Samsung | SP-54T8HLR | Samsung SP-54T8HLR Benutzerhandbuch

BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 1
COLOUR
TELEVISION
SP43T8
SP42W4
SP43W6
SP42Q2
SP43Q5/47Q5
SP43R1/54R1
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
TELETEXT
SELF FOCUS
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 2
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 3
Important Warranty Information Regarding Television
Format Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are
primarily designed to view standard format full-motion video. The images displayed on them
should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary
graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen
pictures), should be limited to no more than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are
primarily designed to view wide screen format full-motion video. The images displayed on them
should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your
model offers this feature, and constantly moving. Displaying stationary graphics and images on
screen, such as the dark side-bars on non-expanded standard format television video and
programming, should be limited to no more than 15% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video
game displays, station logos, web sites or computer graphics and patterns, should be limited as
described above for all televisions. Displaying any stationary images that exceed the above
guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent
burned-in ghost images in the television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images, not stationary patterns or dark bars.
On television models that offer picture sizing features, use these controls to view the different
formats as a full screen picture.
B
e careful in the selection and duration of television formats used for viewing. Uneven CRT
aging as a result of format selection and use, as well as other burned-in images, is not covered by
your Samsung limited warranty.
English - 3
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 4
Contents
◆ FOREWORD
■
Important Warranty Information Regarding Television Format Viewing ........
3
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Control Panels (depending on the model) ..................................................... 6~7
Connection Panels (depending on the model) ..............................................
8
Using a Display Deck (depending on the model) ..........................................
9
Inserting the Batteries in the Remote Control................................................
9
Infrared Remote Control ................................................................................
10
Connecting to an Aerial or Cable Television Network ...................................
11
Connecting a Satellite Receiver or Decoder..................................................
12
Switching Your Television On and Off...........................................................
13
Placing Your Television in Standby Mode .....................................................
14
Becoming Familiar with the Remote Control .................................................
15
Plug and Play Feature ................................................................................... 16~17
Displaying Information ...................................................................................
17
Choosing Your Language..............................................................................
18
Adjusting the Screen Automatically (Self Focus)...........................................
19
Deactivating the Automatic Execution of the Self Focus ...............................
20
Removing the “Self Focus” from the Display .................................................
21
◆ SETTING THE CHANNELS
■
■
■
■
■
■
■
Storing Channels Automatically.....................................................................
22
Sorting the Stored Channels .........................................................................
23
Storing Channels Manually............................................................................ 24~25
Skipping Unwanted Channels .......................................................................
26
Assigning Names to Channels ......................................................................
27
Locking the Channel......................................................................................
28
Fine Tuning Channel Reception ....................................................................
29
◆ USING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
Using the LNA (Low Noise Amplifier) Feature...............................................
30
Changing the Picture Standard .....................................................................
31
Customizing the Picture Settings...................................................................
32
Selecting the Picture Size (4:3 Model) ..........................................................
33
Selecting the Picture Size (Wide Model) ....................................................... 34~35
Selecting the Scan Mode...............................................................................
36
Using the Digital NR (Digital Noise Reduction) Feature ................................
37
Setting the Blue Screen Mode.......................................................................
38
Freezing the Current Picture .........................................................................
38
Changing the Sound Standard ......................................................................
39
Adjusting the Sound Settings ........................................................................
40
English - 4
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 5
Contents (continued)
◆ USING YOUR TELEVISION (continued)
■
■
■
■
■
■
■
Extra Sound Settings.....................................................................................
- Auto volume
- Dolby Virtual
Setting the Melody Sound .............................................................................
Selecting the Sound Mode (depending on the model) ..................................
Setting and Displaying the Current Time.......................................................
Setting the Sleep Timer .................................................................................
Switching the Television On and Off Automatically .......................................
Viewing an External Signal Source ...............................................................
41
42
43
44
45
46
47
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting Display Options..............................................................................
Selecting a Teletext Page..............................................................................
Storing Teletext Pages (depending on the model) ........................................
48
49
50
51
52
◆ ADDITIONAL INFORMATION ON CONNECTIONS
■
■
■
■
■
■
Connecting to the External Input/Outputs......................................................
Connecting to the Audio Output ....................................................................
Connecting to the RCA Input.........................................................................
Connecting to the S-Video Input....................................................................
Connecting to the Component Input..............................................................
Redirecting an Input to the External Output ..................................................
53
54
55
56
57
58
◆ RECOMMENDATIONS FOR USE
■
■
Programming the Remote Control for Other Components ............................ 59~60
- VCR Remote Control Codes ......................................................................
60
- Cable Box (CATV) Remote Control Codes ................................................
60
- DVD Remote Control Codes ......................................................................
60
Troubleshooting: Before Contacting Service Personnel................................
61
Symbols
Press
☛
Important
➢
Note
English - 5
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 6
Control Panels (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
SP43T8
SP43W6
SP42W4
( e ) Channel Selection
( a ) Input Source Selection
( b ) Menu Display
(f)
( c ) Accessing to the Selected Option
on the Menu System
( g ) Standby & Timer Indicator
Remote Control Sensor
( h ) Power On/Off
( d ) Volume Adjustment
➢
◆ You can use the
the model.
C/P.
◆ The + and
C/P.
on the remote control.
buttons to switch on the TV when it is in standby mode depending on
buttons have the same function as the ▲/▼/œ/√ buttons
◆ If the remote control no longer works or your have lost it, you can use controls on the panel of the TV.
English - 6
BP68-00457A(J60B_Euro_ENG)
2005/01/05
10:04 AM
Page 7
Control Panels (depending on the model) (continued)
➢
The actual configuration on your TV may be different, depending on
your model.
SP42Q2
SP43Q5
SP47Q5
SP43R1
SP54R1
g on
e TV.
( a ) Input Source Selection
( e ) Channel Selection
( b ) Menu Display
(f)
( c ) Accessing to the Selected Option
on the Menu System
( g ) Standby & Timer Indicator
( d ) Volume Adjustment
Remote Control Sensor
( h ) Power On/Off
(i)
Picture On/Off
English - 7
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 8
Connection Panels (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
Side of the TV
( a ) Video Input
( b ) Audio Input
( c ) S-Video Input
Rear of the TV
Component Input
75Ω Coaxial Connector for Aerial or Cable Network
SCART Audio/Video Input/Output
Audio Output
➢
☛
For further details about connection, refer to pages 53~57.
Whenever you connect an audio or video system to your television, ensure that all elements are switched
off. Refer to the documentation supplied with your equipment for detailed connection instructions and
associated safety precautions.
English - 8
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 9
Using a Display Deck (depending on the model)
You can display a VCR or DVD Player, etc. by using the display
deck.
