Samsung | TS220C | Samsung Samsung Thin Client Monitor TS220C LED Benutzerhandbuch

User Manual
SyncMaster
TS190C
TS220C
TS240C
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00169B-07
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2011 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.

An administration fee may be charged if either

(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).

(b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).

The amount of such administration charge will be advised to you before any work or home visit is
carried out.
Before Using the Product
2
Before Using the Product
Icons used in this manual
The following images are for reference only. Real-life situations may
differ from what is shown in the images.
Symbols for safety precautions
A serious or fatal injury may result if instructions are not followed.
Warning
Caution
Personal injury or damage to properties may result if instructions are
not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product
3
Before Using the Product
Cleaning
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cable from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.

Do not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
!

Do not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cable to the product after cleaning the product.
6. Power on the monitor and computer.
!
Before Using the Product
4
Before Using the Product
Securing the Installation Space

Ensure some space around the product for ventilation. An internal temperature rise may cause fire
and damage the product. Be sure to allow the amount of space as shown below or greater when
installing the product.
The exterior may differ depending on the product.
10 cm
10 cm
10 cm
10 cm
10 cm
Precautions for storage
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
Be sure to contact Samsung Customer Service Center (108page) if the inside of the monitor needs
cleaning. (Service fee will be charged.)
Before Using the Product
5
Before Using the Product
Safety Precautions
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cable or plug, or a loose power socket.

An electric shock or fire may result.
Do not plug many products into the same power socket.

Otherwise, the socket may overheat and cause a fire.
Do not touch the power cable with wet hands.

Otherwise, an electric shock may result.
Insert the power cable all the way in so it is not loose.

An unstable connection may cause a fire.
!
Ensure you connect the power cable to a grounded power socket. (type 1
insulated devices only).
!

An electric shock or injury may result.
Do not bend or pull the power cable with force. Do not weigh the power cable
down with a heavy object.

A damaged power cord may cause an electric shock or fire.
Do not place the power cable or product near heat sources.

An electric shock or fire may result.
If the power cable pins or power outlet is covered with a foreign substance (dust,
etc.), wipe it off using a dry cloth.
!

Otherwise, a fire may result.
Before Using the Product
6
Before Using the Product
Caution
Do not unplug the power cable when the product is in use.

The product may become damaged by an electric shock.
Do not use the power cable for products other than authorized products supplied
by Samsung.

!
An electric shock or fire may result.
Keep the power socket where the power cable is connected unobstructed.

If any problem occurs in the product, unplug the power cable to completely
cut the power to the product.
!
Power to the product cannot be completely cut off with the power switch.
Hold the plug when disconnecting the power cable from the power socket.

An electric shock or fire may result.
!
Installation and Safety
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.

Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a
bookshelf or wall closet.

Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached
by children.
!

Children may suffocate.
Before Using the Product
7
Before Using the Product
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.).

The product may fall and break or cause a personal injury.

Using the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.

!
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.

Otherwise, the product lifespan may be reduced, or a fire may result.
Do not install the product within the reach of young children.

The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not install
the product in a kitchen or near a kitchen counter.
Caution
Take care not to drop the product when moving it.

Otherwise, product failure or personal injury may result.
!
Do not set down the product on its front.

The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.

The product may fall and break or cause a personal injury.

Install the product only on cabinets or shelves of the right size.
Before Using the Product
8
Before Using the Product
Put down the product carefully.

The product may fall and break or cause a personal injury.
!
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport or train
station where the product should operate continuously for an extended period of
time) may seriously affect its performance.

Be sure to consult Samsung Customer Service Center (108page) before
installation if you want to install the product at such a place.
Operation and Safety
Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or
modify the product on your own.

An electric shock or fire may result.

Contact Samsung Customer Service Center (108page) for repair.
Before moving the product, turn off the power switch and disconnect the power
cable and all other connected cables.
!

Otherwise, the power cord may be damaged and a fire or electric shock may
result.
If the product generates a strange noise, a burning smell, or smoke, remove the
power cable immediately and contact Samsung Customer Service Center
(108page).
!

An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.

The product may fall, and your child may become injured or seriously
harmed.
If the product falls or the exterior is damaged, power off the product, remove the
power cable, and contact Samsung Customer Service Center (108page).

Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.

The product or heavy objects may fall as children try to reach for the toy or
sweets resulting in a serious injury.
Before Using the Product
9
Before Using the Product
During a lightning or thunderstorm, power off the product and remove the power
cable.

!
An electric shock or fire may result.
Do not drop objects on the product or apply impact.

An electric shock or fire may result.
!
Do not move the product by pulling the power cable or any cable.

Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
If a gas leakage is found, do not touch the product or power cable. Also, ventilate
the area immediately.
!
GAS

Sparks can cause an explosion or fire.

During a lightning or thunderstorm, do not touch the power cable or antenna
cable.
Do not lift or move the product by pulling the power cable or any cable.

Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
Do not use or keep combustible spray or an inflammable substance near the
product.
!

An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.

Otherwise, a fire may result from an increased internal temperature.
Before Using the Product
10
Before Using the Product
100
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable
object (paper, match, etc.) into the vent or ports of the product.

If water or any foreign substance enters the product, be sure to power off the
product, remove the power cable, and contact Samsung Customer Service
Center (108page).

Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.

If water or any foreign substance enters the product, be sure to power off the
product, remove the power cable, and contact Samsung Customer Service
Center (108page).

Product failure, an electric shock or fire may result.
Caution
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.

!
If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
-_!
Disconnect the power cable from the power socket if you do not plan on using
the product for an extended period of time (vacation, etc.).

Otherwise, a fire may result from accumulated dust, overheating, an electric
shock, or electric leakage.
Use the product at the recommended resolution and frequency.

Your eyesight may deteriorate.
!
Do not put DC power adapters together.

Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.

Otherwise, a fire may result.
Before Using the Product
11
Before Using the Product
Do not let water enter the DC power adapter or get the adapter wet.

An electric shock or fire may result.

Avoid using the product outdoors where it can be exposed to rain or snow.

Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.

Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
!
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
!
Do not hold the monitor upside-down or move it by holding the stand.

The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.

An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.

Eye fatigue will be relieved.
!
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
!
Exercise caution when adjusting the product angle or stand height.
!

Otherwise, children's fingers or hands may become stuck and injured.

Tilting the product excessively may cause it to fall and result in personal
injury.
Before Using the Product
12
Before Using the Product
Do not place heavy objects on the product.

Product failure or personal injure may result.
Do not increase the volume too high when using headphones (earphones).

Sound particularly at a higher volume could potentially affect long-term
hearing.
Correct posture to use the product
Use the product in the correct posture as follows:

Straighten your back.

Allow a distance of 45 to 50cm between your eye and the screen, and look slightly
downward at the screen.
Keep your eyes directly in front of the screen.

Adjust the angle so light does not reflect on the screen.

Keep your forearms perpendicular to your upper arms and level with the back of
your hands.

Keep your elbows at about a right angle.

Adjust the height of the product so you can keep your knees bent at 90 degrees or
more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product
13
Table Of Contents
BEFORE USING THE
PRODUCT
PREPARATIONS
USING "ZERO CLIENT"
2
Copyright
3
3
Icons used in this manual
Symbols for safety precautions
4
Cleaning
4
5
5
Cleaning
Securing the Installation Space
Precautions for storage
6
Safety Precautions
6
7
9
Electricity and Safety
Installation and Safety
Operation and Safety
13
Correct posture to use the product
19
Checking the Contents
19
20
Removing the Packaging
Checking the Components
21
Parts
21
23
24
Frontal Buttons
Reverse Side
Right Side View
25
Installation
25
26
26
27
28
Attaching the Stand
Adjusting the Product Tilt and Height
Rotating the Monitor
Installing a Wall-mount Kit or Desktop Stand
Anti-theft Lock
29
About "Zero Client"
Table Of Contents
14
Table Of Contents
CONNECTING AND USING
A SOURCE DEVICE
SCREEN SETUP
30
Connection to Use the "Zero Client"
30
30
31
31
32
Connection Using the D-SUB Cable (Analogue
Type)
Connection Using the DVI Cable
Connecting to Headphones or Speakers
Connecting a Microphone
Connecting to a Server (LAN/USB Connection)
33
Using the "Zero Client"
33
33
34
Login
Message Box
Toolbar
57
Before Connecting
57
Pre-connection Checkpoints
58
Connecting and Using a PC
58
60
61
62
Connecting to a PC
Driver Installation
Setting Optimum Resolution
Changing the Resolution Using a PC
65
Connecting the Power
66
Brightness
66
Configuring Brightness
67
Contrast
67
Configuring Contrast
68
Sharpness
68
Configuring Sharpness
69
SAMSUNG MAGIC Bright
69
Configuring SAMSUNG MAGIC Bright
70
SAMSUNG MAGIC Angle
70
Configuring SAMSUNG MAGIC Angle
71
Coarse
71
Adjusting Coarse
Table Of Contents
15
Table Of Contents
CONFIGURING TINT
RESIZING OR
RELOCATING THE
SCREEN
SETUP AND RESET
72
Fine
72
Adjusting Fine
73
SAMSUNG MAGIC Color
73
Configuring SAMSUNG MAGIC Color
74
Red
74
Configuring Red
75
Green
75
Configuring Green
76
Blue
76
Configuring Blue
77
Color Tone
77
Configuring the Color Tone Settings
78
Gamma
78
Configuring Gamma
79
H-Position & V-Position
79
Configuring H-Position & V-Position
80
Image Size
80
Changing the Image Size
81
Menu H-Position & Menu V-Position
81
Configuring Menu H-Position & Menu VPosition
82
Reset
82
Initializing Settings (Reset)
83
Language
83
Changing the Language
84
Off Timer On/Off
84
Configuring Off Timer On/Off
Table Of Contents
16
Table Of Contents
INFORMATION MENU AND
OTHERS
INSTALLING THE
SOFTWARE
TROUBLESHOOTING
GUIDE
85
Off Timer Setting
85
Configuring Off Timer Setting
86
PC/AV Mode
86
Configuring PC/AV Mode
87
Key Repeat Time
87
Configuring Key Repeat Time
88
Customized Key
88
Configuring Customized Key
89
Auto Source
89
Configuring Auto Source
90
Display Time
90
Configuring Display Time
91
Menu Transparency
91
Changing Menu Transparency
92
INFORMATION
92
Displaying INFORMATION
92
Configuring Brightness in the Initial
Screen
93
Natural Color
93
What is Natural Color?
94
MultiScreen
94
95
Installing the Software
Removing the Software
96
Requirements Before Contacting
Samsung Customer Service Center
96
96
96
Testing the Product
Checking the Resolution and Frequency
Check the following.
99
Q&A
Table Of Contents
17
Table Of Contents
SPECIFICATIONS
APPENDIX
101
General
103
PowerSaver
104
Standard Signal Mode Table
108
Contact SAMSUNG WORLDWIDE
113
Correct Disposal
113
113
Correct Disposal of This Product (Waste
Electrical & Electronic Equipment)
Correct disposal of batteries in this product
114
Terminology
INDEX
Table Of Contents
18
1
1.1
Preparations
Checking the Contents
1.1.1 Removing the Packaging
1
Open the packaging box. Be careful not to damage the product when you open the packaging with
a sharp instrument.
2
Remove the styrofoam from the product.
3
Check the components and remove the styrofoam and plastic bag.
4

The appearance of actual components may differ from the image shown.

