Samsung | NL22B | Samsung All-in-One Transparent Display NL22B LED Benutzerhandbuch

NL22B
User Manual
The color and the appearance may differ depending on the product, and the specifications are subject to change
without prior notice to improve the performance.
BN46-00298A-02
Table of
Contents
Chapter. 1
BEFORE USING THE
PRODUCT
4
5
5
5
6
7
8
11
12
Copyright
Securing the Installation Space
Safety Precautions
Symbols
Electricity and Safety
Installation and Safety
Operation and Safety
Precautions for Using the Product
Cleaning
Chapter. 2
PREPARATION
13
13
14
15
15
16
16
18
Checking the Contents
Removing the Packaging
Checking the Components
Parts
External Sensor
Rear View
Remote Control
Product dimensions
Chapter. 3
CONNECTIONS
19
19
19
19
20
20
21
22
Using the Product
Pre-connection Checkpoints
LAN Connection
Connecting to a USB Device
Connecting the Power
Changing the Resolution
Putting in Devices for Display in the
NL22B
Playing Image or Video files from USB
Memory
Chapter. 4
SCREEN SETUP
23
23
24
25
25
Mode
Custom
Color Control
Lamp Control
Picture Reset
2
Chapter. 5
CONFIGURING THE SOUND
SETTINGS
26
27
27
28
28
Mode
Custom
Auto Volume
SRS TS XT
Sound Reset
Chapter. 6
SETUP AND RESET
29
29
29
30
30
31
32
32
32
33
33
33
34
34
35
35
36
36
36
37
37
Language
Time
Changing the Setting for Clock Set
Setting Sleep Timer
Configuring Timer1/Timer2/Timer3
Setting Holiday Management
Safety Lock
Changing Password (Change PIN)
Configuring Lock
Safety Screen
Setting Pixel Shift
Configuring Timer
Configuring Bar
Configuring Eraser
Configuring Pixel
Setting Side Grey
Power On Adjustment
Advanced Settings
Configuring Fan & Temperature
Changing the Auto Power Setting
Setting Lamp Schedule
38
38
39
Changing the OSD Display Settings
Setup Reset
Reset All
Chapter. 9
APPENDIX
45
49
Chapter. 7
TROUBLESHOOTING GUIDE
40
40
40
41
Requirements Before Contacting
Samsung Customer Service Center
Checking the Resolution and Frequency
Check the following.
Q&A
50
51
52
54
54
54
54
54
54
54
Contact SAMSUNG WORLD WIDE
Responsibility for the Pay Service
(Cost to Customers)
Correct Disposal
Optimum Picture Quality and
Afterimage Burn-in Prevention
What is afterimage burn-in?
Terminology
OSD(On Screen Display)
Gamma
Horizontal Frequency
Vertical Frequency
Resolution
Plug & Play
Chapter. 8
SPECIFICATIONS
42
43
44
General
PowerSaver
Preset Timing Modes
3
Chapter. 1
Before Using the Product
Copyright
TruSurround XT, SRS and the
symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
The contents of this manual are subject to change without notice to improve quality.
© 2012 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung
Electronics is prohibited.
The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
Microsoft® and Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
• An administration fee may be charged if either
• (a) an engineer is called out at your request and there is no defect in the product
(i.e, where you have failed to read this user manual).
• (b) you bring the unit to a repair center and there is no defect in the product
(i.e, where you have failed to read this user manual).
• The amount of such administration charge will be advised to you before any work or
home visit is carried out.
4
B efore Using the Product
Securing the Installation Space
Safety Precautions
Ensure some space around the product for ventilation. An internal temperature rise may cause
fire and damage the product. Be sure to allow the amount of space as shown below or greater
when installing the product.
The exterior may differ depending on the product.
Caution
Do not open the cover. You may suffer an electric shock.
The components inside this product must not be repaired by home users.
Contact a technician for repair.
Symbols
10 cm
10 cm
10 cm
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are
not followed.
10 cm
10 cm
Activities marked by this symbol are prohibited.
Precautions for storage
Instructions marked by this symbol must be followed.
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is
used nearby.
Contact your nearest Samsung Customer Service Center if you want to clean the inside of
the product (Service fee will be charged.)
5
B efore Using the Product
Electricity and Safety
Do not bend or pull the power cable with force. Also, do not place a heavy
object on the power cable.
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
-- Damage to the cord may result in a fire or electric shock.
Warning
Do not place the power cable or product near heat sources.
-- A fire or electric shock may result.
Do not use a damaged power cable or plug, or a loose power socket.
-- An electric shock or fire may result.
Caution
Do not use multiple products with a single power socket.
Do not disconnect the power cable while the product is being used.
-- Otherwise, the socket may cause a fire.
-- The product may become damaged by an electric shock.
Do not touch the power cable with wet hands.
Otherwise, an electric shock may result.
Only use the power cable provided with your product by Samsung. Do not
use the power cord with other products.
!
Insert the power cable all the way in so it is not loose.
Keep the power socket where the power cable is connected unobstructed.
-- An unsecure connection may cause a fire.
!
!
!
-- A fire or electric shock may result.
-- In the event of a problem with the product, you must disconnect the
power cable to cut the power supply to the product.
Be sure to plug the power cable into a grounded power socket. (type 1
insulated devices only).
Hold the plug when disconnecting the power cable from the power socket.
-- An electric shock or injury may result.
-- A fire or electric shock may result.
!
Clean any dust around the pins of the power cable or the power outlet
using a dry cloth.
!
-- A fire may result.
6
B efore Using the Product
Installation and Safety
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Do not expose the product to direct sunlight, heat, or a hot object such as
a stove.
The product lifespan may be reduced or a fire may result.
Warning
DO NOT PLACE CANDLES,INSEC T REPELLAN TS OR CIGARETTES ON TOP
OF TH E PR ODUCT.DO NOT I NSTALL THE PRO DUCT NEAR HEAT SO URC
ES .
Do not install the product within the reach of young children.
The product may fall and injure children.
-- A fire may resullt.
Do not install the product in poorly ventilated spaces such as a bookcase or
closet.
Edible oil, such as soybean oil, can damage or deform the product. Do not
install the product in a kitchen or near a kitchen counter.
-- An increased internal temperature may cause a fire.
Keep the plastic packaging out of the reach of children.
-- Children may suffocate.
!
Do not install the product on an unstable or vibrating surface (insecure
shelf, sloped surface, etc.)
-- The product may fall and become damaged and/or cause an injury.
-- Using the product in an area with excess vibration may damage the
product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture
(water drips, etc.), oil, or smoke.
!
-- A fire or electric shock may result.
7
B efore Using the Product
Operation and Safety
Caution
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
When installing the product on a cabinet or shelf, make sure that the
bottom edge of the front of the product is not protruding.
-- The product may fall and break or cause a personal injury.
-- Install the product only on cabinets or shelves of the right size.
SAMSUNG
!
Warning
There is a high voltage inside the product. Never disassemble, repair or
modify the product yourself.
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport
or train station where the product should operate continuously for an
extended period of time) may seriously affect its performance.
-- A fire or electric shock may result.
-- Contact Samsung Customer Service Center for repairs.
-- Be sure to consult Samsung Customer Service Center if you want to
install the product at such a place.
Be careful not to drop the product when moving it. Place the product down
gently and carefully.
!
Before moving the product, turn off the power switch and disconnect the
power cable and all other connected cables.
!
-- Product failure or personal injury may result.
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cable immediately and contact Samsung Customer
Service Center.
Do not set down the product on its front.
-- The screen may become damaged.
-- Damage to the cord may result in a fire or electric shock.
!
-- An electric shock or fire may result.
If there is a thunderstorm or lightning strike, turn off the power and
disconnect the power cable.
!
-- A fire or electric shock may result.
If the product is dropped or the outer case is damaged, turn off the power
switch and disconnect the power cable. Then contact Samsung Customer
Service Center.
-- Continued use can result in a fire or electric shock.
