Samsung | UH46F5 | Samsung UH46F5 Benutzerhandbuch

User Manual
UH46F5
The colour and the appearance may differ depending on the product, and the specifications are
subject to change without prior notice to improve the performance.
Table of contents
Before Using the Product
Copyright5
Safety Precautions
6
Symbols6
Cleaning6
Storage7
Electricity and Safety
7
Installation8
Operation10
Precautions when handling the panel
13
Preparations
Checking the Components
14
Components14
Remote Control (RS232C)
23
Cable Connection
23
Connection26
Control Codes
27
MDC Programme Installation/Uninstallation45
Installation45
Uninstallation45
Connecting to MDC
Using MDC via RS-232C (serial data
communications standards)
Using MDC via Ethernet
Connecting and Using
a Source Device
Before Connecting
Pre-connection Checkpoints
Using MDC
46
46
47
36
36
Connecting to a PC
36
Connection using the DVI-RGB cable 36
Connection using a DVI cable (Digital type) 37
Connection Using an HDMI-DVI Cable
37
Connection Using an HDMI Cable
38
Connection Using an DP Cable
38
Home feature
Video Wall49
Video Wall49
Horizontal x Vertical49
Screen Position50
Format50
Parts15
Remote sensor
15
Reverse Side
16
Remote Control
17
Anti-theft Lock
19
Connecting to a Video Device
Connection Using an HDMI-DVI Cable
Connection Using an HDMI Cable
39
39
40
Connecting to an Audio System
40
Before Installing the Product (Installation
Guide)20
Switching between portrait and landscape 20
Ventilation20
Connecting the LAN Cable
41
Connecting the Network box
(Sold separately)
42
MagicInfo42
Network Settings54
Installing the Wall Mount
Preparing before installing Wall-Mount
Installing the Wall Mount
Wall Mount Kit Specifications (VESA)
Changing the Input source
44
Source44
ID Settings56
Device ID56
Device ID Auto Set56
PC Connection Cable56
22
22
22
22
Picture Mode51
On/Off Timer52
On Timer52
Off Timer52
Holiday Management53
MagicInfo Player I55
2
Table of contents
Clone Product57
Reset Picture63
More settings58
MagicInfo I Source68
OnScreen Display
Screen Adjustment
Picture Mode59
Backlight / Brightness / Contrast / Sharpness /
Color / Tint (G/R)60
Color Temperature60
White Balance60
Gamma60
Calibrated Value60
Picture Options61
Color Tone61
HDMI Black Level61
Dynamic Backlight61
UHD COLOR61
Picture Size62
Picture Size62
Position62
Zoom/Position62
Resolution63
Auto Adjustment63
PC Screen Adjustment63
Picture Off63
Power On Delay68
Display Orientation64
Onscreen Menu Orientation64
Source Content Orientation64
Aspect Ratio64
Screen Protection65
Pixel Shift65
Timer65
Immediate Display65
Side Gray65
Message Display66
Source Info66
No Signal Message66
MDC Message66
Menu Language66
Reset OnScreen Display66
Auto Source Switching68
Auto Source Switching68
Primary Source Recovery68
Primary Source69
Secondary Source69
Power Control69
Auto Power On69
PC Module Power69
Standby Control69
Network Standby69
Power Button69
Eco Solution70
Energy Saving70
Screen Lamp Schedule70
No Signal Power Off 70
Auto Power Off70
Temperature Control70
Change PIN71
System
General71
Security71
HDMI Hot Plug71
Setup67
Frame Alignment71
Time67
Clock Set67
DST68
Sleep Timer68
Reset System71
3
Table of contents
Sound Adjustment
Specifications
HDMI Sound72
General84
Sound on Video Call72
Preset Timing Modes
85
Reset Sound72
Appendix
Support
Software Update73
Contact Samsung73
Go to Home73
Reset All73
Troubleshooting Guide
Responsibility for the Pay Service
(Cost to Customers)
88
Not a product defect
88
A Product damage caused by customer's
fault88
Others88
Optimum Picture Quality and Afterimage
Burn-in Prevention
Optimum Picture Quality
Prevention of Afterimage Burn-in
89
89
89
Licence91
Requirements Before Contacting Samsung
Customer Service Centre
Testing the Product
Checking the Resolution and Frequency
Check the followings.
74
74
74
75
Q & A
82
Terminology92
4
Chapter 01
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2016 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
•• An administration fee may be charged if either
–– (a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
–– (b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
•• The amount of such administration charge will be advised to you before any work or home visit is carried
out.
5
Safety Precautions
Caution
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
――Take the following steps when cleaning.
――The following images are for reference only. Real-life situations may differ from what is
shown in the images.
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK)
THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
1
Power off the product and computer.
2
Disconnect the power cord from the product.
――Hold the power cable by the plug and do not touch the cable with
wet hands. Otherwise, an electric shock may result.
This symbol indicates that high voltage is present inside.
3
It is dangerous to make any kind of contact with any internal part of this product.
Wipe the product with a clean, soft and dry cloth.
•• Do not use detergents that contain alcohol, solvent
or surface-active agents.
This symbol alerts you that important literature concerning operation and maintenance has
been included with this product.
!
•• Do not spray water or detergent directly on the
product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
4
Wet a soft and dry cloth in water and wring thoroughly to clean
the exterior of the product.
Caution
Personal injury or damage to properties may result if instructions are not followed.
5
Connect the power cord to the product when cleaning is
finished.
Activities marked by this symbol are prohibited.
6
Power on the product and computer.
Instructions marked by this symbol must be followed.
6
Storage
Connect the power plug to a grounded power socket
(type 1 insulated devices only).
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create
white-coloured stains on the product.
――Contact Customer Service Centre if the inside of the product needs cleaning (service fee will
•• An electric shock or injury may result.
!
Do not bend or pull the power cord with force. Be careful not to leave
the power cord under a heavy object.
be charged).
Electricity and Safety
•• Damage to the cord may result in a fire or electric shock.
――The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Do not place the power cord or product near heat sources.
•• A fire or electric shock may result.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•• An electric shock or fire may result.
Clean any dust around the pins of the power plug or the power socket
with a dry cloth.
•• A fire may result.
Do not use multiple products with a single power socket.
•• Overheated power sockets may cause a fire.
!
Do not touch the power plug with wet hands. Otherwise, an electric
shock may result.
Insert the power plug all the way in so it is not loose.
•• An unsecure connection may cause a fire.
!
7
Installation
Caution
Do not disconnect the power cord while the product is being used.
•• The product may become damaged by an electric shock.
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON
TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT
SOURCES.
Only use the power cord provided with your product by Samsung. Do
not use the power cord with other products.
•• A fire may result.
•• A fire or electric shock may result.
Have a technician install the wall-mount hanger.
!
•• Installation by an unqualified person can result in an injury.
Keep the power socket where the power cord is connected
unobstructed.
•• Only use approved cabinets.
!
•• The power cord must be disconnected to cut off power to the
product when an issue occurs.
!
Do not install the product in poorly ventilated spaces such as a
bookcase or closet.
•• Note that the product is not completely powered down by using
only the power button on the remote.
•• An increased internal temperature may cause a fire.
Hold the plug when disconnecting the power cord from the power
socket.
Install the product at least 10 cm away from the wall to allow
ventilation.
•• An electric shock or fire may result.
•• An increased internal temperature may cause a fire.
!
!
Keep the plastic packaging out of the reach of children.
•• Children may suffocate.
!
8
Do not install the product on an unstable or vibrating surface
(insecure shelf, sloped surface, etc.)
Caution
•• The product may fall and become damaged and/or cause an
injury.
•• Using the product in an area with excess vibration may damage
the product or cause a fire.
Do not drop the product while moving.
•• Product failure or personal injury may result.
!
Do not install the product in a vehicle or a place exposed to dust,
moisture (water drips, etc.), oil, or smoke.
Do not set down the product on its front.
•• The screen may become damaged.
•• A fire or electric shock may result.
!
Do not expose the product to direct sunlight, heat, or a hot object
such as a stove.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
•• The product lifespan may be reduced or a fire may result.
•• The product may fall and become damaged and/or cause an
injury.
•• Install the product only on cabinets or shelves of the right size.
Do not install the product within the reach of young children.
Set down the product gently.
•• The product may fall and injure children.
•• Product failure or personal injury may result.
•• As the front is heavy, install the product on a flat and stable
surface.
!
Edible oil, such as soybean oil, can damage or deform the product. Do
not install the product in a kitchen or near a kitchen counter.
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of
fine dust, chemical substances, extreme temperatures or a significant
presence of moisture, or a place where the product will operate
continuously for an extended period of time) may seriously affect its
performance.
•• Be sure to consult Samsung Customer Service Centre if you want
to install the product at such a place.
9
Operation
Do not leave heavy objects or items that children like (toys, sweets,
etc.) on top of the product.
•• The product or heavy objects may fall as children try to reach for
the toys or sweets resulting in a serious injury.
Warning
There is a high voltage inside the product. Never disassemble, repair
or modify the product yourself.
During a lightning or thunderstorm, power off the product and
remove the power cable.
•• A fire or electric shock may result.
•• A fire or electric shock may result.
•• Contact Samsung Customer Service Centre for repairs.
!
Before moving the product, turn off the power switch and disconnect
the power cable and all other connected cables.
Do not drop objects on the product or apply impact.
•• A fire or electric shock may result.
•• Otherwise, the power cord may be damaged and a fire or electric
shock may result.
!
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung
Customer Service Centre.
Do not move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a
damaged cable.
•• An electric shock or fire may result.
!
Do not let children hang from the product or climb on top of it.
If a gas leakage is found, do not touch the product or power plug.
Also, ventilate the area immediately.
•• Children may become injured or seriously harmed.
•• Sparks can cause an explosion or fire.
!
If the product is dropped or the outer case is damaged, turn off the
power switch and disconnect the power cord. Then contact Samsung
Customer Service Centre.
•• Continued use can result in a fire or electric shock.
GAS
Do not lift or move the product by pulling the power cord or any
cable.
•• Product failure, an electric shock or fire may result from a
damaged cable.
10
Do not use or keep combustible spray or an inflammable substance
near the product.
Caution
•• An explosion or fire may result.
Leaving the screen fixed on a stationary image for an extended period
of time may cause afterimage burn-in or defective pixels.
!
Ensure the vents are not blocked by tablecloths or curtains.
•• Activate power-saving mode or a moving-picture screen saver if
you will not be using the product for an extended period of time.
!
•• An increased internal temperature may cause a fire.
-_100
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or
objects that burn easily (paper, matches, etc) into the product (via the
vent or input/output ports, etc).
•• Dust accumulation combined with heat can cause a fire, electric
shock or electric leakage.
!
Use the product at the recommended resolution and frequency.
•• Be sure to power off the product and disconnect the power
cord when water or other foreign substances have entered the
product. Then contact Samsung Customer Service Centre.
•• Product failure, an electric shock or fire may result.
Disconnect the power cord from the power socket if you do not plan
on using the product for an extended period of time (vacation, etc).
•• Your eyesight may deteriorate.
!
Do not hold the product upside-down or move it by holding the stand.
Do not place objects containing liquid (vases, pots, bottles, etc) or
metallic objects on top of the product.
•• The product may fall and become damaged or cause an injury.
