Samsung | LW17N23W | Samsung LW17N23W Benutzerhandbuch

01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 1
LCD TV
LW17N23W
LW17N23N
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 2
Information in this document is subject to change without notice.
© 2003 Samsung Electronics Co., Ltd. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden.
Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material.
The Samsung logo is the registered trademarks of Samsung Electronics Co., Ltd.; Microsoft, Windows® and Windows® NT are
registered trademark of Microsoft Corporation; VESA, DPMS and DDC are registered trademarks of Video Electronics Standard
Association. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.
TRADEMARK & LABEL LICENSE NOTICE
is a trademark of SRS Labs, Inc.
WOW technology is incorporated under license from SRS labs, Inc.
English-2
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 3
English-3
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 4
Contents
◆ CONNECTING AND PREPARING YOUR TV
■
■
■
■
■
■
■
■
■
■
■
■
■
Viewing the Control Panel .............................................................................
Viewing the Connection Panel ......................................................................
- Connecting an Aerial or Cable Television Network....................................
- Connecting a Set-Top Box, VCR, or DVD .................................................
- Connecting a Computer .............................................................................
- Connecting External A/V Devices ..............................................................
- Connecting Headphones ...........................................................................
- Kensington Slot..........................................................................................
Viewing Pictures From External Sources......................................................
Inserting the Batteries in the Remote Control ...............................................
Viewing the Remote Control (All Functions Except Teletext)........................
Viewing the Remote Control (Teletext Functions) .........................................
Switching On and Off ....................................................................................
Placing in Standby Mode ..............................................................................
Becoming Familiar with the Remote Control.................................................
Plug & Play....................................................................................................
Selecting TV Mode or an Input Source .........................................................
Editing an Input Source Name ......................................................................
Choosing Your Language ..............................................................................
◆ SETTING
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
English-4
THE
THE
21
22
24
25
26
27
PICTURE
Changing the Picture Standard .....................................................................
Adjusting the Custom Picture........................................................................
Adjusting the Screen Background Colour .....................................................
Selecting the Picture Format.........................................................................
Freezing the Current Picture .........................................................................
Viewing the Picture In Picture (PIP) ..............................................................
◆ SETTING
■
CHANNELS
Storing Channels Automatically.....................................................................
Storing Channels Manually ...........................................................................
Editing the Channels .....................................................................................
Sorting the Stored Channels .........................................................................
Giving Channels Names................................................................................
Fine Tuning Channel Reception....................................................................
◆ SETTING
■
THE
6
7
8
8
8
9
9
9
10
11
12
13
14
14
15
16
18
19
20
28
29
30
31
31
32
SOUND
Changing the Sound Standard......................................................................
Adjusting the Custom Sound.........................................................................
Selecting Wow Surround...............................................................................
Selecting Auto Volume Control......................................................................
Selecting the Sound Mode ............................................................................
Adjusting Your Headphone Preferences .......................................................
Selecting a Sound Mode for the Sub-Screen................................................
34
35
36
37
37
38
39
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 5
Contents
◆ SETTING
■
■
■
◆ USING
■
■
◆ USING
■
■
■
■
■
◆ USING
■
■
■
■
■
THE
TIME
Setting the Clock ...........................................................................................
Switching Off Automatically ...........................................................................
Switching the Television On and Off Automatically .......................................
THE
VARIOUS FUNCTIONS
Setting the Blue Screen Mode ......................................................................
Displaying Information...................................................................................
THE
43
43
PC FUNCTIONS
Setting Up Your PC Software ........................................................................
Coarse and Fine Tuning of the Image...........................................................
Changing the Image Position ........................................................................
Initializing the Image Settings .......................................................................
Adjusting the PC Screen Automatically.........................................................
THE
40
41
42
44
45
46
47
48
TELETEXT FEATURE
Teletext Feature.............................................................................................
Displaying the Teletext Information ...............................................................
Selecting a Page by Number ........................................................................
Using FLOF to Select a Page .......................................................................
Storing Teletext Pages ..................................................................................
49
50
51
52
53
◆ RECOMMENDATIONS FOR USE
■
■
■
■
■
■
■
■
Troubleshooting: Before Contacting Service Personnel ...............................
Power Saver..................................................................................................
Technical and Environmental Specifications .................................................
Display Modes...............................................................................................
Maintenance of Your Television.....................................................................
How to connect the cables and stand base ..................................................
Installing the Wall Mount Kit (Sold separately) .............................................
Wiring the Mains Power Supply Plug (UK Only)...........................................
54
55
56
57
58
59
60
62
Symbols
Press
Important
Note
English-5
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 6
Viewing the Control Panel
Colors may vary depending on the model you purchase.
TV/VIDEO
Displays a menu of all of the available input sources
(TV - AV1 - AV2 - AV3 - S-Video - PC).
POWER
Turns ON/OFF your set.
SPEAKER
MENU
Opens the on-screen menu.
-
+
Moves the selector left or right on the OSD.
Increases or decreases the level of audio
volume and the values of the selected function.
Moves the selector up or down on the OSD.
Increases or decreases the channel number.
English-6
REMOTE CONTROL SENSOR
POWER INDICATOR
Lights up when you turn the power off.
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 7
Viewing the Connection Panel
Colors may vary depending on the model you purchase.
Option
Power Input
Whenever you connect an audio or video system to your set,
ensure that all elements are switched off.
