Samsung | HG32EC673BW | Samsung SMART Hospitality Display 32HC673 Benutzerhandbuch

670/673/675/470/770
LED TV
Installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/register
Model
Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specifications may be changed without notice.
Instruction
This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a
computer controlled system for hotels and other hospitality businesses.
Interactive: When the TV is powered-up initially, it sends a command to identify the SBB/STB. If identified, the TV switches to
ONLINE mode and full control is through the SBB/STB.
If the TV is in ONLINE mode, it stops receiving IR (Samsung remote) commands and acts according to the interface protocol.
Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operations.
Operational Modes
When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states:
• ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication.
This prevents guests from trying to cheat the system by disconnecting the SBB/STB.
Hotel TV
Hotel Mode On
SBB/STB Online if
one success within
10 attempts
Stand-alone
Mode
SBB/STB
Online-10
consecutive
fails
Power
ON
SBB/STB
StatusAttempt
every 2secs
Online Mode
Poll Rate 20/sec
To set the details for Stand-alone or interactive mode, refer to pages 19-24(Setting the hotel option data : Stand-alone
mode and Interactive mode)
• Some operations may be restricted to prevents guests from "cheating" the TV system.
• No main menu (Interactive mode) or Channel Menu, Plug & Play in Main Menu (Stand-Alone mode)
• Limited Volume and Panel key lock or unlock
Still image warning
Avoid displaying still images (like jpeg picture files) or still image elements (like TV Programme such as TV Programmeme logos,
the panorama or 4:3 image format, stock or news bars at the bottom of the screen etc.) on the screen. Constantly displaying still
pictures can cause uneven wear of the screen phosphor, which will affect the image quality. To reduce risk of this effect, please
follow the recommendations below:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image over the full screen, use the TV set picture format menu for the best possible match.
• Reduce the brightness and contrast values to the minimum require values to achieve the desired picture quality. Exceeding
these values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to the appropriate user manual
section for more details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
• If you use parts provided by other manufacturers, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Contents
yy Operational Modes....................................................................................................................................... 2
yy Still image warning........................................................................................................................................ 2
yy Securing the Installation Space..................................................................................................................... 2
yy Accessories.................................................................................................................................................. 4
yy Installing the LED TV Stand.......................................................................................................................... 4
yy Using the TV's Controller............................................................................................................................ 18
yy Viewing the Remote Control....................................................................................................................... 19
yy Connecting the Bathroom Speakers........................................................................................................... 24
yy Connecting the MediaHub HD.................................................................................................................... 26
yy Connecting the RJP (Remote Jack Pack)................................................................................................... 27
yy Setting the Hotel Option Data..................................................................................................................... 29
yy Installing the Wall Mount............................................................................................................................. 53
yy Securing the TV to the Wall......................................................................................................................... 54
yy Anti-theft Kensington Lock......................................................................................................................... 54
yy Specifications............................................................................................................................................. 55
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government office, for details of where and
how they can take these items for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return
systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not
be disposed of with other household waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference
levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm
to human health or the environment. To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through your local, free battery return
system.
English
3
ENGLISH
yy Instruction.................................................................................................................................................... 2
Accessories
✎✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎✎ The items’ colours and shapes may vary depending on the model.
•
•
•
•
Remote Control & Batteries (AAA x 2)
Power Cord / Data Cable
Safety Guide (Not available in some locations)
RF Signal Gender (DIN,F Type)
(HG28EC675:2EA;HG28EC470:1EA)
• Hotel Mount Kit (HC670)
•
•
•
•
•
Quick Setup Guide
Guide Stand
Screws
Stand
Holder-Ring (2EA) (HG46EC770)
✎✎ The stand and stand screws may not be included depending on the model.
✎✎ The Data Cable may not be included depending on the SI Vendor.
Installing the LED TV Stand
Stand Components
When installing the stand, use the provided components and parts.
B-1 1 EA
A-2 1 EA
A-1 1 EA
HG32*C670,HG40*C670,HG48*C670,
HG32EC675,HG40EC675,HG48EC675
HG28EC675,HG28EC470
A-4 1 EA
A-3 1 EA
HG**EC670, HG**EC675, HG**AC670,
HG28EC470
(Except HG22EC673,HG32EC673)
B-2 1 EA
C
M4 X L12
HG32EC470, HG39EC470, HG32AC470
HG22EC673/HG32EC673
HG**EC470, HG**AC470
(Except HG22EC470)
A-6 1 EA
A-5 1 EA
B-3 1 EA
HG**EC770
HG22EC470
HG**EC770
Stand
4
English
Guide Stand
Screws
HG**EC670,HG**AC670,HG**EC675
1
C
B
A-1
2
x4
(M4 X L12)
Front
ATTENTION
DO NOT USE
DO NOT USE
DO NOT USE
CHEMICALS
GREASE
OIL
✎✎ Place a soft cloth over a table to protect the TV,
and then place the TV on the cloth screen side
down.
✎✎ Insert the Stand Guide into the slot on the bottom of the TV.
Side
3
x3
C
(M4 X L12)
or
C
x4
(M4 X L12, for 40”
and above models)
✎✎ Make sure to distinguish between the front and back of the Stand and Stand Guide when assembling them.
✎✎ Make sure that at least two people lift and move the TV.
HG28EC675,HG28EC470
1
2
1
2
3
: x4 (M4 X L12)
✎✎ Place a soft cloth over a table to protect the TV, and
then place the TV on the cloth screen side down.
✎✎ Insert the Stand Guide into the slot on the bottom of
the TV.
3
: x3 (M4 X L12)
English
5
HG22EC673, HG32EC673
1
✎✎ Place a soft cloth over a
table to protect the TV, and
then place the TV on the
cloth screen side down.
✎✎ Insert the Stand Guide into
the slot on the bottom of
the TV.
2
X4
C
(M4 X L12)
A-3
HG32EC470,HG39EC470,HG32AC470
1
2
x4
C
(M4 X L12)
Top View
B
Front
A
ATTENTION
Rear
DO NOT USE DO NOT USE DO NOT USE
CHEMICALS
3 Side View
(Correct assembly)
GREASE
OIL
✎✎ Place a soft cloth over a table to protect the TV, and
then place the TV on the cloth screen side down.
✎✎ Insert the Stand Guide into the slot on the bottom
of the TV.
(Incorrect assembly)
C
x4
(M4 X L12)
6
English
HG22EC470
1
2
X 3 (M4 X L12)
HG**EC770
1
C
2
x4
Top View
(M4 X L12)
B
ATTENTION
A
3
DO NOT USE
DO NOT USE
DO NOT USE
CHEMICALS
GREASE
OIL
✎✎ Place a soft cloth over a table to protect the TV,
and then place the TV on the cloth screen side
down.
✎✎ Insert the Stand Guide into the slot on the bottom of the TV.
Side View
(Incorrect assembly)
(Correct assembly)
4
C
x4 (M4 X L12)
English
7
Assembling the swivel (32 inch TVs or larger)
The TV stand more than 32inch supports the swivel function. The swivel angle support all of 20°, 60° and 90° and you
can change the swivel angle by using BRACKET HOLDER SWIVEL.
✎✎ For the HG***C670 models, the available stand swivel angles are 20˚, 60˚, and 90˚.
✎✎ For the HG**EC770 models, the available stand swivel angle is 20˚.
¦¦ 20° ~ 60° swivel
If you assemble the wedge on the bottom of the stand to the hole of BRACKET HOLDER SWIVEL where 20° or 60° is
marked, the swivel angle becomes each 20° ~ 60° in the left and right side.
(The shape of stand depend on the model.)
¦¦ 90° swivel
If you assemble only screws after you remove BRACKET HOLDER SWIVEL, the swivel angle becomes each 90° in the
left and right side.
¦¦ Hotel Mount Kit (only HC670 have)
Bolt + Nut
Short Bolt (2EA)
Long Bolt (2EA)
Nut (2EA)
Washer (2EA)
Top
Bottom
Affix the stand to a flat surface such as a dresser top, desk
top, or entertainment center as shown.
WARNING: To prevent injury, this apparatus must be securely attached to the floor/ table in accordance with
the installation instructions.
8
English
Viewing the Connection Panel
COMMON
INTERFACE
1
COMMON
INTERFACE
!
DATA
2
PC / DVI
AUDIO IN
CLOCK
HDMI IN 2
(DVI)
7
HDMI IN 2
(DVI)
<HC670/675>
HG28EC675
HG32EC675
HG40EC675
HG48EC675
HG32EC670
HG40EC670
HG48EC670
1
DATA
@
HDMI IN 1
(ARC)
3
PC IN
HDMI IN 1
(ARC)
AV IN
3
AV IN
VARIABLE
AUDIO OUT
HP-ID
RJP
9
(5V 0.5A)
/ CLONING
#
4
HP-ID
AUDIO
AUDIO
5
(5V 0.5A)
/ CLONING
VIDEO
VIDEO
4
CLOCK
2
8
5
VOL-CTRL
0
RJP
SATELLITE
AIR/CABLE
6
$
AIR/CABLE
6
<HC470>
HG28EC470
COMMON
INTERFACE
COMMON
INTERFACE
1
HDMI IN 2
(DVI)
PC / DVI
AUDIO IN
VARIABLE
AUDIO OUT
HP-ID
(5V 0.5A)
#
/ CLONING
#
HDMI IN
(ARC)
(5V 0.5A)
/ CLONING
9
AUDIO
AUDIO
5
RJP
@
AV IN
HP-ID
5
HDMI IN
(ARC)
8
VIDEO
4
4
RJP
@
HDMI IN 1
(ARC)
PC IN
3
AV IN
@
HDMI IN 2
(DVI)
7
CLOCK
2
VIDEO
(5V 0.5A)
/ CLONING
5
DATA
3
!
1
DATA
HDMI IN 1
(ARC)
COMMON
INTERFACE
!
RJP
VOL-CTRL
0
6
AIR/CABLE
AIR/CABLE
$
AIR/CABLE
$
$
6
1
(5V 0.5A)
5
DATA
CLOCK
9
English
HDMI IN 2
(DVI)
RJP
2
1
#
@
PC / DVI
AUDIO IN
7
HDMI IN
(ARC)
@
6
HDMI IN 1
(ARC)
2
DATA
CLOCK
AIR/CABLE
6
$
AIR/CABLE
6
<HC673>
HG32EC673
COMMON
COMMON
INTERFACE
!
