Samsung | LE40A615A3F | Samsung LE40A615A3F Benutzerhandbuch

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country
Customer Care Centre
Web Site
AUSTRIA
BELGIUM
0800-SAMSUNG (726-7864)
0032 (0)2 201 24 18
844 000 844
www.samsung.com/at
www.samsung.com/be
www.samsung.com/cz
CZECH REPUBLIC
Distributor pro Českou republiku:
Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4
DENMARK
EIRE
FINLAND
70 70 19 70
0818 717 100
030-6227 515
www.samsung.com/dk
www.samsung.com/ie
www.samsung.com/fi
FRANCE
3260 SAMSUNG (€ 0,15/Min)
08 25 08 65 65 (€ 0,15/Min)
www.samsung.com
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
01805 - SAMSUNG (726-7864) (€ 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
0035 (0)2 261 03 710
0900-SAMSUNG (726-7864) (€ 0,10/Min)
815-56 480
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/be
www.samsung.com/nl
www.samsung.com/no
POLAND
0 801 801 881
022-607-93-33
www.samsung.com/pl
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
SWITZERLAND
U.K
TURKEY
ESTONIA
LATVIA
LITHUANIA
KAZAHSTAN
KYRGYZSTAN
RUSSIA
TADJIKISTAN
UKRAINE
UZBEKISTAN
80820-SAMSUNG (726-7864)
0800-SAMSUNG (726-7864)
902 10 11 30
0771-400 200
0800-SAMSUNG (726-7864)
0845 SAMSUNG (7267864)
444 77 11
800-7267
800-7267
8-800-77777
8-10-800-500-55-500
00-800-500-55-500
8-800-555-55-55
8-10-800-500-55-500
8-800-502-0000
8-10-800-500-55-500
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com
www.samsung.com/se
www.samsung.com/ch
www.samsung.com
www.samsung.com
www.samsung.ee
www.samsung.com/lv
www.samsung.lt
www.samsung.kz
www.samsung.ru
www.samsung.com
www.samsung.uz
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model
Serial No.
BN68-01604R-00
BN68-01604R-00L08-Cover.indd 1
2008-06-23 ¿ÀÈÄ 5:13:30
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre. (See back cover for more informations.)
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
•Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image
retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the
degree of brightness and contrast of the screen when displaying a still image.
•
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders
displayed on the left, right and center of the screen caused by the difference of light emission on
the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages
caused by the above effect are not covered by the Warranty.
•Displaying still images from Video games and PC for longer than a certain period of time may produce
partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01604R-00Eng-0601.indd 1
2008-06-24 ¿ÀÈÄ 4:32:35
English
Contents
Connecting and Preparing Your TV
 List of Parts......................................................... 3
 Installing the Stand.............................................. 3
 Installing the Wall Mount Kit................................ 3
 Viewing the Control Panel................................... 4
 Viewing the Connection Panel............................ 5
 Viewing the Remote Control............................... 8
 Installing Batteries in the Remote Control........... 9
 Switching On and Off.......................................... 9
 Placing Your Television in Standby Mode........... 9
 Viewing the Menus............................................ 10
 Using the TOOLS Button.................................. 10
 Plug & Play........................................................ 11
Setting the Channels
 Storing Channels Automatically........................ 12
 Storing Channels Manually............................... 13
 Adding / Locking Channels............................... 14
 Sorting the Stored Channels............................. 15
 Assigning Channels Names.............................. 15
 Fine Tuning Channel Reception........................ 16
 LNA (Low Noise Amplifier)................................ 16
Setting the Picture
 Changing the Picture Standard......................... 17
 Adjusting the Custom Picture............................ 18
 Configuring Detailed Settings on the Picture.... 18
 Resetting the Picture Settings to the Factory
Defaults............................................................. 19
 Configuring Picture Option................................ 20
 Viewing the Picture In Picture (PIP).................. 22
Setting the Sound
 Sound Features................................................. 23
 Selecting the Sound Mode................................ 24
 Connecting Headphones (Sold separately)...... 24
Function Description
 Choosing Your Language................................. 26
 Melody / Entertainment / Energy Saving . ........ 27
 Selecting the Source......................................... 28
 Editing the Input Source Names....................... 29
USING The DTV FeATuRe
 Previewing the DTV Menu System................... 30
 Updating the Channel List Automatically.......... 31
 Updating the Channel List Manually................. 31
 Editing Your Favourite Channels...................... 32
 Selecting Channel List...................................... 34
 Displaying Programme Information................... 34
 Viewing the EPG (Electronic Programme Guide)
Information........................................................ 35
 Using the Scheduled List.................................. 36
 Setting the Default Guide.................................. 36
 Viewing All Channels and Favourite Channels 37
 Adjusting the Menu Transparency.................... 37
 Setting up the Parental Lock............................. 38
 Setting the Subtitle............................................ 39
 Setting the Subtitle Mode.................................. 39
 Selecting the Audio Format............................... 39
 Selecting the Audio Description........................ 40
 Selecting the Digital Text (UK only).................. 40
 Selecting the Time Zone (Spain only)............... 41
 Viewing Product Information............................. 41
 Checking the Signal Information....................... 42
 Upgrading the Software.................................... 42
 Viewing Common Interface............................... 43
 Selecting the CI (Common Interface) Menu...... 43
 Resetting........................................................... 44
 Selecting the Preferred Language
(Subtitle , Audio or Teletext).............................. 44
 Preference......................................................... 45
Setting the Time
 Setting and Displaying the Current Time.......... 25
 Setting the Sleep Timer..................................... 25
 Switching the Television On and Off
Automatically..................................................... 26
English - 1
BN68-01604R-00Eng-0601.indd 1
2008-06-24 ¿ÀÈÄ 4:32:35
Setting the PC
Recommendations For Use
 Setting up Your PC Software
(Based on Windows XP)................................... 46
 Display Modes................................................... 46
 Setting up the TV with your PC......................... 47
WISELINK
 Using the WISELINK Function.......................... 48
 Using the WISELINK Menu............................... 49
 Using the PHOTO (JPEG) List.......................... 50
 Using the MP3 List............................................ 53
 Using the Setup Menu....................................... 54
 Teletext Feature................................................ 61
 Auto Wall-Mount (Sold separately)................... 63
 Using the Anti-Theft Kensington Lock
(depending on the model)................................. 64
 Securing the TV to the Wall.............................. 65
 Troubleshooting: Before Contacting Service
Personnel.......................................................... 66
 Technical and Environmental Specifications . .. 67
About Anynet+
 What is Anynet+? ............................................. 55
 Connecting Anynet+ Devices............................ 55
 Setting Up Anynet+........................................... 56
 Scanning and Switching between Anynet+
Devices............................................................. 57
 Recording.......................................................... 59
 Listening through a Receiver............................ 59
 Check Points before Requesting Service.......... 60
Symbol
Press
Note
One-Touch
Button
English - 2
BN68-01604R-00Eng-0601.indd 2
2008-06-24 ¿ÀÈÄ 4:32:35
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
M4 X L16
Remote Control
& Batteries
(AAA x 2)
Power Cord
• Owner’s Instructions
➣
➣
Cover-Bottom
Stand Screw
X4
• Warranty card
• Safety Guide
Stand
Cleaning Cloth
• Registration Cards
Warranty card / Safety Guide / Registration Cards (Not available in all locations)
The stand and stand screw may not be included depending on the model.
Installing the Stand
1. Connect your LCD TV and the stand.
➣ Two or more people should carry the TV.
➣ Make sure to distinguish between the front and back of the stand when assembling them.
2. Fasten two screws at position 1 and then fasten two screw at position 2.
➣ Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed
down, it may lean to one side.
➣ The stand is installed for models with the screen size of 37 inch and above.
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the
TV on the wall.
For detailed information on installing the wall mount,
see the instructions provided with the Wall Mount items.
Contact a technician for assistance when installing the
wall mounted bracket.
Samsung Electronics is not responsible for any damage
to the product or injury to yourself or others
if you elect to install the TV on your own.
Do not install your Wall Mount Kit while your TV is
turned on. It may result in personal injury due to
electric shock.
➣ Remove the stand and cover the bottom hole with a
cap and fasten with two screws.
English - BN68-01604R-00Eng-0601.indd 3
2008-06-24 ¿ÀÈÄ 4:32:37
Viewing the Control Panel
1
2
3
4
5
6
8
7 8
Front Panel buttons
Touch each button to
operate.
➣
The product colour and shape may vary depending on the model.
1 SOURCE
Toggles between all the available input sources
(TV, Ext.1, Ext.2, AV, S-Video, Component, PC,
HDMI1, HDMI2, HDMI3, DTV). In the on-screen
menu, use this button as you use the ENTER
button on the remote control.
5 Power Indicator
Blinks and turns off when the power is on and
lights up in stand-by mode.
6
(Power)
Press to turn the TV on and off.
2 MENU
Press to see an on-screen menu of your TV’s
features.
7 Remote Control Sensor
Aim the remote control towards this spot on the TV.
3
8 Speakers
Press to decrease or increase the volume. In the
on-screen menu, use the
buttons as you
use the ◄ and ► buttons on the remote control.
4
Press to change channels.
In the on-screen menu, use the
buttons as you use the ▼ and ▲ buttons on the remote control.
(Without the Remote Control, you can turn on the TV by using the Channel buttons.)
English - BN68-01604R-00Eng-0601.indd 4
2008-06-24 ¿ÀÈÄ 4:32:38
Viewing the Connection Panel
[Side Panel Jacks]
1
2
3
4
5
6
3
7
8
#
@
Power Input
!
0
9
The product colour and shape may vary depending on the model.
➣
➣
Whenever you connect an external device to your TV, make sure that power on the unit is turned off
When connecting an external device, match the colour of the connection terminal to the cable.
1 PC IN [PC] / [AUDIO]
- Connect to the video and audio output jack on your PC.
2 COMPONENT IN
- Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box
to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on
your set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,
B-Y and R-Y or Y, Cb and Cr.
- Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
3HDMI IN 1, HDMI IN 2, HDMI IN 3
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
- When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
English - BN68-01604R-00Eng-0601.indd 5
2008-06-24 ¿ÀÈÄ 4:32:38
➣
What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio.
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate
cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller
in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and
supports multi - channel digital audio.
➣ The TV may not output sound and pictures may be displayed with abnormal colour when DVD
players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected.
When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the
HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of
the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite
receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not
1.3 may cause annoying flicker or no screen display.
DVI IN(HDMI2) [R-AUDIO-L]
- DVI audio outputs for external devices.
➣ Supported modes for HDMI/DVI and Component
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
480i
480p
576i
576p
720p
1080i
1080p
X
X
O
X
O
O
X
X
O
O
X
O
O
O
O
O
O
O
O
O
O
4 ANT IN
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
5 SERVICE
- Connector for SERVICE only.
- Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV
viewing angle using your remote control.
6 COMMON INTERFACE Slot
- When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and other information
will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service
provider.
- When the channel information configuration has finished, the message "Updating Completed" is
displayed, indicating that the channel list is now updated.
➣ You must obtain a CI CARD from a local cable service
provider. Remove the CI CARD by carefully pulling it out
with your hands since dropping the CI CARD may cause
damage to it.
➣ Insert the CI-Card in the direction marked on it.
➣
The place of the COMMON INTERFACE Slot may be
different depending on its model.
7 WISELINK
- Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3)
English - BN68-01604R-00Eng-0601.indd 6
2008-06-24 ¿ÀÈÄ 4:32:38
8 S-VIDEO or VIDEO / R-AUDIO-L
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to "R-AUDIO-L" on your set and the other ends to corresponding audio
out connectors on the A/V device.
9Headphones jack
- Headphone may be connected to the headphone output on your set. While the head phone is
connected, the sound from the built-in speakers will be disabled.
0 AUDIO OUT [R-AUDIO-L]
- Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to
corresponding audio in connectors on the Amplifier or DVD Home Theatre.
! DIGITAL AUDIO OUT (OPTICAL)
- Connect to a Digital Audio Component.
➣ When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV
outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the Optical jack on
the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV.
@ EXT 1, EXT 2
Connector
EXT 1
EXT 2
Video
O
O
Input
Audio (L/R)
O
O
RGB
O
Output
Video + Audio (L/R)
Only TV or DTV output is available.
Output you can choose.
- Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
# Kensington Lock (depending on the model)
- The Kensington Lock (optional) is a device used to physically fix the system when used in a public place.
- If you want to use a locking device, contact the dealer where you purchased the TV.
- The location of the Kensington Lock may be different depending on its model.
English - BN68-01604R-00Eng-0601.indd 7
2008-06-24 ¿ÀÈÄ 4:32:38
Viewing the Remote Control
1 Television Standby button
2 Selects the TV and DTV mode directly
3��������������������������
Number buttons for direct
channel access
4 One/Two-digit channel
selection
5 + : Volume increase
– : Volume decrease
6���������������������������
Available source selection�
7��������������������������
Electronic Program Guide (EPG) display
8����������������������
Use to quickly select
frequently used functions.
9���������������������������
Use to see information on the current broadcast
0����������������
Colour buttons :
Use these buttons in
the Channel list and
WISELINK, etc.
@�����������������������������
Press to select the optional
display and sound modes
for sports, cinema and
games.
#���������������������
Use these buttons in
the DMA, WISELINK
and Anynet+. (
: This
remote can be used
to control recording on
Samsung recorders with
the Anynet+ feature)
$ Press to backlight the
buttons on the remote.
This function is convenient
for using at night or when
the room is dark. (Using
the remote control with the
ON/OFF button set to
On will reduce the battery
usage time.)
% Previous channel
^�����������������������
Temporary sound switchoff
& P : Next channel
P : Previous channel
*���������������������
Displays the main onscreen menu
➣
(��������������������������
This function enables you
to view and play photo
and music files from an
external device.
)�����������������������
Returns to the previous
menu
a��������������������������
Control the cursor in the
menu
b�����������������������
Exit the on-screen menu
cUse this when connecting
a SAMSUNG DMA
(Digital Media Adapter)
device through an HDMI
interface and switching
to DMA mode. (The DMA
button is optional.) For
more information on the
operating procedures,
refer to the user manual
of the DMA. This button
is available when
“Anynet+(HDMI-CEC)" is
“On” (see page 56)
d�����������������������
Picture size selection�
e������������������������
Digital subtitle display
f��������������������������
It display "Channel List"
on the screen.
Teletext Functions
2Exit from the teletext display
6Teletext mode selection (LIST/FLOF)
7Teletext store
8Teletext size selection
9Teletext reveal
0Fastext topic selection
!Alternately select Teletext, Double, or Mix.
%Teletext sub page
&P : Teletext next page
P : Teletext previous page
*Teletext index
)Teletext hold
bTeletext cancel
The performance of the remote control may be affected by bright light.
English - BN68-01604R-00Eng-0601.indd 8
2008-06-24 ¿ÀÈÄ 4:32:39
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
➣ Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.
3. Replace the cover.
➣ Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time.
➣ Using the remote control with the
ON/OFF button set to On will
reduce the battery usage time.
➣
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
➣ The standby indicator lights up on your set.
2. Press the P button on your set.
➣ You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on.
➣ The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control or
button on your set.
➣ When you switch the set on for the very first time, you will be asked to choose language in which the
menus are to be displayed.
4. To switch your set off, press the POWER button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby
mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
➣ The screen is turned off and a red standby indicator appears on your set.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or
channel up/down ( / ) button again.
➣ Do not leave your set in standby mode for long periods of time (when you are away on holiday, for
example).
It is best to unplug the set from the mains and aerial. English - BN68-01604R-00Eng-0601.indd 9
2008-06-24 ¿ÀÈÄ 4:32:39
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side
has icons: Picture, Sound, Channel, Setup, Input, Digital Menu.
2. Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s submenu.
3. Press the EXIT button to exit.
➣ The on-screen menus disappear from the screen after
about one minute.
TV
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G50
R50
Detailed Settings 
sMore
Move Enter
Return
Using the TOOLS Button
You can use the TOOLS button to select your frequently
used functions quickly and easily. The “Tools” menu change
depending on which external input mode you are viewing.
1. Press the TOOLS button.
The “Tools” menu will appear.
2. Press the ▲ or ▼ button to select a menu.
3. Press the ▲/▼/◄/►/ENTER buttons to display, change, or
use the selected items. For a more detailed description of each
function, refer to the corresponding page.
Tools
Anynet+ (HDMI-CEC)
Picture Mode Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
:
Off
:
Off
:
Off
:
Mono
Enter
e Exit
♦ Anynet+ (HDMI-CEC), see page 56
♦ Picture Mode, see page 17
♦ Sound Mode, see page 23
♦ Sleep Timer, see page 25
♦ SRS TS XT, see page 23
♦ Energy Saving, see page 28
♦ Dual l-ll, see page 24
♦ PIP, see page 22
♦ Auto Adjustment, see page 47
English - 10
BN68-01604R-00Eng-0601.indd 10
2008-06-24 ¿ÀÈÄ 4:32:41
Plug & Play
When the TV is initially powered on, several basic settings
proceed automatically and subsequently. The following
settings are available.
Plug & Play
➣
Any functions related to Digital TV (DVB) will only work in
Start Plug & Play.
countries or areas where DVB-T (MPEG2) digital terrestrial
OK
signals are broadcasted. Please confirm with your local dealer
if you can receive DVB-T signals. Although this TV set follows
the DVB-T specification, maintaining compatibility with the future
Enter
coming DVB-T digital terrestrial broadcasts is not guaranteed.
Several functions may not be available in some countries.
1. Press the POWER button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.
➣ We recommend setting the TV to "Home Use" mode for the best picture in your home
environment.
➣ "Store Demo" mode is only intended for use in retail environments.
➣ If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”
(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and
hold the MENU button on the TV for 5 seconds.
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER button.
➣ Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
6.The message “Some DTV functions may not be available. Digital Scan?” is displayed.
Press the ◄ or ► button to select “Yes” or “No”, then press the ENTER button.
♦ Yes: First an ATV search is performed and then a DTV ch. auto search is performed.
♦ No: Only an ATV search is performed.
➣
his function is supported for all countries except for the following countries: France, Germany,
T
Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria.
7. The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER button.
➣ The channel search will start and end automatically.
The DTV channel scan menu appears and the DTV channel is automatically updated.
➣ If the DTV channel is updated, the Source in the source list of the Input menu is automatically
changed to DTV. After all the available channels are stored, the "Clock Set" menu appears.
➣ Press the ENTER button at any time to interrupt the memorization process.
➣ For detailed descriptions about DTV channel update, refer to page 31 of this manual.
After all the available digital channels are stored, the screen to select a time zone is displayed
depending on the country.
8. Press the ENTER button.
Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ◄ or ► button.
Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ▲ or ▼ button.
➣ You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons
on the remote control.
English - 11
BN68-01604R-00Eng-0601.indd 11
2008-06-24 ¿ÀÈÄ 4:32:41
9.Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed.
When you have finished, press the ENTER button.
➣ Even if the ENTER button is not pressed, the message will automatically disappear after
several seconds.�
♦ Language: Select your language.
♦ Country: Select your country.
♦ Auto Store: Automatically scans for and stores channels available in the local area.
♦ Clock Set: Sets the current time for the TV clock.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ENTER button again, to select "Plug & Play".
For further details on setting up options, refer to the page 11.
➣ The “Plug & Play” feature is only available in the TV mode.
TV
Setup
Plug & Play 
Language
:English 
Time 
Auto Wall-Mount 
Melody
: Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
Move Enter
Return
Plug & Play
Start Plug & Play.
OK
Enter
- Storing Channels Automatically
- Storing Channels Manually
Storing Channels Automatically
Return
Enter
Return
Channel
TV
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
: Off 
Move Enter
Return
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to
watch.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
2. Press the ENTER button to select "Country".
3. Select the appropriate country by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
➣ Even though you have changed the country setting in this menu, the country setting for DTV is not
changed. (Refer to page 31)
4. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER button.
5. Press the ENTER button.
➣ The TV will begin memorizing all of the available channels.
➣ Press the ENTER button at any time to interrupt the memorization process and return to the "Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (refer to page 15)
English - 12
BN68-01604R-00Eng-0601.indd 12
2008-06-24 ¿ÀÈÄ 4:32:43
Storing Channels Manually
➣
Not available in DTV or external input mode.
You can store television channels, including those received via
cable networks.
When storing channels manually, you can choose:
♦ Whether or not to store each of the channels found.
♦ The programme number of each stored channel which you
wish to identify.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2.Press the ▲ or ▼ button to select "Manual Store", then press
the ENTER button.
3.Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
4.When you are satisfied with your setting, press the
ENTER button.
5. Press the EXIT button to exit.
Channel
TV
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
: Off 
Move TV
Enter
Return
Manual Store
Programme Colour System Sound System Channel Search Store Move :P2
: Auto 
: BG 
:C3
: 77 MHz
:?
Enter
Return
♦ Programme (Programme number to be assigned to a channel)
- Press the ▲ or ▼ button until you find the correct number.
➣ You can also select the channel number directly by pressing the numeric buttons (0~9).
♦ Colour System: Auto/PAL/SECAM/NTSC4.43
- Press the ▲ or ▼ button to select the required colour standard.
♦ Sound System: BG/DK/I/L
- Press the ▲ or ▼ button to select the required sound standard.
♦ C
hannel (When you know the number of the channel to be stored)
- Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
- Press the ► button, then press the ▲ or ▼ button to select the required number.
➣ You can also select the channel number directly by pressing the numeric buttons (0~9).
➣ If there is abnormal sound or no sound, re-select the sound standard required.
♦ Search (When you do not know the channel numbers)
- Press the ▲ or ▼ button to start the search.
- The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
♦ Store (When you store the channel and associated programme number)
- Set to "OK" by pressing the ENTER button.
➣ Channel mode
- P (Programme mode): When completing tuning, the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
- C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
- S (Cable channel mode): You can select a channel by entering the assigned number for each cable
channel in this mode.
English - 13
BN68-01604R-00Eng-0601.indd 13
2008-06-24 ¿ÀÈÄ 4:32:45
Adding / Locking Channels
➣
Not available in DTV or external input mode.
Using the Channel Manager, you can conveniently lock or add
channels.
Channel
TV
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
: Off 
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Channel Manager", then
press the ENTER button.
♦ Adding channels
Using the Channel List, you can add channels.
3. Select Channel List by pressing the ENTER button.
4.Move to the ( ) field by pressing the ▲, ▼, ◄ or ►
button, select a channel to be added, and press the
ENTER button to add the channel.
➣ If you press the ENTER button again, the ( ) symbol
next to the channel disappears and the channel is not added.
➣ " " is active when "Child Lock" is selected to "On".
♦ Locking channels
This feature allows you to prevent unauthorized users, such as
children, from watching unsuitable programmes by muting out
video and audio.
5. Press the ▲ or ▼ button to select "Child Lock", then press the
ENTER button.
6.Select "On" by pressing the ▲ or ▼ button, then press the
ENTER button.
7. Press the ▲ or ▼ button to select "Channel List", then press
the ENTER button.
8.Move to the " " field by pressing the ▲, ▼, ◄ or ► button,
select a channel to be locked, and press the ENTER
button.
➣ If you press the ENTER button again, the ( ) symbol
next to the channel disappears and the channel lock is
cancelled.
➣ A blue screen is displayed when "Child Lock" is activated.
9. Press the EXIT button to exit.
➣ Select "On" or "Off" in "Child Lock" to easily turn the
channels which selected on " " to be active or inactive.
Move Enter
Return
Channel Manager
Channel List 
Child Lock
: Off 
TV
Move Enter
Return
Channel List
P 1 C3
1 / 10
Prog.
0
C--
1
C3
2
BBC 1
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Add
Lock
Move
Enter
Page
Return
You can select these options by simply pressing the CH LIST button on the remote control.
English - 14
BN68-01604R-00Eng-0601.indd 14
2008-06-24 ¿ÀÈÄ 4:32:47
Sorting the Stored Channels
This operation allows you to change the programme numbers
of the stored channels.
This operation may be necessary after using the auto store.
TV
➣
Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Sort", then press the ENTER button.
3. Select the channel number that you wish to change by
pressing the ▲ or ▼ button.
Press the ENTER button.
➣ The selected channel number and name are moved to right
side.
4. Select the number of the programme to which the channel is to
be moved by pressing the ▲ or ▼ button.
5. Press the ENTER button. The channel is moved to its new
position and all other channels are shifted accordingly.
6. Repeat steps 3 to 5 for another channel to be sorted.
7. Press the EXIT button to exit.
Channel
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
: Off 
Move TV
Enter
Return
Sort
Prog.
0
1
2
3
4
Ch. Name