Refer to the documentation supplied with your equipment for
detailed connection instructions and associated safety precautions.
English-7
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 8
Viewing the Connection Panel
Connecting an Aerial or Cable Television Network (depending on the model)
To view television channels correctly, a signal must be received by the set from one of the
following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting a Set-Top Box, VCR, or DVD
- Connect the VCR, or DVD SCART cable to the SCART connector of the VCR, or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the
Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Connecting a Computer
- Connect the 15 Pin D-SUB connector to the PC video connector.
- Connect the stereo audio cable to the “Audio (ST)” jack on the rear of your set and the other end to
the “Audio Out” jack of the sound card on your computer.
➣ 15 Pin D-SUB connector
English-8
Pin
Separate H/V
Composite H/V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC return)
Grounding - Red (R)
Grounding - Green (G)
Grounding - Blue (B)
No connection
Grounding - Sync. / Self test
Grounding
DDC - SDA (Data)
Horizontal Sync.
Vertical Sync.
DDC - SCL (Clock)
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC return)
Grounding - Red (R)
Grounding - Green (G)
Grounding - Blue (B)
No connection
Grounding - Sync. / Self test
Grounding
DDC - SDA (Data)
Horizontal/Vertical Sync.
Not used
DDC - SCL (Clock)
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 9
Viewing the Connection Panel
Connecting External A/V Devices
- Connect RCA or S-VIDEO cables to an appropriate external A/V device such as a VCR, DVD,
or Camcorder.
- Connect RCA audio cables to “AUDIO (L)” and “AUDIO (R)” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphones may be connected to the headphone output ( ) on the rear of your set.
While the headphones are connected, the sound from the built-in speakers will be disabled.
Connecting Headphones
- Plug a set of headphones into the 3.5mm mini-jack socket on the rear of the set.
Kensington Slot
- This television has been designed to apply a burglarproof lock.
Retractable Stand
Tilt the screen until you feel comfortable.
The maximum tilt angle is 10 degrees in the backward direction.
Please do not tilt the television beyond the specified range.
Using excessive force to tilt the television beyond the
specified range may cause permanent damage to the
mechanical part of the stand.
English-9
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 10
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1
2
Check that all the necessary connections have been made
(refer to pages 8 and 9 for further details).
PC button...
Press the PC button to choose PC mode.
Video button...
Press the Video button to choose Video mode.
The input sources are displayed in the following order:
AV1 - AV2 - AV3 - S-Video.
TV button...
Press the TV button to choose TV mode.
English-10
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 11
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you:
Purchase your set
Find that the remote control is no longer operating correctly
1
Remove the cover on the rear of the remote control by pressing the
symbol downwards and then pulling firmly to remove it.
2
Install two AAA size batteries.
◆ + on the battery against + on the remote control
◆ - on the battery against - on the remote control
3
Replace the cover by aligning it with the base of the remote control
and pressing it back into place.
Do not mix battery types, i.e. alkaline and manganese.
English-11
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 12
Viewing the Remote Control
Television On/Off
Picture size selection
(All Functions Except Teletext)
Select to the PC mode directly
Picture freeze
Automatic switch-off
Numeric buttons for
direct channel access
Previous channel
One/Two-digit channel
selection
Temporary sound switch-off
-Next channel
-Previous channel
Available source selection
Volume up or down
Select to the TV mode directly
Menu display and
change confirmation
Use to see information on the
current broadcast.
Exit the OSD
Control the cursor in the menu
Sound effect selection
SRS selection
Sound mode selection
Picture effect selection
PIP FUNCTIONS
PIP ON
: Picture-In-Picture
On/ Off
POSITION : PIP position selection
TV/VIDEO : PIP source selection
SIZE
: PIP size selection
SWAP
: Interchange the main
and sub picture
P
/
: PIP Channel selection
The performance of the remote control may be affected by bright light.
English-12
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 13
Viewing the Remote Control
(Teletext Functions)
Teletext hold
Teletext sub page
P
P
: Teletext next page
: Teletext previous page
Teletext mode selection
(LIST/FLOF)
Exit from the teletext display
Teletext reveal
Teletext index
Fasttext topic selection
Teletext display/mix
both teletext information
and the normal broadcast
Teletext cancel
Teletext size selection
Teletext store
English-13
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 14
Switching On and Off
The mains lead is attached to the rear of your set.
If you purchased this set in the United Kingdom,
refer to page 62 for further instructions on plug wiring.
1
Plug the mains lead into an appropriate socket.
Result:
When the adaptor is plugged in, the LED turns red.
2
Press the
POWER button to switch on.
3
To switch off, press the
POWER button again.
Colors may vary depending on the model you purchase.
Placing in Standby Mode
Your set can be placed in Standby mode in order to reduce the
power consumption.
The Standby mode can be useful when you wish to interrupt viewing
temporarily (during a meal, for example).
1
Press the
POWER button.
2
To switch back on, simply press the
or a numeric button.
POWER button again
Do not leave your set in Standby mode for long periods of
time (when you are away on holiday, for example).
Turn off by pressing the POWER button.
It is best to unplug the set from the mains and aerial.
English-14
01-BN68-00437D-01Eng
2/9/04 3:27 AM
Page 15
Becoming Familiar with the Remote Control
The remote control is used mainly to:
Change channels and adjust the volume
Set up your set using the on-screen menu system
The following table presents the most frequently used buttons and their
functions.
