____ It is an interface that
can be connected to a digital audio
source as well as a high-definition video
source by using a single cable without
compression.
Multiple Display Control (MDC)____
MDC (Multiple Display Control) is an
application that allows multiple display
devices to be controlled simultaneously
using a PC. Communication between
a PC and monitor takes place using
RS232C (serial data transmission) and
RJ45 (LAN) cables.
174
Download PDF