Samsung | LE52A900G1F | Samsung Armani TV LE52A900G Benutzerhandbuch

BN68-01625A-NewCover.indd 1
2008-08-19 �� 9:59:20
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model
BN68-01625A-01Eng.indd 1
Serial No.
2008-08-19 �� 9:38:57
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
•Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention
is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when
displaying a still image.
•
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and
center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may
cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01625A-01Eng.indd 2
2008-08-19 �� 9:38:57
English
Contents
Connecting and Preparing Your TV
USING The DTV FeATuRe
 List of Parts...........................................................................2
 Viewing the Control Panel.....................................................3
 Viewing the Connection Panel..............................................4
 Viewing the Remote Control..................................................6
 Mini Remote Control.............................................................7
 Using the Remote Control Backlight Buttons........................7
 Installing Batteries in the Remote Control.............................8
 Switching On and Off............................................................9
 Placing Your Television in Standby Mode.............................9
 Viewing the Menus................................................................9
 Using the TOOLS Button.......................................................9
 Plug & Play..........................................................................10
Setting the Channels
 Storing Channels Automatically..........................................11
 Storing Channels Manually.................................................12
 Adding / Locking Channels.................................................13
 Sorting the Stored Channels...............................................14
 Assigning Channels Names................................................14
 Fine Tuning Channel Reception..........................................15
 LNA (Low Noise Amplifier)..................................................15
Setting the Picture
 Changing the Picture Standard...........................................16
 Adjusting the Custom Picture..............................................16
 Configuring Detailed Settings on the Picture......................17
 Configuring Picture Option..................................................18
 Resetting the Picture Settings to the Factory Defaults........19
 Viewing the Picture In Picture (PIP)....................................20
Setting the Sound
 Sound Features...................................................................21
 Selecting the Sound Mode..................................................22
 Connecting Headphones (Sold separately)........................22
Setting the Time
 Setting and Displaying the Current Time.............................23
 Setting the Sleep Timer.......................................................23
 Switching the Television On and Off Automatically.............24
 Previewing the DTV Menu System.....................................28
 Updating the Channel List Automatically.............................29
 Updating the Channel List Manually...................................29
 Editing Your Favourite Channels.........................................30
 Selecting Channel List........................................................31
 Displaying Programme Information.....................................32
 Viewing the EPG (Electronic Programme Guide)
Information..........................................................................32
 Using the Scheduled List....................................................33
 Setting the Default Guide....................................................33
 Viewing All Channels and Favourite Channels...................34
 Adjusting the Menu Transparency.......................................34
 Setting up the Parental Lock...............................................35
 Setting the Subtitle..............................................................36
 Setting the Subtitle Mode....................................................36
 Selecting the Audio Format.................................................36
 Selecting the Audio Description..........................................37
 Selecting the Digital Text (UK only).....................................37
 Selecting the Time Zone (Spain only).................................37
 Viewing Product Information...............................................38
 Checking the Signal Information.........................................38
 Upgrading the Software......................................................38
 Viewing Common Interface.................................................39
 Selecting the CI (Common Interface) Menu........................39
 Resetting.............................................................................39
 Selecting the Preferred Language
(Subtitle, Audio or Teletext).................................................40
 Preference...........................................................................40
Setting the PC
 Setting up Your PC Software (Based on Windows XP).......41
 Display Modes.....................................................................41
 Setting up the TV with your PC...........................................42
WISELINK
 Using the WISELINK Function............................................43
 Using the WISELINK Menu.................................................44
 Using the PHOTO (JPEG) List............................................45
 Using the MP3 List..............................................................48
 Using the Setup Menu.........................................................49
About Anynet+
Function Description
 Choosing Your Language....................................................24
 Melody / Entertainment / Energy Saving . ..........................25
 Setting the Logo Lighting....................................................26
 Selecting the Source...........................................................27
 Editing the Input Source Names.........................................27
 What is Anynet+? ...............................................................50
 Connecting Anynet+ Devices..............................................50
 Setting Up Anynet+.............................................................51
 Scanning and Switching between Anynet+ Devices...........52
 Recording............................................................................53
 Listening through a Receiver..............................................54
 Check Points before Requesting Service............................54
Recommendations For Use
 Teletext Feature..................................................................55
 Troubleshooting: Before Contacting Service Personnel......57
 Technical and Environmental Specifications ......................58
Symbol
Press
Note
One-Touch
Button
English - 1
BN68-01625A-01Eng.indd 1
2008-08-19 �� 9:38:58
List of Parts
Please make sure the following items are included with your LCD TV.
If any items are missing, contact your dealer.
Remote Control & Batteries
(AA X 2ea)
Mini Remote
Control (2ea) &
Batteries(3Vx2ea)
Power Cord
RF Cable
HDMI Cable
(2ea)
HDMI/DVI Cable
D-Sub Cable
PC Audio Cable
Component Cables
Audio Cables
(3ea)
SCART Cable
(2ea)
Optical Cable
• Owner’s Instructions
➣
➣
Cleaning Cloth
• Warranty card
• Safety Guide
Warranty card / Safety Guide (Not available in all locations)
You cannot use the cover at the back of the TV unless you use the cables supplied with the TV.
However, since the cable to be connected to the Side panel is not supplied with the product, connect the Side panel using a
general off-the-shelf cable.
English - BN68-01625A-01Eng.indd 2
2008-08-19 �� 9:39:01
Viewing the Control Panel
3
➣
2
1
3
The product colour and shape may vary depending on the model.
1LOGO
You can configure the ARMANI and SAMSUNG logo lights at the bottom of the TV as required.
2REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
3SPEAKERS
English - BN68-01625A-01Eng.indd 3
2008-08-19 �� 9:39:02
Viewing the Connection Panel
[Side Panel Jacks]
1
2
3
4
5
6
3
7
8
@
!
0
9
Power Input
The product colour and shape may vary depending on the model.
➣
➣
Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
When connecting an external device, match the colour of the connection terminal to the cable.
1 PC IN [PC] / [AUDIO]
- Connect to the video and audio output jack on your PC.
2 COMPONENT IN
- Connect component video cables to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to
corresponding component video out connectors on the DTV or DVD.
- If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and
connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set.
- The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and
Cr.
- Connect RCA audio cables to [R - AUDIO - L] on the rear of your set and the other ends to corresponding audio out
connectors on the DTV or DVD.
3HDMI IN 1, HDMI IN 2, HDMI IN 3
- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
- No additional Audio connection is needed for an HDMI to HDMI connection.
- When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
➣ What is HDMI?
- “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of
digital audio.
- The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The
difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed, and supports multi - channel digital audio.
➣ The TV may not output sound and pictures may be displayed with abnormal colour when DVD players/Cable Boxes/Satellite
receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no
sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the
back of the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite receiver to confirm
the HDMI version, then request a firmware update. HDMI cables that are not 1.3 may cause annoying flicker or no screen
display.
English - BN68-01625A-01Eng.indd 4
2008-08-19 �� 9:39:02
DVI IN(HDMI2) [R-AUDIO-L]
- DVI audio outputs for external devices.
➣ Supported modes for HDMI/DVI and Component
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
480i
480p
576i
576p
720p
1080i
1080p
X
X
O
X
O
O
X
X
O
O
X
O
O
O
O
O
O
O
O
O
O
4ANT IN
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial / A cable television network / A satellite network
5 SERVICE
- Connector for SERVICE only.
6 COMMON INTERFACE Slot
- When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the
screen.
- The pairing information containing a telephone number, CI CARD ID, Host ID and other
information will be displayed in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
- When the channel information configuration has finished, the message "Updating
Completed" is displayed, indicating that the channel list is now updated.
➣ You must obtain a CI CARD from a local cable service provider. Remove the CI CARD
by carefully pulling it out with your hands since dropping the CI CARD may cause
damage to it.
➣ Insert the CI-Card in the direction marked on it.
➣
The place of the COMMON INTERFACE Slot may be different depending on its model.
7 WISELINK
- Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3).
8 S-VIDEO or VIDEO / R-AUDIO-L
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the A/V
device.
9 Headphones jack
- Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in
speakers will be disabled.
0AUDIO OUT [R-AUDIO-L]
- Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in
connectors on the Amplifier or DVD Home Theatre.
! DIGITAL AUDIO OUT (OPTICAL)
- Connect to a Digital Audio Component.
➣ When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio only. If
you want to hear 5.1 channel audio, connect the Optical jack on the DVD player or Cable/Satellite Box directly to an Amplifier
or Home Theater, not the TV.
@EXT 1, EXT 2
Connector
EXT 1
EXT 2
Video
O
O
Input
Audio (L/R)
O
O
RGB
O
Output
Video + Audio (L/R)
Only TV or DTV output is available.
Output you can choose.
- Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
English - BN68-01625A-01Eng.indd 5
2008-08-19 �� 9:39:02
Viewing the Remote Control
1 Television Standby button
2Selects the TV and DTV mode
directly
3 Number buttons for direct channel
access
4 One/Two-digit channel selection
5 + : Volume increase
– : Volume decrease
6Available source selection
7 Electronic Program Guide (EPG)
display
8 Use to quickly select frequently
used functions.
9 Use to see information on the
current broadcast
0Colour buttons :
Use these buttons in the Channel
list and WISELINK, etc.
@ Press to select the optional display
and sound modes for sports, cinema
and games.
# Use these buttons in the DMA,
WISELINK and Anynet+. (
:
This remote can be used to control
recording on Samsung recorders
with the Anynet+ feature)
$ Press to backlight the buttons on the
remote. This function is convenient
for using at night or when the room
is dark. (Using the remote control
with the
(ON/OFF) button set
to On will reduce the battery usage
time.)
% Previous channel
^ Temporary sound switch-off
& P : Next channel
P : Previous channel
* Displays the main on-screen menu
➣
(This function enables you to view
and play photo and music files from
an external device.
) Returns to the previous menu
a Control the cursor in the menu
b Exit the on-screen menu
c Use this when connecting a
SAMSUNG DMA (Digital Media
Adapter) device through an
HDMI interface and switching to
DMA mode. (The DMA button is
optional.) For more information on
the operating procedures, refer
to the user manual of the DMA.
This button is available when
“Anynet+(HDMI-CEC)” is “On” (see
page 51)
d Picture size selection
e Digital subtitle display
f Displays the Channel List on the
screen.
Teletext Functions
2Exit from the teletext display
6Teletext mode selection (LIST/FLOF)
7Teletext store
8Teletext size selection
9Teletext reveal
0Fastext topic selection
!Alternately select Teletext, Double, or Mix.
%Teletext sub page
&P : Teletext next page
P : Teletext previous page
*Teletext index
)Teletext hold
bTeletext cancel
1
2
$
3
4
5
6
%
^
P
&
7
*
(
8
)
a
9
b
0
!
@
c
d
e
f
#
The performance of the remote control may be affected by bright light.
English - BN68-01625A-01Eng.indd 6
2008-08-19 �� 9:39:03
Mini Remote Control
Mini Remote Control is a simplified remote control that consists of the
power, channel and volume buttons only.
1 Infrared - LED (Light emitting diode)
➣ Use the Mini Remote Control with the Infrared - LED (Light emitting diode)
pointing towards the TV.
2 Television Standby button
➣ This button only works when you press it for longer than 1.5 seconds.
3 : Next channel
: Previous channel
1
2
4 + : Volume increase
– : Volume decrease
3
4
4
3
Using the Remote Control Backlight Buttons
Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly.
(ON/OFF) light button.
1. Press the
➣ Pressing the
(ON/OFF) light button toggles between ON and OFF.
➣ When ON, the button backlight is turned on for a moment.
➣ Pressing a remote control button when the remote control is on turns the button
backlight on for a moment. If you touch or move the remote control and the motion is
detected by the sensor of the remote control, the button backlight will be turned on
for a moment.
➣ The remote contains two small movement sensors that control the backlight function.
If you shake or drop the remote, you may hear the sensors rattle. This is normal and
is not a defect.
➣ The button backlight will not be turned on when the remote control is turned off.
P
English - BN68-01625A-01Eng.indd 7
2008-08-19 �� 9:39:03
Installing Batteries in the Remote Control
Normal Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AA size batteries.
➣ Make sure to match the "+" and "–" ends of the batteries with the diagram inside
the compartment.
3. Replace the cover.
➣ Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time.
➣ Using the remote control with the
(ON/OFF) button set to On will reduce the
battery usage time.
Mini Remote Control
1. Press the left and right grooves of the remote control battery compartment cover
inwards at the same time.
➣ The remote control battery compartment cover will be projected outwards slightly.
2. Pull the groove at the bottom of the remote control battery compartment cover forwards
to separate the cover.
3. Insert the corresponding 3V(CR2450) Lithium battery.
4. Put the battery cover in.
➣
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?
English - BN68-01625A-01Eng.indd 8
2008-08-19 �� 9:39:04
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
2. Press the POWER button or the TV/DTV button on the remote control to turn the TV on.
➣ The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up/down ( / ) button on the remote control.
➣ When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.
4. To switch your set off, press the POWER button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful
when you wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER button on the remote control.
➣ The screen of the TV is turned off.
2. To switch your set back on, simply press the POWER , numeric buttons (0~9), TV/DTV button or channel up/down (
button again.
➣ Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).
It is best to unplug the set from the mains and aerial. /
)
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side has icons: Picture, Sound,
Channel, Setup, Input, Digital Menu.
2. Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
➣ The on-screen menus disappear from the screen after about one minute.
TV
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G50R50
Detailed Settings 
P
sMore
Move Enter
Return
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and
easily. The “Tools” menu change depending on which external input mode you are
viewing.
1. Press the TOOLS button.
The “Tools” menu will appear.
2. Press the ▲ or ▼ button to select a menu.
3. Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected items.
For a more detailed description of each function, refer to the corresponding page.
Tools
Anynet+ (HDMI-CEC)
Picture Mode Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
:
Off
:
Off
:
Off
:Mono
Enter
P
e Exit
♦ Anynet+ (HDMI-CEC), see page 51
♦ Picture Mode, see page 16
♦ Sound Mode, see page 21
♦ Sleep Timer, see page 23
♦ SRS TS XT, see page 21
♦ Energy Saving, see page 25
♦ Dual l-ll, see page 22
♦ PIP (Component, HDMI, PC mode), see page 20
♦ Auto Adjustment (PC mode), see page 42
English - BN68-01625A-01Eng.indd 9
2008-08-19 �� 9:39:05
Plug & Play
When the TV is initially powered on, several basic settings proceed automatically and
subsequently. The following settings are available.
Plug & Play
➣
Any functions related to Digital TV (DVB) will only work in countries or areas where
DVB-T (MPEG2) digital terrestrial signals are broadcasted. Please confirm with your
Start Plug & Play.
local dealer if you can receive DVB-T signals. Although this TV set follows the DVB-T
OK
specification, maintaining compatibility with the future coming DVB-T digital terrestrial
broadcasts is not guaranteed. Several functions may not be available in some countries.
1. Press the POWER button on the remote control.
Enter
The message "Start Plug & Play" is displayed with "OK" selected.
2. Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
3. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.
➣ We recommend setting the TV to "Home Use" mode for the best picture in your home environment.
➣ "Store Demo" mode is only intended for use in retail environments.
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER button.
➣ Please check that the antenna cable is connected correctly.
5. Select the appropriate country by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
6.The message “Some DTV functions may not be available. Digital Scan?” is displayed.
Press the ◄ or ► button to select “Yes” or “No”, then press the ENTER button.
♦ Yes: First an ATV search is performed and then a DTV ch. auto search is performed.
♦ No: Only an ATV search is performed.
➣
his function is supported for all countries except for the following countries: France, Germany, Italy, Netherlands, Spain,
T
Switzerland, United Kingdom, Austria.
7. The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER button.
➣ The channel search will start and end automatically.
The DTV channel scan menu appears and the DTV channel is automatically updated.
➣ If the DTV channel is updated, the Source in the source list of the Input menu is automatically changed to DTV. After all the
available channels are stored, the "Clock Set" menu appears.
➣ Press the ENTER button at any time to interrupt the memorization process.
➣ For detailed descriptions about DTV channel update, refer to page 29 of this manual.
After all the available digital channels are stored, the screen to select a time zone is displayed depending on the country.
8. Press the ENTER button.
Select the "Month", "Day", "Year", "Hour", or "Min" by pressing the ◄ or ► button.
Set the "Month", "Day", "Year", "Hour", or "Min" by pressing the ▲ or ▼ button.
➣ You can also set the “Month”, “Day”, “Year”, “Hour” and "Min" by pressing the number buttons on the remote control.
9.Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed. When you have finished,
press the ENTER button.
➣ Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.
♦ Language: Select your language.
♦ Country: Select your country.
♦ Auto Store: Automatically scans for and stores channels available in the local area.
♦ Clock Set: Sets the current time for the TV clock.
English - 10
BN68-01625A-01Eng.indd 10
2008-08-19 �� 9:39:05
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER
2. Press the ENTER button again, to select "Plug & Play".
For further details on setting up options, refer to the page 10.
➣ The “Plug & Play” feature is only available in the TV mode.
button.
TV
Setup
Plug & Play
:English
Language
Time
: Off
Melody
Entertainment : Off
Energy Saving : Off
PIP
Logo Lighting : Both On
Move Enter








