Samsung | ED32C | Samsung SMART Signage ED32C LED, B Benutzerhandbuch

LFD DISPLAY
User Manual
ED32C ED40C ED46C ED55C
The color and the appearance may differ depending on the
product, and the specifications are subject to change without
prior notice to improve the performance.
Table of contents
Before Using the Product
Installing the Wall Mount Kit
Wall Mount Kit Specifications (VESA)
Copyright5
Safety Precautions
6
Symbols6
Cleaning6
Storage7
Electricity and Safety
7
Installation8
Operation10
Preparations
Checking the Contents
13
Removing the Packaging (for ED32C, ED40C and
ED46C models only)
13
Removing the Packaging
(for ED55C models only)
14
Checking the Components
15
Parts16
Reverse Side
16
Anti-theft Lock
17
Remote Control
18
Before Installing the Product
(Installation Guide)
21
Tilting Angle and Rotation
21
Ventilation21
Dimensions22
Installing the Wall Mount
23
23
24
Remote Control (RS232C)
25
Cable Connection
25
Connection27
Control Codes
28
Connecting and Using a Source
Device
Before Connecting
Pre-connection Checkpoints
37
37
Connecting to a PC
Connection using the D-SUB cable
(Analog type)
Connection Using an HDMI-DVI Cable
Connection Using an HDMI Cable
Changing the Resolution
Changing the Resolution on Windows XP
Changing the Resolution on Windows Vista
Changing the Resolution on Windows 7
Changing the Resolution on Windows 8
38
Connecting to a Video Device
Connection Using an HDMI-DVI Cable
Connection Using an HDMI Cable
42
42
43
Connecting to an Audio System
44
38
39
39
40
40
40
41
41
Using MDC
Configuring Settings for Multi Control46
Configuring settings for Multi Control46
MDC Program Installation/Uninstallation 47
Installation47
Uninstallation47
What is MDC?
48
Connecting to MDC
48
Connection Management
49
User Login50
Auto Set ID51
Cloning52
Command Retry
53
Getting Started with MDC
54
Main Screen Layout
55
Menus55
Screen Adjustment
57
Advanced features
60
Sound Adjustment
62
System Setup
62
Tool Settings
71
Other Functions
74
Group Management
75
Schedule Management
77
Troubleshooting Guide
79
Changing the Input source
45
Source45
2
Table of contents
Screen Adjustment
Picture Mode81
If the input source is PC, HDMI(PC)
81
If the input source is HDMI(AV)
81
Backlight / Contrast / Brightness / Sharpness /
Color / Tint (G/R)82
Picture Size83
Picture Size83
Position84
Resolution Select84
Auto Adjustment85
Picture Off92
Reset Picture92
Sound Adjustment
Sound Mode93
Sound Effect94
Speaker Settings95
Reset Sound95
PC Screen Adjustment85
Sleep Timer99
On Timer100
Off Timer101
Holiday Management101
Eco Solution102
Energy Saving102
Eco Sensor102
Auto Power Off102
Screen Burn Protection103
Pixel Shift103
Timer104
Immediate Display105
Side Gray105
Ticker106
PIP86
Applications
Advanced Settings87
Dynamic Contrast87
Black Tone87
Flesh Tone87
RGB Only Mode87
Color Space87
White Balance88
Gamma88
Motion Lighting88
Color Tone90
Color Temp.90
Digital Clean View90
MPEG Noise Filter90
HDMI Black Level91
Film Mode91
Dynamic Backlight91
Source List96
Refresh96
Edit Name96
Information96
System
Menu Language97
Multi Control98
Configuring settings for Multi Control98
Time99
Clock Set99
Video Wall107
Video Wall107
Format107
Horizontal107
Vertical108
Screen Position108
Source AutoSwitch Settings109
Source AutoSwitch109
Primary Source Recovery109
Primary Source109
Secondary Source109
General110
Max. Power Saving110
Game Mode110
Auto Power110
3
Table of contents
Safety Lock110
Button Lock111
Standby Control111
Lamp Schedule111
OSD Display112
Power On Adjustment112
Temperature Control112
Testing the Product
Checking the Resolution and Frequency
Check the followings.
122
122
123
Q & A
126
Change PIN113
Specifications
Anynet+ (HDMI-CEC)114
Anynet+ (HDMI-CEC)114
Auto Turn Off115
Troubleshooting for Anynet+
116
General128
Prevention of Afterimage Burn-in
145
License147
Terminology148
PowerSaver130
Preset Timing Modes
131
Magic Clone118
Reset System118
Reset All119
Appendix
Contact SAMSUNG WORLD WIDE
Support
Software Update120
By USB120
Contact Samsung121
Troubleshooting Guide
Requirements Before Contacting Samsung
Customer Service Center
122
133
Responsibility for the Pay Service (Cost to
Customers)142
Not a product defect
142
A Product damage caused by customer's fault 142
Others142
Correct Disposal
143
Correct Disposal of This Product (Waste Electrical &
Electronic Equipment)
143
Correct disposal of batteries in this product
143
Optimum Picture Quality and Afterimage Burnin Prevention
144
Optimum Picture Quality
144
4
Chapter 01
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2013 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
•• An administration fee may be charged if either
-- (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
-- (b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
•• The amount of such administration charge will be advised to you before any work or home visit is carried out.
5
Safety Precautions
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Caution
――Take the following steps when cleaning.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
――Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
This symbol indicates that high voltage is present inside.
3
It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.
•• Do not use detergents that contain alcohol, solvent or
surface-active agents.
!
•• Do not spray water or detergent directly on the product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Wipe the product with a clean, soft and dry cloth.
4
Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the product.
Caution
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
5
Connect the power cord to the product when cleaning is finished.
6
Power on the product and computer.
Instructions marked by this symbol must be followed.
6
Storage
Connect the power plug to a grounded power socket (type 1 insulated
devices only).
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
――Contact Customer Service Center if the inside of the product needs cleaning (service fee will be
•• An electric shock or injury may result.
!
Do not bend or pull the power cord with force. Be careful not to leave the
power cord under a heavy object.
charged).
Electricity and Safety
•• Damage to the cord may result in a fire or electric shock.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Do not place the power cord or product near heat sources.
•• A fire or electric shock may result.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•• An electric shock or fire may result.
Clean any dust around the pins of the power plug or the power socket with
a dry cloth.
•• A fire may result.
Do not use multiple products with a single power socket.
•• Overheated power sockets may cause a fire.
!
Do not touch the power plug with wet hands. Otherwise, an electric shock
may result.
Insert the power plug all the way in so it is not loose.
•• An unsecure connection may cause a fire.
!
7
Installation
Caution
Do not disconnect the power cord while the product is being used.
•• The product may become damaged by an electric shock.
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•• A fire may result.
Only use the power cord provided with your product by Samsung. Do not
use the power cord with other products.
•• A fire or electric shock may result.
Have a technician install the wall-mount hanger.
!
•• Installation by an unqualified person can result in an injury.
•• Only use approved cabinets.
Keep the power socket where the power cord is connected unobstructed.
•• The power cord must be disconnected to cut off power to the product
when an issue occurs.
!
!
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
•• Note that the product is not completely powered down by using only
the power button on the remote.
•• An increased internal temperature may cause a fire.
Hold the plug when disconnecting the power cord from the power socket.
•• An electric shock or fire may result.
Install the product at least 10cm away from the wall to allow ventilation.
•• An increased internal temperature may cause a fire.
!
!
Keep the plastic packaging out of the reach of children.
•• Children may suffocate.
!
8
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)
Caution
•• The product may fall and become damaged and/or cause an injury.
Do not drop the product while moving.
•• Using the product in an area with excess vibration may damage the
product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture
(water drips, etc.), oil, or smoke.
•• Product failure or personal injury may result.
!
Do not set down the product on its front.
•• A fire or electric shock may result.
•• The screen may become damaged.
!
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•• The product lifespan may be reduced or a fire may result.
•• The product may fall and become damaged and/or cause an injury.
•• Install the product only on cabinets or shelves of the right size.
Do not install the product within the reach of young children.
•• The product may fall and injure children.
Set down the product gently.
•• As the front is heavy, install the product on a flat and stable surface.
Edible oil, such as soybean oil, can damage or deform the product. Do not
install the product in a kitchen or near a kitchen counter.
•• Product failure or personal injury may result.
!
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport
or train station where the product should operate continuously for an
extended period of time) may seriously affect its performance.
•• Be sure to consult Samsung Customer Service Center if you want to
install the product at such a place.
9
Operation
Do not leave heavy objects or items that children like (toys, sweets, etc.) on
top of the product.
•• The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.
Warning
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
During a lightning or thunderstorm, power off the product and remove the
power cable.
•• A fire or electric shock may result.
•• A fire or electric shock may result.
•• Contact Samsung Customer Service Center for repairs.
!
Before moving the product, turn off the power switch and disconnect the
power cable and all other connected cables.
Do not drop objects on the product or apply impact.
•• A fire or electric shock may result.
•• Damage to the cord may result in a fire or electric shock.
!
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Center.
Do not move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged
cable.
•• An electric shock or fire may result.
!
Do not let children hang from the product or climb on top of it.
If a gas leakage is found, do not touch the product or power plug. Also,
ventilate the area immediately.
•• Children may become injured or seriously harmed.
•• Sparks can cause an explosion or fire.
!
If the product is dropped or the outer case is damaged, turn off the power
switch and disconnect the power cord. Then contact Samsung Customer
Service Center.
•• Continued use can result in a fire or electric shock.
GAS
Do not lift or move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged
cable.
10
Do not use or keep combustible spray or an inflammable substance near
the product.
Caution
•• An explosion or fire may result.
Leaving the screen fixed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.
!
Ensure the vents are not blocked by tablecloths or curtains.
•• Activate power-saving mode or a moving-picture screen saver if you
will not be using the product for an extended period of time.
!
•• An increased internal temperature may cause a fire.
-_100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
•• Dust accumulation combined with heat can cause a fire, electric shock
or electric leakage.
!
Use the product at the recommended resolution and frequency.
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Center.
•• Product failure, an electric shock or fire may result.
Disconnect the power cord from the power socket if you do not plan on
using the product for an extended period of time (vacation, etc).
•• Your eyesight may deteriorate.
!
Do not hold the product upside-down or move it by holding the stand.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
•• The product may fall and become damaged or cause an injury.
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Center.
•• Product failure, an electric shock or fire may result.
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
!
Do not use humidifiers or stoves around the product.
•• A fire or electric shock may result.
11
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Be careful that children do not place the battery in their mouths when
removed from the remote control. Place the battery in a location that
children or infants cannot reach.
•• Eye fatigue will be relieved.
•• If children have had the battery in their mouths, consult your doctor
immediately.
!
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
When replacing the battery, insert it with the right polarity (+, -).
Store small accessories out of the reach of children.
Use only the specified standardized batteries, and do not use a new battery
and a used battery at the same time.
•• Otherwise, the battery may become damaged or it may cause fire,
personal injury or damage due to leakage of the internal liquid.
•• Otherwise, the batteries may be damaged or cause fire, personal injury
or damage due to a leakage of the internal liquid.
!
!
Exercise caution when adjusting the product angle or stand height.
The batteries (and rechargeable batteries) are not ordinary refuse and must
be returned for recycling purposes. The customer is responsible for returning
the used or rechargeable batteries for recycling.
•• Your hand or finger may get stuck and injured.
!
•• Tilting the product at an excessive angle may cause the product to fall
and an injury may result.
Do not place heavy objects on the product.
!
•• The customer can return used or rechargeable batteries to a nearby
public recycling center or to a store selling the same type of the
battery or rechargeable battery.
•• Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
•• Having the sound too loud may damage your hearing.
12
Chapter 02
Preparations
Checking the Contents
2
Remove the styrofoam from the product.
3
Check the product and remove the styrofoam and plastic bag.
4
Store the box in a dry area so that it can be used when moving the product in the future.
Removing the Packaging (for ED32C, ED40C and ED46C
models only)
――This image is for reference only.
1
Open the packaging box. Be careful not to damage the product when you open the packaging
with a sharp instrument.
13
Removing the Packaging(for ED55C models only)
3
Check the components and remove the styrofoam and plastic bag.
――The appearance of actual components may differ from the image shown.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
1
Remove the black locking device at the bottom of the box.
1
2
3
4
2
Store the box in a dry area so that it can be used when moving the product in the future.
Using the grooves in the box, lift and remove the top of the box.
14
Checking the Components
-- Contact the vendor where you
purchased the product if any
components are missing.
Components
――Components may differ in different locations.
-- The appearance of the components and
items sold separately may differ from the
image shown.
Quick setup guide
Warranty card
D-SUB cable (P.38)
Power cord
(Not available in some
locations)
-
+
-
-- A stand is not provided with the product.
To install a stand, you can purchase one
separately.
+
Remote Control (P.18)
Batteries (P.19)
(AA59-00714A)
(Not available in some
locations)
Items sold separately
Wall-mount Kit
HDMI cable (P.39)
HDMI-DVI cable (P.39)
15
Parts
Port
Reverse Side
Description
HDMI IN
Connects to a source device using an HDMI cable.
SERVICE (5V 0.5A)
This port is used to upgrade the software.
RGB IN
Connects to a source device using a D-SUB cable.
AUDIO OUT
Connects to the audio of a source device.
RGB / HDMI AUDIO IN
Receives sound from a PC via an audio cable.
RS232C IN
Connects to MDC using an RS232C-stereo adapter.
RS232C OUT
Remote Sensor
To control the remote control in front of the product, lower the remote control
sensor in the direction of the arrow.