SP43W6
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
English - 9
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 10
Infrared Remote Control
TELEVISION STANDBY
PICTURE SIZE/
TELETEXT SIZE SELECTION
TUNER/CABLE NETWORK
SELECTION
MAKE THE REMOTE CONTROL WORKS
FOR TV, STB, VCR, CABLE, DVD
PLAYER
DIRECT CHANNEL SELECTION
ONE OR TWO-DIGIT CHANNEL
SELECTION/
TELETEXT STORE
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
SWITCH REPEATEDLY BETWEEN THE
LAST TWO CHANNELS DISPLAYED
NEXT CHANNEL/
TELETEXT NEXT PAGE
EXTERNAL INPUT SELECTION/
TELETEXT MODE (LIST/FLOF)
SELECTION
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
INFORMATION DISPLAY/
TELETEXT REVEAL
EXIT FROM ANY DISPLAY
MENU DISPLAY/
TELETEXT INDEX
CONTROL THE CURSOR
IN THE ON-SCREEN MENU
SOUND EFFECT SELECTIOND
SURROUND ON/OFF DIRECTLY
SELF FOCUS
PICTURE FREEZE
TELETEXT SUB-PAGE
REMOTE CONTROL SETUP
CONFIRM YOUR CHOICE
(STORE OR ENTER)
PICTURE EFFECT SELECTION
SOUND MODE SELECTION
FASTEXT TOPIC SELECTION
AUTOMATIC SWITCH-OFF
VCR/DVD FUNCTIONS;
- REWIND (
)
- STOP ( )
- PLAY/PAUSE (
)
- FAST FORWARD (
)
TELETEXT CANCEL
IF YOUR REMOTE CONTROL IS
NOT FUNCTIONING PROPERLY,
TAKE OUT THE BATTERIES AND
PRESS THE RESET BUTTON FOR
ABOUT 2~3 SECONDS. RE-INSERT
THE BATTERIES AND TRY USING
THE REMOTE CONTROL AGAIN.
➢
English - 10
TELETEXT PAGE HOLD
The performance of the remote control may be affected by bright light.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 11
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically” on page 22.
◆ “Storing Channels Manually” on page 24.
Rear of the TV
or
Cable Television
Network
English - 11
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 12
Connecting a Satellite Receiver or Decoder
In order to watch television programmes broadcast via a
satellite network, you must connect a satellite receiver to
the rear of TV. Also, in order to descramble a coded
transmission signal, you must connect a decoder to the
rear of TV.
Rear of the TV
◆ Using a SCART cable
Connect the receiver (or decoder) SCART cable to one
of the SCART connectors on the rear of the television.
◆ Using a coaxial cable
Connect a coaxial cable to the:
- Receiver (or Decoder) output socket.
- Television aerial input socket.
➢
If you wish to connect both a satellite receiver
(or decoder) and a VCR, you should connect the:
◆ Receiver (or Decoder) to the VCR
◆ VCR to the television
Otherwise, connect the receiver (or decoder) directly
to the television.
English - 12
Satellite receiver/
Decoder
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 13
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
2
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
Press the “ I ” button (On/Off) on the front or side of the television.
Result:
3
Press the POWER (
the television on.
Result:
➢
4
The Standby indicator on the front of the television
lights up.
) button on the remote control to switch
The programme that you were watching last is reselected automatically.
If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on page
22 or “Storing Channels Manually” on page 24.
To switch your television off, press the “ I ” button (On/Off) again.
English - 13
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 14
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER (
Result:
2
To switch the television back on, simply press the POWER (
button again.
➢
☛
English - 14
) button on the remote control.
The screen is turned off and the Standby indicator on
the front of the television lights up in red.
You can also switch on by pressing the TV (
button.
) or P
)
/
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ I ”
button (On/Off) on the front or side of the television. It is
best to unplug the set from the mains and aerial.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 15
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
to
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the
previous stored channel.
-
Used to display the corresponding channels.
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this will
result in a single digit channel being displayed.
➢
-/--
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
PRE-CH
(
)
Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the numeric buttons to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
(
)
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
press the
or
button.
MENU
( )
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option.
◆ Increase/decrease a
menu option value.
-
Used to confirm your choice.
Used to switch the
television on when it is
in Standby mode.
Used to exit from the menu
system and return to normal
viewing directly.
TV
(
)
EXIT
(
)
➢
-
Used to exit from the any
disply.
English - 15
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 16
Plug and Play Feature
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
Plug & Play
Start Plug & Play
OK
Enter
1
Return
If the television is in Standby mode, press the POWER (
button on the remote control.
Result:
)
The message Start Plug & Play is displayed.
Setup
TV
Time
Plug & Play
Language
:
Self Focus
Blue Screen
:
English
Deutsch
Français
Nederlands
English
Español
Italiano
Svenska
Português
EllOff
huikav
√
Move
Enter
To start the Plug & Play, press the ENTER (
Result:
√
√
3
Skip
The options available in the Setup group are displayed
with Language is selected.
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm the language.
Result:
4
Plug & Play
Check antenna input.
The message Check antenna input. is displayed.
Make sure that the antenna is connected to the TV, and then
press the ENTER (
) button.
Result:
OK
Enter
) button.
√
▼
▼ More
2
√
The Auto Store menu is displayed with Country is
selected.
Skip
5
Auto Store
TV
Country
:
Search
Move
Select your country by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm your choice.
Result:
Belgum
China
Germany
Spain
France
Italy
Netherlands
Switzerland
Sweden
United Kingdom
Eastern Europe
Others
Enter
√
6
To start the channel store, press the ENTER (
Result:
➢
Skip
Search
The Search menu is displayed.
√
) button.
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
When it has finished, the Clock menu is displayed.
To stop the search before it has finished or return to normal
viewing, press the MENU (
) button.
7
Press the œ or √ button to move to the Hour or Minute.
Set these by pressing the ▲ or ▼ button.
8
Press the ENTER (
9
When the setting has finished all, the message Enjoy your
watching. is displayed, and then the channel which has been
stored will be activated.
Start
Enter
Skip
Clock
TV
√ Move
Hour
Minute
--
--
Adjust
Plug & Play
Enjoy your watching.
OK
English - 16
Exit
) button.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 17
Plug and Play Feature (continued)
If you want to reset this feature...
Setup
TV
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Press the ENTER (
4
Press the ▲ or ▼ button until the Plug & Play option is selected.
Press the ENTER (
) button.
Result:
5
) button.
√
Plug & Play
Language
:
English
:
Off
√
√
Self Focus
Blue Screen
The options available in the Setup group are displayed.
3
√
Time
√
▼ More
Move
Enter
This feature starts with the message Start Plug &
Play is displayed.
For further details on how to set, refer to the opposite page.
Displaying Information
You can view the channel information and setting status you select
by pressing the “INFO ( )” button on the remote control.
P 1
Mono
Picture
Sound
12 : 02
: Dynamic
: Custom
English - 17
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 18
Choosing Your Language
Setup
TV
√
Time
√
Plug & Play
Language
:
English
√
:
2
Enter
Return
Setup
TV
Time
Plug & Play
Language
Self Focus
Blue Screen
English
Deutsch
Français
Nederlands
: English
Español
Italiano
Svenska
Português
EllOff
huikav
:
Enter
English - 18
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the Setup is selected.
Result:
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Language is selected. Press the
ENTER (
) button.
√
) button.
√
Result:
√
√
√
▼
▼ More
Move
Press the MENU (
Result:
√
Off
▼ More
Move
1
√
Self Focus
Blue Screen
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
Return
5
The languages available are listed.
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm your choice.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 19
Adjusting the Screen Automatically (Self Focus)
The “Self Focus” feature automatically finds the optimum picture
quality when blurring, overlapping colours or incorrect focus
occurs. These conditions may be caused by moving your TV.
