Samsung | LE46C | Samsung SMART Signage LE46C LED Benutzerhandbuch

LFD DISPLAY
User Manual
LE32C LE46C LE55C
The color and the appearance may differ depending on the
product, and the specifications are subject to change without
prior notice to improve the performance.
BN46-00330A-03
Table of contents
Before Using the Product
Copyright5
Safety Precautions
6
Symbols6
Cleaning6
Storage7
Electricity and Safety
7
Installation8
Operation10
Connecting to an Audio System
Installing the Wall Mount
Installing the Wall Mount Kit
Wall Mount Kit Specifications (VESA)
Connecting the network box
(Sold separately)
51
MagicInfo51
26
26
27
Remote Control (RS232C)
28
Cable Connection
28
Connection31
Control Codes
32
13
13
14
15
Parts17
Control Panel
17
Rear View
18
Anti-theft Lock
19
Remote Control
20
Connection Using an IR Stereo Cable
(sold separately)
23
Before Installing the Product (Installation
Guide)24
Tilting Angle and Rotation
24
Ventilation24
50
Input
Source List54
Before Connecting
Pre-connection Checkpoints
41
41
PIP55
PIP55
Source55
Size56
Position56
Transparency57
Connecting to a PC
Connection using the D-SUB cable
(Analog type)
Connection using a DVI cable (Digital type)
Connection Using an HDMI-DVI Cable
Connection Using an HDMI Cable
42
Edit Name57
42
43
43
44
Source AutoSwitch Settings58
Source AutoSwitch58
Primary Source Recovery58
Primary Source59
Secondary Source59
Changing the Resolution
Changing the Resolution on Windows XP
Changing the Resolution on Windows 7
45
45
46
Connecting to a Video Device
Connection Using the AV Cable
Connection Using the component Cable
Connection Using an HDMI-DVI Cable
Connection Using an HDMI Cable
47
47
48
48
49
Connecting and Using a Source
Device
Preparations
Checking the Contents
Removing the Packaging
(for LE32C and LE46C models only)
Removing the Packaging
(for LE55C models only)
Checking the Components
Dimensions25
2
Table of contents
Picture
Picture
Mode60
Mode69
Custom61
Custom70
Color Tone62
Color Tone71
Color Control62
Color Temp.71
Color Temp.63
Size72
Image Lock63
Digital NR72
Auto Adjustment64
HDMI Black Level73
Signal Balance64
Signal Balance64
Signal Control64
Film Mode73
Size65
HDMI Black Level65
PIP Picture66
Dynamic Contrast66
Picture Reset68
Speaker Select80
Sound Reset80
Setup
Language81
PIP Picture74
Time82
Clock Set82
Sleep Timer82
Timer1 / Timer2 / Timer382
Holiday Management82
Dynamic Contrast74
Menu Transparency83
Lamp Control75
Brightness Sensor75
Safety Lock83
Change PIN83
Lock83
Picture Reset76
Energy Saving84
Lamp Control67
Brightness Sensor67
Sound Select79
Sound
Mode77
Custom78
Auto Volume78
SRS TS XT79
Video Wall84
Video Wall84
Format85
Horizontal85
Vertical86
Screen Position86
Safety Screen87
Pixel Shift87
Timer88
Bar88
3
Table of contents
Eraser89
Pixel89
Side Gray90
Resolution Select90
Power On Adjustment91
OSD Rotation91
Advanced Settings92
Temperature92
Auto Power92
Button Lock93
User Auto Color93
Standby Control94
Lamp Schedule94
OSD Display95
Software Upgrade96
User Login104
Auto Set ID105
Cloning106
Command Retry
107
Getting Started with MDC
108
Main Screen Layout
109
Menus109
Screen Adjustment
111
Advanced features
114
Sound Adjustment
116
System Setup
116
Tool Settings
125
Other Functions
128
Group Management
129
Schedule Management
131
Troubleshooting Guide
133
Setup Reset97
Reset All97
Troubleshooting Guide
Using MDC
Requirements Before Contacting Samsung
Customer Service Center
135
Testing the Product
135
Checking the Resolution and Frequency
135
Check the followings.
136
Multi Control98
MDC Program Installation/Uninstallation 99
Installation99
Uninstallation99
What is MDC?
Connecting to MDC
Connection Management
Q & A
139
Specifications
General141
PowerSaver144
Preset Timing Modes
146
Appendix
Contact SAMSUNG WORLD WIDE
148
Responsibility for the Pay Service
(Cost to Customers)
156
Not a product defect
156
A Product damage caused by customer's fault 156
Others156
Correct Disposal
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
Correct disposal of batteries in this product
157
157
157
Optimum Picture Quality and Afterimage Burnin Prevention
158
Optimum Picture Quality
158
Prevention of Afterimage Burn-in
159
License161
Terminology162
100
100
103
4
Chapter 01
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2013 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
•• An administration fee may be charged if either
-- (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
-- (b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
•• The amount of such administration charge will be advised to you before any work or home visit is carried out.
5
Safety Precautions
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
――Take the following steps when cleaning.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
――Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of this product.
3
Wipe the product with a clean, soft and dry cloth.
•• Do not use detergents that contain alcohol, solvent or
surface-active agents.
This symbol alerts you that important literature concerning operation and maintenance has been
included with this product.
!
Symbols
•• Do not spray water or detergent directly on the product.
Warning
A serious or fatal injury may result if instructions are not followed.
4
Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the product.
Caution
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
5
Connect the power cord to the product when cleaning is finished.
6
Power on the product and computer.
Instructions marked by this symbol must be followed.
6
Storage
Connect the power plug to a grounded power socket (type 1 insulated
devices only).
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used
nearby.
――Contact Customer Service Center if the inside of the product needs cleaning (service fee will be
•• An electric shock or injury may result.
!
charged).
Do not bend or pull the power cord with force. Be careful not to leave the
power cord under a heavy object.
Electricity and Safety
•• Damage to the cord may result in a fire or electric shock.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Do not place the power cord or product near heat sources.
Warning
•• A fire or electric shock may result.
Do not use a damaged power cord or plug, or a loose power socket.
•• An electric shock or fire may result.
Clean any dust around the pins of the power plug or the power socket with
a dry cloth.
Do not use multiple products with a single power socket.
•• A fire may result.
•• Overheated power sockets may cause a fire.
!
Do not touch the power plug with wet hands. Otherwise, an electric shock
may result.
Insert the power plug all the way in so it is not loose.
•• An unsecure connection may cause a fire.
!
7
Installation
Caution
Do not disconnect the power cord while the product is being used.
•• The product may become damaged by an electric shock.
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•• A fire may result.
Only use the power cord provided with your product by Samsung. Do not
use the power cord with other products.
•• A fire or electric shock may result.
Have a technician install the wall-mount hanger.
•• Installation by an unqualified person can result in an injury.
!
Keep the power socket where the power cord is connected unobstructed.
•• The power cord must be disconnected to cut off power to the product
when an issue occurs.
!
•• Only use approved cabinets.
!
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
•• Note that the product is not completely powered down by using only
the power button on the remote.
•• An increased internal temperature may cause a fire.
Hold the plug when disconnecting the power cord from the power socket.
•• An electric shock or fire may result.
Install the product at least 10cm away from the wall to allow ventilation.
•• An increased internal temperature may cause a fire.
!
!
Keep the plastic packaging out of the reach of children.
•• Children may suffocate.
!
8
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.)
Caution
•• The product may fall and become damaged and/or cause an injury.
Do not drop the product while moving.
•• Using the product in an area with excess vibration may damage the
product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture
(water drips, etc.), oil, or smoke.
•• Product failure or personal injury may result.
!
Do not set down the product on its front.
•• A fire or electric shock may result.
•• The screen may become damaged.
!
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•• The product lifespan may be reduced or a fire may result.
•• The product may fall and become damaged and/or cause an injury.
•• Install the product only on cabinets or shelves of the right size.
Do not install the product within the reach of young children.
•• The product may fall and injure children.
Set down the product gently.
•• As the front is heavy, install the product on a flat and stable surface.
Edible oil, such as soybean oil, can damage or deform the product.
•• Product failure or personal injury may result.
!
Do not install the product in a kitchen or near a kitchen counter.
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport
or train station where the product should operate continuously for an
extended period of time) may seriously affect its performance.
•• Be sure to consult Samsung Customer Service Center if you want to
install the product at such a place.
9
Operation
Do not leave heavy objects or items that children like (toys, sweets, etc.) on
top of the product.
•• The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.
Warning
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
During a lightning or thunderstorm, power off the product and remove the
power cable.
•• A fire or electric shock may result.
•• A fire or electric shock may result.
•• Contact Samsung Customer Service Center for repairs.
Before moving the product, turn off the power switch and disconnect the
power cable and all other connected cables.
!
Do not drop objects on the product or apply impact.
•• Damage to the cord may result in a fire or electric shock.
•• A fire or electric shock may result.
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Center.
!
Do not move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged
cable.
•• An electric shock or fire may result.
!
Do not let children hang from the product or climb on top of it.
If a gas leakage is found, do not touch the product or power plug. Also,
ventilate the area immediately.
•• Children may become injured or seriously harmed.
•• Sparks can cause an explosion or fire.
If the product is dropped or the outer case is damaged, turn off the power
switch and disconnect the power cord. Then contact Samsung Customer
Service Center.
•• Continued use can result in a fire or electric shock.
!
GAS
Do not lift or move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged
cable.
10
Do not use or keep combustible spray or an inflammable substance near
the product.
Caution
•• An explosion or fire may result.
Leaving the screen fixed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.
!
Ensure the vents are not blocked by tablecloths or curtains.
•• Activate power-saving mode or a moving-picture screen saver if you
will not be using the product for an extended period of time.
!
•• An increased internal temperature may cause a fire.
-_100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
•• Dust accumulation combined with heat can cause a fire, electric shock
or electric leakage.
!
Use the product at the recommended resolution and frequency.
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Center.
•• Product failure, an electric shock or fire may result.
Disconnect the power cord from the power socket if you do not plan on
using the product for an extended period of time (vacation, etc).
•• Your eyesight may deteriorate.
!
Do not hold the product upside-down or move it by holding the stand.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
•• The product may fall and become damaged or cause an injury.
•• Be sure to power off the product and disconnect the power cord
when water or other foreign substances have entered the product.
Then contact Samsung Customer Service Center.
•• Product failure, an electric shock or fire may result.
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
!
Do not use humidifiers or stoves around the product.
•• A fire or electric shock may result.
11
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Be careful that children do not place the battery in their mouths when
removed from the remote control. Place the battery in a location that
children or infants cannot reach.
•• Eye fatigue will be relieved.
•• If children have had the battery in their mouths, consult your doctor
immediately.
!
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
When replacing the battery, insert it with the right polarity (+, -).
Store small accessories out of the reach of children.
Use only the specified standardized batteries, and do not use a new battery
and a used battery at the same time.
•• Otherwise, the battery may become damaged or it may cause fire,
personal injury or damage due to leakage of the internal liquid.
•• Otherwise, the batteries may be damaged or cause fire, personal injury
or damage due to a leakage of the internal liquid.
!
!
Exercise caution when adjusting the product angle or stand height.
The batteries (and rechargeable batteries) are not ordinary refuse and must
be returned for recycling purposes. The customer is responsible for returning
the used or rechargeable batteries for recycling.
•• Your hand or finger may get stuck and injured.
!
•• Tilting the product at an excessive angle may cause the product to fall
and an injury may result.
Do not place heavy objects on the product.
!
•• The customer can return used or rechargeable batteries to a nearby
public recycling center or to a store selling the same type of the
battery or rechargeable battery.
•• Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
•• Having the sound too loud may damage your hearing.
12
Chapter 02
Preparations
Checking the Contents
2
Remove the styrofoam from the product.
3
Check the product and remove the styrofoam and plastic bag.
Removing the Packaging
(for LE32C and LE46C models only)
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
1
Remove the black locking device at the bottom of the box.
――The appearance of the actual product may differ from the image shown.
――This image is for reference only.
4
Store the box in a dry area so that it can be used when moving the product in the future.
13
Removing the Packaging (for LE55C models only)
2
Using the grooves in the box, lift and remove the top of the box.
3
Check the components and remove the styrofoam and plastic bag.
――The following images are for reference only. Real-life situations may differ from what is shown in the
images.
1
Remove the black locking device at the bottom of the box.
1
2
3
――The appearance of actual components may differ from the image shown.
4
Store the box in a dry area so that it can be used when moving the product in the future.
14
Checking the Components
-- Contact the vendor where you
purchased the product if any
components are missing.
Components
――Components may differ in different locations.
-- The appearance of the components and
items sold separately may differ from the
image shown.
Quick setup guide
Warranty card
User manual
MagicInfo Lite Edition Software
CD
Power cord
D-SUB cable (P.42)
(Not available in some
locations)
-
+
-
-- A stand is not provided with the product.
To install a stand, you can purchase one
separately.
+
Batteries (P.21)
Remote Control (P.20)
(Not available in some locations)
Cover Screw
15
Items sold separately
-- The following items can be purchased
at your nearest retailer.
Wall-mount Kit
Stand
RS232C-Stereo cable (P.100)
DVI cable (P.43)
HDMI-DVI cable (P.43)
HDMI cable (P.44)
Video cable (P.47)
Stereo cable (P.23)
Component cable (P.48)
RCA stereo cable (P.50)
RCA cable (P.47)
AV/Component Adapter (P.47)
AUDIO Adapter (P.47)
LAN cable (P.101)
External sensor Kit (P.23)
RS232C(IN) Adapter
RS232C(OUT) Adapter
PIM
16
Parts
――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve
Control Panel
Buttons
quality.
Description
Brightness Sensor (Optional)
Automatically detects the surrounding brightness it accordingly.
――This function is activated only on the models equipped with an auto brightness
sensor.
Power indicator
Shows PowerSaver mode by blinking green
See PowerSaver described in the manual for further information regarding power
saving functions.
――For energy conservation, turn your LCD Display OFF when it is not needed or
when leaving it unattended for long periods.
Remote sensor
Aim the remote control towards this spot on the LCD Display.
――Using other display devices in the same space as the remote control of this
product can cause the other display devices to be inadvertently controlled.
17
Rear View
Port
――The color and shape of parts may differ from what is shown. Specifications are
DVI IN
Connects to a source device using a DVI cable or HDMI-DVI cable.
HDMI IN 1, HDMI IN 2
Connects to a source device using an HDMI cable.
CONTROL IN
Supplies power to the external sensor board or receives the light sensor signal.
IR OUT
Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.
RGB IN
Connects to a source device using a D-SUB cable.
AV / COMPONENT IN
Connects to a source device using the AV/component adapter.
RGB / DVI / HDMI / AV / COMPONENT /
AUDIO IN
Receives sound from a PC via an audio cable.
RGB / DVI / HDMI / AV / COMPONENT /
AUDIO OUT
Connects to the audio of a source device.
RS232C IN
Connects to MDC using an RS232C-stereo adapter.
subject to change without notice to improve quality.
