Samsung | LE26M51B | Samsung LE46M51B Benutzerhandbuch

926E-00cover.qxd
6/14/05 9:49 AM
Page 1
LCD TV
LE26M5
LE32M5
LE40M5
LE46M5
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
BN68-00926E-00
This device is a Class B digital apparatus.
Register your product at
www.samsung.com/global/register
BN68-00926E-00Eng.qxd
6/8/05 3:52 PM
Page 2
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Digital Ready TV: When you
select the regular screen (4:3)
mode to watch an SD-grade
digital broadcast (and the Set-Top
Box output is 480p).
• Digital Ready TV: When you
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Note : If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
select the wide screen (16:9)
mode to watch an SD-grade
digital broadcast (and the Set-Top
Box output is 1080i).
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
• Digital Ready TV: When the
TV receives HD-grade signals
(and the Set-Top Box output is 1080i).
When you watch a digital HD-grade
broadcast on a regular (4:3) TV with the
screen size "16:9" or "Panorama" selected,
you will be able to watch the program but the
top and bottom edges of the screen will be
cropped.
Note : If the borders at the top, bottom and
the center of the screen remain fixed
for an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
BN68-00926E-00Eng.qxd
6/8/05 3:52 PM
Page 3
• Integrated Digital TV
(Wide-screen): When the TV
receives SD-grade (regular)
broadcasting signals (receives
480p regular signals).
• Digital Ready TV (wide-screen):
digital TV: When the TV receives
SD-grade (regular) broadcasting
signals (with a Set-Top Box).
• When you watch an analog
(regular) broadcast on a
wide-screen TV (with the 4:3 screen
mode selected).
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Note : If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
• When you watch a DVD, CD or a
video in wide-screen (21:9) format
on a wide-screen (16:9) TV.
• When you connect a computer or a
game console to the TV and select
the 4:3 screen mode.
If you connect a DVD player, computer or a
game console to the wide-screen TV and
watch a movie or play a game in regular
(4:3) or wide (21:9) screen mode, the left
and right side edges, or the top and bottom
edges of the screen will be cropped.
Note : If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
BN68-00926E-00Eng.qxd
6/8/05 2:13 PM
Page 2
Contents
CONNECTING AND PREPARING YOUR TV
Viewing the Control Panel .........................................................................................
Viewing the Connection Panel...................................................................................
- Connecting an Aerial or Cable Television Network ...............................................
- Connecting Component Devices (DTV/DVD) .......................................................
- Connecting External A/V Devices ..........................................................................
- SERVICE ................................................................................................................
- Connecting Set-Top Box, VCR or DVD .................................................................
- Connecting HDMI/DVI ............................................................................................
- Connecting Computer ............................................................................................
- Connecting AUDIO .................................................................................................
- Kensington Lock .....................................................................................................
Viewing the Remote Control (All Functions Except Teletext) ...................................
Viewing the Remote Control (Teletext Functions).....................................................
Installing Batteries in the Remote Control.................................................................
Switching On and Off .................................................................................................
Placing Your Television in Standby Mode .................................................................
Becoming Familiar with the Remote Control ............................................................
Plug and Play .............................................................................................................
Choosing Your Language ..........................................................................................
4
5
7
7
7
7
7
8
8
8
8
9
10
11
12
13
14
15
16
SETTING THE CHANNELS
Storing Channels Automatically.................................................................................
Storing Channels Manually........................................................................................
Editing the Channels..................................................................................................
Sorting the Stored Channels .....................................................................................
Assigning Channels Names ......................................................................................
Fine Tuning Channel Reception ................................................................................
17
18
20
21
22
23
SETTING THE PICTURE
Changing the Picture Standard .................................................................................
Adjusting the Custom Picture ....................................................................................
Changing the Colour Tone .........................................................................................
Resetting the Picture Settings to the Factory Defaults.............................................
Changing the Picture Size .........................................................................................
Freezing the Current Picture......................................................................................
Using the Digital NR (Digital Noise Reduction) Feature...........................................
DNIe (Digital Natural Image engine) .........................................................................
My Colour Control ......................................................................................................
Dynamic Contrast.......................................................................................................
Brightness Sensor......................................................................................................
Viewing the Picture In Picture (PIP) ..........................................................................
24
25
26
26
27
27
28
29
30
31
32
33
SETTING THE SOUND
Adjusting the Volume .................................................................................................
Switching the Sound Off Temporarily ........................................................................
Selecting the Sound Mode ........................................................................................
Changing the Sound Standard ..................................................................................
Adjusting the Sound Settings ....................................................................................
English-2
35
36
36
37
37
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 3
Contents
SETTING THE SOUND
Setting the TruSurround XT (SRS TSXT) ..........................................................
Adjusting the Volume Automatically....................................................................
Connecting Headphones ....................................................................................
Selecting the Internal Mute ................................................................................
Listening to the Sound of the Sub Picture..........................................................
38
39
40
40
41
SETTING THE TIME
Setting and Displaying the Current Time............................................................
Setting the Sleep Timer ......................................................................................
Switching the Television On and Off Automatically ............................................
Activating the Child Lock ....................................................................................
42
43
44
45
SETTING THE OTHERS
Setting the Blue Screen Mode ............................................................................
Selecting the Melody ..........................................................................................
Selecting a Device from External Sources ........................................................
Viewing Pictures from External Sources ............................................................
46
46
47
48
SETTING THE PC
Setting up Your PC Software (Based on Windows XP) ....................................
Adjusting the PC Screen Automatically ..............................................................
Coarse and Fine Tuning of the Image................................................................
Changing the Image Position..............................................................................
Initializing the Image Settings ............................................................................
49
50
51
52
53
USING THE TELETEXT FEATURE
Teletext Decoder..................................................................................................
Displaying the Teletext Information ....................................................................
Selecting a Specific Teletext Page......................................................................
Using Fastext to Select a Teletext Page ............................................................
54
54
55
56
RECOMMENDATIONS FOR USE
Troubleshooting: Before Contacting Service Personnel ....................................
Installing the Wall Mount Kit (LE26M5) ..............................................................
Installing the Wall Mount Kit (LE32M5, LE40M5, LE46M5) ..............................
Installing the Stand (LE26M5, LE32M5) ............................................................
Using the Anti-Theft Kensington Lock ................................................................
Technical and Environmental Specifications ....................................................
Display Mode (PC) ..............................................................................................
Pin Configurations ..............................................................................................
57
58
60
62
63
64
65
66
Symbols
Press
Important
Note
English-3
BN68-00926E-00Eng.qxd
6/10/05 10:12 AM
Page 4
Viewing the Control Panel
SOURCE
Displays a menu of all of the available input
sources ( TV, Ext. 1, Ext. 2, AV, S-Video,
Component, PC, HDMI).
Also used to confirm your choice on the
on-screen menu.
MENU
Press to see an on-screen menu of
your TV’s features.
+
Press to decrease or increase the volume.
Also used to select items on the
on-screen menu.
Press to change channels.
Also press to highlight various items
on the on-screen menu.
(Without the Remote Control, You can
turn on TV by using the Channel buttons.)
English-4
(Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and lights
up in stand-by mode.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
Light Detecting Sensor
Adjusts brightness of screen automatically by
detecting brightness of surrounding environment.
This sensor works when Brightness Sensor is on.
Speakers
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 5
Viewing the Connection Panel
* LE26M5
[Rear Panel Jacks]
Power Input
Whenever you connect an audio or video system to your set, ensure that all elements are
switched off.
When connecting an external device, match the colour of the connection terminal to the cable.
English-5
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 6
Viewing the Connection Panel
* LE32M5 / LE40M5 / LE46M5
[Rear Panel Jacks]
[Side Panel Jacks]
Power Input
Whenever you connect an audio or video system to your set, ensure that all elements are
switched off.
When connecting an external device, match the colour of the connection terminal to the cable.
English-6
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 7
Viewing the Connection Panel
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting Component Devices (DTV/DVD)
- Connect component video cables to component connector (“PR”, “PB”, “Y”) on the rear of your set and
the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to
the DTV (or DVD) and connect the DTV (or DVD) to component connector (“PR”, “PB”, “Y”) on your set.