Setup
TV
√
Time
1
Press the MENU (
Result:
) button.
Language
The main menu is displayed.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Press the ENTER (
4
Press the ▲ or ▼ button until the Self Focus is selected.
Press the ENTER (
) button.
Move
5
Result:
➢
➢
Off
√
√
√
Return
) button.
The Self Focus is selected.
Press the ENTER (
:
Enter
Self Focus
TV
Result:
English
▼ More
The options available in the Setup group are displayed.
3
:
Self Focus
Blue Screen
2
√
Plug & Play
√
Self Focus
Auto
:
On
√
Message Display
:
On
√
) button again
The self focus process begins with the message Self
Focus and horizontal bar is displayed. During the
process, minor distortions of the picture may occur. At
this time, the colors may diffuse and a searching action
will appear on the edges of the screen. This is a normal
part of the adjustment. When it is finished, all of things
will disappear and the optimum picture quality can be
enjoyed.
Move
Enter
Self Focus
You can also set these options simply by pressing the
SELF FOCUS button.
◆ Changing channels and any other signal changes will
pause the self focus until a stable signal has returned.
It resumes after the signal has been stabilised. This
feature will not work without a signal.
◆ Ambient light that is too bright may affect the self focus.
If this occurs, darken the environment and try again.
English - 19
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 20
Deactivating the Automatic Execution of the Self Focus
Setup
TV
√
Time
√
Plug & Play
Language
:
English
:
Off
Blue Screen
√
√
Self Focus
The “Self Focus” feature starts on default. It will automatically
begin 10 minutes after switching on the power and the appearance
of the screen image. To set the optimum picture quality, the
“Self Focus” will automatically begin again after another 30
minutes, as the screen image is then fully stabilised.
1
Result:
▼ More
Move
Press the MENU (
Enter
Return
2
√
Self Focus
Auto
:
Message Display
:
Off
On
On
On
√
√
Enter
English - 20
Return
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Self Focus is selected.
Press the ENTER (
) button.
Result:
Move
The main menu is displayed.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Self Focus
TV
) button.
√
) button
The options available in the Self Focus group are
displayed.
5
Press the ▲ or ▼ button until the Auto is selected.
Press the ENTER (
) button.
6
To turn off the automatic execution of the self focus feature, select
Off by pressing the ▲ or ▼ button. Press the ENTER (
)
button to confirm.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 21
Removing the “Self Focus” from the Display
1
Press the MENU (
) button.
Setup
TV
Result:
2
The main menu is displayed.
√
Time
Press the ▲ or ▼ button until the Setup is selected.
Plug & Play
Result:
Self Focus
Language
The options available in the Setup group are displayed.
Blue Screen
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Self Focus is selected.
Press the ENTER (
) button.
Result:
) button.
The options available in the Self Focus group are
displayed.
5
Press the ▲ or ▼ button until the Message Display is selected.
Press the ENTER (
) button.
6
To remove the message Self Focus and horizontal bar on the
screen during the self focus process, select Off by pressing the ▲
or ▼ button. Press the ENTER (
) button to confirm.
√
:
English
:
Off
√
√
√
▼ More
Move
Enter
Return
Self Focus
TV
√
Self Focus
Auto
:
On
√
Message Display
:
On
Off
On
√
Move
Enter
English - 21
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 22
Storing Channels Automatically
Channel
TV
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
1
Press the MENU (
) button.
Result:
The main menu is displayed.
Return
2
Press the ▲ or ▼ button until the Channel is selected.
Result:
The options available in the Channel group are
displayed.
3
Press the ENTER (
) button.
Result:
The Auto Store is selected.
4
Press the ENTER (
) button again.
Result:
The Auto Store menu is displayed with Country
option selected.
5
Press the ENTER (
) button once again. Select your country
by pressing the ▲ or ▼ button.
The countries are displayed in the following order:
Belgium - Germany - Spain - France - Italy - Netherlands Switzerland - Sweden - United Kingdom - Eastern Europe Others.
If you have selected the Others option but do not wish to
scan the PAL frequency range, store the channels manually
(see page 24).
▼ More
Move
Enter
Auto Store
TV
Country
:
Search
:
Move
Belgum
China
Germany
-/+ Spain
France
Italy
Netherlands
Switzerland
Sweden
United Kingdom
Eastern Europe
Others
Enter
√
√
Return
Auto Store
TV
Country
:
➢
√
Belgum
√
Search
6
Press the ENTER (
7
Press the ▲ or ▼ button until the Search is selected. Press the
œ or √ button.
8
Press the ENTER (
) button to start the search.
Result:
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range, (with lowest first and highest last).
The programme originally selected is then displayed.
To stop the search before it has finished or return to normal
viewing, press the MENU (
) button.
7
Move
Enter
Return
Search
Start
Enter
C--
➢
Return
Search
P 1
-----
9
When searching and storing are complete, the Sort menu is
displayed.
◆ To sort the stored channels into the desired numerical order,
go to Step 6 of the “Sorting the Stored Channels” procedure
on page 23.
◆ To exit from the channel store function without sorting the
channels, press the MENU (
) button repeatedly until the
menus disappear.
10
When the channels have been stored, you can:
◆ Sort them in the order required (see page 23)
◆ Assign a name to the stored channels (refer to page 27)
◆ Clear a channel (see page 26)
◆ Fine-tune channel reception if necessary (see page 29)
◆ Activate/deactivate the LNA (Low Noise Amplifier) feature
(see page 30)
◆ Activate/deactivate the Digital NR (Digital Noise Reduction)
feature (see page 37)
172MHz
Stop
Enter
Return
Sort
TV
From
: P 1
-----
To
: P--
-----
Store
:
?
Move
œ √ Adjust
English - 22
Return
) button to confirm your choice
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 23
Sorting the Stored Channels
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
1
2
Press the MENU (
) button.
The main menu is displayed.
Result:
Press the ENTER (
4
Press the ▲ or ▼ button until the Sort is selected. Press the
ENTER (
) button.
Result:
5
6
7
) button.
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
Move
Return
Sort
From
: P 1
----
To
: P--
----
Store
:
?
The options available in the Sort group are displayed
with From is selected.
Press the ▲ or ▼ button until the To is selected. Select the new
channel number which you wish to identify by pressing the œ or √
button repeatedly.
Move
Press the ▲ or ▼ button until the Store is selected. Select OK to
confirm the exchange of channel numbers by pressing the ENTER
(
) button.
Return
Sort
From
: P 1
----
To
: P 3
----
Store
:
?
The selected channel is exchanged with the one
previously stored to the chosen number.
For all the channels to move to the required channel numbers,
repeat steps 5 to 7 after selecting the From by pressing the ▲ or
▼ button.
œ √ Adjust
TV
Move
8
Enter
TV
Select the channel number that you wish to change by pressing
the œ or √ button repeatedly.
Result:
Auto Store
▼ More
Press the ▲ or ▼ button until the Channel is selected.
The options available in the Channel group are
Result:
displayed.
3
Channel
TV
œ √ Adjust
Return
Sort
TV
From
: P 3
----
To
: P 1
----
Store
:
OK
Move
Enter
English - 23
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 24
Storing Channels Manually
You can store the television channels, including those received via
cable networks.
