Samsung | HG32ED470SK | Samsung SMART Hospitality Display 32HD450S Benutzerhandbuch

450S/470S
LED TV
Installation manual
imagine the possibilities
Thank you for purchasing this Samsung
product. To receive more complete service,
please register your product at
www.samsung.com/register
Model
Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.
Instruction
This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer
controlled system for hotels and other hospitality businesses.
Interactive: When the TV is powered-up initially, it sends a command to identify the SBB/STB. If identified, the TV switches to ONLINE mode
and full control is through the SBB/STB. (Only for HD470S)
If the TV is in ONLINE mode, it stops receiving IR (Samsung remote) commands and acts according to the interface protocol.
Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operations.
Operational Modes
When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states:
yy ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This prevents
guests from trying to cheat the system by disconnecting the SBB/STB.
Hotel Mode On
Hotel TV
SBB/STB Online if
one success within
10 attempts
Stand-alone
Mode
SBB/STB
Online-10
consecutive fails
Power
ON
SBB/STB
StatusAttempt
every
2secs
Online Mode
Poll Rate 20/sec
To set the details for Stand-alone or interactive mode, refer to pages 19-24(Setting the hotel option data : Stand-alone mode and Interactive
mode)
yy Some operations may be restricted to prevents guests from "cheating" the TV system.
yy No main menu (Interactive mode) or Channel Menu, Plug & Play in Main Menu (Stand-Alone mode)
yy Limited Volume and Panel key lock or unlock
Still image warning
Avoid displaying still images (like jpeg picture files) or still image elements (like TV Programme such as TV Programmeme logos, the panorama
or 4:3 image format, stock or news bars at the bottom of the screen etc.) on the screen. Constantly displaying still pictures can cause uneven
wear of the screen phosphor, which will affect the image quality. To reduce risk of this effect, please follow the recommendations below:
yy Avoid displaying the same TV channel for long periods.
yy Always try do display any image over the full screen, use the TV set picture format menu for the best possible match.
yy Reduce the brightness and contrast values to the minimum require values to achieve the desired picture quality. Exceeding these values
may speed up the burnout process.
yy Frequently use all TV features designed to reduce image retention and screen burnout, refer to the appropriate user manual section for
more details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
yy If you use parts provided by other manufacturers, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Contents
yy Operational Modes................................................................................................................................... 2
yy Still image warning.................................................................................................................................... 2
yy Securing the Installation Space................................................................................................................. 2
yy Accessories.............................................................................................................................................. 4
yy Installing the LED TV Stand....................................................................................................................... 4
yy Viewing the Connection Panel................................................................................................................... 5
yy Using the TV's Controller (Panel Key)........................................................................................................ 10
yy Viewing the Remote Control...................................................................................................................... 11
yy Connecting the TV with SBB (Only for HD470S)........................................................................................ 13
yy Connecting the MediaHub HD (Only for HD470S)..................................................................................... 16
yy Connecting the RJP (Remote Jack Pack) (Only for HD470S)..................................................................... 17
yy Setting the Hotel Option Data................................................................................................................... 19
yy Installing the Wall Mount........................................................................................................................... 48
yy Securing the TV to the Wall....................................................................................................................... 49
yy Anti-theft Kensington Lock........................................................................................................................ 49
yy Specifications........................................................................................................................................... 50
English
3
ENGLISH
yy Instruction................................................................................................................................................. 2
Accessories
✎✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎✎ The items’ colours and shapes may vary depending on the model.
yy
yy
yy
yy
Remote Control & Batteries (AAA x 2)
Power Cord / Data Cable
Safety Guide (Not available in some locations)
Wall mount Adapter
yy
yy
yy
yy
Quick Setup Guide
Guide Stand
Screws
Stand
✎✎ The stand and stand screws may not be included depending on the model.
✎✎ The Data Cable may not be included depending on the SI Vendor.
Installing the LED TV Stand
Stand Components
When installing the stand, use the provided components and parts.
A
B
Stand
1
(M4 X L12) (2EA)
M4 X L12 (4EA)
Screws
2
(M4 X L12) (2EA)
3
✎✎ Make sure to distinguish between the front and back of the Stand and Stand Guide when assembling them.
✎✎ Make sure that at least two people lift and move the TV.
4
English
Viewing the Connection Panel
9
HG32ED470S
DATA
EXT (RGB)
HP-ID
RJP
COMMON
INTERFACE
2
USB
(5V 0.5A) /CLONING
1
87 6
HDMI IN
(ARC)
ANT IN
3
4
5
HG32AD470S
0
USB
(5V 0.5A) /CLONING
1
8 7 6
DATA
AV IN
HP-ID
VIDEO
AUDIO
RJP
HDMI IN
(ARC)
ANT IN
3
4
5
English
5
HG32ED450S
9
EXT (RGB)
HP-ID
RJP
COMMON
INTERFACE
2
USB
(5V 0.5A) /CLONING
1
8 6
HDMI IN
ANT IN
3
4
0
8 6
USB
(5V 0.5A) /CLONING
1
5
AV IN
HP-ID
VIDEO
AUDIO
RJP
HDMI IN
ANT IN
3
4
6
English
5
HG32AD450S
(Except CHINA)
✎✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
✎✎ When connecting an external device, match the colour of the connection terminal to the cable.
1USB (5V 0.5A) / CLONING
–– Connector for software upgrades and Media Play, etc.
–– Service connection.
–– USB CLONING support 2.0 Standard only.
2COMMON INTERFACE
3ANT IN
–– To view television channels correctly, the TV must receive a signal from one of the following sources:
–– An outdoor antenna / A cable television system
4HDMI IN: Connects to the HDMI jack of a device with an HDMI output.
✎✎ No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video.
✎✎ Use the HDMI IN (DVI) jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio.
5RJP: This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional
modules to improve device use and convenience.
6HEADPHONE JACK: Headphones may be connected to the headphone jack on your TV. While the headphones are
connected, the sound from the built-in speakers is disabled.
7DATA
–– Used to support data communication between the TV and the SBB.
–– Connects using RJ-12 TV type plugs.
8HP-ID: Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box.
See page 15. When connecting Headphone to Headphone Box, it works same as Headphone function.
9EXT (RGB)
–– In Ext. mode, DTV Out supports MPEG SD Video and Audio only.
0AV IN
–– Connects the Component video / audio.
–– Connect the component video cables (optional) to the component jacks ("PR", "PB", "Y") at the back of your TV
and the other ends to the corresponding component video out jacks on the DVD.
–– If you wish to connect both the Set-Top Box and the DVD player, you should connect the Set-Top Box to the DVD
Player and connect the DVD Player to the component jacks ("PR", "PB", "Y") on your TV.
–– The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
–– Connect the RCA audio cables (optional) to [R - AUDIO - L] at the back of the TV set and the other ends to the
corresponding audio out jacks on the DVD Player.
English
7
Display Modes
You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the
resolution you choose.
After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is 1920
x 1080 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution properly,
referring to the user guide of the computer or its graphic card.
The resolutions in the table are recommended.
✎✎ Optimal resolution is 1366 X 768 @ 60 Hz.
Display Mode
8
Display Format
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM
720 x 400
70Hz
31.469
70.087
28.322
-/+
VESA DMT
640 x 480
60Hz
31.469
59.940
25.175
-/-
MAC
640 x 480
67Hz
35.000
66.667
30.240
-/-
VESA DMT
640 x 480
72Hz
37.861
72.809
31.500
-/-
VESA DMT
640 x 480
75Hz
37.500
75.000
31.500
-/-
VESA DMT
800 x 600
60Hz
37.879
60.317
40.000
+/+
VESA DMT
800 x 600
72Hz
48.077
72.188
50.000
+/+
VESA DMT
800 x 600
75Hz
46.875
75.000
49.500
+/+
MAC
832 x 624
75Hz
49.726
74.551
57.284
-/-
VESA DMT
1024 x 768
60Hz
48.363
60.004
65.000
-/-
VESA DMT
1024 x 768
70Hz
56.476
70.069
75.000
-/-
VESA DMT
1024 x 768
75Hz
60.023
75.029
78.750
+/+
VESA DMT
1280 x 720
60Hz
45.000
60.000
74.250
+/+
VESA DMT
1366 x 768
60Hz
47.712
59.790
85.500
+/+
English
✎✎ Optimal resolution is 1920 X 1080 @ 60 Hz.
Display Mode
Display Format
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM
720 x 400
70Hz
31.469
70.087
28.322
-/+
VESA DMT
640 x 480
60Hz
31.469
59.940
25.175
-/-
MAC
640 x 480
67Hz
35.000
66.667
30.240
-/-
VESA DMT
640 x 480
72Hz
37.861
72.809
31.500
-/-
VESA DMT
640 x 480
75Hz
37.500
75.000
31.500
-/-
VESA DMT
800 x 600
60Hz
37.879
60.317
40.000
+/+
VESA DMT
800 x 600
72Hz
48.077
72.188
50.000
+/+
VESA DMT
800 x 600
75Hz
46.875
75.000
49.500
+/+
MAC
832 x 624
75Hz
49.726
74.551
57.284
-/-
VESA DMT
1024 x 768
60Hz
48.363
60.004
65.000
-/-
VESA DMT
1024 x 768
70Hz
56.476
70.069
75.000
-/-
VESA DMT
1024 x 768
75Hz
60.023
75.029
78.750
+/+
VESA DMT
1152 x 864
75Hz
67.500
75.000
108.000
+/+
MAC
1152 x 870
75Hz
68.681
75.062
100.000
-/-
VESA DMT
1280 x 720
60Hz
45.000
60.000
74.250
+/+
VESA DMT
1280 x 800
60Hz
49.702
59.810
83.500
-/+
VESA DMT
1280 x 1024
60Hz
63.981
60.020
108.000
+/+
VESA DMT
1280 x 1024
75Hz
79.976
75.025
135.000
+/+
VESA DMT
1366 x 768
60Hz
47.712
59.790
85.500
+/+
VESA DMT
1440 x 900
60Hz
55.935
59.887
106.500
-/+
VESA DMT
1600 x 900RB
60Hz
60.000
60.000
108.000
+/+
VESA DMT
1680 x 1050
60Hz
65.290
59.954
146.250
-/+
VESA DMT
1920 x 1080
60Hz
67.500
60.000
148.500
+/+
✎✎ The interlace mode is not supported.