DVI IN
Description
HDMI IN 1
HDMI IN 2
POWER
ON
CONTROL IN
RS232C OUT
IR OUT
RJ45 MDC
Connects to MDC using a LAN cable.
LE32C
RGB IN
AV/
COMPONENT IN
IN
OUT
RGB/DVI/
HDMI/AV/
COMPONENT
AUDIO
RGB IN
AV/
COMPONENT IN
RGB/DVI
HDMI/ AV/
COMPONENT
AUDIO
IN
OUT
IN
OUT
RS232C
RJ45 MDC
RS232C
RJ45 MDC
LE46C, LE55C
IN
OUT
18
Anti-theft Lock
――An anti-theft lock allows you to use the product securely even in public places.
――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
To lock an anti-theft locking device:
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
-- An anti-theft locking device can be purchased separately.
-- Refer to the user guide provided with your anti-theft locking device for details.
-- Anti-theft locking devices can be purchased at electronics retailers or online.
19
Remote Control
――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
OFF
Power on the product.
.QZ
ABC
DEF
GHI
JKL
MNO
1
4
5
3
6
PRS
TUV
WXY
DEL-/--
SYMBOL
MUTE
7
Adjust the volume.
Select a connected source device.
2
8
0
Power off the product.
Enter the password in the OSD menu, or change
the channel.
-- Remote control button functions may
differ for different products.
9
Mute the sound.
Unmuting the sound: Press MUTE again or press
the volume control (+ VOL -) button.
CONTENT
(HOME)
VOL
MagicInfo
Lite/S
SOURCE
CH
MENU
BLANK
Display or hide the onscreen display menu, or
return to the previous menu.
20
TOOLS
Return to the previous menu.
INFO
RETURN
EXIT
PC
DVI
HDMI
DP
A
B
C
D
MagicInfo
3D
LOCK
Display information on the screen.
Move to the upper, lower, left or right menu, or
adjust an option's setting.
Activates a highlighted menu item.
Exit the current menu.
Manually select a connected input source from
PC, DVI, or HDMI..
It sets safe lock function.
MagicInfo Quick Launch Button.
MagicInfo can only be enabled when a network
box is connected.
This button is disabled for products that do not
support MagicInfo.
-- Remote control button functions may
differ for different products.
To place batteries in the remote control
21
Adjusting the OSD with the Remote Control
Description
1
Open the OSD menu.
2
Select from Input, Picture, Sound, Setup or Multi
Control in the displayed OSD menu screen.
3
4
7m ~ 10m
Buttons
Remote Control Reception Range
30˚
30˚
Change settings as desired.
Finish setting.
Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the
left and right.
――Store used batteries out of reach of children and recycle.
――Do not use a new and used battery together. Replace both batteries at the same time.
――Remove batteries when the remote control is not to be used for an extended period of time.
5
Close the onscreen display (OSD) menu.
22
Connection Using an IR Stereo Cable
(sold separately)
1
2
Turn off the device before connecting the External Sensor Kit. After it is connected,
turn on the device.
Controlling more than one display product using
your remote control
IR OUT
CONTROL IN
•• Connect the IR OUT port on the product to the CONTROL IN port on the
other display product using the dedicated stereo cable.
•• A command sent from the remote control pointed at product
received by both display products 1 and 2 .
――The appearance may differ depending on the product.
1 will be
Controlling more than one display product using an
external sensor kit (sold separately)
•• A command sent from the remote control pointed at product 1 (to
which the external sensor kit is connected) will be received by both display
products 1 and 2 .
――The appearance may differ depending on the product.
1
2
POWER
IR OUT
CONTROL IN
SOURCE
CONTROL IN
23
Before Installing the Product
(Installation Guide)
――To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
-- Ensure that an authorized installation company installs the wall mount.
-- Otherwise, it may fall and cause personal injury.
-- Make sure to install the specified wall mount.
Tilting Angle and Rotation
15 ˚
――Contact Samsung Customer Service Center for further details.
•• The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
•• To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35 C
A
•• When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface
for ventilation and ensure that the ambient A temperature is kept below 35 C.
B
Figure 1.1 Side view
24
Installation on an Indented Wall
Figure 1.3 Side view
――Contact Samsung Customer Service Center for further details.
B
D
D
Plane view
A Minimum 40 mm
B Minimum 70 mm
A
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35 C
――When installing the product on an indented wall, allow at least the space specified above between the product and wall for
ventilation and ensure that the ambient temperature is kept below 35 C.
C
E
Figure 1.2 Side view
Dimensions
Unit: mm (inches)
Model name
5
1
2
4
3
1
1 2
23
34
45
LE32C
744.0 (29.3)
698.4 (27.5)
392.85 (15.5)
452.7 (17.8)
65.9 (2.6)
LE46C
1061.0 (41.8)
1018.08 (40.1)
572.67 (22.5)
619.8 (24.4)
51.7 (2.0)
LE55C
1252.4 (49.3)
1209.6 (47.6)
680.4 (26.8)
727.7 (28.6)
51.7 (2.0)
――All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors.
25
Installing the Wall Mount
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
wall mount on your own.
26
Wall Mount Kit Specifications (VESA)
――Install your wall mount on a solid wall perpendicular to the floor.
Before attaching the wall mount to surfaces other than plaster board, please
contact your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe
personal injury.
•• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
•• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
•• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
•• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
•• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
•• Do not mount the product at more than a 15 degree tilt.
•• Always have two people mount the product on a wall.
•• Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
Model name
VESA screw hole specs (A * B) in
millimeters
LE32C
200 × 200 (7.9 X 7.9)
LE46C
400 × 400 (15.7 X 15.7)
Standard Screw
Quantity
M6
4
M8
LE55C
400 × 400 (15.7 X 15.7)
――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric shock.
27
Remote Control (RS232C)
•• Pin assignment
1 2 3 4 5
Cable Connection
RS232C Cable
Interface
RS232C (9 pins)
Pin
TxD (No.2), RxD (No.3), GND (No.5)
Bit rate
9600 bps
Data bits
8 bit
Parity
None
Stop bit
1 bit
Flow control
None
Maximum length
15 m (only shielded type)
6 7 8 9
Pin
Signal
1
Detect data carrier
2
Received data
3
Transmitted data
4
Prepare data terminal
5
Signal ground
6
Prepare data set
7
Send request
8
Clear to send
9
Ring indicator
28
LAN Cable
•• RS232C cable
Connector: 9-Pin D-Sub to Stereo Cable
9
•• Pin assignment
3
2
1
5
1 2 3 4 5 6 7 8
-P2-
6
-P1-
1
-P1Female
-P1-
-P2-
-P2-
Rx
2
-------->
3
Tx
STEREO
Tx
3
<--------
2
Rx
PLUG
Gnd
5
----------
5
Gnd
(3.5ø)
Pin No
Standard Colour
Signal
1
White and orange
TX+
2
Orange
TX-
3
White and green
RX+
4
Blue
NC
5
White and blue
NC
6
Green
RX-
7
White and brown
NC
8
Brown
NC
29
Cross LAN cable (PC to PC)
•• Connector : RJ45
Direct LAN cable (PC to HUB)
HUB
P1
P2
Signal
P1
P2
Signal
TX+
1
<-------->
3
RX+
RJ45
P2
RJ45
P1
P1
P2
RJ45 MDC
P2
Signal
TX-
2
<-------->
6
RX-
<-------->
1
TX+
RX+
3
<-------->
1
TX+
2
<-------->
2
TX-
RX-
6
<-------->
2
TX-
RX+
3
<-------->
3
RX+
RX-
6
<-------->
6
RX-
Signal
P1
TX+
1
TX-
30
Connection
•• Connection 2
•• Connection 1
RJ45
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
RJ45
OUT
•• Connection 3
RJ45
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
31
No.
Control Codes
Viewing control state (Get control command)
Header
Command
0xAA
Command type
ID
Data length
Command
0xAA
Command type
Command type
10
Video Wall On
0x84
0~1
11
Video Wall User Control
0x89
-
E.g. Power On & ID=0
Data length
Data
1
Value
Checksum
Command
No.
Value range
•• All communications take place in hexadecimals. The checksum is calculated by adding up all
values except the header. If a checksum adds up to be more than 2 digits as shown below
(11+FF+01+01=112), the first digit is removed.
0
ID
Command
Checksum
Controlling (Set control command)
Header
Command type
Command
Value range
1
Power control
0x11
0~1
2
Volume control
0x12
0~100
3
Input source control
0x14
-
4
Screen mode control
0x18
-
5
Screen size control
0x19
0~255
6
PIP on/off control
0x3C
0~1
7
Auto adjustment control (PC and
BNC only)
0x3D
0
8
Video wall mode control
0x5C
0~1
9
Safety Lock
0x5D
0~1
Header
Command
0xAA
0x11
Header
Command
0xAA
0x11
ID
ID
Data length
Data 1
1
"Power"
Data length
Data 1
1
1
Checksum
12
•• To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as
"0xFE" and transmit commands. Commands will be executed by each device but ACK will not
respond.
32
Power control
Volume control
•• Function
A product can be powered on and off using a PC.
•• Function
The volume of a product can be adjusted using a PC.
•• Viewing power state (Get Power ON / OFF Status)
•• Viewing volume state (Get Volume Status)
Header
Command
0xAA
0x11
ID
Data length
Checksum
0
•• Setting power ON/Off (Set Power ON / OFF)
Header
Command
0xAA
0x11
ID
Header
Command
0xAA
0x12
Data length
Data
1
"Power"
Checksum
Header
Command
0xAA
0x12
•• Ack
0: Power OFF
Header
Command
0xAA
0xFF
•• Ack
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x11
"Power"
Checksum
0xAA
0xFF
ID
ID
Data length
Data
1
"Volume"
Checksum
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x11
"ERR"
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x12
"Volume"
Checksum
•• Nak
•• Nak
Command
0
"Volume": Volume value code to be set on a product. (0-100)
"Power": Power code to be set on a product.
Header
Checksum
"Volume": Volume value code to be set on a product. (0-100)
1: Power ON
Command
Data length
•• Setting the volume (Set Volume)
"Power": Power code to be set on a product.
Header
ID
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x12
"ERR"
Checksum
"ERR" : A code showing what error has occurred.
"ERR" : A code showing what error has occurred.
33
Input source control
0x24
HDMI2_PC
•• Function
The input source of a product can be changed using a PC.
0x25
DisplayPort
――DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to
•• Viewing input source state (Get Input Source Status)
Header
Command
0xAA
0x14
ID
Data length
"Get" commands.
――This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports.
Checksum
――MagicInfo is only available with models that contain the MagicInfo function.
0
――RF(TV), DTV are only available with models that include a TV.
•• Setting the input source (Set Input Source)
Header
Command
0xAA
0x14
ID
•• Ack
Data length
Data
1
"Input Source"
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x14
"Input
Source"
"Input Source": An input source code to be set on a product.
0x14
PC
0x18
DVI
0x0C
Input source
0x08
Component
0x20
MagicInfo
0x1F
DVI_video
0x30
RF(TV)
0x40
DTV
0x21
HDMI1
0x22
HDMI1_PC
0x23
HDMI2
Checksum
"Input Source": An input source code to be set on a product.
•• Nak
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x14
"ERR"
Checksum
"ERR" : A code showing what error has occurred.
34
Screen mode control
•• Nak
•• Function
The screen mode of a product can be changed using a PC.
Screen mode cannot be controlled when the Video Wall function is enabled.
――This control can only be used on models that include a TV.
Command
0xAA
0x18
ID
Data length
0xAA
ID
0x18
16 : 9
0x04
Zoom
0x31
Wide Zoom
0x0B
4:3
Ack/Nak
r-CMD
Val1
3
'N'
0x18
"ERR"
Checksum
•• Viewing the screen size (Get Screen Size Status)
Data
length
Data
Checksum
1
"Screen Mode"
Header
Command
0xAA
0x19
ID
Data length
Checksum
0
•• Ack
"Screen Mode": A code that sets the product status
0x01
0xFF
Data length
•• Function
The screen size of a product can be changed using a PC.
0
Command
0xAA
ID
Screen size control
Checksum
•• Setting the picture size (Set Picture Size)
Header
Command
"ERR": A code showing what error has occurred
•• Viewing screen status (Get Screen Mode Status)
Header
Header
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x19
"Screen Size"
Checksum
"Screen Size": product screen size (range: 0 – 255, unit: inch)
•• Nak
Header
Command
0xAA
0xFF
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x18
"Screen
Mode"
Checksum
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x19
"ERR"
Checksum
"ERR": A code showing what error has occurred
"Screen Mode": A code that sets the product status
35
PIP On/Off control
Auto adjustment control (PC and BNC only)
•• Function
The PIP mode of a product can be turned on or off using a PC.
•• Function
Automatically adjust the PC system screen using a PC.
――Only available on models that have the PIP function.
――The mode cannot be controlled if Video Wall is set to On.
•• Viewing auto adjustment state (Get Auto Adjustment Status)
None
――This function is not available in MagicInfo.
•• Setting auto adjustment (Set Auto Adjustment)
•• Viewing PIP on/off state (Get the PIP ON / OFF Status)
Header
Command
0xAA
0x3C
ID
Data length
Checksum
Command
0xAA
0x3C
Command
0xAA
0x3D
ID
Data length
Data
1
"Auto
Adjustment"
0
ID
Checksum
"Auto Adjustment" : 0x00 (at all times)
•• Setting PIP on/off (Set the PIP ON / OFF)
Header
Header
Data length
Data
1
"PIP"
•• Ack
Checksum
"PIP": A code used to turn the PIP mode of a product on or off
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3D
"Auto
Adjustment"
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3D
"ERR"
1: PIP ON
0: PIP OFF
Checksum
•• Nak
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3C
"PIP"
Checksum
Header
Command
0xAA
0xFF
ID
Checksum
"ERR": A code showing what error has occurred
"PIP": A code used to turn the PIP mode of a product on or off
•• Nak
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x3C
"PIP"
Checksum
"ERR": A code showing what error has occurred
36
Video Wall Mode Control
Safety Lock
•• Function
Video Wall mode can be activated on a product using a PC.
•• Function
PC can be used to turn the Safety Lock function on or off on a product.
This control is only available on a product whose Video Wall is enabled.
This control is available regardless of whether or not the power is turned on.
•• Viewing video wall mode (Get Video Wall Mode)
Header
Command
0xAA
0x5C
ID
Data length
•• Viewing the safety lock state (Get Safety Lock Status)
Checksum
0
•• Setting the video wall (Set Video Wall Mode)
Header
Command
0xAA
0x5C
ID
Header
Command
0xAA
0x5D
ID
Data length
Checksum
0
•• Enabling or disabling safety lock (Set Safety Lock Enable / Disable)
Data length
Data
Checksum
1
"Video Wall Mode"
Header
Command
0xAA
0x5D
ID
Data length
Data
1
"Safety Lock"
"Video Wall Mode": A code used to activate Video Wall mode on a product
"Safety Lock": Safety lock code to be set on a product
1: Full
1: ON
0: Natural
0: OFF
Checksum
•• Ack
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"Video Wall
Mode"
Checksum
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5D
"Safety Lock"
Checksum
"Safety Lock": Safety lock code to be set on a product
"Video Wall Mode": A code used to activate Video Wall mode on a product
•• Nak
•• Nak
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"ERR"
Header
Command
0xAA
0xFF
Checksum
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x5D
"ERR"
Checksum
"ERR": A code showing what error has occurred
"ERR": A code showing what error has occurred
37
Video Wall On
•• Nak
•• Function
Turn Video Wall on or off on the product from your computer.