COMMON
INTERFACE
INTERFACE
1
!
DATA
5
1
HDMI IN 2
(DVI)
PC / DVI
AUDIO IN
DATA
7
RJP
@
HDMI IN 1
(ARC)
HDMI IN 1
(ARC)
CLOCK
32
AV IN
AV IN
4
4
VIDEO AUDIO AUDIO
(5V 0.5A)
/ CLONING
VIDEO
3
HP-ID
5
HP-ID
RJP
5
HDMI IN
(ARC)
8
PC IN
RJP
VARIABLE
AUDIO OUT
9
VOL-CTRL
0
(5V 0.5A)
/ CLONING
#
(5V 0.5A)
/ CLONING
#
$
AIR/CABLE
$
$
AIR/CABLE
6
HDMI IN
(ARC)
@
6
AIR/CABLE
@
HDMI IN 2
(DVI)
<HC470>
HG22EC470
1
1
DATA
DATA
(5V 0.5A)
5
@
2
PC / DVI
AUDIO IN
CLOCK
#
HDMI IN 2
(DVI)
7
2
CLOCK
@
HDMI IN 1
(ARC)
RJP
3
3
8
PC IN
AV IN
AV IN
4
6
4
AUDIO
VIDEO
VOL-CTRL
HP-ID
AUDIO
RJP
9
AV IN
AUDIO
5
(5V 0.5A)
/ CLONING
#
VARIABLE
AUDIO OUT
HP-ID
VIDEO
VIDEO
HDMI IN
(ARC)
$
0
COMMON
INTERFACE
$
DOOR-EYE
RJP
!
AIR/CABLE
HP-ID
DATA
6
$
5
1
3
6
4
1
@
5
DATA
1
3&'9,
䷈书䕨ܺ
DATA
PC / DVI
AUDIO IN
CLOCK
# @
ৄভ䷈书䕨ߏ
ᘧ䞤䷈书䕨ߏ
HP-ID
Ꮋ
RJP
AV IN
9
(ARC)
ANT IN
0
VIDEO
4
HP-ID
#
VARIABLE
AUDIO OUT
(5V 0.5A)
/ CLONINGHDMI IN 1
8
PC IN
໅䷈᥼ࠋ
ৈ
⬊ᄥ⤀ⴑ
䷈书
3
$
HDMI IN 2
(DVI)
7
㾛书
English4
RJP
HDMI 䕨覂 1
(ARC)
8
3&䕨ܺ
$9䕨ܺ
10
HDMI IN
(ARC)
#
@
3
2
USB
(5V 0.5A)
/CLONING
HDMI 䕨覂 2
(DVI)
7
9
$
(5V 0.5A)
$17䕨ܺ/ CLONING
᮵㒔/᳞㒔
$
1
3
4
6
<HC673>
HG22EC673
@
RJP
5
(5V 0.5A)
#
COMMON
INTERFACE
!
HDMI IN
(ARC)
AV IN
AUDIO
VIDEO
6
ANT IN
DATA
HP-ID
1
3
4
$
English
11
<HC670>
HG**AC670
1
DATA
2
PC / DVI
AUDIO IN
CLOCK
HDMI IN 2
(DVI)
7
@
HDMI IN 1
(ARC)
3
PC IN
8
AV IN
VIDEO
4
HP-ID
AUDIO
RJP
5
VARIABLE
AUDIO OUT
9
VOL-CTRL
0
#
(5V 0.5A)
/ CLONING
$
ANT IN
6
<HC670>
HG**AC670
(Hong Kong)
1
DATA
PC / DVI
AUDIO IN
HDMI IN 2
(DVI)
7
@
HDMI IN 1
(ARC)
2
PC IN
8
AV IN
VIDEO
3
HP-ID
AUDIO
4
DOOR-EYE
RJP
5
12
English
6
VARIABLE
AUDIO OUT
9
VOL-CTRL
0
#
(5V 0.5A)
/ CLONING
$
ANT IN
<HC670>
HG**AC670
(China)
1
DATA
3&'9,
䷈书䕨ܺ
HDMI 䕨覂 2
(DVI)
7
@
HDMI 䕨覂 1
(ARC)
3
3&䕨ܺ
8
$9䕨ܺ
㾛书
HP-ID
Ꮋ
䷈书
$
RJP
ৈ
⬊ᄥ⤀ⴑ
(5V 0.5A)
/ CLONING
#
4
ৄভ䷈书䕨ߏ
ᘧ䞤䷈书䕨ߏ
9
໅䷈᥼ࠋ
0
$17䕨ܺ
$
5
᮵㒔/᳞㒔
6
@
USB
(5V 0.5A)
/CLONING
HDMI IN
(ARC)
<HC470>
HG**AC470
5
RJP
#
AV IN
VIDEO
AUDIO
AUDIO
ANT IN
HP-ID
DATA
$
1
3
4
6
English
13
HP-ID
DATA
$
1
3
4
6
<HC470>
HG**EC470
@
USB
(5V 0.5A)
/CLONING
HDMI IN
(ARC)
#
5
COMMON
INTERFACE
RJP
!
AV IN
VIDEO
AUDIO
AUDIO
ANT IN
HP-ID
DATA
$
1
3
4
6
@
RJP
5
(5V 0.5A)
#
COMMON
INTERFACE
!
HDMI IN
(ARC)
AV IN
AUDIO
VIDEO
6
ANT IN
DATA
HP-ID
1
14
English
3
4
$
<HC770>
5
RJP
9
VARIABLE
AUDIO OUT
0
VOL-CTRL
#
USB
(5V 0.5A)
/CLONING
@
HDMI IN
3 (DVI)
HDMI IN
2 (ARC)
HDMI IN 1
7
PC/DVI
AUDIO IN
3
4
$
8
6
1
✎✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
✎✎ When connecting an external device, match the colour of the connection terminal to the cable.
1DATA
–– Used to support data communication between the TV and the SBB.
–– Connects using RJ-12 TV type plugs.
2CLOCK: Set the time after connecting the cable of the External Clock to Clock jack. You can use the External Clock
Display function.
3HEADPHONE JACK: Headphones may be connected to the headphone jack on your TV. While the headphones are
connected, the sound from the built-in speakers is disabled.
4HP-ID: Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone
Box. See page 15. When connecting Headphone to Headphone Box, it works same as Headphone function.
5RJP: This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to
additional modules to improve device use and convenience.
6AV IN / COMPONENT IN
–– Connects the Component video / audio.
–– Connect the component video cables (optional) to the component jacks ("PR", "PB", "Y") at the back of your TV
and the other ends to the corresponding component video out jacks on the DVD.
–– If you wish to connect both the Set-Top Box and the DVD player, you should connect the Set-Top Box to the DVD
Player and connect the DVD Player to the component jacks ("PR", "PB", "Y") on your TV.
–– The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and
Cr.
–– Connect the RCA audio cables (optional) to [R - AUDIO - L] at the back of the TV set and the other ends to the
corresponding audio out jacks on the DVD Player.
English
15
7PC/ DVI AUDIO IN: Connects to the audio input jacks on an Amplifier/Home Theater.
8PC IN: Connect to the video output jack on your computer.
9VARIABLE AUDIO OUT: Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and
the Variable port (RCA).
0VOL-CTRL: Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the
VOLCTRL port.
!COMMON INTERFACE
@HDMI IN: Connects to the HDMI jack of a device with an HDMI output.
✎✎ No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video.
✎✎ Use the HDMI IN (DVI) jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio.
#USB (5V 0.5A) / CLONING
–– Connector for software upgrades and Media Play, etc.
–– Service connection.
$ANT IN (SATELLITE), (AIR/CABLE)
–– To view television channels correctly, the TV must receive a signal from one of the following sources:
–– An outdoor antenna / A cable television system
Display Modes
You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to
the resolution you choose.
After connecting a computer to the TV, set the screen resolution for the TV on the computer. The optimal resolution is
1920 x 1080 @ 60 Hz. If it is set to any other than in the table below, the TV may display nothing. Set the resolution
properly, referring to the user guide of the computer or its graphic card.
The resolutions in the table are recommended.
✎✎ Optimal resolution is 1366 X 768 @ 60 Hz.
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync Polarity
(H / V)
IBM
720 x 400
31.469
70.087
28.322
-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68,681
66.667
74.551
75,062
30.240
57.284
100,000
-/-/-/-
VESA CVT/DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 1024
1280 x 1024
1366 x 768
31,469
37,861
37,500
37,879
48,077
46,875
48,363
56,476
60,023
67,500
45,000
49,702
63,981
79,976
47,712
59,940
72,809
75,000
60,317
72,188
75,000
60,004
70,069
75,029
75,000
60,000
59,810
60,020
75,025
59,790
25,175
31,500
31,500
40,000
50,000
49,500
65,000
75,000
78,750
108,000
74,250
83,500
108,000
135,000
85,500
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
-/+
+/+
+/+
+/+
16
English
✎✎ Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
720 x 400
31.469
70.087
28.322
-/+
MAC
640 x 480
832 x 624
1152 x 870
35.000
49.726
68.681
66.667
74.551
75.062
30.240
57.284
100.000
-/-/-/-
VESA CVT
720 x 576
1152 x 864
1280 x 720
1280 x 960
35,910
53,783
56,456
75,231
59,950
59,959
74,777
74,857
32,750
81,750
95,750
130,000
-/+
-/+
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
31,469
37,861
37,500
37,879
48,077
46,875
48,363
56,476
60,023
67,500
63,981
79,976
45,000
49,702
62,795
47,712
55,935
70,635
65,290
59,940
72,809
75,000
60,317
72,188
75,000
60,004
70,069
75,029
75,000
60,020
75,025
60,000
59,810
74,934
60,015
59,887
74,984
59,954
25,175
31,500
31,500
40,000
50,000
49,500
65,000
75,000
78,750
108,000
108,000
135,000
74,250
83,500
106,500
85,500
106,500
136,750
146,250
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
-/+
-/+
-/+
VESA GTF
1280 x 720
1280 x 1024
52,500
74,620
70,000
70,000
89,040
128,943
-/+
-/-
VESA DMT / DTV CEA
1920 x 1080p
67,500
60,000
148,500
+/+
✎✎ When using an HDMI/DVI cable connection, you must use the HDMI IN (DVI) jack. (The HC470 is not support)
✎✎ The interlace mode is not supported.