✎✎ The set might operate abnormally if a non-standard video format is selected.
✎✎ Separate and Composite modes are supported. SOG is not supported.
English
9
Using the TV's Controller (Panel Key)
Turn on the TV using the P button on the remote control or TV panel.
✎✎ The TV's Controller at the right bottom of the TV, lets you control the TV without the remote control.
✎✎ If you press it first, the control menu appears. You can select the function by pressing and holding the TV's controller.
✎✎ The product colour and shape may vary depending on the model.
✎✎ With the TV’s Controller, you cannot perform other operations except for turning the TV on or off, changing the channel,
adjusting the volume, and switching the input source.
: Turns the TV on or off.
Press: Move
Press & Hold: Select
Control Menu
/
: Changes channels.
/
: Adjusts the volume.
: Displays and selects the available video sources.
Remote control sensor/TV Controller
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small
amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
10
English
Viewing the Remote Control
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually
impaired persons.
Display and select available video
sources.
Turns the TV on and off.
Have direct access to channels.
Alternately selects Teletext, Double
or Mix.
GUIDE
TTX/MIX
Electronic Programme Guide (EPG)
display.
Cut off the sound temporarily.
Adjust the volume.
Change channels.
CH LIST
Display channel list on the screen.
Swich to the HOME Screen.
T
HOME
Display the main on-screen menu.
CONTENT
CLOCK
Quickly select frequently used
functions.
Select on-screen menu items and
change menu values.
Return to the previous menu.
Buttons in the Channel list,
Contents Home menu, etc.
ALARM: Enter the hour you want
the TV to turn on. (HD450S is not
supported)
W: Turns the 3D image on or off. (
Not available )
SUBT.: Displays digital subtitles.
View the Contents Home.
Press to display information on the
TV screen.
CLOCK: When you press INFO key
in standby mode, TV screen displays
the time.
Exit the menu.
A
ALARM
B
C
D
SUBT.
Use these buttons in the Contents
Home.
Installing batteries (Battery size: AAA)
Rear of the Remote
✎✎ NOTE
yy Use the remote control within 23 feet of the TV.
yy Bright light may affect the performance of the remote
control. Avoid using nearby special fluorescent light or
neon signs.
yy The colour and shape may vary depending on the
model.
✎✎ After you have intalled the batteries, use a screwdriver to
yy Remote control button '3D' is not supported. When
screw in the screw that holds the battey cover closed.
pressing these buttons, the TV unit does not respond.
English
11
Using the Sports Mode
Sports Mode t
✎✎ MENU m → Applications → Sports Mode → ENTER E
This mode provides optimized condition for watching sports games.
yy a (Zoom): Pause playback and divide the picture into 9 parts. Select a part to zoom it in. Press this button again to
resume.
✎✎ When the Sports Mode is on, the picture and sound modes are set to Stadium automatically.
✎✎ If you turn the TV off while watching Sports Mode, the Sports Mode will be disable.
✎✎ When the Data Service is running, the Zoom is not available.
12
English
Connecting the TV with SBB (Only for HD470S)
TV Rear Panel
ETH MODEM
DATA
Data Cable
EXT (RGB)
HP-ID
RJP
HDMI IN
(ARC)
1. Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable.
✎✎ Use data communication.
English
13
List of Vendors and Compatible Data Cables Supplied with the TV
yy Confirm that you are using the correct data cable for your vendor. Refer to the code label on the data cables.
✎✎ Operation Specification of Data Cable(RJ12) : RS232
14
English
HP-ID
An additional Headphone Box can be installed on a bed or business desk for added convenience. The installation
procedures are given below.
yy Detailed Drawing of the Headphone Box.
TV Rear Panel
HEADPHON BOX
A
Headphone Box
HP-ID
Shield wire
TV Headphones jack
Red Wire (Audio-R)
Whitewire (Audio-L)
Red wire + White wire
Shield Wire
TV HP-ID jack
<Headphone Box>
English
15
Connecting the MediaHub HD (Only for HD470S)
Output to any external source connected to MediaHub HD on the hotel desk.
MediaHub HD Rear
HDMI
USB
TV Rear Panel
RS/232
USB
(5V 0.5A) /CLONING
DATA
EXT (RGB)
HP-ID
COMMON
INTERFACE
RJP
1 RS-232 Data Cable
HDMI IN
(ARC)
2 HDMI cable
ANT IN
1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD.
2. Connect the HDMI IN port of the TV and the HDMI port of the MediaHub HD.
yy MediaHub HD
–– The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB)
and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub
communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external
source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/Inactive
sources. The TV switches to the Active external source.
–– You have to connect the HDMI of the MediaHub to the HDMI IN port of the TV.
–– When the TV is on, connect the TV and the RJP within 10 seconds.
yy Special features
–– PIP
–– Auto Detection
16
English
Connecting the RJP (Remote Jack Pack) (Only for HD470S)
Output to any external source connected to RJP on the hotel desk.
RJP Rear
USB
HDMI
TV Rear Panel
VIDEO AUDIO AUDIO/PC
RS/232
USB
(5V 0.5A) /CLONING
COMMON
INTERFACE
2
DATA
EXT (RGB)
HP-ID
RJP
HDMI IN
(ARC)
1 HDMI cable
ANT IN
1. Connect the HDMI IN port of the TV and the HDMI port of the RJP.
2. Connect the RJP port of the TV and the RS/232 port of the RJP.
✎✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660
(HD Plus).
yy RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio
Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected
from the RJP to the TV. The RJP communicates with the TV via RS232. The Hot Plug & Play function allows hotel guests
to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources. The TV will switch to the Active external source according to the priority set by the User.
✎✎ You can select HDMI IN and AV IN for connecting the RJP.
✎✎ When the TV is on, connect the TV and the RJP within 10 seconds.
English
17
yy The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10
seconds. All LEDs blink 5 times to acknowledge that this has been finished.
yy The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The
LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart. If
the guest then touches another source button, the TV will change to the selected source and the corresponding LED will
be lit.
yy After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the TV
and the RJP.
yy The following table shows the approximate time in seconds to switch from the TV to the input source, based on the
priority.
✎✎ Scenario 1: When no inputs are connected.
Source
To Connect
AV
HDMI
2 Sec
3.9 Sec
✎✎ Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected.
Source
Disconnect
To Connect
Total
AV
PC
HDMI
4.5 Sec
0.7 Sec
3.9 Sec
2 Sec
0.7 Sec
3.9 Sec
6.5 Sec
1.4 Sec
7.8 Sec
✎✎ E.g. If the RJP has all its live sources AV and HDMI connected, AV is viewed as the highest priority. If the RJP is in
HDMI mode, and a guest removes and reconnects the AV, the minimum time required to switch to the AV is 6.5
seconds.
yy To connect audio (Ipod or Mp3), Music mode should be ON and Jack Ident detect should be OFF.
yy A/V, PC and HDMI input sources are supported.
18
English
Setting the Hotel Option Data
To Enter: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.)
To Exit from this menu : power off and turn on again.
The Hotel Option Data of HD470S
No
Hotel TV Function
Category
Item
initial value
1
Hospitality Mode
Hospitality Mode
Standalone
2
SI Vendor
SI Vendor
OFF
3
4
Description
Select Hospitality mode.
yy Interactive mode : TV works with an SI STB or SBB.
yy Stand-alone mode : TV works alone, without an SI STB or SBB.
yy Interactive mode : Samsung /2M/ Locatel / VDA / VDA-S / Acentic
yy Stand-alone mode : OFF /Movielink/Swisscom/ Smoovie / SSCP
Set the default values that will be applied when the TV is turned on.
yy User Defined : Lets you set Power On Channel and Channel Type
manually. See Power On Channel Number and Channel Type below.
yy Last Saved : If you select this item, when the TV is turned on, it
displays the channel it was displaying when it was turned off.
Power On Channel
Last Saved
Power On Channel
Num
…
When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type
…
yy Select channel band : ATV (analog air band), DTV (digital air band),
CATV(analog cable band), CDTV (digital cable band)
Power On Volume
Last Saved
yy User Defined : Lets you set the Power On Volume manually. See
Power On Volume Number below.
yy Last Saved : When the TV is turned on, it returns to the volume that
had been set when the power had been turned off.
Power On Volume Num
…
The TV turns on with this Volume Level.
Min Volume
0
The minimum Volume Level the user can set in Stand Alone
Hospitality mode.
Max Volume
100
The maximum Volume Level the user can set.
Power On Source
TV
Select the input source the TV displays when turns on.
Power On
Determines the TV's state when power returns after a power failure or
after you have unplugged the TV and then plugged it in again.
yy Last Option : Returns to its last Power state. If it was in Stand-by, it
returns to Stand-by. If it was on, it turns on.
yy Power On : When the power returns, the TV turns on.
yy Standby : When the power returns, the TV enters the Standby
mode.