Button
PRE-CH
~
-/--
MUTE
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the
previous stored channel.
-
Used to switch repeatedly between the last two channels
displayed. (PRE-CH; Previous Channel)
Used to display the corresponding channels.
Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
Used to increase the
volume.
-
Used to decrease the
volume.
-
Used to switch the sound off temporarily.
To turn the sound back on, press this button again,
or press the
+ or
- button.
MENU
EXIT
Used to display the
Used to return to the previous
on-screen menu system.
menu or normal viewing.
Used to exit the menu system and return directly to normal
viewing.
Used to move among the menu items.
Used to select a menu item or increase
the value of the selected item.
Used to return to the previous menu item or
decrease the value of the selected item.
English-15
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 16
Plug & Play
When the set is initially powered ON, you are automatically presented
with a series of basic customer settings.
The following settings are available.
1
If the set is in standby mode, press the
on the remote control.
Result:
2
POWER button
The message Plug & Play is displayed.
It appears for a little while, and then the Language
menu is automatically displayed.
Select the appropriate Language by pressing the
or
button.
The available languages are listed.
You can choose one of 18 Languages.
3
Press the ENTER
Result:
The message Antenna Input Check is displayed with
OK selected.
4
Press the ENTER
5
Select your Country by pressing the
Press the ENTER
button.
Result:
button.
or
button.
The country menu is displayed:
Belgie - Deutschland - Espania - France - Italia Nederland - Schweiz - Sverige - UK East Europe - Others
6
Select the Hour or Min by pressing the or
button.
Set the Hour or Min by pressing the or
button.
(Refer to “Setting the Clock” on page 40)
7
Press the MENU button to confirm your setting.
Result:
English-16
button to confirm your choice.
The message Enjoy your watching is displayed,
and then the channel which has been stored will be
activated.
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 17
Plug & Play
If you want to reset this feature...
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
4
Press the or
button to select the Plug & Play.
Press the ENTER
button.
Result:
5
button.
The message Plug & Play is displayed.
For further details on how to set up this feature,
refer to page 16 and 25.
The Sort menu is displayed after the Plug & Play ends.
English-17
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 18
Selecting TV Mode or an Input Source
You can choose TV mode or change to an input source connected to
the TV set. Use this button to choose an input source that you would
like to watch.
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select the Input.
The options available in the Input group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
5
The TV/Video is selected.
Press the or
button to move to the input source that
you wish to choose.
Press the ENTER
button.
Result:
English-18
The main menu is displayed.
The input source changes to the one you have chosen.
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 19
Editing an Input Source Name
Entering the names of the input source devices connected to the input
ports on the TV set allows you to find and choose an input source that
you would like to watch in a quick and convenient manner.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Input.
The options available in the Input group are displayed.
3
Press the ENTER
4
Press the or
button to select the Edit Name.
Press the ENTER
button.
5
Press the or
button to move to the input source that
you wish to edit.
Press the ENTER
button.
Result:
6
The following options are available:
AV 1 - AV 2 - AV 3 - S-Video - PC
Select the required device by pressing the
Result:
7
button.
or
repeatedly.
The following options are available:
---- - VCR - DVD - Cable STB - HD STB - Satellite STB AV Receiver - DVD Receiver - Game - Camcorder - DVD
Combo - DHR - PC.
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
English-19
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 20
Choosing Your Language
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indicators.
1
Press the MENU button.
Result:
2
Press the
Result:
English-20
The main menu is displayed.
or
button to select the Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the or
button to select the Language.
Press the ENTER
button.
5
Select a particular Language by pressing the
repeatedly.
6
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
or
button
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 21
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers.
However you can sort numbers manually and clear any channels you
do not wish to watch.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select ATM.
Press the ENTER
button.
Result:
5
button.
The Start is selected.
Press the ENTER
button to search the channels.
The sub menu is changed from Start to Stop with channel
search started.
Result:
The search will end automatically.
Channels are sorted and stored in an order which reflects
their position in the frequency range, (with lowest first and
highest last). The programme originally selected is then
displayed.
To return to the previous menu, press or
Return and then press ENTER
button.
button to select
To stop the search before it has finished, press the ENTER
button to search the channels.
6
When the channels have been stored, you can:
Add or delete the channels (refer to page 24)
Sort them in the order required (refer to page 25)
Assign a name to the stored channels (refer to page 26)
Fine tune channel reception if necessary (refer to page 27)
English-21
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 22
Storing Channels Manually
You can store up to 100 channels, including those received via
cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found
The programme number of each stored channel which you wish to
identify
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select the Manual Store.
Press the ENTER
button.
Result:
5
6
The options available in the Manual Store group are
displayed with the Prog. No selected.
or
button
The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NT 4.43
Press the or
button to select Sound System.
Press the ENTER
button.
Select the Sound System required by pressing the
repeatedly and then press the ENTER
button.
Result:
7
button.
Press the or
button to select Colour System.
Press the ENTER
button.
Select the Colour System required by pressing the
repeatedly and then press the ENTER
button.
Result:
English-22
The main menu is displayed.
or
button
The sound standards are displayed in the following order:
BG - DK - I - L
For all the channels to move to the required channel numbers,
repeat steps 5 to 6 after selecting Prog. No by pressing the
or
button.
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 23
Storing Channels Manually
8
If you know the channel number to be stored,
Press the or
button to select the Channel.
