Samsung | LE23R41B | Samsung LE23R41B Benutzerhandbuch

BN68-00882E-02Cover.qxd
2/4/06 5:06 AM
Page 1
LCD TV
LCD TV
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Kapcsolatfelvétel: SAMSUNG WORLD-WIDE
Bármilyen észrevétele, vagy kérdése van Samsung termékekkel kapcsolatban,
forduljon a SAMSUNG ügyfélszolgálathoz.
Kontakt do SAMSUNG WORLD-WIDE
Je˝eli masz jakieÊ uwagi lub pytania w sprawie produktów marki Samsung,
skontaktuj si´ z naszà infolinià.
∂ÈÎÔÈÓˆÓ‹ÛÙ Ì ÙË SAMSUNG ™∂ √§√ ∆√¡ ∫√™ª√
∂¿Ó ¤¯ÂÙ ۯfiÏÈ· ‹ ÂÚˆÙ‹ÛÂȘ Û¯ÂÙÈο Ì ÚÔ˚fiÓÙ· Ù˘ Samsung,
ÂÈÎÔÈÓˆÓ‹ÛÙ Ì ÙÔ Î¤ÓÙÚÔ Â͢ËÚ¤ÙËÛ˘ ÂÏ·ÙÒÓ Ù˘ SAMSUNG.
ë‚˙ÊÂÚ Ò Ò˙Ò SAMSUNG èé ñÖãàü ëÇüí
ÄÍÓ ËχÚ ‚˙ÔÓÒË ËÎË ÍÓÏÂÌÚ‡Ë Á‡ ÔÓ‰ÛÍÚËÚ ̇ Samsung,
Ò ӷ˙ÌÂÚ Í˙Ï ˆÂÌÚ˙‡ Á‡ Ó·ÒÎÛÊ‚‡Ì ̇ ÍÎËÂÌÚË Ì‡ SAMSUNG.
Kontaktirajte SAMSUNG ·IROM SVIJETA
Ako imate pitanja ili komentara u vezi s proizvodima tvrtke Samsung,
obratite se centru za brigu o kupcima tvrtke Samsung.
Kontaktujte Samsung po celém svûtû
Pokud máte dotazy nebo pfiipomínky t˘kající se v˘robkÛ Samsung,
kontaktujte stfiedisko péãe o zákazníky spoleãnosti SAMSUNG.
Customer Care Center ☎
02 201 2418
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (€ 0,15/min)
01805 - 121213 (€ 0,12/Min)
06 40 985 985
199 153 153
02 261 03 710
0900 20 200 88 (€ 0,10/Min)
231 627 22
0 801 801 881
80 8 200 128
8-800-200-0400
0850 123 989
902 10 11 30
08 585 367 87
0870 242 0303
8-800-502-0000
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
Web Site
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.ru
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/ur
BN68-00882E-02
LE23R51B / LE23R41B
Country
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
RUSSIA
SLOVAKIA
SPAIN
SWEDEN
U.K
UKRAINE
LE23R51B
LE23R41B
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
This device is a Class B digital apparatus.
Register your product at
www.samsung.com/global/register
Cover-Wee.qxd
2/4/06 9:29 PM
Page 1
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle
it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
23 BN68-00882E-01Eng.qxd
10/7/05 5:05 PM
Page 2
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
• Digital Ready TV: When you
select the regular screen (4:3)
mode to watch an SD-grade
digital broadcast (and the set-top
box output is 480p).
• Digital Ready TV: When you
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Note : If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
select the wide screen (16:9)
mode to watch an SD-grade
digital broadcast (and the set-top
box output is 1080i).
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
• Digital Ready TV: When the
TV receives HD-grade signals
(and the set-top box output is 1080i).
When you watch a digital HD-grade
broadcast on a regular (4:3) TV with the
screen size "16:9" or "Panorama" selected,
you will be able to watch the program but the
top and bottom edges of the screen will be
cropped.
Note : If the borders at the top, bottom and
the center of the screen remain fixed
for an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
23 BN68-00882E-01Eng.qxd
10/7/05 5:05 PM
• Integrated Digital TV
(Wide-screen): When the TV
receives SD-grade (regular)
broadcasting signals (receives
480p regular signals).
• Digital Ready TV (wide-screen):
digital TV: When the TV receives
SD-grade (regular) broadcasting
signals (with a set-top box).
• When you watch an analog
(regular) broadcast on a
wide-screen TV (with the 4:3 screen
mode selected).
Page 3
Although digital broadcasting must be in the
wide screen (16:9) HD format, broadcasters
sometimes show programs made originally
in the regular screen format (4:3) by
converting the signals into digital form, in
which case the left and right side edges of
the screen are cropped.
Note : If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
• When you watch a DVD, CD or a
video in wide-screen (21:9) format
on a wide-screen (16:9) TV.
• When you connect a computer or a
game console to the TV and select
the 4:3 screen mode.
If you connect a DVD player, computer or a
game console to the wide-screen TV and
watch a movie or play a game in regular
(4:3) or wide (21:9) screen mode, the left
and right side edges, or the top and bottom
edges of the screen will be cropped.
Note : If the borders at the left, right and the
center of the screen remain fixed for
an extended period of time, the
amount of light transmission will also
remain varied and as a result the
borders may leave traces.
Do not leave the screen in pause mode for
extended periods of time as you may
experience temporary or permanent image
burn.
23 BN68-00882E-01Eng.qxd
10/7/05 5:05 PM
Page 2
Contents
CONNECTING AND PREPARING YOUR TV
Viewing the Control Panel .........................................................................................
Viewing the Connection Panel...................................................................................
- Connecting an Aerial or Cable Television Network ...............................................
- Connecting Component Devices (DTV/DVD) .......................................................
- Connecting External A/V Devices ..........................................................................
- SERVICE ................................................................................................................
- Connecting Set-Top Box, VCR or DVD .................................................................
- Connecting Computer ............................................................................................
- Connecting AUDIO .................................................................................................
- Kensington Lock .....................................................................................................
Viewing the Remote Control (All Functions Except Teletext) ...................................
Viewing the Remote Control (Teletext Functions).....................................................
Installing Batteries in the Remote Control.................................................................
Switching On and Off .................................................................................................
Placing Your Television in Standby Mode .................................................................
Becoming Familiar with the Remote Control ............................................................
Plug and Play .............................................................................................................
Choosing Your Language ..........................................................................................
4
5
6
6
6
6
6
7
7
7
8
9
10
11
11
12
13
14
SETTING THE CHANNELS
Storing Channels Automatically.................................................................................
Storing Channels Manually........................................................................................
Editing the Channels..................................................................................................
Sorting the Stored Channels .....................................................................................
Assigning Channels Names ......................................................................................
Fine Tuning Channel Reception ................................................................................
15
16
18
19
20
21
SETTING THE PICTURE
Changing the Picture Standard .................................................................................
Adjusting the Custom Picture ....................................................................................
Changing the Colour Tone .........................................................................................
Resetting the Picture Settings to the Factory Defaults.............................................
Changing the Picture Size .........................................................................................
Using the Digital NR (Digital Noise Reduction) Feature...........................................
DNIe (Digital Natural Image engine) .........................................................................
My Colour Control ......................................................................................................
Dynamic Contrast.......................................................................................................
Brightness Sensor......................................................................................................
Viewing the Picture In Picture (PIP) ..........................................................................
22
23
24
24
25
26
27
28
29
30
31
SETTING THE SOUND
Adjusting the Volume .................................................................................................
Switching the Sound Off Temporarily ........................................................................
Selecting the Sound Mode ........................................................................................