- The Y, PB and PR connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y
and R-Y or Y, Cb and Cr.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output ( ) on the rear of your set. While the
headphone is connected, the sound from the built-in speakers will be disabled.
SERVICE
- Connector for engineer.
Connecting Set-Top Box, VCR or DVD
- Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box
to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Input/Output Specification
Input
Connector
Video
Audio (R/L)
S-Video
Output
RGB
Video+Audio (R/L)
SCART 1 (EXT 1)
Only TV Out
SCART 2 (EXT 2)
Monitor Out
(TV/Ext. 1/Ext. 2/AV/S-VHS)
English-7
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 8
Viewing the Connection Panel
Connecting HDMI/DVI
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players,
AV receivers and digital TVs).
- No sound connection is needed for an HDMI to HDMI connection.
What is HDMI?
- HDMI, or high-definition multimedia interface, is a next-generation interface that enables the
transmission of digital audio and video signals using a single cable without compression.
- “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of
digital audio (5.1 channels).The difference between HDMI and DVI is that the HDMI device is smaller
in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and
supports multi - channel digital audio.
- Use the HDMI/DVI terminal for DVI connection to an extended device.
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the
“R - AUDIO - L” terminal on DVI for sound output.
Connecting Computer
-
Connect the D- Sub cable to “PC (PC IN)” on the rear of your set and the other end to the Video Card of
your computer.
-
Connect the stereo audio cable to “AUDIO (PC IN)” on the rear of your set and the other end to
“Audio Out” of the sound card on your computer.
Connecting AUDIO
-
Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding
audio in connectors on the Amplifier or DVD Home Theater.
Speaker
SCART2 Out & Audio Out
RF
Scart, AV, S-Video Component, PC, HDMI RF
Scart, AV, S-Video Component, PC, HDMI
Internal Mute Off
Speaker Output
Speaker Output
Speaker Output
Sound Output
Sound Output
Sound Output
Internal Mute On
Mute
Mute
Mute
Sound Output
Sound Output
Sound Output
Video No Signal
Mute
Mute
Mute
Mute
Sound Output
Sound Output
Kensington Lock
-
Refer to “Using the Anti-Theft Kensington Lock” on page 63.
The place of the Kensington Lock may be different depending on its model.
English-8
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 9
Viewing the Remote Control (All Functions Except Teletext)
Television Standby button
(Refer to page 13)
Picture-In-Picture On / Off
(Refer to pages 33-34)
Picture freeze
(Refer to page 27)
Automatic Power-off
(Refer to page 43)
Number buttons for
direct channel access
DNIe Demo On/Off
(Refer to page 29)
Temporary sound switch-off
(Refer to page 36)
-Volume increase
-Volume decrease
(Refer to page 35)
Selects the TV mode directly
(Refer to page 48)
Displays the main on-screen menu.
(Refer to page 14)
Previous channel
Available source selection
(Refer to page 48)
-Next channel
-Previous channel
(Refer to page 14)
Use to see information on the
current broadcast.
(Refer to page 42)
Exit the on-screen menu
(Refer to page 14)
Control the cursor in the menu
(Refer to page 14)
Sound effect selection
(Refer to page 37)
Sound mode selection
(Refer to page 36)
Use to store and delete channels
to/from memory. (Refer to page 20)
Press to automatically store
selected TV/cable channels.
(Refer to page 17)
PIP FUNCTIONS
(Refer to pages 33~34)
SOURCE : Input source selection
SWAP : Interchange the main
and sub picture
SIZE
: PIP size selection
POSITION : PIP position selection
SRS TSXT selection
(Refer to page 38)
Picture effect selection
(Refer to page 24)
Picture size selection
(Refer to page 27)
Selects the PC mode directly
(Refer to pages 50~53)
When your remote does not work,
change the batteries and press the
“RESET” button for 2-3 seconds
before use.
The performance of the remote control may be affected by bright light.
English-9
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 10
Viewing the Remote Control (Teletext Functions)
Teletext display/mix both teletext
information and the normal broadcast
Teletext sub page
Teletext cancel
Teletext hold
P
P
: Teletext next page
: Teletext previous page
Teletext mode selection
(LIST/FLOF)
Exit from the teletext display
Teletext reveal
Teletext index
Teletext size selection
Teletext store
Teletext Function : Refer to pages 54-56 for details
English-10
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 11
Installing Batteries in the Remote Control
1
Slide the cover out completely.
2
Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with
the diagram inside the compartment.
3
Replace the cover.
Remove the batteries and store them in a cool, dry place
if you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work!
Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
English-11
BN68-00926E-00Eng.qxd
6/9/05 4:24 PM
Page 12
Switching On and Off
The mains lead is attached to the rear of your set.
1
Plug the mains lead into an appropriate socket.
Result:
The standby indicator lights up on the front panel.
The main voltage is indicated on the rear of your set and the
frequency is 50 or 60Hz.
2
Press the POWER
Result:
3
button on the front of the panel.
The programme that you were watching last is reselected
automatically.
Press the numeric button (0~9) or channel up/down ( / ) button
on the remote control or
button on the lower-right of
the panel.
When you switch the set on for the very first time, you will be
asked to choose language in which the menus are to be
displayed (see page 16).
4
English-12
To switch your set off, press the POWER
button again.
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 13
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power
consumption. The standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1
Press the POWER
Result:
2
button on the remote control.
The screen is turned off and a red standby indicator
appears on the front of your set.
To switch your set back on, simply press the POWER , numeric
buttons (0~9) or channel up/down ( / ) button again.
Do not leave your set in standby mode for long periods of time
(when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial.
English-13
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 14
Becoming Familiar with the Remote Control
The remote control is used mainly to:
Change channels and adjust the volume.
Set up your set using the on-screen menu system.
The following table presents the most frequently used buttons and
their functions.
Button
to
Viewing Function
Menu Function
Used to display the
next stored channel.
-
Used to display the
previous stored channel.
-
Used to display the corresponding channels.
For double digit channels, the second digit
must be pushed immediately after the first.
Failure to do this will result in a single digit
channel being displayed.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
Used to switch the sound off temporarily.
To turn the sound back on, press this button
again, or press the
/
button.
MENU
Used to display the
on-screen menu system.
EXIT
Used to return to the
previous menu or
normal viewing.
Used to exit the on-screen menu system.
Used to move among the menu items.
Used to select a menu item or increase
the value of the selected item.
Used to return to the previous menu item or
decrease the value of the selected item.
ENTER
English-14
Used to confirm your
choice.
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 15
Plug and Play
When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.
1
If the set is in standby mode, press the POWER
remote control.
Result:
2
button on the
The message Start Plug & Play. is displayed. It
appears for a little while, and then the Language menu
is automatically displayed.
Select the appropriate language by pressing the
or
button.
The available languages are listed.
You can choose one of 21 languages.
3
Press the ENTER
Result:
4
5
button.
The following areas are available:
Belgium - France - Germany - Italy Netherlands - Spain - Sweden - Switzerland United Kingdom - Eastern Europe- Others
Select your Country by pressing the
Press the ENTER
button.
Result:
6
The message Check antenna input. is displayed with
the OK selected.
Press the ENTER
Result:
button to confirm your choice.
button.
The Auto Store menu is displayed with the
Start selected.
Press the ENTER
Result:
or
button.
The channel search will start and end automatically.
7
Press the ENTER
button.
Select the hour or minute by pressing the
or
button.
Set the hour or minute by pressing the
or
button.
(Refer to “Setting and Displaying the Current Time” on page 42)
8
Press the ENTER
Result:
button to confirm your setting.
The message Enjoy your watching. is displayed, and
then the channel which has been stored will be activated.
English-15
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 16
Plug and Play
If you want to reset this feature...
1
Press the MENU
Result:
2
button.
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
The options available in the Setup group are displayed.
3
The Plug & Play is selected.
4
Press the ENTER
Result:
5
button.
The message Start Plug & Play. is displayed.
For further details on how to set, refer to the previous page.
This function doesn't work when source is in PC mode.
Choosing Your Language
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.
1
Press the MENU
Result:
2
The main menu is displayed.
Press the
Result:
button.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
4
Press the
or
button to select Language.
Press the ENTER
button.
Result:
5
button.
The available languages are listed.
Select a particular language by pressing the
repeatedly.
Press the ENTER
button.
or
button
You can choose one of 21 languages.