Power On Option
Last Option
Channel Setup
…
Gives you direct, immediate access to some of the Channel menu
functions on the user Channel menu such as Auto Tuning, Manual
Tuning, Antenna setting, etc.
…
The Channel Editor lets you edit the channels stored in the TV's
memory. Using Channel Editor you can:
yy Change the channel numbers and names, and sort the channels in
your desired channel number order.
yy Apply the video mute to channels you select. The video mute blanks
out the video from a channel and outputs only the sound while
displaying a speaker icon on the screen. The Channel Editor also
lets you view information about each channel easily, without your
having to display each channel directly.
Channel
Channel Editor
English
19
No
Hotel TV Function
Category
Item
ON
yy This Feature enables showing/browsing all antenna type (Air/Cable
or Satellite) channels at the same time.
yy On: When ON, guests can access the complete Channel Map
irrespective of the selected antenna type. The Channel list will also
populate Air as well Cable type channels.
yy Off: When OFF, guest can access the Channel Map corresponding
to the selected antenna type [AIR/CABLE or Satellite] only. The
Channel list/Editor will only show the selected antenna type
channels.
OFF
yy On : Check the DTV Programme channel number. (the DTV channel
editor is inaccessible)
yy Off: Do not check the DTV Programme channel number. (the DTV
channel editor is accessible, but additional channel Programme
number update is not supported)
Channel Rescan
Message
ON
When there is a mismatch between the data in the channel map and
the transmitted data , the TV autotunes the channels to restore the
data/parameters in the channel map.
yy On: When Channel Rescan Message is ON, The OSD showing that
the channels are being rescanned will be displayed to Hotel Guests.
yy Off: A Hotel Admin can turn the Channel Rescan Message OFF,
if the rescan message OSD should not to be displayed to Hotel
Guests.
Pan Euro MHEG
OFF
yy Off: If Pan EURO MHEG is set to Off, MHEG runs according to the
existing product specifications.
yy ON: If Pan EURO MHEG is set to On, MHEG is ON regardless of the
product specifications or region.
My Channel
OFF
Enable or disable the Mychannel feature.
Genre Editor
…
Mixed Channel Map
Dynamic SI
4
5
Channel
Subtitle Auto On
OFF
TTX Widescreen Mode
OFF
yy On: TTX information widescreen display.
yy Off: TTX information normally display.
Picture Menu Lock
OFF
Enable or disable the Picture Menu.
Menu Display
ON
yy On : The Main Menu is displayed.
yy Off : The Main Menu is not displayed.
Tools Display
ON
yy On : The Tools Menu is displayed.
yy Off: The Tools Menu is not displayed.
Channel Menu Display
OFF
yy On : The Channel Menu is displayed.
yy Off: The Channel Menu is not displayed.
Menu OSD
Panel Button Lock
Unlock
Home Menu Display
ON
Home Menu Auto Start
English
Edit the genre for channels. (Available when Mychannel is On)
This function turns the function On/Off that automatically turns on the
subtitles in a specific country. This function is supported for Hotel TVs
that are ready to receive DVB broadcasts that is heading to Europe.
This function is related to France’s subtitle specification. The rest of
the countries’ subtitles function according to the appropriate country
specifications regardless of the Subtitle Auto On function.
yy On: When the Subtitle Auto On function is ON, it follows France’s
subtitle specifications.
yy Off: When the Subtitle Auto On function is OFF, it does not follow
France’s subtitle specifications.
Home Menu Editor
20
Description
initial value
Turning the front panel (local key) operations on/off.
yy Unlock : Unlocks all panel keys.
yy Lock : Locks all panel keys.
yy OnlyPower : Locks all panel keys except the Power panel key.
yy Menu/Source : Locks the Menu and Source panel keys.
OFF:The Home Menu is not displayed.
ON:The Home Menu is displayed.
Edit Home Menu.
ON
ON:The Home Menu is Auto Start.
OFF:The Home Menu is not Auto Start.
No
6
7
8
9
10
11
Hotel TV Function
Category
Clock
Item
External Source
HP Management
Eco Solution
Select the clock type (Off/SW Clock/Ext. Clock)
yy Off: No clock options of the Hotel options will work.
yy SW Clock: Only the SW clock will work.
yy Ext. Clock: LED Clock related item work as Dimming/Clock test/
Time Format.
Clock Type
OFF
Local Time
Manual
Select the way to update clock data.
Use clock data from a DTV channel to set the clock automatically or
set the clock manually when the TV is in stand-alone mode.
Timer Type
Wakeup
Wakeup: Wake Up Timer is displayed.
On/Off: On Timer and Off Timer are displayed.
Tiime Channel Type
…
Use clock data from which DTV channel to set the clock.
Time Channel Num
…
DTV channel Number.
Music Mode AV
OFF
To get music output from an mp3/audio player through an AV Input
Source. When on, you can hear sound from the player through the TV
even there is no video signal. The TV’s backlight, however, remains
on. And add a video signal,it works normally.
Music Mode PC
OFF
To get music output from an mp3/audio player through a PC Input
Source. When on, you can hear sound from the player through the TV
even there is no video signal. The TV’s backlight, however, remains
on. And add a video signal,it works normally.
Music Mode Backlight
OFF
Backlight On/Off option in Music mode to save energy.
Priority AV
1
If the jack priority is set, the corresponding source is automatically set
when a jack is inserted according to the jack priority.
Priority HDMI
3
If the jack priority is set, the corresponding source is automatically set
when a jack is inserted according to the jack priority.
AV Option
AV
Select RJP AV Source (Source selection depends on Model).
HDMI Option
HDMI 1
Select which HDMI source of the TV is connected to the RJP jack.
(HDMI1/HDMI2/HDMI3)
USB Pop-up Screen
Default
When a USB device is connected to the TV :
yy Default : A popup window appears.
yy Automatic : Opens the USB contents menu automatically.
yy Disable : Neither the popup window nor the menu appears.
Music Mode
Remote Jack Pack
Description
initial value
External Source Banner
ON
If set to On, the TV displays the External Source Banner (information)
when you change the TV source to another external input, press the
Info key, or turn the TV on.
yy On : The External Source information is displayed on the TV screen.
yy Off : The External Source information is not displayed on the TV
screen.
Auto source
OFF
yy On : When an external input source is connected to the TV, the TV
identifies the input source, and then automatically switches to that
input source.
yy Off : Auto Source function is Off.
Anynet+Return Source
Power On
Src
Select the return TV source after stopping an Anynet+(HDMI-CEC)
connection. (This Function is especially useful for the Guestlink RJP.)
HP Mode
OFF
Default HP Volume
…
Main Speaker
ON
Energy saving
OFF
For the specific situation, pls see the table below.
Adjusts the brightness of the TV to reduce power consumption.
yy Off: Turns off the energy saving function.
yy Low: Sets the TV to low energy saving mode.
yy Medium: Sets the TV to medium energy saving mode.
yy High: Sets the TV to high energy saving mode.
English
21
No
Hotel TV Function
Category
Item
initial value
Welcome Message
OFF
Edit Welcome Message
12
13
14
15
22
Logo/Message
Security
English
Displays a the Welcome Message for 5 seconds when the TV turns
On.
Edits the Welcome Message.
OFF
Turns the Hospitality logo feature On or Off, If On, when the TV is
turned on, the Logo is displayed, before the signal from the initial
source, for the amount of time set in "Logo Display Time".
Hospitality Logo DL
…
Downloads the Hospitality logo. Hospitality logo file requirements:
yy BMP or AVI files only.
yy Max file size : BMP - 960 X 540. AVI - 30MB.
yy The file can only be named samsung.bmp or samsung.avi.
Logo Display Time
…
Hospitality Logo Display Time (3/5/7 seconds).
Clone TV to USB
-
Clone the current TV options to a USB memory device.
Clone USB to TV
-
Clone the saved TV options on a USB memory device to the TV.
Hospitality Logo
Setting Auto Intialize
OFF
When Setting Auto Initialize is set to On, and the power is turned off
and on or the Master Power is turned off and on, the data is restored
to the cloned values. If there is no cloned value, even when the
Setting Auto Initialize is set to On, it will be ignored and the operation
will be the same as that when Setting Auto Initialize is set to Off.
REACH 3.0
OFF
yy ON: Open the REACH 3.0.
yy OFF:Closed the REACH 3.0.
REACH Channel
…
Select SIRCH Update Channel.
Group ID
…
Select the SIRCH Group ID.
Ticker
OFF
REACH Update Time
…
Select the SIRCH update Time. In the SIRCH update time , you have the
option to perform an automatic upgrade at 12:00 AM/PM or at 2:00 AM/
PM. You can perform hourly upgrades at an interval of either 1 hr or 2 hrs.
REACH Update
Immediate
…
yy On : Whenever the TV enters Standby mode, always performs the
SIRCH Update.
yy Off : Only performs the SIRCH Update at the selected SIRCH
Update Time.
Room Number
…
Edit the room number.
REACH Server Version
0000
Password Input
…
Input Password 00000000.
Password Setting
…
Set new Password.
Password Reset
…
Reset Password to 00000000.
Security Mode
…
Security Mode ON or OFF.
USB
…
USB Disable or Enable.
HDMI
…
HDMI Disable or Enable.
TTX Security
…
TTX function Enable or disable.
Cloning
REACH
Solution
Description
yy On: The TICKER contents is displayed.
yy Off: The TICKER contents is not displayed.
Display the version of the SIRCH Clone file currently updated on the TV.
No
Hotel TV Function
Category
Item
Description
initial value
Enter the Self Diagnosis Menu.
