Samsung | SP-43Q1HE | Samsung SP-43Q1HE Benutzerhandbuch

BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 1
COLOUR
TELEVISION
SP43Q1/47Q1
SP43T8/54T8
SP43W6
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
PICTURE IN PICTURE (PIP)
TELETEXT
SELF FOCUS
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 2
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 3
Important Warranty Information Regarding Television
Format Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are
primarily designed to view standard format full-motion video. The images displayed on them
should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary
graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen
pictures), should be limited to no more than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are
primarily designed to view wide screen format full-motion video. The images displayed on them
should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your
model offers this feature, and constantly moving. Displaying stationary graphics and images on
screen, such as the dark side-bars on non-expanded standard format television video and
programming, should be limited to no more than 15% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video
game displays, station logos, web sites or computer graphics and patterns, should be limited as
described above for all televisions. Displaying any stationary images that exceed the above
guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent
burned-in ghost images in the television picture. To avoid this, vary the programming and
images, and primarily display full screen moving images, not stationary patterns or dark bars.
On television models that offer picture sizing features, use these controls to view the different
formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven CRT
aging as a result of format selection and use, as well as other burned-in images, is not covered by
your Samsung limited warranty.
English - 3
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 4
Contents
◆ FOREWORD
■
Important Warranty Information Regarding Television Format Viewing ........
3
◆ CONNECTING AND PREPARING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Control Panels (depending on the model) .....................................................
6
Connection Panels (depending on the model) ..............................................
7
Using a Display Deck (depending on the model) ..........................................
8
Infrared Remote Control ................................................................................
9
Inserting the Batteries in the Remote Control................................................
10
Connecting to an Aerial or Cable Television Network ...................................
10
Connecting a Satellite Receiver or Decoder..................................................
11
Switching Your Television On and Off...........................................................
12
Placing Your Television in Standby Mode .....................................................
12
Becoming Familiar with the Remote Control .................................................
13
Plug & Play Feature....................................................................................... 14~15
Displaying Information ...................................................................................
15
Choosing Your Language..............................................................................
16
Adjusting the Screen Automatically (Self Focus)...........................................
17
Deactivating the Automatic Execution of the Self Focus ..............................
18
Removing the “Self Focus” from the Display .................................................
19
◆ SETTING THE CHANNELS
■
■
■
■
■
■
■
Storing Channels Automatically.....................................................................
20
Sorting the Stored Channels .........................................................................
21
Storing Channels Manually............................................................................ 22~23
Skipping Unwanted Channels .......................................................................
24
Assigning Names to Channels ......................................................................
25
Locking the Channel......................................................................................
26
Fine Tuning Channel Reception ....................................................................
27
◆ USING YOUR TELEVISION
■
■
■
■
■
■
■
■
■
■
Viewing the Channel Scan Picture ................................................................
28
Using the LNA (Low Noise Amplifier) Feature...............................................
28
Changing the Picture Standard .....................................................................
29
Customizing the Picture Settings...................................................................
30
Selecting the Picture Size (4:3 Model) ..........................................................
31
Selecting the Picture Size (Wide Model) ....................................................... 32~33
Selecting the Scan Mode...............................................................................
34
Using the Digital NR (Digital Noise Reduction) Feature ................................
35
Freezing the Current Picture .........................................................................
35
DNIeTM (Digital Natural Image engine)
...............................................
36
English - 4
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 5
Contents (continued)
◆ USING YOUR TELEVISION (continued)
■
■
■
■
■
■
■
■
■
■
■
■
■
Setting the Blue Screen Mode.......................................................................
37
Viewing the Picture In Picture (PIP) .............................................................. 38~39
Changing the Sound Standard ......................................................................
40
Adjusting the Sound Settings ........................................................................
41
Adjusting the Volume Automatically ..............................................................
41
Setting the External Sound............................................................................
42
Setting the SRS TSXT...................................................................................
43
Setting the Melody Sound .............................................................................
44
Selecting the Sound Mode (depending on the model) ..................................
45
Setting and Displaying the Current Time.......................................................
46
Setting the Sleep Timer .................................................................................
47
Switching the Television On and Off Automatically .......................................
48
Viewing an External Signal Source ...............................................................
49
◆ USING THE TELETEXT FEATURE
■
■
■
■
■
Teletext Feature ............................................................................................
Displaying the Teletext Information ...............................................................
Selecting Display Options..............................................................................
Selecting a Teletext Page (depending on the model)....................................
Storing Teletext Pages ..................................................................................
50
51
52
53
54
◆ ADDITIONAL INFORMATION AND CONNECTIONS
■
■
■
■
■
■
Connecting to the External Input/Outputs......................................................
Connecting to the Audio Output ....................................................................
Connecting to the RCA Input ........................................................................
Connecting to the S-Video Input ...................................................................
Connecting to the Component Input..............................................................
Redirecting an Input to the External Output ..................................................
55
56
56
57
57
58
◆ RECOMMENDATIONS FOR USE
■
■
Programming the Remote Control for Other Components ............................ 59~61
- VCR Remote Control Codes ......................................................................
60
- Cable Box (CATV) Remote Control Codes ................................................
61
- DVD Remote Control Codes ......................................................................
61
Troubleshooting: Before Contacting Service Personnel................................
62
Symbols
Press
☛
Important
➢
Note
English - 5
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 6
Control Panels (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
( a ) Input Source Selection
( e ) Channel Selection
( b ) Menu Display
(f)
( c ) Accessing to the Selected Option
on the Menu System
( d ) Volume Adjustment
➢
Remote Control Sensor
( g ) Standby & Timer Indicator
( h ) Power On/Off
(i)
Picture On/Off
Using the Buttons on the Panel
If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to:
◆ Switch on the TV when it is in Standby mode and select channels (
C/P.
or
Picture On/Off)
◆ Access the menu ( MENU )
◆ Adjust the volume ( +)
◆ Switch among Video input modes ( SOURCE ) and access to the selected option on the menu
system ( )
English - 6
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 7
Connection Panels (depending on the model)
➢
The actual configuration on your TV may be different, depending on
your model.
Side of the TV
Video Input
Video Input
Audio Input
Audio Input
S-Video Input
S-Video Input
Rear of the TV
75Ω Coaxial Connector for Aerial or Cable Network
Component Input
Audio Output
SCART Audio/Video Input/Output
:
➢
☛
For further details about connection, refer to pages 55~57.
Whenever you connect an audio or video system to your television, ensure that all elements are switched
off. Refer to the documentation supplied with your equipment for detailed connection instructions and
associated safety precautions.
English - 7
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 8
Using a Display Deck (depending on the model)
You can display a VCR or DVD Player, etc. by using the display
deck.
SP54T8
SP54T8
SP43W6
SP43Q1/47Q1
English - 8
1
Hold the center of the door and lift it up in the direction of arrow.
2
After placing a component you have in the display deck, hold the
center of the door and pull it down.
➢
You should display only the component that is within
126mm high. When displaying a component in the
display deck, please space it out 30mm from the front,
20mm from either end.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 9
Infrared Remote Control
TELEVISION STANDBY
WHEN YOU PRESS A BUTTON , ‘
’
APPEARS ALONG WITH SELECED MODE
(TV, VCR, CATV, DVD OR STB) AND
REMAINING BATTERIES ON LCD
PICTURE SIZE/
TELETEXT SIZE SELECTION
TUNER/CABLE NETWORK
SELECTION
MAKE THE REMOTE CONTROL WORKS
FOR TV, VCR, CATV, DVD PLAYER, STB
DIRECT CHANNEL SELECTION
ONE, TWO, OR THREE-DIGIT
CHANNEL SELECTION/
TELETEXT STORE
(NOT AVAILABLE)
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
SWITCH REPEATEDLY BETWEEN THE
LAST TWO CHANNELS DISPLAYED
NEXT CHANNEL/
TELETEXT NEXT PAGE
EXTERNAL INPUT SELECTION/
TELETEXT MODE (LIST/FLOF)
SELECTION (NOT AVAILABLE)
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
MENU DISPLAY/
TELETEXT INDEX
INFORMATION DISPLAY/
TELETEXT REVEAL
EXIT FROM ANY DISPLAY
CONTROL THE CURSOR
IN THE ON-SCREEN MENU
SOUND EFFECT SELECTION
SRS TruSurround XT
MODE SELECTION
FASTEXT TOPIC SELECTION
SELF FOCUS
AUTOMATIC SWITCH-OFF
DNIe ON/OFF/DEMO
TELETEXT SUB-PAGE
CONFIRM YOUR CHOICE
(STORE OR ENTER)
PICTURE EFFECT SELECTION
SOUND MODE SELECTION
PICTURE FREEZE
PIP FUNCTIONS;
- PIP ACTIVATING OR DEACTIVATING
(PIP ON)
- SWAPPING THE MAIN AND THE SUB
PICTURE (SWAP)
- SELECTING THE CHANNEL OF SUB
PICTURE (P
/
)
REMOTE CONTROL SETUP
TELETEXT CANCEL
IF YOUR REMOTE CONTROL IS NOT
FUNCTIONING PROPERLY, TAKE
OUT THE BATTERIES AND PRESS
THE RESET BUTTON FOR ABOUT
2~3 SECONDS. RE-INSERT THE
BATTERIES AND TRY USING THE
REMOTE CONTROL AGAIN.