C-C23

C16
C3
S1

Move Enter
Return
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed,
allowing you to assign new names.
TV
➣
Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Name", then press the
ENTER button.
3. If necessary, select the channel to be assigned to a new
name by pressing the ▲ or ▼ button. Press the ENTER
button.
➣ The selection bar is displayed around the name box.
4. To...
Then...
Select a letter, number or symbol Press the ▲ or ▼ button
Move on the next letter
Press the ► button
Move back the previous letter
Press the ◄ button
Confirm the name
Press the ENTER
Channel
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
: Off 
Move Enter
Return
Name
TV
Prog.
0
1
2
3
4
Ch.

C--
C23
C16
C3
S1

Move Name
---------
------------Enter
Return
button
➣
The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special
characters (+, -, *, /, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
English - 15
BN68-01604R-00Eng-0601.indd 15
2008-06-24 ¿ÀÈÄ 4:32:51
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for
optimal reception.
➣ Not available in DTV or external input mode.
1. Use the number buttons to directly select the channel that you want to fine tune.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button.
4. Press the ◄ or ► button to adjust the fine tuning.
Press the ENTER button.
5. Press the EXIT button to exit.
➣ Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.
➣ To reset the fine-tuning, select "Reset" by pressing the ▲ or ▼
button and then press the ENTER button.
TV
Channel
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
: Off 
Move Enter
Return
Fine Tune
P1
0
Reset
Adjust Save
Return
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, the LNA function
can improve the reception (a low-noise preamplifier boosts the
incoming signal).
➣ Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "LNA", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "Off" or "On". Press the
ENTER button.
4. Press the EXIT button to exit.
TV
Channel
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
: Off 
TV
Move Enter
Return
Channel
Country
:United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
: Off Off On
Move Enter
Return
English - 16
BN68-01604R-00Eng-0601.indd 16
2008-06-24 ¿ÀÈÄ 4:32:54
Changing the Picture Standard
You can select the type of picture which best corresponds to
your viewing requirements.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button again, to select "Mode".
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the ENTER button.
4. Press the EXIT button to exit.
♦ Dynamic: Selects the picture for high-definition in a bright
room.
♦ Standard: Selects the picture for optimum display in a
normal environment.
♦ Movie: Selects the picture for comfortable display in a dark
room.
➣
The Picture mode must be adjusted separately for each input
source.
Easy Setting
1. Press the TOOLS button on the remote control.
2.Press the ▲ or ▼ button to select “Picture Mode”.
3.Press the ◄ or ► button to select the desired picture mode.
4. Press the EXIT or TOOLS button to exit.
TV
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G50
R50
Detailed Settings 
sMore
TV
Move Enter
Return
Picture
Dynamic Mode
:Standard
Standard 7
Backlight
Movie 95
Contrast
Brightness 45
Sharpness 50
Colour 50
Tint
G50
R50
Detailed Settings sMore
Move Enter
Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move ◄ Standard
: Custom
:
Off
:
Off
:
Off
:
Mono
Adjust
►
e Exit
English - 17
BN68-01604R-00Eng-0601.indd 17
2008-06-24 ¿ÀÈÄ 4:32:56
Adjusting the Custom Picture
Your set has several settings which allow you to control picture
quality.
1. To select the desired picture effect, follow the "Changing the
Picture Standard" instructions number 1 to 3. (On page 17).
2.Press the ▲ or ▼ button to select a particular item. Press the
ENTER button.
3.Press the ◄ or ► button to decrease or increase the value of a
particular item. Press theENTER button.
4. Press the EXIT button to exit.
♦ Backlight: Adjusts the screen brightness by adjusting the LCD
backlight brightness. (0~10)
♦ Contrast: Adjusts the lightness and darkness between objects
and the background.
♦ Brightness: Adjusts the brightness of the whole screen.
♦ Sharpness: Adjusts the outline of objects to either sharpen them
or make them more dull.
♦ Colour: Adjusts the colours, making them lighter or darker.
♦ Tint: Adjusts the colour of objects, making them more red or
green for a more natural look.
➣
➣
➣
➣
➣
TV
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G50
R50
Detailed Settings 
sMore
Move Enter
Return
▲
Backlight
7
▼
Move
Adjust Return
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight”, “Contrast" and “Brightness”.
In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the "Tint" Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 19)
The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and that this will reduce the overall running cost.
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
TV
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then
press the ENTER button.
3. Press the ▲ or ▼ button to select "Detailed Settings", then press
the ENTER button.
4. Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
5. When you are satisfied with your setting, press the ENTER
button.
6. Press the EXIT button to exit.
➣ "Detailed Settings" is available in "Standard" or "Movie" mode.
➣ In PC mode, you can only make changes to “Dynamic Contrast”,
“Gamma” and “White Balance” from among the “Detailed
Settings” items.
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G50
R50
Detailed Settings 
sMore
TV
Move Enter
Detailed Settings
Black Adjust
:Off
Dynamic Contrast:Medium
Gamma
:0
Colour Space
: Custom
White Balance
Flesh Tone
: 0
Edge Enhancement:On
xvYCC
:Off
Move Enter
Return