Do not pull on the product holding only the power cable or any other cable.
-- Product failure, an electric shock or fire may result from a damaged
cable.
8
B efore Using the Product
Do not lift or move the product by pulling the power cable or any cable.
Ensure the vents are not blocked by tablecloths or curtains.
-- Product failure, an electric shock or fire may result from a damaged
cable.
-- An increased internal temperature may cause a fire.
Do not drop objects on the product or apply impact.
100
-- A fire or electric shock may result.
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects
that burn easily (paper, matches, etc) into the product (via the vent or
input/output ports, etc).
Do not let children hang from the product or climb on top of it.
-- Be sure to power off the product and disconnect the power cable when
water or other foreign substances have entered the product. Then
contact Samsung Customer Service Center.
-- Children may become injured or seriously harmed.
-- Product failure, an electric shock or fire may result.
!
Caution
Leaving the screen fixed on a stationary image for an extended period of
time may cause afterimage burn-in or defective pixels.
Do not leave heavy objects or items that children like (toys, sweets, etc.)
on top of the product.
-- The product or heavy objects may fall as children try to reach for the
toys or sweets resulting in a serious injury.
-_-
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
-- Be sure to power off the product and disconnect the power cable when
water or other foreign substances have entered the product. Then
contact Samsung Customer Service Center.
!
!
GAS
!
-- Dust accumulation combined with heat can cause a fire, electric shock
or electric leakage.
-- Your eyesight may deteriorate.
!
-- Sparks can cause an explosion or fire.
Do not use or keep combustible spray or an inflammable substance near
the product.
Disconnect the power cable from the power socket when not using the
product for an extended period of time (vacation, etc.).
Use the product at the recommended resolution and frequency.
-- Product failure, an electric shock or fire may result.
If a gas leakage is found, do not touch the product or power cable. Also,
ventilate the area immediately.
-- If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
!
Looking at the screen too close for an extended period of time can
deteriorate your eyesight.
!
-- An explosion or fire may result.
9
B efore Using the Product
The batteries (and rechargeable batteries) are not ordinary refuse and
must be returned for recycling purposes. The customer is responsible for
returning the used or rechargeable batteries for recycling.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
-- Eye fatigue will be relieved.
!
!
The front of the product may get hot when turned on for a long period of
time. Take extra caution.
-- The customer can return used or rechargeable batteries to a nearby
public recycling center or to a store selling the same type of the battery
or rechargeable battery.
Store small accessories out of the reach of children.
!
Do not place heavy objects on the product.
-- Product failure or personal injury may result.
Be careful that children do not place the battery in their mouths when
removed from the remote control. Place the battery in a location that
children or infants cannot reach.
If children have had the battery in their mouths, consult your doctor
immediately.
When replacing the battery, insert it with the right polarity (+, -).
!
-- Otherwise, the battery may become damaged or it may cause fire,
personal injury or damage due to leakage of the internal liquid.
Use only the specified standardized batteries, and do not use a new battery
and a used battery at the same time.
Otherwise, the batteries may be damaged or cause fire, personal injury or
damage due to a leakage of the internal liquid.
10
B efore Using the Product
Precautions for Using the Product
Do not expose the product to food or any sort of wet materials, liquids or
sharp objects.
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Do not move the product with an object inside.
Do not put an animal or plant in the product.
-- The object may get damaged.
!
Do not move the product with the door open with an object inside.
-- The object may fall and get damaged.
!
When moving the product, be careful to ensure the product does not bump
into any object.
!
-- A large portion of the product surface is made of glass. The glass is
fragile and susceptible to breaking if care is not taken.
Open or close the product door with caution. Body parts may get caught by
the door causing injury.
!
Objects in the product may get hot due to the built-in LED when the
product is turned on for a long period of time. Take extra caution.
Note that there is risk of deformation and discoloration to an object placed
inside the product for display for an extended period of time. This may
occur due to light and heat from the LED source.
11
B efore Using the Product
Cleaning
The following images are for reference only. Real-life situations may differ from what is
shown in the images.
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the product.
2. Remove the power cable from the product.
NOTE
Hold the power cable by the plug and do not touch the cable with wet hands.
Otherwise, an electric shock may result.
3. Wipe the product screen using a clean, soft and dry cloth.
!
-- Do not use detergents that contain alcohol, solvent or surface-active
agents.
-- Do not spray water or detergent directly on the product.
4. To clean the exterior of the product, use a moist soft cloth and wring
thoroughly before wiping the exterior.
5. After cleaning the product, connect the power cable to the product.
6. Power on the product to use it.
12
Chapter. 2
Preparation
Checking the Contents
2. Using the grooves in the box, lift and remove the top of the box.
1
2
Removing the Packaging
The appearance of the actual product may differ from the images shown.
1. Remove the black locking device at the bottom of the box.
1
2
3
3
4
5
3. Check the components and remove the styrofoam and plastic bag.
NOTE
• The appearance of the actual product may differ from the image shown.
• This image is for reference only.
13
Preparation
Checking the Components
Contact the vendor where you purchased the product if any components are missing.
The appearance of the components and items sold separately may differ from the image
shown.
Components
NOTE
Components may vary depending on the country.
Quick setup guide
Warranty card
(Not available in some
locations)
User manual
MagicInfo Software
DVD
+
-
4. Store the box in a dry area so that it can be used when moving the product in the future.
+
Power cable
Remote Control
Batteries
(Not available in
some locations)
Keys
Items sold separately
LAN cable
USB keyboard
USB mouse
USB cable
14
Preparation
Parts
5
POWER
Power on or off the product.
6
Air vent
-
External Sensor
• The external sensor consists of a remote control sensor, light sensor, and function keys.
• The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
6
SOURCE
POWER
Icons
Description
Aim the remote control towards this spot on the LCD Display.
NOTE
1
Remote-control
sensor
2
Brightness sensor
Automatically detects the intensity of ambient light around a selected
display and adjusts the screen brightness.
3
Power lamp
Turns on in power-on mode and blinks green in power-saving mode.
4
SOURCE
Using other display devices in the same space as the remote control
of this product can cause the other display devices to be inadvertently
controlled.
Not enabled on this product
15
Preparation
Rear View
Remote Control
The color and shape of parts may differ from what is shown. Specifications are subject to
change without notice to improve quality.
NOTE
• Using other display devices in the same space as the remote control of this product can cause the other
display devices to be inadvertently controlled.
• Remote control button functions may differ for different products.
Power on the product.
Power off the product.
Not available.
Enter the password in the OSD menu,
or change the channel.
Not available.
Not available.
Mute the sound.
Unmuting the sound: Press MUTE again or
press the volume control (+ VOL -) button.
USB3.0
USB2.0
LAN
Service
POWER S/W
POWER IN
Adjust the volume.
Port
About ports
Not available.
Not available.
USB 3.0, USB 2.0
Connect to a USB device such as a keyboard, mouse or speaker.
Not available.
Display or hide the onscreen display menu,
or return to the previous menu.
Not available.
Not available.
Display information on the screen.
Move to the upper, lower, left or right
menu, or adjust an option's setting.
Activates a highlighted menu item.
Exit the current menu.
LAN
Service
POWER S/W
POWER IN
Connect to a network using a LAN cable.
Dedicated to service technicians.
Return to the previous menu.
Not available.
Not available.
It sets safe lock function.
Not available.
Power switch
Not available.
Power port
16
Preparation
Adjusting the OSD with the Remote Control
Open the OSD menu.
Remote Control Reception Range
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30°
from the left and right.
Select from Picture, Sound, Setup in the displayed OSD menu
screen.
Change settings as desired.
Finish setting.
30˚
7m ~ 10m
30˚
Close the onscreen display (OSD) menu.
To place batteries in the remote control:
NOTE
• Keep used batteries out of the reach of children while they are waiting to be collected and disposed of.
• Do not use a new and used battery together. Replace both batteries at the same time.
• Remove batteries when the remote control is not to be used for an extended period of time.