Channel
TV
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
▼ More
Move
Enter
Return
1
Press the MENU (
Result:
) button.
The main menu is displayed.
Manual Store
TV
2
Prog.
:
P 1
Colour System
:
AUTO
√
Sound System
:
BG
√
Channel
:
C --
Search
:
105MHz
Store
:
?
œ √ Adjust
Move
Return
Press the ▲ or ▼ button until the Channel is selected.
Result:
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Manual Store is selected.
Press the ENTER (
) button.
Result:
Manual Store
TV
Prog.
:
Colour System
:
Sound System
:
Channel
:
P 1
AUTO
Auto
PAL
BGSECAM
NT4.43
C 1
Search
:
105MHz
Store
:
?
Move
Enter
√
The options available in the Manual Store group are
displayed with Prog. is selected.
To assign a programme number to a channel, find the correct
number by pressing the œ or √ button.
6
Press the ▲ or ▼ button until the Colour System is selected.
Press the ENTER (
) button. Indicate the broadcasting
standard required by pressing the ▲ or ▼ button.
Return
:
P 1
Colour System
:
Sound System
:
Channel
:
Search
:
AUTO
BG BG
DK
C 1I
L
105MHz
Store
:
?
Enter
√
7
Press the ENTER (
8
Press the ▲ or ▼ button until the Sound System is selected.
Press the ENTER (
) button. Select the sound standard
required by pressing the ▲ or ▼ button.
√
Result:
Return
9
English - 24
The colour standards are displayed in the following
order.
AUTO - PAL - SECAM - NT4.43.
Manual Store
Prog.
Move
) button.
5
√
Result:
TV
The options available in the Channel group are
displayed.
) button to confirm.
The sound standards are displayed in the following
order:
BG - DK - I - L.
Press the ENTER (
) button to confirm.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 25
Storing Channels Manually (continued)
10
If you know the number of the channel to be stored, see the
following steps.
Manual Store
TV
◆ Press the ▲ or ▼ button until the Channel is selected.
Prog.
:
P 1
Colour System
:
AUTO
√
◆ Press the œ or √ button.
Sound System
:
BG
√
Channel
:
C --
Search
:
105MHz
Store
:
?
◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable
channel).
◆ Press the œ or √ button.
œ √ Select
Adjust
Return
◆ Press the ▲ or ▼ button to select the required number.
➢
11
If no sound or abnormal sound can be heard, re-select the
sound standard required.
If you do not know the channel numbers, select Search by
pressing the ▲ or ▼ button. Press the œ or √ button to start the
search.
Result:
12
13
☛
The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
To store the channel and associated programme number, select
Store by pressing the ▲ or ▼ button. Set to OK by pressing the
ENTER (
) button.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
:
P 1
Colour System
:
AUTO
√
Sound System
:
BG
√
Channel
:
C 1
Search
:
105MHz
Store
:
?
œ √ Select
Return
Manual Store
TV
Channel mode
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
Prog.
Adjust
Repeat Steps 10 to 12 for each channel to be stored.
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
Manual Store
TV
Prog.
:
P 1
Colour System
:
AUTO
√
Sound System
:
BG
√
Channel
:
C 1
Search
:
105MHz
Store
:
?
œ √ Search
Move
Return
Manual Store
TV
Prog.
:
P 1
Colour System
:
AUTO
√
Sound System
:
BG
√
Channel
:
C 1
Search
:
105MHz
Store
:
OK
Move
Enter
English - 25
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 26
Skipping Unwanted Channels
Channel
TV
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All of the channels that you do not specifically choose to skip are
displayed during scanning.
1
▼ More
Press the MENU (
Result:
Move
Enter
Return
2
Press the ▲ or ▼ button until the Channel is selected.
Result:
Add/Delete
TV
P 1
:
Deleted
√
P 2
:
Deleted
√
P 3
:
Deleted
√
P 4
:
Deleted
√
P 5
:
Deleted
√
Press the ENTER (
4
Press the ▲ or ▼ button until the Add/Delete is selected. Press
the ENTER (
) button.
Result:
Enter
TV
Return
:
:
Deleted
Added
Added
Deletde
√
P 2
P 3
:
Deletde
√
P 4
:
Deletde
√
P 5
:
Deletde
√
√
▼
Move
Enter
English - 26
Return
) button.
The Add/Delete menu is displayed with the current
channel selected.
5
Press the ▲ or ▼ button to delete or add the required channel.
Press the ENTER (
) button.
6
Select Deleted or Added by pressing the ▲ or ▼ button. Press
the ENTER (
) button to confirm.
7
Repeat Step 5 for each channel to be erased or added.
Add/Delete
P 1
The options available in the Channel group are
displayed.
3
▼
Move
) button.
The main menu is displayed.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 27
Assigning Names to Channels
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
1
Press the MENU (
Result:
2
Channel
TV
) button.
The main menu is displayed.
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
▼ More
Press the ▲ or ▼ button until the Channel is selected.
Result:
The options available in the Channel group are
displayed.
Move
Enter
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Name is selected. Press the
ENTER (
) button.
P 1
:
-----
P 2
:
-----
P 3
:
-----
Result:
P 4
:
-----
P 5
:
-----
5
6
7
) button.
▼
If necessary, select the channel to be assigned a new name by
pressing the ▲ or ▼ button. Press the ENTER (
) button.
Press the ▲ or ▼ button to select a letter (A~Z), a number (0~9)
or a symbol (-, space). Move on the previous or next letter by
pressing the œ or √ button.
Repeat Steps 5 to 6 for each channel to be assigned to a new
name.
Name
TV
The Name menu is displayed with the current channel
selected.
Return
Move
Enter
Return
Name
TV
P 1
:
A
P 2
:
-----
P 3
:
-----
P 4
:
-----
P 5
:
-----
▼
Adjust
œ √ Select
English - 27
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 28
Locking the Channel
Channel
TV
▲ More
√
Child Lock
√
Fine Tune
LNA
:
Off
This feature allows you to lock the television so that it cannot be
switched on via the front panel. It can, however, still be switched
on via the remote control. Thus, by keeping the remote control
away from unauthorised users, such as children, you can prevent
them from watching unsuitable programmes.
√
1
Press the MENU (
Result:
Move
Enter
Return
2
Press the ▲ or ▼ button until the Channel is selected.
Result:
Child Lock
TV
P 1
:
Unlocked
√
P 2
:
Unlocked
√
P 3
:
Unlocked
√
P 4
:
Unlocked
√
P 5
:
Unlocked
√
Press the ENTER (
4
Press the ▲ or ▼ button until the Child Lock is selected.
Press the ENTER (
) button.
Result:
Enter
The options available in the Channel group are
displayed.
3
▼
Move
) button.
The main menu is displayed.
Return
) button.
The Child Lock menu is displayed and the current
channel is shown as selected.
5
Press the ▲ or ▼ button to select the channel to be locked.
6
Press the ENTER (
) button. To lock the channel, select
Locked by pressing the ▲ or ▼ button (to unlock the channel,
select Unlocked). Press the ENTER (
) button to confirm.