➢
VCR/DVD FUNCTIONS;
- REWIND (
)
- STOP ( )
- PLAY/PAUSE (
)
- FAST FORWARD (
)
TELETEXT PAGE HOLD
The performance of the remote control may be affected by bright light.
English - 9
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 10
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1
Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2
Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ - on the battery against - on the remote control
◆ + on the battery against + on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Connecting to an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ “Storing Channels Automatically” on page 20.
◆ “Storing Channels Manually” on page 22.
Rear of the TV
or
Cable Television
Network
English - 10
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 11
Connecting a Satellite Receiver or Decoder
In order to watch television programmes broadcast via a
satellite network, you must connect a satellite receiver to
the rear of TV. Also, in order to descramble a coded
transmission signal, you must connect a decoder to the
rear of TV.
Rear of the TV
◆ Using a SCART cable
Connect the receiver (or decoder) SCART cable to one
of the SCART connectors on the rear of the television.
◆ Using a coaxial cable
Connect a coaxial cable to the:
- Receiver (or Decoder) output socket.
- Television aerial input socket.
➢
If you wish to connect both a satellite receiver
(or decoder) and a VCR, you should connect the:
◆ Receiver (or Decoder) to the VCR
◆ VCR to the television
Satellite receiver/
Decoder
Otherwise, connect the receiver (or decoder) directly
to the television.
English - 11
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 12
Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
TV
2
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
Press the “ I ” button (On/Off) on the front or side of the television.
Result:
3
The Standby indicator on the front of the television
lights up.
Press the POWER (
television on.
Result:
➢
) button on the remote control to switch the
The programme that you were watching last is reselected automatically.
◆ If your television isn’t turned on when the POWER ( )
button is pressed, press the SELECT button to check if
the “ TV ” mode has been chosen.
◆ If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically” on
page 20 or “Storing Channels Manually” on page 22.
4
To switch your television off, press the “ I ” button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce
the power consumption.
TV
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER (
Result:
2
The screen is turned off and the Standby indicator on
the front of the television lights up.
To switch the television back on, simply press the POWER (
button again or a numeric button.
➢
☛
English - 12
) button on the remote control.
You can also switch on by pressing the TV (
button.
) or P
)
/
Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ I ”
button (On/Off) on the front or side of the television. It is
best to unplug the set from the mains and aerial.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 13
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
to
Viewing Function
Menu Function
Used to display the next
stored channel.
-
Used to display the
previous stored channel.
-
Used to display the corresponding channels.
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this will
result in a single digit channel being displayed.
➢
-/--/---
Used to select a channel numbered ten or over.
Press this button, and the “--” or “---” symbol is displayed.
Enter the two or three-digit channel number.
PRE-CH
(
)
Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the numeric buttons to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the
volume.
-
Used to decrease the
volume.
-
MUTE
(
)
Used to switch the sound off temporarily.
To turn the sound back on, press this button again, or
press the
or
button.
MENU
(
)
Used to display the
on-screen menu system.
Used to return to the previous
menu or normal viewing.
-
Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
-
Used to confirm your choice.
TV
(
)
EXIT
(
)
➢
Used to switch the
television on when it is
in Standby mode.
-
Used to exit from the menu
system and return to normal
viewing directly
Used to exit from the any
disply.
English - 13
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:58 PM
Page 14
Plug & Play Feature
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The following
settings are available.
Plug & Play
Start Plug & Play
OK
Enter
1
Return
If the television is in Standby mode, press the POWER (
on the remote control.
Result:
Plug & Play
2
Language
The message Start Plug & Play is displayed.
To start the Plug & Play, press the ENTER (
Result:
English
) button
) button.
The Language menu is displayed.
ългарски
Hrvatski
Čeština
Nederlands
Français
3
Result:
†
Move
Enter
Skip
4
Plug & Play
5
OK
Skip
The Country menu is displayed.
Select your country by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm your choice.
Result:
6
The message Check antenna input. is displayed.
Make sure that the antenna is connected to the TV, and then
press the ENTER (
) button.
Result:
Check antenna input.
Enter
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm the language.
The Search menu is displayed.
To start the channel store, press the ENTER (
) button.
Plug & Play
Result:
Country
Belgium
Germany
Spain
France
Italy
Netherlands
➢
†
Move
Enter
Skip
7
Start
Enter
Skip
Plug & Play
Hour
Minute
--
--
œ √ Move
Enter
Adjust
Skip
Plug & Play
Enjoy your watching.
OK
English - 14
To stop the search before it has finished or return to normal
viewing, press the MENU (
) button.
Press the œ or √ button to move to the Hour or Minute.
Set the hour or minute by pressing the ▲ or ▼ button.
➢
Search
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range (with lowest first and highest last).
When it has finished, the Clock menu is displayed.
You can also set the Hour and Minute by pressing the
numeric buttons directly.
8
Press the ENTER (
9
When the setting has finished all, the message Enjoy your
watching. is displayed, and then the channel which has been
stored will be activated.
) button.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 15
Plug & Play Feature (continued)
If you want to reset this feature...
TV
1
Press the MENU (
Result:
2
√
Time
√
Plug & Play
The main menu is displayed.
Language
: English
√
√
Press the ▲ or ▼ button until the Setup is selected.
Self Focus
Blue Screen
: Off
√
Result:
Melody
: On
√
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Plug & Play option is selected.
Press the ENTER (
) button.
Result:
5
Setup
) button.
) button.
▼ More
Move
Enter
This feature starts with the message Start Plug &
Play is displayed.
For further details on how to set, refer to the opposite page.
Displaying Information
You can view the channel information and setting status you select
by pressing the “INFO (
)” button on the remote control.
P 1
Mono
Picture
Sound
12 : 02
:
:
Dynamic
Standard
English - 15
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 16
Choosing Your Language
TV
Setup
√
Time
√
Plug & Play
Language
√
: English
Blue Screen
: Off
√
Melody
: On
√
Press the MENU (
Result:
2
▼ More
Enter
TV
) button.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Return
The main menu is displayed.
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Language is selected. Press the
ENTER (
) button.
) button.
Setup
English
Time
Language
Self Focus
Blue Screen
Melody
▼ More
√
ългарски √
Plug & Play
Move
1
√
Self Focus
Move
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
Hrvatski √
: English
Čeština
√
Nederlands
√
: Off
Français
√
: On
Deutsch
†
Enter
English - 16
Return
Result:
5
The languages available are listed.
Select the appropriate language by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm your choice.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 17
Adjusting the Screen Automatically (Self Focus)
The “Self Focus” feature automatically finds the optimum picture
quality when blurring, overlapping colours or incorrect focus
occurs. These conditions may be caused by moving your TV.
TV
Setup
√
Time
√
Plug & Play
1
Press the MENU (
Result:
2
) button.
Language
The main menu is displayed.
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Self Focus is selected.
Press the ENTER (
) button.
Blue Screen
: Off
√
Melody
: On
√
▼ More
Move
Enter
5
Result:
➢
➢
Self Focus
√
Self Focus
The Self Focus is selected.
Press the ENTER (
Return
) button.
TV
Result:
√
Self Focus
Press the ▲ or ▼ button until the Setup is selected.
Result:
√
: English
Auto
: On
√
Message Display
: On
√
) button again
The self focus process begins with the message Self
Focus and horizontal bar is displayed. During the
process, minor distortions of the picture may occur. At
this time, the colors may diffuse and a searching action
will appear on the edges of the screen. This is a normal
part of the adjustment. When it is finished, all of things
will disappear and the optimum picture quality can be
enjoyed.
Move
Enter
Return
Self Focus
You can also set these options simply by pressing the
SELF FOCUS button.
◆ Changing channels and any other signal changes will
pause the self focus until a stable signal has returned.
It resumes after the signal has been stabilised. This
feature will not work without a signal.
◆ Ambient light that is too bright may affect the self focus.
If this occurs, darken the environment and try again.
English - 17
BP68-00280A (J59A_Euro_ENG)
4/14/04
10:21 AM
Page 18
Deactivating the Automatic Execution of the Self Focus
TV
Setup
√
Time
√
Plug & Play
Language
: English
√
The “Self Focus” feature starts on default. It will automatically
begin 10 minutes after switching on the power and the appearance
of the screen image. To set the optimum picture quality, the
“Self Focus” will automatically begin again after another 30
minutes, as the screen image is then fully stabilised.
√
Self Focus
Blue Screen
: Off
√
Melody
: On
√
1
Result:
▼ More
Move
Enter
Return
Press the
2
Self Focus
√
Self Focus
Auto
: On
√
Message Display
: On
√
Enter
TV
Self Focus
√
Self Focus
Message Display
: On Off √
: On On √
Enter
Return
Auto
Move
Return
English - 18
The main menu is displayed.
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Self Focus is selected.
Press the ENTER (
) button.
Result:
Move
) button.
Press the ▲ or ▼ button until the Setup is selected.
Result:
TV
Press the MENU (
) button.
The options available in the Self Focus group are
displayed.
5
Press the ▲ or ▼ button until the Auto is selected.
Press the ENTER (
) button.
6
To turn off the automatic execution of the self focus feature, select
Off by pressing the ▲ or ▼ button. Press the ENTER (
)
button to confirm.
BP68-00280A (J59A_Euro_ENG)
4/14/04
10:21 AM
Page 19
Removing the “Self Focus” from the Display
1
Press the MENU (
Result:
2
) button.
