Samsung | LW17E24C | Samsung LW17E24C Benutzerhandbuch

LCD TV
LW15E23CB
LW17E24CB
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT
REMOVE REAR COVER, NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING:
The lightning flash and arrow head
within the triangle is a warning
sign alerting you of “dangerous
voltage” inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
☛ The main voltage is indicated on the rear of your set and the frequency is 50 or 60 Hz.
Information in this document is subject to change without notice.
© 2002 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly
forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this material.
The Samsung logo is the registered trademarks of Samsung Electronics Co., Ltd.; VESA, DPMS and DDC are
registered trademarks of Video Electronics Standard Association; the ENERGY STAR name and logo are registered
trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR Partner, Samsung Electronics Co.,
Ltd. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All other product
names mentioned herein may be the trademarks or registered trademarks of their respective owners.
European Notice
Products with the CE Marking comply with both the EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the
Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these
directives implies conformity to the following European Norms:
■
EN55022:1998 – Radio Frequency Interference
■
EN55024:1998 – Electromagnetic Immunity
■
EN61000-3-2:1995 + A1 + A2 – Power Line Harmonics
■
EN61000-3-3:1995 – Voltage Fluctuations
■
EN60950 – Product Safety.
English-2
Safety Instructions
These illustrations represent precautions concerning your TV.
75%
10%
35¡
H
H
5¡
œ Do NOT expose the TV to extreme
temperature conditions or to extreme
humidity conditions.
Do NOT expose the TV to direct √
sunlight.
œ Do NOT expose the TV to any
liquids.
If the TV is broken, do not try to √
repair it yourself. Contact qualified
service personnel.
œ During a storm conditions (especially
when there is lightning) unplug the
TV from the mains socket and aerial.
Keep all power adaptors apart. √
Possible fire hazard.
œ Always keep the power adaptor in a
well-ventilated area.
Remove and discard the plastic √
cover from the power adaptor before
use. Possible fire hazard.
œ Keep the power adaptor away from
any other heater. Possible fire hazard.
If the remote control is not used for a √
long period of time, remove the
batteries and store it in a cool, dry
place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
English-3
Contents
◆ FOREWORD
■
■
Caution ..........................................................................................................
Safety Instructions ..........................................................................................
◆ CONNECTING
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
PREPARING YOUR TV
Viewing the Control Panel..............................................................................
Viewing the Connection Panel .......................................................................
- Connecting an Aerial or Cable Television Network.....................................
- Connecting DTV Set-Top Box, VCR, or DVD ..............................................
- Connecting Computer ...............................................................................
- Connecting External A/V Devices ...............................................................
- Kensington Slot ...........................................................................................
Viewing Pictures From External Sources .........................................................
Attaching a Wall or Arm Mounting Device ....................................................
Installing VESA Compliant Mounting Device..................................................
Inserting the Batteries in the Remote Control..................................................
Viewing the Remote Control (All Functions Except Teletext)...........................
Viewing the Remote Control (Teletext Functions) ...........................................
Switching On and Off ....................................................................................
Placing in Standby Mode ...............................................................................
Becoming Familiar with the Remote Control..................................................
Choosing Your Language ................................................................................
◆ SETTING
■
AND
THE
2
3
6
7
8
8
8
9
9
9
10
10
11
12
13
14
14
15
16
CHANNELS
Storing Channels Automatically......................................................................
Storing Channels Manually.............................................................................
Giving Channels Names.................................................................................
Skipping Unwanted Channels ........................................................................
Fine Tuning Channel Reception......................................................................
Sorting the Stored Channels ...........................................................................
17
18
19
20
20
21
◆ USING
■
■
■
■
English-4
THE VARIOUS FUNCTIONS (continued)
Changing the Picture Standard .......................................................................
Adjusting the Picture Settings .........................................................................
Selecting the Picture Format...........................................................................
Freezing the Current Picture...........................................................................
22
22
23
23
Contents (continued)
◆ USING
■
■
■
■
■
■
■
◆ USING
■
■
■
■
■
■
■
■
■
■
VARIOUS FUNCTIONS
THE
THE
24
24
25
25
26
27
27
PC FUNCTIONS
Setting up Your PC Softerware (Based on Windows 98)..................................
Adjusting the Brightness and Contrast ............................................................
Adjusting the Image Quality...........................................................................
Changing the Image Position..........................................................................
Adjusting the Color ........................................................................................
Initializing the Image Settings.........................................................................
◆ USING
■
THE
Changing the Sound Standard ........................................................................
Adjusting the Sound Settings ..........................................................................
Enjoying the Dolby Sound..............................................................................
Selecting the Sound Mode..............................................................................
Viewing the Picture In Picture (PIP) ................................................................
Switching Off Automatically...........................................................................
Displaying Information...................................................................................
28
29
30
31
32
33
TELETEXT FEATURE
Teletext Feature ..............................................................................................
Displaying the Teletext Information ................................................................
Selecting a Page by Number ..........................................................................
Using FLOF to Select a Page ..........................................................................
Storing Teletext Pages .....................................................................................
34
35
36
37
37
◆ RECOMMENDATIONS FOR USE
■
■
■
■
■
■
Troubleshooting: Before Contacting Service Personnel ...................................
Power Saver ...................................................................................................
Technical and Environmental Specifications...................................................
Display Modes ...............................................................................................
Maintenance of Your Telelvision.....................................................................
Wiring the Mains Power Supply Plug (UK Only) ............................................
Symbols
Press
☛
➢
Important
Note
38
39
40
41
41
42
English-5
Viewing the Control Panel
ΠPC
Selects PC source
´ PIP
Activates PIP (Picture-In-Picture) directly in PC
mode.
ˇ TV/VIDEO
Displays a menu of all of the available input
sources (TV/Video1/Video2/S-Video).
¨ MUTE
Temporary sound switch off
¦ / ‹VOL
Ø VOL¦
Moves the selector left or right on the OSD.
Increases or decreases the level of audio volume
and the values of the selected function.
∏ EXIT
Exits from the on-screen menu.
” AUTO
Allows you experience the quality of displayed
picture. The values of fine, coarse and position are
adjusted automatically. (It works PC mode only.)
’
ˆ MENU
Opens the on-screen menu.
œ / CHƒ
ƒ
Ø CHœ
Moves the selector up or down on the OSD.
Increases or decreases the channel number.
POWER
Turns ON/OFF your set.
˝ Power Indicator
Ô Remote Control Sensor
 Speakers
English-6
Viewing the Connection Panel (continued)
Option
Power Input
you connect an audio or video system to your set,
☛ Whenever
ensure that all elements are switched off. Refer to the
documentation supplied with your equipment for detailed
connection instructions and associated safety precautions.
English-7
Viewing the Connection Panel (continued)
ΠConnecting an Aerial or Cable Television Network (depending on the model)
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
´ Connecting DTV Set-Top Box, VCR, or DVD
- Connect the DTV, VCR, or DVD SCART cable to the SCART connector of the DTV, VCR, or DVD.
- If you wish to connect both the DTV Set-Top Box and VCR (or DVD), you should connect the DTV Set-Top
Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.
ˇ Connecting Computer
- Connect the 15 Pin D-SUB connector to the PC video connector.
- Connect the stereo audio cable to ”Audio (ST)” on the rear of your set and the other end to “Audio Out” of
the sound card on your computer.
- If necessary, please install monitor driver contained on the accompanied CD. For more information, refer to
the driver installation instructions included with your CD package.
➣
15 Pin D-SUB connector
English-8
Pin
Separate H/V
Composite H/V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC return)
Grounding - Red (R)
Grounding - Green (G)
Grounding - Blue (B)
No connection
Grounding - Sync. / Self test
Grounding
DDC - SDA (Date)
Horizontal Sync.
Vertical Sync.
DDC - SCL (Clock)
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC return)
Grounding - Red (R)
Grounding - Green (G)
Grounding - Blue (B)
No connection
Grounding - Sync. / Self test
Grounding
DDC - SDA (Date)
Horizontal/Vertical Sync.
Not used
DDC - SCL (Clock)
Viewing the Connection Panel (continued)
¨ Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD, or Camcorder.
- Connect RCA audio cables to “AUDIO (L)” and “AUDIO (R)” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output (Ø) on the rear of your set. While the headphone is
connected, the sound from the built-in speakers will be disabled.
ˆ Kensington Slot
- This television has been designed to apply a burglarproof lock.
➢
Retractable Stand
15
Tilt the screen until you feel comfortable.
The maximum tilt angle is 15 degree to the
backward direction. Please do not tilt the
television other than specified range.
Excessive force to tilt the television
other than specified range may give
permanent damage to the mechanical
part of the stand.
Viewing Pictures From External Sources
Once you have connected up your various audio and video
systems, you can view the different sources by selecting the
appropriate input.
Power
TV/VIDEO
1
Check that all the necessary connections have been made (refer
to pages 8 and 9 for further details).
2
Switch your set on and if necessary, press the TV/VIDEO button
repeatedly. The input sources are displayed in the following
order:
PC
DISPLAY
STILL
P.STD
S.STD
MUTE
EXIT
TV - VIDEO1 - VIDEO2 - S-VIDEO.
-/--
English-9
TTX/MIX
PRE-CH
AUTO
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
CANCEL
PIP
ON
Attaching a Wall or Arm Mounting Device
This television supports VESA mounting standard for use with various VESA mounting devices. To install
any VESA mounting device, please follow the instructions given.
(A)
(B)
1
Lay the television face-down on a flat surface with a cushion or other soft materials to protect the screen.
2
Remove all cable connected on the television.
3
Remove the four screws and then remove the Stand from the television.
4
Connect all cable you removed at step 2.
5
Now you are ready to install Wall/Arm mounting device depending on your applications.
Installing VESA Compliant Mounting Device
Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with the four
screws that came with the arm-type base, wall mount hanger or other bases.
Rear cover mounting pad
Mounting
English-10
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase your set
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing the
symbol downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to
respect the polarities:
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
3
Replace the cover by aligning it with the base of the remote control
and pressing it back into place.
➣
Do not mix battery types, i.e. alkaline and manganese.
English-11
Viewing the Remote Control (All Functions Except Teletext)
Select to the PC mode directly
Power
Television On/Off
TV/VIDEO
PC
DISPLAY
STILL
Available sources selection
Display the setting information
Picture freeze
P.STD
S.STD
Picture effect selection
Sound effect selection
Next channel
Menu display and
change confirmation
P
MENU
Volume decrease
Volume increase
P
Previous channel
MUTE
EXIT
Temporary sound switch-off
Numeric buttons for
direct channel access
Exit from the OSD/
Picture-In-Picture Off
1
2
3
4
5
6
7
8
9
PRE-CH
-/--
One/Two-digit channel selection
0
Previous channel
TTX/MIX
Sound mode selection
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
Self-adjust to the incoming
video signal
Automatic switch-off
Picture size selection
ON
Picture-In-Picture On/
PIP source selection
PIP location selection
PIP size selection
➣
English-12
The performance of the remote control may be affected by bright light.