6
English-16
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 17
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers. However,
you can sort numbers manually and clear any channels you do not wish
to watch.
1
Press the MENU
Result:
2
Press the
Result:
3
4
The main menu is displayed.
or
button to select Channel.
The options available in the Channel group are displayed.
Press the ENTER
Result:
button.
button.
The Country is selected.
Press the ENTER
button again. Select your Country
by pressing the
or
button repeatedly.
Result:
The following countries are available:
Belgium - France - Germany - Italy Netherlands - Spain - Sweden - Switzerland United Kingdom - Eastern Europe- Others
5
Press the ENTER
6
Press the
or
button to select Auto Store.
Press the ENTER
button.
Result:
7
button.
The Auto Store menu is displayed with the Start selected.
Press the ENTER
button to search the channels. The sub menu
is changed from Start to Stop with channel search started.
Result:
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in the
frequency range (with lowest first and highest last).
The programme originally selected is then displayed.
To return to the previous menu, press the MENU
button.
To stop the search before it has finished, press the
ENTER
button with Stop selected.
8
When the channels have been stored, you can:
Sort them in the order required (refer to page 21)
Assign names to the stored channels (refer to page 22)
Add or delete the channels (refer to page 20)
Fine tune channel reception if necessary (refer to page 23)
Channels can be stored automatically by simply pressing the AUTO PROG.
button under the remote’s cover.
1
Press the AUTO PROG. button while viewing a TV programme.
Result:
2
The Auto Store menu is displayed with the Start selected.
Press the ENTER
button.
English-17
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 18
Storing Channels Manually
You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you
wish to identify.
1
Press the MENU
Result:
2
The main menu is displayed.
Press the
Result:
button.
or
button to select Channel.
The options available in the Channel group are
displayed.
3
Press the ENTER
4
Press the
or
button to select Manual Store.
Press the ENTER
button.
Result:
5
button.
The options available in the Manual Store menu are
displayed with Programme selected.
Press the ENTER
button again.
To assign a programme number to a channel, find the correct
number by pressing the
or
button and then press the
ENTER
button.
You can also set a programme number by pressing number
buttons on the remote control.
6
Press the
or
button to select Colour System and then press
the ENTER
button.
Select the colour standard required by pressing the
or
button
repeatedly and then press the ENTER
button.
Result:
7
Press the
or
button to select Sound System and then press
the ENTER
button.
Select the sound standard required by pressing the
or
button
repeatedly and then press the ENTER
button.
Result:
English-18
The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NTSC 4.43
The sound standards are displayed in the following order:
BG - DK - I - L
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 19
Storing Channels Manually
8
If you know the number of the channel to be stored,
Press the
ENTER
or
button to select Channel and then press the
button.
Select C (Air channel) or S (Cable channel) by pressing the
or
button.
Press the
button to select channel.
Select the required number by pressing the
then press the ENTER
button.
or
button and
If there is an abnormal sound or no sound, re-select the sound
system required.
Programme
: P
Colour System
: AUTO
Sound System
: BG
Channel
: C
Search
: 48 MHz
Store
: ?
You can also set a channel by pressing number buttons on the
remote control.
9
If you do not know the channel numbers, press the
or
button
to select Search and then press the ENTER
button.
Search by pressing the
or
button and then press the
ENTER
button.
Result:
10
Press the
or
button to select Store.
Select OK by pressing the ENTER
button.
Result:
11
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
The channel and associated programme number are
stored.
Repeat steps 8 to 10 for each channel to be stored.
Channel mode
P (Programme mode): When tuning is completed, the
broadcasting stations in your area will have been assigned
to position numbers from P00 to P99. You can select a
channel by entering the position number in this mode.
C (Real channel mode): You can select a channel by
entering the assigned number to each broadcast station in
this mode.
S (Cable channel mode): You can select a channel by
entering the assigned number to each cable channel in this
mode.
English-19
1
2
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 20
Editing the Channels
You can exclude the channels you chose from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1
Press the MENU
Result:
2
The options available in the Channel group are
displayed.
Press the
or
button to select Add/Delete.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Channel.
Press the ENTER
button.
Result:
3
button.
The state of the current channel is displayed.
Press the
/
add or delete.
Result:
button to select channel that you wish to
If the channel that you wish to edit is not in memory, the
Add is selected and displayed.
Otherwise, if the channel that you wish to edit is in
memory, the Delete is selected and displayed.
5
Press the ENTER
6
Press the MENU
button to return to the previous menu or press
the EXIT button to return to normal viewing.
7
Repeat steps 4 and 5 for each channel to be added or deleted.
button to add or delete channel.
You can also add or delete channel by simply pressing the
ADD/DEL button under the remote’s cover.
English-20
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 21
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Give easily remembered numbers to the channels that you
watch most often.
1
Press the MENU
Result:
2
The selected the channel number and name are moved
to right side.
Press the
or
button to move to the position in which you would
like to change and then press the ENTER
button.
Result:
6
The Prog., Ch. and Name are displayed.
Select the channel number that you wish to change by pressing the
or
button repeatedly.
Press the ENTER
button.
Result:
5
The options available in the Channel group are
displayed.
Press the
or
button to select Sort.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Channel.
Press the ENTER
button.
Result:
3
button.
The selected channel is exchanged with the one
previously stored to the chosen number.
Repeat steps 4 to 5 for another channel to be sorted.
English-21
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 22
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.
1
Press the MENU
Result:
2
The current Prog., Ch. and Name are displayed.
If necessary, select the channel to be assigned to a new name by
pressing the
or
button.
Press the ENTER
button.
Result:
5
The options available in the Channel group are
displayed.
Press the
or
button to select Name.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Channel.
Press the ENTER
button.
Result:
3
button.
The selection bar is displayed around the name box.
To...
Then...
Select a letter, number or symbol
Press the
or
Move on the next letter
Press the
button
Move back the previous letter
Press the
button
Confirm the name
Press the ENTER
button
button
The characters available are :
Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters ( _, space)
English22
6
Repeat steps 4 to 5 for each channel to be assigned to a new name.
7
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 23
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If, however, the signal is weak or distorted, you may have to fine-tune
the channel manually.
Select the channel that you want to fine tune.
1
Press the MENU
Result:
2
The options available in the Channel group are
displayed.
Press the
or
button to select Fine Tune.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Channel.
Press the ENTER
button.
Result:
3
button.
The horizontal bar is displayed.
Press the
or
button to reach the required setting.
Press the ENTER
button.
Result:
An asterisk “*” appears on the right-hand side of the
channel number. The channel number turns red.
To reset the fine-tuning, select Reset by pressing the
button and then press the ENTER
button.
5
or
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
Fine tuned channels that have been saved are marked with an
asterisk “*” on the right-hand side of the channel number in the
channel banner. And the channel number turns red.
English-23
BN68-00926E-00Eng.qxd
6/8/05 2:14 PM
Page 24
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
button.
4
Press the ENTER
button again.
Result:
5
Press the ENTER
Result:
6
button.
The Mode is selected.
Select the required picture effect by pressing the
repeatedly.
Result:
7
The options available in the Mode group are displayed.
or
The following picture effects are available:
Dynamic - Standard - Movie - Custom
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
You can also display by simply pressing the P.MODE
(Picture Mode) button.
English-24
button
BN68-00926E-00Eng.qxd
6/8/05 2:15 PM
Page 25
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
button.
4
Press the ENTER
button again.
Result:
5
The options available in the Mode group are displayed.
Select the option (Contrast, Brightness, Sharpness, Colour,
Tint) to be adjusted by pressing the
or
button.
Press the ENTER
button.
Result:
The horizontal bar is displayed.
6
Press the
or
button to reach the required setting.
Press the ENTER
button.
7
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
The adjusted values are stored according to the selected
Picture mode.
Each adjusted setting will be stored separately according to its
input mode.
The Tint is "inactivated" as following cases.
• Analog mode (RF, Scart, Video, S-Video)
In case of an input signal setting to PAL-50, PAL-CN,
and SECAM.
• Component, DVI, and HDMI mode
In case of an input signal setting to 60HZ; 480i, 480p,
720p @60Hz, 1080i @60Hz.