Changing the Sound Standard ..................................................................................
Adjusting the Sound Settings ....................................................................................
English-2
33
34
34
35
35
23 BN68-00882E-01Eng.qxd
10/7/05 5:05 PM
Page 3
Contents
SETTING THE SOUND
Setting the TruSurround XT (SRS TSXT) ..........................................................
Adjusting the Volume Automatically....................................................................
Connecting Headphones ....................................................................................
Selecting the Internal Mute ................................................................................
Listening to the Sound of the Sub Picture..........................................................
36
37
38
38
39
SETTING THE TIME
Setting and Displaying the Current Time............................................................
Setting the Sleep Timer ......................................................................................
Switching the Television On and Off Automatically ............................................
Activating the Child Lock ....................................................................................
40
41
42
43
SETTING THE OTHERS
Setting the Blue Screen Mode ............................................................................
Selecting the Melody ..........................................................................................
Selecting a Device from External Sources ........................................................
Viewing Pictures from External Sources ............................................................
44
44
45
46
SETTING THE PC
Setting up Your PC Software (Based on Windows XP) ....................................
Adjusting the PC Screen Automatically ..............................................................
Coarse and Fine Tuning of the Image................................................................
Changing the Image Position..............................................................................
Initializing the Image Settings ............................................................................
47
48
49
50
51
USING THE TELETEXT FEATURE
Teletext Decoder..................................................................................................
Displaying the Teletext Information ....................................................................
Selecting a Specific Teletext Page......................................................................
Using Fastext to Select a Teletext Page ............................................................
Storing Teletext Pages ........................................................................................
52
52
53
54
54
RECOMMENDATIONS FOR USE
Troubleshooting: Before Contacting Service Personnel ....................................
Installing the Wall Mount Kit................................................................................
Installing the Stand ..............................................................................................
Using the Anti-Theft Kensington Lock ................................................................
Technical and Environmental Specifications ....................................................
Display Mode (PC) ..............................................................................................
Pin Configurations ..............................................................................................
55
56
58
59
60
61
62
Symbols
Press
Important
Note
English-3
23 BN68-00882E-01Eng.qxd
10/7/05 5:05 PM
Page 4
Viewing the Control Panel
< LE23R51B >
< LE23R41B >
SOURCE
Displays a menu of all of the available input sources
(TV, Ext. 1, Ext. 2, AV, S-Video, Component, PC).
You can also use the SOURCE
button on the TV’s
control panel to make selections.
(Power)
Press to turn the TV on and off.
Power Indicator
Blinks and turns off when the power is on and lights
up in stand-by mode.
MENU
Press to see an on-screen menu of
your TV’s features.
-
+
Press to decrease or increase the volume.
Also used to select items on the
on-screen menu.
Press to change channels.
Also press to highlight various items
on the on-screen menu.
(Without the Remote Control, You can
turn on TV by using the Channel buttons.)
English-4
Light Detecting Sensor
Adjusts brightness of screen automatically by detecting
brightness of surrounding environment. This sensor works
when Brightness Sensor is on.
Remote Control Sensor
Aim the remote control towards this spot on the TV.
Speakers
23 BN68-00882E-01Eng.qxd
10/7/05 5:05 PM
Page 5
Viewing the Connection Panel
Power Input
Whenever you connect an audio or video system to your set, ensure that all elements are
switched off.
English-5
23 BN68-00882E-01Eng.qxd
10/7/05 5:05 PM
Page 6
Viewing the Connection Panel
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting Component Devices (DTV/DVD)
- Connect component video cables to component connector (“PR”, “PB”, “Y”) on the rear of your set and
the other ends to corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the
DTV (or DVD) and connect the DTV (or DVD) to component connector (“PR”, “PB”, “Y”) on your set.
- The Y, Pb and Pr connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and
R-Y or Y, Cb and Cr.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to
corresponding audio out connectors on the DTV or DVD.
Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output ( ) on the rear of your set. While the
headphone is connected, the sound from the built-in speakers will be disabled.
SERVICE
- Connector for engineer.
Connecting Set-Top Box, VCR or DVD
- Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box
to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Input/Output Specification
Input
Connector
Video
Audio (R/L)
Output
S-Video
RGB
Video+Audio (R/L)
SCART 1 (EXT 1)
Only TV Out
SCART 2 (EXT 2)
Monitor Out
(TV/Ext. 1/Ext. 2/AV/S-VHS)
English-6
23 BN68-00882E-01Eng.qxd
10/7/05 5:05 PM
Page 7
Viewing the Connection Panel
Connecting Computer
-
Connect the D- Sub cable to “PC (PC IN)” on the rear of your set and the other end to the Video Card of
your computer.
-
Connect the stereo audio cable to “AUDIO (PC IN)” on the rear of your set and the other end to
“Audio Out” of the sound card on your computer.
Connecting AUDIO
-
Connect RCA audio cables to “R - AUDIO - L” on the rear of your set and the other ends to corresponding
audio in connectors on the Amplifier or DVD Home Theater.
Speaker
SCART2 Out & Audio Out
RF
Scart, AV, S-Video Component, PC
RF
Scart, AV, S-Video Component, PC
Internal Mute Off
Speaker Output
Speaker Output
Speaker Output
Sound Output
Sound Output
Sound Output
Internal Mute On
Mute
Mute
Mute
Sound Output
Sound Output
Sound Output
Video No Signal
Mute
Mute
Mute
Mute
Sound Output
Sound Output
Kensington Lock
-
Refer to “Using the Anti-Theft Kensington Lock” on page 59.
English-7
23 BN68-00882E-01Eng.qxd
10/7/05 5:05 PM
Page 8
Viewing the Remote Control (All Functions Except Teletext)
Television Standby button
(Refer to page 11)
Number buttons for
direct channel access
Selects the TV mode directly
Temporary sound switch-off
(Refer to page 34)
-Volume increase
-Volume decrease
(Refer to page 33)
Automatic Power-off
(Refer to page 41)
Menu display and
change confirmation
(Refer to page 12)
Previous channel
Available source selection
(Refer to page 46)
-Next channel
-Previous channel
(Refer to page 12)
Use to see information on the
current broadcast.
(Refer to page 40)
Exit the OSD
Control the cursor in the menu
(Refer to page 12)
Picture-In-Picture On /Off
(Refer to pages 31~32)
Sound mode selection
(Refer to page 34)
Sound effect selection
(Refer to page 35)
Picture effect selection
(Refer to page 22)
SRS TSXT selection
(Refer to page 36)
The performance of the remote control may be affected by bright light.
English-8
23 BN68-00882E-01Eng.qxd
10/7/05 5:05 PM
Page 9
Viewing the Remote Control (Teletext Functions)
Exit from the teletext display
Teletext hold
P
P
: Teletext next page
: Teletext previous page
Teletext mode selection
(LIST/FLOF)
Teletext sub page
Teletext reveal
Teletext index
Teletext cancel
Teletext store
Teletext display/mix both
teletext information and the
normal broadcast
Teletext size selection
Teletext Function : Refer to pages 52-54 for details
English-9
23 BN68-00882E-01Eng.qxd
10/7/05 5:05 PM
Page 10
Installing Batteries in the Remote Control
1
Slide the cover out completely.
2
Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with
the diagram inside the compartment.
3
Replace the cover.
Remove the batteries and store them in a cool, dry place
if you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
If the remote control doesn’t work!
Check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
English-10
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 11
Switching On and Off
The mains lead is attached to the rear of your set.
1
Plug the mains lead into an appropriate socket.
Result:
The standby indicator lights up on the front panel.