•• Be sure to power off the product and disconnect the power
cord when water or other foreign substances have entered the
product. Then contact Samsung Customer Service Centre.
•• Product failure, an electric shock or fire may result.
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
!
Do not use humidifiers or stoves around the product.
•• A fire or electric shock may result.
11
Rest your eyes for more than 5 minutes for every 1 hour of product
use.
Be careful that children do not place the battery in their mouths
when removed from the remote control. Place the battery in a
location that children or infants cannot reach.
•• Eye fatigue will be relieved.
•• If children have had the battery in their mouths, consult your
doctor immediately.
!
Do not touch the screen when the product has been turned on for an
extended period of time as it will become hot.
When replacing the battery, insert it with the right polarity (+, -).
Store small accessories out of the reach of children.
Use only the specified standardised batteries, and do not use a new
battery and a used battery at the same time.
!
•• Otherwise, the battery may become damaged or it may cause
fire, personal injury or damage due to leakage of the internal
liquid.
!
Exercise caution when adjusting the product angle or stand height.
The batteries (and rechargeable batteries) are not ordinary refuse
and must be returned for recycling purposes. The customer is
responsible for returning the used or rechargeable batteries for
recycling.
•• Your hand or finger may get stuck and injured.
!
•• Tilting the product at an excessive angle may cause the product
to fall and an injury may result.
Do not place heavy objects on the product.
•• Otherwise, the batteries may be damaged or cause fire, personal
injury or damage due to a leakage of the internal liquid.
!
•• The customer can return used or rechargeable batteries to a
nearby public recycling Centre or to a store selling the same
type of the battery or rechargeable battery.
•• Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too
high.
•• Having the sound too loud may damage your hearing.
12
Precautions when handling the panel
Do not stand the product as shown in the image. The panel is fragile
and can get damaged.
Lay the product down to handle it as shown in the image. (the
packaging can be used).
!
Ensure you use the handles on the back when moving the product.
!
15 mm
Do not hold or grasp any area of the product within 15 mm from the
front.
13
Chapter 02
Preparations
Checking the Components
–– Contact the vendor where you
purchased the product if any
components are missing.
Components
–– The pictures may look different from
the actual components.
–– A wall mount kit is not provided with
the product. To install a stand, you
can purchase one separately.
Quick Setup Guide
Warranty card
(Not available in some locations)
Regulatory guide
Power cord
DP cable
RS232C(IN) adapter
–– The RS232C adapter can be used to
connect to another monitor using the
D-SUB (9-pin) type RS232C cable.
Batteries
(Not available in some locations)
Remote Control
Holder-Ring (4EA) / Screw (4EA)
14
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice
Parts
to improve quality.
Parts
Remote sensor
Remote sensor
Remote sensor
Description
Press a button on the remote control pointing at the sensor on the front of the product
to perform the corresponding function.
――Using other display devices in the same space as the remote control of this product
can cause the other display devices to be inadvertently controlled.
Make sure that the remote control is used within 4 m from the screen and within 2 m and 50 degrees of the left and
right sides of the monitor. The remote control location may affect the sensor's signal reception.
――Store used batteries out of reach of children and recycle.
――Do not use a new and used battery together. Replace both batteries at the same time.
――Remove batteries when the remote control is not to be used for an extended period of time.
15
Reverse Side
Port
――The colour and shape of parts may differ from what is shown.
CONTROL IN
Supplies power to the external sensor board.
USB
Connect to a USB memory device. (applicable for updates and Clone Product only)
RJ45
Connects to MDC using a LAN cable.
DVI/RGB/MAGICINFO IN
DVI: Connects to a source device using a DVI cable or HDMI-DVI cable.
RGB: Connects a D-SUB cable (via a DVI-RGB adapter) or a DVI-RGB cable to a PC.
MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
HDMI 1, HDMI 2
Connects to a source device using an HDMI cable.
DP IN
Connects to a PC using a DP cable.
RS232C IN
Connects to MDC using an RS232C adapter.
Specifications are subject to change without notice to improve quality.
CONTROL
IN
USB
RJ45
DVI/RGB/
MAGICINFO IN
RS232C OUT
HDMI 1
HDMI 2
RS232C
IN
DP IN
Description
RS232C
OUT
IR OUT
AUDIO IN
AUDIO OUT
DP OUT
(LOOPOUT)
IR OUT
Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.
AUDIO IN
Receives sound from a PC via an audio cable.
AUDIO OUT
Connects to the audio of a source device.
DP OUT (LOOPOUT)
Connects to another product using a DP cable.
――When connecting monitors through DP Loopout, using the DP cable that came
with the package is recommended.
――This port uses an algorithm that is specific to UHD resolution input and
output. The port is not compatible with monitors that have FHD contentspecific DP Loopout ports. Connecting Loopout ports between monitors of
the same model is recommended.
16
Remote Control
――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
――A button without a description in the image below is not supported on the product.
POWER
OFF
Power on the product.
.QZ
ABC
DEF
GHI
JKL
MNO
PRS
TUV
WXY
DEL-/--
SYMBOL
1
4
7
Adjust the volume.
Change the input source.
Display or hide the onscreen display menu, or
return to the previous menu.
2
5
8
0
3
6
MENU
SOURCE
HOME
Number buttons
Enter the password in the OSD menu.
9
CH LIST
Mute the sound.
–– Remote control button functions
may differ for different products.
Unmuting the sound: Press MUTE again or
press the volume control(+ VOL -) button.
MUTE
VOL
Power off the product.
CH
Use this hotkey to directly access MagicInfo
Player I.
MagicInfo
Player I
This hotkey is available when a network box
or PIM (Plug In Module) is connected.
Go to Home Launch Button.
17
Quickly select frequently used functions.
TOOLS
INFO
Display information about the current input
source.
Move to the upper, lower, left or right menu,
or adjust an option's setting.
Confirm a menu selection.
Return to the previous menu.
If multiple products are connected through the
Video Wall feature, press the SET button and
enter a product ID using the number buttons.
Control the product using the remote control.
Cancel a value that has been set using the
SET button and control all connected products
using the remote control.
RETURN
EXIT
PC
DVI
HDMI
DP
A
B
C
D
UNSET
LOCK
Exit the current menu.
Manually select a connected input source
from PC, DVI, HDMI1, HDMI2, or DisplayPort.
IR control
SET
It sets safe lock function.
–– Remote control button functions
may differ for different products.
To place batteries in the remote control
18
Anti-theft Lock
――An anti-theft lock allows you to use the product securely even in public places.
――The locking device shape and locking method depend on the manufacturer. Refer to the user
guide provided with your anti-theft locking device for details.
――The following images are for reference only. Real-life situations may differ from what is
shown in the images.
To lock an anti-theft locking device:
1
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
2
Put one end of the cable through the loop on the other end.
3
Insert the locking device into the anti-theft lock slot at the back of the product.
4
Lock the locking device.
–– An anti-theft locking device can be purchased separately.
–– Refer to the user guide provided with your anti-theft locking device for details.
–– Anti-theft locking devices can be purchased at electronics retailers or online.
19
Before Installing the Product
(Installation Guide)
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation
instructions.
•• Ensure that an authorised installation company installs the wall mount.
•• Otherwise, it may fall and cause personal injury.
•• Make sure to install the specified wall mount.
Switching between portrait and landscape
――Contact Samsung Customer Service Centre for further details.
•• To use the product in portrait orientation, rotate it clockwise.
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35 C
A
•• When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and
wall surface for ventilation and ensure that the ambient A temperature is kept below 35 C.
B
Figure 1.1 Side view
20
Figure 1.3 Side view
Installation on an Indented Wall
――Contact Samsung Customer Service Centre for further details.
B
D
D
Plane view
A Minimum 40 mm
B Minimum 70 mm
A
C Minimum 50 mm
D Minimum 50 mm
E Ambient temperature: Under 35 C
――When installing the product on an indented wall, allow at least the space specified above between the product
C
E
and wall for ventilation and ensure that the ambient temperature is kept below 35 C.
Figure 1.2 Side view
21
Installing the Wall Mount
Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring(1).
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the product on the wall.
1
For detailed information on installing the wall mount, see the instructions provided with the wall mount.
We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to
install the wall mount on your own.
Wall Mount Kit Specifications (VESA)
――Install your wall mount on a solid wall perpendicular to the floor. Before
attaching the wall mount to surfaces other than plaster board, please
contact your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in
severe personal injury.
•• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are
provided.
•• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the product.
•• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.
•• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
•• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
•• Always have two people mount the product on a wall.
•• Standard dimensions for wall mount kits are shown in the table below.
Unit: mm (inches)
VESA screw hole specs (A * B) in
millimetres
400 x 400 (15.7 x 15.7)
Standard Screw
L20 ~ L22
Quantity
4 EA
――Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to electric
shock.
22
Remote Control (RS232C)
•• Pin assignment
1 2 3 4 5
5 4 3 2 1
6 7 8 9
9 8 7 6
<Male type>
<Female type>
Cable Connection
RS232C Cable
Interface
RS232C (9 pins)
Pin
TxD (No.2), RxD (No.3), GND (No.5)
Bit rate
9600 bps
Data bits
8 bit
Parity
None
Stop bit
1 bit
Flow control
None
Maximum length
15 m (only shielded type)
Pin
Signal
1
Detect data carrier
2
Received data
3
Transmitted data
4
Prepare data terminal
5
Signal ground
6
Prepare data set
7
Send request
8
Clear to send
9
Ring indicator
23
LAN Cable
•• RS232C cable
Connector: 9-Pin D-Sub to Stereo Cable
6
•• Pin assignment
3
2
1
1
1 2 3 4 5 6 7 8
-P2-
9
-P1-
5
-P1Male type
-P1-
-P2-
-P2-
Rx
3
----------
2
Tx
STEREO
Tx
2
----------
1
Rx
PLUG
Gnd
5
----------
3
Gnd
(3.5ø)
Pin No
Standard Colour
Signal
1
White and orange
TX+
2
Orange
TX-
3
White and green
RX+
4
Blue
NC
5
White and blue
NC
6
Green
RX-
7
White and brown
NC
8
Brown
NC
24
Cross LAN cable (PC to PC)
•• Connector : RJ45
Direct LAN cable (PC to HUB)
HUB
RJ45
P2
RJ45
P1
P2
P1
P1
P2
RJ45 MDC
Signal
P1
TX+
1
P2
Signal
<-------->
3
RX+
P2
Signal
TX-
2
<-------->
6
RX-
<-------->
1
TX+
RX+
3
<-------->
1
TX+
2
<-------->
2
TX-
RX-
6
<-------->
2
TX-
RX+
3
<-------->
3
RX+
RX-
6
<-------->
6
RX-
Signal
P1
TX+
1
TX-
25
Connection
•• Connection 2
――Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the
product.
•• Connection 1
RJ45
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
RJ45
OUT
•• Connection 3
RJ45
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
IN
RS232C
OUT
26
No.
Control Codes
Viewing control state (Get control command)
Header
Command
0xAA
Command
type
ID
Data length
Command type
Command
Value range
9
Video Wall On
0x84
0~1
10
Video Wall User Control
0x89
-
Checksum
•• All communications take place in hexadecimals. The checksum is calculated by adding
up all values except the header. If a checksum adds up to be more than 2 digits as shown
below (11+FF+01+01=112), the first digit is removed.