This image is for reference only.
Store the box in a dry area so that it can be used when moving the product in the future.
1 Preparations
19
1
Preparations
1.1.2 Checking the Components

Contact the dealer from whom you purchased the product if any item is missing.

The appearance of the components and items sold separately may differ from the image shown.
Components
Quick setup guide
Warranty card
User manual
(Not available in all locations)
Power cable
DC power adapter
Stand base
DVI cable
Power extension cable
(DC 14V)

Components may vary depending on the country.

The stand base supplied with this product contains a circuit board. Care should be taken when
handling the base.
Items sold separately
The following items can be purchased at your nearest retailer.
HDMI-DVI cable
D-SUB cable
1 Preparations
20
1
1.2
Preparations
Parts
1.2.1 Frontal Buttons
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Icons
Description

Open or close the onscreen display (OSD) menu, or return to the
parent menu.

OSD control lock: Maintain the current settings, or lock the OSD
control to prevent unintended changes to settings.
To lock the OSD control, press the MENU button [
] for five
seconds.
To unlock the locked OSD control, press the MENU button [
]
for more than five seconds.
If the OSD control is locked,

Brightness and Contrast can be adjusted, and INFORMATION
can be viewed.

The Customized Key function can be used by pressing the [
]
button. (The Customized Key function specified before the OSD
control was locked is available even when the OSD control is
locked.)
1 Preparations
21
1
Preparations
Icons
Description
Configure Customized Key and press [
be enabled.
SAMSUNG
MAGICAngle
]. The following options will
SAMSUNG
- MAGIC
Bright - Image Size
To configure Customized Key, go to SETUP&RESET
→
Customized Key and select the mode you want.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Adjust the screen brightness.
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will
change the input source (Digital/Analog). If you power on the product or
change the input source by pressing the [
] button, a message that
shows the changed input source will appear at the top left corner of the
screen.
Press the [AUTO] button to automatically adjust the screen settings.
AUTO

Available only in Analog mode.

Changing the resolution in Display Properties will activate the
Auto Adjustment function.
Turn the screen on or off.
The power indicator will be lit when the product is operating normally.

Refer to "11.2 PowerSaver"for details about the power-saving
function.

To reduce power consumption, it is best to remove the power
cable when you will not be using the product for an extended
period of time.
(Power lamp)
Power on or off the product.
1 Preparations
22
1
Preparations
1.2.2 Reverse Side
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
LAN
AUDIO OUT
RGB OUT
Port
DVI OUT
DC 14V OUT DC 14V IN
Description
Connect to a USB device.
Connect to a network using the LAN cable.
Connect to an audio output device such as headphones.
Connect to the monitor using the D-SUB cable.
Connect to the monitor using the DVI cable.
[DC 14V OUT]
[DC 14V IN]
Connect to the
extension cable.
[DC 14V] port on the monitor using the power
Connect to the DC power adapter.
1 Preparations
23
1
Preparations
1.2.3 Right Side View
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
DVI IN
RGB IN
DC 14V
Port
MIC
Description
Connect to a PC or the stand base using the DVI cable.
Connect to a PC or the stand base using the D-SUB cable.
Connect to
[DC 14V OUT] on the stand base using a power
extension cable.
[
]
[MIC]
Connect to an audio output device such as headphones.
Connect to a microphone.
Connect to a USB device.
1 Preparations
24
1
1.3
Preparations
Installation
1.3.1 Attaching the Stand
Place a protective cloth or
cushion on a flat surface. Next,
place the product with the face
down on top of the cloth or
cushion.
Insert the stand base into the
stand in the direction of the
arrow.
Do not remove the fixing pin until
you are finished attaching the
stand.
Fasten the screw tightly (using a
screwdriver or coin) into the
bottom of the stand base.
After installing the stand, place
the product upright.
You can remove the fixing pin
and adjust the stand now.
- Caution
Do not hold the product upside
down only by the stand.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
1 Preparations
25
1
Preparations
1.3.2 Adjusting the Product Tilt and Height
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.

To adjust the height, remove the fixing pin.

The monitor tilt and height can be adjusted.

Hold the top center of the product and adjust the height carefully.
1.3.3 Rotating the Monitor
You can rotate your monitor as shown below.

Be sure to fully extend the stand before rotating the monitor.

If you rotate the monitor without fully extending the stand, the corner of the monitor may hit the
floor and get damaged.

Do not rotate the monitor counterclockwise. The monitor may get damaged.
1 Preparations
26
1
Preparations
1.3.4 Installing a Wall-mount Kit or Desktop Stand
Before Installation
Power the product off and remove the power cable from the power socket.
Place a protective cloth or
cushion on a flat surface. Next,
place the product with the face
down on top of the cloth or
cushion.
Unfasten the screw from the
back of the product.
Lift and detach the stand.
Installing a Wall-mount Kit or Desktop Stand
2
1
A
3
4
B
A Attach the wall-mount kit or desktop stand here
B Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
1 Preparations
27
1
Preparations
Notes

Using a screw longer than the standard length can damage the internal components of the
product.

The length of screws required for a wall mount that does not comply with the VESA standards may
vary depending on the specifications.

Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws
or attaching the wall-mount kit or desktop stand using excessive force.

Samsung shall not be held liable for any product damage or personal injury caused by using a wallmount kit other than the one specified or from an attempt to install the wall-mount kit on your own.

To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm
or farther away from the wall.

Be sure to use a wall-mount kit that complies with the standards.
1.3.5 Anti-theft Lock
An anti-theft lock allows you to use the product securely even in public places. The locking device shape
and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft
locking device for details. The lock device is sold separately.
To lock an anti-theft locking device:
1
2
3
4
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
Put one end of the cable through the loop on the other end.
Insert the locking device into the anti-theft lock slot at the back of the product.
Lock the locking device.

An anti-theft locking device can be purchased separately.

Refer to the user guide provided with your anti-theft locking device for details.

Anti-theft locking devices can be purchased at electronics retailers or online.
1 Preparations
28
2
2.1
Using "Zero Client"
About "Zero Client"
The "Zero Client" uses a Linux operating system. When the Client connects to a server where the Citrix
XendDesktop/XenApp service is available, information relating to the keyboard, mouse, audio/video and
display data is transmitted from the Client to the server over the network.
Compatible servers

Citrix XenDesktop/XenApp server

Microsoft Windows 2000/2003/2008 server where the Terminal Service and Citrix XenServer
are installed
2 Using "Zero Client"
29
2
2.2
Using "Zero Client"
Connection to Use the "Zero Client"
2.2.1 Connection Using the D-SUB Cable (Analogue Type)
RGB IN
1
RGB OUT
Connect the D-SUB cable to [RGB IN] on the back of the monitor and [RGB OUT] on the stand
base.
2
Connect the DC power adapter to the product and a power outlet. Next, turn on the power switch
on the stand base.
(For details, refer to "3.3 Connecting the Power".)
3
Press [
] to change the input source to Analog.
2.2.2 Connection Using the DVI Cable
DVI IN
1
2
DVI OUT
Connect the DVI cable to [DVI IN] on the back of the monitor and [DVI OUT] on the stand base.
Connect the DC power adapter to the product and a power outlet. Next, turn on the power switch
on the stand base.
(For details, refer to "3.3 Connecting the Power".)
3
Press [
] to change the input source to Digital.
2 Using "Zero Client"
30
2
Using "Zero Client"
2.2.3 Connecting to Headphones or Speakers
AUDIO OUT
1
Connect an audio output device (headphones, speakers, etc.) to the [AUDIO OUT] port on the back
or the [
] port on the side of the stand base.
2.2.4 Connecting a Microphone
MIC
1
Connect the microphone to [MIC] on the right side of the stand base.
2 Using "Zero Client"
31
2
Using "Zero Client"
2.2.5 Connecting to a Server (LAN/USB Connection)
LAN
1
Connect the [LAN] port on the back of the stand base to the server using the LAN cable.
It is not supported when the network speed is below or equal to 10Mbps.
2
Connect USB devices (keyboard, mouse, etc.) to [ ] on the back or right side of the stand base.
(To use the [ ] port, ensure the Client is connected to the server.)
2 Using "Zero Client"
32
2
2.3
Using "Zero Client"
Using the "Zero Client"
2.3.1 Login

Username : Enter the user name that will be used to connect to the "Citrix" server.

Password : Enter the password that will be used to connect to the "Citrix" server.

Domain : Enter the domain that will be used to connect to the "Citrix" server.
Ensure Broker Server is enabled under Network.
2.3.2 Message Box
MagicRMS
When the MagicRMS server is on, messages received from the server are displayed on the screen.
Message
The Identity function of MagicRMS allows you to check the host name of the Client.
2 Using "Zero Client"
33
2
Using "Zero Client"
Identity
The Identity function of MagicRMS allows you to check the host name of the Client.
Disconnect Message
If the Client is disconnected from the network, a message will appear indicating the disconnection. In this
case, if you are logged on, the desktops/applications connected will disconnect and log off.
2.3.3 Toolbar
Network
You can view or configure the network and server settings for the Client.
2 Using "Zero Client"
34
2
Using "Zero Client"
Local Network
You can configure the IP to connect the Client to a network.

