Samsung | PS-50P5H | Samsung PS-50P5H Benutzerhandbuch

BN68-00973A-00Eng
9/28/05
4:22 PM
Page 1
PDP-TELEVISION
(PLASMA DISPLAY PANEL)
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
Picture In Picture (PIP)
Colour Weakness Enhancement Mode
My Colour Control
TELETEXT (Option)
SRS TruSurroundXT
Digital Natural Image engine
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 2
User Instructions
◆ Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the
plasma monitor panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as “screen burn”. To avoid such image retention, reduce the degree of
brightness and contrast of the screen when displaying a still image.
◆ Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place
over 2000m in height so do not install and operate there.
◆ Heat on the top of the PDP TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel
through the vent hole in the upper part of the product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
◆ The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of
surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.
◆ Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require
sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.
These pixels will have no impact on the performance of the product.
◆ Avoid operating the TV at temperatures below 5°C(41°F)
◆ A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave
traces of borders displayed on the left, right and centre of the screen caused
by the difference of light emission on the screen.
Playing a DVD or a game console may cause similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
◆ Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may
produce partial afterimages.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
◆ Warranty
- Warranty does not cover any damage caused by image retention.
- Burn-in is not covered by the warranty.
English - 2
BN68-00973A-01Eng
11/4/05
10:15 AM
Page 3
Checking Parts
Sold Separately
Owner’s Instructions
Power Cord
t.
Remote Control/
AAA Batteries
Warranty Card/
Registration Card/
Safety Guide Manual
(Not available in all locations)
Ferrite Core for
Ferrite Core for S-VIDEO
Power Cord
Cable (Side AV)
(PS-50P5H, PS-63P5H)
(PS-63P5H)
➢
S-VIDEO Cable
HDMI Cable
Component Cables
(RCA)
Scart Cable
Antenna Cable
PC Cable
PC Audio Cable
HDMI/DVI Cable
Ferrite Core (Power Cord)
The ferrite cores are used to shield the cables from interference.
When connecting a cable, open the ferrite core and clip it around
the cable.
➢
Ferrite Core (Side AV)
The ferrite cores are used to shield the cables from interference.
When connecting a cable, open the ferrite core and clip it around
the cable near the plug.
English - 3
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 4
Contents
◆ FOREWORD
■
User Instructions............................................................................................
2
◆ CONNECTING AND PREPARING YOUR DISPLAY
■
■
■
■
■
■
■
■
■
■
■
Control Panel.................................................................................................
Infrared Remote Control ................................................................................
Inserting the Batteries in the Remote Control................................................
Assembling the Stand-Base ..........................................................................
Installing the Display on the Wall Attachment Panel .....................................
Connecting to an Aerial or Cable Television Network ...................................
Connecting a Satellite Receiver or Decoder..................................................
Switching Your Television On and Off...........................................................
Familiarizing Yourself with the Remote Control.............................................
Plug & Play Feature.......................................................................................
Choosing Your Language..............................................................................
6
8
9
9
10
12
12
13
14
15
16
◆ SETTING THE CHANNELS
■
■
■
■
■
■
■
■
Storing Channels Automatically.....................................................................
Storing Channels Manually............................................................................
Skipping Unwanted Channels .......................................................................
Sorting the Stored Channels .........................................................................
Assigning Names to Channels ......................................................................
Locking the Channel......................................................................................
Using the LNA (Low Noise Amplifier) Feature...............................................
Fine Tuning Channel Reception ....................................................................
17
18
20
21
22
23
24
25
◆ USING YOUR DISPLAY
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Displaying Information ...................................................................................
Changing the Picture Standard .....................................................................
Customizing the Picture Settings...................................................................
Setting the Picture (PC Mode).......................................................................
Selecting the Picture Size..............................................................................
Viewing the DNIe Demonstration ..................................................................
Freezing the Current Picture .........................................................................
Setting the My Colour Control (Easy Control) ...............................................
Setting the My Colour Control (Detail Control) ..............................................
Setting the Blue Screen.................................................................................
Using the Colour Weakness Enhancement Feature .....................................
Using the Energy Saving Feature..................................................................
Viewing the Picture in Picture (PIP)...............................................................
Using the Digital NR (Noise Reduction) Feature ...........................................
Preventing Screen Burn-in...............................................................................
Reducing the Effects of Screen Burn................................................................
Changing the Sound Standard ......................................................................
25
26
27
28
30
31
31
32
33
34
35
36
37
40
41
42
43
continued...
English - 4
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 5
Contents
◆ USING YOUR DISPLAY (continued)
■
■
■
■
■
■
■
■
■
■
■
Customizing the Sound Settings ...................................................................
Setting the TruSurround XT...........................................................................
Adjusting the Volume Automatically ..............................................................
Selecting the Internal Mute............................................................................
Setting the Melody Sound .............................................................................
Selecting the Sound Mode (depending on the model) ..................................
Setting and Displaying the Current Time.......................................................
Setting the Sleep Timer .................................................................................
Switching the Television On and Off Automatically .......................................
Viewing an External Signal Source ...............................................................
Redirecting an Input to the External Output ..................................................
44
45
45
46
46
47
48
49
50
52
53
◆ USING THE TELETEXT FEATURE
■
■
■
■
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting Display Options..............................................................................
Selecting a Teletext Page..............................................................................
54
55
56
57
◆ ADDITIONAL INFORMATION AND CONNECTIONS
■
■
■
■
■
■
■
■
■
■
■
Connecting to External Input/Output .............................................................
Connecting to the AV Output.........................................................................
Connecting to the RCA Input.........................................................................
Connecting to the S-Video Input....................................................................
Connecting to the Component Input..............................................................
Connecting to the PC Input ...........................................................................
Connecting to the HDMI Input .......................................................................
Connecting to the HDMI/DVI Compatible ......................................................
Connecting Home Theater System ...............................................................
Setting up Your PC Software (Windows only) ..............................................
Input Mode (PC) ............................................................................................
58
59
60
60
61
61
62
62
63
64
65
◆ RECOMMENDATIONS FOR USE
■
■
Programming the Remote Control for Other Components ............................
- VCR Remote Control Codes .......................................................................
- Cable Box (CATV) Remote Control Codes .................................................
- Set-Top Boxs (STB) Remote Control Codes...............................................
- DVD Remote Control Codes .......................................................................
Troubleshooting: Before Contacting Service Personnel................................
Symbols
Press
☛
Important
66
67
68
68
69
70
➢
Note
English - 5
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 6
Control Panel
➢
The actual configuration of your TV may be different, depending on
your model.
Front of the TV
Speaker
a)
a) SOURCE button
e)
Select the external input source.
b) MENU button
c)
(ENTER) button
Confirm your choice (Store or Enter).
f)
(POWER) button
Display the on-screen menu.
Press to turn the TV on and off.
(+, -) buttons
Adjust the volume.
Power Indicator
b
- Power Off: Blue
- Power On: Off
c)
d) C/P.
( ,
) buttons
Select channels.
g) Remote Control Sensor
Aim the remote control towards this spot on the TV.
➢
◆ You can use the C/P. ( , ) buttons to switch on the TV when it is in standby mode depending
on the model.
◆ The
(+, -) and C/P. ( , ) buttons have the same function as the ▲/▼/œ/√ buttons on
the remote control.
◆ If the remote control no longer works or you have misplaced it, you can use the controls on the
panel of the TV.
continued...
English - 6
d
e)
➢
➢
BN68-00973A-00Eng
10/6/05
4:18 PM
Page 7
Side of the TV
PS-63P5H
Rear of the TV
PS-50P5H
a) HDMI/DVI IN
Connect to the HDMI jack of a device with
HDMI output. These inputs can also be used
as a DVI connection with separate analog
audio inputs. An optional HDMI/DVI cable
will be necessary to make this connection.
When using the optional HDMI/DVI adapter,
the DVI analog audio inputs on your TV allow
you to receive left and right audio from your
DVI device. (Not compatible with PC)
b) DVI AUDIO IN L/R
f) S-VIDEO 1, 2
Video input for external devices with an S-Video
output, such as a camcorder or VCR.
g) COMPONENT IN 1, 2
Video (Y/PB/PR) and audio (AUDIO L/R) inputs for
Component.
h) ANT IN (75Ω)
75Ω Coaxial connector for Aerial/Cable Network.
i) EXT 1, EXT 2
Inputs or outputs for external devices, such as
VCR, DVD, video game device or video disc
players.
DVI audio outputs for external devices.
c) AV OUT (VIDEO / AUDIO L/R)
Outputs for external devices.
j) SERVICE
Connector for service only.
d) AV IN 1, 2 (VIDEO / AUDIO L/R)
Video and audio inputs for external devices, such
as a camcorder or VCR.
g
k) POWER IN
Connect the supplied power cord.
e) PC IN / AUDIO
Connect to the video and audio output jack on
your PC.
➢
➢
For further details about connection, refer to pages 58~63.
Whenever you connect an audio or video system to your television, ensure that all
elements are switched off. Refer to the documentation supplied with your equipment for
detailed connection instructions and associated safety precautions.
..
English - 7
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 8
Infrared Remote Control
Y
yo
TURNS THE TV ON AND OFF
MAKE THE REMOTE CONTROL WORK
FOR TV, STB, VCR, CABLE, OR DVD
(Refer to page 66)
DIRECT CHANNEL SELECTION
AUTOMATIC SWITCH-OFF/
TELETEXT SIZE SELECTION
(Refer to page 49)
PICTURE STILL
(Refer to page 31)
PICTURE SIZE
(Refer to page 30)
FASTEXT TOPIC SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
MENU DISPLAY/
TELETEXT INDEX
TELETEXT DISPLAY/
MIX BOTH TELETEXT
INFORMATION AND THE
NORMAL BROADCAST
MOVE TO THE REQUIRED MENU OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SOUND EFFECT SELECTION/
TELETEXT CANCEL
(Refer to page 43)
ADJUST SCREEN BRIGHTNESS
TO SURROUNDING
ENVIRONMENT
(Refer to page 36)
REMOTE CONTROL SETUP
IF YOUR REMOTE CONTROL IS NOT
FUNCTIONING PROPERLY, TAKE
OUT THE BATTERIES AND PRESS
THE RESET BUTTON FOR ABOUT
2~3 SECONDS. RE-INSERT THE
BATTERIES AND TRY USING THE
REMOTE CONTROL AGAIN.
➢
English - 8
SWITCH REPEATEDLY BETWEEN THE
LAST TWO CHANNELS DISPLAYED/
TELETEXT SUB-PAGE
SOUND MODE SELECTION (Refer to page 47)
TruSurround XT MODE SELECTION
(Refer to page 45)
NEXT CHANNEL/
TELETEXT NEXT PAGE
EXTERNAL INPUT SELECTION/
TELETEXT PAGE HOLD
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
TV MODE SELECTION/ EXIT MENU/
EXIT TELETEXT
(DEPENDING ON THE MODEL)
INFORMATION DISPLAY/
TELETEXT REVEAL
WHEN PRESSING THIS BUTTON, A NUMBER OF
BUTTONS ON THE REMOTE CONTROL (E.G. NUMERIC,
VOLUME AND CHANNEL BUTTONS) LIGHT UP FOR A
FEW SECONDS AND THEN TURN OFF TO SAVE
POWER. THIS FUNCTION IS TO CONVENIENTLY USE
THE REMOTE CONTROL AT NIGHT OR WHEN DARK.
CONFIRM YOUR CHOICE
(STORE OR ENTER)
PICTURE EFFECT SELECTION
(Refer to page 26)
PIP FUNCTIONS:
- PIP ACTIVATION OR DEACTIVATION
(PIP)
- SOURCE SELECTION (SOURCE)
- SIZE SELECTION (SIZE)
- CHANNEL SELECTION (P
)
(Refer to pages 37-39)
VCR/DVD FUNCTIONS:
- REWIND (REW)
- STOP
- PLAY/PAUSE
- FAST FORWARD (FF)
The performance of the remote control may be affected by bright light.