Viewing the Remote Control (Teletext Functions)
Power
TV/VIDEO
PC
DISPLAY
P.STD
STILL
S.STD
Teletext next page
Programme selection by name
P
MENU
P
Teletext previous page
MUTE
EXIT
Exit from the Teletext display
1
2
3
4
5
6
7
8
9
PRE-CH
-/-0
Teletext display/
mix both teletext information
and the normal broadcast
Teletext hold
Teletext reveal
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
Teletext store
Teletext size selection
CANCEL
Teletext mode selection
(List or Flof)
Teletext cancel
ON
Teletext sub-page
Fastext topic selection
English-13
Switching On and Off
The mains lead is attached to the rear of your set.
☛
Power
TV/VIDEO
PC
DISPLAY
P.STD
If you have purchased this set in the United Kingdom,
refer to page 42 for further instructions on plug wiring.
STILL
S.STD
1
Plug the mains lead into an appropriate socket.
Result:
A Standby indicator lights off on the front panel.
Power
2
3
Press the Power (
) button to switch on.
TV/VIDEO
DISPLAY
STILL
) button again.
TV/VIDEO
P.STD
MUTE
Power
PC
To switch off, press the Power (
PC
DISPLAY
S.STD
STILL
EXIT
P.STD
S.STD
PRE-CH
-/--
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
MUTE
CANCEL
EXIT
MUTE
PIP
EXIT
Placing in Standby Mode
ON
SIZE
LOCATE
Your set can be placed in Standby mode, in order to reduce the power
consumption.
PRE-CH
-/-Power
TV/VIDEO
PC
DISPLAY
P.STD
STILL
The Standby mode can be useful when you wish to interrupt viewing
PRE-CH
-/-temporarily (during a TTX/MIX
meal, for example).
AUTO
Power
S.STD
2
SLEEP
I/II LIST/FLOF CANCEL
To switch back on,
the DUAL
Power
P.SIZEsimply press
PIP ( ) button again or a
SUBPAGE
numeric button.
ON TV/VIDEO
PC
DISPLAY
TV/VIDEO
➣
EXIT
AUTO
DUAL I/II
Press the PowerSLEEP
( ) button.
P.STD
MUTE
TTX/MIX
LIST/FLOF
1
PC
DISPLAY
P.SIZE
SIZE
CANCEL
STILL
Power
S.STDSUBPAGE
LOCATE
MUTE
TTX/MIX
S.STD
EXIT
AUTO
MUTE
P.SIZE
S.STD
PRE-CH
-/--
SLEEP
ON
Do not leave your set in Standby modeP.STD
for long periods of
SIZE
LOCATE
time (when youPower
are away on holiday, for example). Turn off
by pressing the ( ) button. It is best to unplug the set from
the mains andTV/VIDEO
aerial. PC
DISPLAY
STILL
P.STD
STILL
PIP
DUAL I/II LIST/FLOF
English-14
CANCEL
SUBPAGE
PIP
SIZE
LOCATE
ON
MUTE
-/--
PRE-CH
EXIT
EXIT
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up your set using the on-screen menu system
Power
Power
Power PC
TV/VIDEO
DISPLAY
TV/VIDEO
PC
DISPLAY
DISPLA
Button
S.STD
▲
P
Viewing Function
Menu Function
Used to display the next
stored channel.
Used to select the previous
menu option.
Used to display the
previous stored channel.
Used to select the next menu
option.
P
MENU
Power
P
▼
MUTE
EXIT
EXIT
TV/VIDEO
PRE-CH
P.STD
PC
DISPLAY
STILL
P
MUTE
EXIT
Used to switch repeatedly between the last two channels
displayed. (PRE-CH; Previous Channel)
1
2
3
Used to display the corresponding channels.
4
5
6
7
8
S.STD
PRE-CH
-/-0
to
9
PRE-CH
AUTO
-/-TTX/MIX
-/--
TTX/MIX DUAL I/II LIST/FLOF
SLEEP
PC
S.STD
DISPLAY S.STD
STILL
PC
P.STD
MUTE
STILL
STILL
P.STD
.STD
P.STD
TV/VIDEO
ower
VIDEO
The following table presents the most frequently used buttons and
their functions.
SLEEP
P.SIZE
AUTO
CANCEL
DUAL I/IISUBPAGE
LIST/FLOF PIP
CANCEL
DISPLAY
P.SIZE
STILL
ON
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
0
PIP
SUBPAGELOCATE
SIZE
TTX/MIX
ON
SIZE
STD
LOCATE
S.STD
Used to decrease the
volume.
Power
MUTE
EXIT
Used to...
◆ Display a submenu containing
selections for the current
menu option.
Power ◆ Search forwards manually
for channels
◆ Reduce a menu option value.
TV/VIDEO TV/VIDEO
PC
Used to increase the
volume.
P.STD
UTE
EXIT
Used to switch the sound off temporarily.
-/--
➣
SLEEP
EXIT
DISPLAY
STILL
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
.SIZE
SUBPAGE
SUBP
AGE
PIP
SIZE
LOCATE
LOCA
TE
DUAL I/II LIST/FLOF
STILL
Used to return to the previous
menu or normal viewing.
CANCEL
MUTEthe menu
MUTE system and return
EXITto normal
EXIT
Used to exit from
viewing directly.
SUBPAGE
PIP
ON
X/MIX
AUTO
EEP
DUAL I/II LIST/FLOF
SIZE
SUBPAGE
LOCATE
CANCEL
PIP
ON
SIZE
SIZE
-/--
-/--
PRE-CH
PRE-CH
AUTO
AUTO
LOCATE
TTX/MIX
TTX/MIX
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
CANCEL
CANCEL
ON
To turnPRE-CH
the sound back on, press this button again, or
press the
- or
+ button.
Used to displayAUTO
the
on-screen menu system.
PRE-CH
P.SIZE
-/--
DISPLAY
PC
AUTO
AUT
Used to...
◆ Display a submenu containing
P.STD
S.STD
selectionsS.STD
for the current
menu option.
◆ Search backwards manually
for channels
◆ Increase a menu option value.
MUTE
TTX/MIX
MENU
9
PRE-CH
-/--
English-15
Choosing Your Language
Power
TV/VIDEO
PC
DISPLAY
P.STD
.STD
Power
STILL
S.STD
Power
When you start using your set for the first time, you must select the
language which
will be
used
for
displaying
and indications.
TV/VIDEO
TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILLmenus
STILL
Power
P
1
MENU
P.STD
Press the
MENUP.STD
button.
Result:
S.STD
The main menu is displayed.
Power
S.STD
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
STILL
S.STD
S.STD
EXIT
EXIT
PRE-CH
PRE-CH
AUTO
AUTO
P
2
MUTE
EXIT
Result:
P.STD
The options available in the Function group are
displayed.
3
Press the
Off
4
Press the P▼ or P▲ button to select the Language.
Normal
PRE-CH
English
5
Select a particular language by pressing the
repeatedly.
MUTE
MUTE
EXIT
EXIT
6
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
Function
Sleep timer
PIP
Size
-/-Language
Press the P▼ or P▲ button to select the Function.
P.STD
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
CANCEL
- or
+ button.
MUTE
PIP
- or
+ button
MUTE
ON
SIZE
LOCATE
-/--
TTX/MIX
SLEEP
-/--
TTX/MIX
PRE-CH
PRE-CH
AUTO
AUTO
-/--
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
CANCEL
TTX/MIX
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
SIZE
-/--
TTX/MIX
PIP
ON
SLEEP
ON
SIZE
LOCATE
LOCATE
P.SIZE
DUAL
SLEEP
I/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
PIP
SUBPAGE SUBPAGE
SIZE
English-16
CANCEL
PIP
ON
ON
SIZE
LOCATE
LOCATE
Storing Channels Automatically
You can scan for the frequency ranges available to you (and
Power Power
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers.
However
you can
sort numbers
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
STILL manually and
PoweryouPower
clear any channels
do not wish to watch.
1
P.STD
P.STD
TV/VIDEO TV/VIDEO
PC
Press the MENU button.
Result:
2
S.STD
DISPLAY
STILL
S.STD
STILL
Power Power
The main menu is displayed.
P.STD
P.STD
S.STD
S.STD
Channel
Press the P▼ or P▲ button to select the Channel.
TV/VIDEO TV/VIDEO
PC
Result:
DISPLAY
PC
DISPLAY
STILL
STILL
The options available in the Channel group are displayed.
3 Power
Press Power
the
- or
Result:
4
DISPLAY
PC
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
+ button. P.STD
P.STD
S.STD
Country
Search
S.STD
The Auto store is selected.
TV/VIDEO TV/VIDEO
PC
Press the
DISPLAY
PC
- or
DISPLAY
STILL
STILL
+ button again.
Result: MUTEThe options
store group are
MUTE available in the
EXITAuto EXIT
P.STD
S.STD
S.STD
displayed with the Country is selected.
Channel
P.STD
Country
Search
5
Select your country by pressing the
- or
+ button repeatedly.
MUTE
MUTE
EXIT
EXIT
The following
countries
are available:
Belgie - Deutschland - Espania - France - Italia - Nederland
- Schweiz - Sverige - UK - East Europe.
6
Press the P▼ or P▲ button to select
MUTEthe Search,
MUTE and then press
EXIT the EXIT
- or
+ button.
Result:
MUTE
➣
7
MUTE
TTX/MIX
TTX/MIX
EXIT
EXIT
AUTO
UK
P1
43MHz
VHF-L
AUTO
PRE-CH
PRE-CH
-/-To -/-stop the search
before it has
finished,
press the EXIT button.
P.SIZE
TTX/MIX
Search
Program
Frequency
Band
The search will end automatically. Channels are sorted
PRE-CH
-/-and stored
in an order PRE-CH
which reflects
their position in the
frequency range, (with lowest first and highest last).
The programme originally selected is then displayed.
-/--
When the
channels
have
beenI/II stored,
you can:
SLEEP
DUAL
SLEEP
I/II LIST/FLOF
DUAL
LIST/FLOF
CANCEL
CANCEL
TTX/MIXchannels
TTX/MIX
AUTO
AUTO
◆ Change
◆ Assign a name to the stored channels
(refer
-/--/-- to page 19)PRE-CH
SUBPAGE
P.SIZE
P.SIZE(refer
PIP
PIP
◆ Clear
a channel
to pageSUBPAGE
20)
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
◆ FineSLEEP
tune channel
reception
if necessary
(refer to page 20)
ON
ON
◆ Sort them in the order required
(refer
to
page
TTX/MIX TTX/MIX 21)
AUTO
-/--
UK
P.SIZE
SIZE
SIZE
LOCATE
PIP
SUBPAGE SUBPAGE
PRE-CH
SIZE
-/--
TTX/MIX
AUTO
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
SIZE
LOCATE
PIP
ON
ON
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
PRE-CH
SIZE
LOCATE
LOCATE
P.SIZE
AUTO
CANCEL
P.SIZE
PIP
SUBPAGE SUBPAGE
SIZE
PRE-CH
AUTO
CANCEL
PIP
ON
ON
SIZE
LOCATE
LOCATE
PIP
ON
ON
SIZE
LOCATE
LOCATE
English-17
Storing Channels Manually
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
You can store up to 100 channels, including those received via cable
Power
Power
networks. When
storing
channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The
programme
each
TV/VIDEO
TV/VIDEO
PC number
DISPLAY
PC of DISPLAY
STILL stored
STILLchannel which you
Power
Power
wish to identify
P.STD
TV/VIDEO TV/VIDEO
PC
1
Channel
Colour system
Sound system
Search
Channel
Program
Store
AUTO
BG
471MHz
C4
P1
?