Remote Sensor
POWER
16
Anti-theft Lock
――An anti-theft lock allows you to use the product securely even in public places.
――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
To lock an anti-theft locking device:
――Stand: Sold separately
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
-- An anti-theft locking device can be purchased separately.
-- Refer to the user guide provided with your anti-theft locking device for details.
-- Anti-theft locking devices can be purchased at electronics retailers or online.
17
Remote Control
――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
OFF
Power on the product.
.QZ
ABC
DEF
GHI
JKL
MNO
PRS
TUV
WXY
DEL-/--
SYMBOL
MUTE
1
4
7
2
5
8
0
3
6
VOL
MagicInfo
Lite
SOURCE
Enter the password in the OSD menu.
-- Remote control button functions may
differ for different products.
9
Mute the sound.
Unmuting the sound: Press MUTE again or press
the volume control (+ VOL -) button.
CONTENT
(HOME)
Adjust the volume.
Power off the product.
CH
Select a connected source device.
MENU
BLANK
Display or hide the onscreen display menu, or
return to the previous menu.
18
Quickly select frequently used functions.
TOOLS
INFO
Display information on the screen.
Move to the upper, lower, left or right menu, or
adjust an option's setting.
Confirm a menu selection.
Return to the previous menu.
RETURN
EXIT
PC
DVI
HDMI
DP
A
B
C
D
MAGICINFO
3D
LOCK
Exit the current menu.
Manually select a connected input source from
PC, HDMI.
It sets safe lock function.
-- Remote control button functions may
differ for different products.
To place batteries in the remote control
19
Adjusting the OSD with the Remote Control
Description
1
Open the OSD menu.
2
Select from Picture, Sound, Applications, System or
Support in the displayed OSD menu screen.
3
Change settings as desired.
4
Finish setting.
7m ~ 10m
Buttons
Remote Control Reception Range
30˚
30˚
Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the left
and right.
――Store used batteries out of reach of children and recycle.
――Do not use a new and used battery together. Replace both batteries at the same time.
――Remove batteries when the remote control is not to be used for an extended period of time.
5
Close the onscreen display (OSD) menu.
20
Before Installing the Product
(Installation Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
•• Ensure that an authorized installation company installs the wall mount.
•• Otherwise, it may fall and cause personal injury.
•• Make sure to install the specified wall mount.
15 ˚
Tilting Angle and Rotation
――Contact Samsung Customer Service Center for further details.
•• The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
•• To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35 C
A
•• When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface
for ventilation and ensure that the ambient A temperature is kept below 35 C.
B
Figure 1.1 Side view
21
Figure 1.3 Side view
Installation on an Indented Wall
――Contact Samsung Customer Service Center for further details.
B
D
D
Plane view
A Minimum 40 mm
B Minimum 70 mm
A
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35 C
――When installing the product on an indented wall, allow at least the space specified above between the product and wall for
ventilation and ensure that the ambient temperature is kept below 35 C.
C
E
Figure 1.2 Side view
Dimensions
Unit: mm (inches)
Model name
5
1
2
4
3
1
1 2
23
34
45
ED32C
736.0 (29.0)
703.4 (27.7)
397.8 (15.7)
434.5 (17.1)
93.7 (3.7)
ED40C
925.4 (36.4)
890.6 (35.1)
503.2 (19.8)
541.0 (21.3)
93.6 (3.7)
ED46C
1057.7 (41.6)
1023.0 (40.3)
577.6 (22.7)
615.8 (24.2)
94.8 (3.7)
ED55C
1247.7 (49.1)
1213.6 (47.8)
684.4 (26.9)
722.9 (28.5)
94.8 (3.7)
――All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors.
22
Installing the Wall Mount
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
wall mount on your own.
1
23
Wall Mount Kit Specifications (VESA)
――Install your wall mount on a solid wall perpendicular to the floor. Before
attaching the wall mount to surfaces other than plaster board, please contact
your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe
personal injury.
•• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
•• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
•• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
•• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
•• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
•• Do not mount the product at more than a 15 degree tilt.
•• Always have two people mount the product on a wall.
•• Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
Model name
ED32C
VESA screw hole
specs (A * B) in
millimeters
Standard Screw
200 x 200 (7.9 x 7.9)
M6, L29
400 x 400 (15.7 x 15.7)
M8, L32
Quantity
4EA
ED40C
ED46C
ED55C
――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
24
Remote Control (RS232C)
•• Pin assignment
1 2 3 4 5
Cable Connection
RS232C Cable
Interface
RS232C (9 pins)
Pin
TxD (No.2), RxD (No.3), GND (No.5)
Bit rate
9600 bps
Data bits
8 bit
Parity
None
Stop bit
1 bit
Flow control
None
Maximum length
15 m (only shielded type)
6 7 8 9
Pin
Signal
1
Detect data carrier
2
Received data
3
Transmitted data
4
Prepare data terminal
5
Signal ground
6
Prepare data set
7
Send request
8
Clear to send
9
Ring indicator
25
•• RS232C cable
Connector: 9-Pin D-Sub to Stereo Cable
9
3
2
1
5
-P2-
6
-P1-
1
-P1Female
-P1-
-P2-
-P2-
Rx
2
-------->
3
Tx
STEREO
Tx
3
<--------
2
Rx
PLUG
Gnd
5
----------
5
Gnd
(3.5ø)
26
Connection
•• Connection 1
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
27
No.
Control Codes
Viewing control state (Get control command)
Header
Command
0xAA
Command type
ID
Data length
Command
0xAA
Command type
Command type
10
Video Wall On
0x84
0~1
11
Video Wall User Control
0x89
-
E.g. Power On & ID=0
Data length
Data
1
Value
Checksum
Command
No.
Value range
•• All communications take place in hexadecimals. The checksum is calculated by adding up all
values except the header. If a checksum adds up to be more than 2 digits as shown below
(11+FF+01+01=112), the first digit is removed.
0
ID
Command
Checksum
Controlling (Set control command)
Header
Command type
Command
Value range
1
Power control
0x11
0~1
2
Volume control
0x12
0~100
3
Input source control
0x14
-
4
Screen mode control
0x18
-
5
Screen size control
0x19
0~255
6
PIP on/off control
0x3C
0~1
7
Auto adjustment control (PC and
BNC only)
0x3D
0
8
Video wall mode control
0x5C
0~1
9
Safety Lock
0x5D
0~1
Header
Command
0xAA
0x11
Header
Command
0xAA
0x11
ID
ID
Data length
Data 1
1
"Power"
Data length
Data 1
1
1
Checksum
12
•• To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as
"0xFE" and transmit commands. Commands will be executed by each device but ACK will not
respond.
28
Power control
Volume control
•• Function
A product can be powered on and off using a PC.
•• Function
The volume of a product can be adjusted using a PC.
•• Viewing power state (Get Power ON / OFF Status)
•• Viewing volume state (Get Volume Status)
Header
Command
0xAA
0x11
ID
Data length
Checksum
0
•• Setting power ON/Off (Set Power ON / OFF)
Header
Command
0xAA
0x11
ID
Header
Command
0xAA
0x12
Data length
Data
1
"Power"
Checksum
Header
Command
0xAA
0x12
•• Ack
0: Power OFF
Header
Command
0xAA
0xFF
•• Ack
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x11
"Power"
Checksum
0xAA
0xFF
ID
ID
Data length
Data
1
"Volume"
Checksum
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x11
"ERR"
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x12
"Volume"
Checksum
•• Nak
•• Nak
Command
0
"Volume": Volume value code to be set on a product. (0-100)
"Power": Power code to be set on a product.
Header
Checksum
"Volume": Volume value code to be set on a product. (0-100)
1: Power ON
Command
Data length
•• Setting the volume (Set Volume)
"Power": Power code to be set on a product.
Header
ID
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x12
"ERR"
Checksum
"ERR" : A code showing what error has occurred.
"ERR" : A code showing what error has occurred.
29
Input source control
0x24
HDMI2_PC
•• Function
The input source of a product can be changed using a PC.
0x25
DisplayPort
――DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to
•• Viewing input source state (Get Input Source Status)
Header
Command
0xAA
0x14
ID
Data length
"Get" commands.
――This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports.
Checksum
――MagicInfo is only available with models that contain the MagicInfo function.
0
――RF(TV), DTV are only available with models that include a TV.
•• Setting the input source (Set Input Source)
Header
Command
0xAA
0x14
ID
•• Ack
Data length
Data
1
"Input Source"
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x14
"Input
Source"
"Input Source": An input source code to be set on a product.
0x14
PC
0x18
DVI
0x0C
Input source
0x08
Component
0x20
MagicInfo
0x1F
DVI_video
0x30
RF(TV)
0x40
DTV
0x21
HDMI1
0x22
HDMI1_PC
0x23
HDMI2
Checksum
"Input Source": An input source code to be set on a product.
•• Nak
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x14
"ERR"
Checksum
"ERR" : A code showing what error has occurred.
30
Screen mode control
•• Nak
•• Function
The screen mode of a product can be changed using a PC.
Screen mode cannot be controlled when the Video Wall function is enabled.
――This control can only be used on models that include a TV.
Command
0xAA
0x18
ID
Data length
0xAA
ID
0x18
16 : 9
0x04
Zoom
0x31
Wide Zoom
0x0B
4:3
Ack/Nak
r-CMD
Val1
3
'N'
0x18
"ERR"
Checksum
•• Viewing the screen size (Get Screen Size Status)
Data
length
Data
Checksum
1
"Screen Mode"
Header
Command
0xAA
0x19
ID
Data length
Checksum
0
•• Ack
"Screen Mode": A code that sets the product status
0x01
0xFF
Data length
•• Function
The screen size of a product can be changed using a PC.
0
Command
0xAA
ID
Screen size control
Checksum
•• Setting the picture size (Set Picture Size)
Header
Command
"ERR": A code showing what error has occurred
•• Viewing screen status (Get Screen Mode Status)
Header
Header
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x19
"Screen Size"
Checksum
"Screen Size": product screen size (range: 0 – 255, unit: inch)
•• Nak
Header
Command
0xAA
0xFF
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x18
"Screen
Mode"
Checksum
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x19
"ERR"
Checksum
"ERR": A code showing what error has occurred
"Screen Mode": A code that sets the product status
31
PIP On/Off control
Auto adjustment control (PC and BNC only)
•• Function
The PIP mode of a product can be turned on or off using a PC.
•• Function
Automatically adjust the PC system screen using a PC.
――Only available on models that have the PIP function.
――The mode cannot be controlled if Video Wall is set to On.
•• Viewing auto adjustment state (Get Auto Adjustment Status)
None
――This function is not available in MagicInfo.
•• Setting auto adjustment (Set Auto Adjustment)
•• Viewing PIP on/off state (Get the PIP ON / OFF Status)
Header
Command
0xAA
0x3C
ID
Data length
Checksum
Command
0xAA
0x3C
Command
0xAA
0x3D
ID
Data length
Data
1
"Auto
Adjustment"
0
ID
Checksum
"Auto Adjustment" : 0x00 (at all times)
•• Setting PIP on/off (Set the PIP ON / OFF)
Header
Header
Data length
Data
1
"PIP"
•• Ack
Checksum
"PIP": A code used to turn the PIP mode of a product on or off
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3D
"Auto
Adjustment"
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3D
"ERR"
1: PIP ON
0: PIP OFF
Checksum
•• Nak
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3C
"PIP"
Checksum
Header
Command
0xAA
0xFF
ID
Checksum
"ERR": A code showing what error has occurred
"PIP": A code used to turn the PIP mode of a product on or off
•• Nak
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3C
"PIP"
Checksum
"ERR": A code showing what error has occurred
32
Video Wall Mode Control
Safety Lock
•• Function
Video Wall mode can be activated on a product using a PC.
•• Function
PC can be used to turn the Safety Lock function on or off on a product.
This control is only available on a product whose Video Wall is enabled.
This control is available regardless of whether or not the power is turned on.
•• Viewing video wall mode (Get Video Wall Mode)
Header
Command
0xAA
0x5C
ID
Data length
•• Viewing the safety lock state (Get Safety Lock Status)
Checksum
0
•• Setting the video wall (Set Video Wall Mode)
Header
Command
0xAA
0x5C
ID
Header
Command
0xAA
0x5D
ID
Data length
Checksum
0
•• Enabling or disabling safety lock (Set Safety Lock Enable / Disable)
Data length
Data
Checksum
1
"Video Wall Mode"
Header
Command
0xAA
0x5D
ID
Data length
Data
1
"Safety Lock"
"Video Wall Mode": A code used to activate Video Wall mode on a product
"Safety Lock": Safety lock code to be set on a product
1: Full
1: ON
0: Natural
0: OFF
Checksum
•• Ack
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"Video Wall
Mode"
Checksum
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5D
"Safety Lock"
Checksum
"Safety Lock": Safety lock code to be set on a product
"Video Wall Mode": A code used to activate Video Wall mode on a product
•• Nak
•• Nak
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"ERR"
Header
Command
0xAA
0xFF
Checksum
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x5D
"ERR"
Checksum
"ERR": A code showing what error has occurred
"ERR": A code showing what error has occurred
33
Video Wall On
•• Nak
•• Function
Turn Video Wall on or off on the product from your computer.
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x84
ERR
Checksum
•• Get Video Wall On/Off Status
Header
Command
0xAA
0x84
ID
Data length
"ERR": A code showing what error has occurred
Checksum
Video Wall User Control
0
•• Function
Turn the Video Wall function on or off on the product from your computer.