TV
The main menu is displayed.
Press the ENTER (
4
Press the ▲ or ▼ button until the Self Focus is selected.
Press the ENTER (
) button.
Result:
5
Press the ▲ or ▼ button until the Message Display is selected.
Press the ENTER (
) button.
6
To remove the message Self Focus and horizontal bar on the
screen during the self focus process, select Off by pressing the ▲
or ▼ button. Press the ENTER (
) button to confirm.
: English
√
√
Self Focus
) button.
The options available in the Self Focus group are
displayed.
√
Language
The options available in the Setup group are displayed.
3
√
Plug & Play
Press the ▲ or ▼ button until the Setup is selected.
Result:
Setup
Time
Blue Screen
: Off
√
Melody
: On
√
▼ More
Move
Enter
TV
Return
Self Focus
√
Self Focus
Auto
: On
√
Message Display
: On
√
Move
Enter
TV
Return
Self Focus
√
Self Focus
Move
√
Auto
: On
Message Display
: On Off √
On
Enter
Return
English - 19
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 20
Storing Channels Automatically
TV
Channel
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
Child Lock
√
You can scan for the frequency ranges available to you, (availability
depends on your country). Automatically allocated programme
numbers may not correspond to actual or desired programme
numbers. However you can sort numbers manually and clear any
channels you do not wish to watch.
1
Press the MENU (
) button.
Result:
The main menu is displayed.
2
Press the ▲ or ▼ button until the Channel is selected.
Result:
The options available in the Channel group are
displayed.
3
Press the ENTER (
) button.
Result:
The Auto Store is selected.
4
Press the ENTER (
) button again.
Result:
The Auto Store menu is displayed with Country
option selected.
5
Press the ENTER (
) button once again. Select your country
by pressing the ▲ or ▼ button.
The countries are displayed in the following order:
Belgium - Germany - Spain - France - Italy - Netherlands Switzerland - Sweden - United Kingdom - Eastern Europe Others.
➢ If you have selected the Others option but do not wish to
scan the PAL frequency range, store the channels manually
(see page 22).
6
Press the ENTER (
7
Press the ▲ or ▼ button until the Search is selected. Press the
ENTER (
) button.
8
Press the ENTER (
) button to start the search.
Result:
The search will end automatically. Channels are sorted
and stored in an order which reflects their position in
the frequency range, (with lowest first and highest last).
The programme originally selected is then displayed.
To stop the search before it has finished or return to normal
viewing, press the MENU (
) button.
▼ More
Move
Enter
TV
Return
Auto Store
Country
: Off Belgium
Germany
Spain
France
Italy
Netherlands
Search
▼
Move
Enter
TV
Return
Auto Store
Country
: Belgium
√
√
Search
Move
Enter
Return
Search
Start
Enter
➢
Return
Search
9
When searching and storing are complete, the Sort menu is
displayed.
◆ To sort the stored channels into the desired numerical order,
go to Step 5 of the “Sorting the Stored Channels” procedure
on page 21.
◆ To exit from the channel store function without sorting the
channels, press the MENU (
) button repeatedly until the
menus disappear.
10
When the channels have been stored, you can:
◆ Sort them in the order required (see page 21)
◆ Assign a name to the stored channels (refer to page 25)
◆ Clear a channel (see page 24)
◆ Fine-tune channel reception if necessary (see page 27)
◆ Activate/deactivate the LNA (Low Noise Amplifier) feature
(see page 28)
◆ Activate/deactivate the Digital NR (Digital Noise Reduction)
feature (see page 35)
P 1 C ------ 65 MHz
Stop
Enter
Return
TV
Sort
Prog.
Move
1
C- -
-----
2
C- -
-----
3
C- -
-----
4
C- -
-----
5
C- -
-----
Enter
English - 20
) button to confirm your choice
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 21
Sorting the Stored Channels
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using the
auto store. You can delete those channels you do not want to keep.
1
Press the MENU (
Result:
2
) button.
The main menu is displayed.
The options available in the Channel group are
displayed.
Press the ENTER (
) button.
Channel
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
Child Lock
√
▼ More
Press the ▲ or ▼ button until the Channel is selected.
Result:
3
TV
Move
Enter
TV
Return
Sort
Prog.
4
Press the ▲ or ▼ button until the Sort is selected. Press the
ENTER (
) button.
Result:
5
6
Select the channel that you wish to move by pressing the ▲ or ▼
button. Press the ENTER (
) button.
Select the number of the programme to which the channel is to be
moved by pressing the ▲ or ▼ button. Press the ENTER (
)
button.
Result:
7
The Sort menu is displayed.
1
C- -
-----
2
C- -
-----
3
C- -
-----
4
C- -
-----
5
C- -
-----
Move
Enter
TV
Return
Sort
Prog.
The channel is moved to its new position and all other
channels are shifted accordingly.
Repeat Steps 5 to 6 until you have moved all the channels to the
required programme numbers.
Move
1
C- -
-----
2
C- -
-----
3
C- -
-----
4
C- -
-----
5
C- -
-----
Enter
English - 21
C 1 -----
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 22
Storing Channels Manually
TV
You can store the television channels, including those received via
cable networks.
Channel
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
Child Lock
√
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found
◆ The programme number of each stored channel which
you wish to identify
▼ More
Move
Enter
TV
Return
1
Result:
Manual Store
2
Prog.
Move
1
C- - - - - - -
AUTO
BG
2
C- - - - - - -
AUTO
BG
3
C- - - - - - -
AUTO
BG
4
C- - - - - - -
AUTO
BG
5
C- - - - - - -
AUTO
BG
Enter
Press the MENU (
Return
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the Channel is selected.
Result:
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Manual Store is selected.
Press the ENTER (
) button.
Result:
) button.
The current channels are displayed.
Manual Store
Prog.
Colour
System
Sound
System
1
AUTO
BG
Channel
Search
Store
C- -
83MHz
?
œ √ Move
Adjust
5
Result:
To assign a programme number to a channel, find the correct
number by pressing the ▲ or ▼ button.
7
If necessary, select the broadcasting standard required. Press the
œ or √ button until the Colour System is selected and press the
▲ or ▼ button. The colour standards are displayed in the following
order.
Return
Prog.
Colour
System
Sound
System
1
AUTO
BG
Channel
Search
Store
C- -
83MHz
?
Adjust
Return
Manual Store
Prog.
Colour
System
Sound
System
1
AUTO
BG
Channel
Search
Store
C- -
83MHz
?
œ √ Move
Adjust
English - 22
The Prog. is selected.
6
Manual Store
œ √ Move
Select the channel that you wish to move by pressing the ▲ or ▼
button. Press the ENTER (
) button.
Return
AUTO - PAL - SECAM - NT4.43
8
Press the œ or √ button until the Sound System is selected and
press the ▲ or ▼ button. The sound standards are displayed in
the following order.
BG - DK - I - L
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 23
Storing Channels Manually (continued)
9
If you know the number of the channel to be stored, see the
following steps.
◆ Press the œ or √ button until the Channel is selected.
◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable
channel).
◆ Press the √ button
◆ Press the ▲ or ▼ button to select the required number.
➢
10
Manual Store
Prog.
Result:
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
1
AUTO
BG
Search
Store
C- -
83MHz
?
œ √ Move
12
☛
Channel mode
◆ P (Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆ C (Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆ S (Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
Return
Prog.
Colour
System
Sound
System
1
AUTO
BG
Channel
Search
Store
C- -
83MHz
?
To store the channel and associated programme number, select
Store by pressing the œ or √ button. Set to OK by pressing the
ENTER (
) button.
Repeat Steps 9 to 11 for each channel to be stored.
Adjust
Manual Store
œ √ Move
11
Sound
System
Channel
If no sound or abnormal sound can be heard, re-select the
sound standard required.
If you do not know the channel numbers, select the Search by
pressing the œ or √ button. Press the ▲ or ▼ button to start the
search.
Colour
System
Adjust
Return
Manual Store
Prog.
Colour
System
Sound
System
1
AUTO
BG
Channel
Search
Store
C- -
83MHz
?
œ √ Move
Adjust
Return
Manual Store
Prog.
Colour
System
Sound
System
1
AUTO
BG
Channel
Search
Store
C- -
83MHz
OK
œ √ Move
Enter
English - 23
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 24
Skipping Unwanted Channels
TV
Channel
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
Child Lock
√
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those that
you have chosen to skip are thus not displayed. All channels that
you do not specifically choose to skip are displayed during
scanning.
1
Result:
▼ More
Move
Press the MENU (
Enter
Return
2
Result:
1
In Memory
< >
Change
Enter
Return
Press the ENTER (
4
Press the ▲ or ▼ button until the Add/Delete is selected. Press
the ENTER (
) button.
Result:
Add/Delete
P
1
Not in Memory
< >
Change
Enter
English - 24
Return
) button.
The Add/Delete menu is displayed with the current
channel selected.
5
To delete or add the required channel, select the Delete or Add
and press the ENTER (
) button.
6
Repeat Step 5 for each channel to be erased or added.
Add
P
The options available in the Channel group are
displayed.
3
Delete
P
The main menu is displayed.
Press the ▲ or ▼ button until the Channel is selected.
Add/Delete
P
) button.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 25
Assigning Names to Channels
Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
1
Press the MENU (
Result:
2
4
7
The options available in the Channel group are
displayed.
) button.
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
Child Lock
√
Move
Enter
TV
Return
Name
Prog.