Link Speed & Duplex : Select a network connection type and speed.

To use a static IP, deselect Enable DHCP and specify the IP.

To use DHCP, select Enable DHCP.
Name Servers
Configure the DNS Domain and DNS Server information on the Client.

Specify the DNS Domain.

Specify the DNS Servers. More than one DNS Server can be entered using “,”. e.g.)
192.168.0.1,192.168.1.1
DHCP Options
2 Using "Zero Client"
35
2
Using "Zero Client"
To automatically configure several settings for the Client all at once using DHCP upon boot up, configure
the DHCP Options IDs.

Ensure the setting is specified between 128 and 254.

If this option is configured, the setting specified will replace the customized setting.
Requirements

Local Network must be set to Enable DHCP.

Information about the Options IDs must be configured on the DHCP server.
Security
Client provides a security function using IEEE802.1x authentication.
Available modes

EAP-PEAP (MSCHAPv2, PEAP version Automatic)

EAP-TLS
To use this function, select Enable IEEE802.1x Authentication and specify the Authentication mode.
1
EAP-PEAP
To use EAP-PEAP mode, set the Authentication mode to EAP-PEAP.
Click Properties, and enter the Username and Password for authentication.
2 Using "Zero Client"
36
2
Using "Zero Client"
2
EAP-TLS
To use EAP-TLS mode, set the Authentication mode to EAP-TLS.
Click Properties, and configure the following settings for authentication. To select a certificate,
ensure you copy the authentication file to the Client using Certification Management.
3
a.
Enter the Identity information.
b.
Select a CA certificate file (*.der, *.pem, *.crt, *.cer).
c.
Select a Private key file.
d.
Enter the Private key password.
Certification Management
For you to manage authentication files that are used in EPA-TLS mode, the following menu options
are provided.
a.
An option for copying a file using several methods including USB Storage (The file will be
copied to a specific directory on the Client. )
b.
An option for deleting a saved file
Broker Server
Enter information to connect to the Citrix server.
2 Using "Zero Client"
37
2
Using "Zero Client"

Enter the IP address of the Citrix server.

Specify the Default Username and Default Domain that will be used to connect to the server.
Remote Management
You can configure the settings for servers that manage the Client, enter information about the servers, or
view the status of the servers.
For details on the MagicRMS function, refer to the MagicRMS user manual.
1
File Server
Configure the FTP server to connect to in order to upgrade the firmware on the Client. The
information configured will be used to upgrade the firmware when the Client boots up.

Address : Enter the IP address of the FTP server.

Path : Enter the Path of the FTP server where the new firmware is saved.

Username : Enter the Username that will be used to connect to the FTP server.

Password : Enter the Password that will be used to connect to the FTP server.
Requirements
2

Ensure the FTP server is working properly.

The new firmware must be in a compatible file format.
MagicRMS Connection
Enter the Connection information to connect to the MagicRMS server.
2 Using "Zero Client"
38
2
Using "Zero Client"

Multicast
Enable this option if you want to automatically connect to the MagicRMS server. Specify the IP
Address and Port number for Multicast. If the MagicRMS server is assigned with the same IP
address and port number as the Client, it will automatically connect to the Client.

Server Assignment
If you know the static IP address and port number of the MagicRMS server, you can manually
enter them to connect to the server.
3
MagicRMS Contact
Enter information to identify the Client on the MagicRMS console.
2 Using "Zero Client"
39
2
Using "Zero Client"
4
MagicRMS Status
You can check the connection status of the MagicRMS server. If there are connection issues, check
the server connection and select Start, Stop, or Restart to start the server.
To view details of the MagicRMS server logs, click View Log.
2 Using "Zero Client"
40
2
Using "Zero Client"
5
Network Tools
Network Tools can be used to check the connection status between the Client and network.

Ping
Using the Ping command, you can check the status of the network connection for the IPs
entered.

Trace Route
Using the Route command, you can check the network connection status for the IPs entered.
2 Using "Zero Client"
41
2
Using "Zero Client"
Terminal Properties
Configure the properties of the Client.
System
1
General

Terminal Name : Change the Client name. The default name is “TS_ + MAC information."

Reset the system setting to factory default : Reset the Client settings by selecting the
checkbox.
Select Yes in the Notice window that appears after selecting the checkbox. The settings will be
reset.
2
Power Management
2 Using "Zero Client"
42
2
Using "Zero Client"

Control the power supply to the Client by changing the Screen Off setting. The Client will
activate Power Management if it is left idle for a specified amount of time.
The following time settings are available to choose from.
3

Never

5 minutes

10 minutes

30 minutes

1 hour

2 hours
Time/Date
Set the clock on the Client.
2 Using "Zero Client"
43
2
Using "Zero Client"

Time Zone
Enter the Time Zone information to apply to the Client. Click Change, and select the time zone
desired.
To enable DayLight Saving, select the Enable DayLight Saving checkbox and select the
number of hours to apply.

Time/Date Format

Time Format / Date Format : Specify the format to display the time and date on the
toolbar.

Time Servers : Enter the Time Server information provided online. The time and date on
the Client will automatically be set.
Display
Configure the settings for display devices connected to the Client.
2 Using "Zero Client"
44
2
Using "Zero Client"
1
Orientation
Configure the screen orientation of the selected display device.
You can select Horizontal or Vertical.
2
Resolution
Set the resolution of the selected display device.
The resolutions available vary depending on the display device.
3
Multiple Display
When two display devices are connected to the Client, specify how you will use the screens.

To display the same desktop on the displays, select Clone. When Clone is selected, the same
Orientation and Resolution will be applied to the displays.
2 Using "Zero Client"
45
2
Using "Zero Client"

To display an extended desktop on the two displays, select Extend.
The display selected as the primary screen will be placed on the left.
To set the selected display as the primary screen, select the Set as the main screen
checkbox.
2 Using "Zero Client"
46
2
Using "Zero Client"
When only one display device is connected, the Multiple Display option is disabled.
Toolbar
Select whether to display the toolbar or enable the shortcut keys on the Client.

Always hide toolbar
Hide the toolbar on the screen: select the checkbox and minimize the toolbar. To unhide the toolbar,
press the corresponding shortcut key.

Disable hotkey(CTRL-ALT-UP) to invoke toolbar
Shrink the toolbar by pressing the corresponding shortcut key (CTRL-ALT-UP). To expand the
toolbar, click the arrow button on the minimized toolbar.
The two options above cannot be enabled at the same time.
Sound
Adjust the sound on the Client.

Volume : Adjust the volume using the scrollbar.

Mute : Mute the sound.
2 Using "Zero Client"
47
2
Using "Zero Client"
Input
1
Keyboard
You can configure the keyboard settings for the Client.
2

Character Set : Specify the character encoding method to use on the Client.

Keyboard Language : Specify the keyboard language.

Repeat Rate : Specify the keyboard sensitivity.
Mouse
You can configure the mouse settings for the Client.

Mouse Speed : Configure the mouse movement sensitivity.

Buttons : Activate the left-handed mouse mode.
Printer
1
LPDs
Configure the LPD-type printer settings.
2 Using "Zero Client"
48
2
Using "Zero Client"
2
SMBs
Configure the SMB-type printer settings.
Information
You can view the Client information.
General

Firmware : View the version of the firmware on the Client.

Checksum : View the checksum of the firmware on the Client.

Citrix Receiver : View the version of the Citrix Receiver used on the Client.
2 Using "Zero Client"
49
2
Using "Zero Client"

Terminal Name : View the Terminal Name of the Client.
Hardware

CPU : View information about the CPU on the Client.

CPU Busy : View the current CPU usage on the Client.

Memory size : View the total amount of memory on the Client.

Free Memory : View the amount of memory currently available on the Client.

Resolution : View the display resolution configured on the Client.

System up Time : View the amount of time the Client has been running.
Network

IP Address : View the IP information configured on the Client.

Subnet Mask : View the subnet mask configured on the Client.

Default Gateway : View the Default Gateway configured on the Client.

DHCP Lease : View the amount of time (in seconds) it takes for an IP address to be assigned when
the Client uses DHCP.

Speed & Duplex : View the speed and duplex information of the link that is used when the Client
connects to a network.
2 Using "Zero Client"
50
2
Using "Zero Client"

Mac Address : View the Mac Address of the network adapter on the Client.
Open Source Notice
You can view details of the Open Source components used on the Client.
Open source license notice
In the case of using open source software, Open Source licenses are available on the product
menu.
Open Source License Notice is written only English.
Shutdown
You can log off, close, or restart the Client.
2 Using "Zero Client"
51
2
Using "Zero Client"
1
Log-off from account “***”
Log off from the Client if you are logged on. This option is enabled only when you are logged on to
the Client. To log off, select Yes in the Notice window.
2
Shutdown the system
You can close the Client. To close the Client, select Yes in the Notice window.
3
Restart the system
You can restart the Client. To restart the Client, select Yes in the Notice window.
2 Using "Zero Client"
52
2
Using "Zero Client"
Remote Desktop
You can view a list of desktops and applications (on the Citrix Server) the Client can connect to when
logged on.
2 Using "Zero Client"
53
2
Using "Zero Client"
Desktop List
1
Connect
You can connect to a desktop or application on the list by clicking the corresponding Connect
button or double-clicking the desktop or application desired.
When a connection to a desktop or application is established, the Connect button for the desktop or
application will be replaced by the Disconnect button in the Desktop List. The corresponding
desktop or application row in the list will be highlighted as shown below.
You can connect to more than one desktop or application. The names of the desktops and
applications connected will be highlighted.
2
Disconnect
The Disconnect button disconnects the corresponding desktop or application connected. When
the desktop or application is disconnected, a list of connected desktops or applications will appear if
there are any.
3
Refresh
To update the Desktop List that contains a list of desktops or applications on the Citrix Server, click
Refresh.
2 Using "Zero Client"
54
2
Using "Zero Client"
4
Reconnect
You can display desktops and applications that are not displayed even though they are connected
to the Client. Double-click the desktop or application desired. The corresponding desktop or
application row in the list will be highlighted.
e.g.) Double-click Memo. A notepad window will be displayed.
Status Icon
Network icon: Display the current network status using an icon.
1
Not connected to the network.
2
Attempting to connect to the network.
3
Connected to the network.
2 Using "Zero Client"
55
2
Using "Zero Client"
Terminal Lock
This menu locks the Network and Terminal Properties options so that their settings cannot be
changed.
The corresponding shortcut key is [CTRL + ALT + F6].