1
2
3
NOTE
When purchasing a new remote control, batteries are not included.
17
Preparation
Product dimensions
417.4
398.7
388.9
298.0
476.0
34.8
444.0
34.8
359.2
513.6
27.7
35.3
61.6
253.0
61.7
6.1
376.5
NOTE
• Dimensions are subject to change without notice.
• Refer to the dimensions prior to performing installation of your product. Not responsible for typographical
or printed errors.
18
Chapter. 3
Connections
Using the Product
Connecting to a USB Device
Pre-connection Checkpoints
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
LAN Connection
USB3.0 USB2.0
1. Connect a USB device, such as a keyboard, mouse or speaker, to [USB] at the back.
NOTE
To detect and start a source device faster, connect the device to the blue USB 3.0 port on the product.
LAN
1. Connect the [LAN] port at the back of the product to a LAN using the LAN cable.
NOTE
Use Cat 5 or 6 (STP Type*) cable for the connection. (*Shielded Twisted Pair)
19
Connections
Connecting the Power
Changing the Resolution
NOTE
• Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality.
• The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Go to Control Panel
POWER S/W
→ Display → Screen Resolution and change the resolution.
POWER IN
1. Connect the power cord to the product and a power socket.
20
Connections
Putting in Devices for Display in the NL22B
NOTE
3
4
• Door open angle: ≤ 100˚
• Take extra care to ensure you do not open the door at an angle more than 100 degrees by force.
The product may deform.
• Maximum live load of the display panel: less than 20kg (15kg or lower recommended)
• If you place a bulky object inside the product, the light source may be blocked causing the inside and
screen of the product to be dark.
• The key is only provided to open or close the door. It is not intended to prevent theft.
This applies to all products.
1
2
3
Put in a device or accessories to display in
the product.
4
Close the door at the back.
5
1
Insert the key into the slot and turn the
key in the direction of the arrow as shown
in the image.
2
Open the door at the back of the
product in the direction of the arrow.
5 Turn the key in the direction of the arrow.
21
Connections
Playing Image or Video files from USB
Memory
MagicInfo-i Premium is enabled by default on this product. Image or video files play
automatically from a USB memory device connected.
Refer to the provided DVD for further details on using MagicInfo-i Premium Edition.
Create a MagicInfoSlide folder as a root folder on the USB memory.
E.g. G:\MagicInfoSlide
1. Copy the files you want to play to the MagicInfoSlide folder.
2. Connect the USB memory to the USB port on the product.
3. The files under the MagicInfoSlide folder play automatically in sequence.
To disable auto playback mode, click the MagicInfo-i icon [
“Select Later.”
] on the desktop and select
NOTE
• After a USB memory device is connected, the files in the USB memory are copied to the hard disk of the
product before playing. As a result, there may be a slight delay when the files play.
(Save directory:D:\Repository\Contents\MagicInfoSlide)
• Files on the hard disk are copied over with more up-to-date files on a connected USB memory each time
the USB memory device is connected.
• Content files copied and saved to the hard disk automatically play immediately after the product is
turned off and on again. To play content that was stopped by pressing the ESC button, click "Run" on
MpAgent( ) in the Windows taskbar.
• To disable the function that automatically copies files to the hard disk, go to
<Configuration - Advanced - Schedule - Removable Disk> in MagicInfo-i Premium Client and
select <Play directly from a removable disk>.
22
Chapter. 4
Screen Setup
Mode
Custom
Configure the Picture settings (Brightness, Tint, etc.).
Customize the displayed colors on the screen as desired.
The layout of the Picture menu options may vary depending on the product.
If you adjust screen using Custom function, Mode will turn to Custom mode.
Configuring Mode
Configuring Custom
1. Press [m] on the product.
2. Move to Picture using the [
NOTE
] buttons. Next, press the [
3. Move to Mode using the [
] buttons. Next, press the [
The following screen will appear.
] button.
] button.
Move
: Information
Advertisement
Custom
: 100
Enter
] buttons. Next, press the [
] button.
] button.
Custom
Contrast
Brightness
Sharpness
100
100
40
Return
• Information: This mode reduces eye fatigue and is suitable for displaying information to the public.
• Advertisement: This mode is suitable for displaying video content and indoor/outdoor advertisements.
• Custom: Customize the screen settings as desired.
4. Configure the settings as required using the [
2. Move to Picture using the [
3. Move to Custom using the [
] buttons. Next, press the [
The following screen will appear.
Picture
Mode
Custom
Color Control
Lamp Control
Picture Reset
1. Press [m] on the product.
Move
Enter
Return
4. Adjust the Contrast, Brightness, and Sharpness settings using the [
] buttons.
] buttons.
23
Screen Setup
Color Control
Contrast: Adjusts the Contrast.
Contrast
100
Adjusts individual Red, Green, Blue color balance. (Range: 0~100)
A higher value will increase the intensity of the color.
Brightness: You can adjust the general brightness of the picture.
Configuring Color Control
Brightness
100
1. Press [m] on the product.
2. Move to Picture using the [
Sharpness: Adjusts the Sharpness.
] buttons. Next, press the [
3. Move to Color Control using the [
The following screen will appear.
Sharpness
] button.
] buttons. Next, press the [
40
] button.
Color Control
Red
Green
Blue
50
50
50
Move
4. Adjust the Color Control setting using the [
Enter
Return
] buttons.
24
Screen Setup
Lamp Control
Picture Reset
Lamp Control is used to adjust the backlight to reduce power consumption.
Reset the screen settings.
Changing the Lamp Control Setting
Restoring the default settings
(Picture Reset)
1. Press [m] on the product.
2. Move to Picture using the [
] buttons. Next, press the [
3. Move to Lamp Control using the [
The following screen will appear.
] button.
] buttons. Next, press the [
2. Move to Picture using the [
] buttons. Next, press the [
3. Move to Picture Reset using the [
The following screen will appear.
Lamp Control
4. Adjust the Lamp Control setting using the [
] button.
1. Press [m] on the product.
] button.
] buttons. Next, press the [
100
] button.
Picture
Mode
: Information
Custom
Color Control
Lamp Control
Reset picture settings?
Picture Reset
] buttons.
Yes
Move
4. Press [
No
Enter
Return
] to move to the option you want and press [
].
5. The selected option will be applied.
25
Chapter. 5
Configuring the Sound Settings
Mode
• Standard: Provides sound suitable for any type of content.
• Music: Provides sound close to the original experience.
• Movie: Provides a grand sound experience.
• Speech: Hear voices clearly.
Configure the sound settings for the product.
Select a sound mode according to the type of audio you are listening to such as music,
movies, and news.
• Custom: Selects Custom if you want to adjust the settings according to your personal preferences.
4. Configure the settings as required using the [
] buttons.
5. The selected option will be applied.
Configuring Mode
1. Press [m] on the product.
2. Move to Sound using the [
] buttons. Next, press the [
3. Move to Mode using the [
] buttons. Next, press the [
The following screen will appear.
] button.
] button.
Sound
Mode
Custom
Auto Volume
SRS TS XT
Sound Reset
Move
: Standard
Music
: Movie
: Speech
Custom
Enter
Return
26
Configuring the Sound Settings
Custom
Auto Volume
The sound settings can be adjusted to suit your personal preferences.
The volume of audio input may vary depending on the channel. This option automatically
equalizes audio input from all channels.
NOTE
• You can hear the sound even when sound value is set to 0.
• If you adjust sound using Custom function, Mode will turn to Custom mode.
1. Press [m] on the product.
Configuring Custom
2. Move to Sound using the [
1. Press [m] on the product.
2. Move to Sound using the [
Configuring Auto Volume
] buttons. Next, press the [
3. Move to Custom using the [
] buttons. Next, press the [
The following screen will appear.
] button.
3. Move to Auto Volume using the [
The following screen will appear.
Move
4. Press [
Move
Enter
Return
4. Adjust the Bass, Treble, and Balance settings using the [
] button.