AUTO
BG
471MHz
C4
P1
?
2
TV/VIDEO TV/VIDEO
PC
Result:
Colour system
Sound system
Search
Channel
Program
Store
Power
Power
STILL
S.STD
S.STD
P.STD
The color standards are displayed in the following order:
STILL Power
Power
Press
P▼ or P▲ button toEXIT
select the
MUTE the MUTE
EXITSound system. Indicate the
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
P.STD
P.STD
S.STD
sound standard
required
by pressing the
- S.STD
or
+ button
repeatedly.
-/--
Result:
7
DISPLAY
STILL
If necessary, indicate the broadcasting standard required by pressing
MUTE
EXIT
EXIT
the MUTE
- or
Power+ button
Power repeatedly.
TV/VIDEO
PC - SECAM
DISPLAY
PC - NT4.43.
DISPLAY
STILL
AUTO -TV/VIDEO
PAL
6
DISPLAY
PC
The options available in the Manual store group are
MUTE
MUTE
EXIT
EXIT
displayed
with the Colour
system
is selected.
P.STD
5
PRE-CH
-/--
PRE-CH
P.STD
P.STD
The sound standards are displayed in the
following
order:
BG - DK - I - L.
-/-TTX/MIX
PRE-CH
AUTOPower
AUTOPower
MUTE
MUTE
TTX/MIX PRE-CH
EXIT
S.STD
STILL
If you do not know the channel numbers, press the P▼ or P▲ button
S.STD
- or
+
S.STD
P.STD PIP P.STD
PRE-CHSUBPAGE
PRE-CH
-/-- P.SIZE-/-- P.SIZE
SUBPAGE
PIP
SLEEP
DUAL
SLEEP
I/II Search.
LIST/FLOF
DUAL I/II Start
LIST/FLOF
CANCEL
CANCEL
to select
the
the search
by pressing
the
PC
DISPLAY
PC
DISPLAY
STILL ONSTILL
ON
button. TV/VIDEO TV/VIDEO
S
S.
EXIT
If you know the channel number to be stored, press the P▼ or P▲
button to
select DUAL
the
Channel.
Indicate
the required
by DISPLAY
TV/VIDEO
TV/VIDEO
PCnumber
DISPLAY
PC
STILL
SLEEP
SLEEPI/II LIST/FLOF
DUAL
CANCEL
CANCEL
TTX/MIX TTX/MIX
AUTOI/II LIST/FLOF
AUTO
pressing the
Power - or
Power + button.
SIZE
SIZE
LOCATE
LOCATE
TTX/MIXP.SIZE
TTX/MIX
AUTOfrequency
AUTO
MUTE
MUTE
EXIT range
EXIT
P.SIZE
PIP
PIP
SUBPAGE
SUBPAGE
Result:
The
tuner
scans
the
until the first
P.STD
P.STD
S.STD
S.STD
channel or theON
channel ON
that you selected is received on
8
your screen.
MUTE
PRE-CH
PRE-CH
To assign a programme number to a channel, select the Program by
pressing
the
P▼ orSUBPAGE
P▲ button.
- or
+ button to
P.SIZE
P.SIZE
PIPPress the
PIP
SUBPAGE
TTX/MIX TTX/MIX
AUTO
find the correct number.
AUTO
SLEEP
DUAL
SLEEPI/II SIZE
LIST/FLOF
DUAL I/IILOCATE
LIST/FLOF
CANCEL
CANCEL
SIZE
LOCATE
-/--
ON
Result:
10
MUTE
-/--
EXIT
E
ON
Press the P▼ or P▲SIZE
button LOCATE
toSIZE
select LOCATE
the Store. Select the OK by
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
pressing the
- or
+ button. SLEEP DUAL
Channel
AUTO
BG
471MHz
C4
P1
OK
S.STD
TV/VIDEO TV/VIDEO
PC
Result:
9
Colour system
Sound system
Search
Channel
Program
Store
+ button.
S.STD
Press the P▼ or P▲ button to select the Manual store. Press the
- or
+ button.
AUTO
BG
471MHz
C4
P1
?
AUTO
BG
471MHz
C4
P1
?
STILL
4
Channel
Colour system
Sound system
Search
Channel
Program
Store
DISPLAY
STILL
Press
P.STD the P.STD- or
-/-Channel
DISPLAY
PC
The options available in the Channel group are displayed.
3
Channel
AUTO
BG
471MHz
C4
P1
?
S.STD
Press the P▼ or P▲ button to select the Channel.
Result:
Colour system
Sound system
Search
Channel
Program
Store
S.STD
STILL
DISPLAY
STILL
Result:
The main menu
is displayed.
PowerP.STDPower
P.STD
S.STD
S.STD
Channel
Colour system
Sound system
Search
Channel
Program
Store
P.STD
DISPLAY
PC
Press the MENU button.
MUTE
MUTE
EXIT
The
programme
PRE-CH
PRE-CH number are
-/-- channel
-/-- and associated
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
stored.
-/-Repeat Steps
7 to TTX/MIX
9 for each channel AUTO
to be stored.
TTX/MIX
AUTO
MUTE
MUTE
EXIT
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
P.SIZE
EXIT
TTX/MIX
CANCEL
ON
-/-SIZE
SIZE
LOCATE
TTX/MIX
EXIT
PIP
ON
PRE-CH
LOCATE
PRE
AUTO
AU
English-18
PIP
SUBPAGE SUBPAGE
SIZE
PIP SLEEP
ON
ON
-/--/-SIZE
LOCATE
LOCATEP.SIZE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
PRE-CH PRE-CH
SUBPAGE SUBPAGE
PIP
ON
TTX/MIX
TTX/MIX
AUTO
AUTO
SIZE
SIZE
LOCATE
CA
P
O
LO
Giving Channels Names
Power
Power
If channel name information is broadcast when you store the channels
either manually or automatically, the names are assigned Power
to the
channels
directly.
YouTV/VIDEO
can
names or assign new
TV/VIDEO
PC however
DISPLAY
PC change
DISPLAY
STILL these
STILL
Power
names as required.
TV/VIDEO
P.STD
PC
TV/VIDEO
1
P.STD
DISPLAY
S.STD
PC
DISPLAY
S.STD
Press the MENU button.
Result:
P.STD
P.STD
S.STD
The main menu
is displayed.
S.STD
Power
2
STILL
Channel
Auto store
Manual store
Name
STILLAdd/Erase
Fine tune
Channel sort
Power
Press the P▼ or P▲ button to select the Channel.
Channel
Result:TV/VIDEO
TheTV/VIDEO
options
available
inDISPLAY
the Channel
PC
DISPLAY
PC
STILL
STILL group are displayed.
3
Press the
Power
- or
P.STD
4
+ button.
P.STD
S.STD
S.STD
Press theTV/VIDEO
P▼ or P▲
button DISPLAY
toPCselectDISPLAY
the
Name. STILL
Press the
TV/VIDEO
PC
STILL
+ button.
Result:
5
Power
7
Press the P▼ or P▲ button to select a letter (A~Z), a number(0~9)
or a symbol (-, space). Move on the previous or next letter by
pressing the
- or
+ button.
8
Repeat Steps 5 to 7 for each channel to be assigned to a new
PRE-CH PRE-CH
-/-name. -/--
- or
MUTE
+ button.
MUTE
EXIT
MUTE
MUTE
TTX/MIX TTX/MIX PRE-CH
EXIT
EXIT
EXIT
AUTO
AUTO
PRE-CH
-/--
TTX/MIX
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL
CANCEL
AUTOI/II LIST/FLOF
P.SIZE
P.SIZE
DUAL
I/II LIST/FLOF
-/--/--
P.SIZE
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
CANCEL
PIP
PIP
SUBPAGE SUBPAGE
CANCEL
PRE-CH PRE-CH
ON
ON
TTX/MIX
P.SIZE
AUTO
CANCEL
SIZE
SIZE
LOCATE
LOCATE
PIP
SUBPAGE
TTX/MIX TTX/MIX
AUTO
AUTO
ON
PRE-CH PRE-CH
-/--/-SIZE
LOCATE
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
TTX/MIX
Channel
EXIT
EXIT
Press the
P.SIZE
A----------------
S.STD EXIT
S.STD
EXIT
MUTE
SLEEP
P1
P2
P3
P4
The current channels are displayed.
P.STD MUTE
P.STD
MUTE
6
TTX/MIX
-----------------
- or
If necessary, select the channel to be assigned to a new name by
MUTE
pressing the P▼ or P▲ button.
-/--
P1
P2
P3
P4
AUTO
PIP
SUBPAGE SUBPAGE
P.SIZE
P.SIZE
LOCATE
LOCATE
PIP
SUBPAGE SUBPAGE
SIZE
SIZE
PIP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL ON
CANCEL
ON
SIZE
LOCATE
ON
AUTO
SLEEP
SIZE
PIP
PIP
ON
ON
SIZE
LOCATE
LOCATE
English-19
Skipping Unwanted Channels
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you have
Power Power
chosen to skip are not displayed.
Power
All channels
youTV/VIDEO
doPCnot specifically
chooseSTILL
to skip are displayed
TV/VIDEO
DISPLAY
PC
DISPLAY
STILL
Powerthat
during scanning.
TV/VIDEO
TV/VIDEO P.STD
PC
1
P1
P2
P3
P4
Added
Added
Added
Added
2
S.STD
STILL
Result:
DISPLAY
Power P.STD
S
PC
DISPLAY
TV/VIDEO
PC
DISPLAY
4
Channel
P1
P2
P3
P4
Erased
Added
Added
Added
The options available in the Channel group are displayed.
Press the
P.STD
- or
S.STD
+ S.STD
button.
Press the P▼ or P▲ button to select the Add/Erase. Press the
or
+ button.
Result:
-
The stored channels are displayed.
MUTE
MUTE
EXIT
EXIT
5
Press the P▼ or P▲ button to select the channel to add or erase.
MUTE
If necessary, select the Added or Erased by pressing the
- or
MUTE
EXIT
+ button.
6
Repeat Step 5 for each channel to be added or erased.