The main voltage is indicated on the rear of your set and the
frequency is 50 or 60Hz.
2
Press the POWER
Result:
3
button on the front of the panel.
The programme that you were watching last is reselected
automatically.
Press the numeric button (0~9) or channel up/down ( / ) button
on the remote control or
button on the right side of the
panel.
When you switch the set on for the very first time, you will be
asked to choose language in which the menus are to be
displayed (see page 14).
4
To switch your set off, press the POWER
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power
consumption. The standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1
Press the POWER
button on the remote control.
The screen is turned off and a red standby indicator
Result:
appears on the front of your set.
2
To switch your set back on, simply press the POWER
buttons (0~9) or channel up/down ( / ) button again.
, numeric
Do not leave your set in standby mode for long periods of time (when you are
away on holiday, for example).
It is best to unplug the set from the mains and aerial.
English-11
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 12
Becoming Familiar with the Remote Control
The remote control is used mainly to:
Change channels and adjust the volume.
Set up your set using the on-screen menu system.
The following table presents the most frequently used buttons and
their functions.
Button
to
Viewing Function
Menu Function
Used to display the
next stored channel.
-
Used to display the
previous stored channel.
-
Used to display the corresponding channels.
For double digit channels, the second digit
must be pushed immediately after the first.
Failure to do this will result in a single digit
channel being displayed.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
Used to switch the sound off temporarily.
To turn the sound back on, press this button
again, or press the
/
button.
MENU
Used to display the
on-screen menu system.
EXIT
Used to return to the
previous menu or
normal viewing.
Used to exit the on-screen menu system.
Used to move among the menu items.
Used to select a menu item or increase
the value of the selected item.
Used to return to the previous menu item or
decrease the value of the selected item.
ENTER
English-12
Used to confirm your
choice.
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 13
Plug and Play
When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.
1
If the set is in standby mode, press the POWER
remote control.
Result:
2
button on the
The message Start Plug & Play. is displayed. It
appears for a little while, and then the Language menu
is automatically displayed.
Select the appropriate language by pressing the
or
button.
The available languages are listed.
You can choose one of 21 languages.
3
Press the ENTER
Result:
4
5
button.
The following areas are available:
Belgium - France - Germany - Italy Netherlands - Spain - Sweden - Switzerland United Kingdom - Eastern Europe- Others
Select your Country by pressing the
Press the ENTER
button.
Result:
6
The message Check antenna input. is displayed with
the OK selected.
Press the ENTER
Result:
button to confirm your choice.
button.
The Auto Store menu is displayed with the
Start selected.
Press the ENTER
Result:
or
button.
The channel search will start and end automatically.
7
Press the ENTER
button.
Select the hour or minute by pressing the
or
button.
Set the hour or minute by pressing the
or
button.
(Refer to “Setting and Displaying the Current Time” on page 40)
8
Press the ENTER
Result:
button to confirm your setting.
The message Enjoy your watching. is displayed, and
then the channel which has been stored will be activated.
English-13
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 14
Plug and Play
If you want to reset this feature...
1
Press the MENU
Result:
2
button.
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
The options available in the Setup group are displayed.
3
The Plug & Play is selected.
4
Press the ENTER
Result:
5
button.
The message Start Plug & Play. is displayed.
For further details on how to set, refer to the previous page.
Choosing Your Language
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.
1
Press the MENU
Result:
2
The main menu is displayed.
Press the
Result:
button.
or
button to select Setup.
The options available in the Setup group are displayed.
3
Press the ENTER
4
Press the
or
button to select Language.
Press the ENTER
button.
Result:
5
button.
The available languages are listed.
Select a particular language by pressing the
repeatedly.
Press the ENTER
button.
or
button
You can choose one of 21 languages.
6
English-14
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 15
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers. However,
you can sort numbers manually and clear any channels you do not wish
to watch.
1
Press the MENU
Result:
2
Press the
Result:
3
4
The main menu is displayed.
or
button to select Channel.
The options available in the Channel group are displayed.
Press the ENTER
Result:
button.
button.
The Country is selected.
Press the ENTER
button again. Select your Country
by pressing the
or
button repeatedly.
Result:
The following countries are available:
Belgium - France - Germany - Italy Netherlands - Spain - Sweden - Switzerland United Kingdom - Eastern Europe- Others
5
Press the ENTER
6
Press the
or
button to select Auto Store.
Press the ENTER
button.
Result:
7
button.
The Auto Store menu is displayed with the Start selected.
Press the ENTER
button to search the channels. The sub menu
is changed from Start to Stop with channel search started.
Result:
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in the
frequency range (with lowest first and highest last).
The programme originally selected is then displayed.
To return to the previous menu, press the MENU
button.
To stop the search before it has finished, press the
ENTER
button with Stop selected.
8
When the channels have been stored, you can:
Sort them in the order required (refer to page 19)
Assign names to the stored channels (refer to page 20)
Add or delete the channels (refer to page 18)
Fine tune channel reception if necessary (refer to page 21)
English-15
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 16
Storing Channels Manually
You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you
wish to identify.
1
Press the MENU
Result:
2
The main menu is displayed.
Press the
Result:
button.
or
button to select Channel.
The options available in the Channel group are
displayed.
3
Press the ENTER
4
Press the
or
button to select Manual Store.
Press the ENTER
button.
Result:
5
button.
The options available in the Manual Store menu are
displayed with Programme selected.
Press the ENTER
button again.
To assign a programme number to a channel, find the correct
number by pressing the
or
button and then press the
ENTER
button.
You can also set a programme number by pressing number
buttons on the remote control.
6
Press the
or
button to select Colour System and then press
the ENTER
button.
Select the colour standard required by pressing the
or
button
repeatedly and then press the ENTER
button.
Result:
7
Press the
or
button to select Sound System and then press
the ENTER
button.
Select the sound standard required by pressing the
or
button
repeatedly and then press the ENTER
button.
Result:
8
English-16
The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NTSC 4.43
The sound standards are displayed in the following order:
BG - DK - I - L
For all the channels to move to the required channel numbers,
repeat steps 5 to 7 after selecting Programme by pressing
or
button.
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 17
Storing Channels Manually
9
If you know the number of the channel to be stored,
Press the
ENTER
or
button to select Channel and then press the
button.
Select C (Air channel) or S (Cable channel) by pressing the
or
button.
Press the
button to select channel.
Select the required number by pressing the
then press the ENTER
button.
or
button and
If there is an abnormal sound or no sound, re-select the sound
system required.
You can also set a channel by pressing number buttons on the
remote control.
10
If you do not know the channel numbers, press the
or
button
to select Search and then press the ENTER
button.
Search by pressing the
or
button and then press the
ENTER
button.
Result:
11
Press the
or
button to select Store.
Select OK by pressing the ENTER
button.
Result:
12
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
The channel and associated programme number are
stored.
Repeat steps 9 to 11 for each channel to be stored.
Channel mode
P (Programme mode): When tuning is completed, the
broadcasting stations in your area will have been assigned
to position numbers from P00 to P99. You can select a
channel by entering the position number in this mode.
C (Air channel mode): You can select a channel by
entering the assigned number to each broadcast station in
this mode.
S (Cable channel mode): You can select a channel by
entering the assigned number to each cable channel in this
mode.
English-17
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 18
Editing the Channels
You can exclude the channels you chose from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1
Press the MENU
Result:
2
The state of the current channel is displayed.
Press the
/
add or delete.
Result:
English-18
The options available in the Channel group are
displayed.
Press the
or
button to select Add/Delete.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Channel.
Press the ENTER
button.
Result:
3
button.
button to select the channel that you wish to
If the channel that you wish to edit is not in memory, the
Add is selected and displayed.