Sound
Mode
Custom
Auto Volume
SRS TS XT
Sound Reset
50
50
R 50
L 50
] button.
] buttons. Next, press the [
] button.
Custom
Bass
Treble
Balance
] buttons. Next, press the [
: Custom
: Off
: On
Enter
Return
] to move to the option you want and press [
].
5. The selected option will be applied.
] buttons.
• Bass: Emphasizes low frequency audio.
• Treble: Emphasizes high frequency audio.
• Balance: Allows you to Adjusts the sound balance between the left and right speakers.
5. The selected option will be applied.
27
Configuring the Sound Settings
SRS TS XT
Sound Reset
SRS TS XT allows you to enjoy the grand and vivid sound quality of 5.1-channel speakers
using two speakers. TruSurround XT delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully
compatible with all multichannel formats.
Return the sound settings to the default factory settings.
1. Press [m] on the product.
Configuring SRS TS XT
2. Move to Sound using the [
1. Press [m] on the product.
2. Move to Sound using the [
Restoring the default settings (Sound Reset)
] buttons. Next, press the [
] button.
3. Move to SRS TS XT using the [
] buttons. Next, press the [
The following screen will appear.
3. Move to Sound Reset using the [
The following screen will appear.
] buttons. Next, press the [
Yes
: Custom
No
: Off
: Off
: On
4. Press [
4. Press [
] button.
Mode
: Custom
Custom
Auto VolumeVolume
: Off
SRS TS XTReset sound settings?
: Off
Sound Reset
Move
Move
] button.
Sound
] button.
Sound
Mode
Custom
Auto Volume
SRS TS XT
Sound Reset
] buttons. Next, press the [
Enter
Return
] to move to the option you want and press [
Enter
Return
] to move to the option you want and press [
].
5. The selected option will be applied.
].
5. The selected option will be applied.
28
Chapter. 6
Setup and Reset
Language
Time
• Set the menu language.
Clock Set, Sleep Timer, Timer1 / Timer2 / Timer3, and Holiday Management can be set.
• It will not be applied to other functions on your PC.
NOTE
A change to the language setting will only be applied to the onscreen menu display.
1. Press [m] on the product.
Configuring Language
2. Move to Setup using the [
3. Move to Time using the [
1. Press [m] on the product.
2. Move to Setup using the [
Changing the Setting for Clock Set
] buttons. Next, press the [
] button.
3. Move to Language using the [
] buttons. Next, press the [
The following screen will appear.
] buttons. Next, press the [
] buttons. Next, press the [
Time
Safety Lock
Safety Screen
Power On Adjustment
Advanced Settings
Setup Reset
: English
Deutsch
Español
Français
Italiano
Svenska
Русский
Português
] button.
4. Press [
Enter
] button.
Clock Set
Month
Day
--
--
----
Hour
Minute
am/pm
--
--
--
Move
Year
Enter
Return
Clock Set: Set the current date and time.
Reset All
Move
] button.
4. Move to Clock Set using the [
] buttons. Next, press the [
The following screen will appear.
Setup
Language
] button.
Return
] to move to the option you want and press [
].
5. Configure the settings as required using the [
] buttons.
5. The selected option will be applied.
29
Setup and Reset
Setting Sleep Timer
Configuring Timer1/Timer2/Timer3
1. Press [m] on the product.
1. Press [m] on the product.
2. Move to Setup using the [
3. Move to Time using the [
] buttons. Next, press the [
] buttons. Next, press the [
4. Move to Sleep Timer using the [
The following screen will appear.
] button.
] button.
] buttons. Next, press the [
] button.
2. Move to Setup using the [
3. Move to Time using the [
] buttons. Next, press the [
] buttons. Next, press the [
--:--am
Sleep Timer
Off
: 해제
30
: 해제
60
: 해제
90
: 해제
120
150
180
Timer1
Timer2
Timer3
Holiday Management
Move
Enter
] button.
Timer1
On Time
12
00
am
Inactivated
Off Time
12
00
am
Inactivated
Volume
10
Repeat
Once
Return
Source
MagicInfo
Move
Enter
• On Time
5. Press [
• Volume: Specify the volume when the product turns on.
] to move to the option you want and press [
].
Holiday
Don't Apply
Sun Mon Tue Wed Thu Fri Sat
• Sleep Timer: Set the product to automatically turn off after a specified period of time.
(30 min / 60 min / 90 min / 120 min / 150 min /180 min / Off)
6. The selected option will be applied.
] button.
4. Move to Timer1 using the [
] buttons. Next, press the [
The following screen will appear.
Time
Clock Set
] button.
Return
• Off Time
• Source: Select an input source.
• Holiday: Select Apply to disable the timer on holidays and Don’t Apply to enable the timer on holidays.
• Repeat: Available selections include Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, and Manual.
◦◦ Once: The Timer goes off only once.
◦◦ EveryDay: The Timer repeats daily.
◦◦ Mon~Fri: The Timer repeats from Monday through Friday.
◦◦ Mon~Sat: The Timer repeats from Monday through Saturday.
◦◦ Sat~Sun: The Timer goes off on Saturday and Sunday.
◦◦ Manual: Select a day of the week you want the Timer to go off.
30
Setup and Reset
Setting Holiday Management
NOTE
• Only enabled when the clock is set using the Clock Set menu.
1. Press [m] on the product.
• The Manual option allows you to select a day of the week.
5. Press [
] to move to the option you want and press [
6. The selected option will be applied.
].
2. Move to Setup using the [
3. Move to Time using the [
] buttons. Next, press the [
] button.
] buttons. Next, press the [
4. Move to Holiday Management using the [
The following screen will appear.
] button.
] buttons. Next, press the [
] button.
Holiday Management
01/01
Add
Delete Selected
Delete All
Move
Return
• Add: You can specify holidays.
• Delete Selected: You can delete selected holidays.
NOTE
• Only enabled when registered holidays are selected.
• More than one holiday can be selected and deleted.
• Delete All: You can delete all the registered holidays.
5. Press [
] to move to the option you want and press [
].
6. The selected option will be applied.
31
Setup and Reset
Configuring Lock
Safety Lock
1. Press [m] on the product.
The password input screen appears. Enter the 4-digit password.
2. Move to Setup using the [
The default password is “0-0-0-0.”
3. Move to Safety Lock using the [
Changing Password (Change PIN)
] button.
] buttons. Next, press the [
4. Move to Lock using the [
] buttons. Next, press the [
The following screen will appear.
1. Press [m] on the product.
2. Move to Setup using the [
] buttons. Next, press the [
] button.
] button.
Lock On
] buttons. Next, press the [
3. Move to Safety Lock using the [
The following screen will appear.
] button.
] buttons. Next, press the [
Enter PIN
] button.
0 .. 9 Enter PIN
Return
Change PIN
Lock: Enable safety lock mode.
NOTE
Enter PIN
• If Lock is selected, the Lock On screen is displayed when a button on the remote control or external
sensor is pressed.
0 .. 9 Enter PIN
Return
• If you select Lock , the Lock mode activates. To disable the Lock mode, enter the password for Lock Off.
Change PIN: Change your password. Enter a new 4-digit password and then enter the new
password again. The password will be changed.
NOTE
If you forgot your password, press the remote buttons INFO → EXIT → MUTE to reset the password to
“0000.”
32
Setup and Reset
Configuring Timer
Safety Screen
The screen protection feature allows you to prevent image retention on the screen when a
stationary image is displayed on the product screen for a long period of time.
1. Press [m] on the product.
2. Move to Setup using the [
] buttons. Next, press the [
3. Move to Safety Screen using the [
Setting Pixel Shift
2. Move to Setup using the [
] buttons. Next, press the [
4. Move to Timer using the [
] buttons. Next, press the [
The following screen will appear.
1. Press [m] on the product.
] button.
] button.
] button.
Timer
] buttons. Next, press the [
3. Move to Safety Screen using the [
] button.