16
System
yy Picture Test: Use this to check for picture problems. If the problem
appears in the test picture, select Yes and follow the directions on
the screen.
yy Sound Test: Use the built-in melody sound to check for sound
problems. If the problem occurs during the test, select Yes and
follow the directions on the screen.
Self Diagnosis for TV
…
Self Diagnosis for HTV
…
This lets you check the state of the Variable audio out and the
communication with the SI STB or SBB. If you encounter any
problems in the variable audio out feature or communication with the
SI STB or SBB, please check this items.
SW Update
…
SW USB Update function.
Service Pattern
OFF
Display the Service pattern.
Sound Bar Out
OFF
An external device such as a Samsung Sound Bar can be connected
to the TV via an Anynet Connection and the TV Sound can be
routed to the Sound Bar Device. If the feature is OFF in the Hotel
Factory Menu, this functionality is disabled The main TV Speaker
will be muted while the Sound Bar option is ON and the Speaker is
connected through HDMI.
Contact Samsung
…
Samsung Contact information.
Standby LED
ON
yy On: The Function IR is On when Standby.
yy Off: The Function IR is Off when Standby.
TV reset
…
Factory reset
✎✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional and interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER
contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are only available
in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed in the REACH
server product for more information on operating it.
English
23
HP Mode
Main
Speaker
Mute
ON/OFF
TV Action
ON
ON
OFF
Power ON
ON
ON
OFF
Volume up/down
ON
ON
ON
Mute
ON
ON
ON
volume up/down
ON
ON
OFF
Unmute
Greyed
OFF
OFF
Power ON
Greyed
OFF
OFF
Volume up/down
Greyed
OFF
ON
Greyed
OFF
ON
Greyed
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
OFF
OFF
ON
OFF
ON
ON
OFF
ON
OFF
24
English
Mute
Output
Main Speaker Sound - YES (Last Saved/User defined vol.
level applied)
HP Sound - N/A
Main Speaker - volume level changes as per volume OSD
HP Sound - N/A
Main Speaker - Mute
HP Sound - Yes - Sound level applied from HP Volume level in
Hotel Option Menu.
Main Speaker Sound - No (Mute)
HP - volume level up/down as per current HP volume
Main Speaker Sound - Yes.
HP Sound - N/A
Main Speaker Sound - No (Mute)
HP Sound - YES (HP vol. level from Factory applied)
Main Speaker - Mute
HP - volume level up/down as per current HP volume
Main Speaker - Mute (No Action)
HP - Change to Mute
Main Speaker Sound - No (Mute)
volume up/down
keeping Mute
HP - volume level up/down as per current HP volume
state
Main Speaker Sound - No (Mute)
Unmute
HP - Yes(volume level as per current HP volume)
Power ON
Volume up/down
If HP Management is OFF, forcefully set Main Speaker as OFF.
Mute
volume up/down (If HP management OFF, working is same as Normal HTV
keeping Mute working.)
state
Unmute
Remarks
It is similar to Normal
working except
that Headphone is
connected forcefully
even if Headphone is not
connected physically.
Same as Headphone
Connected/disconnected
case with No HP
Management feature.
The Hotel Option Data of HD450S
No
1
Hotel TV Function
Category
Item
Hospitality Mode
Hospitality Mode
Power On Channel
2
Power On
Select Hospitality Mode.
Standalone yy Interactive mode: TV works with an SI STB or SBB.
yy Standalone mode: TV works alone, without an SI STB or SBB.
Set the default values that will be applied when the TV is turned on.
yy User Defined : Lets you set Power On Channel and Channel Type
Last Saved
manually. See Power On Channel and Channel Type below.
yy Last Saved : If you select this item, when the TV is turned on, it
displays the channel it was displaying when it was turned off.
…
When the TV is turned on, it switches automatically to this channel.
Power On Channel Type
…
yy Select channel band : AIR (analog air band), DTV (digital air band),
CATV (analog cable band), CDTV (digital cable band)
Power On Volume
Last Saved
Power On Volume Num
…
The TV turns on with this Volume Level in Stand Alone Hospitality
mode.
Min Volume
0
The minimum Volume Level the user can set in Stand Alone Hospitality
mode.
Max Volume
100
The maximum Volume Level the user can set in Stand Alone
Hospitality mode.
Power On Source
TV
Select the input source the TV displays when turns on.
yy User Defined : Lets you set the Power On Volume manually. See
Power On Volume below.
yy Last Saved : When the TV is turned on, it returns to the volume that
had been set when the power had been turned off.
Determines the TV's state when power returns after a power failure or
after you have unplugged the TV and then plugged it in again.
yy LAST OPTION : Returns to its last Power state. If it was in Stand-by,
Last Option
it returns to Stand-by. If it was on, it turns on.
yy Power On : When the power returns, the TV turns on.
yy Standby : When the power returns, the TV enters the Standby mode.
…
Gives you direct, immediate access to some of the Channel menu
functions on the user Channel menu such as Auto Program, Antenna
selection, etc.
…
The Channel Editor lets you edit the channels stored in the TV's
memory. Using Channel Editor you can:
yy Change the channel numbers and names, and sort the channels in
your desired channel number order.
yy Apply the video mute to channels you select. The video mute blanks
out the video from a channel and outputs only the sound while
displaying a speaker icon on the screen. The Channel Editor also lets
you view information about each channel easily, without your having
to display each channel directly.
OFF
yy On : Check the DTV Programme channel number. (the DTV channel
editor is inaccessible)
yy Off: Do not check the DTV Programme channel number. (the DTV
channel editor is accessible, but additional channel Programme
number update is not supported)
Channel Rescan
Message
ON
When there is a mismatch between the data in the channel map and
the transmitted data , the TV autotunes the channels to restore the
data/parameters in the channel map.
yy On: When Channel Rescan Message is ON, The OSD showing that
the channels are being rescanned will be displayed to Hotel Guests.
yy Off: A Hotel Admin can turn the Channel Rescan Message OFF, if the
rescan message OSD should not to be displayed to Hotel Guests.
Pan Euro MHEG
OFF
yy Off: If Pan EURO MHEG is set to Off, MHEG runs according to the
existing product specifications.
yy ON: If Pan EURO MHEG is set to On, MHEG is ON regardless of the
product specifications or region.
TTX Widescreen Mode
OFF
yy On: TTX information widescreen display.
yy Off: TTX information normally display.
Channel Setup
Channel Editor
Channel
Description
Power On Channel Num
Power On Option
3
initial value
Dynamic SI
English
25
No
4
Hotel TV Function
Category
initial value
Picture Menu Lock
OFF
Enable or disable the Picture Menu.
Menu Display
ON
yy On : The Main Menu is displayed.
yy Off : The Main Menu is not displayed.
Tools Display
ON
yy On : The Tools Menu is displayed.
yy Off: The Tools Menu is not displayed.
Channel Menu Display
OFF
yy On : The Channel Menu is displayed.
yy Off: The Channel Menu is not displayed.
Menu OSD
Panel Button Lock
Unlock
Home Menu Display
ON
Home Menu Editor
5
6
Music Mode
Remote Jack Pack
8
9
26
External Source
HP Management
Eco Solution
English
Turning the front panel (local key) operations on/off.
yy Unlock : Unlocks all panel keys.
yy Lock : Locks all panel keys.
yy OnlyPower : Locks all panel keys except the Power panel key.
yy Menu/Source : Locks the Menu and Source panel keys.
OFF: The Home Menu is not displayed.
ON: The Home Menu is displayed.
Edit Home Menu.
Home Menu Auto Start
ON
ON: The Home Menu is Auto Start.
OFF: The Home Menu is not Auto Start.
Music Mode AV
OFF
To get music output from an mp3/audio player through an AV Input
Source. When on, you can hear sound from the player through the TV
even there is no video signal. The TV’s backlight, however, remains on.
And add a video signal, it works normally.
Music Mode Backlight
OFF
Backlight On/Off option in Music mode to save energy.
Priority AV
1
If the jack priority is set, the corresponding source is automatically set
when a jack is inserted according to the jack priority.
Priority HDMI
3
If the jack priority is set, the corresponding source is automatically set
when a jack is inserted according to the jack priority.
AV Option
AV
Select RJP AV Source (Source selection depends on Model).
HDMI Option
HDMI
Select which HDMI source of the TV is connected to the RJP jack.
(HDMI1/ HDMI2/HDMI3)
Default
When a USB device is connected to the TV :
yy Default : A popup window appears.
yy Automatic : Opens the USB contents menu automatically.
yy Disable : Neither the popup window nor the menu appears.
USB Pop-up Screen
7
Description
Item
ON
If set to On, the TV displays the External Source Banner (information)
when you change the TV source to another external input, press the
Info key, or turn the TV on.
yy On : The External Source information is displayed on the TV screen.
yy Off : The External Source information is not displayed on the TV
screen.
Auto source
OFF
yy On : When an external input source is connected to the TV, the TV
identifies the input source, and then automatically switches to that
input source.
yy Off : Auto Source function is Off.
Anynet+Return Source
Power On
Src
HP Mode
OFF
External Source Banner
Default HP Volume
…
Main Speaker
ON
Energy saving
OFF
Select the return TV source after stopping an Anynet+(HDMI-CEC)
connection. (This fuction is especially useful for the Guestlink RJP.)
For the specific situation, pls see the table above.
Adjusts the brightness of the TV to reduce power consumption.
yy Off: Turns off the energy saving function.
yy Low: Sets the TV to low energy saving mode.
yy Medium: Sets the TV to medium energy saving mode.
yy High: Sets the TV to high energy saving mode.
No
10
Hotel TV Function
Category
initial value
Clone TV to USB
-
Clone the current TV options to a USB memory device.