How to lock the two options
Press and hold the shortcut key for a specified time (about 8 seconds).
When the lock is on, the options locked will be indicated on the toolbar as shown below.

How to unlock the two options
Press and hold the shortcut key for a specified time (about 8 seconds).
Note that you are prompted to enter the password in order to unlock the two options.
2 Using "Zero Client"
56
3
3.1
Connecting and Using a Source Device
Before Connecting
3.1.1 Pre-connection Checkpoints

Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.

Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.

Check the types of ports at the back of the product you want to connect.
3 Connecting and Using a Source Device
57
3
3.2
Connecting and Using a Source Device
Connecting and Using a PC
3.2.1 Connecting to a PC

Select a connection method suitable for your PC.
Connecting parts may differ in different products.
Connection Using the D-SUB Cable (Analogue Type)
RGB IN
1
Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the
PC.
2
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC.
(For details, refer to "3.3 Connecting the Power".)
3
Press [
] to change the input source to Analog.
Audio is not available if the PC and product are connected via the [D-SUB] port.
Connection Using the DVI Cable
DVI IN
1
2
Connect the DVI cable to the [DVI IN] port on the back of the product and the DVI port on the PC.
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC.
(For details, refer to "3.3 Connecting the Power".)
3
Press [
] to change the input source to Digital.
Audio is not available if the PC and product are connected via the [DVI] port.
3 Connecting and Using a Source Device
58
3
Connecting and Using a Source Device
Connection Using an HDMI-DVI Cable
DVI IN
1
2
Connect the DVI cable to the [DVI IN] port on the back of the product and the HDMI port on the PC.
Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC.
(For details, refer to "3.3 Connecting the Power".)
3
Press [
] to change the input source to Digital.
Audio is not available if the PC and product are connected via the [DVI] port.
3 Connecting and Using a Source Device
59
3
Connecting and Using a Source Device
3.2.2 Driver Installation

You can set the optimum resolution and frequency for this product by installing the corresponding
drivers.

An installation driver is contained on the CD supplied with the product.

If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and
download the file.
1
2
3
4
Insert the user manual CD provided with the product into the CD-ROM drive.
5
Go to Display Properties and check that the resolution and refresh rate are appropriate.
Click "Windows Driver".
Follow the instructions given on the screen to proceed with installation.
Select your product model from the list of models.
Refer to your Windows OS manual for further details.
3 Connecting and Using a Source Device
60
3
Connecting and Using a Source Device
3.2.3 Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
Select a language and change the resolution to the optimum value.
The optimal resolution for this monitor is as follows:
[+]
Follow the above settings to set the resolution.
English
EXIT
1
2
Press [
֩Ѝ‫ی‬Ԃक
࣏ࢽ
] to move to the language you want and press [
To hide the information message, press [
AUTO
۴੔
].
].

If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.

The optimum resolution can also be selected in Control Panel on your PC.
3 Connecting and Using a Source Device
61
3
Connecting and Using a Source Device
3.2.4 Changing the Resolution Using a PC

Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture
quality.

The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel
Display
Settings and change the resolution.
3 Connecting and Using a Source Device
62
3
Connecting and Using a Source Device
Changing the Resolution on Windows Vista
Go to Control Panel
Personalization
Display Settings and change the resolution.
3 Connecting and Using a Source Device
63
3
Connecting and Using a Source Device
Changing the Resolution on Windows 7
Go to Control Panel
Display
Screen Resolution and change the resolution.
3 Connecting and Using a Source Device
64
3
3.3
Connecting and Using a Source Device
Connecting the Power
Connect the power cable to the DC power
adapter. Next, connect the DC power
adapter to [DC 14V IN] on the stand base.
DC 14V IN
Connect the power extension cable to [DC
14V] on the monitor and [DC 14V OUT] on
the stand base.
DC 14V
DC 14V OUT
Plug in the power cable to the power socket.
The DC power adapter cannot be attached to the back of the monitor.
3 Connecting and Using a Source Device
65
4
4.1
Screen Setup
Configure the screen settings such as brightness and color tone.
Brightness
You can adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
SAMSUNG
This menu is not available when MAGIC
Bright is set to Dynamic Contrast mode.
4.1.1 Configuring Brightness
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Brightness and press [
] on the product.
] on the product. The following screen will
appear.
PICTURE
Brightness
:
100
Contrast
:
75
Sharpness
:
60
SAMSUNG
MAGIC Bright
: Custom
SAMSUNG
MAGIC Angle
Coarse
: Off
:
1936
Fine
:
0
ࢇࢷ֩Ѝ
4
Adjust the Brightness using the [
࣏ࢽ
AUTO
۴੔
] buttons.
4 Screen Setup
66
4
4.2
Screen Setup
Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.

SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.

SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
4.2.1 Configuring Contrast
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Contrast and press [
] on the product.
] on the product. The following screen will
appear.
PICTURE
Brightness
100
Contrast
75
Sharpness
60
SAMSUNG
MAGIC Bright
Custom
SAMSUNG
MAGIC Angle
Coarse
: Off
Fine
ࢇࢷ֩Ѝ
4
Adjust the Contrast using the [
࣏ࢽ
1936
0
AUTO
۴੔
] buttons.
4 Screen Setup
67
4
4.3
Screen Setup
Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.

SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.

SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
4.3.1 Configuring Sharpness
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Sharpness and press [
] on the product.
] on the product. The following screen will
appear.
PICTURE
Brightness
100
Contrast
75
Sharpness
60
SAMSUNG
MAGIC Bright
Custom
SAMSUNG
MAGIC Angle
Coarse
Off
Fine
ࢇࢷ֩Ѝ
4
Adjust the Sharpness using the [
࣏ࢽ
1936
0
AUTO
۴੔
] buttons.
4 Screen Setup
68
4
4.4
Screen Setup
SAMSUNG MAGIC Bright
This menu provides an optimum picture quality suitable for the environment where the product will be
used.
SAMSUNG
This menu is not available when MAGIC
Angle is enabled.
This feature provides the viewing angle, brightness, and tint to suit your preferences.
4.4.1 Configuring SAMSUNG MAGIC Bright
1
2
3
Press [
Press [
Press [
] on the product.
] to move to PICTURE and press [
] on the product.
SAMSUNG
] to move to MAGICBright and press [
] on the product. The following screen will
appear.
PICTURE
Brightness
100
Contrast
75
Sharpness
60
SAMSUNG
MAGIC Bright
Custom
‫ࢽ࣏࢕ࡈی‬
SAMSUNG
MAGIC Angle
Coarse
ଥࢿ
Game
Fine
ࢇࢷ֩Ѝ
Standard
Cinema
Dynamic Contrast
࣏ࢽ
0
AUTO
۴੔

Custom: Customize the contrast and brightness as required.

Standard: Obtain a picture quality suitable for editing documents or using Internet.

Game: Obtain a picture quality suitable for playing games that involve many graphic effects and
dynamic movements.

Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD
content.

4
5
Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
4 Screen Setup
69
4
4.5
Screen Setup
SAMSUNG MAGIC Angle
SAMSUNG
MAGICAngle
allows you to configure the settings to obtain the optimum picture quality according to your
viewing angle.

SAMSUNG
This menu is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.

SAMSUNG
This menu is not available when MAGIC
Color is enabled.
This feature provides the viewing angle, brightness, and tint to suit your preferences.
4.5.1 Configuring SAMSUNG MAGIC Angle
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
SAMSUNG
] to move to MAGIC
Angle and press [
] on the product.
] on the product. The following screen will
appear.
PICTURE
Brightness
100
Contrast
75
Sharpness
60
SAMSUNG
MAGIC Bright
‫ࢽ࣏࢕ࡈی‬
Off
SAMSUNG
MAGIC Angle
Coarse
Lean Back Mode 2
Standing Mode
ଥࢿ
Fine
Group View
Lean Back Mode 1
Side Mode
Custom
ࢇࢷ֩Ѝ
AUTO
࣏ࢽ
۴੔
4
1
1
5
5
2
3
4
5
① : Select this option to view directly in front of the product.

Off

Lean Back Mode 1
② : Select this option to view from a place slightly lower than the product.

Lean Back Mode 2
③ : Select this option to view from a place lower than Lean Back Mode 1.

Standing Mode

Side Mode

Group View: Select this option for more than one viewer to view from places

Custom: Lean Back Mode 1 will be applied by default if Custom is selected.
Press [
④ : Select this option to view from a place higher than the product.
⑤ : Select this option to view from either side of the product.
] to move to the option you want and press [
① , ④ , and ⑤ .
].
The selected option will be applied.
4 Screen Setup
70
4
4.6
Screen Setup
Coarse
Adjust the screen frequency.
This menu is available in Analog mode only.
4.6.1 Adjusting Coarse
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Coarse and press [
] on the product.
] on the product. The following screen will appear.
PICTURE
Brightness
:
100
Contrast
:
75
Sharpness
:
60
SAMSUNG
MAGIC Bright
: Custom
MAGIC Angle
Coarse
SAMSUNG
: Off
Fine
:
ࢇࢷ֩Ѝ
4
Adjust the Coarse using the [
:
࣏ࢽ
1936
0
AUTO
۴੔
] buttons.
4 Screen Setup
71
4
4.7
Screen Setup
Fine
Fine-adjust the screen to obtain a vivid picture.
This menu is available in Analog mode only.
4.7.1 Adjusting Fine
1
2
3
Press [
] on the product.
Press [
] to move to PICTURE and press [
Press [
] to move to Fine and press [
] on the product.
] on the product. The following screen will appear.
PICTURE
Brightness
:
100
Contrast
:
75
Sharpness
:
60
SAMSUNG
MAGIC Bright
: Custom
SAMSUNG
MAGIC Angle
Coarse
: Off
:
1936
Fine
:
0
ࢇࢷ֩Ѝ
4
Adjust the Fine using the [
࣏ࢽ
AUTO
۴੔
] buttons.
4 Screen Setup
72
5
Configuring Tint
SAMSUNG
Adjust the tint of the screen. This menu is not available when MAGIC
Bright is set to Cinema or
Dynamic Contrast mode.
5.1
SAMSUNG MAGIC Color
SAMSUNG
MAGICColor
is a new picture-quality improvement technology developed independently by Samsung,
which delivers vivid natural colors without picture quality degradation.
SAMSUNG
This menu is not available when MAGIC
Angle is enabled.
5.1.1 Configuring SAMSUNG MAGIC Color
1
2
3
Press [
Press [
Press [
] on the product.
] to move to COLOR and press [
] on the product.
SAMSUNG
] to move to MAGICColor and press [
] on the product. The following screen will
appear.
COLOR
4
5
SAMSUNG
MAGIC Color
:
Red
:
Green
:
Blue
:
Color Tone
: Normal
Gamma
: Mode1
ࢇࢷ֩Ѝ
࣏ࢽ
Off
Demo
Full
Intelligent
50
AUTO
۴੔
SAMSUNG

Off: Disable MAGICColor.