•• Set Video Wall On/Off
Header
Command
0xAA
0x84
ID
Data length
Data
Checksum
1
V.Wall_On
•• Get Video Wall Status
•• V.Wall_On: Video Wall code to be assigned to the product
1: Video Wall ON
•• Ack
Command
0xAA
0xFF
Command
0xAA
0x89
ID
Data length
Checksum
0
•• Set Video Wall
0: Video Wall OFF
Header
Header
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x84
V.Wall_
On
Checksum
Header
Command
0xAA
0x89
ID
Data length
Val1
Val2
2
Wall_Div
Wall_SNo
Checksum
Wall_Div: Video Wall Divider code assigned to the product
V.Wall_On : Same as above
34
10x10 Video Wall Model
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Off
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
1
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
0x19
0x1A
0x1B
0x1C
0x1D
0x1E
0x1F
2
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2A
0x2B
0x2C
0x2D
0x2E
0x2F
3
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x38
0x39
0x3A
0x3B
0x3C
0x3D
0x3E
0x3F
4
0x41
0x42
0x43
0x44
0x45
0x46
0x47
0x48
0x49
0x4A
0x4B
0x4C
0x4D
0x4E
0x4F
5
0x51
0x52
0x53
0x54
0x55
0x56
0x57
0x58
0x59
0x5A
0x5B
0x5C
0x5D
0x5E
0x5F
6
0x61
0x62
0x63
0x64
0x65
0x66
0x67
0x68
0x69
0x6A
0x6B
0x6C
0x6D
0x6E
0x6F
7
0x71
0x72
0x73
0x74
0x75
0x76
0x77
0x78
0x79
0x7A
0x7B
0x7C
0x7D
0x7E
N/A
8
0x81
0x82
0x83
0x84
0x85
0x86
0x87
0x88
0x89
0x8A
0x8B
0x8C
N/A
N/A
N/A
9
0x91
0x92
0x93
0x94
0x95
0x96
0x97
0x98
0x99
0x9A
0x9B
N/A
N/A
N/A
N/A
10
0xA1
0xA2
0xA3
0xA4
0xA5
0xA6
0xA7
0xA8
0xA9
0xAA
N/A
N/A
N/A
N/A
N/A
11
0xB1
0xB2
0xB3
0xB4
0xB5
0xB6
0xB7
0xB8
0xB9
N/A
N/A
N/A
N/A
N/A
N/A
12
0xC1
0xC2
0xC3
0xC4
0xC5
0xC6
0xC7
0xC8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
13
0xD1
0xD2
0xD3
0xD4
0xD5
0xD6
0xD7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
14
0xE1
0xE2
0xE3
0xE4
0xE5
0xE6
0xE7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
15
0xF1
0xF2
0xF3
0xF4
0xF5
0xF6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
35
10x10 Video Wall Model : ( 1 ~ 100)
Set Number
Data
1
0x01
2
0x02
...
...
99
0x63
100
0x64
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
Val2
4
'A'
0x89
Wall_Div
Wall_SNo
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x89
ERR
Checksum
•• Nak
Header
Command
0xAA
0xFF
ID
Checksum
"ERR": A code showing what error has occurred
36
Chapter 03
Connecting and Using a Source Device
Before Connecting
Check the following before you connect this product with other devices. Devices that can be connected to this product
include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players.
Pre-connection Checkpoints
――Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to
device.
――Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
――Check the types of ports at the back of the product you want to connect.
37
Connecting to a PC
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
――Connecting parts may differ in different products.
Connection using the D-SUB cable (Analog
type)
RGB IN
RGB / HDMI AUDIO IN
38
Connection Using an HDMI-DVI Cable
――When you connect a PC to the product using an HDMI-DVI cable, set Edit
Name to DVI PC to access video and audio content stored on the PC.
HDMI IN
RGB / HDMI AUDIO IN
Connection Using an HDMI Cable
HDMI IN
39
Changing the Resolution
――Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality.
――The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel
Display
Settings, and change the resolution.
Changing the Resolution on Windows Vista
Go to Control Panel
Personal Settings
Display Settings, and change the resolution.
40
Changing the Resolution on Windows 7
Go to Control Panel
Display
Screen Resolution, and change the resolution.
Changing the Resolution on Windows 8
Go to Settings
Control Panel
Display
Screen Resolution, and change the resolution.
41
Connecting to a Video Device
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• You can connect a video device to the product using a cable.
――Connecting parts may differ in different products.
――Press the SOURCE button on the remote control to change the source.
Connection Using an HDMI-DVI Cable
――Audio will not be enabled if the product is connected to a video device using
an HDMI-DVI cable. To resolve this, additionally connect an audio cable to
the audio ports on the product and video device. When you connect a video
device to the product using an HDMI-DVI cable, set Edit Name to DVI Devices
to access video and audio content stored on the video device.
――Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and
576p.
HDMI IN
42
Connection Using an HDMI Cable
Using an HDMI cable or HDMI to DVI Cable (up to
1080p)
•• For better picture and audio quality, connect to a digital device using an
HDMI cable.
•• An HDMI cable supports digital video and audio signals, and does not
require an audio cable.
-- To connect the product to a digital device that does not support HDMI
output, use an HDMI-DVI and audio cables.
HDMI IN
•• The picture may not display normally (if at all) or the audio may not work if
an external device that uses an older version of HDMI mode is connected to
the product. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
•• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not
display or a connection error may occur.
•• A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
43
Connecting to an Audio System
――Connecting parts may differ in different products.
RGB / HDMI AUDIO IN
44
Changing the Input source
Source
T
MENUm :
Applications
ENTER
Source allows you to select a variety of sources and change source device names.
Source
HDMI
PC
Source List
You can display the screen of a source device connected to the product. Select a source from source list to display the screen
of the selected source.
――The input source can also be changed by using the SOURCE button on the remote control.
PC
----
――The screen may not display correctly if an incorrect source is selected for the source device you want to convert to.
-- The displayed image may differ depending on the model.
45
Chapter 04
Using MDC
MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC.
Configuring Settings for Multi Control
MENU m :System
T
Multi Control
ENTER
Assign an individual ID to your product.
Configuring settings for Multi Control
•• ID Setup
Assign an ID to a set. (Range: 0~99)
Press
to select a number, and press
.
•• ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
Enter the number you want using the number buttons on the remote control.
46
MDC Program Installation/Uninstallation
Installation
MDC installation can be affected by the
graphics card, mother board and network
conditions.
If a software installation window is not
displayed on the main screen, install with
the MDC Unified execution file in the
MDC folder on the CD.
If the directory path is not specified, the
program will be installed in the default
directory path.
Select "Launch MDC Unified" and
click "Finish" to run the MDC program
immediately.
1
Insert the installation CD into the CD-ROM drive.
2
Click the MDC Unified installation program.
3
Select a language for installation. Next, click "OK".
4
When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click "Next".
5
In the "License Agreement" window displayed, select "I accept the terms in the license agreement" and click "Next".
6
In the displayed "Customer Information" window, fill out all the information fields and click "Next".
7
In the displayed "Destination Folder" window, select the directory path you want to install the program in and click "Next".
8
In the displayed "Ready to Install the Program" window, check the directory path to install the program in and click "Install".
9
Installation progress will be displayed.
10Click "Finish" in the displayed "InstallShield Wizard Complete" window.
11The MDC Unified shortcut icon will be created on the desktop after installation.
-- The MDC execution icon may not be
displayed depending on the PC system
or product specifications.
-- Press F5 if the execution icon is not
displayed.
Uninstallation
1
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2
Select MDC Unified from the list and click Change/Remove.
47
What is MDC?
Multiple display control "MDC" is an
application that allows you to easily
control multiple display devices
simultaneously using a PC.
Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
RS232C IN
Monitor 1
RS232C OUT
RS232C IN / OUT
RS232C IN
Monitor 2
RS232C OUT
Computer
48
Connection Management
Connection management includes the Connection list and Connection list modification options.
Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MAC, and Connection Type), connection status, Set ID
Range, and detected devices.
Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion. All the LFDs detected in a connection are displayed in the Device list,
where the user can make groups and send commands to detected devices.
Connection list modification options - Connection modification options includes Add, Edit, Delete, and Refresh.
49
User Login
Launching the program displays the user login window.
The initial login ID (Username: admin) and password (password: admin) are set to admin.
――After logging in for the first time, make sure to change the password to ensure security.
――To change the password, go to Home > User Settings.
After you are logged in, [User Login : admin] appears at the right bottom of the program.
To log in automatically when the program restarts, select the Auto Login checkbox in the User Login window.
50
Auto Set ID
Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection.
There can be a maximum of 100 LFDs in a connection.
The Set ID is assigned sequentially in the daisychain running from 1 to 99, and then finally to Set ID 0.
――ID for the last 100th LFD is set to 0.
51
Cloning
Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs.
You can select specific tab categories or all tab categories for cloning, using the copy setting option window.
――To delete the settings you have configured, click the Paste Settings button.
52
Command Retry
This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD.
The retry count value can be set using the MDC options window.
The retry count value must be between 1-10. The default value is 1.
53
Getting Started with MDC
1
1
To start the program, click Start
Programs
Samsung
MDC Unified.
The login window appears after the MDC program is launched.
Enter the user ID and password.
•• The default user ID and password are admin.
•• Make sure to change the password after the first login.
2
2
Click Add to add a display device.
SET ID Range: Select a range of the unique ID assigned to a monitor.
-- If the connection is established via RS232C, go to Serial and specify the COM Port.
-- If the connection is established via Ethernet, enter the IP that was entered for the display device.
54
Main Screen Layout
1
6
1 Menu Bar
Change the status of a display device or the properties of the program.
2 Device Category
View a list of connected display devices or device groups.
3 Schedule Category
View a list of schedules for display devices.
4 Set List
Select the display device you want to adjust.
2
5 Modify the Set List
Add, edit, regroup or delete sets.
3
6 Help Topics
Display help topics for the program.
5
4
Menus
You can power on or off a selected device or change the input source or volume of the device.
Home
Select an item and change the corresponding setting.
Choose display devices from the list of sets, and select the Home tab.
Power
•• On: Power on a selected display.
1
•• Off: Power off a selected display.
Input
2
3
•• Input Source : Change the input source.
-- Input sources available can vary depending on the Display Device Models.
-- The input source can be changed only for displays that are turned on.
•• Channel: Change the channel.
-- The TV channel can be changed by using the up/down arrow keys.
-- The channel can be changed only when the input source is TV.
-- Only registered channels can be selected.
-- Only applicable to models that support TVs.
55
――The volume can be changed or the sound can be muted only for displays that are turned on.
Volume
Volume
•• Adjust the volume of a selected display.
2
Alert
3
•• The volume can be adjusted using the slider bar in the range of 0 to 100.
Mute
•• Enable or disable Mute for a selected display.
Mute will automatically be disabled if Volume is adjusted when Mute is on.
Fault Device
•• This menu shows a list of display devices which have following errors - fan error, temperature error, brightness sensor
error, or lamp error.
•• Select a display device from the list. The Repair button will be enabled.
3
•• Click the Refresh button to refresh the error status of the display device. The recovered display device will disappear from
the Fault Device List.
Fault Device Alert
•• Display device in which error is detected will be reported by email.
•• Fill in all required fields. The Test and OK buttons will be enabled.
Ensure the Sender information and at least one Recipient are entered.
56
User Login
User Settings
•• Add, delete or edit login information.
Logout
•• Log out from the current user account as follows.
•• Click Logout. The message "Do you want to log admin out?" is displayed
•• Click Yes. The user login window appears.
•• If you do not want to log in, click Close. The program is closed.
――If you close the program using Logout, the login window will appear prompting you to enter user information even if
the Auto Login checkbox is selected.
Screen Adjustment
The screen settings (contrast, brightness, etc.) can be adjusted.
Custom
Select an item and change the corresponding screen setting.
Choose display devices from the list of sets, and select the Picture tab.
Picture Mode
•• Adjust the picture mode for the selected display device.
Contrast
•• Adjust the contrast for the selected display device.
Brightness
•• Adjust the brightness for the selected display device.
57
Color
Color
•• Adjust the colors for the selected display device.
Tint (G/R)
•• Adjust the tint for the selected display device.
Color Tone
•• Adjust the background color tone for the selected display device.
Color Temp.
-- Color and Tint (G/R) are not available if the input source is PC.
-- Color, Tint (G/R), Color Tone and Color Temp. are not available if both PC Source and Video
Source are selected.
Options
•• Adjust the color temperature for the selected display device.
――This option is enabled if Color Tone is set to Off.
HDMI Black Level
•• Adjust the HDMI Black Level for the selected display device.
Auto Motion Plus
This option is used to view dynamic images.
•• Off: Disable the Auto Motion Plus function.
•• Clear: Set the level of Auto Motion Plus to clear. This mode is suitable to display vivid images.
•• Standard: Set the level of Auto Motion Plus to standard.
•• Smooth: Set the level of Auto Motion Plus to smooth. This mode is suitable to display smooth images.
•• Custom: Customize the level of screen burn-in or flickering.
•• Demo: This function demonstrates the technology of Auto Motion Plus. The result when the mode is changed can be
previewed on the left side of the window.
――Auto Motion Plus may not be available depending on the product.
•• Detail: View detailed information about the selected display device.
Brightness Sensor
•• Enable or disable the Brightness Sensor for the selected display device.
•• The Brightness Sensor detects the ambient light intensity and automatically adjusts the screen brightness.
――Brightness Sensor may not be available depending on the product.
58
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
•• Off / Low / Medium / High / Auto
Smart LED
Controls the LED backlight to maximize picture clarity.
Cinema Black
In Movie mode, this feature dims the top and bottom areas of the video image to provide a more immersive viewing
experience.
•• Off: Turns off the Cinema Black feature.
•• On: Adjusts the dimming of the top and bottom areas of the screen according to the video.