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x84
ERR
Checksum
•• Get Video Wall On/Off Status
Header
Command
0xAA
0x84
ID
Data length
"ERR": A code showing what error has occurred
Checksum
Video Wall User Control
0
•• Function
Turn the Video Wall function on or off on the product from your computer.
•• Set Video Wall On/Off
Header
Command
0xAA
0x84
ID
Data length
Data
Checksum
1
V.Wall_On
•• Get Video Wall Status
•• V.Wall_On: Video Wall code to be assigned to the product
1: Video Wall ON
•• Ack
Command
0xAA
0xFF
Command
0xAA
0x89
ID
Data length
Checksum
0
•• Set Video Wall
0: Video Wall OFF
Header
Header
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x84
V.Wall_
On
Checksum
Header
Command
0xAA
0x89
ID
Data length
Val1
Val2
2
Wall_Div
Wall_SNo
Checksum
Wall_Div: Video Wall Divider code assigned to the product
V.Wall_On : Same as above
38
10x10 Video Wall Model
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Off
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
1
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
0x19
0x1A
0x1B
0x1C
0x1D
0x1E
0x1F
2
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2A
0x2B
0x2C
0x2D
0x2E
0x2F
3
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x38
0x39
0x3A
0x3B
0x3C
0x3D
0x3E
0x3F
4
0x41
0x42
0x43
0x44
0x45
0x46
0x47
0x48
0x49
0x4A
0x4B
0x4C
0x4D
0x4E
0x4F
5
0x51
0x52
0x53
0x54
0x55
0x56
0x57
0x58
0x59
0x5A
0x5B
0x5C
0x5D
0x5E
0x5F
6
0x61
0x62
0x63
0x64
0x65
0x66
0x67
0x68
0x69
0x6A
0x6B
0x6C
0x6D
0x6E
0x6F
7
0x71
0x72
0x73
0x74
0x75
0x76
0x77
0x78
0x79
0x7A
0x7B
0x7C
0x7D
0x7E
N/A
8
0x81
0x82
0x83
0x84
0x85
0x86
0x87
0x88
0x89
0x8A
0x8B
0x8C
N/A
N/A
N/A
9
0x91
0x92
0x93
0x94
0x95
0x96
0x97
0x98
0x99
0x9A
0x9B
N/A
N/A
N/A
N/A
10
0xA1
0xA2
0xA3
0xA4
0xA5
0xA6
0xA7
0xA8
0xA9
0xAA
N/A
N/A
N/A
N/A
N/A
11
0xB1
0xB2
0xB3
0xB4
0xB5
0xB6
0xB7
0xB8
0xB9
N/A
N/A
N/A
N/A
N/A
N/A
12
0xC1
0xC2
0xC3
0xC4
0xC5
0xC6
0xC7
0xC8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
13
0xD1
0xD2
0xD3
0xD4
0xD5
0xD6
0xD7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
14
0xE1
0xE2
0xE3
0xE4
0xE5
0xE6
0xE7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
15
0xF1
0xF2
0xF3
0xF4
0xF5
0xF6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
39
10x10 Video Wall Model : ( 1 ~ 100)
Set Number
Data
1
0x01
2
0x02
...
...
99
0x63
100
0x64
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
Val2
4
'A'
0x89
Wall_Div
Wall_SNo
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x89
ERR
Checksum
•• Nak
Header
Command
0xAA
0xFF
ID
Checksum
"ERR": A code showing what error has occurred
40
Chapter 03
Connecting and Using a Source Device
Before Connecting
Check the following before you connect this product with other devices.
Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players.
Pre-connection Checkpoints
――Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to
device.
――Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
――Connect the sound ports correctly: left = white and right = red.
――Check the types of ports at the back of the product you want to connect.
41
Connecting to a PC
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
――Connecting parts may differ in different products.
Connection using the D-SUB cable
(Analog type)
RGB IN
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO IN
42
Connection using a DVI cable (Digital type)
DVI IN
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO IN
Connection Using an HDMI-DVI Cable
――When you connect a PC to the product using an HDMI-DVI cable, set Edit
Name to DVI PC to access video and audio content stored on the PC.
HDMI IN 1, HDMI IN 2
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO IN
43
Connection Using an HDMI Cable
HDMI IN 1, HDMI IN 2
44
Changing the Resolution
――Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality.
――The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Changing the Resolution on Windows XP
Go to Control Panel
Display
Settings, and change the resolution.
Changing the Resolution on Windows Vista
Go to Control Panel
Personal Settings
Display Settings, and change the resolution.
45
Changing the Resolution on Windows 7
Go to Control Panel
Display
Screen Resolution, and change the resolution.
Changing the Resolution on Windows 8
Go to Settings
Control Panel
Display
Screen Resolution, and change the resolution.
46
Connecting to a Video Device
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• You can connect a video device to the product using a cable.
――Connecting parts may differ in different products.
――Press the SOURCE button on the remote control to change the source.
Connection Using the AV Cable
AV / COMPONENT IN
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO IN
47
Connection Using the component Cable
AV / COMPONENT IN
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO IN
Connection Using an HDMI-DVI Cable
――Audio will not be enabled if the product is connected to a video device using
an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the
audio ports on the product and video device.
When you connect a video device to the product using an HDMI-DVI cable, set
Edit Name to DVI Devices to access video and audio content stored on the
video device.
――Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and
HDMI IN 1, HDMI IN 2
576p.
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO IN
48
Connection Using an HDMI Cable
Using an HDMI cable or HDMI-DVI Cable
(up to 1080p)
•• For better picture and audio quality, connect to a digital device using an
HDMI cable.
•• An HDMI cable supports digital video and audio signals, and does not
require an audio cable.
-- To connect the product to a digital device that does not support HDMI
output, use an HDMI-DVI and audio cables.
HDMI IN 1, HDMI IN 2
•• The picture may not display normally (if at all) or the audio may not work if
an external device that uses an older version of HDMI mode is connected to
the product. If such a problem occurs, ask the manufacturer of the external
device about the HDMI version and, if out of date, request an upgrade.
•• Be sure to use an HDMI cable with a thickness of 14 mm or less.
•• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not
display or a connection error may occur.
•• A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
49
Connecting to an Audio System
――Connecting parts may differ in different products.
RGB / DVI / HDMI / AV / COMPONENT
/ AUDIO OUT
50
Connecting the network box (Sold separately)
――For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase.
MagicInfo
To use MagicInfo, a network box (sold separately) must be connected to the product.
――To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.
――For details on how to use MagicInfo, refer to the DVD provided with the network box.
――The information in this section is subject to change without notice for quality improvement.
――If a problem occurs after installing an operating system other than the one provided with the network box, restoring the previous version of the operating system, or
installing software that is not compatible with the operating system provided, you will not be able to benefit from technical support and will be charged a fee for a visit
from a service technician. A product exchange or refund will also not be available.
Entering MagicInfo mode
MagicInfo Setup Wizard - v.1.12
Select Application - step 1
MagicInfo Pro (LAN, WAN based version)
MagicInfo-i Premium (Web-based version)
1
After installing and connecting the network box (sold separately) to the product, power on the product.
2
Press SOURCE on the remote control, and select MagicInfo.
3
Select the default application you want to run when MagicInfo starts.
Select Later
< Back(B)
Next(N) >
Finish
Cancel
51
MagicInfo Setup Wizard - v.1.12
4
Enter the IP information.
5
Select a language. (The default language is English.)
Select TCP/IP - step 2
Obtain an IP address automatically
Use the following IP address:
IP address:
192 . 168 . 0 . 102
Subnet mask:
255 . 255 . 255 . 0
Default gateway:
192 . 168 . 0 . 1
Obtain DNS server address automatically
Use the following DNS server address:
Preferred DNS server:
10 . 44 . 33 . 22
Alternate DNS server:
10 . 33 . 22 . 11
< Back(B)
Next(N) >
Finish
Cancel
MagicInfo Setup Wizard - v.1.12
Select Language -step 3
Select the language you want to install on the system for menus and
dialogs.
Current Language
:
Engilsh
Chinese [Traditional]
German
English
French
Italian
Japanese
Korean
Russian
Swedish
Turkish
Chinese [Simplified]
Portuguese
< Back(B)
Next(N) >
Finish
Cancel
52
MagicInfo Setup Wizard - v.1.12
6
Select a display mode.
7
Double-check the settings you have just configured.
Select Screen Type - step 4
Landscape
Portrait
< Back(B)
Next(N) >
Finish
Cancel
MagicInfo Setup Wizard - v.1.12
――If the execution icon does not appear, double-click the MagicInfo icon on the desktop. The icon will appear at the bottom
Setup Information
1. Application :
right of the screen.
MagicInfo Pro [LAN,WAN based version\
2. Internet Protocol [TCP/IP]
IP :
192.168.0.102
3. Language :
4. Screen Type :
English
Landscape
Do not show again
< Back(B)
Apply
Finish
Cancel
53
Chapter 04
Input
Source List
MENU m :Input
T
Use to select PC, HDMI or other external input sources connected to the LCD Display.
Use to select the screen of your choice.
Source List
ENTER
Source List
PC
DVI
AV
Component
HDMI1
HDMI2
MagicInfo
TV
Move
:---:---:---:---:---:---:---:---Enter
Return
1
PC
2
DVI
3
AV
4
Component
5
HDMI1
6
HDMI2
This is deactivated when a network box is installed.
-- The displayed image may differ depending on the model.
7
MagicInfo
Activated when a network box is connected.
8
TV
54
PIP
Turns the PIP Screen Off/On.
•• Off / On
――PIP turns off when the LCD Display is switched to an external source.
PIP
――If you select
,
,
in Size, Position and Transparency will not be activated.
――The PIP function is not available when Video Wall is On.
PIP
PIP
Source
Size
Position
Transparency
Move
Off
:On
►
:PC
On
:
:
:Medium
Enter
――When external AV devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch video from
those devices in a small window super-imposed on the PC Video signal.
Return
-- The displayed image may differ depending on the model.
Source
Selects the input source for the PIP.
Primary Source
PIP
PIP
Source
Size
Position
Transparency
Move
:On
:HDMI
DVI 1
:AV
AV
:---HDMI1
:투명하게
HDMI2
Enter
Return
-- The displayed image may differ depending on the model.
Secondary Source
PC
DVI, AV, HDMI1, HDMI2
DVI
PC
AV
PC
HDMI1
PC
HDMI2
PC
PIM
PC, AV , Component
――PIP is disabled if the primary screen does not receive a signal.
55
Size
Changes the Size of the PIP window.
――Picture > Size will be changed to 16:9when PIP is On.
PIP
PIP
Source
Size
Position
Transparency
Move
:On
:HDMI 1
:---:---:투명하게
Enter
Return
-- The displayed image may differ depending on the model.
Position
Changes the Position of the PIP window.
PIP
PIP
Source
Size
Position
Transparency
Move
:On
:HDMI 1
:---:---:투명하게
Enter
Return
-- The displayed image may differ depending on the model.
56
Transparency
Adjusts the Transparency of PIP windows.
•• High
•• Medium
PIP
PIP
Source
Size
Position
Transparency
Move
•• Low
:On
:HDMI 1
:---:---:투명하게
High
Medium
Low
Opaque
Enter
•• Opaque
Return
-- The displayed image may differ depending on the model.
Edit Name
Name the input device connected to the input jacks to make your input source selection easier.
VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR /
PC / DVI PC / DVI Devices
――The displayed devices differ depending on the external input mode.
Edit Name
PC
DVI
AV
Component
HDMI1
HDMI2
:---:---:---:---:---:----
▶
▶
▶
▶
▶
▶
When connecting a PC to the HDMI terminal, set Edit Name to PC. In other cases, set Edit Name to AV. However, since
640x480, 720p (1280x720), and 1080p (1920x1080) are common signals for AV and PC, make sure to set the Edit Name in
accordance with the input signal.
――The Picture menu changes depending on the input signal and Edit Name.
When using a HDMI-DVI cable connection (which does not support audio and video at the same time), the audio port
should be connected via a separate audio cable.
When a PC is connected, set Edit Name to DVI PC to enjoy the video and audio from the connected PC.
Move
Enter
Return
When an AV device is connected, set Edit Name to DVI Devices to enjoy the video and audio from the connected AV
device.
-- The displayed image may differ depending on the model.
57
Source AutoSwitch Settings
Source AutoSwitch
Source AutoSwitch Settings
: On
Off
Source AutoSwitch
On
: On
Primary Source Recovery
Primary Source
: DVI
Secondary Source
: PC
When the Source AutoSwitch is On, the display video source will automatically be searched for active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video source is available. If the primary or secondary source is
not recognized, the display will search again, if no active video is found the display will show the no-input-signal message.
When the Primary Source selection is set to All, the display will search all the video source inputs twice in sequence looking
for an active video source, returning back to the first video source in the sequence if no video is found.
•• Off / On
――Source AutoSwitch selection and PIP function: If the Source AutoSwitch selection is set to On, the PIP function will not
work, the Source AutoSwitch selection must be set to Off, for the PIP feature to work.
――When the Source AutoSwitch selection is On, and or the Primary Source Recovery is On, the display power saving mode
becomes inactive.
――When Primary Source Recovery is On, only the Primary Source and Secondary Source selection are available and they
are interchangeable and selectable at will. Refer to PIP > Source for compatible signals for each primary input source.
Move
Enter
Return
-- The displayed image may differ depending on the model.
-- Source AutoSwitch Settings is disabled if PIP is set to On.
Primary Source Recovery
When Primary Source Recovery is On, only the Primary Source and Secondary Source video source selection will be
searched for active video.
Source AutoSwitch Settings
: On
Source AutoSwitch
: On
Off
Primary Source Recovery
On
:
Primary Source
Secondary Source
: PC
Move
Enter
The Primary Source will be selected if active video is found, if no video is found, the Secondary Source will be selected, if no
video is found in Secondary Source again, the no-input-signal is displayed.
•• Off / On
Return
-- The displayed image may differ depending on the model.
58
Primary Source
Specify Primary Source for the automatic input source.
Source AutoSwitch Settings
Source AutoSwitch
Primary Source Recovery
:
Primary Source
:
Secondary Source
Move
Enter
: On
: On
DVI
Return
-- The displayed image may differ depending on the model.
Secondary Source
Specify Secondary Source for the automatic input source.
Source AutoSwitch Settings
Source AutoSwitch
Primary Source Recovery
:
Primary Source
:
Secondary Source
Move
Enter
: On
: On
PC
DVI
Return
-- The displayed image may differ depending on the model.
