Samsung | LW15M13C | Samsung LW15M13C Benutzerhandbuch

ENG-00-13.qxd
9/8/03 6:02 PM
Page 1
LCD TV
LW15M13C
LW17M11C
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
TELETEXT
ENG-00-13.qxd
9/8/03 6:02 PM
Page 2
Caution
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO PREVENT ELECTRICAL SHOCK,
DO NOT REMOVE REAR COVER, NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The main voltage is indicated on the rear of your set and the frequency is 50 or 60 Hz.
Information in this document is subject to change without notice.
© 2003 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material.
The Samsung logo is the registered trademarks of Samsung Electronics Co., Ltd.; Microsoft, Windows® and Windows® NT
are registered trademark of Microsoft Corporation; VESA, DPMS and DDC are registered trademarks of Video Electronics
Standard Association. All other product names mentioned herein may be the trademarks or registered trademarks of their
respective owners.
European Notice (Europe Only)
Products with the CE marking comply with the EMC Directive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage
Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies
conformity to the following European Norms:
EN55013:1990+A12:1994+A13:1996+A14:1999 - Radio Frequency Interference
EN55020:1994+A11:1996+A12/A13/A14:1999 - Electromagnetic Immunity
EN61000-3-2:1995+A1/A2:1998 - Power Line Harmonics
EN61000-3-3:1995 - Voltage Fluctuations
EN60065:1998 - Product Safety
English-2
ENG-00-13.qxd
9/8/03 6:02 PM
Page 3
Safety Instructions
These illustrations represent precautions concerning your set.
Do not expose your set to extreme
temperature or humidity conditions.
Do not expose your set to
direct sunlight.
Do not expose your set to any liquids.
If your set is broken,
do not try to repair it yourself.
Contact qualified service personnel.
During storm conditions (especially when
there is lightning) unplug your set from
the mains socket and aerial.
Do not plug too many appliances
into one socket.
(It may cause the socket to
overload, which can result in a fire.)
Do not install the product in a confined
space with poor ventilation,
such as on a bookshelf or in a closet.
(An increase in internal temperature can
be a fire hazard.)
Do not forcibly bend, pull or put
a heavy object on the power cord.
(It may cause an electric shock or a fire.)
Do not place the power cord near
a heating device. (The protective coating
of the cord may melt off, which can cause
an electric shock or a fire.)
If the remote control is not used for a long
period of time, remove the batteries and
store it in a cool, dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
English-3
ENG-00-13.qxd
9/8/03 6:02 PM
Page 4
Contents
FOREWORD
Caution ..........................................................................................................
Safety Instructions.........................................................................................
2
3
CONNECTING AND PREPARING YOUR TV
Viewing the Control Panel .............................................................................
Viewing the Connection Panel ......................................................................
- Connecting an Aerial or Cable Television Network....................................
- Connecting a Set-Top Box, VCR, or DVD .................................................
- Connecting External A/V Devices ..............................................................
- Kensington Slot..........................................................................................
Viewing Pictures From External Sources......................................................
Inserting the Batteries in the Remote Control ...............................................
Viewing the Remote Control (All Functions Except Teletext)........................
Viewing the Remote Control (Teletext Functions) .........................................
Switching On and Off ....................................................................................
Placing in Standby Mode ..............................................................................
Becoming Familiar with the Remote Control.................................................
Plug & Play....................................................................................................
Selecting TV Mode or an Input Source .........................................................
Editing an Input Source Name ......................................................................
Choosing Your Language ..............................................................................
SETTING
THE
CHANNELS
Storing Channels Automatically.....................................................................
Storing Channels Manually ...........................................................................
Editing the Channels .....................................................................................
Sorting the Stored Channels .........................................................................
Giving Channels Names................................................................................
Fine Tuning Channel Reception....................................................................
SETTING
THE
19
20
22
23
24
25
PICTURE
Changing the Picture Standard .....................................................................
Adjusting the Custom Picture........................................................................
Adjusting the Screen Background Colour .....................................................