] buttons. Next, press the [
4. Move to Pixel Shift using the [
] buttons. Next, press the [
The following screen will appear.
] button.
: Off
해제
Horizontal
: On
4
Vertical
:4
Time
: 4 min
Off
: 동작
Mode
: On
Period
: 1 Hour
Time
: 10 sec
] button.
Move
Pixel Shift
Pixel Shift
Timer
Enter
Return
• Timer: You can set the timer for Screen Burn Protection.
The image retention elimination mode automatically deactivates after a specified period of time.
• Mode: You can change the Safety Screen Type.
Bar / Eraser / Pixel
• Period: Use this function to set the execution period for each mode set in the timer.
Move
Enter
Return
• Pixel Shift: To prevent after-images on the screen, you can use this function to have pixels move on the
LCD in the Horizontal or Vertical direction.
• Time: Within the set period of time specify a time for execution.
10 sec / 20 sec / 30 sec / 40 sec / 50 sec
5. Configure the settings as required using the [
] buttons.
• Horizontal: Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4.
• Vertical: Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4.
• Time: Set the time interval for performing the horizontal or vertical movement, respectively.
5. Configure the settings as required using the [
] buttons.
33
Setup and Reset
Configuring Bar
Configuring Eraser
1. Press [m] on the product.
1. Press [m] on the product.
2. Move to Setup using the [
] buttons. Next, press the [
3. Move to Safety Screen using the [
] button.
] buttons. Next, press the [
4. Move to Bar using the [
] buttons. Next, press the [
The following screen will appear.
] button.
] button.
Bar: This function prevents after-images on the screen by moving long black and white vertical
lines.
2. Move to Setup using the [
] buttons. Next, press the [
3. Move to Safety Screen using the [
] button.
] buttons. Next, press the [
4. Move to Eraser using the [
] buttons. Next, press the [
The following screen will appear.
] button.
] button.
Eraser: This function prevents after-images on the screen by moving a rectangular pattern.
5. The selected option will be applied.
5. The selected option will be applied.
34
Setup and Reset
Configuring Pixel
Setting Side Grey
1. Press [m] on the product.
1. Press [m] on the product.
2. Move to Setup using the [
] buttons. Next, press the [
3. Move to Safety Screen using the [
] button.
] buttons. Next, press the [
4. Move to Pixel using the [
] buttons. Next, press the [
The following screen will appear.
] button.
] button.
2. Move to Setup using the [
] buttons. Next, press the [
3. Move to Safety Screen using the [
] button.
] buttons. Next, press the [
4. Move to Side Gray using the [
] buttons. Next, press the [
The following screen will appear.
] button.
] button.
Safety Screen
Pixel Shift
Timer
Bar
Eraser
Pixel
Side Gray
: Off
Light
Dark
Move
Enter
Return
Pixel: This function prevents after-images by moving many pixels on the screen.
Side Gray: Select the brightness of the grey color for blank parts on the screen.
5. The selected option will be applied.
5. The selected option will be applied.
35
Setup and Reset
Power On Adjustment
Advanced Settings
You can set the warm-up time for the screen to turn on after the power button is pressed.
(Range: 0 – 50 seconds)
Configures the settings more elaborately.
Configuring Fan & Temperature
NOTE
A warm-up time that is too short may damage the product due to overvoltage.
1. Press [m] on the product.
Setting Power On Adjustment
2. Move to Setup using the [
3. Move to Advanced Settings using the [
1. Press [m] on the product.
2. Move to Setup using the [
] buttons. Next, press the [
3. Move to Power On Adjustment using the [
The following screen will appear.
] buttons. Next, press the [
4. Move to Fan & Temperature using the [
The following screen will appear.
] button.
] buttons. Next, press the [
] button.
] buttons. Next, press the [
] buttons. Next, press the [
] button.
] button.
Fan & Temperature
Power On Adjustment
Power On Adjustment :
] button.
0
Fan Control
: Manual
Fan Speed Setting
:3
Temperature Control
: 77
Current Temperature
Move
: 60
Enter
Return
• Fan Control: Selects auto or manual for the fan speed settings.
Adjust
4. Adjust the Power On Adjustment setting using the [
Return
] buttons.
• Fan Speed Setting: Sets the fan speed within a range of 0 and 100.
• Temperature Control: Detects the product's internal temperature and specifies the desired temperature.
The product is set to 77 °C by default.
NOTE
• The picture will be dimmed if the temperature exceeds the specified temperature, and the product
will automatically power off to prevent overheating if the temperature keeps rising.
• It is best to use the product at temperatures 75 - 80 °C (based on ambient temperature of 40 °C).
• Refer to "Specifications" herein for details about operating conditions.
• Current Temperature: Shows the current temperature of the product.
5. Set the temperatures using the [
] buttons.
36
Setup and Reset
Changing the Auto Power Setting
Setting Lamp Schedule
1. Press [m] on the product.
1. Press [m] on the product.
2. Move to Setup using the [
] buttons. Next, press the [
3. Move to Advanced Settings using the [
4. Move to Auto Power using the [
The following screen will appear.
2. Move to Setup using the [
] button.
] buttons. Next, press the [
] buttons. Next, press the [
] button.
] button.
] buttons. Next, press the [
3. Move to Advanced Settings using the [
4. Move to Lamp Schedule using the [
The following screen will appear.
] buttons. Next, press the [
] buttons. Next, press the [
Lamp Schedule
Lamp Schedule
: Off
Hour
On
OSD Display
Move
Enter
NOTE
] button.
: Off
▶
Minute am/pm Lamp
Schedule1
12
00
am
100
Schedule2
12
00
am
100
Return
Auto Power: Set the product to automatically power on.
] button.
Lamp Schedule
Advanced Settings
Fan & Temperature
Auto Power
] button.
Enter
Return
Lamp Schedule: Adjusts the luminance to a user-specified value at a specified time.
NOTE
When Auto Power is On, the product will power on automatically as soon as it is connected to power.
Only enabled when the clock is set using the Clock Set menu.
5. Adjust the Auto Power setting using the [
5. Adjust the Lamp Schedule setting using the [
] buttons.
] buttons.
37
Setup and Reset
Changing the OSD Display Settings
Setup Reset
1. Press [m] on the product.
2. Move to Setup using the [
] buttons. Next, press the [
3. Move to Advanced Settings using the [
4. Move to OSD Display using the [
The following screen will appear.
] buttons. Next, press the [
] buttons. Next, press the [
: On
Not Optimum Mode OSD
: On
No Signal OSD
: On
] button.
] button.
Resetting Setup (Setup Reset)
1. Press [m] on the product.
2. Move to Setup using the [
OSD Display
Source OSD
This option returns the current settings under Setup to the default factory settings.
] button.
] buttons. Next, press the [
3. Move to Setup Reset using the [
The following screen will appear.
] button.
] buttons. Next, press the [
] button.
Setup
Language
: English
Time
Move
Enter
Return
Reset settings in setup?
OSD Display: Displays or hides a menu item on the screen.
• Source OSD
Reset All
• Not Optimum Mode OSD
Move
• No Signal OSD
5. Configure the settings as desired using the [
No
Yes
Setup Reset
] buttons.
Enter
Return
4. The selected option will be applied.
38
Setup and Reset
Reset All
This option returns all the current settings for a display to the default factory settings.
Resetting All Settings (Reset All)
1. Press [m] on the product.
2. Move to Setup using the [
] buttons. Next, press the [
3. Move to Reset All using the [
] buttons. Next, press the [
The following screen will appear.
] button.
] button.
Setup
Language
: English
Time
Safety LockReset settings in setup?
Settings return to default settings.
PowerAllOAdjustment
Yes
No
Setup Reset
Reset All
Move
Enter
Return
4. The selected option will be applied.
39
Chapter. 7
Troubleshooting Guide
Requirements Before Contacting
Samsung Customer Service Center
Troubleshooting
Solutions
Screen color is
inconsistent.
Adjust the COLOR settings.