✎✎ The set might operate abnormally if a non-standard video format is selected.
✎✎ Separate and Composite modes are supported. SOG is not supported.
English
17
Using the TV's Controller
The TV Controller, which is a small joystick like button at the right back of the TV, lets you control the TV without the
remote control.
Selecting Media Play
Selecting a
Source
Selecting
the Menu
Function menu
Remote control sensor
Power off
TV Controller
The image is drawn
by facing the front
side of the TV.
✎✎ Some functions which require a PIN code may not be available.
✎✎ The product colour and shape may vary depending on the model.
✎✎ Exits the menu when pressing the controller for longer than 1 second.
✎✎ When selecting the function by moving the controller in the up/down/left/ right directions, be sure not to press the
controller. If you press it first, you cannot move it in the up/down/left/right directions.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be
safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are
away on vacation, for example). It is best to unplug the power cord.
18
English
Viewing the Remote Control
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually
impaired persons.
Display and select available video
sources.
Turns the TV on and off.
Have direct access to channels
Alternately selects Teletext, Double or Mix.
GUIDE
TTX/MIX
Electronic Programme Guide (EPG)
display.
Cut off the sound temporarily.
Adjust the volume.
Change channels.
CH LIST
Display channel list on the screen.
Swich to the HOME Screen.
T
HOME
Display the main on-screen menu.
CONTENT
CLOCK
Quickly select frequently used functions.
Return to the previous menu.
ALARM: Enter the hour you want the TV
to turn on.
Press to display information on the TV
screen.
CLOCK: When you press INFO key
in standby mode, TV screen displays
the time.
Select on-screen menu items and
change menu values.
Buttons in the Channel list, Contents
Home menu, etc.
View the Contents Home.
Exit the menu.
A
ALARM
B
C
D
SUBT.
Use these buttons in the Contents
Home.
W: Turns the 3D image on or off. ( Not
available )
SUBT.: Displays digital subtitles.
Installing batteries (Battery size: AAA)
Rear of the Remote
✎✎ NOTE
• Use the remote control within 23 feet of the TV.
• Bright light may affect the performance of the remote
control. Avoid using nearby special fluorescent light
or neon signs.
• The colour and shape may vary depending on the
model.
✎✎ After you have intalled the batteries, use a screwdriver to
• Remote control button 'HOME' & '3D' are not
screw in the screw that holds the battey cover closed.
supported. When pressing these buttons, the TV unit
does not respond.
English
19
POWER
Turns the TV on and off.
SOURCE
Display and select available video
sources.
PRE-CH
Returns to the previous channel.
Have direct access to channels
Alternately selects Teletext, Double or Mix.
TTX/MIX
Cut off the sound temporarily.
MUTE
Adjust the volume.
Change channels.
CH LIST
Display channel list on the screen.
View the Contents Home.
Display the main on-screen menu.
Quickly select frequently used functions.
Select on-screen menu items and
change menu values.
Return to the previous menu.
Buttons in the Channel list, Contents
Home menu, etc.
Use these buttons in the Contents
Home.
20
English
Electronic Programme Guide (EPG)
display.
MENU
CONTENT
GUIDE
Press to display information on the TV
screen.
TOOLS
INFO
CLOCK: When you press INFO key
in standby mode, TV screen
displays the time.
RETURN
EXIT
Exit the menu.
A
B
C
D
HOME
S.MODE
DUAL f-g
ALARM
P.SIZE
SUBT.
HOME : Swich to the HOME Screen.
S.MODE : Lets you select the Sound
Mode.
DUALf-g : Sound effect selection.
ALARM : Enter the hour you want the
TV to turn on.
P.SIZE : Lets you choose the picture
size.
SUBT. : Displays digital subtitles.
¦¦ Using the Football Mode
Football Mode t
✎✎ MENU m → Applications → Football Mode → ENTER E
This mode provides optimized condition for watching sports games.
• a (Zoom): Pause playback and divide the picture into 9 parts. Select a part to zoom it in. Press this button again to
resume.
✎✎ When the Football Mode is on, the picture and sound modes are set to Stadium automatically.
✎✎ If you turn the TV off while watching Football Mode, the Football Mode will be disable.
✎✎ When the Data Service is running, the Zoom is not available.
English
21
Connecting the TV with SBB
TV Rear Panel
ETH MODEM
DATA
Data Cable
PC / DVI
AUDIO IN
CLOCK
PC IN
AV IN
VIDEO
VARIABLE
AUDIO OUT
HP-ID
AUDIO
RJP
1. Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB (SBB) with the Data cable.
✎✎ Use data communication.
22
English
VOL-CTRL
¦¦ List of Vendors and Compatible Data Cables Supplied with the TV
• Confirm that you are using the correct data cable for your vendor. Refer to the code label on the data cables.
English
23
Connecting the Bathroom Speakers
You can connect the Bathroom Speakers using the following method. (HG470 not support it)
¦¦ Connecting through the Variable Output (available without an external amplifier)
TV Rear Panel
VIDEO
1
VARIABLE
AUDIO OUT
Speaker
AUDIO
2
Volume Control Box
VOL-CTRL
VOL+
VOL-
1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel.
Speaker +
Speaker -
N/C
2. Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.
✎✎ The maximum speaker output is 4W, 8Ω.
✎✎ The VARIABLE AUDIO OUT port supports MONO sound out only.
• Installing the Volume Control
–– If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom
speakers.
–– The jack that is connected from the Volume Control Box to the TV is a 3.5mm normal Phone jack.
–– The Volume Control Box switch consists of a Tact switch.
✎✎ Setting the Sub AMP Mode
–– 0: Turns the Sub AMP function off (PWM off).
–– 1: Determines the Sub volume according to the main volume control. That is, the sub volume is determined
according to the Power On Volume, the Min Volume, and the Max Volume values of Hotel Mode.
–– 2: Determines the volume according to the bathroom control panel setting.
• Variable Output Port Specifications
–– Speaker Wire: Use a speaker cable no longer than 82 feet (25m).
Volume Control Box
VOL +
1
3
2
VOL - UP
VOL - DOWN
( White 1 ) ( Black /Red 2 )
24
English
GND
( Shield Wire 3 )
VOL -
¦¦ HP-ID
An additional Headphone Box can be installed on a bed or business desk for added convenience. The installation
procedures are given below.
• Detailed Drawing of the Headphone Box.
TV Rear Panel
HEADPHON BOX
A
Headphone Box
HP-ID
Shield wire
TV Headphones jack
Red Wire (Audio-R)
Whitewire (Audio-L)
Red wire + White wire
Shield Wire
TV HP-ID jack
<Headphone Box>
English
25
Connecting the MediaHub HD
Output to any external source connected to MediaHub HD on the hotel desk.
MediaHub HD Rear
HDMI
USB
RS/232
TV Rear Panel
COMMON
INTERFACE
COMMON
INTERFACE
HDMI IN 2
(DVI)
( )
HDMI IN 2
(DVI)
( )
HDMI IN 1
(ARC)
(
)
HDMI IN 1
(ARC)
(
)
(5V 0.5A)
/ CLONING
(5V 0.5A)
/ CLONING
DATA
PC / DVI
AUDIO IN
CLOCK
PC IN
2 HDMI cable
AV IN
VIDEO
VARIABLE
AUDIO OUT
HP-ID
AUDIO
RJP
VOL-CTRL
SATELLITE
AIR/CABLE
AIR/CABLE
1 RS-232 Data Cable
1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD.
2. Connect the HDMI IN port of the TV and the HDMI port of the MediaHub HD.
• MediaHub HD
–– The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB)
and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub
communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an
external source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/
Inactive sources. The TV switches to the Active external source.
–– You have to connect the HDMI of the MediaHub to the HDMI IN port of the TV.
–– When the TV is on, connect the TV and the RJP within 10 seconds.
• Special features
–– PIP
–– Auto Detection
26
English
Connecting the RJP (Remote Jack Pack)
Output to any external source connected to RJP on the hotel desk.
1 D-sub / PC Audio cable
RJP Rear
USB
HDMI
VIDEO AUDIO AUDIO/PC
RS/232
TV Rear Panel
DATA
COMMON
INTERFACE
COMMON
INTERFACE
HDMI IN 2
(DVI)
( )
HDMI IN 2
(DVI)
( )
HDMI IN 1
(ARC)
(
)
HDMI IN 1
(ARC)
(
)
(5V 0.5A)
/ CLONING
(5V 0.5A)
/ CLONING
PC / DVI
AUDIO IN
CLOCK
PC IN
AV IN
VIDEO
VARIABLE
AUDIO OUT
HP-ID
AUDIO
RJP
4 HDMI cable
3 Video Cable
2 Audio Cable
VOL-CTRL
SATELLITE
AIR/CABLE
AIR/CABLE
5
1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.
2. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP.
3. Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP.
4. Connect the HDMI IN port of the TV and the HDMI port of the RJP.
5. Connect the RJP port of the TV and the RS/232 port of the RJP.
✎✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA7660 (HD Plus).
• RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different
Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are
connected from the RJP to the TV. The RJP communicates with the TV via RS232. The Hot Plug & Play function
allows hotel guests to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/ Inactive sources. The TV will switch to the Active external source according to the priority set
by the User.
✎✎ You can select HDMI IN and AV IN for connecting the RJP.
✎✎ When the TV is on, connect the TV and the RJP within 10 seconds.
English
27
• The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10
seconds. All LEDs blink 5 times to acknowledge that this has been finished.
• The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room.
The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will
restart. If the guest then touches another source button, the TV will change to the selected source and the corresponding LED will be lit.
• After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the
TV and the RJP.
• The following table shows the approximate time in seconds to switch from the TV to the input source, based on the
priority.
✎✎ Scenario 1: When no inputs are connected.
Source
To Connect
AV
PC
HDMI
2 Sec
0.7 Sec
3.9 Sec
✎✎ Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected.
Source
Disconnect
To Connect
Total
AV
PC
HDMI
4.5 Sec
0.7 Sec
3.9 Sec
2 Sec
0.7 Sec
3.9 Sec
6.5 Sec
1.4 Sec
7.8 Sec
✎✎ E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is viewed as the highest priority. If the RJP
is in HDMI mode, and a guest removes and reconnects the AV, the minimum time required to switch to the AV is
6.5 seconds.