Changing the Picture Size.............................................................................
Freezing the Current Picture .........................................................................
English-4
6
7
8
8
8
8
9
9
10
11
12
12
13
14
16
17
18
26
27
28
29
29
ENG-00-13.qxd
9/8/03 6:02 PM
Page 5
Contents
SETTING
THE
SOUND
Changing the Sound Standard......................................................................
Selecting the Sound Mode ............................................................................
SETTING
THE
TIME
Setting the Clock ...........................................................................................
Switching Off Automatically ...........................................................................
Switching the television On and Off Automatically........................................
USING
THE
THE
32
33
34
VARIOUS FUNCTIONS
Selecting the Blue Screen Mode...................................................................
Displaying Information...................................................................................
USING
30
31
35
35
TELETEXT FEATURE
Teletext Feature.............................................................................................
Displaying the Teletext Information ...............................................................
Selecting a Page by Number ........................................................................
Using FLOF to Select a Page .......................................................................
Storing Teletext Pages ..................................................................................
36
37
38
39
39
RECOMMENDATIONS FOR USE
Troubleshooting: Before Contacting Service Personnel ...............................
Technical and Environmental Specifications .................................................
Maintenance of Your Telelvision ....................................................................
Attaching a Wall or Arm mounting device .....................................................
Installing VESA compliant mounting devices ................................................
Kensington Slot ..........................................................................................................
Wiring the Mains Power Supply Plug (UK Only)...........................................
40
41
42
43
44
45
46
Symbols
Press
Information
Note
English-5
ENG-00-13.qxd
9/8/03 6:02 PM
Page 6
Viewing the Control Panel
TV/VIDEO
Displays a menu of all of the available input sources
(TV - AV1 - AV2 - S-VIDEO).
MENU
Opens the on-screen menu.
-
+
Moves the selector left or right on the OSD.
Increases or decreases the level of audio volume.
+
: Display a submenu containing selections
for the current menu option.
: Return to the previous menu.Close the
on-screen menu system on main menu.
Moves the selector up or down on the OSD.
Increases or decreases the channel number.
POWER
Turns ON/OFF your set.
SPEAKERS
REMOTE CONTROL SENSOR
POWER INDICATOR
Lights up when you turn the power off.
HEADPHONE JACK
English-6
ENG-00-13.qxd
9/8/03 6:02 PM
Page 7
Viewing the Connection Panel
Option
Whenever you connect an audio or video system to your set,
ensure that all elements are switched off.
Refer to the documentation supplied with your equipment for
detailed connection instructions and associated safety precautions.
English-7
ENG-00-13.qxd
9/8/03 6:02 PM
Page 8
Viewing the Connection Panel
Connecting an Aerial or Cable Television Network (depending on the model)
To view television channels correctly, a signal must be received by the set from one of the
following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting a Set-Top Box, VCR, or DVD
- Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the
Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Connecting External A/V Devices
- Connect RCA or S-VIDEO cables to an appropriate external A/V device such as a VCR, DVD, or Camcorder.
- Connect RCA audio cables to “AUDIO (L)” and “AUDIO (R)” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
Kensington Slot
- This television has been designed to apply a burglarproof lock.
Retractable Stand
Tilt the screen until you feel comfortable.
The maximum tilt angle is 13 degrees in the backward direction.
Please do not tilt the television beyond the specified range.
Using excessive force to tilt the television beyond the
specified range may cause permanent damage to the
mechanical part of the stand.
English-8
ENG-00-13.qxd
9/8/03 6:02 PM
Page 9
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1
Check that all the necessary connections have been made
(refer to pages 8 for further details).
2
Video button...
Press the Video button to choose Video mode.
The input sources are displayed in the following order:
AV1 - AV2 - S-Video.
TV button...
Press the TV button to choose TV mode.
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you:
Purchase your set
Find that the remote control is no longer operating correctly
1
Remove the cover on the rear of the remote control by pressing the
symbol downwards and then pulling firmly to remove it.
2
Install two AAA size batteries.
