Samsung | LE40C570J1S | Samsung LE46C570J1S Quick Guide

LCD TV
QUICK SETUP GUIDE
¦¦ The Supplied Accessoris
yy Remote Control & Batteries (AAA x 2)
yy Owner’s Instructions
yy Cleaning Cloth
yy Power Cord
yy Warranty Card / Safety Guide (Not available in some locations)
(46 inch TV)
yy Blanking Bracket
yy Cable tie
yy Holder-Ring (4ea)
See separate guide for installing the stand.
(M4 X L12)
yy Stand (1EA)
yy Guide Stand (1EA)
yy Screws (9EA)
¦¦ Installing Batteries in the Remote Control
✎✎NOTE
xx Use the remote control within 23 feet from
the TV.
xx Bright light may affect the performance
of the remote control. Avoid using nearby
special fluorescent light or neon signs.
xx The colour and shape may vary depending
on the model.
BN68-02801A
BN68-02800A-00
English - 1
BN68-02800A_00Eng_UK QSG.indd 1
2010-03-11 �� 7:06:56
¦¦ Installing the Stand
Preset
Step 1
Step 2
Front
Front
Rear
Rear
✎✎Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to models
(Depending on the model)
Step 1.
Step 2.
Attach your LCD TV to the stand.
Two or more people should carry the TV.
✎✎
✎✎Make sure to distinguish between the front and back of the stand when assembling them.
✎✎To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the
upper left of right sides of the TV.
Fasten two screws at position 1 and then fasten two screw at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to
one side.
✎✎
¦¦ Assembling the Cables
SOURCE 0
Enclose the cables in the Cable tie so that the cables are not visible through the transparent
stand.
Overly rigid or thick cables can damage input jacks over long term use.
HDMI
Cable tie
¦¦ Using the remote control buttons
CH LIST
MENU Button
Displays the favourites channel list.
MEDIA.P
GUIDE
ENTERE / Direction Button
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
RETURN Button
Returns to the previous menu
A
B
P.MODE
C
S.MODE
D
I-II
DUAL
EXIT Button
Exit the on-screen menu
SUBT.
English - 2
BN68-02800A_00Eng_UK QSG.indd 2
2010-03-11 �� 7:06:58
¦¦ Plug & Play
When the TV is initially powered on, basic settings proceed automatically and subsequently.
If you want to reset this feature, press the MENU button to display menu.
You can set the Plug & Play by selecting Setup → Plug & Play.
VHF/UHF Antenna
Cable
or
R-AUDIO-L
ANT OUT
PR
PB
Y
Power Input
On the screen, you can set as follows.
The each step may vary depending on the Antenna source.
✎✎
Step 1
Step 2
Plug & Play
Plug & Play
Select the OSD Language.
Menu Language
Step 3
Plug & Play
Select Country.
Select the usage mode.
: English
►
Store Demo
E Enter
Previous
Step 4
: United Kingdom
L Move E Enter
Previous
Step 5
Plug & Play
: Air
►
Channel Source
: Digital & Analogue
Auto Store in progress.
Channels 7
Digital
Analogue
Serch
Skip
U Move E Enter
►
E Enter
Step 6
Plug & Play
Plug & Play
Antenna Source
Previous
Country
Home USE
Set the Clock Mode.
3%
2
TV:2 Radio:0 Data/Other: 0
0
Clock Mode
: Auto
Previous
►
Skip
E Enter
Stop
E Enter
Step 7
Step 8
HD Connection Guide
How to get the best performance from your new HDTV.
1/2
Step 1. C
onnect the HD Box to the TV using the HDMI or Component
cables.

HD box
Plug & Play
Enjoy your TV.
TV rear view 
HDMI Cable
OK
Component Cable
Previous
Skip
r Next Page
English - 3
BN68-02800A_00Eng_UK QSG.indd 3
2010-03-11 �� 7:07:01
¦¦ Connecting a AV device
HD connection
HD connection
Using an HDMI Cable
Using a DVI Cable
DVD / Blu-Ray player / HD Cable Box
/ HD Satellite receiver (STB)
DVD / Blu-Ray player / Cable Box
/ Satellite receiver (STB)
HDMI OUT
W
R
W
R
W
R
Y
Audio/Video connection
R
R
R
B
G
B
W
G
Y
AUDIO OUT
DVI OUT
Component connection
Using an Audio/Video Cable
Using a Component Cable
Using a Scart Cable
VCR
DVD / Blu-Ray player / Cable
Box / Satellite receiver
VCR / DVD
VIDEO OUT
AUDIO OUT
AUDIO OUT
COMPONENT OUT
EXT
English - 4
BN68-02800A_00Eng_UK QSG.indd 4
2010-03-11 �� 7:07:04
Download PDF