The Name menu is displayed with the current channel
selected.
If necessary, select the channel to be assigned a new name by
pressing the ▲ or ▼ button. Press the ENTER (
) button.
Channel
Auto Store
▼ More
Press the ▲ or ▼ button until the Name is selected. Press the
ENTER (
) button.
Result:
6
The main menu is displayed.
Press the ENTER (
Result:
5
) button.
Press the ▲ or ▼ button until the Channel is selected.
Result:
3
TV
Name
1
C- -
-----
2
C- -
-----
3
C- -
-----
4
C- -
-----
5
C- -
-----
Move
Enter
Return
Arrow indications are displayed around the name box.
Press the ▲ or ▼ button to select a letter (A~Z), a number (0~9)
or a symbol (-, space). Move on the previous or next letter by
pressing the œ or √ button.
TV
Name
Prog.
When you have finished entering the name, press the ENTER
(
) button to confirm the name.
œ √ Move
Name
1
C- -
-----
2
C- -
-----
3
C- -
-----
4
C- -
-----
5
C- -
-----
Adjust
English - 25
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 26
Locking the Channel
TV
Channel
Auto Store
√
Manual Store
√
Add/Delete
√
Sort
√
Name
√
Child Lock
√
This feature allows you to lock the television so that it cannot be
switched on via the front panel. It can, however, still be switched
on via the remote control. Thus, by keeping the remote control
away from unauthorised users, such as children, you can prevent
them from watching unsuitable programme.
1
▼ More
Move
Result:
Enter
) button.
The main menu is displayed.
Return
2
TV
Press the MENU (
Press the ▲ or ▼ button until the Channel is selected.
Result:
Child Lock
The options available in the Channel group are
displayed.
Prog.
1
C- - - - - - -
2
C- - - - - - -
3
C- - - - - - -
4
C- - - - - - -
5
C- - - - - - -
Unlocked
Unlocked
Unlocked
Unlocked
Unlocked
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Child Lock is selected. Press
the ENTER (
) button.
Result:
Move
Enter
TV
Return
The Child Lock menu is displayed and the current
channel is shown as selected.
5
Press the ▲ or ▼ button to select the channel to be locked.
6
Press the ENTER (
) button. To lock the channel, select
Locked by pressing the ▲ or ▼ button (to unlock the channel,
select Unlocked). Press the ENTER (
) button to confirm.
Child Lock
Prog.
Adjust
) button.
1
C- - - - - - -
2
C- - - - - - -
3
C- - - - - - -
4
C- - - - - - -
5
C- - - - - - -
Enter
English - 26
Locked
Unlocked
Unlocked
Unlocked
Unlocked
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 27
Fine Tuning Channel Reception
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
TV
Channel
▲ More
√
Fine Tune
√
Scan
1
Press the MENU (
Result:
2
) button.
√
: Off
The main menu is displayed.
Press the ▲ or ▼ button until the Channel is selected.
Result:
LNA
Move
Enter
Return
The options available in the Channel group are
displayed.
Fine Tune
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Fine Tune is selected. Press
the ENTER (
) button.
Result:
) button.
The horizontal bar is displayed.
5
To obtain a sharp and clear picture and good sound quality, press
the œ or √ button until you reach the setting.
6
To store the fine tuning setting in the TV’s memory, press the
ENTER (
) button.
P 1
0
Reset
œ √ Adjust
Return
Save
Move
Fine Tune
P 1
0
Reset
7
To reset the fine tuning to 0, select Reset by pressing the ▲ or ▼
button then press the ENTER (
) button.
Move
Return
Enter
English - 27
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 28
Viewing the Channel Scan Picture
TV
1
Channel
Result:
▲ More
√
Fine Tune
√
Scan
LNA
: Off
Move
Press the MENU (
Enter
2
√
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the Channel is selected.
Result:
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Scan is selected. Press the
ENTER (
) button.
) button.
Return
Result:
You can view every memorized channel in order.
Using the LNA (Low Noise Amplifier) Feature
TV
This feature is very useful in the situation that the TV is used in a
weak signal, and amplifies the TV signal in the weak signal area, but
not noise.
Channel
▲ More
Fine Tune
√
Scan
√
LNA
: Off
This feature is working only in a weak signal condition, and that is
memorized on relevant channel’s additional information.
√
1
Press the MENU (
Result:
Move
Enter
TV
Return
2
▲ More
√
Fine Tune
√
Scan
LNA
Move
: Off Off
On
Enter
English - 28
√
Return
The main menu is displayed.
Press the ▲ or ▼ button until the Channel is selected.
Result:
Channel
) button.
The options available in the Channel group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the LNA is selected. Press the
ENTER (
) button.
5
Select Off or On by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
) button.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 29
Changing the Picture Standard
You can select the picture mode which best corresponds to your
viewing requirements.
1
Press the MENU (
6
√
Colour Tone
√
: Normal
√
Size
Scan Mode
: Auto
√
Digital NR
: Off
√
▼ More
Move
Enter
Return
) button.
The Mode is selected.
TV
Picture
√
Size
: Dynamic
Dynamic
Standard
Movie
: Normal
Custom
Select the required option by pressing the ▲ or ▼ button.
Scan Mode
: Auto
√
Digital NR
: Off
√
Result:
▼ More
Mode
Press the ENTER (
Result:
5
The options available in the Picture group are
displayed.
√
: Dynamic
Custom
The main menu is displayed.
Press the ENTER (
Result:
4
) button.
Press the ▲ or ▼ button until the Picture is selected.
Result:
3
Picture
Mode
Result:
2
TV
Custom
Colour Tone
The options available are listed.
The following modes are available:
Dynamic - Standard - Movie - Custom
Press the ENTER (
➢
) button again.
Move
Enter
) button to confirm.
You can select these options by simply pressing the
P.MODE (
: Picture Mode) button on the remote
control.
Dynamic
English - 29
√
√
√
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 30
Customizing the Picture Settings
TV
Your television has several settings options that allow you to
control picture quality.
Picture
Mode
√
: Dynamic
√
Custom
Colour Tone
√
: Normal
1
√
Size
Scan Mode
: Auto
√
Digital NR
: Off
√
▼ More
Press the MENU (
Result:
2
Enter
TV
The main menu is displayed.
Press the ▲ or ▼ button until the Picture is selected.
Result:
Move
) button.
Return
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Custom is selected. Press the
ENTER (
) button.
) button.
Custom
Contrast
Brightness
Sharpness
Colour
100
50
75
55
Result:
5
Move
Enter
Return
Select the option (Contrast, Brightness, Sharpness, Colour
or Tint-NTSC only) to be adjusted by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
Result:
Contrast
100
TV
Picture
Mode
√
: Dynamic
√
Custom
Colour Tone
√
: Normal
√
Size
Scan Mode
: Auto
√
Digital NR
: Off
√
▼ More
Move
Enter
Colour Tone
Return
Normal
English - 30
The Custom menu is displayed.
The horizontal bar is displayed. Pess the œ or √ button
until you reach the setting.
6
Press the MENU (
) button to return to the Picture menu.
Press the ▲ or ▼ button until the Colour Tone is selected. Press
the ENTER (
) button.
7
Select the required colour tone (Warm1 ~ Warm10, Normal, Cool1
~ Cool10) by pressing the œ or √ button.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 31
Selecting the Picture Size (4:3 Model)
You can select the picture size which best corresponds to your
viewing requirements.
1
2
TV
Picture
Mode
Press the MENU (
) button.
The main menu is displayed.
Result:
Colour Tone
4
Press the ▲ or ▼ button until the Size is selected. Press the
ENTER (
) button.
Result : The Size menu is displayed.
) button.
: Normal
√
√
Size
Scan Mode
: Auto
√
Digital NR
: Off
√
▼ More
Move
Press the ENTER (
√
√
Custom
Press the ▲ or ▼ button until the Picture is selected.
Result : The options available in the Picture group are
displayed.
3
: Dynamic
Enter
TV
Return
Size
Normal
Zoom1
5
Select the required mode by pressing the ▲ or ▼ button. Press
the ENTER (
) button.
Result : The following modes are available:
Normal
Adjusts the picture to fit into a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
Zoom 1
Vertically enlarges the picture approximately 130%.
Zoom 2
Vertically enlarges the picture about approximately
150%.
Cinema
When the top and bottom of the screen margin are
black (blank), they will change to gray.
➢
➢
Zoom2
Cinema
Move
Enter
Return
TV
Lifting is available in the Zoom1 or Zoom2 mode by pressing
the ▲ or ▼ button
◆ You can select these options by simply pressing
the P.SIZE button on the remote control.
◆ The picture size can not be changed in the PIP mode.
4:3 Signal
T
Normal
Zoom1
Zoom2
Cinema
Zoom1
Zoom2
Cinema
16:9 Signal
Normal
English - 31
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 32
Selecting the Picture Size (Wide Model)
TV
You can select the picture size which best corresponds to your
viewing requirements.
Picture
Mode
: Dynamic
√
√
Custom
Colour Tone
: Normal
1
√
Size
√
Scan Mode
: Auto
√
Digital NR
: Off
√
Result:
2
▼ More
Move
Return
4
Press the ▲ or ▼ button until the Size is selected. Press the
ENTER (
) button.
5
Return
The options available in the Picture group are
displayed.
Press the ENTER (
Result :
Enter
The main menu is displayed.