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
3
Replace the cover by aligning it with the base of the remote control
and pressing it back into place.
Do not mix battery types, i.e. alkaline and manganese.
English-9
ENG-00-13.qxd
9/8/03 6:02 PM
Page 10
Viewing the Remote Control (All Functions Except Teletext)
Television On/Off
Numeric buttons for
direct channel access
One/Two-digit channel selection
Previous channel
Volume up or down
Next channel
Previous channel
Temporary sound switch-off
Available source selection
Automatic switch-off
Use to see information
on the current broadcast
Menu display and
change confirmation
Exit the OSD
Control the cursor
in the menu
Sound mode selection
Picture size selection
Picture freeze
Picture effect selection
Sound effect selection
The performance of the remote control may be affected by bright light.
English-10
ENG-00-13.qxd
9/8/03 6:02 PM
Page 11
Viewing the Remote Control (Teletext Functions)
Teletext hold
P
P
:Teletext next page
:Teletext previous page
Teletext mode selection
(LIST/FLOF)
Teletext store
Teletext reveal
Teletext Index
Teletext display/
mix both teletext information
and the normal broadcast
Teletext sub-page
Teletext cancel
Teletext size selection
English-11
ENG-00-13.qxd
9/17/03 3:17 PM
Page 12
Switching On and Off
The mains lead is attached to the rear of your set.
If you purchased this set in the United Kingdom,
refer to page 46 for further instructions on plug wiring.
1
Plug the mains lead into an appropriate socket.
Result:
When the power cord is plugged in, the LED turns red.
2
Press the
POWER button to switch on.
3
To switch off, press the
POWER button again.
Placing in Standby Mode
Your set can be placed in Standby mode in order to reduce the
power consumption.
The Standby mode can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
1
Press the
POWER button.
2
To switch back on, simply press the
or a numeric button.
POWER button again
Do not leave your set in Standby mode for long periods of
time (when you are away on holiday, for example).
Turn off by pressing the POWER button.
It is best to unplug the set from the mains and aerial.
English-12
ENG-00-13.qxd
9/9/03 1:37 PM
Page 13
Becoming Familiar with the Remote Control
The remote control is used mainly to:
Change channels and adjust the volume
Set up your set using the on-screen menu system
The following table presents the most frequently used buttons and their
functions.
Button
PRE-CH
to
-/--
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the
previous stored channel.
-
Used to switch repeatedly between the last two channels
displayed. (PRE-CH; Previous Channel)
Used to display the corresponding channels.
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
Used to switch the sound off temporarily.
To turn the sound back on, press this button again,
or press the
+ or
- button.
MENU
Used to display the
on-screen menu system.
EXIT
Used to return to the previous
menu or normal viewing.
Used to exit the menu system and return directly to normal
viewing.
Display a submenu containing selections for the
current menu option.
Search backwards/forwards manually for channels
Increase/decrease a menu option value
English-13
ENG-14-29.qxd
9/8/03 6:06 PM
Page 14
Plug & Play
When the set is initially powered ON, you are automatically presented
with a series of basic customer settings.
The following settings are available.
1
If the set is in standby mode, press the
on the remote control.
Result:
2
POWER button
The message Plug & Play is displayed.
It appears for a little while, and then the Language
menu is automatically displayed.
Select the appropriate Language by pressing the
or
button.
The available languages are listed.
You can choose one of 18 Languages.
3
Press the ENTER
Result:
The message Ant. Input Check is displayed with
OK selected.
4
Press the ENTER
5
Select your Country by pressing the
Press the ENTER
button.
Result:
button.
or
button.
The country menu is displayed:
Belgie - Deutschland - Espania - France - Italia Nederland - Schweiz - Sverige - UK - East Europe Others
6
Select the Hour or Min by pressing the or
button.
Set the Hour or Min by pressing the or
button.
(Refer to “Setting the Clock” on page 32)
7
Press the MENU button to confirm your setting.
Result:
English-14
button to confirm your choice.
The message Enjoy your watching is displayed,
and then the channel which has been stored will be
activated.