Otherwise, if the channel that you wish to edit is in
memory, the Delete is selected and displayed.
5
Press the ENTER
6
Repeat steps 4 and 5 for each channel to be added or deleted.
7
Press the MENU
button to return to the previous menu or press
the EXIT button to return to normal viewing.
button to add or delete channel.
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 19
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Give easily remembered numbers to the channels that you
watch most often.
1
Press the MENU
Result:
2
The Prog., Ch. and Name are displayed.
Select the channel number that you wish to change by pressing the
or
button repeatedly.
Press the ENTER
button.
Result:
5
The options available in the Channel group are
displayed.
Press the
or
button to select Sort.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Channel.
Press the ENTER
button.
Result:
3
button.
The selected the channel number and name are moved
to right side.
Press the
or
button to move to the position in which you would
like to change and then press the ENTER
button.
Result:
The selected channel is exchanged with the one
previously stored to the chosen number.
6
Repeat steps 4 to 5 for another channel to be sorted.
7
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
English-19
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 20
Assigning Channels Names
Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.
1
Press the MENU
Result:
2
The current Prog., Ch. and Name are displayed.
If necessary, select the channel to be assigned to a new name by
pressing the
or
button.
Press the ENTER
button.
Result:
5
The options available in the Channel group are
displayed.
Press the
or
button to select Name.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Channel.
Press the ENTER
button.
Result:
3
button.
The selection bar is displayed around the name box.
To...
Then...
Select a letter, number or symbol
Press the
or
Move on the next letter
Press the
button
Move back the previous letter
Press the
button
Confirm the name
Press the ENTER
button
button
The characters available are :
Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters ( _, space)
English-20
6
Repeat steps 4 to 5 for each channel to be assigned to a new name.
7
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 21
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If, however, the signal is weak or distorted, you may have to fine-tune
the channel manually.
Select the channel that you want to fine tune.
1
Press the MENU
Result:
2
The options available in the Channel group are
displayed.
Press the
or
button to select Fine Tune.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Channel.
Press the ENTER
button.
Result:
3
button.
The horizontal bar is displayed.
Press the
or
button to reach the required setting.
Press the ENTER
button.
Result:
An asterisk “*” appears on the right-hand side of the
channel number. The channel number turns red.
To reset the fine-tuning, select Reset by pressing the
button and then press the ENTER
button.
5
or
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
Fine tuned channels that have been saved are marked with an
asterisk “*” on the right-hand side of the channel number in the
channel banner. And the channel number turns red.
English-21
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 22
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
button.
4
Press the ENTER
button again.
Result:
5
Press the ENTER
Result:
6
button.
The Mode is selected.
Select the required picture effect by pressing the
repeatedly.
Result:
7
The options available in the Mode group are displayed.
or
The following picture effects are available:
Dynamic - Standard - Movie - Custom
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
You can also display by simply pressing the P.MODE
(Picture Mode) button.
English-22
button
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 23
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
button.
4
Press the ENTER
button again.
Result:
5
The options available in the Mode group are displayed.
Select the option (Contrast, Brightness, Sharpness, Colour,
Tint) to be adjusted by pressing the
or
button.
Press the ENTER
button.
Result:
The horizontal bar is displayed.
6
Press the
or
button to reach the required setting.
Press the ENTER
button.
7
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
Each adjusted setting will be stored separately according to its
input mode.
The Tint is "inactivated" as following cases.
• Analog mode (RF, Scart, Video, S-Video)
In case of an input signal setting to PAL-50, PAL-CN,
and SECAM.
• Component and DVI mode
In case of an input signal setting to 60HZ; 480i, 480p,
720p @60Hz, 1080i @60Hz.
English-23
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 24
Changing the Colour Tone
You can select the most comfortable colour tone to your eye.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
button.
4
Press the ENTER
button again.
Result:
5
Press the
or
button to select Colour Tone and press the
ENTER
button. Select the required option by pressing the
or
button repeatedly.
Press the ENTER
button.
Result:
6
The options available in the Mode group are displayed.
The following options are available:
Cool2 - Cool1 - Normal - Warm1 - Warm2
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1
Press the MENU
Result:
2
Press the
Result:
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
button.
4
Press the ENTER
button again.
Result:
English-24
button.
The options available in the Mode group are displayed.
5
Press the
ENTER
6
Press the EXIT button to return to normal viewing.
or
buttons to select Reset, then press the
button.
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 25
Changing the Picture Size
You can select the picture size which best corresponds to your viewing
requirements.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
button.
5
Select the required option by pressing the
repeatedly.
Press the ENTER
button.
Result:
or
button.
button to select Size and press the ENTER
or
button
The following options are available:
Auto Wide - Wide - Panorama - Zoom - 4:3
Zoom : Magnifies the 16:9 wide picture (in the
vertical direction) to fit the screen size.
Select
by pressing the
or
button. Use the
or
button to
move the picture up and down. After
selecting
, use the
or
button to
magnify or reduce the picture size in
the vertical direction.
6
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
In PC Mode, only Wide and 4:3 mode can be adjusted.
English-25
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 26
Using the Digital NR (Digital Noise Reduction) Feature
If the signal received by your television is weak, you can activate
this feature to help reduce any static and ghosting that may appear
on the screen.
1
Press the MENU
Result:
2
Press the
Result:
English-26
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
or
button to select Digital NR.
Press the ENTER
button.
5
Press the
or
button to select On.
Press the ENTER
button.
6
Press the EXIT button to return to normal viewing.
button.
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 27
DNIe (Digital Natural Image engine)
Samsung’s new technology brings you more detailed images with
contrast and white enhancement. A new image compensation algorithm
gives viewers brighter and clearer images.
DNIe technology will match every signal to your eyes.
You can see how DNIe improves the picture by setting DNIe Demo mode
to On.
1
Press the MENU
Result:
2
The main menu is displayed.
Press the
Result:
button.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
or
button to select DNIe Demo and then press the
ENTER
button.
Press the
or
button to select On.
Press the ENTER
button.
button.
DNIe Demo: Off
DNIe Demo mode is deactivated.
DNIe Demo: On
The right-hand side of the screen shows improved DNle
image. The left-hand side of the screen shows the
original image.
5
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
This function doesn’t work when source is in PC mode.
The DNle Demo is designed to show the difference between
the regular and DNIe pictures.
By default, the product displays the picture with DNle applied.
English-27
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 28
My Colour Control
My Colour Control is to adust the most preferred colours such as Blue,
Green, Pink without interfering with other colours in order for each
consumer to enjoy the screen colour of its choice.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
or
button to select My Colour Control and then
press the ENTER
button.
Result:
5
Press the
ENTER
the
or
Result:
6
Press the
ENTER
the
or
Result:
button.
The options available in the My Colour Control menu
are displayed.
or
button to select Easy Control and press the
button. Select a source of the sub picture by pressing
button and press the ENTER
button.
The sources are displayed in the following order:
Blue - Green - Pink - Standard - Custom
or
button to select Detail Control and press the
button. Select a source of the sub picture by pressing
button and press the ENTER
button.
The sources are displayed in the following order:
Pink - Green - Blue- Reset
7
Press the
or
button to reach the required setting.
Press the ENTER
button.
8
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
This function captures the current screen in a still image to adjust
the colour.
This function doesn't work when source is in PC mode.
To return to the factory default settings for My Colour Control
colours, select Reset by pressing the
or
button and then
press the ENTER
button.
English-28
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 29
Dynamic Contrast
Dynamic Contrast is to automatically detect distribution of inputted
visual signal and adjust to create optimum contrast.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
or
button to select Dynamic Contrast.