Return
Plug & Play
Start Plug & Play.
OK
Enter
Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on
your country).
Automatically allocated programme numbers may not correspond to actual or
desired programme numbers. However, you can sort numbers manually and clear any
channels you do not wish to watch.
TV
Channel
:United Kingdom
Country
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
:Off 
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
2. Press the ENTER button to select "Country".
Move Enter
Return
3. Select the appropriate country by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
➣ Even though you have changed the country setting in this menu, the country setting for DTV is not changed. (Refer to
page 29)
4. Press the ▲ or ▼ button to select "Auto Store", then press the ENTER button.
5. Press the ENTER button.
➣ The TV will begin memorizing all of the available channels.
➣ Press the ENTER button at any time to interrupt the memorization process and return to the "Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears. (refer to page 14)
English - 11
BN68-01625A-01Eng.indd 11
2008-08-19 �� 9:39:06
Storing Channels Manually
➣
Not available in DTV or external input mode.
You can store television channels, including those received via cable networks.
When storing channels manually, you can choose:
♦ Whether or not to store each of the channels found.
♦ The programme number of each stored channel which you wish to identify.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
2.Press the ▲ or ▼ button to select "Manual Store", then press the ENTER button.
3.Select the required option by pressing the ▲ or ▼ button, then press the ENTER
button.
4.When you are satisfied with your setting, press the ENTER button.
5. Press the EXIT button to exit.
♦ Programme (Programme number to be assigned to a channel)
- Press the ▲ or ▼ button until you find the correct number.
➣ You can also select the channel number directly by pressing the numeric buttons
(0~9).
Channel
TV
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
:Off 
Move TV
Enter
Return
Manual Store
Programme Colour System Sound System Channel Search Store Move :P2
: Auto 
: BG 
:C3
: 77 MHz
:?
Enter
Return
♦ Colour System: Auto/PAL/SECAM/NTSC4.43
- Press the ▲ or ▼ button to select the required colour standard.
♦ Sound System: BG/DK/I/L
- Press the ▲ or ▼ button to select the required sound standard.
♦ C
hannel (When you know the number of the channel to be stored)
- Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
- Press the ► button, then press the ▲ or ▼ button to select the required number.
➣ You can also select the channel number directly by pressing the numeric buttons (0~9).
➣ If there is abnormal sound or no sound, re-select the sound standard required.
♦ Search (When you do not know the channel numbers)
- Press the ▲ or ▼ button to start the search.
- The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.
♦ Store (When you store the channel and associated programme number)
- Set to "OK" by pressing the ENTER button.
➣ Channel mode
- P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position
numbers from P00 to P99. You can select a channel by entering the position number in this mode.
- C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this
mode.
- S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
English - 12
BN68-01625A-01Eng.indd 12
2008-08-19 �� 9:39:06
Adding / Locking Channels
➣ Not available in DTV or external input mode.
Using the Channel Manager, you can conveniently lock or add channels.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER
Channel
TV
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
:Off 
button.
♦ Adding channels
Using the Channel List, you can add channels.
3. Select "Channel List" by pressing the ENTER button.
4.Move to the ( ) field by pressing the ▲, ▼, ◄ or ► button, select a channel to be
added, and press the ENTER button to add the channel.
➣ If you press the ENTER button again, the ( ) symbol next to the channel
disappears and the channel is not added.
➣ " " is active when "Child Lock" is selected to "On".
5. Press the ▲ or ▼ button to select "Child Lock", then press the ENTER button.
6.Select "On" by pressing the ▲ or ▼ button, then press the ENTER button.
7. Press the ▲ or ▼ button to select "Channel List", then press the ENTER button.
8.Move to the " " field by pressing the ▲, ▼, ◄ or ► button, select a channel to be
locked, and press the ENTER button.
➣ If you press the ENTER button again, the ( ) symbol next to the channel
disappears and the channel lock is cancelled.
➣ A blue screen is displayed when "Child Lock" is activated.
9. Press the EXIT button to exit.
➣ Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on
" " to be active or inactive.
Enter
Return
Channel Manager
Channel List 
Child Lock
: Off 
TV
♦ Locking channels
This feature allows you to prevent unauthorized users, such as children, from watching
unsuitable programmes by muting out video and audio.
Move Move Enter
Return
Channel List
P1 C3
1 / 10
Prog.
0
C--
1
C3
2
BBC 1
P
3 C74
4 C75
5 C76
6 S3
7 S4
8 S6
9 S7
Add
Lock
Move
Enter
Page
Return
You can select these options by simply pressing the CH LIST button on the remote
control.
English - 13
BN68-01625A-01Eng.indd 13
2008-08-19 �� 9:39:07
Sorting the Stored Channels
This operation allows you to change the programme numbers of the stored channels.
This operation may be necessary after using the auto store.
TV
➣
Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Sort", then press the ENTER button.
3. Select the channel number that you wish to change by pressing the ▲ or ▼ button.
Press the ENTER button.
➣ The selected channel number and name are moved to right side.
4.Select the number of the programme to which the channel is to be moved by pressing
the ▲ or ▼ button.
5.Press the ENTER button.
The channel is moved to its new position and all other channels are shifted accordingly.
6. Repeat steps 3 to 5 for another channel to be sorted.
7. Press the EXIT button to exit.
Channel
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
:Off 
Move TV
Enter
Return
Sort
Prog.
0
1
2
3
4
Ch.Name

C-
C23
C16
C3
S1

Move Enter
Return
Assigning Channels Names
Channel names will be assigned automatically when channel information is broadcast.
These names can be changed, allowing you to assign new names.
TV
➣
Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Name", then press the ENTER button.
3. If necessary, select the channel to be assigned to a new name by pressing the ▲ or ▼
button. Press the ENTER button
➣ The selection bar is displayed around the name box.
4.
To...
Then...
Select a letter, number or symbol
Press the ▲ or ▼ button
Move on the next letter
Press the ► button
Move back the previous letter
Press the ◄ button
Confirm the name
Press the ENTER
button
Channel
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
:Off 
Move Enter
Return
Name
TV
Prog.
0
1
2
3
4
Ch.Name

C--
----C23 -----
C16 ----C3
--------S1

Move Enter
Return
➣
The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9)
/ Special characters (+, -, *, /, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
English - 14
BN68-01625A-01Eng.indd 14
2008-08-19 �� 9:39:08
Fine Tuning Channel Reception
Use fine tuning to manually adjust a particular channel for optimal reception.
➣
1.
2.
3.
4.
5.
➣
➣
Not available in DTV or external input mode.
Use the number buttons to directly select the channel that you want to fine tune.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button.
Press the ◄ or ► button to adjust the fine tuning.
Press the ENTER button.
Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk "*" on the righthand side of the channel number in the channel banner. And the channel number turns
red.
To reset the fine-tuning, select "Reset" by pressing the ▲ or ▼ button and then press the
ENTER button.
TV
Channel
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
:Off 
Move Enter
Return
Fine Tune
P1
0
Reset
Adjust Save
Return
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, the LNA function can improve the reception
(a low-noise preamplifier boosts the incoming signal).
➣ Not available in DTV or external input mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
2. Press the ▲ or ▼ button to select "LNA", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Off" or "On". Press the ENTER button.
4. Press the EXIT button to exit.
TV
Channel
Country
:United Kingdom
Auto Store 
Manual Store 
Channel Manager 
Sort 
Name 
Fine Tune 
LNA
:Off 
TV
Move Enter
Return
Channel
Country
:United Kingdom
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
LNA
:Off
Off
On
Move Enter
Return
English - 15
BN68-01625A-01Eng.indd 15
2008-08-19 �� 9:39:09
Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing
equirements.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button again, to select "Mode".
3. Press the ▲ or ▼ button to select the desired picture effect.
Press the ENTER button.
4. Press the EXIT button to exit.
TV
TV
♦ Dynamic: Selects the picture for high-definition in a bright room.
♦ Standard: Selects the picture for optimum display in a normal environment.
♦ Movie: Selects the picture for comfortable display in a dark room.
➣
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G50R50
Detailed Settings 
sMore
Move Enter
Return
Picture
Dynamic Mode
:Standard
Standard 7
Backlight
Movie 95
Contrast
Brightness 45
Sharpness 50
Colour 50
Tint
G50R50
Detailed Settings sMore
The Picture mode must be adjusted separately for each input source.
Move Enter
Return
Tools
Easy Setting
1. Press the TOOLS button on the remote control.
2.Press the ▲ or ▼ button to select “Picture Mode”.
3.Press the ◄ or ► button to select the desired picture mode.
4. Press the EXIT or TOOLS button to exit.
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move ◄ Standard
: Custom
:
Off
:
Off
:
Off
:Mono
Adjust
►
e Exit
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1. To select the desired picture effect, follow the "Changing the Picture Standard"
instructions number 1 to 3. (On page 16).
2.Press the ▲ or ▼ button to select a particular item. Press the ENTER button.
3.Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
4. Press the EXIT button to exit.
♦ Backlight: Adjusts the screen brightness by adjusting the LCD backlight brightness.
(0~10)
♦ Contrast: Adjusts the lightness and darkness between objects and the background.
♦ Brightness: Adjusts the brightness of the whole screen.
♦ Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
♦ Colour: Adjusts the colours, making them lighter or darker.
♦ Tint: Adjusts the colour of objects, making them more red or green for a more natural look.
➣
➣
➣
➣
➣
TV
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G50R50
Detailed Settings 
sMore
Move Enter
Return
▲
Backlight
7
▼
Move
Adjust Return
The adjusted values are stored according to the selected Picture mode.
In PC mode, you can only make changes to "Backlight”, “Contrast" and “Brightness”.
In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the "Tint"
Function.
You can return to the factory defaults picture settings by selecting the "Reset".
(Refer to "Resetting the Picture Settings to the Factory Defaults" on page 19)
The energy consumed during use can be significantly reduced if the level of brightness of
the picture is reduced, and then this will reduce the overall running cost.
English - 16
BN68-01625A-01Eng.indd 16
2008-08-19 �� 9:39:10
Configuring Detailed Settings on the Picture
You can set detailed picture settings.
TV
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Press the ENTER button to select “Mode”.
Press the ▲ or ▼ button to select “Standard” or “Movie”, then press the ENTER
button.
3. Press the ▲ or ▼ button to select "Detailed Settings", then press the ENTER button.
4. Select the required option by pressing the ▲ or ▼ button, then press the ENTER
button.
5. When you are satisfied with your setting, press the ENTER button.
6. Press the EXIT button to exit.
➣ "Detailed Settings" is available in "Standard" or "Movie" mode.
➣ In PC mode, you can only make changes to “Dynamic Contrast”, “Gamma” and “White
Balance” from among the “Detailed Settings” items.
♦ Black Adjust: Off/Low/Medium/High
You can directly select the black level on the screen to adjust the screen depth.
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 45
Sharpness 50
Colour 50
Tint
G50R50
Detailed Settings 
sMore
TV
Move Enter
Return
Detailed Settings
Black Adjust
:Off
Dynamic Contrast:Medium
Gamma
:0
Colour Space
: Native
White Balance
: 0
Flesh Tone
Edge Enhancement:On
xvYCC
:Off
Move Enter