Child Lock
TV
P 1
:
:
Unlocked
Unlocked
Locked
Unlocked
√
P 2
P 3
:
Unlocked
√
P 4
:
Unlocked
√
P 5
:
Unlocked
√
√
▼
Move
Enter
English - 28
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 29
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
Channel
TV
▲ More
√
Child Lock
1
Press the MENU (
Result:
2
) button.
LNA
:
√
Off
The main menu is displayed.
Press the ▲ or ▼ button until the Channel is selected.
Result:
√
Fine Tune
Move
Enter
Return
The options available in the Channel group are
displayed.
Fine Tune
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Fine Tune is selected.
Press the ENTER (
) button.
) button.
P 2
0
Result:
5
The horizontal bar is displayed.
Reset
Move
œ √ Adjust
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button until you reach the setting.
Save
Return
Fine Tune
P 2
6
7
To store the fine tuning setting in the TV’s memory, press the
ENTER (
) button.
To reset the fine tuning to 0, select Reset by pressing the ▲ or ▼
button then press the ENTER (
) button.
1
Reset
Move
Enter
Return
English - 29
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 30
Using the LNA (Low Noise Amplifier) Feature
This feature is very useful in the situation that the TV is used in a
weak signal, and amplifies the TV signal in the weak signal area, but
not noise.
Channel
TV
▲ More
√
Child Lock
√
Fine Tune
LNA
:
Off
This feature is working only in a weak signal condition, and that is
memorized on relevant channel’s additional information.
√
1
Press the MENU (
Result:
Move
Enter
Press the ▲ or ▼ button until the Channel is selected.
Result:
Channel
▲ More
Child Lock
√
Fine Tune
√
LNA
Move
:
Enter
English - 30
The main menu is displayed.
Return
2
TV
) button.
Off
On
√
Return
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the LNA is selected. Press the
ENTER (
) button.
5
Select Off or On by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
) button.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 31
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
Picture
TV
Colour Tone
:
Dynamic
Off
Standard
Movie
Custom
Normal
Size
:
Normal
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
Mode
1
Press the MENU (
Result:
2
Move
Enter
) button.
) button again.
The options available are listed.
Select the required option by pressing the ▲ or ▼ button.
Result:
6
:
Custom
The Mode is selected.
Press the ENTER (
Result:
5
The options available in the Picture group are
displayed.
Press the ENTER (
Result:
4
The main menu is displayed.
Press the ▲ or ▼ button until the Picture is selected.
Result:
3
) button.
The following modes are available:
Dynamic - Standard - Movie - Custom
Press the ENTER (
) button to confirm.
Dynamic
➢
You can also set these options simply by pressing the
P.MODE (
: Picture Mode) button.
English - 31
√
√
√
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 32
Customizing the Picture Settings
Your television has several settings options that allow you to
control picture quality.
Picture
TV
Mode
√
:
Dynamic
:
Normal
√
Size
:
Normal
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
√
Custom
Colour Tone
Move
Enter
1
Press the MENU (
Result:
2
The main menu is displayed.
Press the ▲ or ▼ button until the Picture is selected.
Result:
Return
) button.
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Custom is selected. Press the
ENTER (
) button.
) button.
Custom
TV
Contrast
:
100
√
Brightness
:
45
√
Sharpness
:
75
√
Colour
:
55
√
Result:
5
Move
Enter
Return
The Custom menu is displayed.
Select the option (Contrast, Brightness, Sharpness, Colour,
or Tint-NTSC only) to be adjusted by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
Result:
The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √ button.
Contrast
100
Press the MENU (
) button to return the Picture menu.
Press the ▲ or ▼ button until the Colour Tone is selected. Press
the ENTER (
) button.
7
Select the required colour tone (Warm 1 ~ Warm 10, Normal,
Cool 1 ~ Cool 10) by pressing the œ or √ button.
œ √ Adjust
Move
Picture
TV
Mode
√
:
Dynamic
Colour Tone
:
Normal
√
Size
:
Normal
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
√
Custom
Move
6
Enter
Colour Tone
Normal
œ √ Adjust
English - 32
Return
BP68-00457A(J60B_Euro_ENG)
2005/01/05
10:14 AM
Page 33
Selecting the Picture Size (4:3 Model)
You can select the picture size which best corresponds to your
viewing requirements.
Picture
TV
1
2
Press the MENU (
) button.
The main menu is displayed.
Result:
Mode
Press the ▲ or ▼ button until the Picture is selected.
Result : The options available in the Picture group are
displayed.
Dynamic
Colour Tone
:
Normal
√
Size
:
Normal
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
Move
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Size is selected. Press the
ENTER (
) button.
Result : The Size menu is displayed.
5
Normal
Adjusts the picture to fit into a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
Zoom1
Vertically enlarges the picture approximately 130%.
Zoom2
Vertically enlarges the picture about approximately
150%.
Cinema
When the top and bottom of the screen margin are
black (blank), they will change to gray.
➢
√
Enter
Size
TV
Normal
Zoom1
Zoom2
Cinema
Move
Enter
Lifting is available in the Zoom1 or Zoom2 mode by pressing
the ▲ or ▼ button
You can select these options by simply pressing
the P.SIZE (
) button on the remote control.
4:3 Signal
Normal
Zoom1
Zoom2
Cinema
Zoom1
Zoom2
Cinema
16:9 Signal
Normal
Return
) button.
Select the required mode by pressing the ▲ or ▼ button. Press
the ENTER (
) button.
Result : The following modes are available:
➢
√
:
Custom
English - 33
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 34
Selecting the Picture Size (Wide Model)
You can select the picture size which best corresponds to your
viewing requirements.
Picture
TV
Mode
√
:
Dynamic
:
Normal
√
Size
:
Auto Wide
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
√
Custom
Colour Tone
Move
Enter
Auto Wide
16:9
Panorama
Zoom1
Zoom2
4:3
Cinema1
Cinema2
Move
Press the MENU (
) button.
Result:
The main menu is displayed.
2
Press the ▲ or ▼ button until the Picture is selected.
Result:
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Size is selected. Press the
ENTER (
) button.
Result:
The Size menu is displayed.
5
Select the required mode by pressing the ▲ or ▼ button. Press
the ENTER (
) button.
Return
Size
TV
1
Result :
Enter
Return
) button.
The following modes are available:
Auto Wide Automatically enlarges the image to fit the 16:9
aspect ratio providing the optimum display.
16:9
Adjusts the picture to fit into the 16:9 wide aspect
ratio.
Panorama
Adjusts a Wide picture to appear natural.
Zoom1
Vertically enlarges the picture approximately 130%.
Zoom2
Vertically enlarges the picture about approximately
150%.
4:3
Adjusts the picture to fit into a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
Cinema1
To maintain optimum screen display, the picture is
vertically enlarged and the letterboxed (black margin)
area is filled with gray instead.
Cinema2
When the top and bottom of the screen margin are
black (blank), they will change to gray.
➢
◆ Lifting is available in the Zoom1 or Zoom2 mode by
pressing the ▲ or ▼ button.
◆ Subtitles may be cut-off or hidden below the screen area
in Zoom1, Zoom2, Cinema1, and Cinema2 modes.