0
E.g. Power On & ID=0
Controlling (Set control command)
Header
Command
0xAA
Command
type
ID
Data length
Data
1
Value
Checksum
Command
No.
Command type
Command
Value range
1
Power control
0x11
0~1
2
Volume control
0x12
0~100
3
Input source control
0x14
-
4
Screen mode control
0x18
-
5
Screen size control
0x19
0~255
6
Auto adjustment control (PC and
BNC only)
0x3D
0
7
Video wall mode control
0x5C
0~1
8
Safety Lock
0x5D
0~1
Header
Command
0xAA
0x11
Header
Command
0xAA
0x11
ID
ID
Data length
Data 1
1
"Power"
Data length
Data 1
1
1
Checksum
12
•• To control all devices connected by a serial cable simultaneously irrespective of IDs, set
the ID as "0xFE" and transmit commands. Commands will be executed by each device but
ACK will not respond.
27
Power control
Volume control
•• Function
A product can be powered on and off using a PC.
•• Function
The volume of a product can be adjusted using a PC.
•• Viewing power state (Get Power ON / OFF Status)
•• Viewing volume state (Get Volume Status)
Header
Command
0xAA
0x11
ID
Data length
Checksum
0
•• Setting power ON/Off (Set Power ON / OFF)
Header
Command
0xAA
0x11
ID
Header
Command
0xAA
0x12
ID
Data length
Checksum
0
•• Setting the volume (Set Volume)
Data length
Data
1
"Power"
Checksum
"Power": Power code to be set on a product.
Header
Command
0xAA
0x12
ID
Data length
Data
1
"Volume"
Checksum
"Volume": Volume value code to be set on a product. (0-100)
1: Power ON
•• Ack
0: Power OFF
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x11
"Power"
Checksum
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x11
"ERR"
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x12
"Volume"
Checksum
•• Nak
•• Nak
Command
Command
"Volume": Volume value code to be set on a product. (0-100)
"Power": Power code to be set on a product.
Header
Header
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x12
"ERR"
Checksum
"ERR" : A code showing what error has occurred.
"ERR" : A code showing what error has occurred.
28
Input source control
•• Function
The input source of a product can be changed using a PC.
Command
0xAA
0x14
ID
Data length
Command
0xAA
0x14
DisplayPort
――MagicInfo is only available with models that contain the MagicInfo function.
0
ID
0x25
respond to "Get" commands.
――This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports.
Checksum
――RF(TV), DTV are only available with models that include a TV.
•• Setting the input source (Set Input Source)
Header
HDMI2_PC
――DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only
•• Viewing input source state (Get Input Source Status)
Header
0x24
Data length
Data
1
"Input Source"
Checksum
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x14
"Input
Source"
"Input Source": An input source code to be set on a product.
0x14
PC
0x18
DVI
0x0C
Input source
0x08
Component
0x20
MagicInfo
0x1F
DVI_video
0x30
RF(TV)
0x40
DTV
0x21
HDMI1
0x22
HDMI1_PC
0x23
HDMI2
Checksum
"Input Source": An input source code to be set on a product.
•• Nak
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x14
"ERR"
Checksum
"ERR" : A code showing what error has occurred.
29
Screen mode control
•• Nak
•• Function
The screen mode of a product can be changed using a PC.
Screen mode cannot be controlled when the Video Wall function is enabled.
――This control can only be used on models that include a TV.
Command
0xAA
0x18
ID
Data length
Command
0xAA
0x18
16 : 9
0x04
Zoom
0x31
Wide Zoom
0x0B
4:3
Data length
Data
Checksum
1
"Screen Mode"
Command
0xAA
0xFF
r-CMD
Val1
3
'N'
0x18
"ERR"
Checksum
Header
Command
0xAA
0x19
ID
Data length
Checksum
0
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x19
"Screen Size"
Checksum
"Screen Size": product screen size (range: 0 – 255, unit: inch)
•• Nak
•• Ack
Header
Ack/Nak
•• Viewing the screen size (Get Screen Size Status)
"Screen Mode": A code that sets the product status
0x01
0xFF
Data length
•• Function
The screen size of a product can be changed using a PC.
0
ID
0xAA
ID
Screen size control
Checksum
•• Setting the picture size (Set Picture Size)
Header
Command
"ERR": A code showing what error has occurred
•• Viewing screen status (Get Screen Mode Status)
Header
Header
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x18
"Screen
Mode"
Checksum
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x19
"ERR"
Checksum
"ERR": A code showing what error has occurred
"Screen Mode": A code that sets the product status
30
Auto adjustment control (PC and BNC only)
Video Wall Mode Control
•• Function
Automatically adjust the PC system screen using a PC.
•• Function
Video Wall mode can be activated on a product using a PC.
This control is only available on a product whose Video Wall is enabled.
•• Viewing auto adjustment state (Get Auto Adjustment Status)
None
•• Viewing video wall mode (Get Video Wall Mode)
•• Setting auto adjustment (Set Auto Adjustment)
Header
Command
0xAA
0x3D
ID
Data length
Data
1
"Auto
Adjustment"
Checksum
Header
Command
0xAA
0x5C
ID
Data length
Checksum
0
•• Setting the video wall (Set Video Wall Mode)
Header
Command
0xAA
0x5C
ID
Data length
Data
Checksum
1
"Video Wall Mode"
"Auto Adjustment" : 0x00 (at all times)
•• Ack
Header
0xAA
Command
ID
0xFF
Data
length
Ack/Nak
3
'A'
r-CMD
Val1
Checksum
1: Full
0x3D
0: Natural
"Auto
Adjustment"
•• Ack
•• Nak
Header
0xAA
Command
0xFF
ID
"Video Wall Mode": A code used to activate Video Wall mode on a product
Data
length
Ack/Nak
3
'A'
r-CMD
0x3D
Val1
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"Video Wall
Mode"
Checksum
Checksum
"ERR"
"Video Wall Mode": A code used to activate Video Wall mode on a product
"ERR": A code showing what error has occurred
•• Nak
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5C
"ERR"
Checksum
"ERR": A code showing what error has occurred
31
Safety Lock
Video Wall On
•• Function
PC can be used to turn the Safety Lock function on or off on a product.
•• Function
Turn Video Wall on or off on the product from your computer.
This control is available regardless of whether or not the power is turned on.
•• Get Video Wall On/Off Status
•• Viewing the safety lock state (Get Safety Lock Status)
Header
Command
0xAA
0x5D
ID
Data length
Checksum
0
Command
0xAA
0x5D
ID
Command
0xAA
0x84
ID
Data length
Checksum
0
•• Set Video Wall On/Off
•• Enabling or disabling safety lock (Set Safety Lock Enable / Disable)
Header
Header
Data length
Data
1
"Safety
Lock"
Checksum
Header
Command
0xAA
0x84
ID
Data length
Data
Checksum
1
V.Wall_On
•• V.Wall_On: Video Wall code to be assigned to the product
1: Video Wall ON
"Safety Lock": Safety lock code to be set on a product
0: Video Wall OFF
1: ON
•• Ack
0: OFF
•• Ack
Header
Command
0xAA
0xFF
ID
Data
length
Ack/Nak
r-CMD
Val1
3
'A'
0x5D
"Safety Lock"
Checksum
0xAA
0xFF
ID
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'A'
0x84
V.Wall_
On
Checksum
•• Nak
•• Nak
Command
Command
V.Wall_On : Same as above
"Safety Lock": Safety lock code to be set on a product
Header
Header
Data
length
Ack/Nak
r-CMD
Val1
3
'N'
0x5D
"ERR"
Checksum
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x84
ERR
Checksum
"ERR": A code showing what error has occurred
"ERR": A code showing what error has occurred
32
Video Wall User Control
•• Function
Turn the Video Wall function on or off on the product from your computer.
•• Get Video Wall Status
Header
Command
0xAA
0x89
ID
Data length
Checksum
0
•• Set Video Wall
Header
Command
0xAA
0x89
ID
Data length
Val1
Val2
2
Wall_Div
Wall_SNo
Checksum
Wall_Div: Video Wall Divider code assigned to the product
33
10x10 Video Wall Model
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Off
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
1
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
0x19
0x1A
0x1B
0x1C
0x1D
0x1E
0x1F
2
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2A
0x2B
0x2C
0x2D
0x2E
0x2F
3
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x38
0x39
0x3A
0x3B
0x3C
0x3D
0x3E
0x3F
4
0x41
0x42
0x43
0x44
0x45
0x46
0x47
0x48
0x49
0x4A
0x4B
0x4C
0x4D
0x4E
0x4F
5
0x51
0x52
0x53
0x54
0x55
0x56
0x57
0x58
0x59
0x5A
0x5B
0x5C
0x5D
0x5E
0x5F
6
0x61
0x62
0x63
0x64
0x65
0x66
0x67
0x68
0x69
0x6A
0x6B
0x6C
0x6D
0x6E
0x6F
7
0x71
0x72
0x73
0x74
0x75
0x76
0x77
0x78
0x79
0x7A
0x7B
0x7C
0x7D
0x7E
N/A
8
0x81
0x82
0x83
0x84
0x85
0x86
0x87
0x88
0x89
0x8A
0x8B
0x8C
N/A
N/A
N/A
9
0x91
0x92
0x93
0x94
0x95
0x96
0x97
0x98
0x99
0x9A
0x9B
N/A
N/A
N/A
N/A
10
0xA1
0xA2
0xA3
0xA4
0xA5
0xA6
0xA7
0xA8
0xA9
0xAA
N/A
N/A
N/A
N/A
N/A
11
0xB1
0xB2
0xB3
0xB4
0xB5
0xB6
0xB7
0xB8
0xB9
N/A
N/A
N/A
N/A
N/A
N/A
12
0xC1
0xC2
0xC3
0xC4
0xC5
0xC6
0xC7
0xC8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
13
0xD1
0xD2
0xD3
0xD4
0xD5
0xD6
0xD7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
14
0xE1
0xE2
0xE3
0xE4
0xE5
0xE6
0xE7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
15
0xF1
0xF2
0xF3
0xF4
0xF5
0xF6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
34
Wall_SNo: Product Number code assigned to the product
10x10 Video Wall Model : ( 1 ~ 100)
Set Number
Data
1
0x01
2
0x02
...
...
99
0x63
100
0x64
•• Ack
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
Val2
4
'A'
0x89
Wall_Div
Wall_SNo
Checksum
•• Nak
Header
Command
0xAA
0xFF
ID
Data length
Ack/Nak
r-CMD
Val1
3
'N'
0x89
ERR
Checksum
"ERR": A code showing what error has occurred
35
Chapter 03
Connecting and Using a Source Device
Before Connecting
Pre-connection Checkpoints
――Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
――Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
――Connect the sound ports correctly: left = white and right = red.
Connecting to a PC
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
――Connecting parts may differ in different products.
Connection using the DVI-RGB cable
――Check the types of ports at the back of the product you want to connect.
DVI/RGB/MAGICINFO IN
AUDIO IN
36
Connection using a DVI cable (Digital type)
Connection Using an HDMI-DVI Cable
After connecting a computer to the product with an HDMI-DVI cable, make sure to configure the
settings as shown below to enable the video and audio from the computer.
•• Sound → set HDMI Sound to PC(DVI)
DVI/RGB/MAGICINFO IN
•• Picture → set each screen mode to Text under Picture Mode
•• System → General → set HDMI Hot Plug to Off
AUDIO IN
HDMI 1, HDMI 2
――You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
――Audio is not available if the DVI port on the product is connected to the HDMI port on the PC
AUDIO IN
using a DVI-HDMI adapter.