Return
♦ Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
♦ Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
English - 18
BN68-01604R-00Eng-0601.indd 18
2008-06-24 ¿ÀÈÄ 4:32:59
♦ Gamma: -3 ~ +3
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Press the ◄ or ► button until you reach the optimal setting.
♦ Colour Space: Auto/Native/Custom
Colour space is a colour matrix composed of "Red", "Green" and "Blue" colours.
Select your favourite Colour space to experience the most natural Colour.
♦ Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on
programme sources.
♦ Native: Native Colour Space offers deep and rich colour tone.
♦ Custom: Adjusts the colour range to suit your preference.
➣
Customizing the Colour Space
Colour: Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
“Colour” is available when “Colour Space” is set to “Custom”.
Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.
Press the ENTER button.
Red/Green/Blue: In “Colour”, you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it.
Press the ENTER button.
Press the ◄ or ► button to decrease or increase the value of a particular item. Press the
ENTER button.
Reset: Resets the colour space to the default values.
♦ White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
♦ Flesh Tone: -15 ~ +15
You can emphasize the pink 'flesh tone' in the picture.
Press the ◄ or ► button until you reach the optimal setting.
➣ Changing the adjustment value will refresh the adjusted screen.
♦ Edge Enhancement: Off/On
You can emphasize object boundaries in the picture.
♦ xvYCC: Off/On
Setting the xvYCC mode to On increases detail and colour space when watching movies from an
external device (ie. DVD player) connected to the HDMI or Component IN jacks. You must set the
Picture Mode to Movie to enjoy this feature.
➣ Only available in "HDMI" and "Component" on "Movie" mode.
➣ If xvYCC function is active, PIP cannot be selected.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the "Changing the
Picture Standard" instructions number 1 to 3 (On page 17).
2. Press the ▲ or ▼ button to select "Reset", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the ENTER button.
4. Press the EXIT button to exit.
➣ The "Reset" will be set for each "Picture" mode.
TV
Picture
More
Picture Options
OK
Reset
: OK Cancel
Move Enter
Return
English - 19
BN68-01604R-00Eng-0601.indd 19
2008-06-24 ¿ÀÈÄ 4:33:00
Configuring Picture Option
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ▲ or ▼ button to select "Picture Options", then press
the ENTER button.
3. Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
4. When you are satisfied with your setting, press the ENTER
button.
5. Press the EXIT button to exit.
➣
In PC mode, you can only make changes to the “Colour
Tone” and “Size” from among the items in “Picture Options”.
♦ Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can select the most comfortable colour tone to your eyes.
➣
TV
Picture
More
Picture Options 
Reset
: OK 
TV
Move Enter
Return
Picture Options
Colour Tone
:Normal
Size
:Auto Wide
Screen Mode
:16:9
Digital NR
:Auto
DNIe
:Off HDMI Black Level :Normal
Movie Plus
:Low
Blue Only Mode :Off
Move The adjusted values are stored according to the selected
"Picture" mode.
➣ “Warm1” or “Warm2” is only activated when the picture mode is "Movie".
♦ Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
Enter








Return
♦ Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
♦ 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
♦ Wide Zoom: Magnify the size of the picture more than 4:3.
♦ Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
♦ 4:3: This is the default setting for a video movie or normal broadcasting.
♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/
1080p) or Component (1080i/1080p) signals are input.
➣
➣
➣
➣
➣
➣
➣
➣
➣
"Auto Wide" function is available only in "TV", "DTV", "Ext.1", "Ext.2", "AV", and "S-Video" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of
the TV.
Temporary image retention may occur when viewing a static image on the set for more than two
hours.
Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the
by
pressing the ► or ENTER button.
Zoom: Select
by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up
and down. After selecting , use the ▲ or ▼ button to magnify or reduce the picture size in the
vertical direction.
When Double (
,
) mode has been set in PIP, the Picture Size cannot be set.
After selecting “Just Scan” in HDMI (1080i/1080p) or Component (1080i/1080p) mode:
Select
by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button.
You can initialize the setting.
If you use the "Just Scan" function with HDMI 720p input, 1 line will be cut at the top, bottom, left
and right as in the overscan function.
You can select these options by simply pressing the P.SIZE
button on the remote control.
English - 20
BN68-01604R-00Eng-0601.indd 20
2008-06-24 ¿ÀÈÄ 4:33:02
♦ Screen Mode: 16:9/Wide Zoom/Zoom/4:3
When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you
want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country
requires different picture size so this function is intended for users to select it.
♦ 16:9: Sets the picture to 16:9 wide mode.
♦ Wide Zoom: Magnify the size of the picture more than 4:3.
♦ Zoom: Magnify the size of the picture vertically on screen.
♦ 4:3: Sets the picture to 4:3 normal mode.
➣
➣
This function is available in "Auto Wide" mode.
This function is not available in "PC", "Component" or "HDMI" mode.
♦ Digital NR: Off/Low/Medium/High/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction
feature to help reduce any static and ghosting that may appear on the screen.
➣ When the signal is weak, select one of the other options until the best picture is displayed.
♦ DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can
view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied
DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view
the difference in the visual quality.
➣ DNIe™ (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement,
contrast enhancement and white enhancement. New image compensation Algorithm gives
brighter, clearer, more detailed image to you. DNIe™ technology will fit every signal into your
eyes.
➣ This function is not available in "Movie" and "Standard" mode.
♦ HDMI Black Level: Normal/Low
You can directly select the black level on the screen to adjust the screen depth.
➣ This function is active only when the external input connects to HDMI(RGB signals).
♦ Movie Plus: Off/Low/Medium/High/Demo
You can view more natural skin and clear text even in fast moving scenes.
➣ Use this function when watching movies.
➣ This function is not available in “Wide Zoom” and “Zoom” modes.
➣ This function is not available when "PIP" is set to "On".
➣ It is not supported in HDMI 1080p/24Hz, 25Hz, 30Hz mode.
♦ Blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is
used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal
level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Colour Bar Patterns,
without using an additional Blue Filter.
➣ “Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
English - 21
BN68-01604R-00Eng-0601.indd 21
2008-06-24 ¿ÀÈÄ 4:33:02
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set
programme or video input. In this way, you can watch the
picture of set programme or video input from any connected
equipment while watching the main picture.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the▲ or ▼ button to select "PIP", then press the
ENTER button.
3.Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
4.When you are satisfied with your setting, press the ENTER
button.
5. Press the EXIT button to exit.
➣ You may notice that the picture in the PIP window becomes
slightly unnatural when you use the main screen to view a game
or karaoke.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “PIP”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select a particular item.
4. Press the ◄ or ► button to select the required option.
5. Press the EXIT or TOOLS button to exit.
TV
Setup
Plug & Play 
Language
: English 
Time 
Auto Wall-Mount 
Melody
: Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
TV
Move Enter
Return
Mode
:Custom
PIP
Equalizer
PIP
::Off
On SRS TS XT
Source
:TV
Auto Volume
:Off
Size
:
Internal Mute
:Off
Position
:
Reset
Programme
:P 1
Move
Enter
Move 









Return
Enter
Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode Sound Mode Sleep Timer SRS TS XT
Energy Saving PIP
Move :
:
:
:
:
Standard
Custom
Off
Off
Off
Enter
e Exit
PIP
♦ PIP: On/Off
You can activate or deactivate the PIP function.
Main picture
Sub picture
Component
TV, Ext.1, Ext.2, AV, DTV
HDMI 1, 2, 3
TV, Ext.1, Ext.2, AV, DTV
PC
TV, Ext.1, Ext.2, AV, DTV
PIP
Source
Programme
Size
Position
Move :
◄
On
:TV
:
P1
:
:
Adjust
►
Return
♦ Source
You can select a source of the sub-picture.
♦ Size:
/
/
You can select a size of the sub-picture.
➣ If main picture is in "HDMI" mode, "Size" is available.
♦ Position:
/
/
/
You can select a position of the sub-picture.
➣ In Double ( , ) mode, "Position" cannot be selected.
♦ Programme
You can select a channel of the sub-picture only when the "Source" is set to "TV" or "DTV".
English - 22
BN68-01604R-00Eng-0601.indd 22
2008-06-24 ¿ÀÈÄ 4:33:04
Sound Features
1. Press the MENU button to display the menu. Press the ▲ or ▼
button to select "Sound", then press the ENTER button.
2. Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
3. When you are satisfied with your setting, press the ENTER
button.
4. Press the EXIT button to exit.
TV
TV
Sound
Mode
:Custom
Equalizer
SRS TS XT
:Off
Auto Volume
:Off
TV Speaker
:On
Sound Select
:Main
♦ Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used when
watching a given broadcast.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Sound Mode".
3. Press the ◄ or ► button to select the desired sound mode.
4. Press the EXIT or TOOLS button to exit.
♦ Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The sound settings can be adjusted to suit your personal
preferences.
➣ If you make any changes to these settings, the sound mode
is automatically switched to "Custom".
Move Enter






Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
◄ Custom ►
:
Off
:
Off
:
Off
:
Mono
Adjust
e Exit
Equalizer
TV
R
L
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
Move Adjust
Return
♦ SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “SRS TS XT”.
3. Press the ◄ or ► button to select the "Off" or "On".
4. Press the EXIT or TOOLS button to exit.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
:
Off
◄
Off
:
Off
:
Mono
Adjust
►
e Exit
TruSurround XT, SRS and
Symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs,
Inc.
♦ Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
English - 23
BN68-01604R-00Eng-0601.indd 23
2008-06-24 ¿ÀÈÄ 4:33:06
♦ TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➣ The +, - and MUTE buttons do not operate when the "TV Speaker" is set to "Off".
➣ When “TV Speaker” is set to “Off”, you can operate only “Sound Select” (in PIP mode) in Sound
menu.
♦ Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
Selecting the Sound Mode
You can set the sound mode in the "Tools" menu.
When you set to "Dual I-II", the current sound mode is displayed
on the screen.
1.
2.
3.
4.
Press the TOOLS button on the remote control.
Press the ▲ or ▼ button to select “Dual I-II".
Press the ◄ or ► button to select required option.
Press the ENTER button.
A2
Stereo
NICAM
Stereo
➣
➣
➣
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
:
Off
:
Off
:
Off
◄ Mono ►
Adjust
e Exit
Default
Automatic
change
DUAL 1
Automatic
change
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in Analogue TV mode.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to
watch a TV programme without disturbing the other people in the
room.
➣
➣
➣
➣
TV Side Panel
When you insert the head set jack into the corresponding port, you
can operate only "Auto Volume" and "Sound Select"(in PIP mode) in
Sound menu.
Prolonged use of headphones at a high volume may damage your
hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
English - 24
BN68-01604R-00Eng-0601.indd 24
2008-06-24 ¿ÀÈÄ 4:33:06
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is
displayed when you press the INFO button. You must also set
the time if you wish to use the automatic On/Off timers.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the
ENTER button.
3. Press the ENTER button to select "Clock Set".
4.
To...
Press the....
TV
Mode
:Custom 
Setup
Equalizer 
Plug
&
Play
SRS TS XT
:Off 

Language
: English 
Auto
Volume
:Off 
Time

Internal
Mute :Off 

Auto
Wall-Mount
Reset
Melody
: Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
Move
Enter
Return
Return
Clock Set
Month
p
01
q
Hour
00
Set the "Month", "Day", "Year", "Hour" ▲ or ▼ button.
or "Minute"
ENTER
Enter
TV
Move to "Month", "Day", "Year", "Hour" ◄ or ► button.
or "Minute"
Confirm the setting
Move button
Day
Year
01
2008
Minute
00
Move Adjust
Return
5. Press the EXIT button to exit.
➣ The current time will appear every time you press the INFO button.
➣ You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on the
remote control.
➣ If you disconnect the power cord, you have to set the clock again.
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER button.
4. Press the ▲ or ▼ button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180).
Press the ENTER button.
5. Press the EXIT button to exit.
➣ The TV automatically switches to standby mode when the timer reaches 0.
Easy Setting
1. Press the TOOLS button on the remote control.
2.Press the ▲ or ▼ button to select “Sleep Timer”.
3.Press the ◄ or ► button to select the minute.
4. Press the EXIT or TOOLS button to exit.
TV
Mode
:Custom 
Setup
Equalizer 
Plug
& Play
SRS TS
XT
:Off 

Language
: English 
Auto Volume
:Off 

Time
Internal
Mute
:Off
Auto Wall-Mount 

Reset
Melody
: Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
Move
Enter
Return
Move Enter
TV
Return
Time
Clock Set
Sleep Timer
Timer 1
Timer 2
Timer 3
: 00:00
:
Off
:
30
60
:
90
:
120
150
180
Move Enter
Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
◄
Off
:
Off
:
Off
:
Mono
Adjust
►
e Exit
English - 25
BN68-01604R-00Eng-0601.indd 25
2008-06-24 ¿ÀÈÄ 4:33:09
Switching the Television On and Off Automatically
Setup
TV
1. Press the MENU button to display the menu.
Plug & Play 
Press the ▲ or ▼ button to select "Setup", then press the Language
: English 
Time 
ENTER button.
Auto Wall-Mount 
2. Press the ▲ or ▼ button to select "Time", then press the Melody
: Off 
Entertainment : Off 
ENTER button.
Energy Saving : Off 
PIP 
3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
"Timer 3", then press the ENTER button.
Move Enter
Return
Three different On/Off Timer Settings can be made.
➣ You must set the clock first.
Timer 1
TV
On Time
4.Press the ◄ or ► button to select the required item below.
5
00 : 00
Inactivate
Press the ▲ or ▼ button to adjust to the setting satisfied.
6
Off Time
♦ On Time : Select hour, minute and "Activate"/"Inactivate".
00 : 00
Inactivate
(To activate timer with the setting satisfied, set to "Activate".)
Volume
10
♦ Off Time : Select hour, minute and "Activate"/"Inactivate".
Repeat
Once
(To activate timer with the setting satisfied, set to "Activate".)
► Move Adjust
Return
♦ Volume : Select the desired turn on volume level.
♦ Repeat : Select "Once", "Everyday", "Mon~Fri", "Mon~Sat" or "Sat~Sun".
➣ You can set the hour and minute directly by pressing the number buttons on the remote control.
➣ Auto Power Off
When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
Choosing Your Language
When you start using your set for the first time, you must
select the language which will be used for displaying menus
and indications.
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Language", then press the ENTER button.
3. Select a particular language by pressing the ▲ or ▼ button repeatedly.
Press the ENTER button.
4. Press the EXIT button to exit.
TV
Setup
Plug & Play 
Language
: English 
Time 
Auto Wall-Mount 
Melody
: Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
Move Enter
Return
English - 26
BN68-01604R-00Eng-0601.indd 26
2008-06-24 ¿ÀÈÄ 4:33:12
Melody / Entertainment / Energy Saving
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2.Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
3.When you are satisfied with your setting, press the ENTER
button.
4.Press the EXIT button to exit.
TV
Mode
:Custom 
Setup
Equalizer 
Plug
&
Play
SRS TS XT
:Off 