ENG-14-29.qxd
9/8/03 6:06 PM
Page 15
Plug & Play
If you want to reset this feature...
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
4
Press the or
button to select the Plug & Play.
Press the ENTER
button.
Result:
5
button.
The message Plug & Play is displayed.
For further details on how to set up this feature, refer to the
14 and 23 page.
Sort menu is displayed after Menu’s Plug&Play ended.
English-15
ENG-14-29.qxd
9/8/03 6:06 PM
Page 16
Selecting TV Mode or an Input Source
You can choose TV mode or change to an input source connected to
the TV set. Use this button to choose an input source that you would
like to watch.
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select the Input.
The options available in the Input group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
5
The TV/Video is selected.
Press the or
button to move to the input source that
you wish to choose.
Press the ENTER
button.
Result:
English-16
The main menu is displayed.
The input source changes to the one you have chosen.
ENG-14-29.qxd
9/8/03 6:06 PM
Page 17
Editing an Input Source Name
Entering the names of the input source devices connected to the input
ports on the TV set allows you to find and choose an input source that
you would like to watch in a quick and convenient manner.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Input.
The options available in the Input group are displayed.
3
Press the ENTER
4
Press the or
button to select the Edit Name.
Press the ENTER
button.
5
Press the or
button to move to the input source that
you wish to edit.
Press the ENTER
button.
Result:
6
The following options are available:
AV 1 - AV 2 - S-Video
Select the required device by pressing the
Result:
7
button.
or
repeatedly.
The following options are available:
---- - VCR - DVD - Cable STB - HD STB - Satellite STB AV Receiver - DVD Receiver - Game - Camcorder - DVD
Combo - DHR - PC.
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
English-17
ENG-14-29.qxd
9/8/03 6:06 PM
Page 18
Choosing Your Language
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indicators.
1
Press the MENU button.
Result:
2
Press the
Result:
English-18
The main menu is displayed.
or
button to select the Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the or
button to select the Language.
Press the ENTER
button.
5
Select a particular Language by pressing the
repeatedly.
6
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
or
button
ENG-14-29.qxd
9/8/03 6:06 PM
Page 19
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers.
However you can sort numbers manually and clear any channels you
do not wish to watch.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select ATM.
Press the ENTER
button.
Result:
5
button.
The Start is selected.
Press the ENTER
button to search the channels.
The sub menu is changed from Start to Stop with channel
search started.
Result:
The search will end automatically.
Channels are sorted and stored in an order which reflects
their position in the frequency range, (with lowest first and
highest last). The programme originally selected is then
displayed.
To return to the previous menu, press or
Return and then press ENTER
button.
button to select
To stop the search before it has finished, press the ENTER
button to search the channels.
6
When the channels have been stored, you can:
Add or delete the channels (refer to page 22)
Sort them in the order required (refer to page 23)
Assign a name to the stored channels (refer to page 24)
Fine tune channel reception if necessary (refer to page 25)
English-19
ENG-14-29.qxd
9/8/03 6:06 PM
Page 20
Storing Channels Manually
You can store up to 100 channels, including those received via
cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found
The programme number of each stored channel which you wish to
identify
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select the Manual Store.
Press the ENTER
button.
Result:
5
6
The options available in the Manual Store group are
displayed with the Prog. No. selected.
or
button
The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NT4.43
Press the or
button to select Sound System.
Press the ENTER
button.
Select the Sound System required by pressing the
repeatedly and then press the ENTER
button.
Result:
7
button.
Press the or
button to select Colour System.
Press the ENTER
button.
Select the Colour System required by pressing the
repeatedly and then press the ENTER
button.
Result:
English-20
The main menu is displayed.
or
button
The sound standards are displayed in the following order:
BG - DK - I - L
For all the channels to move to the required channel numbers,
repeat steps 5 to 6 after selecting Prog. No. by pressing the
or
button.
ENG-14-29.qxd
9/9/03 1:15 PM
Page 21
Storing Channels Manually
8
If you know the channel number to be stored,
Press the or
button to select the Channel.