HDMI
DVI/RGB/MAGICINFO IN
37
Connection Using an HDMI Cable
Connection Using an DP Cable
HDMI 1, HDMI 2
DP IN
•• Precautions for using DP
――To increase the standby power capacity, the product stops DP communication when it is
turned off or in power-saving mode. If the product in dual monitor mode is turned off or
goes into power-saving mode, monitor setting changes may not be updated. As a result,
screen output may not be displayed properly. In the occurrence of this issue, set Max.
Power Saving to Off before using the product.
――Some graphics cards that are not compliant with the DP standard may prevent the
Windows Booting/Bios screen from being displayed when the product is in power-saving
mode. If this is the case, make sure to turn on the product first before turning on your PC.
――The DisplayPort interface (DP IN) on the product and the provided DP cable are designed
based on the VESA standards. Using a DP cable that is not VESA compliant may cause the
product to function improperly. Samsung Electronics shall not be held responsible for any
issues from using a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.
38
Connecting to a Video Device
•• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
•• You can connect a video device to the product using a cable.
――Connecting parts may differ in different products.
――Press the SOURCE button on the remote control to change the source.
Connection Using an HDMI-DVI Cable
――Audio will not be enabled if the product is connected to a video device using an HDMI-DVI
cable. To resolve this, additionally connect an audio cable to the audio ports on the product
and video device.
HDMI 1, HDMI 2
――After connecting a video device to the product with an HDMI-DVI cable, make sure to
configure the settings as shown below to enable the video and audio from the video device.
You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter. Audio
is not available if the DVI port on the product is connected to the HDMI port on the PC using a
DVI-HDMI adapter.
AUDIO IN
――Sound → set HDMI Sound to AV(HDMI)
――Picture → set each screen mode to Video/Image under Picture Mode
――System → General → set HDMI Hot Plug to On
DVI/RGB/MAGICINFO IN
HDMI
――Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
39
Connection Using an HDMI Cable
Connecting to an Audio System
Using an HDMI cable or HDMI to DVI Cable (up to 1080p)
――Connecting parts may differ in different products.
•• For better picture and audio quality, connect to a digital device using an HDMI cable.
•• An HDMI cable supports digital video and audio signals, and does not require an audio
cable.
–– To connect the product to a digital device that does not support HDMI output, use an
HDMI-DVI and audio cables.
AUDIO OUT
•• The picture may not display normally (if at all) or the audio may not work if an external
device that uses an older version of HDMI mode is connected to the product. If such a
problem occurs, ask the manufacturer of the external device about the HDMI version and,
if out of date, request an upgrade.
•• Be sure to use an HDMI cable with a thickness of 14 mm or less.
•• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
•• A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function via HDMI.
HDMI 1, HDMI 2
40
Connecting the LAN Cable
――Connecting parts may differ in different products.
RJ45
•• Use Cat7(*STP Type) cable for the connection.
*Shielded Twist Pair
41
Connecting the Network box (Sold separately)
――For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase.
MagicInfo
To use MagicInfo, a network box (sold separately) must be connected to the product.
――To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.
――For details on how to use MagicInfo, refer to the DVD provided with the network box.
――The information in this section is subject to change without notice for quality improvement.
――If a problem occurs after installing an operating system other than the one provided with the network box, restoring the previous version of the
operating system, or installing software that is not compatible with the operating system provided, you will not be able to benefit from technical support
and will be charged a fee for a visit from a service technician. A product exchange or refund will also not be available.
Entering MagicInfo mode
MagicInfo Setup Wizard - v.1.12
Select Application - step 1
MagicInfo Pro (LAN, WAN based version)
1
After installing and connecting the network box (sold separately) to the product, power on the product.
2
Press SOURCE on the remote control, and select MagicInfo.
――Connecting the network box to the DVI/RGB/MAGICINFO IN port on the product will change Source from DVI to
MagicInfo.
MagicInfo-i Premium (Web-based version)
3
Select Later
< Back(B)
Next(N) >
Finish
Select the default application you want to run when MagicInfo starts.
Cancel
42
4
MagicInfo Setup Wizard - v.1.12
Enter the IP information.
MagicInfo Setup Wizard - v.1.12
6
Select a display mode.
7
Double-check the settings you
Select Screen Type - step 4
Select TCP/IP - step 2
Obtain an IP address automatically
Use the following IP address:
Landscape
IP address:
192 . 168 . 0 . 102
Subnet mask:
255 . 255 . 255 . 0
Default gateway:
192 . 168 . 0 . 1
Portrait
Obtain DNS server address automatically
Use the following DNS server address:
Preferred DNS server:
10 . 44 . 33 . 22
Alternate DNS server:
10 . 33 . 22 . 11
< Back(B)
Next(N) >
Finish
< Back(B)
Cancel
5
MagicInfo Setup Wizard - v.1.12
Select a language. (The default
Next(N) >
Finish
Cancel
MagicInfo Setup Wizard - v.1.12
language is English.)
have just configured.
Setup Information
Select Language -step 3
Select the language you want to install on the system for menus and
dialogs.
1. Application :
Current Language
2. Internet Protocol [TCP/IP]
:
Engilsh
IP :
Chinese [Traditional]
German
4. Screen Type :
French
double-click the MagicInfo icon on
the desktop. The icon will appear at
the bottom right of the screen.
192.168.0.102
3. Language :
English
――If the execution icon does not appear,
MagicInfo Pro [LAN,WAN based version\
English
Landscape
Italian
Japanese
Korean
Russian
Swedish
Turkish
Chinese [Simplified]
Portuguese
< Back(B)
Do not show again
Next(N) >
Finish
Cancel
< Back(B)
Apply
Finish
Cancel
43
Changing the Input source
Source allows you to select a variety of sources and change source device names.
Source
――The screen may not display correctly if an incorrect source is selected for the source device you want to convert
You can display the screen of a source device connected to the product. Select a source from source list to display
the screen of the selected source.
――The input source can also be changed by using the SOURCE button on the remote control.
to.
SOURCE → Source
Edit Name
Source
PC
DVI
HDMI1
SOURCE → Source → TOOLS → Edit Name → ENTER E
HDMI2
DisplayPort
MagicInfo
Customise the name of a connected external device.
――The list can include the following source devices. Source devices on the list differ depending on the selected
source.
VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo
/ DHR / PC / DVI PC / DVI Devices
–– The displayed image may differ depending on the model.
44
Chapter 04
Using MDC
Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC.
For details on how to use the MDC programme, refer to Help after installing the programme. The MDC programme is available on the website.
After you press the On button following the Off button, the product checks its status for about
a minute. To run a command, try it after a minute.
6
In the displayed "Destination Folder" window, select the directory path you want to
install the programme in and click "Next".
――If the directory path is not specified, the programme will be installed in the default
MDC Programme Installation/
Uninstallation
Installation
――MDC installation can be affected by the graphics card, mother board and network
directory path.
7
install the programme in and click "Install".
8
Installation progress will be displayed.
9
Click "Finish" in the displayed "InstallShield Wizard Complete" window.
conditions.
1
Click the MDC Unified installation programme.
2
Select a language for installation. Next, click "OK".
3
When the "Welcome to the InstallShield Wizard for MDC_Unified" screen appears, click
"Next".
4
5
In the "License Agreement" window displayed, select "I accept the terms in the license
In the displayed "Ready to Install the Program" window, check the directory path to
――Select "Launch MDC Unified" and click "Finish" to run the MDC programme immediately.
10 The MDC Unified shortcut icon will be created on the desktop after installation.
――The MDC execution icon may not be displayed depending on the PC system or product
specifications.
――Press F5 if the execution icon is not displayed.
Uninstallation
agreement" and click "Next".
1
Select Settings > Control Panel on the Start menu and double-click Add/Delete Program.
In the displayed "Customer Information" window, fill out all the information fields and
2
Select MDC Unified from the list and click Change/Remove.
click "Next".
45
Connecting to MDC
Using MDC via RS-232C (serial data communications standards)
An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
Monitor 1
Monitor 2
Computer
46
Using MDC via Ethernet
Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable.
Connection using a direct LAN cable
――Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB.
Computer
Monitor 1
Monitor 2
47
Connection using a cross LAN cable
――Multiple products can be connected using the RS232C IN / OUT port on the product.
Monitor 1
Monitor 2
Computer
48
Chapter 05
Home feature
This feature is provided in Support → Go to Home.
Accessible using the HOME button on the remote control.
Video Wall
HOME
→ Video Wall → ENTER E
Video Wall
Customise the layout of multiple displays that are connected to form a video wall.
In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays.
To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the
MagicInfo function.
Video Wall
You can activate or deactivate Video Wall.
To organise a video wall, select On.
–– The displayed image may differ depending on the model.
•• Off / On
Horizontal x Vertical
This feature automatically splits a videowall display based on a videowall matrix configuration.
Enter the videowall matrix.
The videowall display is split based on the configured matrix. The number of vertical or horizontal display devices
can be set within the range 1 and 15.
――A videowall display can be split into a maximum of 225 screens.
――The Horizontal x Vertical option is only enabled when Video Wall is set to On.
49
Screen Position
To rearrange split screens, adjust the number for each product in the matrix using the Screen Position feature.
Selecting Screen Position will display the videowall matrix with the numbers assigned to the products that form
the videowall.
To change the order of a display device, change the device number and press the E button.
――A maximum of 255 displays can be arranged in Screen Position.
――The Screen Position option is only enabled when Video Wall is set to On.
――To use the function, make sure Horizontal x Vertical is configured.
Format
Select how to display images on the videowall display.
•• Full: Display images in full screen.
•• Natural: Display images in the original aspect ratio.
――The Format option is only enabled when Video Wall is set to On.
――When using Video Wall mode, a resolution of 1280x720P, 1920x1080P or 3840x2160P is recommended.
50
Picture Mode
HOME
→ Picture Mode → ENTER E
Picture Mode
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
•• Shop & Mall
Suitable for shopping malls.
–– Select either Video/Image or Text depending on the picture mode.
•• Office & School
Suitable for offices and schools.
–– Select either Video/Image or Text depending on the picture mode.
•• Terminal & Station
Suitable for bus terminals and train stations.
–– The displayed image may differ depending on the model.
–– Select either Video/Image or Text depending on the picture mode.
•• Video Wall
Suitable for environments where videowall display are used.
–– Select either Video/Image or Text depending on the picture mode.
•• Calibration
In this mode, the brightness, colour, gamma and uniformity settings customised using the colour calibration
programme Advanced Color Management are applied.
–– To apply the Calibration mode properly, make sure you configure the picture quality settings, such as
brightness, colour, gamma and uniformity, using the colour calibration programme Advanced Color
Management.
–– To download the Advanced Color Management programme, visit www.samsung.com/displaysolutions.
51
On/Off Timer
HOME
→ On/Off Timer → ENTER E
――You must set the clock before you can use Clock Set.
On Timer
Set On Timer so that your product turns on automatically at a time and on a day of your choosing.
The power is turned on with the specified volume or input source.
On/Off Timer
On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time
first.
(On Timer 1 ~ On Timer 7)
–– The displayed image may differ depending on the model.
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want On Timer to turn on your product.