59
Chapter 05
Picture
PC / DVI / MagicInfo Mode
Mode
MENU m :Picture
T
Mode
ENTER
The LCD Display has four automatic picture settings ("Information", "Advertisement" and "Custom") that are preset at the
factory.
Picture
Mode
Custom
Color Tone
Color Control
Color Temp.
Image Lock
Auto Adjustment
Information
:사용자
조정
Advertisement
:---Custom
•• Advertisement
Recommended for displaying advertisements (e.g. videos or indoor or outdoor ads).
•• Custom
――Not available when Dynamic Contrast is set to On.
▶
More
Move
•• Information
Recommended for communicating exact information (e.g. public information).
Enter
Return
-- The displayed image may differ depending on the model.
60
Custom
By using the on-screen menus, the contrast and brightness can be changed to your personal preference.
――By adjusting the picture using the Custom function, Mode will change to Custom mode.
――Not available when Dynamic Contrast is set to On.
Custom
Contrast
Brightness
Sharpness
Gamma
Move
90
90
50
: Natural
Mode1
Mode2
Mode3
Enter
Contrast
Adjusts the Contrast.
Brightness
Adjusts the Brightness.
Return
Sharpness
Adjusts the Sharpness.
-- The displayed image may differ depending on the model.
Gamma
Adjust the mid-range brightness (Gamma) for the picture.
•• Natural
•• Mode1
Sets the picture brighter than Natural.
•• Mode2
Sets the picture darker than Mode1.
•• Mode3
Increases the contrast between dark and bright colors.
61
Color Tone
The Color tones can be changed.
――Not available when Dynamic Contrast is set to On.
•• Off / Cool / Normal / Warm / Custom
――If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp. function is disabled.
――If you set the Color Tone to Off, the Color Control function is disabled
Picture
: Custom
Off
: 16:9
Cool
Normal
: 16:9
Warm
: 동작
Custom
: 일반
▶
Mode
Custom
Color Tone
Color Control
Color Temp.
Image Lock
Auto Adjustment
More
Move
Enter
Return
-- The displayed image may differ depending on the model.
Color Control
Adjusts individual Red, Green, Blue Color balance.
――Not available when Dynamic Contrast is set to On.
•• Red / Green / Blue
Color Control
50
50
50
Red
Green
Blue
Move
Enter
Return
-- The displayed image may differ depending on the model.
62
Color Temp.
Color Temp. is a measure of the 'warmth' of the image Colors.
――This function is enabled when Mode is set to Custom, and Dynamic Contrast and Color Tone are Off.
Color Temp.
10000K
-- The displayed image may differ depending on the model.
Image Lock
Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and
shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine
again.
Image Lock
2200
55
▶
Coarse
Fine
Position
•• Coarse
Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the
Center using the horizontal control menu.
•• Fine
Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the
frequency (clock speed).
•• Position
Adjusts the screen location horizontally and vertically.
Move
Enter
Return
-- The displayed image may differ depending on the model.
-- Available in PC mode only.
63
Auto Adjustment
i
The values of Fine, Coarse, Position are adjusted automatically.
By changing the resolution in the control panel, the auto function is performed.
Auto Adjustment
Please wait.
-- The displayed image may differ depending on the model.
-- Available in PC mode only.
Signal Balance
Signal Balance
Selects either On or Off with the signal balance.
Signal Control
Signal Balance
Signal Balance
Signal Control
Move
: 사용자
조정
Off
On
Enter
――Available when Signal Control is set to On.
•• R-Gain / G-Gain / B-Gain / R-Offset / G-Offset / B-Offset
Return
-- The displayed image may differ depending on the model.
64
Size
The Size can be switched.
•• 16:9 / 4:3 / Original Ratio
Picture
▶
More
Signal Balance
Size
HDMI Black Level
PIP Picture
Dynamic Contrast
Lamp Control
Brightness Sensor
Picture Reset
Move
: 16:9
4:3
: 일반
Original Ratio
: Off
: 100
Enter
Return
-- The displayed image may differ depending on the model.
HDMI Black Level
When a DVD or set-top box is connected to your product via HDMI or DVI port, it may cause a degradation in the screen
quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected.
In this case, adjust the screen quality of your product by configuring the HDMI Black Level.
•• Normal / Low
Picture
▶
More
Signal Balance
Size
HDMI Black Level
PIP Picture
Dynamic Contrast
Lamp Control
Brightness Sensor
Picture Reset
Move
: 16:9
: Normal
Low
: Off
: 100
Enter
Return
-- The displayed image may differ depending on the model.
65
PIP Picture
Adjusts the PIP Screen Settings.
――Available Modes: PIP On
•• Contrast
Adjusts the Contrast of the PIP window on the screen.
PIP Picture
Contrast
Brightness
Sharpness
Color
Tint
100
45
76
60
R 50
G 50
•• Brightness
Adjusts the Brightness of the PIP window on the screen.
•• Sharpness
Adjusts the Sharpness of the PIP window on the screen.
•• Color
Adjusts the Color of the PIP window on the screen.
Move
Enter
Return
-- The displayed image may differ depending on the model.
Dynamic Contrast
•• Tint
Adds a natural tone to the PIP window.
――PIP input only operates in AV, HDMI1, or HDMI2 mode.
Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast.
•• Off / On
――This function is disabled when PIP or Energy Saving is On.
Picture
▶
More
Signal Balance
Size
HDMI Black Level
PIP Picture
Dynamic Contrast
Lamp Control
Brightness Sensor
Picture Reset
――PIP input only operates in AV, HDMI1, or HDMI2 mode.
Move
: 16:9
: Normal
: 해제
Off
: 100
On
Enter
Return
-- The displayed image may differ depending on the model.
66
Lamp Control
Adjusts the inverter lamp in order to reduce energy consumption.
――Not available when Dynamic Contrast is set to On.
Lamp Control
100
-- The displayed image may differ depending on the model.
Brightness Sensor
Brightness Sensor detects the ambient light intensity so that the picture brightness can automatically be adjusted.
•• Off / On
Brightness Sensor
Off
Move
On
Enter
Return
-- The displayed image may differ depending on the model.
67
Picture Reset
i
Reset the screen settings.
Reset picture settings?
Yes
No
-- The displayed image may differ depending on the model.
68
Chapter 06
Picture
AV / HDMI / TV / Component Mode
Mode
MENU m :Picture
T
Mode
ENTER
The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the
factory.
Picture
•• Dynamic
Dynamic
: 16:9
Standard
Movie
: 16:9
Custom
•• Standard
•• Movie
•• Custom
――Not available when Dynamic Contrast is set to On.
: 16:9
: On
: Normal
▶
Mode
Custom
Color Tone
Color Temp.
Size
Digital NR
HDMI Black Level
More
Move
Enter
Return
-- The displayed image may differ depending on the model.
69
Custom
By using the on-screen menus, the contrast and brightness can be changed to your personal preference.
――Not available when Dynamic Contrast is set to On.
Contrast
Custom
50
50
50
50
R 50
Contrast
Brightness
Sharpness
Color
Tint
G 50
Adjusts the Contrast.
Brightness
Adjusts the Brightness.
Sharpness
Move
Enter
Return
-- The displayed image may differ depending on the model.
Adjusts the picture Sharpness.
Color
Adjusts the picture Color.
Tint
Adds a natural tone to the display.
――The Tint slider is only displayed when input source is AV, Component, HDMI1 or HDMI2.
70
Color Tone
The Color tones can be changed. The individual Color components are also user adjustable.
――Not available when Dynamic Contrast is set to On.
•• Off / Cool2 / Cool1 / Normal / Warm1 / Warm2
――If you set the Color Tone to Cool2, Cool1, Normal, Warm1, or Warm2, the Color Temp. function is disabled.
――Changing a setting in the Color Tone menu will switch the screen mode to Custom.
Picture
Mode
Custom
Color Tone
Color Temp.
Size
Digital NR
HDMI Black Level
▶
More
Move
: Custom
: 16:9
Off
Cool2
Cool1
: 16:9
Normal
: 동작
: 일반
Warm1
Warm2
Enter
Return
-- The displayed image may differ depending on the model.
Color Temp.
Color Temp.
Color Temp. is a measure of the 'warmth' of the image Colors.
――This function is enabled when Mode is set to Custom, and Dynamic Contrast and Color Tone are Off.
10000K
-- The displayed image may differ depending on the model.
71
Size
The Size can be switched.
•• 16:9
Sets the picture to 16:9 wide mode.
Size
•• Zoom1
Magnifies the size of the picture on the screen.
16:9
Zoom1
Zoom2
4:3
Screen Fit
Custom
Move
Enter
Return
-- The displayed image may differ depending on the model.
Digital NR
•• Zoom2
Magnifies the size of the picture more than Zoom1.
▶
▶
•• 4:3
Sets the picture to 4:3 normal mode.
•• Screen Fit
Displays the input scenes as they are without any cutoff when HDMI 720p, 1080i, 1080p signals are input.
•• Custom
Changes the resolution to suit the user's preferences.
The Digital Noise Reduction feature allows you to enjoy clearer and crisper images.
•• Off / On
――Digital NR function is not available for all resolutions.
Picture
: Custom
: Normal
: 16:9
: Off
: On
▶
Mode
Custom
Color Tone
Color Temp.
Size
Digital NR
HDMI Black Level
More
▶
▶
Move
Enter
Return
-- The displayed image may differ depending on the model.
72
HDMI Black Level
When a DVD or set-top box is connected to your product via HDMI or DVI port, it may cause a degradation in the screen
quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected.
In this case, adjust the screen quality of your product by configuring the HDMI Black Level.
•• Normal / Low
――For Timing which can be used for both the PC and the DTV in HDMI and DTV mode, HDMI Black Level will be activated.
Picture
▶
Mode
Custom
Color Tone
Color Temp.
Size
Digital NR
HDMI Black Level
More
Move
: Custom
: Normal
: 16:9
: On
: Normal
Low
Enter
Return
-- The displayed image may differ depending on the model.
Film Mode
Film Mode calibrates unnatural picture when watching a movie (24 frames) played on a TV (30 frames).
Moving subtitles may appear corrupted when this mode is enabled.
――In HDMI mode, this function is available when the input signal is interlaced scan; it is not available in progressive scan.
Picture
More
Film Mode
PIP Picture
Dynamic Contrast
Lamp Control
Brightness Sensor
Picture Reset
Move
•• Off / On
:해제
Off
On
:Off
:100
Enter
Return
-- The displayed image may differ depending on the model.
73
PIP Picture
Adjusts the PIP Screen Settings.
•• Contrast
Adjusts the Contrast of the PIP window on the screen.
PIP Picture
50
50
50
Contrast
Brightness
Sharpness
Move
Enter
•• Brightness
Adjusts the Brightness of the PIP window on the screen.
•• Sharpness
Adjusts the Sharpness of the PIP window on the screen.
Return
-- The displayed image may differ depending on the model.
Dynamic Contrast
Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast.
•• Off / On
――This function is disabled when PIP or Energy Saving is On.
Picture
More
Film Mode
PIP Picture
Dynamic Contrast
Lamp Control
Brightness Sensor
Picture Reset
Move
:Off
: Off
:100
On
Enter
Return
-- The displayed image may differ depending on the model.
74
Lamp Control
Adjusts the inverter lamp in order to reduce energy consumption.
――Not available when Dynamic Contrast is set to On.
Lamp Control
100
-- The displayed image may differ depending on the model.
Brightness Sensor
Brightness Sensor detects the ambient light intensity so that the picture brightness can automatically be adjusted.
•• Off / On
Brightness Sensor
Off
Move
On
Enter
Return
-- The displayed image may differ depending on the model.
75
Picture Reset
i
Reset the screen settings.
Reset picture settings?
Yes
No
-- The displayed image may differ depending on the model.
76
Chapter 07
Sound
Mode
MENU m :Sound
T
Mode
ENTER
The LCD Display has a built-in high fidelity stereo amplifier.
•• Standard
Selects Standard for the standard factory settings.
Sound
Mode
Custom
Auto Volume
SRS TS XT
Sound Select
Speaker Select
Sound Reset
Move
Standard
: 사용자
조정
Music
Movie
: 표준
: Speech
Custom
: 주화면
: Internal
•• Music
Selects Music when watching music videos or concerts.
•• Movie
Selects Movie when viewing movies.
•• Speech
Selects Speech when watching a show that is mostly dialog (i.e., news).
Enter
Return
•• Custom
Selects Custom if you want to adjust the settings according to your personal preferences.
-- The displayed image may differ depending on the model.
77
Custom
The sound settings can be adjusted to suit your personal preferences.
――You can hear the sound even when sound value is set to 0.
――If you adjust sound using Custom function, Mode will turn to Custom mode.
Custom
Bass
Treble
Balance
50
50
R 50
L 50
Bass
Emphasizes low frequency audio.
Treble
Emphasizes high frequency audio.
Move
Enter
Return
Balance
Allows you to Adjusts the sound balance between the left and right speakers.
-- The displayed image may differ depending on the model.
Auto Volume
Reduces the difference in volume control between broadcasters.
•• Off / On
Sound
Mode
Custom
Auto Volume
SRS TS XT
Sound Select
Speaker Select
Sound Reset
Move
: Custom
Off
: 표준
: On
: Main
: Internal
Enter
Return
-- The displayed image may differ depending on the model.
78
SRS TS XT
SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers.
TruSurround XT delivers a compelling, virtual surround sound experience through any two-speaker playback system, including
internal television speakers. It is fully compatible with all multichannel formats.
•• Off / On
Sound
Mode
Custom
Auto Volume
SRS TS XT
Sound Select
Speaker Select
Sound Reset
Move
:Custom
:Off
: Off
On
:Internal
Enter
Return
-- The displayed image may differ depending on the model.
Sound Select
Enable the sound of either the primary or secondary display in PIP mode.
――Available when PIP is set to On.
•• Main / Sub
Sound
Mode
Custom
Auto Volume
SRS TS XT
Sound Select
Speaker Select
Sound Reset
Move
: Custom
: Off
: Off
:면
Main
Sub
Enter
Return
-- The displayed image may differ depending on the model.
79
Speaker Select
When you use the product with it connecting to a Home Theater, turn the internal speakers off so you can listen to sound from
the Home Theater's (external) speakers.
•• Internal
Sound is outputted both from the Internal speaker and the External speakers, but the volume control is only available
from the Internal speaker.
Sound
Mode
Custom
Auto Volume
SRS TS XT
Sound Select
Speaker Select
Sound Reset
Move
: Custom
•• External
When sound is only outputted from the External speakers, the volume control is also only available from the External
speakers.
: Off
: On
: Main
: 내부
Internal
External
Enter
Return
-- The displayed image may differ depending on the model.
Sound Reset
i
Yes
Reset the sound settings.
Reset sound settings?
No
-- The displayed image may differ depending on the model.
80
Chapter 08
Setup
Language
MENU m :
Setup
T
Language
ENTER
You can choose one of 14 languages.