Press the ENTER
button.
Select C (Air channel) or S (Cable channel) by pressing the
or
button and then press the ENTER
button.
Select the required number by pressing the or
button
and then press the ENTER
button.
If there is normal sound or no sound, re-select the
sound system required.
9
If you do not know the channel numbers, press the
to select Search.
Press the ENTER
button.
Start the Search by pressing the or
button.
Press the ENTER
button.
Result:
10
button
The tuner scans the frequency range until the first channel
or the channel that you selected is received on your screen.
Press the or
button to select Store.
Press the ENTER
button.
Select OK by pressing the or
button.
Press the ENTER
button.
Result:
11
or
The channel and associated programme number are
stored.
Repeat Steps 8 to 10 for each channel to be stored.
English-21
ENG-14-29.qxd
9/8/03 6:06 PM
Page 22
Editing the Channels
You can exclude any channels of your choice from the channels you
have scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select Add/Delete.
Press the ENTER
button.
Result:
5
button.
The state of the current channel is displayed.
Press the
or
Add or Delete.
Result:
English-22
The main menu is displayed.
button to select the channel that you wish to
If the channel that you wish to edit is not in the memory,
Add is selected and displayed.
Otherwise, if the channel that you wish to edit is in the
memory, Delete is selected and displayed.
6
Press the ENTER
button to Add or Delete the channel.
7
To return to the previous menu, select Return by pressing the
or
button and then press the ENTER
button.
8
Repeat Step 5 for each channel to be added or erased.
ENG-14-29.qxd
9/8/03 6:06 PM
Page 23
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Assign easily remembered numbers to the channels that you watch
most often.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select Sort.
Press the ENTER
button.
Result:
5
The selected Channel number and Name are moved
to the right side.
Press the or
button to move to the position which you would
like to change and then press the ENTER
button.
Result:
7
The current Prog. No. Channel and Name are
displayed.
Select the channel number that you wish to change by pressing
the or
button repeatedly.
Press the ENTER
button.
Result:
6
button.
The selected channel is exchanged with the one
previously stored to the chosen number.
Repeat step 5 to 6 for another channel to sort again.
English-23
ENG-14-29.qxd
9/8/03 6:07 PM
Page 24
Giving Channels Names
If channel name information is broadcast when you store the channels
either manually or automatically, the names are assigned to the
channels directly. You can however change these names or assign
new names as required.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select the Name.
Press the ENTER
button.
Result:
5
The current Prog. No. Channel and Name are displayed.
If necessary, select the channel to be assigned to a new Name
by pressing the or
button.
Press the ENTER
button.
Result:
6
button.
The selection bar is displayed around the name box.
To...
Then...
Select a letter, number or symbol
Press the
or
Move on to the next letter
Press the
button
Move back to the previous letter
Press the
button
Confirm the name
Press the ENTER
The characters available are :
Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters ( __, space)
English-24
7
Repeat Steps 5 to 6 for each channel to be assigned to a
new name.
8
When you have finished entering the name,
press the ENTER
button to confirm the name.
button
button
ENG-14-29.qxd
9/8/03 6:07 PM
Page 25
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to fine-tune
the channel manually.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
button.
4
Press the or
button to select the Fine Tune.
Press the ENTER
button.
5
Press the
or
Fine Tune.
6
Press or
button until you reach the setting to obtain a sharp
and clear picture and good sound quality.
To store the setting, press the ENTER
button.
7
To reset the fine tuning, select Reset by pressing the or
button
and then press the ENTER
button.
To return to the previous menu, select Return by pressing the
or
button and press the ENTER
button.
button to select the channel that you wish to
English-25
ENG-14-29.qxd
9/18/03 4:10 PM
Page 26
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
5
The Picture Mode is selected .
Select the required picture effect by pressing the
repeatedly.
Press the ENTER
button.
Result:
or
The following picture effects are available:
Dynamic - Standard - Movie - Custom - Auto
You can also set these options simply by pressing the
P.MODE (Picture Mode) button.