Return
♦ Dynamic Contrast: Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
♦ Gamma: -3 ~ +3
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Press the ◄ or ► button until you reach the optimal setting.
♦ Colour Space: Auto/Native/Custom
Colour space is a colour matrix composed of "Red", "Green" and "Blue" colours.
Select your favourite Colour space to experience the most natural Colour.
♦ Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.
♦ Native: Native Colour Space offers deep and rich colour tone.
♦ Custom: Adjusts the colour range to suit your preference.
➣
Customizing the Colour Space
Colour: Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference.
“Colour” is available when “Colour Space” is set to “Custom”.
Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.
Press the ENTER button.
Red/Green/Blue: In “Colour”, you can adjust the RGB values for the selected colour.
Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it.
Press the ENTER button.
Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER
Reset: Resets the colour space to the default values.
button.
♦ White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset
You can adjust the colour temperature for more natural picture colours.
R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
♦ Flesh Tone: -15 ~ +15
You can emphasize the pink 'flesh tone' in the picture.
Press the ◄ or ► button until you reach the optimal setting.
➣ Changing the adjustment value will refresh the adjusted screen.
♦ Edge Enhancement: Off/On
You can emphasize object boundaries in the picture.
♦ xvYCC: Off/On
Setting the xvYCC mode to On increases detail and colour space when watching movies from an external device (ie. DVD
player) connected to the HDMI or Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature.
➣ Only available in "HDMI" and "Component" on "Movie" mode.
➣ If xvYCC function is active, PIP cannot be selected.
English - 17
BN68-01625A-01Eng.indd 17
2008-08-19 �� 9:39:10
Configuring Picture Option
1. 2. 3. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
Press the ▲ or ▼ button to select "Picture Options", then press the ENTER button.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER
button.
4. When you are satisfied with your setting, press the ENTER button.
5. Press the EXIT button to exit.
➣
In PC mode, you can only make changes to the “Colour Tone” and “Size” from
among the items in “Picture Options”.
♦ Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can select the most comfortable colour tone to your eyes.
➣
➣
The adjusted values are stored according to the selected "Picture" mode.
“Warm1” or “Warm2” is only activated when the picture mode is "Movie".
TV
Picture
More
Picture Options 
: OK 
Reset
TV
Move Enter
Return
Picture Options
Colour Tone
:Normal
Size
:Auto Wide
Screen Mode
:16:9
:Auto
Digital NR
DNIe
:Off HDMI Black Level :Normal
100Hz Motion Plus:Off
Blue Only Mode :Off
Move Enter








Return
♦ Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
♦ Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
♦ 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
♦ Wide Zoom: Magnify the size of the picture more than 4:3.
♦ Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
♦ 4:3: This is the default setting for a video movie or normal broadcasting.
♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p) or Component
(1080i/1080p) signals are input.
➣
➣
➣
➣
➣
➣
➣
➣
➣
"Auto Wide" function is available only in "TV", "DTV", "Ext.1", "Ext.2", "AV", and "S-Video" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
P
Temporary image retention may occur when viewing a static image on the set for more than two hours.
Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the
by pressing the ► or ENTER
button.
Zoom: Select
by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up and down. After selecting
, use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
When Double (
,
) mode has been set in PIP, the Picture Size cannot be set.
After selecting “Just Scan” in HDMI (1080i/1080p) or Component (1080i/1080p) mode:
Select
by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button. You can initialize the setting.
If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
overscan function.
You can select these options by simply pressing the P.SIZE button on the remote
control.
♦ Screen Mode: 16:9/Wide Zoom/Zoom/4:3
When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you want to see the 4:3
WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function
is intended for users to select it.
♦ 16:9: Sets the picture to 16:9 wide mode.
♦ Wide Zoom: Magnify the size of the picture more than 4:3.
♦ Zoom: Magnify the size of the picture vertically on screen.
♦ 4:3: Sets the picture to 4:3 normal mode.
➣
➣
This function is available in "Auto Wide" mode.
This function is not available in "PC", "Component" or "HDMI" mode.
♦ Digital NR: Off/Low/Medium/High/Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any
static and ghosting that may appear on the screen.
➣ When the signal is weak, select one of the other options until the best picture is displayed.
English - 18
BN68-01625A-01Eng.indd 18
2008-08-19 �� 9:39:11
♦ DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with
the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for
demonstration purposes. Using this function, you can view the difference in the visual quality.
➣ DNIe™ (Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and
white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIe™
technology will fit every signal into your eyes.
➣ This function is not available in "Movie" and "Standard" mode.
♦ HDMI Black Level: Normal/Low
You can directly select the black level on the screen to adjust the screen depth.
➣ This function is active only when the external input connects to HDMI(RGB signals).
♦ 100Hz Motion Plus: Off/Low/Medium/High/Demo
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
➣ This function is not available in PC mode.
➣ If you enable "100 Hz Motion Plus", noise may appear on the screen. If this occurs, set "100Hz Motion Plus" to "off" or
select one of the other options.
♦ Blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green
signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment
such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal level of each video device
using the Red/Green/Blue/Cyan/Magenta/Yellow Colour Bar Patterns, without using an additional Blue Filter.
➣ “Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.
Resetting the Picture Settings to the Factory Defaults
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the "Changing the Picture Standard"
instructions number 1 to 3 (On page 16).
2. Press the ▲ or ▼ button to select "Reset", then press the ENTER button.
3. Press the ▲ or ▼ button to select "OK" or "Cancel".
Press the ENTER button.
4. Press the EXIT button to exit.
➣ The "Reset" will be set for each "Picture" mode.
TV
Picture
More
Picture Options
OK
Reset
: OK Cancel
Move Enter
Return
English - 19
BN68-01625A-01Eng.indd 19
2008-08-19 �� 9:39:11
Viewing the Picture In Picture (PIP)
You can display a sub picture within the main picture of set programme or video
input. In this way, you can watch the picture of set programme or video input from
any connected equipment while watching the main picture.
➣
TV
Preset: Press the SOURCE button to Select the required device(Main picture).
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select “PIP”, then press the ENTER button.
3. Press the ENTER button to select “PIP”.
Press the▲ or ▼ button to select "On", then press the ENTER button.
4.Select the required option by pressing the ▲ or ▼ button, then press the ENTER
button.
5.When you are satisfied with your setting, press the ENTER button.
6. Press the EXIT button to exit.
➣ You may notice that the picture in the PIP window becomes slightly unnatural when you
use the main screen to view a game or karaoke.
Setup
Plug & Play
:English
Language
Time
: Off
Melody
Entertainment : Off
Energy Saving : Off
PIP
Logo Lighting : Both On
TV
Move 







Enter
Return
Mode
:Custom
PIP
Equalizer
On PIP
:
:Off
SRS TS XT
:TV
Source
:Off
Auto Volume
:
Size
:Off
Internal Mute
:
Position
Reset
:P 1
Programme
MoveEnter
Move 









Return
Enter
Return
Tools
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “PIP”, then press the ENTER
3. Press the ◄ or ► button to select the “On”.
4. Press the ▲ or ▼ button to select a particular item.
5. Press the ◄ or ► button to select the required option.
6. Press the EXIT or TOOLS button to exit.
button.
Move :
:
:
:
:
Standard
Custom
Off
Off
Off
Enter
e Exit
PIP
PIP
Source
Programme
Size
Position
♦ PIP: On/Off
You can activate or deactivate the PIP function.
Main picture
Anynet+ (HDMI-CEC)
Picture Mode Sound Mode Sleep Timer SRS TS XT
Energy Saving PIP
:
◄ On
:TV
:
P1
:
:
►
Sub picture
Component
TV, Ext.1, Ext.2, AV, DTV
HDMI 1, 2, 3
TV, Ext.1, Ext.2, AV, DTV
PC
TV, Ext.1, Ext.2, AV, DTV
Move Adjust
Return
♦ Source
You can select a source of the sub-picture.
/
/
♦ Size:
You can select a size of the sub-picture.
➣ If main picture is in "HDMI" mode, "Size" is available.
♦ Position:
/
/
/
You can select a position of the sub-picture.
➣ In Double ( , ) mode, "Position" cannot be selected.
♦ Programme
You can select a channel of the sub-picture only when the "Source" is set to "TV" or "DTV".
English - 20
BN68-01625A-01Eng.indd 20
2008-08-19 �� 9:39:12
Sound Features
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound",
then press the ENTER button.
2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER
button.
3. When you are satisfied with your setting, press the ENTER button.
4. Press the EXIT button to exit.
Sound
TV
TV
♦ Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used when watching a given
broadcast.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select "Sound Mode".
3. Press the ◄ or ► button to select the desired sound mode.
4. Press the EXIT or TOOLS button to exit.
♦ Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The sound settings can be adjusted to suit your personal preferences.
➣ If you make any changes to these settings, the sound mode is automatically
switched to "Custom".
Mode
:Custom
Equalizer
:Off
SRS TS XT
:Off
Auto Volume
:On
TV Speaker
:Main
Sound Select
Move Enter






Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
◄ Custom ►
:
Off
:
Off
:
Off
:Mono
Adjust
e Exit
Equalizer
TV
R
L
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
♦ SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1
multichannel content over two speakers. TruSurround delivers a compelling, virtual
surround sound experience through any two-speaker playback system, including internal
television speakers. It is fully compatible with all multichannel formats.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “SRS TS XT”.
3. Press the ◄ or ► button to select the "Off" or "On".
4. Press the EXIT or TOOLS button to exit.
TruSurround XT, SRS and
Symbol are trademarks of
SRS Labs, Inc.TruSurround XT technology is incorporated
under license from SRS Labs, Inc.
Move Adjust
Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
:Off
◄
Off
:Off
:Mono
Adjust
►
e Exit
♦ Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust
the volume every time the channel is changed. This feature lets you automatically adjust
the volume of the desired channel by lowering the sound output when the modulation
signal is high or by raising the sound output when the modulation signal is low.
♦ TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➣ The +, - and MUTE buttons do not operate when the "TV Speaker" is set to
"Off".
➣ When “TV Speaker” is set to “Off”, you can operate only “Sound Select” (in PIP
mode) in Sound menu.
♦ Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
English - 21
BN68-01625A-01Eng.indd 21
2008-08-19 �� 9:39:13
Selecting the Sound Mode
You can set the sound mode in the "Tools" menu.
When you set to "Dual I-II", the current sound mode is displayed on the screen.
1.
2.
3.
4.
Press the TOOLS button on the remote control.
Press the ▲ or ▼ button to select “Dual I-II".
Press the ◄ or ► button to select required option.
Press the ENTER button.
A2
Stereo
NICAM
Stereo
➣
➣
➣
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
Dual 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
Default
Automatic
change
DUAL 1
Automatic
change
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
:Off
:Off
:Off
◄ Mono ►
Adjust
e Exit
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in Analogue TV mode.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to watch a TV programme
without disturbing the other people in the room.
➣
➣
➣
➣
TV Side Panel
When you insert the head set jack into the corresponding port, you can operate only "Auto
Volume" and "Sound Select"(in PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
English - 22
BN68-01625A-01Eng.indd 22
2008-08-19 �� 9:39:13
Setting and Displaying the Current Time
You can set the TV’s clock so that the current time is displayed when you press the
INFO button. You must also set the time if you wish to use the automatic On/Off
timers.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.
3. Press the ENTER button to select "Clock Set".
4.
To...
Press the....
Move to "Month", "Day", "Year", "Hour" or "Minute"
◄ or ► button.
Set the "Month", "Day", "Year", "Hour" or "Minute"
▲ or ▼ button.
Confirm the setting
ENTER
TV
Mode
:Custom 
Setup
Equalizer 
Plug
&
Play
:Off 
SRS TS XT
Language
:Off 
Auto Volume :English
Time
:Off 
Internal Mute
: Off

Melody
Reset

Entertainment : Off

Energy Saving : Off
PIP

Logo Lighting
: Both On Return

MoveEnter
Move Enter
Clock Set
TV
Month
p
01
q
Hour
00
button
5. Press the EXIT button to exit.
➣ You can also set "Month", "Day", "Year", "Hour" and "Minute" by pressing the number
buttons on the remote control.
➣ If you disconnect the power cord, you have to set the clock again.
Return
Day
Year
01
2008
Minute
00
Move Adjust
Return
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after which the television
automatically switches to standby mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER button.
4. Press the ▲ or ▼ button repeatedly until the desired time appears (Off, 30, 60, 90, 120,
150, 180).
Press the ENTER button.
5. Press the EXIT button to exit.
➣ The TV automatically switches to standby mode when the timer reaches 0.
Easy Setting
1. Press the TOOLS button on the remote control.
2.Press the ▲ or ▼ button to select “Sleep Timer”.
3.Press the ◄ or ► button to select the minute.
4. Press the EXIT or TOOLS button to exit.
TV
Mode
:Custom 
Setup
Equalizer 
Plug
& Play
XT
:Off 
SRS TS
Language
:Off 
Auto Volume :English
Time
:Off 
Internal Mute
: Off

Melody
Reset

Entertainment : Off

Energy Saving : Off
PIP

Logo Lighting
: Both On Return

MoveEnter
Move Enter
TV
Return
Time
Clock Set
Sleep Timer
Timer 1
Timer 2
Timer 3
: 00:00
:
Off
:
30
60
:
90
:
120
150
180
Move Enter
Return
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
◄Off
:Off
:Off
:Mono
Adjust
►
e Exit
English - 23
BN68-01625A-01Eng.indd 23
2008-08-19 �� 9:39:14
Switching the Television On and Off Automatically
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Time", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Timer 1", "Timer 2", "Timer 3", then press the
ENTER button.
Three different On/Off Timer Settings can be made.
➣ You must set the clock first.
4.Press the ◄ or ► button to select the required item below.
Press the ▲ or ▼ button to adjust to the setting satisfied.
♦ On Time : Select hour, minute and "Activate"/"Inactivate".
(To activate timer with the setting satisfied, set to "Activate".)
♦ Off Time : Select hour, minute and "Activate"/"Inactivate".
(To activate timer with the setting satisfied, set to "Activate".)
♦ Volume : Select the desired turn on volume level.
♦ Repeat : Select "Once", "Everyday", "Mon~Fri", "Mon~Sat" or "Sat~Sun".
➣ You can set the hour and minute directly by pressing the number buttons on the remote
control.
➣ Auto Power Off
When you set the timer On, the TV will eventually turn off, if no controls are operated for
3 hours after the TV was turned on by timer. This function is only available in timer On
mode and prevents overheating, which may occur if a TV is on for too long time.
TV
Setup
Plug & Play
:English
Language
Time
: Off
Melody
Entertainment : Off
Energy Saving : Off
PIP
Logo Lighting : Both On
TV
Move Enter








Return
Timer 1
On Time
5
00 : 00
6
Off Time
00 : 00
Inactivate
Inactivate
Volume
10
Repeat
Once
► Move Adjust
Return
Choosing Your Language
When you start using your set for the first time, you must select the language which
will be used for displaying menus and indications.
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Language", then press the ENTER button.
3. Select a particular language by pressing the ▲ or ▼ button repeatedly.
Press the ENTER button.
4. Press the EXIT button to exit.
TV
Setup
Plug & Play
:English
Language
Time
: Off
Melody
Entertainment : Off
Energy Saving : Off
PIP
Logo Lighting : Both On
Move Enter








Return
English - 24
BN68-01625A-01Eng.indd 24
2008-08-19 �� 9:39:15
Melody / Entertainment / Energy Saving
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2.Select the required option by pressing the ▲ or ▼ button, then press the ENTER
button.
3.When you are satisfied with your setting, press the ENTER button.
4.Press the EXIT button to exit.
TV
Mode
:Custom 
Setup
Equalizer 
Plug
& Play
XT
:Off 
SRS TS
Language
:Off 
Auto Volume :English
Time
:Off 
Internal Mute
: Off