C,
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 9
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) upwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ - on the battery against - on the remote control
◆ + on the battery against + on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
➢ Do not mix battery types, i.e. alkaline and manganese.
➢ The light function on the remote control consumes a large
amount of battery power.
Using this function frequently will shorten the battery life time
considerably.
Assembling the Stand-Base
1
Assemble the PDP with the stand and firmly secure the PDP using
4 screws provided.
➢
Two or more people should carry the PDP. Never lay the
PDP on the floor because of possible damage to the screen.
Always store the PDP upright.
English - 9
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 10
Installing the Display on the Wall Attachment Panel
➢
Refer to the correct installation guide according to your wall bracket.
Installation Notes
◆ Contact a technician for installing the wall bracket.
◆ Samsung Electronics is not responsible for any damages to the product or harm to customers when
the installation is done by the customer.
◆ This product is for installing on cement walls. The product may not stay in place when installed on
plaster or wood.
◆ Connect all external devices prior to installing the wall bracket.
◆ The package contents and parts supplied for the wall mount are subject to change without prior notice.
◆
Components
◆ Only use the components and accessories shipped with the product.
Wall Bracket
Hinge
Accessories
Plastic Hanger: 4
1
Left: 1
Screw
Right: 1
:4
Screw
: 11
Anchor : 11
Wall Bracket Assembly
1
Insert and tighten the Captive Screw in
the direction of the arrow.
When done, mount the wall bracket on
the wall.
2
Captive Screw
Before drilling into the wall, check if the length
between the two locking holes at the back of
the product is correct.
If the length is too short or long, loosen all or
some of the 4 screws on the wall bracket to
adjust the length.
Length between the
two locking holes
➢
Wall Bracket
Hinge (Left)
There are two hinges
(left and right). Use the
correct one.
3
Hinge (Right)
Check the installation diagram and mark the drill
points on the wall. Use the 5.0 mm bit to drill holes
deeper than 35 mm.
Fix each anchor in the corresponding hole.
Match each of the brackets and hinge holes to the
corresponding anchor holes and insert and tighten
the 11 screws .
continued...
English - 10
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 11
t.
To mount the product on the wall bracket
◆ The shape of the product may vary depending on the model. (The assemblies of the plastic hanger
and the screw are the same)
1
Remove the 4 screws on the back of the product.
2
Insert the screw into the plastic hanger.
(See the figure below)
☛
3
Tighten the 4 screws in step 2 (plastic hanger
+ screw ) to the rear holes of the product.
4
◆ Mount the product on the wall bracket
and make sure it is properly fixed to
the left and right plastic hangers.
◆ Be careful when installing the product
on the bracket as fingers can be
caught in the holes.
◆ Make sure the wall bracket is securely
fixed to the wall, or the product may not
stay in place after installation.
Remove safety pin (#) and insert the 4 product
holders into the corresponding bracket holes (!). Then
place the product (@) so that it is firmly fixed to the
bracket. Make sure to reinsert and tighten the safety
pin (#) to securely hold the product to the bracket.
PDP
Wall Bracket Wall
Wall Bracket Angle Adjustment
➢
o
Adjust the bracket angle to -2 before installing it on the wall.
1
Fix the product to the wall bracket.
2
Hold the product at the top in the center and pull it
forward (direction of the arrow) to adjust the angle.
(See the figure to the right)
3
You can adjust the bracket angle between -2° and 15°.
Make sure to use the top center,
and not the left or the right side of
the product to adjust the angle.
..
English - 11
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 12
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1
In these cases, connect the aerial or network input cable to
the ANT IN jack on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically” on page 17
◆ “Storing Channels Manually” on page 18
Rear of the TV
or
Cable Television
Network
➢
When installing or re-installing your TV, be sure to use the
supplied coaxial antenna cable. If you connect using a different
coaxial cable, there is risk of noise or interference to the screen
image. (You must not use another general purpose cable.
Use the 3M/5M/7M cable supplied by Samsung.)
Connecting a Satellite Receiver or Decoder
Rear of the TV
In order to watch television programmes broadcast via a satellite network,
you must connect a satellite receiver to the rear of TV. Also, in order to
descramble a coded transmission signal, you must connect a decoder to
the rear of TV.
Using a SCART cable
Connect the receiver (or decoder) SCART cable to one of the
SCART connectors on the rear of the television.
Using a coaxial cable
Connect a coaxial cable to the:
◆ Receiver (or Decoder) output socket.
◆ Television aerial input socket.
➢
Satellite receiver/
Decoder
English - 12
If you wish to connect both a satellite receiver (or decoder) and
a VCR, you should connect the:
◆ Receiver (or Decoder) to the VCR
◆ VCR to the television
Otherwise, connect the receiver (or decoder) directly to the
television.
T
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 13
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
Result:
➢
2
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
Press the
(power) button on the front of the television (or
(power) button on the remote control) to switch the television on.
Result:
➢
3
Front of the TV
The Standby indicator on the front of the television
lights up.
The programme that you were watching last is
re-selected automatically.
If you have not yet stored any channels, no clear picture
appears. Refer to “Storing Channels Automatically” on page
17 or “Storing Channels Manually” on page 18.
To switch your television off, press the
(power) button again.
n
,
English - 13
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 14
Familiarizing Yourself with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume.
◆ Set up the television using the on-screen menu system.
The following table presents the most frequently used buttons and
their functions.
Button
to
Viewing Function
Menu Function
Used to display the next
stored channel.
Used to display the
previous stored channel.
-
Used to display the corresponding channels.
➢
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this
will result in a single digit channel being displayed.
Used to increase the volume.
Used to decrease the volume.
MUTE
(
)
MENU
(
)
Used to switch the sound off temporarily.
➢
To turn the sound back on, press this button
again, or press the or button.
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a sub-menu
containing selections for
the current menu option.
◆ Increase/decrease a
menu option value.
EXIT/TV
(
)
PRE-CH
(
)
English - 14
Used to confirm your choice.
Used to exit from the menu
system and return to normal
viewing directly.
Press the PRE-CH button. The TV will switch to the last
channel viewed. To quickly switch between two channels
that are far apart, select the first channel, then use the
numeric buttons to select the second channel. Then, use the
PRE-CH button to quickly alternate between them.
W
se
T
BN68-00973A-00Eng
9/28/05
5:06 PM
Page 15
Plug & Play Feature
When the television is initially powered on, several basic customer
settings proceed automatically and subsequently.
The following settings are available.
Plug & Play
Start Plug & Play
OK
1
If the television is in standby mode, press the
the remote control.
Result:
2
➢
3
Exit
Plug & Play
English
Deutsch
Français
Nederlands
Language
) button.
The Language menu is displayed.
The Language menu will automatically appear after several
seconds, even if the ENTER (
) button is not pressed.
Move
Select the appropriate language by pressing the … or † button.
Press the ENTER (
) button.
Result:
4
Enter
The message to start Plug & Play is displayed.
To start Plug & Play, press the ENTER (
Result:
(power) button on
The message to check the connected status of the
antenna is displayed.
Enter
Skip
Plug & Play
Check antenna input.
OK
Enter
Make sure that the antenna is connected to the TV.
Press the ENTER (
) button.
Skip
Plug & Play
Result:
➢
5
The Country menu is displayed.
Belgium
France
Germany
Italy
Country
If you do not press the ENTER (
) button, the clock
setting menu appears after several seconds.
Select your country or area by pressing the … or † button.
Press the ENTER (
) button.
Result:
Move
Enter
Skip
The menu to select channels is displayed.
Plug & Play
6
To start channel store, press the ENTER (
Result:
➢
➢
7
e
Auto Store
The search will end automatically. Channels are sorted
and stored in the order which reflects their position in
the frequency range (with lowest first and highest last).
When this has finished, the menu to set the time will be
displayed.
P 1
) button to set the clock.
40 MHz
0%
Enter
To stop the search before it has finished or return to normal
) or the ENTER (
) button.
viewing, press the MENU (
Press the ENTER (
C --
Start
Skip
Plug & Play
--
Clock Set
Press the œ or √ button to select the hour or minute.
Set these by pressing the … or † button.
Press the ENTER (
) button.
➢
8
) button.
:
Enter
--
Skip
Plug & Play
You can enter the hours or minutes by using the numeric
buttons on the remote control.
The settings are complete, and the stored channel will be
activated.
Clock Set
Move
00
Adjust
:
Enter
Enjoy your viewing
OK
continued...
English - 15
00
Skip
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 16
If you want to reset this feature...
TV
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
Move
1
English
2
Off
Off
Off
Enter
Press the MENU (
Result:
) button.
The main menu is displayed.
Press the … or † button to select Setup.
Result:
The Setup menu is displayed.
3
Press the ENTER (
) button.
4
Press the ENTER (
) button again to select Plug & Play.
Return
Result:
5
The message to start Plug & Play is displayed.
For further details on settings, refer to the previous page.
Choosing Your Language
TV
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
Move
TV
English
1
Result:
Off
Off
Off
Enter
2
Move
English
English
Deutsch
Français
Off
Nederlands
Off
Español
Off
Enter
English - 16
Return
) button.
The main menu is displayed.
Press the … or † button to select Setup.
Result:
Return
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
Press the MENU (
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Language.
Press the ENTER (
) button.
Result:
) button.
The available languages are listed.
5
Select the appropriate language by pressing the … or † button.
Press the ENTER (
) button.
6
Press the EXIT button to exit.
Y
de
m
yo
to
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 17
Storing Channels Automatically
You can scan for the frequency ranges available to you (availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers. However
you can sort numbers manually and clear any channels you do not wish
to watch.
1
Press the MENU (
Result:
TV
Channel
Country
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
) button.
The main menu is displayed.
Move
2
TV
) button.
) button again.
The available countries are listed.
Select your Country by pressing the … or † button.
➢
If you have selected the Others option but do not wish to
scan the PAL frequency range, store the channels manually
(“Storing Channels Manually” on page 18).
6
Press the ENTER (
7
Press the … or † button to select Auto Store.
Press the ENTER (
) button.
Result:
) button.
The Auto Store menu is displayed.
Move
TV
Press the ENTER (
Result:
➢
: Belgium
Belgium
France
Germany
Italy
Netherlands
Spain
: Off
Enter
The search will end automatically. Channels are sorted
and stored in the order which reflects their position in
the frequency range (with lowest first and highest last).
The programme originally selected is then displayed.
To stop the search before it has finished, press the MENU
(
) or the ENTER (
) button.
Return
: Belgium
: Off
Enter
) button again to start the search.
Auto Store
P 1 C --
40 MHz
0%
Start
Enter
9
Return
Channel
Country
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
Move
8
Enter
Channel
Country
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
The Country is selected.
Press the ENTER (
Result:
5
The Channel menu is displayed.
Press the ENTER (
Result:
4
: Off
Press the … or † button to select Channel.
Result:
3
: Belgium
Return
When the channels have been stored, you can:
◆ Sort them in the order required (“Sorting the Stored
Channels” on page 21).
◆ Clear a channel (“Skipping Unwanted Channels” on page 20).
◆ Fine-tune channel reception if necessary (“Fine Tuning
Channel Reception” on page 25).
◆ Assign a name to the stored channels (“Assigning Names to
Channels” on page 22).
◆ Activate/deactivate the Digital NR (Noise Reduction) feature
(“Using the Digital NR (Noise Reduction) Feature” on page 40).
◆ Activate/deactivate the LNA (Low Noise Amplifier) feature
(“Using the LNA (Low Noise Amplifier) Feature” on page 24).
English - 17
Return
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 18
Storing Channels Manually
TV
You can store television channels, including those received via cable
networks.
Channel
Country
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
When storing channels manually, you can choose:
: Belgium
◆ Whether or not to store each of the channels found.
◆ The programme number of each stored channel which you
wish to identify.