• To connect audio (Ipod or Mp3), Music mode should be ON and Jack Ident detect should be OFF.
• A/V, PC and HDMI input sources are supported.
28
English
Setting the Hotel Option Data
To Enter: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.)
To Exit from this menu : power off and turn on again.
No
Hotel TV Function
Category
Item
initial value
1
Hospitality Mode
Hospitality Mode
Standalone
2
SI Vendor
SI Vendor
OFF
3
• Select Hospitality mode.
• Interactive mode : TV works with an SI STB or SBB.
• Stand-alone mode : TV works alone, without an SI STB or SBB.
• Interactive mode : Samsung /2M/ Locatel / VDA / VDA-S / Acentic /
Sutrinerelone mode : OFF /Movielink/Swisscom/ Smoovie
Set the default values that will be applied when the TV is turned on.
• User Defined : Lets you set Power On Channel and Channel Type
manually. See Power On Channel Number and Channel Type below.
• Last Saved : If you select this item, when the TV is turned on, it displays
the channel it was displaying when it was turned off.
Power On Channel
Last Saved
Power On Channel Num
…
When the TV is turned on, it switches automatically to this channel.
Power On Channel Type
…
• Select channel band : ATV (analog air band), DTV (digital air band),
CATV(analog cable band), CDTV (digital cable band)
Power On Volume
Last Saved
Power On Volume Num
…
The TV turns on with this Volume Level.
Min Volume
0
The minimum Volume Level the user can set in Stand Alone Hospitality
mode.
Max Volume
100
The maximum Volume Level the user can set.
Power On Source
TV
Select the input source the TV displays when turns on.
Power On
• User Defined : Lets you set the Power On Volume manually. See Power
On Volume Number below.
• Last Saved : When the TV is turned on, it returns to the volume that had
been set when the power had been turned off.
Power On Option
Last Option
Determines the TV's state when power returns after a power failure or after
you have unplugged the TV and then plugged it in again.
• LAST OPTION : Returns to its last Power state. If it was in Stand-by, it
returns to Stand-by. If it was on, it turns on.
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Channel Setup
…
Gives you direct, immediate access to some of the Channel menu
functions on the user Channel menu such as Auto Tuning, Manual Tuning,
Antenna setting, etc.
…
The Channel Editor lets you edit the channels stored in the TV's memory.
Using Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your
desired channel number order.
• Apply the video mute to channels you select. The video mute blanks out
the video from a channel and outputs only the sound while displaying
a speaker icon on the screen. The Channel Editor also lets you view
information about each channel easily, without your having to display
each channel directly.
ON
• This Feature enables showing/browsing all antenna type (Air/Cable or
Satellite) channels at the same time.
• On: When ON, guests can access the complete Channel Map irrespective of the selected antenna type. The Channel list will also populate Air
as well Cable type channels.
• Off: When OFF, guest can access the Channel Map corresponding to
the selected antenna type [AIR/CABLE or Satellite] only. The Channel
list/Editor will only show the selected antenna type channels.
OFF
• On : Check the DTV Programme channel number. (the DTV channel
editor is inaccessible)
• Off: Do not check the DTV Programme channel number. (the DTV
channel editor is accessible, but additional channel Programme number
update is not supported)
Channel Editor
4
Description
Channel
Mixed Channel Map
Dynamic SI
English
29
No
4
5
Hotel TV Function
Category
Channel
Item
initial value
Channel Rescan
Message
ON
When there is a mismatch between the data in the channel map and the
transmitted data , the TV autotunes the channels to restore the data/
parameters in the channel map.
• On: When Channel Rescan Message is ON, The OSD showing that the
channels are being rescanned will be displayed to Hotel Guests.
• Off: A Hotel Admin can turn the Channel Rescan Message OFF, if the
rescan message OSD should not to be displayed to Hotel Guests.
Pan Euro MHEG
OFF
• Off: If Pan EURO MHEG is set to Off, MHEG runs according to the
existing product specifications.
• ON: If Pan EURO MHEG is set to On, MHEG is ON regardless of the
product specifications or region.
My Channel
OFF
Enable or disable the Mychannel feature.
Genre Editor
…
Subtitle Auto On
OFF
Picture Menu Lock
OFF
Enable or disable the Picture Menu.
Menu Display
ON
• On : The Main Menu is displayed.
• Off : The Main Menu is not displayed.
Panel Button Lock
Unlock
Home Menu Display
ON
Menu OSD
30
English
OFF:The Home Menu is not displayed.
ON:The Home Menu is displayed.
Edit Home Menu.
ON:The Home Menu is Auto Start.
OFF:The Home Menu is not Auto Start.
Clock Type
OFF
Select the clock type (Off/SW Clock/Ext. Clock)
• Off: No clock options of the Hotel options will work.
• SW Clock: Only the SW clock will work.
• Ext. Clock: LED Clock related item work as Dimming/Clock test/Time
Format.
Local Time
Manual
Tiime Channel Type
…
Use clock data from which DTV channel to set the clock.
Time Channel Num
…
DTV channel Number
Music Mode AV
OFF
To get music output from an mp3/audio player through an AV Input Source.
When on, you can hear sound from the player through the TV even there is
no video signal. The TV’s backlight, however, remains on. And add a video
signal,it works normally.
Music Mode PC
OFF
To get music output from an mp3/audio player through a PC Input Source.
When on, you can hear sound from the player through the TV even there is
no video signal. The TV’s backlight, however, remains on. And add a video
signal,it works normally.
Music Mode Comp.
OFF
To get music output from an mp3/audio player through a Component Input
Source. When on, you can hear sound from the player through the TV even
there is no video signal. The TV’s backlight, however, remains on. And add
a video signal,it works normally.(HC770 only)
Music Mode Backlight
OFF
Backlight On/Off option in Music mode to save energy
Clock
Music Mode
Turning the front panel (local key) operations on/off.
• Unlock : Unlocks all panel keys.
• Lock : Locks all panel keys.
• OnlyPower : Locks all panel keys except the Power panel key.
• Menu/Source : Locks the Menu and Source panel keys.
ON
Home Menu Auto Start
7
Edit the genre for channels. (Available when Mychannel is On)
This function turns the function On/Off that automatically turns on the
subtitles in a specific country. This function is supported for Hotel TVs
that are ready to receive DVB broadcasts that is heading to Europe.
This function is related to France’s subtitle specification. The rest of
the countries’ subtitles function according to the appropriate country
specifications regardless of the Subtitle Auto On function.
• On: When the Subtitle Auto On function is ON, it follows France’s
subtitle specifications.
• Off: When the Subtitle Auto On function is OFF, it does not follow
France’s subtitle specifications.
Home Menu Editor
6
Description
Select the way to update clock data.
Use clock data from a DTV channel to set the clock automatically or set the
clock manually when the TV is in stand-alone mode.
No
8
9
10
11
Hotel TV Function
Category
Remote Jack Pack
External Source
Bathroom Speaker
(HC470 not
support it)
Eco Solution
initial value
Priority AV
1
If the jack priority is set, the corresponding source is automatically set when
a jack is inserted according to the jack priority
Priority PC
2
If the jack priority is set, the corresponding source is automatically set when
a jack is inserted according to the jack priority.
Priority HDMI
3
If the jack priority is set, the corresponding source is automatically set when
a jack is inserted according to the jack priority.
13
Logo/Message
Select RJP AV Source (Source selection depends on Model).
AV Option
AV
HDMI Option
HDMI 1
Select which HDMI source of the TV is connected to the RJP jack. (HDMI1/
HDMI2/HDMI3)
USB Pop-up Screen
Default
When a USB device is connected to the TV :
• Default : A popup window appears.
• Automatic : Opens the USB contents menu automatically.
• Disable : Neither the popup window nor the menu appears.
External Source Banner
ON
If set to On, the TV displays the External Source Banner (information) when
you change the TV source to another external input, press the Info key, or
turn the TV on.
• On : The External Source information is displayed on the TV screen.
• Off : The External Source information is not displayed on the TV screen.
Auto source
OFF
• On : When an external input source is connected to the TV, the TV
identifies the input source, and then automatically switches to that input
source.
• Off : Auto Source function is Off.
Anynet+Return Source
Power On Src
Select the return TV source after stopping an Anynet+(HDMI-CEC)
connection. (This Function is especially useful for the Guestlink RJP.)
Sub Amp Mode
2
Determines the Sub AMP operation mode.
−− 0: Turns the Sub AMP function off (PWM off).
−− 1: Determines the Sub volume according to the main volume control.
That is, the sub volume is determined according to the Power On
Volume, the Min Volume, and the Max Volume.
−− 2: Determines the volume according to the bathroom control panel
setting.
Sub Amp Volume
6
Sub AMP Volume level at power on initial condition.
Energy saving
OFF
Adjusts the brightness of the TV to reduce power consumption.
• Off: Turns off the energy saving function.
• Low: Sets the TV to low energy saving mode.
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
Welcome Message
OFF
Displays a the Welcome Message for 5 seconds when the TV turns On.
Edits the Welcome Message.
Edit Welcome Message
12
Description
Item
Turns the Hospitality logo feature On or Off, If On, when the TV is turned
on, the Logo is displayed, before the signal from the initial source, for the
amount of time set in "Logo Display Time".
Hospitality Logo
OFF
Hospitality Logo DL
…
Downloads the Hospitality logo. Hospitality logo file requirements:
• BMP or AVI files only.
• Max file size : BMP - 960 X 540. AVI - 30MB.
• The file can only be named samsung.bmp or samsung.avi.
Logo Display Time
…
Hospitality Logo Display Time (3/5/7 seconds).
Clone TV to USB
-
Clone the current TV options to a USB memory device.
Clone USB to TV
-
Clone the saved TV options on a USB memory device to the TV.
Cloning
Setting Auto Intialize
OFF
When Setting Auto Initialize is set to On, and the power is turned off and on
or the Master Power is turned off and on, the data is restored to the cloned
values. If there is no cloned value, even when the Setting Auto Initialize is
set to On, it will be ignored and the operation will be the same as that when
Setting Auto Initialize is set to Off
English
31
No
14
15
16
Hotel TV Function
Category
REACH
Solution
Security
Description
Item
initial value
REACH 3.0
OFF
• ON: Open the REACH 3.0
• OFF:Closed the REACH 3.0
REACH 2.0
OFF
• ON: Open the REACH 2.0
• OFF:Closed the REACH 2.0
REACH Channel
…
Select SIRCH Update Channel
Group ID
…
Select the SIRCH Group ID
Ticker
…
• On: The TICKER contents is displayed.