MUTE
MUTE
-/--
PRE-CH
PRE-CH
AUTO
AUTO
Fine Tuning Channel Reception
-/--
TTX/MIX
TTX/MIX
Power
1
TTX/MIX
P.SIZE
Power
P.STD
TV/VIDEO TV/VIDEO
PC
SLEEP
2
DISPLAY
PC
ON
DISPLAY
STILL
ON
S.STD
LOCATE
STILL
TTX/MIX P.SIZE
SLEEP
The main menu is displayed.
AUTO
SUBPAGE
DUAL I/II LIST/FLOF SIZE
CANCELLO
DUAL I/II LIST/FLOF
SIZE CANCEL
LOCATE
Press
select the
Channel.
P.STD the P▼
P.STDor P▲ button to
S.STD
S.STD
P.SIZE
ON
Press the
4
Press the P▼ or P▲ button to select the Fine tune.
5
Obtain a sharp and clear picture and good sound quality by pressing
the
- or
+ button.
MUTE
MUTE
EXIT
EXIT
- or
SIZE
MUTE
-/--
+ button.
LOCATE
EXIT
-/--
EXIT
PRE-CH
PRE-CH
PIP
ON
SIZE
3
MUTE
SUBPAGE
PIP
TheSUBPAGE
options available
in the Channel group are displayed.
P.SIZE
Result:
+ 1
ON
S.STD
SIZE
LOCATE
P.STD
SIZE
SUBPAGE AUTO
PIP
Press the MENU button.
Result:
English-20
A
DUAL
SLEEP
I/II do
LIST/FLOF
DUAL
I/II have
LIST/FLOF
CANCEL
CANCEL the channel,
If the reception
is clear,
you
not
to fine-tune
TTX/MIX SLEEP
AUTO
as this is done automatically during the search and store operation.
PRE-CH
-/-SLEEP
DUAL I/II LIST/FLOF CA
If however
signalTV/VIDEO
is PC
weakPRE-CH
or
distorted,
TV/VIDEO
DISPLAY
PC
DISPLAY
STILLyou may
STILL have to fine-tune
-/-- the
P.SIZE
P.SIZE
PIP
PIP
SUBPAGE
SUBPAGE
SLEEP manually.
DUAL I/II LIST/FLOF CANCEL
the channel
Power
Fine tune
PR
-/-PRE-CH
TTX/MIX
Power
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
EXIT
EXIT
-/--
Channel
STILL
STILL
P.STD
3
S
The main menu is
displayed.
S.STD
Press the P▼ or P▲ button to select the Channel.
TV/VIDEO
PC
S.STD
Press the MENU button.
Result:
Power
P.STD
Channel
P.STD
DISPLAY
LOCATE
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Channel
Power
◆ Modify
the Power
numeric order in which the channels have been
automatically stored.
Auto store
Manual store
Name
Add/Erase
Fine tune
Channel sort
◆ Give
easilyTV/VIDEO
remembered
the channels that you
TV/VIDEO
PC
DISPLAY
PC numbers
DISPLAY
STILL to STILL
Power
Power
watch most often.
P.STD TV/VIDEO
P.STD
TV/VIDEO
PC
1
2
S.STD
DISPLAY
STILL
S.STD
STILL
Result:Power
Power
P.STDThe main
P.STD menu is displayed.
S.STD
S.STD
Channel
From
To
Store
Press the P▼ or P▲ button to select the Channel.
TV/VIDEO TV/VIDEO
PC
Result:
Press the
P.STD
P.STD
TV/VIDEO
DISPLAY
PC
DISPLAY
STILL
STILL
Power
- or
+ S.STD
button. S.STD
TV/VIDEO
The options available in the Channel group are displayed.
Power
3
DISPLAY
PC
Press the MENU button.
PC
DISPLAY
STILL
PC
DISPLAY
Press the
Result:
TV/VIDEO
5
6
7
- or
STILL
Power
4 Power
Press the P▼ or P▲ button to select the Channel sort.
P.STD
P1 ----P-?
+ button.
P.STD
S.STD
S.STD
The options available in the Channel sort TV/VIDEO
group are PC
MUTE
MUTE
EXIT
EXIT
PC displayed
DISPLAY
withSTILL
the From is
selected.
DISPLAY
P.STD
Select the channel number that you wish to change by pressing the
S.STD
MUTE
EXIT
- orMUTE + button
repeatedly. EXIT
P.STD
STILL
Channel
From
To
S.STD
Store
P1
P3
?
From
EXIT To
Store
P3
P1
OK
---------
Press the P▼ or P▲ button to select the To. Select the new number
by which you wish to identify the channel by pressing the
- or
+ button repeatedly.
MUTE
MUTE
EXIT
EXIT
Press the P▼ or P▲ button to select the Store. Select the OK to
confirm the exchange of channel numbers by pressing the
- or
PRE-CH PRE-CH
-/--/-+ button.
MUTE
MUTE
Result:
Channel
EXIT
The selected channel
is exchanged with the one
---------
chosen
number.
-/--previously
-/-- stored to thePRE-CH
TTX/MIX
TTX/MIX
AUTO PRE-CH
AUTO
6
MUTE
For all the channels to move to the required channel numbers,
EXIT
repeat TTX/MIX
steps
7 after
select
From
pressing
the P▼ or P▲
SLEEP 5 to
DUAL
SLEEP
I/II LIST/FLOF
DUAL
I/II the
LIST/FLOF
CANCEL
TTX/MIX
AUTO byCANCEL
AUTO
button.
EXIT
MUTE
-/--
-/-P.SIZE
SLEEP
PRE-CH
SUBPAGE
SUBPAGE
P.SIZEI/II PRE-CH
PIP
DUAL
SLEEP
LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
PIP
CANCEL
ON
SIZE
SIZE
LOCATE
AUTO
AUTO
PIP
SUBPAGE
SUBPAGE
PRE-CH
ON
LOCATE
PIP
TTX/MIX
-/--
TTX/MIX
P.SIZE
SLEEP
TTX/MIX
-/-P.SIZE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
SIZE
AUTO
PRE-CH
P.SIZE
PIP
SUBPAGE SUBPAGE
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SIZE
CANCEL
ON
AUTO
SIZE
LOCATE
P.SIZE
SUBPAGE
PIP
SLEEP
DUAL I/II LIST/FLOF
TTX/MIX
P.SIZE
ON
LOCATE
TTX/MIX
-/--
PIP
SLEEP
ON
TTX/MIX
LOCATE
P.SIZE
LOCATE
SUBPAGE
PIP
ON
AUTO
PRE-CH
DUAL I/II LIST/FLOF
CANCEL
AUTO
SUBPAGE
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
CANCEL
ON
SIZE
SIZE
CANCEL
SIZE
LOCATE
PRE-CH
-/--
SIZE
PIP
CANCEL
ON
LOCATE
PIP
ON
SIZE
LOCATE
LOCATE
English-21
Changing the Picture Power
Standard
Power
TV/VIDEO TV/VIDEO
PC
Picture
Mode
Custom
Contrast
Brightness
Sharpness
Colour
Tint
Colour tone
Standard
Power
TV/VIDEO
PC
DISPLAY
P.STD
2
Press the P▼ or P▲ button to select the Picture.
The options available in the Picture group are displayed.
Result:
3
Press the
- or
+ button.
The Mode is selected.
Result:
4
Select the required picture effect by pressing the
- or
+
button repeatedly. The following picture effects are available:
MUTE - Movie - Custom.
EXIT
EXIT
DynamicMUTE
- Standard
EXIT
P.STD
S.STD
S.STD
EXIT
EXIT
PRE-CH
PRE-CH
AUTO
AUTO
You can also set these options simply by pressing the P.STD
(Picture Standard) button.
MUTE
MUTE
On the Picture menu, if you change the Contrast,
Brightness, Sharpness, Color or Tint (NTSC only)
settings, the Custom is selected automatically.
-/--
-/--
Power
Power
PRE-CH
TTX/MIX
Adjusting the PictureTTX/MIX
Settings
PRE-CH
AUTO
DUAL I/II LIST/FLOF
P.STD
STILL
STILL
➣
SLEEP
Power
Press the MENU button.
The main menu is displayed.
Result:
➣
TTX/MIX
STILL
Power
1
P
-/--
DISPLAY
STILL
You can select the type of picture which best corresponds to your
viewing requirements.
P.STD
P.STD
S.STD
S.STD
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
S.STD
MUTE
DISPLAY
PC
CANCEL
Picture
P.SIZE
PIP
SUBPAGE
Mode
Custom
ON
Contrast
Brightness
SIZE
LOCATE
Sharpness
Colour
Tint
Colour tone
Standard
Contrast
Power
Picture
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
SLEEP
Power
AUTO-/-STILL
CANCEL
TTX/MIX
-/--
TTX/MIX
Your set has several
you to S.STD
control picture quality.
P.STD settings
P.STD which allowS.STD
1
P.SIZE
P.SIZE
PIP
SUBPAGE
SUBPAGE
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
STILL
Power
Power
ON
Press the MENU button.
PIP
SLEEP
ON
main
menu
is displayed.
Result:TV/VIDEO
SIZE
SIZE
LOCATE
LOCATE
P.STD
P.STD TheTV/VIDEO
S.STD
S.STD
P.SIZE
Power
PC
DISPLAY
PC
DISPLAY
STILL Power
STILL
2
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
PIP
SUBPAGE SUBPAGE
PIP
ON
Press the
4
Select the option (Contrast, Brightness, Sharpness, Colour or
Tint) to be adjusted by pressing the P▼ or P▲ button. Press the
- or
+ button.
bar is displayed.
Result: MUTEThe horizontal
MUTE
EXIT
EXIT
5
Press the
6
CANCEL
ON
Press the P▼ or P▲ button to select the Picture.
in S.STD
the Picture
Result: P.STDThe options
SIZE
P.STD availableTV/VIDEO
S.STDgroup
TV/VIDEO
PC
DISPLAY
PC are displayed.
DISPLAY
STILL SIZE STILLLOCATE
3
50
Mode
Custom
Contrast
Brightness
Sharpness
Colour
Tint
Colour tone
Standard
AUTO
PRE-CH
- or
+ button.
P.STD
- or
P.STD
S.STD
S.STD
+ button to reach the required setting.
Press MUTE
the P▼ or P▲ button
MUTE
EXITto select
EXITthe Colour tone. Select the
required option by pressing the the
- or
+ button repeatedly.
The following options are available:
Cool2 -MUTE
Cool 1MUTE
- Normal - Warm EXIT
1 - Warm2.
EXIT
➣
English-22
-/--
MUTE
If you make any changes toMUTE
these settings,
the pictureEXIT
standard
switched
Custom.