: Off
Move
Enter
Return
1
Press the MENU (
Result:
TV
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
:
:
:
:
:
:
Move
TV
2
P
1
AUTO
BG
C
5
175 MHz
?
Enter
:
:
:
:
:
:
The main menu is displayed.
Press the … or † button to select Channel.
Result:
The Channel menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Manual Store.
Press the ENTER (
) button.
5
If necessary, select the broadcasting standard required.
Press the … or † button to select Colour System.
Press the ENTER (
) button.
6
Select the required colour standard by pressing the … or †
button. Press the ENTER (
) button.
) button.
Return
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
) button.
P
1
AUTO
AUTO
BG PAL
C SECAM
2
48NTSC
MHz4.43
?
Result:
The following options are available.
(depending on the model)
AUTO - PAL - SECAM - NTSC 4.43
Move
TV
Enter
Return
7
Press the … or † button to select Sound System.
Press the ENTER (
) button.
8
Select the required sound standard by pressing the … or †
button. Press the ENTER (
) button.
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
Move
:
:
:
:
:
:
P
1
AUTO
BG BG
C
2
DK
48 MHz
I
?
L
Enter
Result:
The following options are available.
☛
BG - DK - I - L
Return
continued...
English - 18
BN68-00973A-00Eng
9
9/28/05
4:22 PM
Page 19
If you know the number of the channel to be stored, see the
following steps.
TV
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
◆ Press the … or † button to select Channel.
Press the ENTER (
) button.
◆ Press the … or † button to select C (Air channel) or
S (Cable channel).
:
:
:
:
:
:
P
1
AUTO
BG
C
05
175 MHz
?
◆ Press the √ button.
◆ Press the … or † button to select the required number.
Press the ENTER (
) button.
➢
10
If there is abnormal sound or no sound, re-select the
sound standard required.
To assign a programme number to a channel, select Programme
by pressing the … or † button. Press the ENTER (
) button.
Press the … or † button until you find the correct number.
Press the ENTER (
) button.
13
To store the channel and associated programme number, select
Store by pressing the … or † button. Set to OK by pressing the
ENTER (
) button.
14
Repeat steps 9 to 13 for each channel to be stored.
15
Press the EXIT button to exit.
Enter
Return
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
12
☛
TV
If you do not know the channel numbers, select Search by
pressing the … or † button. Press the ENTER (
) button.
Press the … or † button to start the search.
Press the ENTER (
) button.
Result:
11
Adjust
:
:
:
:
:
:
Adjust
TV
P
1
AUTO
BG
C
5
175 MHz
?
Enter
Return
Manual Store
Programme
Colour System
Sound System
Channel
Search
Store
Move
:
:
:
:
:
:
P
1
AUTO
BG
C
5
175 MHz
OK
Enter
Channel mode
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to P99. You can select a
channel by entering the position number in this mode.
◆ C (Air channel mode): You can select a channel by entering
the assigned number to each air broadcasting station in this
mode.
◆ S (Cable channel mode): You can select a channel by entering
the assigned number for each cable channel in this mode.
..
English - 19
Return
BN68-00973A-00Eng
10/13/05
9:54 AM
Page 20
Skipping Unwanted Channels
TV
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those that you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
Channel
Country
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
Move
: Belgium
1
: Off
Press the MENU (
Result:
Enter
) button.
The main menu is displayed.
Return
2
Press the … or † button to select Channel.
Result:
Add/Delete
The Channel menu is displayed.
P 1 Not in Memory
3
Press the ENTER (
Add
4
Press the … or † button to select Add/Delete.
Press the ENTER (
) button.
Change
Enter
Return
Result:
Add/Delete
P 1 In Memory
Enter
English - 20
Return
The Add/Delete menu is displayed with the current
channel selected.
5
Press the P
or
button on the remote control to delete or add
the required channel.
Press the ENTER (
) button.
6
Repeat step 5 for each channel to be deleted or added.
7
Press the EXIT button to exit.
Delete
Change
) button.
T
st
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 21
Sorting the Stored Channels
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto store.
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
The Channel menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Sort.
Press the ENTER (
) button.
Select the channel that you wish to move by pressing the … or †
button. Press the ENTER (
) button.
6
Select the number of the programme to which the channel is to
be moved by pressing the … or † button.
Press the ENTER (
) button.
8
Move
: Belgium
: Off
Enter
Return
) button.
5
Result:
Channel
Country
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
Press the … or † button to select Channel.
Result:
7
TV
The channel is moved to its new position and all other
channels are shifted accordingly.
Repeat steps 5 to 6 until you have moved all the channels to the
required programme numbers.
Press the EXIT button to exit.
TV
Sort
Prog.
Channel Name
0
C --
1
2
3
4
C7
C 19
C 25
C 26
Move
TV
Enter
Return
Sort
Prog.
Channel Name
0
C --
2
3
4
C 19
C 25
C 26
C7
Move
Enter
English - 21
Return
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 22
Assigning Names to Channels
TV
Channel names will be assigned automatically when channel information is
broadcast. These names can be changed, allowing you to assign new
names.
Channel
Country
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
: Belgium
1
Result:
2
: Off
Move
TV
Press the MENU (
Enter
Return
) button.
The main menu is displayed.
Press the … or † button to select Channel.
Result:
The Channel menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Name.
Press the ENTER (
) button.
) button.
Name
Prog.
0
1
2
3
4
Channel
C --
Name
---------------------
C7
C 19
C 25
C 26
Result:
5
Move
Enter
Return
Press the … or † button to select the channel to be assigned to a
new name. Press the ENTER (
) button.
Result:
TV
Name
Prog.
0
1
2
3
4
Channel
C --
Name
-----
C7
C 19
C 25
C 26
A
-------------
Move
Adjust
English - 22
The Name menu is displayed with the current channel
selected.
Arrow indications are displayed around the name box.
6
Press the … or † button to select a letter (A~Z), a number (0~9),
or a symbol. Move on to the previous or next letter by pressing the
œ or √ button.
7
Press the ENTER (
8
Repeat steps 5 to 7 for each channel to be assigned to a new
name.
9
Press the EXIT button to exit.
) button.
Return
T
fr
C
co
aw
s
a
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 23
Locking the Channel
This feature allows you to prevent unauthorized users, such as children,
from watching unsuitable programmes by muting out video and audio.
Child Lock cannot be released using front panel buttons. Only remote
control can release the Child Lock setting, so keep the remote control
away from children.
1
Press the MENU (
Result:
TV
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
) button.
The main menu is displayed.
Move
English
Off
Off
Off
Enter
Return
Press the … or † button to select Setup.
2
Result:
The Setup menu is displayed.
TV
3
Press the ENTER (
4
Press the … or † button to select Child Lock.
Press the ENTER (
) button.
5
Press the ENTER ( ) button again.
Select On by pressing the … or † button.
Press the ENTER (
) button.
) button.
Move
Press the … or † button to select Programme.
Press the ENTER (
) button.
6
e
Child Lock
Child Lock
Programme
Lock
7
Select the number of programme to which the channel is to be
locked by pressing the … or † button.
Press the ENTER (
) button.
8
Press the … or † button to select Lock.
Select Locked by pressing the ENTER (
TV
: On
:
01
:?
Enter
Return
The selected channel is locked and marked with the
symbol.
Press the EXIT button to exit.
➢
Return
) button.
TV
9
Enter
Child Lock
Child Lock
Programme
Lock
Adjust
Result:
: Off
:P 1
:?
Child Lock
Child Lock
Programme
Lock
◆ A Blue screen is displayed when the Child Lock is
activated.
◆ To unlock the Channel lock, press the ENTER (
)
button again. The locked channel is unlocked.
◆ When a channel is locked, the channel is marked with
the
symbol on the left side in the Channel OSD (On
Screen Display).
Move
: On
:P 1
: Locked
Enter
P 1
Mono
English - 23
Return
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 24
Using the LNA (Low Noise Amplifier) Feature
TV
This function is very useful in the situation that the TV is used in weak
signal. LNA amplifies the TV signal in the weak signal area, a low-noise
preamplifier boosts the incoming signal.
Channel
Country
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
Move
TV
: Belgium
1
Result:
Enter
Return
Move
: Belgium
) button.
The main menu is displayed.
Press the … or † button to select Channel.
2
: Off
Channel
Country
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
Press the MENU (
If
as
If
ch
Result:
The Channel menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select LNA.
Press the ENTER (
) button.
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
6
Press the EXIT button to exit.
) button.
Off
: Off
Enter
On
Return
➢
◆ If the picture is noisy with the LNA set to On, select Off.
◆ LNA setting is to be made for each channel.
Y
se
co
T
English - 24
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 25
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
1
Press the MENU (
Result:
TV
Channel
Country
Auto Store
Manual Store
Add/Delete
Sort
Name
Fine Tune
LNA
) button.
The main menu is displayed.
: Belgium
: Off
Move
Enter
Return
Press the … or † button to select Channel.
2
Result:
3
The Channel menu is displayed.
Press the ENTER (
Fine Tune
P 1
0
) button.
Reset
Press the … or † button to select Fine Tune.
Press the ENTER (
) button.
4
Result:
5
The programme number changes to Red and is
marked with a “*”.
7
To reset the fine tuning to 0, select Reset by pressing the … or †
button. Press the ENTER (
) button.
8
Press the EXIT button to exit.
P 1
3
Reset
Adjust
➢
If you are unable to fine tune a channel, check that the
Colour System and Sound System settings are correct.
Save
Return
Fine Tune
P 1 *
3
Reset
Adjust
➢
Return
Fine Tune
To store the fine tuning setting in the TV’s memory, press the
ENTER (
) button.
Result:
Save
The horizontal bar is displayed.
To obtain a sharp and clear picture and good sound quality,
press the œ or √ button until you reach the optimal setting.
6
Adjust
Save
P 1*
Mono
Fine Tune Store will change the colour of the Channel OSD (On
Screen Display) from White to Red and add the “*” mark.
Displaying Information
You can view the channel information and setting status you have
selected by pressing the “INFO (
)” button on the remote
control.
The information displayed varies according to the selected source.
P 1
Mono
Picture
Sound
SRS TSXT
12 : 00
: Dynamic
: Custom
: Off
English - 25
Return
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 26
Changing the Picture Standard
TV
You can select the type of picture which best corresponds to your
viewing requirements.
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Energy Saving
:
PIP
Move
Dynamic
Auto Wide
On
Off
Press the MENU (
Result:
Result:
Return
3
Mode
Mode
Contrast
Brightness
Sharpness
Colour
Tint
G 50
Colour Tone
Reset
Move
TV
4
: Dynamic
100
50
75
55
R 50
Move
The Picture menu is displayed.
Result:
5
Result:
) button again.
The Mode menu is displayed.
Press the ENTER (
: Cool2
) button.
The Mode is selected.
Press the ENTER (
) button.
The following options are available.
Dynamic - Standard - Movie - Custom
Enter
➢
Return
: Dynamic
Dynamic
Standard 100
Movie 50
Custom 75
55
R 50
: Cool2
Enter
Return
◆ Choose Movie when viewing the movie.
◆ Choose Custom if you want to adjust the settings
according to personal preference (see “Customizing the
Picture Settings”, page 27).
6
Select the required option by pressing the … or † button.
Press the ENTER (
) button.
7
Press the EXIT button to exit.
➢
English - 26
◆ Choose Dynamic for viewing the TV during the day or
when there is bright light in the room.
◆ Choose Standard for the standard factory settings.
Mode
Mode
Contrast
Brightness
Sharpness
Colour
Tint
G 50
Colour Tone
Reset
The main menu is displayed.
Press the ENTER (
Result:
TV
) button.
Press the … or † button to select Picture.
2
Standard
Enter
1
You can also set these options simply by pressing the
P.MODE (
: Picture Mode) button on the remote control.
Y
th
BN68-00973A-00Eng
10/13/05
9:54 AM
Page 27
Customizing the Picture Settings
Your television has several setting options that allow you to control
the picture quality.