3
Size
Auto Wide
16:9
Panorama
Zoom1
Zoom2
4:3
Cinema1
Cinema2
) button.
Press the ▲ or ▼ button until the Picture is selected.
Result :
Enter
TV
Move
Press the MENU (
) button.
The Size menu is displayed.
Select the required mode by pressing the ▲ or ▼ button. Press
the ENTER (
) button.
Result :
The following modes are available:
Auto Wide Automatically enlarges the image to fit the 16:9
aspect ratio providing the optimum display.
16:9
Adjusts the picture to fit into the 16:9 wide aspect
ratio.
Panorama
Adjusts a Wide picture to appear natural.
Zoom 1
Vertically enlarges the picture approximately 130%.
Zoom 2
Vertically enlarges the picture about approximately
150%.
4:3
Adjusts the picture to fit into a 4:3 normal aspect
ratio. (Prolonged use in 4:3 mode may cause the
lifespan of the CRT to be reduced.)
Cinema1
To maintain optimum screen display, the picture is
vertically enlarged and the letterboxed (black margin)
area is filled with gray instead.
Cinema2
When the top and bottom of the screen margin are
black (blank), they will change to gray.
TV
➢
◆ Lifting is available in the Zoom1 or Zoom2 mode by
pressing the ▲ or ▼ button.
◆ Subtitles may be cut-off or hidden below the screen area
in Zoom1, Zoom2, Cinema1 and Cinema2 modes.
➢
English - 32
◆ You can select these options by simply pressing the
P.SIZE button on the remote control.
◆ The picture size can not be changed in the PIP mode.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 33
Selecting the Picture Size (Wide Model) (continued)
4:3 Signal
Auto Wide
Auto Wide
Zoom2
Zoom2
16:9
16:9
4:3
4:3
Panorama
Panorama
Cinema1
Cinema1
Zoom1
Zoom1
Cinema2
Cinema2
16:9 Signal
Auto Wide
Auto Wide
Zoom2
Zoom2
16:9
16:9
4:3
4:3
Panorama
Panorama
Cinema1
Cinema1
Zoom1
Zoom1
Cinema2
Cinema2
English - 33
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 34
Selecting the Scan Mode
TV
Picture
Mode
: Dynamic
√
√
Custom
Colour Tone
: Normal
You will normally find that scan mode is best set to Natural to
reduce any slight picture flicker. However, it is possible that some
occasional broadcasts (NTSC-M) may benefit by changing the scan
mode.
√
√
Size
Scan Mode
: Auto
√
Digital NR
: Off
√
1
Result:
▼ More
Move
Enter
Return
Press the MENU (
2
Picture
Mode
: Dynamic
√
Colour Tone
: Normal
Size
√
√
: Auto Auto
: Off Natural √
Digital
Progressive
Scan Mode
Digital NR
▼ More
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Scan Mode is selected. Press
the ENTER (
) button.
5
Select the required option by pressing the ▲ or ▼ button.
) button.
√
Custom
Move
√
The main menu is displayed.
Press the ▲ or ▼ button until the Picture is selected.
Result:
TV
) button.
Enter
Result:
Return
6
English - 34
The following modes are available:
Auto - Natural - Digital - Progressive
Press the ENTER (
) button to confirm.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 35
Using the Digital NR (Digital Noise Reduction) Feature
If the signal received by your television is weak, you can activate
this feature to help reduce any static and ghosting that may appear
on the screen.
TV
Picture
Mode
: Dynamic
1
Press the MENU (
Result:
2
The main menu is displayed.
The options available in the Picture group are
displayed.
Press the ENTER (
) button.
5
√
√
Scan Mode
: Auto
√
Digital NR
: Off
√
▼ More
Move
Enter
TV
Return
Picture
Mode
4
: Normal
Size
Press the ▲ or ▼ button until the Picture is selected.
Result:
3
Colour Tone
) button.
√
√
Custom
: Dynamic
√
√
Press the ▲ or ▼ button until the Digital NR is selected. Press
the ENTER (
) button.
Custom
Select Off or On by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
Scan Mode
: Auto
√
Digital NR
: Off Off
On
√
Colour Tone
: Normal
▼ More
Move
√
√
Size
Enter
Freezing the Current Picture
You can freeze the picture when watching a television programme
simply by pressing the “STILL (
)” button. To return to normal
viewing, press it again.
English - 35
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 36
DNIeTM (Digital Natural Image engine)
TV
Picture
▲ More
√
PIP
DNIe
√
: On
This feature brings you more detailed images with 3D noise
reduction, detail enrichment, contrast and white enhancement.
A new image Compensation Algorithm gives brighter, clearer, more
detailed image. DNIeTM technology will always deliver the best
quality pictures from any signal.
1
Press the MENU (
Result:
Move
Enter
Press the ▲ or ▼ button until the Picture is selected.
Result:
Picture
▲ More
√
PIP
DNIe
Move
√
: On On
Off
Demo
Enter
Return
DNIe Demo
DNIe On
DNIe Off
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the DNIe is selected. Press the
ENTER (
) button.
5
Press the ▲ or ▼ button to change the setting. Press the ENTER
(
) button to confirm.
◆ On: Switches on the DNIe mode.
◆ Off: Switches off the DNIe mode.
◆ Demo (Option): The screen before applying DNIe appears on
the right and the screen after applying DNIe
appears on the left.
➢
English - 36
The main menu is displayed.
Return
2
TV
) button.
) button.
You can select these options by simply pressing
the DNIe button on the remote control.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 37
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background. If you
wish to continue viewing the poor picture, you must set the Blue
Screen mode to Off.
TV
Setup
√
Time
√
Plug & Play
Language
1
Press the MENU (
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Blue Screen
: Off
√
Melody
: On
√
▼ More
Move
Enter
Return
The options available in the Setup group are displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Blue Screen is selected.
Press the ENTER (
) button.
5
√
√
Self Focus
Result:
2
: English
) button.
TV
Setup
√
Time
√
Plug & Play
Language
: English
Blue Screen
Select Off or On by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
Melody
√
√
Self Focus
: Off Off
: On On
√
√
▼ More
Move
Enter
English - 37
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 38
Viewing the Picture In Picture (PIP)
Picture
TV
▲ More
√
PIP
DNIe
You can display a sub picture within the main picture of TV program
or external A/V devices. In this way you can watch TV program or
monitor the video input from any connected devices while watching
TV or other video input.
√
: On
1
Press the MENU (
Result:
Move
Enter
Return
2
Result:
PIP
Source
√
: On Off
: TV On
√
√
Swap
Size
:
√
Position
:
√
Prog.
: P 1
√
Move
Enter
The options available in the Picture group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the PIP is selected. Press the
ENTER (
) button.
Result:
) button.
The PIP menu is displayed with PIP option selected.
Return
5
Press the ENTER (
) button again. To activate, set the PIP to
On by pressing the ▲ or ▼ button. Press the ENTER (
)
button.
6
Press the ▲ or ▼ button until the Source is selected. Press the
ENTER (
) button.
PIP
TV
PIP
: On
√
Source
: TV
√
Swap
Size
Position
Prog.
Move
TV
Ext.1
Ext.2
:
Ext.3
:
AV
: P 1
S-Video
Enter
√
Result:
√
√
7
Select a source of the sub picture by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
8
Press the ▲ or ▼ button until the Swap is selected. Press the
ENTER (
) button.
Return
PIP
: On
√
Result:
Source
: TV
√
➢
√
Swap
Size
:
√
Position
:
√
Prog.
: P 1
√
9
Enter
Press the ▲ or ▼ button until the Size is selected. Press the
ENTER (
) button.
Return
➢
PIP
TV
PIP
: On
√
Source
: TV
√
Size
:
√
Position
:
√
Prog.
: P 1
√
Enter
English - 38
Return
The sizes available are displayed.
(Large) (Small) (Double) (3-PIP) (12-PIP)
◆ 12-PIP : You can view up to 12 memorized channels on
the sub picture spontaneously.
◆ On the 12 -PIP or 3-PIP mode, it is impossible to execute
swap and position.
√
Swap
The main picture and the sub picture are interchanged.
Not available in 12-PIP or 3-PIP modes.
Result:
Move
The sources available are displayed.
TV - Ext.1- Ext.2 - Ext.3 - AV - S-Video
√
PIP
TV
Move
The main menu is displayed.
Press the ▲ or ▼ button until the Picture is selected.
PIP
TV
) button.
10
Select a size of the sub picture by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 39
Viewing the Picture In Picture (PIP) (continued)
Press the ▲ or ▼ button until the Position is selected. Press the
ENTER (
) button.
11
Result:
➢
The positions available are displayed.
-
Select a position of the sub picture by pressing the ▲ or ▼ button.
Press the ENTER (
) button.
13
Press the ▲ or ▼ button until the Prog. is selected. Press the
ENTER (
) button. You can select the channel that you want to
view through sub picture by pressing the ▲ or ▼ button.
➢
PIP
: On
√
Source
: TV
√
√
Swap
The Position menu is available when the Size is Large or
Small.
12
PIP
TV
Size
:
√
Position
:
√
Prog.
: P 1
√
Move
Enter
PIP
TV
When the Source is set to TV, you can select the channel of
sub picture.
Return
PIP
: On
√
Source
: TV
√
√
Swap
Size
:
√
Position
:
√
Prog.