–– The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use
the left and right arrow buttons to change entry fields.
•• Volume: Set the desired volume level. Use the left and right arrow buttons to change the volume level.
•• Source: Select the input source of your choice.
Off Timer
Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off Timer 7)
•• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
If you select Manual, you can choose the days you want Off Timer to turn off your product.
–– The check mark indicates days you’ve selected.
•• Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers. Use
the left and right arrow buttons to change entry fields.
52
Holiday Management
Timer will be disabled during a period specified as a holiday.
•• Add Holiday: Specify the period you want to add as a holiday.
Select the start and end dates of the holiday you want to add using the u/d buttons, and click the Save
button.
The period will be added to the list of holidays.
–– Start: Set the start date of the holiday.
–– End: Set the end date of the holiday.
――Edit: Select a holiday item and then change the date.
――Delete: Delete selected items from the list of holidays.
•• Set Applied Timer: Set the On Timer and Off Timer to not activate on public holidays.
–– Press E to select the On Timer and Off Timer settings you do not want to activate.
–– The selected On Timer and Off Timer will not activate.
53
Network Settings
View the network settings.
Network Settings
HOME
→ Network Settings→ ENTER E
IP Setting
Enter manually
IP Address
Network Settings
–– The displayed image may differ depending on the model.
***.
***.
***.
Subnet Mask
Gateway
Save
***.
***.
***.
***.
***.
***.
***
***
***
Close
•• IP Setting: Obtain automatically, Enter manually
•• IP Address: Manually enter the IP Address if IP Setting is set to Enter manually.
•• Subnet Mask: Manually enter the Subnet Mask if IP Setting is set to Enter manually.
•• Gateway: Manually enter the Gateway if IP Setting is set to Enter manually.
――When Obtain automatically is set, IP Address/Subnet Mask/Gateway information are not displayed.
54
MagicInfo Player I
HOME
Change source to MagicInfo Player I.
MagicInfo Player I publishes and plays a variety of content, including created content and multimedia content
(images, videos and audio content), from the server or a connected device.
→ MagicInfo Player I → ENTER E
MagicInfo Player I
–– The displayed image may differ depending on the model.
55
ID Settings
Assign an ID to a set.
HOME
Device ID
→ ID Settings → ENTER E
ID Settings
Press u/d to select a number, and press E.
Enter the ID number of the product connected to the input cable for input signal reception. (Range: 0~224)
――Enter the number you want using the number buttons on the remote control.
Device ID Auto Set
–– The displayed image may differ depending on the model.
――Assign ID number automatically for all connected products.
PC Connection Cable
Select a method to connect to MDC to receive the MDC signal.
•• RS232C cable
Communicate with MDC via the RS232C-stereo cable.
•• RJ45(LAN) cable
Communicate with MDC via the RJ45 cable.
56
Clone Product
Export settings on the product to an external storage device. You can also import settings from an external storage
device.
This option is useful when assigning the same settings to several products.
HOME
→ Clone Product → ENTER E
Clone Product
When a duplicate file is not found on the external storage device
1
Connect the external storage device, then run the Clone Product function.
2
The No cloning file found on the external storage device. Export this device's settings to the external storage
device? message appears.
–– The displayed image may differ depending on the model.
When a duplicate file is found on the external storage device
1
Connect the external storage device, then run the Clone Product function.
2
The Settings file found on the external storage device. Please select an option. message appears.
Run the Import from External Storage or Export to External Storage function.
–– Import from External Storage: Copy settings saved on an external storage device to the product.
–– Export to External Storage: Copy settings on the product to an external storage device.
――After configuration is complete, the product is rebooted automatically.
57
More settings
HOME
The picture settings menu appears.
→ More settings → ENTER E
More settings
–– The displayed image may differ depending on the model.
58
Chapter 06
Screen Adjustment
Configure the Picture settings (Backlight, Color Tone, etc.).
The layout of the Picture menu options may vary depending on the product.
Picture
OnScreen Display
System
Sound
?
Support
Picture Mode
Picture
Picture Mode
Office & School
Backlight
50
MENU m → Picture → Picture Mode → ENTER E
Brightness
50
Select a picture mode (Picture Mode) suitable for the environment where the product will be used.
Contrast
50
Sharpness
100
Color
50
Tint (G/R)
50
•• Shop & Mall
Suitable for shopping malls.
–– Select either Video/Image or Text depending on the picture mode.
•• Office & School
Suitable for offices and schools.
–– Select either Video/Image or Text depending on the picture mode.
–– The displayed image may differ depending on the model.
•• Terminal & Station
Suitable for bus terminals and train stations.
–– Select either Video/Image or Text depending on the picture mode.
•• Video Wall
Suitable for environments where videowall display are used.
–– Select either Video/Image or Text depending on the picture mode.
•• Calibration
In this mode, the brightness, colour, gamma and uniformity settings customised using the colour
calibration programme Advanced Color Management are applied.
–– To apply the Calibration mode properly, make sure you configure the picture quality settings, such
as brightness, colour, gamma and uniformity, using the colour calibration programme Advanced
Color Management.
–– To download the Advanced Color Management programme, visit www.samsung.com/
displaysolutions.
59
Backlight / Brightness / Contrast /
Sharpness / Color / Tint (G/R)
Your product has several options for adjusting picture quality.
Shop & Mall, Office & School,
Terminal & Station, Video Wall
MENU m → Picture → White Balance → ENTER E
Adjust the colour temperature for a more natural picture.
MENU m → Picture → ENTER E
Picture Mode
White Balance
Picture Mode
settings
•• Reset: Suitable for environments where videowall display are used.
Adjustable options
Video/Image
Backlight / Brightness / Contrast /
Sharpness / Color / Tint (G/R)
Text
Backlight / Brightness / Contrast /
Sharpness
Calibration
•• R-Gain / G-Gain / B-Gain: Adjust each colour’s (red, green, blue) brightness.
Backlight / Brightness / Contrast /
Sharpness / Color
Gamma
MENU m → Picture → Gamma → ENTER E
Adjust the primary colour intensity.
――If Picture Mode is set to Calibration, Gamma is disabled.
――When you make changes to Backlight, Brightness, Contrast, Sharpness, Color or Tint (G/R),
the OSD will be adjusted accordingly.
――You can adjust and store settings for each external device you have connected to an input
Calibrated Value
――Lowering picture brightness reduces power consumption.
MENU m → Picture → Calibrated Value → ENTER E
on the product.
Color Temperature
MENU m → Picture → Color Temperature → ENTER E
Adjust the colour temperature. (Range: 2800K–16000K)
――If Picture Mode is set to Calibration, Color Temperature is disabled.
Select whether to apply the brightness, colour, gamma and uniformity settings customised
using the colour calibration programme Advanced Color Management to the Information and
Advertisement modes.
•• Don't Apply / Apply
――To download the Advanced Color Management programme, visit
www.samsung.com/displaysolutions.
――If Picture Mode is set to Calibration, Calibrated Value is disabled.
60
Picture Options
Dynamic Backlight
Automatically adjust the backlight to provide the best possible screen contrast under the
current conditions.
MENU m → Picture → Picture Options → ENTER E
Picture Mode
Picture Mode
settings
Shop & Mall, Office & School,
Terminal & Station, Video Wall
Adjustable options
Video/Image
Color Tone / HDMI Black Level /
Dynamic Backlight / UHD COLOR
Text
Color Tone / HDMI Black Level /
Dynamic Backlight / UHD COLOR
Calibration
Dynamic Backlight / UHD COLOR
•• Off / On
――If Video Wall is set to On, Dynamic Backlight is disabled.
UHD COLOR
•• HDMI1 : Off / On
•• HDMI2 : Off / On
•• DisplayPort : Off / On
――To enable a UHD input source, set UHD COLOR to On.
――If monitors are connected through Loopout when a UHD resolution is in use, set UHD
Color Tone
COLOR to On on all monitors.
――A maximum of 25 monitors can be connected through Loopout when using UHD resolution.
If Picture Mode is set to Text.
――To use UHD COLOR mode over an HDMI cable, using an HDMI cable that is compatible with
•• Off / Cool / Standard / Warm
If Picture Mode is set to Video/Image.
•• Off / Cool / Standard / Warm1 / Warm2
――If Picture Mode is set to Calibration, Color Tone is disabled.
――Settings can be adjusted and stored for each external device connected to an input on the
HDMI 2.0 is recommended. Make sure that the cable is shorter than 2m.
――Switching UHD COLOR between On and Off takes some time.
――If the HDMI/DP connector with UHD COLOR enabled is connected to a device that does not
support UHD content, the device may not operate properly. Connect a device that supports
UHD content.
product.
HDMI Black Level
Selects the black level on the screen to adjust the screen depth.
•• Auto / Low / Normal
――This option is not available if the input source is set to PC.
61
Picture Size
Position
Adjusts the picture position.
MENU m → Picture → Picture Size → ENTER E
choose size and aspect ratio picture displayed on screen.
Picture Size
Position is only available if Picture Size is set to Screen Fit.
――Screen Fit under Picture Size is only enabled when Picture Mode is set to Videos/Images
while in DVI mode.
――To use the Position function after selecting Screen Fit, follow these steps.
Different screen adjustment options are displayed depending on the current input source.
1
Press the d button to select Position. Press the E button.
Available Picture Size options can vary depending on whether the Picture Mode is Video/
Image or Text.
2
Press the u or d button to move the picture.
3
Press the E button.
•• 16:9: Sets the picture to 16:9 wide mode.
•• Zoom1: Use for moderate magnification. Cuts off the top and sides.
•• Zoom2: Use for a stronger magnification.
•• Smart View 1: Reduces the 16:9 picture by 50%.
――Smart View 1 is enabled only in HDMI1, HDMI2 mode.
•• Smart View 2: Reduce the top and bottom margins of the 16:9 screen by 25%.
――Smart View 2 is enabled only in HDMI1, HDMI2 mode.
•• Wide: Enlarges the aspect ratio of the picture to fit the entire screen.
•• 4:3: Sets the picture to basic (4:3) mode.
――Do not set your product to 4:3 format for a long time.
Zoom/Position
Adjust the screen size and position.
This option can be configured if the input source supports 1080i or 1080p and the Picture Size
is Custom.
――Custom under Picture Size is only enabled when Picture Mode is set to Videos/Images
while in DVI mode.
――To use the Zoom/Position function after selecting Custom, follow these steps.
1
Press the d button to select Zoom/Position. Press the E button.
•• Screen Fit: Displays the full image without any cut-off when DVI, HDMI1, HDMI2 (720p /
1080i / 1080p) signals are inputted.
――Screen Fit under Picture Size is only enabled when Picture Mode is set to Videos/Images
2
Select the Zoom or Position. Press the E button.
3
Press the u/d/l/r button to move the picture.
•• Custom: Changes the resolution to suit the user's preferences.
――Custom under Picture Size is only enabled when Picture Mode is set to Videos/Images
4
Press the E button.
The borders displayed on the left and right, or top and bottom of the screen may cause
image retention (screen burn) which is not covered by the warranty.
while in DVI mode.
while in DVI mode.
•• Original: Display images in the original picture quality.
――Available ports may differ depending on the model.
――If you want to reset the picture to its original position, select Reset in the Zoom/Position
screen. The picture will be set to its default position.