SAMSUNG
Demo: Compare normal screen mode with MAGIC
Color mode.

Full: Obtain a vivid picture quality for all areas including the flesh colors in the picture.

Intelligent: Improve the chroma for all areas except the flesh colors in the picture.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
5 Configuring Tint
73
5
5.2
Configuring Tint
Red
Adjust the value of the color red in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
5.2.1 Configuring Red
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
Press [
] to move to Red and press [
] on the product.
] on the product. The following screen will appear.
&2/25
4
Adjust the Red using the [
SAMSUNG
MAGIC Color
: Off
Red
:
Green
:
50
Blue
:
50
Color Tone
: Normal
Gamma
: Mode1
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
࣏ࢽ
࣏ࢽ
50
AUTO
۴੔
] buttons.
5 Configuring Tint
74
5
5.3
Configuring Tint
Green
Adjust the value of the color green in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
5.3.1 Configuring Green
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
Press [
] to move to Green and press [
] on the product.
] on the product. The following screen will appear.
COLOR
4
Adjust the Green using the [
SAMSUNG
MAGIC Color
: Off
Red
:
50
Green
:
50
Blue
:
50
Color Tone
: Normal
Gamma
: Mode1
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
࣏ࢽ
࣏ࢽ
AUTO
۴੔
] buttons.
5 Configuring Tint
75
5
5.4
Configuring Tint
Blue
Adjust the value of the color blue in the picture. (Range: 0~100)
A higher value will increase the intensity of the color.
SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.
5.4.1 Configuring Blue
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
Press [
] to move to Blue and press [
] on the product.
] on the product. The following screen will appear.
COLOR
4
Adjust the Blue using the [
SAMSUNG
MAGIC Color
: Off
Red
:
50
Green
:
50
Blue
:
50
Color Tone
: Normal
Gamma
: Mode1
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
࣏ࢽ
࣏ࢽ
AUTO
۴੔
] buttons.
5 Configuring Tint
76
5
5.5
Configuring Tint
Color Tone
Adjust the general color tone of the picture.

SAMSUNG
This menu is not available when MAGIC
Color is in Full or Intelligent mode.

SAMSUNG
This menu is not available when MAGIC
Angle is enabled.
5.5.1 Configuring the Color Tone Settings
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
Press [
] to move to Color Tone and press [
] on the product.
] on the product. The following screen will
appear.
COLOR
SAMSUNG
MAGIC Color
: Off
Red
:
50
Green
:
50
Blue
:
Color Tone
Gamma
ࢇࢷ֩Ѝ
4
5
Cool 2
Cool 1
: ૲ࣱ
Normal
: ֻҖ
Warm 1
Warm 2
Custom
࣏ࢽ
AUTO
۴੔

Cool 2: Set the color temperature to be cooler than Cool 1.

Cool 1: Set the color temperature to be cooler than Normal mode.

Normal: Display the standard color tone.

Warm 1: Set the color temperature to be warmer than Normal mode.

Warm 2: Set the color temperature to be warmer than Warm 1.

Custom: Customize the color tone.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
5 Configuring Tint
77
5
5.6
Configuring Tint
Gamma
Adjust the mid-range brightness (Gamma) of the picture.
SAMSUNG
This menu is not available when MAGIC
Angle is enabled.
5.6.1 Configuring Gamma
1
2
3
Press [
] on the product.
Press [
] to move to COLOR and press [
] on the product.
Press [
] to move to Gamma and press [
] on the product. The following screen will appear.
COLOR
4
5
Press [
SAMSUNG
MAGIC Color
: Off
Red
:
50
Green
:
50
Blue
:
50
Color Tone
: Normal
Gamma
: Mode1
ֻҖ
Mode2
Mode3
ࢇࢷ֩Ѝ
࣏ࢽ
] to move to the option you want and press [
AUTO
۴੔
].
The selected option will be applied.
5 Configuring Tint
78
6
6.1
Resizing or Relocating the Screen
H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
This menu is available in Analog mode only.
6.1.1 Configuring H-Position & V-Position
1
2
3
Press [
] on the product.
Press [
] to move to SIZE&POSITION and press [
] on the product.
Press [
] to move to H-Position or V-Position, and press [
]. The following screen will
appear.
SIZE&POSITION
H-Position
:
50
H-Position
:
50
V-Position
:
50
V-Position
:
50
Image Size
: Wide
Image Size
: Wide
Menu H-Position
:
50
Menu H-Position
:
50
Menu V-Position
:
1
Menu V-Position
:
1
ࢇࢷ֩Ѝ
4
SIZE&POSITION
Press [
࣏ࢽ
AUTO
۴੔
ࢇࢷ֩Ѝ
࣏ࢽ
AUTO
۴੔
] to configure H-Position or V-Position.
6 Resizing or Relocating the Screen
79
6
6.2
Resizing or Relocating the Screen
Image Size
Change the picture size.
6.2.1 Changing the Image Size
1
2
3
Press [
] on the product.
Press [
] to move to SIZE&POSITION and press [
Press [
] to move to Image Size and press [
] on the product.
] on the product. The following screen will
appear.
SIZE&POSITION
H-Position
50
V-Position
50
Image Size
Menu H-Position
࢕Ѱ
Auto
Wide
Menu V-Position
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
1
AUTO
࣏ࢽ
࣏ࢽ
۴੔

Auto: Display the picture according to the aspect ratio of the input source.

Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
SIZE&POSITION
H-Position
50
V-Position
50
Image Size
4:3
࢕Ѱ
:LGH
6FUHHQ)LW
Menu H-Position
Menu V-Position
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
1
AUTO
࣏ࢽ
࣏ࢽ
۴੔

4:3: Display the picture with an aspect ratio of 4:3.

Wide: Display the picture in full screen regardless of the aspect ratio of the input source.

Screen Fit: Display the picture with the original aspect ratio without cutting off.
Changing the screen size is available when the following conditions are satisfied.
4
5

A digital output device is connected using the DVI/DP cable.

The input signal is 480p, 576p, 720p, 1080i, or 1080p.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
6 Resizing or Relocating the Screen
80
6
6.3
Resizing or Relocating the Screen
Menu H-Position & Menu V-Position
Menu H-Position: Move the menu position to the left or right.
Menu V-Position: Move the menu position up or down.
6.3.1 Configuring Menu H-Position & Menu V-Position
1
2
3
Press [
] on the product.
Press [
] to move to SIZE&POSITION and press [
] on the product.
Press [
] to move to Menu H-Position or Menu V-Position, and press [
]. The following
screen will appear.
SIZE&POSITION
H-Position
:
50
H-Position
:
50
V-Position
:
50
V-Position
:
50
Image Size
: Wide
Image Size
: Wide
Menu H-Position
:
50
Menu H-Position
:
50
Menu V-Position
:
1
Menu V-Position
:
1
ࢇࢷ֩Ѝ
4
SIZE&POSITION
Press [
࣏ࢽ
AUTO
۴੔
ࢇࢷ֩Ѝ
࣏ࢽ
AUTO
۴੔
] to configure Menu H-Position or Menu V-Position.
6 Resizing or Relocating the Screen
81
7
7.1
Setup and Reset
Reset
Return all the settings for the product to the default factory settings.
7.1.1 Initializing Settings (Reset)
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Reset and press [
] on the product.
] on the product. The following screen will appear.
SETUP&RESET
Reset
Language
English
Off Timer On/Off
Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
Acceleration
Customized Key
SAMSUNG
MAGIC Angle
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ
AUTO
࣏ࢽ
࣏ࢽ
ࢇѰ
۴੔
۴੔
Reset all settings?
Yes
No
EXIT
4
5
Press [
] to move to the option you want and press [
AUTO
].
The selected option will be applied.
7 Setup and Reset
82
7
7.2
Setup and Reset
Language
Set the menu language.

A change to the language setting will only be applied to the onscreen menu display.

It will not be applied to other functions on your PC.
7.2.1 Changing the Language
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Language and press [
] on the product.
] on the product. The following screen will
appear.
SETUP&RESET
Reset
Language
Off Timer On/Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
Customized Key
ࢇࢷ֩Ѝ
4
5
Press [
'HXWVFK
(QJOLVK
(VSDxRO
)UDQoDLV
ଥࢿ
,WDOLDQR
0DJ\DU
3ROVNL
ଥࢿ
3RUWXJXrV
ƧNJLjLjǁƿǀ
6YHQVND
3&
7UNoH
ᣣᧄ⺆
ɼ‫ܖ‬؆‫ـ‬
ଞ˲߭
∝䇁
ࢇѰ
] to move to the language you want and press [
AUTO
۴੔
].
The selected option will be applied.
7 Setup and Reset
83
7
7.3
Setup and Reset
Off Timer On/Off
Enable or disable the off timer that automatically powers off the product.
7.3.1 Configuring Off Timer On/Off
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Off Timer On/Off and press [
] on the product.
] on the product. The following screen
will appear.
SETUP&RESET
Reset
Language
: English
Off Timer On/Off
: Off
On
Off Timer Setting
PC/AV Mode
Key Repeat Time
: Acceleration
Customized Key
: SAMSUNG
MAGIC Angle
ࢇࢷ֩Ѝ
4
5
ࢇѰ
AUTO
۴੔

Off: Deactivate the off timer so that the product does not power off automatically.