PRE-CH to
PRE-CH
-/-- is automatically
-/--
TTX/MIX
-/--
TTX/MIX
PRE-CH
AUTO
PRE-CH
TTX/MIX
SLEEP
-/-TTX/MIX
SLEEP
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
-/-DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
EXIT
AUTO
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
PRE-CH PRE-CH
-/-AUTO
AUTO
PIP
-/--
PRE-CH
PRE-CH
LOCATE
Power
TV/VIDEO
PC
DISPLAY
P.STD
STILL
S.STD
Selecting
Picture Format
Powerthe
Power
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
STILL
Power
MUTE
Power
You can select the picture format which best corresponds to your
viewing requirements.
P.STD
P.STD
S.STD
S.STD
TV/VIDEO TV/VIDEO
PC
1
2
EXIT
Function
DISPLAY
PC
DISPLAY
STILL
Sleep timer
Size
Language
Press the MENU button.
The main menu is displayed.
Result:
P.STD
P.STD
S.STD
Off
STILL
PIP
Normal
English
S.STD
PRE-CH
-/--
Press the P▼ or P▲ button to select the Function.
The options available in the Function group are displayed.
Result:
TTX/MIX
3
Press the
SLEEP
DUAL I/II LIST/FLOF
4
Press the P▼ or P▲ button to select the Size.
P.SIZE
SUBPAGE
PIP
5
Select the required picture format by pressing the
button repeatedly.
SIZE
LOCATE
➣
- or
MUTE
+ button.
MUTE
EXIT
- or
CANCEL
ON
+
EXIT
You can also select these options simply by pressing the
P.SIZE (Picture Size) button.
MUTE
Normal
-/--
Normal
AUTO
TTX/MIX
MUTE
EXIT
Wide
PRE-CH
-/--
TTX/MIX
Zoom
PRE-CH
AUTO Wide
AUTO
-/--
PRE-CH
-/--
SLEEPto 4:3
DUAL
SLEEP
I/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
CANCEL
Sets the picture
normal
Sets the
picture
to 16:9 wide
TTX/MIX TTX/MIX
mode. This is a standard TV
mode.
screen size.
P.SIZE
EXIT
P.SIZE
PIP
SUBPAGE SUBPAGE
ON
SIZE
SIZE
LOCATE
PIP
SLEEP
ON
LOCATE
P.SIZE
Magnifies
the size of the
AUTO
picture on screen.
AUTO
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
Zoom
PRE-CH
PIP
SUBPAGE SUBPAGE
SIZE
CANCEL
PIP
ON
ON
SIZE
LOCATE
LOCATE
Freezing the Current Picture
➣ Not Available in PC mode.
Press the “STILL” button on the remote control to freeze the picture
on a given frame. To return to normal viewing, press the “STILL”
button again.
Power
TV/VIDEO
PC
DISPLAY
P.STD
STILL
S.STD
English-23
MUTE
EXIT
Changing the Sound Standard
Power
You can select
the type
of special
effect to
be used when
TV/VIDEO
TV/VIDEO
PC
DISPLAY
PC sound
DISPLAY
STILL
STILL
Power Power
watching a given broadcast.
Sound
Mode
Bass
Treble
Dolby
Custom
P.STD
:
Off
1
2
PC
DISPLAY
P.STD
STILL
3
4
Press the
P.STD
DISPLAY
STILL
STILL
S.STD
S.STD
- or
EXIT
EXIT
PRE-CH
PRE-CH
AUTO
AUTO
+ button.
The Mode is selected.
Select the required sound effect by pressing the
- or
+
button repeatedly. The following sound effects are available:
MUTE
EXIT
EXIT
Custom - Standard - Music - Movie - Speech.
➣
MUTE
You can also set these options simply by pressing the S.STD
(Sound Standard) button.
MUTE
MUTE
EXIT
-/--
PRE-CH
-/--
PRE-CH
Adjusting the Sound Settings
Power Power
PRE-CH
-/--
TTX/MIX
TTX/MIX
SLEEP
P.STD
DISPLAY
PC
The options available in the Sound group are displayed.
MUTE
P
S.STD
TV/VIDEO TV/VIDEO
PC
Press the P▼ or P▲ button to select the Sound.
Result:
S.STD
S.STD
The main menu is displayed.
Result:
Power
P.STD
Press the MENU button.
Result:
TV/VIDEO
Power
TTX/MIX
AUTO
AUTO
DUAL I/II LIST/FLOF
CANCEL
Sound
P.SIZE
Mode
Bass
Treble
Dolby
TV/VIDEO TV/VIDEO
PC
P.STD
P.SIZE
Power
ON
:
STILL
TTX/MIX
LOCATE
-/--
SLEEP canDUAL
SLEEP
LIST/FLOF
DUAL I/IItoLIST/FLOF
CANCEL
The sound settings
be I/IIadjusted
suit
yourCANCEL
personal preferences.
PIP
SUBPAGE
Custom
SIZE
DISPLAY
PC
DISPLAY
STILL
Power
Power
AUTO
-/--
1
Off
P.STD
S.STD
TV/VIDEO TV/VIDEO
PC
P.SIZE
PIP
Power SUBPAGE SUBPAGE
Press the MENU button.
Result:
TV/VIDEO TV/VIDEO
PC
2
ON
The main menuP.STD
is displayed.
P.STD
SIZE
DISPLAY
PC
SIZE
LOCATE
DISPLAY
STILL
TTX/MIX
S.STD
DISPLAY
PC
DISPLAY
STILL
STILL
PIP
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
S.STD
S.STD
LOCATE
STILL
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
Press the P▼ or P▲ button to select the Sound.
CANCEL
PIP
ON
ON
SIZE
LOCATE
LOCATE
Result: P.STDThe options
the Sound
group are displayed.
P.STD available in S.STD
S.STD
SIZE
Bass
3
Press the
4
Select the option (Bass or Treble) to be adjusted by pressing the
P▼ or P▲ button. Press the
- or
+ button.
- or
+ button.
51
Result:
5
The horizontal bar is displayed.
MUTE
Press the
MUTE
- or
EXIT
MUTE
➣
EXIT
+ button to reach the required setting.
MUTE
EXIT
EXIT
If you make any changes to these settings, the sound
standard is automatically switched to Custom.
MUTE
MUTE
-/--
-/--
EXIT
EXIT
PRE-CH
PRE-CH
-/-AUTO
AUTO
English-24
-/--
TTX/MIX
TTX/MIX
SLEEP
-/--
DUAL
SLEEPI/II LIST/FLOF
DUAL
I/II LIST/FLOF
CANCEL CANCEL
TTX/MIX
TTX/MIX
PRE-CH PRE-CH
-/--
PRE-CH
PRE-CH
AUTO
AUTO
Enjoying the Dolby Sound
Power
Power
This feature provides
a home
theater-like
DolbySTILL
effect by mixing the
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
left and right speakers.
Power
1
Power
P.STD
P.STD
S.STD
S.STD
Press the MENU button.
TV/VIDEO TV/VIDEO
PC
Result:
2
DISPLAY
PC
DISPLAY
STILL
Custom
:
On
STILL
The main menu is displayed.
Press the
to select
the Sound.
P.STD
P.STDP▼ or P▲ button
S.STD
S.STD
Result:
Power
The options available in the Sound group are displayed.
3
Press the
4
Press the P▼ or P▲ button to select the Dolby.
5
For enjoying the Dolby sound effect, select the On by pressing the
- orMUTE + button.
MUTE
EXIT
EXIT
MUTE
Sound
Mode
Bass
Treble
Dolby
- or
MUTE
+ button.
EXIT
TV/VIDEO
PC
DISPLAY
STILL
P.STD
S.STD
MUTE
EXIT
EXIT
Selecting the Sound Mode
-/--
-/--
PRE-CH
PRE-CH
AUTO
AUTO
You can set the sound mode by pressing the “DUALI/II” button.
When you press it, current sound mode is displayed on the screen.
TTX/MIX
Audio type
DUAL 1/2
PRE-CH PRE-CH
-/-SLEEP
SLEEPI/II LIST/FLOF
DUAL I/II MONO
LIST/FLOF
CANCEL
Mono DUAL
TTX/MIX
Stereo
P.SIZE
P.SIZE
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
SIZE
P.SIZE
NICAM
Stereo
Dual
ON DUAL ON
DUAL 1 ↔
2
Mono
MONO
P.SIZE
PIP
SUBPAGE SUBPAGE
Stereo
Automatic
change
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
PIP
DUAL 1
Automatic
change
ON
→
MONOLOCATE
→ DUAL 1
SIZE
LOCATE
CANCEL
ON
LOCATE
MONO ↔ STEREO
ON
Dual SIZE
CANCEL
SIZE
LOCATE
DUAL 2
➣
CANCEL
AUTO
STEREOAUTO
↔ MONO
SUBPAGE SUBPAGE
PIP
PIP
TTX/MIX
FM
Stereo
Default
→
-/--
TTX/MIX
PRE-CH
-/--
DUAL 1
◆ If the receiving conditions deteriorate, listening will be easier
if the mode is set to the MONO.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
English-25
Viewing the Picture In Picture (PIP)
Function
Sleep timer
PIP
Size
Language
Off
Normal
English
You can displayPower
a sub picture
Power within the main picture of TV program or
external A/V devices such as VCR or DVD. In this way you can watch
TV program or monitor the video input from any connected
devices
Power
Power
while watching
TV orTV/VIDEO
other
TV/VIDEO
PC video
DISPLAY
PCinput.
DISPLAY
STILL
STILL
TV/VIDEO TV/VIDEO
PC
1
P.STD
Press the
MENUP.STD
button.
Result:
Function
PIP
:
TV/Video
Size
Locate
2
On
TV
Small
S.STD
Power
P.STD
Press the
4
Press the P▼ or P▲ button to select the PIP. Press the
+ button.
PIP
:
TV/Video
Size
Locate
On
TV
Small
PC
DISPLAY
P.STD
STILL
TV/Video
Size
Locate
MUTE
On
TV
Small
7
Function
PIP
:
TV/Video
Size
Locate
On
TV
Small
8
Power P.STD
Power P.STD
S.STD
S.STD
The options available in the PIP group are displayed.
MUTE
MUTE
EXIT
EXIT
STILL
MUTE
EXIT
The sources are displayed Power
in the following
Power order:
TV - VIDEO1 - VIDEO2 - S-VIDEO.
-/--
PRE-CH
-/--
PRE-CH
STILL
AUTOP.STDorder:
Result:TTX/MIX
TheTTX/MIX
sizes are displayedAUTO
in the
P.STDfollowing
Small - Medium - Large.
S.STD
S.STD
PRE-CH
TTX/MIX TTX/MIX
AUTO
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
PRE-CH
PRE-CH
-/--these
◆ You can also MUTE
select
options simply by
pressing
the
MUTE-/-EXIT
EXIT
SIZE button.
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
P.SIZE
PIP
PIP
SUBPAGE
SUBPAGE
◆ Not Available
in PC mode.
TTX/MIX TTX/MIX
AUTO
AUTO
ON
ON
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
Press the P▼ or P▲ button to select the Locate. Move
the sub
SIZE
LOCATE
LOCATE
picture counterclockwise bySIZE
pressing
the
or
+
button.