The colors on the screen
have a shadow and are
distorted.
Adjust the COLOR settings.
Checking the Resolution and Frequency
White does not really
look white.
Adjust the COLOR settings.
When a mode exceeds the supported resolution (refer to “Preset Timing Modes”), the
message “Not Optimum Mode” will appear briefly.
There is no image on the
screen and the power
LED blinks every 0.5 to 1
second.
The product is operating in power-saving mode.
Before calling Samsung Customer Service Center, test your product as follows.
If the problem persists, contact Samsung Customer Service Center.
Check the following.
Audio issues
Screen issue
Troubleshooting
Press any key on the keyboard or move the mouse to return
to normal operating mode.
Solutions
The power LED is off.
The screen will not
switch on.
Make sure that the power cable is connected.
The screen is not clear.
The screen is blurry.
Set the resolution and frequency to the recommended level.
The screen is too bright.
The screen is too dark.
Adjust the Brightness setting.
Troubleshooting
Solutions
There is no sound.
Check that the source device connected to the product is
powered on.
The volume is too low.
Adjust the volume.
If the volume is still low after turning it up to the maximum
level, adjust the volume on your PC sound card or software
program.
40
Troubleshooting Guide
Q&A
Question
How can I change the
frequency?
Answer
Set the frequency on your graphics card.
Go to Control Panel → Appearance and Personalization →
Display → Screen Resolution → Advanced settings →
Monitor, and adjust Refresh rate under Monitor settings.
How can I change the
resolution?
Go to Control Panel → Appearance and Personalization →
Display → Adjust Resolution, and adjust the resolution.
How do I set powersaving mode?
To enable power-saving mode, go to Control Panel → Appearance
and Personalization → Personalization → Change screen
saver.
41
Chapter. 8
Specifications
General
Model Name
Panel
Synchronization
NL22B
Image Size
22 inches (55 cm)
Display area
473.76 mm (H) x 296.1 mm (V) /
18.65 inches (H) x 11.66 inches (V)
Horizontal
Frequency
30 – 81 kHz
Vertical
Frequency
56 – 85 Hz
Radeon HD6400 series (integrated on APU)
Power Supply
This product uses 100 to 240V.
Refer to the label at the back of the product as the
standard voltage can vary in different countries.
Dimensions (W x H x D) / Weight
Operating
Environmental
conditions
Storage
16.7M
Display Color
Resolution
Graphics
Optimum
Resolution
1680 x 1050 @ 60 Hz
Maximum
Resolution
1920 x 1080 @ 60 Hz
Panel Dots (Pixels)
513.6 x 417.4 x 376,5 mm / 14.8 kg
20.22 x 16.43 x 14.82 inches / 32.63 Ibs
Temperature: 32°F ~ 104°F (0°C ~ 40°C)
Humidity: 10 % – 80 %, non-condensing
Temperature: -4°F ~ 113°F (-20°C ~ 45°C)
Humidity: 5 % – 95 %, non-condensing
Due to the nature of the manufacturing of this
product, approximately 1 pixel per million (1ppm)
may be brighter or darker on the LCD panel. This
does not affect product performance.
148.5 MHz
No technical support will be provided if a problem occurs in any of these cases: changing
to another operating system, changing to a previous version of the same operating system,
installing software that is not compatible with the operating system provided. You will be
charged a fee for service. No product exchange or refund is allowed.
APU
AMD A4-3310M Dual-core
The above specifications are subject to change without notice to improve quality.
Memory
2GB (DDR3 SO-DIMM 2GB x 1)
This device is a Class A digital apparatus.
Storage Device
SSD 32GB
Operating System
Windows Embedded Standard 7
Maximum Pixel Clock
Product specifications
42
Specifications
(USA Only)
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
CALIFORNIA USA ONLY (Applicable for networking models only.)
This Perchlorate warning applies only to primary CR(Manganese Dioxide) Lithium coin cells in
the product sold or distributed ONLY in California USA
“Perchloate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/
perchlorate.”
PowerSaver
The power-saving function of this product reduces power consumption by switching off the
screen and changing the color of the power LED if the product is not used for a specified
period of time. The power is not turned off in power-saving mode. To switch the screen back
on, press any key on the keyboard or move the mouse.
PowerSaver
Normal operation mode
Power saving mode
Power turned off
(Power button)
Power lamp
On
Blinking
Off
Power Consumption
105 W
less than 3 watts
less than 1 watts
The power consumption level can vary in different operating conditions or when settings
are changed.
To reduce the power consumption to 0 watts, turn off the power switch on the back of
the product or disconnect the power cable. Be sure to disconnect the power cable when
you will not be using the product for an extended period of time. To reduce the power
consumption to 0 watts when the power switch is not available, disconnect the power
cable.
43
Specifications
Preset Timing Modes
This product can be set to only one resolution for each screen size to obtain the optimum
picture quality due to the nature of the panel. Therefore, a resolution other than the
specified resolution may degrade the picture quality. To avoid this, it is recommended that
you select the optimum resolution specified for the screen size of your product.
VESA, 1280 x 1024
79.976
75.025
135.000
+/+
VESA, 1440 x 900
55.935
59.887
106.500
-/+
VESA, 1600 x 900
60.000
60.000
108.000
+/+
VESA, 1680 x 1050
64.674
59.883
119.000
+/-
VESA, 1920 x
1080(RB)
66.587
59.934
138.500
+/-
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 640 x 480
31.469
59.940
25.175
-/-
IBM, 720 x 400
31.469
70.087
28.322
-/+
The time required to scan a single line from the left to the right side of the screen is called
a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency.
Horizontal frequency is measured in kHz.
MAC, 640 x 480
35.000
66.667
30.240
-/-
Vertical Frequency
MAC, 832 x 624
49.726
74.551
57.284
-/-
Repeating the same picture dozens of times per second allows you to view natural pictures.
The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.
MAC, 1152 x 870
68.681
75.062
100.000
-/-
VESA, 640 x 480
37.861
72.809
31.500
-/-
VESA, 640 x 480
37.500
75.000
31.500
-/-
VESA, 800 x 600
37.879
60.317
40.000
+/+
VESA, 800 x 600
48.077
72.188
50.000
+/+
VESA, 800 x 600
46.875
75.000
49.500
+/+
VESA, 1024 x 768
48.363
60.004
65.000
-/-
VESA, 1024 x 768
56.476
70.069
75.000
-/-
VESA, 1024 x 768
60.023
75.029
78.750
+/+
VESA, 1152 x 864
67.500
75.000
108.000
+/+
VESA, 1280 x 720
45.000
60.000
74.250
+/+
VESA, 1280 x 800
49.702
59.810
83.500
-/+
VESA, 1280 x 1024
63.981
60.020
108.000
+/+
Horizontal Frequency
44
Chapter. 9
Appendix
Contact SAMSUNG WORLD WIDE
COLOMBIA
01-8000112112
http://www.samsung.com
http://www.samsung.com/latin
NOTE
COSTA RICA
0-800-507-7267
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care Center.