On: Activate the off timer so that the product powers off automatically.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
7 Setup and Reset
84
7
7.4
Setup and Reset
Off Timer Setting
The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the
specified number of hours.
This menu is available only when Off Timer On/Off is set to On.
7.4.1 Configuring Off Timer Setting
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Off Timer Setting and press [
] on the product.
] on the product. The following screen
will appear.
SETUP&RESET
Reset
Language
: English
Off Timer On/Off
: On
Off Timer Setting
:
10h
PC/AV Mode
Key Repeat Time
: Acceleration
Customized Key
: SAMSUNG
MAGIC Angle
ࢇࢷ֩Ѝ
4
Press [
ࢇѰ
AUTO
۴੔
] to configure Off Timer Setting.
7 Setup and Reset
85
7
7.5
Setup and Reset
PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.
PC/AV Mode is only available in Digital mode.
7.5.1 Configuring PC/AV Mode
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to PC/AV Mode and press [
] on the product.
] on the product. The following screen will
appear.
SETUP&RESET
Reset
Language
: English
Off Timer On/Off
: On
Off Timer Setting
:
PC/AV Mode
Key Repeat Time
: PC
: AV
Customized Key
: SAMSUNG
MAGIC Angle
ࢇࢷ֩Ѝ
4
5
Press [
ࢇѰ
] to move to the option you want and press [
10h
AUTO
۴੔
].
The selected option will be applied.
7 Setup and Reset
86
7
7.6
Setup and Reset
Key Repeat Time
Control the response rate of a button when the button is pressed.
7.6.1 Configuring Key Repeat Time
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Key Repeat Time and press [
] on the product.
] on the product. The following screen
will appear.
SETUP&RESET
Reset
Language
: English
Off Timer On/Off
: On
Off Timer Setting
Key Repeat Time
: Acceleration
1 sec
2 sec
: No Repeat
Customized Key
:
PC/AV Mode
ࢇࢷ֩Ѝ

‫ݤ‬ɾ
SAMSUNG
MAGIC Angle
ࢇѰ
AUTO
۴੔
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4
5
Press [
] to move to the option you want and press [
].
The selected option will be applied.
7 Setup and Reset
87
7
7.7
Setup and Reset
Customized Key
You can customize Customized Key as follows.
7.7.1 Configuring Customized Key
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Customized Key and press [
] on the product.
] on the product. The following screen
will appear.
SETUP&RESET
Reset
Language
English
Off Timer On/Off
Off
Off Timer Setting
PC/AV Mode
Key Repeat Time
Customized Key
ࢇࢷ֩Ѝ
ࢇࢷ֩Ѝ

4
5
SAMSUNG
MAGICAngle
Press [
PC
$FFHOHUDWLRQ
MAGIC Angle
SAMSUNG
Acceleration
2Q
MAGIC Bright
: SAMSUNG
Image
Bright
MAGICSize
SAMSUNG
࣏ࢽ
࣏ࢽ
ࢇѰ
AUTO
۴੔
۴੔
SAMSUNG
- MAGICBright - Image Size
] to move to the option you want and press [
].
The selected option will be applied.
7 Setup and Reset
88
7
7.8
Setup and Reset
Auto Source
You can activate Auto Source.
7.8.1 Configuring Auto Source
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Auto Source and press [
] on the product.
] on the product. The following screen will
appear.
SETUP&RESET
Display Time
: Auto
: Manual
Menu Transparency
: On
Auto Source
Return
4
5
Adjust

Auto: The input source is automatically recognized.

Manual: Manually select an input source.
Press [
] to move to the option you want and press [
AUTO
Enter
].
The selected option will be applied.
7 Setup and Reset
89
7
7.9
Setup and Reset
Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
7.9.1 Configuring Display Time
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Display Time and press [
] on the product.
] on the product. The following screen will
appear.
SETUP&RESET
Auto Source
: Auto
Display Time
: 5 sec
10 sec
:
20 sec
200 sec
Menu Transparency
Return
4
5
Press [
Adjust
] to move to the option you want and press [
AUTO
Enter
].
The selected option will be applied.
7 Setup and Reset
90
7
Setup and Reset
7.10 Menu Transparency
Set the transparency for the menu windows:
7.10.1 Changing Menu Transparency
1
2
3
Press [
] on the product.
Press [
] to move to SETUP&RESET and press [
Press [
] to move to Menu Transparency and press [
] on the product.
] on the product. The following
screen will appear.
SETUP&RESET
Auto Source
: Auto
Display Time
: 20 VHF
Menu Transparency
: Ѱ࢖
Off
On
Return
4
5
Press [
Adjust
] to move to the option you want and press [
AUTO
Enter
].
The selected option will be applied.
7 Setup and Reset
91
8
8.1
INFORMATION Menu and Others
INFORMATION
View the current input source, frequency and resolution.
8.1.1 Displaying INFORMATION
1
2
Press [
Press [
] on the product.
] to move to INFORMATION. The current input source, frequency and resolution will
appear.
PICTURE
COLOR
Digital
67.5kHz 60Hz PP
1920 x 1080
SIZE&POSITION
Optimal Mode
1920 x 1080 60Hz
SETUP&RESET
INFORMATION
EXIT
֩Ѝ‫ی‬Ԃक
࣏ࢽ
AUTO
۴੔
The displayed image may differ depending on the model.
8.2
Configuring Brightness in the Initial Screen
Adjust the Brightness using the [
displayed.
1
Press [
] buttons when the initial screen (that displays no menu screen) is
] when the initial screen is displayed. The following screen will appear.
Brightness
100
EXIT
2
Adjust the Brightness using the [
] buttons.
8 INFORMATION Menu and Others
92
9
9.1
Installing the Software
Natural Color
9.1.1 What is Natural Color?
One of the problems with using a PC is that the colors you see on the screen are different from the colors
of printed pictures or source images input through a scanner or digital camera. Natural Color is a color
management system developed by Samsung Electronics to resolve this problem. This software works
with Samsung products only and enables you to adjust the displayed colors on the screen to match the
colors of the printed pictures. For more information, refer to the online help of the software (F1).
The Natural Color is provided online. You can download it from the website below and install;
http://www.samsung.com/us/consumer/learningresources/monitor/naturalcolorexpert/pop_download.html
9 Installing the Software
93
9
9.2
Installing the Software
MultiScreen
MultiScreen
MultiScreen enables users to use the monitor by partitioning multiple sections.
9.2.1 Installing the Software
1
2
Insert the installation CD into the CD-ROM drive.
Select the "MultiScreen" setup program.
If the pop-up screen for the software installation does not appear on the main screen, find and
double-click the "MultiScreen" setup file on the [CD-ROM].
3
4
When the Installation Wizard appears, click [Next].
Follow the instructions given on the screen to proceed with installation.

The software may not work properly if you do not restart the computer after the installation.

The "MultiScreen" icon may not appear depending on the computer system and the product
specifications.

If the shortcut icon does not appear, press the "F5" key.
Restrictions and Problems with the Installation (MultiScreen)
The "MultiScreen" installation may be affected by the Graphics card, [Motherboard] and the Networking
environment.
Operating System
"OS"

"Windows 2000"

"Windows XP Home Edition"

"Windows XP Professional"

"Windows Vista 32bit"

"Windows 7 32bit"
For "MultiScreen", the operating systems "Windows 2000" or later is recommended.
"Hardware"

At least 32MB of memory

At least 60MB of free space on the hard disk drive
9 Installing the Software
94
9
Installing the Software
9.2.2 Removing the Software
Click [Start], select [Settings]/[Control Panel], and then double-click [Add or Remove Programs].
Select "MultiScreen" from the program list and click the [Add/Delete] button.
9 Installing the Software
95
10
Troubleshooting Guide
10.1 Requirements Before Contacting Samsung Customer
Service Center
10.1.1 Testing the Product
Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,
contact Samsung Customer Service Center.
Check if your product is operating normally by using the product test function.
If the screen is turned off and the power indicator blinks even though the product is properly connected
to a PC, perform a self-diagnosis test.
1
2
3
4
Power off both the PC and product.
Disconnect the cables from the product.
Power on the product.
If the message "Check Signal Cable" appears, the product is working normally.
If the screen remains blank, check the PC system, video controller and cable.
10.1.2 Checking the Resolution and Frequency
For a mode that exceeds the supported resolution (refer to "11.3 Standard Signal Mode Table"), the
message "Not Optimum Mode" will appear for a short time.
10.1.3 Check the following.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product
and PC, and ensure the connectors are locked.
(Refer to "3.2 Connecting and Using a PC")
Screen issue
The power LED is off. The screen will not switch
on.
Check that the power cable is connected
properly. (Refer to "3.2 Connecting and Using a
PC")
The message "Check Signal Cable" appears.
Check that the cable is properly connected to the
product. (Refer to "3.2 Connecting and Using a
PC")
Check that the device connected to the product is
powered on.
10 Troubleshooting Guide
96
10
Troubleshooting Guide
Screen issue
"Not Optimum Mode" is displayed.
This message appears if the signal from the
graphics card exceeds the maximum resolution or
frequency for the product.
Change the maximum resolution and frequency to
suit the product performance, referring to
Standard Signal Mode Table (104page).
The images on the screen look distorted.
Check the cable connection to the product (Refer
to "3.2 Connecting and Using a PC")
The screen is not clear. The screen is blurry.
Adjust Coarse(71page) and Fine(72page).
Remove any accessories (video extension cable,
etc.) and try again.
Set the resolution and frequency to the
recommended level. (Refer to "11.1 General")
The screen appears unstable and shaky.
There are shadows or ghost images left on the
screen.
Check that the resolution and frequency for the
PC are within the range of resolution and
frequency compatible with the product. Next, if
required, change the settings, referring to
Standard Signal Mode Table (104page) in this
manual and the INFORMATION menu on the
product.
The screen is too bright. The screen is too dark.
Adjust Brightness(66page) and
Contrast(67page).
Screen color is inconsistent.
Change the COLOR settings.
(Refer to " Configuring Tint")
The colors on the screen have a shadow and are
distorted.
Change the COLOR settings.
White does not really look white.
Change the COLOR settings.
(Refer to " Configuring Tint")
(Refer to " Configuring Tint")
There is no image on the screen and the power
LED blinks every 0.5 to 1 second.
The product is operating in power-saving mode.
Press any key on the keyboard or move the
mouse to return to normal operating mode.
Sound issue
There is no sound.
Check the connection of the audio cable or adjust
the volume.
Check the volume.
10 Troubleshooting Guide
97
10
Troubleshooting Guide
Sound issue
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the
maximum level, adjust the volume on your PC
sound card or software program.
Source device issue
A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is
booting, have your PC serviced.
10 Troubleshooting Guide
98
10
Troubleshooting Guide
10.2 Q & A
Question
How can I change the
frequency?
Answer
Set the frequency on your graphics card.