Size
Picture Size
•• Adjust the screen size for the selected display device.
•• The Detail item will be disabled if Picture Size is set to a mode that does not support detailed configuration.
•• The -/+ buttons can be used to adjust Zoom.
•• The screen can be relocated using the up/down/left/right buttons.
Detail
•• You can view details of the selected screen size.
PC Screen Adjustment
•• Frequency adjustment or fine-tuning is available by using the -/+ buttons in Coarse or Fine.
•• To relocate the screen, click one of the four images below Position.
•• To automatically adjust the frequency, fine-tune or relocate the screen, click Auto Adjustment.
59
Advanced features
3D Mode
Select the 3D input format.
3D L/R Change
Swap the left and right pictures.
3D
2D
Displays the image for the left eye only.
3D Auto View
3D Control
If you set 3D Auto View to Message Notice, a pop up message window appears when the product receives a 3D signal.
3D Optimization
The overall adjustment of 3D effect.
3D Expert Pattern
View a 3D pattern.
3D Effect
Adjust 3D effects like perspective and depth for your preferred 3D viewing experience.
•• Auto: Automatically adjust the perspective and depth settings in accordance with the 3D input source.
•• Manual: Manually adjust the perspective and depth settings.
60
Advanced Settings
Dynamic Contrast
Adjust the screen contrast.
Gamma Control
Adjust the primary color intensity.
RGB Only Mode
Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.
Flesh Tone
Emphasize pink “Flesh Tone.”
Motion Lighting
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
LED Motion Plus
Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture.
Color Space
Adjusts the range and variety of color (the color space) available to create images.
•• Auto / Native / Custom
-- To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom.
White Balance
Adjust the colour temperature for a more natural picture.
•• R-Offset / G-Offset / B-Offset
Adjust each color (red, green, blue) darkness.
•• R-Gain / G-Gain / B-Gain
Adjust each color (red, green, blue) brightness.
•• Reset
Resets the White Balance to it’s default settings.
61
Sound Adjustment
You can change the sound settings.
Choose display devices from the list of sets, and select the Sound tab.
Bass
•• Adjust the bass for the selected display.
Treble
•• Adjust the treble for the selected display.
-- The Bass or Treble item will be disabled if the item is not supported by the selected set.
Balance(L/R)
•• Adjust the volume of the left and right speakers of the selected display device.
SRS TS XT
•• Enable or disable the SRS TS XT effect for the selected display device.
System Setup
Video Wall
Choose display devices from the list of sets, and select the System tab.
The Video Wall function can be used to display part of a whole picture or repeat the same picture on each of connected
multiple display devices.
――Video Wall is enabled only when devices are in the group.
Video Wall
•• Enable or disable Video Wall.
62
Format
H
•• Select the format to display the split screen.
•• Select the number of horizontal display devices.
•• A maximum of 15 displays can be arranged in a row.
――A maximum of 6 can be assigned to V if 15 is assigned to H.
V
•• Select the number of vertical display devices.
•• A maximum of 15 displays can be arranged in a row.
――A maximum of 6 can be assigned to H if 15 is assigned to V.
Screen Position
•• View the layout of displays (configured by the screen divider) or change the layout as required.
•• Screen Position and Preview are enabled when Video Wall is set to on.
•• Note that if multiple sets are selected, Preview is enabled only if the settings for H and V match the layout of the selected
sets.
Full
Natural
•• To change the Position, select a set and drag it to a new position.
――The range of screen divider settings may differ depending on the model.
PIP
PIP Size
•• View the PIP Size of the current display.
PIP Source
•• Select a PIP input source.
Sound Select
•• Select and enable the sound from either the primary screen or secondary screen.
Channel
-- Basic information required to adjust PIP will appear in the menu screen.
•• The channel can be changed if PIP Source is TV.
-- PIP will be disabled when Video Wall is On.
-- Note that Picture Size is disabled when PIP is On.
63
General
User Auto Color
•• Automatically adjust the screen colors.
――Available only in PC mode.
Auto Power
•• Set the product to automatically power on.
Standby Control
•• Set the standby mode to activate if an input source is not detected.
Fan & Temperature
Configure the settings required to detect the fan speed and internal temperature for the product's protection.
Fan Control
•• Select a method to configure the fan speed.
Fan Speed Setting
•• Configure the fan speed.
Temperature
•• Detect the internal temperature by specifying the range of temperature.
64
Security
Safety Lock
•• Lock the on-screen menus.
――To unlock the menus, set Safety Lock to Off.
Button Lock
•• Lock the buttons on the display device.
――To unlock the buttons, set Button Lock to Off.
OSD Display
Source OSD
•• Select whether to display a message when the Source is changed.
Not Optimum Mode OSD
•• Select whether to display a message when a non-compatible mode is selected.
No Signal OSD
•• Select whether to display a message when there is no input signal.
MDC OSD
•• Select whether to display a message when settings are changed by the MDC.
65
Time
Clock Set
Change the current time on the selected display device according to the time set on a PC.
If the time is not set on the display device, null values will be displayed.
Timer
On Timer
•• Repeat: Specify the period for which you want to repeat the selected Timer.
Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual
•• Holiday Apply: The Holiday Management settings can be applied to the Timer.
•• On Time: Set the time to power on the selected display device.
•• Volume: Specify the volume of the display device when it is powered on by On Time.
•• Source: Specify the input source of the display device when it is powered on by On Time.
Off Timer
•• Repeat: Specify the period for which you want to repeat the selected Timer.
Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual
•• Holiday Apply: The Holiday Management settings can be applied to the Timer.
•• Off Time: Set the time to power off the selected display device.
――The checkboxes to select days of the week below Repeat are enabled only if Manual is selected.
66
Holiday Management
Holiday Management allows you to prevent devices that are set to be powered on by the Timer from turning on at a
specified date.
――The Holiday Management function can be enabled or disabled in the Timer settings menu.
•• Add: You can specify holidays.
Click the Add button in the Holiday Management window.
•• Delete: Delete holidays. check the corresponding checkboxes and click this button.
•• List of holidays: View a list of holidays you have added.
Screen Burn Protection
Pixel Shift
Move the screen slightly at specified time intervals to prevent screen burn-in.
67
Screen Saver
This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time.
Timer: You can set the timer for Screen Saver.
•• Off
•• Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals (Period).
•• Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to
End Time).
•• Mode: Select a screen protective pattern to display.
•• Period (Hour): Specify the time interval to activate the Screen Saver function.
――The option is enabled when Repeat is selected for Timer.
•• Time (Sec): Specify the duration to keep the Screen Saver function on.
――The option is enabled when Repeat is selected for Timer.
•• Start Time: Set start time to display screen saver.
――The option is enabled when Interval is selected for Timer.
•• End Time: Set end time to display screen saver.
――The option is enabled when Interval is selected for Timer.
――Period (Hour) and Time (Sec) can be configured when Repeat is
selected.
――Start Time and End Time can be configured when Interval is selected.
68
Safety Screen
The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display
device for an extended period of time.
Lamp Control
Lamp Control is used to adjust the backlight to reduce power consumption.
Automatically adjust the backlight of the selected display device at a specified time.
If Manual Lamp Control is adjusted, Auto Lamp Control will automatically switch to Off.
Manually adjust the backlight for the selected display.
If Auto Lamp Control is adjusted, Manual Lamp Control will automatically switch to Off.
•• Ambient Light: Ambient Light detects ambient light intensity and automatically adjusts the screen brightness of all the
LFDs in the same serial chain.
69
Ticker
Input text while a video or image is displayed and display the text on the screen.
Ticker
Enable or disable Ticker.
•• Off / On
Message
Enter a message to display on the screen.
Timer
Set the Start Time and End Time to display a message (Message).
Position
Select an orientation to display a message (Message) from Horizontal and Vertical.
Motion
Specify the Direction and Speed to display a message (Message).
Font Options
Specify the message Size, Foreground Color, Foreground Opacity, Background Color and Background Opacity.
70
Tool Settings
•• Panel Control: Turn on or off the screen of a display device.
•• Remote Control: Enable or disable the remote control.
Security
Reset
•• Reset Picture: Reset the screen settings.
•• Reset Sound: Reset the sound settings.
•• Reset System: Reset the system settings.
•• Reset All: Reset the screen, sound and system settings at the same time.
71
Edit Column
Options
Configure the settings for the items that will be displayed on the list of displays.
•• Language: Select a language to use in the MDC program. After selecting a language, restart the MDC program to use the
selected language.
•• Command Retry Count: Specify the number of retry attempts when a command fails.
•• Error Status Interval: Specify the time interval to query the display device in order to check if "Fault Device" has
occurred.
•• Mail Alert Interval: Specify the time interval for email notifications in the event when "Fault Device" occurs.
Edit Column
Select the items you want to display in the list of sets.
72
Monitor Window
A window appears showing details for data transfer between the computer and display devices.
•• Filter
Information
View the program information.
73
Other Functions
Resizing a Window
Place the mouse pointer on a corner of the program window. An arrow will appear.
Move the arrow to customize the size of the program window.
74
Group Management
Create groups and manage the list of sets on a group basis.
――Duplicate group names cannot be used.
Creating Groups
1
Right-click and select Group
2
In the Edit Group window displayed, click Add on the same level or Add on the sub level.
Edit in the display device list section on the left side of the program window.
•• Add on the same level: Create a group on the same level as the selected group.
-- The Add on the same level button is enabled only if at least one group is created.
75
•• Add on the sub level: Create a sub-group under the selected group.
Deleting Groups
3
Enter the group name.
1
Select a group name, and click Edit.
2
In the Edit Group window displayed, click Delete.
3
Click Yes. The group will be deleted.
76
Renaming Groups
1
Select a group name, and click Edit.
2
In the Edit Group window displayed, click Rename.
3
If a cursor appears in the old group name, enter a new group name.
Rename
Schedule Management
Creating Schedules
Create and register a schedule on a group basis.
1
Click All Schedule List in the schedule section on the left side of the program window. The Add button will be enabled
in the middle.
77
2
Click the Add button. The Add Schedule window will appear.
3
Click Add below the Device Group item, and select the group you want to add a schedule to.
4
Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list
window.
-- Device Group: Select a group.
-- Date&Time
Instant Execution: Run the schedule immediately.
Timer: Set the date, time and interval to run the schedule.
-- Action: Select a function that will activate at the specified time and interval.
Schedule Modification
To modify a schedule, select the schedule and click Edit.
Deleting a Schedule
To delete a schedule, select the schedule and click Delete.
78
Troubleshooting Guide
-- This program may malfunction
sometimes due to a communication
problem between the PC and display
or electromagnetic waves emitted from
nearby electronic devices.
Issue
The display you want to control does not
appear on the system information chart.
Solution
1
Check the connection of the RS232C cable (check that the cable is properly connected to appropriate serial port).
2
Check that another display with a duplicate ID is not connected. Connecting displays with a duplicate ID can cause
the displays not to be shown due to data collision.
3
Check that the display ID is within the range of 0 and 99. (Change the ID using the Display menu.)
――For a display that supports the ID in a range of 0 to 99, the ID should be set between 0 and 99.
The display you want to control does not
appear on the other Control Info Grids.
Check that the display is powered on. (See the power status in the system information chart.)
The following message appears
repeatedly.
Check that the display you want to control is selected.
Displays power on or off at different
time from one another even though On
Time or Off Time is set.
Adjust the time on the PC to synchronize the time between the connected displays.
The remote control does not work.
The remote control may not work if the RS-232C cable is removed or the program is closed abnormally while the Remote
Control function is Disable. To resolve this, run the program again and set Remote Control to Enable.
Ensure you select the input source the display is connected to.
79
How display properties are shown when multiple displays are used
1
When no display is selected: The default value is displayed.
2
When one display is selected: Settings for the selected display are displayed.
3
When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3.
4
When the All+Select checkbox is checked and all displays are selected: The default settings are displayed.
80
Chapter 05
Screen Adjustment
Configure the Picture settings (Backlight, Color Tone, etc.).
-- The layout of the Picture menu options may vary depending on the product.
Picture Mode
MENU m :Picture
T
Picture Mode
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Different Picture Mode options are displayed depending on the current input source.
ENTER
If the input source is PC, HDMI(PC)
•• Information: This mode reduces eye fatigue and is suitable for displaying information to the public.
Picture
•• Advertisement: This mode is suitable for displaying video content and indoor/outdoor advertisements.
Picture Mode
Information
· Backlight
100
100
· Contrast
100
100
· Brightness
45
45
· Sharpness
50
50
· Color
50
50
· Tint (G/R)
G50
50
If the input source is HDMI(AV)
•• Dynamic: This mode is suitable when the ambient light is bright.
•• Standard: This mode is generally suitable for any environment.
•• Natural: Suitable for reducing eye strain.
•• Movie: This mode reduces eye fatigue.
R50
50
-- The displayed image may differ depending on the model.
81
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
MENU m :Picture
T
Your product has several options for adjusting picture quality.
Input source
PC, HDMI (when a PC is connected)
Picture Mode
Information
Backlight / Contrast / Brightness /
Sharpness
Advertisement
Backlight / Contrast / Brightness /
Sharpness
Dynamic, Standard, Natural, Movie
Backlight / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
ENTER
Picture
Picture Mode
Information
· Backlight
100
100
· Contrast
100
100
· Brightness
45
45
· Sharpness
50
50
· Color
50
50
· Tint (G/R)
G50
50
HDMI (720p, 1080i, 1080p)
Adjustable options
――When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R), the OSD will be adjusted
accordingly.
――You can adjust and store settings for each external device you have connected to an input on the product.
――Lowering picture brightness reduces power consumption.