Press the ENTER
button.
Select C (Air channel) or S (Cable channel) by pressing the
or
button and then press the ENTER
button.
Select the required number by pressing the or
button
and then press the ENTER
button.
If there is normal sound or no sound, re-select the
sound system required.
9
If you do not know the channel numbers, press the
to select Search.
Press the ENTER
button.
Start the Search by pressing the or
button.
Press the ENTER
button.
Result:
10
button
The tuner scans the frequency range until the first channel
or the channel that you selected is received on your screen.
Press the or
button to select Store.
Press the ENTER
button.
Select YES by pressing the or
button.
Press the ENTER
button.
Result:
11
or
The channel and associated programme number are
stored.
Repeat Steps 8 to 10 for each channel to be stored.
English-23
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 24
Editing the Channels
You can exclude any channels of your choice from the channels you
have scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select Add/Delete.
Press the ENTER
button.
Result:
5
button.
The state of the current channel is displayed.
Press the
or
Add or Delete.
Result:
English-24
The main menu is displayed.
button to select the channel that you wish to
If the channel that you wish to edit is not in the memory,
Add is selected and displayed.
Otherwise, if the channel that you wish to edit is in the
memory, Delete is selected and displayed.
6
Press the ENTER
button to Add or Delete the channel.
7
To return to the previous menu, select Return by pressing the
or
button and then press the ENTER
button.
8
Repeat Step 5 for each channel to be added or erased.
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 25
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Assign easily remembered numbers to the channels that you watch
most often.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select Sort.
Press the ENTER
button.
Result:
5
The selected Channel number and Name are moved
to the right side.
Press the or
button to move to the position which you would
like to change and then press the ENTER
button.
Result:
7
The current Prog. No, Channel and Name are
displayed.
Select the channel number that you wish to change by pressing
the or
button repeatedly.
Press the ENTER
button.
Result:
6
button.
The selected channel is exchanged with the one
previously stored to the chosen number.
Repeat step 5 to 6 for another channel to sort again.
English-25
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 26
Giving Channels Names
If channel name information is broadcast when you store the channels
either manually or automatically, the names are assigned to the
channels directly. You can however change these names or assign
new names as required.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
4
Press the or
button to select the Name.
Press the ENTER
button.
Result:
5
The current Prog. No, Channel and Name are displayed.
If necessary, select the channel to be assigned to a new Name
by pressing the or
button.
Press the ENTER
button.
Result:
6
button.
The selection bar is displayed around the name box.
To...
Then...
Select a letter, number or symbol
Press the
or
Move on to the next letter
Press the
button
Move back to the previous letter
Press the
button
Confirm the name
Press the ENTER
The characters available are :
Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters (space, _, -, *)
English-26
7
Repeat Steps 5 to 6 for each channel to be assigned to a
new name.
8
When you have finished entering the name,
press the ENTER
button to confirm the name.
button
button
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 27
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to fine-tune
the channel manually.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Channel.
The options available in the Channel group are displayed.
3
Press the ENTER
button.
4
Press the or
button to select the Fine Tune.
Press the ENTER
button.
5
Press the
or
Fine Tune.
6
Press or
button until you reach the setting to obtain a sharp
and clear picture and good sound quality.
To store the setting, press the ENTER
button.
7
To reset the fine tuning, select Reset by pressing the or
button
and then press the ENTER
button.
To return to the previous menu, select Return by pressing the
or
button and press the ENTER
button.
button to select the channel that you wish to
English-27
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 28
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
5
The Picture Mode is selected.
Select the required picture effect by pressing the
repeatedly.
Press the ENTER
button.
Result:
or
The following picture effects are available:
Dynamic - Standard - Movie - Custom
You can also set these options simply by pressing the
P.MODE (Picture Mode) button.
English-28
button
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 29
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
4
Press the or
button to select the Custom Picture.
Press the ENTER
button.
5
Select the option (Contrast, Brightness, Sharpness, Colour
or Tint-NTSC only) to be adjusted by pressing the or button.
Press the ENTER
button.
Result:
button.
The horizontal bar is displayed.
6
Press the
or
button to reach the required setting.
7
When you are satisfied with the setting, press the MENU button
to return to the previous menu or press the EXIT button to return to
normal viewing.
If you make any changes to these settings,
the picture standard is automatically switched to Custom.
English-29
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 30
Adjusting the Screen Background Colour
You can change the screen background colour according to your
preference.
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
4
Press the or
button to select the Colour Tone.
Press the ENTER
button.
Result:
5
English-30
The main menu is displayed.
button.
The following options are available:
Cool 2 - Cool 1 - Normal - Warm 1 - Warm 2
When you are satisfied with your choice, press the EXIT button
to return to normal viewing.
02-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 31
Selecting the Picture Format
You can select the picture format which best corresponds to
your viewing requirements.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
4
Press the or
button to select the Size.
Press the ENTER
button.
5
Select the required picture format by pressing the
repeatedly.
Press the ENTER
button.
Result:
button.
or
button
The following options are available:
Auto Wide - Wide - Panorama - Zoom 1 - Zoom 2 - 4:3
You can also set these options simply by pressing the
P.SIZE (Picture SIZE) button.
This feature does not work when the PIP (Double Window)
feature is active.
Freezing the Current Picture
Press the “STILL” button on the remote control to freeze the picture
on a given frame.