Windows XP: Go to Control Panel
Themes
Display
Settings
Appearance and
Advanced
Monitor,
and adjust Refresh rate under Monitor settings.

Windows ME/2000: Go to Control Panel
Settings
Advanced
Display
Monitor, and adjust Refresh rate
under Monitor settings.

Windows Vista: Go to Control Panel
Appearance and
Personalization
Display Settings
Advanced Settings
Personalization
Monitor, and adjust Refresh rate
under Monitor settings.

Windows 7: Go to Control Panel
Personalization
Advanced settings
Display
Appearance and
Screen Resolution
Monitor, and adjust Refresh rate under
Monitor settings.
10 Troubleshooting Guide
99
10
Troubleshooting Guide
Question
How can I change the
resolution?
Answer

Windows XP: Go to Control Panel
Themes

Display
Appearance and
Settings, and adjust the resolution.
Windows ME/2000: Go to Control Panel
Display
Settings, and adjust the resolution.

Windows Vista: Go to Control Panel
Personalization
Personalize
Appearance and
Display Settings, and
adjust the resolution.

Windows 7: Go to Control Panel
Personalization
Display
Appearance and
Adjust Resolution, and adjust
the resolution.
How do I set power-saving
mode?

Windows XP: Set power-saving mode in Control Panel
Appearance and Themes
Display
Screen Saver
Settings or BIOS SETUP on the PC.

Windows ME/2000: Set power-saving mode in Control Panel
Display
Screen Saver Settings or BIOS SETUP on the
PC.

Windows Vista: Set power-saving mode in Control Panel
Appearance and Personalization
Personalize
Screen
Saver Settings or BIOS SETUP on the PC.

Windows 7: Set power-saving mode in Control Panel
Appearance and Personalization
Personalize
Screen
Saver Settings or BIOS SETUP on the PC.
Refer to the user manual for your PC or graphics card for further instructions on adjustment.
10 Troubleshooting Guide
100
11
Specifications
11.1 General
Model Name
Panel
Synchronization
TS190C
TS220C
TS240C
Size
19 inches (48 cm)
21.5 inches (55 cm)
24 inches (61 cm)
Display area
408.2 mm (H) x
255.2 mm (V) / 16.1
inches (H) x 10.0
inches (V)
476.6 mm (H) x
268.1 mm (V) / 18.9
inches (H) x 10.1
inches (V)
518.4 mm (H) x
324.0 mm (V) / 20.4
inches (H) x 12.8
inches (V)
Horizontal
Frequency
30~81kHz
Vertical
Frequency
56~75Hz
Display Color
16.7M
Optimum
Resolution
1440 x 900 @ 60Hz
1920 x 1080 @
60Hz
1920 x 1200 @
60Hz
Maximum
Resolution
1440 x 900 @ 60Hz
1920 x 1080 @
60Hz
1920 x 1200 @
60Hz
Maximum Pixel Clock
137MHz (Analog,
Digital)
164MHz (Analog,
Digital)
164MHz (Analog,
Digital)
Power Supply
This product uses 100 to 240V. Refer to the label at the back of the
product as the standard voltage can vary in different countries.
Signal connectors
RGB IN (D-Sub) port, DVI port
Server connector
LAN
USB
USB 2.0 x 6 (Down stream)
Resolution
Dimensions (W x
H x D) / Weight
Environmental
considerations
With Stand
443.0 × 416.8
×227.0 mm / 17.4 x
16.4 x 8.9 inches /
4.4 Kg / 9.7 Ibs
513.0 × 424.1 ×
227.0 mm / 20.2 x
16.7 x 8.9 inches /
4.9 Kg / 10.8 Ibs
560.0 × 444.3 ×
227.0 mm / 22.0 x
17.5 x 8.9 inches /
5.3 Kg / 11.7 Ibs
Without Stand
443.0 × 301.9 × 49.5
mm / 17.4 x 11.9 x
1.9 inches / 3.2 Kg /
7.1 Ibs
513.0 × 317.0 × 50.0
mm / 20.2 x 12.5 x
2.0 inches / 3.6 Kg /
7.9 Ibs
560.0 × 374.0 × 50.0
mm / 22.0 x 14.7 x
2.0 inches / 4.0 Kg /
8.8 Ibs
Operating
Temperature : 50°F ~ 104°F (10°C ~ 40°C),
Humidity : 10 % ~ 80 %, non-condensing
Storage
Temperature : -4°F ~ 113°F (-20°C ~ 45°C),
Humidity : 5 % ~ 95 %, non-condensing
11 Specifications
101
11
Specifications
Model Name
TS190C
TS220C
TS240C
Plug-and-Play
This monitor can be installed and used with any Plug-and-Play
compatible systems. Two-way data exchange between the monitor
and PC system optimizes the monitor settings. Monitor installation
takes place automatically. However, you can customize the
installation settings if desired.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately
1 pixel per million (1ppm) may appear brighter or darker on the panel.
This does not affect product performance.
VESA (V x H)
100 x 100 mm / 3.9 x 3.9 inches
The above specifications are subject to change without notice to improve quality.
This device is a Class B digital apparatus.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
CALIFORNIA USA ONLY (Applicable for networking models only.)
This Perchlorate warning applies only to primary CR(Manganese Dioxide) Lithium coin cells in the
product sold or distributed ONLY in California USA
"Perchloate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/
perchlorate."
11 Specifications
102
11
Specifications
11.2 PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and
changing the color of the power LED if the product is not used for a specified period of time. The power
is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or
move the mouse. Power-saving mode functions only when the product is connected to a PC that has a
power-saving function.
PowerSaver
Normal Operation
Power saving
mode
Power off
(Power button
off)
Power off
(Power switch
off)
Power Indicator
On
Off
Off
Off
Less than 1.8 W
Less than 1.8 W
0W
TS190C : Less than 45 W
Power
Consumption
TS220C : Less than 50 W
TS240C : Less than 55 W

The power consumption level can vary in different operating conditions or when settings are
changed.

To reduce the power consumption to 0 watts, turn off the switch on the adapter or disconnect the
power cable. Be sure to disconnect the power cable when you will not be using the product for an
extended period of time. To reduce the power consumption to 0 watts when the power switch is
not available, disconnect the power cable.
11 Specifications
103
11
Specifications
11.3 Standard Signal Mode Table

This product can be set to only one resolution for each screen size to obtain the optimum picture
quality due to the nature of the panel. Therefore, a resolution other than the specified resolution
may degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for the screen size of your product.

Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
If the LCD monitor does not support 85Hz, change the vertical frequency to 60Hz using the CDT
monitor before you exchange it with the LCD monitor.
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will
automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal
modes, the screen may be blank even though the power LED turns on. In such a case, change the
settings according to the following table by referring to the graphics card user manual.
TS190C
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 960
60.000
60.000
108.000
+/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 640 x 480
31.469
59.940
25.175
-/-
11 Specifications
104
11
Specifications
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 800
62.795
74.934
106.500
-/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1440 x 900
70.635
74.984
136.750
-/+
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
IBM, 640 x 480
31.469
59.940
25.175
-/-
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 960
60.000
60.000
108.000
+/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 800
62.795
74.934
106.500
-/+
TS220C
11 Specifications
105
11
Specifications
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1440 x 900
70.635
74.984
136.750
-/+
VESA, 1600 x 1200
75.000
60.000
162.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
IBM, 640 x 480
31.469
59.940
25.175
-/-
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
35.156
56.250
36.000
+/+
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 960
60.000
60.000
108.000
+/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1440 x 900
70.635
74.984
136.750
-/+
TS240C
11 Specifications
106
11
Specifications
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1600 x 1200
75.000
60.000
162.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
VESA,1920 x 1200 (RB)
74.038
59.950
154.000
+/-

Horizontal Frequency
The time required to scan a single line from the left to the right side of the screen is called a
horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency.
Horizontal frequency is measured in kHz.