Press the ENTER
button.
Result:
button.
The Dynamic Contrast menu is displayed.
5
Select On by pressing the
or
Press the ENTER
button.
6
When it has finished, press the EXIT button to return to normal
viewing.
button.
This function doesn't work when source is in PC mode or
PIP is set to on.
English-29
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 30
Brightness Sensor
Brightness Sensor is to adjust brightness of screen
either automatically or manually by detecting brightness of
surrounding environment using light detecting sensor.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Picture.
The options available in the Picture group are
displayed.
3
Press the ENTER
4
Press the
or
button to select Brightness Sensor.
Press the ENTER
button.
Result:
5
The Brightness Sensor menu is displayed.
Select On by pressing the
or
Press the ENTER
button.
Result:
6
button.
button.
Brightness on the screen is adjusted automatically
according to brightness of surrounding environment.
When it has finished, press the ENTER
button to return to the
previous menu or press the EXIT button to return to normal
viewing.
This function doesn't work when source is in PC mode.
English-30
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 31
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set programme
or video input. In this way, you can watch the picture of set programme
or video input from any connected equipment while watching the main
picture.
[PC mode only]
PIP is available only in PC mode and will be unavailable for other
modes.
1
Press the MENU
Result:
2
Press the
Result:
The main menu is displayed.
or
Press the ENTER
4
Press the
ENTER
5
button to select Picture.
The options available in the Picture group are
displayed.
3
Result:
button.
button.
or
button to select PIP and then press the
button.
The options available in the PIP menu are displayed.
Press the ENTER
button again.
Select On by pressing the
or
button and then press the
ENTER
button.
You can also select PIP options by simply
pressing the PIP button.
6
Press the
ENTER
the
or
Result:
or
button to select Source and press the
button. Select a source of the sub picture by pressing
button and press the ENTER
button.
The sources are displayed in the following order:
When no external device is connected to your set, only
TV, Ext.1, Ext.2 are activated in the Source. AV,
S-Video, Component are activated only when they are
connected to your set.
You cannot use the Swap and Size functions in PIP.
English-31
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 32
Viewing the Picture In Picture (PIP)
7
Press the
or
button to select Position and then press the
ENTER
button.
Select the position of the sub picture by pressing the
or
button
and then press the ENTER
button.
Result:
8
[Sub: TV]
You can move the sub picture.
Press the
or
button to select Programme and then press the
ENTER
button. You can select the channel that you want to view
through sub picture by pressing the
or
button.
Press the ENTER
button.
Result:
The memorized Programme is displayed.
Main: PC, Sub: TV
“Programme ” is active and available when Source of
Sub picture is in TV mode.
9
To return to normal viewing, press the EXIT button.
PIP Settings
Sub
PIP operates
PIP doesn’t operate
S-Video Component
TV
Ext.1
Ext.2
AV
TV
X
X
X
X
X
X
X
Ext.1
X
X
X
X
X
X
X
Ext.2
X
X
X
X
X
X
X
AV
X
X
X
X
X
X
X
S-Video
X
X
X
X
X
X
X
Component
X
X
X
X
X
X
X
PC
O
O
O
O
O
O
X
Main
English-32
O:
X:
PC
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 33
Adjusting the Volume
You can adjust the volume using your remote control.
Press the
Result:
Press the
Result:
button to increase the volume.
A horizontal bar is displayed and the volume increases
until you release the button. The cursor moves to the right
to indicate the volume.
button to decrease the volume.
A horizontal bar is displayed and the volume decreases
until you release the button. The cursor moves to the left
to indicate the volume.
Additional sound adjustments are available on your set.
For further details, refer to pages 34 to 39.
English-33
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 34
Switching the Sound Off Temporarily
You can switch the sound off temporarily.
Example: You wish to answer the telephone.
1
Press the MUTE
Result:
2
button.
The sound is switched off and “Mute” is displayed.
When you wish to turn the sound back on, press the MUTE
button again or either of the volume buttons.
Result:
The sound comes back on as the same volume as
before and the “Mute” indication disappears.
Selecting the Sound Mode
You can set the sound mode by pressing the "DUAL" button.
When you press it, the current sound mode is displayed on the screen.
FM
Stereo
Audio Type
DUAL 1/2
Mono
MONO
Stereo
STEREO
MONO
Automatic
change
Dual
DUAL 1
DUAL 2
DUAL 1
Mono
Stereo
NICAM
Stereo
Default
Dual
MONO
MONO
STEREO
MONO
DUAL 1
Automatic
change
DUAL 1
DUAL 2
If the receiving conditions deteriorate, listening will be easier
if the mode is set to Mono.
If the stereo signal is weak and automatic switching occurs,
switch to Mono.
English-34
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 35
Changing the Sound Standard
You can select the type of the special sound effect to be used when
watching a given broadcast.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
button.
4
Press the ENTER
button again.
Result:
5
Select the required sound effect by pressing the
or
repeatedly and then press the ENTER
button.
Result:
6
The Mode is selected.
button
The following sound effects are available:
Standard - Music - Movie - Speech - Custom
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
You can also select these options by simply pressing the
S.MODE (Sound Mode) button on the remote control.
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
4
Select Equalizer by pressing the
the ENTER
button.
5
Select the required option by pressing the
6
Press the
or
button to reach the required setting.
Press the ENTER
button.
7
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
button.
or
button and then press
or
button.
If you make any changes to these settings, the Sound Mode is
automatically switched to Custom.
English-35
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 36
Setting the TruSurround XT (SRS TSXT)
TruSurround XT is a patented SRS technology that solves the problem
of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling,virtual surround sound experience
through any two-speaker playback system, including internal television
speakers. It is fully compatible with all multichannel formats.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
4
Press the
or
button to select SRS TSXT and then
press the ENTER
button.
5
Select the required option by pressing the
Press the ENTER
button.
Result:
6
button.
or
button.
The sources are displayed in the following order:
Off - 3D Mono - Stereo
Press the EXIT button to return to normal viewing.
You can also set these options simply by pressing the SRS button
on remote control.
TruSurround XT, SRS and
symbol are trademarks of SRS Labs,
Inc. TruSurround XT technology is incorporated under license from
SRS Labs, Inc.
English-36
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 37
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it is not
easy for you to adjust the volume every time the channel is changed.
This feature let you automatically adjust the volume of the desired
channel by lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation signal is low.
1
Press the MENU
Result:
2
button.
The main menu is displayed.
Press the
or
button to select Sound.
Press the ENTER
button.
Result:
The options available in the Sound group are displayed.
3
Press the
or
button to select Auto Volume.
Press the ENTER
button.
4
Press the
or
button to select On.
Press the ENTER
button.
5
Press the EXIT button to return to normal viewing.
English-37
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 38
Connecting Headphones
You can connect a set of headphones to your set if you wish to watch a
TV programme without disturbing the other people in the room.
Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel
of the set.
The sound is heard through the headphones.
Result:
For further details on how to set your headphone preferences,
refer to the section below.
Prolonged use of headphones at a high volume may damage
your hearing.
You will not receive sound from the speakers when you
connect headphones to the system.
Selecting the Internal Mute
If you want to hear the sound through separate speakers,
cancel the internal amplifier.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
4
Press the
or
button to select Internal Mute.
Press the ENTER
button.
5
Press the
or
button to select On.
Press the ENTER
button.
6
Press the EXIT button to return to normal viewing.
button.
When Internal Mute is set to On, the Sound menus except for
Sound Select (in PIP mode) cannot be adjusted.