: P 1
√
Move
Enter
Return
PIP
TV
PIP
: On
√
Source
: TV
√
√
Swap
Size
:
√
Position
:
√
Prog.
: P 1
P 1
√
Adjust
Easy functions of remote control.
Buttons
Feature
PIP ON
Used to activate or deactivate the PIP function directly.
SWAP
Used to interchange the main picture and the sub picture.
➢
P
/
When the main picture is in the Video mode and the
sub picture is in the TV mode, you might not hear
the sound of main picture when pressing the SWAP
(
) button after changing the sub picture
channel. At this time, reselect the channel of main
picture.
Used to select the channel of sub picture.
English - 39
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 40
Changing the Sound Standard
You can select the type of special sound effect to be used when
watching a given broadcast.
Sound
TV
Mode
: Standard
√
√
Equalizer
Auto Volume
: Off
√
Audio Output
: Fixed
√
Internal Mute
: Off
√
SRS TSXT
: Off
√
1
Press the MENU (
Result:
2
Enter
3
Internal Mute
SRS TSXT
: Off
Equalizer
Auto Volume
Audio Output
Move
Enter
Press the ENTER (
Result:
: Custom
Standard √
Music √
: Off Movie √
Speech √
: Fixed
Custom
√
: Off
Mode
The Mode is selected.
Press the ENTER (
5
Select the required option by pressing the ▲ or ▼ button.
Result:
√
) button again.
The following modes are available:
Standard - Music - Movie - Speech Custom.
Return
Press the ENTER (
➢
English - 40
) button.
4
6
Standard
The options available in the Sound group are displayed.
Return
Sound
TV
The main menu is displayed.
Press the ▲ or ▼ button until the Sound is selected.
Result:
Move
) button.
) button to confirm.
You can select these options by simply pressing the
S.MODE (
: Sound Mode) button on the remote
control.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 41
Adjusting the Sound Settings
The sound settings can be adjusted to suit your personal preferences.
Sound
TV
1
Press the MENU (
) button.
The main menu is displayed.
Press the ▲ or ▼ button until the Sound is selected.
Result:
Press the ENTER (
4
Press the ▲ or ▼ button until the Equalizer is selected.
Press the ENTER (
) button.
Result:
) button.
√
Auto Volume
: Off
√
Audio Output
: Fixed
√
Internal Mute
: Off
√
SRS TSXT
: Off
√
Move
Enter
The Equalizer menu is displayed with the current
option.
Return
Equalizer
TV
R
Select the option to be adjusted by pressing the œ or √ button.
Press the ▲ or ▼ button until you reach the setting.
➢
√
The options available in the Sound group are displayed.
3
5
: Standard
Equalizer
Result:
2
Mode
L
100 300 1K 3K 10K
√ Move
Adjust
Return
If you make any changes to the equalizer settings, the
sound standard is automatically switched to the Custom.
Adjusting the Volume Automatically
Each broadcasting station has its own signal conditions, and so it
is not easy for you to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of
the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the
modulation signal is low.
1
Press the MENU (
Result:
2
3
4
5
Mode
The main menu is displayed.
√
√
Auto Volume
: Off
√
Audio Output
: Fixed
√
Internal Mute
: Off
√
SRS TSXT
: Off
√
Move
: Standard
√
Internal Mute
: Off Off
: FixedOn
: Off
SRS TSXT
: Off
√
Auto Volume
Audio Output
Move
√
√
Equalizer
Press the ▲ or ▼ button until the Auto Volume is selected.
Press the ENTER (
) button.
Return
Sound
Mode
) button.
Select Off or On by pressing the ▲ or ▼ button. Press the
ENTER (
) button to confirm.
Enter
TV
The options available in the Sound group are displayed.
Press the ENTER (
: Standard
Equalizer
) button.
Press the ▲ or ▼ button until the Sound is selected.
Result:
Sound
TV
Enter
English - 41
√
√
Return
BP68-00280A (J59A_Euro_ENG)
4/14/04
8:54 AM
Page 42
Setting the External Sound
This feature allows you can adjust to suit your personal preferences
when the equipment with output is connected to the television.
Sound
TV
Mode
: Standard
√
√
Equalizer
Auto Volume
: Off
√
Audio Output
√
Internal Mute
: Fixed
Fixed
: OffVariable
SRS TSXT
: Off
√
1
Press the MENU (
Result:
Enter
2
Press the ▲ or ▼ button until the Sound is selected.
Mode
: Standard
Move
Press the ENTER (
4
Press the ▲ or ▼ button until the Audio Output is selected.
Press the ENTER (
) button.
√
Auto Volume
: Off
√
Audio Output
: Fixed
√
Internal Mute
: Off Off
: Off On
√
SRS TSXT
3
➢
√
Equalizer
Enter
The options available in the Sound group are displayed.
Return
Sound
TV
The main menu is displayed.
√
Result:
Move
) button.
√
5
) button.
For information about connection of audio outputs, refer to
“Connecting to the Audio Outputs” on page 56.
Select the required option (Fixed or Variable) by pressing the
▲ or ▼ button. Press the ENTER (
) button.
◆ If you want to adjust the volume level with the volume control
on the TV or external amplifier, set to Variable.
Return
◆ If you set to Fixed...
- You can adjust the volume level with the volume control on
the audio amplifier.
- The volume control buttons (MUTE, ,
) of the
television and remote control do not work.
6
Press the ▲ or ▼ button until the Internal Mute is selected.
Press the ENTER (
) button.
If you set to On, no sound outputs of all internal speakers.
➢
English - 42
When the Audio Output is set to Variable, you can select
the Internal Mute and control it.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 43
Setting the SRS TSXT
TruSurround XT is a patented SRS technology that solves the
problem of playing 5.1 multichannel content over two speakers.
Trusurround delivers a compelling, virtual surround sound
experience through any two-speaker playback system, including
internal television speakers. It is fully compatible with all
multichannel formats.
1
Press the MENU (
Result:
2
Sound
TV
Mode
: Standard
Auto Volume
: Off
√
Audio Output
: Fixed
√
Internal Mute
: Off
√
SRS TSXT
: Off
√
) button.
The main menu is displayed.
Move
Enter
The options available in the Sound group are displayed.
Sound
TV
Mode
4
5
6
Return
Press the ▲ or ▼ button until the Sound is selected.
Result:
3
√
√
Equalizer
Press the ENTER (
Press the ▲ or ▼ button until the SRS TSXT is selected. Press the
ENTER (
) button.
Select the required option (Off, 3D Mono or Stereo) by pressing
the ▲ or ▼ button.
Press the ENTER (
➢
: Standard
Move
Auto Volume
: Off
√
Audio Output
: Fixed
√
Internal Mute
: Off
√
SRS TSXT
: Off Off
3D Mono
Stereo
√
Enter
) button to confirm.
◆ TruSurround XT, SRS and Symbol
(
) are trademarks of SRS Labs, Inc.
TruSurround XT technology is
incorporated under license from
SRS Labs, Inc.
◆ You can select these options by simply pressing the
SRS (
) button on the remote control.
√
√
Equalizer
) button.
SRS TSXT : Off
English - 43
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 44
Setting the Melody Sound
You can hear clear melody sound when the television is powered
on or off.
Setup
TV
√
Time
√
Plug & Play
Language
: English
√
1
√
Self Focus
Blue Screen
: Off
√
Melody
: On
√
▼ More
Press the MENU (
Result:
2
Enter
Language
: English
√
√
Self Focus
Move
Press the ENTER (
4
Press the ▲ or ▼ button until the Melody is selected. Press the
ENTER (
) button.
5
Select the required option (Off or On) by pressing the ▲ or ▼
button.
6
Press the ENTER (
√
Plug & Play
Blue Screen
: Off
√
Melody
: On Off
On
√
▼ More
3
√
Time
Enter
English - 44
The options available in the Setup group are displayed.
Return
Setup
TV
The main menu is displayed.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Move
) button.
Return
) button.
) button to confirm.
BP68-00280A (J59A_Euro_ENG)
4/13/04
1:59 PM
Page 45
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular +
NICAM Mono
NICAM ↔ Mono
Mono
(Normal)
NICAM Stereo
NICAM ↔ Mono
Stereo
(Normal)
NICAM Dual I/II
NICAM → NICAM → Mono
Dual I
Dual II (Normal)
→
On-screen indication
→
NICAM
Stereo
Type of broadcast
A2
Stereo
Regular broadcast
(Standard audio)
Mono (Normal use)
Bilingual or Dual I/II
Dual I ↔ Dual II
Stereo
➢
Stereo ↔ Mono
(Forced mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
English - 45
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 46
Setting and Displaying the Current Time
Setup
TV
√
Time
√
Plug & Play
Language
➢
√
: English
√
Self Focus
Blue Screen
: Off
√
Melody
: On
√
▼ More
1
Move
Enter
Return
Clock
-- : --
√
Sleep Timer
Off
√
On Timer
-- : -- Off
√
Off Timer
-- : -- Off
√
Move
Enter
Hour
Minute
11
00
Adjust
English - 46
Press the MENU (
The main menu is displayed.
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Time is selected. Press the
ENTER (
) button.
Result:
) button.
The options available in the Time group are displayed
with Clock is selected.
5
Press the ENTER (
6
Press the ¦ or ‹ button to move to the Hour, Minute. Set the
hour or minute by pressing the ▲ or ▼ button.