Language
: English 
Auto
Volume
:Off 
Time

Internal
Mute :Off 

Auto
Wall-Mount
Reset
Melody
: Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
Move
Enter
Return
Move Enter
Return
♦ Melody: Off/Low/Medium/High
The TV power on/off melody sound can be adjusted.
➣ The Melody does not play
− When no sound is output from the TV because the MUTE button has been pressed.
− When no sound is output from the TV because the – (Volume) button has been pressed.
− When the TV is turned off by the Sleep Timer function.
♦ E
ntertainment: Off/Sports/Cinema/Game
The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema and
games.
− Off: Switch the "Entertainment" function off.
− Sports: Provides the optimal picture and sound quality for sports. You can enjoy more thrilling
colour and sound.
− Cinema: Provides the optimal picture and sound quality for cinema. You can experience a richer
picture and enhanced sound.
− Game: Provides the optimal picture and sound quality for games. This mode accelerates the playing
speed when using an external game console connected to the TV.
➣
➣
➣
If you set any of the three “Entertainment” modes to On, the settings will be locked and can not be
adjusted. If you want to make Picture and Sound mode adjustments, the “Entertainment” mode
must be turned off.
The “Entertainment” settings are saved for each input source.
If you set any of the three “Entertainment” modes to On, “SRS TS XT” function is not available.
You can press the E.MODE button on the remote control
repeatedly to change the “Entertainment” setting.
English - 27
BN68-01604R-00Eng-0601.indd 27
2008-06-24 ¿ÀÈÄ 4:33:12
♦ Energy Saving: Off/Low/Medium/High/Auto
This feature adjusts the screen brightness depending on the surrounding lighting conditions.
− Off: Turns off the energy saving function.
− Low: Sets the TV to low energy saving mode.
− Medium: Sets the TV to medium energy saving mode.
− High: Sets the TV to high energy saving mode.
− Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Energy Saving”.
3. Press the ◄ or ► button to select the "Off", "Low",
"Medium", "High" or "Auto".
4. Press the EXIT or TOOLS button to exit.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
:
Off
:
Off
◄
Off
:
Mono
Adjust
►
e Exit
Selecting the Source
You can select among external sources connected to your TV’s input jacks.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the ENTER button.
2. Press the ENTER button again, to select "Source List".
➣ When no external device is connected to your set, only
"TV", "Ext.1", "Ext.2", "DTV" are activated in the "Source
List". "AV", "S-Video", "Component", "PC", "HDMI1",
"HDMI2", "HDMI3" are activated only when they are
connected to your set.
3. Select the required device by pressing the ▲ or ▼ button.
Press the ENTER button.
TV
Mode
:Custom
Input
Equalizer
Source
:TV
SRS TS List
XT
:Off
Edit Name
Auto
Volume
:Off
Anynet+(HDMI-CEC)
Internal Mute
:Off
WISELINK
Reset
Move
TV
Move Enter
Enter







Return
Return
Mode
:Custom

Source
List
Equalizer 
TV
SRS TS XT
:Off 
Ext.1
:---Auto Volume
:Off 
Ext.2
:---Internal Mute
:Off 
AV
:---Reset
S-Video
:---Component
:---PC
:---sMore
Move
Enter
Return
Move Enter
Return
Press the SOURCE button on the remote control to toggle
between all the available source.
TV mode can be selected by pressing the TV/DTV button,
number buttons(0~9), and the P / button on the remote
control.
English - 28
BN68-01604R-00Eng-0601.indd 28
2008-06-24 ¿ÀÈÄ 4:33:14
Editing the Input Source Names
Name the device connected to the input jacks to make your
input source selection easier.
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Input", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Edit Name", then press the
ENTER button.
3. Press the ▲ or ▼ button to select the device that you wish to edit. Press the ENTER button.
4. Press the ▲ or ▼ button to select the required device.
Press the ENTER button.
5. Press the EXIT button to exit.
➣ When a PC with a resolution of 1920 x 1080@60Hz is
connected to the HDMI IN 2 port, you should set the
"HDMI2" mode to "PC" in the "Edit Name" of the "Input"
mode.
TV
Mode
:Custom
Input
Equalizer
Source
List
:TV
SRS TS XT
:Off
Edit Name
Auto
Volume
:Off
Anynet+(HDMI-CEC)
Internal Mute
:Off
WISELINK
Reset
Move
TV
Move Enter
Enter







Return
Return
Mode

Edit:Custom
Name
Equalizer 
Ext.1
:------SRS TS XT
:Off

Ext.2
:---VCR
Auto Volume
:Off

DVD
AV
:---Internal Mute
:Off

S-Video
:----Cable STB
Reset
Satellite
STB
Component
:---PC
:---- PVR STB
AV Receiver
HDMI1
:---- s
sMore
Move
Enter
Return
Move Enter
Return
English - 29
BN68-01604R-00Eng.indd 29
2008-06-30 ¿ÀÀü 10:04:03
Previewing the DTV Menu System
♦ The company does not guarantee the normal operation of the
DTV menu for countries other than the supported countries
(France, Germany, Italy, Netherlands, Spain, Switzerland,
United Kingdom, Austria) because only these country standards
are supported.
In addition, when the country of the broadcast stream differs
from the country selected by the current user, the string
appearing in the channel banner, Info, Guide, Channel
Manager, etc. may not be displayed properly.
♦ Available in DTV mode. Preset to the DTV mode by using the
TV/DTV button on your remote control. To help you navigate
around the on-screen menu system and adjust the various
settings available, refer to the following illustration.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Digital Text
Time Zone
Common Interface
System
Language
Audio Language
Subtitle Language
Teletext Language
Preference
➣
Mode
:Custom
Digital
Menu
Equalizer
Guide
SRS TS XT
:Off
Digital
Channel :Off
Auto Volume
Setup
Internal Mute
:Off
Language
Reset
Move
DTV
Move Move
DTV
Now/Next, Full Guide
Off, On
Normal, Hard of hearing
PCM, Dolby Digital
Audio Description Off, On
Volume
Disable, Enable
Move Move
High, Medium, Low, Opaque
Move Move
Application Info, CI Menu
Product Information
Signal Information
Software Upgrade
Reset
Return
Return
Enter
Enter
Return
Return
Enter
Enter
Return
Return
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
Subtitle :Off
Subtitle Mode

DTV
Enter
Channel
Country
:United Kingdom
Auto Store 
Manual Store 
Edit Favourite Channels 
Channel List 
DTV
Enter





Mode
:Custom 
Guide
Equalizer 
Now
& Next
SRS TS
XT Guide
:Off 
Full
AutoGuide
Volume
:Off 
Scheduled
List
Internal Mute
:Off 

Default
Reset Guide :Full Guide 
Digital Channel
Country
Auto Store
Manual Store
Edit Favourite Channels
Channel List
All, Favourites, Default
Setup
Menu Transparency
Change PIN
Parental Lock
Subtitle
Subtitle Mode
Audio Format
Audio Description
TV
Move Enter
Enter





Return
Return
Language
Audio Language
Subtitle Language
Teletext Language
Preference 
Move
Move Enter
Enter
Return
Return
Primary Audio Language
Secondary Audio Language
Primary Subtitle Language
Secondary Subtitle Language
Primary Teletext Language
Secondary Teletext Language (depending on the country)
The sub-items of the CI Menu may vary depending on the CAM model.
English - 30
BN68-01604R-00Eng-0601.indd 30
2008-06-24 ¿ÀÈÄ 4:33:19
Updating the Channel List Automatically
You can update the channel list when the broadcaster adds
new Services or if you move the TV to a new location.
DTV
Channel
Country
:United Kingdom
Auto Store 
Manual Store 
Edit Favourite Channels 
Channel List 
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press
the ENTER button.
2. Press the ▲ or ▼ button to select "Digital Channel", then
press the ENTER button.
Move Enter
Return
3. Press the ENTER button again, to select "Country".
4. Select the appropriate country by pressing the ▲ or ▼ button.
Mode