R50
50
-- The displayed image may differ depending on the model.
82
Picture Size
MENU m :Picture
T
Picture Size
Picture Size
If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. However, we highly recommend you
use your product’s 16:9 mode most of the time.
ENTER
•• 16:9: Sets the picture to 16:9 wide mode.
•• Zoom1: Use for moderate magnification. Cuts off the top and sides.
Picture Size
Picture Size
•• Zoom2: Use for a stronger magnification.
16:9
· Position
Resolution Select
Off
•• Smart View 1: Reduces the 16:9 picture by 50%.
――Smart View 1 is enabled only in HDMI mode.
•• Smart View 2: Reduces the 16:9 picture by 25%.
――Smart View 2 is enabled only in HDMI mode.
•• Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
•• 4:3: Sets the picture to basic (4:3) mode.
――Do not set your product to 4:3 format for a long time.
-- The displayed image may differ depending on the model.
The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn)
which is not covered by the warranty.
•• Screen Fit: Displays the full image without any cut-off when HDMI(720p / 1080i / 1080p) signals are inputted.
•• Custom: Changes the resolution to suit the user's preferences.
•• Original Ratio: If the input source is PC, HDMI(PC connection) the video will display in the original aspect ratio.
――Available ports may differ depending on the model.
――You can adjust and store settings for each external device you have connected to an input on the product.
Picture Sizes available by Input Source.
Input Source
Picture Size
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Smart View 1, Smart View 2, Custom, Wide Fit,
Screen Fit
PC, HDMI(when a PC is connected)
16:9, 4:3, Original Ratio
83
Position
Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit.
――To use the Position function after selecting Zoom1, Zoom2, Wide Fit, Screen Fit or Original Ratio, follow these steps.
Picture Size
Picture Size
16:9
· Position
Resolution Select
1
Press the
button to select Position. Press the
2
Press the
or
3
Press the
button.
button to move the picture up or down.
button.
Off
-- The displayed image may differ depending on the model.
Resolution Select
If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture
quality by selecting the same resolution for the product as the PC using this menu.
Available resolutions: Off / 1024x768 / 1280x768 / 1360x768 / 1366x768
Picture Size
Picture Size
16:9
· Position
Resolution Select
Off
-- Available in PC mode only.
-- The displayed image may differ depending on the model.
84
Auto Adjustment
MENU m :Picture
T
Auto Adjustment
Adjust frequency values/positions and fine tune the settings automatically.
ENTER
Picture
Auto Adjustment
-- Available in PC mode only.
-- The displayed image may differ depending on the model.
PC Screen Adjustment
•• Coarse / Fine
Removes or reduces picture noise.
If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the center
of screen.
PC Screen Adjustment
Coarse
Fine
Position
50
0
•• Position
To adjust the PC’s screen position if it is not centered or does not fit the product screen.
Press the
or
button to adjust the Vertical Position. Press the
or
button to adjust the Horizontal Position.
•• Image Reset
Resets the image to the default settings.
Image Reset
-- The displayed image may differ depending on the model.
85
PIP
T
MENUm :
System
PIP Settings
PIP
ENTER
Picture
PIP
The picture from the external video source will be in the main screen and the picture from the product will be in the PIP subpicture screen.
Main picture
Sub picture
PC
HDMI
HDMI
PC
•• PIP (Off / On): Activate or deactivate the PIP function.
•• Source: You can select a source of the sub picture.
-- The displayed image may differ depending on the model.
•• Size (
-- For PIP sound, refer to the Sound Select instructions.
•• Position (
――In (
,
-- If you turn the product off while watching in the PIP mode, the PIP function is reset to off.
When you turn your product on, you must turn PIP on again to watch in the PIP mode.
,
,
,
,
,
,
): Select a size for the subpicture.
,
,
): Select a position for the sub-picture.
,
) mode, you cannot select Position.
•• Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the Sub picture.
-- You may notice that the picture in the PIP screen becomes slightly unnatural when you use
the main screen to view a game or karaoke.
86
Advanced Settings
MENU m :Picture
T
Advanced Settings
Input Source
ENTER
Advanced Settings
Dynamic Contrast
Medium
Black Tone
Off
Flesh Tone
0
RGB Only Mode
Color Space
Off
Native
Picture Mode
PC, HDMI (when a PC is
connected)
Advanced Settings
Information
White Balance / Gamma
Advertisement
White Balance / Gamma
Dynamic Contrast
Adjust the screen contrast.
•• Off / Low / Medium / High
Black Tone
Select the black level to adjust the screen depth.
•• Off / Dark / Darker / Darkest
Flesh Tone
Emphasize pink Flesh Tone.
-- The displayed image may differ depending on the model.
RGB Only Mode
Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.
•• Off / Red / Green / Blue
Color Space
Adjusts the range and variety of colors (the color space) available to create images.
•• Auto / Native / Custom
――To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom.
87
White Balance
Advanced Settings
Adjust the color temperature for a more natural picture.
•• R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness.
White Balance
Gamma
Motion Lighting
0
Off
•• R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness.
•• Reset: Resets the White Balance to its default settings.
Gamma
Adjust the primary color intensity.
-- The displayed image may differ depending on the model.
Motion Lighting
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
•• Off / On
88
Picture Options
MENUm
Picture
:
TPicture Options
Select an option using the
Color Temp.
arrow keys, and the press
Use the arrow keys to change the setting, and then press
ENTER
Picture Options
Color Tone
and
Input source
PC, HDMI(when a PC is
connected)
Standard
Picture Mode
.
.
Picture Options
Information
Color Tone / Color Temp. / Dynamic Backlight
Advertisement
Color Tone / Color Temp. / Dynamic Backlight
10000K
Digital Clean View
Off
MPEG Noise Filter
Off
HDMI Black Level
Normal
Film Mode
Off
Dynamic Backlight
Off
-- The displayed image may differ depending on the model.
89
Color Tone
Picture Options
Color Tone
Color Temp.
Standard
10000K
Digital Clean View
Off
MPEG Noise Filter
Off
HDMI Black Level
Normal
Film Mode
Off
Dynamic Backlight
Off
If the input source is PC, HDMI(PC connection).
•• Off / Cool / Standard / Warm
If the input source is HDMI.
•• Off / Cool / Standard / Warm1 / Warm2
――Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic.
――Settings can be adjusted and stored for each external device connected to an input on the product.
Color Temp.
Adjust the color temperature (Red/Green/Blue). (Range: 3000K–15000K)
――This option is available when Color Tone is set to Off.
Digital Clean View
-- The displayed image may differ depending on the model.
If the broadcast signal received by your product is weak, you can activate the Digital Clean View feature to reduce any static
and ghosting that may appear on the screen.
•• Off / Low / Medium / High / Auto
――When the signal is weak, try all the options until the the product displays the best picture.
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
•• Off / Low / Medium / High / Auto
90
HDMI Black Level
Picture Options
HDMI Black Level
Normal
Film Mode
Off
Dynamic Backlight
Off
Selects the black level on the screen to adjust the screen depth.
•• Normal / Low
――Available only in HDMI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p).
Film Mode
This mode is suitable to view movies.
-- The displayed image may differ depending on the model.
Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
•• Off / Auto1 / Auto2
――Available in HDMI(1080i).
Dynamic Backlight
Automatically adjust the backlight to provide the best possible screen contrast under the current conditions.
•• Off / On
――The Dynamic Backlight is not available when the input source is set to PC while Video Wall is On.
91
Picture Off
The product screen is turned off but the audio will continue. Press any key on your remote to turn the screen
back on.
Picture
Picture Off
Reset Picture
-- The displayed image may differ depending on the model.
Reset Picture
Resets your current picture mode to its default settings.
Picture
Picture Off
Reset Picture
-- The displayed image may differ depending on the model.
92
Chapter 06
Sound Adjustment
Configure the sound (Sound) settings for the product.
Sound Mode
MENU m :Sound
T
Sound Mode
You can select a sound mode to suit your personal preferences.
•• Standard: Selects the normal sound mode.
ENTER
•• Movie: Provides the best sound for movies.
•• Clear Voice: Emphasizes voices over other sounds.
Sound
Sound Mode
•• Music: Emphasizes music over voices.
Standard
•• Amplify: Increase the intensity of high-frequency sound to allow a better listening experience for the hearing impaired.
――If Speaker Select is set to External, Sound Mode is disabled.
Sound Effect
Speaker Settings
Reset Sound
-- The displayed image may differ depending on the model.
93
Sound Effect
MENU m :Sound
T
Sound Effect
Configure your preferred sound effect for output sound.
――If Speaker Select is set to External, Sound Effect is disabled.
ENTER
Sound
Sound Mode
Standard
Sound Effect
Speaker Settings
Reset Sound
――Available only when Sound Mode is set to Standard.
•• DTS TruSurround (Off / On)
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head
Related Transfer Function) technology.
•• DTS TruDialog (Off / On)
This function allows you to increase the intensity of a voice over background music or sound effects so that dialog can be
heard more clearly.
•• Equalizer
Use Equalizer to customize sound setting for each speaker.
-- Balance(L/R): Adjusts the balance between the right and left speaker.
-- 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of specific bandwidth frequencies.
-- Reset: Resets the equalizer to its default settings.
-- The displayed image may differ depending on the model.
94
Speaker Settings
MENU m :Sound
T
Speaker Settings
ENTER
Sound
•• Speaker Select (External / Internal / Receiver)
If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo
caused by the difference in decoding speed between the products speakers and the speakers attached to your audio
receiver. If this occurs, set the product to External.
――When you set Speaker Select to External, the products speakers are turned off.
You will hear sound through the external speakers only. When the Speaker Select is set to Internal, both the product
speakers and the external speakers are on. You will hear sound through both.
Sound Mode
Standard
――If there is no video signal, both the products speakers and the external speakers will be mute.
Sound Effect
Speaker Settings
Reset Sound
-- The displayed image may differ depending on the model.
Reset Sound
MENU m :Sound
T
Reset Sound
Reset all sound settings to the factory defaults.
ENTER
Sound
Sound Mode
Standard
Sound Effect
Speaker Settings
Reset Sound
-- The displayed image may differ depending on the model.
95
Chapter 07
Applications
Source List
Refresh
T
MENUm :
Applications
Source List
TOOLS
Refresh
Source allows you to select a variety of sources and change source device names.
If you cannot find a device you want, select Refresh to refresh the list.
You can display the screen of a source device connected to the product. Select a
source from Source List to display the screen of the selected source.
――The input source can also be changed by using the SOURCE button on the
Edit Name
remote control.
――The screen may not display correctly if an incorrect source is selected for the
source device you want to convert to.
T
Applications
MENUm :
Source List
ENTER
Applications
Source List
T
MENUm :
Applications
Source List
TOOLS
ENTER
Edit Name
ENTER
Sometimes the screen will not display properly unless the name of a source device is specified in Edit Name.
In addition, it is best to rename the source device in Edit Name to obtain optimal picture quality.
――The list can include the following source devices. Source devices on the list differ depending on the selected source.
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV /
IPTV / Blu-ray / HD DVD / DMA
――Available settings in the Picture menu depend on the current source and settings made in Edit Name.
•• When connecting a PC to the HDMI IN port with HDMI cable, you should set the product to PC mode under Edit Name.
•• When connecting a PC to the HDMI IN port with HDMI to DVI cable, you should set the product to DVI PC mode under
Edit Name.
•• When connecting an AV devices to the HDMI IN port with HDMI to DVI cable, you should set the product to DVI Devices
mode under Edit Name.
Information
T
MENUm :
Applications
Source List
TOOLS
Information
ENTER
You can see detailed information about the selected external device.
-- The displayed image may differ depending on the model.
96
Chapter 08
System
Menu Language
Set the menu language.
――A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions
on your PC.
T
MENUm :
System
Menu Language
ENTER
System
Menu Language
English
Multi Control
Time
Eco Solution
Screen Burn Protection
Ticker
Off
-- The displayed image may differ depending on the model.
97
Multi Control
MENU m :
System
T
Multi Control
Configuring settings for Multi Control
•• ID Setup
Assign an ID to a set. (Range: 0~99)
ENTER
Press
to select a number, and press
.
•• ID Input
Enter the ID number of the product connected to the input cable for input signal reception.
System
Menu Language
or
English
Enter the number you want using the number buttons on the remote control.
Multi Control
Time
Eco Solution
Screen Burn Protection
Ticker
Off
-- The displayed image may differ depending on the model.
98
Time
MENU m :
System
T
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time
using the Timer function.
Time
Clock Set
ENTER
Set the clock to use the various various timer features of the product.
Time
•• Clock Set
Set the Date and Time.
Clock Set
Sleep Timer
Select Clock Set. Select Date or Time, and then press
Off
.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow buttons
to move from one entry field to the next. Press
when done.
――You can set the Date and Time directly by pressing the number buttons on the remote control.
-- The displayed image may differ depending on the model.
Sleep Timer
Automatically shuts off the product after a preset period of time.
(Off / 30 min. / 60 min. / 90 min. / 120 min. / 150 min. / 180 min.)
――Use the up and down arrows to select a period of time, and then press
. To cancel Sleep Timer, select Off.
99
On Timer
Time
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
On Timer
Off Timer
Holiday Management
The power is turned on with the specified volume or input source.
Off
On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time first.
(On Timer 1 ~ On Timer 7)
――You must set the clock before you can use On Timer.
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the
days you want On Timer to turn on your product.
――The check mark indicates days you’ve selected.
-- The displayed image may differ depending on the model.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left
and right arrow buttons to change entry fields.
•• Volume: Set the desired volume level. Use the left and right arrow buttons to change the volume level.
•• Source: Select the input source of your choice.