1-800-SAMSUNG (726-7864)
http://www.samsung.com
http://www.samsung.com/latin
DOMINICA
1-800-751-2676
1-800-SAMSUNG (726-7864)
(English)
MEXICO
01-800-SAMSUNG (726-7864)
ECUADOR
1-800-10-7267
0800-333-3733
http://www.samsung.com
BOLIVIA
800-10-7260
http://www.samsung.com
CHILE
4004-0000
800-SAMSUNG(726-7864)
From mobile 02-482 82 00
http://www.samsung.com/latin_en
http://www.samsung.com/latin
ARGENTINE
0800-124-421
(Spanish)
(English)
http://www.samsung.com
LATIN AMERICA
BRAZIL
http://www.samsung.com/latin_en
http://www.samsung.com/latin
http://www.samsung.com/ca_fr
(French)
(Spanish)
(English)
http://www.samsung.com/ca
CANADA
http://www.samsung.com/latin_en
(English)
NORTH AMERICA
U.S.A
(Spanish)
http://www.samsung.com
http://www.samsung.com
EL SALVADOR
800-6225
(Spanish)
http://www.samsung.com/latin_en
(English)
http://www.samsung.com/latin
GUATEMALA
1-800-299-0013
(Spanish)
http://www.samsung.com/latin_en
(English)
45
Appendix
http://www.samsung.com/latin
HONDURAS
800-27919267
EUROPE
(Spanish)
http://www.samsung.com/latin_en
AUSTRIA
0810 - SAMSUNG (7267864, € 0.07/
http://www.samsung.com
min)
BELGIUM
02-201-24-18
(English)
JAMAICA
1-800-234-7267
http://www.samsung.com
http://www.samsung.com/be (Dutch)
http://www.samsung.com/latin
NICARAGUA
PANAMA
00-1800-5077267
800-7267
(Spanish)
05 133 1999
http://www.samsung.com
(English)
BULGARIA
07001 33 11 , normal tariff
http://www.samsung.com
http://www.samsung.com/latin
CROATIA
062 SAMSUNG (062 726 7864)
http://www.samsung.com
CYPRUS
(English)
8009 4000 only from landline
(+30) 210 6897691 from mobile and http://www.samsung.com
land line
800-SAMSUNG (800-726786)
(Spanish)
http://www.samsung.com/latin_en
0-800-777-08
http://www.samsung.com
PUERTO RICO
1-800-682-3180
http://www.samsung.com
1-800-SAMSUNG (726-7864)
http://www.samsung.com
0-800-100-5303
http://www.samsung.com
TOBAGO
VENEZUELA
(French)
BOSNIA
http://www.samsung.com/latin_en
PERU
TRINIDAD &
http://www.samsung.com/be_fr
http://www.samsung.com
CZECH
Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská
394/17, 180 00, Praha 8
DENMARK
70 70 19 70
http://www.samsung.com
EIRE
0818 717100
http://www.samsung.com
ESTONIA
800-7267
http://www.samsung.com
FINLAND
09 85635050
http://www.samsung.com
FRANCE
01 48 63 00 00
http://www.samsung.com
GERMANY
0180 5 SAMSUNG bzw.
0180 5 7267864* (*0,14 €/Min. aus
http://www.samsung.com
dem dt. Festnetz, aus dem Mobilfunk
max. 0,42 €/Min.)
46
Appendix
GREECE
80111-SAMSUNG (80111 726 7864)
only from land line
http://www.samsung.com
(+30) 210 6897691 from mobile and
land line
HUNGARY
06-80-SAMSUNG (726-7864)
http://www.samsung.com
ITALIA
800-SAMSUNG (726-7864)
http://www.samsung.com
LATVIA
8000-7267
http://www.samsung.com
LITHUANIA
8-800-77777
http://www.samsung.com
LUXEMBURG
261 03 710
http://www.samsung.com
MACEDONIA
023 207 777
http://www.samsung.com
MONTENEGRO
020 405 888
http://www.samsung.com
NETHERLANDS
0900-SAMSUNG (0900-7267864) (€
http://www.samsung.com
0,10/Min)
NORWAY
815 56480
http://www.samsung.com
POLAND
0 801-1SAMSUNG (172-678)
+48 22 607-93-33
http://www.samsung.com
PORTUGAL
808 20-SAMSUNG (808 20 7267)
http://www.samsung.com
ROMANIA
08008 SAMSUNG (08008 726 7864)
http://www.samsung.com
TOLL FREE No.
SERBIA
0700 SAMSUNG (0700 726 7864)
http://www.samsung.com
SLOVAKIA
0800 - SAMSUNG (0800-726 786)
http://www.samsung.com
SPAIN
902 - 1 - SAMSUNG (902 172 678)
http://www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
http://www.samsung.com
http://www.samsung.com/ch
SWITZERLAND
0848 - SAMSUNG (7267864, CHF
0.08/min)
(German)
http://www.samsung.com/ch_fr
(French)
U.K
0330 SAMSUNG (7267864)
http://www.samsung.com
CIS
ARMENIA
0-800-05-555
http://www.samsung.com
AZERBAIJAN
088-55-55-555
http://www.samsung.com
BELARUS
810-800-500-55-500
http://www.samsung.com
GEORGIA
0-800-555-555
http://www.samsung.com
KAZAKHSTAN
8-10-800-500-55-500 (GSM: 7799)
http://www.samsung.com
KYRGYZSTAN
00-800-500-55-500
http://www.samsung.com
MOLDOVA
0-800-614-40
http://www.samsung.com
MONGOLIA
+7-800-555-55-55
http://www.samsung.com
RUSSIA
8-800-555-55-55
http://www.samsung.com
TADJIKISTAN
8-10-800-500-55-500
http://www.samsung.com
http://www.samsung.com/ua
UKRAINE
0-800-502-000
(Ukrainian)
http://www.samsung.com/ua_ru
(Russian)
UZBEKISTAN
8-10-800-500-55-500
http://www.samsung.com
47
Appendix
MIDDLE EAST
ASIA PACIFIC
AUSTRALIA
1300 362 603
http://www.samsung.com
CHINA
400-810-5858
http://www.samsung.com
http://www.samsung.com/ae
BAHRAIN
8000-4726
(852) 3698 4698
(Chinese)
http://www.samsung.com/hk_en
EGYPT
08000-726786
http://www.samsung.com
(English)
IRAN
021-8255
http://www.samsung.com
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
http://www.samsung.com
INDONESIA
0800-112-8888
021-5699-7777
http://www.samsung.com
JAPAN
0120-327-527
http://www.samsung.com
MALAYSIA
1800-88-9999
http://www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
http://www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG (726-7864) for
PLDT
1-800-3-SAMSUNG (726-7864) for
Digitel
1-800-8-SAMSUNG (726-7864) for
Globe
02-5805777
http://www.samsung.com
SINGAPORE
1800-SAMSUNG (726-7864)
http://www.samsung.com
TAIWAN
0800-329-999
0266-026-066
http://www.samsung.com
THAILAND
1800-29-3232
02-689-3232
http://www.samsung.com
VIETNAM
1 800 588 889
http://www.samsung.com
INDIA
http://www.samsung.com/ae_ar
(Arabic)
http://www.samsung.com/hk
HONG KONG
(English)
JORDAN
800-22273
065777444
http://www.samsung.com
http://www.samsung.com/ae
KUWAIT
183-2255
(English)
http://www.samsung.com/ae_ar
(Arabic)
MOROCCO
080 100 2255
http://www.samsung.com
http://www.samsung.com/ae
OMAN
800-SAMSUNG(726-7864)
(English)
http://www.samsung.com/ae_ar
(Arabic)
http://www.samsung.com/ae
SAUDI ARABIA
9200-21230
(English)
http://www.samsung.com/ae_ar
(Arabic)
TURKEY
444 77 11
http://www.samsung.com
U.A.E
800-SAMSUNG (726-7864)
http://www.samsung.com
48
Appendix
AFRICA
ANGOLA
91-726-7864
http://www.samsung.com
BOTSWANA
0800-726-000
http://www.samsung.com
CAMEROON
7095- 0077
http://www.samsung.com
COTE D’ IVOIRE
GHANA
8000 0077
0800-10077
0302-200077
Responsibility for the Pay Service
(Cost to Customers)
NOTE
http://www.samsung.com
When the service is requested, in spite of in warranty, we may charge you for a visit from a service
technician in the following cases.
http://www.samsung.com
Not a product defect
KENYA
0800 724 000
http://www.samsung.com
NAMIBIA
8197267864
http://www.samsung.com
NIGERIA
0800-726-7864
http://www.samsung.com
SENEGAL
800-00-0077
http://www.samsung.com
SOUTH AFRICA
0860-SAMSUNG (726-7864)
http://www.samsung.com
TANZANIA
0685 88 99 00
http://www.samsung.com
UGANDA
0800 300 300
http://www.samsung.com
ZAMBIA
211350370
http://www.samsung.com
Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
• If a service technician gives instructions on how to use product or simply adjusts options
without disassembling product.
• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal,
etc.)
• If a product is reinstalled or devices are connected additionally after installing the
purchased product for the first time.
• If a product is reinstalled to move to a different spot or to move to a different house.
• If customer requests instructions on how to use because of another company’s product.
• If customer requests instructions on how to use the network or another company’s
program.
• If customer requests software installation and setup for the product.
• If a service technician removes/cleans dusts or foreign materials inside of the product.
• If customer requests an installation additionally after purchasing a product through homeshopping or online.
49
Appendix
A Product damage caused by customer’s fault
Product damage caused by customer’s mishandling or wrong repair.
If a product damage is caused by;
Correct Disposal
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
• External impact or drop.
(Applicable in countries with separate collection systems)
• Use of supplies or separatly sold product unspecified by Samsung.
This marking on the product, accessories or literature indicates that the product and
• Repair from a person besides an engineer of outsourcing service company or partner of
Samsung Electronics Co., Ltd.
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed
• Remodeling or repairing the product by customer.
harm to the environment or human health from uncontrolled waste disposal, please
• Using it with incorrect voltage or non-authorised electrical connections.
separate these items from other types of waste and recycle them responsibly to
• Not following the “cautions” in User Manual.
promote the sustainable reuse of material resources.
Others
or their local government office, for details of where and how they can take these
• If product fails by natural disaster (lightning, fire, earthquake, flood damage, etc).
• If consumable components are all used up (Battery, Toner, Fluorescent lights, Head,
Vibrator, Lamp, Filter, Ribbon, etc.)
NOTE
If customer requests a service in case the product has no defect, service fee may be charged. So please
read User Manual first.
of with other household waste at the end of their working life. To prevent possible
Household users should contact either the retailer where they purchased this product,
items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract. This product and its electronic accessories should not be mixed
with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
This marking on the battery, manual or packaging indicates that the batteries in this
product should not be disposed of with other household waste at the end of their
working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the
battery contains mercury, cadmium or lead above the reference levels in EC Directive
2006/66. If batteries are not properly disposed of, these substances can cause harm
to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries
from other types of waste and recycle them through your local, free battery return
system.
50
Appendix
Correct disposal of batteries in this product
(Applicable in countries with separate collection systems)
The marking on the battery, manual or packaging indicates that the battery in this
product should not be disposed of with other household waste. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium
or lead above the reference levels in EC Directive 2006/66.
The battery incorporated in this product is not user replaceable. For information on
its replacement, please contact your service provider. Do not attempt to remove the
battery or dispose it in a fire. Do not disassemble, crush, or puncture the battery. If
Optimum Picture Quality and
Afterimage Burn-in Prevention
Optimum Picture Quality
• To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the
resolution and refresh rate as follows. The picture quality of TFT-LCDs may degrade if the
optimum resolution is not selected.
you intend to discard the product, the waste collection site will take the appropriate
• Resolution: 1680 x 1050
measures for the recycling and treatment of the product, including the battery.
• Vertical frequency (refresh rate): 56 ~ 85 Hz
• Due to the nature of the manufacturing of this product, approximately 1 pixel per million
(1ppm) may be brighter or darker on the panel. This does not affect product performance.
• The number of sub-pixels by panel type: 5,292,000
• Run “Auto Adjustment” to improve the picture quality. If noise is still found even after auto
adjustment, adjust Coarse or Fine.
• Leaving the screen fixed on a stationary image for an extended period of time may cause
afterimage burn-in or defective pixels.
• Activate power-saving mode or a dynamic screen saver if you will not be using the
product for an extended period of time.
• Unlike CDT monitors, TFT-LCD monitors (due to the nature of the panel) can be set to
only one resolution to obtain the optimum picture quality. Therefore, setting a resolution
other than the specified resolution may degrade the picture quality. To avoid this, it is
recommended that you select the optimum resolution specified for your monitor.
51
Appendix
Prevention of Afterimage Burn-in
• Powering Off, Screen Saver and Power Saving Mode
• Power off the product for 4 hours after using it for 20 hours.
What is afterimage burn-in?
• Power off the product for 2 hours after using it for 12 hours.
Afterimage burn-in should not occur when the LCD panel is operating normally. Normal
operation refers to a continuously changing video pattern. If the LCD panel displays a fixed
pattern for an extended period of time (more than 12 hours), a slight voltage difference may
occur between the electrodes in pixels that control the liquid crystals.
Such a voltage difference between electrodes increases with time and makes the liquid
crystals thinner. When this occurs, a previous image can remain on the screen when the
pattern changes. To prevent this, the accumulated voltage difference should be reduced.
Black Matrix
Source
Common
Electrode (ITO)
• Go to Display Properties > Power Supply on your PC and set the product to power off
as required.
• Using a screen saver is recommended.
It is best to use a single-color or moving-image screen saver.
• Regular color Change
Type 1
Color-Filter
Type 2
FLIGHT
TIME
FLIGHT
TIME
OZ348
20:30
OZ348
20:30
UA102
21:10
UA102
21:10
NOTE
Drain
Use 2 colors
Switch between 2 colors every 30 minutes as shown above.
• Avoid combinations of a text color and background color of contrasting brightness.
Avoid using grey as it may contribute to afterimage burn-in.
Avoid using colors of contrasting brightness (black and white; grey).
Gate
TFT
Data Bus-Line
Pixel Electrode (ITO)
Storage
Capaccitor (Cs)
FLIGHT : TIME
FLIGHT : TIME
OZ348 : 20:30
OZ348 : 20:30
• Regular Text color Change
• Use bright colors of similar brightness.
Interval: Change text color and background color every 30 minutes
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
FLIGHT : TIME
OZ348
: 20:30
52
Appendix
• Move and change text every 30 minutes as shown below.
FLIGHT
: TIME
OZ348
: 20:30
[ Step 1 ]
[ Step 2 ]
FLIGHT
: TIME
OZ348
: 20:30
[ Step 3 ]
• Regularly display a moving image along with a logo.
Interval: Display a moving image along with a logo for 60 seconds after using for 4
hours.
• The best way to protect the product from afterimage burn-in is switching the power
off or setting the PC or system to run a screen saver when not in use. Also, Warranty
service may be limited depending on instruction guide.
53
Appendix
Terminology
OSD(On Screen Display)
On screen display (OSD) allows you to customize on-screen settings to optimize the picture
quality as required. You can change the screen brightness, tint, size and many other settings
using menus displayed on the screen.
Gamma
The Gamma menu adjusts the grey scale that represents middle tones on the screen.
Adjusting the brightness brightens the whole screen, but adjusting Gamma only brightens the
medium brightness.
Resolution
Resolution is the number of horizontal pixels and vertical pixels that form a screen. It
represents the level of display detail. A higher resolution displays a greater amount of
information on the screen and is suitable for performing multiple tasks at the same time. E.g.
A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080
vertical lines (vertical resolution).
Plug & Play
The Plug & Play feature allows the automatic exchange of information between a monitor and
PC to produce an optimum display environment. The monitor uses VESA DDC (international
standard) to execute Plug & Play.
Horizontal Frequency
Characters or images displayed on the monitor screen consist of numerous dots (pixels).
Pixels are transmitted in horizontal lines, which are then arranged vertically to create
an image. The horizontal frequency is measured in kHz and represents how many times
horizontal lines per second are transmitted and displayed on the monitor screen. A horizontal
frequency of 85 means that the horizontal lines that make up an image are transmitted 85000
times per second. The horizontal frequency is indicated in 85kHz.
Vertical Frequency
One image is made of numerous horizontal lines. The vertical frequency is measured in Hz
and represents how many images can be created per second by those horizontal lines. A
vertical frequency of 60 means that an image is transmitted 60 times per second. The vertical
frequency is also called “refresh rate” and affects screen flicker.
54
Download PDF

advertising