English-26
button
ENG-14-29.qxd
9/18/03 4:10 PM
Page 27
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
4
Press the or
button to select the Custom Picture.
Press the ENTER
button.
5
Select the option (Contrast, Brightness, Sharpness, Colour
or Tint-NTSC only) to be adjusted by pressing the or
button.
Press the ENTER
button.
Result:
button.
The horizontal bar is displayed.
6
Press the
or
button to reach the required setting.
7
When you are satisfied with the setting, press the MENU button
to return to the previous menu or press the EXIT button to return to
normal viewing.
If you make any changes to these settings,
the picture standard is automatically switched to Custom.
English-27
ENG-14-29.qxd
9/18/03 4:10 PM
Page 28
Adjusting the Screen Background Colour
You can change the screen background colour according to your preference.
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
4
Press the or
button to select the Colour Tone.
Press the ENTER
button.
Result:
5
English-28
The main menu is displayed.
button.
The following options are available:
Cool - Normal - Warm
When you are satisfied with your choice, press the EXIT button
to return to normal viewing.
ENG-14-29.qxd
9/18/03 4:10 PM
Page 29
Changing the Picture Size
You can select the picture format which best corresponds to
your viewing requirements.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
4
Press the or
button to select the Size.
Press the ENTER
button.
5
Select the required picture format by pressing the
repeatedly.
Press the ENTER
button.
Result:
button.
or
button
The following options are available:
Normal - Zoom
You can also set these options simply by pressing the
P.SIZE (Picture SIZE) button.
Freezing the Current Picture
Press the “STILL” button on the remote control to freeze the picture
on a given frame.
To return to normal viewing, press the “STILL” button again.
English-29
ENG-30-43.qxd
9/8/03 6:07 PM
Page 30
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
5
The Sound Mode is selected .
Select the required sound effect by pressing the
repeatedly.
Press the ENTER
button.
Result:
or
The following sound effects are available:
Standard - Speech
You can also set these options simply by pressing the
S.MODE (Sound Mode) button.
English-30
button
ENG-30-43.qxd
9/8/03 6:07 PM
Page 31
Selecting the Sound Mode
You can set the sound mode by pressing the "DUAL I-II" button.
When you press it, current sound mode is displayed on the screen.
FM
Stereo
Audio Type
DUAL 1/2
Mono
MONO
Stereo
STEREO
MONO
Automatic
change
Dual
DUAL 1
DUAL 2
DUAL 1
Mono
Stereo
NICAM
Stereo
Default
Dual
MONO
MONO
STEREO
MONO
DUAL 1
DUAL 2
Automatic
change
DUAL 1
If the receiving conditions deteriorate, listening will
be easier if the mode is set to Mono.
If the stereo signal is weak and automatic switching occurs,
switch to Mono.
English-31
ENG-30-43.qxd
9/8/03 6:07 PM
Page 32
Setting the Clock
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
The Time is selected.
5
Press the ENTER
button.
Press the or
button to set the Hour.
6
Press the
Press the
7
Press the ENTER
Result:
or
or
button to move to Min.
button to set the minutes.
button.
The clock is set.
You can also set the time using the numeric buttons on the remote.
English-32
ENG-30-43.qxd
9/8/03 6:07 PM
Page 33
Switching Off Automatically
You can select a time period of between -- and 180 minutes after which
your set automatically switches off.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
4
Press the or
button to select the Sleep Timer.
Press the ENTER
button.
5
Select the number of minutes after which your set switches On
by pressing the or
button repeatedly.
Result:
button.
The preset time intervals:
- -, 30, 60, 90, 120, 150, 180 minutes.
You can also select this feature by simply pressing the "SLEEP"
button.
If the sleep timer is already set, the screen displays the remaining
time and then your set will be switched Off.
If the sleep timer is not yet set, Off is displayed.
Off • 30 • 60 • 90 • 120 • 150 • 180 • Off
English-33
ENG-30-43.qxd
9/8/03 6:07 PM
Page 34
Switching the Television On and Off Automatically
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice
at the time you select.