1
Press the MENU (
) button.
The main menu is displayed.
Result:
2
Press the … or † button to select Picture.
Result:
The Picture menu is displayed.
3
Press the ENTER (
) button.
Result:
The Mode is selected.
4
Press the ENTER (
) button again.
Result:
The Mode menu is displayed.
5
TV
Move
TV
Dynamic - Standard - Movie - Custom
Select the required option by pressing the … or † button.
7
Press the ENTER (
8
Select the required option by pressing the … or † button.
Result:
The following options are available.
9
11
Contrast - Brightness - Sharpness - Colour Tint (NTSC only)
◆
Contrast - Brightness : PC Mode.
Cool 2 - Cool 1 - Normal - Warm 1 - Warm 2
12
Press the ENTER (
13
To return the factory defaults, select Reset by pressing the … or
† button. Press the ENTER (
) button.
The previously adjusted settings will be reset to the
Result:
factory defaults.
➢
➢
14
) button.
Return
: Custom
80
50
50
50
R 50
: Normal
Enter
Return
Mode
Mode
Contrast
Brightness
Sharpness
Colour
Tint
G 50
Colour Tone
Reset
◆ The settings values may vary depending on the input
source. (ex. RF, Video, Component, PC, or HDMI.)
Select the required option by pressing the … or † button.
Result:
The following options are available.
Enter
80
TV
◆ Press the … or † button to select other option(s).
Press the MENU ( ) button to return to Mode menu.
Press the … or † button to select Colour Tone.
) button.
Press the ENTER (
Standard
Contrast
Press the ENTER (
) button.
The horizontal bar is displayed.
Result:
Press the œ or √ button until you reach the optimal
setting.
➢
10
Move
) button.
◆
Dynamic
Auto Wide
On
Off
Mode
Mode
Contrast
Brightness
Sharpness
Colour
Tint
G 50
Colour Tone
Reset
Press the ENTER (
) button.
The following options are available.
Result:
6
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Energy Saving
:
PIP
Move
TV
: Custom
80
Cool 2 50
Cool 1 50
Normal 50
Warm 1R 50
: Normal
Warm 2
Enter
Return
Mode
Mode
Contrast
Brightness
Sharpness
Colour
Tint
G 50
Colour Tone
Reset
Move
: Custom
80
50
50
50
R 50
: Normal
Enter
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
The reset function is also set for each Colour Tone (Cool 2,
Cool 1, Normal, Warm 1, or Warm 2).
Press the EXIT button to exit.
English - 27
Return
BN68-00973A-00Eng
9/28/05
4:22 PM
Page 28
Setting the Picture (PC Mode)
➢
1
TV
Preset to the PC mode by pressing the SOURCE (
Press the MENU (
) button.
) button.
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
Move
Result:
English
Press the … or † button to select Setup.
Result:
Off
Off
Off
Enter
TV
2
Return
The main menu is displayed.
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select PC.
Press the ENTER (
) button.
Result:
PC
) button.
The PC menu is displayed.
Image Lock
Position
5
Press the ENTER (
Auto adjustment
Image Reset
6
Press the … or † button to select the option (Coarse or Fine) to
be adjusted. Press the ENTER (
) button.
Result:
Move
TV
Enter
Return
➢
Image Lock
Coarse
50
Fine
0
➢
Move
Enter
Return
The horizontal bar is displayed.
Press the œ or √ button until you reach the optimal
setting.
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again. After the noise has been reduced, re-adjust the
picture so that it is aligned on the center of screen.
Press the … or † button to select other option(s).
7
Press the ENTER (
8
Press the MENU (
Result:
Coarse
) button to select Image Lock.
) button.
) button.
The PC menu is displayed again.
50
9
TV
Press the … or † button to select Position.
Press the ENTER (
) button.
➢
PC
Image Lock
Adjust the PC’s screen positioning if it does not fit the TV
screen.
Position
Auto adjustment
Image Reset
Move
TV
Enter
10
Adjust the position by pressing the …, †, œ, or √ button.
11
Press the ENTER (
) button.
Return
Position
Move
Enter
Return
continued...
English - 28
BN68-00973A-00Eng
12
Page 29
TV
PC
Image Lock
The screen quality and position are automatically reset.
The settings are all finished, and the TV will
automatically return to the previous picture.
Position
Auto adjustment
Image Reset
To return the factory defaults, select Image Reset by pressing
the … or † button. Press the ENTER (
) button.
Result:
14
4:22 PM
Press the … or † button to select Auto adjustment.
Press the ENTER (
) button.
Result:
13
9/28/05
The previously adjusted settings will be reset to the
factory defaults.
Move
Enter
Return
Press the EXIT button to exit.
Auto Adjustment in progress
Please wait
TV
PC
Image Lock
Position
Auto adjustment
Image Reset
Move
Enter
Image Reset has completed.
Return
..
English - 29
Return
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 30
Selecting the Picture Size
TV
You can select the picture size which best corresponds to your viewing
requirements.
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Energy Saving
:
PIP
Move
TV
Dynamic
Auto Wide
On
Off
1
Press the MENU (
) button.
Result:
The main menu is displayed.
Standard
2
Press the … or † button to select Picture.
Result:
The Picture menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Size.
) button.
Press the ENTER (
5
Select the required option by pressing the … or † button.
Result:
The following options are available.
◆ Auto Wide : Expanding and pulling up the picture from 4:3
to 16:9 ratio.
◆ 16:9
: Sets the picture to 16:9 wide mode.
◆ Wide 4:3 : Magnify the size of the picture more than 4:3.
Move the screen up/down using the … or †
button after selecting the
by pressing the √
or ENTER (
) button.
◆ Panorama : Sets the picture to the wide aspect ratio of a
panoramic picture.
◆ Zoom
: Magnify the size of the picture vertically on
screen.
◆ 4:3
: Sets the picture to 4:3 normal mode.
6
When you are satisfied with your setting, press the ENTER (
button.
7
Press the EXIT button to exit.
Enter
Return
Size
Auto Wide
16:9
Wide 4:3
Panorama
Zoom
4:3
Move
Enter
Return
PC to HDMI Mode
TV
Size
Auto Wide
16:9
Wide 4:3
Panorama
Zoom
4:3
Move
T
q
If
n
th
Enter
) button.
)
Return
➢
◆ You can select these options simply by pressing the P.SIZE
button on the remote control.
◆ If you change the picture size when PIP is On, PIP will
automatically be turned Off.
◆ Depending on the input source, the P.SIZE options may vary.
◆ In TV, COMPONENT(720p, 1080i), PC, HDMI modes, only
16:9 & 4:3 modes can be selected.
◆ Supported screen resolution modes may differ depending on
the model of the product.
Positioning and Sizing the screen using Zoom
➢
English - 30
◆ Resizing the screen using the Zoom enables the positioning
and sizing of the screen to up/down direction using the … or
† button as well as the screen size.
◆ Move the screen up/down using the … or † button after
selecting the
by pressing the œ or √ button.
◆ Resize the screen vertically using the … or † button after
selecting the
by pressing the œ or √ button.
(Pressing the … button extends it upward and pressing the
† button extends it downward.)
◆ Screen enlargement operates only in TV/Video/S-Video input
modes.
◆ PC/HDMI modes prevent the screen enlargement function.
Y
si
v
BN68-00973A-00Eng
4:23 PM
Page 31
Viewing the DNIe Demonstration
This TV includes the DNIe function so as to provide a high visual
quality.
If you set DNIe Demo to On, you can view an applied DNIe and a
normal picture on the screen, for demonstration purposes. Using
this function, you can view the difference in the visual quality.
1
Press the MENU (
Result:
TV
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Energy Saving
:
PIP
) button.
Dynamic
Auto Wide
On
Off
Standard
The main menu is displayed.
Move
Enter
Return
Press the … or † button to select Picture.
2
Result:
The Picture menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select DNIe Demo.
Press the ENTER (
) button.
TV
) button.
Result:
The following options are available.
◆
◆
: Switches on the DNIe Demo mode.
: Switches off the DNIe Demo mode.
6
On
Off
When you are satisfied with your setting, press the ENTER (
button.
7
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Energy Saving
:
PIP
Select Off or On by pressing the … or † button.
5
√
.
9/28/05
Move
Dynamic
Auto Wide
On
Off Off
On
Standard
Enter
DNIe Demo
)
DNIe Off
DNIe On
Press the EXIT button to exit.
➢
DNIeTM (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise
reduction, detail enhancement, contrast enhancement and
white enhancement. New image compensation Algorithm
gives brighter, clearer, more detailed image to you.
DNIeTM technology will fit every signal into your eyes.
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL” button. To return to normal
viewing, press it again.
➢
➢
Return
In the PIP mode, the main and sub pictures are stilled at
the same time.
To prevent screen burn-in, this function will automatically
cancel after 5 minutes.
t
English - 31
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 32
Setting the My Colour Control (Easy Control)
TV
This feature allows you to adjust colours according to your preferences, by
adjusting skin, sky, and grass tones using the predefined settings (Blue,
Green, Pink, Standard, and Custom) without affecting other colours on
the screen.
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Energy Saving
:
PIP
Move
Dynamic
Auto Wide
On
Off
1
Press the MENU (
Result:
Enter
Return
My Colour Control
Easy Control
Detail Control
: Custom
Press the ENTER (
4
Press the … or † button to select My Colour Control.
Press the ENTER (
) button.
5
Enter
➢
) button.
The Easy Control is selected.
Press the ENTER (
Return
) button again.
The current image will be displayed on the screen.
Result:
Original
The Picture menu is displayed.
3
Result:
Move
The main menu is displayed.
Press the … or † button to select Picture.
2
Result:
TV
) button.
Standard
The following options are available.
◆ Blue
Emphasizing clear blues.
Blue
◆ Green
Emphasizing mild greens.
◆ Pink
Emphasizing warm skin colours.
Easy Control
Blue
Move
Green
Enter
Pink
√
Return
◆ Standard
Standard picture.
◆ Custom
Changing the settings in the Detail Control
menu will automatically set to Custom (see next
page).
Select the required option by pressing the œ or √ button.
6
Result:
The original picture (before adjustment) is shown on
the left side, while the selected mode is shown on the
right side.
7
When you are satisfied with your setting, press the ENTER (
button.
8
Press the EXIT button to exit.
➢
)
◆ The My Color Control is not available in PC mode.
◆ When running the My Colour Control feature, the current
picture is captured as a still image before being displayed on
the screen.
◆ You cannot use this function, when PIP is On.
English - 32
T
y
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 33
Setting the My Colour Control (Detail Control)
This setting can be adjusted to suit your personal preferences.
TV
1
Press the MENU (
Result:
2
The main menu is displayed.
Press the … or † button to select Picture.
Result:
The Picture menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select My Colour Control.
Press the ENTER (
) button.
Press the … or † button to select Detail Control.
Press the ENTER (
) button.
6
Select the required option (Pink, Green, or Blue) by pressing the
▲ or ▼ button. Press the ENTER (
) button.
7
Press the œ or √ button until you reach the optimal setting.
Result:
➢
Press the MENU (
Dynamic
Auto Wide
On
Off
Standard
Enter
Return
My Colour Control
Easy Control
Detail Control
Move
TV
: Custom
Enter
Return
Detail Control
Pink
Green
Blue
Reset
) button.
50
50
50
The Detail Control menu is displayed again.
To return the factory defaults, select Reset by pressing the
▲ or ▼ button. Press the ENTER (
) button.
Result:
10
Changing the adjustment value will refresh the
adjusted screen.
TV
Press the ▲ or ▼ button to select other option(s).
Result:
9
Move
) button.
5
8
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Energy Saving
:
PIP
) button.
Move
Enter
Return
The previously adjusted colours will be reset to the
factory defaults.
Press the EXIT button to exit.