English-25
BN68-00926E-00Eng.qxd
6/8/05 2:15 PM
Page 26
Changing the Colour Tone
You can select the most comfortable colour tone to your eye.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
button.
4
Press the ENTER
button again.
Result:
5
Press the
or
button to select Colour Tone and press the
ENTER
button. Select the required option by pressing the
or
button repeatedly. Press the ENTER
button.
Result:
6
The options available in the Mode group are displayed.
The following options are available:
Cool2 - Cool1 - Normal - Warm1 - Warm2
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
The adjusted values are stored according to the selected
Picture mode.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
button.
4
Press the ENTER
button again.
Result:
The options available in the Mode group are displayed.
5
Press the
ENTER
6
Press the EXIT button to return to normal viewing.
or
buttons to select Reset, then press the
button.
The Reset will be set each picture mode.
English-26
BN68-00926E-01Eng.qxd
6/10/05 10:12 AM
Page 27
Changing the Picture Size
You can select the picture size which best corresponds to your viewing
requirements.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
button.
5
Select the required option by pressing the
repeatedly.
Press the ENTER
button.
Result:
or
button.
button to select Size and press the ENTER
or
button
The following options are available:
Auto Wide - Wide - Panorama - Zoom - 4:3
• Auto Wide: Automatically adjusts the picture size to the “Wide”
aspect ratio.
Wide:
Adjusts the picture size to 16:9 appropriate for DVDs or
•
wide broadcasting.
• Panorama: Adjusts 16:9 to 4:3 in a natural way as for normal
broadcasting.
Zoom:
Magnifies
the 16:9 wide picture (in the vertical direction) to
•
fit the screen size. Select
by pressing the
or
button. Use the
or
button to move the picture up and
down. After selecting
, use the
or
button to
magnify or reduce the picture size in the vertical direction.
This is the default setting for a video movie or normal
• 4:3:
broadcasting.
You can select these options by simply pressing the
P.SIZE (Picture Size) button under the remote’s cover.
In PC Mode, only Wide and 4:3 mode can be adjusted.
If you press P.SIZE (Picture Size) button when PIP is set to
on, PIP function will be cancelled and the picture size will be
changed (except PC mode).
Freezing the Current Picture
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
English-27
BN68-00926E-00Eng.qxd
6/8/05 2:15 PM
Page 28
Using the Digital NR (Digital Noise Reduction) Feature
If the signal received by your television is weak, you can activate
this feature to help reduce any static and ghosting that may appear
on the screen.
1
Press the MENU
Result:
2
Press the
Result:
English-28
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
or
button to select Digital NR.
Press the ENTER
button.
5
Press the
or
button to select On.
Press the ENTER
button.
6
Press the EXIT button to return to normal viewing.
button.
BN68-00926E-00Eng.qxd
6/8/05 2:15 PM
Page 29
DNIe (Digital Natural Image engine)
Samsung’s new technology brings you more detailed images with
contrast and white enhancement. A new image compensation algorithm
gives viewers brighter and clearer images.
DNIe technology will match every signal to your eyes.
You can see how DNIe improves the picture by setting DNIe Demo mode
to On.
1
Press the MENU
Result:
2
The main menu is displayed.
Press the
Result:
button.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
or
button to select DNIe Demo and then press the
ENTER
button.
Press the
or
button to select On.
Press the ENTER
button.
button.
DNIe Demo: Off
DNIe Demo mode is deactivated.
DNIe Demo: On
The right-hand side of the screen shows improved DNle
image. The left-hand side of the screen shows the
original image.
You can also select these options by simply pressing the
DNIe button.
5
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
This function doesn’t work when source is in PC mode.
The DNle Demo is designed to show the difference between
the regular and DNIe pictures.
By default, the product displays the picture with DNle applied.
English-29
BN68-00926E-00Eng.qxd
6/8/05 2:15 PM
Page 30
My Colour Control
My Colour Control is to adjust the most preferred colours such as Blue,
Green, Pink without interfering with other colours in order for each
consumer to enjoy the screen colour of his/her choice.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
or
button to select My Colour Control and then
press the ENTER
button.
Result:
5
Press the
ENTER
the
or
Result:
6
Press the
ENTER
the
or
Result:
button.
The options available in the My Colour Control menu
are displayed.
or
button to select Easy Control and press the
button. Select a source of the sub picture by pressing
button and press the ENTER
button.
The sources are displayed in the following order:
Blue - Green - Pink - Standard - Custom
or
button to select Detail Control and press the
button. Select a source of the sub picture by pressing
button and press the ENTER
button.
The sources are displayed in the following order:
Pink - Green - Blue- Reset
7
Press the
or
button to reach the required setting.
Press the ENTER
button.
8
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
This function captures the current screen in a still image to adjust
the colour.
This function doesn't work when source is in PC mode.
To return to the factory default settings for My Colour Control
colours, select Reset by pressing the
or
button and then
press the ENTER
button.
English-30
BN68-00926E-00Eng.qxd
6/8/05 2:15 PM
Page 31
Dynamic Contrast
Dynamic Contrast is to automatically detect distribution of inputted
visual signal and adjust to create optimum contrast.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
or
button to select Dynamic Contrast.
Press the ENTER
button.
Result:
button.
The Dynamic Contrast menu is displayed.
5
Select On by pressing the
or
Press the ENTER
button.
6
When it has finished, press the EXIT button to return to normal
viewing.
button.
This function doesn't work when source is in PC mode or
PIP is set to on.
English-31
BN68-00926E-00Eng.qxd
6/8/05 2:15 PM
Page 32
Brightness Sensor
Brightness Sensor is to adjust brightness of screen either automatically
or manually by detecting brightness of surrounding environment using
light detecting sensor.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
or
button to select Brightness Sensor.
Press the ENTER
button.
Result:
5
The Brightness Sensor menu is displayed.
Select On by pressing the
or
Press the ENTER
button.
Result:
6
button.
button.
Brightness on the screen is adjusted automatically
according to brightness of surrounding environment.
When it has finished, press the ENTER
button to return to the
previous menu or press the EXIT button to return to normal
viewing.
This function doesn't work when source is in PC mode.
English-32
BN68-00926E-00Eng.qxd
6/8/05 2:15 PM
Page 33
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set programme
or video input. In this way, you can watch the picture of set programme
or video input from any connected equipment while watching the main
picture.
1
Press the MENU
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
ENTER
Result:
5
6
button.
or
button to select PIP and then press the
button.
The options available in the PIP menu are displayed.
Press the ENTER
button again.
Select On by pressing the
or
button and then press the
ENTER
button.
Press the
ENTER
the
or
Result:
7
button.
[TV/Ext. 1/Ext. 2/AV/S-Video/Component]
or
button to select Source and press the
button. Select a source of the sub picture by pressing
button and press the ENTER
button.
The sources are displayed in the following order:
When the main picture is set to TV/Ext.1/Ext.2/AV/
S-Video/Component, only HDMI can be selected and
when the main picture is set to PC/HDMI, TV/Ext.1/
Ext.2/AV/S-Video/Component can be selected.
[PC/HDMI]
Press the
or
button to select Swap.
To interchange the main picture and the sub picture, select Swap
option and press the ENTER
button.
Result:
The main picture and the sub picture are interchanged.
If main picture is in PC mode, Swap is not available.
8
Press the
or
button to select Size of the sub picture and then
press the ENTER
button.
Select a size of the sub picture by pressing the
or
button and
then press the ENTER
button.
Result:
The sizes are displayed in the following order:
-
-
If main picture is in PC mode, Size is not available.
English-33
BN68-00926E-00Eng.qxd
6/8/05 2:15 PM
Page 34
Viewing the Picture In Picture (PIP)
9
Press the
or
button to select Position and then press the
ENTER
button.
Select the position of the sub picture by pressing the
or
button
and then press the ENTER
button.
Result:
You can move the sub picture.
When the size of the sub picture is set to
or
, this feature does not work.
[PC/HDMI]
PIP
Source
Swap
Size
Position
Programme
: On
: TV
:
:
:
10
01
Press the
or
button to select Programme and then press the
ENTER
button. You can select the channel that you want to view
through sub picture by pressing the
or
button.
Press the ENTER
button.
Result:
The memorized Programme is displayed.
Main: PC/HDMI, Sub: TV
“Programme” is inactive and not available in TV mode.