Switch off automatically at the time you select.
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the
Result:
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
5
The Time menu are displayed with Clock selected.
Press the or
button to select the On Timer.
Press the ENTER
button.
Result:
The On Timer menu is displayed.
To...
Press the...
Move to Hour, Min, Prog. and Volume
or
button
Set Hour, Min, Prog. and
Volume level
or
button
Move to Set
or
button
Select On to enable above setting
or
button
Press the ENTER
English-34
button.
6
Press the or
button to select Off Timer.
In the same way, set the time at which you wish the set to
be switched off automatically.
7
To display the...
Press the...
Channel information
TV button
Current time and selected audio/video
setting status
INFO button
ENG-30-43.qxd
9/8/03 6:07 PM
Page 35
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
"Blue Screen" mode to "Off".
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the or
button to select Blue Screen.
Press the ENTER
button.
5
Select the required option (On or Off) by pressing the
or
button.
6
Press the EXIT button to return to normal viewing.
Displaying Information
You can view the setting status of the selected source by pressing the
"INFO" button on the remote control.
The information displayed varies according to the selected source.
English-35
ENG-30-43.qxd
9/8/03 6:07 PM
Page 36
Teletext Feature
Most television channels provide written information services
via teletext.
Information provided includes:
Television programme times
News bulletins and weather forecasts
Sports results
Travel information
This information is divided into numbered pages (see diagram).
Part
A
Contents
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indicators.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
Teletext information is often divided between several pages displayed
in sequence, which can be accessed by:
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
English-36
ENG-30-43.qxd
9/8/03 6:07 PM
Page 37
Displaying the Teletext Information
You can display Teletext information at any time on your set.
☛
For Teletext information to be displayed correctly,
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
Select the channel providing the Teletext service using the
or
button.
2
Press the TTX/MIX button to activate the teletext mode.
Result:
The contents page is displayed. It can be redisplayed
at any time by pressing the
(index) button.
3
If you wish to display the actual broadcast at the same time as the
teletext page, press the TTX/MIX button again.
4
Press the TTX/MIX button again to exit the teletext display.
English-37
ENG-30-43.qxd
9/8/03 6:07 PM
Page 38
Selecting a Page by Number
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result:
2
The current page counter is incremented and the page
is then displayed.
If the selected page is linked with several secondary pages,
the secondary pages are displayed in sequence.
To freeze the display on a given page, press the
(hold) button.
Press the
(hold) button again to resume.
Using the various display options:
To display...
English-38
Press the...
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page,
by entering its 4-digit number
(subpage)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
ENG-30-43.qxd
9/8/03 6:07 PM
Page 39
Using FLOF to Select a Page
The various topics included in the teletext pages are colour-coded, and
can be selected by pressing the coloured buttons on the remote control.
1
Display the teletext contents page by pressing the TTX/MIX button.
2
Press the coloured button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result:
The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
◆ Press the
Result:
(subpage) button.
The available subpages appear.
◆ Select the required subpage.
Subpages can be scrolled by using the
or
button.
Storing Teletext Pages
You can store up to four teletext pages to display them later at leisure.
1
Select the LIST mode using the
Result:
(LIST/FLOF) button.
Four 3-digit numbers are displayed in different colours.
The
(LIST/FLOF) button is used to switch between
the LIST and FLOF modes.
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a different
coloured button each time.
5
Press the
(store) button until the corresponding blocks blink.
English-39
ENG-30-43.qxd
9/8/03 6:07 PM
Page 40
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of your
set and contact your local dealer.
No sound or picture
◆
◆
◆
◆
Normal picture but no sound
◆ Check the volume.
◆ Check whether the MUTE button has been pressed on the
remote control.
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the set
and move it further away.
◆ Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
English-40
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the POWER button.
Check the picture contrast and brightness settings.
Check the volume.