Melody
Reset

Entertainment : Off

Energy Saving : Off
PIP

Logo Lighting
:
Both
On

MoveEnter
Return
♦ Melody: Off/Low/Medium/High
The TV power on/off melody sound can be adjusted.
➣ The Melody does not play
− When no sound is output from the TV because the MUTE button has been
pressed.
− When no sound is output from the TV because the – (Volume) button has been
pressed.
− When the TV is turned off by the Sleep Timer function.
Move Enter
♦ Entertainment: Off/Sports/Cinema/Game
The “Entertainment” mode enables you to select the optimal display and sound for
sports, cinema and games.
− Off: Switch the "Entertainment" function off.
− Sports: Provides the optimal picture and sound quality for sports. You can enjoy more
thrilling colour and sound.
− Cinema: Provides the optimal picture and sound quality for cinema. You can
experience a richer picture and enhanced sound.
− Game: Provides the optimal picture and sound quality for games. This mode
accelerates the playing speed when using an external game console connected
to the TV.
➣
➣
➣
Return
P
If you set any of the three “Entertainment” modes to On, the settings will be locked
and can not be adjusted. If you want to make Picture and Sound mode adjustments,
the “Entertainment” mode must be turned off.
The “Entertainment” settings are saved for each input source.
If you set any of the three “Entertainment” modes to On, “SRS TS XT” and
“Equalizer” functions are not available.
You can press the E.MODE button on the remote control repeatedly to change the
“Entertainment” setting.
♦ Energy Saving: Off/Low/Medium/High/Auto
This feature adjusts the screen brightness depending on the surrounding lighting
conditions.
− Off: Turns off the energy saving function.
− Low: Sets the TV to low energy saving mode.
− Medium: Sets the TV to medium energy saving mode.
− High: Sets the TV to high energy saving mode.
− Auto: Automatically adjusts the brightness of the TV screen in accordance with the
scenes.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Energy Saving”.
3. Press the ◄ or ► button to select the "Off", "Low", "Medium", "High" or "Auto".
4. Press the EXIT or TOOLS button to exit.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move : Standard
: Custom
:Off
:Off
◄
Off
:Mono
Adjust
►
e Exit
English - 25
BN68-01625A-01Eng.indd 25
2008-08-19 �� 9:39:15
Setting the Logo Lighting
You can configure the ARMANI and SAMSUNG logo lights at the bottom of the TV as
required.
TV
1. Press the MENU button to display the on-screen menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Logo Lighting", then press the ENTER button.
3. S
elect the required option by pressing the ▲ or ▼ button, then press the ENTER
button. 4. Press the EXIT button to exit.
♦ Off: Turns the logo lights off.
♦ One On: Turns on the Armani Symbol logo in standby mode and Armani/
Samsung logo while watching TV.
♦ Both On: Turns on the Armani Symbol logo in standby mode and both logos
while watching TV.
♦ On: Turns the logo lights on at all times.
Setup
Plug & Play
:English
Language
Time
: Off
Melody
Entertainment : Off
Energy Saving : Off
PIP
Logo Lighting : Both On
TV
Move Enter








Return
Setup
Plug & Play
Language
:English
Time
Melody
: Off
Entertainment : Off
Energy Saving : Off Off
PIP
One On
Both
On
On
Logo Lighting : Both
On
Move Enter
Return
English - 26
BN68-01625A-01Eng.indd 26
2008-08-19 �� 9:39:16
Selecting the Source
You can select among external sources connected to your TV’s input jacks.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the ENTER
TV
button.
Mode
:Custom
Input
Equalizer
:TV
Source
XT
:Off
SRS TS List
Edit Name
:Off
Auto Volume
Anynet+(HDMI-CEC)
Mute
:Off
Internal
WISELINK
Reset
MoveEnter
2. Press the ENTER button again, to select "Source List".
➣ When no external device is connected to your set, only "TV", "Ext.1", "Ext.2", "DTV"
are activated in the "Source List". "AV", "S-Video", "Component", "PC", "HDMI1",
"HDMI2", "HDMI3" are activated only when they are connected to your set.
3. Select the required device by pressing the ▲ or ▼ button.
Press the ENTER button.
TV
Move Enter







Return
Return
Mode
:Custom

Source
List
Equalizer 
TV
:Off 
SRS TS XT
Ext.1
:---:Off 
Auto Volume
Ext.2
:---:Off 
Internal Mute
AV
:---Reset
S-Video
:---Component
:---PC
:---sMore
MoveEnter
Return
Move Press the SOURCE button on the remote control to toggle between all the available
source.
TV mode can be selected by pressing the TV/DTV button, number buttons(0~9), and the
P / button on the remote control.
Enter
Return
P
P
P
Editing the Input Source Names
Name the device connected to the input jacks to make your input source selection
easier.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button.
3. Press the ▲ or ▼ button to select the device that you wish to edit.
Press the ENTER button.
4. Press the ▲ or ▼ button to select the required device.
Press the ENTER button.
5. Press the EXIT button to exit.
➣ When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 2
port, you should set the "HDMI2" mode to "PC" in the "Edit Name" of the "Input" mode.
TV
Mode
:Custom
Input
Equalizer
List
:TV
Source
:Off
SRS TS XT
Edit Name
Volume
:Off
Auto
Anynet+(HDMI-CEC)
:Off
Internal Mute
WISELINK
Reset
MoveEnter
TV
Move Enter







Return
Return
Mode

Edit:Custom
Name
Equalizer 
Ext.1
:------:Off

SRS TS XT
Ext.2
:---VCR
:Off

Auto Volume
DVD
AV
:---:Off

Internal Mute
S-Video
:----Cable STB
Reset
Satellite
STB
Component
:---PVR STB
PC
:
AV Receiver
HDMI1
:
s
HDMI2
:
MoveEnter
Return
HDMI3
:
Move Enter
Return
English - 27
BN68-01625A-01Eng.indd 27
2008-08-19 �� 9:39:17
Previewing the DTV Menu System
 The company does not guarantee the normal operation of the DTV menu for countries
other than the supported countries (France, Germany, Italy, Netherlands, Spain,
Switzerland, United Kingdom, Austria) because only these country standards are
supported.
In addition, when the country of the broadcast stream differs from the country selected
by the current user, the string appearing in the channel banner, Info, Guide, Channel
Manager, etc. may not be displayed properly.
 Available in DTV mode. Preset to the DTV mode by using the TV/DTV button on your
remote control. To help you navigate around the on-screen menu system and adjust the
various settings available, refer to the following illustration.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide
Digital Text
Time Zone
Common Interface
System
Language
Audio Language
Subtitle Language
Teletext Language
Preference
➣
Mode
:Custom
Digital
Menu
Equalizer
GuideTS XT
:Off
SRS
Digital
Channel :Off
Auto Volume
Setup
:Off
Internal Mute
Language
Reset
MoveEnter
DTV
button.
Move Enter
MoveEnter
DTV
Now/Next, Full Guide
Move Enter
High, Medium, Low, Opaque
Off, On
Normal, Hard of hearing
PCM, Dolby Digital
Audio Description Off, On
Volume
Disable, Enable
Application Info, CI Menu
Product Information
Signal Information
Software Upgrade
Reset
Return
Return
Return
Move Enter
Return
Return
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
:Off
Subtitle Subtitle Mode

MoveEnter
DTV
Return
Channel
Country
:United Kingdom
Auto Store 
Manual Store 
Edit Favourite Channels 
Channel List 
MoveEnter
DTV





Mode
:Custom 
Guide
Equalizer 
Now
& Next
XT Guide
:Off 
SRS TS
Full
Volume
:Off 
AutoGuide
Scheduled
List
:Off 

Internal Mute
Default
Reset Guide :Full Guide 
Digital Channel
Country
Auto Store
Manual Store
Edit Favourite Channels
Channel List
All, Favourites, Default
Setup
Menu Transparency
Change PIN
Parental Lock
Subtitle
Subtitle Mode
Audio Format
Audio Description
TV
Move Enter





Return
Return
Language
Audio Language
Subtitle Language
Teletext Language
Preference 
MoveEnter
Move Enter
Return
Return
Primary Audio Language
Secondary Audio Language
Primary Subtitle Language
Secondary Subtitle Language
Primary Teletext Language
Secondary Teletext Language (Depending On the Country)
The sub-items of the CI Menu may vary depending on the CAM model.
English - 28
BN68-01625A-01Eng.indd 28
2008-08-19 �� 9:39:18
Updating the Channel List Automatically
You can update the channel list when the broadcaster adds new Services or if you
move the TV to a new location.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER
button.
3. Press the ENTER button again, to select "Country".
4. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER
button to confirm your choice.
➣ Even though you have changed the country setting in this menu, the country setting
for Analogue TV is not changed. (Refer to page 11)
5. Press the ▲ or ▼ button again, to select "Auto Store".
Press the ENTER button.
➣ When it has finished, the number of scanned services will be displayed.
➣ The existing favourite channel list will not be deleted when the channel list is
updated.
➣ To stop the scan before it has finished, press the ENTER button with "STOP"
selected.
6. Press the EXIT button to exit.
➣ If the signal status is poor, the "No Service found! Check the aerial connection"
message is displayed.
DTV
Channel
Country
:United Kingdom
Auto Store 
Manual Store 
Edit Favourite Channels 
Channel List 
DTV