• Off: The TICKER contents is not displayed.
REACH Update Time
…
Select the SIRCH update Time. In the SIRCH update time , you have the
option to perform an automatic upgrade at 12:00 AM/PM or at 2:00 AM/
PM. You can perform hourly upgrades at an interval of either 1 hr or 2 hrs.
REACH Update
Immediate
…
• On : Whenever the TV enters Standby mode, always performs the
SIRCH Update.
• Off : Only performs the SIRCH Update at the selected SIRCH Update
Time
Room Number
…
Edit the room number
REACH 2.0 TV Sound
…
• On: The TV sound in the current TV source is output continuously even
though the REACH 2.0 TV menu is displayed.
• Off: The TV sound in the current TV source is stopped when the REACH
2.0 TV menu is displayed.
REACH 2.0 Server
Version
…
Display the version of the SIRCH Clone file currently updated on the TV.
Password Input
…
Input Password 00000000.
Password Setting
…
Set new Password.
Password Reset
…
Reset Password to 00000000.
Security Mode
…
Security Mode ON or OFF.
USB
…
USB Disable or Enable.
HDMI
…
HDMI Disable or Enable.
TTX Security
…
TTX function Enable or disable
Self Diagnosis for TV
…
Enter the Self Diagnosis Menu.
• Picture Test: Use this to check for picture problems. If the problem
appears in the test picture, select Yes and follow the directions on the
screen.
• Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs during the test, select Yes and follow the
directions on the screen.
Self Diagnosis for HTV
…
This lets you check the state of the Variable audio out and the
communication with the SI STB or SBB. If you encounter any problems in
the variable audio out feature or communication with the SI STB or SBB,
please check this items.
SW Update
…
SW USB Update function
Service Pattern
OFF
Display the Service pattern.
Sound Bar Out
OFF
An external device such as a Samsung Sound Bar can be connected
to the TV via an Anynet Connection and the TV Sound can be routed to
the Sound Bar Device. If the feature is OFF in the Hotel Factory Menu,
this functionality is disabled The main TV Speaker will be muted while the
Sound Bar option is ON and the Speaker is connected through HDMI.
TV reset
…
System
Factory reset
✎✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional and interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER
contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are only available in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed in the
REACH server product for more information on operating it.
32
English
¦¦ Welcome Message
The Welcome message is a feature that allows you to display customized message on the TV every time the TV is turned
on by a guest in a hotel room.
–– The Welcome message settings are placed in the Hotel Option Menu.
–– The Welcome message should be ON in order for the message to be displayed when the power is turned on.
Hospitality Mode
Standalone
System
OFF
Standalone
SIHospitality
Vendor Mode
SI Vendor
Power
On
OFF
Power On
Channel
Channel
Menu OSD
Menu OSD
Clock
Clock
Welcome Message
Remote
RemoteJack
JackPack
Pack
ExternalSource
Source
External
ON
Edit Welcome Message
r
Music Mode
Music Mode
ON
Hospitality Logo
Hospitality Logo DL
...
Logo Display Time
...
Eco Solution
Bathroom
Speaker
Logo/Message
Eco Solution
Cloning
Logo/Message
REACH Solution
Cloning
Security
REACH
SystemSolution
Security
<Depending on model and region, some menu items may not exist>
–– The Welcome message can be up to 25 characters and can be edited in the Hotel Service menu.
–– The following is the list of characters supported for the Welcome message.
✎✎ Only the capital letters A to Z are allowed.
–– The Welcome message can be edited using the navigation, colour & enter keys of the remote control in the “Edit
Welcome Message” OSD.
Edit Welcome Message
W
E
L
C
O
M
E
_
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Move
Enter
A
Move to left
B
Move to Right
C
Leave Black
D
Done
Return
–– The Welcome message and hotel logo cannot be active at the same time.
English
33
¦¦ Hotel Logo
The Hospitality Logo function displays the Hotel's logo when the TV is powered on.
–– The Hospitality Logo settings are in the Hospitality mode menus.
–– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
–– If there is a logo image stored in the memory and the Hospitality Logo option is on, the Hospitality logo is
displayed when the TV is turned on.
–– The Hospitality logo is not displayed when the Hospitality Logo option is off, even if the logo image has been
loaded onto the TV.
Hospitality Mode
SIHospitality
Vendor Mode
SI Vendor
Power
On
Standalone
System
OFF
Standalone
OFF
Power On
Channel
Channel
Menu OSD
Menu OSD
Clock
Clock
Welcome Message
Music Mode
Music Mode
Edit Welcome Message
Remote
RemoteJack
JackPack
Pack
ExternalSource
Source
External
Eco Solution
Bathroom
Speaker
r
Hospitality Logo
OFF
BMP
Hospitality Logo DL
Logo Display Time
5 Second
Logo/Message
Eco Solution
Cloning
Logo/Message
REACH Solution
Cloning
Security
REACH
SystemSolution
Security
<Depending on model and region, some menu items may not exist>
• Hospitality Logo
–– This option lets you choose whether the Hospitality Logo image is displayed or not.
–– The Initial value is OFF.
–– Can be set to OFF or ON.
–– When set to ON, the Logo Download and Logo Time Display menu items become accessible.
• Hospitality Logo DL
–– This option lets you download the logo image to the TV’s memory from a USB device.
–– The Wait message appears while the image is being copied to the TV.
–– The Completed message appears when the copy operation has finished successfully.
–– The Failed message appears when the copy operation was unsuccessful.
–– The No USB device message appears if no USB device is connected.
–– The No File message appears if there is no file to copy on the USB device or if the file is in the wrong format (must
be a BMP file). If the No File message appears and there is a logo file on the USB device, check the file format.
• Logo File Format
–– The TV only supports the BMP and AVI formats.
–– The file name must be samsung.bmp or samsung.avi.
–– The maximum resolution of the BMP format is 1280 x 720.
–– The maximum file size of the AVI format is 30MB.
–– The TV does not change the size or scale of the image.
34
English
¦¦ Cloning
USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel
Setup) from one TV set and upload the same settings to other TV sets.
All user-defined settings from the TV (Master Set) can be copied to the USB device.
(
(ARC)
)
• Cloning from TV to USB: This is an operation that copies the stored data from a
specific area of the TV EEPROM to the USB device.
(5V 0.5A)
/ CLONING
1. Insert a USB drive into the USB port on the back of the TV.
2. Enter the Hotel Options by pressing these buttons in the following order.
MUTE → 1 → 1 → 9 → ENTER
3. Press the ▲ or ▼ button to select “Clone TV to USB”, then press the ENTER button.
4. The message “Clone TV to USB” is displayed, then press the ENTER button.
Logo/Message
Cloning
5. You can check the status of the USB cloning operation.
• In Progress: While copying data to the USB device.
• Completed: The copy operation was finished successfully.
• Failed: The copy operation was not finished successfully.
• No USB: No USB device connected.
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
• Clone USB to TV: This is an operation that downloads the stored data to the USB
device to the TV set.
Logo/Message
Cloning
d
1. Insert a USB drive into the USB port at the back of the TV.
2. Enter the Hotel Options by pressing these buttons in the following order.
MUTE → 1 → 1 → 9 → ENTER
OFF
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
3. Press the ▲ or ▼ button to select “Clone USB to TV”, then press the ENTER button.
4. The message “Clone USB to TV” is displayed, then press the ENTER button.
5. You can check the status of the USB cloning operation
• In Progress: While copying data to the USB device.
• Completed: The copy operation was finished successfully.
• Failed: The copy operation was not finished successfully.
• No USB: No USB device connected.
• No File: There is no file to copy on the USB device.
✎✎ Activate copying from USB to TV by pressing ENTER key for 5 seconds.
✎✎ The CLONE function only supports the same model series. (It does not work properly for different model series.)
For fast, instant cloning during installation,
insert a USB drive with master settings from the first TV and press the Enter key for 5 seconds.
Pre-condition for cloning (check point)
–– Cloning should be done between same model (same version).
–– Before cloning, all displays should be updated at the latest version (same version).
English
35
¦¦ Plug & Play
The Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup and
Picture mode Setup when the TV starts for the first time.
–– Hotel Plug & Play is only available when the power is turned ON for the first time.
–– After setting up the TV first and running Clone TV to USB.
–– Next, the TV only needs to exit Hotel Plug & Play, connect to the USB device, then run Clone USB to TV.
Setup > Start
Standalone mode is set.
Local Set
The TV will enter RF mode.
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Configure your TV
Current Localset : EU
Change
Select your information in the
categories below.
Skip
Auto Tuning
Select the country that
you’re in now.
Country
Bulgaria
Picture Mode
Standard
E
Aerial
Air
Channel Type
Digital & Analogue
Scan
E
<Depending on the Region, this
step may not exist.>
Easy Set up
c
If you select this, the
setup process will be
completed and go to
hotel menu.
Interactive
(Hotel Menu)
HG**EC675
After selecting the country in the country
menu, some models may proceed with an
additional option to setup the pin number.
If you forget the PIN code, select the
Service → TV Reset. in the Hotel menu.
Standalone Setup
(Continue Setup)
Standalone Only
(End Setup)
If Standalone Plug
& Play is selected
E
Select the
connected aerial
that you wand to use to
get channels.
then select Scan.
E
E
After Searching the E
channels.
Auto Tuning
Auto Tuning Complete.
All
* TV
* Radio
* Data/Other
Do you want to 2scan for satellite channels?
2
If the aerial cable has
been connected to your TV,
0 Yes to scan.
select
Yes
Analogue
HG**EC670
HG**AC670
HG**EC470
HG**AC470
HG**EC770
0
No
0
E
Change Settings
Scan Again
E
Select your Language
English
then select Scan.
Eesti
Aerial
Suomi
Press the ▲▼◄►
buttons to move the
highlight.
Press the enter button
to select.
Francais
Deutsch
Channel Type
Air
(HC470 not support
bathroom speaker)
Hospitality Mode
SI Vendor
Standalone
Select the connected aerial
that you wand to use to get
channels
below then select Scan.
Aerial
Satellite
Channel Type
Digital & Analogue
Select the
connected aerial
that you wand to use to
get channels.