To return to normal viewing, press the “STILL” button again.
Not Available in PC mode.
English-31
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 32
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of a set
programme or video input. In this way you can watch or monitor the set
programme or video input from any connected equipment while
watching the set or other video input.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Picture.
The options available in the Picture group are displayed.
3
Press the ENTER
4
Press the or
button to select the PIP.
Press the ENTER
button.
Result:
button.
The options available in the PIP menu are displayed.
5
Press the ENTER
6
Select On by pressing the or
Press the ENTER
button.
7
PC Only....
Press the or
button to select TV/Video.
Press the ENTER
button.
Select the source of the sub picture by pressing the
and then press the ENTER
button.
[PC Only]
Result:
button.
button.
or
button
The sources are displayed in the following order:
TV - AV1 - AV2 - AV3 - S-Video
PC Only
“TV/Video” and “Prog.No” are inactive and not available in TV mode.
However, they become active and available in PC mode.
8
To swap the main picture and the sub picture, select the Swap
option and press the ENTER
button.
Result:
9
Press the or
button to select the Size.
Press the ENTER
button.
Select the size of the sub picture by pressing the
and then press the ENTER
button.
Result:
English-32
The main picture and the sub picture are interchanged.
or
The sizes are displayed in the following order:
Small Double1 Double2
button
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 33
Viewing the Picture In Picture (PIP)
10
Press the or
button to select the Position.
Press the ENTER
button.
Select the position of the sub picture by pressing the
and then press the ENTER
button.
Result:
or
button
You can move the sub picture counterclockwise.
When the size of sub picture is set to
Double1 or Double2, this feature does not work.
11
To return to normal viewing press the EXIT button.
Remote-control functions while "PIP" is "On":
Features
Description
PIP ON
Used to operate the ON/OFF function of
PIP directly.
SWAP
Used to interchange the main picture and the
sub picture.
When the main picture is in Video mode
and the sub picture is in the set mode,
you might not hear the sound of main
picture when pressing the SWAP button
after changing the sub picture channel.
At this time, reselect the main picture
channel.
/
Used to select the channel of sub picture.
PIP Settings
O : PIP operates
X : PIP does not operate
Sub Picture
TV
AV1
AV2
AV3
S-Video
PC
TV
X
X
X
X
X
O
AV1
X
X
X
X
X
O
AV2
X
X
X
X
X
O
AV3
X
X
X
X
X
O
S-Video
X
X
X
X
X
O
PC
O
O
O
O
O
X
Main Picture
English-33
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 34
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
5
The Sound Mode is selected .
Select the required sound effect by pressing the
repeatedly.
Press the ENTER
button.
Result:
or
The following sound effects are available:
Standard - Music - Movie - Speech - Custom
You can also set these options simply by pressing the
S.MODE (Sound Mode) button.
English-34
button
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 35
Adjusting the Custom Sound
The sound settings can be adjusted to suit your personal preferences.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
4
Press the or
button to select the Custom Sound.
Press the ENTER
button.
5
Select the option (Volume, L/R, 100, 300, 1K, 3K, 10K) to
be adjusted by pressing the or
button.
Press the ENTER
button.
Result:
button.
The Vertical bar is displayed.
6
Press the
or
button to reach the required setting.
7
When you are satisfied with the setting, press the MENU button
to return to the previous menu or press the EXIT button to return to
normal viewing.
If you make any changes to these settings,
the Sound standard is automatically switched to Custom.
English-35
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 36
Selecting WOW Surround
Select the Wow Surround feature to amplify the mid- to low-range
sounds or create a surround sound effect.
1
Press the MENU button.
Result:
2
Press the
Result:
English-36
The main menu is displayed.
or
button to select the Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
button.
4
Press the or
buttons to select WOW.
Press the ENTER
button.
5
Press the or
button to select Off/On.
Press the ENTER
button.
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 37
Selecting Auto Volume Control
Reduces the differences in volume level between broadcasters.
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the
Result:
or
button to select the Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
button.
4
Press the or
button to select Auto Volume.
Press the ENTER
button.
5
Press the or
button to select Off/On.
Press the ENTER
button.
Selecting the Sound Mode
You can set the sound mode by pressing the "DUAL I-II" button.
When you press it, current sound mode is displayed on the screen.
FM
Stereo
Audio Type
DUAL 1/2
Mono
MONO
Stereo
STEREO
MONO
Automatic
change
Dual
DUAL 1
DUAL 2
DUAL 1
Mono
Stereo
NICAM
Stereo
Default
Dual
MONO
MONO
STEREO
MONO
DUAL 1
Automatic
change
DUAL 1
DUAL 2
If the receiving conditions deteriorate, listening will be easier
if the mode is set to Mono.
If the stereo signal is weak and automatic switching occurs,
switch to Mono.
English-37
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 38
Adjusting Your Headphone Preferences
You can adjust the headphone settings to suit your preferences.
The following headphones settings are available:
Volume, Balance, Bass, Treble.
1
Press the MENU button.
Result:
2
Press the
Result:
or
button to select the Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
4
Press the or
button to select Headphone.
Press the ENTER
button.
5
Select the option (Volume, Balance, Bass, Treble)
to be adjusted by pressing the or
button.
Press the ENTER
button.
Result:
English-38
The main menu is displayed.
button.
The horizontal bar is displayed.
6
Press the
or
button to reach the required setting.