Mode
Auto:Custom
Store
Equalizer 
:Off 
SRS TS XT
Volume
:Off
Auto
Scanning
for digital
services... 
:Off 
Internal Mute
35%
Reset
Move Enter
Return
Services found: 24 Channel: 38
Stop
MoveEnter
Return
Return
Updating the Channel List Manually
You can specify the channel for a fast channel search.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER
button.
3. Press the ▲ or ▼ button to select "Manual Store", then press the ENTER button.
4. Press the ▲ or ▼ button to select the required option, then press the ENTER
button.
➣ − Channel : Channel "5" to "69" in sequence are displayed. (depending on the country)
− Frequency : The frequency available in the Channel group is displayed.
− Bandwidth: The available bandwidths are 7 and 8 MHz.
➣ Press the red button to start the scan for digital services.
When it has finished, channels are updated in the channel list.
5. When it has finished, the number of scanned services will be displayed.
6. Press the EXIT button to exit.
DTV
Manual Store
Channel
▲
Frequency
5
177500
Bandwidth
KHz
7
MHz
▼
Search
Adjust
Return
English - 29
BN68-01625A-01Eng.indd 29
2008-08-19 �� 9:39:19
Editing Your Favourite Channels
P
You can edit your favourite channels using the four colour buttons.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Edit Favourite Channels", then press the ENTER
button.
4. Press the red button to display all currently stored channels.
5. Press the ▲ or ▼ button to select a channel you want.
Press the ENTER button.
➣ A "" icon is shown next to the selected channel and the channel will be added to
the favourite channel list.
➣ • To undo, press the ENTER button again.
• Select All: Select all channels currently displayed.
• Select None: Deselect all selected channels.
• Preview: Displays (a) currently selected channel(s).
➣ The Favourite Channels settings have been completed.
6. Press the EXIT button to exit.
DTV
Edit Favourite Channels
(no channels)
MoveEnter
Add
Channels
DTV
Edit Favourite Channels
5
2
5
7
15
16
6
BBC TWO
Five
BBC THREE
abc1
QVC
MoveEnter
♦ Add
You can use this function when one or more favourite channels have been selected.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Edit Favourite Channels", then press the ENTER
button.
4. Press the red button in the "Edit Favourite Channels" menu.
To add more channels, refer to the step 5 on the previous description.
5.If you want to check the channel to be stored, press RETURN button.
Press the EXIT button to exit.
➣ • To add all channels to the favourite channel list, press the red button.
• To remove all channels, press the green button.
• Preview : Displays (a) currently selected channel(s).
• Press the CH LIST button to display the favourite channel manager.
Return
Return
DTV
Select All
Select None
Move
Select
P
Return
Preview
Return
Edit Favourite Channels
2
BBC TWO
★
7
BBC THREE
★
15
abc1
★
MoveEnter
Return
Add
Renumber
Preview
Delete
Move
DTV
Return
Edit Favourite Channels
5
2
5
7
15
16
6
BBC TWO
Five
BBC THREE
abc1
QVC
★
★
★
MoveEnter
Select All
Select None
Return
Preview
Move
Return
Select
P
♦ Renumber (depending on the country)
DTV
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Edit Favourite Channels", then press the ENTER
button.
4. Select the required channel using the ▲ or ▼ button.
5. Press the green button.
➣ The space for entering the number is a blank.
6.Enter the new channel number. Press ENTER button to store or RETURN button to
cancel.
Edit Favourite Channels
2
BBC TWO
★
--15
BBC THREE
★
abc1
★
MoveEnter
Edit
Return
Return
Confirm
➣
➣
Press the ◄ button to delete an entered digit.
If you enter a number already assigned to another channel, the number is assigned
to the selected channel and the previous number assigned to the selected channel is
assigned to the other channel. That is, the two numbers are exchanged.
➣ The Favourite Channels are automatically sorted in ascending order of channel
numbers.
7. Press the EXIT button to exit.
English - 30
BN68-01625A-01Eng.indd 30
2008-08-19 �� 9:39:20
P
♦ Preview
1. In the "Edit Favourite Channels" menu, select the channel to be previewed by pressing
the ▲ or ▼ button.
2. Press the yellow button.
➣ The selected channel is displayed on the screen.
DTV
Edit Favourite Channels
2
BBC TWO
★
7
BBC THREE
★
15
abc1
★
Add
Renumber
Move
Preview
Delete
Return
P
♦ Delete
1. In the "Edit Favourite Channels" menu, select the channel to be deleted from the
favourite channels list by pressing the ▲ or ▼ button.
2. Press the blue button.
➣ The selected channel and number will be deleted.
➣ To add a deleted channel back in to the favourite channel list, see "Add" on page
30.
DTV
Edit Favourite Channels
2
BBC TWO
★
7
BBC THREE
★
Add
Renumber
Move
Preview
Delete
Return
P
Selecting Channel List
You can exclude the channels you have chosen from the channels you have scanned.
When you scan through the stored channels, those you have chosen to skip are not
displayed. All channels that you do not specifically choose to skip are displayed
during scanning.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Channel List".
Press the ENTER button.
4. Press the ▲ or ▼ button to select "All", "Favourites" or "Default".
Press the ENTER button.
5.Press the yellow button to toggle between your favourite channels and all channels.
➣ Your favourite channels are only displayed if they were previously set in the "Editing
Your Favourite Channels" menu (refer to page 30).
6. Press the red or green button to display the previous or next channel List page.
7. Press the ▲ or ▼ button to select a channel to be tuned.
Press the ENTER button.
➣ The channel number, name and an icon are displayed in the top left corner while
changing the channel. The channel number and name are displayed if the channel is
one of the all channels, and a  icon if the channel is one of the favourite channels.
8. Press the blue button to toggle between your "TV", "Radio", "Data/Other" and "All".
9. Press the CH LIST button to exit from the channel List.
Test Card M' v2.0
1
3
4
5
6
15
16
17
Test Card M' v2.0
Vida003b
Vida004b
vida005b
vida006b
Ch 15
QVC
UKTV Gold
Previous Page
Move
Channel List
23
25
26
27
28
15
33
55
bid-up.tv
TCM
UKTV Style
Discovery
DiscoveryH&L
Cartoon Nwk
Boomerang
Ttext Holidays
Next/Page
Watch
All Channels-All
1/2
60 Television X
70 BBC Radio 1
72 BBC Radio 2
73 BBC Radio 3
74 BBC Radio 4
84 heat
91 MOJO
800 ARD-MHP-Data
6 More
Favourites
TV
Return
It can be displayed simply by
pressing the CH LIST button.
English - 31
BN68-01625A-01Eng.indd 31
2008-08-19 �� 9:39:21
P
Displaying Programme Information
While viewing a channel, additional information about the current programme may be
displayed.
1. While viewing a programme, press the INFO button.
➣ The programme information is displayed.
2. To exit from banner information, press the INFO button.
➣ The information is displayed:
− Parental Rating
− Video Type: SD, HD, Radio
− Audio Type: Mono, Stereo, Dual, Dolby Digital
− Existence of Teletext or DVB Subtitle
− Audio Language
14:30 Sat 1 Sep
AII Channels A
1 AFDO,16:9
14:30~14:33
AFDO 16:9
No Block
Contains video with AFD O; coded frame
SD
is 16:9
Stereo
Subtitle
English
MoveEnter
Return
Exit
Viewing the EPG (Electronic Programme Guide) Information
The EPG (Electronic Programme Guide) information is provided by the broadcasters.
Programme entries may appear blank or out of date as a result of the information
broadcast on a given channel. The display will dynamically update as soon as new
information becomes available.
Now & Next Guide
13:28 Wed 16 Feb
27 Discovery
Extreme Machines: Armoured Cars
All Channels
INFO
Now
♦ Now & Next Guide
For the six channels indicated in the left-hand column, displays the Current
programme and the Next programme information.
♦ Full Guide
Displays the programme information as time ordered One hour segments. Two
hours of programme information is displayed which may be scrolled forwards or
backwards in time.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ENTER button, to select "Guide".
3. Press the ▲ or ▼ button to select "Now & Next Guide" or "Full Guide".
Press the ENTER button.
➣ You can also display the guide menu simply by pressing the GUIDE button.
4.
To...
Then...
Watch a programme in the EPG list
• Select a programme by pressing
the ▲, ▼, ◄, ► button.
• Press the ENTER
Watch
Full Guide Next
Favourites Exit
Full Guide
13:28 Wed 16 Feb
27 Discovery
Extreme Machines: Armoured Cars
INFO
Today
Watch
Now/Next
13:00
Favourites 14:00
-24Hours
+24Hours
Exit
P
button.
If
the next programme is selected, it is scheduled with the clock icon displayed. If the
ENTER
button is pressed again, the scheduling is cancelled with the clock icon gone.
For details about scheduling programmes, refer to the next page.
View programme information
➣
➣
• Select a programme of your choice by
pressing the ▲, ▼, ◄, ► button.
• Press the INFO button when the
programme of your choice is highlighted.
Toggle between the "Now & Next Guide" or
"Full Guide"
• Press the red button repeatedly.
Display the "Favourites" and the "All
Channels" list
• Press the green button repeatedly.
Scrolls backwards quickly (24 hours).
• Press the yellow button repeatedly.
Scrolls forward quickly (24 hours).
• Press the blue button repeatedly.
Exit the guide
• Press the EXIT button.
The programme title is on the upper part of the screen center. Please click on INFO button for the detailed information. Channel
Number, Running Time, Status Bar, Parental Level, Video Quality Information(HD/SD), Sound Modes, Subtitle or Teletext,
Languages of Subtitle or Teletext, and brief summary of the highlighted programme are included on the detailed information.
"..." will be appeared if the summary is long.
Six channels are displayed. To scroll between channels, move to a channel using the ▲ or ▼ button. To display page by page,
use the P or P button.
English - 32
BN68-01625A-01Eng.indd 32
2008-08-19 �� 9:39:21
Using the Scheduled List
P
If you make a scheduled viewing list of programs you may like to see, the channel will
be automatically switched to the scheduled programme at the scheduled time even if
you are watching another programme.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ENTER button, to select "Guide".
3. Press the ▲ or ▼ button to select "Scheduled List", then press the ENTER button.
4. Press the red button.
The channel will be switched to the scheduled programme.
5.Press the ENTER button to select an item and adjust with the ▲ or ▼ button .
➣ You can also set hour and minute by pressing the number buttons on the remote control.
• Channel: Set the channel.
• Time: Set the time.
• Date: Set Year, Month and Day.
• Frequency: Set the frequency. ("Once", "Daily", or "Weekly")
6. After setting the schedule, Press the red button.
7. Press the EXIT button to exit.
➣ • Save: Save the adjusted schedule.
• Cancel: Cancel the adjusted schedule.
• Add Programme: Add a new schedule.
• Edit: Readjust the selected schedule.
• Delete: Delete the selected schedule.
DTV
Scheduled List
(No programmes)
Add Programme
Return
P
DTV
Scheduled List
Tuesday 22 Apr
15:30 ~ 16:00
Once
801 RaiTre
Add Programme
Move
DTV
Edit
Delete
Return
Scheduled List
Channel
802 RaiUno
Time
15 : 20 to -- : --
Date
Tue 22 Apr 2008
Frequency
Once
Save
Adjust
Cancel
Move
Return
Setting the Default Guide
You can preset the default guide style.
DTV
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ENTER button, to select "Guide".
3.Press the ▲ or ▼ button to select "Default Guide", then press the ENTER button.
4. Select "Now/Next" or "Full Guide" using the ▲ or ▼ button, and press the ENTER
button.
5. Press the EXIT button to exit.
Guide
Now & Next Guide
Full Guide
Scheduled List
Default Guide :Full
Guide
Now/Next
Full Guide
MoveEnterP
Move
Enter
Return
Return
You can select these options
by simply pressing the GUIDE
button on the remote control.
English - 33
BN68-01625A-01Eng.indd 33
2008-08-19 �� 9:39:22
Viewing All Channels and Favourite Channels
In the EPG menu, you can display all channels or favourite channels.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ENTER button again, to select "Guide".
3. Select the your required guide ("Now & Next Guide" or "Full Guide") by pressing the
▲ or ▼ button.
4. Press the ENTER button.
5. Press the green button.
All the channel lists and the Favourite Channel lists will be toggled.
6.Select a programme of your choice by pressing the ▲, ▼, ◄, or ► button.
7. Press the INFO button to display information about the highlighted programme.
8. When the Edit Favourite Channels list has not been set up:
• "The favourites list is empty.
Would you like to choose your favourites now?" message is displayed.
• Select "Yes".
The "Edit Favourite Channels" menu is displayed.
If you select "No", all channels will remain unchanged.
• To edit the favourite channels, refer to page 30 for more details.
9 . Press the EXIT button to exit.
➣ "All Channels" is the list of channels that have been scanned by the channel list update.
All channels are displayed in the all channel mode.
➣ "Favourites" (favourite channels) is the list of channels that has been set in the "Edit Favourite
Channels" menu (refer to page 30).
Now & Next Guide
13:28 Wed 16 Feb
27 Discovery
Extreme Machines: Armoured Cars
P
All Channels
INFO
Now
Watch
Next
Full Guide Favourites Exit
Full Guide
13:28 Wed 16 Feb
27 Discovery
Extreme Machines: Armoured Cars
INFO
The favourites list is empty. Would you like to
choose your favourites now?
Today
Yes
Watch
Now/Next
Favourites No
-24Hours
+24Hours
Exit
Adjusting the Menu Transparency
You can set the Transparency of the menu.
DTV
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Menu Transparency" then press the ENTER
button.
4. Select the required option ("High", "Medium", "Low", or "Opaque") by pressing the
▲ or ▼ button, and press the ENTER button to change the setting.
5. Press the EXIT button to exit.
Setup
Menu Transparency :Medium
High
Change PIN
Medium
Parental Lock
Low
Subtitle :On
Opaque
Subtitle Mode 
Move
Enter
Return
English - 34
BN68-01625A-01Eng.indd 34
2008-08-19 �� 9:39:22
Setting up the Parental Lock
This feature allows you to prevent unauthorized users, such as children, from
watching unsuitable programmes by a 4-digit PIN (Personal Identification Number)
code that is defined by the user. The on-screen menu will instruct you to assign a PIN
code (you can change it later, if necessary).
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Parental Lock", then press the ENTER button.
4. The "Enter PIN" is displayed.
5. Enter your current 4-digit PIN code by using the numeric buttons (0~9).
➣ The default PIN code for a new TV set is 0000.
➣ If you enter an invalid PIN code,the "Invalid PIN code. Please try again." message is
displayed.
6. Press the ENTER button.
7. Press the ▲ or ▼ button to select the age rating you want to lock out.
Press the ENTER button.
DTV
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
:Off
Subtitle Subtitle Mode

MoveEnter
Move
DTV
Return
Enter
Return
Parental Lock
Enter PIN
Enter PIN
DTV
♦ Change PIN
DTV
Return
Parental Lock
▲
Parental Rating: No Block
No
Block
No Block
3
4
5
6
7
MoveEnter▼
Return
Move
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Change PIN", then press the ENTER button.
➣ The "Enter PIN" is displayed.
4. Enter your current 4-digit PIN code by using the numeric buttons (0~9).
➣ The “Enter New PIN” is displayed.
5. Enter your new PIN code by using the numeric buttons (0~9)
➣ The "Confirm New PIN" is displayed.
6. Re-enter your new PIN code to confirm by using the numeric buttons (0~9).
➣ The "Your PIN code has been changed successfully" message is displayed.
7. Press the ENTER button.
8. Press the EXIT button to exit.
➣ If you forget the PIN code, press the remote control buttons in the following
sequence, which resets the PIN to 0-0-0-0:POWER (Off), MUTE, 8, 2, 4, POWER
(On).





Enter
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
:Off
Subtitle Subtitle Mode

MoveEnter
Move
DTV
Return
Enter





Return
Return
Change PIN
Confirm New PIN
Your PIN code has been changed successfully.
OK
Enter PIN
Return
English - 35
BN68-01625A-01Eng.indd 35
2008-08-19 �� 9:39:23
P
Setting the Subtitle
You can activate and deactivate the subtitles.
DTV
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Subtitle ", then press the ENTER button.
4. Select "On" by pressing the ▲ or ▼ button. Press the ENTER button.
5. Press the EXIT button to exit.
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
Subtitle :On
Off
Subtitle Mode :Normal
On

MoveEnter
Move
Return
Enter
Return
You can select these options simply by pressing the SUBT. button on the remote control.
Setting the Subtitle Mode
Use this menu to set the Subtitle Mode. "Normal" under the menu is the basic subtitle
and "Hard of hearing" is the subtitle for a hearing-impaired person.
DTV
1. P
ress the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3.Press the ▲ or ▼ button to select "Subtitle Mode", then press the ENTER button.
4. Press the ▲ or ▼ button to select "Normal" or "Hard of hearing". Press the ENTER
button.
5. Press the EXIT button to exit.
➣ If the programme you are watching does not support the "Hard of hearing" function,
"Normal" automatically activates even though "Hard of hearing" mode is selected.
Setup
Menu Transparency :Medium
Change PIN
Parental Lock
Subtitle :On
Subtitle Mode :Normal
Normal

Hard of hearing
MoveEnter
Move
Return
Enter
Return
Selecting the Audio Format
You can only hear Dolby Digital sound through the audio receiver connected through
an optical cable. You can only hear PCM sound through the main speaker.
When sound is emitted from both the main speaker and the audio receiver, a sound
echo may occur due to the decoding speed difference between the main speaker and
the audio receiver. In this case, use the internal mute function.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Audio Format", then press the ENTER button.
4. Press the ▲ or ▼ button to select "PCM" or "Dolby Digital". Press the ENTER button.
5. Press the EXIT button to exit.
➣ The Audio Format appears according to the broadcasting signal.
Dolby digital sound is only available when the TV is connected with an external speaker
using an optical cable.
DTV
Setup

: PCM
Audio Format
Audio Description
: Enable
Digital Text Time Zone
Common Interfece

Move
Enter



Return
English - 36
BN68-01625A-01Eng.indd 36
2008-08-19 �� 9:39:24
Selecting the Audio Description
This is an auxiliary audio function that provides an additional audio track for visually
challenged persons. This function handles the Audio Stream for the AD (Audio
Description), when it is sent along with the Main audio from the broadcaster. Users can
turn the Audio Description On or Off and control the volume.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2.Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3.Press the ▲ or ▼ button to select "Audio Description", then press the ENTER button.
4. Press the ▲ or ▼ button to select "On", then press the ENTER button.
5. Press the ▲ or ▼ button to select "Volume", then press the ENTER button.
➣ "Volume" is active when "Audio Description" is set to "On".
6. Press the ◄ or ► button until you reach the optimal setting.
Press the ENTER button.
7. Press the EXIT button to exit.
DTV
Setup

: PCM
Audio Format
Audio Description
: Enable
Digital Text Time Zone
Common Interfece

Move
DTV
Return
Audio Description
Audio Description: On
Off
100
Volume
On
Move
DTV
Enter



Enter
Return
Audio Description
Audio Description: On
100
Volume
Move
Enter
Return
Selecting the Digital Text (UK only)
If the programme is broadcast with digital text, this feature is enabled.
DTV
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Digital Text", then press the ENTER button.
4. Press the ▲ or ▼ button to select "Disable" or "Enable". Press the ENTER button.
5. Press the EXIT button to exit.
➣ MHEG(Multimedia and Hypermedia Information Coding Experts Group) An International
standard for data encoding systems used in multimedia and hypermedia. This is at a higher
level than the MPEG system which includes data-linking hypermedia such as still images,
character service, animation, graphic and video files as well as multimedia data. MHEG is
user runtime interaction technology and is being applied to various fields including VOD
(Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, teleconferencing, digital libraries and network games.
Setup