62
Resolution
Picture Off
If the picture is not normal even when the resolution of the graphics card is one of the
following, you can optimise the picture quality by selecting the same resolution for the
product as the PC using this menu.
MENU m → Picture → Picture Off → ENTER E
Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x 768 / 1366 x 768
Auto Adjustment
MENU m → Picture → Auto Adjustment → ENTER E
――Available in PC mode only.
Adjust frequency values/positions and fine tune the settings automatically.
Selecting Picture Off switches off the screen. The volume is not disabled.
To switch the screen on, press any button other than the volume button.
Reset Picture
MENU m → Picture → Reset Picture → ENTER E
Resets your current picture mode to its default settings.
――If Picture Mode is set to Calibration, Reset Picture is disabled.
PC Screen Adjustment
MENU m → Picture → PC Screen Adjustment → ENTER E
――Available in PC mode only.
•• Coarse / Fine
Removes or reduces picture noise.
If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the
frequency as best as possible (Coarse) and Fine-tune again. After the noise has been
reduced, re-adjust the picture so that it is aligned with the centre of screen.
•• Position
To adjust the PC’s screen position if it is not centred or does not fit the product screen.
Press the ▲ or ▼ button to adjust the Vertical Position. Press the ◀ or ▶ button to adjust
the Horizontal Position.
•• Image Reset
Resets the image to the default settings.
63
Chapter 07
OnScreen Display
Picture
OnScreen Display
System
Sound
?
Display Orientation
OnScreen Display
Display Orientation
Screen Protection
MENU m → OnScreen Display → Display Orientation → ENTER E
Message Display
Menu Language
Reset OnScreen Display
Support
English
Onscreen Menu Orientation
Set the menu screen orientation.
•• Landscape: Display the menu in landscape mode (default).
•• Portrait: Display the menu in portrait mode on the right side of the product screen.
–– The displayed image may differ depending on the model.
Source Content Orientation
Set the orientation of content from external devices connected to the product.
•• Landscape: Display the screen in landscape mode (default).
•• Portrait: Display the screen in portrait mode.
――Portrait orientation mode is not supported when a UHD resolution is in use.
Aspect Ratio
Set the rotated screen to be either full screen or original.
•• Full Screen: Display the rotated screen in full screen.
•• Original: Display the rotated screen in the original aspect ratio.
――Available only when Source Content Orientation is set to Portrait.
64
Screen Protection
Timer
You can set the timer for Screen Protection.
MENU m → OnScreen Display → Screen Protection → ENTER E
To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn
prevention technology.
Pixel Shift moves the picture slightly on the screen.
The Pixel Shift time setting allows you to programme the time between movements of the
picture in minutes.
The Screen Protection feature stops automatically after a specified period of time.
•• Timer (Off / Repeat / Interval)
–– Off
–– Repeat: Display the anti-burn in pattern at a specified interval.
–– Interval: Display the anti-burn in pattern for a specified period of time (from the
starting to finishing time).
――When Clock Set is configured, Interval will be enabled.
――Period, Start Time and End Time are enabled only when Timer is set to Repeat or
Pixel Shift
Interval.
Minimize image retention by finely moving pixels horizontally or vertically.
•• Pixel Shift (Off / On)
――Horizontal, Vertical and Time are enabled only when Pixel Shift is set to On.
•• Horizontal: Sets how many pixels the screen moves horizontally.
•• Vertical: Sets how many pixels the screen moves vertically.
•• Time: Set the time interval for performing the horizontal or vertical movement,
respectively.
•• Start Time: Set the start time to activate the screen protection function.
――The option is enabled when Interval is selected for Timer.
•• End Time: Set the end time to deactivate the screen protection function.
――The option is enabled when Interval is selected for Timer.
Immediate Display
Available Pixel Shift Settings and Optimum Settings.
Available Settings
•• Period: Specify the time interval to activate the Screen Protection function.
――The option is enabled when Repeat is selected for Timer.
Optimum Settings
Select the screen saver you want to display immediately.
•• Off / Fading Screen
Horizontal (pixels)
0~4
4
Vertical (pixels)
0~4
4
Side Gray
Time (minute)
1 min. ~ 4 min.
4 min.
When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to
protect the screen.
――The Pixel Shift value may differ depending on the product size (inches) and mode.
――Displaying a still image or a 4:3 output for an extended period of time may cause image
•• Off / Light / Dark
retention. This is not a defect in the product.
65
Message Display
Menu Language
MENU m → OnScreen Display → Message Display → ENTERE
MENU m → OnScreen Display → Menu Language → ENTER E
Source Info
Set the menu language.
――A change to the language setting will only be applied to the onscreen menu display. It will
Select whether to display the source OSD when the input source changes.
not be applied to other functions on your PC.
•• Off / On
No Signal Message
Select whether to display the no-signal OSD when no signal is detected.
•• Off / On
MDC Message
Reset OnScreen Display
MENU m → OnScreen Display → Reset OnScreen Display → ENTER E
This option returns the current settings under OnScreen Display to the default factory
settings.
Select whether to display the MDC OSD when the product is controlled by the MDC.
•• Off / On
66
Chapter 08
System
Picture
OnScreen Display
System
Sound
?
Support
Setup
System
Setup
Time
MENU m → System → Setup → ENTER E
MagicInfo I Source
Go through the initial setup steps like you did the first time you used this product.
Auto Source Switching
Power Control
Eco Solution
Temperature Control
77
Time
MENU m → System → Time → ENTER E
–– The displayed image may differ depending on the model.
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a
specified time using the Timer function.
――Press the INFO button if you want to view the current time.
Clock Set
Select Clock Set. Select Date or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right
arrow buttons to move from one entry field to the next. Press E when done.
――You can set the Date and Time directly by pressing the number buttons on the remote control.
67
DST
Auto Source Switching
Switches the DST (Daylight Saving Time) function on or off.
Off / On
•• Start Date: Set the start date of Daylight Saving Time.
•• End Date: Set the end date of Daylight Saving Time.
•• Time Offset: Select the correct time offset your timezone.
Sleep Timer
Automatically shuts off the product after a preset period of time.
(Off / 30 min. / 60 min. / 90 min. / 120 min. / 150 min. / 180 min.)
――Use the up and down arrows to select a period of time, and then press E. To cancel Sleep
Timer, select Off.
Power On Delay
When connecting multiple products, adjust the power-on time for each product to prevent
power overload (within the range 0–50 seconds).
MagicInfo I Source
MENU m → System → MagicInfo I Source → ENTER E
――The MagicInfo I Source feature is available if a network box (sold separately) is connected.
MENU m → System → Auto Source Switching → ENTER E
Turning on the display with Auto Source Switching On, and the previous video source selection
is not active, the display will automatically search the different video input sources for active
video.
Auto Source Switching
When the Auto Source Switching is On, the display video source will automatically be searched
for active video.
The Primary Source selection will be activated, if the current video source is not recognised.
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognised, the display will perform
two searches for an active source, each search checking the primary and then secondary
source. If both searches fail, the display will return to the first video source and display a
message indicating that there is no signal.
When the Primary Source selection is set to All, the display will search all the video source
inputs twice in sequence looking for an active video source, returning back to the first video
source in the sequence if no video is found.
Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is
connected.
――The Primary Source Recovery function is disabled if Primary Source is set to All.
Pressing MagicInfo Player I on the remote control displays content connected to the network
box (sold separately).
•• DVI / DisplayPort
68
Primary Source
Standby Control
Specify Primary Source for the automatic input source.
You can set the screen standby mode to be applied when an input signal is received.
Secondary Source
Specify Secondary Source for the automatic input source.
――The Secondary Source function is disabled if Primary Source is set to All.
•• Auto
Power-saving mode will activate if no input signals are detected even though a source
device is connected to the display.
The message No Signal will appear if no source device is connected.
•• Off
The message No Signal will appear if no input signals are detected.
――If No Signal is displayed although a source device is connected, check the cable
Power Control
MENU m → System → Power Control → ENTER E
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power
button is not needed.
•• Off / On
connection.
――If No Signal Message is set to Off, the No Signal message does not appear.
If this is the case, set No Signal Message to On.
•• On
Power-saving mode will activate if no input signals are detected.
Network Standby
This feature keeps the network power on when the product turns off.
•• Off / On
PC Module Power
Power Button
The PC module can be turned on/off separately from the LFD.
The power button can be set to either turn on the power or turn on/off the power.
Synced Power-On
•• Power On Only: Set the power button to turn on the power.
•• Power On/Off: Set the power button to turn on/off the power.
To turn off the LFD without turning off the PC module, select Off.
•• Off / On
Synced Power-Off
To turn on the PC module without turning on the LFD, select Off.
•• Off / On
69
Eco Solution
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
MENU m → System → Eco Solution → ENTER E
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
•• Off / Low / Medium / High
Screen Lamp Schedule
――This option is enabled when Clock Set is configured.
•• Off / 15 min. / 30 min. / 60 min.
――Disabled when an attached PC is in power saving mode.
――The product will automatically power off at a specified time. The time can be changed as
required.
Auto Power Off
The product will automatically turn off if you don’t press a button on the remote or touch a
button on product front panel within select hours to prevent overheating.
•• Off / 4 hours / 6 hours / 8 hours
Screen Lamp Schedule
Enable or disable the lamp schedule.
•• Off / On
Temperature Control
Schedule 1, Schedule 2
MENU m → System → Temperature Control → ENTER E
Time
This function detects the internal temperature of the product. You can specify the temperature
range that is acceptable.
The panel brightness will change to the brightness set in Lamp at a specified time.
Lamp
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
•• 0 ~ 100
The default temperature is set to 77°C.
Recommended temperature for Temperature Control is 75°C~ 80°C (provided that the
surrounding temperature is 40°C).
――The screen will become darker if the current temperature exceeds the specified
temperature limit. If the temperature continues to rise, the product will power off to
prevent overheating.
70
Change PIN
MENU m → System → Change PIN → ENTER E
The Change PIN screen will appear.
Power On Button
Turn on this feature to enable the remote control's Power button to turn on the device while
Safety Lock is enabled.
•• Off / On
Choose any 4 digits for your PIN and enter it in Enter a new PIN.. Reenter the same 4 digits in
Enter the PIN again..
HDMI Hot Plug
When the Confirm screen disappears, press the OK button. The product has memorised your
new PIN.
――Default password: 0 - 0 - 0 - 0
This feature is used to activate the time delay to turn on a DVI/HDMI source device.
General
MENU m → System → General → ENTER E
•• Off / On
Frame Alignment
MENU m → System → Frame Alignment → ENTER E
This menu is designed to correct for height differences when using Video Wall.
Security
•• Auto: Activates the menu on even rows, according to the H / V / Position settings under
Video Wall.
Enter your 4 digit PIN number. The default PIN number is “0-0-0-0".
•• Off: Turns off the Frame Alignment menu.
If you want to change the PIN number, use the Enter PIN function.
•• On: Turns on the menu, irrespective of whether Video Wall is on.
Safety Lock
It sets safe lock function.
•• Off / On
All the menus and buttons of the product and remote control, except for the LOCK button on
the remote control, will be locked by the Safety Lock function.
To unlock the menus and buttons, press the LOCK button and then enter the password (default
password: 0 - 0 - 0 - 0).
Reset System
MENU m → System → Reset System → ENTER E
This option returns the current settings under system to the default factory settings.