100
Off Timer
Time
Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off Timer 7)
――You must set the clock before you can use Off Timer.
On Timer
Off Timer
Holiday Management
Off
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the
days you want Off Timer to turn off your product.
――The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use the left
and right arrow buttons to change entry fields.
-- The displayed image may differ depending on the model.
Holiday Management
Timer will be disabled during a period specified as a holiday.
•• Add: Specify the period you want to add as a holiday.
Select the start and end dates of the holiday you want to add using the / buttons, and click the Save button.
The period will be added to the list of holidays.
-- Start: Set the start date of the holiday.
-- End: Set the end date of the holiday.
-- Delete: Delete all items from the list of holidays.
Select Delete. The message "Delete all holidays?" will appear.
Select Yes. All holidays will be deleted.
•• Apply: Set the On Timer and Off Timer to not activate on public holidays.
-- Press
to select the On Timer and Off Timer settings you do not want to activate.
-- The selected On Timer and Off Timer will not activate.
101
Eco Solution
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
T Eco Solution
MENUm :
System
ENTER
•• Off / Low / Medium / High
Eco Sensor
Eco Solution
Energy Saving
Off
Eco Sensor
Off
Auto Power Off
Off
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
•• Off / On
――Adjusting the Backlight setting under Picture while Eco Sensor is on will disable the Off.
•• Min. Backlight: When Eco Sensor is On, you can manually adjust the minimum screen brightness.
――If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the
surrounding light intensity. You can control the screen’s minimum brightness with the Min. Backlight function.
-- The displayed image may differ depending on the model.
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front panel
within 4 hours to prevent overheating.
•• Off / On
102
Screen Burn Protection
T
MENUm :
System
Screen Burn Protection
To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology.
Pixel Shift moves the picture slightly on the screen.
ENTER
Pixel Shift
Screen Burn Protection
Minimize image retention by finely moving pixels horizontally or vertically.
Pixel Shift
Off
Timer
Off
Immediate Display
Off
Side Gray
Off
-- The displayed image may differ depending on the model.
The Pixel Shift Time setting allows you to program the time between movements of the picture in minutes.
•• Horizontal: Sets how many pixels the screen moves horizontally.
•• Vertical: Sets how many pixels the screen moves vertically.
•• Time: Set the time interval for performing the horizontal or vertical movement, respectively.
Available Pixel Shift Settings and Optimum Settings.
Available Settings
Optimum Settings
Horizontal (pixels)
0~4
4
Vertical (pixels)
0~4
4
Time (minute)
1 min.~4 min.
4 min.
――The Pixel Shift value may differ depending on the product size (inches) and mode.
――Displaying a still image or a 4:3 output for an extended period of time may cause image retention. This is not a defect in the
product.
――This function is not available in the Screen Fit mode.
103
Timer
Screen Burn Protection
You can set the timer for Screen Burn Protection.
Pixel Shift
Off
Timer
Off
•• Off
Immediate Display
Off
•• Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period).
――Period and Time can be configured when Repeat is selected.
Side Gray
Off
-- The displayed image may differ depending on the model.
The Pixel Shift feature stops automatically after a specified period of time.
•• Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to
End Time).
――The option is enabled only when Clock Set is configured.
•• Mode: Select a screen protective pattern to display.
-- Pixel: Pixels on the screen alternate black continuously.
-- Rolling Bar: A vertical bar moves left to right.
-- Fading Screen: The entire screen becomes brighter, then darker.
――The Rolling Bar and Fading Screen patterns appear only once regardless of the specified repeat period or time.
•• Period: Specify the time interval to activate the Screen Burn Protection function.
-- 1 Hour ~ 10 Hour
――The option is enabled when Repeat is selected for Timer.
•• Time: Specify the duration to keep the Screen Burn Protection function on.
-- 10 sec ~ 50 sec
――The option is enabled when Pixel is selected for Mode.
•• Start Time: Set the start time to activate the screen protection function.
――The option is enabled when Interval is selected for Timer.
•• End Time: Set the end time to deactivate the screen protection function.
――The option is enabled when Interval is selected for Timer.
104
Immediate Display
Screen Burn Protection
Pixel Shift
Off
Timer
Off
Immediate Display
Off
Side Gray
Off
Select the screen saver you want to display immediately.
•• Off / Pixel / Rolling Bar / Fading Screen
Side Gray
When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen.
•• Off / Light / Dark
-- The displayed image may differ depending on the model.
105
Ticker
T
MENUm :
System
Input text while a video or image is displayed and display the text on the screen.
Ticker
ENTER
System
Screen Burn Protection
Ticker
Video Wall
Source AutoSwitch Settings
•• Off / On
――Message, Time, Position, Motion, and Font Options are enabled only when Ticker is set to On.
•• Message: Enter a message to display on the screen.
•• Time: Set the Start Time and End Time to display a Message.
•• Position: Select an orientation to display a Message from Horizontal and Vertical.
-- Horizontal (Left / Center / Right)
-- Vertical (Up / Middle / Down)
•• Motion: Specify the Direction and Speed to display a Message.
-- Motion (Off / On)
-- Direction (Left / Right / Up / Down)
-- Speed (Slow / Normal / Fast)
――Direction and Speed are enabled only when Motion is set to On.
•• Font Style: Specify the message Size and Font Color.
-- The displayed image may differ depending on the model.
106
Video Wall
T
MENUm :
System
Customize the layout of multiple displays that are connected to form a video wall.
In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays.
Video Wall
Video Wall
ENTER
You can activate or deactivate Video Wall.
Video Wall
To organize a video wall, select On.
Video Wall
On
· Format
Full
· Horizontal
1
· Vertical
1
· Screen Position
Format
Select a format to display images on multiple displays.
•• Full: Display images in full screen.
•• Natural: Display images at the original resolution without enlarging or reducing.
――The Format option is only enabled when Video Wall is set to On.
Horizontal
-- The displayed image may differ depending on the model.
-- Some models may not support the MagicInfo function.
-- The Video Wall option is only enabled when PIP is set to Off.
-- If more than four displays are connected horizontally and vertically, it is recommended that
you use an input resolution of XGA (1024 x 768) level or higher to prevent a dark picture due
to degradation in the contrast or color intensity.
This function automatically divides the screen according to the specified number of horizontal displays.
Enter the number of horizontally arranged displays.
The horizontal screen will automatically be divided according to the number entered.
A maximum of 15 displays can be assigned to the horizontal arrangement.
――The screen can be divided into a maximum of 100 screens (horizontal and vertical screens multiplied). For example, if the
horizontal arrangement is set to 15, a maximum of 6 displays can be assigned to the vertical arrangement. Conversely, if the
vertical arrangement is set to 15, a maximum of 6 displays can be assigned to the horizontal arrangement.
――The Horizontal option is only enabled when Video Wall is set to On.
107
Vertical
Video Wall
Video Wall
On
· Format
Full
· Horizontal
1
· Vertical
1
· Screen Position
This function automatically divides the screen according to the specified number of vertical displays.
Enter the number of vertically arranged displays.
The vertical screen will automatically be divided according to the number entered.
A maximum of 15 displays can be assigned to the vertical arrangement.
――The screen can be divided into a maximum of 100 screens (horizontal and vertical screens multiplied). For example, if the
horizontal arrangement is set to 15, a maximum of 6 displays can be assigned to the vertical arrangement. Conversely, if the
vertical arrangement is set to 15, a maximum of 6 displays can be assigned to the horizontal arrangement.
――The Vertical option is only enabled when Video Wall is set to On.
Screen Position
-- The displayed image may differ depending on the model.
You can customize the arrangement of split screens by moving displays identified with a number using the Screen Position
function.
Select Screen Position to display the arrangement of displays (identified with a number) specified according to the
Horizontal or Vertical settings. To customize the arrangement, move a number (display) using the direction buttons on the
.
remote control and press
――A maximum of 100 displays can be arranged in Screen Position.
――The Screen Position option is only enabled when Video Wall is set to On.
――The Screen Position window is only displayed when Horizontal and Vertical are configured.
108
Source AutoSwitch Settings
Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will
automatically search the different video input sources for active video.
T
MENUm :
System
Source AutoSwitch
Source AutoSwitch Settings
ENTER
When the Source AutoSwitch is On, the display video source will automatically be searched for active video.
Source AutoSwitch Settings
The Primary Source selection will be activated, if the current video source is not recognized.
Source AutoSwitch
On
· Primary Source Recovery
Off
· Primary Source
All
· Secondary Source
PC
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an active source,
each search checking the primary and then secondary source. If both searches fail, the display will return to the first video
source and display a message indicating that there is no signal.
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking
for an active video source, returning back to the first video source in the sequence if no video is found.
Primary Source Recovery
-- The displayed image may differ depending on the model.
Select whether to restore the selected primary input source when a primary input source is connected.
――The Primary Source Recovery function is disabled if Primary Source is set to All.
Primary Source
Specify Primary Source for the automatic input source.
Secondary Source
Specify Secondary Source for the automatic input source.
109
General
Max. Power Saving
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
T
MENUm :
System
General
•• Off / On
――Available only PC, HDMI mode.
ENTER
General
Game Mode
Max. Power Saving
On
Game Mode
Off
When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by
selecting game mode.
Auto Power
Off
•• Off / On
――Precautions and limitations for Game Mode
Safety Lock
Off
Button Lock
Off
Standby Control
Off
Lamp Schedule
Off
To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
――Game Mode is not available when the input source is set to PC.
――If Game Mode is On. Picture Mode is set to Standard and Sound Mode is set to Movie.
Auto Power
Enabling this option will automatically power on the product if the power cable is connected.
•• Off / On
-- The displayed image may differ depending on the model.
Safety Lock
It sets safe lock function.
•• Off / On
All the menus and buttons of the product and remote control, except for the LOCK button on the remote control, will be
locked by the Safety Lock function.
To unlock the menus and buttons, press the LOCK button and then enter the password (default password: 0 - 0 - 0 - 0).
110
Button Lock
General
This menu can be used to lock the buttons on the product.
Max. Power Saving
On
Game Mode
Off
Auto Power
Off
Standby Control
Safety Lock
Off
You can set the screen standby mode to be applied when an input signal is received.
Button Lock
Off
Standby Control
Off
Lamp Schedule
Off
Only the remote control can control the product if Button Lock is set to On.
•• Off / On
•• Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
•• On
Power-saving mode will activate if no input signals are detected.
•• Off
The message No Signal will appear if no input signals are detected.
-- The displayed image may differ depending on the model.
――The Standby Control option is only enabled when Source List is set to PC, HDMI.
――If No Signal is displayed although a source device is connected, check the cable connection.
Lamp Schedule
Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.
•• Off / On
111
OSD Display
General
Displays or hides a menu item on the screen.
――Source OSD / No Signal OSD / MDC OSD
OSD Display
Power On Adjustment
0 sec
Temperature Control
77
Power On Adjustment
You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds)
――A warm-up time that is too short may damage the product due to overvoltage.
-- The displayed image may differ depending on the model.
Temperature Control
This function detects the internal temperature of the product. You can specify the temperature range that is acceptable.
The default temperature is set to 77 C.
The recommended operating temperature for this product is 75 to 80 C (based on an ambient temperature of 40 C).
――The screen will become darker if the current temperature exceeds the specified temperature limit. If the temperature
continues to rise, the product will power off to prevent overheating.
112
Change PIN
T
MENUm :
System
Change PIN
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN.
ENTER
When the Confirm screen disappears, press the Close button. The product has memorized your new PIN.
System
Change PIN
-- The displayed image may differ depending on the model.
113
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
T
MENUm :
System
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
――You can only control Anynet+ devices using the product remote control, not the buttons on the product.
Anynet+ (HDMI-CEC)
ENTER
Anynet+ (HDMI-CEC)
――The product remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
Anynet+ (HDMI-CEC)
On
Auto Turn Off
Yes
――Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
――While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display. It does not work if the
AV device is connected as a secondary display.
――Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
Anynet+ Menu
-- The displayed image may differ depending on the model.
-- The Anynet+ (HDMI-CEC) functions do not operate with other manufacturers’ products.
-- For instructions explaining how to connect Anynet+ external devices, refer to the device’s user
manual.
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the product.
Anynet+ Menu
Description
View PC
Changes Anynet+ mode to PC mode.
Device List
Shows the Anynet+ device list.
(device_name) MENU
Shows the menu of the connected device menus. E.g. if a DVD player is connected,
the disc menu of the DVD player will appear.
(device_name) Tools
Shows the tools menu of the connected device. E.g. if a DVD player is connected, the
tools menu of the DVD player will appear.
――Depending on the device, this menu may not be available.
(device_name) Title Menu
Shows the title menu of the disc in the connected device. E.g. If a DVD player is
connected, the title menu of the movie in the DVD player will appear.
――Depending on the device, this menu may not be available.
-- You can connect only one receiver (home theater).
114
Auto Turn Off
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
On
Auto Turn Off
Yes
Setting an Anynet+ Device to turn Off automatically when the product is turned off.
•• No / Yes
――If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off.
――May not be enabled depending on the device.
Switching between Anynet+ Devices
-- The displayed image may differ depending on the model.
1
Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press
2
Select Device List, and then press the
.
button.
If you cannot find a device you want, select Refresh to refresh the list.
3
Select a device, and then press the
button. You can switch to the selected device.
――The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu.
――Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in
progress.
――If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use
the Anynet+ function.
――Make sure to switch to an Anynet+ device by using the Device List.
115
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution
•• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
•• You can connect only one receiver (home theater).
•• Check if the Anynet+ device power cord is properly connected.
•• Check the Anynet+ device’s Video/Audio/HDMI cable connections.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+setup menu.