ON
PRE-CH PRE-CH
-/--/-SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
You can also move the sub picture simply by pressing the
SIZE
SIZE
LOCATE
➣
PRE-CH
-/--
STILL
- or
TV/VIDEO
PC a DISPLAY
PCEXIT
DISPLAY
STILL
Press the P▼ or P▲ button to select
Size.TV/VIDEO
Select
size
of the
MUTE the
MUTE
EXIT
sub picture by pressing the
- or
+ button.
-/--/--
➣
EXIT
DISPLAY
STILL
You can also activate the PIP simply by pressing the PIP ON
button.
P.STD
P.STD
S.STD
S.STD
Result:
Function
:
S.STD
Press the P▼ or P▲ button to select the TV/Video. Select a source
MUTE
EXIT
of the sub picture by pressing
the MUTE
- or
+ button.EXIT
S.STD
PIP
DISPLAY
PC
Select the On by pressing
the TV/VIDEO
- PC
or
+ PC
button.DISPLAY
TV/VIDEO
DISPLAY
STILL
MUTE
➣
6
Power
TV/VIDEO
5
S
+ button.
TV/VIDEO TV/VIDEO
PC
Function
S.STD
STILL
The options available in the Function group are
displayed.
P.STDPower
P.STDPower
S.STD
3
Result:
S
P.STD
TV/VIDEO
TV/VIDEO
PC Function.
DISPLAY
PC
DISPLAY
STILL
Press the P▼ or P▲ button
to select
the
- or
DISPLAY
STILL
Power
The main menu is displayed.
Result:
DISPLAY
PC
S.STD
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
.SIZE
SUBPAGE
SUBP
AGE
PIP
SIZE
LOCATE
LOCA
TE
ON
A
SLEEP
LOCATE button.
TTX/MIXP.SIZE
TTX/MIX
P.SIZE
PIP AUTO PIP AUTO
SUBPAGE SUBPAGE
TTX/MIX
PR
ON
ON
MUTE
MUTE
EXIT
PRE-CH
PRE-CH
-/-- SLEEP-/-- DUAL
SLEEPI/IISIZE
LIST/FLOF
DUAL I/IILOCATE
LIST/FLOF
CANCEL
CANCEL
SIZE
LOCATE
TTX/MIX P.SIZE
TTX/MIX P.SIZE
PIPAUTO
SUBPAGE
AUTOSUBPAGE
ON
PIP
ON
SLEEP
SIZE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II SIZE
LIST/FLOF
CANCELLOCATE
CANCELLOCATE
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
-/-- ON
-/-SIZE
SIZE
LOCATE
EXIT
PIP
ONPRE-CH
PRE-CH
LOCATE
English-26
TTX/MIX
TTX/MIX
AUTO
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
P.SIZE
PIP
SUBPAGE SUBPAGE
AUTO
CANCEL
PIP
CA
LO
Power
TV/VIDEO
PC
DISPLAY
P.STD
STILL
S.STD
Switching Off Automatically
Power
Power
You can select a time period of between 10 and 240 minutes after
your set automatically
switches
off. DISPLAY
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
STILL
STILL
Power
1
Power
P.STD
Press the
MENUP.STD
button.
S.STD
S.STD
TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
Result: TV/VIDEO
The main
menu is
displayed.
2
Result:
3
4
S.STD
S.STD
The options available in the Function group are
displayed.
Press the
Result:
P.STD
- or
EXIT
+ button.
The Sleep timer is selected.
MUTE
Normal
English
PRE-CH
-/--
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
PIP
SIZE
LOCATE
CANCEL
DISPLAY
STILL
ON
Select the number of minutes after which your set switches off by
pressing the
- or
+ button repeatedly.
MUTE
Off
STILL
Press the P▼ or P▲ button to select the Function.
P.STD
Function
MUTE
Sleep timer
PIP
Size
Language
EXIT
EXIT
◆ The preset time intervals: 10, 20, 30, 60, 90, 120, 150, 180, 210,
and 240 minutes.
➣
MUTE
MUTE
EXIT
EXIT
You can also select simply by pressing the “SLEEP” button.
If the sleep timer is already set, the screen displays the
remaining time and then your set will be switched off.
If the sleep timer is not yet set, displays Off.
-/--
TTX/MIX
-/-SLEEP
-/--
TTX/MIX
PRE-CH
PRE-CH
AUTO
AUTO
PRE-CH
-/--
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
PRE-CH
CANCEL
Displaying
TTX/MIXInformation
TTX/MIX
AUTO
P.SIZE
SLEEP
P.SIZE
PIP
SUBPAGE SUBPAGE
AUTO
PIP
ON
ON
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
SIZE
SIZE
LOCATE
LOCATE
You can view the setting status of selected source by pressing the
“DISPLAY” button
on theP.SIZE
remote
control.
The
information
SUBPAGE
SUBPAGE
P.SIZE
PIP displayed
PIP
are different depending on the selected source.
ON
ON
SIZE
SIZE
LOCATE
LOCATE
Power
TV/VIDEO
PC
P.STD
S.STD
MUTE
EXIT
English-27
PRE-CH
-/--
TTX/MIX
AUTO
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
CANCEL
PIP
Setting up Your PC Software (Based on Widows 98)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screens look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1
First, click on “Settings” on the Windows start
menu.
While “Settings” is highlighted, move the cursor so
that “Control Panel” is highlighted.
2
When the control panel screen appears,
click on “Display” and a display dialogbox will appear.
3
Navigate to the “Settings” tab on the display dialog-box.
The correct setting of size (resolution)
- 15” : 1024 x 768 pixels
- 17” : 1280 x 1024 pixels
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
English-28
Power
Power
Adjusting the Brightness and Contrast
➣
1
TV/VIDEO
TV/VIDEO
PC pressing
DISPLAY
PCthe PCDISPLAY
STILL
Preset to the
PC mode
by
button.
Power
Power
P.STD
P.STD
TV/VIDEO TV/VIDEO
PC
Press the MENU button.
Result:
2
DISPLAY
PC
S.STD
DISPLAY
STILL
The main menu is displayed.
Power
P.STD
Power
P.STD
S.STD
STILL
S.STD
STILL
S.STD
Press the P▼ or P▲ button to select the PC.
PC
DISPLAY
PC
STILL
STILL are displayed.
Result:TV/VIDEO
TheTV/VIDEO
options
available
inDISPLAY
the PC group
Power
3
4
5
Press the
- or
+ button.
P.STD
P.STD
S.STD
PC is DISPLAY
PC
DISPLAY
STILL
Result:TV/VIDEO
TheTV/VIDEO
Image
selected.
Press the
- or
1024x768
48.2kHz 59.8Hz
S.STD
STILL
+ button again.
P.STD
P.STD
S.STD
S.STD
Result: MUTEThe options
group are displayed.
MUTE available in the
EXITImageEXIT
PC
Image
Brightness
Contrast
Select the option (Brightness or Contrast) to be adjusted for the
color of your computer image by pressing the P▼ or P▲ button.
MUTE
MUTE
EXIT
EXIT
Press the
- or
+ button.
Result:
6
Power
PC
Image
Image lock
Position
Colour adjust
Recall
The horizontal bar is displayed.
Press the
- or
MUTE
MUTE
-/--
-/--
MUTE
+ button to reach the required setting.
EXIT
EXIT
PRE-CH
PRE-CH
MUTE
EXIT
EXIT
TTX/MIX
-/--
TTX/MIX
-/--
AUTO
PRE-CH
AUTO
PRE-CH
SLEEP
TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
TTX/MIX
AUTO
P.SIZE
-/-SLEEP
P.SIZE
PIP
PIP
SUBPAGE SUBPAGE
PRE-CH
PRE-CH
-/-DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
ON
ON
TTX/MIX
P.SIZE
-/--
TTX/MIX
P.SIZE
-/--
SLEEP
TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL
CANCEL
SIZEI/II LIST/FLOF
SIZE
LOCATE
TTX/MIX
AUTO
CANCEL
LOCATE
AUTO
P.SIZE
SLEEP
SUBPAGE SUBPAGE
P.SIZE
PIP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
PIP
CANCEL
ON
P.SIZE
P.SIZE
SIZE
SIZE
LOCATE
PIP
SUBPAGE SUBPAGE
LOCATE
PIP
Brightness
90
CANCEL
AUTO
SIZE
SIZE
LOCATE
LOCATE
AUTO
AUTO
PIP
PIP
SUBPAGE SUBPAGE
PRE-CH
PRE-CH
ON
ON
SIZE
ON
ON
SIZE
LOCATE
LOCATE
English-29
Adjusting the Image Quality
➣
Power
Power
Preset to the
PC mode
by pressing the PC button.
Power
PC
Image
Image lock
Position
Colour adjust
Recall
This feature
used toTV/VIDEO
fine
and get
the bestSTILL
image by removing
PC tune
DISPLAY
PC
DISPLAY
STILL
PowerisTV/VIDEO
noises that create unstable images with jitters and shimmers.
TV/VIDEO
TV/VIDEO P.STD
PC
1
Power
48.2kHz 59.8Hz
2
S.STD
PC
DISPLAY
S
S.STD
P.STD
S
The main menu is
displayed.
S.STD
Power
Press the P▼ or P▲ button to select the PC.
Result:
options
available
inSTILL
the PC group are displayed.
TV/VIDEO
TV/VIDEO
PC TheDISPLAY
PC
DISPLAY
STILL
PC
Power
3
Image lock
Coarse
Fine
STILL
Press the MENU button.
Result:
P.STD
1024x768
P.STD
DISPLAY
Press the
Power
- or
+ button.
P.STD
4
P.STD
S.STD
S.STD
TV/VIDEO
PC button
DISPLAY
PC
DISPLAY
STILL
STILLLock. Press the
Press the
P▼ orTV/VIDEO
P▲
to select
the Image
or
-
+ button.
Result: P.STDThe options
the Image
Lock group are
P.STD available in S.STD
S.STD
MUTE
MUTE
EXIT
EXIT
displayed.
5
Coarse
1344
MUTE
Select the option (Coarse or Fine) to be adjusted for the quality
of
MUTE
EXIT
your computer image by pressing the P▼ or P▲ button. Press the
- or
+ button.
Result:
6
The horizontal bar is displayed.
Press the
MUTE
➣
- or
MUTE
+ button to reach the required setting.
EXIT
EXIT
PRE-CH
-/--/-- change thePRE-CH
This feature
may
width of
the image.
If necessary, adjust the position to center.