DTV
Auto:Custom
Store
Equalizer 
Press the ENTER button to confirm your choice.
SRS TS XT
:Off 
➣ Even though you have changed the country setting in this
Auto Volume
:Off
Scanning
for digital
services... 
Internal Mute
:Off 
menu, the country setting for Analogue TV is not changed.
35%
Reset
(Refer to page 12)
Services found: 24 Channel: 38
5. Press the ▲ or ▼ button again, to select "Auto Store".
Stop
Press the ENTER button.
Move
Enter
Return
➣ When it has finished, the number of scanned services
Return
will be displayed.
➣ The existing favourite channel list will not be deleted when the channel list is updated.
➣ To stop the scan before it has finished, press the ENTER button with "STOP" selected.
6. Press the EXIT button to exit.
➣ If the signal status is poor, the "No Service found! Check the aerial connection" message is
displayed.
Updating the Channel List Manually
You can specify the channel for a fast channel search.
DTV
Manual Store
1. Press the MENU button to display the menu.
Channel
Frequency
Bandwidth
▲
Press the ▲ or ▼ button to select "Digital Menu", then press
5
KHz
177500
7 MHz
the ENTER button.
▼
2. Press the ▲ or ▼ button to select "Digital Channel", then
press the ENTER button.
Search
3. Press the ▲ or ▼ button to select "Manual Store", then press
Adjust
Return
the ENTER button.
4. Press the ▲ or ▼ button to select the required option, then press the ENTER button.
➣ − Channel : Channel "5" to "69" in sequence are displayed (depending on the country)
− Frequency : The frequency available in the Channel group is displayed.
−B
andwidth : The available bandwidths are 7 and 8 MHz.
➣ Press the red button to start the scan for digital services.
When it has finished, channels are updated in the channel list.
5. When it has finished, the number of scanned services will be displayed.
6. Press the EXIT button to exit.
English - 31
BN68-01604R-00Eng-0601.indd 31
2008-06-24 ¿ÀÈÄ 4:33:22
Editing Your Favourite Channels
You can edit your favourite channels using the four colour
buttons.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Digital Channel", then press
the ENTER button.
3. Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the ENTER button.
4. Press the red button to display all currently stored channels.
5. Press the ▲ or ▼ button to select a channel you want.
Press the ENTER button.
➣ A "" icon is shown next to the selected channel and the channel will be added to the favourite channel list.
➣ • To undo, press the ENTER button again.
• Select All: Select all channels currently displayed.
• Select None: Deselect all selected channels.
• Preview: Displays (a) currently selected channel(s).
➣ The Favourite Channels settings have been completed.
6. Press the EXIT button to exit.
♦ Add
You can use this function when one or more favourite channels
have been selected.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Digital Channel", then press
the ENTER button.
3. Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the ENTER button.
4. Press the red button in the "Edit Favourite Channels" menu.
To add more channels, refer to the step 5 on the previous description.
5.If you want to check the channel to be stored, press RETURN
button.
Press the EXIT button to exit.
➣ • To
��������������������������������������������������������������
add all channels to the favourite channel list, press the red button.
• To
�����������������������������������������������
remove all channels, press the green button.
• Preview : Displays (a) currently selected channel(s).
• Press
����������
the CH LIST button to display the favourite channel
manager.
DTV
Edit Favourite Channels
(no channels)
Move
Add
Channels
Enter
Return
Return
DTV
Edit Favourite Channels
5
2
5
7
15
16
6
BBC TWO
Five
BBC THREE
abc1
QVC
Move
Enter
Return
Move
Select
Return
Select All
DTV
Select None
Preview
Edit Favourite Channels
2
BBC TWO
★
7
BBC THREE
★
15
abc1
★
Move
Add
Move
DTV
Enter
Return
Preview
Delete
Renumber
Return
Edit Favourite Channels
5
2
5
7
15
16
6
BBC TWO
Five
BBC THREE
abc1
QVC
★
★
★
Move
Select All
Enter
Select None
Return
Preview
Move
Select
Return
English - 32
BN68-01604R-00Eng-0601.indd 32
2008-06-24 ¿ÀÈÄ 4:33:25
♦ Renumber (depending on the country)
DTV
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Digital Channel", then press
the ENTER button.
3. Press the ▲ or ▼ button to select "Edit Favourite Channels",
then press the ENTER button.
4. Select the required channel using the ▲ or ▼ button.
5. Press the green button.
➣ The space for entering the number is a blank.
6.Enter the new channel number. Press ENTER button to store
or RETURN button to cancel.
Edit Favourite Channels
2
BBC TWO
★
--15
BBC THREE
★
abc1
★
Move
Edit
Enter
Return
Return
Confirm
➣
➣
Press the ◄ button to delete an entered digit.
If you enter a number already assigned to another channel,
the number is assigned to the selected channel and the
previous number assigned to the selected channel is assigned to the other channel.
That is, the two numbers are exchanged.
➣ The Favourite Channels are automatically sorted in ascending order of channel numbers.
7. Press the EXIT button to exit.
♦ Preview
DTV
1. In the "Edit Favourite Channels" menu, select the channel to be
previewed by pressing the ▲ or ▼ button.
2. Press the yellow button.
➣ The selected channel is displayed on the screen.
Edit Favourite Channels
2
BBC TWO
★
7
BBC THREE
★
15
abc1
★
Add
Renumber
Move
♦ Delete
1. In the "Edit Favourite Channels" menu, select the channel to be
deleted from the favourite channels list by pressing the
▲ or ▼ button.
2. Press the blue button.
➣ The selected channel and number will be deleted.
➣ To add a deleted channel back in to the favourite channel list, see "Add" on page 32.
DTV
Preview
Delete
Return
Edit Favourite Channels
2
BBC TWO
★
7
BBC THREE
★
Add
Move
Renumber
Preview
Delete
Return
English - 33
BN68-01604R-00Eng-0601.indd 33
2008-06-24 ¿ÀÈÄ 4:33:27
Selecting Channel List
You can exclude the channels you have chosen from the
channels you have scanned.When you scan through the
stored channels, those you have chosen to skip are not
displayed. All channels that you do not specifically choose to
skip are displayed during scanning.
Test Card M' v2.0
1
3
4
5
6
15
16
17
Test Card M' v2.0
Vida003b
Vida004b
vida005b
vida006b
Ch 15
QVC
UKTV Gold
Channel List
23
25
26
27
28
15
33
55
bid-up.tv
TCM
UKTV Style
Discovery
DiscoveryH&L
Cartoon Nwk
Boomerang
Ttext Holidays
All Channels-All
1/2
60 Television X
70 BBC Radio 1
72 BBC Radio 2
73 BBC Radio 3
74 BBC Radio 4
84 heat
91 MOJO
800 ARD-MHP-Data
6 More
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press
the ENTER button.
Previous Page
Next/Page
Favourites
TV
2. Press the ▲ or ▼ button to select "Digital Channel", then press
Move
Watch
Return
the ENTER button.
3. Press the ▲ or ▼ button to select "Channel List".
Press the ENTER button.
4. Press the ▲ or ▼ button to select "All", "Favourites" or
It can be displayed simply by
"Default".
pressing the CH LIST button.
Press the ENTER button.
5.Press the yellow button to toggle between your favourite
channels and all channels.
➣ Your favourite channels are only displayed if they were previously set in the "Editing Your
Favourite Channels" menu (refer to page 32).
6. Press the red or green button to display the previous or next channel List page.
7. Press the ▲ or ▼ button to select a channel to be tuned.
Press the ENTER button.
➣ The channel number, name and an icon are displayed in the top left corner while changing the channel. The channel number and name are displayed if the channel is one of the all channels, and a  icon if the channel is one of the favourite channels.
8. Press the blue button to toggle between your "TV", "Radio", "Data/Other" and "All".
9. Press the CH LIST button to exit from the channel List.
Displaying Programme Information
While viewing a channel, additional information about the current programme may be displayed.
1. While viewing a programme, press the INFO button.
➣ The programme information is displayed.
2. To exit from banner information, press the INFO button.
➣ The information is displayed:
− Parental Rating
− Video Type: SD, HD, Radio
− Audio Type: Mono, Stereo, Dual, Dolby Digital
− Existence of Teletext or DVB Subtitle
− Audio Language
14:30 Sat 1 Sep
AII Channels A
1 AFDO,16:9
14:30~14:33
AFDO 16:9
No Block
Contains video with AFD O; coded frame
SD
is 16:9
Stereo
Subtitle
English
Move
Enter
Return
Exit
English - 34
BN68-01604R-00Eng-0601.indd 34
2008-06-24 ¿ÀÈÄ 4:33:28
Viewing the EPG (Electronic Programme Guide) Information
The EPG (Electronic Programme Guide) information is provided
by the broadcasters. Programme entries may appear blank or
out of date as a result of the information broadcast on a given
channel. The display will dynamically update as soon as new
information becomes available.
♦ Now & Next Guide
For the six channels indicated in the left-hand column, displays the Current programme and the Next programme information.
♦ Full Guide
Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards in time.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ENTER button, to select "Guide".
3. Press the ▲ or ▼ button to select "Now & Next Guide" or
"Full Guide".
Press the ENTER button.
➣ You can also display the guide menu simply by pressing
the GUIDE button.
4.
To...
Watch a programme in the EPG list
Now & Next Guide
13:28 Wed 16 Feb
27 Discovery
Extreme Machines: Armoured Cars
All Channels
INFO
Now
Watch
Full Guide Next
Favourites Exit
Full Guide
13:28 Wed 16 Feb
27 Discovery
Extreme Machines: Armoured Cars
INFO
Today
Watch
Now/Next
13:00
Favourites 14:00
-24Hours
+24Hours
Exit
Then...
• Select a programme by pressing
the ▲, ▼, ◄, ► button.
• Press the ENTER
button.
If the next programme is selected, it is scheduled with the clock icon
displayed. If the ENTER
button is pressed again, the scheduling is
cancelled with the clock icon gone. For details about scheduling
programmes, refer to the next page.
• Select a programme of your choice by
pressing the ▲, ▼, ◄, ► button.
View programme information
➣
➣
• Press the INFO button when the
programme of your choice is
highlighted.
Toggle between the "Now & Next
Guide" or "Full Guide"
• Press the red button repeatedly.
Display the "Favourites" and the "All
Channels" list
• Press the green button repeatedly.
Scrolls backwards quickly (24 hours).
• Press the yellow button repeatedly.
Scrolls forward quickly (24 hours).
• Press the blue button repeatedly.
Exit the guide
• Press the EXIT button.
The programme title is on the upper part of the screen center. Please click on INFO button for
the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality Information(HD/SD), Sound Modes, Subtitle or Teletext, Languages of Subtitle or Teletext, and brief summary of the highlighted programme are included on the detailed information. "..." will be
appeared if the summary is long.
Six channels are displayed. To scroll between channels, move to a channel using the ▲ or ▼ button.
To display page by page, use the P or P button.
English - 35
BN68-01604R-00Eng-0601.indd 35
2008-06-24 ¿ÀÈÄ 4:33:29
Using the Scheduled List
If you make a scheduled viewing list of programs you may like to
see, the channel will be automatically switched to the scheduled
programme at the scheduled time even if you are watching another
programme.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ENTER button, to select "Guide".
3. Press the ▲ or ▼ button to select "Scheduled List", then press
the ENTER button.
4. Press the red button.
The channel will be switched to the scheduled programme.
5.Press the ENTER button to select an item and adjust with the
▲ or ▼ button .
➣ You can also set hour and minute by pressing the number buttons on the remote control.
• Channel: Set the channel.
• Time: Set the time.
• Date: Set Year, Month and Day.
• Frequency: S
et the frequency.
("Once", "Daily", or "Weekly")
6. After setting the schedule, Press the red button.
7. Press the EXIT button to exit.
➣ • Save: Save the adjusted schedule.
• Cancel: Cancel the adjusted schedule.
• Add Programme: Add a new schedule.
• Edit: Readjust the selected schedule.
• Delete: Delete the selected schedule.
DTV
Scheduled List
(No programmes)
Add Programme
Return
DTV
Scheduled List
Tuesday 22 Apr
15:30 ~ 16:00
Once
801 RaiTre
Add Programme
Move
DTV
Edit
Delete
Return
Scheduled List
Channel
802 RaiUno
Time
15 : 20 to -- : --
Date
Tue 22 Apr 2008
Frequency
Once
Save
Adjust
Cancel
Move
Return
Setting the Default Guide
You can preset the default guide style.
DTV
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ENTER button, to select "Guide".
3.Press the ▲ or ▼ button to select "Default Guide", then press
the ENTER button.
4. Select "Now/Next" or "Full Guide" using the ▲ or ▼ button,
and press the ENTER button.
5. Press the EXIT button to exit.
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide :Full
Guide
Now/Next
Full Guide
Move
Move
Enter
Return
Enter
Return
You can select these options
by simply pressing the GUIDE
button on the remote control.
English - 36
BN68-01604R-00Eng-0601.indd 36
2008-06-24 ¿ÀÈÄ 4:33:32
Viewing All Channels and Favourite Channels
In the EPG menu, you can display all channels or favourite channels.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
Now & Next Guide
13:28 Wed 16 Feb
2. Press the ENTER button again, to select "Guide".
27 Discovery
Extreme Machines: Armoured Cars
3. Select the your required guide ("Now & Next Guide" or "Full All Channels
Guide") by pressing the ▲ or ▼ button.
Now
Next
4. Press the ENTER button.
5. Press the green button.
All the channel lists and the Favourite Channel lists will be toggled.
Watch
Full Guide Favourites Exit
6.Select a programme of your choice by pressing the ▲, ▼, ◄, or
► button.
7. Press the INFO button to display information about the highlighted programme.
Full Guide
8. When the Edit Favourite Channels list has not been set up:
13:28 Wed 16 Feb
27 Discovery
Extreme Machines: Armoured Cars
• " The favourites list is empty.
Would you like to choose your favourites now?" message is Today
displayed.
• Select "Yes".
The "Edit Favourite Channels" menu is displayed.
If you select "No", all channels will remain unchanged.
Watch
Now/Next
Favourites -24Hours +24Hours
Exit
������������������������������������������������������������
edit the favourite channels, refer to page 32 for more • To
details.
9 . Press the EXIT button to exit.
➣ "All Channels" is the list of channels that have been scanned by the channel list update.
All channels are displayed in the all channel mode.
➣ "Favourites" (favourite channels) is the list of channels that has been set in the "Edit Favourite Channels"
menu (refer to page 32).
INFO
INFO
The favourites list is empty.
Would you like to choose your
favourites now?
Yes
No
Adjusting the Menu Transparency
You can set the Transparency of the menu.
DTV
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "Menu Transparency" then
press the ENTER button.
4. Select the required option ("High", "Medium", "Low", or
"Opaque") by pressing the ▲ or ▼ button, and press the
ENTER button to change the setting.
5. Press the EXIT button to exit.
Setup
Menu Transparency :Medium
High
Change PIN
Medium
Parental Lock
Low
Subtitle :On
Opaque
Subtitle Mode 
Move
Enter
Return
English - 37
BN68-01604R-00Eng-0601.indd 37
2008-06-24 ¿ÀÈÄ 4:33:34
Setting up the Parental Lock
This feature allows you to prevent unauthorized users, such
as children, from watching unsuitable programmes by a 4-digit
PIN (Personal Identification Number) code that is defined by
the user. The on-screen menu will instruct you to assign a PIN
code (you can change it later, if necessary).
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Parental Lock.", then press the ENTER button.
4. The "Enter PIN" is displayed.
5. Enter your current 4-digit PIN code by using the numeric buttons (0~9).
➣ The default PIN code for a new TV set is 0000.
➣ If you enter an invalid PIN code,the "Invalid PIN code. Please try again." message is displayed.
6. Press the ENTER button.
7. Press the ▲ or ▼ button to select the age rating you want to lock out.
Press the ENTER button.
DTV
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
Subtitle :Off
Subtitle Mode

Move
Move
DTV
Enter
Return
Enter
Return
Parental Lock
Enter PIN
Enter PIN
DTV
DTV
Return
Parental Lock
▲
Parental Rating: No Block
No
Block
No Block
3
4
5
6
7
Move
Enter▼
Return
Move
♦ Change PIN





Enter
Return
Setup
Menu Transparency :Medium 
1.Press the MENU button to display the menu.
Change PIN 
Press the ▲ or ▼ button to select "Digital Menu", then press the
Parental Lock 
ENTER button.
Subtitle :Off 
Subtitle Mode 
2. Press the ▲ or ▼ button to select "Setup", then press 
the ENTER button.
Move
Enter
Return
3. Press the ▲ or ▼ button to select "Change PIN", then press the ENTER button.
Move
Enter
Return
➣ The "Enter PIN" is displayed.
DTV
Change PIN
4. Enter your current 4-digit PIN code by using the numeric Confirm New PIN
buttons (0~9).
➣ The “Enter New PIN” is displayed.
5. Enter your new PIN code by using the numeric buttons (0~9)
Your PIN code has been changed successfully.
➣ The "Confirm New PIN" is displayed.
OK
6. Re-enter your new PIN code to confirm by using the numeric buttons (0~9).
Enter PIN
Return
➣ The Your PIN code has been changed successfully message
is displayed.
7. Press the ENTER button.
8. Press the EXIT button to exit.
➣ If you forget the PIN code, press the remote control buttons in the following sequence, which
resets the PIN to 0-0-0-0:POWER (Off), MUTE, 8, 2, 4, POWER (On).
English - 38
BN68-01604R-00Eng-0601.indd 38
2008-06-24 ¿ÀÈÄ 4:33:38
Setting the Subtitle
You can activate and deactivate the subtitles.
DTV
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Subtitle ", then press the ENTER button.
4. Select "On" by pressing the ▲ or ▼ button. Press the ENTER
button.
5. Press the EXIT button to exit.
You can select these options simply by pressing the
SUBT. button on the remote control.
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
Subtitle :On
Off
Subtitle Mode :Normal
On

Move
Move
Enter
Return
Enter
Return
Setting the Subtitle Mode
Use this menu to set the Subtitle Mode. "Normal" under the
menu is the basic subtitle and "Hard of hearing" is the subtitle
for a hearing-impaired person.
DTV
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
Subtitle :On
Subtitle Mode :Normal
Normal

Hard of hearing
1. P
ress the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
Move
Enter
2. Press the ▲ or ▼ button to select "Setup", then press the Move
Enter
ENTER button.
3.Press the ▲ or ▼ button to select "Subtitle Mode", then press
the ENTER button.
4. Press the ▲ or ▼ button to select "Normal" or "Hard of hearing". Press the ENTER button.
5. Press the EXIT button to exit.
➣ If the programme you are watching does not support the "Hard of hearing" function, "Normal"
automatically activates even though "Hard of hearing" mode is selected.
Return
Return
Selecting the Audio Format
You can only hear Dolby Digital sound through the audio
receiver connected through an optical cable. You can only hear
PCM sound through the main speaker.
When sound is emitted from both the main speaker and the
audio receiver, a sound echo may occur due to the decoding
speed difference between the main speaker and the audio
receiver. In this case, use the internal mute function.
DTV
Setup

Audio Format
: PCM
Audio Description
Digital Text : Enable
Time Zone
Common Interfece




1.Press the MENU button to display the menu.
Move
Enter
Return
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Audio Format", then press the ENTER button.
4. Press the ▲ or ▼ button to select "PCM" or "Dolby Digital". Press the ENTER button.
5. Press the EXIT button to exit.
➣ The Audio Format appears according to the broadcasting signal.
Dolby digital sound is only available when the TV is connected with an external speaker using an
optical cable.
English - 39
BN68-01604R-00Eng-0601.indd 39
2008-06-24 ¿ÀÈÄ 4:33:40
Selecting the Audio Description
This is an auxiliary audio function that provides an additional
audio track for visually challenged persons. This function
handles the Audio Stream for the AD (Audio Description),
when it is sent along with the Main audio from the broadcaster.
Users can turn the Audio Description On or Off and control the
volume.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2.Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
3.Press the ▲ or ▼ button to select "Audio Description", then
press the ENTER button.
4. Press the ▲ or ▼ button to select "On", then press the
ENTER button.
5. Press the ▲ or ▼ button to select "Volume", then press the
ENTER button.
➣ "Volume" is active when "Audio Description" is set to "On".
6. Press the ◄ or ► button until you reach the optimal setting.
Press the ENTER button.
7. Press the EXIT button to exit.
DTV
Setup

Audio Format
: PCM
Audio Description
Digital Text : Enable
Time Zone
Common Interfece

Move
DTV
Return
Audio Description
Audio Description: On
Off
Volume
100
On
Move
DTV
Enter



Enter
Return
Audio Description
Audio Description: On
Volume
100
Move
Enter
Return
Selecting the Digital Text (UK only)
If the programme is broadcast with digital text, this feature is
enabled.
DTV
Setup

Audio Format
: PCM
Audio Description
Digital Text : Enable
Disable
Time Zone
Enable
Common Interfece

1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Move
Enter
Return
3. Press the ▲ or ▼ button to select "Digital Text", then press the ENTER button.
4. Press the ▲ or ▼ button to select "Disable" or "Enable". Press the ENTER button.
5. Press the EXIT button to exit.
➣ MHEG(Multimedia and Hypermedia Information Coding Experts Group) An International standard for data
encoding systems used in multimedia and hypermedia. This is at a higher level than the MPEG system
which includes data-linking hypermedia such as still images, character service, animation, graphic and video
files as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various
fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education,
tele-conferencing, digital libraries and network games.
English - 40
BN68-01604R-00Eng-0601.indd 40
2008-06-24 ¿ÀÈÄ 4:33:43
Selecting the Time Zone (Spain only)
Select the local time zone.
DTV
1. P
ress the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲
������������������������������������������������
or ▼������������������������������������������
button to select "Setup", then press the
ENTER button.
3. Press the ▲
������������������������������
or ▼������������������������
button to select "Time ����������������������
Zone", then press the
ENTER button.
4. Select the time zone where you locate by pressing the
▲ or ▼ button.
Press the ENTER button.
➣ The following options are available
The Iberian Peninsula and Balearic Islands Canary Islands
5. Press the EXIT button to exit.
Setup

Audio Format
: PCM
Audio Description
Digital Text : Enable
Time Zone
Common Interfece