English-38
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 39
Listening to the Sound of the Sub Picture
During the PIP feature is activating, you can listen to the sound of the
sub picture.
1
Press the MENU
Result:
2
Press the
Result:
button.
The main menu is displayed.
or
button to select Sound.
The options available in the Sound group are displayed.
3
Press the ENTER
4
Press the
or
button to select Sound Select and then press
the ENTER
button.
Result:
button.
Main and Sub are displayed.
You can select this option when the PIP is in “On”.
5
Select the Sub by pressing the
Press the ENTER
button.
Result:
or
button.
You can listen to the sound of the sub picture.
To listen the sound of the current main picture, set to Main.
6
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
English-39
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 40
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is displayed when
you press the INFO button. You must also set the time if you wish to
use the automatic On/Off timers.
If you disconnect the power cord, you have to set the clock
again.
1
Press the MENU
Result:
2
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
The options available in the Setup group are displayed.
Press the
or
button to select Time.
Press the ENTER
button.
Result:
The Time menu is displayed with Clock Set selected.
4
Press the ENTER
5
To...
button.
Press the...
Move to Hour or Minute
or
button
Set the Hour or Minute
or
button
Press the ENTER
button.
6
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
7
To display the...
Press the...
Current time and selected audio/video
setting status
INFO button
8
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
You can also set hour and minute by pressing the number buttons
on the remote control.
English-40
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 41
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after which
the television automatically switches to standby mode.
1
Press the MENU
Result:
2
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
The options available in the Setup group are displayed.
Press the
or
button to select Time.
Press the ENTER
button.
Result:
The Time menu is displayed with Clock Set selected.
4
Press the
or
button to select Sleep Timer.
Press the ENTER
button.
5
Press the
or
button repeatedly and cycle through the preset
time intervals (Off, 30, 60, 90, 120, 150, 180).
Press the ENTER
button.
Result:
The TV automatically switches to standby mode when the
timer reaches 0.
6
To cancel the sleep timer function, select Off by pressing the
or
button and then press the ENTER
button.
7
Press the EXIT button to return to normal viewing.
You can set the sleep timer by simply pressing the SLEEP button on the
remote control.
1
Press the SLEEP button on the remote control.
Result:
2
If the sleep timer is not yet set, Off is displayed.
Otherwise, the remaining time before which the television
switches to standby mode is displayed.
Select the preset time interval for staying on by pressing the SLEEP
button repeatedly.
English-41
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 42
Switching the Television On and Off Automatically
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your
choice at the time you select.
Switch off automatically at the time you select.
The first step is to set the television’s clock
(refer to “Setting and Displaying the Current Time” on page 40 ).
1
Press the MENU
Result:
2
The Time menu is displayed with Clock Set selected.
Press the
or
button to select On Timer.
Press the ENTER
button.
Result:
5
The options available in the Setup group are displayed.
Press the
or
button to select Time.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
The On Timer menu is displayed.
Set the time, channel and volume level at which you wish the set to
be switched on.
To...
Press the...
Move to Hour, Minute, Programme, and Volume
or
button
Set Hour, Minute, Programme, and Volume
or
button
Move to Activation
or
button
Select Yes to enable above setting
or
button
Press the ENTER
button.
6
Press the
or
button to select Off Timer.
In the same way, set the time at which you wish the set to
be switched off automatically.
7
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
You can also set hour and minute by pressing the number
buttons on the remote control.
English-42
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 43
Activating the Child Lock
This feature allows you to prevent unauthorized users, such as children,
from watching unsuitable programmes by muting out video and audio.
Child Lock cannot be released using the buttons on the lower-right
panel. Only the remote control can release the Child Lock setting, so
keep the remote control away from children.
This function does not work in PC mode.
1
Press the MENU
Result:
2
The options available in the Setup group are displayed.
Press the
or
button to select Child Lock.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
The options available in the Child Lock group are
displayed.
Press the ENTER
Result:
button again.
The Child Lock is selected.
5
Press the
or
button to select On.
Press the ENTER
button.
6
Press the
or
button to select Programme.
Press the ENTER
button.
7
Press the
or
button to select the channels to lock.
Press the ENTER
button.
8
Press the
or
button to select Lock.
Press the ENTER
button.
9
Press the
or
button to select Locked to lock the channels.
Press the ENTER
button.
10
Repeat steps 6 and 9 for each channel to be locked or unlocked.
11
Press the EXIT button to return to normal viewing.
English-43
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 44
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
"Blue Screen" mode to "Off".
1
Press the MENU
Result:
2
button.
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
The options available in the Setup group are displayed.
3
Press the
or
button to select Blue Screen.
Press the ENTER
button.
4
Press the
or
button to select On.
Press the ENTER
button.
5
Press the EXIT button to return to normal viewing.
Selecting the Melody
You can hear melody sound when the television is powered on or off.
1
Press the MENU
Result:
2
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
English-44
button.
The options available in the Setup group are displayed.
3
Press the
or
button to select Melody.
Press the ENTER
button.
4
Press the
or
button to select On.
Press the ENTER
button.
5
Press the EXIT button to return to normal viewing.
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 45
Selecting a Device from External Sources
Your set enables you to choose which audio/video signals are output to
the external connector.
1
Press the MENU
Press the ENTER
Result:
button.
button to select Input.
The options available in the Input group are displayed.
2
Press the ENTER
button.
The options available in the Source List menu are
Result:
displayed.
When no external device is connected to your set,
only TV, Ext.1, Ext.2 are activated in the
Source List. AV, S-Video, Component, PC are
activated only when they are connected to your
set.
3
Select the required device by pressing the
Press the ENTER
button.
4
Repeat step 1.
Press the
or
button to select Edit Name.
Press the ENTER
button.
The options available in the Edit Name menu are
Result:
displayed.
5
Select the device that you wish to edit by pressing the
or
button.
The following options are available:
Result:
Ext.1 - Ext.2 - AV - S-Video - Component - PC
6
Press the ENTER
7
Select the required device by pressing the
or
button
repeatedly.
Press the ENTER
button.
The following options are available:
Result:
---- - VCR - DVD - D-VHS - Cable STB - HD STB Satellite STB - AV Receiver - DVD Receiver - Game Camcorder - DVD Combo - DHR - PC
8
When you are satisfied with the setting, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
or
button.
button.
DHR: DVD HDD Recorder
English-45
23 BN68-00882E-01Eng.qxd
10/7/05 5:06 PM
Page 46
Viewing Pictures from External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1
Check that all the necessary connections have been made.
2
Press the SOURCE button.
Result:
3
The edited device and audio status are displayed on topleft of the set.
Press the SOURCE button until the required input source is selected.
If you change the external source while viewing, pictures
might take a short period of time to be switched.
TV mode can be selected by pressing the TV or
/
button on the
remote control but you cannot select it by pressing the SOURCE
button.
English-46
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 47
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. But the actual screens on your
PC will probably be different, depending upon your particular version of Windows and your particular
video card. But even if your actual screen look different, the same, basic set-up information will apply
in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1
First, click on “Control Panel” on the Windows start menu.
2
When the control panel window appears, click on
“Appearance and Themes” and a display
dialog-box will appear.
3
When the control panel window appears, click on
“Display” and a display dialog-box will appear.
4
Navigate to the “Settings” tab on the display dialog-box.
The correct size setting (resolution)
- LE23R51B: 1024 x 768
- LE23R41B: 1280 x 720
If a vertical-frequency option exists on your display
settings dialog box, the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit the dialog box.
*See “Display Modes” on page 61.
1024
768
English-47
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 48
Adjusting the PC Screen Automatically
Auto adjustment allows the PC screen of set to self-adjust to the
incoming PC video signal.