However, it becomes active and available in PC/HDMI
mode.
11
To return to normal viewing, press the EXIT button.
Remote-control functions while "PIP" is "On":
Features
Description
PIP
Used to operate On/Off function of PIP
directly.
SOURCE
Used to select a source of the sub picture.
SWAP
Used to interchange the main picture and the
sub picture.
When the main picture is in the video
mode and the sub picture is in the TV
mode, you might not hear the sound of
the main picture when pressing the
SWAP button after changing the sub
picture channel. At this time, reselect the
main picture channel.
POSITION
You also move the sub picture simply
by pressing the POSITION button.
SIZE
Select a size of the sub picture by pressing the
SIZE button.
PIP Settings
Sub
S-Video Component
PIP operates
PIP doesn’t operate
TV
Ext.1
Ext.2
AV
PC
HDMI
TV
X
X
X
X
X
X
X
O
Ext.1
X
X
X
X
X
X
X
O
Ext.2
X
X
X
X
X
X
X
O
AV
X
X
X
X
X
X
X
O
S-Video
X
X
X
X
X
X
X
O
Component
X
X
X
X
X
X
X
O
PC
O
O
O
O
O
O
X
X
HDMI
O
O
O
O
O
O
X
X
Main
English-34
O:
X:
BN68-00926E-00Eng.qxd
6/8/05 2:15 PM
Page 35
Adjusting the Volume
You can adjust the volume using your remote control.
Press the
Result:
Press the
Result:
button to increase the volume.
A horizontal bar is displayed and the volume increases
until you release the button. The cursor moves to the right
to indicate the volume.
button to decrease the volume.
A horizontal bar is displayed and the volume decreases
until you release the button. The cursor moves to the left
to indicate the volume.
Additional sound adjustments are available on your set.
For further details, refer to pages 36 to 41.
English-35
BN68-00926E-00Eng.qxd
6/8/05 2:27 PM
Page 36
Switching the Sound Off Temporarily
You can switch the sound off temporarily.
Example: You wish to answer the telephone.
1
Press the MUTE
Result:
2
button.
The sound is switched off and “Mute” is displayed.
When you wish to turn the sound back on, press the MUTE
button again or either of the volume buttons.
Result:
The sound comes back on as the same volume as
before and the “Mute” indication disappears.
Selecting the Sound Mode
You can set the sound mode by pressing the "DUAL" button.
When you press it, the current sound mode is displayed on the screen.
FM
Stereo
Audio Type
DUAL 1/2
Mono
MONO
Stereo
STEREO
MONO
Automatic
change
Dual
DUAL 1
DUAL 2
DUAL 1
Mono
Stereo
NICAM
Stereo
Default
Dual
MONO
MONO
STEREO
MONO
DUAL 1
Automatic
change
DUAL 1
DUAL 2
If the receiving conditions deteriorate, listening will be easier
if the mode is set to Mono.
If the stereo signal is weak and automatic switching occurs,
switch to Mono.
English-36
BN68-00926E-00Eng.qxd
6/8/05 2:27 PM
Page 37
Changing the Sound Standard
You can select the type of the special sound effect to be used when
watching a given broadcast.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button again.
Result:
5
Select the required sound effect by pressing the
or
repeatedly and then press the ENTER
button.
Result:
6
The Mode is selected.
button
The following sound effects are available:
Standard - Music - Movie - Speech - Custom
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
You can also select these options by simply pressing the
S.MODE (Sound Mode) button on the remote control.
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
4
Select Equalizer by pressing the
the ENTER
button.
5
Select the required option by pressing the
6
Press the
or
button to reach the required setting.
Press the ENTER
button.
7
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
button.
or
button and then press
or
button.
If you make any changes to these settings, the Sound Mode is
automatically switched to Custom.
English-37
BN68-00926E-00Eng.qxd
6/8/05 2:27 PM
Page 38
Setting the TruSurround XT (SRS TSXT)
TruSurround XT is a patented SRS technology that solves the problem
of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling,virtual surround sound experience
through any two-speaker playback system, including internal television
speakers. It is fully compatible with all multichannel formats.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
4
Press the
or
button to select SRS TSXT and then
press the ENTER
button.
5
Select the required option by pressing the
Press the ENTER
button.
Result:
6
button.
or
button.
The sources are displayed in the following order:
Off - 3D Mono - Stereo
Press the EXIT button to return to normal viewing.
You can also set these options simply by pressing the SRS button
on remote control.
TruSurround XT, SRS and
symbol are trademarks of SRS Labs,
Inc. TruSurround XT technology is incorporated under license from
SRS Labs, Inc.
English-38
BN68-00926E-00Eng.qxd
6/8/05 2:27 PM
Page 39
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it is not
easy for you to adjust the volume every time the channel is changed.
This feature let you automatically adjust the volume of the desired
channel by lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation signal is low.
1
Press the MENU
Result:
2
button.
The main menu is displayed.
Press the
or
button to select Sound.
Press the ENTER
button.
Result:
The options available in the Sound group are displayed.
3
Press the
or
button to select Auto Volume.
Press the ENTER
button.
4
Press the
or
button to select On.
Press the ENTER
button.
5
Press the EXIT button to return to normal viewing.
English-39
BN68-00926E-00Eng.qxd
6/8/05 2:27 PM
Page 40
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel
of the set.
The sound is heard through the headphones.
Result:
For further details on how to set your headphone preferences,
refer to the section below.
When you insert the head set jack into the corresponding port,
you can operate only SRS TSXT, Internal Mute and
Sound Select (in PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may damage
your hearing.
You will not receive sound from the speakers when you
connect headphones to the system.
Selecting the Internal Mute
If you want to hear the sound through separate speakers,
cancel the internal amplifier.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
4
Press the
or
button to select Internal Mute.
Press the ENTER
button.
5
Press the
or
button to select On.
Press the ENTER
button.
6
Press the EXIT button to return to normal viewing.
button.
When Internal Mute is set to On, the Sound menus except for
Sound Select (in PIP mode) cannot be adjusted.
English-40
BN68-00926E-00Eng.qxd
6/8/05 2:27 PM
Page 41
Listening to the Sound of the Sub Picture
During the PIP feature is activating, you can listen to the sound of the
sub picture.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
4
Press the
or
button to select Sound Select and then press
the ENTER
button.
Result:
button.
Main and Sub are displayed.
You can select this option when the PIP is in “On”.
5
Select the Sub by pressing the
Press the ENTER
button.
Result:
or
button.
You can listen to the sound of the sub picture.
To listen the sound of the current main picture, set to Main.
English-41
BN68-00926E-00Eng.qxd
6/8/05 2:27 PM
Page 42
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is displayed when
you press the INFO button. You must also set the time if you wish to
use the automatic On/Off timers.
If you disconnect the power cord, you have to set the clock
again.
1
Press the MENU
Result:
2
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
The options available in the Setup group are displayed.
Press the
or
button to select Time.
Press the ENTER
button.
Result:
The Time menu is displayed with Clock Set selected.
4
Press the ENTER
5
To...
button.
Press the...
Move to Hour or Minute
or
button
Set the Hour or Minute
or
button
Press the ENTER
button.
6
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
7
To display the...
Press the...
Current time and selected audio/video
setting status
INFO button
You can also set hour and minute by pressing the number buttons
on the remote control.
English-42
BN68-00926E-00Eng.qxd
6/8/05 2:27 PM
Page 43
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after which
the television automatically switches to standby mode.
1
Press the MENU
Result:
2
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
The options available in the Setup group are displayed.
Press the
or
button to select Time.
Press the ENTER
button.
Result:
The Time menu is displayed with Clock Set selected.
4
Press the
or
button to select Sleep Timer.
Press the ENTER
button.
5
Press the
or
button repeatedly and cycle through the preset
time intervals (Off, 30, 60, 90, 120, 150, 180).
Press the ENTER
button.
Result:
The TV automatically switches to standby mode when the
timer reaches 0.
6
To cancel the sleep timer function, select Off by pressing the
or
button and then press the ENTER
button.
7
Press the EXIT button to return to normal viewing.
You can set the sleep timer by simply pressing the SLEEP button on the
remote control.
1
Press the SLEEP button on the remote control.
Result:
2
If the sleep timer is not yet set, Off is displayed.