ENG-30-43.qxd
9/19/03 10:26 AM
Page 41
Technical and Environmental Specifications
Model
LW15M13C
LW17M11C
Panel
Size
Display Size
Type
Pixel Pitch
Viewing Angle
15” Diagonal
304.1 (H) x 228.1 (V) mm
TN
0.297(H) x 0.297(V) mm
140/115 (H/V)
17” Diagonal
344.64 (H) x 258.48 (V)mm
PVA
0.5385(H) x 0.5385(V) mm
170/170 (H/V)
Power Supply
Input
AC 100 ~ 250 V (50 / 60 Hz)
Power Consumption
Normal
Stand-By
40 W
<2W
62 W
<2W
Dimensions (W x D x H) / Weight
TV Body
With Stand
470 x 57.0 x 313.7 mm / 4.0kg
520 x 61.5 x 359 mm / 5.0kg
18.5 x 2.24 x 12.35 inch / 8.8lbs 20.47 x 2.42 x 14.13 inch / 11lbs
470 x 182.2 x 367.8 mm
18.5 x 7.17 x 14.48 inch
520 x 182.2 x 409.5 mm
20.47 x 7.18 x 16.12 inch
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50 °F to 104 °F
10% to 80%
- 13 °F to 113 °F
5% to 95%
English-41
ENG-30-43.qxd
9/8/03 6:07 PM
Page 42
Maintenance of Your Television
To avoid risk of electric shock, do not disassemble the TV cabinet.
Users must not service the TV.
User maintenance is restricted to cleaning, as explained below:
Unplug the television from the power outlet before cleaning.
◆ When you clean the TFT-LCD and the external panel, please apply the recommended small
amount of cleaner, using a soft, dry cloth to polish it.
Do not force your television screen, scrubbing it only softly.
The use of excessive force can result in stains on the screen.
◆ Never use flammable cleaning material to clean your television or any other electrical
apparatus.
English-42
ENG-30-43.qxd
9/8/03 6:07 PM
Page 43
Attaching a Wall or Arm mounting device
The TV supports VESA mounting standard for use with various VESA mounting
devices. To install any VESA mounting device, please follow the instructions given.
<A>
<B>
1
Lay the LCD TV face-down on a flat surface with a cushion or other soft materials
to protect the screen.
2
Remove all cables connected on the TV.
3
Remove the four screws and then remove the stand from the LCD TV(refer to pictures A&B).
4
Connect all cables you removed in step 1.
5
Now you are ready to install Wall/Arm mounting device.
English-43
ENG-44-49.qxd
9/8/03 6:13 PM
Page 44
Installing VESA compliant mounting devices
Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with
the four screws that come with the arm-type base, wall mount hanger or other bases.
Rear cover
English-44
Mounting pad
ENG-44-49.qxd
9/8/03 6:13 PM
Page 45
Kensington Slot
Cable
Figure 2
Figure 1
<Optional>
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may differ
from the illustration depending on the manufacturer. Please refer to the manual provided with the
Kensington lock for proper use.
1
Insert the locking device into the Kensington slot on the LCD TV (Figure 1),
and turn it in the locking direction (Figure 2).
2
Connect the Kensington lock cable.
3
Fix the Kensington lock to a desk or a heavy stationary object.
English-45
ENG-44-49.qxd
9/8/03 6:13 PM
Page 46
Wiring the Mains Power Supply Plug (UK Only)
IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse
is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same
rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable.
If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement
covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the
cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead
or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse
and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock
hazard from the bared flexible cord.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
BLUE - NEUTRAL
BROWN - LIVE
As these colours may not correspond to the coloured markings identifying the terminals in your plug,
proceed as follows:
The wire coloured BLUE must be connected to the terminal marked with the letter N or colored BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or colored BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED
WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR
GREEN AND YELLOW.
English-46
ENG-44-49.qxd
9/8/03 6:13 PM
Page 47
Memo
English-47
ENG-44-49.qxd
9/8/03 6:13 PM
Memo
English-48
Page 48
ENG-44-49.qxd
9/8/03 6:13 PM
Page 49
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
ELECTRONICS
Download PDF

advertising