71
Chapter 09
Sound Adjustment
Configure the sound (Sound) settings for the product.
Picture
OnScreen Display
System
HDMI Sound
Sound on Video Call
Reset Sound
Sound
?
HDMI Sound
Sound
AV(HDMI)
Current Source
MENU m → Sound → HDMI Sound → ENTER E
Select whether to hear from AV(HDMI) or PC(DVI).
•• AV(HDMI) / PC(DVI)
Support
Sound on Video Call
–– The displayed image may differ depending on the model.
MENU m → Sound → Sound on Video Call → ENTER E
Select sound output to listen to during a video call.
•• Current Source / Video Call
Reset Sound
MENU m → Sound → Reset Sound → ENTER E
The displayed image may differ depending on the model. Reset all sound settings to the factory defaults.
72
Chapter 10
Support
Software Update
Go to Home
MENU m → Support → Software Update → ENTER E
MENU m → Support → Go to Home → ENTER E
The Software Update menu lets you upgrade your product software to the latest version.
――Be careful not to turn off the power until the upgrade is complete. The product will turn off
Accessible using the HOME
and on automatically after completing the software upgrade.
button on the remote control.
Go to Home to play a variety of content from a memory device or a connected network.
――When you upgrade software, all video and audio settings you have made will return to their
default settings. We advise you to write down your settings so that you can easily reset them
after the upgrade.
Contact Samsung
Reset All
MENU m → Support → Reset All → ENTER E
This option returns all the current settings for a display to the default factory settings.
MENU m → Support → Contact Samsung → ENTER E
View this information when your product does not work properly or when you want to upgrade
the software.
You can find information regarding our call centres and how to download products and
software.
――Contact Samsung and find the product Model Code and Software Version.
73
Chapter 11
Troubleshooting Guide
Requirements Before Contacting Samsung Customer Service Centre
Before calling Samsung Customer
Service Centre, test your product
as follows. If the problem persists,
contact Samsung Customer Service
Centre.
Testing the Product
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
If the screen remains blank, check the
PC system, video controller and cable.
1
Power off both the PC and product.
2
Disconnect all the cables from the product.
3
Power on the product.
4
If No Signal is displayed, the product is operating normally.
Checking the Resolution and Frequency
Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected
(refer to Supported Resolutions).
74
Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the connection is
secure.
Blank spaces are found on all four sides of the screen when
an HDMI or HDMI-DVI cable is connected to the product
and PC.
The blank spaces found on the screen have nothing to do with the product.
Blank spaces on the screen are caused by the PC or graphics card. To resolve the problem,
adjust the screen size in the HDMI or DVI settings for the graphics card.
If the graphics card settings menu does not have an option to adjust the screen size, update
the graphics card driver to the latest version.
(Please contact the graphics card or computer manufacturer for further details about how to
adjust the screen settings.)
PC is shown in Source when a PC is not connected.
PC is always shown in Source irrespective of whether or not a PC is connected.
Screen issue
The power LED is off. The screen will not switch on.
Make sure that the power cord is connected.
No Signal is displayed on the screen.
Check that the product is connected correctly with a cable.
Check that the device connected to the product is powered on.
Not Optimum Mode is displayed.
This message is displayed when a signal from the graphics card exceeds the product's
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and set the maximum resolution and frequency
according to the product specifications.
The images on the screen look distorted.
Check the cable connection to the product.
75
Screen issue
The screen is not clear. The screen is blurry.
Adjust Coarse and Fine.
Remove any accessories (video extension cable, etc) and try again.
Set the resolution and frequency to the recommended level.
The screen appears unstable and shaky.
There are shadows or ghost images left on the screen.
Check that the resolution and frequency of the PC and graphics card are set within a range
compatible with the product. Then, change the screen settings if required by referring to the
Additional Information on the product menu and the Standard Signal Mode Table.
The screen is too bright. The screen is too dark.
Adjust Brightness and Contrast.
White does not really look white.
Go to Picture and adjust the White Balance settings.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product is in power-saving mode.
The product will turn off automatically.
Go to System and make sure Sleep Timer is set to Off.
Press any key on the keyboard or move the mouse to return to the previous screen.
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off after
10 to 15 minutes.
Picture quality of the product is different from the dealer
shop where it was purchased.
Use an HDMI cable to obtain high-definition (HD) picture quality.
76
Screen issue
The screen display does not look normal.
Encoded video content may cause the display to appear corrupted in scenes featuring fast
moving objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does
not mean the product is defective.
A cell phone within a distance of one-meter radius may cause static on analogue and digital
products.
The brightness and colour do not look normal.
Go to Picture and adjust the screen settings such as Picture Mode, Color, Brightness and
Sharpness.
Go to System and adjust the Energy Saving settings.
Reset the screen settings to the default settings.
Broken lines are displayed on the edges of the screen.
If Picture Size is set to Screen Fit, change the setting to 16:9.
Lines (red, green or blue) are displayed on the screen.
These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor.
Contact a Samsung Service Centre to resolve the issue.
The display looks unstable and then freezes.
The screen may freeze when a resolution other than the recommended resolution is used or
if the signal is not stable. To resolve the issue, change the PC resolution to the recommended
resolution.
77
Screen issue
The screen cannot be displayed in full screen.
A scaled SD (4:3) content file can cause black bars on both sides of an HD channel screen.
A video with an aspect ratio different from the product can cause black bars at the top and
bottom of the screen.
Change the screen size setting to full screen on the product or source device.
Sound issue
There is no sound.
Check the connection of the audio cable or adjust the volume.
Check the volume.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum level, adjust the volume on your
PC sound card or software programme.
Video is available but there is no sound.
If an HDMI cable is connected, check the audio output settings on the PC.
If a source device is used
•• Make sure the audio cable is properly connected to the audio input port on the product.
•• Check the audio output settings for the source device.
(For example, if an HDMI cable is connected to the monitor, the audio setting for the
cable box may need to be changed to HDMI.)
If a DVI-HDMI cable is used, a separate audio cable is required.
If the product has a headphone port, make sure nothing is connected to it.
Reconnect the power cable to the device and then reboot the device.
78
Sound issue
There is static coming from the speakers.
Check the cable connection. Make sure a video cable is not connected to an audio input port.
Check the signal strength after connecting a cable.
Low signal level can cause corrupted sound.
There is audible sound when the volume is muted.
Adjust the volume for the external speakers.
Audio settings for main speakers are separate from the internal speakers on the product.
Changing or muting the volume on the product does not affect an external amplifier(decoder).
Remote control issue
The remote control does not work.
Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
79
Other issue
The product smells like plastic.
The plastic smell is normal and disappears over time.
Audio or video cuts out intermittently.
Check the cable connection and connect it again if required.
Using a very hard or thick cable may corrupt audio and video files.
Make sure cables are flexible enough to ensure durability. When mounting the product onto a
wall, it is recommended to use right-angle cables.
Small particles are found on the edges of the product.
The particles are part of the product design. The product is not defective.
When I try to change the PC resolution, a message "Mode
not Supported" appears.
The message "Mode not Supported" appears if the input source resolution exceeds the
maximum resolution of the display.
To resolve the issue, change the PC resolution to a resolution supported on the display.
There is no sound from the speakers in HDMI mode when a
DVI-HDMI cable is connected.
DVI cables do not transmit sound data.
HDMI Black Level is not functioning properly on an HDMI
device with YCbCr output.
This function is available only when a source device, such as a DVD player and STB, is
connected to the product via an HDMI (RGB signal) cable.
There is no sound in HDMI mode.
Displayed picture colours may not look normal. Video or sound may not be available. This can
occur if a source device that only supports an older version of the HDMI standard is connected
to the product.
Make sure to connect the audio cable to the correct input jack to enable audio.
If these issues occur, connect an audio cable along with the HDMI cable.
Some PC graphics cards may not automatically recognise HDMI signals that do not include
sound. In this case, manually select a sound input.
Sound input
Screen mode
PC
Auto
PC settings
DVI PC
Audio In (Stereo ports)
PC settings
80
Other issue
HDMI-CEC does not work.
This product does not support the HDMI-CEC feature.
To use several external devices compatible with the HDMI-CEC feature that are connected
to the HDMI1 and HDMI2 ports on the product, turn off the HDMI-CEC features on all the
external devices. External devices include Blu-ray and DVD players.
Operating an external device when its HDMI-CEC feature is enabled may automatically stop
other external devices.
To change HDMI-CEC settings, refer to the device user guide or contact the device
manufacturer for assistance.
The IR sensor is not functioning.
Make sure the sensor light turns on when a button is pressed on the remote control.
•• If the sensor light does not turn on, turn the power switch off and then on again on the
back of the product.
(The power LED lights up red when the screen is switched off.)
If the sensor light still does not turn on after the power switch is turned off and then on
again, an internal jack may be disconnected.
Contact your nearest service Centre to have the product serviced.
•• If the sensor light that is on does not flash red when a button is pressed on the remote
control, the IR sensor may be defective.
Contact your nearest service Centre to have the product serviced.
•• This function is available only when a source device, such as a DVD player and STB, is
connected to the product via an HDMI (RGB signal) cable.
When booting the PC with the input source set to
DisplayPort the BIOS and booting screens do not appear.
•• Boot the PC when the set is turned on or when the input source is not DisplayPort.
81
Q&A
Question
How can I change the frequency?
Answer
Set the frequency on your graphics card.
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings →
Advanced → Monitor and adjust the frequency in Monitor Settings.
•• Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor
and adjust the frequency in Monitor Settings.
–– Refer to the user manual for your
PC or graphics card for further
instructions on adjustment.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize
→ Display Settings → Advanced Settings → Monitor and adjust the frequency in Monitor
Settings.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust
resolution → Advanced Settings → Monitor and adjust the frequency in Monitor Settings.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust resolution → Advanced Settings → Monitor and adjust the frequency in Monitor
Settings.
•• Windows 10: Go to Settings → System → Display → Advanced display settings → Display
adapter properties → Monitor, and adjust Screen refresh rate under Monitor settings.
How can I change the resolution?
•• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings and
adjust the resolution.
•• Windows ME/2000: Go to Control Panel → Display → Settings and adjust the resolution.
•• Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize →
Display Settings and adjust the resolution.
•• Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust
Resolution and adjust the resolution.
•• Windows 8: Go to Settings → Control Panel → Appearance and Personalization → Display
→ Adjust Resolution and adjust the resolution.
•• Windows 10: Go to Settings → System → Display → Advanced display settings, and adjust
the resolution.
82
Question
How do I set powersaving mode?
Answer
•• Windows XP: Set power-saving mode in Control Panel → Appearance and Themes →
Display → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows ME/2000: Set power-saving mode in Control Panel → Display → Screen Saver
Settings or BIOS SETUP on the PC.
•• Windows Vista: Set power-saving mode in Control Panel → Appearance and
Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 7: Set power-saving mode in Control Panel → Appearance and Personalization
→ Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 8: Set power-saving mode in Settings → Control Panel → Appearance and
Personalization → Personalize → Screen Saver Settings or BIOS SETUP on the PC.
•• Windows 10: Set power-saving mode in Settings → Personalization → Lock screen →
Screen timeout settings → Power & sleep or BIOS SETUP on the PC.