――The language chosen affects only the language of the OSD. It has no effect on any software running on the computer.
Setup
Language
Time
Menu Transparency
Safety Lock
Energy Saving
Video Wall
Safety Screen
▶
More
Move
English
: 한국어
Deutsch
Español
: 투명하게
Français
Italiano
: 해제
Svenska
Русский
Português
Enter
English, Deutsch, Español, Français, Italiano, Svenska, Русский
Português ,Türkçe, Polish, 简体中文, 繁體中文 ,日本語, 한국어
Return
-- The displayed image may differ depending on the model.
81
Time
Selects from one of 4 time settings, Clock Set, Sleep Timer, Timer, and Holiday Management.
Clock Set
Clock Set
Sleep Timer
Timer1
Timer2
Timer3
Holiday Management
Time
Current Time Setting.
10:04 am ▶
: Off ▶
: Off ▶
: Off ▶
: Off ▶
Sleep Timer
▶
Turns the LCD Display off automatically at certain times.
•• Off / 30 / 60 / 90 / 120 / 150 / 180
Timer1 / Timer2 / Timer3
Move
Enter
Return
-- The displayed image may differ depending on the model.
You can set the LCD display to automatically turn on or off at a specified time.
――Only enabled when the clock is set using the Clock Set menu.
――The Manual option allows you to select a day of the week.
――Holiday : When choose Apply, timer is not available on holiday; when choose Don't Apply, timer is available on holiday.
Holiday Management
•• Add
You can register holidays.
•• Delete Selected
You can delete selected holidays.
――Only enabled when registered holidays are selected.
――More than one holiday can be selected and deleted.
•• Delete All
You can delete all the registered holidays.
82
Menu Transparency
Change the transparency of the background of the OSD.
•• High / Medium / Low / Opaque
Setup
Language
Time
Menu Transparency
Safety Lock
Energy Saving
Video Wall
Safety Screen
: English
High
: 투명하게
Medium
Low
: 해제
Opaque
▶
More
Move
Enter
Return
-- The displayed image may differ depending on the model.
Safety Lock
Change PIN
The password can be changed.
Safety Lock
Change PIN
Lock
▶
▶
The preset password for the LCD Display is "0000".
――If you forgot your password, press the remote buttons INFO
EXIT
MUTE to reset the password to "0000."
Lock
This is the function that locks the OSD in order to keep the current settings or to prevent others from adjusting the settings.
Move
Enter
Return
-- The displayed image may differ depending on the model.
83
Energy Saving
This feature adjusts the power consumption of the unit in order to save energy.
•• Off / On
Setup
Language
Time
Menu Transparency
Safety Lock
Energy Saving
Video Wall
Safety Screen
: English
: High
: 해제
Off
On
▶
More
Move
Enter
Return
-- The displayed image may differ depending on the model.
Video Wall
A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the
same picture is repeated on each screen.
Video Wall
When the Video Wall is on, you can adjust the Video Wall screen setting.
――When Video Wall is running, the Size functions are not available.
――Disabled when PIP is set to On.
Video Wall
Video Wall : On ▶
: Full ▶
Format
Horizontal : 1 ▶
▶
Vertical : 1
▶
Screen Position
Move
Enter
Turns Off/On the Video Wall function of the selected display Off/On.
•• Off / On
Return
-- The displayed image may differ depending on the model.
84
Format
The Format can be selected to see a divided screen.
•• Full
Provides a full screen without any margins.
Video Wall
Video Wall : On
: Full Format
Horizontal : 1
Vertical : 1 Screen Position
Move
Enter
▶
▶
▶
▶
▶
•• Natural
Displays a natural image with the original aspect ratio intact.
Return
-- The displayed image may differ depending on the model.
Horizontal
Sets how many parts the screen should be divided horizontally.
Fifteen adjustment levels: 1~15.
――If Vertical is set to 15, the maximum value for Horizontal is 6.
Video Wall
Video Wall : On : Full Format
Horizontal : 1 Vertical : 1 Screen Position
Move
Enter
▶
▶
▶
▶
▶
Return
-- The displayed image may differ depending on the model.
85
Vertical
Sets how many parts the screen should be divided vertically.
Fifteen adjustment levels: 1~15.
――If Horizontal is set to 15, the maximum value for Vertical is 6.
Video Wall
Video Wall : On ▶
: Full ▶
Format
Horizontal : 1 ▶
▶
Vertical : 1 ▶
Screen Position
Move
Enter
Return
-- The displayed image may differ depending on the model.
Screen Position
The screen can be divided into several images. A number of screens can be selected with a different layout when dividing.
•• Select a mode in Screen Position.
Screen Position
•• Select a display in Display Selection.
•• The selection will be set up by pressing a number in the selected mode.
•• The screen can be split into a maximum of 100 sub-screens.
――When more than four displays are connected, we recommend a resolution of XGA (1024*768) or greater to prevent any
picture degradation.
Enter
Return
-- The displayed image may differ depending on the model.
86
Safety Screen
Pixel Shift
To prevent after-images on the screen, you can use this function to have pixels move on the LCD in the horizontal or vertical
direction.
Pixel Shift
•• Off / On
Pixel Shift
Pixel Shift : On : 4 Horizontal
Vertical : 4 : 4 min Time ▶
▶
▶
▶
Horizontal
Sets how many pixels the screen moves horizontally.
Five adjustment levels: 0, 1, 2, 3, and 4.
Vertical
Move
Enter
Return
-- The displayed image may differ depending on the model.
Sets how many pixels the screen moves vertically.
Five adjustment levels: 0, 1, 2, 3, and 4.
Time
Set the time interval for performing the horizontal or vertical movement, respectively.
87
Timer
Timer
You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be
performed for the set period of time and then automatically finish.
Timer
Timer : On ▶
: Bar
▶
Mode
▶
Period : 4 Hour
▶
: 4 sec
Time •• Off / On
Mode
You can change the Safety Screen Type.
•• Bar / Eraser / Pixel
Move
Enter
Return
-- The displayed image may differ depending on the model.
Period
Use this function to set the execution period for each mode set in the Timer.
Time
Within the set Period of time specify a time for execution.
Bar
This function prevents after-images on the screen by moving long black and white vertical lines.
-- The displayed image may differ depending on the model.
88
Eraser
This function prevents after-images on the screen by moving a rectangular pattern.
-- The displayed image may differ depending on the model.
Pixel
This function prevents after-images by moving many pixels on the screen.
-- The displayed image may differ depending on the model.
89
Side Gray
Select the brightness of the grey for the screen background.
•• Off / Light / Dark
Safety Screen
Pixel Shift
Timer
Bar
Eraser
Pixel
Side Gray
Move
: Off
Light
Dark
Enter
Return
-- The displayed image may differ depending on the model.
Resolution Select
When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024
x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz or 1366 x 768 @ 60Hz, by using this function(Resolution Select), you
can have the picture displayed on the screen in the specified resolution.
――Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x
Setup
768 @ 60Hz or 1366 x 768 @ 60Hz.
▶
More
Resolution Select
Power On Adjustment
OSD Rotation
Advanced Settings
Setup Reset
Reset All
•• Off / 1024 X 768 / 1280 X 768 / 1360 X 768 / 1366 X 768
: 가로
Off
1024 X 768
1280 :X가로
768
1360 X 768
1366 X 768
S/N : -----------------Move
Enter
Return
-- The displayed image may differ depending on the model.
-- Available in PC mode only.
90
Power On Adjustment
Adjusts the Power On time for the screen.
――Set the Power On time to be longer to avoid overvoltage.
Power On Adjustment
Power On Adjustment :
0
Adjust
Return
-- The displayed image may differ depending on the model.
OSD Rotation
OSD Rotate
•• Landscape / Portrait
Setup
▶
More
Resolution Select
Power On Adjustment
OSD Rotation
Advanced Settings
Setup Reset
Reset All
: Off
: Landscape
Portrait
S/N : -----------------Move
Enter
Return
-- The displayed image may differ depending on the model.
91
Advanced Settings
Temperature
Configures the setting for the Temperature function, which detects the internal temperature for the product's protection.
Advanced Settings
Temperature
Auto Power
Button Lock
User Auto Color
Standby Control
Lamp Schedule
OSD Display
Software Upgrade
Move
: Off
: Off
: Auto
Enter
Temperature Control
▶
▶
▶
▶
▶
▶
▶
▶
Return
-- The displayed image may differ depending on the model.
Detects the product's internal temperature and specifies the desired temperature.
The product is set to 77 C by default.
――The picture will be dimmed if the temperature exceeds the specified temperature, and the product will automatically power
off to prevent overheating if the temperature keeps rising.
――It is best to use the product at temperatures 75 - 80 C (based on ambient temperature of 40 C).
Refer to "Specifications" herein for details about operating conditions.
Current Temperature
Shows the current temperature of the product.
Auto Power
Enables or disables Auto Power for the product.
Advanced Settings
Temperature
Auto Power
Button Lock
User Auto Color
Standby Control
Lamp Schedule
OSD Display
Software Upgrade
Move
•• Off / On
――When Auto Power is On, the product will power on automatically as soon as it is connected to power.
: Off
: On
: Auto
Enter
Return
-- The displayed image may differ depending on the model.
92
Button Lock
Locks or unlocks the monitor control buttons on the product.
•• Off / On
Advanced Settings
Temperature
Auto Power
Button Lock
User Auto Color
Standby Control
Lamp Schedule
OSD Display
Software Upgrade
: Off
: Off
On
: Auto
Move
Enter
Return
-- The displayed image may differ depending on the model.
User Auto Color
•• Auto Color
Automatically adjusts the colors.
User Auto Color
Auto Color
•• Reset
Resets the color settings.
Reset
Move
Enter
Return
-- The displayed image may differ depending on the model.
――Enabled only in PC mode.
93
Standby Control
Sets the standby mode, which will be activated when no input signal is detected.
•• Off
A message will read No Signal if no input signal is detected.
Advanced Settings
Temperature
Auto Power
Button Lock
User Auto Color
Standby Control
Lamp Schedule
OSD Display
Software Upgrade
Move
•• On
Power-saving mode will be activated if no input signal is detected.
: Off
: Off
•• Auto
When no input signal is detected,
Off
: 자동설정
On
Auto
Enter
――Power-saving mode will be activated if an external device is connected.
――A message will read No Signal if no external device is connected.
――Enabled only in PC, DVI mode.
Return
――
Auto will be disabled in HDMI mode.
-- The displayed image may differ depending on the model.
Lamp Schedule
Adjusts the luminance to a user-specified value at a specified time.
Lamp Schedule
Lamp Schedule
Hour
: On
▶
Minute am/pm Lamp
Schedule 1
12
00
am
100
Schedule 2
12
00
am
100
Move
Enter
Return
-- The displayed image may differ depending on the model.
94
OSD Display
Displays or hides a menu item on the screen.
Source OSD
OSD Display
Source OSD : On ▶
Not Optimum Mode OSD : On ▶
: On ▶
No Signal OSD : On ▶
MDC OSD •• Off / On
Not Optimum Mode OSD
•• Off / On
No Signal OSD
Move
Enter
Return
-- The displayed image may differ depending on the model.
•• Off / On
MDC OSD
•• Off / On
95
Software Upgrade
Performs a software upgrade.
1
Connect the product to a computer via a digital signal such as DVI or HDMI. Click the BMP image file converted from an
SW code. The image below will appear on the screen of the product.
2
While a BMP image onto which the software code has been converted is displayed on the screen, select Software
Upgrade.
3
If a more recent version than the current software version is detected, you will be asked whether to upgrade the current
software. If you select Yes, the upgrade is performed.
4
-- When there are two or more BMP images, they are displayed on the screen using a
slideshow.
-- It is recommended that the playback interval between two BMP images in the slideshow
should be one second. The image extraction probability will decrease with other playback
intervals.
-- A BMP image might not be extracted if it is covered by another image (for example, the mouse
pointer).
When the software upgrade is completed, the product is turned off and on automatically.
――This only operates with a digital signal, such as in DVI, HDMI1, or HDMI2 mode. (The input resolution must be identical to
the panel resolution.)
――In HDMI1 and HDMI2 modes, the timing values used for both the PC and TV are only supported if the Edit Name is set to
PC or DVI PC.
――This is only supported if the Size is set to 16:9.
Advanced Settings
Temperature
Auto Power
: Off
버튼
잠금 is completed.
: 해제
Upgrade
사용자
색상
Power 자동
will be
off 조정
and turned on automatically.
대기 모드 설정
: 자동설정
OK
휘도 조정 기능
OSD Display
Software Upgrade
Move
Enter
Return
-- The displayed image may differ depending on the model.
96
Setup Reset
i
Reset all the values for a setting.
Reset settings in setup?
Yes
No
-- The displayed image may differ depending on the model.
Reset All
i
Reset all the settings for the display.
All Settings return to default settings.
Yes
No
-- The displayed image may differ depending on the model.
97
Chapter 09
Using MDC
MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC.
Multi Control
•• ID Setup
Assigns distinctive IDs to the SET.
MENU m :Multi
T Control
•• ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds
to the transmitter setting becomes activated.
ENTER
Multi Control
•• MDC Connection
Selects a port to receive the MDC inputs from.
ID Setup
:
00
ID Input
:
--
MDC Connection
:
RJ45 MDC
――RS232C MDC: Communicates with the MDC via a RS232C MDC cable.
――RJ45 MDC: Communicates with the MDC via an RJ45 MDC cable.
•• Network Setting
IP Setting : Manual, Auto
Network Setting
IP Address : Manually enter the IP Address if IP Setting is set to Manual.
Move
Enter
Return
Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.
Gateway : Manually enter the Gateway if IP Setting is set to Manual.
-- The displayed image may differ depending on the model.
98
MDC Program Installation/Uninstallation
Installation
MDC installation can be affected by the
graphics card, mother board and network
conditions.
If a software installation window is not
displayed on the main screen, install with
the MDC Unified execution file in the
MDC folder on the CD.
If the directory path is not specified, the
program will be installed in the default
directory path.
Select "Launch MDC Unified" and
click "Finish" to run the MDC program
immediately.
1
Insert the installation CD into the CD-ROM drive.
2
Click the MDC Unified installation program.
3
Select a language for installation. Next, click "OK".
4
When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click "Next".
5
In the "License Agreement" window displayed, select "I accept the terms in the license agreement" and click "Next".
6
In the displayed "Customer Information" window, fill out all the information fields and click "Next".
7
In the displayed "Destination Folder" window, select the directory path you want to install the program in and click "Next".
8
In the displayed "Ready to Install the Program" window, check the directory path to install the program in and click "Install".
9
Installation progress will be displayed.
10Click "Finish" in the displayed "InstallShield Wizard Complete" window.
11The MDC Unified shortcut icon will be created on the desktop after installation.
-- The MDC execution icon may not be
displayed depending on the PC system
or product specifications.
-- Press F5 if the execution icon is not
displayed.
Uninstallation
1
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
2
Select MDC Unified from the list and click Change/Remove.
99
What is MDC?