➢
English - 34
You can select these options by simply pressing the
P.SIZE (
) button on the remote control.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 35
Selecting the Picture Size (Wide Model) (continued)
4:3 Signal
Auto Wide
Auto Wide
Zoom2
Zoom2
16:9
16:9
4:3
4:3
Panorama
Panorama
Cinema1
Cinema1
Zoom1
Zoom1
Cinema2
Cinema2
16:9 Signal
Auto Wide
16:9
Auto Wide
16:9
Zoom2
Zoom2
4:3
4:3
Panorama
Panorama
Cinema1
Cinema1
Zoom1
Zoom1
Cinema2
Cinema2
English - 35
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 36
Selecting the Scan Mode
Picture
TV
Mode
√
:
Dynamic
Colour Tone
:
Normal
√
Size
:
Normal
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
√
Custom
Move
Enter
Return
You will normally find that scan mode is best set to Natural to
reduce any slight picture flicker. However, it is possible that some
occasional broadcasts (NTSC-M) may benefit by changing the scan
mode.
1
Press the MENU (
Result:
2
Result:
Mode
:
Dynamic
√
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Scan Mode is selected. Press
the ENTER (
) button.
5
Select the required option by pressing the ▲ or ▼ button.
) button.
√
Custom
Colour Tone
:
Normal
√
Size
:
Normal
Auto
Auto
Natural
On
Digital
Progressive
√
Scan Mode
:
Digital NR
:
Move
The main menu is displayed.
Press the ▲ or ▼ button until the Picture is selected.
Picture
TV
) button.
Enter
√
√
Result:
Return
6
English - 36
The following modes are available:
Auto - Natural - Digital - Progressive
Press the ENTER (
) button to confirm.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:21 PM
Page 37
Using the Digital NR (Digital Noise Reduction) Feature
If the signal received by your television is weak, you can activate
this feature to help reduce any static and ghosting that may appear
on the screen.
Picture
TV
Mode
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
Dynamic
Colour Tone
:
Normal
√
Size
:
Normal
√
Scan Mode
:
Auto
√
Digital NR
:
Off
√
Press the ▲ or ▼ button until the Picture is selected.
Result:
Move
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Digital NR is selected.
Press the ENTER (
) button.
) button.
Enter
Select Off or On by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
Return
Picture
TV
Mode
5
√
:
Custom
√
:
Dynamic
Colour Tone
:
Normal
√
Size
:
Normal
√
Scan Mode
:
Auto
√
Digital NR
:
On
Off
On
√
√
Custom
Move
Enter
English - 37
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 38
Setting the Blue Screen Mode
Setup
TV
√
Time
√
Plug & Play
Language
:
English
:
Off
Blue Screen
√
√
Self Focus
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background. If you
wish to continue viewing the poor picture, you must set the Blue
screen mode to Off.
1
√
Result:
▼ More
Move
Enter
Return
Press the MENU (
2
TV
√
Time
√
Plug & Play
Language
:
English
:
Off
Off
On
▼ More
Move
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Blue Screen is selected.
Press the ENTER (
) button.
5
Select Off or On by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
√
) button.
√
Self Focus
Blue Screen
The main menu is displayed.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Setup
) button.
Enter
√
Return
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL (
)” button. To return to normal
viewing, press it again.
English - 38
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 39
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
Sound
TV
1
Press the MENU (
Result:
) button.
The main menu is displayed.
Mode
:
Equalizer
Auto Volume
:
Standard
Off
Music
Movie
Speech
Normal
Custom
√
Off
√
Dolby Virtual :
2
The options available in the Sound group are displayed.
Move
Press the ENTER (
Result:
The Mode is selected.
Press the ENTER (
5
Select the required option by pressing the ▲ or ▼ button.
Result:
Enter
) button.
4
) button again.
The following modes are available:
Standard - Music - Movie - Speech Custom.
6
√
Press the ▲ or ▼ button until the Sound is selected.
Result:
3
√
Press the ENTER (
) button to confirm.
Custom
➢
You can also set these options simply by pressing the
S.MODE (
: Sound Mode) button.
English - 39
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 40
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
Sound
TV
Mode
:
√
Custom
1
Result:
√
Equalizer
Auto Volume
:
Off
√
Dolby Virtual
:
Off
√
Press the MENU (
2
Enter
TV
Return
The main menu is displayed.
Press the ▲ or ▼ button until the Sound is selected.
Result:
Move
) button.
The options available in the Sound group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Equalizer is selected.
Press the ENTER (
) button.
) button.
Equalizer
Result:
R
5
L
100 300 1K
Adjust
œ √ Select
English - 40
3K
The Equalizer menu is displayed with the current
option.
Select the option to be adjusted by pressing the œ or √ button.
Press the ▲ or ▼ button to reach the required setting.
10K
Return
➢
If you make any changes to these settings, the sound
standard is automatically switched to Custom.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 41
Extra Sound Settings
◆ Auto Volume
Each broadcasting station has its own signal conditions, and
so it is not easy for you to adjust the volume every time the
channel is changed. This feature lets you automatically adjust
the volume of the desired channel by lowering the sound
output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
Sound
TV
Mode
:
◆ Dolby Virtual
:
Dolby Virtual
:
Off
Normal
On
Off
Enter
Press the MENU (
Result:
2
Mode
:
Custom
√
√
Auto Volume
:
Off
√
Dolby Virtual
:
Off
Off
On
√
The main menu is displayed.
Move
Enter
The options available in the Sound group are displayed.
3
Press the ENTER (
4
Select the required option (Auto Volume or Dolby Virtual) by
pressing the ▲ or ▼ button.
5
Press the ENTER (
6
To activate each feature, select On by pressing the ▲ or ▼
button. Press the ENTER (
) button.
➢
√
Sound
TV
) button.
Press the ▲ or ▼ button until the Sound is selected.
Result:
√
Return
Equalizer
1
√
√
Auto Volume
Move
This feature converts a monaural sound signal into two
identical left and right channels. Once the Dolby Virtual
is set to Off or On, the setting applies to the sound effects
such as Standard, Music, Movie, and Speech.
Custom
Equalizer
) button.
) button.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol
are trademarks of Dolby
Laboratories.
English - 41
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 42
Setting the Melody Sound
You can hear clear melody sound when the television is powered
on or off.
Setup
TV
▲ More
Melody
:
On
√
1
√
AV Setup
Result:
2
Move
Enter
:
Move
Off
On
On
√
√
AV Setup
Enter
English - 42
Return
The main menu is displayed.
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Melody is selected. Press the
ENTER (
) button.
5
Select the required option (Off or On) by pressing the ▲ or ▼
button.
6
Press the ENTER (
▲ More
Melody
) button.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Return
Setup
TV
Press the MENU (
) button.
) button to confirm.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 43
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular +
NICAM Mono
NICAM ↔ Mono
Mono
(Normal)
NICAM Stereo
NICAM ↔ Mono
Stereo
(Normal)
NICAM Dual I/II
NICAM → NICAM → Mono
Dual I
Dual II (Normal)
→
On-screen indication
→
NICAM
Stereo
Type of broadcast
A2
Stereo
Regular broadcast
(Standard audio)
Mono (Normal use)
Bilingual or Dual I/II
Dual I ↔ Dual II
Stereo
➢
Stereo ↔ Mono
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
English - 43
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 44
Setting and Displaying the Current Time
Setup
TV
√
Time
You can set the television’s clock so that the current time is displayed
by pressing the “INFO (
)” button. You must also set the time if
you wish to use the automatic on or off timers.