7
When you are satisfied with the setting, press the MENU button
to return to the previous menu or press the EXIT button to return to
normal viewing.
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 39
Selecting a Sound Mode for the Sub-Screen
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select the Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
button.
4
Press the or
button to select the Sound Select.
Press the ENTER
button.
5
Press the or
button to select Main/Sub.
Press the ENTER
button.
You can use the sub-screen sound mode feature
only when the PIP feature is ON.
English-39
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 40
Setting the Clock
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
The Time is selected.
5
Press the ENTER
button.
Press the or
button to set the Hour.
6
Press the
Press the
7
Press the ENTER
Result:
or
or
button to move to Min.
button to set the minutes.
button.
The clock is set.
You can also set the time using the numeric buttons on the remote.
English-40
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 41
Switching Off Automatically
You can select a time period of between -- and 180 minutes after which
your set automatically switches off.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
4
Press the or
button to select the Sleep Timer.
Press the ENTER
button.
5
Select the number of minutes after which your set switches On
by pressing the or
button repeatedly.
Result:
button.
The preset time intervals:
- -, 30, 60, 90, 120, 150, 180 minutes.
You can also select this feature by simply pressing the "SLEEP"
button.
If the sleep timer is already set, the screen displays the remaining
time and then your set will be switched Off.
If the sleep timer is not yet set, Off is displayed.
Off • 30 • 60 • 90 • 120 • 150 • 180 • Off
English-41
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 42
Switching the Television On and Off Automatically
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice
at the time you select.
Switch off automatically at the time you select.
1
Press the MENU button.
Result:
2
The main menu is displayed.
Press the
Result:
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button.
Result:
5
The Time menu are displayed with Clock selected.
Press the or
button to select the On Timer.
Press the ENTER
button.
Result:
The On Timer menu is displayed.
To...
English-42
Press the...
Move to Hour, Min, Prog. No and Volume
or
button
Set Hour, Min, Prog. No and
Volume level
or
button
Move to Set
or
button
Select On to enable above setting
or
button
6
Press the or
button to select Off timer.
In the same way, set the time at which you wish the set to
be switched off automatically.
7
To display the...
Press the...
Current time and selected audio/video
setting status
INFO button
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 43
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
"Blue Screen" mode to "Off".
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
button.
4
Press the or
button to select Blue Screen.
Press the ENTER
button.
5
Select the required option (On or Off) by pressing the
or
button.
6
Press the EXIT button to return to normal viewing.
Displaying Information
You can view the setting status of the selected source by pressing the
"INFO" button on the remote control.
The information displayed varies according to the selected source.
English-43
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 44
Setting Up Your PC Software (Based on Windows 2000)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC
will probably be different, depending upon your particular version of Windows and your particular video
card. However, even if your actual screens look different, the same basic set-up information will apply in
almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1
First, click on “Settings” on the Windows start menu.
While “Settings” is highlighted, move the cursor
so that “Control Panel” is highlighted.
2
When the control panel window
appears, click on “Display” and a
display dialog-box will appear.
3
Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution)
- 1280 x 768 pixels
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
1280 by 768 pixels
English-44
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 45
Coarse and Fine Tuning of the Image
Preset to PC mode by pressing the PC button.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press theENTER
4
Press the or
button to select PC Setup.
Press the ENTER
button.
Result:
5
6
The options available in the PC Setup menu
are displayed.
Press the ENTER
Result:
button.
button.
The Image Lock menu is selected.
Press the or
button to select Coarse or Fine.
Press the ENTER
button.
Result:
The horizontal bar is displayed.
7
Press the or
button to adjust the screen quality.
Vertical stripes may appear or the picture may become blurry.
8
When you are satisfied with the settings, press the MENU button
to return to the previous menu or press the EXIT button to return to
normal viewing.
English-45
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 46
Changing the Image Position
Preset to PC mode by pressing the PC button.
1
Press the MENU button.
Result:
2
Press the
Result:
or
Press the ENTER
4
Press the or
Press ENTER
5
button to select Setup.
The options available in the Setup group are displayed.
3
Result:
button.
button to select PC Setup.
button.
The options available in the PC Setup menu
are displayed.
Press the or
button to select Position.
Press the ENTER
button.
Result:
English-46
The main menu is displayed.
You can adjust the image Position.
6
Press the
Press the
or
or
button to adjust the vertical position.
button to adjust the horizontal position.
7
Press the MENU button to return to the previous menu or
press the EXIT button to return to normal viewing.
03-BN68-00437D-01Eng
2/9/04 3:26 AM
Page 47
Initializing the Image Settings
Preset to PC mode by pressing the PC button.
You can replace all image settings with the factory default values.
1
Press the MENU button.
Result:
2
Press the
Result:
The main menu is displayed.
or
The options available in the Setup group are displayed.
3
Press the ENTER
4
Press the or
Press ENTER
Result:
button to select Setup.
button.
button to select PC Setup.
button.
The options available in the PC Setup menu are
displayed.
5
Press the or
button to select Reset.
Press the ENTER
button.
6
Select the option (Image Reset or Colour Reset) to be replaced
by pressing the or
button.
Press the ENTER
button.
English-47
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 48
Adjusting the PC Screen Automatically
Preset to PC mode by pressing the PC button.
1
Press the MENU button.
Result:
2
Press the
Result:
or
Press the ENTER
4
Press the or
Press ENTER
5
button to select Setup.