: PCM
Audio Format
Audio Description
Digital Text : Enable
Disable
Time Zone
Enable
Common Interfece

Move
Enter
Return
Selecting the Time Zone (Spain only)
Select the local time zone.
DTV
1. P
ress the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Time Zone", then press the ENTER button.
4. Select the time zone where you locate by pressing the ▲ or ▼ button.
Press the ENTER button.
➣ The following options are available
The Iberian Peninsula and Balearic Islands - Canary Islands
5. Press the EXIT button to exit.
Setup

: PCM
Audio Format
Audio Description
: Enable
Digital Text Time Zone
Common Interfece

Move
DTV
Enter



Return
Time Zone
The Iberian Peninsula and Balearic Islands
Canary Islands
Adjust
Enter
Return
English - 37
BN68-01625A-01Eng.indd 37
2008-08-19 �� 9:39:24
Viewing Product Information
You can view your product information. For service or repair, please contact a
Samsung approved dealer.
DTV
Product Information
Software Version: T-PERLDEUC-0205
Firmware Version: T-EMMA2DEUB-0106
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "System", then press the ENTER button.
4. Press the ENTER button again, to select "Product Information".
➣ The Product Information menu is selected.
- Software Version, Firmware Version
5. Press the EXIT button to exit.
Return
Checking the Signal Information
You can get information about the signal status.
DTV
Signal Information
Service: ?
Service ID:0000
Multiplex: ? (TSID 0000, ONID 0000)
Network: ? (ID 0000)
Bit error level:
10
Signal Strength: 0
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "System", then press the ENTER button.
4. Press the ▲ or ▼ button to select "Signal Information", then press the ENTER button.
5. Press the EXIT button to exit.
➣ If the signal status is poor, the "No signal." message is displayed.
MoveEnter
Return
Return
Upgrading the Software
To keep your product up-to-date with new Digital Television features then software
upgrades are periodically broadcast as part of the normal Television signal.
It will automatically detect these signals and display the software upgrade banner. You
are given the option to install the upgrade.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "System", then press the ENTER button.
4. Press the ▲ or ▼ button to select "Software Upgrade", then press the ENTER button.
5.Press the ▲ or ▼ button to select “Software Information”, “Manual Upgrade” or “Standby Mode
upgrade”.
Press the ENTER button.
♦ Software Information
Press the ENTER button, then the current software version is shown. To display the
software version information, press the ENTER button again.
To switch to an alternative version, press the red button.
Press the blue button to reset, activate the upgrade and restart.
♦ Manual Upgrade
Press the ENTER button to search for new software from the currently broadcasting
channels.
♦ Standby Mode Upgrade: On / Off
Press the ENTER button. To continue software upgrade with master power on,
Select On by pressing the ▲ or ▼ button. 45 minutes after entering standby mode, a
manual upgrade is automatically conducted. Since the power of the unit is turned on
internally, the screen may be on slightly for the LCD product. This phenomenon may
continue for more than 1 hour until the software upgrade is completed.
DTV
System
Product Information
Signal Information
Software Upgrade
Reset
Move
DTV
Enter




Return
Software Upgrade
Software Information
Manual Upgrade
Standby Mode upgrade : On
Move
Enter