•• Check whether the remote control is Anynet+ compatible.
•• Anynet+ doesn’t work in certain situations. (initial setup)
•• If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your product
off and on again.
•• Check if the Anynet+ function of the Anynet device is set on.
I want to start Anynet+.
•• Check if the Anynet+ device is properly connected to the product and check if the Anynet+ (HDMI-CEC) is set to On in the
Anynet+ System menu.
•• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+.
•• Select View PC in the Anynet+ menu.
•• Press the SOURCE button on the product remote control and select a non- Anynet+ device.
The message “Connecting to
Anynet+ device ...” appears on the
screen.
•• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
The Anynet+ device does not
play.
•• You cannot use the play function when initial setup is in progress.
•• Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+.
116
Problem
The connected device is not
displayed.
Possible Solution
•• Check whether or not the device supports Anynet+ functions.
•• Check whether or not the HDMI cable is properly connected.
•• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ System menu.
•• Search Anynet+ devices again.
•• Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable.
•• Some HDMI cables may not support Anynet+ functions.
•• If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please
repeat the device scan.
The product sound is not output
through the receiver.
•• Connect the optical cable between product and the receiver.
117
Magic Clone
T Magic Clone
MENUm :
System
Export the product settings to a USB device or load the settings via a USB device.
This option is useful when assigning the same settings to several products.
ENTER
Magic Clone
•• Clone to USB: Copy the product settings to a USB device.
•• Clone From USB: Assign the settings saved in a USB device to the product.
-- After configuration is complete, the product is rebooted automatically.
――The option may not work properly if the USB device contains a file other than a settings file.
――Confirm that the USB device functions properly before running the option.
Clone to USB
――The option is available for products with the same Model Code and Software Version.
Go to Support
Clone From USB
Contact Samsung and find the product Model Code and Software Version.
-- The displayed image may differ depending on the model.
Reset System
T Reset System
MENUm :
System
This option returns the current settings under system to the default factory settings.
ENTER
System
Reset System
-- The displayed image may differ depending on the model.
118
Reset All
T Reset All
MENUm :
System
This option returns all the current settings for a display to the default factory settings.
ENTER
System
Reset All
-- The displayed image may differ depending on the model.
119
Chapter 09
Support
Software Update
-- Current Version: This is the software
version already installed in the product.
T
MENUm :
Support
Software Update
ENTER
The Software Update menu lets you upgrade your product software to the latest version.
――Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software upgrade.
――When you upgrade software, all video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can
easily reset them after the upgrade.
By USB
-- Please be careful not to remove the USB
drive until the upgrade is complete.
1
Visit http://www.samsunglfd.com
2
Download the latest USB software upgrade exe archive to your computer.
3
Extracts the exe archive to your computer. You should have a single folder with the same name as the exe file.
4
Copy the folder to a USB flash drive.
5
Turn on the product, and then insert the USB flash drive into the USB port of the product.
6
In the product menu, go to Support
Software Update.
120
Contact Samsung
T
MENUm :
Support
Contact Samsung
ENTER
View this information when your product does not work properly or when you want to upgrade the software.
You can find information regarding our call centers and how to download products and software.
――Contact Samsung and find the product Model Code and Software Version.
121
Chapter 10
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Center
Before calling Samsung Customer Service
Center, test your product as follows. If
the problem persists, contact Samsung
Customer Service Center.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
If the screen remains blank, check the PC
system, video controller and cable.
1
Power off both the PC and product.
2
Disconnect all the cables from the product.
3
Power on the product.
4
If No Signal is displayed, the product is operating normally.
Checking the Resolution and Frequency
Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected
(refer to Supported Resolutions).
122
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connection is secure.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product and
PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the
screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust
the screen settings.)
Screen issue
The power LED is off. The screen will not switch on.
Make sure that the power cord is connected.
No Signal is displayed on the screen (refer to "Connecting to
Check that the product is connected correctly with a cable
a PC").
Not Optimum Mode is displayed.
Check that the device connected to the product is powered on.
This message is displayed when a signal from the graphics card exceeds the product's maximum
resolution and frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to
the product specifications.
The images on the screen look distorted.
Check the cable connection to the product
The screen is not clear. The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
123
Screen issue
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
Check that the resolution and frequency of the PC and graphics card are set within a range compatible
with the product. Then, change the screen settings if required by referring to the Additional
Information on the product menu and the Standard Signal Mode Table.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
Go to Picture and adjust the Color Space settings.
White does not really look white.
Go to Picture and adjust the White Balance settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the mouse to return to the previous screen.
Sound issue
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software program.
124
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
125
Q&A
Question
How can I change the frequency?
Answer
Set the frequency on your graphics card.
•• Windows XP: Go to Control Panel Appearance and Themes Display
Advanced Monitor and adjust the frequency in Monitor Settings.
•• Windows ME/2000: Go to Control Panel Display
adjust the frequency in Monitor Settings.
Refer to the user manual for your PC or
graphics card for further instructions on
adjustment.
Settings
Settings
Advanced
Monitor and
•• Windows Vista: Go to Control Panel Appearance and Personalization Personalize
Display Settings Advanced Settings Monitor and adjust the frequency in Monitor
Settings.
•• Windows 7: Go to Control Panel Appearance and Personalization Display Adjust
resolution Advanced Settings Monitor and adjust the frequency in Monitor Settings.
•• Windows 8: Go to Settings Control Panel
Adjust resolution Advanced Settings
Settings.
How can I change the resolution?
•• Windows XP: Go to Control Panel
adjust the resolution.
Appearance and Personalization Display
Monitor and adjust the frequency in Monitor
Appearance and Themes
•• Windows ME/2000: Go to Control Panel
Display
Display
Settings and
Settings and adjust the resolution.
•• Windows Vista: Go to Control Panel Appearance and Personalization
Display Settings and adjust the resolution.
•• Windows 7: Go to Control Panel Appearance and Personalization
Resolution and adjust the resolution.
Personalize
Display
•• Windows 8: Go to Settings Control Panel Appearance and Personalization
Adjust Resolution and adjust the resolution.
Adjust
Display
126
Question
How do I set powersaving mode?
Answer
•• Windows XP: Set power-saving mode in Control Panel
Screen Saver Settings or BIOS SETUP on the PC.
Appearance and Themes
•• Windows ME/2000: Set power-saving mode in Control Panel
Settings or BIOS SETUP on the PC.
Display
Display
Screen Saver
•• Windows Vista: Set power-saving mode in Control Panel Appearance and Personalization
Personalize Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 7: Set power-saving mode in Control Panel Appearance and Personalization
Personalize Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 8: Set power-saving mode in Settings Control Panel Appearance and
Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC.
127
Chapter 11
Specifications
1
General
Size
Model Name
Panel
2
ED32C
40 Class (40" / 101 cm)
46 Class (45.9" / 116 cm)
55 Class (54.6" / 138 cm)
Display area
697.6845 mm (H) x
392.256 mm (V)
885.6 mm (H) x
498.15 mm (V)
1018.08 mm (H) x
572.67 mm (V)
1209.6 mm (H) x
680.4 mm (V)
27.5 inches (H) x
15.4 inches (V)
34.9 inches (H) x
19.6 inches (V)
40.1 inches (H) x
22.5 inches (V)
47.6 inches (H) x
26.8 inches (V)
736.0 x 434.5 x 93.7 mm
925.4 x 541.0 x 93.6 mm
1057.7 x 615.8 x 94.8 mm
1247.7 x 722.9 x 94.8 mm
29.0 x 17.1 x 3.7 inches
36.4 x 21.3 x 3.7 inches
41.6 x 24.2 x 3.7 inches
49.1 x 28.5 x 3.7 inches
Weight (without stand)
6.0 kg / 13.2 lbs
9.3 kg / 20.5 lbs
11.9 kg / 26.2 lbs
18.3 kg / 40.3 lbs
VESA
200 x 200 mm / 7.9 x 7.9 inches
Display Color
8bit , 16.7M (ED32C) 10bit(Dithering), 1.07B(ED40C, ED46C, ED55C)
Dimensions (W x H x D)
Dimensions (W x H x D)
ED55C
32 Class (31.5" / 80 cm)
H
3
ED46C
Size
Display area
V
ED40C
400 x 400 mm / 15.7 x 15.7 inches
D
Synchronization
H
Resolution
W
Horizontal Frequency
30 ~ 81 kHz
Vertical Frequency
48 ~ 75 Hz
Optimum resolution
1920 x 1080 @ 60 Hz, 1366 x 768 @ 60 Hz(ED32C Model Only)
Maximum resolution
1920 x 1080 @ 60 Hz
128
Model Name
ED32C
ED40C
ED46C
ED55C
Maximum Pixel Clock
148.5 MHz (Analog, Digital)
Power Supply
This product uses 100 to 240V. Refer to the label at the back of the product as the standard voltage can vary in
different countries.
Signal connectors
Environmental
considerations
Input
PC D-Sub, HDMI, Audio In, RS232C In, USB(Service Only)
Output
Audio Out, RS232C Out
Operating
Temperature : 50 F ~ 104 F (10 C ~ 40 C)
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4 F ~ 113 F (-20 C ~ 45 C)
Humidity : 5 % ~ 95 %, non-condensing
――Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor
settings.
Monitor installation takes place automatically. However, you can customize the installation settings if desired.
――Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect
product performance.
――This device is a Class A digital apparatus.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
129
PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used
for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Powersavign mode only functions when the product is connected to a PC with a power-saving function.
PowerSaver
Normal Operation
Rating
Power Indicator
Power Consumption
Typical
Max
On
Power saving
mode
Power off
(SOG Signal : Not
Support the DPM Mode)
Power off
(Power Button
off)
Blinking
On
On
ED32C
70 Watts
47 Watts
77 Watts
0.5 Watts
0.5 Watts
0 Watts
ED40C
100 Watts
76 Watts
110 Watts
0.5 Watts
0.5 Watts
0 Watts
ED46C
110 Watts
88 Watts
121 Watts
0.5 Watts
0.5 Watts
0 Watts
ED55C
150 Watts
120 Watts
165 Watts
0.5 Watts
0.5 Watts
0 Watts
――The displayed power consumption level can vary in different operating conditions or when settings are changed.
――SOG(Sync On Green) is not supported.
――To reduce the power consumption to 0, turn off the switch at the back or disconnect the power cord. Disconnect the power cable if you will not be using the product
for an extended period of time (during vacation, etc.).
130
Preset Timing Modes
-- Horizontal Frequency
The time required to scan a single line
from the left to the right side of the
screen is called a horizontal cycle. The
reciprocal number of a horizontal cycle
is called horizontal frequency. Horizontal
frequency is measured in kHz.
-- Vertical Frequency
The product displays a single image
multiple times per second (like a
fluorescent light) to display what the
viewer sees. The rate of a single image
being displayed repeatedly per second is
called vertical frequency or refresh rate.
Vertical frequency is measured in Hz.
――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than
the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.
Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the vertical
frequency to 60Hz using the CDT product before you exchange it with the LCD product.
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC
does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by
referring to the graphics card user manual.
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
31.469
59.940
25.175
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
131
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1366 x 768
47.712
59.790
85.500
+/+
VESA,1440 x 900
55.935
59.887
106.500
-/+
VESA,1600 x 900
60.000
60.000
108.000
+/+
VESA,1680 x 1050
65.290
59.954
146.250
-/+
VESA,1920 x 1080
67.500
60.000
148.500
+/+
132
Chapter 12
Appendix
Contact SAMSUNG WORLD WIDE
――If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
NORTH AMERICA
U.S.A
1-800-SAMSUNG(726-7864)
http://www.samsung.com
CANADA
1-800-SAMSUNG(726-7864)
http://www.samsung.com/ca (English)
http://www.samsung.com/ca_fr (French)
MEXICO
01-800-SAMSUNG(726-7864)
http://www.samsung.com
ARGENTINE
0800-333-3733
http://www.samsung.com
BOLIVIA
800-10-7260
http://www.samsung.com
BRAZIL
0800-124-421
http://www.samsung.com
LATIN AMERICA
4004-0000
CHILE
800-SAMSUNG(726-7864)
http://www.samsung.com/cl
From mobile 02-24 82 82 00
133
LATIN AMERICA
COLOMBIA
01-8000112112
http://www.samsung.com/co
Bogotá: 6001272
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
DOMINICA
1-800-751-2676
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
ECUADOR
1-800-10-7267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
EL SALVADOR
800-6225
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
HONDURAS
800-27919267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
JAMAICA
1-800-234-7267
http://www.samsung.com
NICARAGUA
00-1800-5077267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
PANAMA
800-7267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
PARAGUAY
98005420001
http://www.samsung.com
PERU
0-800-777-08 (Only from landline)
http://www.samsung.com
336-8686 (From HHP & landline)
134
LATIN AMERICA
PUERTO RICO
1-800-682-3180
http://www.samsung.com
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
http://www.samsung.com
URUGUAY
40543733
http://www.samsung.com
VENEZUELA
0-800-100-5303
http://www.samsung.com
AUSTRIA
0810 - SAMSUNG (7267864, € 0.07/min)
http://www.samsung.com
BELGIUM
02-201-24-18
http://www.samsung.com/be (Dutch)
EUROPE
http://www.samsung.com/be_fr (French)
BOSNIA
051 133 1999
http://www.samsung.com
BULGARIA
07001 33 11 , normal tariff
http://www.samsung.com
CROATIA
062 SAMSUNG (062 726 786)
http://www.samsung.com
CYPRUS
8009 4000 only from landline
http://www.samsung.com
(+30) 210 6897691 from mobile and land line
CZECH
800 - SAMSUNG (800-726786)
http://www.samsung.com
Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská
394/17, 180 00, Praha 8 till 8.2.2013 . From 8.2.2013: Samsung
Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4
DENMARK
70 70 19 70
http://www.samsung.com
EIRE
0818 717100
http://www.samsung.com
ESTONIA
800-7267
http://www.samsung.com/ee
135
EUROPE
FINLAND
030-6227 515
http://www.samsung.com
FRANCE
01 48 63 00 00
http://www.samsung.com/fr
GERMANY
0180 5 SAMSUNG bzw.
http://www.samsung.com
0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem
Mobilfunk max. 0,42 €/Min.)