Original
Adjusted
Detail Control
Pink
50
Adjust
Move
TV
Return
Detail Control
Pink
Green
Blue
Reset
50
50
50
Move
Enter
English - 33
Return
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 34
Setting the Blue Screen
TV
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to
continue viewing the poor picture, you must set the Blue Screen mode to
Off.
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
Move
English
1
Off
Off
Off
Press the MENU (
Result:
Enter
Return
Press the … or † button to select Setup.
2
Result:
TV
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
Move
English
Off
Off
Off
Enter
Off
On
Return
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Blue Screen.
Press the ENTER (
) button.
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
6
Press the EXIT button to exit.
➢
English - 34
) button.
The main menu is displayed.
) button.
Blue Screen is displayed while there is no signal from the
external device in the external mode, regardless of the Blue
Screen Setting.
T
ac
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 35
Using the Colour Weakness Enhancement Feature
This feature adjusts the red, green, or blue colour to enhance the picture
according to the user's particular colour weakness.
1
Press the MENU (
Result:
2
TV
) button.
The main menu is displayed.
Press the … or † button to select Setup.
Result:
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Colour Weakness.
Press the ENTER (
) button.
Result:
TV
Off
Off
Off
Enter
Return
6
Select the required option (Red, Green, or Blue) by pressing the
▲ or ▼ button. Press the ENTER (
) button.
Move
TV
The horizontal bar is displayed.
Press the œ or √ button until you reach the optimal
setting.
When you are satisfied with your setting, press the ENTER (
button.
8
Press the EXIT button to exit.
Enter
0
0
0
Return
Colour Weakness
Colour Weakness : On
Red
Green
Blue
Press the … or † button to select other option(s).
7
Colour Weakness
Colour Weakness : Off Off
On
Red
Green
Blue
The Colour Weakness menu is selected.
Press the ENTER (
) button again.
Press the … or † button to select On.
Press the ENTER (
) button.
➢
Move
English
) button.
5
Result:
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
0
0
0
)
Move
Enter
Return
Colour Weakness
Red
Move
0
Adjust
Return
English - 35
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 36
Using the Energy Saving Feature
TV
This feature adjusts the screen brightness automatically depending on the
surrounding lighting conditions.
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Energy Saving
:
PIP
Move
TV
Dynamic
Auto Wide
On
Off
Standard
Enter
Move
Press the MENU (
Result:
Dynamic
Auto Wide
On
Off
Result:
The Picture menu is displayed.
Press the ENTER (
4
Press the … or † button to select Energy Saving.
Press the ENTER (
) button.
5
Select the required option by pressing the … or † button.
Result:
) button.
The following options are available.
◆ Auto Saving: Automatically adjusts to the
surrounding illumination.
◆ Standard: Operates in standard mode regardless
of the surrounding illumination.
◆ Super Saving: Enters maximum power saving
mode regardless of the surrounding illumination.
Return
6
When you are satisfied with your setting, press the ENTER (
button.
7
Press the EXIT button to exit.
➢
English - 36
The main menu is displayed.
3
Standard
Auto Saving
Standard
Super Saving
Enter
) button.
Press the … or † button to select Picture.
2
Return
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Energy Saving
:
PIP
1
You can select these options by simply pressing the E.SAVING
button on the remote control.
)
Y
ex
co
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 37
Viewing the Picture in Picture (PIP)
You can display a sub picture within the main picture of a TV program or
external A/V devices. In this way you can monitor the video input from any
connected devices while watching TV or other video input.
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the ENTER (
4
Press the … or † button to select PIP.
Press the ENTER (
) button.
Result:
s
TV
) button.
Move
TV
Press the … or † button to select Source.
Press the ENTER (
) button.
7
8
The same source cannot be selected on both the main and
sub screens. However, the same source can be selected on
both the main and sub screens for TV.
9
The following options are available.
-
10
Return
Move
Enter
TV
Ext.1
:
:
:P
Ext.2
AV1
1
AV2
Return
PIP
: On
: Ext.1
:
:
:P
1
Enter
Return
The main picture and sub picture are interchanged.
Press the … or † button to select Size.
Press the ENTER (
) button.
➢
1
Enter
: On
: TV
Move
You cannot use the Swap function for PC, HDMI or
Component.
Result:
:
:
:P
PIP
PIP
Source
Swap
Size
Position
Programme
Press the … or † button to select Swap.
Press the ENTER (
) button.
➢
Return
: On Off
: TV On
PIP
Source
Swap
Size
Position
Programme
TV
Select a source of the sub picture by pressing the … or † button.
Press the ENTER (
) button.
Result:
Enter
The following options are available.
TV - Ext.1 - Ext.2 - AV1 - AV2 - S-Video1
- S-Video2
➢
Standard
The PIP is selected.
You can select these options by simply pressing the PIP
button on the remote control.
Result:
Dynamic
Auto Wide
On
Off
PIP
PIP
Source
Swap
Size
Position
Programme
Press the ENTER (
) button again.
To activate, set PIP to on by pressing the … or † button.
Press the ENTER (
) button.
➢
6
Move
The Picture menu is displayed.
3
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Energy Saving
:
PIP
Press the … or † button to select Picture.
Result:
5
TV
TV
PIP
PIP
Source
Swap
Size
Position
Programme
: On
: Ext.1
:
:
:P
1
-
You cannot use the size function for PC or HDMI mode.
Move
Enter
Select a size of the sub picture by pressing the … or † button.
Press the ENTER (
) button.
continued...
English - 37
Return
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 38
Ea
TV
11
PIP
PIP
Source
Swap
Size
Position
Programme
Move
TV
: On
: Ext.1
:
:
:P
Result:
➢
1
Enter
Return
PIP
PIP
Source
Swap
Size
Position
Programme
Adjust
: On
: Ext.1
:
:
:
Enter
Press the … or † button to select Position.
Press the ENTER (
) button.
B
The following options are available.
-
P
The Position menu is available when the Size is
mode.
12
Select a position of the sub picture by pressing the … or †
button. Press the ENTER (
) button.
13
Press the … or † button to select Programme.
Press the ENTER (
) button.
14
Select the channel that you want to view through sub picture by
pressing the … or † button.
➢
01
Return
S
S
P
T
Su
If the sub picture receives no signal and the main picture is
output from a Component, PC or HDMI signal, the sub
picture will be blue. If the main picture is output from a Video
signal, the sub picture will be black.
TV
Ex
Ex
A
A
S-
15
16
When you are satisfied with your setting, press the ENTER (
button.
)
Co
Co
PC
Press the EXIT button to exit.
H
continued...
English - 38
S-
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 39
Easy functions of the remote control.
Buttons
Feature
PIP
Used to activate or deactivate the PIP function directly.
SOURCE
Used to assign a source of the sub picture (TV, Ext.1,
Ext.2, AV1, AV2, S-Video1, or S-Video2).
SIZE
Used to select a size of the sub picture (
P
/
o
Main
, or
).
Used to select a channel of the sub picture.
Table of PIP Settings
Sub
,
TV
X - This PIP combination is not available.
O - This PIP combination is available.
Ext.1 Ext.2 AV1 AV2 S-Video1 S-Video2 Component1 Component2
PC
HDMI
TV
O
O
O
O
O
O
O
O
O
O
O
Ext.1
O
X
O
O
O
O
O
O
O
O
O
Ext.2
O
O
X
O
O
O
O
O
O
O
O
AV1
O
O
O
X
O
X
O
O
O
O
O
AV2
O
O
O
O
X
O
X
O
O
O
O
S-Video1
O
O
O
O
O
X
O
O
O
O
O
S-Video2
O
O
O
O
X
O
X
O
O
O
O
Component1
X
X
X
X
X
X
X
X
X
X
X
Component2
X
X
X
X
X
X
X
X
X
X
X
PC
X
X
X
X
X
X
X
X
X
X
X
HDMI
X
X
X
X
X
X
X
X
X
X
X
..
English - 39
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 40
Using the Digital NR (Noise Reduction) Feature
TV
If the signal received by your television is weak, you can activate this
feature to help reduce any static and ghosting that may appear on the
screen.
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Energy Saving
:
PIP
Dynamic
Auto Wide
On
Off
1
Result:
Standard
2
Move
TV
Enter
Return
Picture
Mode
:
Size
:
Digital NR
:
DNIe Demo
:
My Colour Control
Energy Saving
:
PIP
Move
Dynamic
Auto Wide
On Off
Off On
English - 40
Return
) button.
The main menu is displayed.
Press the … or † button to select Picture.
Result:
The Picture menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Digital NR.
Press the ENTER (
) button.
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
6
Press the EXIT button to exit.
Standard
Enter
Press the MENU (
) button.
T
sc
se
(H
b
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 41
Preventing Screen Burn-in
To reduce the possibility of screen burn, this unit is equipped with
screen burn prevention technology. This technology enables you to
set picture movement up/down (Vertical Line) and side to side
(Horizontal Dot). The Time setting allows you to program the time
between movement of the picture in minutes.
1
Press the MENU (
Result:
2
TV
) button.
The main menu is displayed.
Move
Press the … or † button to select Setup.
Result:
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
TV
Press the ENTER (
4
Press the … or † button to select Screen Burn Protection.
Press the ENTER (
) button.
5
6
) button.
Setup
Move
Enter
8
TV
Screen Burn Protection
Pixel Shift
All White
Signal Pattern
Pixel Shift: Using this function, you can minutely move
pixels on the PDP in horizontal or vertical direction to
minimize after image on the screen.
Select the required option (Horizontal Dot, Vertical Line, or
Time) by pressing the … or † button.
Press the ENTER (
) button.
Press the … or † button until you reach the optimal setting.
Press the ENTER (
) button.
➢
9
Return
The Pixel Shift menu is selected.
Move
7
Return
More
PC
AV Setup
Screen Burn Protection
) button again.
Press the ENTER (
) button.
Select On by pressing the … or † button for making the screen
move per regular hour and preventing the residual image.
Press the ENTER ( ) button.
➢
Enter
The Screen Burn Protection menu is displayed with
the Pixel Shift selected.
Press the ENTER (
Result:
Off
Off
Off
The Setup menu is displayed.
3
Result:
English
Optimum condition for pixel shift;
Horizontal Dot
4
Vertical Line
1
Time(minute)
4
TV
Enter
Return
Pixel Shift
Pixel Shift
Horizontal Dot
Vertical Line
Time
Move
:
:
:
:
On
4
1
4
Enter
Press the EXIT button to exit.
English - 41
Off
On
Return
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 42
Reducing the Effects of Screen Burn
If screen burn has occurred, you can select a white screen or signal
pattern (rolling screen) to help remove screen burn artifacts.
TV
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
Move
TV
English
1
Result:
Off
Off
Off
Enter
Press the MENU (
Result:
3
Press the ENTER (
4
Press the … or † button to select Screen Burn Protection.
Press the ENTER (
) button.
Result:
➢
Return
Screen Burn Protection
➢
Pixel Shift
All White
Signal Pattern
6
Move
TV
Enter
Screen Burn Protection
➢
➢
Move
Enter
English - 42
Return
The Screen Burn Protection menu is displayed.
All White: This function helps remove after images on the
screen by changing the colour of pixels to white. Use this
function when there are remaining after images or symbols
on the screen especially when you displayed a still image
on the screen for a long time.
Signal Pattern: This function helps remove after images
on the screen by moving all the pixels on the PDP according
to a pattern. Use this function when there are remaining
after images or symbols on the screen especially when you
displayed a still image on the screen for a long time.
Press any button on the remote control to cancel the currently
selected function.
Return
Pixel Shift
All White
Signal Pattern
) button.
Press the … or † button to select the option (All White or
Signal Pattern). Press the ENTER (
) button.
5
TV
The Setup menu is displayed.
Return
Setup
Enter
The main menu is displayed.
Press the … or † button to select Setup.
2
More
PC
AV Setup
Screen Burn Protection
Move
) button.