The values of fine, coarse and position are adjusted automatically.
Preset: Press the SOURCE button to select the PC mode.
1
Press the MENU
Result:
2
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
English-48
The options available in the PC menu are displayed.
Press the
or
button to select Auto Adjustment.
Press the ENTER
button.
Result:
5
The options available in the Setup group are displayed.
Press the
or
button to select PC.
Press the ENTER
button.
Result:
4
button.
The main menu is displayed.
The screen quality and position are automatically
adjusted.
When you are satisfied with your choice, press the EXIT button to
return to normal viewing.
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 49
Coarse and Fine Tuning of the Image
The purpose of picture quality adjustment is to remove or reduce
picture noise. If the noise is not removed by Fine-tuning alone, then
adjust the frequency as best as possible (coarse) and Fine-tune again.
After the noise has been reduced, re-adjust the picture so that it is
aligned on the center of screen.
Preset: Press the SOURCE button to select the PC mode.
1
Press the MENU
Result:
2
The options available in the PC menu are displayed.
Press the ENTER
Result:
5
The options available in the Setup group are displayed.
Press the
or
button to select PC.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
button again.
The Image Lock menu is selected.
Press the
or
button to select Coarse or Fine.
Press the ENTER
button.
Result:
The horizontal bar is displayed.
6
Press the
or
button to adjust the screen quality.
Press the ENTER
button.
Vertical stripes may appear or the picture may become blurry.
7
When you are satisfied with the settings, press the MENU
button
to return to the previous menu or press the EXIT button to return to
normal viewing.
English-49
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 50
Changing the Image Position
Preset: Press the SOURCE button to select the PC mode.
1
Press the MENU
Result:
2
The options available in the PC menu are displayed.
Press the
or
button to select Position.
Press the ENTER
button.
Result:
English-50
The options available in the Setup group are displayed.
Press the
or
button to select PC.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
You can adjust the image Position.
5
Press the
or
button to adjust horizontal position.
Press the
or
button to adjust vertical position.
Press the ENTER
button.
6
Press the MENU
button to return to the previous menu or press
the EXIT button to return to normal viewing.
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 51
Initializing the Image Settings
You can replace all image settings with the factory default values.
Preset: Press the SOURCE button to select the PC mode.
1
Press the MENU
Result:
2
The options available in the PC menu are displayed.
Press the
or
button to select Image Reset.
Press the ENTER
button.
Result:
5
The options available in the Setup group are displayed.
Press the
or
button to select PC.
Press the ENTER
button.
Result:
4
The main menu is displayed.
Press the
or
button to select Setup.
Press the ENTER
button.
Result:
3
button.
You can initialize all image setting to the factory default
values.
Press the MENU
button to return to the previous menu or press
the EXIT button to return to normal viewing.
English-51
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 52
Teletext Decoder
Most set channels carry “ teletext ”, pages of written information that
provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The teletext pages are organized according to six categories:
Part
Contents
A
B
C
D
E
F
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
Status information.
Displaying the Teletext Information
You can display teletext information at any time, but signal reception
must be good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the teletext mode and display the contents page:
1
Using the
( ) or
teletext service.
2
Press the TTX/MIX (
Result:
3
4
) button to activate the teletext mode.
/
) button again.
The screen will split into two. This Double Teletext feature
lets you view the actual broadcast and teletext
information separately on the screen.
Press the TTX/MIX (
Result:
/
) button, select the channel providing the
The contents page is displayed. It can be redisplayed at
any time by pressing the MENU ( ) button.
Press the TTX/MIX (
Result:
(
/
) button again.
The actual broadcast will be displayed simultaneously
with the teletext page on the screen.
5
To return to normal viewing, press the PIP (
6
Press the TV(
) button.
) button again to exit from the Text display.
If any broken character appears while Text is being viewed,
make sure that the Text language is identical with the language in the
“Setup” menu mode. If both languages are different, select the same
language with the Text language on the “Setup” menu.
English-52
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 53
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the page
number directly:
1
Enter the three-digit page number listed in the contents by pressing the
corresponding numeric buttons.
Result:
The current page counter is incremented and the page is
then displayed.
2
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display on
a given page, press the PRE-CH ( ).
Press the PRE-CH ( ) button again to resume.
3
Using the various display options:
To display...
Press the...
Both teletext information and
the normal broadcast
TTX/MIX (
Hidden text
(answers to quiz games, for example)
INFO (
)
The normal screen
INFO (
) again
A secondary page,
by entering its 4-digit number
SLEEP (
The next page
(
)
The previous page
(
)
/
)
)
Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
( )
•Once
•Twice
Normal screen
•Three times
English-53
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 54
Using Fastext to Select a Teletext Page
The various topics included in the teletext pages are colour-coded, and
can be selected by pressing the coloured buttons on the remote control.
1
Display the teletext contents page by pressing the
TTX/MIX ( / ) button.
2
Press the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line).
Result:
3
4
The page is displayed with additional colour-coded
information that can be selected in the same way.
To display the:
Press the:
Previous page
Red button.
Next page
Green button.
When you have finished, press the PIP (
normal broadcast.
) button to return to the
Storing Teletext Pages
You can store up to four teletext pages to display them later at leisure.
1
Select the LIST mode using the SOURCE (
Result:
) button.
Four 3-digit numbers are displayed in different colours.
The SOURCE ( ) button is used to switch between
the LIST and FLOF modes.
English-54
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a different
coloured button each time.
5
Press the (
) button until the corresponding blocks blink.
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 55
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of your
set and contact your local dealer.
No sound or picture
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the POWER buttons on the front of the
set.
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no sound
Check the volume.
Check whether the MUTE
control.
button has been pressed on the remote
No picture or black and white picture
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture interference
Try to identify the electrical appliance that is affecting the set and move it
further away.
Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
“Check signal cable.” message is displayed.
Check that the signal cable is firmly connected to the PC or video sources.
Check that the PC or video sources are turned on.
On PC mode, “Not Supported Mode.”
message is displayed.
Check the maximum resolution and the frequency of the video adapter.
Compare these values with the data in the Display Modes.
The image is too light or too dark.
Adjust the Brightness and Contrast.
On PC mode, horizontal bars appear to flicker,
jitter or shimmer on the image.
Adjust the Fine function.
On PC mode, vertical bars appear to flicker,
jitter or shimmer on the image.
Adjust the Coarse function and then adjust the Fine function.
On PC mode, screen is black and power
indicator light blinks every 1 second.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
On PC mode, image is not stable and
may appear to vibrate.
Check that the display resolution and frequency from your computer or
video board is an available mode for your set. On your computer check:
Control Panel, Display, Settings.
If the setting is not correct, use your computer utility programme to change
the display settings.
Your set supports multiscan display functions within the following
frequency domain:
Horizontal frequency(kHz): 30~ 61
Vertical frequency(Hz): 60~75
Maximum refresh rate (at 60Hz): LE23R51B - 1360 x 768
LE23R41B - 1280 x 720
On PC mode, image is not centered
on the screen.
Adjust the horizontal and vertical position.
The TFT LCD panel uses a panel consisting of sub pixels (LE23R51B: 3,147,264 / LE23R41B: 2,764,800) which require
sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have
no impact on the performance of the product.
English-55
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 56
Installing the Wall Mount Kit
This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components (Sold separately)
M4 X L12
Wall-Bracket
Set-Bracket
Screw: 8EA
Anchor: 4EA
Installation Guide
M4 X L20
Wood Screw: 4EA
How to assemble the Wall Mount Bracket
1
Mark the location on the wall where the hole
will be drilled.