Return
6. Press the EXIT button to exit.
English - 38
BN68-01625A-01Eng.indd 38
2008-08-19 �� 9:39:25
Viewing Common Interface
This contains information on CAM inserted in the CI slot and displays it.
DTV
Application Info
Type : CA
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Common Interface", then press the ENTER button.
4. Press the ENTER button to display the information for your application.
5. Press the EXIT button to exit.
➣ The Application Info inserting is about the CI CARD.
You can install the CAM anytime whether the TV is ON or OFF.
1. Purchase the CI CAM module by visiting your nearest dealer or by phone.
2. Insert the CI CARD into the CAM in the direction of the arrow until it fits.
3. Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel
with the slot.)
4. Check if you can see a picture on a scrambled signal channel.
Manufacturer : Channel Plus
Info : Top Up TV
Return
Selecting the CI (Common Interface) Menu
This enables the user to select from the CAM-provided menu.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Common Interface", then press the ENTER button.
4. Select to "CI Menu" by pressing the ▲ or ▼ button, and press the ENTER button.
5. Select the required option by pressing the ▲ or ▼ button, and press the ENTER
button.
6. Press the EXIT button to exit.
➣ Select the CI Menu based on the menu PC Card.
CI Menu
Main menu
Module information
Smart card information
Language
Software Download
Press OK to select, or Exit to quit
Move
Enter
Exit
Resetting
You can reset the values stored to the factory default values.
➣ The Reset operation deletes all channel information and user preferences returning
all values to their default factory state.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
3. Press the ▲ or ▼ button to select "System", then press the ENTER button.
4. Press the ▲ or ▼ button to select "Reset", then press the ENTER button.
5. The "Enter PIN" screen will appear.
6. Enter your current 4-digit PIN code by using the numeric buttons (0~9).
➣ The warning message is displayed. All values will be reset by pressing the coloured
buttons (red, green, yellow, and blue) in turn.
7. Press the EXIT button to exit.
DTV
Reset
Enter PIN
Enter PIN
DTV
Return
Reset
WARNING: All channel settings and user preferences will be
lost and returned to the factory defaults. It is recommended
that a reset is performed only when serious problems are
experienced.
Return
English - 39
BN68-01625A-01Eng.indd 39
2008-08-19 �� 9:39:25
Selecting the Preferred Language (Subtitle, Audio or Teletext)
You can change the default value for subtitle, audio teletext languages.
Displays the language information for the incoming stream.
1.Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Language", then press the ENTER button.
3. Press the ▲ or ▼ button to select "Audio Language", "Subtitle Language" or "Teletext
Language".
Press the ENTER button.
4. Select a particular language by pressing the ▲ or ▼ button repeatedly.
Press the ENTER button.
➣ English is the default in cases where the selected language is unavailable in the
broadcast.
5. Press the EXIT button to exit.
➣ While viewing a programme, the subtitle can be selected
While viewing a programme, audio languages can be selected.
DTV
Language
Audio Language
Subtitle Language
Teletext Language
Preference 
Move
DTV
Enter
Return
Language
Audio Language
Subtitle Language
Teletext Language
Preference 
Move
Enter
Return
Language
DTV
Audio Language
Subtitle Language
Teletext Language
Preference 
Move
Enter
Return
Preference
This menu consists of 6 sub-menus:
Primary Audio Language, Secondary Audio Language, Primary Subtitle Language,
Secondary Subtitle Language, Primary Teletext Language, Secondary Teletext
Language.
Using this feature, users can select one of the languages.
The language selected here is the default when the user selects a channel.
♦ Press the ▲ or ▼ button to select required menu (Primary Audio Language, Secondary
Audio Language, Primary Subtitle Language, Secondary Subtitle Language, Primary
Teletext Language, Secondary Teletext Language), then press the ENTER button.
The options of the selected menu are displayed.
♦ Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER button to confirm your choice.
➣
➣
DTV
Language
Audio Language
Subtitle Language
Teletext Language
Preference 
MoveEnter
Move
Enter
Return
Return
If you change the language setting, the Subtitle Language, Audio Language, and the
Teletext Language of the Language menu (refer to page 40) are automatically changed
to the selected language.
The Subtitle Language, Audio Language, and the Teletext Language of the Language
menu show a list of languages supported by the current channel and the selection
is highlighted. If you change this language setting, the new selection is only valid for
the current channel. The changed setting does not change the setting of the Primary
Subtitle Language, Primary Audio Language, or the Primary Teletext Language of the
Preference menu.
English - 40
BN68-01625A-01Eng.indd 40
2008-08-19 �� 9:39:26
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC
may be different depending upon your particular version of Windows and your particular video card.
Even if your actual screens look different, the same, basic set-up information will apply in almost all
cases. (If not, contact your computer manufacturer or Samsung Dealer.)
1. First, click on "Control Panel" on the Windows start menu.
2. When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will
appear.
3.When the control panel window appears, click on "Display" and a display dialog-box will appear.
4. Navigate to the "Settings" tab on the display dialog-box.
The correct size setting (resolution): Optimum- 1920 X 1080
If a vertical-frequency option exists on your display settings dialog box, the correct value is "60" or "60 Hz".
Otherwise, just click "OK" and exit the dialog box.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are
recommended.
➣
➣
➣
➣
➣
➣
➣
D-Sub Input
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
IBM
640 x 350
720 x 400
31.469
31.469
70.086
70.087
25.175
28.322
+/-/+
VESA
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1360 x 768
1600 x 1200
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
60.023
63.981
79.976
47.712
75.000
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
75.029
60.020
75.025
60.015
60.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
135.000
85.500
162.000
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
+/+
CVT
1920 x 1080RB
66.587
59.934
138.500
+/-
Mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency (MHz)
Sync Polarity
(H/V)
VESA
640 x 480
800 x 600
1024 x 768
1280 x 1024
1360 x 768
1600 x 1200
31.469
37.879
48.363
63.981
47.712
75.000
59.940
60.317
60.004
60.020
60.015
60.000
25.175
40.000
65.000
108.000
85.500
162.000
-/+/+
-/+/+
+/+
+/+
CEA
1920 x 1080p
67.500
60.000
148.500
+/+
HDMI/DVI Input
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080 or 1600x1200).
English - 41
BN68-01625A-01Eng.indd 41
2008-08-19 �� 9:39:26
Setting up the TV with your PC
➣ Press the SOURCE button to select PC mode.
1. Press the MENU button to display the menu.
Press the ENTER button, to select "Picture".
2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER
button.
3. When you are satisfied with your setting, press the ENTER button.
4. Press the EXIT button to exit.
TV
Picture
Mode
:Standard 
Backlight7
Contrast 95
Brightness 45
Sharpness 50
Auto Adjustment 
Screen Adjustment 
Detailed Settings 
sMore
♦
Auto Adjustment
Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video
signal. The values of fine, coarse and position are adjusted automatically.
Easy Setting
1. Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Auto Adjustment”, then press the ENTER
button.
Move Screen Adjustment:
Coarse/Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If
the noise is not removed by Fine-tuning alone, then adjust the frequency as best as
possible (coarse) and Fine-tune again. After the noise has been reduced, readjust the
picture so that it is aligned on the center of screen.
Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER button.
Press the ◄ or ► button to adjust the screen quality.
Press the ENTER button.
Position
Adjust the PC’s screen positioning if it does not fit the TV screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Press the ENTER button.
Tools
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving PIP
Auto Adjustment
TV
: Standard
: Custom
:Off
:Off
:Off
Enter
e Exit
Screen Adjustment
Coarse50
Fine93
Position 
Image Reset 
Move TV
Enter
Return
Position
Image Reset
You can replace all image settings with the factory default values.
Return
Auto Adjustment in progress
Please wait.
Move ♦
Enter
TV
Move Enter
Return
Screen Adjustment
Coarse50
Fine93
Position 
Image Reset 
Move Enter
Return
English - 42
BN68-01625A-01Eng.indd 42
2008-08-19 �� 9:39:27
Using the WISELINK Function
This function enables you to view and listen to photo (JPEG) and audio files (MP3)
saved on a USB Mass Storage Class (MSC) device.
Press the POWER button on the remote control.
Connect a USB device containing JPEG and/or MP3 files to the WISELINK jack (USB
jack) on the side of the TV.
If you enter the WISELINK mode with no USB device
connected the message “There is no device connected” will appear. In this case, insert
the USB device, exit the screen by pressing the W.LINK button on the remote control
and enter the WISELINK screen again.
TV Side Panel
USB Drive
Only alphanumeric characters must be used as a folder name or filename (photo,
music).
The file system only supports FAT16/32 (The NTFS file system is not supported)
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
Wiselink only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class
Bulk-Only Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not
supported.)
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.SAMSUNG is not
responsible for any data file damage or data loss.
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB
Compatibility problem.
Only MP3 and JPEG file formats are supported.
The Wiselink mp3 format only supports music files with a high sampling frequency (32 kHz, 44.1 kHz or 48 kHz).
We recommend the sequential jpeg format.
Do not disconnect the USB device while it is loading.
MTP (Media Transfer Protocol) is not supported.
The playing duration of an mp3 file may be displayed as ‘00:00:00’ if its playing time information is not found at the start of the file.
The higher the resolution of the image, the longer it takes to display on the screen.
The Photo or Music List displays up to 300 folders or files.
Loading may take some time depending on the size of the file.
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM)
is a technology that supports the creation of content, the distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal
copying of contents, as well as managing billings and settlements.
English - 43
BN68-01625A-01Eng.indd 43
2008-08-19 �� 9:39:27
Using the WISELINK Menu
1. Press the MENU button. Press the ▲ or ▼ button to select “Input”, then press the
ENTER button.
2. Press the ▲ or ▼ button to select “WISELINK”, then press the ENTER button.
Input
TV
Source List
: TV ►
Edit Name ►
Anynet+ (HDMI-CEC)
WISELINK
Move 3. Press the ▲ or ▼ button to select the corresponding USB Memory Device, then press
the ENTER button.
➣ The "WISELINK" menu differs depending on the USB Memory Device connected to
TV.
➣ Some devices may not be supported due to compatibility problems.
Enter
Return
STORAGE DEVICE
STORAGE DEVICE
SUM
STORAGE DEVICE
STORAGE DEVICE
4. Press the ◄ or ► button to move to an icon, then press the ENTER button.
➣ To exit "WISELINK" mode, press the W.LINK button on the remote control.
Move
Enter
Exit
Photo
SUM
861MB/994MBFree
Photo
Music
Move
P Setup
Enter
Return
Press the W.LINK button on the remote control to display a WISELINK menu.
Using the Remote Control Button in WISELINK Menu
Button
Operations
▲/▼/◄/►
Move the cursor and select an item.
ENTER
Select the currently selected item.
Play the Slide Show or MP3 file.
Pause the Slide Show or MP3 file.
RETURN
INFO
Return to the previous menu.
Run various functions from the Photo and Music menus.
Stop the current slide show or MP3 file.
Page Up or Down (file list item)
EXIT
Stop the current function and return to the previous high-level menu.
English - 44
BN68-01625A-01Eng.indd 44
2008-08-19 �� 9:39:35
Using the PHOTO (JPEG) List
This menu shows JPEG files and folders saved on an USB memory device.
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 44)
2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. The
saved file information is displayed as a folder or file.
3. Press the ▲, ▼, ◄ and ► buttons to select a file.
• Pressing the ENTER button over a photo icon shows the currently selected photo in
full screen.
• Pressing the ENTER button over a folder icon shows the JPEG files included in the
folder.
To exit "WISELINK" mode, press the W.LINK button on the remote control.
➣ Moving to a photo may take a few seconds to load the file. At this point, the
icon will appear at the top left of the screen.
➣ It takes time to show JPEG files as Thumbnail images.
➣ This menu only shows files whose file extension is jpg. Files of other formats such
as bmp or tiff will not be displayed.
➣ The files are displayed on a page. 15 thumbnail photos are displayed per page.
➣ The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.
➣ Certain types of USB Digital camera and audio devices may not be compatible with
this TV.
➣ Folders are displayed first and they are followed by all JPEG files in the current
folder.
➣ The folders and JPEG files appear in the order of the time they were saved to the
USB memory device.
➣ If the photo is displayed in full screen, you can zoom in and out or rotate the photo
on the screen.
➣ While a full screen is displayed, ◄ or ► button will let you see another photo image
in the same folder.
➣ Press the button when a Photo icon is selected to start a Slide Show.
➣ Photos without EXIF information may not be displayed as thumbnail images in the
PHOTO LIST depending on the picture quality and resolution.
Photo
SUM
861MB/994MBFree
Photo
Music
Setup
Move
Enter
Return
1/10 Page
Photo
580*440
47KB
Jun 1,2008
3/23
Upper Folder Forder1
File 4
File 5
Photo 0001
Photo 0001
None
File 6
File 7
File 8
SUM
895MB/993MB
File 9
Select
File 10
Move
File 11
Enter
File 12
File 13
Option
Return
INFO
Viewing a Slide Show
4. Press the INFO button to display the option("Start Slide Show", "Select All").
5. Press the ▲ or ▼ button to select “Start Slide Show” then press the ENTER button.
➣ During the slide show, files are displayed in order from the currently shown file.
➣ MP3 files can be automatically played during the Slide Show if the Default
Background Music is set to On. To enable this function, MP3 files and other photo
files must be located in the same folder on the USB Memory Device.
6. Press the INFO button during the slide show to set the following options ("Slide Show
Speed", "Background Music", "Background Music Setting", "List"). Press the ▲ or ▼
button to select the option, then press the ENTER button.
• After setting the option press the ENTER button to make a change.
1/10 Page
Photo
580*440
47KB
Jun 1,2008
3/23
Upper Folder Forder1
File 4
Start
Slide Show
895MB/993MB
Select All
INFO
Exit
File 5
Photo 0001
Photo 0001
None
File 6
File 7
File 8
File 12
File 13
File 9
File 10
File 11
Select
Move
Enter
INFO
Option
Return
Normal
Slide Show Speed Nomal►
Background Music
On ►
Background Music Setting
List
INFO
Exit
English - 45
BN68-01625A-01Eng.indd 45
2008-08-19 �� 9:39:41
Using the Menu in the Photo List
Start Slide Show:
You can start a Slide Show.
1/10 Page
Photo
580*440
47KB
Jun 1,2008
3/23
Select All:
Select all the files in the folder.
Upper Folder Forder1
File 4
Deselect all:
Deselect all the files in the folder.
File 5
Photo 0001
Photo 0001
None
File 6
File 7
File 8
File 12
File 13
Start Slide Show
895MB/993MB
Select
All
File 9
File 10
File 11
Select
Move
Enter
Deselect all
Exit
INFO
Using the Menu during a Slide Show
Slide Show Speed:
Select to control the slide show speed.
Option
INFO
Return
Normal
Press the ▲ or ▼ button to select the required option
("Fast", "Normal", "Slow"), then press the ENTER button.
Fast
Slide Show Speed Nomal
Background Music
Nomal
On ►
Slow
Background Music Setting
List
INFO
Background Music:
Select to choose whether you want to play an MP3 file during a slide show.
Press the ▲ or ▼ button to select the required option ("On", "Off"), then press the ENTER
button.
Exit
On
Slide Show Speed Nomal►
On
Off
Background Music Setting
On
Background Music
List
INFO
Background Music Setting:
While the slide show is in progress, MP3 files and folders under the same directory are
displayed.
Exit
Background Music Setting
Choose files for background music
Upper Folder
Press the ▲ or ▼ button to select a music file, then press the yellow button.
The ( ) mark appears to the left of the selected music.
Repeat the above operation to select multiple music files.
Press the ENTER button.
➣ If you turn Off the Background Music, even if the Background Music Settings have been
set up, the background music will not be played.
List:
The file information is displayed as a folder or JPEG file. To exit "WISELINK" mode, press the
W.LINK button on the remote control.
➣ When selecting a photo file, the photo file information is displayed on the left side of
the TV screen, such as the resolution, the date modified and the order of the file in the
current directory (e.g. 10th out of 15).
01-001
02-002
03-003
04-004
05-005
◄◄ 1/1 Page ►►
Select Move
Enter
Return
1/10 Page
Photo
580*440
47KB
Jun 1,2008
3/23
Upper Folder Forder1
File 4
File 5
Photo 0001
Photo 0001
None
File 6
File 7
File 8
File 12
File 13
SUM
895MB/993MB
: Folder icon
File 9
File 10
File 11
Select
Move
Enter
INFO
Option
Return
Such as the resolution
: Photo icon
: Move to the previous
folder stage icon
File Size
Date modified
Photo
580*440
47KB
Jun 1,2008
3/23
Order of the file in the
current directory
English - 46
BN68-01625A-01Eng.indd 46
2008-08-19 �� 9:39:43
Using the Option Menu
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 44)
2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. The saved file information is displayed as a
folder or file.
3. Press the ▲, ▼, ◄ and ► button to select a file, then press the ENTER button. Pressing the button over a photo thumbnail
displays the photo in full screen.
4. Press the INFO button to display the option. ("Start Slide Show" , "Zoom", "Rotate", "List")
Start Slide Show:
• Press the ▲ or ▼ button to select “Start Slide Show”, then press the ENTER
You can start a Slide Show.
button.
Start Slide Show
Zoom
Zoom:
• Press the ▲ or ▼ button to select “Zoom”, then press the ENTER button.
• Select the required option by pressing the ▲ or ▼ button, then press the ENTER
button. (X1, X2, X4)
➣ To pan up/down/left/right in the zoomed-in photo, press the INFO button to exit option
menu, then press the ▲, ▼, ◄ and ► buttons.
➣ "Start Slide Show" or "Rotate" is disabled when the "Zoom" option is selected.
➣
X1 ►
Rotate
0►
List
Exit
INFO
X1
Start Slide Show
Zoom
" x1 " : Restore a photo to its original size.
X1
0►
Rotate
" x2 " : Zoom-in to a photo x2.
x1
x2
x4
List
Exit
INFO
" x4" : Zoom-in to a photo x4.
/
/
/
: Move the zoomed-in photo up/down/right/left.
Rotate:
• Press the ▲ or ▼ button to select “Rotate”, then press the ENTER button.
•S
elect the required option by pressing the ▲ or ▼ button, then press the ENTER
(0°, 90°, 180°, 270°)
➣ The rotated file is not saved.
➣ "Start Slide Show" or "Zoom" is disabled when the “Rotate” option is selected.
➣
"0°" : This rotates a photo to its original position
button.
0°
Start Slide Show
Zoom
X1 ►
Rotate
0
"90°" : This rotates a photo by 90 degrees
0
90
List
INFO
Exit
180
270
"180°" : This rotates a photo by 180 degrees
"270°" : This rotates a photo by 270 degrees
English - 47
BN68-01625A-01Eng.indd 47
2008-08-19 �� 9:39:44
Using the MP3 List
This menu shows MP3 files from among the files saved on a USB memory device.
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 44)
2. Press the ◄ or ► button to move to “Music”, then press the ENTER button. The
saved file information is displayed as a folder or file.
3. Press the ▲ or ▼ button to move to an icon, then press the ENTER button.
• Pressing the ENTER button over a musical note icon immediately plays the music file.
• Pressing the ENTER button over a folder icon shows the music files included in the
folder.
• To select a file on the next page, press the
or
button to move to the next page.
4. To select all files or a file, press the INFO button to display the Music menus. Press the
ENTER button to select “Play”, “Repeat Music” or “Select All”.
To exit "WISELINK" mode, press the W.LINK button on the remote control.
➣ The folders and MP3 files appear in the order of the time they were saved to the USB
memory device.
Music
SUM
861MB/994MBFree
Photo
Setup
Move
Enter
006-006
5MB
Jun 1,2008
3/23
Folder 1
Play
INFO
00:04:00
Upper Folder
Select All
Exit
Off ►
001-001
00:04:01
002-002
00:04:28
003-003
00:04:12
004-004
00:05:39
005-005
00:04:30
006-006
00:04:30
007-007
00:03:54
008-008
Select
00:05:25
Move
Enter
Play:
Select to play MP3 files.
: Folder icon
➣
➣
➣
: Music icon
➣
➣
➣
Return
1/10 Page
Music
Repeat Music
Using the Option Menu
Music
Press the
button while playing an MP3 file to pause the file.
button to exit Play mode.
Press the
This menu only shows files with the MP3 file extension. Files with other file extensions
are not displayed, even if they are saved on the same USB device.
The selected file is displayed on the top with its playing time.
+ button on the remote control. To mute the
To adjust the music volume, press the –
sound, press the MUTE button on the remote control.
If the sound is odd when playing MP3 files, exit WISELINK mode and adjust the
“Equalizer” and “SRS TS XT” in the Sound menu. (An over-modulated MP3 file may
cause a sound problem.)
INFO
Option
Return
: Move to the previous
folder stage icon
Repeat Music:
Select to repeatedly play MP3 files in the current folder.
You can select On or Off.
Select All:
Select all the files in the folder.
Deselect all:
Deselect all the files in the folder.
Music function information icon
: When all music files in the folder (or the selected file) are repeated. “Repeat Music” is “On”.
: When all music files in the folder (or the selected file) are played once. “Repeat Music” is “Off”.
/
:W
hen pressing the
: When pressing the
/
button on the remote control while music is playing.
button on the remote control when music is stopped.
English - 48
BN68-01625A-01Eng.indd 48
2008-08-19 �� 9:39:54
Using the Setup Menu
Setup displays the user settings of the WISELINK menu.
1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 44)
2. Press the ◄ or ► button to move to “Setup”, then press the ENTER button.
3. Press the ▲ or ▼ button to select an item you want, then press the ENTER button. (“Slide Show Speed”, “Background
Music”, “Background Music Setting”, “Repeat Music”, “Screen Saver”)
4. Press the ▲ or ▼ button to select the option, then press the ENTER button.
To exit WISELINK mode, press the W.LINK button on the remote control.
Slide Show Speed:
Select to control the slide show speed. You can select “Fast”, “Normal” or “Slow”.
Setup
Slide Show SpeedNormal Fast
Background MusicOn Background Music Setting
Screen Saver
►
1min.
Setup
►
►
Background Music:
Select to determine whether to play an MP3 file during a slide show.You can select Music
“On” or Music “Off”.
Normal
Slow
Repeat Music Off
Move
Enter
Return
Slide Show SpeedNormal
Background MusicOn ►
Off
On
Background Music Setting
Repeat Music Off
►
Screen Saver
►
1min.
Background Music Setting:
Move
Enter
Return
Background Music Setting
While a slide show is in progress, use the "Background Music Setting" to select a music file
to listen to. Select an MP3 file as the background music.
Choose files for background music
Upper Folder
01-001
02-002
03-003
04-004
05-005
◄◄ 1/1 Page ►►
Repeat Music:
Select Move
Enter
Return
Select to determine whether to repeat playing the music when all MP3 files in the current
folder have been played.
Setup
Slide Show SpeedNormal
►
Background MusicOn ►
Background Music Setting
Repeat Music Off
Screen Saver
Screen Saver:
Select to set the waiting time before the screen saver appears.
The screensaver will appear when no button is pressed for 1, 5 or 10 minutes.
1min.
Setup
Move
Off
On
►
Enter
Return
Slide Show SpeedNormal
►
Background MusicOn ►
Background Music Setting
►
Repeat Music Off
Screen Saver
1min. 1min.
5min.
10min.
Move
Enter
Return
English - 49
BN68-01625A-01Eng.indd 49
2008-08-19 �� 9:40:05
What is Anynet+?
Anynet+ is an AV network system that enables an easy-to-use AV interface for users by controlling all connected AV
devices through the Anynet+ menu when Samsung Electronics AV devices are connected.
Connecting Anynet+ Devices
The Anynet+ system supports AV devices supporting Anynet+ only.
Check if there is an Anynet+ mark on the AV device to be connected to the TV.
TV
Anynet+
Device 1
HDMI 1.3
Cable
HDMI 1.3
Cable
TV
Anynet+
Device 3
Anynet+
Device 2
HDMI 1.3
Cable
Anynet+
Device 1
Home Theatre
HDMI 1.3 Cable
Optical Cable
HDMI 1.3 Cable
Anynet+
Device 3
Anynet+ Device 2
HDMI 1.3 Cable
➣
➣
➣
➣
➣
➣
To directly connect to TV
Connect the [HDMI 1], [HDMI 2] or [HDMI 3]
jack on the TV and the HDMI OUT jack of the
corresponding Anynet+ device using the HDMI
cable.
To connect to Home Theater
1. C
onnect the [HDMI 1], [HDMI 2] or [HDMI 3]
jack on the TV and the HDMI OUT jack of the
corresponding Anynet+ device using the HDMI
cable.
2. Connect the HDMI IN jack of the home
theatre and the HDMI OUT jack of the
corresponding Anynet+ device using the
HDMI cable.
HDMI 1.3 Cable
Connect only the optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio Input on the receiver.
Connect only one receiver.
You can listen to 5.1 channel sound through the home theatre’s speakers. Otherwise, you can only listen to 2 channel stereo
sound in other cases. Make sure to connect the Digital Audio IN (Optical) of the home theatre and the TV correctly to listen to
TV sound through the home theatre. However, you cannot listen to sound from the BD recorder that is sent to the home theatre
via the TV in 5.1 channel sound because the TV outputs only 2 channel stereo sound. Please see the manual for the home
theatre.
You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
Anynet+ supports up to 8 AV devices in total.
English - 50
BN68-01625A-01Eng.indd 50
2008-08-19 �� 9:40:05
Setting Up Anynet+
The following settings are to use Anynet+ functions.
Using the Anynet+ Function
Tools
1. Press The TOOLS button. Then Press the ENTER button to select "Anynet+(HDMICEC)".
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2. Press the ENTER button to select "Anynet+ (HDMI-CEC)", then press the ENTER
button.
3. Press the ▲ or ▼ button to select "On", then press the ENTER button.
➣ The "Anynet+ (HDMI-CEC)" function is enabled.
➣ If you select "Off", "Anynet+ (HDMI-CEC)" is disabled.
➣ When the "Anynet+ (HDMI-CEC)" function is disabled, all the Anynet+ related operations
are deactivated.
Anynet+ (HDMI-CEC)
Picture Mode
Sound Mode Sleep Timer SRS TS XT
Energy Saving Dual l-ll Move TV
: Standard
: Custom
:Off
:Off
:Off
:
Mono
Enter
e Exit
P9
View TV
Select Device