To remove after images on the screen, use either “All White” or
“Signal Pattern” function.
Although both of the two functions remove after images on the
screen, “Signal Pattern” is more effective.
The after image removal function has to be executed for a long
time (approximately 1 hour) to effectively remove after images on
the screen.
If after image is not improved after the execution of the function,
repeat the function again.
Y
w
l
BN68-00973A-00Eng
4:23 PM
Page 43
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
1
Press the MENU (
Result:
TV
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
) button.
The main menu is displayed.
: Custom
: Off
: Off
: Off
Press the ▲ or ▼ button to select Sound.
2
Result:
3
The Sound menu is displayed.
Press the ENTER (
Result:
The Mode is selected.
Press the ENTER (
5
Select the required option by pressing the ▲ or ▼ button.
Result:
Move
Enter
Return
) button.
4
TV
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
) button again.
The following options are available.
: Standard
Standard
Music
: OffMovie
: OffSpeech
: Off
Custom
Standard - Music - Movie - Speech - Custom
e
➢
◆ Choose Standard for the standard factory settings.
Move
Enter
◆ Choose Music when watching music videos or concerts.
◆ Choose Movie when watching movies.
◆ Choose Speech when watching a show that is mostly
dialog (i.e., news).
g
r
9/28/05
◆ Choose Custom to recall your personalized settings
(see “Customizing the Sound Settings”, page 44).
6
When you are satisfied with your setting, press the ENTER (
button.
7
Press the EXIT button to exit.
)
Custom
➢
You can select these options by simply pressing the
S.MODE (Sound Mode) button on the remote control.
n
English - 43
Return
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 44
Customizing the Sound Settings
TV
Your television has several settings which allow you to control the
sound quality.
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
: Custom
1
: Off
: Off
: Off
Press the MENU (
Result:
Enter
R
L
Balance
Move
The Sound menu is displayed.
Return
Equalizer
TV
The main menu is displayed.
Press the … or † button to select Sound.
2
Result:
Move
) button.
Tr
m
su
in
+
+
0
0
-
-
3
Press the ENTER (
4
Press the … or † button to select Equalizer.
Press the ENTER (
) button.
Result:
) button.
The Equalizer menu is displayed.
5
Select the required option (balance or equalizer) by pressing the
œ or √ button.
6
Press the … or † button until you reach the optimal setting.
Press the ENTER (
) button.
7
Press the EXIT button to exit.
100Hz 300Hz 1KHz 3KHz 10KHz
Adjust
Return
➢
◆ If you make any changes to the sound settings, the sound
standard is automatically switched to Custom.
➢
◆ L/R Sound Balance Adjustment
To adjust the sound balance of the L/R speakers.
◆ Bandwidth Adjustment (100Hz, 300Hz, 1KHz, 3KHz, 10KHz)
To adjust the level of different bandwidth frequencies.
Ea
is
c
th
m
th
English - 44
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 45
Setting the TruSurround XT
TruSurround XT is a patented SRS technology that solves the of playing 5.1
multichannel content over two speakers. TruSurround delivers a compelling, virtual
surround sound experience through any two-speaker playback system, including
internal television speakers. It is fully compatible with all multichannel formats.
1
Press the MENU (
) button.
Result:
The main menu is displayed.
2
Press the … or † button to select Sound.
Result:
The Sound menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select SRS TSXT.
) button.
Press the ENTER (
Select the required option by pressing the … or † button.
Result:
The following options are available.
Off - 3D Mono - Stereo
6
When you are satisfied with your setting, press the ENTER (
button.
7
Press the EXIT button to exit.
➢
z)
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
Move
: Custom
: Off
: Off
: Off
Enter
Return
) button.
5
➢
TV
TV
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
: Custom
: Off Off
: Off3D Mono
: OffStereo
)
Move
Enter
Return
You can select these options simply by pressing the
SRS (
) button on the remote control.
TruSurround XT, SRS and
Symbol are
trademarks of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from
SRS Labs, Inc.
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it
is not easy for you to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of
the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when
the modulation signal is low.
1
2
Press the … or † button to select Sound.
The Sound menu is displayed.
Result:
Press the ENTER (
4
Press the … or † button to select Auto Volume.
Press the ENTER (
) button.
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
) button.
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
Press the MENU (
) button.
The main menu is displayed.
Result:
3
6
TV
Move
TV
: Custom
: Off
: Off
: Off
Enter
Return
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
Move
: Custom
: Off
: Off Off
: Off On
Enter
Press the EXIT button to exit.
English - 45
Return
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 46
Selecting the Internal Mute
TV
If you want to hear the sound through separate speakers,
cancel the internal amplifier.
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
: Custom
1
Press the MENU (
: Off
: Off
: Off
Result:
Result:
Enter
TV
Move
The Sound menu is displayed.
Return
3
Press the ENTER (
4
Press the … or † button to select Internal Mute.
Press the ENTER (
) button.
: Off
: Off
: Off Off
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
On
6
Press the EXIT button to exit.
Sound
Mode
Equalizer
SRS TSXT
Auto Volume
Internal Mute
The main menu is displayed.
Press the … or † button to select Sound.
2
Move
) button.
: Custom
Enter
Return
➢
) button.
The VOL +, VOL - and Mute buttons do not operate when the
Internal Mute is set to On.
Setting the Melody Sound
TV
Move
TV
English
1
2
Move
Enter
English - 46
Return
The main menu is displayed.
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Melody.
Press the ENTER (
) button.
5
Select Off or On by pressing the … or † button.
Press the ENTER (
) button.
6
Press the EXIT button to exit.
English
Off
On
) button.
Press the … or † button to select Setup.
Result:
Return
Setup
Off
Off
Off
Press the MENU (
Result:
Off
Off
Off
Enter
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
➢
You can hear melody sound when the television is powered on or
off.
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
T
o
a
th
) button.
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 47
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL-I ” or “Stereo”, depending on
the current transmission.
NICAM
Stereo
Type of broadcast
On-screen indication
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular +
NICAM Mono
NICAM Mono ↔ Mono
NICAM stereo
A2
Stereo
NICAM DUAL-I/II
NICAM DUAL-I →
NICAM DUAL-II →
Mono
Regular broadcast
(Standard audio)
Mono
Bilingual or DUAL-I/II
DUAL-I ↔ DUAL-II
Stereo
➢
NICAM stereo ↔ Mono
(Forced mono)
Stereo ↔ Mono
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to Mono.
◆ If the stereo signal is weak and automatic switching
occurs, switch to Mono.
◆ When receiving mono sound in AV mode, connect to the
“AUDIO-L” input connector on the panel (front or side,
depending on the model). If mono sound only comes out
of the left speaker, press the DUAL I-II button.
English - 47
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 48
Setting and Displaying the Current Time
TV
You can set the television’s clock so that the current time is displayed
by pressing the “INFO (
)” button. You must also set the time if
you wish to use the automatic on or off timers.
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
Move
TV
English
1
Off
Off
Off
Result:
Return
Move
TV
12 : 00
: Off
00 : 00 Off
00 : 00 Off
Enter
) button.
The main menu is displayed.
Press the … or † button to select Setup.
2
Enter
Time
Clock Set
Sleep Timer
On Timer
Off Timer
Press the MENU (
Result:
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Time.
Press the ENTER (
) button.
Result:
) button.
The Clock Set is selected.
5
Press the ENTER (
6
Press the œ or √ button to select Hour or Minute.
Set these by pressing the … or † button.
Return
➢
) button again.
You can set the hour and minute directly by pressing
the numeric buttons on the remote control.
Clock Set
Hour
Minute
12
00
7
When you are satisfied with your setting, press the ENTER (
button.
8
Press the EXIT button to exit.
➢
Move
Adjust
English - 48
Return
)
In the event of a power interruption or the set being turned off at
the supply, the settings for the Clock will be lost.
Y
w
d
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 49
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode.
1
Press the MENU (
Result:
TV
) button.
The main menu is displayed.
Press the … or † button to select Setup.
2
Result:
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select Time.
Press the ENTER (
) button.
Result:
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
Move
Off
Off
Off
Enter
Return
) button.
TV
Press the … or † button to select Sleep Timer.
Press the ENTER (
) button.
6
Select the preset time interval (Off, 30, 60, 90, 120, 150, or 180)
for staying on by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
7
Press the EXIT button to exit.
Time
Clock Set
Sleep Timer
On Timer
Off Timer
The Time menu is displayed.
5
◆ You can select these options simply by pressing the
SLEEP button on the remote control.
12 : 00
: Off
00 : 00 Off
00 : 00 Off
Move
TV
➢
English
Enter
Return
Time
Clock Set
Sleep Timer
On Timer
Off Timer
: 00 : 00
Off
: Off
30
: 00 : 00
60Off
: 00 : 00
90Off
120
150
◆ If the sleep timer is not yet set, Off is displayed.
If the sleep timer is already set, the remaining time before
which the television switches to standby mode is displayed.
180
Move
Sleep Timer
Enter
:
Off
English - 49
Return
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 50
Switching the Television On and Off Automatically
You can set the on or off timers so that the television will:
TV
◆ Switch on automatically and tune to the channel of your
choice at the time you select.
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
Move
◆ Switch off automatically at the time you select.
English
➢
Off
Off
Off
1
Enter
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on page 48).
Press the MENU (
Result:
TV
2
Time
Clock Set
Sleep Timer
On Timer
Off Timer
12 : 00
: Off
00 : 00 Off
00 : 00 Off
Move
Enter
Press the ENTER (
4
Press the … or † button to select Time.
Press the ENTER (
) button.
Result:
On Timer
Minute
00
00
6
01
Volume
Activation
10
No
Move
TV
Adjust
On Timer
Hour
Minute
00
00
Programme
01
Volume
Activation
The On Timer menu is displayed.
You can set the hour and minute directly by pressing
the numeric buttons on the remote control.
7
Press the œ or √ button to select Activation.
8
To activate On Timer with the setting entered, select Yes by
pressing the … or † button.
9
Press the ENTER (
Result:
) button.
The Time menu is displayed again.
Yes
10
Move
The Time menu is displayed.
Select Hour, Minute, Programme, or Volume by pressing the œ or √
button.
Set these by pressing the … or † button.
➢
Return
) button.
Press the … or † button to select On Timer.
Press the ENTER (
) button.
Result:
Programme
The Setup menu is displayed.
3
Return
Hour
The main menu is displayed.
Press the … or † button to select Setup.
Result:
5
TV
) button.
Return
Adjust
Return
continued...
English - 50
BN68-00973A-00Eng
10
4:23 PM
Page 51
Press the … or † button to select Off Timer.
Press the ENTER (
) button.
Result:
11
9/28/05
TV
The Off Timer menu is displayed.
Select Hour or Minute by pressing the œ or √ button.
Set these by pressing the … or † button.
➢
Time
Clock Set
Sleep Timer
On Timer
Off Timer
You can set the hour and minute directly by pressing
the numeric buttons on the remote control.
12
Press the œ or √ button to select Activation.
13
To activate Off Timer with the setting entered, select Yes by
pressing the … or † button.
14
When you are satisfied with your setting, press the ENTER (
button.
15
Press the EXIT button to exit.
Move
TV
)
Auto Power Off
When you set the timer “On”, the television will eventually turn
off, if no controls are operated for 3 hours after the TV was turned
on by timer. This function is only available in timer “On” mode
and prevents overheating or leakages, which may occur if a TV is
on for too long (when you are on vacation, for example).
➢
If no signal is received for 15 minutes, the TV will be
automatically turned off.
Enter
Return
Off Timer
Hour
Minute
Activation
07
00
No
Move
➢
12 : 00
: Off
00 : 00 On
00 : 00 Off
TV
Adjust
Return
Off Timer
Hour
Minute
Activation
07
00
Yes
Move
Adjust
..
English - 51
Return
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 52
Viewing an External Signal Source
TV
Use the remote control to switch between viewing signal from
connected equipment, such as VCR, DVD, Set-Top box, and the TV
source (broadcast or cable).