83
Chapter 12
Specifications
General
- Size
Model Name
Panel
- Display area
UH46F5
Size
46 CLASS (45.9 inches / 116.8 cm)
Display area
1018.4 mm (H) x 573.0 mm (V) / 40.1 inches (H) x 22.6 inches (V)
Power Supply
AC 100 to 240 VAC (+/- 10%), 60 / 50 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in different countries.
H
Environmental
considerations
V
Operating
Temperature : 0°C - 40 °C (32 °F - 104 °F)
Humidity : 10 % - 80 %, non-condensing
Storage
Temperature : -20 °C - 45 °C (-4 °F - 113 °F)
Humidity : 5 % - 95 %, non-condensing
――Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system
optimises the monitor settings. Monitor installation takes place automatically. However, you can customise the installation settings if desired.
――Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does
not affect product performance.
――This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate
measures.
――For detailed device specifications, visit the Samsung Electronics website.
84
Preset Timing Modes
――This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a
resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution
specified for your product.
――Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85 Hz, change the
vertical frequency to 60 Hz using the CDT product before you exchange it with the LCD product.
–– Horizontal Frequency
The time required to scan a single
line from the left to the right side of
the screen is called a horizontal cycle.
The reciprocal number of a horizontal
cycle is called horizontal frequency.
Horizontal frequency is measured in
kHz.
–– Vertical Frequency
The product displays a single image
multiple times per second (like a
fluorescent light) to display what
the viewer sees. The rate of a single
image being displayed repeatedly per
second is called vertical frequency
or refresh rate. Vertical frequency is
measured in Hz.
Model Name
Synchronization
Resolution
Maximum Pixel Clock
UH46F5
Horizontal Frequency
30 - 81 kHz, 30 - 134 kHz (DisplayPort), 30 - 90 kHz (HDMI)
Vertical Frequency
48 - 75 Hz, 56 - 75 Hz (DisplayPort), 24 - 75 Hz (HDMI)
Optimum resolution
1920 x 1080 @ 60 Hz
Maximum resolution
1920 x 1080 @ 60 Hz, 3840 x 2160 @ 60 Hz (HDMI1, HDMI2, DP)
148.5 MHz (Analogue, Digital), 594 MHz (Displayport, HDMI)
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal
transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings
according to the following table by referring to the graphics card user manual.
85
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 720 x 400
31.469
70.087
28.322
-/+
VESA/IBM, 640 x 480
31.469
59.940
25.175
-/-
MAC, 640 x 480
35.000
66.667
30.240
-/-
MAC, 832 x 624
49.726
74.551
57.284
-/-
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
86
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
VESA, 1366 x 768
47.712
59.790
85.500
+/-
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 x 900
60.000
60.000
108.000
+/+
VESA, 1680 x 1050
65.290
59.954
146.250
-/+
VESA, 1920 x 1080
67.500
60.000
148.500
+/+
VESA, 2560 x 1440
88.787
59.951
241.500
+/-
VESA, 3840 x 2160
133.313
59.997
533.250
+/-
CEA, 3840 x 2160
67.500
30.000
297.000
+/+
CEA, 3840 x 2160
54.000
24.000
297.000
+/+
CEA, 3840 x 2160
56.250
25.000
297.000
+/+
CEA, 3840 x 2160
112.500
50.000
594.000
+/+
87
Chapter 13
Appendix
Responsibility for the Pay Service (Cost to
Customers)
――When the service is requested, in spite of in warranty, we may charge you for a visit from a
service technician in the following cases.
Not a product defect
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
•• If a service technician gives instructions on how to use product or simply adjusts options
without disassembling product.
•• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal,
etc.)
•• If a product is reinstalled or devices are connected additionally after installing the
purchased product for the first time.
•• If a product is reinstalled to move to a different spot or to move to a different house.
•• If customer requests instructions on how to use because of another company's product.
•• If customer requests instructions on how to use the network or another company's
programme.
A Product damage caused by customer's fault
Product damage caused by customer's mishandling or wrong repair
If a product damage is caused by;
•• External impact or drop.
•• Use of supplies or separatly sold product unspecified by Samsung.
•• Repair from a person besides an engineer of outsourcing service company or partner of
Samsung Electronics Co., Ltd.
•• Remodeling or repairing the product by customer.
•• Using it with incorrect voltage or non-authorised electrical connections.
•• Not following the "cautions" in User Manual.
Others
•• If product fails by natural disaster. (lightning, fire, earthquake, flood damage, etc)
•• If consumable components are all used up. (Battery, Toner, Fluorescent lights, Head,
Vibrator, Lamp, Filter, Ribbon, etc.)
――If customer requests a service in case the product has no defect, service fee may be
charged. So please read User Manual first.
•• If customer requests software installation and setup for the product.
•• If a service technician removes/cleans dusts or foreign materials inside of the product.
•• If customer requests an installation additionally after purchasing a product through
home-shopping or online.
88
Optimum Picture Quality and Afterimage
Burn-in Prevention
Optimum Picture Quality
•• Due to the nature of the manufacturing of this product, approximately 1 pixel per million
(1ppm) may be brighter or darker on the panel. This does not affect product performance.
–– The number of sub-pixels by panel type: 6,220,800
What is afterimage burn-in?
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal
operation refers to a continuously changing video pattern. If the LCD panel displays a fixed
pattern for an extended period of time (more than 12 hours), a slight voltage difference may
occur between the electrodes in pixels that control the liquid crystals.
Such a voltage difference between electrodes increases with time and makes the liquid crystals
thinner. When this occurs, a previous image can remain on the screen when the pattern changes.
To prevent this, the accumulated voltage difference should be reduced.
――Afterimage burn-in should not occur when an LCD panel is operating in proper conditions.
Black Matrix
•• Run Auto Adjustment to improve the picture quality. If noise is still found even after auto
adjustment, adjust Coarse or Fine.
•• Leaving the screen fixed on a stationary image for an extended period of time may cause
afterimage burn-in or defective pixels.
–– Activate power-saving mode or a dynamic screen saver if you will not be using the
product for an extended period of time.
Source
Common
Electrode (ITO)
Colour-Filter
Drain
Prevention of Afterimage Burn-in
Setting the anti-screen burn-in pattern
The anti-screen burn-in pattern automatically operates in standby mode.
•• Disabling the anti-screen burn-in pattern
On the remote control, press 2 → 2 → 7 → CH
Gate
TFT
→ 0.
Pixel Electrode (ITO)
Storage
Capaccitor (Cs)
Data Bus-Line
If the remote control sensor blinks once, the pattern is disabled.
•• Enabling the anti-screen burn-in pattern
On the remote control, press 2 → 2 → 7 → CH
→ 0.
If the remote control sensor blinks twice, the pattern is enabled.
――When the screen is turned off, the anti-screen burn-in pattern will operate for two hours.
――Keeping the anti-screen burn-in pattern on requires extra power consumption.
89
Preventing afterimage burn-in
――The best way to protect the product from afterimage burn-in is switching the power off or
setting the PC or system to run a screen saver when not in use. Also, Warranty service may be
limited depending on instruction guide.
•• Powering Off, Screen Saver and Power Saving Mode
–– Power off the product for 2 hours after using it for 12 hours.
–– Go to Display Properties > Power Supply on your PC and set the product to power off as
required.
–– Using a screen saver is recommended.
It is best to use a single-colour or moving-image screen saver.
•• Regular colour Change
–– Use 2 colours
Switch between 2 colours every 30 minutes as shown above.
Type 1
Type 2
FLIGHT
TIME
FLIGHT
TIME
OZ348
20:30
OZ348
20:30
UA102
21:10
UA102
21:10
•• Avoid combinations of a text colour and background colour of contrasting brightness.
(Brightness: refers to the lightness or darkness of a colour which varies depending on the
amount of light emitted.)
――Avoid using grey as it may contribute to afterimage burn-in.
――Avoid using colours of contrasting brightness (black and white; grey).
FLIGHT : TIME
FLIGHT : TIME
OZ348 : 20:30
OZ348 : 20:30
•• Regular Text colour Change
–– Use bright colours of similar brightness.
Interval: Change text colour and background colour every 30 minutes
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
–– Move and change text every 30 minutes as shown below.
FLIGHT
: TIME
OZ348
: 20:30
[ Step 1 ]
[ Step 2 ]
FLIGHT
: TIME
OZ348
: 20:30
[ Step 3 ]
–– Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4
hours.
90
Licence
The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
91
Terminology
480i / 480p / 720p / 1080i /
1080p____ Each of the scanning
rates above refers to the number of
effective scanning lines that decides
the screen resolution. The scanning
rate may be indicated in i (interlaced)
or p (progressive), depending on the
scanning method.
- Scanning
Scanning refers to a process of
sending pixels that form an image
progressively. A larger number of
pixels will deliver a clearer and more
vivid picture.
- Progressive
In progressive scan mode, all lines
of pixels are scanned one by one
(progressively) on the screen.
- Interlaced
In interlaced scan mode, every
other line of pixels is scanned from
top to bottom first and then the
remaining lines of pixels (that were
not scanned) are scanned.
Non-interlace Mode and Interlace
Mode____ Non-interlace mode
(progressive scan) displays a
horizontal line from the top to the
bottom of a screen progressively.
Interlace mode displays the odd
number lines first and the even
number lines next. Non-interlace
mode is mainly used in monitors
as it produces screen clarity and
interlace mode is mainly used in
TVs.
Vertical Frequency____ The product
displays a single image many times
per second (like a fluorescent light
that flickers) to display an image for
a viewer to see. The rate of a single
image being displayed repeatedly
per second is called vertical
frequency or refresh rate. Vertical
frequency is measured in Hz.
E.g. 60Hz refers to a single image
being displayed 60 times in one
second.
Dot Pitch____ The screen consist of
red, green and blue dots. A shorter
distance between the dots produces
a higher resolution. Dot pitch refers
to the distance between the shortest
distance between dots of the same
colour. Dot pitch is measured in
millimetres.
Horizontal Frequency____ The
time required to scan a single line
from the left to the right side of
the screen is called a horizontal
cycle. The reciprocal number of a
horizontal cycle is called horizontal
frequency. Horizontal frequency is
measured in kHz.
Source____ Input source refers to
a video source device connected to
the product such as a camcorder or
video or DVD player.
Plug & Play____ Plug & Play is a
function that allows the automatic
exchange of information between
a monitor and PC to produce an
optimum display environment.
The product uses VESA DDC
(international standard) to execute
Plug & Play.
Resolution____ Resolution is the
number of horizontal dots (pixels)
and vertical dots (pixels) that
form a screen. It represents the
level of display detail. A higher
resolution enables more data to
be displayed on the screen and is
useful to perform multiple tasks
simultaneously.
E.g. A resolution of 1920 X 1080
consists of 1,920 horizontal pixels
(horizontal resolution) and 1,080
vertical pixels (vertical resolution).
DVD (Digital Versatile Disc)____
DVD refers to a CD-sized mass
storage disk where you can save
multimedia (audio, video or game)
applications using MPEG-2 video
compression technology.
HDMI (High Definition Multimedia
Interface)____ It is an interface that
can be connected to a digital audio
source as well as a high-definition
video source by using a single cable
without compression.
Multiple Display Control (MDC)____
MDC (Multiple Display Control) is
an application that allows multiple
display devices to be controlled
simultaneously using a PC.
Communication between a PC and
monitor takes place using RS232C
(serial data transmission) and RJ45
(LAN) cables.
92
Download PDF

advertising