Clone USB to TV
-
Clone the saved TV options on a USB memory device to the TV.
OFF
When Setting Auto Initialize is set to On, and the power is turned off
and on or the Master Power is turned off and on, the data is restored
to the cloned values. If there is no cloned value, even when the Setting
Auto Initialize is set to On, it will be ignored and the operation will be
the same as that when Setting Auto Initialize is set to Off.
…
Enter Self Diagnosis Menu.
–– Picture Test: Use to check for picture problems. If the problem
appears in the test picture, select Yes and follow the directions on
the screen.
–– Sound Test: Use the built-in melody sound to check for sound
problems. If the problem occurs during the test, select Yes and
follow the directions on the screen.
SW Update
…
SW USB Update function.
Service Pattern
OFF
Same function with SVC Service Pattern.
Sound Bar Out
OFF
An external device such as a Samsung Sound Bar can be connected
to the TV via an Anynet Connection and the TV Sound can be routed
to the Sound Bar Device. If the feature is OFF in the Hotel Factory
Menu, this functionality is disabled The main TV Speaker will be muted
while the Sound Bar option is ON and the Speaker is connected
through HDMI.
Contact Samsung
…
Samsung Contact information.
Standby LED
ON
yy On: The Function IR is On when Standby.
yy Off: The Function IR is Off when Standby.
TV reset
…
Factory reset
Cloning
Setting Auto Intialize
Self Diagnosis for TV
11
Description
Item
System
English
27
Welcome Message (Only for HD470S)
The Welcome message is a feature that allows you to display customized message on the TV every time the TV is turned on
by a guest in a hotel room.
–– The Welcome message settings are placed in the Hotel Option Menu.
–– The Welcome message should be ON in order for the message to be displayed when the power is turned on.
Standalone
Hospitality Mode
SIHospitality
Vendor Mode
SI Vendor
Power
On
Security
System
OFF
Standalone
OFF
Power On
Channel
Channel
Menu OSD
Menu OSD
Clock
Clock
Welcome Message
Remote
RemoteJack
JackPack
Pack
ON
Edit Welcome Message
r
Music Mode
Music Mode
Hospitality Logo
ExternalSource
Source
External
ON
Hospitality Logo DL
...
Logo Display Time
...
Eco
Solution
HP
Management
Logo/Message
Eco Solution
Cloning
Logo/Message
REACH Solution
Cloning
Security
REACH
SystemSolution
<Depending on model and region, some menu items may not exist>
–– The Welcome message can be up to 25 characters and can be edited in the Hotel Service menu.
–– The following is the list of characters supported for the Welcome message.
✎✎ Only the capital letters A to Z are allowed.
–– The Welcome message can be edited using the navigation, colour & enter keys of the remote control in the “Edit
Welcome Message” OSD.
Edit Welcome Message
W
E
L
C
O
M
E
_
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Move
Enter
A
Move to left
B
Move to Right
C
Leave Black
D
Done
Return
–– The Welcome message and hotel logo cannot be active at the same time.
28
English
Hotel Logo (Only for HD470S)
The Hospitality Logo function displays the Hotel's logo when the TV is powered on.
–– The Hospitality Logo settings are in the Hospitality mode menus.
–– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
–– If there is a logo image stored in the memory and the Hospitality Logo option is on, the Hospitality logo is displayed
when the TV is turned on.
–– The Hospitality logo is not displayed when the Hospitality Logo option is off, even if the logo image has been
loaded onto the TV.
Hospitality Mode
SIHospitality
Vendor Mode
SI Vendor
Power
On
Standalone
Security
System
OFF
Standalone
OFF
Power On
Channel
Channel
Menu OSD
Menu OSD
Clock
Clock
Music Mode
Music Mode
Remote
RemoteJack
JackPack
Pack
ExternalSource
Source
External
Welcome Message
r
OFF
Edit Welcome Message
Hospitality Logo
BMP
Hospitality Logo DL
Logo Display Time
5 Second
Eco
Solution
HP
Management
Logo/Message
Eco Solution
Cloning
Logo/Message
REACH Solution
Cloning
Security
REACH
SystemSolution
<Depending on model and region, some menu items may not exist>
yy Hospitality Logo
–– This option lets you choose whether the Hospitality Logo image is displayed or not.
–– The Initial value is OFF.
–– Can be set to OFF or ON.
–– When set to ON, the Logo Download and Logo Time Display menu items become accessible.
yy Hospitality Logo DL
–– This option lets you download the logo image to the TV’s memory from a USB device.
–– The Wait message appears while the image is being copied to the TV.
–– The Completed message appears when the copy operation has finished successfully.
–– The Failed message appears when the copy operation was unsuccessful.
–– The No USB device message appears if no USB device is connected.
–– The No File message appears if there is no file to copy on the USB device or if the file is in the wrong format (must
be a BMP file). If the No File message appears and there is a logo file on the USB device, check the file format.
yy Logo File Format
–– The TV only supports the BMP and AVI formats.
–– The file name must be samsung.bmp or samsung.avi.
–– The maximum resolution of the BMP format is 1280 x 720.
–– The maximum file size of the AVI format is 30MB.
–– The TV does not change the size or scale of the image.
English
29
Cloning
USB Cloning is a function to download user configured settings (Picture, Sound, Input,
Channel, Setup, and Hotel Setup) from one TV set and upload the same settings to other
TV sets.
All user-defined settings from the TV (Master Set) can be copied to the USB device.
(
(ARC)
)
(5V 0.5A)
/ CLONING
–– USB Cloning support 2.0 Standard only.
yy Cloning from TV to USB: This is an operation that copies the stored data from a specific
area of the TV EEPROM to the USB device.
1. Insert a USB drive into the USB port on the back of the TV.
2. Enter the Hotel Options by pressing these buttons in the following order.
MUTE → 1 → 1 → 9 → ENTER
3. Press the ▲ or ▼ button to select “Clone TV to USB”, then press the ENTER
button.
4. The message “Clone TV to USB” is displayed, then press the ENTER button.
5. You can check the status of the USB cloning operation.
yy In Progress: While copying data to the USB device.
yy Completed: The copy operation was finished successfully.
yy Failed: The copy operation was not finished successfully.
yy No USB: No USB device connected.
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
Logo/Message
Cloning
d
Clone TV to USB
yy Clone USB to TV: This is an operation that downloads the stored data to the USB device
to the TV set.
1. Insert a USB drive into the USB port at the back of the TV.
Clone USB to TV
Setting Auto Initialize
OFF
2. Enter the Hotel Options by pressing these buttons in the following order.
MUTE → 1 → 1 → 9 → ENTER
3. Press the ▲ or ▼ button to select “Clone USB to TV”, then press the ENTER button.
4. The message “Clone USB to TV” is displayed, then press the ENTER button.
5. You can check the status of the USB cloning operation
yy In Progress: While copying data to the USB device.
yy Completed: The copy operation was finished successfully.
yy Failed: The copy operation was not finished successfully.
yy No USB: No USB device connected.
yy No File: There is no file to copy on the USB device.
✎✎ Activate copying from USB to TV by pressing ENTER key for 5 seconds.
✎✎ The CLONE function only supports the same model series. (It does not work properly for different model series.)
For fast, instant cloning during installation,
insert a USB drive with master settings from the first TV and press the Enter key for 5 seconds.
30
English
Plug & Play
The Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture
mode Setup when the TV starts for the first time.
–– Hotel Plug & Play is only available when the power is turned ON for the first time.
–– After setting up the TV first and running Clone TV to USB.
–– Next, the TV only needs to exit Hotel Plug & Play, connect to the USB device, then run Clone USB to TV.
TV will enter the RF mode
Standalone mode is set
Local Set
Change Local Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : EU
Change
Skip
Configure your TV
If Standalone
Only is selected
Select your information in the
categories below.
Country
Select the country that
you're in now
Bulgaria
Picture Mode
Standard
If Skip is selected
Easy Set up
c
If you select this, the
setup process will be
completed and go to
hotel menu
Interactive
(Hotel Menu)
<Depending on Region, this step may not exist.>
After selecting the country in the country menu,
some models may proceed with an additional
option to setup the pin number.
If you forget the PIN code, in the Hotel menu,
select the System → TV Reset. And set the pin
code again in the Plug & Play.
Standalone Setup
(Continue Setup)
Standalone Only
(End Setup)
If Standalone
Setup is selected
Auto Tuning
Select your Language
To receive channels, configure the options
below then select Scan.
Select your language to start the on screen setup.
Aerial
English
Channel Type
Press the arrow
buttons to move
around the screen.
Press the enter button
to select.
Eesti
Suomi
Français
Terrestrial
Select the
connected aerial
that you want to use
to get channels.
Digital & Analogue
Scan
Deutsch
The Language Setting will be applied to Main Menu and not Plug and Play.
Auto Tuning
TV Setup Complete!
Hospitality Mode
SIHospitality
Vendor Mode
SI Vendor
Power
On
Standalone
Auto Tuning Complete.
Security
Your TV is now ready to use.
System
OFF
Standalone
OFF
Power On
Channel
Channel
Menu OSD
Menu OSD
Clock
Clock
Remote
RemoteJack
JackPack
Pack
ExternalSource
Source
External
Eco
Solution
HP
Management
0
0
0
0
Analogue
0
Change Settings
Ok
Music Mode
Music Mode
Digital
TV
Radio
Data/Other
* It may differ depending
on the model.
Scan Again
* It may differ depending
on the model.
Logo/Message
Eco Solution
Cloning
Logo/Message
REACH Solution
Cloning
Security
REACH
SystemSolution
When pressing OK button, the
hotel menu appears as shown
on the left. Complete the hotel
menu settings, and then reset
the TV. You can use your TV.