Move
DTV
Enter



Return
Time Zone
The Iberian Peninsula and Balearic Islands
Canary Islands
Adjust
Enter
Return
Viewing Product Information
You can view your product information. For service or repair,
please contact a Samsung approved dealer.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "System", then press the ENTER button.
4. Press the ENTER button again, to select "Product Information".
➣ The Product Information menu is selected.
- Software Version, Firmware Version
5. Press the EXIT button to exit.
DTV
Product Information
Software Version: T-PERLDEUC-0202
Firmware Version: T-EMMA2DEUB-0106
Return
English - 41
BN68-01604R-00Eng-0601.indd 41
2008-06-24 ¿ÀÈÄ 4:33:45
Checking the Signal Information
You can get information about the signal status.
DTV
Signal Information
Service: ?
1.Press the MENU button to display the menu.
Service ID:0000
Multiplex: ? (TSID 0000, ONID 0000)
Press the ▲ or ▼ button to select "Digital Menu", then press the
Network: ? (ID 0000)
ENTER button.
Bit error level:
10
Signal Strength: 0
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Move
Enter
Return
3. Press the ▲ or ▼ button to select "System", then press the Return
ENTER button.
4. Press the ▲ or ▼ button to select "Signal Information", then press the ENTER button.
5. Press the EXIT button to exit.
➣ If the signal status is poor, the "No signal." message is displayed.
Upgrading the Software
To keep your product up-to-date with new Digital Television
features then software upgrades are periodically broadcast as
part of the normal Television signal.
It will automatically detect these signals and display the
software upgrade banner. You are given the option to install the
upgrade.
DTV
System
Product Information
Signal Information
Software Upgrade
Reset




1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
Move
Enter
Return
ENTER button.
DTV
Software Upgrade
2. Press the ▲ or ▼ button to select "Setup", then press the Software Information

