Samsung | PS63C7000YW | Samsung PS63C7000YW Quick Guide

¦¦ Connecting a AV device
HD connection
Using an HDMI Cable
DVD, Blu-ray player,
HD cable box, HD
STB (Set-Top-Box)
satellite receiver, cable
box, satellite receiver
(STB)
R
HDMI OUT
W
HD connection
Using an HDMI to DVI Cable
DVI OUT
DVD / Blu-ray player
AUDIO OUT
R
W
Component connection
Using a Component Cable
COMPONENT OUT
B
G
R
W
Y
W
R
R
B
G
R
AUDIO OUT
DVD, Blu-ray
player, cable
box, STB satellite
receiver, VCR
Y
EXT
Device
R
B
G
R
R
W
W
VIDEO OUT
AUDIO OUT
Device
Using an Audio/Video Cable
Y
W
R
R
B
G
Using a Scart Cable
Y
English -4
BN68-02810A-00Eng.indd 1
R
W
2010-03-26 오후 6:34:08
Plasma TV
QUICK SETUP GUIDE
¦¦ The Supplied Accessories
yy Remote Control & Batteries (AAA x 2)
yy Owner’s Instructions
yy Cleaning Cloth
(M4 X L12)
yy Blanking Bracket & Screw (X1)
yy Holder-Wire stand
yy Cable Tie
yy Holder-Wire (3EA)
yy SCART Adapter (1EA)
yy Component Adapter
yy AV Adapter
yy Ferrite Core (2EA)
yy Ferrite Core (2EA)
✎✎Ferrite Core: The ferrite cores are used to shield the
Distance between the ferrite core and one end
of the cord put into the TV set.
cables from interference. When connecting a cable,
open the ferrite core and clip it around the cable near
the plug as shown in the figure.
yy A : below 50 mm
yy B : below 20 mm
A
B
See separate guide for installing the stand.
5EA (M4 X L12)
s
s
s
s
s
yy Stand (1EA)
yy Guide Stand (1EA)
5EA (M4 X L10)
yy Screws (10EA)
BN68-02810A-00
English - 1
BN68-02810A-00Eng.indd 2
2010-03-26 오후 6:34:10
¦¦ Installing the Stand
Preset
Step 1
Step 2
Top View
s
s
s
s
2
s
s
s
s
Front
s
s
s
s
s
s
s
s
Rear
1
✎✎Preset: Place the Guide Stand and Cover NeckPOWER
onto theSOURCE
stand and fasten it using the screws. Applicable to models
ON/OFF
(Depending on the model)
Step 1.Attach your PDP TV to the stand.
✎✎ Two or more people should carry the TV.
✎✎ Make sure to distinguish between the front and back of the stand when assembling them.
✎✎ To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper
left of right sides of the TV.
Step 2.Fasten two screws at position 1 and then fasten three screw at position 2.
✎✎ Stand the product up and fasten the screws. If you fasten PRE-CH
the screws with the PDP TV placed down, it may lean to
one side.
TTX/MIX
MUTE
¦¦ Using the remote control buttons
CH LIST
MENU
CONTENT
ENTERE / DIRECTION Buttons
Move the cursor and select an
item. Select the currently selected
item. Confirm the setting.
RETURN Button
Return to the previous menu.
GUIDE
TOOLS
INFO
RETURN
EXIT
3
MENU Button
Display the main on-screen menu.
4
EXIT
Exit the on-screen menu.
1
2
A
B
C
D
MEDIA.P
INTERNET
@TV
3D
AD
P.SIZE
SUBT.
¦¦ Installing Batteries in the Remote Control
✎✎NOTE
xx Use the remote control within 23 feet from the TV.
xx Bright light may affect the performance of the remote control. Avoid
using nearby special fluorescent light or neon signs.
xx The colour and shape may vary depending on the model.
English - 2
BN68-02810A-00Eng.indd 3
2010-03-26 오후 6:34:12
¦¦ Plug & Play
When the TV is initially powered on, basic settings proceed automatically and subsequently.
If you want to reset this feature, press the MENU button to display menu.
You can set the Plug & Play by selecting ‘Setup → Plug & Play’.
VHF/UHF Antenna
Cable
IN
Cable
or
ANT OUT
On the screen, you can set as follows.
✎✎The each step may vary depending on the Antenna source.
Step 1
Step 2
Plug & Play
Plug & Play
Select the OSD Language.
:
Plug & Play
Select
Select the usage mode.
▲
Nederlands
Menu Language
Step 3
English
Store Demo
▼
U Move
Previous
Step 4
U Move
▼
U Move
E Enter
Step 5
Plug & Play
: Air
Channel Source
: Digital & Analogue
►
Plug & Play
Auto Store in progress.
Set the Clock Mode.
Channels : 7
15%
Digital
E Enter
Step 6
Plug & Play
Antenna Source
:
Estonia
Home Use
E Enter
Country.
United Kingdom
Country
: English
Eesti
2
Radio:0
TV:2
Analogue
Clock Mode
Auto
: Manual
►
Manual
Data/Other: 0
0
U Move
E Enter
Stop
Serch
Previous
▲
Turkey
Skip
U Move
E Enter
E Enter
Step 7
Step 8
Plug & Play
Plug & Play
1/2
How to get the best perfotmance from your new HDTV
Step 1. Connect the HD Box to the using HDMI or Component
cables.
Enjoy your TV.
OK
TV rear view ►
HDMI Cable
HDMI Cable
Previous
Skip
► Next
English - 3
BN68-02810A-00Eng.indd 4
2010-03-26 오후 6:34:13
Download PDF