➢
Return
) button.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Return
Clock
TV
When pressing the “ I ” button (On/Off) on the panel of
the television, the clock setting will be reset.
Result:
2
Time
TV
√ Move
You can set the television’s clock so that the current time is displayed
by pressing the “INFO (
) ” button. You must also set the time if
you wish to use the automatic on or off timers.
) button.
You can also set the hour and minute by pressing the
numeric buttons directly
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 47
Setting the Sleep Timer
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode.
Setup
TV
√
Time
√
Plug & Play
1
Press the MENU (
Result:
2
Language
) button.
The main menu is displayed.
The options available in the Setup group are
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Time is selected. Press the
ENTER (
) button.
Result:
) button.
Blue Screen
: Off
√
Melody
: On
√
▼ More
Move
Enter
Return
Time
TV
Clock
11 : 35
√
Sleep Timer
Off
√
On Timer
-- : -- Off
√
Off Timer
-- : -- Off
√
The options available in the Time group are displayed.
5
Press the ▲ or ▼ button until the Sleep Timer is selected. Press
the ENTER (
) button.
6
Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for
staying on by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm.
➢
√
Self Focus
Press the ▲ or ▼ button until the Setup is selected.
Result:
√
: English
Move
Clock
11 : 35
√
Sleep Timer
Off Off
30 Off
-- : -60 Off
-- : -90
120
150
180
√
On Timer
Off Timer
Move
Return
Time
TV
◆ You can also set these options simply by pressing the
SLEEP ( ) button.
◆ If the sleep timer is not yet set, Off is displayed.
If the sleep timer is already set, the remaining time
before which the television switches to Standby mode
is displayed.
Enter
Enter
Sleep Timer
30
English - 47
√
√
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 48
Switching the Television On and Off Automatically
You can set the On or Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
Setup
TV
√
Time
√
Plug & Play
Language
◆ Switch off automatically at the time you select
√
: English
√
Self Focus
Blue Screen
: Off
√
Melody
: On
√
➢
▼ More
Move
Enter
Return
Time
TV
11 : 35
√
Sleep Timer
30 Minute
√
On Timer
-- : -- Off
√
Off Timer
-- : -- Off
√
Clock
Move
Enter
1
Press the MENU (
) button.
The main menu is displayed.
Result:
2
Press the ▲ or ▼ button until the Setup is selected.
The options available in the Setup group are
Result:
displayed.
3
Press the ENTER (
4
Press the ▲ or ▼ button until the Time is selected. Press the
ENTER (
) button.
The options available in the Time group are displayed.
Result:
5
Press the ▲ or ▼ button until the On Timer is selected. Press the
ENTER (
) button.
Result:
The options available in the On Timer group are
displayed.
Hour
Minute
Prog.
06
30
P1
Volume
Activation
10
Yes
œ √ Move
6
Select the Hour, Minute, Prog. (programme number) or Volume.
Press the œ or √ button to set these by pressing the ▲ or ▼
button.
Adjust
7
To activate the On Timer with the settings satisfied, select
Activation to by pressing the œ or √ button, then select Yes by
pressing the ▲ or ▼ button.
Return
Time
TV
) button.
Return
On Timer
TV
The first step is to set the television’s clock (refer to “Setting
the Current Time” on page 46). If you have not yet set the
clock, the message Set the clock first. is
displayed.
11 : 35
√
Sleep Timer
30 Minute
√
On Timer
6 : 30 On
√
Off Timer
-- : -- Off
√
8
Press the MENU (
) button.
The options available in the Time group are displayed
Result:
again.
Return
9
Press the ▲ or ▼ button until the Off Timer is selected. Press
the ENTER (
) button.
Result:
The Off Timer menu is displayed.
10
Set the Off Timer as methods for On Timer setting.
Clock
Move
Enter
Off Timer
TV
œ √ Move
Hour
Minute
Activation
23
20
Yes
Adjust
48
Return
➢
Absent Power Off
When you set the timer “On”, your television will eventually
be turned off, if you do not operate any controls during the 3
hours after the TV is turned on by timer. This function is
available in only the timer “On” mode and will prevent a
leakage accident or overheating, caused by your TV left on
for a long time due to the timer “On” (when you are away
on holiday, for example).
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 49
Viewing an External Signal Source
Use the remote control to switch between viewing signals from
connected equipment, such as VCR, DVD, Set-Top Box and the TV
source (broadcast or cable)
Input
TV
Source List
√
: TV
√
Edit Name
1
Press the MENU (
Result:
2
Press the ENTER (
Result:
3
) button.
The options available in the Input group are
displayed.
) button.
Move
Enter
Return
The Source List is selected.
Press the ENTER (
) button again.
Source List
TV
TV
4
Press the ▲ or ▼ button to select signal source, then press the
ENTER (
) button.
Ext.1
:
----
Ext.2
:
----
➢
Ext.3
:
----
AV
:
----
S-Video
:
----
◆ When you connect equipment to the TV, you can choose
between the following sets of jacks : Ext.1, Ext.2,
Ext.3, Component1 or Component2 on the TV’s rear
panel, and AV or S-Video on the TV’s side panel.
▼ More
Move
Enter
Return
◆ You can select these options simply by pressing the
SOURCE (
) button.
5
Press the MENU (
Result:
) button.
Press the ▲ or ▼ button until the Edit Name is selected.
Press the ENTER (
) button.
7
Press the ▲ or ▼ button to select the external source to be edited.
Press the ENTER (
) button.
The device names available are listed.
Result:
VCR - DVD - Cable STB - HD STB Satellite STB - AV Receiver - DVD Receiver Game - Camcorder - DVD Combo DHR (DVD HDD Recorder) - PC.
8
Source List
The options available in the Input group are
displayed again.
6
√
: TV
√
Edit Name
Move
Enter
Ext.1
:
- - ---- - -
√
Ext.2
:
√
Ext.3
:
AV
:
S-Video
:
- - -VCR
- - -DVD
-Cable
- - - STB
HD STB
---Satellite STB
---AV Receiver
- - - -†
Component1 :
Component2 :
Move
Return
Edit Name
TV
Select the required device by pressing the ▲ or ▼ button.
Press the ENTER (
) button to confirm.
➢
Input
TV
Enter
If you change the external source while viewing, pictures
might take a short period of time to be switched.
English - 49
√
√
√
√
√
Return
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 50
Teletext Feature
Most television channels provide written information services via
teletext. Information provided includes:
◆ Television programme times
◆ News bulletins and weather forecasts
◆ Sports results
◆ Travel information
This information is divided into numbered pages (see diagram).
Part
Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
➢
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a coloured heading (FASTEXT system)
English - 50
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 51
Displaying the Teletext Information
You can display Teletext information at any time on your television.
Teletext information to be displayed correctly,
☛ For
channel reception must be stable; otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
1
Select the channel providing the Teletext service using the P
or
button.
2
Press the TTX/MIX (
) button to activate the teletext mode.
The contents page is displayed. It can be redisplayed
Result:
at any time by pressing the
(index) button.
3
Press the TTX/MIX (
) button again.
The screen will be split into two. This Double Teletext
Result:
feature lets you view the actual broadcast and teletext
information separately on the screen.
4
If you wish to display the actual broadcast at the same time as
the teletext page, press the TTX/MIX (
) button again.
5
Press the TV (
TV
) button to exit from the teletext display.
English - 51
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 52
Selecting Display Options
When you have displayed a Teletext page, you can select various
options to suit your requirements.
To display...
TV
◆ Hidden text
(answers to quiz games, for example)
(reveal)
◆ The normal screen
(reveal) again
◆ A secondary page
(sub-page)
◆ The broadcast when searching for a page
(cancel)
◆ The next page
(page up)
◆ The previous page
(page down)
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
(size)
• Once
• Twice
◆ Normal screen
• Three times
➢
English - 52
Press the...
To return to the normal display after using the reveal or
size feature, press the TV (
) button.
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 53
Selecting a Teletext Page
You can enter the page number directly by pressing the numeric
buttons on the remote control.
1
Enter the three-digit page number given in the content by
pressing the corresponding numeric buttons.
Result:
TV
The current page counter is incremented and the
page is then displayed. If the selected page is linked
with several secondary pages, the secondary pages
are displayed in sequence. To freeze the display on a
given page, press the
(hold). Press it again to
resume.
2
If the FASTEXT system is used by the broadcasting company,
the different topics covered on a Teletext page are colour-coded
and can be selected by pressing the coloured buttons on the
remote control.
Press the coloured button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result:
The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
◆ Press the
(sub-page) button.
Result:
The available subpages appear.
◆ Select the required sub-page. Sub-pages can be scrolled by
pressing the
or
button.
5
When you have finished, press the TV (
your normal broadcast.
) button to return to
English - 53
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 54
Storing Teletext Pages (depending on the model)
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
Result:
➢
English - 54
button.
Four 3-digit numbers are displayed in different
colours.
The
button is used to switch between the LIST and
FLOF modes.
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a
different coloured button each time.
5
Press the
(store) button until the corresponding blocks blink.
BP68-00280A (J59A_Euro_ENG)
4/14/04
10:22 AM
Page 55
Connecting to the External Input/Outputs
➢
◆
EXT1 is used for the equipment with an RGB output, such as video game devices or video disc
players.
◆
If your externl device is connected to the COMPONENT IN video will not be output and only audio
will be output from EXT2.