The options available in the Setup group are displayed.
3
Result:
button.
button to select PC Setup.
button.
The options available in the PC Setup menu
are displayed.
Press the or
button to select Auto Adjustment.
Press the ENTER
button.
Result:
English-48
The main menu is displayed.
The screen quality and position are automatically adjusted,
and the screen returns to the original view a few seconds
later.
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 49
Teletext Feature
Most television channels provide written information services
via teletext.
Information provided includes:
Television programme times
News bulletins and weather forecasts
Sports results
Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indicators.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
Teletext information is often divided between several pages displayed
in sequence, which can be accessed by:
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
English-49
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 50
Displaying the Teletext Information
You can display Teletext information at any time on your set.
☛
For Teletext information to be displayed correctly,
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
Select the channel providing the Teletext service using the
or
button.
2
Press the TEXT/MIX button to activate the teletext mode.
Result:
English-50
The contents page is displayed. It can be redisplayed
at any time by pressing the
(index) button.
3
If you wish to display the actual broadcast at the same time as the
teletext page, press the TEXT/MIX button again.
4
To return to normal viewing, press the
5
Press the TV
(cancel) button.
button again to exit the teletext display.
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 51
Selecting a Page by Number
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by pressing
the corresponding numeric buttons.
Result:
2
The current page counter is incremented and the page
is then displayed.
If the selected page is linked with several secondary pages,
the secondary pages are displayed in sequence.
To freeze the display on a given page, press the
(hold) button.
Press the
(hold) button again to resume.
Using the various display options:
To display...
Press the...
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page,
by entering its 4-digit number
(subpage)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
English-51
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 52
Using FLOF to Select a Page
The various topics included in the teletext pages are colour-coded, and
can be selected by pressing the coloured buttons on the remote control.
1
Display the teletext contents page by pressing the
TEXT/MIX button.
2
Press the coloured button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result:
The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
◆ Press the
Result:
(subpage) button.
The available subpages appear.
◆ Select the required subpage.
Subpages can be scrolled by using the
English-52
or
button.
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 53
Storing Teletext Pages
You can store up to four teletext pages to display them later at leisure.
1
Select the LIST mode using the
Result:
(LIST/FLOF) button.
Four 3-digit numbers are displayed in different colours.
The
(LIST/FLOF) button is used to switch between
the LIST and FLOF modes.
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a different
coloured button each time.
5
Press the
(store) button until the corresponding blocks blink.
English-53
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 54
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of
your set and contact your local dealer.
No sound or picture
◆
◆
◆
◆
Normal picture but no sound
◆ Check the volume.
◆ Check whether the MUTE button has been pressed on the
remote control.
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the set
and move it further away.
◆ Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
“Check Signal Cable” message is
displayed.
◆ Check that the signal cable is firmly connected to the
PC or video sources.
◆ Check that the PC or video sources are turned on.
In PC mode, “Not Supported Mode”
message is displayed.
◆ Check the maximum resolution and the frequency of the
video Adapter.
◆ Compare these values with the data in the Display Modes Timing
Chart.
In PC mode, horizontal or vertical bars
appear to flicker, jitter or shimmer
on the image.
◆ Adjust the Coarse or Fine function.
In PC mode, the screen is black and the
power indicator light is steady amber or
blinks every 0.5 or 1 seconds.
◆ The TV is using its power management system.
◆ Move the computer’s mouse or press a key on the keyboard.
English-54
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the POWER button.
Check the picture contrast and brightness settings.
Check the volume.
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 55
Troubleshooting: Before Contacting Service Personnel
In PC mode, the image is not stable and
may appear to vibrate.
◆ Check that the display resolution and frequency from your
computer or video board is an available mode for your set.
On your computer check: Control Panel, Display, Settings.
◆ If the setting is not correct, use your computer utility programme to
change the display settings.
Your set supports multiscan display functions within the
following frequency domain:
In PC mode, the image is not centred on
the screen.
Horizontal frequency -
30 ~ 68 kHz
Vertical frequency -
56 ~ 85 Hz
Maximum refresh rate -
1280 x 768 @ 60Hz
◆ Adjust the horizontal and vertical position.
PowerSaver
This set has a built-in power management system called PowerSaver. This system saves energy by
switching your set into a low-power mode when it has not been used for a certain period of time.
The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a VESA
DPMS compliant video card installed in your computer. You use a software utility installed on your
computer to set up this feature.
Normal Operation
Power-Saving Function mode
Horizontal Sync
Active
Inactive
Vertical Sync
Active
Inactive
Power Indicator
Green
Green, Blinking (1 sec interval)
52 W (Normal)
Less than 3 W
State
Power Consumption
➣
(EPA/NUTEK)
This set automatically returns to normal operation when horizontal and vertical sync
are restored.
This occurs when you move the computer’s mouse or press a key on the keyboard.
English-55
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 56
Technical and Environmental Specifications
Model
LW17N23W / LW17N23N
Panel
Size
Display Size
Type
Pixel Pitch
Viewing Angle
17” Diagonal
370.56 (H) x 222.36 (V) mm
a-si TFT active matrix
0.2895 (H) x 0.2895 (V) mm
170/170 (Horizontal/Vertical)
Frequency
Horizontal
Vertical
Display colour
30 ~ 68 kHz
56 ~ 85 Hz
16,777,216 colours
Display Resolution
Maximum Mode
1280 x 768 @ 60 Hz
Input Signal
Sync.