Otherwise, the remaining time before which the television
switches to standby mode is displayed.
Select the preset time interval for staying on by pressing the SLEEP
button repeatedly.
English-43
BN68-00926E-00Eng.qxd
6/8/05 2:28 PM
Page 44
Switching the Television On and Off Automatically
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your
choice at the time you select.
Switch off automatically at the time you select.
The first step is to set the television’s clock
(refer to “Setting and Displaying the Current Time” on page 42 ).
1
Press the MENU
Result:
2
The Time menu is displayed with Clock Set selected.
Press the
or
button to select On Timer.
Press the ENTER
button.
Result:
5
The options available in the Setup group are displayed.
Press the
or
button to select Time.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
The On Timer menu is displayed.
Set the time, channel and volume level at which you wish the set to
be switched on.
To...
Move to Hour, Minute, Programme, and Volume
or
button
Set Hour, Minute, Programme, and Volume
or
button
Move to Activation
or
button
Select Yes to enable above setting
or
button
Press the ENTER
6
Press the...
button.
Press the
or
button to select Off Timer.
In the same way, set the time at which you wish the set to
be switched off automatically.
You can also set hour and minute by pressing the number
buttons on the remote control.
English-44
BN68-00926E-00Eng.qxd
6/8/05 2:28 PM
Page 45
Activating the Child Lock
This feature allows you to prevent unauthorized users, such as children,
from watching unsuitable programmes by muting out video and audio.
Child Lock cannot be released using the buttons on the lower-right
panel. Only the remote control can release the Child Lock setting, so
keep the remote control away from children.
This function does not work in PC mode.
1
Press the MENU
Result:
2
The options available in the Setup group are displayed.
Press the
or
button to select Child Lock.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
The options available in the Child Lock group are
displayed.
Press the ENTER
Result:
button again.
The Child Lock is selected.
5
Press the
or
button to select On.
Press the ENTER
button.
6
Press the
or
button to select Programme.
Press the ENTER
button.
7
Press the
or
button to select the channels to lock.
Press the ENTER
button.
8
Press the
or
button to select Lock.
Press the ENTER
button.
9
Press the
or
button to select Locked to lock the channels.
Press the ENTER
button.
10
Repeat steps 6 and 9 for each channel to be locked or unlocked.
11
Press the EXIT button to return to normal viewing.
English-45
BN68-00926E-00Eng.qxd
6/8/05 2:28 PM
Page 46
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
"Blue Screen" mode to "Off".
1
Press the MENU
Result:
2
button.
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
The options available in the Setup group are displayed.
3
Press the
or
button to select Blue Screen.
Press the ENTER
button.
4
Press the
or
button to select On.
Press the ENTER
button.
5
Press the EXIT button to return to normal viewing.
Selecting the Melody
You can hear melody sound when the television is powered on or off.
1
Press the MENU
Result:
2
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
English-46
button.
The options available in the Setup group are displayed.
3
Press the
or
button to select Melody.
Press the ENTER
button.
4
Press the
or
button to select On.
Press the ENTER
button.
5
Press the EXIT button to return to normal viewing.
BN68-00926E-00Eng.qxd
6/8/05 2:28 PM
Page 47
Selecting a Device from External Sources
Your set enables you to choose which audio/video signals are output to
the external connector.
1
Press the MENU
Press the ENTER
Result:
button.
button to select Input.
The options available in the Input group are displayed.
2
Press the ENTER
button.
The options available in the Source List menu are
Result:
displayed.
When no external device is connected to your set,
only TV, Ext.1, Ext.2 are activated in the
Source List. AV, S-Video, Component, PC,
HDMI are activated only when they are connected
to your set.
3
Select the required device by pressing the
Press the ENTER
button.
4
Repeat step 1.
Press the
or
button to select Edit Name.
Press the ENTER
button.
The options available in the Edit Name menu are
Result:
displayed.
5
Select the device that you wish to edit by pressing the
or
button.
The following options are available:
Result:
Ext.1 - Ext.2 - AV - S-Video - Component - PC - HDMI
6
Press the ENTER
7
Select the required device by pressing the
or
button
repeatedly.
Press the ENTER
button.
The following options are available:
Result:
---- - VCR - DVD - D-VHS - Cable STB - HD STB Satellite STB - AV Receiver - DVD Receiver - Game Camcorder - DVD Combo - DHR - PC
8
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
or
button.
button.
DHR: DVD HDD Recorder
English-47
BN68-00926E-00Eng.qxd
6/8/05 2:28 PM
Page 48
Viewing Pictures from External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1
Check that all the necessary connections have been made.
2
Press the SOURCE button.
Result:
3
The edited device and audio status are displayed on topleft of the set.
Press the SOURCE button until the required input source is selected.
If you change the external source while viewing, pictures
might take a short period of time to be switched.
TV mode can be selected by pressing the TV or
/
button on the
remote control but you cannot select it by pressing the SOURCE
button.
English-48
BN68-00926E-00Eng.qxd
6/8/05 2:28 PM
Page 49
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screen look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1
First, click on “Control Panel” on the Windows start menu.
2
When the control panel window appears, click on
“Appearance and Themes” and a display
dialog-box will appear.
3
When the control panel window appears, click on
“Display” and a display dialog-box will appear.
4
Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution)
Optimum- 1360 x 768
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
*See “Display Modes” on page 65.
English-49
BN68-00926E-00Eng.qxd
6/8/05 2:28 PM
Page 50
Adjusting the PC Screen Automatically
Auto adjustment allows the PC screen of set to self-adjust to the
incoming PC video signal.
The values of fine, coarse and position are adjusted automatically.
Press the PC button under the remote’s cover to select the PC mode.
1
Press the MENU
Result:
2
The options available in the PC menu are displayed.
Press the
or
button to select Auto Adjustment.
Press the ENTER
button.
Result:
English-50
The options available in the Setup group are displayed.
Press the
or
button to select PC.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
The screen quality and position are automatically
adjusted.
BN68-00926E00Eng.qxd
6/8/05 2:29 PM
Page 51
Coarse and Fine Tuning of the Image
The purpose of picture quality adjustment is to remove or reduce
picture noise. If the noise is not removed by Fine-tuning alone, then
adjust the frequency as best as possible (coarse) and Fine-tune again.
After the noise has been reduced, re-adjust the picture so that it is
aligned on the center of screen.
Press the PC button under the remote’s cover to select the PC mode.
1
Press the MENU
Result:
2
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
The options available in the PC menu are displayed.
Press the ENTER
Result:
5
The options available in the Setup group are displayed.
Press the
or
button to select PC.
Press the ENTER
button.
Result:
4
button.
The main menu is displayed.
button again.
The Image Lock menu is selected.
Press the
or
button to select Coarse or Fine.
Press the ENTER
button.
Result:
The horizontal bar is displayed.
6
Press the
or
button to adjust the screen quality.
Press the ENTER
button.
Vertical stripes may appear or the picture may become blurry.
7
When you are satisfied with the settings, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
English-51
BN68-00926E-00Eng.qxd
6/8/05 2:29 PM
Page 52
Changing the Image Position
Press the PC button under the remote’s cover to select the PC mode.
1
Press the MENU
Result:
2
The options available in the PC menu are displayed.
Press the
or
button to select Position.
Press the ENTER
button.
Result:
English-52
The options available in the Setup group are displayed.
Press the
or
button to select PC.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
You can adjust the image Position.
5
Press the
or
button to adjust horizontal position.
Press the
or
button to adjust vertical position.
Press the ENTER
button.
6
Press the MENU
button to return to the previous menu or press
the EXIT button to return to normal viewing.
BN68-00926E-00Eng.qxd
6/8/05 2:29 PM
Page 53
Initializing the Image Settings
You can replace all image settings with the factory default values.
Press the PC button under the remote’s cover to select the PC mode.
1
Press the MENU
Result:
2
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
The options available in the PC menu are displayed.
Press the
or
button to select Image Reset.
Press the ENTER
button.
Result:
5
The options available in the Setup group are displayed.
Press the
or
button to select PC.
Press the ENTER
button.
Result:
4
button.
The main menu is displayed.
You can initialize all image setting to the factory default
values.
Press the MENU
button to return to the previous menu or press
the EXIT button to return to normal viewing.