➢
√
Plug & Play
Language
:
English
√
√
Self Focus
Blue Screen
:
√
Off
▼ More
1
Move
Enter
When pressing the “ I ” button (On/Off) on the front of
the television, the clock setting will be reset.
Press the MENU (
Result:
2
Time
TV
Clock
:
-- : --
√
Sleep Timer
:
Off
√
On Timer
:
-- : --
√
Off Timer
:
-- : --
√
Move
Enter
The main menu is displayed.
Press the ▲ or ▼ button until the Setup is selected.
Result:
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Time is selected. Press the
ENTER (
) button.
Result:
Return
) button.
The options available in the Time group are displayed
with Clock is selected.
5
Press the ENTER (
6
Press the ¦ or ‹ button to move to the Hour or Minute. Set
these by pressing the ▲ or ▼ button.
) button.
Clock
TV
√ Move
) button.
Return
Hour
Minute
11
00
Adjust
English - 44
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 45
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode.
Setup
TV
√
Time
√
Plug & Play
1
Press the MENU (
Result:
) button.
Language
The main menu is displayed.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Press the ENTER (
4
Press the ▲ or ▼ button until the Time is selected. Press the
ENTER (
) button.
√
Move
Enter
Return
) button.
The options available in the Time group are displayed.
5
Press the ▲ or ▼ button until the Sleep Timer is selected. Press
the ENTER (
) button.
6
Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for
staying on by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm.
Time
Clock
:
11 : 35
√
Sleep Timer
:
Off
√
On Timer
:
-- : --
√
Off Timer
:
-- : --
√
Move
➢
Off
√
TV
Result:
:
√
▼ More
The options available in the Setup group are displayed.
3
English
Self Focus
Blue Screen
2
:
◆ You can also set these options simply by pressing the
SLEEP ( ) button.
◆ If the sleep timer is not yet set, Off is displayed.
If the sleep timer is already set, the remaining time
before which the television switches to Standby mode
is displayed.
Enter
Return
Time
TV
Clock
:
11 : 35
√
Sleep Timer
:
√
On Timer
:
Off Timer
:
Off
30
-- 60
: -90
--120
: -150
180
Move
Enter
Off
English - 45
√
√
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 46
Switching the Television On and Off Automatically
You can set the On/Off timers so that the television will:
√
◆ Switch on automatically and tune to the channel of your
choice at the time you select
√
◆ Switch off automatically at the time you select
Setup
TV
Time
Plug & Play
Language
:
English
:
Off
√
➢
√
Self Focus
Blue Screen
√
▼ More
Move
Enter
Return
1
Press the MENU (
Time
TV
11 : 35
√
:
30
√
:
-- : --
√
:
-- : --
√
Clock
:
Sleep Timer
On Timer
Off Timer
Move
Enter
Return
Result:
Result:
Minute
06
30
Prog.
Volume
P1
10
The main menu is displayed.
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Time is selected. Press the
ENTER (
) button.
Result:
Hour
) button.
Press the ▲ or ▼ button until the Setup is selected.
2
On Timer
TV
The first step is to set the television’s clock (refer to “Setting
and Displaying the Current Time” on page 44). If you have
not yet set the clock, the message Set the clock first
is displayed.
) button.
The options available in the Time group are displayed.
5
Press the ▲ or ▼ button until the On Timer is selected. Press the
ENTER (
) button.
The options available in the On Timer group are
Result:
displayed.
6
Select the Hour, Minute, Prog. (programme number), or Volume.
Press the œ or √ button to set these by pressing the ▲ or ▼
button.
7
To activate the On Timer with the settings satisfied, select
Activation to by pressing the œ or √ button,then select Yes by
pressing the ▲ or ▼ button.
8
Press the MENU (
) button.
The options available in the Time group are displayed
Result:
again.
9
Press the ▲ or ▼ button until the Off Timer is selected. Press
the ENTER (
) button.
The Off Timer menu is displayed.
Result:
10
Set the Off Timer as methods for On Timer setting.
Activation
Yes
œ √ Move
Adjust
Return
Time
TV
Clock
:
11 : 35
√
Sleep Timer
:
30
√
On Timer
:
06 : 30
√
Off Timer
:
-- : --
√
Move
Enter
Return
Off Timer
TV
Hour
Minute
23
30
➢
Activation
Yes
œ √ Move
Adjust
English - 46
Return
Absent Power Off
When you set the timer “On”, your television will
eventually be turned off, if you do not operate any controls
during the 3 hours after the TV is turned on by timer.
This function is available in only the timer “On” mode and
will prevent a leakage accident or overheating, caused by
your TV left on for a long time due to the timer “On”
(when you are away on holiday, for example).
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 47
Viewing an External Signal Source
Use the remote control to switch between viewing signals from
connected equipment, such as VCR, DVD, Set-Top Box and the TV
source (broadcast or cable)
Input
TV
Source List
:
√
TV
√
Edit Name
1
Press the MENU (
Result:
2
3
The options available in the Input group are
displayed.
Press the ENTER (
Result:
) button.
) button.
Move
Enter
Return
The Source List is selected.
Press the ENTER (
) button again.
Source List
TV
TV
4
Press the ▲ or ▼ button to select signal source, then press the
ENTER (
) button.
Ext.1
: ------
Ext.2
: ------
➢
Ext.3
: ------
AV
: ------
◆ When you connect equipment to the TV, you can choose
between the following sets of jacks : Ext.1, Ext.2,
Ext.3, or Component on the TV’s rear panel, and AV or
S-Video on the TV’s side panel.
▼ More
Move
Enter
Return
◆ You can select these options simply by pressing the
SOURCE (
) button.
Input
TV
5
Press the MENU (
Result:
) button.
Press the ▲ or ▼ button until the Edit Name is selected.
Press the ENTER (
) button.
7
Press the ▲ or ▼ button to select the external source to be edited.
Press the ENTER (
) button.
The device names available are listed.
Result:
VCR - DVD - Cable STB - HD STB - Sat. STB AV Receiver - DVD Receiver - Game Camcorder - DVD Combo - DHR (DVD HDD
Recorder) - PC.
Select the required device by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm.
Move
√
TV
√
Enter
Return
Edit Name
TV
√
S-Video
: -- ----- - ---VCR
: - - - -DVD
---Cable STB
: - - -HD
- -STB
--Sat. STB
: -AV
- - Receiver
----▼
: --------
Component
: --------
√
Ext.1
Ext.2
Ext.3
AV
Move
➢
:
Edit Name
The options available in the Input group are
displayed again.
6
8
Source List
Enter
If you change the external source while viewing, pictures
might take a short period of time to be switched.
English - 47
√
√
√
√
Return
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 48
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
➢
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a coloured heading (FASTEXT system)
English - 48
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 49
Displaying the Teletext Information
You can display Teletext information at any time on your television.
Teletext information to be displayed correctly,
☛ For
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
Select the channel providing the Teletext service using the P
or
button.
2
Press the TTX/MIX (
) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed
Result:
at any time by pressing the
(index) button.
3
Press the TTX/MIX (
) button again.
The screen will be split into two. This Double Teletext
Result:
feature lets you view the actual broadcast and teletext
information separately on the screen.