Rear of the TV
①
or
VCR
②
DVD
or
③
Decoder /
Video game device
① This end can be fitted with:
Video disc player
② If you have a second VCR and wish to copy cassette tape, connect the
Satellite receiver
◆ A SCART connector
◆ An S-Video connector and two audio RCA connectors (L+R); EXT 2
◆ Three RCA connectors (VIDEO + AUDIO-L and R)
source VCR to EXT1 and the target VCR to EXT2 so that you can redirect
the signal from EXT1 to EXT2.
③ If you have a decoder, connect the decoder to the VCR and the VCR to
➃
the television.
➃ When you wish to record a programme, connect the receiver to EXT1 and
the VCR to EXT2 so that you can redirect the signal from EXT1 to EXT2.
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment
for detailed connection instructions and associated safety
precautions.
English - 55
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 56
Connecting to the Audio Output
➢
The RCA (AUDIO OUT-L and R) connectors are used for equipment, such as an audio system
(to take full advantage of the Surround sound effect).
Rear of the TV
Audio system
Connecting to the RCA Input
➢
The RCA (VIDEO + AUDIO-L and R) connectors are used for the equipment, such as camcorders,
video disc players, and some video game devices.
Side of the TV
(depending on the model)
Camcorder
Video game device
Video disc player
English - 56
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 57
Connecting to the S-Video Input
➢
The S-VIDEO INPUT and RCA (AUDIO-L and R) connectors are used for equipment with an S-Video
output, such as a camcorder or VCR.
Side of the TV
(depending on the model)
①
Camcorder
VCR
and
① To play pictures and sound, both the S-VIDEO INPUT and RCA connectors must be used.
Connecting to the Component Input
Rear of the TV
DVD
DTV receiver
➢
The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output.
(480i, 480p, 576i,576p, 1080i)
English - 57
BP68-00280A (J59A_Euro_ENG)
4/14/04
11:41 AM
Page 58
Redirecting an Input to the External Output
Your television enables you to choose which audio/video signals
are output to the external connector.
Setup
TV
▲ More
√
AV Setup
1
Press the MENU (
Result:
2
Enter
Return
AV Setup
TV
Ext.1
: TV
√
Ext.2
: Monitor Out
√
Ext.3
: TV
√
Press the ENTER (
4
Press the ▲ or ▼ button until the AV Setup is selected. Press the
ENTER (
) button.
Result:
Return
The AV Setup menu is displayed with the Ext.3 is
selected.
Ext.1 : Default (TV)
Ext.2 : Default (Monitor Out)
Ext.3 : Variable (TV, Ext1, Ext2, AV)
√
Ext.1
: TV
Ext.2
: Monitor Out
Ext.3
: TV
TV
√
√
Ext.1
Ext.2
AV
Move
) button.
Press the ENTER (
) button. Select the source to be directed to
the output of Ext.3 by pressing the ▲ or ▼ button.
➢
AV Setup
TV
The options available in the Setup group are
displayed.
3
5
Enter
The main menu is displayed.
Press the ▲ or ▼ button until the Setup is selected.
Result:
Move
) button.
Enter
English - 58
Return
6
Press the ENTER (
) button to confirm your choice.
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 59
Programming the Remote Control for Other Components
Your TV comes equipped with a universal remote control. In
addition to controlling the TV, the universal remote control can
also operate a VCR, Cable box, DVD and Set-Top Box made by
Samsung (even if your VCR, Cable box and DVD are made by
manufacturers other than Samsung).
➢
The remote control might not be compatible with all
VCRs, DVD players and Cable boxes.
1
Turn off your VCR (Cable box or DVD).
2
Press the SELECT button to switch the remote control to the VCR
(CATV or DVD) mode.
➢
VCR
The remote control has five modes : TV, VCR, CATV, DVD
and STB)
3
Press the SET button.
4
Enter 3 digits of the VCR (Cable box or DVD) code listed on next
page for your VCR (Cable box or DVD).
Example: To enter the code “6”, press 0, 0, and 6.
To enter the code “76”, press 0, 7, and 6.
5
Press the POWER ( ) button. Your VCR (Cable box or DVD)
should turn on. If it turns on, your remote control is now set
correctly.
➢
6
If it does not turn on, repeat steps above, but try one of the
other codes listed for the brand of particular yours.
Once your remote control is set up, press the SELECT button any
time you want to use the remote control to operate VCR (Cable
box or DVD).
➢
◆ When your remote control is in the VCR, CATV, DVD or
STB mode, the volume buttons still control your
television’s volume.
◆ When your remote control is in the TV mode, the VCR or
DVD control buttons (rewind, stop, play/pause and fast
forword) still operate your VCR or DVD.
English - 59
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 60
Programming the Remote Control for Other Components
VCR Remote Control Codes
Admiral
020
Marantz
Aiwa
025
Marta
006
Akai
004, 027, 032
MEI
021
Audio Dynamics
Bell&Howell
Broksonic
Candle
007, 026
MGA
022
Midland
005
002, 003, 006, 008, 015, 055
Minolta
019, 041
021, 056
Citizen
002, 003, 006, 008, 015, 055
Craig
Curtis Mathes
007
002, 024
002, 007, 008, 017, 021, 025, 056, 064,
066
Daewoo
DBX
006, 021, 024, 025
018
Canon
Colortyme
Memorex
007, 008, 018, 021, 026, 036, 037, 062
003, 010, 011, 012, 013, 014, 015, 016
007, 026
Mitsubishi
Montgomery Ward
MTC
Multitech
NEC
Optimus
Panasonic
Pentax
034
019, 034, 041, 046
020
002, 025
002, 005, 025, 038
007, 008, 018, 026, 037, 062, 064
020
021, 056, 071, 072
019, 041
017
Pentex Research
Dynatech
034
Philco
021, 036, 056, 059
Emerson
001, 003, 006, 021, 022, 025, 030, 032,
Philips
021, 036
034, 040, 047, 050, 052, 060, 063, 065,
Pioneer
019, 026, 039, 053
066, 067, 069
Portland
015, 049, 055
Dimensia
008
Fisher
018, 024, 028, 029, 048, 051, 061
PROSCAN
017
Funai
025
Quartz
018
002, 005, 017, 021, 056
Quasar
General Electric
Go Video
LG (Goldstar)
Harman Kardon
Hitachi
Instant Replay
JC Penny
JVC
Kenwood
002
006, 018, 020, 021, 024, 025, 029,
RCA
002, 017, 019, 021, 035, 041, 043,
006, 007, 008, 009, 010
007
034, 048, 056
019, 025, 041, 042
021
021, 056
Radio Shack/Realistic
057, 068
Samsung
002, 007, 018, 019, 021, 026, 037, 041,
Sansui
054, 056
Sanyo
000, 001, 002, 003, 004, 005
026
018, 024
007, 008, 018, 021, 026, 037
Scott
003, 047, 052, 067
007, 008, 018, 026, 037
Sears
006, 018, 019, 024, 028, 029, 041,
KLH
070
Lioyd
025
Sharp
020, 034, 045, 015
Logik
038
Shimom
027, 033, 038, 058
025
Signature
LXI
Magnavox
English - 60
021, 036, 056, 059
048, 051
Sony
025
027, 033, 044
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 61
Programming the Remote Control for Other Components
VCR Remote Control Codes (continued)
Sylvania
Symphonic
Tandy
021, 025, 036, 056, 059
025
018, 025
Totevision
006
Victor
Tatung
037
Video Concepts
Technics
Teknika
TMK
Toshiba
025, 037, 068
021
002
Vector Research
Tashika
Teac
002, 006
Unitech
007, 026
026
007, 026
002
Videosonic
Wards
002, 003, 006, 019, 020, 021, 024, 025,
006, 021, 025, 031
066
003, 019, 029, 051, 052
034, 038, 041
Yamaha
Zenith
007, 008, 018, 026, 037
023, 027, 033, 073
Cable Box (CATV) Remote Control Codes
Anvision
GI
017, 018
041
Regency
SA
015, 023
042, 043
Hamlin
003, 024, 031
Hitachi
025, 030
Scientific Atlanta
Jerrold
038, 039
Sprucer
022
025, 030
Macom
Magnavox
Oak
Panasonic
Samsung
000, 001, 002, 003, 004, 005, 006, 007
042, 043
Stargate 2000
036
019, 023, 028
Sylvania
016
026
Texscan
016
Tocom
032
003, 022, 027, 037, 044
Philips
019, 021, 023, 028
Universal
033, 034
Pioneer
004, 018, 020, 044
Viewstar
019, 021, 023, 028
RCA
Regal
014, 022, 040
003
046
Wamer amex
Zenith
017, 029, 035, 037, 045
DVD Remote Control Codes
Samsung
LG (Goldstar)
006
JVC
000, 001
002
Sony
007
PROSCAN/RCA
003
Denon
008
Panasonic
005
Curtis Mathes
009
English - 61
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 62
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “ I ” button (On/Off) and the
POWER ( ) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
Normal picture but no sound
◆ Check the volume.
◆ Check whether the volume MUTE (
has been pressed.
) button on the remote control
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television,
then move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
English - 62
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 63
Memo
English - 63
BP68-00280A (J59A_Euro_ENG)
4/13/04
2:00 PM
Page 64
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent
if a change in the performance of your product indicates
that a faulty condition may be present.
ELECTRONICS
BP68-00280A-00
Download PDF

advertising