All
E
Satellite Selection
Astra 19.2E
LNB Settings
Change Options
Scan
The Language Setting will be applied to Main Menu and not Plug and Play.
When pressing
OK button, the
hotel menu
appears as
shown on the
left. Complete
the hotel menu
settings, and then
reset the TV. You
can use your TV.
Scan
System
E
E
OFF
Power On
Channel
Auto Tuning
Menu OSD
Auto Tuning
Auto Tuning Complete.
Auto Tuning is finding channels for you...
Astra 19.2E 10935 MHz (V/R)
Clock
Music Mode
Remote Jack Pack
External Source
Digital
2
* TV
2
* Radio
0
* Data/Other
0
12%
All
● TV
● Radio
● Data/Other
Analogue
Bathroom Speaker
0
0
0
0
Eco Solution
Change Settings
Scan Again
Stop
Logo/Message
Cloning
REACH Server
E
Security
* It may differ depending on
the model.
E
E
Clock Mode
Date
Auto Tuning Complete.
Set current date and time.
Auto
E
--/--/----
Time
--:--
Time Zone
Auto
DST
English
Auto Tuning
Clock
You can adjust your time to set DST, Time Zone
and clock mode.
Your TV is now ready to use
OK
E
* It may differ depending on
the model.
TV Setup Complete!
36
Auto Tuning
Auto Tuning
Select your language to start the on screen setup.
Off
-- : --
All
● TV
● Radio
● Data/Other
0
0
0
0
Astra 19.2E
● TV
● Radio
● Data/Other
0
0
0
0
Change Settings
Scan Again
1.LocalSet
–– Check the Current Localset.
–– If you want to change the localset, select the Change.
–– If you select the Skip, the Start screen appears.
2. Start - Easy Set Up
–– If you select the Standalone Only, the Standalone hotel mode is set by default.
–– When you select the Interactive, Interactive Setup Menu is displayed. Press the power off button to exit from the
Interactive menu.
–– Select the Standalone Plug & Play to go next step.
3. Select the Language
–– Select the OSD (On Screen Display) language.
–– Display time: The OSD timeouts and operations are the same as all of Samsung's consumer TV models.
4. Select the Country and Picture Mode
–– Select the appropriate country and picture mode.
–– Depending on model and region, some country may not exist.
5. Auto Tuning
–– Select the antenna source and channel type. Configure the settings and select the Scan.
–– The Auto Tuning operation starts searching for channels
–– When the Auto Tuning operation is completed, the channel information is displayed.
6.Clock
–– Set the right time by setting the DST (Daylight Savings Time) and Time Zone.
7. TV Setup Complete
English
37
¦¦ HD Plug & Play – Local Set (Only Europe)
• Local Set is very important software setting value such as Languages, Broadcast frequencies, etc.
• TV might not function, if Local Set is not correctly configured. Select correct Local Set with country list provided.
Local Set change option on the
first page of HD plug&play
Select right Local Set with
country list
TV will reboot automatically to
apply new Local Set
Local Set
Local Set
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
When Local Set is Changed, TV will restart automatically to apply it.
When Local Set is Changed, TV will restart automatically to apply it.
Turn and reboot automatically
as Local Set is changed
EU
Current Localset : EU
Change
Region
Europe
OK
Countries List
Bulgria, Croatia, Czech, Estonia, Greece, Hungary, Latvia, Lithuania
Romania, Serbia, Slovakia, Slovenia, EU-Others
Skip
Country
Local Set
Bulgaria
Croatia
Czech
Estonia
Greece
Hungary
Latvia
Lithuania
Romania
Serbia
Slovakia
Slovenia
EU Others
EU
Italy
EU_ITALY
Austria
Germany
Switzerland
EU_GER
France
EU_FRANCE
Belgium
Luxembourg
Netherlands
EU_BELELUX
Portugal
Spain
EU_SPAIN
Countries List
Bulgria, Croatia, Czech, Estonia, Greece, Hungary, Latvia, Lithuania
Romania, Serbia, Slovakia, Slovenia, EU-Others
Local Set
When Local Set is Changed, TV will restart automatically to apply it.
After reboot, updated Local Set
is shown
EU_FRANCE
Countries List
France
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Local Set
Current Localset : EU_FRANCE
When Local Set is Changed, TV will restart automatically to apply it.
Change
Countries List
Austria, Germany, Switzerland
Local Set
When Local Set is Changed, TV will restart automatically to apply it.
Press Skip, general HD
plug&play will be continued
Local Set
NORDIC
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Countries List
Denmark, Finland, Norway, Sweden
United Kingdom EU_UK
Ireland
CIS
Denmark
Finland
Norway
Sweden
NORDIC
Turkey
EU_TURKEY
Poland
EU_POLAND
Kazakhstan
CIS_RUSSIA
Current Localset : EU_FRANCE
Change
Russia
Ukraine
Self Diagnosis for TV
Self Diagnosis for HTV
SW Upgrade
Service Pattern
OFF
Sound Bar Out
OFF
TV Reset
38
English
Skip
EU_GER
If you need to
change Local
Set after HD
plug&play, click TV
Reset function on
Factory mode, you
can progress HD
plug&play including
Local Set change.
Skip
Start
Interactive
(Hotel Menu)
Standalone Plug & Play
(Continue Setup)
Standalone Only
(End Setup)
If you select this, the
setup process will be
completed and go to
hotel menu.
¦¦ SW Clock
The SW Clock shows the current time on the screen when a user presses the Info remote control key in standby mode.
–– If a user presses the Info key when the TV is in standby mode, the TV is turned on and shows the current time on
the screen for 10 seconds and then returns to standby mode.
–– The time is displayed as a digital clock at the normal banner size. The 12 or 24 hour time format is determined
according to the format of the Information.
–– If a user presses the Info key when the TV is on, the original Info key function is executed.
• Detailed Descriptions
–– The SW clock works depending on the On/Off setting in the Factory install menu.
–– If the SW clock is turned on, the Fast logo option is automatically turned off. (In this case, even if you turn the Fast
logo option on again, it is automatically turned off when the TV is turned on again.)
–– If the master power is turned off, the time setting is only maintained in models with a backup condenser and an
RTC.
–– When a TV in standby mode shows the current time, the video mute and audio mute settings are maintained.
–– In this case, even if the Hotel logo is set to on, the Hotel Logo display is skipped.
–– This feature only works in StandAlone mode.
–– Other key function specifications when the SW clock is running
–– The Info key works like the power key.
–– Pressing the Power or Info key while the SW clock is running, puts the TV into Standby mode.
–– Pressing keys other than the Power and Info keys is ignored while the SW clock is running.
–– In this case, the on timer does not work.
–– The off timer and sleep timer work.
–– When clock mode in the Time menu is set to manual, the time of the sub micom is maintained by the RTC circuit.
–– Even if the current time is not configured, it is displayed in the same way as the menu. (--:--)
English
39
¦¦ Multi Code Remocon
Multi Code Remote Control is a special transmitter which is designed to control multiple TVs with one remote.
This function is useful when there is more than one TV in one location such as a hospital. The Set ID number will be
displayed in the source OSD. It is possible to support up to 9 different remote key transmission for multi code.
The initial ID code of each TV is “0”.
The ID code can be set and reset in Analog TV mode or PC mode. (not available in TTX or DTV channels)
–– The ID code can be from 0 to 9.
–– Press the RETURN + MUTE keys for longer than 7 seconds and the digit key you want to set.
–– The Set ID OSD will be displayed in a central position.
–– The following words will be displayed. “The Remote control code is set to x. If you want to change the Remote
control code. Enter the digit you want to change.” (x is the digit number) This OSD will be displayed until the exit
key is pressed.
Remote control code is set to 0. If you want
to change the Remote control code, enter the
chosen digit.
–– For example, the TV and Remote control will be set to ID code #1 if the user presses #1.
–– The following words will be displayed.“Remote control code is changed to 1”. The TV can then only be controlled
by a remote control with the same ID code as the TV.
–– If the ID code between the remote control and the TV does not match, the following words will be displayed.
“ TV ID x” (x is the TV’s ID)
–– To reset the ID code, press the EXIT + MUTE keys for longer than 7 seconds. The ID codes of both the TV and
Remote control will be reset to “0”. “Remote control code is set to 0.” will be displayed.
–– The way to set or reset the ID may differ depending on the remote control. See the table below.
¦¦ Setting the Time
OMENU → System → Time → Clock → Clock Set
• The time is entered
–– Press the remote control button to select Clock and set up the time.
Time
Clock
Sleep Timer
Off
Wake-up Timer
• Setting the Interactive Mode Time
–– If the Hotel System transmits the time information, the time is set
automatically.
–– If the Hotel System does not transmit the time information, the time
cannot be displayed.
✎✎ If the time is set, the clock will be displayed on the front panel.
40
English
Clcok
Clock Mode
Manual
•Clock Set
•Time Zone
Auto
¦¦ Channel Bank Editor (Smoovie TV Only)
Channel Bank Editor is a function to edit channels with 3 different Bank Options.
Depending on the Bank card, there are specific channels hotel customers can enjoy.
Setting the Channel Bank Editor in Stand-alone Mode
1. Enter the Hotel Standalone menu by pressing “MUTE+1+1+9+Enter”
2. Please select the SI vendor : “Smoovie”
3. You will be able to see the new menu option “Channel Bank Editor”
4. Enter “Channel Bank Editor”
Hospitality Mode
SI Vendor
Standalone
System
OFF
d
SI Vendor
Smoovie
d
Channel
d
Channel Bank Editor
<Depending on the model and region, some menu items may not exist>
5. Edit the channel bank like in the example below.
a. Bank1 (Free channel): Select the channel that will be used when the remote control has no card.
b. Bank2 (Family Card - Green): Select the channel that will be used when a remote control has a
GREEN CARD.
c. Bank3 (Adult Card - Red): Select the channel that will be used when a remote has a RED CARD.
Channel Bank Edit
Bank1 (4)
Bank2 (6)
Bank3 (36)
All
c
1
1futech
c
c
c
1
BBC1
c
c
c
2
24ore.tv
c
c
2
C3
c
c
3
BBC World
c
c
3
C5
c
c
4
Coming Soom
c
4
S2
c
n Move
E Select/Deselect
R Return
References of using SMOOVIE Remote Controller
1. If you select SMOOVIE as the SI vendor, you should use a SMOOVIE Remote Controller.
2. Using the numeric keys of the remote controller, users can only select Bank1 channels.
With this in mind, if you want to change the channel using a Green or Red Card, please use the channel up/down
keys.