4
If you wish to display the actual broadcast at the same time as
the teletext page, press the TTX/MIX (
) button again.
5
Press the TV (
) button again to exit from the teletext display.
English - 49
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 50
Selecting Display Options
When you have displayed a Teletext page, you can select various
options to suit your requirements.
To display...
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page
(sub-page)
◆ The broadcast when searching for a page
(cancel)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
➢
English - 50
Press the...
To return to the normal display after using the reveal or
size feature, press the TV (
) button.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 51
Selecting a Teletext Page
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by
pressing the corresponding numeric buttons.
Result:
The current page counter is incremented and the
page is then displayed. If the selected page is linked
with several secondary pages, the secondary pages
are displayed in sequence. To freeze the display on a
given page, press the
(hold). Press it again to
resume.
2
If the FASTEXT system is used by the broadcasting company,
the different topics covered on a Teletext page are colour-coded
and can be selected by pressing the coloured buttons on the
remote control.
Press the coloured button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result:
The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
◆ Press the
(sub-page) button.
Result:
The available subpages appear.
◆ Select the required sub-page. Sub-pages can be scrolled by
pressing the Red or Green button.
5
When you have finished, press the TV (
your normal broadcast.
) button to return to
English - 51
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 52
Storing Teletext Pages (depending on the model)
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
Result:
➢
English - 52
button.
Four 3-digit numbers are displayed in different
colours.
The
button is used to switch between the LIST and
FLOF modes.
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a
different coloured button each time.
5
Press the
(store) button until the corresponding blocks blink.
BP68-00457A(J60B_Euro_ENG)
2004/12/29
05:35 PM
Page 53
Connecting to the External Input/Outputs
➢
EXT-1 is used for the equipment with an RGB output, such as video game
devices or video disc players.
VCR
②
①
Rear of the TV
DVD
③
or
Decoder /
Video game device
or
Video disc player
① This end can be fitted with:
◆ A SCART connector
◆ An S-Video connector and two audio RCA connectors (L+R); EXT-2
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
② If you have a second VCR and wish to copy cassette tape, connect the
Satellite receiver
➃
source VCR to EXT-1 and the target VCR to EXT-2 so that you can redirect
the signal from EXT-1 to EXT-2.
③ If you have a decoder, connect the decoder to the VCR and the VCR to the
television.
➃ When you wish to record a programme, connect the receiver to EXT-1 and
the VCR to EXT-2 so that you can redirect the signal from EXT-1 to EXT-2.
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
English - 53
BP68-00457A(J60B_Euro_ENG)
2004/12/29
05:35 PM
Page 54
Connecting to the Audio Output
➢
The RCA (AUDIO-L and R) connectors are used for equipment, such as an audio
system (to take full advantage of the Surround sound effect).
Rear of the TV
Audio system
English - 54
BP68-00457A(J60B_Euro_ENG)
2004/12/29
05:35 PM
Page 55
Connecting to the RCA Input
➢
The RCA (VIDEO + AUDIO-L and R) connectors are used for the equipment, such as camcorders,
video disc players, and some video game devices.
Side of the TV
(depending on the model)
Camcorder
Video game device
Video disc player
English - 55
BP68-00457A(J60B_Euro_ENG)
2004/12/29
05:35 PM
Page 56
Connecting to the S-Video Input
➢
The S-VIDEO (or S-VIDEO INPUT) and RCA (AUDIO-L and R) connectors are used for equipment
with an S-Video output, such as a camcorder or VCR.
Side of the TV
(depending on the model)
①
Camcorder
and
VCR
① To play pictures and sound, both the S-VIDEO (or S-VIDEO INPUT) and RCA connectors must be used.
English - 56
BP68-00457A(J60B_Euro_ENG)
2004/12/29
05:35 PM
Page 57
Connecting to the Component Input
Rear of the TV
DVD
DTV receiver
➢
The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output.
(480i, 480p, 576i, 576p, 1080i)
English - 57
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 58
Redirecting an Input to the External Output
Your television enables you to choose which audio/video signals
are output to the external connector.
Setup
TV
▲ More
Melody
:
√
On
1
√
AV Setup
Result:
2
Move
Enter
√
TV
Ext.2
√
Monitor Out
Ext.3
:
TV
Ext.1
Enter
The main menu is displayed.
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button to select AV Setup. Press the ENTER
(
) button.
Result:
√
5
Move
) button.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Return
AV Setup
TV
Press the MENU (
The AV Setup menu is displayed with the Ext.3 is
selected.
Press the ENTER (
) button. Select the source to be directed to
the output of Ext.3 by pressing the ▲ or ▼ button.
➢
Return
) button.
Ext.1 : Default (TV)
Ext.2 : Default (Monitor Out)
Ext.3 : Variable (TV, Ext.1, Ext.2, or AV)
AV Setup
TV
6
Ext.1
√
TV
Ext.2
√
Monitor Out
Ext.3
:
TV
TV
Ext.1
Ext.2
AV
Move
Enter
English - 58
√
Return
Press the ENTER (
) button to confirm your choice.
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 59
Programming the Remote Control for Other Components
Your TV comes equipped with a universal remote control.
In addition to controlling the TV, the universal remote control can
also operate a Set-Top Box, VCR, Cable box and DVD (even if your
VCR, Cable box and DVD are made by manufacturers other than
Samsung).
➢
The remote control might not be compatible with all
VCRs, DVD players and Cable boxes.
1
Turn off your VCR (Cable box or DVD).
2
Press the SELECT button to switch the remote control to the VCR
(CABLE or DVD) mode.
➢
The remote control has five modes : TV, STB, VCR,
CABLE, and DVD
3
Press the SET button.
4
Enter 3 digits of the VCR (Cable box or DVD) code listed on next
page for your VCR (Cable box or DVD).
Example: To enter the code “6”, press 0, 0, and 6.
To enter the code “76”, press 0, 7, and 6.
5
Press the POWER ( ) button. Your VCR (Cable box or DVD)
should turn on. If it turns on, your remote control is now set
correctly.
➢
6
If it does not turn on, repeat steps above, but try one of the
other codes listed for the brand of particular yours.
Once your remote control is set up, press the SELECT button any
time you want to use the remote control to operate VCR (Cable
box or DVD).
➢
◆ When your remote control is in the STB, VCR, CABLE,
and DVD mode, the volume buttons still control your
television’s volume.
◆ When your remote control is in the TV mode, the VCR or
DVD control buttons (rewind, stop, play/pause and fast
forword) still operate your VCR or DVD.
English - 59
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 60
Programming the Remote Control for Other Components
VCR Remote Control Codes
Cable Box (CATV) Remote Control Codes
DVD Remote Control Codes
English - 60
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 61
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “ I ” button (On/Off) and the
POWER ( ) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE (
control has been pressed.
) button on the remote
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference is often occurs to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
English - 61
BP68-00457A(J60B_Euro_ENG)
2004/12/28
Memo
English - 62
01:22 PM
Page 62
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 63
Memo
English - 63
BP68-00457A(J60B_Euro_ENG)
2004/12/28
01:22 PM
Page 64
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product indicates
that a faulty condition may be present.
ELECTRONICS
BP68-00457A-00
Download PDF