English-53
BN68-00926E-00Eng.qxd
6/8/05 2:29 PM
Page 54
Teletext Decoder
Most set channels carry “ teletext ”, pages of written information that
provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:
Part
Contents
A
B
C
D
E
F
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
Status information.
Displaying the Teletext Information
You can display teletext information at any time, but signal reception
must be good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the teletext mode and display the contents page:
1
Using the
( ) or
teletext service.
2
Press the TTX/MIX (
Result:
3
4
) button to activate the teletext mode.
/
) button again.
The screen will split into two. This Double Teletext feature
lets you view the actual broadcast and teletext
information separately on the screen.
Press the TTX/MIX (
Result:
/
) button, select the channel providing the
The contents page is displayed. It can be redisplayed at
any time by pressing the MENU ( ) button.
Press the TTX/MIX (
Result:
(
/
) button again.
The actual broadcast will be displayed simultaneously
with the teletext page on the screen.
5
To return to normal viewing, press the PIP (
6
Press the TV(
) button.
) button again to exit from the Text display.
If any broken character appears while Text is being viewed,
make sure that the Text language is identical with the language in the
“Setup” menu mode. If both languages are different, select the same
language with the Text language on the “Setup” menu.
English-54
BN68-00926E-00Eng.qxd
6/8/05 2:29 PM
Page 55
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the page
number directly:
1
Enter the three-digit page number listed in the contents by pressing the
corresponding numeric buttons.
Result:
The current page counter is incremented and the page is
then displayed.
2
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display on
a given page, press the PRE-CH ( ).
Press the PRE-CH ( ) button again to resume.
3
Using the various display options:
To display...
Press the...
Both teletext information and
the normal broadcast
TTX/MIX (
)
Hidden text
(answers to quiz games, for example)
INFO (
)
The normal screen
INFO (
) again
A secondary page,
by entering its 4-digit number
SLEEP (
The next page
Page Up (
The previous page
Page Down (
Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
SIZE (
•Once
•Twice
Normal screen
•Three times
/
)
)
)
)
English-55
BN68-00926E-00Eng.qxd
6/8/05 2:29 PM
Page 56
Using Fastext to Select a Teletext Page
The various topics included in the teletext pages are colour-coded, and
can be selected by pressing the coloured buttons on the remote control.
1
Display the teletext contents page by pressing the
TTX/MIX ( / ) button.
2
Press the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line).
Result:
3
4
English-56
The page is displayed with additional colour-coded
information that can be selected in the same way.
To display the:
Press the:
Previous page
Red button.
Next page
Green button.
When you have finished, press the PIP (
normal broadcast.
) button to return to the
BN68-00926E-00Eng.qxd
6/8/05 2:29 PM
Page 57
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of your
set and contact your local dealer.
No sound or picture
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the POWER buttons on the lower-right
panel.
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no sound
Check the volume.
Check whether the MUTE
button has been pressed on the remote control.
Check if Internal Mute is off
No picture or black and white picture
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture interference
Try to identify the electrical appliance that is affecting the set and move it
further away.
Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
“Check signal cable.” message is displayed.
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
On PC mode, “Not Supported Mode.”
message is displayed.
Check the maximum resolution and the frequency of the video adapter.
Compare these values with the data in the Display Modes.
The image is too light or too dark.
Adjust the Brightness and Contrast.
On PC mode, horizontal bars appear to flicker,
jitter or shimmer on the image.
Adjust the Fine function.
On PC mode, vertical bars appear to flicker,
jitter or shimmer on the image.
Adjust the Coarse function and then adjust the Fine function.
On PC mode, screen is black and power
indicator light blinks every 1 second.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
On PC mode, image is not stable and
may appear to vibrate.
Check that the display resolution and frequency from your computer or
video board is an available mode for your set. On your computer check:
Control Panel, Display, Settings.
If the setting is not correct, use your computer utility programme to change
the display settings.
Your set supports multiscan display functions within the following
frequency domain:
Horizontal frequency(kHz): 30~ 61
Vertical frequency(Hz): 60~75
Maximum refresh rate (at 60Hz): 1360 X 768
On PC mode, image is not centered
on the screen.
Adjust the horizontal and vertical position.
The TFT LCD panel uses a panel consisting of sub pixels (3,147,264) which require sophisticated technology to produce. However,
there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
English-57
BN68-00926E-00Eng.qxd
6/8/05 2:29 PM
Page 58
Installing the Wall Mount Kit (LE26M5)
This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components (Sold separately)
M4 X L15
Wall-Bracket
Set-Bracket
Screw: 8EA
Anchor: 4EA
Installation Guide
M4 X L20
Wood Screw: 4EA
How to assemble the Wall Mount Bracket
1
Mark the location of hole on the wall.
Drill a hole of 35mm depth on the marked
location.
Fix anchors on each hole on the wall.
Connect wall-bracket to the wall with wood
screws after fitting anchors into the
wall-bracket .
Note: If the bracket is not firmly fixed to the wall,
LCD TV can fall off.
English-58
BN68-00926E-00Eng.qxd
6/8/05 2:29 PM
Page 59
Installing the Wall Mount Kit (LE26M5)
How to assemble the Wall Mount Bracket
2
3
Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Remove the four screws from the back of the TV.
Separate the stand from the TV.
Cover the bottom hole with a cap
Attach the set-bracket onto the rear side of the TV set and secure the screws
Insert three Hangers of the set-bracket into the grooves of the wall-bracket
Fix set-bracket and wall-bracket with screws .
.
.
Note: Before installing the set on the wall, connect the cables to the set first.
English-59
BN68-00926E-00Eng.qxd
6/8/05 2:29 PM
Page 60
Installing the Wall Mount Kit (LE32M5, LE40M5, LE46M5)
This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components (Sold separately)
M6 X L14
Wall-Bracket
Set-Bracket
M4 X L25
Wood Screw: 7EA
M4 X L8
Anchor: 7EA
How to assemble the Wall Mount Bracket
1
Mark the location of hole on the wall.
Drill a hole of 35mm depth on the marked
location.
Fix anchors on each hole on the wall.
Connect wall-bracket to the wall with wood
screws after fitting anchors into the
wall-bracket .
Note: If the bracket is not firmly fixed to the wall,
LCD TV can fall off.
English-60
Screw: 8EA
Screw: 3EA
Installation Guide
BN68-00926E-00Eng.qxd
6/10/05 9:49 AM
Page 61
Installing the Wall Mount Kit (LE32M5, LE40M5, LE46M5)
How to assemble the Wall Mount Bracket
2
Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Remove the four screws from the back of the TV.
Separate the stand from the TV.
Cover the bottom hole with a cap
Loosen two screws on the rear side of the TV set (only model LE40M5 applied).
Attach the set-bracket onto the rear side of the TV set and secure the screws .
For 40 inches model, attach the bracket into the two holes with the two screws removed
in step 6 above.
(Only Model LE40M5 Applied)
3
Insert three Hangers of the set-bracket into the grooves of the wall-bracket
Fix set-bracket and wall-bracket with screws .
.
Note: Before installing the set on the wall, connect the cables to the set first.
English-61
BN68-00926E-00Eng.qxd
6/8/05 2:30 PM
Page 62
Installing the Stand (LE26M5, LE32M5)
<2>
<3>
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Attach the stand to the TV set as shown in the picture.
3. Use the four screws to tightly fix the stand.
English-62
BN68-00926E-00Eng.qxd
6/8/05 2:30 PM
Page 63
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may differ from
the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock
for proper use.
Cable
Figure 2
Figure 1
<Optional>
The place of the Kensington Lock may be different depending on its model.
1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction
(Figure 2).