Record

Menu on Device

Device Operation

Receiver

:Off
Setup
Move Return

Enter
Setup
Anynet+ (HDMI-CEC)
: Off
Off
Auto Turn Off : Off
On
Searching Connections
Move Enter
Return
Turning an Anynet+ Device Off Automatically when the TV is Turned Off
1. Press the ▲ or ▼ button to select "Auto Turn Off", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Yes", then press the ENTER button.
➣ The Auto turn off function is enabled.
➣ If you select "No", the Auto turn off function is cancelled.
Press the EXIT button to exit.
➣ The Select Device setting of the TV remote control is to be set to TV to use the Anynet+
function.
➣ If you set "Auto Turn Off" to "Yes", connected external devices are also turned off when
the TV is turned off. However, if the device is recording, it may not be turned off.
Setup
Anynet+ (HDMI-CEC)
: On
Auto Turn Off : Off
Searching Connections
Move Enter
No
Yes
Return
English - 51
BN68-01625A-01Eng.indd 51
2008-08-19 �� 9:40:06
Scanning and Switching between Anynet+ Devices
1. Press the TOOLS button.
Then press the ENTER button to select "Anynet+(HDMI-CEC)".
2. Press the ▲ or ▼ button to select "Select Device", then press the ENTER button.
3. Press the ▲ or ▼ button to select to a particular device and press the ENTER button.
It is switched to the selected device.
4. If you cannot find a device you want, press the ▲ or ▼ button to select "Setup", then
press the ENTER button.
5. Press the ▲ or ▼ button to select "Searching Connections", then press the ENTER
button.
The message "Configuring Anynet+ connection..." is displayed. When searching devices
completes, the connected devices are listed in the Anynet+ menu.
➣ Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
➣ The time required to scan for devices is determined by the number of connected
devices.
➣ When the device scan is complete, the number of found devices is not displayed.
➣ Although the TV automatically scans devices when it is turned on using the POWER
button, devices connected when the TV is on or under a specific circumstance are not
displayed in the device list. Therefore select "Searching Connections" menu to search
devices.
➣ If you have selected external input mode by pressing the SOURCE button, you cannot
use the Anynet+ function. Make sure to switch to an Anynet+ device by using the
TOOLS button.
TV
P9
View TV
Select Device

Record

Menu on Device

Device Operation

Receiver

:Off
Setup
Move Return

Enter
Setup
Anynet+ (HDMI-CEC)
: On

Auto Turn Off :

Yes
Searching Connections Move Enter

Return
English - 52
BN68-01625A-01Eng.indd 52
2008-08-19 �� 9:40:06
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver
Setup
Description
Switches from Anynet+ to TV broadcast mode.
Your TV connects to the corresponding device.
Starts a recording. (This menu works only for a device supporting recording.)
Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s title menu appears.
Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control menu of the DVD Recorder
appears.
Sound is output through the receiver.
You can set the environment for using Anynet+.
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Anynet+ Device
Operating Status
After switching to the device, when the menu
of the corresponding device is displayed on
the screen.
Available Buttons
Numeric buttons
▲/▼/◄/►/ENTER buttons
Colour buttons
EXIT button
(Backward search)/
(Forward search)/
(Stop)/
(Play)/
(Pause)
After switching to the device, while playing
a file
Device with built-in Tuner
After switching to the device, when you are
watching a TV programme
P
Audio Device
When Receiver is activated
+ / – button
MUTE button
➣
➣
➣
➣
➣
➣
➣
/
button
The Anynet+ function only works when the remote control is set to TV.
button works only while in the recordable state.
The
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote
control.
The TV remote control may not work under certain conditions. In this case, re-select the Anynet+ device.
The Anynet+ functions don’t operate for the products from other manufacturers.
In Anynet+ mode, the colour buttons may not work properly.
,
operations may differ depending on the device.
The
Recording
You can make a recording of a TV programme using a recorder.
Press the
button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➣ The current TV programme is recorded in the Watching TV status. If you are watching video from another device, the video
from the device is recorded.
➣ You can also record the source streams by selecting "Record" after pressing the TOOLS button.
➣ Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device, refer to its user manual.
English - 53
BN68-01625A-01Eng.indd 53
2008-08-19 �� 9:40:07
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
TV
P9
1. Press the TOOLS button. Then Press the ENTER button to select "Anynet+(HDMIView TV
CEC)".
Select Device

Press the ▲ or ▼ button to select "Receiver", then press the ENTER button.
Record

2. Press the ◄ or ► button to select to "On", then press the ENTER button.
Menu on Device

Now you can listen to sound through the receiver.

Device Operation
3. Press the EXIT button to exit.
Receiver :Off

➣ When the receiver is set to On, you can listen to the TV sound through the 2-channel
Setup

receiver.
Move Enter
Return
➣ If the receiver is exclusively for a home theatre only (supporting audio only), it may not
appear in the device list.
➣ Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work.
➣ In case of a content with copyright problem, listening through the receiver may not properly operate.
➣ If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the power cord or a power
failure), the “TV Speaker” may be set to “Off” when you turn the TV on again. (see page 21)
Check Points before Requesting Service
Symptom
Solution
Anynet+ does not work.
■
■
■
■
■
■
■
■
■
■
I want to start Anynet+.
■
■
I want to exit Anynet+.
■
■
■
The Configuring Anynet+
■
connection message appears
■
on the screen.
The Anynet+ device does
not play.
The connected device is not
displayed.
Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
Connect only one receiver.
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Check whether the TV remote control is in TV mode.
Check whether it is Anynet+ exclusive remote control.
Anynet+ doesn’t work at a certain condition. (Searching channels, Operating WISELINK, Plug & Play,
etc.)
When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or
restart your TV.
Check if the Anynet+ Function of Anynet+ device is set on.
Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is
set to On in the Anynet+ Setup menu.
Press the TV/DTV button on the TV remote control to switch to TV. Then press the TOOLS button to
show the Anynet+ menu and select a menu you want.
Select View TV in Anynet+ menu.
Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.
Press any of P / and PRE-CH such to change to the TV mode. (Note that the channel button
operates only when a tuner-embedded Anynet+ device is not connected.)
You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
Use the remote control when the Anynet+ setting or switching to view mode is complete.
You cannot use the play function when Plug & Play is in progress.
■
■
■
■
■
■
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
Search Anynet+ devices again.
You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not
support Anynet+ functions.
If it is terminated by an abnormal situation such as disconnecting the HDMI 1.3 cable or power cord
or a power failure, please repeat the device scan.
The TV programme cannot be
Check whether the antenna jack on the recording device is properly connected.
recorded.
The TV sound is not output
through the receiver.
Connect the optical cable between TV and the receiver.
English - 54
BN68-01625A-01Eng.indd 54
2008-08-19 �� 9:40:07
Teletext Feature
Most television stations provide written information services via Teletext. The index page of the teletext service gives you
information on how to use the service. In addition, you can select various options to suit your requirements by using the
remote control buttons.
➣
For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or
some pages may not be displayed.
1.TV/DTV(exit)
Exit from the teletext display
26 (index)
Used to display the index (contents) page at any time while you are viewing teletext.
38 (store)
Used to store the teletext pages.
1
44 (size)
Press to display the double-size letters in the upper half of the screen. For lower half
of the screen, press it again. To display normal screen, press it once again.
55 (reveal)
Used to display the hidden text (answers to quiz games, for example). To display
normal screen, press it again.
7
6/ (teletext on/mix)
Press to activate teletext mode after selecting the channel providing the teletext
service. Press it twice to overlap the teletext with the current broadcasting screen.
71 (sub-page)
Used to display the available sub-page.
P
8
9
2
3
0
4
!
00 (mode)
Press to select the teletext mode (LIST/FLOF). If you press it in the LIST mode, it
switches into the List save mode. In the List save mode, you can save teletext page
into list using the 8(store) button.
5
@
!9 (hold)
Used to hold the display on a given page if the selected page is linked with several
secondary pages which follow on automatically. To resume, press it again.
6
82 (page up)
Used to display the next teletext page.
93 (page down)
Used to display the previous teletext page.
#
@7 (cancel)
Used to display the broadcast when searching for a page.
#Colour buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the different topics
covered on a teletext page are colour-coded and can be selected by pressing the
coloured buttons. Press one of them corresponding to the required. The page is
displayed with other coloured information that can be selected in the same way. To
display the previous or next page, press the corresponding coloured button.
➣
You can change teletext pages by pressing the numeric buttons on the remote
control.
P
English - 55
BN68-01625A-01Eng.indd 55
2008-08-19 �� 9:40:07
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
➣
Teletext information is often divided between several pages displayed in sequence, which
can be accessed by:
 Entering the page number
 Selecting a title in a list
 Selecting a coloured heading (FASTEXT system)
➣ Press the TV/DTV button to exit from the teletext display.
P
English - 56
BN68-01625A-01Eng.indd 56
2008-08-19 �� 9:40:07
Troubleshooting: Before Contacting Service Personnel
No sound or picture
♦ Check that the mains lead has been connected to a wall socket.
♦ Check the picture contrast and brightness settings.
♦ Check the volume.
Normal picture but no sound
♦ Check the volume.
♦ Check whether the MUTE button has been pressed on the remote control.
♦ Check if "TV Speaker" is "on"
Screen is black and Logo light
blinks steadily
♦ On your computer check; Power, Signal Cable.
♦ The TV is using its power management system.
♦ Move the computer’s mouse or press any key on the keyboard.
No picture or black and white
picture
♦ Adjust the colour settings.
♦ Check that the broadcast system selected is correct.
Sound and picture
interference
♦ Try to identify the electrical appliance that is affecting the set and move it further away.
♦ Plug your set into a different mains socket.
Blurred or snowy picture,
distorted sound
♦ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
♦ Replace the remote control batteries.
♦ Clean the upper edge of the remote control (transmission window).
♦ Check the battery terminals.
'Check signal cable.'
message is displayed
♦ Check that the signal cable is firmly connected to the PC or video sources.
♦ Check that the PC or video sources are turned on.
On PC mode, 'Not Supported
Mode.' message is displayed
♦ Check the maximum resolution and the frequency of the video adaptor.
♦ Compare these values with the data in the Display Modes.
The damaged picture appears in
the corner of the screen
If "Just Scan" is selected in some external devices, the damaged picture may appear in the
corner of the screen. This symptom is caused by external devices, not TV.
The 'Resets all settings to the
This appears when you press and hold the EXIT button for a while. The product settings are
default values.' message appears. reset to the factory defaults.
The TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
English - 57
BN68-01625A-01Eng.indd 57
2008-08-19 �� 9:40:07
Technical and Environmental Specifications
Model Name
LE46A900
LE52A900
Screen Size (Diagonal)
46 inch
52 inch
PC Resolution
Sound
Output
Dimensions (WxDxH)
With stand
Weight
With stand
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
10W X 2
10W X 2
1157 x 382 x 761 mm
1300 x 382 x 854 mm
52kg
63Kg
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Stand Swivel
(Left / Right)
➣
➣
➣
10 °C to 40 °C (50 °F to 104 °F)
10 % to 80 %, non-condensing
-20 °C to 45 °C (-4 °F to 113 °F)
5 % to 95 %, non-condensing
0˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.
English - 58
BN68-01625A-01Eng.indd 58
2008-08-19 �� 9:40:07
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Comment contacter Samsung dans le monde
Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs
Samsung.
Kontakt zu Samsung
Falls Sie Fragen oder Anregungen zu Samsung-Produkten haben, wenden Sie sich bitte an den Samsung-Kundendienst.
Contact Samsung wereldwijd
Wanneer u suggesties of vragen heeft met betrekking tot Samsung producten, gelieve contact op te nemen met de consumenten
dienst van Samsung.
Contatta SAMSUNG WORLDWIDE
Se avete commenti o domande sui prodotti Samsung, contattate il Servizio Clienti Samsung.
Contacte con SAMSUNG WORLDWIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente
Contacte SAMSUNG GLOBAL
Se tem algumas dúvidas ou comentários sobre os produtos Samsung, contacte por favor a nossa linha de apoio a clientes Samsung.
Country
Customer Care Centre
Web Site
AUSTRIA
BELGIUM
0800-SAMSUNG (726-7864)
02 201 2418
800-726-786 (800 - SAMSUNG)
www.samsung.com/at
www.samsung.com/be
www.samsung.com/cz
CZECH REPUBLIC
Distributor pro Českou republiku:
Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
DENMARK
EIRE
FINLAND
70 70 19 70
0818 717 100
030-6227 515
www.samsung.com/dk
www.samsung.com/ie
www.samsung.com/fi
FRANCE
3260 SAMSUNG (€ 0,15/Min)
08 25 08 65 65 (€ 0,15/Min)
www.samsung.com/fr
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
01805 - SAMSUNG (726-7864) (€ 0,14/Min)
06-80-SAMSUNG (726-7864)
800-SAMSUNG (726-7864)
02 261 03 710
0900-SAMSUNG (726-7864) (€ 0,10/Min)
815-56 480
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.com/lu
www.samsung.com/nl
www.samsung.com/no
POLAND
0 801 801 881
022-607-93-33
www.samsung.com/pl
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
SWITZERLAND
U.K
TURKEY
ESTONIA
LATVIA
LITHUANIA
KAZAHSTAN
KYRGYZSTAN
RUSSIA
TADJIKISTAN
UKRAINE
UZBEKISTAN
80820-SAMSUNG (726-7864)
0800-SAMSUNG (726-7864)
902-1-SAMSU(72678)
0771-400 200
0800-SAMSUNG (726-7864)
0845 SAMSUNG (7267864)
444 77 11
800-7267
8000-7267
8-800-77777
8-10-800-500-55-500
00-800-500-55-500
8-800-555-55-55
8-10-800-500-55-500
8-800-502-0000
8-10-800-500-55-500
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/ch
www.samsung.com/uk
www.samsung.com/tr
www.samsung.ee
www.samsung.com/lv
www.samsung.lt
www.samsung.com/kz_ru
www.samsung.ru
www.samsung.ua
www.samsung.com/kz_ru
BN68-01625A-01
iDTV-W EURO-01L08-Weee.indd 51
2008-08-19 �� 9:59:07
Download PDF

advertising