-/--
MUTE
TTX/MIX
MUTE
TTX/MIX
PRE-CH
EXIT
AUTO
EXIT
AUTO
PR
-/--
TTX/MIX
TTX/MIX SLEEP
SLEEP
-/--
P.SIZE
PIP
DUAL I/II P.SIZE
LIST/FLOFSUBPAGE
CANCEL SUBPAGE
PRE-CH PRE-CH
-/-ON
P.SIZE
TTX/MIX TTX/MIX
-/-SLEEP
P.SIZE
DUAL
SLEEPI/II LIST/FLOF
DUAL
I/II LIST/FLOF
CANCEL
AUTO
PIP
SUBPAGE SIZE
AUTOON
-/--
P.SIZE
PIP
PIP
SUBPAGE SUBPAGE
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
ON
P.SIZE
SIZE
P.SIZE
SIZE
LOCATE
LOCATE
PIP
SUBPAGE SUBPAGE
SIZE
English-30
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
SUBPAGE
CA
PIP
ON
SIZE
LOCATE
LOCATE
AUTO
PRE-CH PRE-CH
SIZE
LOCATE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
TTX/MIX TTX/MIX
AUTO
A
CANCEL
AUTO
CANCEL
PIP
ON
ON
SIZE
LOCATE
LOCATE
SIZE
LO
Power
Power
Changing the Image Position
➣
TV/VIDEO
TV/VIDEO
PC pressing
DISPLAY
PCthe PCDISPLAY
STILL
Power
Preset
to the
PC mode
by
button.
Power
STILL
TV/VIDEO
TV/VIDEO P.STD
PC
1
STILL
PC
Power
Press the P▼ or P▲ button to select the PC.
P.STD
Press the
- or
P.STD
4
5
P.STD
S.STD
S.STD
1024x768
S.STD
S.STD
-
PC
Position
H-Position
V-Position
Select the
position
(H-Position or V-Position)
MUTE
MUTE
EXIT
EXIT to be adjusted by
pressing the P▼ or P▲ button. Press the
- or
+ button.
MUTE
The horizontal bar is displayed.
MUTE
48.2kHz 59.8Hz
+ button.
P.STD
Press the P▼ or P▲ button to select the Position. Press the
or
+ button.
Result:
6
STILL
Image
S.STD
Image lock
Position
Colour adjust
Recall
P.STD
Result:TV/VIDEO
TheTV/VIDEO
options
available
inDISPLAY
the PC group
are displayed.
PC
DISPLAY
PC
STILL
STILL
3
STILL
PC
The main menu is
displayed.
S.STD
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
Power
DISPLAY
S.STDPower
S.STDPower
Press the MENU button.
Result:
P.STD
2
P.STD
DISPLAY
EXIT
EXIT
Press the
- or
+ button to reach the required setting.
MUTE
MUTE
EXIT
EXIT
H-Position
50
MUTE
MUTE
-/--
-/--
EXIT
EXIT
PRE-CH
PRE-CH
AUTO
AUTO
PRE-CH
-/--/--
TTX/MIX
TTX/MIX
PRE-CH
TTX/MIX
TTX/MIX SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL
I/II LIST/FLOF
CANCEL-/--CANCEL-/-AUTO
SLEEP
SLEEP
P.SIZE
PIPTTX/MIX PIPTTX/MIX
DUAL I/II P.SIZE
LIST/FLOFSUBPAGE
CANCEL SUBPAGE
PRE-CH PRE-CH
-/--/-ON
ON
TTX/MIX
SLEEP
SIZE
LOCATE
P.SIZE
P.SIZE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL CANCEL
P.SIZE
P.SIZE
SUBPAGE SUBPAGE
PIP
SIZE
CANCEL
AUTO
SUBPAGE
CANCEL
SIZE
PIP
SUBPAGE SUBPAGE
SIZE
PRE-CH
DUAL I/II LIST/FLOF
AUTO
P.SIZE
SIZE SLEEPLOCATE
LOCATE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
AUTO
AUTO
PIP
SUBPAGE SIZE
TTX/MIX
ON
P.SIZE
AUTO
PRE-CH
PIP
ON
LOCATE
PIP
ON
ON
SIZE
LOCATE
LOCATE
PIP
ON
ON
SIZE
LOCATE
LOCATE
English-31
Power
Power
Adjusting the Color
➣
P.STD
TV/VIDEO TV/VIDEO
PC
PC
1
Image
Image lock
Position
Colour adjust
Recall
1024x768
2
PC
DISPLAY
STILL
S.STD
STILL
S.STD
Power
Power
PC
DISPLAY
PC
DISPLAY
STILL
Press the P▼ or P▲ button to select the PC.TV/VIDEO TV/VIDEO
Result:
P.STD
P.STD
Press the
4
Press the P▼ or P▲ button to select the Colour adjust. Press the
- or
+ button.
Custom
STILL
The options available in the PC group are displayed.
3
Power
- or
Power
TV/VIDEO TV/VIDEO
PC
S.STD
S.STD
EXIT
EXIT
PRE-CH
PRE-CH
AUTO
AUTO
+ button.
DISPLAY
PC
DISPLAY
STILL
STILL
S.STD
S.STD
Power available in the Colour adjust group are
Result: Power
The options
MUTE
MUTE
EXIT
EXIT
displayed
with the Mode is
selected.
P.STD
5
6
PC
Mode
Red
Green
Blue
P.STD
DISPLAY
PC
Press the MENU button.
STILL
Result:P.STD The main menu
is displayed.
P.STD
S.STD
S.STD
48.2kHz 59.8Hz
Mode
Red
Green
Blue
TV/VIDEO
TV/VIDEO
PC pressing
DISPLAY
PCthe PCDISPLAY
STILL
Power
Preset to Power
the
PC mode
by
button.
Custom
P.STD
TV/VIDEO
PC
PC
STILL
STILL
Select TV/VIDEO
the required
color DISPLAY
mode
byDISPLAY
pressing
the
- or
MUTE
MUTE
EXIT
EXIT
repeatedly. The following color modes are available:
Custom P.STD
- Colour
1 - Colour 2 -S.STD
ColourS.STD
3.
P.STD
+ button
If you wish adjust the color which best corresponds to your viewing
MUTE
requirements, select the option (Red, Green, or
Blue) MUTE
to be adjusted
by pressing the P▼ or P▲ button.
Press the
- or
+ button.
PRE-CH PRE-CH
-/-Result: -/--The horizontal
bar is displayed.
7
Press the
-/--
Red
50
-/-TTX/MIX
MUTE
- or
+ button to reach the required setting.
TTX/MIX PRE-CH
MUTE
PRE-CH
AUTO
EXIT
AUTO
EXIT
If you change the Red, Green, or Blue settings, the Mode is
➣
SLEEPto Custom
DUAL
SLEEPI/II automatically.
LIST/FLOF
DUAL
CANCEL CANCEL
TTX/MIXselected
TTX/MIX
AUTOI/II LIST/FLOF
AUTO
MUTE
SLEEP
P.SIZE
MUTE
EXIT
P.SIZE
P.SIZE
PIP
SUBPAGE CANCEL
SUBPAGE
DUAL
SLEEP
I/II LIST/FLOF
DUAL
I/II LIST/FLOF
CANCEL
ON
P.SIZE
-/--
SIZE
PIP
SUBPAGE SUBPAGE
SIZE
-/--
SIZE
LOCATE
PIP
ON
ON
SIZE
LOCATE
LOCATE
PRE-CH
EXIT
-/-ON
TTX/MIX
LOCATE
SLEEP
TTX/MIX
-/--
AUTO
PRE-CH
TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
PIP
SUBPAGE SUBPAGE
AUTO
PRE-CH
SIZE
SLEEP
TTX/MIX
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
TTX/MIX
AUTO
CANCEL
AUTO
P.SIZE
SLEEP
P.SIZE
PIP
SUBPAGE SUBPAGE
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCEL
ON
PIP
CANCEL
ON
P.SIZE
P.SIZE
SIZE
SIZE
LOCATE
PIP
SUBPAGE SUBPAGE
LOCATE
PIP
SIZE
English-32
CANCEL
PRE-CH
P.SIZE
TTX/MIX
-/--
-/--
PIP
ON
ON
SIZE
LOCATE
LOCATE
PIP
ON
ON
SIZE
LOCATE
LOCATE
Initializing
the Image Settings
Power Power
➣
Preset to the PC mode by pressing the PC button.
Power
Power
TV/VIDEO TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
STILL
You can replace all image settings with the factory default values.
TV/VIDEO
P.STD
PC
TV/VIDEO
1
STILL
S.STD
Press the MENU button.
Result:
P.STD
2
P.STD
DISPLAY
Power
5
Image lock
Position
S.STD
Colour adjust
Recall
PowerP.STD
TV/VIDEO
PC
DISPLAY
PC
DISPLAY
STILL
Press the P▼ or P▲ button to select the TV/VIDEO
PC.
STILL
1024x768
- or
P.STD
S.STD
S.STD
+ button.
PC
Press the P▼ or P▲ button to select the Recall. Press the
+ button.
Recall
Image recall
Colour recall
- or
The options available in the Recall group are displayed.
MUTE
MUTE
EXIT
EXIT
Select the option (Image recall or Color recall) to be replaced
by pressing the P▼ or P▲ button. Press the
- or MUTE
+ button.
MUTE
EXIT
EXIT
Result:
The screen becomes black and return to original view
about a few seconds later.
MUTE
-/--
-/--
PRE-CH
PRE-CH
AUTO
AUTO
MUTE
EXIT
EXIT
PRE-CH
-/--/--
TTX/MIX
TTX/MIX PRE-CH
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL
CANCEL
AUTOI/II LIST/FLOF
TTX/MIX
TTX/MIX
P.SIZE
P.SIZE
P.SIZE
DUAL
I/II LIST/FLOF
SUBPAGE
PIP
SUBPAGE SUBPAGE
CANCEL
ON
SIZE
PIP
ON
SIZE
AUTO
CANCEL
-/--
SLEEP
48.2kHz 59.8Hz
The options available in the PC group are displayed.
Press the
Result:
STILL
Image
S.STD
P.STD
4
DISPLAY
The main menu
is displayed.
S.STD
Result:
3
PC
PC
-/--
SLEEP
PRE-CH PRE-CH
DUAL I/II LIST/FLOF CANCEL
PIP
ON
TTX/MIX TTX/MIXP.SIZE
SIZE
LOCATE
LOCATE
AUTO
AUTO PIP
SUBPAGE
ON
SLEEP
DUAL
SLEEPI/II LIST/FLOF
DUAL I/II LIST/FLOF
CANCELSIZECANCEL
LOCATE
P.SIZE
P.SIZE
LOCATE
PIP
SUBPAGE SUBPAGE
SIZE
PIP
ON
ON
SIZE
LOCATE
LOCATE
English-33
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
➣
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a coloured heading (FASTEXT system)
English-34
Power
Displaying the Teletext Information
TV/VIDEO
PC
DISPLAY
P.STD
STILL
S.STD
You can display Teletext information at any time on your set.
P
Teletext information to be displayed correctly, channel
☛ For
reception must be stable; otherwise:
MENU
P
◆ Information may be missing
MUTE
◆ Some pages may not be displayed
1
2
Select the channel providing the Teletext service using the P▼ or P▲
button.