Drill a hole of 35mm depth on the marked
location.
Fix anchors on each hole on the wall.
Connect wall-bracket to the wall with wood
screws after fitting anchors into the
wall-bracket .
Note: If the bracket is not firmly fixed to the wall,
LCD TV can fall off.
English-56
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 57
Installing the Wall Mount Kit
How to assemble the Wall Mount Bracket
2
3
Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Remove the four screws from the back of the TV.
Separate the stand from the TV.
Cover the bottom hole with a cap
Attach the set-bracket onto the rear side of the TV set and secure the screws
Insert three Hangers of the set-bracket into the grooves of the wall-bracket
Fix set-bracket and wall-bracket with screws .
.
.
Note: Before installing the set on the wall, connect the cables to the set first.
English-57
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 58
Installing the Stand
<2>
1. Place the TV faced down on a soft cloth or cushion on a table.
2. Attach the stand to the TV set as shown in the picture.
3. Use the four screws to tightly fix the stand.
English-58
<3>
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 59
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
The locking device has to be purchased separately. The appearance and locking method may differ from
the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for
proper use.
Cable
Figure 2
Figure 1
<Optional>
1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction
(Figure 2).
2. Connect the Kensington lock cable.
3. Fix the Kensington lock to a desk or a heavy stationary object.
English-59
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 60
Technical and Environmental Specifications
Model Name
LE23R51B
LE23R41B
Viewing Angle
Resolution
23” Diagonal (16:9)
508.125 (H) x 285.696 (V) mm
(20.00 (H) x 11.25 (V) inches)
a-si TFT active matrix
0.372 (H) x 0.372 (V) mm
(0.015 (H) x 0.015 (V) inches)
170/170 (H/V)
1366 (H) x 768 (V)
23” Diagonal (16:9)
510.72 (H) x 287.28 (V) mm
(20.10 (H) x 11.31 (V) inches)
a-si TFT active matrix
0.1330 (H) x 0.3990 (V) mm
(0.005 (H) x 0.016 (V) inches)
176/176 (H/V)
1280 (H) x 720 (V)
Frequency
Horizontal
Vertical
Display Colour
30 ~ 61 kHz
60 ~ 75 Hz
16,777,216 colours
30 ~ 61 kHz
60 ~ 75 Hz
16,777,216 colours
PC Resolution
Maximum
Optimum
1360 x 768 @ 60 Hz
1024 x 768 @ 60 Hz
1280 x 720 @ 60 Hz
1280 x 720 @ 60 Hz
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
Sound System
PAL, SECAM-B/G, D/K, I, I/I, L/L'
NTPB(AV3.58, 4.43)
BG, DK, I, L
PAL, SECAM-B/G, D/K, I, I/I, L/L'
NTPB(AV3.58, 4.43)
BG, DK, I, L
Video
Colour System
Video System
PAL/NTSC/SECAM
CVBS, S-VHS, RGB
PAL/NTSC/SECAM
CVBS, S-VHS, RGB
SCART 1
Video Input/Output
RGB Input
Audio Input/Output
1.0 Vp-p @ 75 ohm
0.7 Vp-p @ 75 ohm
500mVrms
1.0 Vp-p @ 75 ohm
0.7 Vp-p @ 75 ohm
500mVrms
SCART 2
Video Input/Output
Audio Input/Output
1.0 Vp-p @ 75 ohm
500mVrms
1.0 Vp-p @ 75 ohm
500mVrms
AC 220 ~ 240 V, 60/50 Hz ± 3 Hz
AC 220 ~ 240 V, 60/50 Hz ± 3 Hz
100 W
< 1.5 W
100 W
< 1.5 W
583.0 x 90.0 x 443.0 mm
( 22.95 x 3.54 x 17.44 inches)
583.0 x 206.0 x 484.7 mm
( 22.95 x 8.11 x 19.08 inches)
583.0 x 90.0 x 443.0 mm
( 22.95 x 3.54 x 17.44 inches)
583.0 x 206.0 x 484.7 mm
( 22.95 x 8.11 x 19.08 inches)
Panel
Size
Display Size
Type
Pixel Pitch
Input Signal
Sync.
Video Signal
TV
Colour System
Power Supply
Input
Power Consumption
Normal
Power Saving
Dimension (W x D x H)
Body
With stand
English-60
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 61
Technical and Environmental Specifications
Model Name
LE23R51B
LE23R41B
8.6 kg (18.96 lbs)
8.6 kg (18.96 lbs)
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Audio Characteristics
Audio Input
Audio Input (PC)
Headphone Output
Frequency
Response
RCA Jack (L, R), 0.5 Vrms (-9 dB) RCA Jack (L, R), 0.5 Vrms (-9 dB)
3.5 Ø Stereo Jack, 0.5 Vrms (-9 dB) 3.5 Ø Stereo Jack, 0.5 Vrms (-9 dB)
Max. 10 mW Output
Max. 10 mW Output
(3.5 Ø Stereo Jack, 32 Ω)
(3.5 Ø Stereo Jack, 32 Ω)
RF: 80 Hz ~ 15 kHz (at -3 dB)
RF: 80 Hz ~ 15 kHz (at -3 dB)
A/V: 80 Hz ~ 20 kHz (at -3 dB)
A/V: 80 Hz ~ 20 kHz (at -3 dB)
Sound
Output
3D Surround
Stereo
3WX2
SRS TruSurroundXT
Nicam / A 11
3WX2
SRS TruSurroundXT
Nicam / A 11
Display Mode (PC)
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
Mode
Resolution
Horizontal
Vertical
Pixel Clock
Sync Polarity
Frequency (kHz) Frequency (Hz) Frequency (MHz)
(H/V)
IBM
640 x 480
720 x 400
31.469
31.469
59.940
70.087
25.175
28.322
-/-/+
VESA
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 720
1360 x 768
37.861
37.500
37.879
48.077
46.875
48.364
56.476
60.023
45.000
47.712
72.809
75.000
60.317
72.188
75.000
60.000
70.069
75.029
60.000
60.015
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
74.250
85.800
-/-/+ /+
+ /+
+ /+
-/-/+ /+
+ /+
+ /+
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
DVI dose not support PC function.
1280 x 720 mode supported only in LE23R41B.
1360 x 768 mode supported only in LE23R51B.
English-61
23 BN68-00882E-01Eng.qxd
10/7/05 5:07 PM
Page 62
Pin Configurations
SCART Connector
Pin
Signal
Pin
Signal
1
2
3
4
5
6
7
8
9
10
11
Audio output R
Audio input R
Audio output L
Audio chassis return
Video chassis return (RGB blue)
Audio input L
RGB blue input
Switching voltage
Video chassis return (RGB green)
AV-Link (Ext 1)
RGB green input
12
13
14
15
16
17
18
19
20
21
Video chassis return (RGB red)
RGB red input
Blanking signal (RGB switching)
Video chassis return
Blanking signal ground
Video output
Video input
Screening/chassis return
Signal
Pin
Signal
Red (R)
Green (G)
Blue (B)
Grounding
Grounding (DDC)
Red (R) Grounding
Green (G) Grounding
Blue (B) Grounding
9
10
11
12
13
14
15
Reserved
Sync Grounding
Grounding
Data (DDC)
Horizontal sync.
Vertical sync.
Clock (DDC)
PC Input Connector (15Pin)
Pin
1
2
3
4
5
6
7
8
English-62
Cover-Wee.qxd
2/4/06 9:29 PM
Page 1
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible
harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle
it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe
recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed
with other commercial wastes for disposal.
Download PDF

advertising