Multiple display control "MDC" is an
application that allows you to easily
control multiple display devices
simultaneously using a PC.
Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
Monitor 1
RS232C IN / OUT
Monitor 2
Computer
100
Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable.
Connection using a direct LAN cable
――Multiple products can be connected using the RJ45 MDC port on the product and the LAN ports on the HUB.
Monitor 1
RJ45 MDC
HUB
Monitor 2
Computer
101
Connection using a cross LAN cable
――Multiple products can be connected using the RS232C IN / OUT port on the product.
RS232C IN
Monitor 1
RS232C OUT
RJ45 MDC
RS232C OUT
RS232C IN
Monitor 2
Computer
102
Connection Management
Connection management includes the Connection list and Connection list modification options.
Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MAC, and Connection Type), connection status, Set ID
Range, and detected devices.
Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion. All the LFDs detected in a connection are displayed in the Device list,
where the user can make groups and send commands to detected devices.
Connection list modification options - Connection modification options includes Add, Edit, Delete, and Refresh.
103
User Login
Launching the program displays the user login window.
The initial login ID (Username: admin) and password (password: admin) are set to admin.
――After logging in for the first time, make sure to change the password to ensure security.
――To change the password, go to Home > User Settings.
After you are logged in, [User Login : admin] appears at the right bottom of the program.
To log in automatically when the program restarts, select the Auto Login checkbox in the User Login window.
104
Auto Set ID
Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection.
There can be a maximum of 100 LFDs in a connection.
The Set ID is assigned sequentially in the daisychain running from 1 to 99, and then finally to Set ID 0.
――ID for the last 100th LFD is set to 0.
105
Cloning
Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs.
You can select specific tab categories or all tab categories for cloning, using the copy setting option window.
――To delete the settings you have configured, click the Paste Settings button.
106
Command Retry
This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD.
The retry count value can be set using the MDC options window.
The retry count value must be between 1-10. The default value is 1.
107
Getting Started with MDC
1
To start the program, click Start
Programs
Samsung
MDC Unified.
The login window appears after the MDC program is launched.
Enter the user ID and password.
•• The default user ID and password are admin.
•• Make sure to change the password after the first login.
2
Click Add to add a display device.
SET ID Range: Select a range of the unique ID assigned to a monitor.
-- If the connection is established via RS232C, go to Serial and specify the COM Port.
-- If the connection is established via Ethernet, enter the IP that was entered for the display device.
108
Main Screen Layout
1
6
1 Menu Bar
Change the status of a display device or the properties of the program.
2 Device Category
View a list of connected display devices or device groups.
3 Schedule Category
View a list of schedules for display devices.
4 Set List
Select the display device you want to adjust.
2
5 Modify the Set List
Add, edit, regroup or delete sets.
3
6 Help Topics
Display help topics for the program.
5
4
Menus
You can power on or off a selected device or change the input source or volume of the device.
Home
Select an item and change the corresponding setting.
Choose display devices from the list of sets, and select the Home tab.
Power
•• On: Power on a selected display.
1
•• Off: Power off a selected display.
Input
2
3
•• Input Source : Change the input source.
-- Input sources available can vary depending on the Display Device Models.
-- The input source can be changed only for displays that are turned on.
•• Channel: Change the channel.
-- The TV channel can be changed by using the up/down arrow keys.
-- The channel can be changed only when the input source is TV.
-- Only registered channels can be selected.
-- Only applicable to models that support TVs.
109
――The volume can be changed or the sound can be muted only for displays that are turned on.
Volume
Volume
•• Adjust the volume of a selected display.
2
Alert
3
•• The volume can be adjusted using the slider bar in the range of 0 to 100.
Mute
•• Enable or disable Mute for a selected display.
Mute will automatically be disabled if Volume is adjusted when Mute is on.
Fault Device
•• This menu shows a list of display devices which have following errors - fan error, temperature error, brightness sensor
error, or lamp error.
•• Select a display device from the list. The Repair button will be enabled.
3
•• Click the Refresh button to refresh the error status of the display device. The recovered display device will disappear from
the Fault Device List.
Fault Device Alert
•• Display device in which error is detected will be reported by email.
•• Fill in all required fields. The Test and OK buttons will be enabled.
Ensure the Sender information and at least one Recipient are entered.
110
User Login
User Settings
•• Add, delete or edit login information.
Logout
•• Log out from the current user account as follows.
•• Click Logout. The message "Do you want to log admin out?" is displayed
•• Click Yes. The user login window appears.
•• If you do not want to log in, click Close. The program is closed.
――If you close the program using Logout, the login window will appear prompting you to enter user information even if
the Auto Login checkbox is selected.
Screen Adjustment
The screen settings (contrast, brightness, etc.) can be adjusted.
Custom
Select an item and change the corresponding screen setting.
Choose display devices from the list of sets, and select the Picture tab.
Picture Mode
•• Adjust the picture mode for the selected display device.
Contrast
•• Adjust the contrast for the selected display device.
Brightness
•• Adjust the brightness for the selected display device.
111
Color
Color
•• Adjust the colors for the selected display device.
Tint (G/R)
•• Adjust the tint for the selected display device.
Color Tone
•• Adjust the background color tone for the selected display device.
Color Temp.
-- Color and Tint (G/R) are not available if the input source is PC.
-- Color, Tint (G/R), Color Tone and Color Temp. are not available if both PC Source and Video
Source are selected.
Options
•• Adjust the color temperature for the selected display device.
――This option is enabled if Color Tone is set to Off.
HDMI Black Level
•• Adjust the HDMI Black Level for the selected display device.
Auto Motion Plus
This option is used to view dynamic images.
•• Off: Disable the Auto Motion Plus function.
•• Clear: Set the level of Auto Motion Plus to clear. This mode is suitable to display vivid images.
•• Standard: Set the level of Auto Motion Plus to standard.
•• Smooth: Set the level of Auto Motion Plus to smooth. This mode is suitable to display smooth images.
•• Custom: Customize the level of screen burn-in or flickering.
•• Demo: This function demonstrates the technology of Auto Motion Plus. The result when the mode is changed can be
previewed on the left side of the window.
――Auto Motion Plus may not be available depending on the product.
•• Detail: View detailed information about the selected display device.
Brightness Sensor
•• Enable or disable the Brightness Sensor for the selected display device.
•• The Brightness Sensor detects the ambient light intensity and automatically adjusts the screen brightness.
――Brightness Sensor may not be available depending on the product.
112
MPEG Noise Filter
Reduces MPEG noise to provide improved picture quality.
•• Off / Low / Medium / High / Auto
Smart LED
Controls the LED backlight to maximize picture clarity.
Cinema Black
In Movie mode, this feature dims the top and bottom areas of the video image to provide a more immersive viewing
experience.
•• Off: Turns off the Cinema Black feature.
•• On: Adjusts the dimming of the top and bottom areas of the screen according to the video.
Size
Picture Size
•• Adjust the screen size for the selected display device.
•• The Detail item will be disabled if Picture Size is set to a mode that does not support detailed configuration.
•• The -/+ buttons can be used to adjust Zoom.
•• The screen can be relocated using the up/down/left/right buttons.
Detail
•• You can view details of the selected screen size.
PC Screen Adjustment
•• Frequency adjustment or fine-tuning is available by using the -/+ buttons in Coarse or Fine.
•• To relocate the screen, click one of the four images below Position.
•• To automatically adjust the frequency, fine-tune or relocate the screen, click Auto Adjustment.
113
Advanced features
3D Mode
Select the 3D input format.
3D L/R Change
Swap the left and right pictures.
3D
2D
Displays the image for the left eye only.
3D Auto View
3D Control
If you set 3D Auto View to Message Notice, a pop up message window appears when the product receives a 3D signal.
3D Optimization
The overall adjustment of 3D effect.
3D Expert Pattern
View a 3D pattern.
3D Effect
Adjust 3D effects like perspective and depth for your preferred 3D viewing experience.
•• Auto: Automatically adjust the perspective and depth settings in accordance with the 3D input source.
•• Manual: Manually adjust the perspective and depth settings.
114
Advanced Settings
Dynamic Contrast
Adjust the screen contrast.
Gamma Control
Adjust the primary color intensity.
RGB Only Mode
Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation.
Flesh Tone
Emphasize pink “Flesh Tone.”
Motion Lighting
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
LED Motion Plus
Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture.
Color Space
Adjusts the range and variety of color (the color space) available to create images.
•• Auto / Native / Custom
-- To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom.
White Balance
Adjust the colour temperature for a more natural picture.
•• R-Offset / G-Offset / B-Offset
Adjust each color (red, green, blue) darkness.
•• R-Gain / G-Gain / B-Gain
Adjust each color (red, green, blue) brightness.
•• Reset
Resets the White Balance to it’s default settings.
115
Sound Adjustment
You can change the sound settings.
Choose display devices from the list of sets, and select the Sound tab.
Bass
•• Adjust the bass for the selected display.
Treble
•• Adjust the treble for the selected display.
-- The Bass or Treble item will be disabled if the item is not supported by the selected set.
Balance(L/R)
•• Adjust the volume of the left and right speakers of the selected display device.
SRS TS XT
•• Enable or disable the SRS TS XT effect for the selected display device.
System Setup
Video Wall
Choose display devices from the list of sets, and select the System tab.
The Video Wall function can be used to display part of a whole picture or repeat the same picture on each of connected
multiple display devices.
――Video Wall is enabled only when devices are in the group.
Video Wall
•• Enable or disable Video Wall.
116
Format
H
•• Select the format to display the split screen.
•• Select the number of horizontal display devices.
•• A maximum of 15 displays can be arranged in a row.
――A maximum of 6 can be assigned to V if 15 is assigned to H.
V
•• Select the number of vertical display devices.
•• A maximum of 15 displays can be arranged in a row.
――A maximum of 6 can be assigned to H if 15 is assigned to V.
Screen Position
•• View the layout of displays (configured by the screen divider) or change the layout as required.
•• Screen Position and Preview are enabled when Video Wall is set to on.
•• Note that if multiple sets are selected, Preview is enabled only if the settings for H and V match the layout of the selected
sets.
Full
Natural
•• To change the Position, select a set and drag it to a new position.
――The range of screen divider settings may differ depending on the model.
PIP
PIP Size
•• View the PIP Size of the current display.
PIP Source
•• Select a PIP input source.
Sound Select
•• Select and enable the sound from either the primary screen or secondary screen.
Channel
-- Basic information required to adjust PIP will appear in the menu screen.
•• The channel can be changed if PIP Source is TV.
-- PIP will be disabled when Video Wall is On.
-- Note that Picture Size is disabled when PIP is On.
117
General
User Auto Color
•• Automatically adjust the screen colors.
――Available only in PC mode.
Auto Power
•• Set the product to automatically power on.
Standby Control
•• Set the standby mode to activate if an input source is not detected.
Fan & Temperature
Configure the settings required to detect the fan speed and internal temperature for the product's protection.
Fan Control
•• Select a method to configure the fan speed.
Fan Speed Setting
•• Configure the fan speed.
Temperature
•• Detect the internal temperature by specifying the range of temperature.
118
Security
Safety Lock
•• Lock the on-screen menus.
――To unlock the menus, set Safety Lock to Off.
Button Lock
•• Lock the buttons on the display device.
――To unlock the buttons, set Button Lock to Off.
OSD Display
Source OSD
•• Select whether to display a message when the Source is changed.
Not Optimum Mode OSD
•• Select whether to display a message when a non-compatible mode is selected.
No Signal OSD
•• Select whether to display a message when there is no input signal.
MDC OSD
•• Select whether to display a message when settings are changed by the MDC.
119
Time
Clock Set
Change the current time on the selected display device according to the time set on a PC.
If the time is not set on the display device, null values will be displayed.
Timer
On Timer
•• Repeat: Specify the period for which you want to repeat the selected Timer.
Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual
•• Holiday Apply: The Holiday Management settings can be applied to the Timer.
•• On Time: Set the time to power on the selected display device.
•• Volume: Specify the volume of the display device when it is powered on by On Time.
•• Source: Specify the input source of the display device when it is powered on by On Time.
Off Timer
•• Repeat: Specify the period for which you want to repeat the selected Timer.
Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual
•• Holiday Apply: The Holiday Management settings can be applied to the Timer.
•• Off Time: Set the time to power off the selected display device.
――The checkboxes to select days of the week below Repeat are enabled only if Manual is selected.
120
Holiday Management
Holiday Management allows you to prevent devices that are set to be powered on by the Timer from turning on at a
specified date.
――The Holiday Management function can be enabled or disabled in the Timer settings menu.
•• Add: You can specify holidays.
Click the Add button in the Holiday Management window.
•• Delete: Delete holidays. check the corresponding checkboxes and click this button.
•• List of holidays: View a list of holidays you have added.
Screen Burn Protection
Pixel Shift
Move the screen slightly at specified time intervals to prevent screen burn-in.
121
Screen Saver
This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time.
Timer: You can set the timer for Screen Saver.
•• Off
•• Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals (Period).
•• Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to
End Time).
•• Mode: Select a screen protective pattern to display.
•• Period (Hour): Specify the time interval to activate the Screen Saver function.
――The option is enabled when Repeat is selected for Timer.
•• Time (Sec): Specify the duration to keep the Screen Saver function on.
――The option is enabled when Repeat is selected for Timer.
•• Start Time: Set start time to display screen saver.
――The option is enabled when Interval is selected for Timer.
•• End Time: Set end time to display screen saver.
――The option is enabled when Interval is selected for Timer.
――Period (Hour) and Time (Sec) can be configured when Repeat is
selected.
――Start Time and End Time can be configured when Interval is selected.
122
Safety Screen
The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display
device for an extended period of time.
Lamp Control
Lamp Control is used to adjust the backlight to reduce power consumption.
Automatically adjust the backlight of the selected display device at a specified time.
If Manual Lamp Control is adjusted, Auto Lamp Control will automatically switch to Off.
Manually adjust the backlight for the selected display.
If Auto Lamp Control is adjusted, Manual Lamp Control will automatically switch to Off.
•• Ambient Light: Ambient Light detects ambient light intensity and automatically adjusts the screen brightness of all the
LFDs in the same serial chain.
123
Ticker
Input text while a video or image is displayed and display the text on the screen.
Ticker
Enable or disable Ticker.
•• Off / On
Message
Enter a message to display on the screen.
Timer
Set the Start Time and End Time to display a message (Message).
Position
Select an orientation to display a message (Message) from Horizontal and Vertical.
Motion
Specify the Direction and Speed to display a message (Message).
Font Options
Specify the message Size, Foreground Color, Foreground Opacity, Background Color and Background Opacity.
124
Tool Settings
•• Panel Control: Turn on or off the screen of a display device.
•• Remote Control: Enable or disable the remote control.
Security
Reset
•• Reset Picture: Reset the screen settings.
•• Reset Sound: Reset the sound settings.
•• Reset System: Reset the system settings.
•• Reset All: Reset the screen, sound and system settings at the same time.
125
Edit Column
Options
Configure the settings for the items that will be displayed on the list of displays.