Video Signal
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
Power Supply
Input
Output
AC 100 ~ 240 V (50 / 60 Hz)
DC 14 V / 4.5 A
Power Consumption
Normal
Power Saving
52 W
<3W
Dimensions (W x D x H) / Weight
TV Body
With Stand
18.26 x 3.45 x 13.60 inch / 9.7 lbs
(463.8 x 87.7 x 345.0 mm / 4.4 kg)
18.26 x 7.05 x 14.32 inch / 10.4 lbs
(463.8 x 179.0 x 363.7 mm / 4.72 kg)
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%
- 13 °F to 113 °F (-25 °C to 45 °C)
5% to 95%
Audio Characteristics
Audio Input 1
Audio Input 2 (PC)
Headphone Output
Frequency
Response
RCA Jack (L, R), 0.5 Vrms (-9dB)
3.5Ø Stereo Jack, 0.5 Vrms (-9dB)
Max. 10 mW Output (3.5Ø Stereo Jack, 32Ω)
RF: 80 Hz ~ 15 kHz (at- 3dB)
A/V: 50 Hz ~ 15 kHz (at- 3dB)
English-56
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 57
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically.
If the signal from the system does not equal the standard signal mode, adjust the mode with reference
to the Video card user guide, as the screen may not display or only the power LED may be on.
For the display modes listed below, the screen image has been optimised during manufacture.
Mode
Macintosh
IBM
VESA
GTF
Resolution
Horizontal
Vertical
Pixel Clock
Sync Polarity
Frequency (kHz)
Frequency (Hz)
Frequency (MHz)
(H/V)
640 X 480
35.000
66.667
30.240
-/-
832 X 624
49.726
74.551
49.500
+/+
640 X 480
31.496
59.940
25.175
-/-
720 X 400
31.469
70.087
28.322
-/-
640 X 480
37.861
72.809
31.500
-/-
640 X 480
37.500
75.000
31.500
-/-
640 X 480
43.269
85.008
36.000
-/-
800 X 600
35.156
56.250
36.000
+/-
800 X 600
37.879
60.317
40.000
+/+
800 X 600
48.077
72.188
50.000
+/+
800 X 600
46.875
75.000
49.500
+/+
800 X 600
53.674
85.061
56.250
-/-
1024 X 768
48.363
60.004
65.000
-/-
1024 X 768
56.476
70.069
75.000
-/-
1024 X 768
60.023
75.029
78.750
+/+
1024 X 768
68.677
84.997
94.500
+/+
1280 X 768
47.700
60.000
80.136
-/+
English-57
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 58
Maintenance of Your Television
To avoid risk of electric shock, do not disassemble the TV cabinet.
Users must not service the TV.
User maintenance is restricted to cleaning, as explained below:
Unplug the television from the power outlet before cleaning.
◆ When you clean the TFT-LCD and the external panel, please apply the recommended small
amount of cleaner, using a soft, dry cloth to polish it.
Do not force your television screen, scrubbing it only softly.
The use of excessive force can result in stains on the screen.
◆ Never use flammable cleaning material to clean your television or any other electrical
apparatus.
English-58
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 59
How to connect the cables and stand base
Colors may vary depending on the model you purchase.
1
Remove the cover as shown in
the picture.
3
Replace the cover.
2
Connect the cables as shown in
the picture.
Attach the stand to the
TV set as shown in the picture.
Note : The curved side of the stand base should be
placed at the back of the TV set as shown in
the above figure.
4
Do NOT lift the TV set by the stand.
The stand is not screwed to the TV set and
lifting the set by the stand may cause injury.
English-59
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 60
Installing the Wall Mount Kit (Sold separately)
This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
1
Connect the hinge to the wall mount bracket.
2
Secure the bracket to the wall.
Use (a) holes to attach the VESA mount.
Use (b) holes to attach the wall mount.
English-60
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 61
Installing the Wall Mount Kit (Sold separately)
3
Remove the base from the TV set.
4
Mount the TV on the wall mount bracket.
Colors may vary depending on the model you purchase.
Holder-Wall : 1EA
Holder-Ass'y : 1EA
Rubber : 4EA
Holder-LCD L/R : 2EA
Screw FH 4 x 8 : 10EA
# The wall mount bracket is sold separately.
Screw BH 4 x 25 : 4EA
Anchor : 4EA
English-61
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 62
Wiring the Mains Power Supply Plug (UK Only)
◆ IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse
is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same
rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable.
If a replacement fuse cover is required, it must be of the same color as the pin face of the plug. Replacement
covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the
cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead
or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse
and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock
hazard from the bared flexible cord.
◆ IMPORTANT
The wires in the mains lead are colored in accordance with the following code:
BLUE - NEUTRAL
BROWN - LIVE
As these colors may not correspond to the colored markings identifying the terminals in your plug,
proceed as follows:
The wire colored BLUE must be connected to the terminal marked with the letter N or colored BLUE or BLACK.
The wire colored BROWN must be connected to the terminal marked with the letter L or colored BROWN or RED.
WARNING:
English-62
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED
WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLORED GREEN OR GREEN
AND YELLOW.
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 63
Memo
English-63
04-BN68-00437D-01Eng
2/9/04 3:25 AM
Page 64
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
ELECTRONICS
Download PDF

advertising