Input
Source List
: TV
Edit Name
1
Press the MENU (
Result:
2
Move
TV
Enter
TV
Ext.1
Ext.2
AV1
AV2
S-Video1
S-Video2
More
Move
Result:
3
Source List
-------------------
Enter
5
Press the … or † button to select the signal source, press the
ENTER (
) button.
Result:
➢
Result:
: TV
TV
Enter
Move
:
:
:
:
:
:
:
Enter
English - 52
Return
The Input menu is displayed again.
Press the … or † button to select Edit Name.
Press the ENTER (
) button.
9
Press the … or † button to select external source to be edited.
Press the ENTER (
) button.
Return
- - ---- - - - - -VCR
- - - -DVD
---D-VHS
---Cable STB
-------
) button to select Input.
8
Result:
The available device names are listed.
VCR, DVD, D-VHS, Cable STB, HD STB, Satellite
STB, AV Receiver, DVD Receiver, Game, Camcorder,
DVD Combo, DHR (DVD HDD Recorder), or PC
Edit Name
Ext.1
Ext.2
AV1
AV2
S-Video1
S-Video2
Component1
More
) button.
The main menu is displayed.
Press the ENTER (
Edit Name
Move
The available signal sources are listed.
Press the MENU (
7
) button again.
◆ TV, Ext.1, Ext.2, AV1, S-Video1, Component1,
Component2, PC, or HDMI : on the TV’s rear panel.
◆ AV2, S-Video2 : on the TV’s side panel.
◆ You can also set these options simply by pressing the
SOURCE (
) button on the remote control.
Result:
Source List
The Source List is selected.
Press the ENTER (
Return
Input
) button.
4
6
TV
) button to select Input.
The Input menu is displayed.
Press the ENTER (
Result:
:
:
:
:
:
:
The main menu is displayed.
Press the ENTER (
Return
) button.
10
Select the required device by pressing the … or † button.
Press the ENTER (
) button.
11
Press the EXIT button to exit.
➢
If you change the external source while viewing, pictures
might take a short period of time to switch.
Y
a
V
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 53
Redirecting an Input to the External Output
Your television enables you to choose which audio/video signals
are output to the external connector.
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
The Setup menu is displayed.
3
Press the ENTER (
4
Press the … or † button to select AV Setup.
Press the ENTER (
) button.
Result:
Setup
Plug & Play
Language
:
Time
Child Lock
Blue Screen
:
Melody
:
Colour Weakness :
More
Press the … or † button to select Setup.
Result:
5
TV
Move
Enter
Return
) button.
TV
Setup
More
PC
AV Setup
Screen Burn Protection
The AV Setup menu is displayed.
◆ Ext.1 : Default (TV)
◆ Ext.2 : Variable (TV, Ext.1, Ext.2, AV1, AV2,
S-Video 1, S-Video 2, or Monitor Out)
Move
TV
7
Off
Off
Off
Press the … or † button to select required input (Ext.2). Press
the ENTER ( ) button. Select the source to be directed to the
output by pressing the … or † button.
➢
6
English
When you are satisfied with your setting, press the ENTER (
button.
)
Enter
Return
AV Setup
Ext.1
: TV
Ext.2
: TV
Press the EXIT button to exit.
Move
Enter
English - 53
Return
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 54
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
➢
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a coloured heading (FASTEXT system)
English - 54
Y
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 55
Displaying the Teletext Information
You can display Teletext information at any time on your television.
Teletext information to be displayed correctly,
☛ For
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
Select the channel providing the Teletext service by pressing the
P or button.
2
Press the TTX/MIX (
Result:
3
The contents page is displayed. It can be redisplayed at
any time by pressing the
(index) button.
Press the TTX/MIX (
Result:
) button to activate the teletext mode.
) button again.
The screen will be split into two. This Double Teletext
feature lets you view the actual broadcast and teletext
information separately on the screen.
4
If you wish to display the actual broadcast and teletext information
on a single screen, press the TTX/MIX (
) button again.
5
Press the EXIT/TV button to exit from the teletext display.
s
English - 55
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 56
Selecting Display Options
When you have displayed a Teletext page, you can select various
options to suit your requirements.
To display...
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page
(sub-page)
◆ The broadcast when searching for a page
(cancel)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
➢
English - 56
Press the...
To return to the normal display after using the reveal or
size feature, press the EXIT/TV button.
Y
b
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 57
Selecting a Teletext Page
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by
pressing the corresponding numeric buttons.
Result:
2
The current page counter is incremented and the page
is then displayed. If the selected page is linked with
several secondary pages, the secondary pages are
displayed in sequence. To freeze the display on a
given page, press the
(hold). Press it again to
resume.
If the FASTEXT system is used by a broadcasting company, the
different topics covered on a Teletext page are colour-coded and
can be selected by pressing the coloured buttons on the remote
control.
Press the coloured button corresponding to the topic that you wish
to select; the available topics are given in the status line.
Result:
The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the sub-page, see the following steps.
◆ Press the
(sub-page) button.
Result:
The available sub-pages appear.
◆ Select the required sub-page. Sub-pages can be scrolled by
pressing the
or
button.
5
When you have finished, press the EXIT/TV button to return to
your normal broadcast.
English - 57
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 58
Connecting to External Input/Output
“EXT 1” is used for the equipment with an RGB output, such as video game devices or video disc players.
①
Rear of the TV
VCR
②
or
③
DVD
or
Decoder /
Video Game Device
① This end can be fitted with:
◆ A SCART connector
◆ An S-Video connector and two audio RCA connectors (L+R); EXT 2
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
Video Disc Player
② If you have a second VCR and wish to copy cassette tapes, connect the
source VCR to EXT 1 and the target VCR to EXT 2 so that you can
redirect the signal from EXT 1 to EXT 2.
④
Satellite Receiver
③ If you have a decoder, connect the decoder to the VCR and the VCR to
the television.
➃ When you wish to record a programme, connect the receiver to EXT 1 and
the VCR to EXT 2 so that you can redirect the signal from EXT 1 to EXT 2.
➢
Please be sure to match the colour coded input terminals and cable jacks.
Input/Output Specification
Input
Connector
Output
Video
Audio (L/R)
S-Video
RGB
Video + Audio (L/R)
EXT 1
✔
✔
✔
✔
Only TV output is available.
EXT 2
✔
✔
✔
☛
Output you can choose.
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
English - 58
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 59
Connecting to the AV Output
“AV OUT” are used for the equipment with an RGB output, such as video game devices or video disc players.
Rear of the TV
Side of the TV
②
①
VCR
DVD
Decoder /
Video Game Device
Video Disc Player
① This end can be fitted with:
◆ Three RCA connectors (VIDEO + AUDIO L/R)
Satellite Receiver
② If you have a second VCR and wish to copy cassette tapes, connect the
source VCR to “AV IN1 (AV IN2)” and the target VCR to “AV OUT” so
that you can redirect the signal from “AV IN1 (AV IN2)” to “AV OUT”.
③
③ When you wish to record a programme, connect the receiver to “AV IN1
(AV IN2)” and the VCR to “AV OUT” so that you can redirect the signal
from “AV IN1 (AV IN2)” to “AV OUT”.
➢
Please be sure to match the colour coded input terminals and cable jacks.
English - 59
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 60
Connecting to the RCA Input
➢
The RCA (VIDEO + AUDIO L /R) connectors are used for equipment, such as camcorders, video disc
players, and some video game devices.
Side of the TV
Camcorder
Rear of the TV
Video game device
Video disc player
➢
Please be sure to match the colour coded input terminals and cable jacks.
Connecting to the S-Video Input
➢
The S-VIDEO and AUDIO L /R connectors are used for equipment with an S-Video output, such as a
camcorder or VCR.
Side of the TV
Camcorder
Rear of the TV
①
and
VCR
① To play pictures and sound, both the S-VIDEO (1, 2) and AUDIO L /R connectors must be used.
➢
Please be sure to match the colour coded input terminals and cable jacks.
☛
English - 60
Whenever you connect an audio or video system to your television,
ensure that all elements are switched off. Refer to the documentation
supplied with your equipment for detailed connection instructions
and associated safety precautions.
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 61
Connecting to the Component Input
Rear of the TV
① The “COMPONENT IN 1” connectors are
①
DVD
②
used for equipment with a DVD output.
(480i/480p/576i/576p/1080i)
DTV receiver
② The “COMPONENT IN 2” connectors are
used for DTV receiver.
(480i/480p/576i/576p/1080i)
➢
Please be sure to match the color coded input terminals and cable jacks.
Connecting to the PC Input
➢
The “PC IN” (video) and “AUDIO” connectors are used for interfacing with your PC.
Rear of the TV
Personal Computer
and
n
English - 61
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 62
Connecting to the HDMI Input
➢
The “HDMI/DVI IN” connector is used for equipment with an HDMI out.
Rear of the TV
DTV Set-Top Box
Connecting to the HDMI/DVI Compatible
➢
The “HDMI/DVI IN” connector is used for equipment with a DVI out.
Rear of the TV
DTV Set-Top Box
(HDMI/DVI cable)
and
English - 62
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 63
Connecting Home Theater System
Use the “AV OUT” ports of the PDP for Home Theater System Connections.
Rear of the TV
Connecting the Home Theater System
① Connect the monitoring audio out L and
R jacks of the AV OUT on the rear-side
connection panel of the PDP TV to the
AUDIO IN jacks of the DVD Home
Theater System (or AV Receiver) using
the audio cable.
② Press the SOURCE (
) button to
select the desired external device
connected to the PDP TV.
③ If you want to hear the sound through
separate speakers, cancel the internal
amplifier.
②
①
DVD Home Theater
➢
AV Receiver Amplifier
Please be sure to match the colour coded input terminals and cable jacks.
☛
◆ Refer to corresponding user’s manual from the manufacturer for wiring the
speakers to the DVD Home Theater System (or AV Receiver).
◆ Disable the PDP TV internal speaker to enjoy the rich sound through the
speakers of your Home Theater System.
To Display the DVD Home Theater
! Turn the PDP on and press the SOURCE (
) button to select the Ext.1, Ext.2, or Component (1, 2).
@ Be sure to connect the video cable properly if desired external input (Ext.1, Ext.2, or Component (1, 2))
cannot be selected.
# Play the DVD after activating the DVD Home Theater System.
$ Use the volume control of the Home Theater System while watching the PDP using the DVD Home
Theater, where the PDP TV does not produce the audio.
English - 63
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 64
Setting up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
B
T
V
1 Right click the mouse on the Windows Desktop,
then click on Properties.
The Display Properties will be displayed.
2 Click on Settings tab, then set the Display Mode
with reference to the Display Modes Table.
You do not need to change the Colours settings.
3 Click on Advanced. A new settings dialog box
will be displayed.
2
4 Click on the Monitor tab, then set the Screen
refresh rate with reference to the Display Modes
Table. Set the Vertical Frequency and Horizontal
Frequency individually if you can do so instead of
setting the Screen refresh rate.
3
5 Click on OK to close the window, then Click on
OK button to the Display Properties window.
Automatic re-booting may commence at this
moment.
6 Shutdown the PC, and connect it to your TV.
(“Connecting to the PC Input” on page 61)
4
5
English - 64
➢
◆ The actual screens on your PC may look
different, depending on your particular
version of Windows and the type of your
PC.
◆ When you use your TV as a PC monitor, it
supports Colours up to 32 bits.
◆ In this case, the display on the TV may look
different depending on your particular
version of Windows or the PC
manufacturer.
◆ When connecting a PC you must set it to
the display settings that are supported by
the TV. Otherwise, the message Out of
input range will be displayed.