•• Language: Select a language to use in the MDC program. After selecting a language, restart the MDC program to use the
selected language.
•• Command Retry Count: Specify the number of retry attempts when a command fails.
•• Error Status Interval: Specify the time interval to query the display device in order to check if "Fault Device" has
occurred.
•• Mail Alert Interval: Specify the time interval for email notifications in the event when "Fault Device" occurs.
Edit Column
Select the items you want to display in the list of sets.
126
Monitor Window
A window appears showing details for data transfer between the computer and display devices.
•• Filter
Information
View the program information.
127
Other Functions
Resizing a Window
Place the mouse pointer on a corner of the program window. An arrow will appear.
Move the arrow to customize the size of the program window.
128
Group Management
Create groups and manage the list of sets on a group basis.
――Duplicate group names cannot be used.
Creating Groups
1
Right-click and select Group
2
In the Edit Group window displayed, click Add on the same level or Add on the sub level.
Edit in the display device list section on the left side of the program window.
•• Add on the same level: Create a group on the same level as the selected group.
-- The Add on the same level button is enabled only if at least one group is created.
129
•• Add on the sub level: Create a sub-group under the selected group.
Deleting Groups
3
Enter the group name.
1
Select a group name, and click Edit.
2
In the Edit Group window displayed, click Delete.
3
Click Yes. The group will be deleted.
130
Renaming Groups
1
Select a group name, and click Edit.
2
In the Edit Group window displayed, click Rename.
3
If a cursor appears in the old group name, enter a new group name.
Rename
Schedule Management
Creating Schedules
Create and register a schedule on a group basis.
1
Click All Schedule List in the schedule section on the left side of the program window. The Add button will be enabled
in the middle.
131
2
Click the Add button. The Add Schedule window will appear.
3
Click Add below the Device Group item, and select the group you want to add a schedule to.
4
Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list
window.
-- Device Group: Select a group.
-- Date&Time
Instant Execution: Run the schedule immediately.
Timer: Set the date, time and interval to run the schedule.
-- Action: Select a function that will activate at the specified time and interval.
Schedule Modification
To modify a schedule, select the schedule and click Edit.
Deleting a Schedule
To delete a schedule, select the schedule and click Delete.
132
Troubleshooting Guide
-- This program may malfunction
sometimes due to a communication
problem between the PC and display
or electromagnetic waves emitted from
nearby electronic devices.
Issue
The display you want to control does not
appear on the system information chart.
Solution
1
Check the connection of the RS232C cable (check that the cable is properly connected to appropriate serial port).
2
Check that another display with a duplicate ID is not connected. Connecting displays with a duplicate ID can cause
the displays not to be shown due to data collision.
3
Check that the display ID is within the range of 0 and 99. (Change the ID using the Display menu.)
――For a display that supports the ID in a range of 0 to 99, the ID should be set between 0 and 99.
The display you want to control does not
appear on the other Control Info Grids.
Check that the display is powered on. (See the power status in the system information chart.)
The following message appears
repeatedly.
Check that the display you want to control is selected.
Displays power on or off at different
time from one another even though On
Time or Off Time is set.
Adjust the time on the PC to synchronize the time between the connected displays.
The remote control does not work.
The remote control may not work if the RS-232C cable is removed or the program is closed abnormally while the Remote
Control function is Disable. To resolve this, run the program again and set Remote Control to Enable.
Ensure you select the input source the display is connected to.
133
How display properties are shown when multiple displays are used
1
When no display is selected: The default value is displayed.
2
When one display is selected: Settings for the selected display are displayed.
3
When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3.
4
When the All+Select checkbox is checked and all displays are selected: The default settings are displayed.
134
Chapter 10
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Center
Before calling Samsung Customer Service
Center, test your product as follows. If
the problem persists, contact Samsung
Customer Service Center.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
1
Power off both the PC and product.
2
Disconnect all the cables from the product.
3
Power on the product.
4
If No Signal is displayed, the product is operating normally.
Checking the Resolution and Frequency
Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected
If the screen remains blank, check the PC
system, video controller and cable.
(refer to Supported Resolutions).
135
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connection is secure.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product and
PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem, adjust the
screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update the
graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to adjust
the screen settings.)
Screen issue
The power LED is off. The screen will not switch on.
Make sure that the power cord is connected.
No Signal is displayed on the screen (refer to "Connecting to
a PC").
Check that the product is connected correctly with a cable
Not Optimum Mode is displayed.
This message is displayed when a signal from the graphics card exceeds the product's maximum
resolution and frequency.
Check that the device connected to the product is powered on.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to
the product specifications.
The screen is not clear. The screen is blurry.
Check the cable connection to the product.
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
136
Screen issue
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
Check that the resolution and frequency of the PC and graphics card are set within a range compatible
with the product. Then, change the screen settings if required by referring to the Additional
Information on the product menu and the Standard Signal Mode Table.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
Screen color is inconsistent.
Go to Picture and adjust the Color Control settings.
White does not really look white.
Go to Picture and adjust the Color Control settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
Press any key on the keyboard or move the mouse to return to the previous screen.
Sound issue
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound
card or software program.
137
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
138
Q&A
Question
How can I change the frequency?
Answer
Set the frequency on your graphics card.
•• Windows XP: Go to Control Panel Appearance and Themes Display
Advanced Monitor and adjust the frequency in Monitor Settings.
•• Windows ME/2000: Go to Control Panel Display
adjust the frequency in Monitor Settings.
Refer to the user manual for your PC or
graphics card for further instructions on
adjustment.
Settings
Settings
Advanced
Monitor and
•• Windows Vista: Go to Control Panel Appearance and Personalization Personalize
Display Settings Advanced Settings Monitor and adjust the frequency in Monitor
Settings.
•• Windows 7: Go to Control Panel Appearance and Personalization Display Adjust
resolution Advanced Settings Monitor and adjust the frequency in Monitor Settings.
•• Windows 8: Go to Settings Control Panel
Adjust resolution Advanced Settings
Settings.
How can I change the resolution?
•• Windows XP: Go to Control Panel
adjust the resolution.
Appearance and Personalization Display
Monitor and adjust the frequency in Monitor
Appearance and Themes
•• Windows ME/2000: Go to Control Panel
Display
Display
Settings and
Settings and adjust the resolution.
•• Windows Vista: Go to Control Panel Appearance and Personalization
Display Settings and adjust the resolution.
•• Windows 7: Go to Control Panel Appearance and Personalization
Resolution and adjust the resolution.
Personalize
Display
•• Windows 8: Go to Settings Control Panel Appearance and Personalization
Adjust Resolution and adjust the resolution.
Adjust
Display
139
Question
How do I set powersaving mode?
Answer
•• Windows XP: Set power-saving mode in Control Panel
Screen Saver Settings or BIOS SETUP on the PC.
Appearance and Themes
•• Windows ME/2000: Set power-saving mode in Control Panel
Settings or BIOS SETUP on the PC.
Display
Display
Screen Saver
•• Windows Vista: Set power-saving mode in Control Panel Appearance and Personalization
Personalize Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 7: Set power-saving mode in Control Panel Appearance and Personalization
Personalize Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 8: Set power-saving mode in Settings Control Panel Appearance and
Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC.
140
Chapter 11
Specifications
1
General
Size
Model Name
LE32C
LE46C
LE55C
Size
32 Class (32 inches / 80.5 cm)
46 Class (45.9 inches / 116 cm)
55 Class (54.6 inches / 138 cm)
Display area
698.4 mm (H) x 392.85 mm (V)
1018.08 mm (H) x 572.67 mm (V)
1209.6 mm (H) x 680.4 mm (V)
27.5 inches (H) x 15.5 inches (V)
40.1 inches (H) x 22.5 inches (V)
47.6 inches (H) x 26.8 inches (V)
744.0 X 452.7 X 65.9 mm
1061.0 X 619.8 X 51.7 mm
1252.4 X 727.7 X 51.7 mm
29.3 X 17.8 X 2.6 inches
41.8 X 24.4 X 2.0 inches
49.3 X 28.6 X 2.0 inches
Weight (without stand)
9.1 Kg / 20 Ibs
17.4 Kg / 38.4 Ibs
23.6 Kg / 52 Ibs
VESA
200 x 200 mm
400 x 400 mm
400 x 400 mm
Display Color
1073.7 M
Maximum Pixel Clock
148.5 MHz
Panel
2Display area
Dimensions (W x H x D)
H
V
3
Dimensions (W x H x D)
D
Synchronization
H
Horizontal
Frequency
30~81 kHz
Vertical
Frequency
56~85 Hz
W
141
Model Name
Resolution
LE32C
Optimum
resolution
1920 x 1080 @ 60 Hz
Maximum
resolution
1920 x 1080 @ 60 Hz
Power Supply
LE46C
LE55C
This product uses 100 to 240V.
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Signal connectors
Environmental
considerations
Input
PC, DVI, AV, Component, HDMI1, HDMI2, Audio In, RJ45, RS232C IN, External Ambient Sensor, PIM(option)
Output
Audio Out, RS232C Out, IR Out
Optional Network
USB3.0 2port, USB2.0 2port, LAN, DP out, MIC in, Audio Out
Operating
Temperature
With PIM: 50 F~104 F (10 C~ 40 C) / Without PIM: 32 F~104 F (0 C~ 40 C)
Humidity: 10% ~ 80%, non-condensing
Storage
Temperature: -4 F~113 F (-20 C~ 45 C)
Humidity: 5% ~ 95%, non-condensing
――Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems.
Two-way data exchange between the monitor and PC system optimizes the monitor settings.
Monitor installation takes place automatically. However, you can customize the installation settings if desired.
――Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel.
This does not affect product performance.
――This device is a Class A digital apparatus.
142
[Recommendation] - EU Only
•• Hereby, Samsung Electronics, declares that this Monitor is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
•• The official Declaration of Conformity may be found at http://www.samsung.com, go to Support > Search Product
Support and enter the model name.
•• This equipment may be operated in all EU countries.
(USA only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
143
PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used
for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Powersavign mode only functions when the product is connected to a PC with a power-saving function.
LE32C
PowerSaver
Normal Operation
Rating
Without PIM
Power Indicator
On (Green)
Power Consumption
70 W
Power saving mode
Power off
(Power Button off)
Blinking
On (Orange)
Lower than 0.5 W
Lower than 0.5 W
Power saving mode
Power off
(Power Button off)
Blinking
On (Orange)
Lower than 0.5 W
Lower than 0.5 W
Typical
With PIM
130 W
57 W
LE46C
PowerSaver
Normal Operation
Rating
Without PIM
Power Indicator
On (Green)
Power Consumption
120 W
Typical
With PIM
180 W
99 W
144
LE55C
PowerSaver
Normal Operation
Rating
Without PIM
Power Indicator
On (Green)
Power Consumption
140 W
Power saving mode
Power off
(Power Button off)
Blinking
On (Orange)
Lower than 0.5 W
Lower than 0.5 W
Typical
With PIM
200 W
123 W
――The displayed power consumption level can vary in different operating conditions or when settings are changed.
――SOG(Sync On Green) is not supported.
――To reduce the power consumption to 0, turn off the switch at the back or disconnect the power cord.
Disconnect the power cable if you will not be using the product for an extended period of time (during vacation, etc.).
145
Preset Timing Modes
――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel.
Using a resolution other than the specified resolution may degrade the picture quality.
To avoid this, it is recommended that you select the optimum resolution specified for your product.
Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product.
If the LCD product does not support 85Hz, change the vertical frequency to 60Hz using the CDT product before you exchange it with the LCD product.
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC.
If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power LED on.
In such a case, change the settings according to the following table by referring to the graphics card user manual.
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 640 x 480
31,469
59,940
25,175
-/-
IBM, 720 x 400
31,469
70,087
28,322
-/+
MAC, 640 x 480
35,000
66,667
30,240
-/-
MAC, 832 x 624
49,726
74,551
57,284
-/-
VESA, 640 x 480
37,861
72,809
31,500
-/-
VESA, 640 x 480
37,500
75,000
31,500
-/-
VESA, 800 x 600
35,156
56,250
36,000
+/+
VESA, 800 x 600
37,879
60,317
40,000
+/+
VESA, 800 x 600
48,077
72,188
50,000
+/+
VESA, 800 x 600
46,875
75,000
49,500
+/+
VESA, 1024 x 768
48,363
60,004
65,000
-/-
VESA, 1024 x 768
56,476
70,069
75,000
-/-
146
Resolution
-- Horizontal Frequency
The time to scan one line connecting the
right edge to the left edge of the screen
horizontally is called the Horizontal Cycle
and the inverse number of the Horizontal
Cycle is called the Horizontal Frequency.
Unit: kHz
-- Vertical Frequency
Like a fluorescent lamp, the screen has to
repeat the same image many times per
second to display an image to the user.
The frequency of this repetition is called
the Vertical Frequency or Refresh Rate.
Unit: Hz
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1024 x 768
60,023
75,029
78,750
+/+
VESA, 1152 x 864
67,500
75,000
108,000
+/+
MAC, 1152 x 870
68,681
75,062
100,000
-/-
VESA, 1280 x 720
45,000
60,000
74,250
+/+
VESA, 1280 x 800
49,702
59,810
83,500
-/+
VESA, 1280 x 1024
63,981
60,020
108,000
+/+
VESA, 1280 x 1024
79,976
75,025
135,000
+/+
VESA, 1366 x 768
47,712
59,790
85,500
+/+
VESA, 1440 x 900
55,935
59,887
106,500
-/+
VESA(RB), 1600 x 900
60,000
60,000
108,000
+/+
VESA, 1680 x 1050
65,290
59,954
146,250
-/+
VESA,1920 x 1080
67,500
60,000
148,500
+/+
147
Chapter 12
Appendix
Contact SAMSUNG WORLD WIDE
――If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
NORTH AMERICA
U.S.A
1-800-SAMSUNG (726-7864)
http://www.samsung.com
CANADA
1-800-SAMSUNG (726-7864)
http://www.samsung.com/ca (English)
http://www.samsung.com/ca_fr (French)
MEXICO
01-800-SAMSUNG (726-7864)
http://www.samsung.com
ARGENTINE
0800-333-3733
http://www.samsung.com
BOLIVIA
800-10-7260
http://www.samsung.com
BRAZIL
0800-124-421
4004-0000
http://www.samsung.com
CHILE
800-SAMSUNG (726-7864)
From mobile 02-482 82 00
http://www.samsung.com
COLOMBIA
01-8000112112
http://www.samsung.com
LATIN AMERICA
148
LATIN AMERICA
COSTA RICA
0-800-507-7267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
DOMINICA
1-800-751-2676
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
ECUADOR
1-800-10-7267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
EL SALVADOR
800-6225
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
GUATEMALA
1-800-299-0013
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
HONDURAS
800-27919267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
JAMAICA
1-800-234-7267
http://www.samsung.com
NICARAGUA
00-1800-5077267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
PANAMA
800-7267
http://www.samsung.com/latin (Spanish)
http://www.samsung.com/latin_en (English)
PERU
0-800-777-08
http://www.samsung.com
PUERTO RICO
1-800-682-3180
http://www.samsung.com
TRINIDAD & TOBAGO
1-800-SAMSUNG (726-7864)
http://www.samsung.com
VENEZUELA
0-800-100-5303
http://www.samsung.com
149
EUROPE
AUSTRIA
0810 - SAMSUNG (7267864, € 0.07/min)
http://www.samsung.com
BELGIUM
02-201-24-18
http://www.samsung.com/be (Dutch)
http://www.samsung.com/be_fr (French)
BOSNIA
05 133 1999
http://www.samsung.com
BULGARIA
07001 33 11, normal tariff
http://www.samsung.com
CROATIA
062 SAMSUNG (062 726 7864)
http://www.samsung.com
CYPRUS
8009 4000 only from landline
(+30) 210 6897691 from mobile and land line
http://www.samsung.com
CZECH
800 - SAMSUNG (800-726786)
http://www.samsung.com
Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8
DENMARK
70 70 19 70
http://www.samsung.com
EIRE
0818 717100
http://www.samsung.com
ESTONIA
800-7267
http://www.samsung.com
FINLAND
09 85635050
http://www.samsung.com
FRANCE
01 48 63 00 00
http://www.samsung.com
GERMANY
0180 5 SAMSUNG bzw.