GREECE
80111-SAMSUNG (80111 726 7864) only from land line
http://www.samsung.com
(+30) 210 6897691 from mobile and land line
HUNGARY
06-80-SAMSUNG(726-7864)
http://www.samsung.com
ITALIA
800-SAMSUNG(726-7864)
http://www.samsung.com
LATVIA
8000-7267
http://www.samsung.com/lv
LITHUANIA
8-800-77777
http://www.samsung.com/lt
LUXEMBURG
261 03 710
http://www.samsung.com
MONTENEGRO
020 405 888
http://www.samsung.com
NETHERLANDS
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
http://www.samsung.com
NORWAY
815 56480
http://www.samsung.com
POLAND
0 801-1SAMSUNG(172-678) *
http://www.samsung.com/pl
lub +48 22 607-93-33 **
* (całkowity koszt połączenia jak za 1 impuls według taryfy operatora)
** (koszt połączenia według taryfy operatora)
PORTUGAL
808 20-SAMSUNG(808 20 7267)
http://www.samsung.com
136
EUROPE
ROMANIA
08008 SAMSUNG (08008 726 7864)
http://www.samsung.com
TOLL FREE No.
SERBIA
+381 11 321 6899
http://www.samsung.com
(old number still active 0700 7267864)
SLOVAKIA
0800 - SAMSUNG(0800-726 786)
http://www.samsung.com
SPAIN
902 - 1 - SAMSUNG (902 172 678)
http://www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
http://www.samsung.com
SWITZERLAND
0848 - SAMSUNG(7267864, CHF 0.08/min)
http://www.samsung.com/ch (German)
http://www.samsung.com/ch_fr (French)
U.K
0330 SAMSUNG (7267864)
www.samsung.com
ARMENIA
0-800-05-555
http://www.samsung.com
AZERBAIJAN
088-55-55-555
http://www.samsung.com
BELARUS
810-800-500-55-500
http://www.samsung.com
GEORGIA
0-800-555-555
http://www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500(GSM: 7799)
http://www.samsung.com
KYRGYZSTAN
00-800-500-55-500
http://www.samsung.com
MOLDOVA
0-800-614-40
http://www.samsung.com
MONGOLIA
+7-800-555-55-55
http://www.samsung.com
CIS
137
CIS
RUSSIA
8-800-555-55-55
http://www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
http://www.samsung.com
UKRAINE
0-800-502-000
http://www.samsung.com/ua (Ukrainian)
http://www.samsung.com/ua_ru (Russian)
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com
AUSTRALIA
1300 362 603
http://www.samsung.com
CHINA
400-810-5858
http://www.samsung.com
HONG KONG
(852) 3698 4698
http://www.samsung.com/hk (Chinese)
ASIA PACIFIC
http://www.samsung.com/hk_en (English)
INDIA
1800 3000 8282
http://www.samsung.com/in
1800 266 8282
INDONESIA
0800-112-8888
http://www.samsung.com/id
021-5699-7777
JAPAN
0120-327-527
http://www.samsung.com
MALAYSIA
1800-88-9999
http://www.samsung.com/my
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com
138
ASIA PACIFIC
PHILIPPINES
1-800-10-SAMSUNG(726-7864) for PLDT
http://www.samsung.com/ph
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
SINGAPORE
1800-SAMSUNG(726-7864)
http://www.samsung.com
TAIWAN
0800-329-999
http://www.samsung.com
0266-026-066
THAILAND
1800-29-3232
http://www.samsung.com/th
02-689-3232
VIETNAM
1 800 588 889
http://www.samsung.com
8000-4726
http://www.samsung.com/ae (English)
MENA
BAHRAIN
http://www.samsung.com/ae_ar (Arabic)
EGYPT
08000-726786
http://www.samsung.com
IRAN
021-8255
http://www.samsung.com
JORDAN
800-22273
http://www.samsung.com/Levant (English)
065777444
KUWAIT
183-2255 (183-CALL)
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
MOROCCO
080 100 2255
http://www.samsung.com
139
MENA
OMAN
800-SAMSUNG(726-7864)
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
QATAR
800-2255 (800-CALL)
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
SAUDI ARABIA
9200-21230
http://www.samsung.com/sa (Arabic)
SYRIA
18252273
http://www.samsung.com/Levant (English)
TURKEY
444 77 11
http://www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
http://www.samsung.com
ANGOLA
91-726-7864
http://www.samsung.com
BOTSWANA
0800-726-000
http://www.samsung.com
CAMEROON
7095- 0077
http://www.samsung.com
COTE D’ IVOIRE
8000 0077
http://www.samsung.com
GHANA
0800-10077
http://www.samsung.com
AFRICA
0302-200077
KENYA
0800 545 545
http://www.samsung.com
NAMIBIA
8197267864
http://www.samsung.com
NIGERIA
0800-726-7864
http://www.samsung.com
SENEGAL
800-00-0077
http://www.samsung.com
140
AFRICA
SOUTH AFRICA
0860-SAMSUNG (726-7864 )
http://www.samsung.com
TANZANIA
0685 88 99 00
http://www.samsung.com
UGANDA
0800 300 300
http://www.samsung.com
ZAMBIA
211350370
http://www.samsung.com
141
Responsibility for the Pay Service (Cost to
Customers)
――When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•• If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
•• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.)
•• If a product is reinstalled or devices are connected additionally after installing the purchased
product for the first time.
•• If a product is reinstalled to move to a different spot or to move to a different house.
•• If customer requests instructions on how to use because of another company's product.
•• If customer requests instructions on how to use the network or another company's program.
•• If customer requests software installation and setup for the product.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•• External impact or drop.
•• Use of supplies or separatly sold product unspecified by Samsung.
•• Repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
•• Remodeling or repairing the product by customer.
•• Using it with incorrect voltage or non-authorised electrical connections.
•• Not following the "cautions" in User Manual.
Others
•• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator, Lamp,
Filter, Ribbon, etc.)
――If customer requests a service in case the product has no defect, service fee may be charged. So please
read User Manual first.
•• If a service technician removes/cleans dusts or foreign materials inside of the product.
•• If customer requests an installation additionally after purchasing a product through home-shopping
or online.
142
Correct Disposal
Correct Disposal of This Product (Waste Electrical &
Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of
with other household waste at the end of their working life. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take these items
for environmentally safe recycling.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
The marking on the battery, manual or packaging indicates that the battery in this
product should not be disposed of with other household waste. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or
lead above the reference levels in EC Directive 2006/66.
The battery incorporated in this product is not user replaceable. For information on
its replacement, please contact your service provider. Do not attempt to remove the
battery or dispose it in a fire. Do not disassemble, crush, or puncture the battery. If
you intend to discard the product, the waste collection site will take the appropriate
measures for the recycling and treatment of the product, including the battery.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
143
Optimum Picture Quality and Afterimage Burn-in Prevention
Optimum Picture Quality
•• To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may
degrade if the optimum resolution is not selected.
-- Resolution: 32": HD (1366x768), 40" ~ 75": FHD (1920x1080)
-- Vertical frequency (refresh rate): 46 ~ 75 Hz
•• Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product
performance.
-- The number of sub-pixels by panel type: 6,220,800
•• Run Auto Adjustment to improve the picture quality. If noise is still found even after auto adjustment, adjust Coarse or Fine.
•• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
-- Activate power-saving mode or a dynamic screen saver if you will not be using the product for an extended period of time.
•• Unlike CDT monitors, TFT-LCD monitors (due to the nature of the panel) can be set to only one resolution to obtain the optimum picture quality. Therefore, setting a
resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for
your monitor.
144
Prevention of Afterimage Burn-in
Black Matrix
Common
Electrode (ITO)
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously
changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight
voltage difference may occur between the electrodes in pixels that control the liquid crystals.
Color-Filter
Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner. When this occurs,
a previous image can remain on the screen when the pattern changes. To prevent this, the accumulated voltage difference
should be reduced.
Source
Drain
――The best way to protect the product from afterimage burn-in is switching the power off or setting the PC or system to run a
screen saver when not in use. Also, Warranty service may be limited depending on instruction guide.
Gate
TFT
Data Bus-Line
Pixel Electrode (ITO)
Storage
Capaccitor (Cs)
•• Powering Off, Screen Saver and Power Saving Mode
-- Power off the product for 4 hours after using it for 20 hours.
-- Power off the product for 2 hours after using it for 12 hours.
-- Go to Display Properties > Power Supply on your PC and set the product to power off as required.
-- Using a screen saver is recommended.
It is best to use a single-color or moving-image screen saver.
•• Regular color Change
-- Use 2 colors
Switch between 2 colors every 30 minutes as shown above.
Type 1
Type 2
FLIGHT
TIME
FLIGHT
TIME
OZ348
20:30
OZ348
20:30
UA102
21:10
UA102
21:10
145
•• Avoid combinations of a text color and background color of contrasting brightness.
――Avoid using grey as it may contribute to afterimage burn-in.
――Avoid using colors of contrasting brightness (black and white; grey).
FLIGHT : TIME
FLIGHT : TIME
OZ348 : 20:30
OZ348 : 20:30
•• Regular Text color Change
-- Use bright colors of similar brightness.
Interval: Change text color and background color every 30 minutes
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
-- Move and change text every 30 minutes as shown below.
FLIGHT
: TIME
FLIGHT
: TIME
OZ348
: 20:30
OZ348
: 20:30
[ Step 1 ]
[ Step 2 ]
[ Step 3 ]
-- Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
146
License
DivX Certified Ⓡ to play DivX Ⓡ video up to HD 1080p, including premium
content.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
®
Premium Sound 5.1
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380,
5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723,
7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and
the Symbol together are registered trademarks & DTS Premium Sound | 5.1 is a
trademark of DTS, Inc. ⓒ2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
DivXⓇ, DivX CertifiedⓇ and associated logos are trademarks of DivX, Inc. and
are used under license.
ABOUT DIVX VIDEO: DivXⓇ is a digital video format created by DivX, Inc. This is an official DivX
CertifiedⓇ device that plays DivX video. Visit www.divx.com for more information and software tools to
convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX CertifiedⓇ device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD
section in your device setup menu. Go to vod.divx.com for more information on how to complete your
registration.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
Open Source Licence Notice is written only English.
147
Terminology
480i / 480p / 720p / 1080i /
1080p____ Each of the scanning
rates above refers to the number of
effective scanning lines that decides
the screen resolution. The scanning
rate may be indicated in i (interlaced)
or p (progressive), depending on the
scanning method.
- Scanning
Scanning refers to a process of sending
pixels that form an image progressively.
A larger number of pixels will deliver a
clearer and more vivid picture.
- Progressive
In progressive scan mode, all lines
of pixels are scanned one by one
(progressively) on the screen.
- Interlaced
In interlaced scan mode, every other
line of pixels is scanned from top to
bottom first and then the remaining
lines of pixels (that were not scanned)
are scanned.
Non-interlace Mode and Interlace
Mode____ Non-interlace mode
(progressive scan) displays a horizontal
line from the top to the bottom of a
screen progressively. Interlace mode
displays the odd number lines first
and the even number lines next. Noninterlace mode is mainly used in
monitors as it produces screen clarity
and interlace mode is mainly used in
TVs.
Dot Pitch____ The product and screen
consist of red, green and blue dots.
A shorter distance between the dots
produces a higher resolution. Dot pitch
refers to the distance between the
shortest distance between dots of the
same color. Dot pitch is measured in
millimeters.
Vertical Frequency____ The product
displays a single image many times
per second (like a fluorescent light that
flickers) to display an image for a viewer
to see. The rate of a single image being
displayed repeatedly per second is
called vertical frequency or refresh rate.
Vertical frequency is measured in Hz.
E.g. 60Hz refers to a single image being
displayed 60 times in one second.
Horizontal Frequency____ The time
required to scan a single line from the
left to the right side of the screen is
called a horizontal cycle. The reciprocal
number of a horizontal cycle is called
horizontal frequency. Horizontal
frequency is measured in kHz.
Source____ Input source refers to a
video source device connected to the
product such as a camcorder or video
or DVD player.
Plug & Play____ Plug & Play is a
function that allows the automatic
exchange of information between a
monitor and PC to produce an optimum
display environment. The product uses
VESA DDC (international standard) to
execute Plug & Play.
Resolution____ Resolution is the
number of horizontal dots (pixels) and
vertical dots (pixels) that form a screen.
It represents the level of display detail.
A higher resolution enables more
data to be displayed on the screen
and is useful to perform multiple tasks
simultaneously.
E.g. A resolution of 1920 X 1080 consists
of 1,920 horizontal pixels (horizontal
resolution) and 1,080 vertical pixels
(vertical resolution).
HDMI (High Definition Multimedia
Interface)____ It is an interface that
can be connected to a digital audio
source as well as a high-definition video
source by using a single cable without
compression.
Multiple Display Control (MDC)____
MDC (Multiple Display Control) is an
application that allows multiple display
devices to be controlled simultaneously
using a PC. Communication between
a PC and monitor takes place using
RS232C (serial data transmission) and
RJ45 (LAN) cables.
148
Download PDF