ENTER button.
Manual Upgrade

3. Press the ▲ or ▼ button to select "System", then press the Standby Mode upgrade : On

ENTER button.
4. Press the ▲ or ▼ button to select "Software Upgrade",
then press the ENTER button.
5.Press the ▲ or ▼ button to select “Software Information”,
Move
Enter
Return
“Manual Upgrade” or “Standby Mode upgrade”.
Press the ENTER button.
♦ Software Information
Press the ENTER button, then the current software version is shown. To display the software
version information, press the ENTER button again.
To switch to an alternative version, press the red button.
Press the blue button to reset, activate the upgrade and restart.
♦ Manual Upgrade
Press the ENTER button to search for new software from the currently broadcasting channels.
♦ Standby Mode Upgrade: On / Off
Press the ENTER button. To continue software upgrade with master power on, Select On
by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a manual upgrade is
automatically conducted. Since the power of the unit is turned on internally, the screen may be on
slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software
upgrade is completed.
6. Press the EXIT button to exit.
English - 42
BN68-01604R-00Eng-0601.indd 42
2008-06-24 ¿ÀÈÄ 4:33:47
Viewing Common Interface
This contains information on CAM inserted in the CI slot and
displays it.
DTV
Application Info
Type : CA
Manufacturer : Channel Plus
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Common Interface", then
press the ENTER button.
4. Press the ENTER button to display the information for your application.
5. Press the EXIT button to exit.
➣ The Application Info inserting is about the CI CARD.
You can install the CAM anytime whether the TV is ON or OFF.
1. Purchase the CI CAM module by visiting your nearest dealer or by phone.
2. Insert the CI CARD into the CAM in the direction of the arrow until it fits.
3. Insert the CAM with the CI CARD installed into the common
interface slot.
(Insert the CAM in the direction of the arrow, right up to the
end so that it is parallel with the slot.)
4. Check if you can see a picture on a scrambled signal channel.
Info : Top Up TV
Return
Selecting the CI (Common Interface) Menu
This enables the user to select from the CAM-provided menu.
CI Menu
Main menu
1.Press the MENU button to display the menu.
Module information
Press the ▲ or ▼ button to select "Digital Menu", then press the
Smart card information
Language
ENTER button.
Software Download
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
Press OK to select, or Exit to quit
3. Press the ▲ or ▼ button to select "Common Interface",
Move
Enter
then press the ENTER button.
4. Select to "CI Menu" by pressing the ▲ or ▼ button, and press the
ENTER button.
5. Select the required option by pressing the ▲ or ▼ button, and press the ENTER button.
6. Press the EXIT button to exit.
➣ Select the CI Menu based on the menu PC Card.
Exit
English - 43
BN68-01604R-00Eng-0601.indd 43
2008-06-24 ¿ÀÈÄ 4:33:48
Resetting
You can reset the values stored to the factory default values.
➣ The Reset operation deletes all channel information and user preferences returning all values to their default factory state.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "System", then press the ENTER button.
4. Press the ▲ or ▼ button to select "Reset", then press the ENTER button.
5. The "Enter PIN" screen will appear.
6. Enter your current 4-digit PIN code by using the numeric buttons (0~9).
➣ The warning message is displayed. All values will be reset
by pressing the coloured buttons (red, green, yellow, and
blue) in turn.
7. Press the EXIT button to exit.
DTV
Reset
Enter PIN
Enter PIN
DTV
Return
Reset
WARNING: All channel settings and user
preferences will be lost and returned to the factory
defaults. It is recommended that a reset is performed
only when serious problems are experienced.
Return
Selecting the Preferred Language (Subtitle, Audio or Teletext)
You can change the default value for subtitle, audio teletext
languages.
Displays the language information for the incoming stream.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER button.
2. Press the ▲ or ▼ button to select "Language", then press
the ENTER button.
3. Press the ▲ or ▼ button to select "Audio Language",
"Subtitle Language" or "Teletext Language".
Press the ENTER button.
4. Select a particular language by pressing the ▲ or ▼ button repeatedly.
Press the ENTER button.
➣ English is the default in cases where the selected language is unavailable in the broadcast.
5. Press the EXIT button to exit.
➣ While viewing a programme, the subtitle can be selected
While viewing a programme, audio languages can be selected.
DTV
Language
Audio Language
Subtitle Language
Teletext Language
Preference 
Move
DTV
Enter
Return
Language
Audio Language
Subtitle Language
Teletext Language
Preference 
Move
Enter
Return
Language
DTV
Audio Language
Subtitle Language
Teletext Language
Preference 
Move
Enter
Return
English - 44
BN68-01604R-00Eng-0601.indd 44
2008-06-24 ¿ÀÈÄ 4:33:52
Preference
This menu consists of 6 sub-menus:
DTV
Language
Primary Audio Language, Secondary Audio Language, Primary
Audio Language
Subtitle Language, Secondary Subtitle Language, Primary
Subtitle Language
Teletext Language, Secondary Teletext Language.
Teletext Language
Using this feature, users can select one of the languages.
Preference 
The language selected here is the default when the user selects a
channel.
Move
Enter
Return
♦ Press the ▲ or ▼ button to select required menu (Primary
Move
Enter
Return
Audio Language, Secondary Audio Language, Primary Subtitle
Language, Secondary Subtitle Language, Primary Teletext Language, Secondary Teletext Language),
then press the ENTER button. The options of the selected menu are displayed.
♦ Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
➣
➣
If you change the language setting, the Subtitle Language, Audio Language, and the Teletext
Language of the Language menu (refer to page 44) are automatically changed to the selected
language.
The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a
list of languages supported by the current channel and the selection is highlighted. If you change this
language setting, the new selection is only valid for the current channel. The changed setting does not
change the setting of the Primary Subtitle Language, Primary Audio Language, or the Primary Teletext
Language of the Preference menu.
English - 45
BN68-01604R-00Eng-0601.indd 45
2008-06-24 ¿ÀÈÄ 4:33:52
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The
actual screens on your PC may be different depending upon your particular
version of Windows and your particular video card. Even if your actual screens
look different, the same, basic set-up information will apply in almost all cases.
(If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear.
3.When the control panel window appears, click on "Display" and a display
dialog-box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1920 X 1080
If a vertical-frequency option exists on your display settings dialog box, the correct value is
"60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution. The
resolutions in the table are recommended.
➣
➣
➣
➣
➣
➣
➣
D-Sub Input
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-/+
VESA
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1360 x 768
1600 x 1200
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
63.981
79.976
47.712
75.000
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.020
75.025
60.015
60.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
135.000
85.500
162.000
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
+/+
CVT
1920 x 1080RB
66.587
59.934
138.500
+/-
HDMI/DVI Input
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
VESA
640 x 480
800 x 600
1024 x 768
1280 x 1024
1360 x 768
1600 x 1200
31.469
37.879
48.363
63.981
47.712
75.000
59.940
60.317
60.004
60.020
60.015
60.000
25.175
40.000
65.000
108.000
85.500
162.000
-/+/+
-/+/+
+/+
+/+
CEA
1920 x 1080p
67.500
60.000
148.500
+/+
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
Too long or low quality VGA cable can cause picture noise at high resolution modes
(1920x1080 or 1600x1200).
English - 46
BN68-01604R-00Eng-0601.indd 46
2008-06-24 ¿ÀÈÄ 4:33:53
Setting up the TV with your PC
➣
Press the SOURCE button to select PC mode.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
3. When you are satisfied with your setting, press the ENTER
button.
4. Press the EXIT button to exit.
TV
♦ Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Auto Adjustment”, then
press the ENTER button.
♦ Screen Adjustment:
Coarse/Fine
The purpose of picture quality adjustment is to remove or reduce
picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (coarse) and Finetune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
Press the ▲ or ▼ button to select "Coarse" or "Fine", then press
the ENTER button.
Press the ◄ or ► button to adjust the screen quality.
Press the ENTER button.
Position
Adjust the PC’s screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENTER button.
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 45
Sharpness 50
Auto Adjustment 
Screen Adjustment 
Detailed Settings 
sMore
Enter
Return
Auto Adjustment in progress
Please wait.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving PIP
Auto Adjustment
Move TV
:
:
:
:
:
Standard
Custom
Off
Off
Off
Enter
e Exit
Screen Adjustment
Coarse50
Fine93
Position 
Image Reset 
Move TV
Enter
Return
Position
Image Reset
You can replace all image settings with the factory default
values.
Move TV
Move Enter
Return
Screen Adjustment
Coarse50
Fine93
Position 
Image Reset 
Move Enter
Return
English - 47
BN68-01604R-00Eng-0601.indd 47
2008-06-24 ¿ÀÈÄ 4:33:57
Using the WISELINK Function
This function enables you to view and listen to photo (JPEG)
and audio files (MP3) saved on a USB Mass Storage Class
(MSC) device.
Press the POWER button on the remote control or your set.
Connect a USB device containing JPEG and/or MP3 files to the
WISELINK jack (USB jack) on the side of the TV.
If you enter the WISELINK mode with no USB device
connected the message “There is no device connected” will
appear. In this case, insert the USB device, exit the screen by
pressing the W.LINK button on the remote control and enter
the WISELINK screen again.
TV Side Panel
USB Drive
Only alphanumeric characters must be used as a folder name or filename (photo, music).
The file system only supports FAT16/32 (The NTFS file system is not supported)
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
Wiselink only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class
Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB
HDD and HUB are not supported.)
Before connecting your device to the TV, please back up your files to prevent them from damage or loss
of data.SAMSUNG is not responsible for any data file damage or data loss.
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there
may be a USB Compatibility problem.
Only MP3 and JPEG file formats are supported.
The Wiselink mp3 format only supports music files with a high sampling frequency (32 kHz, 44.1 kHz,
or 48 kHz).
We recommend the sequential jpeg format.
Do not disconnect the USB device while it is loading.
MTP (Media Transfer Protocol) is not supported.
The playing duration of an mp3 file may be displayed as ‘00:00:00’ if its playing time information is not
found at the start of the file.
The higher the resolution of the image, the longer it takes to display on the screen.
The Photo or Music List displays up to 300 folders or files.
Loading may take some time depending on the size of the file.
English - 48
BN68-01604R-00Eng-0601.indd 48
2008-06-24 ¿ÀÈÄ 4:33:57
Using the WISELINK Menu
1. Press the MENU button. Press the ▲ or ▼ button to select
“Input”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “WISELINK”, then press the
ENTER button.
Input
TV
Source List
: TV ►
Edit Name ►
Anynet+ (HDMI-CEC)
WISELINK
Move 3. Press the ▲ or ▼ button to select the corresponding USB
Memory Device, then press the ENTER button.
➣ The "WISELINK" menu differs depending on the USB
Memory Device connected to TV.
➣ Some devices may not be supported due to compatibility
problems.
Enter
Return
STORAGE DEVICE
STORAGE DEVICE
SUM
STORAGE DEVICE
STORAGE DEVICE
4. Press the ◄ or ► button to move to an icon, then press the
ENTER button.
➣ To exit "WISELINK" mode, press the W.LINK button on the
remote control.
Move
Enter
Exit
Photo
SUM
861MB/994MBFree
Photo
Music
Move
Setup
Enter
Return
Press the W.LINK button on the remote control to display a
WISELINK menu.
Using the Remote Control Button in WISELINK Menu
Button
▲/ ▼/ ◄/ ►
ENTER
Operations
Move the cursor and select an item.
Select the currently selected item.
Play the Slide Show or MP3 file.
Pause the Slide Show or MP3 file.
RETURN
INFO
Return to the previous menu.
Run various functions from the Photo and Music menus.
Stop the current slide show or MP3 file.
Page Up or Down (file list item)
EXIT
Stop the current function and return to the previous high-level menu.
English - 49
BN68-01604R-00Eng-0601.indd 49
2008-06-24 ¿ÀÈÄ 4:34:03
Using the PHOTO (JPEG) List
This menu shows JPEG files and folders saved on an USB memory
device.
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”.
(Refer to page 49)
2. Press the ◄ or ► button to move to “Photo”, then press the
ENTER button. The saved file information is displayed as a
folder or file.
3. Press the ▲, ▼, ◄ and ► buttons to select a file.
• Pressing the ENTER button over a photo icon shows the
currently selected photo in full screen.
• Pressing the ENTER button over a folder icon shows the
JPEG files included in the folder.
Photo
SUM
861MB/994MBFree
Photo
Music
Setup
Move
Enter
Return
1/10 Page
Photo
580*440
47KB
Jun 1,2008
3/23
Upper Folder Forder1
Photo 0001
Photo 0001
None
File 7
File 8
File 12
File 13
To exit "WISELINK" mode, press the W.LINK button on the
remote control.
➣ Moving to a photo may take a few seconds to load the file.
At this point, the
icon will appear at the top left
of the screen.
Select
Move
Enter
Option Return
➣ It takes time to show JPEG files as Thumbnail images.
➣ This menu only shows files whose file extension is jpg. Files of other formats such as bmp or tiff
will not be displayed.
➣ The files are displayed on a page. 15 thumbnail photos are displayed per page.
➣ The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.
➣ Certain types of USB Digital camera and audio devices may not be compatible with this TV.
➣ Folders are displayed first and they are followed by all JPEG files in the current folder.
➣ The folders and JPEG files appear in the order of the time they were saved to the USB memory
device.
➣ If the photo is displayed in full screen, you can zoom in and out or rotate the photo on the screen.
➣ While a full screen is displayed, ◄ or ► button will let you see another photo image in the same
folder.
➣ Press the button when a Photo icon is selected to start a Slide Show.
➣ Photos without EXIF information may not be displayed as thumbnail images in the PHOTO LIST
depending on the picture quality and resolution.
File 4
File 5
File 6
File 9
File 10
File 11
SUM
895MB/993MB
INFO
Viewing a Slide Show
4. Press the INFO button to display the option("Start Slide Show",
"Select All").
5. Press the ▲ or ▼ button to select “Start Slide Show” then
press the ENTER button.
➣ During the slide show, files are displayed in order from the
currently shown file.
➣ MP3 files can be automatically played during the Slide
Show if the Default Background Music is set to On. To
enable this function, MP3 files and other photo files must
be located in the same folder on the USB Memory Device.
6. Press the INFO button during the slide show to set the
following options ("Slide Show Speed", "Background Music",
"Background Music Setting", "List"). Press the ▲ or ▼ button
to select the option, then press the ENTER button.
• After setting the option press the ENTER button to make a
change.
1/10 Page
Photo
580*440
47KB
Jun 1,2008
3/23
Upper Folder Forder1
File 4
Start
Slide Show
895MB/993MB
Select All
INFO
File 9
Exit
Select
File 5
File 10
Move
Photo 0001
Photo 0001
None
File 6
File 7
File 8
File 11
Enter
File 12
INFO
Option
File 13
Return
Slide Show Speed Nomal►
Background Music
On ►
Background Music Setting
List
INFO
Exit
English - 50
BN68-01604R-00Eng-0601.indd 50
2008-06-24 ¿ÀÈÄ 4:34:16
Using the Menu in the Photo List
Start Slide Show:
You can start a Slide Show.
1/10 Page
Photo
580*440
47KB
Jun 1,2008
3/23
Select All:
Select all the files in the folder.
Upper Folder Forder1
File 4
Deselect all:
Deselect all the files in the folder.
File 5
Photo 0001
Photo 0001
None
File 6
File 7
File 8
Start Slide Show
895MB/993MB
Select
All
File 9
Deselect all
INFO
File 10
Select
Exit
Move
File 11
Enter
File 12
INFO
File 13
Option
Return
Using the Menu during a Slide Show
Slide Show Speed:
Select to control the slide show speed.
Press the ▲ or ▼ button to select the required option
("Fast", "Normal", "Slow"), then press the ENTER button.
Fast
Slide Show Speed Nomal
Background Music:
Select to choose whether you want to play an MP3 file during a
slide show.
Press the ▲ or ▼ button to select the required option ("On", "Off"),
then press the ENTER button.
Background Music Setting:
While the slide show is in progress, MP3 files and folders under
the same directory are displayed.
Background Music
Nomal
On ►
Slow
Background Music Setting
List
INFO
Exit
Slide Show Speed Nomal►
On
Off
Background Music Setting
On
Background Music
Press the ▲ or ▼ button to select a music file, then press the
yellow button.
The ( ) mark appears to the left of the selected music.
Repeat the above operation to select multiple music files.
Press the ENTER button.
➣ If you turn Off the Background Music, even if the Background
Music Settings have been set up, the background music will
not be played.
List
INFO
Exit
Background Music Setting
Choose file for background music
Upper Folder
01-001
02-002
03-003
04-004
05-005
◄◄ 1/1 Page ►►
Select List:
The file information is displayed as a folder or JPEG file. To exit
"WISELINK" mode, press the W.LINK button on the remote control.
➣ When selecting a photo file, the photo file information is
displayed on the left side of the TV screen, such as the
resolution, the date modified and the order of the file in the
current directory (e.g. 10th out of 15).
Move
Enter
Return
1/10 Page
Photo
580*440
47KB
Jun 1,2008
3/23
Upper Folder Forder1
File 4
File 5
Photo 0001
Photo 0001
None
File 6
File 7
File 8
SUM
895MB/993MB
File 9
Select
File 10
Move
File 11
Enter
File 12
INFO
Option
File 13
Return
Such as the resolution
: Folder icon
File Size
: Photo icon
Date modified
Photo
580*440
47KB
Jun 1,2008
3/23
Order of the file in the
current directory
: Move to the previous
folder stage icon
English - 51
BN68-01604R-00Eng-0601.indd 51
2008-06-24 ¿ÀÈÄ 4:34:22
Using the Option Menu
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”.
(Refer to page 49)
2. Press the ◄ or ► button to move to “Photo”, then press the
ENTER button. The saved file information is displayed as a
folder or file.
3. Press the ▲, ▼, ◄ and ► button to select a file, then press the ENTER button. Pressing the button over a photo
thumbnail displays the photo in full screen.
4. Press the INFO button to display the option("Start Slide Show" ,
"Zoom", "Rotate", "List")
Start Slide Show
Zoom
X1 ►
Rotate
0►
List
Exit
INFO
Start Slide Show:
• Press the ▲ or ▼ button to select “Start Slide Show”, then press
the ENTER button. You can start a Slide Show.
Zoom:
• Press the ▲ or ▼ button to select “Zoom”, then press the
ENTER button.
• Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button. (X1, X2, X4)
➣ To pan up/down/left/right in the zoomed-in photo, press the
INFO button to exit option menu, then press the ▲, ▼, ◄ and
► buttons.
➣ "Start Slide Show" or "Rotate" is disabled when the "Zoom"
option is selected.
➣
X1
Start Slide Show
Zoom
X1
Rotate
0►
x1
x2
x4
List
Exit
INFO
" x1 " : Restore a photo to its original size.
" x2 " : Zoom-in to a photo x2.
" x4" : Zoom-in to a photo x4.
/
/
/
: Move the zoomed-in photo up/down/right/left.
Rotate:
• Press the ▲ or ▼ button to select “Rotate”, then press the
ENTER button.
• Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button. (0°, 90°, 180°, 270°)
➣ The rotated file is not saved.
➣ "Start Slide Show" or "Zoom" is disabled when the “Rotate”
option is selected.
➣
0°
Start Slide Show
Zoom
X1 ►
Rotate
0
0
90
List
INFO
Exit
180
270
"0°" : This rotates a photo to its original position
"90°" : This rotates a photo by 90 degrees
"180°" : This rotates a photo by 180 degrees
"270°" : This rotates a photo by 270 degrees
English - 52
BN68-01604R-00Eng-0601.indd 52
2008-06-24 ¿ÀÈÄ 4:34:23
Using the MP3 List
This menu shows MP3 files from among the files saved on a USB
memory device.
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”.
(Refer to page 49)
2. Press the ◄ or ► button to move to “Music”, then press the
ENTER button. The saved file information is displayed as a folder or file.
3. Press the ▲ or ▼ button to move to an icon, then press the
ENTER button.
• Pressing the ENTER button over a musical note icon
immediately plays the music file.
• Pressing the ENTER button over a folder icon shows
the music files included in the folder.
• To select a file on the next page, press the
or
button to move to the next page.
4. To select all files or a file, press the INFO button to
display the Music menus. Press the ENTER button to
select “Play”, “Repeat Music” or “Select All”.
To exit "WISELINK" mode, press the W.LINK button on the
remote control.
➣ The folders and MP3 files appear in the order of the time
they were saved to the USB memory device.
Play:
Select to play MP3 files.
➣
➣
➣
SUM
861MB/994MBFree
Photo
Music
Setup
Move
Enter
Return
1/10 Page
Music
006-006
5MB
Jun 1,2008
3/23
Folder 1
Play
Repeat Music
Off ►
Select All
INFO
00:04:00
Upper Folder
Exit
Select
001-001
00:04:01
002-002
00:04:28
003-003
00:04:12
004-004
00:05:39
005-005
00:04:30
006-006
00:04:30
007-007
00:03:54
008-008
Move
00:05:25
Enter
INFO
Option
Return
: Folder icon
: Music icon
: Move to the previous
folder stage icon
Using the Option Menu
➣
➣
➣
Music
Press the
button while playing an MP3 file to pause the file.
Press the
button to exit Play mode.
This menu only shows files with the MP3 file extension. Files with other file extensions are not
displayed, even if they are saved on the same USB device.
The selected file is displayed on the top with its playing time.
To adjust the music volume, press the –
+ button on the remote control. To mute the sound,
press the MUTE button on the remote control.
If the sound is odd when playing MP3 files, exit WISELINK mode and adjust the "Equalizer" and
"SRS TS XT" in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)
Repeat Music:
Select to repeatedly play MP3 files in the current folder.
You can select On or Off.
Select All:
Select all the files in the folder.
Deselect all:
Deselect all the files in the folder.
Music function information icon
: When all music files in the folder (or the selected file) are repeated. “Repeat Music” is “On”.
: When all music files in the folder (or the selected file) are played once. “Repeat Music” is “Off”.
/
:W
hen pressing the
: When pressing the
/
button on the remote control while music is playing.
button on the remote control when music is stopped.
English - 53
BN68-01604R-00Eng-0601.indd 53
2008-06-24 ¿ÀÈÄ 4:34:48
Using the Setup Menu
Setup displays the user settings of the WISELINK menu.
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”.
(Refer to page 49)
2. Press the ◄ or ► button to move to “Setup”, then press the ENTER button.
3. Press the ▲ or ▼ button to select an item you want, then press the ENTER button. (“Slide Show
Speed”, “Background Music”, “Background Music Setting”, “Repeat Music”, “Screen Saver”)
4. Press the ▲ or ▼ button to select the option, then press the ENTER button.
To exit WISELINK mode, press the W.LINK button on the remote control.
Slide Show Speed:
Select to control the slide show speed. You can select “Fast”,
“Normal” or “Slow”.
Setup
Slide Show Speed
Normal Fast
Background Music
On Background Music Setting
►
Screen Saver
1min.
►
Setup
►
Off
Background Music :
Select to determine whether to play an MP3 file during a slide show.
You can select Music “On” or Music “Off”.
Normal
Slow
Repeat Music Move
Enter
Slide Show Speed
Normal
Background Music
On Return
►
Off
On
Background Music Setting
Repeat Music Off
►
Screen Saver
1min.
►
Background Music Setting:
Move
Enter
Return
Background Music Setting
While a slide show is in progress, use the "Background Music
Setting" to select a music file to listen to. Select an MP3 file as the
background music.
Choose file for background music
Upper Folder
01-001
02-002
03-003
04-004
05-005
◄◄ 1/1 Page ►►
Repeat Music :
Select Select to determine whether to repeat playing the music when all
MP3 files in the current folder have been played.
Setup
Move
Enter
Slide Show Speed
Normal
Background Music
On Return
►
►
Background Music Setting
Screen Saver:
Select to set the waiting time before the screen saver appears.
The screensaver will appear when no button is pressed for 1, 5 or
10 minutes.
Repeat Music Off
Screen Saver
1min.
Setup
Off
On
Move
Enter
►
Return
Slide Show Speed
Normal
►
Background Music
On ►
Background Music Setting
Repeat Music Off
Screen Saver
1min. 1min.
5min.
10min.
Move
►
Enter
Return
English - 54
BN68-01604R-00Eng-0601.indd 54
2008-06-24 ¿ÀÈÄ 4:35:17
What is Anynet+?
Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling
all connected AV devices through the Anynet+ menu when Samsung Electronics AV devices are
connected.
Connecting Anynet+ Devices
The Anynet+ system supports AV devices supporting Anynet+ only.
Check if there is an Anynet+ mark on the AV device to be connected to the TV.
To directly connect to TV
Anynet+
Device 1
TV
HDMI 1.3
Cable
Anynet+
Device 2
HDMI 1.3
Cable
Connect the
[HDMI 1], [HDMI
2], [HDMI 3] jack
on the TV and the
HDMI OUT jack of
the corresponding
Anynet+ device
using the HDMI
cable.
Anynet+
Device 3
HDMI 1.3
Cable
To connect to Home Theater
TV
Anynet+
Device 1
Home Theatre
HDMI 1.3 Cable
Optical Cable
HDMI 1.3 Cable
Anynet+ Device 2
HDMI 1.3 Cable
➣
➣
➣
➣
➣
➣
Anynet+
Device 3
HDMI 1.3 Cable
1. C
onnect the
[HDMI 1], [HDMI
2], [HDMI 3] jack
on the TV and the
HDMI OUT jack of
the corresponding
Anynet+ device
using the HDMI
cable.
2. Connect the
HDMI IN jack of
the home theatre
and the HDMI
OUT jack of the
corresponding
Anynet+ device
using the HDMI
cable.
Connect only the optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio
Input on the receiver.
Connect only one receiver.
You can listen to 5.1 channel sound through the home theatre’s speakers. Otherwise, you can only
listen to 2 channel stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical) of
the home theatre and the TV correctly to listen to TV sound through the home theatre. However, you
cannot listen to sound from the BD recorder that is sent to the home theatre via the TV in 5.1 channel
sound because the TV outputs only 2 channel stereo sound. Please see the manual for the home
theatre.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support
Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 8 AV devices in total.
English - 55
BN68-01604R-00Eng-0601.indd 55
2008-06-24 ¿ÀÈÄ 4:35:17
Setting Up Anynet+
The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1. Press The TOOLS button. Then Press the ENTER button to
select "Anynet+(HDMI-CEC)".
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
2. Press the ENTER button to select "Anynet+ (HDMI-CEC)",
then press the ENTER button.
3. Press the ▲ or ▼ button to select "On", then press the
ENTER button.
➣ The "Anynet+ (HDMI-CEC)" function is enabled.
➣ If you select "Off", "Anynet+ (HDMI-CEC)" is disabled.
➣ When the "Anynet+ (HDMI-CEC)" function is disabled, all the
Anynet+ related operations are deactivated.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move TV
:
:
:
:
:
:
Standard
Custom
Off
Off
Off
Mono
Enter
e Exit
P9
View TV
Select Device

Record

Menu on Device

Device Operation

Receiver

:Off
Setup
Move Return

Enter
Setup
Anynet+ (HDMI-CEC)
: Off
Off
Auto Turn Off : Off
On
Searching Connections
Move Enter
Return
Turning an Anynet+ Device Off Automatically when the TV is Turned Off
1. Press the ▲ or ▼ button to select "Auto Turn Off", then press
the ENTER button.
2. Press the ▲ or ▼ button to select "Yes", then press the
ENTER button.
➣
➣
➣
➣
The Auto turn off function is enabled.
If you select "No", the Auto turn off function is cancelled.
Setup
Anynet+ (HDMI-CEC)
: On
Auto Turn Off : Off
Searching Connections
No
Yes
Move Enter
Return
Press the EXIT button to exit.
The Select Device setting of the TV remote control is to be set
to TV to use the Anynet+ function.
If you set "Auto Turn Off" to "Yes", connected external devices are also turned off when the TV is
turned off. However, if the device is recording, it may not be turned off.
English - 56
BN68-01604R-00Eng-0601.indd 56
2008-06-24 ¿ÀÈÄ 4:35:18
Scanning and Switching between Anynet+ Devices
1. Press the TOOLS button.
TV
P9
Then press the ENTER button to select "Anynet+(HDMIView TV
CEC)".
Select Device