2. Connect the Kensington lock cable.
3. Fix the Kensington lock to a desk or a heavy stationary object.
English-63
BN68-00926E-01Eng.qxd
6/13/05 6:36 PM
Page 64
Technical and Environmental Specifications
Model Name
LE26M5
LE32M5
LE40M5
LE46M5
Viewing Angle
Resolution
26" Diagonal (16:9)
575.77(H) x 323.71(V) mm
(22.67(H) x 12.74(V) inches)
a-si TFT active matrix
0.4215(H) x 0.4215(V) mm
(0.0166(H) x 0.0166(V) inches)
170/170 (H/V)
1366(H) x 768(V)
32" Diagonal (16:9)
697.68 (H) x 392.26 (V) mm
(27.47 (H) x 15.44 (V) inches)
a-si TFT active matrix
0.511 (H) x 0.511 (V) mm
(0.0201 (H) x 0.0201(V) inches)
170/170 (H/V)
1366 (H) x 768 (V)
40" Diagonal (16:9)
885.17(H) x 497.66(V) mm
(34.85(H) x 19.59(V) inches)
a-si TFT active matrix
0.648(H) x 0.216(V) mm
(0.027(H) x 0.0085(V) inches)
170/170(H/V)
1366(H) x 768(V)
46" Diagonal (16:9)
1018.35(H) x 572.54(V) mm
(40.09(H) x 22.54(V) inches)
a-si TFT active matrix
0.2485(H) x 0.7455(V) mm
(0.0098(H) x 0.029(V) inches)
170/170 (H/V)
1366 (H) x 768 (V)
Frequency
Horizontal
Vertical
Display Colour
30 ~ 61 kHz
60 ~ 75 Hz
16,777,216 colours
30 ~ 61 kHz
60 ~ 75 Hz
16,777,216 colours
30 ~ 61 kHz
60 ~ 75 Hz
16,777,216 colours
30 ~ 61 kHz
60 ~ 75 Hz
16,777,216 colours
PC Resolution
Maximum
Optimum
1360 x 768 @ 60 Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60Hz
1360 x 768 @ 60 Hz
1360 x 768 @ 60Hz
1360 x 768 @ 60 Hz
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
Sound System
PAL,SECAM-B/G, D/K,
I, I/I, L/L’, NTPB (AV3.58, 4.43)
BG, DK, I, L
PAL, SECAM-B/G, D/K,
I, I/I, L/L’, NTPB (AV3.58, 4.43)
BG, DK, I, L
PAL, SECAM-B/G, D/K,
I, I/I, L/L’, NTPB (AV3.58, 4.43)
BG, DK, I, L
PAL, SECAM-B/G, D/K,
I, I/I, L/L’, NTPB (AV3.58, 4.43)
BG, DK, I, L
Video
Colour System
Video System
PAL/NTSC/SECAM
CVBS, S-VHS, RGB
PAL/NTSC/SECAM
CVBS, S-VHS, RGB
PAL/NTSC/SECAM
CVBS, S-VHS, RGB
PAL/NTSC/SECAM
CVBS, S-VHS, RGB
SCART 1
Video Input/Output
RGB Input
Audio Input/Output
1.0 Vp-p @ 75 ohm
0.7 Vp-p @ 75 ohm
500mVrms
1.0 Vp-p @ 75 ohm
0.7 Vp-p @ 75 ohm
500mVrms
1.0 Vp-p @ 75 ohm
0.7 Vp-p @ 75 ohm
500mVrms
1.0 Vp-p @ 75 ohm
0.7 Vp-p @ 75 ohm
500mVrms
SCART 2
Video Input/Output
Audio Input/Output
1.0 Vp-p @ 75 ohm
500mVrms
1.0 Vp-p @ 75 ohm
500mVrms
1.0 Vp-p @ 75 ohm
500mVrms
1.0 Vp-p @ 75 ohm
500mVrms
AC 220 ~ 240 V, 60/50 Hz ±3Hz
AC 220 ~ 240 V, 60/50 Hz ±3Hz
AC 220 ~ 240 V, 60/50 Hz ±3Hz
AC 220 ~ 240 V, 60/50 Hz ±3Hz
140 W
<1.5 W
170 W
<1.5 W
275 W
<1.5 W
275 W
<1.5 W
678 x 111 x 476 mm
( 26.69 x 4.37 x 18.74 inches)
678 x 226 x 532 mm
( 26.69 x 8.90 x 20.94 inches)
804 x 113 x 564 mm
(31.65 x 4.45 x 22.20 inches)
804 x 250 x 622.5 mm
(31.65 x 9.84 x 24.50 inches)
1004 x 115 x 680 mm
(39.52 x 4.52 x 26.77 inches)
1004 x 330 x 749 mm
(39.52 x 12.99 x 29.49 inches)
1126 x 140 x 752 mm
(44.33 x 5.51 x 29.60 inches)
1126 x 360 x 820 mm
(44.33 x 14.17 x 32.28 inches)
Panel
Size
Display Size
Type
Pixel Pitch
Input Signal
Sync.
Video Signal
TV
Colour System
Power Supply
Input
Power Consumption
Normal
Power Saving
Dimension (W x D x H)
Body
With stand
English-64
BN68-00926E-00Eng.qxd
6/8/05 2:30 PM
Page 65
Technical and Environmental Specifications
Model
LE26M5
LE32M5
LE40M5
LE46M5
13.3 kg (29.32 lbs)
19.2 kg (42.33 lbs)
27.5 kg (60.63 lbs)
37 kg (81.57 lbs)
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
RCA Jack (L, R), 0.5 Vrms (-9dB)
3.5Ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output
(3.5Ø Stereo Jack, 32Ω)
RF: 80Hz ~ 15kHz (at -3dB)
A/V: 80Hz ~ 20kHz (at -3dB)
RCA Jack (L, R), 0.5Vrms (-9dB)
3.5Ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output
(3.5Ø Stereo Jack, 32Ω)
RF: 80Hz ~ 15kHz (at -3dB)
A/V: 80Hz ~ 20kHz (at -3dB)
RCA Jack (L, R), 0.5Vrms (-9dB)
3.5Ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output
(3.5Ø Stereo Jack, 32Ω)
RF: 80Hz ~ 15kHz (at -3dB)
A/V: 80Hz ~ 20kHz (at -3dB)
RCA Jack (L, R), 0.5Vrms (-9dB)
3.5Ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output
(3.5Ø Stereo Jack, 32Ω)
RF: 80Hz ~ 15kHz (at -3dB)
A/V: 80Hz ~ 20kHz (at -3dB)
5WX2
SRS TruSurroundXT
Nicam/A7
10 W X 2
SRS TruSurroundXT
Nicam/A3
10 W X 2
SRS TruSurroundXT
Nicam/A2
10 W X 2
Virtual dolby
Nicam/A2
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Audio Characteristics
Audio Input
Audio Input (PC)
Headphone Output
Frequency
Response
Sound
Output
3D Surround
Stereo
Display Mode (PC)
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Mode
Resolution
Horizontal
Vertical
Pixel Clock
Sync Polarity
Frequency (kHz) Frequency (Hz) Frequency (MHz)
(H/V)
IBM
640 x 480
720 x 400
31.469
31.469
59.940
70.087
25.175
28.322
-/-/+
VESA
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1360 x 768
37.861
37.500
37.879
48.077
46.875
48.364
56.476
60.023
47.712
72.809
75.000
60.317
72.188
75.000
60.000
70.069
75.029
60.015
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
85.800
-/-/+ /+
+ /+
+ /+
-/-/+ /+
+ /+
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
DVI dose not support PC function.
English-65
BN68-00926E-00Eng.qxd
6/8/05 2:30 PM
Page 66
Pin Configurations
SCART Connector
Pin
Signal
Pin
Signal
1
2
3
4
5
6
7
8
9
10
11
Audio output R
Audio input R
Audio output L
Audio chassis return
Video chassis return (RGB blue)
Audio input L
RGB blue input
Switching voltage
Video chassis return (RGB green)
AV-Link (Ext 1)
RGB green input
12
13
14
15
16
17
18
19
20
21
Video chassis return (RGB red)
RGB red input
Blanking signal (RGB switching)
Video chassis return
Blanking signal ground
Video output
Video input
Screening/chassis return
Signal
Pin
Signal
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC)
Red (R) Grounding
Green (G) Grounding
Blue (B) Grounding
9
10
11
12
13
14
15
Reserved
Sync Grounding
Grounding
Data (DDC)
Horizontal sync.
Vertical sync.
Clock (DDC)
PC Input Connector (15Pin)
Pin
1
2
3
4
5
6
7
8
English-66
BN68-00926E-00Eng.qxd
6/8/05 2:30 PM
Memo
Page 67
BN68-00926E-00Eng.qxd
6/8/05 2:30 PM
Page 68
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
Download PDF

advertising