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
◆
BN68-00973A-00Eng
f
k
4:23 PM
Page 65
Input Mode (PC)
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Video Signal
Resolution
(Dot X Line)
Vertical
frequency (Hz)
Horizontal
frequency (kHz)
Vertical
polarity
Horizontal
polarity
640 x 350
720 x 400
70.086
70.087
59.940
70.000
72.809
75.000
56.250
60.317
70.000
72.188
75.000
60.004
70.069
72.000
75.029
59.855
60.015
31.469
31.469
31.469
35.000
37.861
37.500
35.156
37.879
43.750
48.077
46.875
48.363
56.476
57.672
60.023
44.772
47.712
P
N
N
N/P
N
N
N/P
P
N/P
P
P
N
N
N/P
P
N
P
N
P
N
N/P
N
N
N/P
P
N/P
P
P
N
N
N/P
P
P
P
640 x 480
IBM PC / AT
Compatible
800 x 600
1024 x 768
e
s
9/28/05
1280 x 720
1360 x 768
(N: Negative / P: Positive)
◆ The interlace mode is not supported.
◆ The television might operate abnormally if a non-standard video format is selected.
◆ 480i/p, 576i/p, 720p, or 1080i is not available in PC mode.
Notes
◆ The PC text quality is optimum in WXGA mode (1360 x 768@60Hz).
◆ When this television is used as a PC display, 32-bit colour is supported.
◆ Your PC display screen might appear different depending on the manufacturer (and your particular version of
Windows). Check your PC instruction book for information about connecting your PC to a television.
◆ If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHz (horizontal).
In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned
) button to enter the Video mode. Also, make
off (or if the PC is disconnected). If so, press the SOURCE (
sure that the PC is connected.
◆ When connecting a notebook PC to the television, make sure that the PC screen is displayed through only the
television (Otherwise, random signals might appear).
◆ When horizontal synchronous signals seem irregular in PC mode, check PC power saving mode or cable connections.
◆ The Display Settings Table above complies to the IBM/VESA standards, and based on the analog input.
◆ The best timing for the vertical frequency to each mode is 60Hz.
English - 65
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 66
Programming the Remote Control for Other Components
Your TV comes equipped with a universal remote control. In
addition to controlling the TV, the universal remote control can
also operate a VCR, Cable box, DVD, and some Samsung Set-top
boxes (even if your VCR, Cable box and DVD are made by
manufacturers other than Samsung).
➢
The remote control might not be compatible with all
VCRs, DVD players, Cable boxes, and Set-Top Boxs.
1
Turn off your VCR (Cable box or DVD).
2
Press the MODE button to switch the remote control to the VCR
(CATV or DVD) mode.
➢
The remote control has five modes : TV, STB, VCR,
CABLE and DVD.
3
Press the SET button.
4
Enter 3 digits of the VCR (Cable box or DVD) code listed on the
next page for your VCR (Cable box or DVD).
Example: To enter code “6”, press 0, 0, and 6.
To enter code “76”, press 0, 7, and 6.
5
Press the
(power) button. Your VCR (Cable box or DVD)
should turn on. If it turns on, your remote control is now set
correctly.
➢
6
If it does not turn on, repeat the steps above, but try one of
the other codes listed for your particular brand.
Once your remote control is set up, press the MODE button any
time you want to use the remote control to operate the VCR
(Cable box or DVD).
➢
◆ When your remote control is in STB, VCR, CABLE or
DVD mode, the volume buttons still control your
television’s volume.
◆ When your remote control is in TV mode, the VCR or
DVD control buttons (rewind, stop, play/pause, and fast
forward) still operate your VCR or DVD.
continued...
English - 66
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 67
VCR Remote Control Codes
Admiral
020,
Aiwa
025
Akai
027, 004, 032
Audio Dynamics
007, 026
Bell&Howell
018
Broksonic
022
Candle
002, 006, 003, 015, 008, 055
Canon
021, 056
Citizen
002, 006, 003, 015, 008, 055
Colortyme
007
Craig
002, 024
Curtis Mathes 017, 002, 021, 007, 025, 008, 056, 064, 066
Daewoo
003, 015, 016, 010, 011, 012, 013, 014
DB
007, 026
Dimensia
017
Dynatech
025
Electrohome
034
Ernerson
021, 006, 022, 003, 025, 030, 032, 034, 040,
047, 001, 050, 052, 060, 063, 065, 066, 067, 069,073
Fisher
018, 024, 028, 029, 048, 051, 061
Funai
025
Genneral Electric
017, 002, 021, 005, 056
Go Video
002
Goldstar
006, 007, 008, 009, 010
Harman Kardon
007
Hitachi
019, 025, 041, 042,074
Instant Replay
021
JC Renney 018, 019, 002, 021, 007, 026, 037, 041, 054, 056
JCL
021, 018, 007, 026, 037, 008
Kenwood
018, 007, 026, 037, 008
KLH
070
Lioyd
025
Logik
038
LXI
025
JVC
081,082,083
Magnavox
021, 056, 059
Marantz
018, 021, 007, 026, 037, 008, 062
Marta
006
KONIA
036
ORION
073, 074, 075, 076
MEI
021
Memorex
021, 006, 024, 025
MGA
034
Midland
005
Minolta
019, 041,075
Mitsubishi
019, 034, 041, 046
Montgomery Ward
MTC
Multitech
NEC
Optimus
Panasonic
Pentax
Pentex Research
Philco
Philips
Pioneer
Portland
ProScan
Quartz
Quasar
Radio Shack/Realistic
020
002, 025
002, 025, 038, 005
018, 007, 026, 037, 008, 062, 064
020
021, 056, 071, 072
019, 041,075
008
021, 056, 059
021, 080
019, 026, 039, 053
049, 015, 055
017
018
021, 056
018, 020, 021, 006, 024, 025,
029, 034, 048, 056
RCA
017, 019, 002, 021, 035, 041, 043, 057, 068,076
Samsung
000, 001, 002, 003, 004, 005, 077, 078, 079
Sansui
026
Sanyo
018, 024
Scott
003, 047, 052, 067
Sears
018, 019, 006, 024, 028, 029, 041, 048, 051
Sharp
020, 034, 045, 015
Shimom
027, 033, 038, 058
Signature
025
Sony
027, 033, 044
Sylvania
021, 025, 056, 059
Symphonic
025
Tandy
018, 025
Tashika
006
Tatung
037
Teac
025, 037, 068
Technics
021
Teknika
021, 006, 025, 031
TMK
066
Toshiba
019, 003, 029, 051, 052
Totevision
002, 006
Unitech
002
Vector Research
007, 026
Victor
026
Video Concepts
007, 026
Videosonic
002
Wards 019, 020, 002, 021, 006, 024, 003, 025, 034, 038, 041
Yamaha
018, 007, 026, 037, 008
Zenith
023, 027, 033,
continued...
..
English - 67
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 68
Cable Box (CATV) Remote Control Codes
GI
Hamlin
Hitachi
Jerrold
macom
magnavox
Oak
Panasonic
Phlips
Pioneer
RCA
Regal
Regency
041
003, 024, 031,
025, 030,
038, 039
025, 030
019, 023, 028,
026,
003, 022, 027, 037, 044,
019, 021, 023, 028,
018, 020, 004, 044,
014, 022, 040
003,
015, 023
SA
Samsung
Scientific Atlanta
Sprucer
Stargate 2000
Sylvania
Texscan
Tocom
Universal
viewstar
wamer amex
zenith
042, 043
000, 005, 003, 004, 006, 007, 001, 002
042, 043
022
036
016,
016,
032
033, 034
019, 021,023, 028,
046
017, 029, 035, 037, 045
Set-Top Boxs (STB) Remote Control Codes
samsung
000, 001,002,003,004,008,009,010,
011,012,013,014
Alphastar
023
ANAM
043
Channel Master
018,034
Crossdigital
019
Chaparral
035
Direc TV
015,016,017,019,022,045,060,061,062,
065,066,067,068
DAEWOO
074
Dish Network System
069,070
Dishpro
069
Drake
018,024,032
DX Antenna
027
Echostar
025,069,070,071
Expressvu
069
GOI
069
GE
065
General Instrument
046,047,048,063,064
HTS
069
Home Cable
056
Hitachi
022
Hughes Network
015,017
IQ
020
IQ Prism
020
Janeil
059
Jerroid
063
JVC
069,070
LG
Magnavox
Memorex
Motorola
Macom
Mitsubishi
Next Level
Philips
Primestar
Panasonic
Paysat
Proscan
RCA
Radioshack
Realistic
STS
Star Trak
STS
Sky
Sky life
Shack
Star Choice
SONY
Toshiba
Ultimate TV
Uniden
Zenith
044,073
016,021,036,038,039,040,041,042
016
064
018
015
047,048,064
015,016,017,021,033,036,038,039,040,
041,042,067
046,049,050,063
058,059,061,062
016
065,066
051,052,053,065,066
064
057
020
026
027
031
005,006,007
064
064
054,060
015,017,028,029,030,072
060,066
016,021,037,055,056,057
024,031,068
continued...
English - 68
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 69
DVD Remote Control Codes
SAMSUNG 000,001,002,003,004,005,006,007,008,009,
010,011,012,013,014,015,016,017,018,019,020,021,022
ANAM
030,
Audiovox
075
Audiologic
085
Anaba
072
Apex Digital
070,071,086,083,084,074,088,111,112
Aiwa
114
Broksonic
062
Blaupunkt
074
B&K
122,123
CURTIS MATHES
027
Cyber Home
077,078,079,082
Clarion
080,125
Cirrus
081
Cyber Home
065
Cinevision
095
Daewoo
066
DENON
146
Farenheit
067,068
Fisher
090
GPX
060
Go Video
061,089,133,135
GE
069,074
Greenhill
074
Hitachi
064,113
Hiteker
071
Hoyo
073
Harman/Kardon
091,110
IRT
089
Integra
092
JBL
091
JVC
022,033,115,116
Jaton
073
Kenwood
051,108,109
Kiss
073
Konka
059,100,106,107
KLH
074,075
LG
025,031
Loewe
057
Lasonic
058
Mobile Authority
054
Memorex
055
Malata
056
Magnavox
076,093
Mintek
074,094
Monyka
073
Norcent
048,049,050
Next Base
052
NEC
053
nantaus
144
Nesa
074
OptoMedia Electronics
105
Optiview
072
Onkyo
076,092,119
Philco
044,045
Princeton
046,047
ProScan
023
Panasonic
024,034,124,134,136,137,138
Philips
036,076
Pioneer
037,143
Rotel
117,118
Rio
120
RCA
023,131,132
Raite
073
RCA
035,074,075
Rowa
038
Sampo
104
SONY
026,029,126,127,128,129,130,141
Sherwood
039,041
SVA
042
Sylvania
043,093
Sharp
140
Sansui
062
Sanyo
062
Shinsonic
094
Sanyo
090
THOMSON
145
TOSHIBA
028,062,076
Technics
139
Tview
072
Tokai
073
Teac
096
Techwood
097
Tredex
098,099,101
Urban Concepts
076
Venturer
075
Vocopro
102
YAMAHA
032,063
Yamakawa
040,073
Xwave
103
Zenith
076,121
..
English - 69
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 70
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the power button (On/Off) and the
(power) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
◆ Check if Internal Mute is set to ON.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE (
has been pressed.
) button on the remote control
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
Screen is black and power indicator
light blinks steadily
◆ On your computer check; Power, Signal Cable.
◆ The TV is using its power management system.
◆ Move the computer’s mouse or press any key on the keyboard.
◆
◆
◆
◆
English - 70
On your equipment check (STB, DVD, etc) ; Power, Signal Cable.
The TV is using its power management system.
Press the Source button on the panel or remote control.
Turn the TV off and on.
BN68-00973A-00Eng
9/28/05
4:23 PM
Page 71
Memo
l
,
English - 71
BN68-00973A-01Eng
11/4/05
10:16 AM
Page 72
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product indicates
that a faulty condition may be present.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm
to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly
to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and
how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
BN68-00973A-01
Download PDF

advertising