3. In the Channel guide or Channel list, users can only see the Bank1 channel list.
English
41
¦¦ Channel Editor
Channel Editor edits channel number a and name.
–– Use Channel Editor to sort the channels as user-desired channel numbers.
Hospitality Mode
SI Vendor
Standalone
System
OFF
Power On
Channel
Menu OSD
Clock
Music Mode
Remote Jack Pack
External Source
r
Channel Editor
Bathroom Speaker
Eco Solution
Logo/Message
Cioning
REACH Solution
Security
<Depending on model and region, some menu items may not exist>
Simple Steps for channel Editor under Stand-alone Mode
Step
Broad Outline
1
Operate ‘Channel Auto Store’ in the Hotel Option Menu
2
Enter ‘Channel Editor’ in the Hotel Option Menu
3
Compile a table related to the final channel lists you want
4
Rearrange channels with TOOLS button based on the table you compiled
5
Press the EXIT or RETURN Button to exit.
<For better comprehension, please refer to the following details>
42
English
¦¦ My Channel
Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre,
shows the corresponding channels.
• You must select the country first, or you cannot set a genre.
• If you select the genre that not added any channels, the Channel list displays all of the available channels.
• My Channel works in Standalone mode only.
• SI Vendor in Standalone mode: This does not work if Smoovie is selected.
• This is in the Hotel Options in the Hotel Menu -> Service Mode and can be turned on or off.
• This option only works when it is set to On.
Channel Composition [Genre Mode]
Standard
Category
Ch. Mode
Genre
All (Default)
News
Radio
Entertainment
Sport
Hotel
Hotel
Antenna Mode Activation
Air/Cable
Satellite(HC675)
O
O
O
O
O
O
O
O
O
O
O
O
Description
Provide genre channel mode by each country that
master has managed in factory mode.
My Channel
Current status All Country / All
Country
Genre
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
* For the number of items to be displayed in the list, refer to the design document.
Key Guide
Button
Action
Nav. Help
BLUE
Returns to the screen. (Genre setup: Last Country & Genre)
Keep Previous
ENTER
Selects an item.
Enter
Ch. Up/Down
Move the highlight by page.
(No Guide)
UP/DOWN
Navigates the each country, genre list. (in a circular manner.)
RIGHT
Selects the highlighted item, and then move the highlight to Genre section.
RETURN
Returns to the screen. (Genre setup: Last Country & Genre)
(No Guide)
EXIT
Returns to the screen. (Genre setup: Last Country & Genre)
(No Guide)
Move
English
43
✎✎ Notes
• This section describes the layout of the Front UI that appears when the TV is turned on. (Factory Mode > Genre
Mode: Enable)
• The genre is a sub-list for each country.
• The broadcast screen that was being displayed the last memorial channel.
–– If user want to keep the previous country & genre channel map, press the ‘BLUE’, RETURN, and EXIT remotecontrol key to close the Front UI.
✎✎ Etc.
• Default Highlight : Last Memory items (Country, Genre)
• Timeout (60 sec)
Elements
No
Name
Description
1
Background Screen
Displays the last memorized channel that appears when TV is turned on.
2
Function Title
This is name of the function.
3
Current Status
Display current settings the Country/Genre.
4
Country Items
5
Genre Items
The item for the country list is displayed.
Displays the last selected country.
The item for the genre list is displayed.
Displays available genre items by each country that master managed in factory mode. (always
provide ‘All’ item)
Displays the last selected genre.
6
Highlight
If the item title is too long to be displayed within the area, Auto Text Sliding works.
7
Indicator
This is displayed when there is a previous or next page.
8
Nav. Help
The key guide is right-aligned.
44
English
Highlight Interaction [Country Items]
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
✎✎ Notes
• Users can navigate the items in each country & genre list by pressing the up or down remote control keys.
• Circular navigation is supported.
1
My Channel
My Channel
DOWN
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
OK
Cancel
UP
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
OK
Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
UP x 5
DOWN x 5
My Channel
Current status All Country / All
Country
Genre
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
DOWN
UP
UP
DOWN
My Channel
Current status All Country / All
Country
Genre
Belgium
All
China
News
Denmark
Radio
Finland
Entertainment
France
Sports
Germany
Hotel
OK
Cancel
} Keep Previous n Move E Enter
UP x N
DOWN x N
END
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
Country
Genre
South Korea
All
South Korea
All
Spain
News
Spain
News
Sweden
Radio
Sweden
Radio
Turkey
Entertainment
UK
Sports
USA
Hotel
Turkey
Entertainment
UK
Sports
USA
Hotel
OK
Cancel
} Keep Previous n Move E Enter
OK
Cancel
} Keep Previous n Move E Enter
English
45
Highlight Interaction [Default Genre]
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
ENTER / RIGHT
Genre
Country
Genre
All Country
All
All Country
All
Austria
News
Austria
News
Belgium
Radio
Belgium
Radio
China
Entertainment
China
Entertainment
Denmark
Sports
Denmark
Sports
Finland
Hotel
Finland
Hotel
OK
Cancel
LEFT
OK
Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
• The current selection of the country is high-lighted.
• Default High-light: The current selection of the genre.
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
Country
Genre
ENTER / RIGHT
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
LEFT
} Keep Previous n Move E Enter
• Seems source error, it should be read as "The other
item of the county is high-lighted.". Please verify. (ex.
France)
46
English
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
• Default Highlight : All
Mode Change Interaction 1 (1/2)
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
Country
DOWN
Genre
All Country
All
All Country
All
Austria
News
Austria
News
Belgium
Radio
Belgium
Radio
China
Entertainment
China
Entertainment
Denmark
Sports
Denmark
Sports
Finland
Hotel
Finland
Hotel
OK
Cancel
LEFT
OK
Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
• Current Genre Mode : All Country / Sports
ENTER / RIGHT
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
ENTER
Genre
Country
UP
Genre
All Country
All
All Country
All
Austria
News
Austria
News
Belgium
Radio
Belgium
Radio
China
Entertainment
China
Entertainment
Denmark
Sports
Denmark
Sports
Finland
Hotel
Finland
Hotel
OK
Cancel
DOWN
} Keep Previous n Move E Enter
OK
Cancel
} Keep Previous n Move E Enter
• If the country is selected, highlight
moves to genre menu automatically.
ENTER / RIGHT
6
English
47
Mode Change Interaction 1 (2/2)
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
1
5
6
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
Country
OK
Cancel
} Keep Previous n Move E Enter
• The genre mode change complete message is displayed.
• Timeout(5 sec.)
ENTER / RETURN / Timeout
Genre Mode changed to Aistria / News.
48
English
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
OK
Cancel
} Keep Previous n Move E Enter
• Pressing the left key from the genre to country menu
highlights an existing selected country item.
Mode Change Interaction 2 (1/2)
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
1
My Channel
My Channel
Current status All Country / All
Current status All Country / All
Country
Genre
All Country
All
Austria
News
Belgium
Radio
China
Entertainment
Denmark
Sports
Finland
Hotel
Country
DOWN X 6
OK
Cancel
UP X 6
Genre
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
} Keep Previous n Move E Enter
• Current Genre Mode : All Country / Sports
ENTER / RIGHT
5
My Channel
Current status All Country / All
Country
Genre Mode Keep All Country / All.
BLUE
/
RETURN
/
EXIT
Genre
Austria
All
Belgium
News
China
Radio
Denmark
Entertainment
Finland
Sports
France
Hotel
OK
Cancel
} Keep Previous n Move E Enter
• Current Genre Mode : All Country / Sports
• If the country is selected, highlight moves to
genre menu automatically.
English
49
Power On Scenario [Last Memory]
• This page is only to indicate possible interactions. It may not be exactly identical to actual screens.
1
Genre Mode changed to Aistria / News.
POWER
Power Off
• Current Genre Mode : Austria / News
POWER
Genre Mode changed to Aistria / News.
• Current Genre Mode : Austria / News
50
English
Genre Editor
• Country and Genre selection can be done in channel list Menu.
• Pressing Red Key enables country sub list, here viewer can scroll down and select country of choice.
• Genre selection can be done using Left/right key i.e scrolling horizontally in channel list menu.
• If viewer wants to change Genre or country in TV On state, it can be done using this feature.
Channel Genre Edit
Registered
0
C67
1
C--
2
C78
News
Radio
b Select All Items On Column
•
•
•
•
•
•
Entertainment
Sports
{ Deselect All Items On Column
Hotel
E Select
R Return
An editor to set genre for each Hotel TV channel.
Stored channels can be added to a particular genre in genre editor menu.
A channel can belong to multiple genres.
Genre Options available are : News, Radio, Entertainment, Sport, and Hotel.
Genre selection can be done either on Mychannel FrontUI or in Channel List.
This feature sorts out channels of particular genre in a list. Guest can select genre of his choice and select
channel by scrolling down sorted list.
English
51
¦¦ Mixed Channel Map
The Mixed Channel Map function mixes Air, Cable and Satellite channels
–– The Mixed Channel Map function should be ON in order to mix Air, Cable and Satellite channels.
–– Use the Channel Editor to sort the channels after turning on the 'Mixed Channel Map' function in the Hotel Option Menu
¦¦ Sound Bar
• Samsung Sound-Bar & Hospitality TV in 2014
–– Use Samsung Sound-Bar & hospitality TV support HDMI 1.4 to listen to TV sound on the Sound-Bar by using a single HDMI
cable.
–– Supporting model.
• Sound-Bar : HW-F350/F450/F550
• The “Hotel mode” operation from the Sound Bar
–– The following TV hotel options should be set in advance.
• Hotel option → Power On → Power ON Volume = "Enable" / Power ON Vol / Max Vol
• Hotel option → External Device → Sound Bar Out = "On"
–– Connect an HDMI cable from the HDMI OUT port of the Sound-BAR to the HDMI1 port of the hospitality TV.
–– After being connected to the 2014 hospitality TV via an HDMI Cable, the Sound-Bar automatically detects the TV while it turns
on, and is converted to “hotel mode” by itself.
–– The change of the power-on volume & max volume on the TV is applied to the connected sound-bar since the TV boots twice .