Vertical Frequency
Repeating the same picture dozens of times per second allows you to view natural pictures. The
repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
11 Specifications
107
Appendix
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
NORTH AMERICA
U.S.A
1-800-SAMSUNG (726-7864)
http://www.samsung.com
CANADA
1-800-SAMSUNG (726-7864)
http://www.samsung.com/ca
http://www.samsung.com/ch_fr
(French)
MEXICO
01-800-SAMSUNG (726-7864)
http://www.samsung.com
LATIN AMERICA
ARGENTINA
0800-333-3733
http://www.samsung.com
BRAZIL
0800-124-421
4004-0000
http://www.samsung.com
BOLIVIA
800-10-7260
http://www.samsung.com
CHILE
800-SAMSUNG (726-7864)
http://www.samsung.com
From mobile 02-482 82 00
COLOMBIA
01-8000112112
http://www.samsung.com
COSTA RICA
0-800-507-7267
http://www.samsung.com
DOMINICA
1-800-751-2676
http://www.samsung.com
ECUADOR
1-800-10-7267
http://www.samsung.com
EL SALVADOR
800-6225
http://www.samsung.com
GUATEMALA
1-800-299-0013
http://www.samsung.com
HONDURAS
800-27919267
http://www.samsung.com
JAMAICA
1-800-234-7267
http://www.samsung.com
NICARAGUA
00-1800-5077267
http://www.samsung.com
PANAMA
800-7267
http://www.samsung.com
PERU
0-800-777-08
http://www.samsung.com
PUERTO RICO
1-800-682-3180
http://www.samsung.com
TRINIDAD & TOBAGO
1-800-SAMSUNG (726-7864)
http://www.samsung.com
VENEZUELA
0-800-100-5303
http://www.samsung.com
Appendix
108
Appendix
EUROPE
ALBANIA
42 27 5755
http://www.samsung.com
AUSTRIA
0810 - SAMSUNG
(7267864, € 0.07/min)
http://www.samsung.com
BELGIUM
02-201-24-18
http://www.samsung.com/be
(Dutch)
http://www.samsung.com/be_fr
(French)
BOSNIA
05 133 1999
http://www.samsung.com
BULGARIA
07001 33 11
http://www.samsung.com
CROATIA
062 SAMSUNG (062 726 7864)
http://www.samsung.com
CZECH
800 - SAMSUNG (800-726786)
http://www.samsung.com
Samsung Electronics Czech and Slovak, s.r.o.,
Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8
DENMARK
70 70 19 70
http://www.samsung.com
FINLAND
030 - 6227 515
http://www.samsung.com
FRANCE
01 48 63 00 00
http://www.samsung.com
GERMANY
01805 - SAMSUNG
(726-7864,€ 0,14/Min)
http://www.samsung.com
CYPRUS
From landline : 8009 4000
http://www.samsung.com
GREECE
From landline : 80111-SAMSUNG
(7267864)
http://www.samsung.com
From landline & mobile : (+30)
210 6897691
HUNGARY
06-80-SAMSUNG (726-7864)
http://www.samsung.com
ITALIA
800-SAMSUNG (726-7864)
http://www.samsung.com
KOSOVO
+381 0113216899
http://www.samsung.com
LUXEMBURG
261 03 710
http://www.samsung.com
MACEDONIA
023 207 777
http://www.samsung.com
MONTENEGRO
020 405 888
http://www.samsung.com
NETHERLANDS
0900 - SAMSUNG
(0900-7267864) (€ 0,10/Min)
http://www.samsung.com
NORWAY
815-56 480
http://www.samsung.com
POLAND
0 801-1SAMSUNG (172-678)
+48 22 607-93-33
http://www.samsung.com
Appendix
109
Appendix
EUROPE
PORTUGAL
808 20 - SAMSUNG (808 20
http://www.samsung.com
7267)
RUMANIA
From landline : 08010-SAMSUNG
http://www.samsung.com
(7267864)
From landline & mobile : (+40)
21 206 01 10
SERBIA
0700 Samsung (0700 726 7864)
http://www.samsung.com
SLOVAKIA
0800 - SAMSUNG
http://www.samsung.com
(0800-726 786)
SPAIN
902 - 1 - SAMSUNG
(902 172 678)
http://www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
http://www.samsung.com
SWITZERLAND
0848-SAMSUNG
(7267864, CHF 0.08/min)
http://www.samsung.com/ch
U.K
0330 SAMSUNG (7267864)
http://www.samsung.com
EIRE
0818 717100
http://www.samsung.com
LITHUANIA
8-800-77777
http://www.samsung.com
LATVIA
8000-7267
http://www.samsung.com
ESTONIA
800-7267
http://www.samsung.com
TURKEY
444 77 11
http://www.samsung.com
http://www.samsung.com/ch_fr
(French)
CIS
RUSSIA
8-800-555-55-55
http://www.samsung.com
GEORGIA
8-800-555-555
http://www.samsung.com
ARMENIA
0-800-05-555
http://www.samsung.com
AZERBAIJAN
088-55-55-555
http://www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500
(GSM: 7799)
http://www.samsung.com
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com
KYRGYZSTAN
00-800-500-55-500
http://www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
http://www.samsung.com
MONGOLIA
-
http://www.samsung.com
Appendix
110
Appendix
CIS
UKRAINE
0-800-502-000
http://www.samsung.com/ua
http://www.samsung.com/
ua_ru
BELARUS
810-800-500-55-500
http://www.samsung.com
MOLDOVA
00-800-500-55-500
http://www.samsung.com
ASIA PACIFIC
AUSTRALIA
1300 362 603
http://www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com
CHINA
400-810-5858
http://www.samsung.com
HONG KONG
(852) 3698 - 4698
http://www.samsung.com/hk
http://www.samsung.com/
hk_en/
INDIA
1800 1100 11
http://www.samsung.com
3030 8282
1800 3000 8282
1800 266 8282
INDONESIA
0800-112-8888
021-5699-7777
http://www.samsung.com
JAPAN
0120-327-527
http://www.samsung.com
MALAYSIA
1800-88-9999
http://www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG (726-7864)
for PLDT
http://www.samsung.com
1-800-3-SAMSUNG (726-7864)
for Digitel
1-800-8-SAMSUNG (726-7864)
for Globe
02-5805777
SINGAPORE
1800-SAMSUNG (726-7864)
http://www.samsung.com
THAILAND
1800-29-3232
http://www.samsung.com
02-689-3232
TAIWAN
0800-329-999
http://www.samsung.com
0266-026-066
VIETNAM
1 800 588 889
http://www.samsung.com
Appendix
111
Appendix
MIDDlE EAST
IRAN
021-8255
http://www.samsung.com
OMAN
800-SAMSUNG (726-7864)
http://www.samsung.com
KUWAIT
183-2255
http://www.samsung.com
BAHRAIN
8000-4726
http://www.samsung.com
EGYPT
08000-726786
http://www.samsung.com
JORDAN
800-22273
http://www.samsung.com
MOROCCO
080 100 2255
http://www.samsung.com
SAUDI ARABIA
9200-21230
http://www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
http://www.samsung.com
AFRICA
CAMEROON
7095- 0077
http://www.samsung.com
COTE D'LVOIRE
8000 0077
http://www.samsung.com
GHANA
0800-10077
http://www.samsung.com
0302-200077
KENYA
0800 724 000
http://www.samsung.com
NIGERIA
0800-726-7864
http://www.samsung.com
SENEGAL
800-00-0077
http://www.samsung.com
SOUTH AFRICA
0860-SAMSUNG (726-7864)
http://www.samsung.com
TANZANIA
0685 88 99 00
http://www.samsung.com
UGANDA
0800 300 300
http://www.samsung.com
Appendix
112
Appendix
Correct Disposal
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of
with other household waste at the end of their working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take these items
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery
return systems.)
The marking on the battery, manual or packaging indicates that the battery in this
product should not be disposed of with other household waste. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or
lead above the reference levels in EC Directive 2006/66.
The battery incorporated in this product is not user replaceable. For information on its
replacement, please contact your service provider. Do not attempt to remove the
battery or dispose it in a fire. Do not disassemble, crush, or puncture the battery. If you
intend to discard the product, the waste collection site will take the appropriate
measures for the recycling and treatment of the product, including the battery.
Appendix
113
Appendix
Terminology
OSD(On Screen Display)
On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as
required. It allows you to change the screen brightness, tint, size and many other settings using
menus displayed on the screen.
Coarse
Coarse refers to the frequency of radio wave vibrations per second. A higher frequency transmits a
larger amount of data and is reflected easier. A lower frequency traverses obstacles more easily and
can travel farther, but it transmits a smaller amount of data. The Coarse menu allows you to manually
adjust the frequency to obtain the optimum picture quality. Adjust Coarse referring to Standard Signal
Mode Table (104page) according to the performance of your product and enjoy improved picture
quality.
Gamma
The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the
brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.
Grey scale
Scale refers to levels of color intensity that show variations of color change from darker areas to
brighter areas on the screen. Changes to the screen brightness are expressed with black and white
variation, and grey scale refers to the medium area between black and white. Changing the grey scale
through Gamma adjustment will change the medium brightness on the screen.
Scanning rate
Scanning rate, or refresh rate, refers to the frequency of screen refreshes. Screen data is transmitted
as it refreshes to display an image, although the refreshing is invisible to the naked eye. The number of
screen refreshes is called scanning rate and is measured in Hz. A scanning rate of 60Hz means that
the screen refreshes 60 times per second. The screen scanning rate depends on the performance of
the graphics cards in your PC and monitor.
Horizontal Frequency
Characters or images displayed on the monitor screen consist of numerous dots (pixels). Pixels are
transmitted in horizontal lines, which are then arranged vertically to create an image. The horizontal
frequency is measured in kHz and represents how many times horizontal lines per second are
transmitted and displayed on the monitor screen. A horizontal frequency of 85 means that the
horizontal lines that make up an image are transmitted 85 000 times per second, and the horizontal
frequency is indicated in 85kHz.
Appendix
114
Appendix
Vertical Frequency
One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and
represents how many images can be created per second by those horizontal lines. A vertical
frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is
also called "refresh rate" and affects screen flicker.
Resolution
Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the
level of display detail.
A higher resolution displays a greater amount of information on the screen and is suitable for
performing multiple tasks at the same time.
E.g. A resolution of 1920 x 1080 consists of 1,920 horizontal pixels (horizontal frequency) and 1,080
vertical lines (vertical resolution).
Plug & Play
The Plug & Play feature allows the automatic exchange of information between a monitor and PC to
produce an optimum display environment.
The monitor uses VESA DDC (international standard) to execute Plug & Play.
Appendix
115
Index
A
I
About "Zero Client" 29
Image Size 80
Auto Source 89
INFORMATION 92
Installation 25
B
Before Connecting 57
K
Blue 76
Key Repeat Time 87
Brightness 66
L
C
Languagey 83
Checking the Contents 19
Cleaning 4
Coarse 71
Color Tone 77
M
Menu Transparency 91
MultiScreen 94
Configuring Brightness in the Initial Screen 92
Connecting and Using a PC 58
Connecting the Product to a PC to Use the
"Zero Client" 30
N
Natural Color 93
Contact SAMSUNG WORLDWIDE 108
Contrast 67
Copyright 2
Correct Disposal 113
O
Off Timer On/Off 84
Off Timer Setting 85
Correct posture to use the product 13
Customized Key 88
P
D
Display Time 90
F
Fine 72
G
Gamma 78
General 101
Green 75
Parts 21
PC/AV Mode 86
PowerSaver 103
Q
Q & A 99
R
Red 74
Requirements Before Contacting Samsung
Customer Service Center 96
Index
116
Index
Reset 82
S
Safety Precautions 6
SAMSUNG MAGIC Angle 70
SAMSUNG MAGIC Bright 69
SAMSUNG MAGIC Color 73
Sharpness 68
Standard Signal Mode Table 104
T
Terminology 114
U
Using the "Zero Client" 33
Index
117
Download PDF

advertising