Clock
You can adjust your time to set DST, Time
Zone and clock mode
Clock Mode
Date
--/--/----
Time
--:--
Time Zone
Auto
DST
Set current date and time
Auto
Off
--:--
English
31
1.LocalSet
–– Check the Current Localset.
–– If you want to change the localset, select the Change.
–– If you select the Skip, the Start screen appears.
2. Start - Easy Set Up
–– If you select the Standalone Only, the Standalone hotel mode is set by default.
–– When you select the Interactive, Interactive Setup Menu is displayed. Press the power off button to exit from the
Interactive menu.
–– Select the Standalone Plug & Play to go next step.
3. Select the Language
–– Select the OSD (On Screen Display) language.
–– Display time: The OSD timeouts and operations are the same as all of Samsung's consumer TV models.
4. Select the Country and Picture Mode
–– Select the appropriate country and picture mode.
–– Depending on model and region, some country may not exist.
5. Auto Tuning
–– Select the antenna source and channel type. Configure the settings and select the Scan.
–– The Auto Tuning operation starts searching for channels
–– When the Auto Tuning operation is completed, the channel information is displayed.
6.Clock
–– Set the right time by setting the DST (Daylight Savings Time) and Time Zone.
7. TV Setup Complete
32
English
HD Plug & Play – Local Set (Only Europe)
yy Local Set is very important software setting value such as Languages, Broadcast frequencies, etc.
yy TV might not function, if Local Set is not correctly configured. Select correct Local Set with country list provided.
Local Set change option on
the first page of HD plug&play
Select right Local Set with
country list
TV will reboot automatically to
apply new Local Set
Local Set
Local Set
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
When Local Set is Changed, TV will turn off automatically to apply it.
When Local Set is Changed, TV will restart automatically to apply it.
Turn and reboot automatically
as Local Set is changed
EU
Current Localset : EU
Change
Region
Europe
OK
Countries List
Bulgaria, Croatia, Czech, Estonia, Greece, Hungary, Latvia, Lithuania
Romania, Serbia, Slovakia, Slovenia, EU-Others
Skip
Country
Local Set
Bulgaria
Croatia
Czech
Estonia
Greece
Hungary
Latvia
Lithuania
Romania
Serbia
Slovakia
Slovenia
EU-Others
EU
Italy
EU_ITALY
Austria
Germany
Switzerland
EU_GER
France
EU_FRANCE
Belgium
Luxembourg
Netherlands
EU_BELELUX
Portugal
Spain
EU_SPAIN
Countries List
Bulgria, Croatia, Czech, Estonia, Greece, Hungary, Latvia, Lithuania
Romania, Serbia, Slovakia, Slovenia, EU-Others
Local Set
When Local Set is Changed, TV will turn off automatically to apply it.
After reboot, updated Local
Set is shown
EU_FRANCE
Countries List
France
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Local Set
Current Localset : EU_FRANCE
When Local Set is Changed, TV will turn off automatically to apply it.
Change
Countries List
Austria, Germany, Switzerland
Local Set
When Local Set is Changed, TV will turn off automatically to apply it.
Press Skip, general HD
plug&play will be continued
Local Set
NORDIC
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Countries List
Denmark, Finland, Norway, Sweden
United Kingdom EU_UK
Ireland
CIS
Denmark
Finland
Norway
Sweden
NORDIC
Turkey
EU_TURKEY
Poland
EU_POLAND
Kazakhstan
CIS_RUSSIA
Current Localset : EU_FRANCE
Change
Russia
Ukraine
Skip
EU_GER
Self Diagnosis for TV
Self Diagnosis for HTV
SW Upgrade
Service Pattern
OFF
Sound Bar Out
OFF
TV Reset
If you need to
change Local
Set after HD
plug&play, click
TV Reset function
on Factory mode,
you can progress
HD plug&play
including Local
Set change.
Skip
Start
Interactive
(Hotel Menu)
Standalone Plug & Play
If you select this, the
setup process will be
completed and go to
hotel menu.
(Continue Setup)
Standalone Only
(End Setup)
English
33
SW Clock (Only for HD470S)
The SW Clock shows the current time on the screen when a user presses the Info remote control key in standby mode.
–– If a user presses the Info key when the TV is in standby mode, the TV is turned on and shows the current time on
the screen for 10 seconds and then returns to standby mode.
–– The time is displayed as a digital clock at the normal banner size. The 12 or 24 hour time format is determined
according to the format of the Information.
–– If a user presses the Info key when the TV is on, the original Info key function is executed.
yy Detailed Descriptions
–– The SW clock works depending on the On/Off setting in the Factory install menu.
–– If the SW clock is turned on, the Fast logo option is automatically turned off. (In this case, even if you turn the Fast
logo option on again, it is automatically turned off when the TV is turned on again.)
–– If the master power is turned off, the time setting is only maintained in models with a backup condenser and an
RTC.
–– When a TV in standby mode shows the current time, the video mute and audio mute settings are maintained.
–– In this case, even if the Hotel logo is set to on, the Hotel Logo display is skipped.
–– This feature only works in StandAlone mode.
–– Other key function specifications when the SW clock is running
–– The Info key works like the power key.
–– Pressing the Power or Info key while the SW clock is running, puts the TV into Standby mode.
–– Pressing keys other than the Power and Info keys is ignored while the SW clock is running.
–– In this case, the on timer does not work.
–– The off timer and sleep timer work.
–– When clock mode in the Time menu is set to manual, the time of the sub micom is maintained by the RTC circuit.
–– Even if the current time is not configured, it is displayed in the same way as the menu. (--:--)
34
English
Multi Code Remocon (Only for HD470S)
Multi Code Remote Control is a special transmitter which is designed to control multiple TVs with one remote.
This function is useful when there is more than one TV in one location such as a hospital. The Set ID number will be
displayed in the source OSD. It is possible to support up to 9 different remote key transmission for multi code.
The initial ID code of each TV is “0”.
The ID code can be set and reset in Analog TV mode or PC mode. (not available in TTX or DTV channels)
–– The ID code can be from 0 to 9.
–– Press the RETURN + MUTE keys for longer than 7 seconds and the digit key you want to set.
–– The Set ID OSD will be displayed in a central position.
–– The following words will be displayed. “The Remote control code is set to x. If you want to change the Remote
control code. Enter the digit you want to change.” (x is the digit number) This OSD will be displayed until the exit
key is pressed.
Remote control code is set to 0. If you want
to change the Remote control code, enter the
chosen digit.
–– For example, the TV and Remote control will be set to ID code #1 if the user presses #1.
–– The following words will be displayed.“Remote control code is changed to 1”. The TV can then only be controlled
by a remote control with the same ID code as the TV.
–– If the ID code between the remote control and the TV does not match, the following words will be displayed.
“ TV ID x” (x is the TV’s ID)
–– To reset the ID code, press the EXIT + MUTE keys for longer than 7 seconds. The ID codes of both the TV and
Remote control will be reset to “0”. “Remote control code is set to 0.” will be displayed.
–– The way to set or reset the ID may differ depending on the remote control. See the table below.
Setting the Time
OMENU → System → Time → Clock → Clock Set
yy The time is entered
–– Press the remote control button to select Clock and set up the time.
Time
Clock
Sleep Timer
Off
Wake-up Timer
yy Setting the Interactive Mode Time
–– If the Hotel System transmits the time information, the time is set
automatically.
–– If the Hotel System does not transmit the time information, the time
cannot be displayed.
✎✎ If the time is set, the clock will be displayed on the front panel.
Clock
Clock Mode
Manual
yy Clock Set
yy Time Zone
Auto
English
35
Channel Bank Editor (Smoovie TV Only) (Only for HD470S)
Channel Bank Editor is a function to edit channels with 3 different Bank Options.
Depending on the Bank card, there are specific channels hotel customers can enjoy.
Setting the Channel Bank Editor in Stand-alone Mode
1. Enter the Hotel Standalone menu by pressing “MUTE+1+1+9+Enter”
2. Please select the SI vendor : “Smoovie”
3. You will be able to see the new menu option “Channel Bank Editor”
4. Enter “Channel Bank Editor”
Hospitality Mode
SI Vendor
Standalone
System
OFF
d
SI Vendor
Smoovie
d
Channel
d
Channel Bank Editor
<Depending on the model and region, some menu items may not exist>
5. Edit the channel bank like in the example below.
a. Bank1 (Free channel): Select the channel that will be used when the remote control has no card.
b. Bank2 (Family Card - Green): Select the channel that will be used when a remote control has a GREEN CARD.
c. Bank3 (Adult Card - Red): Select the channel that will be used when a remote has a RED CARD.
Channel Bank Edit
Bank1 (4)
Bank2 (6)
Bank3 (36)
All
c
1
1futech
c
c
c
1
BBC1
c
c
c
2
24ore.tv
c
c
2
C3
c
c
3
BBC World
c
c
3
C5
c
c
4
Coming Soom
c
4
S2
c
n Move
E Select/Deselect
R Return
References of using SMOOVIE Remote Controller
1. If you select SMOOVIE as the SI vendor, you should use a SMOOVIE Remote Controller.
2. Using the numeric keys of the remote controller, users can only select Bank1 channels.
With this in mind, if you want to change the channel using a Green or Red Card, please use the channel up/down
keys.
3. In the Channel guide or Channel list, users can only see the Bank1 channel list.
36
English
Channel Editor
Channel Editor edits channel number and name.
–– Use Channel Editor to sort the channels as user-desired channel numbers.