0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem Mobilfunk max.
0,42 €/Min.)
http://www.samsung.com
GREECE
80111-SAMSUNG (80111 726 7864) only from land line
(+30) 210 6897691 from mobile and land line
http://www.samsung.com
HUNGARY
06-80-SAMSUNG (726-7864)
http://www.samsung.com
150
EUROPE
ITALIA
800-SAMSUNG (726-7864)
http://www.samsung.com
LATVIA
8000-7267
http://www.samsung.com
LITHUANIA
8-800-77777
http://www.samsung.com
LUXEMBURG
261 03 710
http://www.samsung.com
MONTENEGRO
020 405 888
http://www.samsung.com
NETHERLANDS
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
http://www.samsung.com
NORWAY
815 56480
http://www.samsung.com
POLAND
0 801-1SAMSUNG (172-678)
+48 22 607-93-33
http://www.samsung.com
PORTUGAL
808 20-SAMSUNG (808 20 7267)
http://www.samsung.com
ROMANIA
08008 SAMSUNG (08008 726 7864)
TOLL FREE No.
http://www.samsung.com
SERBIA
0700 SAMSUNG (0700 726 7864)
http://www.samsung.com
SLOVAKIA
0800 - SAMSUNG (0800-726 786)
http://www.samsung.com
SPAIN
902 - 1 - SAMSUNG (902 172 678)
http://www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
http://www.samsung.com
SWITZERLAND
0848 - SAMSUNG (7267864, CHF 0.08/min)
http://www.samsung.com/ch (German)
http://www.samsung.com/ch_fr (French)
U.K
0330 SAMSUNG (7267864)
http://www.samsung.com
151
CIS
ARMENIA
0-800-05-555
http://www.samsung.com
AZERBAIJAN
088-55-55-555
http://www.samsung.com
BELARUS
810-800-500-55-500
http://www.samsung.com
GEORGIA
0-800-555-555
http://www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500 (GSM: 7799)
http://www.samsung.com
KYRGYZSTAN
00-800-500-55-500
http://www.samsung.com
MOLDOVA
0-800-614-40
http://www.samsung.com
MONGOLIA
+7-800-555-55-55
http://www.samsung.com
RUSSIA
8-800-555-55-55
http://www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
http://www.samsung.com
UKRAINE
0-800-502-000
http://www.samsung.com/ua (Ukrainian)
http://www.samsung.com/ua_ru (Russian)
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com
AUSTRALIA
1300 362 603
http://www.samsung.com
CHINA
400-810-5858
http://www.samsung.com
HONG KONG
(852) 3698-4698
http://www.samsung.com/hk (Chinese)
ASIA PACIFIC
http://www.samsung.com/hk_en (English)
152
ASIA PACIFIC
INDIA
1800 1100 11
http://www.samsung.com
3030 8282
1800 3000 8282
1800 266 8282
INDONESIA
0800-112-8888
http://www.samsung.com
021-5699-7777
JAPAN
0120-327-527
http://www.samsung.com
MALAYSIA
1800-88-9999
http://www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG (726-7864) for PLDT
1-800-3-SAMSUNG (726-7864) for Digitel
1-800-8-SAMSUNG (726-7864) for Globe
02-5805777
http://www.samsung.com
SINGAPORE
1800-SAMSUNG (726-7864)
http://www.samsung.com
TAIWAN
0800-329-999
0266-026-066
http://www.samsung.com
THAILAND
1800-29-3232
02-689-3232
http://www.samsung.com
VIETNAM
1 800 588 889
http://www.samsung.com
153
MIDDLE EAST
BAHRAIN
8000-4726
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
EGYPT
08000-726786
http://www.samsung.com
IRAN
021-8255
http://www.samsung.com
JORDAN
800-22273
http://www.samsung.com
065777444
KUWAIT
183-2255
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
MOROCCO
080 100 2255
http://www.samsung.com
OMAN
800-SAMSUNG (726-7864)
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
SAUDI ARABIA
9200-21230
http://www.samsung.com/ae (English)
http://www.samsung.com/ae_ar (Arabic)
TURKEY
444 77 11
http://www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
http://www.samsung.com
ANGOLA
91-726-7864
http://www.samsung.com
BOTSWANA
0800-726-000
http://www.samsung.com
CAMEROON
7095- 0077
http://www.samsung.com
COTE D’ IVOIRE
8000 0077
http://www.samsung.com
AFRICA
154
AFRICA
GHANA
0800-10077
http://www.samsung.com
0302-200077
KENYA
0800 545 545
http://www.samsung.com
NAMIBIA
8197267864
http://www.samsung.com
NIGERIA
0800-726-7864
http://www.samsung.com
SENEGAL
800-00-0077
http://www.samsung.com
SOUTH AFRICA
0860-SAMSUNG (726-7864)
http://www.samsung.com
TANZANIA
0685 88 99 00
http://www.samsung.com
UGANDA
0800 300 300
http://www.samsung.com
ZAMBIA
211350370
http://www.samsung.com
155
Responsibility for the Pay Service
(Cost to Customers)
――When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•• External impact or drop.
•• Use of supplies or separatly sold product unspecified by Samsung.
Not a product defect
•• Repair from a person besides an engineer of outsourcing service company or partner of Samsung
Electronics Co., Ltd.
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•• Remodeling or repairing the product by customer.
•• If a service technician gives instructions on how to use product or simply adjusts options without
disassembling product.
•• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.)
•• If a product is reinstalled or devices are connected additionally after installing the purchased
product for the first time.
•• If a product is reinstalled to move to a different spot or to move to a different house.
•• If customer requests instructions on how to use because of another company's product.
•• If customer requests instructions on how to use the network or another company's program.
•• If customer requests software installation and setup for the product.
•• Using it with incorrect voltage or non-authorised electrical connections.
•• Not following the "cautions" in User Manual.
Others
•• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head, Vibrator,
Lamp, Filter, Ribbon, etc.)
――If customer requests a service in case the product has no defect, service fee may be charged. So
please read User Manual first.
•• If a service technician removes/cleans dusts or foreign materials inside of the product.
•• If customer requests an installation additionally after purchasing a product through homeshopping or online.
156
Correct Disposal
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of
with other household waste at the end of their working life. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take these
items for environmentally safe recycling. Business users should contact their supplier
and check the terms and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
The marking on the battery, manual or packaging indicates that the battery in this
product should not be disposed of with other household waste. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or
lead above the reference levels in EC Directive 2006/66.
The battery incorporated in this product is not user replaceable. For information on
its replacement, please contact your service provider. Do not attempt to remove the
battery or dispose it in a fire. Do not disassemble, crush, or puncture the battery. If
you intend to discard the product, the waste collection site will take the appropriate
measures for the recycling and treatment of the product, including the battery.
157
Optimum Picture Quality and Afterimage Burn-in Prevention
Optimum Picture Quality
•• To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may
degrade if the optimum resolution is not selected.
-- Resolution: 1920 x 1080 @ 60 Hz
-- Vertical frequency (refresh rate): 58 ~ 85 Hz
Screen refresh rate: refers to the number of times a display image is refreshed per second.
•• Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel.
This does not affect product performance.
-- The number of sub-pixels by panel type: 6,220,800
•• Run Auto Adjustment to improve the picture quality. If noise is still found even after auto adjustment, adjust Coarse or Fine.
•• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
-- Activate power-saving mode or a dynamic screen saver if you will not be using the product for an extended period of time.
•• Unlike CDT monitors, TFT-LCD monitors (due to the nature of the panel) can be set to only one resolution to obtain the optimum picture quality.
Therefore, setting a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum
resolution specified for your monitor.
158
Prevention of Afterimage Burn-in
Black Matrix
Common
Electrode (ITO)
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously
changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight
voltage difference may occur between the electrodes in pixels that control the liquid crystals.
Color-Filter
Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner. When this occurs,
a previous image can remain on the screen when the pattern changes. To prevent this, the accumulated voltage difference
should be reduced.
――Afterimage burn-in should not occur when an LCD panel is operating in proper conditions.
Source
Drain
Preventing afterimage burn-in
――The best way to protect the product from afterimage burn-in is switching the power off or setting the PC or system to run a
screen saver when not in use. Also, Warranty service may be limited depending on instruction guide.
Gate
TFT
Data Bus-Line
Pixel Electrode (ITO)
Storage
Capaccitor (Cs)
•• Powering Off, Screen Saver and Power Saving Mode
-- Power off the product for 4 hours after using it for 20 hours.
-- Power off the product for 2 hours after using it for 12 hours.
-- Go to Display Properties > Power Supply on your PC and set the product to power off as required.
-- Using a screen saver is recommended.
It is best to use a single-color or moving-image screen saver.
•• Regular color Change
-- Use 2 colors
Switch between 2 colors every 30 minutes as shown above.
Type 1
Type 2
FLIGHT
TIME
FLIGHT
TIME
OZ348
20:30
OZ348
20:30
UA102
21:10
UA102
21:10
159
•• Avoid combinations of a text color and background color of contrasting brightness.
――Avoid using grey as it may contribute to afterimage burn-in.
――Avoid using colors of contrasting brightness (black and white; grey).
*Brightness: refers to the lightness
or darkness of a color which varies
depending on the amount of light
emitted.
FLIGHT : TIME
FLIGHT : TIME
OZ348 : 20:30
OZ348 : 20:30
•• Regular Text color Change
-- Use bright colors of similar brightness.
Interval: Change text color and background color every 30 minutes
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
-- Move and change text every 30 minutes as shown below.
FLIGHT
: TIME
FLIGHT
: TIME
OZ348
: 20:30
OZ348
: 20:30
[ Step 1 ]
[ Step 2 ]
[ Step 3 ]
-- Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4 hours.
160
License
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
DivX Certified Ⓡ to play DivX Ⓡ video up to HD 1080p, including premium
content.
DivXⓇ, DivX CertifiedⓇ and associated logos are trademarks of DivX, Inc. and
are used under license.
Ⓡ
Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380,
5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723,
7,392,195, 7,930,184, 7,333,929 and 7,548,853. DTS, the Symbol, and DTS and
the Symbol together are registered trademarks & DTS Premium Sound | 5.1 is a
trademark of DTS, Inc. ⓒ2012 DTS, Inc. All Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in
the United States and other countries.
ABOUT DIVX VIDEO: DivXⓇ is a digital video format created by DivX, Inc. This is an official DivX
CertifiedⓇ device that plays DivX video. Visit www.divx.com for more information and software tools
to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX CertifiedⓇ device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274
Open Source Licence Notice
In the case of using open source software, Open Source Licences are available on the product menu.
Open Source Licence Notice is written only English.
161
Terminology
480i / 480p / 720p / 1080i /
1080p____ Each of the scanning
rates above refers to the number of
effective scanning lines that decides
the screen resolution. The scanning
rate may be indicated in i (interlaced)
or p (progressive), depending on the
scanning method.
- Scanning
Scanning refers to a process of sending
pixels that form an image progressively.
A larger number of pixels will deliver a
clearer and more vivid picture.
- Progressive
In progressive scan mode, all lines
of pixels are scanned one by one
(progressively) on the screen.
- Interlaced
In interlaced scan mode, every other
line of pixels is scanned from top to
bottom first and then the remaining
lines of pixels (that were not scanned)
are scanned.
Non-interlace Mode and Interlace
Mode____ Non-interlace mode
(progressive scan) displays a horizontal
line from the top to the bottom of a
screen progressively. Interlace mode
displays the odd number lines first
and the even number lines next. Noninterlace mode is mainly used in
monitors as it produces screen clarity
and interlace mode is mainly used in
TVs.
Dot Pitch____ The product and screen
consist of red, green and blue dots.
A shorter distance between the dots
produces a higher resolution. Dot pitch
refers to the distance between the
shortest distance between dots of the
same color. Dot pitch is measured in
millimeters.
Vertical Frequency____ The product
displays a single image many times
per second (like a fluorescent light that
flickers) to display an image for a viewer
to see. The rate of a single image being
displayed repeatedly per second is
called vertical frequency or refresh rate.
Vertical frequency is measured in Hz.
E.g. 60Hz refers to a single image being
displayed 60 times in one second.
Horizontal Frequency____ The time
required to scan a single line from the
left to the right side of the screen is
called a horizontal cycle. The reciprocal
number of a horizontal cycle is called
horizontal frequency. Horizontal
frequency is measured in kHz.
Source____ Input source refers to a
video source device connected to the
product such as a camcorder or video
or DVD player.
Component ports (green, blue and
red)____ The component ports, which
identify, transmit and receive contrast
signals, provide superior picture quality
to any other video connection methods.
DVD (Digital Versatile Disc)____ DVD
refers to a CD-sized mass storage disk
where you can save multimedia (audio,
video or game) applications using
MPEG-2 video compression technology.
Plug & Play____ Plug & Play is a
function that allows the automatic
exchange of information between a
monitor and PC to produce an optimum
display environment. The product uses
VESA DDC (international standard) to
execute Plug & Play.
HDMI (High Definition Multimedia
Interface)____ It is an interface that
can be connected to a digital audio
source as well as a high-definition video
source by using a single cable without
compression.
Resolution____ Resolution is the
number of horizontal dots (pixels) and
vertical dots (pixels) that form a screen.
It represents the level of display detail.
A higher resolution enables more
data to be displayed on the screen
and is useful to perform multiple tasks
simultaneously.
E.g. A resolution of 1920 X 1080 consists
of 1,920 horizontal pixels (horizontal
resolution) and 1,080 vertical pixels
(vertical resolution).
Multiple Display Control (MDC)____
MDC (Multiple Display Control) is an
application that allows multiple display
devices to be controlled simultaneously
using a PC. Communication between
a PC and monitor takes place using
RS232C (serial data transmission) and
RJ45 (LAN) cables.
162
Download PDF

advertising