• Features of "Hotel Mode" in Sound Bar
––
––
––
––
––
Synchronized power on/off with the TV.
HDMI_CEC enabled.
Accessible “HDMI OUT” port only. (Other inputs are disabled)
Synchronized “power-on”&“max” volume with the TV. (The Sound-Bar’s volume is set to half that of the TV)
Adjustable “power-on”&“max” volume acquired from the TV’s hotel option menu. (Sound-Bar volume=TV volume/2)
Ex.) If the volume settings on the TV are “power-on volume=20 and max volume=90”, the Sound bar will work as power-on
volume=10, max volume=45.
*This function may differ depending on the model.
52
English
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall
mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall
mount bracket. We do not advise you to do it yourself.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to
install the TV on your own.
Wall Mount Kit Specifications (VESA)
✎✎ The Wall mount kit is not supplied but sold separately.
Install your wall mount on a solid wall, perpendicular to the floor. When attaching to other building materials, please
contact your nearest dealer. If installing on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎ NOTE
• Standard dimensions for wall mount kits are shown in the table below.
• When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are
provided.
• Do not use screws that do not comply with VESA standard screw specifications.
• Do not use screws longer than the standard dimensions, as they may cause damage to the inside of the TV set.
• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on their specifications.
• Do not fasten the screws too tightly. This may... damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.
• Do not exceed a 15 degrees tilt when mounting this TV.
inches
VESA Spec. (A * B)
22
75 x 75
28
100 x 100
32~40
200 X 200
46~48
400 X 400
Standard Screw
Quantity
M4
4
M8
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
English
53
Securing the TV to the Wall
[
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or
destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on
the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
To avoid the TV from falling
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly
installed onto the wall.
✎✎ You may need additional material, such as an anchor, depending on the type of wall.
✎✎ Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.
2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto
the TV again.
✎✎ Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string
tightly.
✎✎ NOTE
• Install the TV near to the wall so that it does not fall backwards.
• It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on
the TV.
• Untie the string before moving the TV.
4. Verify that all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you
have any doubt about the security of your connections, contact a professional installer.
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically
fix the system when using it in a public place. The appearance and locking
method may differ from the illustration, depending on the manufacturer. Refer to
the manual provided with the Kensington Lock for additional information on proper
use.
To lock the product, follow these steps:
Please find the “K” icon on the rear of the TV. A kensington slot is beside the
“K” icon.
1
<Optional>
1. Wrap the Kensington lock cable around a large, stationary object such as
desk or chair.
2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable.
3. Insert the locking device into the Kensington slot on the product (1).
4. Lock the lock.
✎✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎✎ The locking device has to be purchased separately.
✎✎ The location of the Kensington Lock may be different depending on the model.
54
English
Specifications
Items
Speaker out
22inch : 3W x 2;28 inch : 5W X 2
The HG32*C470 is 5W X 2,
the other is 32 inch of 10W X 2
40inch / 46inch / 48inch : 10W X 2
Audio out
DATA
Comment
PAL,SECAM DVB-TC,DTMB
(HongKong),DVB-T2CS2
TV System
Input
Specification
Variable Audio
4W mono 8 ohm SPK'
PC
D-sub, Audio-L/R
A/V
Audio Video Jack
HDMI
Compatible with the HDMI Specifications
Antenna
75 ohm Unbalanced, Din Jack , F Jack
DATA
RJ-12
RJP
RS232
Swivel (Left / Right)
HG***C670: 20˚/ 60˚/ 90˚
HG**EC770: 20˚
Operating temperature
10°C ~ 40°C (50°F ~ 104°F)
Operating Humidity
10% ~ 80%
Storage Temperature
-20°C ~ 45°C (-4°F ~ 113°F)
Storage Humidity
5% ~ 95%
Phone Jack output
BTL Sound output
Other models don't support swivel function
non-condensing
non-condensing
✎✎ Design and specifications are subject to change without prior notice.
✎✎ For information about the power supply, and more information about the power consumption, refer to the label attached to the product.
✎✎ The above specifications may differ depending on the model.
English
55
Supported Video Formats
File Extention
Container
Video Codec
DivX 3.11/4.x/5.x/6.x
*.avi / *.mkv
*.asf / *.wmv
*.mp4 / *.3gp
*.vro / *.mpg
*.mpeg / *.ts
*.tp / *.trp
*.mov / *.flv
*.vob / *.svi
*.divx
AVI
MKV
ASF
MP4
3GP
MOV
FLV
VRO
VOB
PS
TS
*.webm
WebM
MPEG4 SP/ASP
Resolution
Frame rate(fps)
Bit rate(Mbps)
1920 x 1080
30
640 x 480
8
Audio Codec
AC3
LPCM
ADPCM
(IMA, MS)
AAC
HE-AAC
WMA
DD+
MPEG (MP3)
DTS (Core)
G.711(A-Law,
μ-Law)
Vorbis
H.264 BP/MP/HP
Motion JPEG
Window Media Video v9
MPEG2
MPEG1
6~30
30
1920 x 1080
VP8
20
✎✎ Other Restrictions
• Video content will not play, or not play correctly, if there is an error in the content or the container.
• Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec
listed in the table.
• If the Index Table is in error, the Seek (Jump) function is not supported.
• Some USB/digital camera devices may not be compatible with the player.
• The menu can be displayed late if the video is over 10Mbps(bit rate).
Video decoder
Audio decoder
• Supports up to H.264, Level 4.1 (FMO/ASO/RS are not supported.)
• frame rate :
−− Below 1280 x 720: 60 frame max
−− Above 1280 x 720: 30 frame max
• VC1 AP L4 is not supported.
• GMC is not supported.
•
•
•
•
WMA 10 Pro supports up to 5.1 channel and M2 profile.
WMA lossless audio is not supported.
Vorbis supports up to 2ch.
DD+ supports up to 5.1 channel.
Supported Subtitle Formats
• Internal
• External
Name
File extension
Name
Container
ormat
MPEG-4 timed text
.ttxt
Xsub
AVI
Picture Format
SAMI
.smi
SubStation Alpha
MKV
Text Format
SubRip
.srt
SubViewer
.sub
Advanced SubStation
Alpha
MKV
Text Format
Micro DVD
.sub or .txt
SubRip
MKV
Text Format
SubStation Alpha
.ssa
MPEG-4 timed text
MP4
Text Format
Advanced SubStation Alpha
.ass
Powerdivx
.psb
Supported Music Formats
Supported Photo Formats
File Extension
Type
Resolution
*.jpg
*.jpeg
JPEG
15360 X 8640
*.bmp
BMP
4096 X 4096
*.mpo
MPO
15360 X 8640
File Extension
Type
*.mp3
MPEG
*.m4a
*.mpa
*.aac
*.flac
*.ogg
*.wma
*.wav
*.mid
*.midi
56
English
Codec
MPEG1 Audio
Layer 3
MPEG4
AAC
FLAC
OGG
FLAC
Vorbis
WMA
WMA
wav
wav
midi
midi
Remark
Can support up to 2channel
Can support up to 2channel
WMA 10 Pro supports up to
5.1 channel and M2 profile.
(WMA lossless audio is not
supported.)
Can not support seeking
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
AUSTRIA
0800-SAMSUNG (0800-7267864)
[Only for Dealers] 0810-112233
www.samsung.com/at/support
BELGIUM
02-201-24-18
www.samsung.com/be/support (Dutch)
www.samsung.com/be_fr/support (French)
BOSNIA
055 233 999
www.samsung.com/support
BULGARIA
*3000 Цена в мрежата
0800 111 31, Безплатна телефонна линия
www.samsung.com/bg/support
CROATIA
072 726 786
www.samsung.com/hr/support
CZECH
800 - SAMSUNG (800-726786)
www.samsung.com/cz/support
Samsung Electronics Czech and Slovak, s.r.o. V Parku 2323/14, 148 00 - Praha 4
DENMARK
70 70 19 70
www.samsung.com/dk/support
FINLAND
030-6227 515
www.samsung.com/fi/support
FRANCE
01 48 63 00 00
www.samsung.com/fr/support
GERMANY
www.samsung.com/de/support
0180 6 SAMSUNG bzw.
0180 6 7267864*
(*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk
max. 0,60 €/Anruf)
CYPRUS
8009 4000 only from landline, toll free
GREECE
80111-SAMSUNG (80111 726 7864) only from land line
(+30) 210 6897691 from mobile and land line
www.samsung.com/gr/support
HUNGARY
0680SAMSUNG (0680-726-786)
0680PREMIUM (0680-773-648)
www.samsung.com/hu/support
ITALIA
800-SAMSUNG (800.7267864)
www.samsung.com/it/support
LUXEMBURG
261 03 710
www.samsung.com/be_fr/support
MONTENEGRO
020 405 888
www.samsung.com/support
SLOVENIA
080 697 267 (brezplačna številka)
www.samsung.com/si/support
NETHERLANDS
088 90 90 100
www.samsung.com/nl/support
NORWAY
815 56480
www.samsung.com/no/support
POLAND
801-172-678* lub +48 22 607-93-33*
* (koszt połączenia według taryfy operatora)
www.samsung.com/pl/support
PORTUGAL
808 20 7267
www.samsung.com/pt/support
ROMANIA
*8000 (apel in retea)
08008-726-78-64 (08008-SAMSUNG) Apel GRATUIT
www.samsung.com/ro/support
SERBIA
011 321 6899
www.samsung.com/rs/support
SLOVAKIA
0800 - SAMSUNG (0800-726 786)
www.samsung.com/sk/support
SPAIN
34902172678
www.samsung.com/es/support
SWEDEN
0771 726 7864 (0771-SAMSUNG)
www.samsung.com/se/support
SWITZERLAND
0800 726 78 64 (0800-SAMSUNG)
www.samsung.com/ch/support (German)
www.samsung.com/ch_fr/support (French)
UK
0330 SAMSUNG (7267864)
www.samsung.com/uk/support
EIRE
0818 717100
www.samsung.com/ie/support
LITHUANIA
8-800-77777
www.samsung.com/lt/support
LATVIA
8000-7267
www.samsung.com/lv/support
ESTONIA
800-7267
www.samsung.com/ee/support
TURKEY
444 77 11
www.samsung.com/tr/support
© 2014 Samsung Electronics Co., Ltd. All rights reserved.
Download PDF

advertising