Hospitality Mode
SI Vendor
Standalone
Security
OFF
System
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
r
Channel Editor
External Source
HP Management
Eco Solution
Logo/Message
Cloning
REACH Solution
<Depending on model and region, some menu items may not exist>
Simple Steps for channel Editor under Stand-alone Mode
Step
Broad Outline
1
Operate ‘Channel Auto Store’ in the Hotel Option Menu
2
Enter ‘Channel Editor’ in the Hotel Option Menu
3
Compile a table related to the final channel lists you want
4
Rearrange channels with TOOLS button based on the table you compiled
5
Press the EXIT or RETURN Button to exit.
<For better comprehension, please refer to the following details>
English
37
My Channel (Only for HD470S)
Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre, shows
the corresponding channels.
yy You must select the country first, or you cannot set a genre.
yy If you select the genre that not added any channels, the Channel list displays all of the available channels.
yy My Channel works in Standalone mode only.
yy SI Vendor in Standalone mode: This does not work if Smoovie is selected.
yy This is in the Hotel Options in the Hotel Menu -> Service Mode and can be turned on or off.
yy This option only works when it is set to On.
Channel Composition [Genre Mode]
Standard
Hotel
Category
Ch. Mode
Genre
All (Default)
News
Radio
Entertainment
Sport
Hotel
Antenna Mode
Activation
Air/Cable
O
O
O
O
O
O
Description
Provide genre channel mode by each country that master
has managed in factory mode.
My Channel
Current status All Country / All
Country
Genre
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
* For the number of items to be displayed in the list, refer to the design document.
Key Guide
Button
Action
Nav. Help
BLUE
Returns to the screen. (Genre setup: Last Country & Genre)
Keep Previous
ENTER
Selects an item.
Enter
Ch. Up/Down
Move the highlight by page.
(No Guide)
UP/DOWN
Navigates the each country, genre list. (in a circular manner.)
RIGHT
Selects the highlighted item, and then move the highlight to Genre section.
RETURN
Returns to the screen. (Genre setup: Last Country & Genre)
(No Guide)
EXIT
Returns to the screen. (Genre setup: Last Country & Genre)
(No Guide)
38
English
Move
✎✎ Notes
yy This section describes the layout of the Front UI that appears when the TV is turned on. (Factory Mode > Genre
Mode: Enable)
yy The genre is a sub-list for each country.
yy The broadcast screen that was being displayed the last memorial channel.
–– If user want to keep the previous country & genre channel map, press the ‘BLUE’, RETURN, and EXIT remotecontrol key to close the Front UI.
✎✎ Etc.
yy Default Highlight : Last Memory items (Country, Genre)
yy Timeout (60 sec)
Elements
No
Name
Description
1
Background Screen
Displays the last memorized channel that appears when TV is turned on.
2
Function Title
This is name of the function.
3
Current Status
Display current settings the Country/Genre.
4
Country Items
The item for the country list is displayed.
Displays the last selected country.
5
Genre Items
The item for the genre list is displayed.
Displays available genre items by each country that master managed in factory mode. (always
provide ‘All’ item)
Displays the last selected genre.
6
Highlight
If the item title is too long to be displayed within the area, Auto Text Sliding works.
7
Indicator
This is displayed when there is a previous or next page.
8
Nav. Help
The key guide is right-aligned.
English
39
Highlight Interaction [Country Items]
yy This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
✎✎ Notes
yy Users can navigate the items in each country & genre list by pressing the up or down remote control keys.
yy Circular navigation is supported.
1
My Channel
My Channel
DOWN
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
OK
Cancel
UP
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
OK
Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
UP x 5
DOWN x 5
My Channel
Current status All Country / All
Country
Genre
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
DOWN
UP
UP
DOWN
My Channel
Current status All Country / All
Country
Genre
Belgium
All
China
News
Denmark
Radio
Finland
Entertainment
France
Sports
Germany
Hotel
OK
Cancel
} Keep Previous n Move E Enter
UP x N
DOWN x N
END
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
Country
Genre
South Korea
All
South Korea
All
Spain
News
Spain
News
Sweden
Radio
Sweden
Radio
Turkey
Entertainment
UK
Sports
USA
Hotel
Turkey
Entertainment
UK
Sports
USA
Hotel
40
OK
Cancel
} Keep Previous n Move E Enter
English
OK
Cancel
} Keep Previous n Move E Enter
Highlight Interaction [Default Genre]
yy This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
ENTER / RIGHT
Genre
Country
Genre
All Country
All
All Country
All
Austria
News
Austria
News
Belgium
Radio
Belgium
Radio
China
Entertainment
China
Entertainment
Denmark
Sports
Denmark
Sports
Finland
Hotel
Finland
Hotel
OK
Cancel
LEFT
OK
Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
yy The current selection of the country is high-lighted.
yy Default High-light: The current selection of the genre.
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
Country
Genre
ENTER / RIGHT
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
LEFT
} Keep Previous n Move E Enter
yy Seems source error, it should be read as "The other item
of the county is high-lighted.". Please verify. (ex. France)
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
yy Default Highlight : All
English
41
Mode Change Interaction 1 (1/2)
yy This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
Country
DOWN
Genre
All Country
All
All Country
All
Austria
News
Austria
News
Belgium
Radio
Belgium
Radio
China
Entertainment
China
Entertainment
Denmark
Sports
Denmark
Sports
Finland
Hotel
Finland
Hotel
OK
Cancel
LEFT
OK
Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
yy Current Genre Mode : All Country / Sports
ENTER / RIGHT
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
ENTER
Genre
Country
UP
Genre
All Country
All
All Country
All
Austria
News
Austria
News
Belgium
Radio
Belgium
Radio
China
Entertainment
China
Entertainment
Denmark
Sports
Denmark
Sports
Finland
Hotel
Finland
Hotel
OK
Cancel
DOWN
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
yy If the country is selected, highlight
moves to genre menu automatically.
ENTER / RIGHT
6
42
English
OK
Cancel
Mode Change Interaction 1 (2/2)
yy This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
1
5
6
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
Country
OK
Cancel
} Keep Previous n Move E Enter
yy The genre mode change complete message is displayed.
yy Timeout(5 sec.)
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
OK
Cancel
} Keep Previous n Move E Enter
yy Pressing the left key from the genre to country menu
highlights an existing selected country item.
ENTER / RETURN / Timeout
Genre Mode changed to Aistria / News.
English
43
Mode Change Interaction 2 (1/2)
yy This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
1
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
Country
DOWN X 6
OK
Cancel
UP X 6
Genre
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
yy Current Genre Mode : All Country / Sports
ENTER / RIGHT
5
My Channel
Current status All Country / All
Country
Genre Mode Keep All Country / All.
BLUE
/
RETURN
/
EXIT
Genre
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
yy Current Genre Mode : All Country / Sports
44
English
yy If the country is selected, highlight moves to
genre menu automatically.
Power On Scenario [Last Memory]
yy This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
1
Genre Mode changed to Aistria / News.
POWER
Power Off
yy Current Genre Mode : Austria / News
POWER
Genre Mode changed to Aistria / News.
yy Current Genre Mode : Austria / News
English
45
Genre Editor
yy Country and Genre selection can be done in channel list Menu.
yy Pressing Red Key enables country sub list, here viewer can scroll down and select country of choice.
yy Genre selection can be done using Left/right key i.e scrolling horizontally in channel list menu.
yy If viewer wants to change Genre or country in TV On state, it can be done using this feature.
Channel Genre Edit
Registered
0
News
Radio
1
C--
2
C78
b Select All Items On Column
yy
yy
yy
yy
yy
yy
46
Entertainment
Sports
Hotel
C67
{ Deselect All Items On Column
E Select
R Return
An editor to set genre for each Hotel TV channel.
Stored channels can be added to a particular genre in genre editor menu.
A channel can belong to multiple genres.
Genre Options available are : News, Radio, Entertainment, Sport, and Hotel.
Genre selection can be done either on Mychannel FrontUI or in Channel List.
This feature sorts out channels of particular genre in a list. Guest can select genre of his choice and select channel by
scrolling down sorted list.
English
Mixed Channel Map (Only for HD470S)
The Mixed Channel Map function mixes Air, Cable and Satellite channels
–– The Mixed Channel Map function should be ON in order to mix Air, Cable and Satellite channels.
–– Use the Channel Editor to sort the channels after turning on the 'Mixed Channel Map' function in the Hotel Option
Menu
Sound Bar (Only for HD470S)
yy Samsung Sound-Bar & Hospitality TV in 2015
–– Use Samsung Sound-Bar & hospitality TV support HDMI 1.4 to listen to TV sound on the Sound-Bar by using a
single HDMI cable.
–– Supporting model.
yy Sound-Bar : HW-F350/F450/F550
yy The “Hotel mode” operation from the Sound Bar
–– The following TV hotel options should be set in advance.
yy Hotel option → Power On → Power ON Volume = "Enable" / Power ON Vol / Max Vol
yy Hotel option → External Device → Sound Bar Out = "On"
–– Connect an HDMI cable from the HDMI OUT port of the Sound-BAR to the HDMI1 port of the hospitality TV.
–– After being connected to the 2015 hospitality TV via an HDMI Cable, the Sound-Bar automatically detects the TV
while it turns on, and is converted to “hotel mode” by itself.
–– The change of the power-on volume & max volume on the TV is applied to the connected sound-bar since the TV
boots twice .
yy Features of "Hotel Mode" in Sound Bar
–– Synchronized power on/off with the TV.
–– HDMI_CEC enabled.
–– Accessible “HDMI OUT” port only. (Other inputs are disabled)
–– Synchronized “power-on”&“max” volume with the TV. (The Sound-Bar’s volume is set to half that of the TV)
–– Adjustable “power-on”&“max” volume acquired from the TV’s hotel option menu. (Sound-Bar volume=TV volume/2)
Ex.) If the volume settings on the TV are “power-on volume=20 and max volume=90”, the Sound bar will work as
power-on volume=10, max volume=45.