Press the TTX/MIX button to activate the teletext mode.
EXIT
1
2
3
4
5
6
7
8
9
PRE-CH
-/--
Result:
The contents page is displayed. It can be redisplayed at
any time by pressing the
(index) button.
3
If you wish to display the actual broadcast at the same time as the
teletext page, press the TTX/MIX button again.
4
To return to normal viewing, press the CANCEL (
5
0
TTX/MIX
AUTO
AUT
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
.SIZE
SUBPAGE
SUBP
AGE
PIP
SIZE
LOCATE
ON
) button.
Press the EXIT button again to exit from the teletext display.
English-35
Selecting a Page by Number
Power
TV/VIDEO
PC
DISPLAY
P.STD
.STD
STILL
S.STD
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
P
Power
MENU
TV/VIDEO
PC
P
DISPLAY
P.STD
MUTE
1
2
3
4
5
6
7
8
2
The current page counter is incremented and the page is
then displayed.
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display on
a given page, press the
(hold) button. Press the
(hold) button
again to resume.
9
PRE-CH
-/-MUTE
Result:
STILL
S.STD
EXIT
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
0
Using the various display options:
EXIT
TTX/MIX
AUTO
AUT
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
.SIZE
SUBPAGE
SUBP
AGE
CANCEL
-/--
TTX/MIX
Press the...
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
PIP
ON
SIZE
To display...
LOCATE
LOCATE
PRE-CH
◆ A secondary page,
by entering its 4-digit number
SUBPAGE (
)
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
.SIZE
SUBPAGE
SUBP
AGE
PIP
SIZE
LOCATE
LOCA
TE
ON
English-36
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
MUTE
EXIT
Using FLOF to Select a Page
PRE-CH
-/--
The various topics included in the teletext pages are color-coded, and
can be selected by pressing the colored buttons on the remote control.
1
2
Display the teletext contents page by pressing the TTX/MIX button.
Press the coloured button corresponding to the topic that you wish to
select;the available topics are given on the status line.
Result:
The page is displayed with other coloured information that
can be selected in the same way.
TTX/MIX
AUTO
AUT
SLEEP
DUAL I/II LIST/FLOF
P.SIZE
.SIZE
SUBPAGE
SUBP
AGE
PIP
SIZE
LOCATE
LOCA
TE
DISPLAY
STILL
ON
Power
TV/VIDEO
PC
P.STD
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
CANCEL
S.STD
P
MENU
◆ Press the SUBPAGE ( ) button.
Result:
The available subpages appear.
P
◆ Select the required sub-page. Sub-pages can be scrolled by using
the
or
button.
MUTE
EXIT
Power
TV/VIDEO
PC
DISPLAY
P.STD
S.STD
-/--
PRE-CH
TTX/MIX
Storing Teletext Pages
STILL
AUTO
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
SUBPAGE
PIP
MUTE
SIZE
EXIT
LOCATE
ON
You can store up to four teletext pages to display them later at leisure.
1
Select the LIST mode using the LIST/FLOF (
Result:
➣
2
) button.
Four 3-digit numbers are displayed in different colors.
The LIST/FLOF ( ) button is used to switch between the
LIST and FLOF modes.
Press the colored button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a different
colored button each time.
5
Press the
1
2
3
4
5
6
7
8
9
PRE-CH
-/-0
TTX/MIX
AUTO
AUT
SLEEP
DUAL I/II LIST/FLOF
CANCEL
P.SIZE
.SIZE
SUBPAGE
SUBP
AGE
PIP
SIZE
LOCATE
LOCA
TE
ON
(store) button until the corresponding blocks blink.
English-37
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of your
set and contact your local dealer.
No sound or picture
◆
◆
◆
◆
Power to a wall socket.
Check that the mains lead has been connected
Check that you have pressed the Power ( ) button.
Check the picture contrast and brightness
settings.PC
TV/VIDEO
DISPLAY
Check the volume.
STILL
Normal picture but no sound
◆ Check the volume.
P.STD
S.STD
◆ Check whether the MUTE button has been pressed on the remote
control.
No picture or black and white picture
◆ Adjust the color settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the set and
move it further away.
◆ Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission
window).
◆ Check the battery terminals.
“Check Signal Cable” message is
displayed.
◆ Check that the signal cable is firmly connected to the PC or video
sources.
◆ Check that the PC or video sources are turned on.
On PC mode, “Not Supported Mode”
message is displayed.
◆ Check the maximum resolution and the frequency
of the video PRE-CH
-/-Adapter.
◆ Compare these values with the data in the Display Modes Timing
Chart.
TTX/MIX
AUTO
On PC mode, horizontal or vertical bars
appear to flicker, jitter or shimmer on the
image.
◆ Adjust the Coarse or Fine function.
On PC mode, screen is black and power
indicator light is steady amber or blinks
every 0.5 or 1 seconds.
P.SIZE
SUBPAGE
◆ The TV is using its power management system.
◆ Move the computer’s mouse or press a key on the keyboard.
MUTE
SLEEP
EXIT
DUAL I/II LIST/FLOF
SIZE
CANCEL
PIP
ON
LOCATE
continued...
English-38
Troubleshooting: Before Contacting Service Personnel
On PC mode, image is not stable and
may appear to vibrate.
◆ Check that the display resolution and frequency from your
computer or video board is an available mode for your set.
On your computer check: Control Panel, Display, Settings.
◆ If the setting is not correct, use your computer utility programme
to change the display settings.
➣
Your set supports multiscan display functions within the
following frequency domain:
Horizontal frequency 15” : 30 ~ 69 kHz
17” : 30 ~ 81 kHz
Vertical frequency 56 ~ 75 Hz
Maximum refresh rate 15” : 1024 x 768 @ 75Hz
17” : 1280 x 1024 @ 75Hz
On PC mode, image is not centered
on the screen.
◆ Adjust the horizontal and vertical position.
You need the Monitor driver software.
◆ Download the driver from WWW pages:
http://www.samsungusa.com/monitor
http://www.samsung-monitor.com
Power Saver
This set has a built-in power management system called PowerSaver. This system saves energy by
switching your set into a low-power mode when it has not been used for a certain period of time.
The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a
VESA DPMS compliant video card installed in your computer. You use a software utility installed on
your computer to set up this feature.
Normal Operation
Power-Saving Function mode
(EPA/NUTEK)
Horizontal Sync
Active
Inactive
Vertical Sync
Active
Inactive
Power Indicator
Green
Green, Blinking (1 sec interval)
LW15E23CB : 48W (Max.)
LW17E24CB : 58W (Max.)
Less than 2W
State
Power Consumption
➣
This set automatically returns to normal operation when horizontal and vertical sync return.
This occurs when you move the computer’s mouse or press a key on the keyboard.
English-39
Technical and Environmental Specifications
Model
Panel
Size
Display Size
Type
Pixel Pitch
Viewing Angle
Frequency
Horizontal
Vertical
Display Color
Display Resolution
Optimum Mode
Maximum Mode
LW15E23CB
15” Diagonal
17” Diagonal
304.1(H) x 228.1(V) mm
338(H) x 270(V) mm
a-si TFT active matrix
0.297 (H) x 0.297 (V) mm
70/70/55/60 (L/R/U/D)
70/70/55/55 (L/R/U/D)
30 ~ 69 kHz
56 ~ 75 Hz
Power Consumption
Maximum
Power Saving
30 ~ 81 kHz
56 ~ 75 Hz (XGA) / 60 ~ 75 Hz (SXGA)
16,777,216 colors
1024 x 768 @ 60 Hz
1024 x 768 @ 75 Hz
Input Signal
Sync.
Video Signal
Power Supply
Input
Output
LW17E24CB
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
AC 90 ~ 264V, 1.0 ~ 0.5A (50Hz / 60Hz)
DC 14V/3A
DC 14V/3.5A
48 W
Audio Characteristics
Audio Input 1
Audio Input 2 (PC)
Headphone Output
Frequency
Response
English-40
58 W
<2W
Dimensions (W x D x H) / Weight
TV Body
474 x 51 x 317 mm / 3.27 kg
With Stand
474 x 204 x 397 mm / 3.97 kg
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
1280 x 1024 @ 60 Hz
1280 x 1024 @ 75 Hz
530 x 57 x 367 mm / 4.25 kg
530 x 204 x 447 mm / 4.95 kg
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%
- 13 °F to 113 °F (-25 °C to 45 °C)
5% to 95%
RCA Jack (L, R), 0.5Vrms (-9dB)
3.5Ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output (3.5Ø Stereo Jack, 32Ω)
RF: 80Hz ~ 15kHz (at- 3dB)
A/V: 80Hz ~ 20kHz (at- 3dB)
Display Modes
If the signal from the system equals to the standard signal mode, the screen is adjusted automatically.
If the signal from the system doesn’t equal to the standard signal mode, adjust the mode with referring
to the Video card user guide because the screen might not display or only the power LED might be on.
For the display modes listed below, the screen image has been optimized during manufacture.
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
VGA
720 x 400
640 x 480
640 x 480
31.469
31.469
37.500
70.087
59.940
75.000
28.322
25.175
31.500
-/+
-/-/-
SVGA
800 x 600
46.875
75.000
49.500
+/+
XGA
1024 x 768
1024 x 768
48.363
60.023
60.004
75.029
65.000
78.750
-/+/+
SXGA
1280 x 1024
(LW17E24CB) 1280 x 1024
63.981
79.976
60.020
75.025
108.000
135.000
+ / -, + / +/+
Maintenance of Your Television
To avoid risk of electric shock, do not disassemble the TV cabinet (except for gaining access to the cable
connectors as described on page 7). Users cannot service the TV. User maintenance is restricted to
cleaning as explained below:
Unplug the television from the power outlet before cleaning.
◆ When you clean the TFT-LCD and the panel outside, please apply the recommended small
amount of cleaner by using soft and dry cloth and polish it. Let your television screen not to be
forced but to be scrubbed out softly. If excessive force is applied, you can have a stain on it.
◆ Never use flammable cleaning material to clean your television or any other electrical
apparatus.
English-41
Wiring the Mains Power Supply Plug (UK Only)
◆ IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse
is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same
rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable.
If a replacement fuse cover is required, it must be of the same color as the pin face of the plug. Replacement
covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the
cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead
or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse
and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock
hazard from the bared flexible cord.
◆ IMPORTANT
The wires in the mains lead are colored in accordance with the following code:
BLUE - NEUTRAL
BROWN - LIVE
As these colors may not correspond to the colored markings identifying the terminals in your plug,
proceed as follows:
The wire colored BLUE must be connected to the terminal marked with the letter N or colored BLUE or
BLACK. The wire colored BROWN must be connected to the terminal marked with the letter L or colored
BROWN or RED.
WARNING:
English-42
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED
WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLORED GREEN OR GREEN
AND YELLOW.
Memo
English-43
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product
indicates that a faulty condition may be present.
ELECTRONICS
BN68-00266C-01
Download PDF