2. Press the ▲ or ▼ button to select "Select Device", then press
Record

Menu on Device

the ENTER button.
Device Operation

3. Press the ▲ or ▼ button to select to a particular device and
Receiver :Off

press the ENTER button. It is switched to the selected device.
Setup

4. If you cannot find a device you want, press the ▲ or ▼ button to
Move Enter
Return
select "Setup", then press the ENTER button.
Setup
5. Press the ▲ or ▼ button to select "Searching Connections",
then press the ENTER button.
Anynet+ (HDMI-CEC)
: On

The message "Configuring Anynet+ connection..." is displayed. Auto Turn Off : Yes

When searching devices completes, the connected devices are Searching Connections 
listed in the Anynet+ menu.
➣ Switching to the selected devices may take up to 2 minutes.
Move Enter
Return
You cannot cancel the operation during the switching
operation.
➣ The time required to scan for devices is determined by the number of connected devices.
➣ When the device scan is complete, the number of found devices is not displayed.
➣ Although the TV automatically scans devices when it is turned on using the POWER button, devices
connected when the TV is on or under a specific circumstance are not displayed in the device list.
Therefore select "Searching Connections" menu to search devices.
➣ If you have selected external input mode by pressing the SOURCE button, you cannot use the
Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.
English - 57
BN68-01604R-00Eng-0601.indd 57
2008-06-24 ¿ÀÈÄ 4:35:19
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected
to the TV.
Anynet+ Menu
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
Description
Switches from Anynet+ to TV broadcast mode.
Your TV connects to the corresponding device.
Starts a recording. (This menu works only for a device supporting
recording.)
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s
title menu appears.
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
Sound is output through the receiver.
You can set the environment for using Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Anynet+ Device
Operating Status
After switching to the
device, when the menu of
the corresponding device is
displayed on the screen.
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTER buttons
Colour buttons
EXIT button
After switching to the device,
while playing a file
(Backward search)/
(Forward search)/
(Stop)/
(Play)/
(Pause)
Device with built-in Tuner
After switching to the device,
when you are watching a TV
programme
P
Audio Device
When Receiver is activated
+ / – button
MUTE button
➣
➣
➣
➣
➣
➣
➣
/
button
The Anynet+ function only works when the remote control is set to TV.
The
button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices
only using the TV remote control.
The TV remote control may not work under certain conditions. In this case, re-select the Anynet+
device.
The Anynet+ functions don’t operate for the products from other manufacturers.
In Anynet+ mode, the colour buttons may not work properly.
The
,
operations may differ depending on the device.
English - 58
BN68-01604R-00Eng-0601.indd 58
2008-06-24 ¿ÀÈÄ 4:35:19
Recording
You can make a recording of a TV programme using a recorder.
Press the
button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➣ The current TV programme is recorded in the Watching TV status. If you are watching video from
another device, the video from the device is recorded.
➣ You can also record the source streams by selecting "Record" after pressing the TOOLS button.
➣ Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device, refer to its user manual.
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1. Press the TOOLS button. Then Press the ENTER button to
select "Anynet+(HDMI-CEC)".
TV
P9
Press the ▲ or ▼ button to select "Receiver", then press the
View TV
ENTER button.
Select Device

Record

2. Press the ◄ or ► button to select to "On", then press the
Menu on Device

ENTER button.
Device Operation

Now you can listen to sound through the receiver.
Receiver :Off

3. Press the EXIT button to exit.
Setup

➣ When the receiver is set to On, you can listen to the TV sound
Move Enter
through the 2-channel receiver.
Return
➣ If the receiver is exclusively for a home theatre only
(supporting audio only), it may not appear in the device list.
➣ Only when you have connected the optical jack of the TV and the receiver properly, does Receiver
work.
➣ In case of a content with copyright problem, listening through the receiver may not properly operate.
➣ If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the
power cord or a power failure), the “TV Speaker” may be set to “Off” when you turn the TV on again.
(see page 24)
English - 59
BN68-01604R-00Eng-0601.indd 59
2008-06-24 ¿ÀÈÄ 4:35:19
Check Points before Requesting Service
Symptom
Anynet+ does not
work.
Solution
■
■
■
■
■
■
■
■
■
I want to start
Anynet+.
■
■
■
I want to exit Anynet+. ■
■
■
The Configuring
Anynet+ connection
message appears on
the screen.
The Anynet+ device
does not play.
The connected device
is not displayed.
The TV programme
cannot be recorded.
The TV sound is not
output through the
receiver.
■
■
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
Connect only one receiver.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work at a certain condition. (Searching channels, Operating
WISELINK, Plug & Play, etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to search
devices again or restart your TV.
Check if the Anynet+ Function of Anynet+ device is set on.
Check if the Anynet+ device is properly connected to the TV and check if the
Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu.
Press the TV/DTV button on the TV remote control to switch to TV. Then press
the TOOLS button to show the Anynet+ menu and select a menu you want.
Select View TV in Anynet+ menu.
Press the SOURCE button on the TV remote control and select a device other
than Anynet+ devices.
Press any of P / and PRE-CH such to change to the
TV mode. (Note that the channel button operates only when a tuner-embedded
Anynet+ device is not connected.)
You cannot use the remote control when you are configuring Anynet+ or
switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is
complete.
You cannot use the play function when Plug & Play is in progress.
■
■
■
■
■
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI
cables may not support Anynet+ functions.
■If it is terminated by an abnormal situation such as disconnecting the HDMI 1.3
cable or power cord or a power failure, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
Connect the optical cable between TV and the receiver.
English - 60
BN68-01604R-00Eng-0601.indd 60
2008-06-24 ¿ÀÈÄ 4:35:19
Teletext Feature
Most television stations provide written information services via Teletext. The index page of
the teletext service gives you information on how to use the service. In addition, you can select
various options to suit your requirements by using the remote control buttons.
➣
For teletext information to be displayed correctly, channel reception must be stable. Otherwise,
information may be missing or some pages may not be displayed.
1. (exit)
Exit from the teletext display
26 (index)
Used to display the index (contents) page at any time while you
1
are viewing teletext.
38 (store)
Used to store the teletext pages.
44 (size)
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again. To display
8
normal screen, press it once again.
9
55 (reveal)
Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.
0
2
7
6/ (teletext on/mix)
3
Press to activate teletext mode after selecting the channel
4
!
providing the teletext service. Press it twice to overlap the teletext
with the current broadcasting screen.
70 (mode)
Press to select the teletext mode (LIST/FLOF). If you press it
@
5
in the LIST mode, it switches into the List save mode. In the
List save mode, you can save teletext page into list using the
#
8(store) button.
6
81 (sub-page)
Used to display the available sub-page.
92 (page up)
Used to display the next teletext page.
03 (page down)
Used to display the previous teletext page.
!9 (hold)
Used to hold the display on a given page if the selected
page is linked with several secondary pages which follow on
automatically. To resume, press it again.
@7 (cancel)
Used to display the broadcast when searching for a page.
#Colour buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different topics covered on a teletext
page are colour-coded and can be selected by pressing the coloured buttons. Press one of them
corresponding to the required. The page is displayed with other coloured information that can be
selected in the same way. To display the previous or next page,
press the corresponding coloured button.
➣
You can change teletext pages by pressing the numeric buttons on
the remote control.
English - 61
BN68-01604R-00Eng-0601.indd 61
2008-06-24 ¿ÀÈÄ 4:35:20
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
➣
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
 Entering the page number
 Selecting a title in a list
 Selecting a coloured heading (FASTEXT system)
➣ Press the TV/DTV button to exit from the teletext display.
English - 62
BN68-01604R-00Eng-0601.indd 62
2008-06-24 ¿ÀÈÄ 4:35:20
Auto Wall-Mount (Sold separately)
Once the auto wall mount is installed, your TV’s position can be easily adjusted.
Auto Wall-Mount
TV Rear Panel
SERVICE Cable (Not supplied)
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
➣ The Auto Wall-Mount screen is displayed.
➣ If the Auto Wall-Mount screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the MENU butt on to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER button.
Setup
Plug & Play 
Language
:English 
Time 
Auto Wall-Mount 
Melody
:Off 
Entertainment : Off 
Energy Saving : Off 
PIP 
TV
• Press the ▲ or ▼ button to select “Auto Wall-Mount”, then
press the ENTER button.
Move Enter
Return
Remembering the Position
2. Adjust to the desired position using the ▲,▼,◄,► buttons.
➣ If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
➣ Press the INFO button to reset. Press the ◄ or ► button to
select “Yes”, then press the ENTER button.
The position is initialized to the default setting.
Auto Wall-Mount
Position1
Position 1 Adjust Save
3. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
➣ To not save the current position, press the RETURN button.
➣ When selecting a save mode, you cannot use the Colour
buttons.
4. Press the ENTER button to save.
➣ When Position1 is selected, the message "Current position
saved as Position1" is displayed.
2 3
INFO
Center
Save
Select a mode to Save.
Position1
Position2
Position3
Move Enter
Return
5. Press the ENTER button.
➣ The saved Position appears on the left side of the OSD.
English - 63
BN68-01604R-00Eng-0601.indd 63
2008-06-24 ¿ÀÈÄ 4:35:22
Moving to the remembered position
1. Complete Step 1 of “Entering the menu”.
Auto Wall-Mount
2. Pressing a Colour (Red, Green, Yellow) button moves the auto
wall mount to the saved position.
➣ You can move the wall mount to one of the 3 pre-set
positions by pressing the Red (Position 1),
Green (Position 2) or Yellow (Position 3) buttons.
➣ If you adjust the position after moving to a pre-set position,
the position display will disappear.
➣
➣
➣
➣
➣
Position1
Position 1 Adjust Save
2 3
INFO
Center
For installation, refer to the Installation Manual provided with the wall mount.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall. When attaching to
other building materials, please contact your nearest dealer.
The auto wall mount will not work when Anynet+ and WISELINK are operating.
37, 40 and 46 inch models are not compatible with the old electrically powered wall mount model
(WMN5090A*).
Using the Anti-Theft Kensington Lock (depending on the model)
The Kensington Lock is a device used to physically fix the system when using it in a public
place. The appearance and locking method may differ from the illustration depending on the
manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking
device has to be purchased separately.
1. Insert the locking device into the Kensington slot
on the LCD TV (Figure 1), and turn it in the locking
direction (Figure 2).
2. Connect the Kensington Lock cable.
3. Fix the Kensington Lock to a desk or a heavy
stationary object.
➣ The place of the Kensington Lock may be different
depending on its model.
Cable
Figure 2
Figure 1
<Optional>
English - 64
BN68-01604R-00Eng-0601.indd 64
2008-06-24 ¿ÀÈÄ 4:35:22
경고
주의
Securing the TV to the Wall
경고
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure
your children do not hang over or destabilize the TV; doing so may cause the TV to tip over,
주의
causing serious injuries or death. Follow all safety precautions provided on the included Safety
Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
To avoid the TV from falling:
1. Put the screws into the clamps and firmly fasten them onto
the wall. Confirm that the screws have been firmly installed
onto the wall.
➣ You may need additional material such as an anchor
depending on the type of wall.
➣ Since the necessary clamps, screws, and string are not
supplied, please purchase these additionally.
Wall
2. Remove the screws from the center back of the TV, put the
screws into the clamps, and then fasten the screws onto the
TV again.
➣ Screws may not be supplied with the product. In this
case, please purchase the screws of the following
specifications.
Screw Specifications
- For a 17 ~ 29 Inch LCD TV: M4 X 15
- For a 32 ~ 40 Inch LCD TV: M6 X 15
3. Connect the clamps fixed onto the TV and the clamps fixed
onto the wall with a strong string and then tie the string
tightly.
➣ Install the TV near to the wall so that it does not fall
backwards.
➣ It is safe to connect the string so that the clamps fixed on
the wall are equal to or lower than the clamps fixed on the
TV.
➣ Untie the string before moving the TV.
Wall
4. Verify all connections are properly secured. Periodically
check connections for any sign of fatigue for failure.
If you have any doubt about the security of your
connections,contact a professional installer.
English - 65
BN68-01604R-00Eng-0601.indd 65
2008-06-24 ¿ÀÈÄ 4:35:22
Troubleshooting: Before Contacting Service Personnel
No sound or picture
♦ Check that the mains lead has been connected to a wall socket.
♦ Check that you have pressed the button on your set.
♦ Check the picture contrast and brightness settings.
♦ Check the volume.
Normal picture but no sound
♦ Check the volume.
♦ Check whether the MUTE button has been pressed on the remote control.
♦ Check if "TV Speaker" is "on"
Screen is black and power
indicator light blinks steadily
♦ On your computer check; Power, Signal Cable.
♦ The TV is using its power management system.
♦ Move the computer’s mouse or press any key on the keyboard.
No picture or black and white ♦ Adjust the colour settings.
picture
♦ Check that the broadcast system selected is correct.
Sound and picture
interference
♦ Try to identify the electrical appliance that is affecting the set and move it
further away.
♦ Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
♦ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
♦ Replace the remote control batteries.
♦ Clean the upper edge of the remote control (transmission window).
♦ Check the battery terminals.
'Check signal cable.'
message is displayed
♦ Check that the signal cable is firmly connected to the PC or video sources.
♦ Check that the PC or video sources are turned on.
On PC mode, 'Not Supported ♦ Check the maximum resolution and the frequency of the video adaptor.
Mode.' message is displayed ♦ Compare these values with the data in the Display Modes.
The damaged picture
appears in the corner of the
screen
If "Just Scan" is selected in some external devices, the damaged picture
may appear in the corner of the screen. This symptom is caused by
external devices, not TV.
The 'Resets all settings to
the default values.' message
appears.
This appears when you press and hold the EXIT button for a while. The
product settings are reset to the factory defaults.
You may see small particles This is part of the product’s design and is not a defect.
if you look closely at the edge
of the bezel surrounding the
TV screen.
The TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated
technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will
have no impact on the performance of the product.
English - 66
BN68-01604R-00Eng-0601.indd 66
2008-06-24 ¿ÀÈÄ 4:35:23
Technical and Environmental Specifications
Model Name
LE37A615
LE40A615
37 inch
40 inch
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
10W x 2
10W x 2
923 x 84 x 597 mm
923 x 300 x 658 mm
998 x 83 x 638 mm
998 x 300 x 698 mm
18 kg
20 kg
Screen Size (Diagonal)
PC Resolution
Sound
Output
Dimensions (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
Stand Swivel
(Left / Right)
➣
➣
➣
-20˚ ~ 20˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
English - 67
BN68-01604R-00Eng-0601.indd 67
2008-06-24 ¿ÀÈÄ 4:35:23
Download PDF