*This function may differ depending on the model.
English
47
Installing the Wall Mount
Wall mount items(sold separately) allow you to mount the TV on a wall. For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items. Contact a technicial for assistance when installing the wall mounted
bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to
install the TV on your own.
Wall mount Adapter
( Depending on the Model )
Before installing any other wall mounting kit, assemble the wall mount adapter provided separately with the TV.
Wall Mount Kit Specifications (VESA)
✎✎ The Wall mount kit is not supplied but sold separately.
Install your wall mount on a solid wall, perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installing on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎ NOTE
yy Standard dimensions for wall mount kits are shown in the table below.
yy When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
yy Do not use screws that do not comply with VESA standard screw specifications.
yy Do not use screws longer than the standard dimensions, as they may cause damage to the inside of the TV set.
yy For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on their specifications.
yy Do not fasten the screws too tightly. This may... damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
yy Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
yy Do not exceed a 15 degrees tilt when mounting this TV.
inches
VESA Spec. (A * B)
Standard Screw
Quantity
32
200 x 200
M8
4
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
48
English
Securing the TV to the Wall
[
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not
hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety
precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
To avoid the TV from falling
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed
onto the wall.
✎✎ You may need additional material, such as an anchor, depending on the type of wall.
✎✎ Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.
2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the
TV again.
✎✎ Screws may not be supplied with the product. In this case, please purchase the screws of the following
specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string
tightly.
✎✎ NOTE
yy Install the TV near to the wall so that it does not fall backwards.
yy It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on
the TV.
yy Untie the string before moving the TV.
4. Verify that all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you
have any doubt about the security of your connections, contact a professional installer.
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically
fix the system when using it in a public place. The appearance and locking
method may differ from the illustration, depending on the manufacturer. Refer to
the manual provided with the Kensington Lock for additional information on proper
use.
To lock the product, follow these steps:
Please find the “K” icon on the rear of the TV. A kensington slot is beside the
“K” icon.
1. Wrap the Kensington lock cable around a large, stationary object such as
desk or chair.
1
<Optional>
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product (1).
4. Lock the lock.
✎✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎✎ The locking device has to be purchased separately.
✎✎ The location of the Kensington Lock may be different depending on the model.
English
49
Specifications
Items
TV System
Audio out
Speaker out
EXT(RGB)
HDMI
Antenna
DATA
Operating temperature
Operating Humidity
Storage Temperature
Storage Humidity
Comment
DVB-TC, DVB-T2C
A/V
Input
Specification
5W X 2
Audio Video Jack
Scart Jack
Compatible with the HDMI Specifications
75 ohm Unbalanced, Din Jack
DATA
RJ-12
RJP
RS232
10°C ~ 40°C (50°F ~ 104°F)
10% ~ 80%
non-condensing
-20°C ~ 45°C (-4°F ~ 113°F)
5% ~ 95%
non-condensing
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For information about the power supply, and more information about the power consumption, refer to the label
attached to the product.
✎✎ The above specifications may differ depending on the model.
✎✎ For information on Samsung’s environmental commitments and product-specific regulatory obligations, e.g. REACH,
WEEE, Batteries, visit http://www.samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_
corner.html
50
English
Supported Video Formats
File Extention
Container
Video Codec
DivX 3.11/4.x/5.x/6.x
*.avi / *.mkv
*.asf / *.wmv
*.mp4 / *.3gp
*.vro / *.mpg
*.mpeg / *.ts
*.tp / *.trp
*.mov / *.flv
*.vob / *.svi
*.divx
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
Window Media Video v9
*.webm
WebM
VP8
MPEG4 SP/ASP
Resolution
Frame rate(fps)
Bit rate(Mbps)
1920 x 1080
30
640 x 480
8
Dolby Digital
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
Dolby Digital Plus
MPEG (MP3)
DTS (Core)
G.711(A-Law, μ-Law)
H.264 BP/MP/HP
Motion JPEG
6~30
MPEG2
MPEG1
30
1920 x 1080
Audio Codec
20
Vorbis
✎✎ Other Restrictions
yy Video content will not play, or not play correctly, if there is an error in the content or the container.
yy Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec
listed in the table.
yy If the Index Table is in error, the Seek (Jump) function is not supported.
yy Some USB/digital camera devices may not be compatible with the player.
yy The menu can be displayed late if the video is over 10Mbps(bit rate).
Video decoder
Audio decoder
yy Supports up to H.264, Level 4.1 (FMO/ASO/RS are not supported.)
yy frame rate :
–– Below 1280 x 720: 60 frame max
–– Above 1280 x 720: 30 frame max
yy VC1 AP L4 is not supported.
yy GMC is not supported.
yy
yy
yy
yy
WMA 10 Pro supports up to 5.1 channel and M2 profile.
WMA lossless audio is not supported.
Vorbis supports up to 2ch.
Dolby Digital Plus supports up to 5.1 channel.
Supported Subtitle Formats
yy External
yy Internal
Name
File extension
Name
Container
Format
MPEG-4 timed text
.ttxt
Xsub
AVI
Picture Format
SAMI
.smi
SubStation Alpha
MKV
Text Format
SubRip
.srt
SubViewer
.sub
Advanced SubStation
Alpha
MKV
Text Format
Micro DVD
.sub or .txt
SubRip
MKV
Text Format
SubStation Alpha
.ssa
MPEG-4 timed text
MP4
Text Format
Advanced SubStation Alpha
.ass
Powerdivx
.psb
Supported Photo Formats
File Extension
Type
Supported Music Formats
Resolution
*.jpg
*.jpeg
JPEG
15360 X 8640
*.bmp
BMP
4096 X 4096
*.mpo
MPO
15360 X 8640
File Extension
Type
*.mp3
MPEG
*.m4a
*.mpa
*.aac
*.flac
*.ogg
*.wma
*.wav
*.mid
*.midi
Codec
MPEG1
Audio Layer 3
MPEG4
AAC
FLAC
OGG
FLAC
Vorbis
WMA
WMA
wav
wav
midi
midi
Remark
Can support up to 2channel
Can support up to 2channel
WMA 10 Pro supports up to 5.1
channel and M2 profile. (WMA
lossless audio is not supported.)
Can not support seeking
English
51
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRIA
BELGIUM
BOSNIA
BULGARIA
CROATIA
CZECH
DENMARK
FINLAND
FRANCE
GERMANY
CYPRUS
GREECE
HUNGARY
ITALIA
LUXEMBURG
MONTENEGRO
SLOVENIA
NETHERLANDS
NORWAY
POLAND
PORTUGAL
ROMANIA
SERBIA
SLOVAKIA
SPAIN
SWEDEN
SWITZERLAND
UK
EIRE
LITHUANIA
LATVIA
ESTONIA
TURKEY
Customer Care Centre
0800-SAMSUNG (0800-7267864)
[Only for Dealers] 0810-112233
02-201-24-18
055 233 999
*3000 Цена в мрежата
0800 111 31, Безплатна телефонна линия
072 726 786
Web Site
www.samsung.com/at/support
www.samsung.com/be/support (Dutch)
www.samsung.com/be_fr/support (French)
www.samsung.com/support
www.samsung.com/bg/support
www.samsung.com/hr/support
800 - SAMSUNG (800-726786)
www.samsung.com/cz/support
Samsung Electronics Czech and Slovak, s.r.o. V Parku 2323/14, 148 00 - Praha 4
70 70 19 70
www.samsung.com/dk/support
030-6227 515
www.samsung.com/fi/support
01 48 63 00 00
www.samsung.com/fr/support
0180 6 SAMSUNG bzw.
www.samsung.com/de/support
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk
max. 0,60 €/Anruf)
8009 4000 only from landline, toll free
80111-SAMSUNG (80111 726 7864) only from land line www.samsung.com/gr/support
(+30) 210 6897691 from mobile and land line
0680SAMSUNG (0680-726-786)
www.samsung.com/hu/support
0680PREMIUM (0680-773-648)
800-SAMSUNG (800.7267864)
www.samsung.com/it/support
261 03 710
www.samsung.com/be_fr/support
020 405 888
www.samsung.com/support
080 697 267 (brezplačna številka)
www.samsung.com/si/support
088 90 90 100
www.samsung.com/nl/support
815 56480
www.samsung.com/no/support
801-172-678* lub +48 22 607-93-33*
www.samsung.com/pl/support
* (koszt połączenia według taryfy operatora)
808 20 7267
www.samsung.com/pt/support
*8000 (apel in retea)
www.samsung.com/ro/support
08008-726-78-64 (08008-SAMSUNG) Apel GRATUIT
011 321 6899
www.samsung.com/rs/support
0800 - SAMSUNG (0800-726 786)
www.samsung.com/sk/support
34902172678
www.samsung.com/es/support
0771 726 7864 (0771-SAMSUNG)
www.samsung.com/se/support
0800 726 78 64 (0800-SAMSUNG)
www.samsung.com/ch/support (German)
www.samsung.com/ch_fr/support (French)
0330 SAMSUNG (7267864)
0818 717100
8-800-77777
8000-7267
800-7267
444 77 11
© 2015 Samsung Electronics Co., Ltd. All rights reserved.
www.samsung.com/uk/support
www.samsung.com/ie/support
www.samsung.com/lt/support
www.samsung.com/lv/support
www.samsung.com/ee/support
www.samsung.com/tr/support
HD450S_470S-EU-ENG-03
Download PDF

advertising